Klavye shift tuşu ve memory stick ışığı takıldı

[YSinan]

Merhaba arkadaşlar

Xubuntu 12 den bu yana klavyenin Shift  butonu çalışmıyor ,  forumdaki benzer çözümleri taradığım halde çözülmedi .
Doğru dürüst gülemiyorum *-* hazır gülümsemelerde olmasa işim zor : )
Keyboard input method da Input method sürekli English ve Turkish yükleniyor  English  adeta silindiği halde silinmiyor ...
Birde memory stick ışığı kullanmadığım halde sürekli yanıyor.

Sony Vaio VGN-FS285 H  Xubuntu  14.04
Ayarlarım
Harware » Keyboard»Layout  Use system default
Keyboard input method » Input method    English  Turkish   çeşitli varyasyonları denendi
On board preferences » keyboard »advanced» Input options» XInput ve  Gtk   sırasıyla denendi
Yardımlarınız için şimdiden teşekkürler

lspci  çıktısı

Kod Seç Genişlet

00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03)
00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03)
00:1d.0 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
00:1d.3 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: NVIDIA Corporation NV44M [GeForce Go 6200] (rev a1)
06:03.0 CardBus bridge: Texas Instruments PCI7420 CardBus Controller
06:03.2 FireWire (IEEE 1394): Texas Instruments PCI7x20 1394a-2000 OHCI Two-Port PHY/Link-Layer Controller
06:03.3 Mass storage controller: Texas Instruments PCI7420/7620 SD/MS-Pro Controller
06:04.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
06:08.0 Ethernet controller: Intel Corporation 82562ET/EZ/GT/GZ - PRO/100 VE (LOM) Ethernet Controller Mobile (rev 03)


Xinput  çıktısı

Kod Seç Genişlet

⎡ Virtual core pointer                    id=2 [master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer              id=4 [slave  pointer  (2)]
⎜   ↳ AlpsPS/2 ALPS GlidePoint                id=11 [slave  pointer  (2)]
⎜   ↳ ALPS PS/2 Device                        id=12 [slave  pointer  (2)]
⎣ Virtual core keyboard                    id=3 [master keyboard (2)]
    ↳ Virtual core XTEST keyboard              id=5 [slave  keyboard (3)]
    ↳ Power Button                            id=6 [slave  keyboard (3)]
    ↳ Video Bus                                id=7 [slave  keyboard (3)]
    ↳ Sony Vaio Keys                          id=8 [slave  keyboard (3)]
    ↳ Power Button                            id=9 [slave  keyboard (3)]
    ↳ AT Translated Set 2 keyboard            id=10 [slave  keyboard (3)]


cat /var/log/Xorg.0.log   çıktısı

Kod Seç Genişlet

cat /var/log/Xorg.0.log
[    25.410]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[    25.410] X Protocol Version 11, Revision 0
[    25.410] Build Operating System: Linux 3.2.0-68-generic i686 Ubuntu
[    25.410] Current Operating System: Linux Sinan-Vaio 3.13.0-41-generic #70-Ubuntu SMP Tue Nov 25 14:41:08 UTC 2014 i686
[    25.411] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-41-generic root=UUID=c0ef4fe4-cf5d-4596-be8c-4fbe17cf997f ro quiet splash 8042.nopnp=1 8042.dumbkbd=1
[    25.411] Build Date: 04 November 2014  04:08:38PM
[    25.411] xorg-server 2:1.15.1-0ubuntu2.2 (For technical support please see http://www.ubuntu.com/support)
[    25.411] Current version of pixman: 0.30.2
[    25.411] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[    25.411] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    25.411] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Dec  1 15:38:58 2014
[    25.504] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    25.531] (==) No Layout section.  Using the first Screen section.
[    25.531] (==) No screen section available. Using defaults.
[    25.531] (**) |-->Screen "Default Screen Section" (0)
[    25.531] (**) |   |-->Monitor "<default monitor>"
[    25.531] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[    25.531] (==) Automatically adding devices
[    25.531] (==) Automatically enabling devices
[    25.531] (==) Automatically adding GPU devices
[    25.531] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    25.532] Entry deleted from font path.
[    25.532] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    25.532] Entry deleted from font path.
[    25.532] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    25.532] Entry deleted from font path.
[    25.532] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    25.532] Entry deleted from font path.
[    25.532] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    25.532] Entry deleted from font path.
[    25.532] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[    25.532] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    25.532] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[    25.532] (II) Loader magic: 0xb771a6c0
[    25.532] (II) Module ABI versions:
[    25.532] X.Org ANSI C Emulation: 0.4
[    25.532] X.Org Video Driver: 15.0
[    25.532] X.Org XInput driver : 20.0
[    25.532] X.Org Server Extension : 8.0
[    25.534] (--) PCI:*(0:1:0:0) 10de:0167:104d:81c2 rev 161, Mem @ 0xa0000000/16777216, 0xc0000000/268435456, 0x90000000/16777216, BIOS @ 0x????????/131072
[    25.534] Initializing built-in extension Generic Event Extension
[    25.534] Initializing built-in extension SHAPE
[    25.534] Initializing built-in extension MIT-SHM
[    25.534] Initializing built-in extension XInputExtension
[    25.534] Initializing built-in extension XTEST
[    25.534] Initializing built-in extension BIG-REQUESTS
[    25.534] Initializing built-in extension SYNC
[    25.534] Initializing built-in extension XKEYBOARD
[    25.534] Initializing built-in extension XC-MISC
[    25.534] Initializing built-in extension SECURITY
[    25.534] Initializing built-in extension XINERAMA
[    25.534] Initializing built-in extension XFIXES
[    25.534] Initializing built-in extension RENDER
[    25.534] Initializing built-in extension RANDR
[    25.534] Initializing built-in extension COMPOSITE
[    25.534] Initializing built-in extension DAMAGE
[    25.534] Initializing built-in extension MIT-SCREEN-SAVER
[    25.534] Initializing built-in extension DOUBLE-BUFFER
[    25.534] Initializing built-in extension RECORD
[    25.534] Initializing built-in extension DPMS
[    25.534] Initializing built-in extension Present
[    25.534] Initializing built-in extension DRI3
[    25.534] Initializing built-in extension X-Resource
[    25.534] Initializing built-in extension XVideo
[    25.534] Initializing built-in extension XVideo-MotionCompensation
[    25.534] Initializing built-in extension SELinux
[    25.534] Initializing built-in extension XFree86-VidModeExtension
[    25.534] Initializing built-in extension XFree86-DGA
[    25.534] Initializing built-in extension XFree86-DRI
[    25.534] Initializing built-in extension DRI2
[    25.534] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[    25.534] (II) "glx" will be loaded by default.
[    25.534] (WW) "xmir" is not to be loaded by default. Skipping.
[    25.534] (II) LoadModule: "glx"
[    25.535] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/libglx.so
[    26.004] (II) Module glx: vendor="NVIDIA Corporation"
[    26.004] compiled for 4.0.2, module version = 1.0.0
[    26.004] Module class: X.Org Server Extension
[    26.004] (II) NVIDIA GLX Module  304.117  Tue Nov 26 21:56:56 PST 2013
[    26.004] Loading extension GLX
[    26.004] (==) Matched nvidia as autoconfigured driver 0
[    26.004] (==) Matched nouveau as autoconfigured driver 1
[    26.004] (==) Matched modesetting as autoconfigured driver 2
[    26.004] (==) Matched fbdev as autoconfigured driver 3
[    26.004] (==) Matched vesa as autoconfigured driver 4
[    26.004] (==) Assigned the driver to the xf86ConfigLayout
[    26.004] (II) LoadModule: "nvidia"
[    26.005] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/nvidia_drv.so
[    26.005] (II) Module nvidia: vendor="NVIDIA Corporation"
[    26.005] compiled for 4.0.2, module version = 1.0.0
[    26.005] Module class: X.Org Video Driver
[    26.006] (II) LoadModule: "nouveau"
[    26.024] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    26.035] (II) Module nouveau: vendor="X.Org Foundation"
[    26.036] compiled for 1.15.0, module version = 1.0.10
[    26.036] Module class: X.Org Video Driver
[    26.036] ABI class: X.Org Video Driver, version 15.0
[    26.036] (II) LoadModule: "modesetting"
[    26.036] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    26.037] (II) Module modesetting: vendor="X.Org Foundation"
[    26.037] compiled for 1.15.0, module version = 0.8.1
[    26.037] Module class: X.Org Video Driver
[    26.037] ABI class: X.Org Video Driver, version 15.0
[    26.037] (II) LoadModule: "fbdev"
[    26.037] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    26.038] (II) Module fbdev: vendor="X.Org Foundation"
[    26.038] compiled for 1.15.0, module version = 0.4.4
[    26.038] Module class: X.Org Video Driver
[    26.038] ABI class: X.Org Video Driver, version 15.0
[    26.038] (II) LoadModule: "vesa"
[    26.038] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    26.038] (II) Module vesa: vendor="X.Org Foundation"
[    26.038] compiled for 1.15.0, module version = 2.3.3
[    26.038] Module class: X.Org Video Driver
[    26.038] ABI class: X.Org Video Driver, version 15.0
[    26.038] (II) NVIDIA dlloader X Driver  304.117  Tue Nov 26 21:38:08 PST 2013
[    26.038] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    26.038] (II) NOUVEAU driver Date:   Thu Nov 7 14:56:48 2013 +1000
[    26.038] (II) NOUVEAU driver for NVIDIA chipset families :
[    26.038] RIVA TNT        (NV04)
[    26.039] RIVA TNT2       (NV05)
[    26.039] GeForce 256     (NV10)
[    26.039] GeForce 2       (NV11, NV15)
[    26.039] GeForce 4MX     (NV17, NV18)
[    26.039] GeForce 3       (NV20)
[    26.039] GeForce 4Ti     (NV25, NV28)
[    26.039] GeForce FX      (NV3x)
[    26.039] GeForce 6       (NV4x)
[    26.039] GeForce 7       (G7x)
[    26.039] GeForce 8       (G8x)
[    26.039] GeForce GTX 200 (NVA0)
[    26.039] GeForce GTX 400 (NVC0)
[    26.039] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    26.039] (II) FBDEV: driver for framebuffer: fbdev
[    26.039] (II) VESA: driver for VESA chipsets: vesa
[    26.039] (++) using VT number 7

[    26.041] (II) Loading sub module "fb"
[    26.041] (II) LoadModule: "fb"
[    26.042] (II) Loading /usr/lib/xorg/modules/libfb.so
[    26.042] (II) Module fb: vendor="X.Org Foundation"
[    26.042] compiled for 1.15.1, module version = 1.0.0
[    26.042] ABI class: X.Org ANSI C Emulation, version 0.4
[    26.042] (II) Loading sub module "wfb"
[    26.042] (II) LoadModule: "wfb"
[    26.043] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    26.043] (II) Module wfb: vendor="X.Org Foundation"
[    26.043] compiled for 1.15.1, module version = 1.0.0
[    26.043] ABI class: X.Org ANSI C Emulation, version 0.4
[    26.044] (II) Loading sub module "ramdac"
[    26.044] (II) LoadModule: "ramdac"
[    26.044] (II) Module "ramdac" already built-in
[    26.044] (WW) Falling back to old probe method for modesetting
[    26.044] (EE) open /dev/dri/card0: No such file or directory
[    26.044] (WW) Falling back to old probe method for fbdev
[    26.044] (II) Loading sub module "fbdevhw"
[    26.044] (II) LoadModule: "fbdevhw"
[    26.056] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    26.056] (II) Module fbdevhw: vendor="X.Org Foundation"
[    26.056] compiled for 1.15.1, module version = 0.0.2
[    26.056] ABI class: X.Org Video Driver, version 15.0
[    26.057] (EE) open /dev/fb0: No such file or directory
[    26.057] (WW) Falling back to old probe method for vesa
[    26.057] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[    26.057] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    26.057] (==) NVIDIA(0): RGB weight 888
[    26.057] (==) NVIDIA(0): Default visual is TrueColor
[    26.057] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    26.057] (**) NVIDIA(0): Enabling 2D acceleration
[    26.993] (II) NVIDIA(GPU-0): Display (Nvidia Default Flat Panel (DFP-0)) does not support
[    26.993] (II) NVIDIA(GPU-0):     NVIDIA 3D Vision stereo.
[    26.996] (II) NVIDIA(0): NVIDIA GPU GeForce Go 6200 (NV44) at PCI:1:0:0 (GPU-0)
[    26.996] (--) NVIDIA(0): Memory: 131072 kBytes
[    26.996] (--) NVIDIA(0): VideoBIOS: 05.44.02.23.22
[    26.996] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    26.996] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[    26.996] (--) NVIDIA(0): Valid display device(s) on GeForce Go 6200 at PCI:1:0:0
[    26.996] (--) NVIDIA(0):     CRT-0
[    26.996] (--) NVIDIA(0):     Nvidia Default Flat Panel (DFP-0) (connected)
[    26.996] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[    26.996] (--) NVIDIA(0): Nvidia Default Flat Panel (DFP-0): 310.0 MHz maximum pixel clock
[    26.996] (--) NVIDIA(0): Nvidia Default Flat Panel (DFP-0): Internal Dual Link LVDS
[    26.996] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    26.996] (**) NVIDIA(0):     device Nvidia Default Flat Panel (DFP-0) (Using EDID
[    26.996] (**) NVIDIA(0):     frequencies has been enabled on all display devices.)
[    26.996] (==) NVIDIA(0):
[    26.996] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    26.996] (==) NVIDIA(0):     will be used as the requested mode.
[    26.996] (==) NVIDIA(0):
[    26.996] (II) NVIDIA(0): Validated MetaModes:
[    26.996] (II) NVIDIA(0):     "DFP-0:nvidia-auto-select"
[    26.996] (II) NVIDIA(0): Virtual screen size determined to be 1280 x 800
[    26.997] (WW) NVIDIA(0): Unable to support custom viewPortOut 1280 x 720 +0 +40
[    26.997] (WW) NVIDIA(0): Unable to support custom viewPortOut 1066 x 800 +107 +0
[    26.998] (WW) NVIDIA(0): Unable to support custom viewPortOut 1066 x 800 +107 +0
[    26.998] (WW) NVIDIA(0): Unable to support custom viewPortOut 1066 x 800 +107 +0
[    26.999] (--) NVIDIA(0): DPI set to (101, 101); computed from "UseEdidDpi" X config
[    26.999] (--) NVIDIA(0):     option
[    26.999] (II) UnloadModule: "nouveau"
[    26.999] (II) Unloading nouveau
[    26.999] (II) UnloadModule: "modesetting"
[    26.999] (II) Unloading modesetting
[    26.999] (II) UnloadModule: "fbdev"
[    26.999] (II) Unloading fbdev
[    26.999] (II) UnloadSubModule: "fbdevhw"
[    26.999] (II) Unloading fbdevhw
[    26.999] (II) UnloadModule: "vesa"
[    26.999] (II) Unloading vesa
[    26.999] (--) Depth 24 pixmap format is 32 bpp
[    27.011] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
[    28.487] Loading extension NV-GLX
[    28.515] (==) NVIDIA(0): Disabling shared memory pixmaps
[    28.516] (==) NVIDIA(0): Backing store enabled
[    28.516] (==) NVIDIA(0): Silken mouse enabled
[    28.516] (==) NVIDIA(0): DPMS enabled
[    28.516] Loading extension NV-CONTROL
[    28.517] Loading extension XINERAMA
[    28.517] (II) Loading sub module "dri2"
[    28.517] (II) LoadModule: "dri2"
[    28.517] (II) Module "dri2" already built-in
[    28.517] (II) NVIDIA(0): [DRI2] Setup complete
[    28.517] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    28.517] (--) RandR disabled
[    28.537] (II) SELinux: Disabled on system
[    28.538] (II) Initializing extension GLX
[    28.603] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    28.607] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    28.607] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    28.607] (II) LoadModule: "evdev"
[    28.612] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    28.655] (II) Module evdev: vendor="X.Org Foundation"
[    28.655] compiled for 1.15.0, module version = 2.8.2
[    28.655] Module class: X.Org XInput Driver
[    28.655] ABI class: X.Org XInput driver, version 20.0
[    28.655] (II) Using input driver 'evdev' for 'Power Button'
[    28.655] (**) Power Button: always reports core events
[    28.655] (**) evdev: Power Button: Device: "/dev/input/event2"
[    28.655] (--) evdev: Power Button: Vendor 0 Product 0x1
[    28.655] (--) evdev: Power Button: Found keys
[    28.655] (II) evdev: Power Button: Configuring as keyboard
[    28.655] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    28.655] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    28.655] (**) Option "xkb_rules" "evdev"
[    28.655] (**) Option "xkb_model" "pc105"
[    28.655] (**) Option "xkb_layout" "tr"
[    28.659] (II) XKB: reuse xkmfile /var/lib/xkb/server-609880D4F1521A95A29BCD7AB1227A69EC9A1B72.xkm
[    28.661] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[    28.661] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    28.661] (II) Using input driver 'evdev' for 'Video Bus'
[    28.661] (**) Video Bus: always reports core events
[    28.661] (**) evdev: Video Bus: Device: "/dev/input/event6"
[    28.661] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    28.661] (--) evdev: Video Bus: Found keys
[    28.661] (II) evdev: Video Bus: Configuring as keyboard
[    28.661] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input14/event6"
[    28.661] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    28.661] (**) Option "xkb_rules" "evdev"
[    28.661] (**) Option "xkb_model" "pc105"
[    28.661] (**) Option "xkb_layout" "tr"
[    28.662] (II) config/udev: Adding input device Sony Vaio Keys (/dev/input/event7)
[    28.662] (**) Sony Vaio Keys: Applying InputClass "evdev keyboard catchall"
[    28.662] (II) Using input driver 'evdev' for 'Sony Vaio Keys'
[    28.662] (**) Sony Vaio Keys: always reports core events
[    28.662] (**) evdev: Sony Vaio Keys: Device: "/dev/input/event7"
[    28.662] (--) evdev: Sony Vaio Keys: Vendor 0x104d Product 0
[    28.662] (--) evdev: Sony Vaio Keys: Found keys
[    28.662] (II) evdev: Sony Vaio Keys: Configuring as keyboard
[    28.662] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:16/SNY5001:00/input/input15/event7"
[    28.662] (II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD, id 8)
[    28.662] (**) Option "xkb_rules" "evdev"
[    28.662] (**) Option "xkb_model" "pc105"
[    28.662] (**) Option "xkb_layout" "tr"
[    28.663] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/event8)
[    28.663] (II) No input driver specified, ignoring this device.
[    28.663] (II) This device may have been added with another device file.
[    28.663] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/mouse2)
[    28.663] (II) No input driver specified, ignoring this device.
[    28.663] (II) This device may have been added with another device file.
[    28.663] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    28.663] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    28.663] (II) Using input driver 'evdev' for 'Power Button'
[    28.663] (**) Power Button: always reports core events
[    28.663] (**) evdev: Power Button: Device: "/dev/input/event1"
[    28.663] (--) evdev: Power Button: Vendor 0 Product 0x1
[    28.663] (--) evdev: Power Button: Found keys
[    28.663] (II) evdev: Power Button: Configuring as keyboard
[    28.663] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[    28.663] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[    28.664] (**) Option "xkb_rules" "evdev"
[    28.664] (**) Option "xkb_model" "pc105"
[    28.664] (**) Option "xkb_layout" "tr"
[    28.664] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    28.664] (II) No input driver specified, ignoring this device.
[    28.664] (II) This device may have been added with another device file.
[    28.665] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event10)
[    28.665] (II) No input driver specified, ignoring this device.
[    28.665] (II) This device may have been added with another device file.
[    28.665] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event9)
[    28.665] (II) No input driver specified, ignoring this device.
[    28.665] (II) This device may have been added with another device file.
[    28.665] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    28.665] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    28.665] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    28.665] (**) AT Translated Set 2 keyboard: always reports core events
[    28.665] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[    28.665] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    28.666] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    28.666] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    28.666] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    28.666] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[    28.666] (**) Option "xkb_rules" "evdev"
[    28.666] (**) Option "xkb_model" "pc105"
[    28.666] (**) Option "xkb_layout" "tr"
[    28.666] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event5)
[    28.666] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
[    28.666] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[    28.666] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "Default clickpad buttons"
[    28.666] (II) LoadModule: "synaptics"
[    28.667] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    28.667] (II) Module synaptics: vendor="X.Org Foundation"
[    28.667] compiled for 1.15.0, module version = 1.7.4
[    28.667] Module class: X.Org XInput Driver
[    28.667] ABI class: X.Org XInput driver, version 20.0
[    28.667] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'
[    28.667] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[    28.667] (**) Option "Device" "/dev/input/event5"
[    28.667] (--) synaptics: AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023 (res 0)
[    28.667] (--) synaptics: AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767 (res 0)
[    28.667] (--) synaptics: AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
[    28.667] (II) synaptics: AlpsPS/2 ALPS GlidePoint: device does not report finger width.
[    28.667] (--) synaptics: AlpsPS/2 ALPS GlidePoint: buttons: left right middle
[    28.667] (--) synaptics: AlpsPS/2 ALPS GlidePoint: Vendor 0x2 Product 0x8
[    28.667] (--) synaptics: AlpsPS/2 ALPS GlidePoint: invalid finger width range.  defaulting to 0 - 15
[    28.667] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[    28.667] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[    28.667] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input12/event5"
[    28.667] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD, id 11)
[    28.667] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
[    28.667] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MaxSpeed is now 1.75
[    28.667] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) AccelFactor is now 0.156
[    28.668] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
[    28.668] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
[    28.668] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[    28.668] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[    28.668] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[    28.668] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse1)
[    28.668] (**) AlpsPS/2 ALPS GlidePoint: Ignoring device from InputClass "touchpad ignore duplicates"
[    28.668] (II) config/udev: Adding input device ALPS PS/2 Device (/dev/input/event4)
[    28.668] (**) ALPS PS/2 Device: Applying InputClass "evdev pointer catchall"
[    28.669] (II) Using input driver 'evdev' for 'ALPS PS/2 Device'
[    28.669] (**) ALPS PS/2 Device: always reports core events
[    28.669] (**) evdev: ALPS PS/2 Device: Device: "/dev/input/event4"
[    28.669] (--) evdev: ALPS PS/2 Device: Vendor 0x2 Product 0x8
[    28.669] (--) evdev: ALPS PS/2 Device: Found 3 mouse buttons
[    28.669] (--) evdev: ALPS PS/2 Device: Found relative axes
[    28.669] (--) evdev: ALPS PS/2 Device: Found x and y relative axes
[    28.669] (II) evdev: ALPS PS/2 Device: Configuring as mouse
[    28.669] (**) evdev: ALPS PS/2 Device: YAxisMapping: buttons 4 and 5
[    28.669] (**) evdev: ALPS PS/2 Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    28.669] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input13/event4"
[    28.669] (II) XINPUT: Adding extended input device "ALPS PS/2 Device" (type: MOUSE, id 12)
[    28.669] (II) evdev: ALPS PS/2 Device: initialized for relative axes.
[    28.669] (**) ALPS PS/2 Device: (accel) keeping acceleration scheme 1
[    28.669] (**) ALPS PS/2 Device: (accel) acceleration profile 0
[    28.669] (**) ALPS PS/2 Device: (accel) acceleration factor: 2.000
[    28.669] (**) ALPS PS/2 Device: (accel) acceleration threshold: 4
[    28.670] (II) config/udev: Adding input device ALPS PS/2 Device (/dev/input/mouse0)
[    28.670] (II) No input driver specified, ignoring this device.
[    28.670] (II) This device may have been added with another device file.
[    30.042] (II) NVIDIA(GPU-0): Display (Nvidia Default Flat Panel (DFP-0)) does not support
[    30.042] (II) NVIDIA(GPU-0):     NVIDIA 3D Vision stereo.
[    30.042] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    30.042] (**) NVIDIA(0):     device Nvidia Default Flat Panel (DFP-0) (Using EDID
[    30.042] (**) NVIDIA(0):     frequencies has been enabled on all display devices.)
[    31.232] (II) NVIDIA(GPU-0): Display (Nvidia Default Flat Panel (DFP-0)) does not support
[    31.232] (II) NVIDIA(GPU-0):     NVIDIA 3D Vision stereo.
[    31.232] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    31.232] (**) NVIDIA(0):     device Nvidia Default Flat Panel (DFP-0) (Using EDID
[    31.232] (**) NVIDIA(0):     frequencies has been enabled on all display devices.)
[    31.528] (II) NVIDIA(GPU-0): Display (Nvidia Default Flat Panel (DFP-0)) does not support
[    31.528] (II) NVIDIA(GPU-0):     NVIDIA 3D Vision stereo.
[    31.528] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    31.528] (**) NVIDIA(0):     device Nvidia Default Flat Panel (DFP-0) (Using EDID
[    31.528] (**) NVIDIA(0):     frequencies has been enabled on all display devices.)
[    31.566] (II) XKB: reuse xkmfile /var/lib/xkb/server-62D1EA892EDD20AA61D6DF99513AA97235750F36.xkm
[    31.607] (II) XKB: reuse xkmfile /var/lib/xkb/server-609880D4F1521A95A29BCD7AB1227A69EC9A1B72.xkm
[    31.856] (II) XKB: reuse xkmfile /var/lib/xkb/server-40FFCBA4FB67B27463D8A6E9C263F15C81882480.xkm
[    31.871] (II) XKB: reuse xkmfile /var/lib/xkb/server-40FFCBA4FB67B27463D8A6E9C263F15C81882480.xkm
[    31.884] (II) XKB: reuse xkmfile /var/lib/xkb/server-40FFCBA4FB67B27463D8A6E9C263F15C81882480.xkm
[    32.483] (II) XKB: reuse xkmfile /var/lib/xkb/server-CC1408042868DFC3E36C01F9FEFB9FA17C3810C1.xkm
[    32.497] (II) NVIDIA(GPU-0): Display (Nvidia Default Flat Panel (DFP-0)) does not support
[    32.497] (II) NVIDIA(GPU-0):     NVIDIA 3D Vision stereo.
[    32.497] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    32.497] (**) NVIDIA(0):     device Nvidia Default Flat Panel (DFP-0) (Using EDID
[    32.497] (**) NVIDIA(0):     frequencies has been enabled on all display devices.)
[    32.509] (II) XKB: reuse xkmfile /var/lib/xkb/server-CC1408042868DFC3E36C01F9FEFB9FA17C3810C1.xkm
[    32.519] (II) XKB: reuse xkmfile /var/lib/xkb/server-CC1408042868DFC3E36C01F9FEFB9FA17C3810C1.xkm
[    32.529] (II) XKB: reuse xkmfile /var/lib/xkb/server-CC1408042868DFC3E36C01F9FEFB9FA17C3810C1.xkm
[    33.009] (II) XKB: reuse xkmfile /var/lib/xkb/server-40FFCBA4FB67B27463D8A6E9C263F15C81882480.xkm
[    33.917] (II) XKB: reuse xkmfile /var/lib/xkb/server-CC1408042868DFC3E36C01F9FEFB9FA17C3810C1.xkm
[    34.783] (II) XKB: reuse xkmfile /var/lib/xkb/server-CC1408042868DFC3E36C01F9FEFB9FA17C3810C1.xkm
[  4316.593] (II) NVIDIA(GPU-0): Display (Nvidia Default Flat Panel (DFP-0)) does not support
[  4316.596] (II) NVIDIA(GPU-0):     NVIDIA 3D Vision stereo.
[  4316.596] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[  4316.596] (**) NVIDIA(0):     device Nvidia Default Flat Panel (DFP-0) (Using EDID
[  4316.596] (**) NVIDIA(0):     frequencies has been enabled on all display devices.)
[  4325.020] (II) NVIDIA(GPU-0): Display (Nvidia Default Flat Panel (DFP-0)) does not support
[  4325.020] (II) NVIDIA(GPU-0):     NVIDIA 3D Vision stereo.
[  4325.020] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[  4325.020] (**) NVIDIA(0):     device Nvidia Default Flat Panel (DFP-0) (Using EDID
[  4325.020] (**) NVIDIA(0):     frequencies has been enabled on all display devices.)
[  4326.572] (II) NVIDIA(GPU-0): Display (Nvidia Default Flat Panel (DFP-0)) does not support
[  4326.572] (II) NVIDIA(GPU-0):     NVIDIA 3D Vision stereo.
[  4326.572] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[  4326.572] (**) NVIDIA(0):     device Nvidia Default Flat Panel (DFP-0) (Using EDID
[  4326.572] (**) NVIDIA(0):     frequencies has been enabled on all display devices.)
[  4326.581] (II) NVIDIA(GPU-0): Display (Nvidia Default Flat Panel (DFP-0)) does not support
[  4326.581] (II) NVIDIA(GPU-0):     NVIDIA 3D Vision stereo.
[  4326.581] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[  4326.581] (**) NVIDIA(0):     device Nvidia Default Flat Panel (DFP-0) (Using EDID
[  4326.581] (**) NVIDIA(0):     frequencies has been enabled on all display devices.)
[  4332.785] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[  4332.809] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[  8857.193] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[  8860.978] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 11241.259] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 11241.764] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 11655.295] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 11655.344] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 12736.710] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 12737.343] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 12740.826] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 12741.333] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 12752.751] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 12753.303] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 12909.382] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 12910.653] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 12958.821] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 12959.667] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 13012.089] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 13012.920] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 13160.456] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 13161.232] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 13176.439] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 13177.160] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 13188.977] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 13189.455] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 13231.863] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 13232.696] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 13294.002] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 13294.755] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 14164.383] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 14165.504] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 14167.525] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 14168.174] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 14255.121] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 14259.272] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 14303.158] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 14304.254] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 15824.145] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 15824.791] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 15856.842] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 15857.388] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 15864.287] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 15865.020] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 15902.753] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 15904.591] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 15982.963] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 15983.458] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 16022.528] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 16023.275] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 16025.404] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 16026.481] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 16031.897] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 16045.100] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 16045.583] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 16046.320] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17146.815] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17147.534] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17253.788] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17254.346] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17268.437] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17269.331] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17270.120] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17270.592] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17279.945] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17280.610] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17309.664] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17310.354] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17347.134] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17348.804] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17387.027] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17387.596] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17489.756] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17490.355] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17495.190] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17501.223] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17502.031] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17503.814] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17505.415] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17507.781] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17508.244] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17509.724] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17510.047] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17510.584] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17520.128] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17521.323] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17524.873] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17525.574] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17526.804] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17527.407] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17528.122] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17528.603] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17541.470] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17542.020] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17554.993] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17555.695] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17589.746] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17590.316] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17594.438] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17595.158] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17600.377] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17600.747] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17602.995] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17603.513] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17610.043] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17610.868] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17613.991] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 17614.783] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 20489.233] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 20489.791] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 20499.729] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 20500.215] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 20514.318] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 20514.762] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 20548.310] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 20549.217] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 20554.926] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 20555.598] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 20563.941] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 20564.350] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 20566.111] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 20567.778] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 20580.659] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 20581.404] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 21822.833] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 21823.579] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 21861.322] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 21861.338] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 21861.970] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 21863.230] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 21905.823] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 21906.707] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 21922.463] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 21923.463] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 22059.543] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
[ 22061.137] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF74AAF89E6370A6334565194ACB517946CC4567.xkm
sinan@Sinan-Vaio:~$


dmesg   çıktısı

Kod Seç Genişlet

dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.13.0-41-generic (buildd@akateko) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #70-Ubuntu SMP Tue Nov 25 14:41:08 UTC 2014 (Ubuntu 3.13.0-41.70-generic 3.13.11.11)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] Disabled fast string operations
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003fedffff] usable
[    0.000000] BIOS-e820: [mem 0x000000003fee0000-0x000000003fee9fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000003feea000-0x000000003fefffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000003ff00000-0x000000003fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000f0005fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0008000-0x00000000f000bfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.34 present.
[    0.000000] DMI: Sony Corporation VGN-FS285H, BIOS R0044J1 06/05/2006
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x3fee0 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E3FFF uncachable
[    0.000000]   E4000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 base 03FF00000 mask FFFF00000 uncachable
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] PAT not supported by CPU.
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 1GB, type WB
[    0.000000] reg 1, base: 1023MB, range: 1MB, type UC
[    0.000000] total RAM covered: 1023M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K chunk_size: 2M num_reg: 2  lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 1GB, type WB
[    0.000000] reg 1, base: 1023MB, range: 1MB, type UC
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff]
[    0.000000]  [mem 0x37800000-0x379fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x34000000-0x377fffff]
[    0.000000]  [mem 0x34000000-0x377fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x33ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[    0.000000]  [mem 0x37a00000-0x37bfdfff] page 4k
[    0.000000] BRK [0x01b96000, 0x01b96fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35c24000-0x36e09fff]
[    0.000000] ACPI: RSDP 000f7520 000014 (v00 PTLTD )
[    0.000000] ACPI: RSDT 3fee5890 000044 (v01   Sony       J1 20060605 PTL  00000000)
[    0.000000] ACPI: APIC 3fee9e78 000068 (v01   Sony       J1 20060605 PTL  0000005F)
[    0.000000] ACPI: FACP 3fee9ee0 000084 (v02   Sony       J1 20060605 PTL  0000005F)
[    0.000000] ACPI: DSDT 3fee6325 003B53 (v01   Sony       J1 20060605 PTL  20030224)
[    0.000000] ACPI: FACS 3fefafc0 000040
[    0.000000] ACPI: BOOT 3fee9fd8 000028 (v01   Sony       J1 20060605 PTL  00000001)
[    0.000000] ACPI: MCFG 3fee9f9c 00003C (v01   Sony       J1 20060605 PTL  0000005F)
[    0.000000] ACPI: SSDT 3fee614d 0001D4 (v01   Sony       J1 20060605 PTL  20030224)
[    0.000000] ACPI: SSDT 3fee5d08 000235 (v01   Sony       J1 20060605 PTL  20030224)
[    0.000000] ACPI: SSDT 3fee5aed 00021B (v01   Sony       J1 20060605 PTL  20030224)
[    0.000000] ACPI: SSDT 3fee58d4 000219 (v01   Sony       J1 20060605 PTL  20030224)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 130MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37bfe000
[    0.000000] BRK [0x01b97000, 0x01b97fff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x37bfdfff]
[    0.000000]   HighMem  [mem 0x37bfe000-0x3fedffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x3fedffff]
[    0.000000] On node 0 totalpages: 261758
[    0.000000] free_area_init_node: node 0, pgdat c199d580, node_mem_map f73fe020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 1752 pages used for memmap
[    0.000000]   Normal zone: 224254 pages, LIFO batch:31
[    0.000000]   HighMem zone: 262 pages used for memmap
[    0.000000]   HighMem zone: 33506 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dbfff]
[    0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
[    0.000000] e820: [mem 0x40000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f73db000 s36096 r0 d21248 u57344
[    0.000000] pcpu-alloc: s36096 r0 d21248 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259974
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-41-generic root=UUID=c0ef4fe4-cf5d-4596-be8c-4fbe17cf997f ro quiet splash 8042.nopnp=1 8042.dumbkbd=1
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 2094840 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (00037bfe:0003fee0)
[    0.000000] Memory: 1005580K/1047032K available (6546K kernel code, 640K rwdata, 2764K rodata, 876K init, 924K bss, 41452K reserved, 134024K highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff14000 - 0xfffff000   ( 940 kB)
[    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
[    0.000000]       .init : 0xc19bb000 - 0xc1a96000   ( 876 kB)
[    0.000000]       .data : 0xc1664ef4 - 0xc19ba3c0   (3413 kB)
[    0.000000]       .text : 0xc1000000 - 0xc1664ef4   (6547 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[    0.000000] NR_IRQS:2304 nr_irqs:512 16
[    0.000000] CPU 0 irqstacks, hard=f5808000 soft=f580a000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1729.119 MHz processor
[    0.008003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3458.23 BogoMIPS (lpj=6916476)
[    0.008009] pid_max: default: 32768 minimum: 301
[    0.008063] Security Framework initialized
[    0.008095] AppArmor: AppArmor initialized
[    0.008098] Yama: becoming mindful.
[    0.008209] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.008214] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.008627] Initializing cgroup subsys memory
[    0.008642] Initializing cgroup subsys devices
[    0.008646] Initializing cgroup subsys freezer
[    0.008650] Initializing cgroup subsys blkio
[    0.008654] Initializing cgroup subsys perf_event
[    0.008659] Initializing cgroup subsys hugetlb
[    0.008698] Disabled fast string operations
[    0.008708] mce: CPU supports 5 MCE banks
[    0.008721] CPU0: Thermal monitoring enabled (TM2)
[    0.008739] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
[    0.008739] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8
[    0.008739] tlb_flushall_shift: 6
[    0.027088] ACPI: Core revision 20131115
[    0.031966] ACPI: All ACPI Tables successfully acquired
[    0.032038] ftrace: allocating 27840 entries in 55 pages
[    0.044140] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.044611] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.085786] smpboot: CPU0: Intel(R) Pentium(R) M processor 1.73GHz (fam: 06, model: 0d, stepping: 08)
[    0.088000] Performance Events: p6 PMU driver.
[    0.088000] ... version:                0
[    0.088000] ... bit width:              32
[    0.088000] ... generic registers:      2
[    0.088000] ... value mask:             00000000ffffffff
[    0.088000] ... max period:             000000007fffffff
[    0.088000] ... fixed-purpose events:   0
[    0.088000] ... event mask:             0000000000000003
[    0.088000] x86: Booted up 1 node, 1 CPUs
[    0.088000] smpboot: Total of 1 processors activated (3458.23 BogoMIPS)
[    0.088000] devtmpfs: initialized
[    0.088320] EVM: security.selinux
[    0.088323] EVM: security.SMACK64
[    0.088325] EVM: security.ima
[    0.088327] EVM: security.capability
[    0.088379] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.088518] PM: Registering ACPI NVS region [mem 0x3feea000-0x3fefffff] (90112 bytes)
[    0.090376] pinctrl core: initialized pinctrl subsystem
[    0.090489] regulator-dummy: no parameters
[    0.090533] RTC time: 13:38:33, date: 12/01/14
[    0.090597] NET: Registered protocol family 16
[    0.090864] EISA bus registered
[    0.090868] cpuidle: using governor ladder
[    0.090870] cpuidle: using governor menu
[    0.091006] ACPI: bus type PCI registered
[    0.091010] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.091108] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.091112] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.091114] PCI: Using MMCONFIG for extended config space
[    0.091117] PCI: Using configuration type 1 for base access
[    0.092945] bio: create slab <bio-0> at 0
[    0.093158] ACPI: Added _OSI(Module Device)
[    0.093161] ACPI: Added _OSI(Processor Device)
[    0.093164] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.093167] ACPI: Added _OSI(Processor Aggregator Device)
[    0.200053] ACPI: Interpreter enabled
[    0.200070] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[    0.200077] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[    0.200097] ACPI: (supports S0 S3 S4 S5)
[    0.200099] ACPI: Using IOAPIC for interrupt routing
[    0.200133] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.200290] ACPI: No dock devices found.
[    0.208488] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.208497] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.208506] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.209323] acpi PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.209328] acpi PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.209331] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.209335] acpi PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[    0.209339] acpi PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[    0.209342] acpi PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[    0.209347] acpi PNP0A03:00: host bridge window [mem 0x40000000-0xdfffffff] (ignored)
[    0.209350] PCI: root bus 00: using default resources
[    0.209571] PCI host bridge to bus 0000:00
[    0.209576] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.209580] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.209583] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[    0.209596] pci 0000:00:00.0: [8086:2590] type 00 class 0x060000
[    0.209729] pci 0000:00:01.0: [8086:2591] type 01 class 0x060400
[    0.209777] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.209936] pci 0000:00:1b.0: [8086:2668] type 00 class 0x040300
[    0.209962] pci 0000:00:1b.0: reg 0x10: [mem 0x80000000-0x80003fff 64bit]
[    0.210069] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.210179] pci 0000:00:1d.0: [8086:2658] type 00 class 0x0c0300
[    0.210238] pci 0000:00:1d.0: reg 0x20: [io  0x1800-0x181f]
[    0.210349] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.210403] pci 0000:00:1d.1: [8086:2659] type 00 class 0x0c0300
[    0.210462] pci 0000:00:1d.1: reg 0x20: [io  0x1820-0x183f]
[    0.210565] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.210619] pci 0000:00:1d.2: [8086:265a] type 00 class 0x0c0300
[    0.210678] pci 0000:00:1d.2: reg 0x20: [io  0x1840-0x185f]
[    0.210780] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.210831] pci 0000:00:1d.3: [8086:265b] type 00 class 0x0c0300
[    0.210890] pci 0000:00:1d.3: reg 0x20: [io  0x1860-0x187f]
[    0.210992] pci 0000:00:1d.3: System wakeup disabled by ACPI
[    0.211058] pci 0000:00:1d.7: [8086:265c] type 00 class 0x0c0320
[    0.211084] pci 0000:00:1d.7: reg 0x10: [mem 0x80004000-0x800043ff]
[    0.211193] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.211255] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.211313] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.211482] pci 0000:00:1f.0: [8086:2641] type 00 class 0x060100
[    0.211594] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    0.211606] pci 0000:00:1f.0: address space collision: [io  0x1000-0x107f] conflicts with ACPI CPU throttle [??? 0x00001010-0x00001015 flags 0x80000000]
[    0.211614] pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH6 GPIO
[    0.211719] pci 0000:00:1f.1: [8086:266f] type 00 class 0x01018a
[    0.211738] pci 0000:00:1f.1: reg 0x10: [io  0x0000-0x0007]
[    0.211751] pci 0000:00:1f.1: reg 0x14: [io  0x0000-0x0003]
[    0.211764] pci 0000:00:1f.1: reg 0x18: [io  0x0000-0x0007]
[    0.211778] pci 0000:00:1f.1: reg 0x1c: [io  0x0000-0x0003]
[    0.211791] pci 0000:00:1f.1: reg 0x20: [io  0x1880-0x188f]
[    0.212105] pci 0000:00:1f.3: [8086:266a] type 00 class 0x0c0500
[    0.212181] pci 0000:00:1f.3: reg 0x20: [io  0x18a0-0x18bf]
[    0.212387] pci 0000:01:00.0: [10de:0167] type 00 class 0x030000
[    0.212400] pci 0000:01:00.0: reg 0x10: [mem 0xa0000000-0xa0ffffff]
[    0.212413] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.212425] pci 0000:01:00.0: reg 0x1c: [mem 0x90000000-0x90ffffff 64bit]
[    0.212440] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.212528] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.212537] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.212543] pci 0000:00:01.0:   bridge window [mem 0x90000000-0xafffffff]
[    0.212547] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff pref]
[    0.212667] pci 0000:06:03.0: [104c:ac8e] type 02 class 0x060700
[    0.212696] pci 0000:06:03.0: reg 0x10: [mem 0x00000000-0x00000fff]
[    0.212751] pci 0000:06:03.0: supports D1 D2
[    0.212754] pci 0000:06:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.212848] pci 0000:06:03.2: [104c:802e] type 00 class 0x0c0010
[    0.212881] pci 0000:06:03.2: reg 0x10: [mem 0xb0004000-0xb00047ff]
[    0.212900] pci 0000:06:03.2: reg 0x14: [mem 0xb0000000-0xb0003fff]
[    0.213032] pci 0000:06:03.2: supports D1 D2
[    0.213035] pci 0000:06:03.2: PME# supported from D0 D1 D2 D3hot
[    0.213120] pci 0000:06:03.3: [104c:ac8f] type 00 class 0x018000
[    0.213153] pci 0000:06:03.3: reg 0x10: [mem 0xb0005000-0xb0005fff]
[    0.213298] pci 0000:06:03.3: supports D1 D2
[    0.213302] pci 0000:06:03.3: PME# supported from D0 D1 D2 D3hot
[    0.213399] pci 0000:06:04.0: [8086:4220] type 00 class 0x028000
[    0.213432] pci 0000:06:04.0: reg 0x10: [mem 0xb0006000-0xb0006fff]
[    0.213578] pci 0000:06:04.0: PME# supported from D0 D3hot D3cold
[    0.213677] pci 0000:06:08.0: [8086:1068] type 00 class 0x020000
[    0.213709] pci 0000:06:08.0: reg 0x10: [mem 0xb0007000-0xb0007fff]
[    0.213727] pci 0000:06:08.0: reg 0x14: [io  0x2000-0x203f]
[    0.213854] pci 0000:06:08.0: supports D1 D2
[    0.213857] pci 0000:06:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.213891] pci 0000:06:08.0: System wakeup disabled by ACPI
[    0.213987] pci 0000:00:1e.0: PCI bridge to [bus 06-07] (subtractive decode)
[    0.213993] pci 0000:00:1e.0:   bridge window [io  0x2000-0x2fff]
[    0.214000] pci 0000:00:1e.0:   bridge window [mem 0xb0000000-0xb00fffff]
[    0.214009] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.214013] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[    0.214092] pci_bus 0000:07: busn_res: can not insert [bus 07-ff] under [bus 06-07] (conflicts with (null) [bus 06-07])
[    0.214100] pci_bus 0000:07: busn_res: [bus 07-ff] end is updated to 0a
[    0.214104] pci_bus 0000:07: busn_res: can not insert [bus 07-0a] under [bus 06-07] (conflicts with (null) [bus 06-07])
[    0.214111] pci_bus 0000:07: [bus 07-0a] partially hidden behind transparent bridge 0000:06 [bus 06-07]
[    0.214129] pci_bus 0000:00: on NUMA node 0
[    0.214340] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.214435] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 *4 5 6 7 11 12 14 15)
[    0.214527] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[    0.214618] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.214710] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[    0.214802] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.214894] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.214986] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[    0.215354] ACPI: Enabled 2 GPEs in block 00 to 1F
[    0.215366] ACPI: \_SB_.PCI0: notify handler is installed
[    0.215416] Found 1 acpi root devices
[    0.215468] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.215617] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.215621] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.215624] vgaarb: loaded
[    0.215627] vgaarb: bridge control possible 0000:01:00.0
[    0.215978] SCSI subsystem initialized
[    0.216032] libata version 3.00 loaded.
[    0.216074] ACPI: bus type USB registered
[    0.216107] usbcore: registered new interface driver usbfs
[    0.216122] usbcore: registered new interface driver hub
[    0.216155] usbcore: registered new device driver usb
[    0.216313] PCI: Using ACPI for IRQ routing
[    0.226672] PCI: pci_cache_line_size set to 64 bytes
[    0.226742] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    0.226746] e820: reserve RAM buffer [mem 0x3fee0000-0x3fffffff]
[    0.226887] NetLabel: Initializing
[    0.226889] NetLabel:  domain hash size = 128
[    0.226891] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.226910] NetLabel:  unlabeled traffic allowed by default
[    0.227205] hpet clockevent registered
[    0.227211] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.227218] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.227224] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.229067] Switched to clocksource hpet
[    0.239335] AppArmor: AppArmor Filesystem Enabled
[    0.239398] pnp: PnP ACPI init
[    0.239427] ACPI: bus type PNP registered
[    0.240408] pnp 00:00: [dma 4]
[    0.240462] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.240508] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[    0.240621] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.240752] system 00:03: [io  0x0380-0x0383] has been reserved
[    0.240757] system 00:03: [io  0x0800-0x080f] has been reserved
[    0.240762] system 00:03: [io  0x1000-0x107f] could not be reserved
[    0.240766] system 00:03: [io  0x1180-0x11bf] has been reserved
[    0.240774] system 00:03: [io  0x1640-0x164f] has been reserved
[    0.240778] system 00:03: [io  0xfe00-0xfe7f] has been reserved
[    0.240783] system 00:03: [io  0xfe80-0xfeff] has been reserved
[    0.240788] system 00:03: [mem 0xf0008000-0xf000bfff] has been reserved
[    0.240792] system 00:03: [mem 0xf0000000-0xf0003fff] has been reserved
[    0.240796] system 00:03: [mem 0xf0005000-0xf0005fff] has been reserved
[    0.240800] system 00:03: [mem 0xf0004000-0xf0004fff] has been reserved
[    0.240805] system 00:03: [mem 0xe0000000-0xefffffff] has been reserved
[    0.240810] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.240879] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.240939] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.240995] pnp 00:06: Plug and Play ACPI device, IDs SNY9001 PNP0f13 (active)
[    0.241023] pnp: PnP ACPI: found 7 devices
[    0.241025] ACPI: bus type PNP unregistered
[    0.241030] PnPBIOS: Disabled by ACPI PNP
[    0.278066] pci 0000:06:03.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[    0.278074] pci 0000:00:1e.0: bridge window [mem 0x04000000-0x03ffffff pref] to [bus 06-07] add_size 4000000
[    0.278082] pci 0000:00:1f.0: BAR 13: [io  0x1000-0x107f] has bogus alignment
[    0.278088] pci 0000:00:1e.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[    0.278097] pci 0000:00:1e.0: BAR 15: assigned [mem 0x40000000-0x43ffffff pref]
[    0.278103] pci 0000:01:00.0: BAR 6: assigned [mem 0x91000000-0x9101ffff pref]
[    0.278108] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.278114] pci 0000:00:01.0:   bridge window [mem 0x90000000-0xafffffff]
[    0.278119] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff pref]
[    0.278133] pci 0000:06:03.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[    0.278137] pci 0000:06:03.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[    0.278141] pci 0000:06:03.0: res[13]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.278145] pci 0000:06:03.0: res[14]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.278150] pci 0000:06:03.0: BAR 0: assigned [mem 0x44000000-0x44000fff]
[    0.278159] pci 0000:06:03.0: BAR 15: assigned [mem 0x40000000-0x43ffffff pref]
[    0.278164] pci 0000:06:03.0: BAR 16: assigned [mem 0x48000000-0x4bffffff]
[    0.278168] pci 0000:06:03.0: BAR 13: assigned [io  0x2400-0x24ff]
[    0.278172] pci 0000:06:03.0: BAR 14: assigned [io  0x2800-0x28ff]
[    0.278177] pci 0000:06:03.0: CardBus bridge to [bus 07-0a]
[    0.278181] pci 0000:06:03.0:   bridge window [io  0x2400-0x24ff]
[    0.278189] pci 0000:06:03.0:   bridge window [io  0x2800-0x28ff]
[    0.278197] pci 0000:06:03.0:   bridge window [mem 0x40000000-0x43ffffff pref]
[    0.278205] pci 0000:06:03.0:   bridge window [mem 0x48000000-0x4bffffff]
[    0.278213] pci 0000:00:1e.0: PCI bridge to [bus 06-07]
[    0.278217] pci 0000:00:1e.0:   bridge window [io  0x2000-0x2fff]
[    0.278225] pci 0000:00:1e.0:   bridge window [mem 0xb0000000-0xb00fffff]
[    0.278232] pci 0000:00:1e.0:   bridge window [mem 0x40000000-0x43ffffff pref]
[    0.278242] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.278245] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[    0.278249] pci_bus 0000:01: resource 1 [mem 0x90000000-0xafffffff]
[    0.278253] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff pref]
[    0.278256] pci_bus 0000:06: resource 0 [io  0x2000-0x2fff]
[    0.278260] pci_bus 0000:06: resource 1 [mem 0xb0000000-0xb00fffff]
[    0.278263] pci_bus 0000:06: resource 2 [mem 0x40000000-0x43ffffff pref]
[    0.278267] pci_bus 0000:06: resource 4 [io  0x0000-0xffff]
[    0.278270] pci_bus 0000:06: resource 5 [mem 0x00000000-0xffffffff]
[    0.278274] pci_bus 0000:07: resource 0 [io  0x2400-0x24ff]
[    0.278277] pci_bus 0000:07: resource 1 [io  0x2800-0x28ff]
[    0.278281] pci_bus 0000:07: resource 2 [mem 0x40000000-0x43ffffff pref]
[    0.278284] pci_bus 0000:07: resource 3 [mem 0x48000000-0x4bffffff]
[    0.278345] NET: Registered protocol family 2
[    0.278676] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.278710] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.278766] TCP: Hash tables configured (established 8192 bind 8192)
[    0.278806] TCP: reno registered
[    0.278810] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.278828] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.278927] NET: Registered protocol family 1
[    0.280713] pci 0000:01:00.0: Video device with shadowed ROM
[    0.280743] pci 0000:06:08.0: Firmware left e100 interrupts enabled; disabling
[    0.280749] PCI: CLS 64 bytes, default 64
[    0.280834] Trying to unpack rootfs image as initramfs...
[    0.818765] Freeing initrd memory: 18328K (f5c24000 - f6e0a000)
[    0.818992] Simple Boot Flag at 0x36 set to 0x1
[    0.819146] microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20
[    0.819242] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.819246] Scanning for low memory corruption every 60 seconds
[    0.819715] Initialise system trusted keyring
[    0.819796] audit: initializing netlink socket (disabled)
[    0.819819] type=2000 audit(1417441113.816:1): initialized
[    0.853499] bounce pool size: 64 pages
[    0.853524] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.855770] zbud: loaded
[    0.855865] VFS: Disk quotas dquot_6.5.2
[    0.855944] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.856734] fuse init (API version 7.22)
[    0.856863] msgmni has been set to 1738
[    0.856957] Key type big_key registered
[    0.857313] Key type asymmetric registered
[    0.857316] Asymmetric key parser 'x509' registered
[    0.857372] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.857410] io scheduler noop registered
[    0.857413] io scheduler deadline registered (default)
[    0.857458] io scheduler cfq registered
[    0.857842] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.857933] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.857960] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.858044] intel_idle: does not run on family 6 model 13
[    0.858055] ipmi message handler version 39.2
[    0.858696] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.859369] ACPI: AC Adapter [ADP1] (on-line)
[    0.859473] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    0.860106] ACPI: Lid Switch [LID0]
[    0.860171] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.860178] ACPI: Power Button [PWRB]
[    0.860256] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.860260] ACPI: Power Button [PWRF]
[    1.816073] tsc: Refined TSC clocksource calibration: 1729.168 MHz
[    1.864105] tsc: Marking TSC unstable due to TSC halts in idle
[    1.864114] ACPI: acpi_idle registered with cpuidle
[    1.867738] thermal LNXTHERM:00: registered as thermal_zone0
[    1.867742] ACPI: Thermal Zone [THRM] (48 C)
[    1.867778] GHES: HEST is not enabled!
[    1.867910] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.869961] Linux agpgart interface v0.103
[    1.872353] brd: module loaded
[    1.873537] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.873547] ACPI: Battery Slot [BAT0] (battery absent)
[    1.873585] isapnp: Scanning for PnP cards...
[    1.879302] loop: module loaded
[    1.879484] ata_piix 0000:00:1f.1: version 2.13
[    1.880641] scsi0 : ata_piix
[    1.924364] scsi1 : ata_piix
[    1.924421] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14
[    1.924424] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15
[    1.924958] libphy: Fixed MDIO Bus: probed
[    1.925133] tun: Universal TUN/TAP device driver, 1.6
[    1.925135] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.925346] PPP generic driver version 2.4.2
[    1.925405] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.925411] ehci-pci: EHCI PCI platform driver
[    1.925628] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.925638] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.925656] ehci-pci 0000:00:1d.7: debug port 1
[    1.929571] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    1.929609] ata2: port disabled--ignoring
[    1.929643] ehci-pci 0000:00:1d.7: irq 23, io mem 0x80004000
[    1.973295] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    2.016991] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.016995] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.016999] usb usb1: Product: EHCI Host Controller
[    2.017002] usb usb1: Manufacturer: Linux 3.13.0-41-generic ehci_hcd
[    2.017005] usb usb1: SerialNumber: 0000:00:1d.7
[    2.017153] hub 1-0:1.0: USB hub found
[    2.017165] hub 1-0:1.0: 8 ports detected
[    2.017435] ehci-platform: EHCI generic platform driver
[    2.017448] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.017450] ohci-pci: OHCI PCI platform driver
[    2.017465] ohci-platform: OHCI generic platform driver
[    2.017476] uhci_hcd: USB Universal Host Controller Interface driver
[    2.017672] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    2.017680] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.017710] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001800
[    2.017781] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.017785] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.017788] usb usb2: Product: UHCI Host Controller
[    2.017792] usb usb2: Manufacturer: Linux 3.13.0-41-generic uhci_hcd
[    2.017795] usb usb2: SerialNumber: 0000:00:1d.0
[    2.017930] hub 2-0:1.0: USB hub found
[    2.017940] hub 2-0:1.0: 2 ports detected
[    2.018244] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    2.018252] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    2.018293] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
[    2.018357] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    2.018361] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.018364] usb usb3: Product: UHCI Host Controller
[    2.018368] usb usb3: Manufacturer: Linux 3.13.0-41-generic uhci_hcd
[    2.018371] usb usb3: SerialNumber: 0000:00:1d.1
[    2.018504] hub 3-0:1.0: USB hub found
[    2.018514] hub 3-0:1.0: 2 ports detected
[    2.018809] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    2.018817] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    2.018859] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[    2.018922] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    2.018925] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.018929] usb usb4: Product: UHCI Host Controller
[    2.018932] usb usb4: Manufacturer: Linux 3.13.0-41-generic uhci_hcd
[    2.018935] usb usb4: SerialNumber: 0000:00:1d.2
[    2.019068] hub 4-0:1.0: USB hub found
[    2.019078] hub 4-0:1.0: 2 ports detected
[    2.019388] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    2.019396] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    2.019438] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
[    2.019501] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    2.019505] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.019508] usb usb5: Product: UHCI Host Controller
[    2.019511] usb usb5: Manufacturer: Linux 3.13.0-41-generic uhci_hcd
[    2.019514] usb usb5: SerialNumber: 0000:00:1d.3
[    2.019642] hub 5-0:1.0: USB hub found
[    2.019654] hub 5-0:1.0: 2 ports detected
[    2.019863] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.024076] i8042: Detected active multiplexing controller, rev 1.1
[    2.027524] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.027532] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    2.027570] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    2.027606] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    2.027639] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    2.027782] mousedev: PS/2 mouse device common for all mice
[    2.028023] rtc_cmos 00:04: RTC can wake from S4
[    2.028181] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    2.028216] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    2.028331] device-mapper: uevent: version 1.0.3
[    2.028429] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    2.028465] platform eisa.0: Probing EISA bus 0
[    2.028475] platform eisa.0: Cannot allocate resource for EISA slot 1
[    2.028480] platform eisa.0: Cannot allocate resource for EISA slot 2
[    2.028517] platform eisa.0: EISA: Detected 0 cards
[    2.028526] cpufreq-nforce2: No nForce2 chipset.
[    2.028531] ledtrig-cpu: registered to indicate activity on CPUs
[    2.028751] TCP: cubic registered
[    2.028919] NET: Registered protocol family 10
[    2.029227] NET: Registered protocol family 17
[    2.029250] Key type dns_resolver registered
[    2.029483] Using IPI No-Shortcut mode
[    2.029602] Loading compiled-in X.509 certificates
[    2.035702] Loaded X.509 cert 'Magrathea: Glacier signing key: 50c475a20417a4ffb37e725d010e8887a77a8007'
[    2.035722] registered taskstats version 1
[    2.169847] Key type trusted registered
[    2.172353] Key type encrypted registered
[    2.174862] AppArmor: AppArmor sha1 policy hashing enabled
[    2.174867] IMA: No TPM chip found, activating TPM-bypass!
[    2.175183] regulator-dummy: disabling
[    2.175232]   Magic number: 10:71:634
[    2.175357] rtc_cmos 00:04: setting system clock to 2014-12-01 13:38:35 UTC (1417441115)
[    2.175627] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.175629] EDD information not available.
[    2.175697] PM: Hibernation image not present or could not be loaded.
[    2.263098] isapnp: No Plug & Play device found
[    2.265992] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    2.270237] ata1.00: ATA-8: SAMSUNG HM160HC, LQ100-10, max UDMA/100
[    2.270241] ata1.00: 312581808 sectors, multi 16: LBA48
[    2.270249] ata1.01: ATAPI: SONY DVD RW DW-D56A, PFS3, max UDMA/33
[    2.286080] ata1.00: configured for UDMA/100
[    2.300257] ata1.01: configured for UDMA/33
[    2.300756] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HM160HC  LQ10 PQ: 0 ANSI: 5
[    2.300972] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    2.301054] sd 0:0:0:0: [sda] Write Protect is off
[    2.301059] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.301094] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.301349] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.326658]  sda: sda1 sda2 sda3
[    2.326975] scsi 0:0:1:0: CD-ROM            SONY     DVD RW DW-D56A   PFS3 PQ: 0 ANSI: 5
[    2.328610] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    2.328614] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.328782] sr 0:0:1:0: Attached scsi CD-ROM sr0
[    2.328968] sr 0:0:1:0: Attached scsi generic sg1 type 5
[    2.329226] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.329677] Freeing unused kernel memory: 876K (c19bb000 - c1a96000)
[    2.329733] Write protecting the kernel text: 6548k
[    2.329828] Write protecting the kernel read-only data: 2772k
[    2.329830] NX-protecting the kernel data: 5740k
[    2.348213] systemd-udevd[98]: starting version 204
[    2.517145] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    2.517152] e100: Copyright(c) 1999-2006 Intel Corporation
[    2.568793] e100 0000:06:08.0 eth0: addr 0xb0007000, irq 20, MAC addr 00:01:4a:61:c5:9e
[    2.624100] firewire_ohci 0000:06:03.2: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[    3.021554] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    3.124151] firewire_core 0000:06:03.2: created device fw0: GUID 0800460301e65ca1, S400
[    3.511459] input: ALPS PS/2 Device as /devices/platform/i8042/serio4/input/input13
[    3.527148] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input12
[    3.946313] random: nonblocking pool is initialized
[   18.672345] Adding 2928636k swap on /dev/sda1.  Priority:-1 extents:1 across:2928636k FS
[   18.743261] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.949164] systemd-udevd[263]: starting version 204
[   19.190085] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[   19.217457] lp: driver loaded but no devices found
[   19.260037] ppdev: user-space parallel port driver
[   19.466117] ACPI: Video Device [NGFX] (multi-head: yes  rom: no  post: no)
[   19.495496] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input14
[   19.749745] sony_laptop: Sony Notebook Control Driver v0.6
[   19.796569] input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:16/SNY5001:00/input/input15
[   19.799818] input: Sony Vaio Jogdial as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:16/SNY5001:00/input/input16
[   19.888787] systemd-udevd[299]: renamed network interface eth0 to eth2
[   20.232073] Bluetooth: Core ver 2.17
[   20.232417] NET: Registered protocol family 31
[   20.232420] Bluetooth: HCI device and connection manager initialized
[   20.232433] Bluetooth: HCI socket layer initialized
[   20.232437] Bluetooth: L2CAP socket layer initialized
[   20.232443] Bluetooth: SCO socket layer initialized
[   20.258489] type=1400 audit(1417441133.578:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=475 comm="apparmor_parser"
[   20.258503] type=1400 audit(1417441133.578:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=475 comm="apparmor_parser"
[   20.258511] type=1400 audit(1417441133.578:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=475 comm="apparmor_parser"
[   20.259304] type=1400 audit(1417441133.578:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=475 comm="apparmor_parser"
[   20.259313] type=1400 audit(1417441133.578:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=475 comm="apparmor_parser"
[   20.259731] type=1400 audit(1417441133.578:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=475 comm="apparmor_parser"
[   20.319403] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   20.319410] Bluetooth: BNEP filters: protocol multicast
[   20.319424] Bluetooth: BNEP socket layer initialized
[   20.325471] Bluetooth: RFCOMM TTY layer initialized
[   20.325488] Bluetooth: RFCOMM socket layer initialized
[   20.325496] Bluetooth: RFCOMM ver 1.11
[   20.352042] tifm_core: MMC/SD card detected in socket 0:0
[   20.499103] intel_rng: FWH not detected
[   20.619605] type=1400 audit(1417441133.938:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=562 comm="apparmor_parser"
[   20.619620] type=1400 audit(1417441133.938:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=562 comm="apparmor_parser"
[   20.625424] type=1400 audit(1417441133.946:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=562 comm="apparmor_parser"
[   20.647120] nvidia: module license 'NVIDIA' taints kernel.
[   20.647127] Disabling lock debugging due to kernel taint
[   20.795937] yenta_cardbus 0000:06:03.0: enabling device (0000 -> 0003)
[   20.799893] yenta_cardbus 0000:06:03.0: CardBus bridge found [104d:818f]
[   20.799925] yenta_cardbus 0000:06:03.0: Enabling burst memory read transactions
[   20.799933] yenta_cardbus 0000:06:03.0: Using CSCINT to route CSC interrupts to PCI
[   20.799936] yenta_cardbus 0000:06:03.0: Routing CardBus interrupts to PCI
[   20.799944] yenta_cardbus 0000:06:03.0: TI: mfunc 0x01001b22, devctl 0x64
[   20.881770] ACPI Warning: 0x000011b0-0x000011bf SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[   20.881771] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   20.881775] ACPI Warning: 0x00001180-0x000011af SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[   20.881776] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   20.881777] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   20.907377] cfg80211: Calling CRDA to update world regulatory domain
[   20.920905] init: cups main process (567) killed by HUP signal
[   20.920925] init: cups main process ended, respawning
[   20.984758] nvidia: module verification failed: signature and/or  required key missing - tainting kernel
[   21.036862] yenta_cardbus 0000:06:03.0: ISA IRQ mask 0x0cf8, PCI irq 16
[   21.036871] yenta_cardbus 0000:06:03.0: Socket status: 30000006
[   21.036877] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #07 to #0a
[   21.036889] yenta_cardbus 0000:06:03.0: pcmcia: parent PCI bridge window: [io  0x2000-0x2fff]
[   21.036893] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff:
[   21.071604] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[   21.080100] lib80211: common routines for IEEE802.11 drivers
[   21.080108] lib80211_crypt: registered algorithm 'NULL'
[   21.038684]  excluding 0x2000-0x203f 0x23b0-0x23df 0x2400-0x24ff 0x27b0-0x27df 0x2800-0x28ff 0x2bb0-0x2bdf
[   21.124313] NVRM: loading NVIDIA UNIX x86 Kernel Module  304.117  Tue Nov 26 21:36:39 PST 2013
[   21.200691]  0x2fb0-0x2fdf
[   21.200747] yenta_cardbus 0000:06:03.0: pcmcia: parent PCI bridge window: [mem 0xb0000000-0xb00fffff]
[   21.200754] pcmcia_socket pcmcia_socket0: cs: memory probe 0xb0000000-0xb00fffff:
[   21.200758]  excluding 0xb0000000-0xb000ffff
[   21.200774] yenta_cardbus 0000:06:03.0: pcmcia: parent PCI bridge window: [mem 0x40000000-0x43ffffff pref]
[   21.200778] pcmcia_socket pcmcia_socket0: cs: memory probe 0x40000000-0x43ffffff:
[   21.200794]  excluding 0x40000000-0x43ffffff
[   21.206603] libipw: 802.11 data/management/control stack, git-1.1.13
[   21.206609] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[   21.281095] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[   21.281102] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[   21.281392] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[   22.101022] init: failsafe main process (794) killed by TERM signal
[   22.109214] ipw2200: Detected geography ZZD (13 802.11bg channels, 0 802.11a channels)
[   22.571669] cfg80211: World regulatory domain updated:
[   22.571676] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   22.571679] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   22.571682] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   22.571685] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   22.571688] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   22.571690] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   22.579317] systemd-udevd[296]: renamed network interface eth0 to eth3
[   22.598928] snd_hda_intel 0000:00:1b.0: irq 41 for MSI/MSI-X
[   22.635542] autoconfig: line_outs=1 (0x10/0x0/0x0/0x0/0x0) type:line
[   22.635549]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   22.635552]    hp_outs=1 (0xf/0x0/0x0/0x0/0x0)
[   22.635553]    mono: mono_out=0x0
[   22.635555]    inputs:
[   22.635558]      Mic=0x12
[   22.635560] realtek: No valid SSID, checking pincfg 0x411111f0 for NID 0x17
[   22.635562] realtek: Enable default setup for auto mode as fallback
[   22.644686] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[   22.646071]  excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377 0x380-0x387
[   22.647078] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
[   22.647599]  excluding 0x3f0-0x3f7 0x4d0-0x4d7
[   22.688793] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
[   22.689600]  clean.
[   22.689620] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
[   22.690510]  clean.
[   22.690537] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[   22.690542]  excluding 0xc0000-0xc7fff 0xdc000-0xfffff
[   22.690574] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[   22.690590]  excluding 0xa0000000-0xa0ffffff
[   22.690611] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[   22.690629]  clean.
[   22.690647] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[   22.691564]  clean.
[   22.701901] type=1400 audit(1417441136.022:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=979 comm="apparmor_parser"
[   22.733631] autoconfig: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
[   22.733638]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   22.733640]    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   22.733642]    mono: mono_out=0x0
[   22.733644]    inputs:
[   22.736506] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[   22.736915] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[   23.510165] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[   23.513740] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[   23.973090] lib80211_crypt: registered algorithm 'CCMP'
[   24.009064] lib80211_crypt: registered algorithm 'TKIP'
[   24.009392] init: Failed to spawn hybrid-gfx main process: unable to execute: No such file or directory
[   24.310403] init: nvidia-prime main process (1186) terminated with status 127
[   28.448004] [sched_delayed] sched: RT throttling activated
[   28.700613] init: plymouth-upstart-bridge main process ended, respawning
[   28.726510] init: plymouth-upstart-bridge main process (1560) terminated with status 1
[   28.726531] init: plymouth-upstart-bridge main process ended, respawning
[   33.860051] audit_printk_skb: 150 callbacks suppressed
[   33.860058] type=1400 audit(1417441147.178:62): apparmor="DENIED" operation="open" profile="/usr/lib/telepathy/mission-control-5" name="/etc/dconf/profile/gdm" pid=1906 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=116 ouid=0
[   52.017897] type=1400 audit(1417441165.338:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2067 comm="apparmor_parser"
[   52.017913] type=1400 audit(1417441165.338:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2067 comm="apparmor_parser"
[   52.018722] type=1400 audit(1417441165.338:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2067 comm="apparmor_parser"
[ 1544.725759] ipw2200: Firmware error detected.  Restarting.
[ 4337.476396] Bridge firewalling registered
[ 4337.647447] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4337.696154] nf_conntrack version 0.5.0 (16012 buckets, 64048 max)
[ 5579.312917] perf samples too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
sinan@Sinan-Vaio:~$


[heartsmagic]

Canlı CD ile açtığında böyle bir sorun oluyor mu?

[YSinan]

Dvd rom bozuk olduğundan deneyemedim ,Shift bazen çalışıyor bazen çalışmıyor tam çözemedim ama memory stick ışığı kullanmadığım halde sürekli yanıyor

[heartsmagic]

Kod Seç Genişlet

xev
dedikten sonra Shift tuşuna basınca ne görüyorsun ekranda? Bir de şu dosyada neler var:

Kod Seç Genişlet

cat /etc/default/keyboard

[YSinan]

Merhaba

Kod Seç Genişlet

xev

komutuyla sol üst köşede Event Tester da içi boş kare var shift e basınca birşey değişmedi

Kod Seç Genişlet

sinan@Sinan-Vaio:~$ cat /etc/default/keyboard
# Check /usr/share/doc/keyboard-configuration/README.Debian for
# documentation on what to do after having modified this file.

# The following variables describe your keyboard and can have the same
# values as the XkbModel, XkbLayout, XkbVariant and XkbOptions options
# in /etc/X11/xorg.conf.

XKBMODEL="pc105"
XKBLAYOUT="tr"
XKBVARIANT=""
XKBOPTIONS=""

# If you don't want to use the XKB layout on the console, you can
# specify an alternative keymap.  Make sure it will be accessible
# before /usr is mounted.
# KMAP=/etc/console-setup/defkeymap.kmap.gz


[heartsmagic]

xev'i uçbirimden başlat, o kare gibi şeyin içine tıkla bir kere sonra uçbirime dön ve shift tuşuna bas. Bir tepki vermesi lazım sana. xev her hareketi yakalar, bu nedenle o kısmın ne olduğunu not alman lazım. Örnek olması açısından:

Kod Seç Genişlet

KeyRelease event, serial 37, synthetic NO, window 0x4800001,
    root 0x9d, subw 0x4800002, time 5107799, (35,39), root:(760,91),
    state 0x1, keycode 50 (keysym 0xffe1, Shift_L), same_screen YES,
    XLookupString gives 0 bytes:
    XFilterEvent returns: False

Bir bakalım algılıyor mu sende de. Açıkçası bir öneri de getiremiyorum şu haliyle. Türkçe değil de İngilizce yerleşiminde bu sorun var mı? Gerçi bazen çalışıyor bazen çalışmıyor demişsin. O da işimizi zorlaştırıyor açıkçası.

[YSinan]

Merhaba Heartmagic

Kod Seç Genişlet

xev

Her iki shift tuşunu yakaladı 

Kod Seç Genişlet

KeyPress event, serial 34, synthetic NO, window 0x4800001,
    root 0x242, subw 0x0, time 14441620, (-88,412), root:(804,784),
    state 0x0, keycode 50 (keysym 0xffe1, Shift_L), same_screen YES,
    XLookupString gives 0 bytes:
    XmbLookupString gives 0 bytes:
    XFilterEvent returns: False

KeyRelease event, serial 37, synthetic NO, window 0x4800001,
    root 0x242, subw 0x0, time 14441813, (-88,412), root:(804,784),
    state 0x1, keycode 50 (keysym 0xffe1, Shift_L), same_screen YES,
    XLookupString gives 0 bytes:
    XFilterEvent returns: False

KeyPress event, serial 37, synthetic NO, window 0x4800001,
    root 0x242, subw 0x0, time 14443617, (-88,412), root:(804,784),
    state 0x0, keycode 62 (keysym 0xffe2, Shift_R), same_screen YES,
    XLookupString gives 0 bytes:
    XmbLookupString gives 0 bytes:
    XFilterEvent returns: False

KeyRelease event, serial 37, synthetic NO, window 0x4800001,
    root 0x242, subw 0x0, time 14443819, (-88,412), root:(804,784),
    state 0x1, keycode 62 (keysym 0xffe2, Shift_R), same_screen YES,
    XLookupString gives 0 bytes:
    XFilterEvent returns: False

FocusOut event, serial 37, synthetic NO, window 0x4800001,
    mode NotifyNormal, detail NotifyNonlinear

PropertyNotify event, serial 37, synthetic NO, window 0x4800001,
    atom 0x15a (_NET_WM_STATE), time 14452239, state PropertyNewValue

[heartsmagic]

Ne yazık ki aklıma bir şey gelmiyor. Canlı CD'de falan da deneyemediğin için sorun sistemden mi yoksa başka bir şey mi onu da anlayamıyoruz. Ara ara çalışıp, ara ara çalışmaması da bir garip zaten.

[YSinan]

Merhaba

Yardımlarınız için teşekkürler 8 yaşındaki laptopun suyunu biraz fazla sıktım anlaşılan  donanım değişikliğine gitmemde fayda var teşekkürler çok şey öğreniyorum ...