Wifi bağlanmıyor

[deniz0715]

Merhaba Arkadaşlar Ubuntuyu ilk kurduğumda sıkıntı yoktu gayet güzel wifi ile bağlanabiliyordum

sonra birden wifi birdaha bağlanmaz oldu leptobumda wifi cihazını denedim çalışıyor pc dede çalışıyor wifi yi buluyorum şifremi yazıp bağlana tıklıyorum ama bağlanmıyor

hiç bir şey olmuyor internette baya araştırdım ingilizcem yetersiz kaldı türkçe bir sayfada

/etc/pcmcia/config.opts dosyasında bazı yerleri değiştirmem gerektiğni gördüm değiştirmeye çalıştığımda kaydedemiyorum erişim engellendi diyor ne yapmam gerek

lütfen acil yardım ederseniz sevinirim

[heartsmagic]

Çalışmayan kablosuz masaüstü makinede mi?
Dün güncelleme aldın mı, son olarak sistemde neler yaptın?
Şu konudaki çıktıları buraya kod etiketi içinde aktar lütfen: agkomut
Kod etiketi için: kodetiketi

[deniz0715]

evet masaüstü makinede farklı cihazda çalışıyor yani kullandığım makinedede çalışıyor ama bağlanmıyor bugün sisteme


sudo apt-get update
sudo apt-get install
sudo apt-get upgrade

kodlarıyla güncelledim 

hala aynı 

cat /etc/lsb-release

Kod Seç Genişlet

DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=14.04DISTRIB_CODENAME=trustyDISTRIB_DESCRIPTION="Ubuntu 14.04.3 LTS"
uname -a

Kod Seç Genişlet

Linux deniz-GA-78LMT-S2P 3.19.0-28-generic #30~14.04.1-Ubuntu SMP Tue Sep 1 09:32:55 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux
lspci

Kod Seç Genişlet

00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] RS780 Host Bridge
00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780 PCI to PCI bridge (ext gfx port 0)
00:06.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] RS780 PCI to PCI bridge (PCIE port 2)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode]
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 3c)
00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 IDE Controller
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control
01:00.0 VGA compatible controller: NVIDIA Corporation G92 [GeForce 9800 GT] (rev a2)
02:00.0 Ethernet controller: Qualcomm Atheros AR8151 v2.0 Gigabit Ethernet (rev c0)


lsusb

Kod Seç Genişlet

Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 006: ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN AdapterBus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubBus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubBus 005 Device 002: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/WriterBus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubBus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubBus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubBus 003 Device 002: ID 1bcf:0005 Sunplus Innovation Technology Inc. Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
rfkill list

Kod Seç Genişlet

3: phy3: Wireless LAN
   Soft blocked: no
   Hard blocked: no


sudo lshw -C network

Kod Seç Genişlet

*-network               
       açıklama: Eternet interface
       ürün: AR8151 v2.0 Gigabit Ethernet
       üretici: Qualcomm Atheros
       physical id: 0
       bus info: pci@0000:02:00.0
       mantıksal ad: eth0
       sürüm: c0
       serial: 90:2b:34:ad:bb:44
       boyut: 100Mbit/s
       kapasite: 1Gbit/s
       genişlik: 64 bits
       saat: 33MHz
       kapasiteler: pm msi pciexpress vpd bus_master cap_list eternet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
       yapılandırma: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.1-NAPI duplex=full ip=192.168.1.9 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s
       kaynaklar: irq:26 bellek:fdcc0000-fdcfffff ioport:df00(boyut=128)
  *-network
       açıklama: Kablosuz arayüz
       physical id: 1
       bus info: usb@2:4
       mantıksal ad: wlan0
       serial: 64:70:02:2b:1c:d3
       kapasiteler: eternet physical wireless
       yapılandırma: broadcast=yes driver=rtl8192cu driverversion=3.19.0-28-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11bgn



[heartsmagic]

Komutların tamamının çıktısını geçmemişsin buraya. Eksik olanları da geç ki yardımcı olacaklara fikir verebilsin.

[deniz0715]

ifconfig

Kod Seç Genişlet

eth0      Link encap:Ethernet  HWaddr 90:2b:34:ad:bb:44 
          inet addr:192.168.1.9  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::922b:34ff:fead:bb44/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1448002 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1075721 errors:0 dropped:0 overruns:0 carrier:1
          collisions:0 txqueuelen:1000
          RX bytes:1533548424 (1.5 GB)  TX bytes:141143775 (141.1 MB)
lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Sunucu
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:5826451 errors:0 dropped:0 overruns:0 frame:0
          TX packets:5826451 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:359082038 (359.0 MB)  TX bytes:359082038 (359.0 MB)
wlan0     Link encap:Ethernet  HWaddr 64:70:02:2b:1c:d3 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)





Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 23 Ekim 2015 - 15:27:23
1dk karışıyorda ondan tek tek yolluyorum


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 23 Ekim 2015 - 15:31:42
iwconfig

Kod Seç Genişlet

eth0      no wireless extensions.
wlan0     IEEE 802.11bgn  ESSID:off/any 
          Mode:Managed  Access Point: Not-Associated   Tx-Power=20 dBm   
          Retry short limit:7   RTS thr=2347 B   Fragment thr:off
          Power Management:off
         
lo        no wireless extensions.



iwlist scanning

Kod Seç Genişlet

eth0      no wireless extensions.
wlan0     IEEE 802.11bgn  ESSID:off/any            Mode:Managed  Access Point: Not-Associated   Tx-Power=20 dBm             Retry short limit:7   RTS thr=2347 B   Fragment thr:off          Power Management:off          lo        no wireless extensions.
deniz@deniz-GA-78LMT-S2P:~$ iwlist scanningeth0      Interface doesn't support scanning.
wlan0     No scan results
lo        Interface doesn't support scanning.
lsmod
Module                  Size  Used by



dmesg

Kod Seç Genişlet

[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB[    0.000000] reg 2, base: 3GB, range: 256MB, type WB[    0.000000] reg 3, base: 3326MB, range: 2MB, type UC[    0.000000] e820: update [mem 0xcfe00000-0xffffffff] usable ==> reserved[    0.000000] e820: last_pfn = 0xcfdf0 max_arch_pfn = 0x400000000[    0.000000] found SMP MP-table at [mem 0x000f5e00-0x000f5e0f] mapped at [ffff8800000f5e00][    0.000000] Scanning 1 areas for low memory corruption[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576[    0.000000] Using GB pages for direct mapping[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff][    0.000000]  [mem 0x00000000-0x000fffff] page 4k[    0.000000] BRK [0x01fd4000, 0x01fd4fff] PGTABLE[    0.000000] BRK [0x01fd5000, 0x01fd5fff] PGTABLE[    0.000000] BRK [0x01fd6000, 0x01fd6fff] PGTABLE[    0.000000] init_memory_mapping: [mem 0x12fe00000-0x12fffffff][    0.000000]  [mem 0x12fe00000-0x12fffffff] page 2M[    0.000000] BRK [0x01fd7000, 0x01fd7fff] PGTABLE[    0.000000] init_memory_mapping: [mem 0x120000000-0x12fdfffff][    0.000000]  [mem 0x120000000-0x12fdfffff] page 2M[    0.000000] init_memory_mapping: [mem 0x100000000-0x11fffffff][    0.000000]  [mem 0x100000000-0x11fffffff] page 2M[    0.000000] init_memory_mapping: [mem 0x00100000-0xcfdeffff][    0.000000]  [mem 0x00100000-0x001fffff] page 4k[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M[    0.000000]  [mem 0x40000000-0xbfffffff] page 1G[    0.000000]  [mem 0xc0000000-0xcfbfffff] page 2M[    0.000000]  [mem 0xcfc00000-0xcfdeffff] page 4k[    0.000000] RAMDISK: [mem 0x35a2c000-0x36d0dfff][    0.000000] ACPI: Early table checksum verification disabled[    0.000000] ACPI: RSDP 0x00000000000F7810 000014 (v00 GBT   )[    0.000000] ACPI: RSDT 0x00000000CFDF3000 000040 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)[    0.000000] ACPI: FACP 0x00000000CFDF3080 000074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)[    0.000000] ACPI: DSDT 0x00000000CFDF3100 006398 (v01 GBT    GBTUACPI 00001000 MSFT 03000000)[    0.000000] ACPI: FACS 0x00000000CFDF0000 000040[    0.000000] ACPI: SSDT 0x00000000CFDF9580 00095E (v01 PTLTD  POWERNOW 00000001  LTP 00000001)[    0.000000] ACPI: MSDM 0x00000000CFDF9F00 000055 (v03 GBT    GBTUACPI 42302E31 GBTU 01010101)[    0.000000] ACPI: HPET 0x00000000CFDF9F80 000038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)[    0.000000] ACPI: MCFG 0x00000000CFDF9FC0 00003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)[    0.000000] ACPI: TAMG 0x00000000CFDFA000 0000A2 (v01 GBT    GBT   B0 5455312E BG?? 45240101)[    0.000000] ACPI: APIC 0x00000000CFDF94C0 0000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)[    0.000000] ACPI: Local APIC address 0xfee00000[    0.000000] Scanning NUMA topology in Northbridge 24[    0.000000] No NUMA configuration found[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000012fffffff][    0.000000] NODE_DATA(0) allocated [mem 0x12fff9000-0x12fffdfff][    0.000000]  [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0[    0.000000] Zone ranges:[    0.000000]   DMA      [mem 0x00001000-0x00ffffff][    0.000000]   DMA32    [mem 0x01000000-0xffffffff][    0.000000]   Normal   [mem 0x100000000-0x12fffffff][    0.000000] Movable zone start for each node[    0.000000] Early memory node ranges[    0.000000]   node   0: [mem 0x00001000-0x0009efff][    0.000000]   node   0: [mem 0x00100000-0xcfdeffff][    0.000000]   node   0: [mem 0x100000000-0x12fffffff][    0.000000] Initmem setup node 0 [mem 0x00001000-0x12fffffff][    0.000000] On node 0 totalpages: 1047950[    0.000000]   DMA zone: 64 pages used for memmap[    0.000000]   DMA zone: 21 pages reserved[    0.000000]   DMA zone: 3998 pages, LIFO batch:0[    0.000000]   DMA32 zone: 13240 pages used for memmap[    0.000000]   DMA32 zone: 847344 pages, LIFO batch:31[    0.000000]   Normal zone: 3072 pages used for memmap[    0.000000]   Normal zone: 196608 pages, LIFO batch:31[    0.000000] ACPI: PM-Timer IO Port: 0x4008[    0.000000] ACPI: Local APIC address 0xfee00000[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])[    0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)[    0.000000] ACPI: IRQ0 used by override.[    0.000000] ACPI: IRQ9 used by override.[    0.000000] Using ACPI (MADT) for SMP configuration information[    0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000[    0.000000] smpboot: Allowing 8 CPUs, 6 hotplug CPUs[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff][    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff][    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff][    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff][    0.000000] PM: Registered nosave memory: [mem 0xcfdf0000-0xcfdf2fff][    0.000000] PM: Registered nosave memory: [mem 0xcfdf3000-0xcfdfffff][    0.000000] PM: Registered nosave memory: [mem 0xcfe00000-0xcfefffff][    0.000000] PM: Registered nosave memory: [mem 0xcff00000-0xdfffffff][    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff][    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff][    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff][    0.000000] e820: [mem 0xcff00000-0xdfffffff] available for PCI devices[    0.000000] Booting paravirtualized kernel on bare hardware[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1[    0.000000] PERCPU: Embedded 31 pages/cpu @ffff88012fc00000 s86144 r8192 d32640 u262144[    0.000000] pcpu-alloc: s86144 r8192 d32640 u262144 alloc=1*2097152[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1031553[    0.000000] Policy zone: Normal[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.19.0-28-generic root=UUID=b3c9f803-6dca-4935-9c62-27bc36754bea ro quiet splash[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)[    0.000000] AGP: Checking aperture...[    0.000000] AGP: No AGP bridge found[    0.000000] AGP: Node 0: aperture [bus addr 0xfffe000000-0xffffffffff] (32MB)[    0.000000] Aperture beyond 4GB. Ignoring.[    0.000000] AGP: Your BIOS doesn't leave a aperture memory hole[    0.000000] AGP: Please enable the IOMMU option in the BIOS setup[    0.000000] AGP: This costs you 64MB of RAM[    0.000000] AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff] (65536KB)[    0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff][    0.000000] Memory: 3957756K/4191800K available (7918K kernel code, 1174K rwdata, 3756K rodata, 1408K init, 1292K bss, 234044K reserved, 0K cma-reserved)[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1[    0.000000] Hierarchical RCU implementation.[    0.000000]    RCU dyntick-idle grace-period acceleration is enabled.[    0.000000]    RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8[    0.000000] NR_IRQS:16640 nr_irqs:488 16[    0.000000]    Offload RCU callbacks from all CPUs[    0.000000]    Offload RCU callbacks from CPUs: 0-7.[    0.000000] spurious 8259A interrupt: IRQ7.[    0.000000] Console: colour VGA+ 80x25[    0.000000] console [tty0] enabled[    0.000000] hpet clockevent registered[    0.000000] tsc: Fast TSC calibration using PIT[    0.000000] tsc: Detected 3360.154 MHz processor[    0.000025] Calibrating delay loop (skipped), value calculated using timer frequency.. 6720.30 BogoMIPS (lpj=13440616)[    0.000027] pid_max: default: 32768 minimum: 301[    0.000033] ACPI: Core revision 20141107[    0.002212] ACPI: All ACPI Tables successfully acquired[    0.002229] Security Framework initialized[    0.002242] AppArmor: AppArmor initialized[    0.002242] Yama: becoming mindful.[    0.002461] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)[    0.003344] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)[    0.003792] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)[    0.003799] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)[    0.003984] Initializing cgroup subsys memory[    0.003990] Initializing cgroup subsys devices[    0.003992] Initializing cgroup subsys freezer[    0.003994] Initializing cgroup subsys net_cls[    0.003996] Initializing cgroup subsys blkio[    0.003998] Initializing cgroup subsys perf_event[    0.004000] Initializing cgroup subsys net_prio[    0.004002] Initializing cgroup subsys hugetlb[    0.004018] CPU: Physical Processor ID: 0[    0.004019] CPU: Processor Core ID: 0[    0.004021] mce: CPU supports 6 MCE banks[    0.004025] LVT offset 0 assigned for vector 0xf9[    0.004029] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8[    0.004029] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0[    0.004102] Freeing SMP alternatives memory: 32K (ffffffff81e87000 - ffffffff81e8f000)[    0.016131] ftrace: allocating 30014 entries in 118 pages[    0.325716] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1[    0.365436] smpboot: CPU0: AMD Athlon(tm) II X2 240 Processor (fam: 10, model: 06, stepping: 02)[    0.471978] Performance Events: AMD PMU driver.[    0.471981] ... version:                0[    0.471982] ... bit width:              48[    0.471983] ... generic registers:      4[    0.471984] ... value mask:             0000ffffffffffff[    0.471985] ... max period:             00007fffffffffff[    0.471986] ... fixed-purpose events:   0[    0.471986] ... event mask:             000000000000000f[    0.472591] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.[    0.472669] x86: Booting SMP configuration:[    0.472670] .... node  #0, CPUs:      #1[    0.485720] x86: Booted up 1 node, 2 CPUs[    0.485722] smpboot: Total of 2 processors activated (13440.61 BogoMIPS)[    0.486268] devtmpfs: initialized[    0.488901] evm: security.selinux[    0.488903] evm: security.SMACK64[    0.488903] evm: security.SMACK64EXEC[    0.488904] evm: security.SMACK64TRANSMUTE[    0.488905] evm: security.SMACK64MMAP[    0.488905] evm: security.ima[    0.488906] evm: security.capability[    0.488971] PM: Registering ACPI NVS region [mem 0xcfdf0000-0xcfdf2fff] (12288 bytes)[    0.489085] pinctrl core: initialized pinctrl subsystem[    0.489178] RTC time:  8:18:19, date: 10/23/15[    0.489269] NET: Registered protocol family 16[    0.496032] cpuidle: using governor ladder[    0.501793] cpuidle: using governor menu[    0.501804] node 0 link 0: io port [c000, ffff][    0.501806] TOM: 00000000d0000000 aka 3328M[    0.501808] Fam 10h mmconf [mem 0xe0000000-0xe00fffff][    0.501809] node 0 link 0: mmio [a0000, bffff][    0.501811] node 0 link 0: mmio [d0000000, dfffffff][    0.501813] node 0 link 0: mmio [f0000000, fe02ffff][    0.501814] node 0 link 0: mmio [e0000000, e03fffff] ==> [e0100000, e03fffff][    0.501816] TOM2: 0000000130000000 aka 4864M[    0.501817] bus: [bus 00-03] on node 0 link 0[    0.501818] bus: 00 [io  0x0000-0xffff][    0.501819] bus: 00 [mem 0x000a0000-0x000bffff][    0.501820] bus: 00 [mem 0xd0000000-0xdfffffff][    0.501821] bus: 00 [mem 0xe0400000-0xffffffff][    0.501822] bus: 00 [mem 0xe0100000-0xe03fffff][    0.501823] bus: 00 [mem 0x130000000-0xfcffffffff][    0.501887] ACPI: bus type PCI registered[    0.501889] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5[    0.501962] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)[    0.501964] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820[    0.502260] PCI: Using configuration type 1 for base access[    0.506248] ACPI: Added _OSI(Module Device)[    0.506251] ACPI: Added _OSI(Processor Device)[    0.506252] ACPI: Added _OSI(3.0 _SCP Extensions)[    0.506253] ACPI: Added _OSI(Processor Aggregator Device)[    0.509438] ACPI: Interpreter enabled[    0.509447] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)[    0.509450] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)[    0.509460] ACPI: (supports S0 S3 S4 S5)[    0.509461] ACPI: Using IOAPIC for interrupt routing[    0.509516] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug[    0.512259] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])[    0.512264] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI][    0.512267] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM[    0.512453] PCI host bridge to bus 0000:00[    0.512456] pci_bus 0000:00: root bus resource [bus 00-ff][    0.512457] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7][    0.512459] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff][    0.512460] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff][    0.512461] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff][    0.512463] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff][    0.512471] pci 0000:00:00.0: [1022:9600] type 00 class 0x060000[    0.512479] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size)[    0.512551] pci 0000:00:02.0: [1022:9603] type 01 class 0x060400[    0.512581] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold[    0.512609] pci 0000:00:02.0: System wakeup disabled by ACPI[    0.512640] pci 0000:00:06.0: [1022:9606] type 01 class 0x060400[    0.512669] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold[    0.512696] pci 0000:00:06.0: System wakeup disabled by ACPI[    0.512739] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f[    0.512757] pci 0000:00:11.0: reg 0x10: [io  0xff00-0xff07][    0.512765] pci 0000:00:11.0: reg 0x14: [io  0xfe00-0xfe03][    0.512774] pci 0000:00:11.0: reg 0x18: [io  0xfd00-0xfd07][    0.512782] pci 0000:00:11.0: reg 0x1c: [io  0xfc00-0xfc03][    0.512791] pci 0000:00:11.0: reg 0x20: [io  0xfb00-0xfb0f][    0.512799] pci 0000:00:11.0: reg 0x24: [mem 0xfe02f000-0xfe02f3ff][    0.512818] pci 0000:00:11.0: set SATA to AHCI mode[    0.512898] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310[    0.512910] pci 0000:00:12.0: reg 0x10: [mem 0xfe02e000-0xfe02efff][    0.512985] pci 0000:00:12.0: System wakeup disabled by ACPI[    0.513013] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310[    0.513025] pci 0000:00:12.1: reg 0x10: [mem 0xfe02d000-0xfe02dfff][    0.513101] pci 0000:00:12.1: System wakeup disabled by ACPI[    0.513134] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320[    0.513151] pci 0000:00:12.2: reg 0x10: [mem 0xfe02c000-0xfe02c0ff][    0.513228] pci 0000:00:12.2: supports D1 D2[    0.513229] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot[    0.513260] pci 0000:00:12.2: System wakeup disabled by ACPI[    0.513293] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310[    0.513304] pci 0000:00:13.0: reg 0x10: [mem 0xfe02b000-0xfe02bfff][    0.513380] pci 0000:00:13.0: System wakeup disabled by ACPI[    0.513408] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310[    0.513420] pci 0000:00:13.1: reg 0x10: [mem 0xfe02a000-0xfe02afff][    0.513496] pci 0000:00:13.1: System wakeup disabled by ACPI[    0.513528] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320[    0.513546] pci 0000:00:13.2: reg 0x10: [mem 0xfe029000-0xfe0290ff][    0.513623] pci 0000:00:13.2: supports D1 D2[    0.513624] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot[    0.513655] pci 0000:00:13.2: System wakeup disabled by ACPI[    0.513690] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500[    0.513822] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a[    0.513836] pci 0000:00:14.1: reg 0x10: [io  0x0000-0x0007][    0.513845] pci 0000:00:14.1: reg 0x14: [io  0x0000-0x0003][    0.513853] pci 0000:00:14.1: reg 0x18: [io  0x0000-0x0007][    0.513861] pci 0000:00:14.1: reg 0x1c: [io  0x0000-0x0003][    0.513870] pci 0000:00:14.1: reg 0x20: [io  0xfa00-0xfa0f][    0.513888] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7][    0.513889] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io  0x03f6][    0.513891] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177][    0.513892] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io  0x0376][    0.513966] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300[    0.513985] pci 0000:00:14.2: reg 0x10: [mem 0xfe024000-0xfe027fff 64bit][    0.514047] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold[    0.514076] pci 0000:00:14.2: System wakeup disabled by ACPI[    0.514104] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100[    0.514213] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401[    0.514268] pci 0000:00:14.4: System wakeup disabled by ACPI[    0.514296] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310[    0.514308] pci 0000:00:14.5: reg 0x10: [mem 0xfe028000-0xfe028fff][    0.514383] pci 0000:00:14.5: System wakeup disabled by ACPI[    0.514413] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000[    0.514462] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000[    0.514508] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000[    0.514555] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000[    0.514603] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000[    0.514689] pci 0000:01:00.0: [10de:0614] type 00 class 0x030000[    0.514696] pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff][    0.514703] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref][    0.514710] pci 0000:01:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit][    0.514714] pci 0000:01:00.0: reg 0x24: [io  0xef00-0xef7f][    0.514719] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref][    0.520032] pci 0000:00:02.0: PCI bridge to [bus 01][    0.520038] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff][    0.520040] pci 0000:00:02.0:   bridge window [mem 0xf8000000-0xfbffffff][    0.520043] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref][    0.520111] pci 0000:02:00.0: [1969:1083] type 00 class 0x020000[    0.520134] pci 0000:02:00.0: reg 0x10: [mem 0xfdcc0000-0xfdcfffff 64bit][    0.520144] pci 0000:02:00.0: reg 0x18: [io  0xdf00-0xdf7f][    0.520245] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold[    0.528042] pci 0000:00:06.0: PCI bridge to [bus 02][    0.528048] pci 0000:00:06.0:   bridge window [io  0xd000-0xdfff][    0.528050] pci 0000:00:06.0:   bridge window [mem 0xfdc00000-0xfdcfffff][    0.528053] pci 0000:00:06.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref][    0.528138] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)[    0.528142] pci 0000:00:14.4:   bridge window [io  0xc000-0xcfff][    0.528145] pci 0000:00:14.4:   bridge window [mem 0xfde00000-0xfdefffff][    0.528149] pci 0000:00:14.4:   bridge window [mem 0xfdd00000-0xfddfffff pref][    0.528151] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)[    0.528152] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)[    0.528153] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)[    0.528155] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)[    0.528156] pci 0000:00:14.4:   bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)[    0.528170] pci_bus 0000:00: on NUMA node 0[    0.528354] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.[    0.528388] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.[    0.528420] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.[    0.528454] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.[    0.528484] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.[    0.528514] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.[    0.528544] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.[    0.528573] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.[    0.529035] vgaarb: setting as boot device: PCI:0000:01:00.0[    0.529037] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none[    0.529038] vgaarb: loaded[    0.529039] vgaarb: bridge control possible 0000:01:00.0[    0.529243] SCSI subsystem initialized[    0.529302] libata version 3.00 loaded.[    0.529321] ACPI: bus type USB registered[    0.529338] usbcore: registered new interface driver usbfs[    0.529345] usbcore: registered new interface driver hub[    0.529355] usbcore: registered new device driver usb[    0.529463] PCI: Using ACPI for IRQ routing[    0.537445] PCI: pci_cache_line_size set to 64 bytes[    0.537490] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff][    0.537492] e820: reserve RAM buffer [mem 0xcfdf0000-0xcfffffff][    0.537583] NetLabel: Initializing[    0.537584] NetLabel:  domain hash size = 128[    0.537585] NetLabel:  protocols = UNLABELED CIPSOv4[    0.537593] NetLabel:  unlabeled traffic allowed by default[    0.537671] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0[    0.537674] hpet0: 4 comparators, 32-bit 14.318180 MHz counter[    0.539728] Switched to clocksource hpet[    0.544401] AppArmor: AppArmor Filesystem Enabled[    0.544463] pnp: PnP ACPI init[    0.544551] system 00:00: [io  0x04d0-0x04d1] has been reserved[    0.544553] system 00:00: [io  0x0220-0x0225] has been reserved[    0.544555] system 00:00: [io  0x0290-0x0294] has been reserved[    0.544557] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)[    0.544750] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref][    0.544766] system 00:01: [io  0x4100-0x411f] has been reserved[    0.544768] system 00:01: [io  0x0228-0x022f] has been reserved[    0.544769] system 00:01: [io  0x040b] has been reserved[    0.544771] system 00:01: [io  0x04d6] has been reserved[    0.544772] system 00:01: [io  0x0c00-0x0c01] has been reserved[    0.544773] system 00:01: [io  0x0c14] has been reserved[    0.544775] system 00:01: [io  0x0c50-0x0c52] has been reserved[    0.544776] system 00:01: [io  0x0c6c-0x0c6d] has been reserved[    0.544778] system 00:01: [io  0x0c6f] has been reserved[    0.544779] system 00:01: [io  0x0cd0-0x0cd1] has been reserved[    0.544781] system 00:01: [io  0x0cd2-0x0cd3] has been reserved[    0.544782] system 00:01: [io  0x0cd4-0x0cdf] has been reserved[    0.544784] system 00:01: [io  0x4000-0x40fe] could not be reserved[    0.544785] system 00:01: [io  0x4210-0x4217] has been reserved[    0.544787] system 00:01: [io  0x0b00-0x0b0f] has been reserved[    0.544788] system 00:01: [io  0x0b10-0x0b1f] has been reserved[    0.544789] system 00:01: [io  0x0b20-0x0b3f] has been reserved[    0.544791] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved[    0.544793] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)[    0.544900] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)[    0.545133] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)[    0.545172] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)[    0.545215] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved[    0.545217] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)[    0.545345] system 00:06: [mem 0x000cd400-0x000cffff] has been reserved[    0.545347] system 00:06: [mem 0x000f0000-0x000f7fff] could not be reserved[    0.545349] system 00:06: [mem 0x000f8000-0x000fbfff] could not be reserved[    0.545350] system 00:06: [mem 0x000fc000-0x000fffff] could not be reserved[    0.545352] system 00:06: [mem 0xcfdf0000-0xcfdfffff] could not be reserved[    0.545353] system 00:06: [mem 0xffff0000-0xffffffff] has been reserved[    0.545355] system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved[    0.545356] system 00:06: [mem 0x00100000-0xcfdeffff] could not be reserved[    0.545358] system 00:06: [mem 0xcfe00000-0xcfefffff] has been reserved[    0.545359] system 00:06: [mem 0xcff00000-0xcfffffff] could not be reserved[    0.545361] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved[    0.545362] system 00:06: [mem 0xfee00000-0xfee00fff] could not be reserved[    0.545364] system 00:06: [mem 0xfff80000-0xfffeffff] has been reserved[    0.545366] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)[    0.545380] pnp: PnP ACPI: found 7 devices[    0.551653] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb01ffff pref][    0.551655] pci 0000:00:02.0: PCI bridge to [bus 01][    0.551657] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff][    0.551659] pci 0000:00:02.0:   bridge window [mem 0xf8000000-0xfbffffff][    0.551661] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref][    0.551664] pci 0000:00:06.0: PCI bridge to [bus 02][    0.551665] pci 0000:00:06.0:   bridge window [io  0xd000-0xdfff][    0.551668] pci 0000:00:06.0:   bridge window [mem 0xfdc00000-0xfdcfffff][    0.551669] pci 0000:00:06.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref][    0.551672] pci 0000:00:14.4: PCI bridge to [bus 03][    0.551674] pci 0000:00:14.4:   bridge window [io  0xc000-0xcfff][    0.551679] pci 0000:00:14.4:   bridge window [mem 0xfde00000-0xfdefffff][    0.551682] pci 0000:00:14.4:   bridge window [mem 0xfdd00000-0xfddfffff pref][    0.551688] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7][    0.551689] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff][    0.551691] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff][    0.551692] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff][    0.551693] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff][    0.551695] pci_bus 0000:01: resource 0 [io  0xe000-0xefff][    0.551696] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff][    0.551697] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref][    0.551699] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff][    0.551700] pci_bus 0000:02: resource 1 [mem 0xfdc00000-0xfdcfffff][    0.551702] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref][    0.551703] pci_bus 0000:03: resource 0 [io  0xc000-0xcfff][    0.551704] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff][    0.551706] pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff pref][    0.551707] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7][    0.551708] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff][    0.551709] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff][    0.551711] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff][    0.551712] pci_bus 0000:03: resource 8 [mem 0xd0000000-0xfebfffff][    0.551734] NET: Registered protocol family 2[    0.551887] TCP established hash table entries: 32768 (order: 6, 262144 bytes)[    0.551967] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)[    0.552072] TCP: Hash tables configured (established 32768 bind 32768)[    0.552102] TCP: reno registered[    0.552109] UDP hash table entries: 2048 (order: 4, 65536 bytes)[    0.552129] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)[    0.552199] NET: Registered protocol family 1[    0.912184] pci 0000:01:00.0: Video device with shadowed ROM[    0.912191] PCI: CLS 64 bytes, default 64[    0.912255] Trying to unpack rootfs image as initramfs...[    1.154394] Freeing initrd memory: 19336K (ffff880035a2c000 - ffff880036d0e000)[    1.154590] PCI-DMA: Disabling AGP.[    1.154657] PCI-DMA: aperture base @ c4000000 size 65536 KB[    1.154658] PCI-DMA: using GART IOMMU.[    1.154660] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture[    1.156827] microcode: CPU0: patch_level=0x010000c7[    1.156841] microcode: CPU1: patch_level=0x010000c7[    1.156905] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba[    1.156908] LVT offset 1 assigned for vector 0x400[    1.156914] IBS: LVT offset 1 assigned[    1.156927] perf: AMD IBS detected (0x0000001f)[    1.156945] Scanning for low memory corruption every 60 seconds[    1.157232] futex hash table entries: 2048 (order: 5, 131072 bytes)[    1.157264] Initialise system trusted keyring[    1.157283] audit: initializing netlink subsys (disabled)[    1.157300] audit: type=2000 audit(1445588298.748:1): initialized[    1.157636] HugeTLB registered 2 MB page size, pre-allocated 0 pages[    1.158806] zpool: loaded[    1.158808] zbud: loaded[    1.159000] VFS: Disk quotas dquot_6.5.2[    1.159041] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)[    1.159484] fuse init (API version 7.23)[    1.159654] Key type big_key registered[    1.160066] Key type asymmetric registered[    1.160069] Asymmetric key parser 'x509' registered[    1.160103] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)[    1.160138] io scheduler noop registered[    1.160140] io scheduler deadline registered (default)[    1.160165] io scheduler cfq registered[    1.160509] pci_hotplug: PCI Hot Plug PCI Core version: 0.5[    1.160521] pciehp: PCI Express Hot Plug Controller Driver version: 0.4[    1.160600] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0[    1.160604] ACPI: Power Button [PWRB][    1.160636] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1[    1.160638] ACPI: Power Button [PWRF][    1.160770] GHES: HEST is not enabled![    1.160852] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled[    1.181303] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A[    1.182586] Linux agpgart interface v0.103[    1.183948] brd: module loaded[    1.184655] loop: module loaded[    1.184843] libphy: Fixed MDIO Bus: probed[    1.184845] tun: Universal TUN/TAP device driver, 1.6[    1.184846] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>[    1.184908] PPP generic driver version 2.4.2[    1.184963] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver[    1.184966] ehci-pci: EHCI PCI platform driver[    1.185086] ehci-pci 0000:00:12.2: EHCI Host Controller[    1.185091] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1[    1.185094] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround[    1.185104] ehci-pci 0000:00:12.2: debug port 1[    1.185145] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe02c000[    1.196283] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00[    1.196348] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002[    1.196349] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1[    1.196351] usb usb1: Product: EHCI Host Controller[    1.196352] usb usb1: Manufacturer: Linux 3.19.0-28-generic ehci_hcd[    1.196353] usb usb1: SerialNumber: 0000:00:12.2[    1.196489] hub 1-0:1.0: USB hub found[    1.196494] hub 1-0:1.0: 6 ports detected[    1.196731] ehci-pci 0000:00:13.2: EHCI Host Controller[    1.196736] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2[    1.196739] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround[    1.196749] ehci-pci 0000:00:13.2: debug port 1[    1.196790] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe029000[    1.208295] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00[    1.208365] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002[    1.208367] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1[    1.208368] usb usb2: Product: EHCI Host Controller[    1.208370] usb usb2: Manufacturer: Linux 3.19.0-28-generic ehci_hcd[    1.208371] usb usb2: SerialNumber: 0000:00:13.2[    1.208509] hub 2-0:1.0: USB hub found[    1.208514] hub 2-0:1.0: 6 ports detected[    1.208644] ehci-platform: EHCI generic platform driver[    1.208656] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver[    1.208659] ohci-pci: OHCI PCI platform driver[    1.208780] ohci-pci 0000:00:12.0: OHCI PCI host controller[    1.208784] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3[    1.208814] ohci-pci 0000:00:12.0: irq 16, io mem 0xfe02e000[    1.268371] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001[    1.268374] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1[    1.268375] usb usb3: Product: OHCI PCI host controller[    1.268377] usb usb3: Manufacturer: Linux 3.19.0-28-generic ohci_hcd[    1.268378] usb usb3: SerialNumber: 0000:00:12.0[    1.268514] hub 3-0:1.0: USB hub found[    1.268521] hub 3-0:1.0: 3 ports detected[    1.268714] ohci-pci 0000:00:12.1: OHCI PCI host controller[    1.268718] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4[    1.268741] ohci-pci 0000:00:12.1: irq 16, io mem 0xfe02d000[    1.328424] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001[    1.328427] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1[    1.328428] usb usb4: Product: OHCI PCI host controller[    1.328429] usb usb4: Manufacturer: Linux 3.19.0-28-generic ohci_hcd[    1.328430] usb usb4: SerialNumber: 0000:00:12.1[    1.328569] hub 4-0:1.0: USB hub found[    1.328576] hub 4-0:1.0: 3 ports detected[    1.328767] ohci-pci 0000:00:13.0: OHCI PCI host controller[    1.328771] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5[    1.328808] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe02b000[    1.388466] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001[    1.388469] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1[    1.388470] usb usb5: Product: OHCI PCI host controller[    1.388472] usb usb5: Manufacturer: Linux 3.19.0-28-generic ohci_hcd[    1.388473] usb usb5: SerialNumber: 0000:00:13.0[    1.388611] hub 5-0:1.0: USB hub found[    1.388618] hub 5-0:1.0: 3 ports detected[    1.388811] ohci-pci 0000:00:13.1: OHCI PCI host controller[    1.388815] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6[    1.388837] ohci-pci 0000:00:13.1: irq 18, io mem 0xfe02a000[    1.448524] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001[    1.448527] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1[    1.448529] usb usb6: Product: OHCI PCI host controller[    1.448530] usb usb6: Manufacturer: Linux 3.19.0-28-generic ohci_hcd[    1.448531] usb usb6: SerialNumber: 0000:00:13.1[    1.448663] hub 6-0:1.0: USB hub found[    1.448670] hub 6-0:1.0: 3 ports detected[    1.448867] ohci-pci 0000:00:14.5: OHCI PCI host controller[    1.448871] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7[    1.448893] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe028000[    1.508559] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001[    1.508561] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1[    1.508563] usb usb7: Product: OHCI PCI host controller[    1.508564] usb usb7: Manufacturer: Linux 3.19.0-28-generic ohci_hcd[    1.508565] usb usb7: SerialNumber: 0000:00:14.5[    1.508701] hub 7-0:1.0: USB hub found[    1.508708] hub 7-0:1.0: 2 ports detected[    1.508795] ohci-platform: OHCI generic platform driver[    1.508807] uhci_hcd: USB Universal Host Controller Interface driver[    1.508858] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1[    1.508859] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp[    1.509001] serio: i8042 KBD port at 0x60,0x64 irq 1[    1.509131] mousedev: PS/2 mouse device common for all mice[    1.509242] rtc_cmos 00:02: RTC can wake from S4[    1.509371] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0[    1.509402] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs[    1.509414] i2c /dev entries driver[    1.509466] device-mapper: uevent: version 1.0.3[    1.509539] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com[    1.509554] ledtrig-cpu: registered to indicate activity on CPUs[    1.509685] PCCT header not found.[    1.509686] ACPI PCC probe failed.[    1.509803] TCP: cubic registered[    1.509881] NET: Registered protocol family 10[    1.510073] NET: Registered protocol family 17[    1.510082] Key type dns_resolver registered[    1.510374] Loading compiled-in X.509 certificates[    1.511184] Loaded X.509 cert 'Magrathea: Glacier signing key: 294dc012706f48b7cddf6374e2d79fe1b0609269'[    1.511196] registered taskstats version 1[    1.512797] Key type trusted registered[    1.515366] Key type encrypted registered[    1.515373] AppArmor: AppArmor sha1 policy hashing enabled[    1.515377] ima: No TPM chip found, activating TPM-bypass![    1.515395] evm: HMAC attrs: 0x1[    1.515631]   Magic number: 3:870:321[    1.515662] tty tty46: hash matches[    1.515676] pcieport 0000:00:02.0: hash matches[    1.515731] rtc_cmos 00:02: setting system clock to 2015-10-23 08:18:20 UTC (1445588300)[    1.515794] acpi-cpufreq: overriding BIOS provided _PSD data[    1.515851] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found[    1.515852] EDD information not available.[    1.515894] PM: Hibernation image not present or could not be loaded.[    1.516278] Freeing unused kernel memory: 1408K (ffffffff81d27000 - ffffffff81e87000)[    1.516281] Write protecting the kernel read-only data: 12288k[    1.516483] Freeing unused kernel memory: 260K (ffff8800017bf000 - ffff880001800000)[    1.516632] Freeing unused kernel memory: 340K (ffff880001bab000 - ffff880001c00000)[    1.520634] usb 2-1: new high-speed USB device number 2 using ehci-pci[    1.529538] systemd-udevd[105]: starting version 204[    1.530921] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2[    1.548724] ahci 0000:00:11.0: version 3.0[    1.548926] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode[    1.548929] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [    1.549386] scsi host0: ahci[    1.549464] scsi host1: ahci[    1.549521] scsi host2: ahci[    1.549576] scsi host3: ahci[    1.549611] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22[    1.549613] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22[    1.549615] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22[    1.549618] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22[    1.572561] scsi host4: pata_atiixp[    1.580567] scsi host5: pata_atiixp[    1.580615] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14[    1.580617] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15[    1.585787] atl1c 0000:02:00.0: version 1.0.1.1-NAPI[    1.654380] usb 2-1: New USB device found, idVendor=0bda, idProduct=8176[    1.654384] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3[    1.654386] usb 2-1: Product: 802.11n WLAN Adapter[    1.654388] usb 2-1: Manufacturer: Realtek[    1.654389] usb 2-1: SerialNumber: 00e04c000001[    1.712689] usb 3-1: new low-speed USB device number 2 using ohci-pci[    1.868882] ata3: SATA link down (SStatus 0 SControl 300)[    1.868915] ata4: SATA link down (SStatus 0 SControl 300)[    1.879870] usb 3-1: New USB device found, idVendor=1bcf, idProduct=0005[    1.879873] usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0[    1.879875] usb 3-1: Product: USB Optical Mouse[    1.886641] hidraw: raw HID events driver (C) Jiri Kosina[    1.893028] usbcore: registered new interface driver usbhid[    1.893031] usbhid: USB HID core driver[    1.894411] input: USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/0003:1BCF:0005.0001/input/input3[    1.894510] hid-generic 0003:1BCF:0005.0001: input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:12.0-1/input0[    2.024939] usb 5-3: new full-speed USB device number 2 using ohci-pci[    2.040973] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)[    2.041002] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)[    2.041582] ata1.00: ATAPI: TSSTcorp CDDVDW TS-H653N, HB01, max UDMA/100[    2.042483] ata1.00: configured for UDMA/100[    2.044090] scsi 0:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-H653N  HB01 PQ: 0 ANSI: 5[    2.046952] ata2.00: ATA-8: SAMSUNG HM121HI, LZ100-08, max UDMA7[    2.046955] ata2.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA[    2.053010] ata2.00: configured for UDMA/133[    2.059175] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray[    2.059180] cdrom: Uniform CD-ROM driver Revision: 3.20[    2.059322] sr 0:0:0:0: Attached scsi CD-ROM sr0[    2.059522] sr 0:0:0:0: Attached scsi generic sg0 type 5[    2.059653] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HM121HI  0-08 PQ: 0 ANSI: 5[    2.059888] sd 1:0:0:0: Attached scsi generic sg1 type 0[    2.059922] sd 1:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)[    2.060015] sd 1:0:0:0: [sda] Write Protect is off[    2.060017] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00[    2.060045] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA[    2.098398]  sda: sda1 sda2 < sda5 >[    2.098698] sd 1:0:0:0: [sda] Attached SCSI disk[    2.157042] tsc: Refined TSC clocksource calibration: 3360.026 MHz[    2.184130] usb 5-3: not running at top speed; connect to a high speed hub[    2.196141] usb 5-3: New USB device found, idVendor=058f, idProduct=6362[    2.196145] usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3[    2.196146] usb 5-3: Product: Mass Storage Device[    2.196148] usb 5-3: Manufacturer: Generic[    2.196149] usb 5-3: SerialNumber: 058F312D81B[    2.200690] usb-storage 5-3:1.0: USB Mass Storage device detected[    2.200768] scsi host6: usb-storage 5-3:1.0[    2.200832] usbcore: registered new interface driver usb-storage[    2.201991] usbcore: registered new interface driver uas[    2.532837] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)[    3.157898] Switched to clocksource tsc[    3.204950] scsi 6:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0[    3.210955] scsi 6:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0[    3.216958] scsi 6:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0[    3.222964] scsi 6:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0[    3.223193] sd 6:0:0:0: Attached scsi generic sg2 type 0[    3.223313] sd 6:0:0:1: Attached scsi generic sg3 type 0[    3.223426] sd 6:0:0:2: Attached scsi generic sg4 type 0[    3.223537] sd 6:0:0:3: Attached scsi generic sg5 type 0[    3.313025] sd 6:0:0:0: [sdb] Attached SCSI removable disk[    3.323033] sd 6:0:0:1: [sdc] Attached SCSI removable disk[    3.333040] sd 6:0:0:2: [sdd] Attached SCSI removable disk[    3.343049] sd 6:0:0:3: [sde] Attached SCSI removable disk[    4.570970] floppy0: no floppy controllers found[    5.618908] random: init urandom read with 126 bits of entropy available[    5.679137] random: nonblocking pool is initialized[   17.173311] Adding 4192928k swap on /dev/sda5.  Priority:-1 extents:1 across:4192928k FS[   17.277513] systemd-udevd[291]: starting version 204[   17.472648] lp: driver loaded but no devices found[   17.477961] ppdev: user-space parallel port driver[   17.699368] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4[   17.701357] wmi: Mapper loaded[   17.718521] [drm] Initialized drm 1.1.0 20060810[   17.750456] ACPI Warning: SystemIO range 0x0000000000000b00-0x0000000000000b07 conflicts with OpRegion 0x0000000000000b00-0x0000000000000b0f (\SOR1) (20141107/utaddress-258)[   17.750463] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver[   17.764108] MCE: In-kernel MCE decoding enabled.[   17.765699] EDAC MC: Ver: 3.0.0[   17.772788] AMD64 EDAC driver v3.4.0[   17.772815] EDAC amd64: DRAM ECC disabled.[   17.772819] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.[   17.772819]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.[   17.772819]  (Note that use of the override may cause unknown side effects.)[   17.805017] kvm: disabled by bios[   17.846104] kvm: disabled by bios[   18.032951] audit: type=1400 audit(1445588317.000:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=351 comm="apparmor_parser"[   18.032957] audit: type=1400 audit(1445588317.000:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=351 comm="apparmor_parser"[   18.032960] audit: type=1400 audit(1445588317.000:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=351 comm="apparmor_parser"[   18.033363] audit: type=1400 audit(1445588317.000:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=351 comm="apparmor_parser"[   18.033367] audit: type=1400 audit(1445588317.000:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=351 comm="apparmor_parser"[   18.033495] audit: type=1400 audit(1445588317.000:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=333 comm="apparmor_parser"[   18.033503] audit: type=1400 audit(1445588317.000:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=333 comm="apparmor_parser"[   18.033507] audit: type=1400 audit(1445588317.000:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=333 comm="apparmor_parser"[   18.033599] audit: type=1400 audit(1445588317.004:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=351 comm="apparmor_parser"[   18.033893] audit: type=1400 audit(1445588317.004:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=333 comm="apparmor_parser"[   18.229358] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line[   18.229362] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)[   18.229373] sound hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)[   18.229374] sound hdaudioC0D0:    mono: mono_out=0x0[   18.229375] sound hdaudioC0D0:    inputs:[   18.229377] sound hdaudioC0D0:      Rear Mic=0x18[   18.229378] sound hdaudioC0D0:      Front Mic=0x19[   18.229380] sound hdaudioC0D0:      Line=0x1a[   18.229381] sound hdaudioC0D0:      CD=0x1c[   18.245396] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input4[   18.245480] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5[   18.245557] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input6[   18.245634] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input7[   18.440229] nvidia: module license 'NVIDIA' taints kernel.[   18.440232] Disabling lock debugging due to kernel taint[   18.445828] nvidia: module verification failed: signature and/or  required key missing - tainting kernel[   18.450520] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem[   18.450971] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0[   18.450977] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  340.76  Thu Jan 22 12:11:08 PST 2015[   19.178754] cfg80211: Calling CRDA to update world regulatory domain[   19.195275] rtl8192cu: Chip version 0x10[   19.274200] rtl8192cu: MAC address: 64:70:02:2b:1c:d3[   19.274204] rtl8192cu: Board Type 0[   19.274455] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1[   19.274488] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin[   19.277932] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'[   19.278160] usbcore: registered new interface driver rtl8192cu[   19.501274] cfg80211: World regulatory domain updated:[   19.501278] cfg80211:  DFS Master region: unset[   19.501279] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)[   19.501282] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)[   19.501283] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)[   19.501285] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)[   19.501286] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)[   19.501287] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)[   20.622335] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro[   20.751728] floppy0: no floppy controllers found[   20.970403] init: failsafe main process (644) killed by TERM signal[   22.557969] init: cups main process (789) killed by HUP signal[   22.557977] init: cups main process ended, respawning[   22.637027] Bluetooth: Core ver 2.20[   22.637046] NET: Registered protocol family 31[   22.637047] Bluetooth: HCI device and connection manager initialized[   22.637052] Bluetooth: HCI socket layer initialized[   22.637054] Bluetooth: L2CAP socket layer initialized[   22.637059] Bluetooth: SCO socket layer initialized[   22.640044] Bluetooth: RFCOMM TTY layer initialized[   22.640051] Bluetooth: RFCOMM socket layer initialized[   22.640056] Bluetooth: RFCOMM ver 1.11[   22.682346] Bluetooth: BNEP (Ethernet Emulation) ver 1.3[   22.682349] Bluetooth: BNEP filters: protocol multicast[   22.682353] Bluetooth: BNEP socket layer initialized[   23.931843] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready[   23.940425] rtl8192cu: MAC auto ON okay![   23.973330] rtl8192cu: Tx queue select: 0x05[   24.394513] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready[   25.011720] init: samba-ad-dc main process (880) terminated with status 1[   25.068807] audit_printk_skb: 165 callbacks suppressed[   25.068810] audit: type=1400 audit(1445588324.032:67): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1010 comm="apparmor_parser"[   29.829795] init: plymouth-upstart-bridge main process ended, respawning[   40.101309] atl1c 0000:02:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>[   40.101323] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready[   52.051340] audit: type=1400 audit(1445588350.992:68): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1644 comm="apparmor_parser"[   52.051350] audit: type=1400 audit(1445588350.992:69): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1644 comm="apparmor_parser"[   52.051745] audit: type=1400 audit(1445588350.992:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1644 comm="apparmor_parser"[12276.321297] usb 2-1: USB disconnect, device number 2[12276.326687] rtl_usb: reg 0x102, usbctrl_vendorreq TimeOut! status:0xffffffed value=0x90e1317[12276.326693] rtl_usb: reg 0x422, usbctrl_vendorreq TimeOut! status:0xffffffed value=0xf0002a0e[12276.326696] rtl_usb: reg 0x542, usbctrl_vendorreq TimeOut! status:0xffffffed value=0x5c30b9a[12276.326711] rtl_usb: reg 0x102, usbctrl_vendorreq TimeOut! status:0xffffffed value=0x2305b0[12278.300189] usb 2-1: new high-speed USB device number 4 using ehci-pci[12278.434069] usb 2-1: New USB device found, idVendor=0bda, idProduct=8176[12278.434080] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3[12278.434087] usb 2-1: Product: 802.11n WLAN Adapter[12278.434092] usb 2-1: Manufacturer: Realtek[12278.434096] usb 2-1: SerialNumber: 00e04c000001[12278.435664] rtl8192cu: Chip version 0x10[12278.515354] rtl8192cu: MAC address: 64:70:02:2b:1c:d3[12278.515360] rtl8192cu: Board Type 0[12278.515601] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1[12278.515637] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin[12278.515812] ieee80211 phy1: Selected rate control algorithm 'rtl_rc'[12280.264073] rtl8192cu: MAC auto ON okay![12280.301844] rtl8192cu: Tx queue select: 0x05[12280.716816] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready[12454.049319] systemd-hostnamed[7422]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname![12886.562460] usb 2-1: USB disconnect, device number 4[13011.498303] usb 2-4: new high-speed USB device number 5 using ehci-pci[13011.632109] usb 2-4: New USB device found, idVendor=0bda, idProduct=8176[13011.632115] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3[13011.632118] usb 2-4: Product: 802.11n WLAN Adapter[13011.632120] usb 2-4: Manufacturer: Realtek[13011.632122] usb 2-4: SerialNumber: 00e04c000001[13011.632605] rtl8192cu: Chip version 0x10[13011.711151] rtl8192cu: MAC address: 64:70:02:2b:1c:d3[13011.711156] rtl8192cu: Board Type 0[13011.711398] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1[13011.711427] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin[13011.711577] ieee80211 phy2: Selected rate control algorithm 'rtl_rc'[13011.859826] usb 2-4: USB disconnect, device number 5[13012.154863] usb 2-4: new high-speed USB device number 6 using ehci-pci[13012.288693] usb 2-4: New USB device found, idVendor=0bda, idProduct=8176[13012.288706] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3[13012.288712] usb 2-4: Product: 802.11n WLAN Adapter[13012.288717] usb 2-4: Manufacturer: Realtek[13012.288721] usb 2-4: SerialNumber: 00e04c000001[13012.290312] rtl8192cu: Chip version 0x10[13012.371235] rtl8192cu: MAC address: 64:70:02:2b:1c:d3[13012.371242] rtl8192cu: Board Type 0[13012.371471] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1[13012.371520] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin[13012.371782] ieee80211 phy3: Selected rate control algorithm 'rtl_rc'[13012.596491] rtl8192cu: MAC auto ON okay![13012.637413] rtl8192cu: Tx queue select: 0x05[13013.051526] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready[13013.063419] rtl8192cu: MAC auto ON okay![13013.097445] rtl8192cu: Tx queue select: 0x05[13013.511986] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready

dmesg | tail

Kod Seç Genişlet

[13012.371242] rtl8192cu: Board Type 0
[13012.371471] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
[13012.371520] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
[13012.371782] ieee80211 phy3: Selected rate control algorithm 'rtl_rc'
[13012.596491] rtl8192cu: MAC auto ON okay!
[13012.637413] rtl8192cu: Tx queue select: 0x05
[13013.051526] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[13013.063419] rtl8192cu: MAC auto ON okay!
[13013.097445] rtl8192cu: Tx queue select: 0x05
[13013.511986] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready


[heartsmagic]

Sorun olmadan önce güncelleme aldın mı, esas sorum oydu aslında. 

[deniz0715]

ya benim sorunum 1-2 haftadır vardı sonra wifi ye ihtiyacım olduğu için buraya yazdım sorun varken güncelleme almadım daha sonra aldım fakat bir değişim yok

wifi den ağımı seçip şifreyi giriyorum bağlana tıklıyorum hiç bişey olmuyor

[heartsmagic]

Şunu bir deneyelim:

Kod Seç Genişlet

sudo apt-get install git build-essential
git clone https://github.com/lwfinger/rtl8192cu.git
cd rtl8192cu
make
sudo make install

Lütfen tüm çıktıları kod etiketi ile buraya aktar. Sonra sistemi yeniden başlatı bağlanmayı denersin.

[deniz0715]

evet hortatıyorum umarım kusuruma bakmazsınız yaklaşık 3 aydır kişisel bilgisiyarımı kullanmıyordum forumada giremedim şimdi tekrardan girdim ethernet kablom yok malesef ve almamın imkanıda yok şuanda 


lxde kullanıyorum wifi bağlanmıyor xfce gibi bi seçenekte var o seçenektede wifi ye tıkladığımda birşey açılmıyor lxde de tıklıyorum wifiler geliyor şifreyi yazıyorum girmiyor 3 tane wifi cihazı denedim aynı tahminimce kullandığım lxde den kaynaklı internet olmadan nasıl ubuntuya dönerim veya nasıl çözerim bunu lütfen acil yardım edin çok acil işim
 profil seçim yerinde ubuntuda var fakat onu seçtiğimde 2 dk bekletip tekrar kullanıcı seçim ekranına atıyor lütfen yardım edin .(

[plazma]

https://forum.ubuntu-tr.net/index.php?topic=28764.0 çıktılarını kod etiketi içerisinde tekrardan aktarmanız gerekiyor tamamını.

[deniz0715]

bu konudan sonra nerdeyse hiç dokunmadım internete bağlanamadığım için atamam sorun orda işte flashla vs format atamazmıyım dosyaları kaybetmeden

[plazma]

Metin editörü ile kaydedin bir txt dosyasına sonra cevap yazdığınız bilgisayardan çıktıları buraya aktarın, eğer ağ sornu çözmek istiyorsanız. Lxde yerine Xfce masaüstü kuracaksanız internet şart o bilgisayara, olmadan herhangi bir ilerleme yapamayız.

[deniz0715]

sorunda internete bağlanamam işte  ben çözümü formatta buldum tekrardan yardımlarınız için teşekkürler