[Çözüldü] wireless sorunu

[hüseyinbozan]

Arkadaşlar merhaba, açılan konulardaki wireless sorunu ile ilgi yazıları okudum fakat kendime çözüm bulamadım. olaki gözden kaçmış ise af ola, ubuntu 12. sürümünü yükledim netbook'un kamerası bile çalıştı wirelessde sorun yoktu, fakat formatlayıp sürümü 14.04 lts sürümüne yükselttim fakat wireless driveri yüklü değil sanırım. şimdiden teşekkür ederim.

Kod Seç Genişlet

]wlan0     802.11b/g  Mode:Managed  Frequency=2.422 GHz 
          Access Point: Not-Associated   Bit Rate:11 Mb/s   
          Retry min limit:7   RTS thr:off   Fragment thr:off
          Power Management:off
          Link Quality=0/100  Signal level=0 dBm  Noise level=0 dBm
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

lo        no wireless extensions.

eth0      no wireless extensions.
çıktı böyle arkadaşlar.

[heartsmagic]

Tüm çıktıları geçer misin lütfen:
agkomut

[Serhat Uğur ÖNER]

Merhaba,

Ben de wireless adaptör driver yükleme sorunu yaşıyorum. Kurulum DVD si elimde. İçinde Linux sürümü de var. Ancak nasıl kurulur bilemiyorum. Henüz 2 günlük Ubuntu kullanıcısıyım lütfen en basit düzeyde anlatın.


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 24 Şubat 2015 - 19:09:40
Birkaç soru sorarak konuyu uzatmak istemem kusura bakmayın ancak yeni bir Linux kullanıcısı olduğum için anlayış lütfen.

Flash Player kurdum. Benzeri bir iki program daha kurdum forumdaki başlıkları okuyunca. Ancak yine de internetten video izleme sorunu yaşıyorum. Facebook oyunları da açmıyor PC. Eklenti hatası diyor neler yapmalıyım.

Son olarak iki gün önce Windows Ultimate den Ubuntu 14.10 a geçtim. Eskiden çok fazla kasma vardı Ubuntu ile biraz azaldı diyebilirim. Bilgisayar da pek iyi sayılmaz. Ancak özellikle yeni bir şey çalıştırırken 10 saniye kadar takılma yapıyor. Acaba daha alt sürümü kursam sorun giderilir mi. Ya da ne yapmalıyım?

[hüseyinbozan]

hemen atıyorum hocam.

Kod Seç Genişlet

cat /etc/lsb-release

Kod Seç Genişlet

DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=14.04
DISTRIB_CODENAME=trusty
DISTRIB_DESCRIPTION="Ubuntu 14.04.2 LTS"

Kod Seç Genişlet

uname -a

Kod Seç Genişlet

Linux huseyinbozan 3.13.0-45-generic #74-Ubuntu SMP Tue Jan 13 19:37:48 UTC 2015 i686 i686 i686 GNU/Linux

Kod Seç Genişlet

lspci

Kod Seç Genişlet

00:00.0 Host bridge: Intel Corporation Mobile 945GSE Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GSE Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 3 (rev 02)
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 02)
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 02)
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] (rev 02)
00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 02)
02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8187SE Wireless LAN Controller (rev 22)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 01)


Kod Seç Genişlet

lsusb

Kod Seç Genişlet

Bus 001 Device 003: ID 0bda:0156 Realtek Semiconductor Corp. Mass Storage Device
Bus 001 Device 002: ID 0ac8:3420 Z-Star Microelectronics Corp. Venus USB2.0 Camera
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 002: ID 0a5c:2162 Broadcom Corp.
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


Kod Seç Genişlet

rfkill list

Kod Seç Genişlet

1: hci0: Bluetooth
Soft blocked: yes
Hard blocked: no


Kod Seç Genişlet

sudo lshw -C network

Kod Seç Genişlet

      açıklama: Kablosuz arayüz
       ürün: RTL8187SE Wireless LAN Controller
       üretici: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:02:00.0
       mantıksal ad: wlan0
       sürüm: 22
       serial: 00:22:5f:65:fe:69
       genişlik: 32 bits
       saat: 33MHz
       kapasiteler: pm msi pciexpress bus_master cap_list eternet physical wireless
       yapılandırma: broadcast=yes driver=r8180 latency=0 multicast=yes wireless=802.11b/g
       kaynaklar: irq:17 ioport:dc00(boyut=256) bellek:feafc000-feafffff
  *-network
       açıklama: Eternet interface
       ürün: RTL8101E/RTL8102E PCI Express Fast Ethernet controller
       üretici: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:03:00.0
       mantıksal ad: eth0
       sürüm: 01
       serial: 00:22:68:50:29:f0
       boyut: 100Mbit/s
       kapasite: 100Mbit/s
       genişlik: 64 bits
       saat: 33MHz
       kapasiteler: pm vpd msi pciexpress bus_master cap_list rom eternet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
       yapılandırma: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.2.184 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s
       kaynaklar: irq:43 ioport:ec00(boyut=256) bellek:febff000-febfffff bellek:febc0000-febdffff


Kod Seç Genişlet

ifconfig

Kod Seç Genişlet

eth0      Link encap:Ethernet  HWaddr 00:22:68:50:29:f0 
          inet addr:192.168.2.184  Bcast:192.168.2.255  Mask:255.255.255.0
          inet6 addr: fe80::222:68ff:fe50:29f0/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1511553 errors:0 dropped:0 overruns:0 frame:0
          TX packets:690587 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:2158278068 (2.1 GB)  TX bytes:61377576 (61.3 MB)

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Sunucu
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:19238 errors:0 dropped:0 overruns:0 frame:0
          TX packets:19238 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:2683347 (2.6 MB)  TX bytes:2683347 (2.6 MB)

wlan0     Link encap:Ethernet  HWaddr 00:22:5f:65:fe:69 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:17 Hafıza:f84e0000-f84e0100

Kod Seç Genişlet

iwconfig

Kod Seç Genişlet

wlan0     802.11b/g  Mode:Managed  Frequency=2.422 GHz 
          Access Point: Not-Associated   Bit Rate:11 Mb/s   
          Retry min limit:7   RTS thr:off   Fragment thr:off
          Power Management:off
          Link Quality=0/100  Signal level=0 dBm  Noise level=0 dBm
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

lo        no wireless extensions.

eth0      no wireless extensions.


Kod Seç Genişlet

iwlist scanning

Kod Seç Genişlet

wlan0     No scan results

lo        Interface doesn't support scanning.

eth0      Interface doesn't support scanning.


Kod Seç Genişlet

lsmod

Kod Seç Genişlet

Module                  Size  Used by
wl                   3999690  0
lib80211               14040  1 wl
cfg80211              409394  1 wl
dm_crypt               22589  0
gpio_ich               13229  0
snd_hda_codec_realtek    59259  1
snd_hda_intel          42794  5
uvcvideo               71309  0
snd_hda_codec         164067  2 snd_hda_codec_realtek,snd_hda_intel
videobuf2_vmalloc      13048  1 uvcvideo
coretemp               13195  0
snd_hwdep              13272  1 snd_hda_codec
videobuf2_memops       13170  1 videobuf2_vmalloc
snd_pcm                85501  3 snd_hda_codec,snd_hda_intel
snd_page_alloc         14230  2 snd_pcm,snd_hda_intel
joydev                 17101  0
videobuf2_core         39258  1 uvcvideo
snd_seq_midi           13132  0
videodev              108503  2 uvcvideo,videobuf2_core
rfcomm                 53664  8
bnep                   18895  2
serio_raw              13230  0
snd_seq_midi_event     14475  1 snd_seq_midi
snd_rawmidi            25135  1 snd_seq_midi
snd_seq                55383  2 snd_seq_midi_event,snd_seq_midi
snd_seq_device         14137  3 snd_seq,snd_rawmidi,snd_seq_midi
lpc_ich                16864  0
snd_timer              28584  2 snd_pcm,snd_seq
btusb                  27580  0
r8187se               155125  0
bluetooth             342208  22 bnep,btusb,rfcomm
eeprom_93cx6           13168  1 r8187se
snd                    60939  19 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi
shpchp                 32128  0
soundcore              12600  1 snd
mac_hid                13037  0
parport_pc             31981  0
ppdev                  17391  0
lp                     13299  0
parport                40836  3 lp,ppdev,parport_pc
usb_storage            48417  0
r8169                  61562  0
psmouse                91357  0
i915                  710013  3
pata_acpi              12886  0
i2c_algo_bit           13197  1 i915
mii                    13654  1 r8169
drm_kms_helper         48868  1 i915
video                  18903  1 i915
drm                   244037  4 i915,drm_kms_helper

Kod Seç Genişlet

dmesg

Kod Seç Genişlet

[    1.489085] vesafb: framebuffer at 0xd0000000, mapped to 0xf8480000, using 1920k, total 1920k
[    1.515757] Console: switching to colour frame buffer device 100x37
[    1.541967] fb0: VESA VGA frame buffer device
[    1.542034] intel_idle: MWAIT substates: 0x20220
[    1.542051] intel_idle: v0.4 model 0x1C
[    1.542056] intel_idle: lapic_timer_reliable_states 0x2
[    1.542061] tsc: Marking TSC unstable due to TSC halts in idle states deeper than C2
[    1.542207] ipmi message handler version 39.2
[    1.542436] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.542676] ACPI: AC Adapter [AC] (on-line)
[    1.543112] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    1.543125] ACPI: Power Button [PWRB]
[    1.543244] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    1.543288] ACPI: Lid Switch [LID]
[    1.543399] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.543408] ACPI: Power Button [PWRF]
[    1.543711] GHES: HEST is not enabled!
[    1.544190] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.546358] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.546386] ACPI: Battery Slot [BAT1] (battery present)
[    1.546467] isapnp: Scanning for PnP cards...
[    1.549543] Linux agpgart interface v0.103
[    1.549733] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[    1.549868] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[    1.550025] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    1.550258] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    1.555622] brd: module loaded
[    1.558430] loop: module loaded
[    1.558985] ata_piix 0000:00:1f.2: version 2.13
[    1.559215] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[    1.568125] scsi0 : ata_piix
[    1.568355] scsi1 : ata_piix
[    1.568490] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    1.568498] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    1.569987] libphy: Fixed MDIO Bus: probed
[    1.570509] tun: Universal TUN/TAP device driver, 1.6
[    1.570515] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.570738] PPP generic driver version 2.4.2
[    1.570895] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.570912] ehci-pci: EHCI PCI platform driver
[    1.571205] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.571227] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.571257] ehci-pci 0000:00:1d.7: debug port 1
[    1.575215] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    1.575290] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe937c00
[    1.584052] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.584289] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.584299] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.584306] usb usb1: Product: EHCI Host Controller
[    1.584314] usb usb1: Manufacturer: Linux 3.13.0-45-generic ehci_hcd
[    1.584321] usb usb1: SerialNumber: 0000:00:1d.7
[    1.584702] hub 1-0:1.0: USB hub found
[    1.584737] hub 1-0:1.0: 8 ports detected
[    1.585390] ehci-platform: EHCI generic platform driver
[    1.585436] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.585442] ohci-pci: OHCI PCI platform driver
[    1.585487] ohci-platform: OHCI generic platform driver
[    1.585520] uhci_hcd: USB Universal Host Controller Interface driver
[    1.585770] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.585790] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.585842] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000cc00
[    1.586059] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.586068] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.586076] usb usb2: Product: UHCI Host Controller
[    1.586084] usb usb2: Manufacturer: Linux 3.13.0-45-generic uhci_hcd
[    1.586091] usb usb2: SerialNumber: 0000:00:1d.0
[    1.586460] hub 2-0:1.0: USB hub found
[    1.586495] hub 2-0:1.0: 2 ports detected
[    1.586991] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.587015] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.587098] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c880
[    1.587281] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.587290] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.587298] usb usb3: Product: UHCI Host Controller
[    1.587306] usb usb3: Manufacturer: Linux 3.13.0-45-generic uhci_hcd
[    1.587313] usb usb3: SerialNumber: 0000:00:1d.1
[    1.587646] hub 3-0:1.0: USB hub found
[    1.587675] hub 3-0:1.0: 2 ports detected
[    1.588186] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.588206] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.588288] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c800
[    1.588467] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.588477] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.588485] usb usb4: Product: UHCI Host Controller
[    1.588492] usb usb4: Manufacturer: Linux 3.13.0-45-generic uhci_hcd
[    1.588500] usb usb4: SerialNumber: 0000:00:1d.2
[    1.588836] hub 4-0:1.0: USB hub found
[    1.588866] hub 4-0:1.0: 2 ports detected
[    1.589325] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.589345] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.589429] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c480
[    1.589609] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.589618] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.589626] usb usb5: Product: UHCI Host Controller
[    1.589634] usb usb5: Manufacturer: Linux 3.13.0-45-generic uhci_hcd
[    1.589641] usb usb5: SerialNumber: 0000:00:1d.3
[    1.589973] hub 5-0:1.0: USB hub found
[    1.590002] hub 5-0:1.0: 2 ports detected
[    1.590549] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.596259] i8042: Detected active multiplexing controller, rev 1.1
[    1.598374] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.598395] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.598490] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.598576] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.598667] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.599088] mousedev: PS/2 mouse device common for all mice
[    1.599603] rtc_cmos 00:02: RTC can wake from S4
[    1.599933] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.599985] rtc_cmos 00:02: alarms up to one month, 114 bytes nvram, hpet irqs
[    1.600346] device-mapper: uevent: version 1.0.3
[    1.600590] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    1.600669] platform eisa.0: Probing EISA bus 0
[    1.600681] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    1.600691] platform eisa.0: Cannot allocate resource for EISA slot 1
[    1.600700] platform eisa.0: Cannot allocate resource for EISA slot 2
[    1.600710] platform eisa.0: Cannot allocate resource for EISA slot 3
[    1.600719] platform eisa.0: Cannot allocate resource for EISA slot 4
[    1.600729] platform eisa.0: Cannot allocate resource for EISA slot 5
[    1.600738] platform eisa.0: Cannot allocate resource for EISA slot 6
[    1.600748] platform eisa.0: Cannot allocate resource for EISA slot 7
[    1.600757] platform eisa.0: Cannot allocate resource for EISA slot 8
[    1.600765] platform eisa.0: EISA: Detected 0 cards
[    1.600784] cpufreq-nforce2: No nForce2 chipset.
[    1.600794] ledtrig-cpu: registered to indicate activity on CPUs
[    1.601314] TCP: cubic registered
[    1.601673] NET: Registered protocol family 10
[    1.602347] NET: Registered protocol family 17
[    1.602394] Key type dns_resolver registered
[    1.602963] Using IPI No-Shortcut mode
[    1.603155] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.603765] Loading compiled-in X.509 certificates
[    1.617196] Loaded X.509 cert 'Magrathea: Glacier signing key: 3689bf48af502cbafe71e5c25d6c55340b7f13ff'
[    1.617235] registered taskstats version 1
[    1.627439] Key type trusted registered
[    1.635426] Key type encrypted registered
[    1.643503] AppArmor: AppArmor sha1 policy hashing enabled
[    1.643515] IMA: No TPM chip found, activating TPM-bypass!
[    1.644112] regulator-dummy: disabling
[    1.644292]   Magic number: 3:803:557
[    1.644483] rtc_cmos 00:02: setting system clock to 2015-02-24 00:35:05 UTC (1424738105)
[    1.646011] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.646018] EDD information not available.
[    1.646105] PM: Hibernation image not present or could not be loaded.
[    1.736241] ata1.00: ATA-8: FUJITSU MHZ2160BH, 00000009, max UDMA/100
[    1.736251] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.752233] ata1.00: configured for UDMA/100
[    1.856919] isapnp: No Plug & Play device found
[    1.857252] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHZ2160B 0000 PQ: 0 ANSI: 5
[    1.857610] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.857728] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.857819] sd 0:0:0:0: [sda] Write Protect is off
[    1.857831] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.857941] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.890860]  sda: sda1 sda2 < sda5 >
[    1.891792] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.892657] Freeing unused kernel memory: 876K (c19bb000 - c1a96000)
[    1.893065] Write protecting the kernel text: 6552k
[    1.893234] Write protecting the kernel read-only data: 2768k
[    1.893240] NX-protecting the kernel data: 5736k
[    1.896167] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.933667] systemd-udevd[100]: starting version 204
[    2.066518] [drm] Initialized drm 1.1.0 20060810
[    2.090859] ACPI: Video Device [IGD] (multi-head: yes  rom: no  post: no)
[    2.091247] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
[    2.092135] usb 1-1: New USB device found, idVendor=0ac8, idProduct=3420
[    2.092148] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.092157] usb 1-1: Product: Sirius USB2.0 Camera
[    2.092166] usb 1-1: Manufacturer: Vimicro Corp.
[    2.267135] [drm] Memory usable by graphics device = 256M
[    2.267150] checking generic (d0000000 1e0000) vs hw (d0000000 10000000)
[    2.267157] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[    2.267208] Console: switching to colour dummy device 80x25
[    2.281582] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.281592] [drm] Driver supports precise vblank timestamp query.
[    2.282278] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.317055] usb 1-6: new high-speed USB device number 3 using ehci-pci
[    2.344238] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.344287] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    2.344682] r8169 0000:03:00.0: irq 43 for MSI/MSI-X
[    2.345287] r8169 0000:03:00.0 eth0: RTL8101e at 0xf841e000, 00:22:68:50:29:f0, XID 94200000 IRQ 43
[    2.386017] [drm] initialized overlay support
[    2.539242] usb 1-6: New USB device found, idVendor=0bda, idProduct=0156
[    2.539254] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.539262] usb 1-6: Product: USB2.0-CRW
[    2.539270] usb 1-6: Manufacturer: Generic
[    2.539277] usb 1-6: SerialNumber: 20060413092100000
[    2.699293] fbcon: inteldrmfb (fb0) is primary device
[    2.827893] usb-storage 1-6:1.0: USB Mass Storage device detected
[    2.828423] scsi2 : usb-storage 1-6:1.0
[    2.828732] usbcore: registered new interface driver usb-storage
[    3.052093] Console: switching to colour frame buffer device 128x37
[    3.060847] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.060854] i915 0000:00:02.0: registered panic notifier
[    3.128083] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    3.139808] usb 5-1: new full-speed USB device number 2 using uhci_hcd
[    3.429543] usb 5-1: New USB device found, idVendor=0a5c, idProduct=2162
[    3.429556] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.429565] usb 5-1: Product: Broadcom 2046 Bluetooth 2.1+EDR USB Device
[    3.429572] usb 5-1: Manufacturer: Broadcom Corp
[    3.730571] input: ALPS PS/2 Device as /devices/platform/i8042/serio2/input/input11
[    3.748900] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input10
[    3.834823] scsi 2:0:0:0: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0 CCS
[    3.841454] scsi 2:0:0:1: Direct-Access     Generic- MS/MS-Pro        1.00 PQ: 0 ANSI: 0 CCS
[    3.845692] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    3.847038] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[    3.847182] sd 2:0:0:1: Attached scsi generic sg2 type 0
[    3.850676] sd 2:0:0:1: [sdc] Attached SCSI removable disk
[    3.861893] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[    3.861905] EXT4-fs (sda1): write access will be enabled during recovery
[    5.897203] EXT4-fs (sda1): orphan cleanup on readonly fs
[    5.897403] EXT4-fs (sda1): 1 orphan inode deleted
[    5.897409] EXT4-fs (sda1): recovery complete
[    6.001558] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    6.133494] random: nonblocking pool is initialized
[   16.721716] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.160126] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   17.244777] systemd-udevd[310]: starting version 204
[   17.697451] lp: driver loaded but no devices found
[   17.797071] ppdev: user-space parallel port driver
[   18.498996] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   18.984090] Bluetooth: Core ver 2.17
[   18.994454] NET: Registered protocol family 31
[   18.994465] Bluetooth: HCI device and connection manager initialized
[   18.994490] Bluetooth: HCI socket layer initialized
[   18.994506] Bluetooth: L2CAP socket layer initialized
[   18.994542] Bluetooth: SCO socket layer initialized
[   19.034074] r8187se: module is from the staging directory, the quality is unknown, you have been warned.
[   19.109188] intel_rng: FWH not detected
[   19.112830] r8187se:
[   19.112830] Linux kernel driver for RTL8180 / RTL8185 based WLAN cards
[   19.112842] r8187se: Copyright (c) 2004-2005, Andrea Merello
[   19.112847] r8180: Initializing module
[   19.112853] r8180: Wireless extensions version 22
[   19.112857] r8180: Initializing proc filesystem
[   19.112923] r8180: Configuring chip resources
[   19.136613] usbcore: registered new interface driver btusb
[   19.141225] rtl8180_init:Error channel plan! Set to default.
[   19.141237] r8180: Channel plan is 0
[   19.141237]
[   19.141246] Dot11d_Init()
[   19.141258] r8180: MAC controller is a RTL8187SE b/g
[   19.143466] r8180: usValue is 0x100
[   19.143466]
[   19.183009] r8180: WW:**PLEASE** REPORT SUCCESSFUL/UNSUCCESSFUL TO Realtek!
[   19.193175] r8180: IRQ 17
[   19.228639] r8180: Driver probe completed
[   19.228639]
[   19.260351] leds_ss4200: no LED devices found
[   19.556110] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   19.556120] Bluetooth: BNEP filters: protocol multicast
[   19.556145] Bluetooth: BNEP socket layer initialized
[   19.581429] type=1400 audit(1424738123.434:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=477 comm="apparmor_parser"
[   19.581458] type=1400 audit(1424738123.434:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=477 comm="apparmor_parser"
[   19.594619] type=1400 audit(1424738123.446:4): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=477 comm="apparmor_parser"
[   19.658023] Bluetooth: RFCOMM TTY layer initialized
[   19.658052] Bluetooth: RFCOMM socket layer initialized
[   19.658078] Bluetooth: RFCOMM ver 1.11
[   19.835234] Linux video capture interface: v2.00
[   20.313158] init: cups main process (487) killed by HUP signal
[   20.313224] init: cups main process ended, respawning
[   20.545945] type=1400 audit(1424738124.398:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=521 comm="apparmor_parser"
[   20.545975] type=1400 audit(1424738124.398:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=521 comm="apparmor_parser"
[   20.545994] type=1400 audit(1424738124.398:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=521 comm="apparmor_parser"
[   20.548106] type=1400 audit(1424738124.398:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=521 comm="apparmor_parser"
[   20.548137] type=1400 audit(1424738124.402:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=521 comm="apparmor_parser"
[   20.549213] type=1400 audit(1424738124.402:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=521 comm="apparmor_parser"
[   20.846646] uvcvideo: Found UVC 1.00 device Sirius USB2.0 Camera (0ac8:3420)
[   20.851873] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   20.853039] input: Sirius USB2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/input/input14
[   20.855479] usbcore: registered new interface driver uvcvideo
[   20.855488] USB Video Class driver (1.1.1)
[   20.997278] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   20.997292]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   20.997299]    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   20.997304]    mono: mono_out=0x0
[   20.997309]    inputs:
[   20.997317]      Internal Mic=0x19
[   20.997324]      Mic=0x18
[   20.997330] realtek: Enable default setup for auto mode as fallback
[   21.024516] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   21.025784] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   21.383265] gpio_ich: GPIO from 206 to 255 on gpio_ich
[   23.170064] init: failsafe main process (587) killed by TERM signal
[   24.553716] type=1400 audit(1424738128.406:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=878 comm="apparmor_parser"
[   24.634969] audit_printk_skb: 24 callbacks suppressed
[   24.634983] type=1400 audit(1424738128.486:20): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=881 comm="apparmor_parser"
[   24.635015] type=1400 audit(1424738128.486:21): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*" pid=881 comm="apparmor_parser"
[   24.635041] type=1400 audit(1424738128.486:22): apparmor="STATUS" operation="profile_load" profile="unconfined" name="pxgsettings" pid=881 comm="apparmor_parser"
[   24.635067] type=1400 audit(1424738128.486:23): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=881 comm="apparmor_parser"
[   24.635093] type=1400 audit(1424738128.486:24): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-ofono" pid=881 comm="apparmor_parser"
[   24.654090] type=1400 audit(1424738128.506:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/telepathy/telepathy-*" pid=881 comm="apparmor_parser"
[   24.668131] type=1400 audit(1424738128.522:26): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="pxgsettings" pid=881 comm="apparmor_parser"
[   24.668165] type=1400 audit(1424738128.522:27): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=881 comm="apparmor_parser"
[   24.668191] type=1400 audit(1424738128.522:28): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/telepathy/telepathy-ofono" pid=881 comm="apparmor_parser"
[   24.668879] type=1400 audit(1424738128.522:29): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=879 comm="apparmor_parser"
[   24.794203] cfg80211: Calling CRDA to update world regulatory domain
[   24.798055] r8180: Bringing up iface
[   24.996622] r8180: Card successfully reset
[   25.736022] r8180: WIRELESS_MODE_G
[   25.736022]
[   25.750237] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   25.751207] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   25.752201] cfg80211: World regulatory domain updated:
[   25.752211] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   25.752219] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   25.752226] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   25.752233] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   25.752240] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   25.752247] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   25.777238] r8169 0000:03:00.0 eth0: link down
[   25.777265] r8169 0000:03:00.0 eth0: link down
[   25.777347] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   25.778406] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   27.542243] r8169 0000:03:00.0 eth0: link up
[   27.542271] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   30.774056] init: plymouth-upstart-bridge main process ended, respawning
[   50.181765] audit_printk_skb: 96 callbacks suppressed
[   50.181776] type=1400 audit(1424738154.032:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1709 comm="apparmor_parser"
[   50.181797] type=1400 audit(1424738154.032:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1709 comm="apparmor_parser"
[   50.183227] type=1400 audit(1424738154.032:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1709 comm="apparmor_parser"
[   92.314802] perf samples too long (2535 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[  146.280559] r8169 0000:03:00.0 eth0: link down
[  151.209205] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  166.831854] r8169 0000:03:00.0 eth0: link up
[  166.831880] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  245.373433] perf samples too long (5012 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
[  338.316666] systemd-hostnamed[2770]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[  400.594085] lib80211: common routines for IEEE802.11 drivers
[  400.594100] lib80211_crypt: registered algorithm 'NULL'
[  400.602014] wl: module license 'MIXED/Proprietary' taints kernel.
[  400.602029] Disabling lock debugging due to kernel taint
[  400.623262] wl: module verification failed: signature and/or  required key missing - tainting kernel
[ 1428.137856] perf samples too long (10001 > 10000), lowering kernel.perf_event_max_sample_rate to 12500
[21458.825324] plugin-containe[11185]: segfault at 6 ip aed0931e sp bfebe410 error 4 in libflashplayer.so[ae56d000+1022000]
[27274.401187] plugin-containe[11996]: segfault at 6 ip aed0931e sp bf928d90 error 4 in libflashplayer.so[ae56d000+1022000]
[52235.938029] PM: Syncing filesystems ... done.
[52236.109203] PM: Preparing system for mem sleep
[52236.109401] Freezing user space processes ... (elapsed 0.005 seconds) done.
[52236.114475] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[52236.115879] PM: Entering mem sleep
[52236.115938] Suspending console(s) (use no_console_suspend to debug)
[52236.116461] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[52236.116723] sd 0:0:0:0: [sda] Stopping disk
[52237.080101] PM: suspend of devices complete after 963.864 msecs
[52237.096147] PM: late suspend of devices complete after 16.033 msecs
[52237.096479] pcieport 0000:00:1c.2: System wakeup enabled by ACPI
[52237.112209] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[52237.128133] uhci_hcd 0000:00:1d.3: System wakeup enabled by ACPI
[52237.128208] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
[52237.128281] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
[52237.128354] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[52237.128554] PM: noirq suspend of devices complete after 32.400 msecs
[52237.128601] ACPI: Preparing to enter system sleep state S3
[52237.128973] PM: Saving platform NVS memory
[52237.129778] Disabling non-boot CPUs ...
[52237.232036] smpboot: CPU 1 is now offline
[52237.232372] ACPI: Low-level resume complete
[52237.232372] PM: Restoring platform NVS memory
[52237.232372] Force enabled HPET at resume
[52237.232372] Enabling non-boot CPUs ...
[52237.232372] x86: Booting SMP configuration:
[52237.232372] smpboot: Booting Node 0 Processor 1 APIC 0x1
[52237.131626] Initializing CPU#1
[52237.131626] Atom PSE erratum detected, BIOS microcode update recommended
[52237.131626] Disabled fast string operations
[52237.244967] CPU1 is up
[52237.245508] ACPI: Waking up from system sleep state S3
[52237.276383] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[52237.276463] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
[52237.276539] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
[52237.276616] uhci_hcd 0000:00:1d.3: System wakeup disabled by ACPI
[52237.292086] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[52237.340295] PM: noirq resume of devices complete after 94.190 msecs
[52237.340692] PM: early resume of devices complete after 0.347 msecs
[52237.344381] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[52237.344782] usb usb2: root hub lost power or was reset
[52237.345010] usb usb3: root hub lost power or was reset
[52237.345229] usb usb4: root hub lost power or was reset
[52237.345449] usb usb5: root hub lost power or was reset
[52237.346029] pcieport 0000:00:1c.2: System wakeup disabled by ACPI
[52237.596102] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[52237.840092] usb 1-6: reset high-speed USB device number 3 using ehci-pci
[52238.280110] usb 5-1: reset full-speed USB device number 2 using uhci_hcd
[52238.520250] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[52238.520256] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[52238.622090] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[52238.636250] ata1.00: configured for UDMA/100
[52238.640477] sd 0:0:0:0: [sda] Starting disk
[52238.657402] PM: resume of devices complete after 1316.699 msecs
[52238.706239] PM: Finishing wakeup.
[52238.706244] Restarting tasks ... done.
[52238.732643] video LNXVIDEO:00: Restoring backlight state
[52240.359409] input: ALPS PS/2 Device as /devices/platform/i8042/serio2/input/input21
[52240.381931] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input20
[52240.514861] r8180: Bringing up iface
[52240.713423] r8180: Card successfully reset
[52241.453185] r8180: WIRELESS_MODE_G
[52241.453185]
[52241.469595] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[52241.533271] r8169 0000:03:00.0 eth0: link down
[52241.533359] r8169 0000:03:00.0 eth0: link down
[52241.533394] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[52243.187737] r8169 0000:03:00.0 eth0: link up
[52243.187759] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready


Kod Seç Genişlet

dmesg | tail

Kod Seç Genişlet

[52240.514861] r8180: Bringing up iface
[52240.713423] r8180: Card successfully reset
[52241.453185] r8180: WIRELESS_MODE_G
[52241.453185]
[52241.469595] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[52241.533271] r8169 0000:03:00.0 eth0: link down
[52241.533359] r8169 0000:03:00.0 eth0: link down
[52241.533394] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[52243.187737] r8169 0000:03:00.0 eth0: link up
[52243.187759] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready


[heartsmagic]

r8187se modülünün sürücüyü sağlıyor olması lazım esasında, sistemin güncel mi @hüseyinbozan? Ayrıca modeme uzaklığın ne durumda, son olarak da nasıl bir ağdan internete çıkmaya çalışıyorsun?

@Serhat Uğur ÖNER, foruma hoş geldin. Senin sorununu bu başlıkta konuşmayalım. Hem başlık sahibi olan arkadaşın işleri karışır hem de senin. Yeni bir başlık aç ve sen de @hüseyinbozan'ın yaptığı gibi ilgili çıktıları buraya geç: agkomut
Bunu yapmak için yukarıdaki bağlantıya gidecek, orada gördüğün komutları tek tek ctrl+alt+t ile açacağın uçbirimde uygulayacaksın. Sonra bunları açacağın başlığa kopyalayıp yapıştır ve lütfen kod etiketi içine al: kodetiketi

Ayrıca, forumda her başlıkta sadece bir tek sorunu konuşuyoruz ki yine düzenimiz bozulmasın. Sen her sorunun için ayrı bir başlık aç ve lütfen verebildiğin kadar ayrıntı ver bizlere.

[Serhat Uğur ÖNER]

İşte bir sorun da orada ben konu açmayı da öğrenemedim


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 25 Şubat 2015 - 00:39:23

Kod Seç Genişlet

DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=14.10
DISTRIB_CODENAME=utopic
DISTRIB_DESCRIPTION="Ubuntu 14.10"




Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 25 Şubat 2015 - 00:40:26
Belki olmuştur diye denedim de yeni konu olmamış

[hüseyinbozan]

Hocam sürüm güncel, formatlarken 3.grup şeyleri yüklemesi için hatta kablo ile interneti kullandım. Modeme pek uzak değilim kablo kullanarak interneti kullanıyorum. Şimdi modemin yanına gidip birde wireless algılayacak mı bakacağım. Wireless ağları göstermiyor. Modemin yanında şuan netbook fakat  kablosuz ağlara giriyorum hiç ağ göstermiyor. Kablosuz etkin noktasını kapayamıyorum. Uçak modunu açarak tekrar kapamayı duşundum ve oldu sanırım nasıl oldu anlamadım ama teşekkür ederim.


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 25 Şubat 2015 - 02:00:40
Kablosuz ağ göstermediği için bir kablosuz ağ için uğraştım ve kendiliğinden bir ağ kurmayı denedim olmadı. Wireless simgesinde orijinalde ağları göstermesi gerekiyordu, ne yaptım olmadı. Şimdi de uçak modu açıp kablosuz etkin noktasını kapatarak kablosuz ağları 

[heartsmagic]

@hüseyinbozan, sorun nasıl çözüldü?

@Serhat Uğur ÖNER, https://forum.ubuntu-tr.net/index.php?board=330.0 bağlantısına gidip sağ üstten "Yeni Konu" diyecek ve bilgileri gireceksin. Yalnız, sana verdiğim diğer bağlantıdaki tüm çıktıları aktar lütfen. Sen sadece bir tanesini aktarmışsın.

Yapmışsın zaten bunu.

[hüseyinbozan]

sistem ayarları-ağ-kablosuz ağlarda herhangi bir wireless'ın çektiği birşey yoktu. sadece kablosuz etkin olarak kullan vardı onu kapatamadım bir türlü hata vardı. sonra uçak modunu açıp onu kapatmayı başardım, yukarıdaki wifi simgesine baktım tekrar baktım ağlar görünür oldu. daha öncede denemiştim olmamıştı nasıl oldu anlamadım açıkcası hocam ama izlediğim yol o şekildeydi.