Linux Takılma Problemi.

[mehmet015]

Merhaba Arkadaşlar;

Ubuntu-14.10 -14.04  Linux Mint  17.1 Kullandım Şuanda Mint kullanıyorum fakat pc 5-30 dk'ları arasında donup kalıyor (Numlock Çalışmıyor -- Arkaplanda Müzik varsa son sn tekrar edip duruyor vb)
Tüm güncellemeleri attım ekran kartının kapalı sürücülerini yüklemediim. Yüklü gelen sürücüler tanımlı. (Bazı sitelerde Nvidia'nın kapalı sürücüleri Çekirdek ile çakıştığını Söylemilşti.)

#Not : Daha önce hem mint hemde ubuntuyu sorunsuz bir şekilde kullanmıştım.(PC toplama ve herhangi bir parçası değişmedi.)
Not2: Ekran kartı Nvidia Gt 220 (ek sürücüler kısmında 215 yazıyor sanırım gpu ile alakılı ) Ram 2 gb Ddr3 500Gb Hdd (Biraz Fazla format yemiş). İşlemci Amd Athlon AMD Athlon II X2 225  3.1 Ghz.

Herhangi bir çıktı gerekirse mesaj ile belirtin.//

[  lshw -C video  ] Çıktısı şu şekilde.

Kod Seç Genişlet

Poop mehmet # lshw -C video
  *-display               
       açıklama: VGA compatible controller
       ürün: GT215 [GeForce GT 220]
       üretici: NVIDIA Corporation
       physical id: 0
       bus info: pci@0000:01:00.0
       sürüm: a2
       genişlik: 64 bits
       saat: 33MHz
       kapasiteler: pm msi pciexpress vga_controller bus_master cap_list rom
       yapılandırma: driver=nouveau latency=0
       kaynaklar: irq:44 bellek:fd000000-fdffffff bellek:d0000000-dfffffff bellek:ce000000-cfffffff ioport:d800(boyut=128) bellek:fea80000-feafffff
Poop mehmet #


[  glxinfo | grep render ]  Çıktısı

Kod Seç Genişlet

Poop mehmet # glxinfo | grep render
direct rendering: Yes
    GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer,
OpenGL renderer string: Gallium 0.4 on NVA3
    GL_MESA_texture_signed_rgba, GL_NV_conditional_render, GL_NV_depth_clamp,
    GL_NV_blend_square, GL_NV_conditional_render, GL_NV_depth_clamp,


[if]

@mehmet015, ekran kartı için kapalı kaynak sürücüleri yükleyince bu sorun mevcut mu?

Kod Seç Genişlet

dmesg çıktısına bakalım.

[mehmet015]

@mehmet015, ekran kartı için kapalı kaynak sürücüleri yükleyince bu sorun mevcut mu?

Kod Seç Genişlet

dmesg çıktısına bakalım.

Kod Seç Genişlet

[    0.292395] system 00:0a: [io  0x0e80-0x0e8f] has been reserved
[    0.292397] system 00:0a: [io  0x0f40-0x0f4f] has been reserved
[    0.292399] system 00:0a: [io  0x0a30-0x0a3f] has been reserved
[    0.292400] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.292680] pnp 00:0b: [dma 0 disabled]
[    0.292736] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.292777] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[    0.292779] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.306675] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.306679] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.306681] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.306683] system 00:0d: [mem 0x00100000-0x7fffffff] could not be reserved
[    0.306685] system 00:0d: [mem 0xfec00000-0xffffffff] could not be reserved
[    0.306688] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.306767] pnp: PnP ACPI: found 14 devices
[    0.306768] ACPI: bus type PNP unregistered
[    0.312973] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.312976] pci 0000:00:02.0:   bridge window [io  0xd000-0xdfff]
[    0.312979] pci 0000:00:02.0:   bridge window [mem 0xfd000000-0xfeafffff]
[    0.312981] pci 0000:00:02.0:   bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[    0.312985] pci 0000:00:07.0: PCI bridge to [bus 02]
[    0.312986] pci 0000:00:07.0:   bridge window [io  0xe000-0xefff]
[    0.312989] pci 0000:00:07.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.312991] pci 0000:00:07.0:   bridge window [mem 0xfbf00000-0xfbffffff 64bit pref]
[    0.312994] pci 0000:00:14.4: PCI bridge to [bus 03]
[    0.313006] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.313007] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.313009] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.313010] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.313012] pci_bus 0000:00: resource 8 [mem 0x80000000-0xdfffffff]
[    0.313013] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[    0.313015] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.313017] pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfeafffff]
[    0.313018] pci_bus 0000:01: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
[    0.313020] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.313021] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.313023] pci_bus 0000:02: resource 2 [mem 0xfbf00000-0xfbffffff 64bit pref]
[    0.313025] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
[    0.313026] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
[    0.313028] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[    0.313029] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
[    0.313031] pci_bus 0000:03: resource 8 [mem 0x80000000-0xdfffffff]
[    0.313032] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff]
[    0.313061] NET: Registered protocol family 2
[    0.313228] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.313282] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.313356] TCP: Hash tables configured (established 16384 bind 16384)
[    0.313400] TCP: reno registered
[    0.313405] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.313418] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.313485] NET: Registered protocol family 1
[    0.738195] pci 0000:01:00.0: Boot video device
[    0.738209] PCI: CLS 64 bytes, default 64
[    0.738278] Trying to unpack rootfs image as initramfs...
[    1.138565] Freeing initrd memory: 28288K (ffff8800348b0000 - ffff880036450000)
[    1.138904] LVT offset 1 assigned for vector 0x400
[    1.138909] IBS: LVT offset 1 assigned
[    1.138934] perf: AMD IBS detected (0x0000001f)
[    1.138975] microcode: CPU0: patch_level=0x010000b6
[    1.138988] microcode: CPU1: patch_level=0x010000b6
[    1.139061] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.139062] Scanning for low memory corruption every 60 seconds
[    1.139288] Initialise system trusted keyring
[    1.139329] audit: initializing netlink socket (disabled)
[    1.139342] type=2000 audit(1430643274.028:1): initialized
[    1.162697] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.163742] zbud: loaded
[    1.163947] VFS: Disk quotas dquot_6.5.2
[    1.163993] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.164451] fuse init (API version 7.22)
[    1.164586] msgmni has been set to 3996
[    1.164642] Key type big_key registered
[    1.165014] Key type asymmetric registered
[    1.165019] Asymmetric key parser 'x509' registered
[    1.165084] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.165129] io scheduler noop registered
[    1.165130] io scheduler deadline registered (default)
[    1.165151] io scheduler cfq registered
[    1.165340] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[    1.165448] pcieport 0000:00:07.0: irq 41 for MSI/MSI-X
[    1.165488] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.165499] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.165528] vesafb: mode is 640x480x32, linelength=2560, pages=0
[    1.165529] vesafb: scrolling: redraw
[    1.165530] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.165579] vesafb: framebuffer at 0xcf000000, mapped to 0xffffc90010400000, using 1216k, total 1216k
[    1.169584] Console: switching to colour frame buffer device 80x30
[    1.173491] fb0: VESA VGA frame buffer device
[    1.173513] ipmi message handler version 39.2
[    1.173572] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    1.173576] ACPI: Power Button [PWRB]
[    1.173600] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.173602] ACPI: Power Button [PWRF]
[    1.173897] thermal LNXTHERM:00: registered as thermal_zone0
[    1.173898] ACPI: Thermal Zone [THRM] (46 C)
[    1.173920] GHES: HEST is not enabled!
[    1.174008] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.194476] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.195742] Linux agpgart interface v0.103
[    1.196909] brd: module loaded
[    1.197728] loop: module loaded
[    1.198030] libphy: Fixed MDIO Bus: probed
[    1.198094] tun: Universal TUN/TAP device driver, 1.6
[    1.198095] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.198177] PPP generic driver version 2.4.2
[    1.198212] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.198215] ehci-pci: EHCI PCI platform driver
[    1.198353] ehci-pci 0000:00:12.2: EHCI Host Controller
[    1.198359] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.198363] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.198374] ehci-pci 0000:00:12.2: debug port 1
[    1.198416] ehci-pci 0000:00:12.2: irq 17, io mem 0xfcfff000
[    1.209634] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.209702] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.209704] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.209706] usb usb1: Product: EHCI Host Controller
[    1.209707] usb usb1: Manufacturer: Linux 3.13.0-37-generic ehci_hcd
[    1.209708] usb usb1: SerialNumber: 0000:00:12.2
[    1.209839] hub 1-0:1.0: USB hub found
[    1.209845] hub 1-0:1.0: 6 ports detected
[    1.210062] ehci-pci 0000:00:13.2: EHCI Host Controller
[    1.210067] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    1.210071] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.210082] ehci-pci 0000:00:13.2: debug port 1
[    1.210125] ehci-pci 0000:00:13.2: irq 19, io mem 0xfcffa800
[    1.221622] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.221672] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.221674] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.221675] usb usb2: Product: EHCI Host Controller
[    1.221677] usb usb2: Manufacturer: Linux 3.13.0-37-generic ehci_hcd
[    1.221678] usb usb2: SerialNumber: 0000:00:13.2
[    1.221813] hub 2-0:1.0: USB hub found
[    1.221819] hub 2-0:1.0: 6 ports detected
[    1.221930] ehci-platform: EHCI generic platform driver
[    1.221940] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.221941] ohci-pci: OHCI PCI platform driver
[    1.222065] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    1.222070] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[    1.222092] ohci-pci 0000:00:12.0: irq 16, io mem 0xfcffe000
[    1.281585] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.281588] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.281590] usb usb3: Product: OHCI PCI host controller
[    1.281591] usb usb3: Manufacturer: Linux 3.13.0-37-generic ohci_hcd
[    1.281592] usb usb3: SerialNumber: 0000:00:12.0
[    1.281730] hub 3-0:1.0: USB hub found
[    1.281737] hub 3-0:1.0: 3 ports detected
[    1.281915] ohci-pci 0000:00:12.1: OHCI PCI host controller
[    1.281919] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
[    1.281934] ohci-pci 0000:00:12.1: irq 16, io mem 0xfcffd000
[    1.341525] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.341529] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.341530] usb usb4: Product: OHCI PCI host controller
[    1.341532] usb usb4: Manufacturer: Linux 3.13.0-37-generic ohci_hcd
[    1.341533] usb usb4: SerialNumber: 0000:00:12.1
[    1.341668] hub 4-0:1.0: USB hub found
[    1.341676] hub 4-0:1.0: 3 ports detected
[    1.341856] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    1.341860] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[    1.341885] ohci-pci 0000:00:13.0: irq 18, io mem 0xfcffc000
[    1.401470] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.401473] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.401475] usb usb5: Product: OHCI PCI host controller
[    1.401476] usb usb5: Manufacturer: Linux 3.13.0-37-generic ohci_hcd
[    1.401477] usb usb5: SerialNumber: 0000:00:13.0
[    1.401614] hub 5-0:1.0: USB hub found
[    1.401623] hub 5-0:1.0: 3 ports detected
[    1.401803] ohci-pci 0000:00:13.1: OHCI PCI host controller
[    1.401807] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
[    1.401822] ohci-pci 0000:00:13.1: irq 18, io mem 0xfcffb000
[    1.461427] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.461431] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.461432] usb usb6: Product: OHCI PCI host controller
[    1.461433] usb usb6: Manufacturer: Linux 3.13.0-37-generic ohci_hcd
[    1.461435] usb usb6: SerialNumber: 0000:00:13.1
[    1.461575] hub 6-0:1.0: USB hub found
[    1.461582] hub 6-0:1.0: 3 ports detected
[    1.461766] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    1.461770] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
[    1.461785] ohci-pci 0000:00:14.5: irq 18, io mem 0xfcff9000
[    1.521370] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    1.521374] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.521375] usb usb7: Product: OHCI PCI host controller
[    1.521377] usb usb7: Manufacturer: Linux 3.13.0-37-generic ohci_hcd
[    1.521378] usb usb7: SerialNumber: 0000:00:14.5
[    1.521525] hub 7-0:1.0: USB hub found
[    1.521535] hub 7-0:1.0: 2 ports detected
[    1.521601] ohci-platform: OHCI generic platform driver
[    1.521611] uhci_hcd: USB Universal Host Controller Interface driver
[    1.521662] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.522032] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.522037] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.522134] mousedev: PS/2 mouse device common for all mice
[    1.522230] rtc_cmos 00:02: RTC can wake from S4
[    1.522365] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.522389] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.522446] device-mapper: uevent: version 1.0.3
[    1.522520] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    1.522526] ledtrig-cpu: registered to indicate activity on CPUs
[    1.522608] TCP: cubic registered
[    1.522672] NET: Registered protocol family 10
[    1.522818] NET: Registered protocol family 17
[    1.522826] Key type dns_resolver registered
[    1.523052] Loading compiled-in X.509 certificates
[    1.523941] Loaded X.509 cert 'Magrathea: Glacier signing key: 2cb1133b35f95a9e24deabeeb12ba449bcbabbc9'
[    1.523960] registered taskstats version 1
[    1.525774] Key type trusted registered
[    1.527414] Key type encrypted registered
[    1.528757] AppArmor: AppArmor sha1 policy hashing enabled
[    1.528760] IMA: No TPM chip found, activating TPM-bypass!
[    1.528975] regulator-dummy: disabling
[    1.529078]   Magic number: 15:953:926
[    1.529186] rtc_cmos 00:02: setting system clock to 2015-05-03 08:54:35 UTC (1430643275)
[    1.529335] acpi-cpufreq: overriding BIOS provided _PSD data
[    1.529394] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.529395] EDD information not available.
[    1.529457] PM: Hibernation image not present or could not be loaded.
[    1.530739] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
[    1.530742] Write protecting the kernel read-only data: 12288k
[    1.532802] Freeing unused kernel memory: 804K (ffff880001737000 - ffff880001800000)
[    1.534522] Freeing unused kernel memory: 692K (ffff880001b53000 - ffff880001c00000)
[    1.552461] systemd-udevd[108]: starting version 204
[    1.567439] ahci 0000:00:11.0: version 3.0
[    1.567597] ahci 0000:00:11.0: irq 42 for MSI/MSI-X
[    1.567683] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    1.567686] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[    1.573524] wmi: Mapper loaded
[    1.576307] [drm] Initialized drm 1.1.0 20060810
[    1.579148] scsi0 : ahci
[    1.580764] Floppy drive(s): fd0 is 1.44M
[    1.581428] scsi1 : ahci
[    1.586072] scsi2 : ahci
[    1.591478] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.591495] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.591703] r8169 0000:02:00.0: irq 43 for MSI/MSI-X
[    1.591848] r8169 0000:02:00.0 eth0: RTL8102e at 0xffffc9000033e000, 00:30:67:9f:11:7e, XID 04c00000 IRQ 43
[    1.596090] scsi3 : ahci
[    1.596159] ata1: SATA max UDMA/133 abar m1024@0xfcfff800 port 0xfcfff900 irq 42
[    1.596162] ata2: SATA max UDMA/133 abar m1024@0xfcfff800 port 0xfcfff980 irq 42
[    1.596165] ata3: SATA max UDMA/133 abar m1024@0xfcfff800 port 0xfcfffa00 irq 42
[    1.596167] ata4: SATA max UDMA/133 abar m1024@0xfcfff800 port 0xfcfffa80 irq 42
[    1.598722] scsi4 : pata_atiixp
[    1.601403] scsi5 : pata_atiixp
[    1.601468] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[    1.601469] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[    1.602254] checking generic (cf000000 130000) vs hw (d0000000 10000000)
[    1.602255] checking generic (cf000000 130000) vs hw (ce000000 2000000)
[    1.602257] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
[    1.602272] Console: switching to colour dummy device 80x25
[    1.603125] FDC 0 is a post-1991 82077
[    1.603533] nouveau  [  DEVICE][0000:01:00.0] BOOT0  : 0x0a3280a2
[    1.603537] nouveau  [  DEVICE][0000:01:00.0] Chipset: GT215 (NVA3)
[    1.603539] nouveau  [  DEVICE][0000:01:00.0] Family : NV50
[    1.604689] nouveau  [   VBIOS][0000:01:00.0] checking PRAMIN for image...
[    1.681153] nouveau  [   VBIOS][0000:01:00.0] ... appears to be valid
[    1.681164] nouveau  [   VBIOS][0000:01:00.0] using image from PRAMIN
[    1.681271] nouveau  [   VBIOS][0000:01:00.0] BIT signature found
[    1.681274] nouveau  [   VBIOS][0000:01:00.0] version 70.15.4a.00.00
[    1.701375] nouveau 0000:01:00.0: irq 44 for MSI/MSI-X
[    1.701383] nouveau  [     PMC][0000:01:00.0] MSI interrupts enabled
[    1.701411] nouveau W[     PFB][0000:01:00.0][0x00000000][ffff880035b63c00] reclocking of this ram type unsupported
[    1.701413] nouveau  [     PFB][0000:01:00.0] RAM type: DDR2
[    1.701415] nouveau  [     PFB][0000:01:00.0] RAM size: 1024 MiB
[    1.701416] nouveau  [     PFB][0000:01:00.0]    ZCOMP: 2048 tags
[    1.703319] nouveau  [    VOLT][0000:01:00.0] GPU voltage: 890000uv
[    1.982905] ata4: SATA link down (SStatus 0 SControl 300)
[    1.982950] ata3: SATA link down (SStatus 0 SControl 300)
[    2.084846] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.086062] ata1.00: ATA-8: ST3500413AS, JC45, max UDMA/133
[    2.086066] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    2.087469] ata1.00: configured for UDMA/133
[    2.087586] scsi 0:0:0:0: Direct-Access     ATA      ST3500413AS      JC45 PQ: 0 ANSI: 5
[    2.087818] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.087859] sd 0:0:0:0: [sda] Write Protect is off
[    2.087861] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.087877] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.088219] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.092841] usb 4-1: new low-speed USB device number 2 using ohci-pci
[    2.137767]  sda: sda1 sda2 sda3 < sda5 sda6 >
[    2.138097] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.144770] tsc: Refined TSC clocksource calibration: 3100.174 MHz
[    2.156773] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.159791] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN03, max UDMA/100
[    2.163599] ata2.00: configured for UDMA/100
[    2.172200] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH22NS50  TN03 PQ: 0 ANSI: 5
[    2.180621] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.180626] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.180965] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.181008] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.257644] usb 4-1: New USB device found, idVendor=15d9, idProduct=0a4d
[    2.257648] usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.257650] usb 4-1: Product:  USB OPTICAL MOUSE
[    2.262590] hidraw: raw HID events driver (C) Jiri Kosina
[    2.269027] usbcore: registered new interface driver usbhid
[    2.269030] usbhid: USB HID core driver
[    2.270706] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/input/input5
[    2.271177] hid-generic 0003:15D9:0A4D.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:12.1-1/input0
[    2.392556] usb 3-1: new low-speed USB device number 2 using ohci-pci
[    2.561360] usb 3-1: New USB device found, idVendor=1c4f, idProduct=0002
[    2.561364] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.561366] usb 3-1: Product: USB Keyboard
[    2.561367] usb 3-1: Manufacturer: SIGMACHIP
[    2.568635] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input6
[    2.568703] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:12.0-1/input0
[    2.573630] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.1/input/input7
[    2.573697] hid-generic 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:12.0-1/input1
[    2.991974] nouveau  [  PTHERM][0000:01:00.0] FAN control: PWM
[    2.991988] nouveau  [  PTHERM][0000:01:00.0] fan management: automatic
[    2.992012] nouveau  [  PTHERM][0000:01:00.0] internal sensor: yes
[    2.992040] nouveau  [     CLK][0000:01:00.0] 03: core 135 MHz shader 270 MHz memory 135 MHz
[    2.992043] nouveau  [     CLK][0000:01:00.0] 07: core 405 MHz shader 810 MHz memory 324 MHz
[    2.992046] nouveau  [     CLK][0000:01:00.0] 0f: core 550 MHz shader 1100 MHz memory 400 MHz
[    2.992066] nouveau  [     CLK][0000:01:00.0] --: core 405 MHz shader 810 MHz memory 324 MHz
[    2.992230] [TTM] Zone  kernel: Available graphics memory: 1024600 kiB
[    2.992231] [TTM] Initializing pool allocator
[    2.992234] [TTM] Initializing DMA pool allocator
[    2.992246] nouveau  [     DRM] VRAM: 1024 MiB
[    2.992247] nouveau  [     DRM] GART: 1048576 MiB
[    2.992251] nouveau  [     DRM] TMDS table version 2.0
[    2.992252] nouveau  [     DRM] DCB version 4.0
[    2.992254] nouveau  [     DRM] DCB outp 00: 02000300 00000000
[    2.992256] nouveau  [     DRM] DCB outp 01: 01000302 00020030
[    2.992257] nouveau  [     DRM] DCB outp 02: 01011310 00000000
[    2.992258] nouveau  [     DRM] DCB conn 00: 00001030
[    2.992260] nouveau  [     DRM] DCB conn 01: 00000100
[    2.999157] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.999158] [drm] No driver support for vblank timestamp query.
[    3.006785] nouveau  [     DRM] MM: using COPY for buffer copies
[    3.048558] nouveau  [     DRM] allocated 1600x900 fb: 0x70000, bo ffff880035b72400
[    3.048681] fbcon: nouveaufb (fb0) is primary device
[    3.119442] Console: switching to colour frame buffer device 200x56
[    3.120488] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[    3.120490] nouveau 0000:01:00.0: registered panic notifier
[    3.120494] [drm] Initialized nouveau 1.1.2 20120801 for 0000:01:00.0 on minor 0
[    3.143915] Switched to clocksource tsc
[    3.376078] EXT4-fs (sda5): INFO: recovery required on readonly filesystem
[    3.376082] EXT4-fs (sda5): write access will be enabled during recovery
[    3.493422] random: nonblocking pool is initialized
[    4.756348] EXT4-fs (sda5): orphan cleanup on readonly fs
[    4.777481] EXT4-fs (sda5): 18 orphan inodes deleted
[    4.777485] EXT4-fs (sda5): recovery complete
[    4.927410] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   12.943425] Adding 2094076k swap on /dev/sda6.  Priority:-1 extents:1 across:2094076k FS
[   12.995315] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   13.082761] systemd-udevd[364]: starting version 204
[   13.191439] lp: driver loaded but no devices found
[   13.212615] ppdev: user-space parallel port driver
[   13.215344] parport_pc 00:06: reported by Plug and Play ACPI
[   13.215401] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   13.226304] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   13.310579] lp0: using parport0 (interrupt-driven).
[   13.341362] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20131115/utaddress-251)
[   13.341370] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.342552] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[   13.342635] sp5100_tco: PCI Revision ID: 0x3c
[   13.342653] sp5100_tco: failed to find MMIO address, giving up.
[   13.369250] MCE: In-kernel MCE decoding enabled.
[   13.371154] EDAC MC: Ver: 3.0.0
[   13.373855] AMD64 EDAC driver v3.4.0
[   13.373918] EDAC amd64: DRAM ECC disabled.
[   13.373923] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[   13.373923]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[   13.373923]  (Note that use of the override may cause unknown side effects.)
[   13.402952] device-mapper: multipath: version 1.6.0 loaded
[   13.409273] hda-intel 0000:00:14.2: Using LPIB position fix
[   13.421678] hda-intel 0000:00:14.2: Enable sync_write for stable communication
[   13.428316] kvm: Nested Virtualization enabled
[   13.428322] kvm: Nested Paging enabled
[   13.438384] SKU: Nid=0x1d sku_cfg=0x4004c601
[   13.438389] SKU: port_connectivity=0x1
[   13.438390] SKU: enable_pcbeep=0x0
[   13.438391] SKU: check_sum=0x00000004
[   13.438392] SKU: customization=0x000000c6
[   13.438393] SKU: external_amp=0x0
[   13.438394] SKU: platform_type=0x0
[   13.438394] SKU: swap=0x0
[   13.438395] SKU: override=0x1
[   13.438655] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   13.438656]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   13.438657]    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   13.438658]    mono: mono_out=0x0
[   13.438659]    dig-out=0x1e/0x0
[   13.438660]    inputs:
[   13.438662]      Front Mic=0x19
[   13.438663]      Rear Mic=0x18
[   13.438673]      Line=0x1a
[   13.438674] realtek: No valid SSID, checking pincfg 0x4004c601 for NID 0x1d
[   13.438675] realtek: Enabling init ASM_ID=0xc601 CODEC_ID=10ec0662
[   13.452832] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[   13.453312] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[   13.453399] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[   13.453672] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[   13.453738] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[   13.454042] hda_intel: Disabling MSI
[   13.454049] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[   13.454076] hda-intel 0000:01:00.1: Disabling 64bit DMA
[   13.457423] hda-intel 0000:01:00.1: Enable delay in RIRB handling
[   13.952240] init: failsafe main process (585) killed by TERM signal
[   14.277681] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
[   14.277759] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
[   14.277798] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
[   14.277838] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
[   14.297063] Bluetooth: Core ver 2.17
[   14.297089] NET: Registered protocol family 31
[   14.297090] Bluetooth: HCI device and connection manager initialized
[   14.298339] Bluetooth: HCI socket layer initialized
[   14.298342] Bluetooth: L2CAP socket layer initialized
[   14.298347] Bluetooth: SCO socket layer initialized
[   14.301954] Bluetooth: RFCOMM TTY layer initialized
[   14.301966] Bluetooth: RFCOMM socket layer initialized
[   14.301971] Bluetooth: RFCOMM ver 1.11
[   14.323629] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   14.323633] Bluetooth: BNEP filters: protocol multicast
[   14.323643] Bluetooth: BNEP socket layer initialized
[   14.339612] init: cups main process (695) killed by HUP signal
[   14.339622] init: cups main process ended, respawning
[   15.205893] r8169 0000:02:00.0 eth0: link down
[   15.205927] r8169 0000:02:00.0 eth0: link down
[   15.205937] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.206212] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.707687] init: samba-ad-dc main process (769) terminated with status 1
[   16.795502] r8169 0000:02:00.0 eth0: link up
[   16.795513] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   17.205433] init: alsa-restore main process (1077) terminated with status 99
[   17.964674] init: plymouth-upstart-bridge main process ended, respawning
[   17.972604] init: plymouth-upstart-bridge main process (1290) terminated with status 1
[   17.972617] init: plymouth-upstart-bridge main process ended, respawning
[  261.675408] nouveau E[   PFIFO][0000:01:00.0] DMA_PUSHER - ch 3 [Xorg[1292]] get 0x002003b640 put 0x002003ceb4 ib_get 0x000002f0 ib_put 0x000002f1 state 0x80000024 (err: INVALID_CMD) push 0x00400040
[  953.835070] systemd-hostnamed[2587]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!


Ben hiçbirşeye yoramadım açıkcası şuanda 45-50 dk oldu bir takılma yok birazdan Nvidia sürücülerine geçeceğim bakalım orada durum nasıl sonuçları aktarırım.


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 03 Mayıs 2015 - 13:01:38
Yaklaşık 1 saat sonra tekrar dondu  bende kapalı sürücülere geçtim ve biostan Floppyi devre dışı bıraktım ("Bu arada youtube'da donmuştu bakalım biraz youtubeda takılayım yine sonuçları buradan geçerim. ")

[speakerXXL]

Aşağıdaki komutların çıktılarını rica edelim.

Kod Seç Genişlet

cat /etc/X11/xorg.conf
dpkg -l | egrep 'nvidia|prime'
lspci | egrep 'VGA|3D|Display'
inxi -Fxz


[mehmet015]

Aşağıdaki komutların çıktılarını rica edelim.

Kod Seç Genişlet

cat /etc/X11/xorg.conf
dpkg -l | egrep 'nvidia|prime'
lspci | egrep 'VGA|3D|Display'
inxi -Fxz


İlginiz için teşekkür ederim hocam fakat sorunu bios'tan floppy'i iptal ederek ve kapalı ekran kartı sürücülerine geçerek çözdüm.

[if]

cozuldukonusu