Ubuntu Geç Açılıyor

zeabidin · 01 Aralık 2014 - 12:40:35

Merhabalar.
Asus x201e windows 8.1 önyüklü laptob ım vardı. Çok bir sıkıntı yoktu ama biraz daha hızlı çalışır diye ubuntu 12.04.5 sürümünü kurdum. Çok bir şey değişmedi ama asıl sorun bu değil. Pc kapanırken tak diye kapanmasına rağmen açılırken çok geç açılıyor.

Ekran yanıp sönüyor , arada siyah yazılar geçiyor ama hızlı geçtiği için ne olduğunu göremiyorum. Ekran turuncu oluyor tam açılacakken kararıp ondan sonra açılıyor.

Windows ta çok hızlı açılıyordu.

Yardımcı olabilirseniz çok sevinirim en olmadı xp kuracağım artık.

mendirec · 01 Aralık 2014 - 13:27:27

İnternette bilgisayarın işlemcisi Celeron, ram ise 2 gb gözüküyor. Doğru mu? Eğer bunlar doğru ise Lubuntu 32 bit veya Xubuntu 32 bit kurun.
Lubuntu 32 bit:https://help.ubuntu.com/community/Lubuntu/GetLubuntu/14.04.1
Xubuntu 32 bit:http://xubuntu.org/news/xubuntu-14-04-1-released/

zeabidin · 01 Aralık 2014 - 13:40:46

Evet doğru. Ama bu pc nin dediğim sürümle uyumlu olduğu yazıyordu. O yüzden kurdum. Bir de siste 64 bit yine de 32 bit mi kurmalıyım?

mendirec · 01 Aralık 2014 - 13:42:51

Ram 2 gb olduğu için 32 bit öneriyorum. Ram biraz daha fazla olsa idi 64 bit kurabilirdin. İşlemci de Celeron olunca hafif dağıtım kurman daha iyi olur.

zeabidin · 01 Aralık 2014 - 14:07:06

Alıntı yapılan: MeNDireC - 01 Aralık 2014 - 13:42:51
Ram 2 gb olduğu için 32 bit öneriyorum. Ram biraz daha fazla olsa idi 64 bit kurabilirdin. İşlemci de Celeron olunca hafif dağıtım kurman daha iyi olur.

Peki, teşekkürler.

Xubuntu yu deneyip sonucu yazarım.

heartsmagic · 01 Aralık 2014 - 22:11:18

Bu türde sorunlar için de dmesg komutu çıktısı güzel olur.

Kod Seç

dmesg > dosya
Ardından dosya isimli dosyayı açıp çıktısını buraya kod etiketi içinde geçersin.
Kod etiketi: kodetiketi

zeabidin · 02 Aralık 2014 - 00:28:00

Kod Seç

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.13.0-32-generic (buildd@phianna) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #57~precise1-Ubuntu SMP Tue Jul 15 03:51:20 UTC 2014 (Ubuntu 3.13.0-32.57~precise1-generic 3.13.11.4)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-32-generic.efi.signed root=UUID=1a774551-f0d6-4368-a859-3ac5a2f2f877 ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x0000000078737fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000078738000-0x0000000078d38fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000078d39000-0x0000000078d3bfff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000078d3c000-0x0000000078d52fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000078d53000-0x0000000078d58fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000078d59000-0x0000000078d5afff] usable
[    0.000000] BIOS-e820: [mem 0x0000000078d5b000-0x0000000078d64fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000078d65000-0x0000000078ef8fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000078ef9000-0x0000000078efcfff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000078efd000-0x0000000078f46fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000078f47000-0x0000000078f4dfff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000078f4e000-0x0000000078f4ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000078f50000-0x0000000078f6dfff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000078f6e000-0x0000000078f70fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000078f71000-0x0000000078f72fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000078f73000-0x0000000078f89fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000078f8a000-0x0000000078f8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000078f90000-0x0000000078f97fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000078f98000-0x0000000078f98fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000078f99000-0x0000000078fa7fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000078fa8000-0x0000000078fa8fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000078fa9000-0x0000000078fb3fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000078fb4000-0x0000000078fb8fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000078fb9000-0x0000000078fecfff] usable
[    0.000000] BIOS-e820: [mem 0x0000000078fed000-0x0000000078fedfff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000078fee000-0x0000000078ffdfff] usable
[    0.000000] BIOS-e820: [mem 0x0000000078ffe000-0x0000000079024fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000079025000-0x000000007903afff] usable
[    0.000000] BIOS-e820: [mem 0x000000007903b000-0x000000007903bfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007903c000-0x000000007903cfff] usable
[    0.000000] BIOS-e820: [mem 0x000000007903d000-0x000000007903efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007903f000-0x000000007903ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000079040000-0x0000000079044fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000079045000-0x0000000079059fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007905a000-0x0000000079621fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000079622000-0x00000000798a1fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000798a2000-0x00000000798a6fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000798a7000-0x00000000798a7fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000798a8000-0x00000000798eafff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000798eb000-0x0000000079d00fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000079d01000-0x0000000079ff3fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000079ff4000-0x0000000079ffffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ac00000-0x000000007edfffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001001fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.31 by American Megatrends
[    0.000000] efi:  ACPI=0x79876000  ACPI 2.0=0x79876000  SMBIOS=0x79120298 
[    0.000000] efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x000000000005f000) (0MB)
[    0.000000] efi: mem01: type=4, attr=0xf, range=[0x000000000005f000-0x0000000000060000) (0MB)
[    0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000060000-0x000000000009e000) (0MB)
[    0.000000] efi: mem03: type=0, attr=0xf, range=[0x000000000009e000-0x00000000000a0000) (0MB)
[    0.000000] efi: mem04: type=2, attr=0xf, range=[0x0000000000100000-0x0000000000699000) (5MB)
[    0.000000] efi: mem05: type=7, attr=0xf, range=[0x0000000000699000-0x0000000001000000) (9MB)
[    0.000000] efi: mem06: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001100000) (1MB)
[    0.000000] efi: mem07: type=7, attr=0xf, range=[0x0000000001100000-0x0000000020000000) (495MB)
[    0.000000] efi: mem08: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
[    0.000000] efi: mem09: type=7, attr=0xf, range=[0x0000000020200000-0x0000000035be2000) (345MB)
[    0.000000] efi: mem10: type=2, attr=0xf, range=[0x0000000035be2000-0x0000000035be5000) (0MB)
[    0.000000] efi: mem11: type=7, attr=0xf, range=[0x0000000035be5000-0x0000000035be8000) (0MB)
[    0.000000] efi: mem12: type=2, attr=0xf, range=[0x0000000035be8000-0x0000000036dec000) (18MB)
[    0.000000] efi: mem13: type=7, attr=0xf, range=[0x0000000036dec000-0x0000000040000000) (146MB)
[    0.000000] efi: mem14: type=0, attr=0xf, range=[0x0000000040000000-0x0000000040200000) (2MB)
[    0.000000] efi: mem15: type=7, attr=0xf, range=[0x0000000040200000-0x0000000059380000) (401MB)
[    0.000000] efi: mem16: type=2, attr=0xf, range=[0x0000000059380000-0x0000000076fbc000) (476MB)
[    0.000000] efi: mem17: type=1, attr=0xf, range=[0x0000000076fbc000-0x000000007707e000) (0MB)
[    0.000000] efi: mem18: type=7, attr=0xf, range=[0x000000007707e000-0x0000000077140000) (0MB)
[    0.000000] efi: mem19: type=4, attr=0xf, range=[0x0000000077140000-0x0000000077311000) (1MB)
[    0.000000] efi: mem20: type=7, attr=0xf, range=[0x0000000077311000-0x000000007731b000) (0MB)
[    0.000000] efi: mem21: type=4, attr=0xf, range=[0x000000007731b000-0x0000000077402000) (0MB)
[    0.000000] efi: mem22: type=7, attr=0xf, range=[0x0000000077402000-0x0000000077405000) (0MB)
[    0.000000] efi: mem23: type=4, attr=0xf, range=[0x0000000077405000-0x00000000780be000) (12MB)
[    0.000000] efi: mem24: type=7, attr=0xf, range=[0x00000000780be000-0x0000000078727000) (6MB)
[    0.000000] efi: mem25: type=2, attr=0xf, range=[0x0000000078727000-0x000000007872b000) (0MB)
[    0.000000] efi: mem26: type=3, attr=0xf, range=[0x000000007872b000-0x0000000078738000) (0MB)
[    0.000000] efi: mem27: type=10, attr=0xf, range=[0x0000000078738000-0x0000000078d39000) (6MB)
[    0.000000] efi: mem28: type=5, attr=0x800000000000000f, range=[0x0000000078d39000-0x0000000078d3c000) (0MB)
[    0.000000] efi: mem29: type=3, attr=0xf, range=[0x0000000078d3c000-0x0000000078d53000) (0MB)
[    0.000000] efi: mem30: type=5, attr=0x800000000000000f, range=[0x0000000078d53000-0x0000000078d59000) (0MB)
[    0.000000] efi: mem31: type=3, attr=0xf, range=[0x0000000078d59000-0x0000000078d5b000) (0MB)
[    0.000000] efi: mem32: type=5, attr=0x800000000000000f, range=[0x0000000078d5b000-0x0000000078d65000) (0MB)
[    0.000000] efi: mem33: type=3, attr=0xf, range=[0x0000000078d65000-0x0000000078ef9000) (1MB)
[    0.000000] efi: mem34: type=5, attr=0x800000000000000f, range=[0x0000000078ef9000-0x0000000078efd000) (0MB)
[    0.000000] efi: mem35: type=3, attr=0xf, range=[0x0000000078efd000-0x0000000078f47000) (0MB)
[    0.000000] efi: mem36: type=5, attr=0x800000000000000f, range=[0x0000000078f47000-0x0000000078f4e000) (0MB)
[    0.000000] efi: mem37: type=3, attr=0xf, range=[0x0000000078f4e000-0x0000000078f50000) (0MB)
[    0.000000] efi: mem38: type=6, attr=0x800000000000000f, range=[0x0000000078f50000-0x0000000078f5d000) (0MB)
[    0.000000] efi: mem39: type=5, attr=0x800000000000000f, range=[0x0000000078f5d000-0x0000000078f6e000) (0MB)
[    0.000000] efi: mem40: type=3, attr=0xf, range=[0x0000000078f6e000-0x0000000078f71000) (0MB)
[    0.000000] efi: mem41: type=5, attr=0x800000000000000f, range=[0x0000000078f71000-0x0000000078f73000) (0MB)
[    0.000000] efi: mem42: type=3, attr=0xf, range=[0x0000000078f73000-0x0000000078f8a000) (0MB)
[    0.000000] efi: mem43: type=5, attr=0x800000000000000f, range=[0x0000000078f8a000-0x0000000078f90000) (0MB)
[    0.000000] efi: mem44: type=3, attr=0xf, range=[0x0000000078f90000-0x0000000078f98000) (0MB)
[    0.000000] efi: mem45: type=5, attr=0x800000000000000f, range=[0x0000000078f98000-0x0000000078f99000) (0MB)
[    0.000000] efi: mem46: type=3, attr=0xf, range=[0x0000000078f99000-0x0000000078fa8000) (0MB)
[    0.000000] efi: mem47: type=5, attr=0x800000000000000f, range=[0x0000000078fa8000-0x0000000078fa9000) (0MB)
[    0.000000] efi: mem48: type=3, attr=0xf, range=[0x0000000078fa9000-0x0000000078fb4000) (0MB)
[    0.000000] efi: mem49: type=5, attr=0x800000000000000f, range=[0x0000000078fb4000-0x0000000078fb9000) (0MB)
[    0.000000] efi: mem50: type=3, attr=0xf, range=[0x0000000078fb9000-0x0000000078fed000) (0MB)
[    0.000000] efi: mem51: type=5, attr=0x800000000000000f, range=[0x0000000078fed000-0x0000000078fee000) (0MB)
[    0.000000] efi: mem52: type=3, attr=0xf, range=[0x0000000078fee000-0x0000000078ffe000) (0MB)
[    0.000000] efi: mem53: type=5, attr=0x800000000000000f, range=[0x0000000078ffe000-0x0000000079025000) (0MB)
[    0.000000] efi: mem54: type=3, attr=0xf, range=[0x0000000079025000-0x000000007903b000) (0MB)
[    0.000000] efi: mem55: type=5, attr=0x800000000000000f, range=[0x000000007903b000-0x000000007903c000) (0MB)
[    0.000000] efi: mem56: type=3, attr=0xf, range=[0x000000007903c000-0x000000007903d000) (0MB)
[    0.000000] efi: mem57: type=5, attr=0x800000000000000f, range=[0x000000007903d000-0x000000007903f000) (0MB)
[    0.000000] efi: mem58: type=3, attr=0xf, range=[0x000000007903f000-0x0000000079040000) (0MB)
[    0.000000] efi: mem59: type=5, attr=0x800000000000000f, range=[0x0000000079040000-0x0000000079045000) (0MB)
[    0.000000] efi: mem60: type=3, attr=0xf, range=[0x0000000079045000-0x000000007905a000) (0MB)
[    0.000000] efi: mem61: type=6, attr=0x800000000000000f, range=[0x000000007905a000-0x00000000790db000) (0MB)
[    0.000000] efi: mem62: type=5, attr=0x800000000000000f, range=[0x00000000790db000-0x00000000790f8000) (0MB)
[    0.000000] efi: mem63: type=6, attr=0x800000000000000f, range=[0x00000000790f8000-0x00000000790ff000) (0MB)
[    0.000000] efi: mem64: type=6, attr=0x800000000000000f, range=[0x00000000790ff000-0x0000000079101000) (0MB)
[    0.000000] efi: mem65: type=6, attr=0x800000000000000f, range=[0x0000000079101000-0x0000000079122000) (0MB)
[    0.000000] efi: mem66: type=0, attr=0xf, range=[0x0000000079122000-0x0000000079264000) (1MB)
[    0.000000] efi: mem67: type=0, attr=0xf, range=[0x0000000079264000-0x00000000795b7000) (3MB)
[    0.000000] efi: mem68: type=0, attr=0xf, range=[0x00000000795b7000-0x00000000795bd000) (0MB)
[    0.000000] efi: mem69: type=0, attr=0xf, range=[0x00000000795bd000-0x0000000079622000) (0MB)
[    0.000000] efi: mem70: type=10, attr=0xf, range=[0x0000000079622000-0x00000000796f3000) (0MB)
[    0.000000] efi: mem71: type=10, attr=0xf, range=[0x00000000796f3000-0x000000007988c000) (1MB)
[    0.000000] efi: mem72: type=10, attr=0xf, range=[0x000000007988c000-0x000000007988e000) (0MB)
[    0.000000] efi: mem73: type=10, attr=0xf, range=[0x000000007988e000-0x00000000798a2000) (0MB)
[    0.000000] efi: mem74: type=9, attr=0xf, range=[0x00000000798a2000-0x00000000798a7000) (0MB)
[    0.000000] efi: mem75: type=4, attr=0xf, range=[0x00000000798a7000-0x00000000798a8000) (0MB)
[    0.000000] efi: mem76: type=10, attr=0xf, range=[0x00000000798a8000-0x00000000798eb000) (0MB)
[    0.000000] efi: mem77: type=4, attr=0xf, range=[0x00000000798eb000-0x0000000079a38000) (1MB)
[    0.000000] efi: mem78: type=3, attr=0xf, range=[0x0000000079a38000-0x0000000079cd2000) (2MB)
[    0.000000] efi: mem79: type=4, attr=0xf, range=[0x0000000079cd2000-0x0000000079cd7000) (0MB)
[    0.000000] efi: mem80: type=3, attr=0xf, range=[0x0000000079cd7000-0x0000000079cdb000) (0MB)
[    0.000000] efi: mem81: type=4, attr=0xf, range=[0x0000000079cdb000-0x0000000079ce8000) (0MB)
[    0.000000] efi: mem82: type=3, attr=0xf, range=[0x0000000079ce8000-0x0000000079cfa000) (0MB)
[    0.000000] efi: mem83: type=4, attr=0xf, range=[0x0000000079cfa000-0x0000000079d01000) (0MB)
[    0.000000] efi: mem84: type=6, attr=0x800000000000000f, range=[0x0000000079d01000-0x0000000079ff4000) (2MB)
[    0.000000] efi: mem85: type=4, attr=0xf, range=[0x0000000079ff4000-0x000000007a000000) (0MB)
[    0.000000] efi: mem86: type=7, attr=0xf, range=[0x0000000100000000-0x0000000100200000) (2MB)
[    0.000000] efi: mem87: type=0, attr=0x8000000000000000, range=[0x000000007ac00000-0x000000007ee00000) (66MB)
[    0.000000] efi: mem88: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB)
[    0.000000] efi: mem89: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[    0.000000] efi: mem90: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed04000) (0MB)
[    0.000000] efi: mem91: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[    0.000000] efi: mem92: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[    0.000000] efi: mem93: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ASUSTeK COMPUTER INC. X201EP/X201EP, BIOS X201EP.202 10/03/2012
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x100200 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F00000000 write-back
[    0.000000]   1 base 100000000 mask FFFE00000 write-back
[    0.000000]   2 base 080000000 mask F80000000 uncachable
[    0.000000]   3 base 07C000000 mask FFC000000 uncachable
[    0.000000]   4 base 07B000000 mask FFF000000 uncachable
[    0.000000]   5 base 07AC00000 mask FFFC00000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 4GB, type WB
[    0.000000] reg 1, base: 4GB, range: 2MB, type WB
[    0.000000] reg 2, base: 2GB, range: 2GB, type UC
[    0.000000] reg 3, base: 1984MB, range: 64MB, type UC
[    0.000000] reg 4, base: 1968MB, range: 16MB, type UC
[    0.000000] reg 5, base: 1964MB, range: 4MB, type UC
[    0.000000] total RAM covered: 1966M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 128M 	num_reg: 5  	lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 1964MB, range: 4MB, type UC
[    0.000000] reg 2, base: 1968MB, range: 16MB, type UC
[    0.000000] reg 3, base: 1984MB, range: 64MB, type UC
[    0.000000] reg 4, base: 4GB, range: 2MB, type WB
[    0.000000] e820: update [mem 0x7ac00000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0x7a000 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE
[    0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE
[    0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x100000000-0x1001fffff]
[    0.000000]  [mem 0x100000000-0x1001fffff] page 2M
[    0.000000] BRK [0x01fe6000, 0x01fe6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x78000000-0x78737fff]
[    0.000000]  [mem 0x78000000-0x785fffff] page 2M
[    0.000000]  [mem 0x78600000-0x78737fff] page 4k
[    0.000000] BRK [0x01fe7000, 0x01fe7fff] PGTABLE
[    0.000000] BRK [0x01fe8000, 0x01fe8fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x78d3c000-0x78d52fff]
[    0.000000]  [mem 0x78d3c000-0x78d52fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x78d59000-0x78d5afff]
[    0.000000]  [mem 0x78d59000-0x78d5afff] page 4k
[    0.000000] init_memory_mapping: [mem 0x78d65000-0x78ef8fff]
[    0.000000]  [mem 0x78d65000-0x78ef8fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x78efd000-0x78f46fff]
[    0.000000]  [mem 0x78efd000-0x78f46fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x78f4e000-0x78f4ffff]
[    0.000000]  [mem 0x78f4e000-0x78f4ffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x78f6e000-0x78f70fff]
[    0.000000]  [mem 0x78f6e000-0x78f70fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x78f73000-0x78f89fff]
[    0.000000]  [mem 0x78f73000-0x78f89fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x78f90000-0x78f97fff]
[    0.000000]  [mem 0x78f90000-0x78f97fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x78f99000-0x78fa7fff]
[    0.000000]  [mem 0x78f99000-0x78fa7fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x78fa9000-0x78fb3fff]
[    0.000000]  [mem 0x78fa9000-0x78fb3fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x78fb9000-0x78fecfff]
[    0.000000]  [mem 0x78fb9000-0x78fecfff] page 4k
[    0.000000] init_memory_mapping: [mem 0x78fee000-0x78ffdfff]
[    0.000000]  [mem 0x78fee000-0x78ffdfff] page 4k
[    0.000000] init_memory_mapping: [mem 0x79025000-0x7903afff]
[    0.000000]  [mem 0x79025000-0x7903afff] page 4k
[    0.000000] init_memory_mapping: [mem 0x7903c000-0x7903cfff]
[    0.000000]  [mem 0x7903c000-0x7903cfff] page 4k
[    0.000000] init_memory_mapping: [mem 0x7903f000-0x7903ffff]
[    0.000000]  [mem 0x7903f000-0x7903ffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x79045000-0x79059fff]
[    0.000000]  [mem 0x79045000-0x79059fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x798a7000-0x798a7fff]
[    0.000000]  [mem 0x798a7000-0x798a7fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x798eb000-0x79d00fff]
[    0.000000]  [mem 0x798eb000-0x799fffff] page 4k
[    0.000000]  [mem 0x79a00000-0x79bfffff] page 2M
[    0.000000]  [mem 0x79c00000-0x79d00fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x79ff4000-0x79ffffff]
[    0.000000]  [mem 0x79ff4000-0x79ffffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
[    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x40200000-0x77ffffff]
[    0.000000]  [mem 0x40200000-0x77ffffff] page 2M
[    0.000000] RAMDISK: [mem 0x35be8000-0x36debfff]
[    0.000000] ACPI: RSDP 0000000079876000 000024 (v02 _ASUS_)
[    0.000000] ACPI: XSDT 0000000079876080 000084 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0000000079887f38 00010C (v05 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0000000079876190 011DA6 (v02 _ASUS_ Notebook 00000013 INTL 20091112)
[    0.000000] ACPI: FACS 000000007989f080 000040
[    0.000000] ACPI: APIC 0000000079888048 000062 (v03 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 00000000798880b0 000044 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: ECDT 00000000798880f8 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[    0.000000] ACPI: MCFG 00000000798881c0 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0000000079888200 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0000000079888238 0004A0 (v01 AhciR1 AhciTab1 00001000 INTL 20091112)
[    0.000000] ACPI: SSDT 00000000798886d8 00049E (v01 AhciR2 AhciTab2 00001000 INTL 20091112)
[    0.000000] ACPI: SSDT 0000000079888b78 0006B8 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0000000079889230 000A92 (v01  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: BGRT 0000000079889cc8 000038 (v00 _ASUS_ Notebook 01072009 ASUS 00010013)
[    0.000000] ACPI: MSDM 0000000079621e18 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000001001fffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x1001fffff]
[    0.000000]   NODE_DATA [mem 0x1001f5000-0x1001f9fff]
[    0.000000]  [ffffea0000000000-ffffea00041fffff] PMD -> [ffff880074a00000-ffff880076bfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x1001fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009dfff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x3fffffff]
[    0.000000]   node   0: [mem 0x40200000-0x78737fff]
[    0.000000]   node   0: [mem 0x78d3c000-0x78d52fff]
[    0.000000]   node   0: [mem 0x78d59000-0x78d5afff]
[    0.000000]   node   0: [mem 0x78d65000-0x78ef8fff]
[    0.000000]   node   0: [mem 0x78efd000-0x78f46fff]
[    0.000000]   node   0: [mem 0x78f4e000-0x78f4ffff]
[    0.000000]   node   0: [mem 0x78f6e000-0x78f70fff]
[    0.000000]   node   0: [mem 0x78f73000-0x78f89fff]
[    0.000000]   node   0: [mem 0x78f90000-0x78f97fff]
[    0.000000]   node   0: [mem 0x78f99000-0x78fa7fff]
[    0.000000]   node   0: [mem 0x78fa9000-0x78fb3fff]
[    0.000000]   node   0: [mem 0x78fb9000-0x78fecfff]
[    0.000000]   node   0: [mem 0x78fee000-0x78ffdfff]
[    0.000000]   node   0: [mem 0x79025000-0x7903afff]
[    0.000000]   node   0: [mem 0x7903c000-0x7903cfff]
[    0.000000]   node   0: [mem 0x7903f000-0x7903ffff]
[    0.000000]   node   0: [mem 0x79045000-0x79059fff]
[    0.000000]   node   0: [mem 0x798a7000-0x798a7fff]
[    0.000000]   node   0: [mem 0x798eb000-0x79d00fff]
[    0.000000]   node   0: [mem 0x79ff4000-0x79ffffff]
[    0.000000]   node   0: [mem 0x100000000-0x1001fffff]
[    0.000000] On node 0 totalpages: 494494
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 157 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7657 pages used for memmap
[    0.000000]   DMA32 zone: 489985 pages, LIFO batch:31
[    0.000000]   Normal zone: 8 pages used for memmap
[    0.000000]   Normal zone: 512 pages, LIFO batch:0
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x78738000-0x78d38fff]
[    0.000000] PM: Registered nosave memory: [mem 0x78d39000-0x78d3bfff]
[    0.000000] PM: Registered nosave memory: [mem 0x78d53000-0x78d58fff]
[    0.000000] PM: Registered nosave memory: [mem 0x78d5b000-0x78d64fff]
[    0.000000] PM: Registered nosave memory: [mem 0x78ef9000-0x78efcfff]
[    0.000000] PM: Registered nosave memory: [mem 0x78f47000-0x78f4dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x78f50000-0x78f6dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x78f71000-0x78f72fff]
[    0.000000] PM: Registered nosave memory: [mem 0x78f8a000-0x78f8ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x78f98000-0x78f98fff]
[    0.000000] PM: Registered nosave memory: [mem 0x78fa8000-0x78fa8fff]
[    0.000000] PM: Registered nosave memory: [mem 0x78fb4000-0x78fb8fff]
[    0.000000] PM: Registered nosave memory: [mem 0x78fed000-0x78fedfff]
[    0.000000] PM: Registered nosave memory: [mem 0x78ffe000-0x79024fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7903b000-0x7903bfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7903d000-0x7903efff]
[    0.000000] PM: Registered nosave memory: [mem 0x79040000-0x79044fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7905a000-0x79621fff]
[    0.000000] PM: Registered nosave memory: [mem 0x79622000-0x798a1fff]
[    0.000000] PM: Registered nosave memory: [mem 0x798a2000-0x798a6fff]
[    0.000000] PM: Registered nosave memory: [mem 0x798a8000-0x798eafff]
[    0.000000] PM: Registered nosave memory: [mem 0x79d01000-0x79ff3fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7a000000-0x7abfffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7ac00000-0x7edfffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7ee00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0x7ee00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff880078400000 s86336 r8192 d24256 u1048576
[    0.000000] pcpu-alloc: s86336 r8192 d24256 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 486608
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-32-generic.efi.signed root=UUID=1a774551-f0d6-4368-a859-3ac5a2f2f877 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 1818388K/1977976K available (7602K kernel code, 1137K rwdata, 3484K rodata, 1356K init, 1440K bss, 159588K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[    0.000000] 	Offload RCU callbacks from all CPUs
[    0.000000] 	Offload RCU callbacks from CPUs: 0-1.
[    0.000000] NR_IRQS:16640 nr_irqs:512 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 8912896 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 1097.506 MHz processor
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 2195.01 BogoMIPS (lpj=4390024)
[    0.000009] pid_max: default: 32768 minimum: 301
[    0.001193] Security Framework initialized
[    0.001220] AppArmor: AppArmor initialized
[    0.001222] Yama: becoming mindful.
[    0.001645] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.002616] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.003015] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.003024] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.003364] Initializing cgroup subsys memory
[    0.003375] Initializing cgroup subsys devices
[    0.003378] Initializing cgroup subsys freezer
[    0.003380] Initializing cgroup subsys blkio
[    0.003383] Initializing cgroup subsys perf_event
[    0.003387] Initializing cgroup subsys hugetlb
[    0.003429] CPU: Physical Processor ID: 0
[    0.003431] CPU: Processor Core ID: 0
[    0.003439] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.003439] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.003445] mce: CPU supports 7 MCE banks
[    0.003467] CPU0: Thermal monitoring enabled (TM1)
[    0.003483] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[    0.003483] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[    0.003483] tlb_flushall_shift: 5
[    0.003694] Freeing SMP alternatives memory: 32K (ffffffff81e71000 - ffffffff81e79000)
[    0.006870] ACPI: Core revision 20131115
[    0.026632] ACPI: All ACPI Tables successfully acquired
[    0.029319] ftrace: allocating 31443 entries in 123 pages
[    0.062487] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.102176] smpboot: CPU0: Intel(R) Celeron(R) CPU 847 @ 1.10GHz (fam: 06, model: 2a, stepping: 07)
[    0.102191] TSC deadline timer enabled
[    0.102209] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[    0.102224] ... version:                3
[    0.102227] ... bit width:              48
[    0.102229] ... generic registers:      8
[    0.102231] ... value mask:             0000ffffffffffff
[    0.102234] ... max period:             0000ffffffffffff
[    0.102236] ... fixed-purpose events:   3
[    0.102238] ... event mask:             00000007000000ff
[    0.105340] x86: Booting SMP configuration:
[    0.105345] .... node  #0, CPUs:      #1
[    0.118454] x86: Booted up 1 node, 2 CPUs
[    0.118460] smpboot: Total of 2 processors activated (4390.02 BogoMIPS)
[    0.118563] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.121156] devtmpfs: initialized
[    0.130811] EVM: security.selinux
[    0.130814] EVM: security.SMACK64
[    0.130816] EVM: security.ima
[    0.130819] EVM: security.capability
[    0.130919] PM: Registering ACPI NVS region [mem 0x78738000-0x78d38fff] (6295552 bytes)
[    0.131103] PM: Registering ACPI NVS region [mem 0x79622000-0x798a1fff] (2621440 bytes)
[    0.131178] PM: Registering ACPI NVS region [mem 0x798a8000-0x798eafff] (274432 bytes)
[    0.132801] pinctrl core: initialized pinctrl subsystem
[    0.132924] regulator-dummy: no parameters
[    0.132970] RTC time: 22:23:10, date: 12/01/14
[    0.133043] NET: Registered protocol family 16
[    0.133241] cpuidle: using governor ladder
[    0.133244] cpuidle: using governor menu
[    0.133323] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.133327] ACPI: bus type PCI registered
[    0.133330] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.133428] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.133433] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.168097] PCI: Using configuration type 1 for base access
[    0.169793] bio: create slab <bio-0> at 0
[    0.170070] ACPI: Added _OSI(Module Device)
[    0.170074] ACPI: Added _OSI(Processor Device)
[    0.170077] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.170079] ACPI: Added _OSI(Processor Aggregator Device)
[    0.174489] ACPI : EC: EC description table is found, configuring boot EC
[    0.179204] ACPI: Executed 1 blocks of module-level executable AML code
[    0.190824] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.191646] ACPI: SSDT 00000000795cf018 000853 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.192755] ACPI: Dynamic OEM Table Load:
[    0.192759] ACPI: SSDT           (null) 000853 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.194974] ACPI: SSDT 00000000795d0a98 000303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.196151] ACPI: Dynamic OEM Table Load:
[    0.196155] ACPI: SSDT           (null) 000303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.198702] ACPI: SSDT 00000000795d1c18 000119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.199806] ACPI: Dynamic OEM Table Load:
[    0.199810] ACPI: SSDT           (null) 000119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.203081] ACPI: Interpreter enabled
[    0.203095] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[    0.203106] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[    0.203138] ACPI: (supports S0 S3 S4 S5)
[    0.203141] ACPI: Using IOAPIC for interrupt routing
[    0.203194] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.203526] ACPI: No dock devices found.
[    0.222100] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.222114] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.222614] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[    0.222914] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[    0.224174] PCI host bridge to bus 0000:00
[    0.224181] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.224186] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.224190] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.224194] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.224197] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[    0.224201] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[    0.224204] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[    0.224208] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[    0.224211] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    0.224215] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.224218] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.224222] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    0.224226] pci_bus 0000:00: root bus resource [mem 0x7ee00000-0xfeafffff]
[    0.224242] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.224434] pci 0000:00:02.0: [8086:0106] type 00 class 0x030000
[    0.224458] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[    0.224471] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.224481] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.224710] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.224754] pci 0000:00:14.0: reg 0x10: [mem 0xf7e00000-0xf7e0ffff 64bit]
[    0.224894] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.225008] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.225074] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.225118] pci 0000:00:16.0: reg 0x10: [mem 0xf7e1a000-0xf7e1a00f 64bit]
[    0.225258] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.225439] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.225479] pci 0000:00:1a.0: reg 0x10: [mem 0xf7e18000-0xf7e183ff]
[    0.225644] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.225760] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.225829] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.225862] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e10000-0xf7e13fff 64bit]
[    0.226009] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.226124] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.226184] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.226337] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.226459] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.226527] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[    0.226684] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.226800] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.226863] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
[    0.227017] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.227137] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.227212] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.227251] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e17000-0xf7e173ff]
[    0.227418] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.227532] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.227596] pci 0000:00:1f.0: [8086:1e5e] type 00 class 0x060100
[    0.227929] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.227971] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.227989] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.228008] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[    0.228026] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[    0.228044] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.228061] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e16000-0xf7e167ff]
[    0.228169] pci 0000:00:1f.2: PME# supported from D3hot
[    0.228334] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.228368] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e15000-0xf7e150ff 64bit]
[    0.228414] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.228691] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.228902] pci 0000:02:00.0: [168c:0032] type 00 class 0x028000
[    0.228966] pci 0000:02:00.0: reg 0x10: [mem 0xf7d00000-0xf7d7ffff 64bit]
[    0.229122] pci 0000:02:00.0: reg 0x30: [mem 0xf7d80000-0xf7d8ffff pref]
[    0.229287] pci 0000:02:00.0: supports D1 D2
[    0.229291] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.229369] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.234570] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.234585] pci 0000:00:1c.1:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    0.234833] pci 0000:03:00.0: [1969:1090] type 00 class 0x020000
[    0.234946] pci 0000:03:00.0: reg 0x10: [mem 0xf7c00000-0xf7c3ffff 64bit]
[    0.235003] pci 0000:03:00.0: reg 0x18: [io  0xe000-0xe07f]
[    0.235532] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.235657] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.242594] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.242605] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
[    0.242615] pci 0000:00:1c.3:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.242691] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[    0.244010] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
[    0.244115] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[    0.244215] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[    0.244312] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[    0.244409] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[    0.244506] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[    0.244608] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[    0.244706] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[    0.245418] ACPI: Enabled 3 GPEs in block 00 to 3F
[    0.245432] ACPI: \_SB_.PCI0: notify handler is installed
[    0.245558] Found 1 acpi root devices
[    0.245701] ACPI : EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[    0.245895] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.245902] vgaarb: loaded
[    0.245904] vgaarb: bridge control possible 0000:00:02.0
[    0.246208] SCSI subsystem initialized
[    0.246299] libata version 3.00 loaded.
[    0.246348] ACPI: bus type USB registered
[    0.246377] usbcore: registered new interface driver usbfs
[    0.246391] usbcore: registered new interface driver hub
[    0.246441] usbcore: registered new device driver usb
[    0.246640] PCI: Using ACPI for IRQ routing
[    0.250314] PCI: pci_cache_line_size set to 64 bytes
[    0.250402] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.250406] e820: reserve RAM buffer [mem 0x78738000-0x7bffffff]
[    0.250420] e820: reserve RAM buffer [mem 0x78d53000-0x7bffffff]
[    0.250433] e820: reserve RAM buffer [mem 0x78d5b000-0x7bffffff]
[    0.250446] e820: reserve RAM buffer [mem 0x78ef9000-0x7bffffff]
[    0.250458] e820: reserve RAM buffer [mem 0x78f47000-0x7bffffff]
[    0.250470] e820: reserve RAM buffer [mem 0x78f50000-0x7bffffff]
[    0.250482] e820: reserve RAM buffer [mem 0x78f71000-0x7bffffff]
[    0.250493] e820: reserve RAM buffer [mem 0x78f8a000-0x7bffffff]
[    0.250504] e820: reserve RAM buffer [mem 0x78f98000-0x7bffffff]
[    0.250514] e820: reserve RAM buffer [mem 0x78fa8000-0x7bffffff]
[    0.250524] e820: reserve RAM buffer [mem 0x78fb4000-0x7bffffff]
[    0.250533] e820: reserve RAM buffer [mem 0x78fed000-0x7bffffff]
[    0.250549] e820: reserve RAM buffer [mem 0x78ffe000-0x7bffffff]
[    0.250558] e820: reserve RAM buffer [mem 0x7903b000-0x7bffffff]
[    0.250566] e820: reserve RAM buffer [mem 0x7903d000-0x7bffffff]
[    0.250573] e820: reserve RAM buffer [mem 0x79040000-0x7bffffff]
[    0.250580] e820: reserve RAM buffer [mem 0x7905a000-0x7bffffff]
[    0.250586] e820: reserve RAM buffer [mem 0x798a8000-0x7bffffff]
[    0.250590] e820: reserve RAM buffer [mem 0x79d01000-0x7bffffff]
[    0.250594] e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff]
[    0.250598] e820: reserve RAM buffer [mem 0x100200000-0x103ffffff]
[    0.250751] NetLabel: Initializing
[    0.250754] NetLabel:  domain hash size = 128
[    0.250755] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.250781] NetLabel:  unlabeled traffic allowed by default
[    0.250891] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.250903] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.252957] Switched to clocksource hpet
[    0.261887] AppArmor: AppArmor Filesystem Enabled
[    0.261931] pnp: PnP ACPI init
[    0.261956] ACPI: bus type PNP registered
[    0.262118] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.262126] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.262268] pnp 00:01: [dma 4]
[    0.262308] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.262350] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    0.262548] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.262630] system 00:04: [io  0x0680-0x069f] has been reserved
[    0.262635] system 00:04: [io  0x1000-0x100f] has been reserved
[    0.262639] system 00:04: [io  0xffff] has been reserved
[    0.262643] system 00:04: [io  0xffff] has been reserved
[    0.262648] system 00:04: [io  0x0400-0x0453] could not be reserved
[    0.262652] system 00:04: [io  0x0458-0x047f] has been reserved
[    0.262656] system 00:04: [io  0x0500-0x057f] has been reserved
[    0.262660] system 00:04: [io  0x164e-0x164f] has been reserved
[    0.262666] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.262723] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.262821] system 00:06: [io  0x0454-0x0457] has been reserved
[    0.262827] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.262926] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    0.262932] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.262986] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.263049] system 00:09: [io  0x0240-0x0259] has been reserved
[    0.263054] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.263176] pnp 00:0a: Plug and Play ACPI device, IDs ETD0108 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[    0.263255] pnp 00:0b: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[    0.263612] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.263618] system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.263622] system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.263626] system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.263631] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.263635] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.263640] system 00:0c: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.263644] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.263648] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
[    0.263653] system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.263657] system 00:0c: [mem 0x7ee00000-0x7ee00fff] has been reserved
[    0.263663] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.263832] system 00:0d: [mem 0x7ee00000-0x7ee00fff] has been reserved
[    0.263838] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.264123] system 00:0e: [mem 0x20000000-0x201fffff] has been reserved
[    0.264128] system 00:0e: [mem 0x40000000-0x401fffff] has been reserved
[    0.264133] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.264204] pnp: PnP ACPI: found 15 devices
[    0.264207] ACPI: bus type PNP unregistered
[    0.271987] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.272012] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.272023] pci 0000:00:1c.1:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    0.272039] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.272045] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
[    0.272055] pci 0000:00:1c.3:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.272073] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.272077] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.272080] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.272084] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.272088] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.272091] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.272095] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[    0.272098] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[    0.272102] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[    0.272105] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[    0.272109] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[    0.272112] pci_bus 0000:00: resource 15 [mem 0x7ee00000-0xfeafffff]
[    0.272117] pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff]
[    0.272121] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.272124] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff]
[    0.272177] NET: Registered protocol family 2
[    0.272440] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.272534] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.272596] TCP: Hash tables configured (established 16384 bind 16384)
[    0.272632] TCP: reno registered
[    0.272643] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.272663] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.272755] NET: Registered protocol family 1
[    0.272780] pci 0000:00:02.0: Boot video device
[    0.313173] pci 0000:03:00.0: set MSI_INTX_DISABLE_BUG flag
[    0.313182] PCI: CLS 64 bytes, default 64
[    0.313285] Trying to unpack rootfs image as initramfs...
[    0.945418] Freeing initrd memory: 18448K (ffff880035be8000 - ffff880036dec000)
[    0.945427] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.945432] software IO TLB [mem 0x70a00000-0x74a00000] (64MB) mapped at [ffff880070a00000-ffff8800749fffff]
[    0.945804] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28
[    0.945812] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28
[    0.945903] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.945906] Scanning for low memory corruption every 60 seconds
[    0.946274] Initialise system trusted keyring
[    0.946359] audit: initializing netlink socket (disabled)
[    0.946376] type=2000 audit(1417472590.936:1): initialized
[    1.006897] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.008897] zbud: loaded
[    1.009185] VFS: Disk quotas dquot_6.5.2
[    1.009264] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.010071] fuse init (API version 7.22)
[    1.010209] msgmni has been set to 3632
[    1.010311] Key type big_key registered
[    1.010873] Key type asymmetric registered
[    1.010876] Asymmetric key parser 'x509' registered
[    1.010935] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.010982] io scheduler noop registered
[    1.010986] io scheduler deadline registered (default)
[    1.011029] io scheduler cfq registered
[    1.011878] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.011904] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.011979] efifb: probing for efifb
[    1.014340] efifb: framebuffer at 0xe0000000, mapped to 0xffffc90004400000, using 4160k, total 4160k
[    1.014344] efifb: mode is 1366x768x32, linelength=5504, pages=1
[    1.014345] efifb: scrolling: redraw
[    1.014349] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.019174] Console: switching to colour frame buffer device 170x48
[    1.023714] fb0: EFI VGA frame buffer device
[    1.023747] intel_idle: MWAIT substates: 0x21120
[    1.023750] intel_idle: v0.4 model 0x2A
[    1.023752] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.023876] ipmi message handler version 39.2
[    1.029095] ACPI: AC Adapter [AC0] (off-line)
[    1.029279] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    1.041297] ACPI: Lid Switch [LID]
[    1.041385] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    1.041393] ACPI: Power Button [PWRB]
[    1.041454] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    1.041460] ACPI: Sleep Button [SLPB]
[    1.042648] thermal LNXTHERM:00: registered as thermal_zone0
[    1.042652] ACPI: Thermal Zone [THRM] (54 C)
[    1.042704] GHES: HEST is not enabled!
[    1.042843] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.049073] Linux agpgart interface v0.103
[    1.051999] brd: module loaded
[    1.053598] loop: module loaded
[    1.054224] libphy: Fixed MDIO Bus: probed
[    1.054376] tun: Universal TUN/TAP device driver, 1.6
[    1.054379] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.054512] PPP generic driver version 2.4.2
[    1.054647] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.054654] ehci-pci: EHCI PCI platform driver
[    1.054901] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.054913] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.054939] ehci-pci 0000:00:1a.0: debug port 2
[    1.058859] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.058887] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7e18000
[    1.068961] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.069051] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.069056] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.069059] usb usb1: Product: EHCI Host Controller
[    1.069063] usb usb1: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
[    1.069066] usb usb1: SerialNumber: 0000:00:1a.0
[    1.069515] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.069526] ACPI: Battery Slot [BAT0] (battery present)
[    1.069614] hub 1-0:1.0: USB hub found
[    1.069628] hub 1-0:1.0: 2 ports detected
[    1.069968] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.069978] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.069999] ehci-pci 0000:00:1d.0: debug port 2
[    1.073901] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.073925] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e17000
[    1.085002] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.085116] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.085121] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.085125] usb usb2: Product: EHCI Host Controller
[    1.085129] usb usb2: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
[    1.085132] usb usb2: SerialNumber: 0000:00:1d.0
[    1.085414] hub 2-0:1.0: USB hub found
[    1.085431] hub 2-0:1.0: 2 ports detected
[    1.085597] ehci-platform: EHCI generic platform driver
[    1.085614] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.085617] ohci-pci: OHCI PCI platform driver
[    1.085638] ohci-platform: OHCI generic platform driver
[    1.085649] uhci_hcd: USB Universal Host Controller Interface driver
[    1.085908] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.085919] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.086044] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.086085] xhci_hcd 0000:00:14.0: irq 40 for MSI/MSI-X
[    1.086203] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.086207] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.086211] usb usb3: Product: xHCI Host Controller
[    1.086214] usb usb3: Manufacturer: Linux 3.13.0-32-generic xhci_hcd
[    1.086218] usb usb3: SerialNumber: 0000:00:14.0
[    1.086503] hub 3-0:1.0: USB hub found
[    1.086524] hub 3-0:1.0: 4 ports detected
[    1.086700] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.086708] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    1.086787] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.086791] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.086795] usb usb4: Product: xHCI Host Controller
[    1.086798] usb usb4: Manufacturer: Linux 3.13.0-32-generic xhci_hcd
[    1.086802] usb usb4: SerialNumber: 0000:00:14.0
[    1.087088] hub 4-0:1.0: USB hub found
[    1.087116] hub 4-0:1.0: 4 ports detected
[    1.093267] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.094967] i8042: Detected active multiplexing controller, rev 1.1
[    1.097153] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.097162] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.097204] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.097239] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.097273] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.097653] mousedev: PS/2 mouse device common for all mice
[    1.098351] rtc_cmos 00:05: RTC can wake from S4
[    1.098583] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.098623] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.098741] device-mapper: uevent: version 1.0.3
[    1.098900] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    1.098910] ledtrig-cpu: registered to indicate activity on CPUs
[    1.098913] EFI Variables Facility v0.08 2004-May-17
[    1.102917] TCP: cubic registered
[    1.103079] NET: Registered protocol family 10
[    1.103366] NET: Registered protocol family 17
[    1.103382] Key type dns_resolver registered
[    1.103930] Loading compiled-in X.509 certificates
[    1.105890] Loaded X.509 cert 'Magrathea: Glacier signing key: 223a1a1af7ef14be22890f9d1cc63d083fee59bf'
[    1.105911] registered taskstats version 1
[    1.110168] Key type trusted registered
[    1.113988] Key type encrypted registered
[    1.117744] AppArmor: AppArmor sha1 policy hashing enabled
[    1.117750] IMA: No TPM chip found, activating TPM-bypass!
[    1.118182] regulator-dummy: disabling
[    1.118251]   Magic number: 10:269:400
[    1.118378] rtc_cmos 00:05: setting system clock to 2014-12-01 22:23:11 UTC (1417472591)
[    1.118994] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.118997] EDD information not available.
[    1.119186] PM: Hibernation image not present or could not be loaded.
[    1.121450] Freeing unused kernel memory: 1356K (ffffffff81d1e000 - ffffffff81e71000)
[    1.121454] Write protecting the kernel read-only data: 12288k
[    1.124514] Freeing unused kernel memory: 580K (ffff88000176f000 - ffff880001800000)
[    1.127429] Freeing unused kernel memory: 612K (ffff880001b67000 - ffff880001c00000)
[    1.137524] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.163044] udevd[99]: starting version 175
[    1.355561] alx 0000:03:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [50:46:5d:39:cf:92]
[    1.359833] ahci 0000:00:1f.2: version 3.0
[    1.360099] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[    1.360174] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
[    1.360180] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    1.360855] scsi0 : ahci
[    1.361002] scsi1 : ahci
[    1.361103] scsi2 : ahci
[    1.361199] scsi3 : ahci
[    1.361271] ata1: SATA max UDMA/133 abar m2048@0xf7e16000 port 0xf7e16100 irq 41
[    1.361274] ata2: DUMMY
[    1.361277] ata3: DUMMY
[    1.361279] ata4: DUMMY
[    1.380982] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.513356] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.513363] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.513946] hub 1-1:1.0: USB hub found
[    1.514048] hub 1-1:1.0: 4 ports detected
[    1.625130] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.681110] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.682172] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.682388] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[    1.682400] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.683377] ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA6C0, max UDMA/133
[    1.683387] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.684585] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.684790] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[    1.684802] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.685680] ata1.00: configured for UDMA/133
[    1.686106] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54505 GG2O PQ: 0 ANSI: 5
[    1.686367] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.686374] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.686418] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.686475] sd 0:0:0:0: [sda] Write Protect is off
[    1.686480] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.686524] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.757328] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.757336] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.757793] hub 2-1:1.0: USB hub found
[    1.757980] hub 2-1:1.0: 4 ports detected
[    1.763077]  sda: sda1 sda2 sda3
[    1.763692] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.829050] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[    1.927043] usb 1-1.1: New USB device found, idVendor=04ca, idProduct=3005
[    1.927054] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.927061] usb 1-1.1: Product: Bluetooth USB Host Controller
[    1.927065] usb 1-1.1: Manufacturer: Atheros Communications
[    1.927070] usb 1-1.1: SerialNumber: Alaska Day 2006
[    1.944968] tsc: Refined TSC clocksource calibration: 1097.507 MHz
[    1.997184] usb 1-1.2: new high-speed USB device number 4 using ehci-pci
[    2.190285] usb 1-1.2: New USB device found, idVendor=13d3, idProduct=5188
[    2.190295] usb 1-1.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    2.190301] usb 1-1.2: Product: USB2.0 UVC HD Webcam
[    2.190306] usb 1-1.2: Manufacturer: Azurewave
[    2.190310] usb 1-1.2: SerialNumber: NULL
[    2.265079] usb 2-1.3: new full-speed USB device number 3 using ehci-pci
[    2.360282] usb 2-1.3: New USB device found, idVendor=046d, idProduct=c52f
[    2.360292] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.360298] usb 2-1.3: Product: USB Receiver
[    2.360303] usb 2-1.3: Manufacturer: Logitech
[    2.370002] hidraw: raw HID events driver (C) Jiri Kosina
[    2.377258] usbcore: registered new interface driver usbhid
[    2.377263] usbhid: USB HID core driver
[    2.383499] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input8
[    2.383684] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.3/input0
[    2.384587] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/input/input9
[    2.384800] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.3/input1
[    2.403912] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    2.945193] Switched to clocksource tsc
[    2.981401] random: init urandom read with 111 bits of entropy available
[    3.217175] random: nonblocking pool is initialized
[    3.859677] init: ureadahead main process (299) terminated with status 5
[    5.111502] Adding 1977340k swap on /dev/sda3.  Priority:-1 extents:1 across:1977340k FS
[    6.329194] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    6.720370] udevd[378]: starting version 175
[    7.859702] lp: driver loaded but no devices found
[    8.101428] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[    8.418867] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GPIS 1 (20131115/utaddress-251)
[    8.418881] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 2 (20131115/utaddress-251)
[    8.418888] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.418894] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[    8.418900] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GP01 2 (20131115/utaddress-251)
[    8.418906] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.418908] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[    8.418914] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GP01 2 (20131115/utaddress-251)
[    8.418919] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.418922] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    8.473775] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
[    8.530341] wmi: Mapper loaded
[    8.602948] cfg80211: Calling CRDA to update world regulatory domain
[    8.792672] asus_wmi: ASUS WMI generic driver loaded
[    8.795828] [drm] Initialized drm 1.1.0 20060810
[    8.800124] asus_wmi: Initialization: 0x1
[    8.800192] asus_wmi: BIOS WMI version: 7.9
[    8.800266] asus_wmi: SFUN value: 0x4a0877
[    8.802239] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input10
[    8.868354] asus_wmi: Backlight controlled by ACPI video driver
[    8.933408] Bluetooth: Core ver 2.17
[    8.933442] NET: Registered protocol family 31
[    8.933445] Bluetooth: HCI device and connection manager initialized
[    8.933457] Bluetooth: HCI socket layer initialized
[    8.933461] Bluetooth: L2CAP socket layer initialized
[    8.933469] Bluetooth: SCO socket layer initialized
[    8.970867] usbcore: registered new interface driver btusb
[    8.977691] usbcore: registered new interface driver ath3k
[    9.123068] [drm] Memory usable by graphics device = 2048M
[    9.123077] checking generic (e0000000 410000) vs hw (e0000000 10000000)
[    9.123081] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
[    9.123112] Console: switching to colour dummy device 80x25
[    9.320805] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[    9.320826] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    9.320829] [drm] Driver supports precise vblank timestamp query.
[    9.328897] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    9.361214] [drm] Wrong MCH_SSKPD value: 0x16040307
[    9.361220] [drm] This can cause pipe underruns and display issues.
[    9.361222] [drm] Please upgrade your BIOS to fix this.
[    9.381171] fbcon: inteldrmfb (fb0) is primary device
[    9.497618] psmouse serio4: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[    9.992917] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x361f01)
[   10.007450] psmouse serio4: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0c.
[   10.059904] ath: phy0: Disable PLL PowerSave
[   10.067293] ath: EEPROM regdomain: 0x60
[   10.067294] ath: EEPROM indicates we should expect a direct regpair map
[   10.067296] ath: Country alpha2 being used: 00
[   10.067297] ath: Regpair used: 0x60
[   10.075804] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input14
[   10.080867] Console: switching to colour frame buffer device 170x48
[   10.085541] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   10.085543] i915 0000:00:02.0: registered panic notifier
[   10.101786] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   10.109481] acpi device:38: registered as cooling_device2
[   10.120897] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input15
[   10.121046] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   10.122497] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   10.234922] SKU: Nid=0x1d sku_cfg=0x4005812d
[   10.234927] SKU: port_connectivity=0x1
[   10.234929] SKU: enable_pcbeep=0x0
[   10.234931] SKU: check_sum=0x00000005
[   10.234934] SKU: customization=0x00000081
[   10.234936] SKU: external_amp=0x5
[   10.234938] SKU: platform_type=0x1
[   10.234940] SKU: swap=0x0
[   10.234942] SKU: override=0x1
[   10.235405] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   10.235408]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   10.235411]    hp_outs=1 (0x1a/0x0/0x0/0x0/0x0)
[   10.235413]    mono: mono_out=0x0
[   10.235415]    inputs:
[   10.235418]      Mic=0x12
[   10.235421] realtek: No valid SSID, checking pincfg 0x4005812d for NID 0x1d
[   10.235424] realtek: Enabling init ASM_ID=0x812d CODEC_ID=10ec0269
[   10.261135] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   10.261699] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90004500000, irq=17
[   10.272622] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[   10.272898] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   10.812719] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   10.896551] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   11.029290] Linux video capture interface: v2.00
[   12.014694] uvcvideo: Found UVC 1.00 device USB2.0 UVC HD Webcam (13d3:5188)
[   12.020717] input: USB2.0 UVC HD Webcam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input18
[   12.020875] usbcore: registered new interface driver uvcvideo
[   12.020879] USB Video Class driver (1.1.1)
[   12.264620] type=1400 audit(1417472602.640:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=787 comm="apparmor_parser"
[   12.264636] type=1400 audit(1417472602.640:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=787 comm="apparmor_parser"
[   12.264645] type=1400 audit(1417472602.640:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=787 comm="apparmor_parser"
[   12.264693] type=1400 audit(1417472602.644:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=756 comm="apparmor_parser"
[   12.264709] type=1400 audit(1417472602.644:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=756 comm="apparmor_parser"
[   12.264718] type=1400 audit(1417472602.644:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=756 comm="apparmor_parser"
[   12.265714] type=1400 audit(1417472602.644:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=787 comm="apparmor_parser"
[   12.265725] type=1400 audit(1417472602.644:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=787 comm="apparmor_parser"
[   12.265758] type=1400 audit(1417472602.644:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=756 comm="apparmor_parser"
[   12.265768] type=1400 audit(1417472602.644:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=756 comm="apparmor_parser"
[   14.183833] init: failsafe main process (855) killed by TERM signal
[   14.553266] ppdev: user-space parallel port driver
[   14.604644] Bluetooth: RFCOMM TTY layer initialized
[   14.604663] Bluetooth: RFCOMM socket layer initialized
[   14.604674] Bluetooth: RFCOMM ver 1.11
[   15.332428] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   15.332435] Bluetooth: BNEP filters: protocol multicast
[   15.332448] Bluetooth: BNEP socket layer initialized
[   17.339394] audit_printk_skb: 78 callbacks suppressed
[   17.339401] type=1400 audit(1417472607.716:38): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=1017 comm="apparmor_parser"
[   17.339415] type=1400 audit(1417472607.716:39): apparmor="STATUS" operation="profile_load" profile="unconfined" name="launchpad_integration" pid=1017 comm="apparmor_parser"
[   17.339424] type=1400 audit(1417472607.716:40): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=1017 comm="apparmor_parser"
[   17.339433] type=1400 audit(1417472607.716:41): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=1017 comm="apparmor_parser"
[   17.339441] type=1400 audit(1417472607.716:42): apparmor="STATUS" operation="profile_load" profile="unconfined" name="launchpad_integration" pid=1017 comm="apparmor_parser"
[   17.339449] type=1400 audit(1417472607.716:43): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=1017 comm="apparmor_parser"
[   17.339457] type=1400 audit(1417472607.716:44): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=1017 comm="apparmor_parser"
[   17.339466] type=1400 audit(1417472607.716:45): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=1017 comm="apparmor_parser"
[   17.354373] type=1400 audit(1417472607.732:46): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="launchpad_integration" pid=1017 comm="apparmor_parser"
[   17.354391] type=1400 audit(1417472607.732:47): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=1017 comm="apparmor_parser"
[   18.216917] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   18.226243] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   18.247734] alx 0000:03:00.0: irq 45 for MSI/MSI-X
[   18.250050] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.251378] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   20.552328] init: anacron main process (1103) killed by TERM signal
[   46.656318] audit_printk_skb: 81 callbacks suppressed
[   46.656326] type=1400 audit(1417472637.036:75): apparmor="DENIED" operation="open" profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/gvfs/remote-volume-monitors/" pid=1807 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[   72.504004] wlan0: authenticate with 00:73:e0:79:cc:18
[   72.530524] wlan0: send auth to 00:73:e0:79:cc:18 (try 1/3)
[   72.532465] wlan0: authenticated
[   72.535416] wlan0: associate with 00:73:e0:79:cc:18 (try 1/3)
[   72.538718] wlan0: RX AssocResp from 00:73:e0:79:cc:18 (capab=0x431 status=0 aid=1)
[   72.539076] wlan0: associated
[   72.539112] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

heartsmagic · 02 Aralık 2014 - 00:41:36

Şu kenarda dursun:
http://askubuntu.com/a/541841/32037

Kod Seç

aa-status
çıktısını buraya aktarır mısın.

zeabidin · 02 Aralık 2014 - 00:49:02

Kod Seç

18 profiles are loaded.
18 profiles are in enforce mode.
   /sbin/dhclient
   /usr/bin/evince
   /usr/bin/evince-previewer
   /usr/bin/evince-previewer//launchpad_integration
   /usr/bin/evince-previewer//sanitized_helper
   /usr/bin/evince-thumbnailer
   /usr/bin/evince-thumbnailer//sanitized_helper
   /usr/bin/evince//launchpad_integration
   /usr/bin/evince//sanitized_helper
   /usr/lib/NetworkManager/nm-dhcp-client.action
   /usr/lib/connman/scripts/dhclient-script
   /usr/lib/cups/backend/cups-pdf
   /usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper
   /usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser
   /usr/lib/telepathy/mission-control-5
   /usr/lib/telepathy/telepathy-*
   /usr/sbin/cupsd
   /usr/sbin/tcpdump
0 profiles are in complain mode.
3 processes have profiles defined.
3 processes are in enforce mode.
   /sbin/dhclient (1985) 
   /usr/lib/telepathy/mission-control-5 (1807) 
   /usr/sbin/cupsd (954) 
0 processes are in complain mode.
0 processes are unconfined but have a profile defined.

heartsmagic · 02 Aralık 2014 - 02:23:17

Kod Seç

ls /etc/apparmor.d/ | grep telepathy
ne diyor?

zeabidin · 02 Aralık 2014 - 10:52:14

Kod Seç

usr.lib.telepathy

heartsmagic · 02 Aralık 2014 - 11:33:46

Kod Seç

sudo ln -s /etc/apparmor.d/usr.lib.telepathy /etc/apparmor.d/disable/
sudo apparmor_parser -R  /etc/apparmor.d/usr.lib.telepathy
sudo service apparmor restart

Sonra sistemi yeniden başlatıp, tekrar dmesg çıktısını buraya geç. Umarım yanlış sularda kürek çekmiyoruzdur.

zeabidin · 02 Aralık 2014 - 13:56:48

Bana değişen bir şey olmadı gibi geliyor ama. Bir de başlangıçta söylemeyi unuttum ama kapanırken de bir takım yazılar çıkıyor. Ama kapanmayı çok etkilemiyor. Onlar da sistemin bir hatasından kaynaklanıyor olmasın?

Kod Seç

[    0.263529] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.263533] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
[    0.263538] system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.263542] system 00:0c: [mem 0x7ee00000-0x7ee00fff] has been reserved
[    0.263548] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.263716] system 00:0d: [mem 0x7ee00000-0x7ee00fff] has been reserved
[    0.263722] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.264007] system 00:0e: [mem 0x20000000-0x201fffff] has been reserved
[    0.264011] system 00:0e: [mem 0x40000000-0x401fffff] has been reserved
[    0.264017] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.264087] pnp: PnP ACPI: found 15 devices
[    0.264090] ACPI: bus type PNP unregistered
[    0.271855] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.271879] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.271890] pci 0000:00:1c.1:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    0.271906] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.271912] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
[    0.271922] pci 0000:00:1c.3:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.271940] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.271944] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.271947] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.271951] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.271955] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.271959] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.271962] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[    0.271966] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[    0.271969] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[    0.271973] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[    0.271976] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[    0.271980] pci_bus 0000:00: resource 15 [mem 0x7ee00000-0xfeafffff]
[    0.271984] pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff]
[    0.271988] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.271991] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff]
[    0.272043] NET: Registered protocol family 2
[    0.272305] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.272399] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.272462] TCP: Hash tables configured (established 16384 bind 16384)
[    0.272497] TCP: reno registered
[    0.272508] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.272528] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.272622] NET: Registered protocol family 1
[    0.272647] pci 0000:00:02.0: Boot video device
[    0.273686] pci 0000:03:00.0: set MSI_INTX_DISABLE_BUG flag
[    0.273695] PCI: CLS 64 bytes, default 64
[    0.273802] Trying to unpack rootfs image as initramfs...
[    0.906101] Freeing initrd memory: 18448K (ffff880035be8000 - ffff880036dec000)
[    0.906109] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.906114] software IO TLB [mem 0x70c00000-0x74c00000] (64MB) mapped at [ffff880070c00000-ffff880074bfffff]
[    0.906440] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28
[    0.906455] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28
[    0.906540] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.906543] Scanning for low memory corruption every 60 seconds
[    0.906954] Initialise system trusted keyring
[    0.907038] audit: initializing netlink socket (disabled)
[    0.907056] type=2000 audit(1417521227.896:1): initialized
[    0.967595] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.969627] zbud: loaded
[    0.969896] VFS: Disk quotas dquot_6.5.2
[    0.969970] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.970768] fuse init (API version 7.22)
[    0.970914] msgmni has been set to 3632
[    0.971013] Key type big_key registered
[    0.971585] Key type asymmetric registered
[    0.971589] Asymmetric key parser 'x509' registered
[    0.971652] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.971702] io scheduler noop registered
[    0.971705] io scheduler deadline registered (default)
[    0.971749] io scheduler cfq registered
[    0.972590] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.972616] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.972696] efifb: probing for efifb
[    0.975079] efifb: framebuffer at 0xe0000000, mapped to 0xffffc90004400000, using 4160k, total 4160k
[    0.975082] efifb: mode is 1366x768x32, linelength=5504, pages=1
[    0.975084] efifb: scrolling: redraw
[    0.975088] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.979914] Console: switching to colour frame buffer device 170x48
[    0.984455] fb0: EFI VGA frame buffer device
[    0.984489] intel_idle: MWAIT substates: 0x21120
[    0.984492] intel_idle: v0.4 model 0x2A
[    0.984495] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.984617] ipmi message handler version 39.2
[    0.997015] ACPI: AC Adapter [AC0] (on-line)
[    0.997215] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    1.009145] ACPI: Lid Switch [LID]
[    1.009233] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    1.009241] ACPI: Power Button [PWRB]
[    1.009300] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    1.009306] ACPI: Sleep Button [SLPB]
[    1.010493] thermal LNXTHERM:00: registered as thermal_zone0
[    1.010498] ACPI: Thermal Zone [THRM] (66 C)
[    1.010546] GHES: HEST is not enabled!
[    1.010691] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.016953] Linux agpgart interface v0.103
[    1.024771] brd: module loaded
[    1.025977] loop: module loaded
[    1.026602] libphy: Fixed MDIO Bus: probed
[    1.026751] tun: Universal TUN/TAP device driver, 1.6
[    1.026754] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.026830] PPP generic driver version 2.4.2
[    1.026900] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.026907] ehci-pci: EHCI PCI platform driver
[    1.027146] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.027157] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.027180] ehci-pci 0000:00:1a.0: debug port 2
[    1.031085] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.031124] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7e18000
[    1.033368] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.033380] ACPI: Battery Slot [BAT0] (battery present)
[    1.040833] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.041074] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.041081] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.041086] usb usb1: Product: EHCI Host Controller
[    1.041090] usb usb1: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
[    1.041093] usb usb1: SerialNumber: 0000:00:1a.0
[    1.041390] hub 1-0:1.0: USB hub found
[    1.041466] hub 1-0:1.0: 2 ports detected
[    1.042156] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.042169] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.042191] ehci-pci 0000:00:1d.0: debug port 2
[    1.046097] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.046124] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e17000
[    1.056874] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.056998] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.057002] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.057006] usb usb2: Product: EHCI Host Controller
[    1.057010] usb usb2: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
[    1.057014] usb usb2: SerialNumber: 0000:00:1d.0
[    1.057306] hub 2-0:1.0: USB hub found
[    1.057323] hub 2-0:1.0: 2 ports detected
[    1.057483] ehci-platform: EHCI generic platform driver
[    1.057499] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.057501] ohci-pci: OHCI PCI platform driver
[    1.057516] ohci-platform: OHCI generic platform driver
[    1.057527] uhci_hcd: USB Universal Host Controller Interface driver
[    1.057790] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.057804] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.057931] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.057973] xhci_hcd 0000:00:14.0: irq 40 for MSI/MSI-X
[    1.058092] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.058096] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.058100] usb usb3: Product: xHCI Host Controller
[    1.058103] usb usb3: Manufacturer: Linux 3.13.0-32-generic xhci_hcd
[    1.058107] usb usb3: SerialNumber: 0000:00:14.0
[    1.058396] hub 3-0:1.0: USB hub found
[    1.058417] hub 3-0:1.0: 4 ports detected
[    1.058600] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.058609] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    1.058689] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.058693] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.058697] usb usb4: Product: xHCI Host Controller
[    1.058701] usb usb4: Manufacturer: Linux 3.13.0-32-generic xhci_hcd
[    1.058704] usb usb4: SerialNumber: 0000:00:14.0
[    1.058983] hub 4-0:1.0: USB hub found
[    1.059004] hub 4-0:1.0: 4 ports detected
[    1.065150] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.066946] i8042: Detected active multiplexing controller, rev 1.1
[    1.067889] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.067902] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.067951] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.067982] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.068015] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.068385] mousedev: PS/2 mouse device common for all mice
[    1.068958] rtc_cmos 00:05: RTC can wake from S4
[    1.069233] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.069283] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.069408] device-mapper: uevent: version 1.0.3
[    1.069642] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    1.069655] ledtrig-cpu: registered to indicate activity on CPUs
[    1.069659] EFI Variables Facility v0.08 2004-May-17
[    1.074194] TCP: cubic registered
[    1.074365] NET: Registered protocol family 10
[    1.074651] NET: Registered protocol family 17
[    1.074671] Key type dns_resolver registered
[    1.075204] Loading compiled-in X.509 certificates
[    1.077167] Loaded X.509 cert 'Magrathea: Glacier signing key: 223a1a1af7ef14be22890f9d1cc63d083fee59bf'
[    1.077189] registered taskstats version 1
[    1.081510] Key type trusted registered
[    1.085348] Key type encrypted registered
[    1.089193] AppArmor: AppArmor sha1 policy hashing enabled
[    1.089200] IMA: No TPM chip found, activating TPM-bypass!
[    1.089625] regulator-dummy: disabling
[    1.089722]   Magic number: 10:690:882
[    1.089876] rtc_cmos 00:05: setting system clock to 2014-12-02 11:53:48 UTC (1417521228)
[    1.090515] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.090519] EDD information not available.
[    1.090704] PM: Hibernation image not present or could not be loaded.
[    1.093040] Freeing unused kernel memory: 1356K (ffffffff81d1e000 - ffffffff81e71000)
[    1.093045] Write protecting the kernel read-only data: 12288k
[    1.096106] Freeing unused kernel memory: 580K (ffff88000176f000 - ffff880001800000)
[    1.099065] Freeing unused kernel memory: 612K (ffff880001b67000 - ffff880001c00000)
[    1.108181] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.133152] udevd[98]: starting version 175
[    1.336823] alx 0000:03:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [50:46:5d:39:cf:92]
[    1.337130] ahci 0000:00:1f.2: version 3.0
[    1.337368] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[    1.337446] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
[    1.337453] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    1.338468] scsi0 : ahci
[    1.338612] scsi1 : ahci
[    1.338727] scsi2 : ahci
[    1.338836] scsi3 : ahci
[    1.338907] ata1: SATA max UDMA/133 abar m2048@0xf7e16000 port 0xf7e16100 irq 41
[    1.338910] ata2: DUMMY
[    1.338912] ata3: DUMMY
[    1.338914] ata4: DUMMY
[    1.352855] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.485197] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.485204] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.485607] hub 1-1:1.0: USB hub found
[    1.485661] hub 1-1:1.0: 4 ports detected
[    1.596890] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.656876] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.657960] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.658173] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[    1.658184] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.659176] ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA6C0, max UDMA/133
[    1.659185] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.660376] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.660583] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[    1.660594] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.661468] ata1.00: configured for UDMA/133
[    1.661868] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54505 GG2O PQ: 0 ANSI: 5
[    1.662151] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.662161] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.662168] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.662279] sd 0:0:0:0: [sda] Write Protect is off
[    1.662285] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.662358] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.729347] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.729357] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.729717] hub 2-1:1.0: USB hub found
[    1.729776] hub 2-1:1.0: 4 ports detected
[    1.740301]  sda: sda1 sda2 sda3
[    1.741068] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.800947] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[    1.895030] usb 1-1.1: New USB device found, idVendor=04ca, idProduct=3005
[    1.895041] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.895047] usb 1-1.1: Product: Bluetooth USB Host Controller
[    1.895052] usb 1-1.1: Manufacturer: Atheros Communications
[    1.895057] usb 1-1.1: SerialNumber: Alaska Day 2006
[    1.908812] tsc: Refined TSC clocksource calibration: 1097.506 MHz
[    1.964927] usb 1-1.2: new high-speed USB device number 4 using ehci-pci
[    2.158071] usb 1-1.2: New USB device found, idVendor=13d3, idProduct=5188
[    2.158079] usb 1-1.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    2.158083] usb 1-1.2: Product: USB2.0 UVC HD Webcam
[    2.158086] usb 1-1.2: Manufacturer: Azurewave
[    2.158090] usb 1-1.2: SerialNumber: NULL
[    2.169186] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    2.236930] usb 2-1.3: new full-speed USB device number 3 using ehci-pci
[    2.332270] usb 2-1.3: New USB device found, idVendor=046d, idProduct=c52f
[    2.332280] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.332286] usb 2-1.3: Product: USB Receiver
[    2.332291] usb 2-1.3: Manufacturer: Logitech
[    2.753342] random: init urandom read with 90 bits of entropy available
[    2.909144] Switched to clocksource tsc
[    3.521620] random: nonblocking pool is initialized
[    3.703589] init: ureadahead main process (297) terminated with status 5
[    4.746655] Adding 1977340k swap on /dev/sda3.  Priority:-1 extents:1 across:1977340k FS
[    6.150865] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    6.463428] udevd[375]: starting version 175
[    7.708352] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[    7.880185] lp: driver loaded but no devices found
[    8.523839] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GPIS 1 (20131115/utaddress-251)
[    8.523852] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 2 (20131115/utaddress-251)
[    8.523860] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.523866] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[    8.523872] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GP01 2 (20131115/utaddress-251)
[    8.523877] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.523880] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[    8.523885] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GP01 2 (20131115/utaddress-251)
[    8.523891] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.523894] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    8.530418] wmi: Mapper loaded
[    8.650403] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
[    8.738505] [drm] Initialized drm 1.1.0 20060810
[    8.825343] asus_wmi: ASUS WMI generic driver loaded
[    8.833247] asus_wmi: Initialization: 0x1
[    8.833323] asus_wmi: BIOS WMI version: 7.9
[    8.833399] asus_wmi: SFUN value: 0x4a0877
[    8.835030] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input8
[    8.928929] asus_wmi: Backlight controlled by ACPI video driver
[    9.018933] [drm] Memory usable by graphics device = 2048M
[    9.018941] checking generic (e0000000 410000) vs hw (e0000000 10000000)
[    9.018945] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
[    9.018979] Console: switching to colour dummy device 80x25
[    9.046652] cfg80211: Calling CRDA to update world regulatory domain
[    9.120872] Bluetooth: Core ver 2.17
[    9.120968] NET: Registered protocol family 31
[    9.120972] Bluetooth: HCI device and connection manager initialized
[    9.121777] Bluetooth: HCI socket layer initialized
[    9.121784] Bluetooth: L2CAP socket layer initialized
[    9.121794] Bluetooth: SCO socket layer initialized
[    9.212697] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[    9.212735] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    9.212738] [drm] Driver supports precise vblank timestamp query.
[    9.212836] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    9.245043] [drm] Wrong MCH_SSKPD value: 0x16040307
[    9.245049] [drm] This can cause pipe underruns and display issues.
[    9.245051] [drm] Please upgrade your BIOS to fix this.
[    9.264967] fbcon: inteldrmfb (fb0) is primary device
[    9.420816] psmouse serio4: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[    9.451608] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    9.916541] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x361f01)
[    9.929994] psmouse serio4: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0c.
[    9.936776] usbcore: registered new interface driver btusb
[    9.954398] usbcore: registered new interface driver ath3k
[    9.992012] usb 1-1.1: USB disconnect, device number 3
[    9.996799] Console: switching to colour frame buffer device 170x48
[   10.001468] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   10.001474] i915 0000:00:02.0: registered panic notifier
[   10.001648] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input12
[   10.017725] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   10.025635] acpi device:38: registered as cooling_device2
[   10.041023] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input13
[   10.041838] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   10.554088] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   10.603090] ath: phy0: Disable PLL PowerSave
[   10.611224] ath: EEPROM regdomain: 0x60
[   10.611228] ath: EEPROM indicates we should expect a direct regpair map
[   10.611232] ath: Country alpha2 being used: 00
[   10.611234] ath: Regpair used: 0x60
[   10.612338] SKU: Nid=0x1d sku_cfg=0x4005812d
[   10.612344] SKU: port_connectivity=0x1
[   10.612348] SKU: enable_pcbeep=0x0
[   10.612350] SKU: check_sum=0x00000005
[   10.612353] SKU: customization=0x00000081
[   10.612355] SKU: external_amp=0x5
[   10.612357] SKU: platform_type=0x1
[   10.612359] SKU: swap=0x0
[   10.612361] SKU: override=0x1
[   10.613586] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   10.613591]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   10.613594]    hp_outs=1 (0x1a/0x0/0x0/0x0/0x0)
[   10.613596]    mono: mono_out=0x0
[   10.613598]    inputs:
[   10.613601]      Mic=0x12
[   10.613604] realtek: No valid SSID, checking pincfg 0x4005812d for NID 0x1d
[   10.613607] realtek: Enabling init ASM_ID=0x812d CODEC_ID=10ec0269
[   10.824594] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   11.347791] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   11.347922] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   11.382666] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   11.383233] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90004500000, irq=17
[   12.260231] type=1400 audit(1417521239.667:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=752 comm="apparmor_parser"
[   12.260246] type=1400 audit(1417521239.667:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=752 comm="apparmor_parser"
[   12.260256] type=1400 audit(1417521239.667:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=752 comm="apparmor_parser"
[   12.260320] type=1400 audit(1417521239.667:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=829 comm="apparmor_parser"
[   12.260336] type=1400 audit(1417521239.667:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=829 comm="apparmor_parser"
[   12.260345] type=1400 audit(1417521239.667:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=829 comm="apparmor_parser"
[   12.261317] type=1400 audit(1417521239.667:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=752 comm="apparmor_parser"
[   12.261328] type=1400 audit(1417521239.667:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=752 comm="apparmor_parser"
[   12.261398] type=1400 audit(1417521239.667:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=829 comm="apparmor_parser"
[   12.261408] type=1400 audit(1417521239.667:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=829 comm="apparmor_parser"
[   12.339148] hidraw: raw HID events driver (C) Jiri Kosina
[   12.410566] usbcore: registered new interface driver usbhid
[   12.410571] usbhid: USB HID core driver
[   12.941025] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input16
[   12.941888] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.3/input0
[   12.943051] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/input/input17
[   12.945914] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.3/input1
[   13.095352] Linux video capture interface: v2.00
[   13.909964] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   13.909971] Bluetooth: BNEP filters: protocol multicast
[   13.909986] Bluetooth: BNEP socket layer initialized
[   13.915869] Bluetooth: RFCOMM TTY layer initialized
[   13.915887] Bluetooth: RFCOMM socket layer initialized
[   13.915898] Bluetooth: RFCOMM ver 1.11
[   13.919279] ppdev: user-space parallel port driver
[   14.038521] init: failsafe main process (853) killed by TERM signal
[   14.661715] uvcvideo: Found UVC 1.00 device USB2.0 UVC HD Webcam (13d3:5188)
[   14.667505] input: USB2.0 UVC HD Webcam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input18
[   14.667775] usbcore: registered new interface driver uvcvideo
[   14.667779] USB Video Class driver (1.1.1)
[   17.303410] audit_printk_skb: 69 callbacks suppressed
[   17.303417] type=1400 audit(1417521244.707:35): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=1019 comm="apparmor_parser"
[   17.325016] type=1400 audit(1417521244.731:36): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=1011 comm="apparmor_parser"
[   17.325033] type=1400 audit(1417521244.731:37): apparmor="STATUS" operation="profile_load" profile="unconfined" name="launchpad_integration" pid=1011 comm="apparmor_parser"
[   17.325042] type=1400 audit(1417521244.731:38): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=1011 comm="apparmor_parser"
[   17.325050] type=1400 audit(1417521244.731:39): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=1011 comm="apparmor_parser"
[   17.325058] type=1400 audit(1417521244.731:40): apparmor="STATUS" operation="profile_load" profile="unconfined" name="launchpad_integration" pid=1011 comm="apparmor_parser"
[   17.325067] type=1400 audit(1417521244.731:41): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=1011 comm="apparmor_parser"
[   17.325075] type=1400 audit(1417521244.731:42): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=1011 comm="apparmor_parser"
[   17.325083] type=1400 audit(1417521244.731:43): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=1011 comm="apparmor_parser"
[   17.340056] type=1400 audit(1417521244.743:44): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="launchpad_integration" pid=1011 comm="apparmor_parser"
[   18.449042] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   18.449490] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   18.454158] alx 0000:03:00.0: irq 45 for MSI/MSI-X
[   18.454334] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.455422] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   22.847385] wlan0: authenticate with 00:3a:98:eb:dd:a2
[   22.869188] wlan0: direct probe to 00:3a:98:eb:dd:a2 (try 1/3)
[   23.072340] wlan0: direct probe to 00:3a:98:eb:dd:a2 (try 2/3)
[   23.276324] wlan0: direct probe to 00:3a:98:eb:dd:a2 (try 3/3)
[   23.480307] wlan0: authentication with 00:3a:98:eb:dd:a2 timed out
[   23.837660] wlan0: authenticate with 44:ad:d9:57:20:81
[   23.861124] wlan0: send auth to 44:ad:d9:57:20:81 (try 1/3)
[   23.866213] wlan0: authenticated
[   23.868268] wlan0: associate with 44:ad:d9:57:20:81 (try 1/3)
[   23.879466] wlan0: RX AssocResp from 44:ad:d9:57:20:81 (capab=0x21 status=0 aid=57)
[   23.879524] wlan0: associated
[   23.879573] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

heartsmagic · 03 Aralık 2014 - 01:13:11

Fark etmez olur mu, hem gecikme görünmüyor hem de açılış 72 saniyeden 23 saniyeye düşmüş. Telepathy kısmında oldukça fazla bekliyordu, o düzelmiş. Ayrıca başka bir şey daha kendiliğinden düzelmiş gibi. Bir sonraki açılış yine bu sürelerde olursa sorun yok demektir senin için.

Kapanıştaki iletiler neler bilmiyorum ancak her ileti sorun ifade etmez. Bilgi olabilir, uyarı olabilir...

zeabidin · 03 Aralık 2014 - 09:50:03

Evet orda 23 saniye gözüküyor ama açılışta beklediğim süre değişmedi gibi.

could not write bytes broken pipe

Hem açılışta hemde kapanışta geçen yazılarda şöyle bir şey var.

Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 03 Aralık 2014 - 12:40:07

Artı birde az önce usb den 4 5 farklı linux ve ubuntu sürümü denedim boot olmuyor. Farklı programlar kullandım. Forklı dosya sistemleri ile biçimlendirdim ama sonuç aynı.

heartsmagic · 03 Aralık 2014 - 23:56:59

Peki sistem nerede bekliyor? 23 saniye içinde tamamlanmış görünüyor olaylar. Nerede bekliyor yani sistem?
Grafik kartı neydi bu makinede, şu çıktıları aktar lütfen: ekrankomut

Önyükleme konusu için doğrudan bir şey söyleyemem, forumda farklı öneriler var. Farklı uygulamalardan neler denedin bilemiyorum, o nedenle ben veya bir başka biri aynı önerileri getirebilir sana. Ancak, onu bu başlıkta konuşmayalım.

zeabidin · 08 Aralık 2014 - 12:05:40

Siyah bir ekran geliyor orada bayağı bekliyorum.

Kod Seç

00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)

Kod Seç

direct rendering: Yes
    GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer, 
    GLX_MESA_query_renderer, GLX_MESA_swap_control, GLX_OML_swap_method, 
OpenGL renderer string: Mesa DRI Intel(R) Sandybridge Mobile 
    GL_NV_conditional_render, GL_AMD_draw_buffers_blend,

Kod Seç

00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1c.3 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation 7 Series Chipset Family LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
02:00.0 Network controller: Qualcomm Atheros AR9485 Wireless Network Adapter (rev 01)
03:00.0 Ethernet controller: Qualcomm Atheros AR8162 Fast Ethernet (rev 10)

Kod Seç

Screen 0: minimum 320 x 200, current 1366 x 768, maximum 32767 x 32767
LVDS1 connected primary 1366x768+0+0 (normal left inverted right x axis y axis) 256mm x 144mm
   1366x768       60.0*+
   1360x768       59.8     60.0  
   1024x768       60.0  
   800x600        60.3     56.2  
   640x480        59.9  
VGA1 disconnected (normal left inverted right x axis y axis)
HDMI1 disconnected (normal left inverted right x axis y axis)
DP1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)

bytan · 09 Aralık 2014 - 15:58:44

Kullanıcı adı ve şifre girdikten sonra mı bekliyor bu siyah ekranda yoksa öncesinde mi?

Ubuntu Türkiye

Haberler:

Ubuntu Geç Açılıyor

zeabidin

mendirec

zeabidin

mendirec

zeabidin

heartsmagic

zeabidin

heartsmagic

zeabidin

heartsmagic

zeabidin

heartsmagic

zeabidin

heartsmagic

zeabidin

heartsmagic

zeabidin

bytan