RTL8192CU Lubuntu Sorunu

[Yavuz4LP]

İyi günler,

https://forum.ubuntu-tr.net/index.php?topic=43412.0 konusunda çözümü ulaşmaştım fakat Xubuntu'dan Lubuntu 14.04 LTS sürümüne geçtiğimde,konuda çözüm olarak belirtilen metodları denememe rağmen halen çözüme ulaşmış değilim.Talebiniz üzerine gereken çıktıları yazabilirim.

Şimdiden teşekkürler.

[heartsmagic]

Çıktılar lazım elbette. Özellikle de çözüm olduğunu söylediğin şu iletideki adımlar için:
https://forum.ubuntu-tr.net/index.php?topic=43412.msg507613#msg507613

[Yavuz4LP]

@if
buyrun bayım,çıktılar;

cat /etc/lsb-release

Kod Seç Genişlet

DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=14.04
DISTRIB_CODENAME=trusty
DISTRIB_DESCRIPTION="Ubuntu 14.04.1 LTS"

uname -a

Kod Seç Genişlet

Linux pharaon 3.13.0-32-generic #57-Ubuntu SMP Tue Jul 15 03:51:12 UTC 2014 i686 i686 i686 GNU/Linux

lspci

Kod Seç Genişlet

00:00.0 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. PT890 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:00.7 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/VX700 PCI Bridge
00:0f.0 IDE interface: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:10.0 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.1 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.2 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.3 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.4 USB controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
00:13.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8100/8101L/8139 PCI Fast Ethernet Adapter (rev 10)
01:00.0 VGA compatible controller: VIA Technologies, Inc. CN700/P4M800 Pro/P4M800 CE/VN800 Graphics [S3 UniChrome Pro] (rev 01)

lsusb

Kod Seç Genişlet

Bus 001 Device 003: ID 04e8:685e Samsung Electronics Co., Ltd GT-I9100 Phone [Galaxy S II] (USB Debugging mode)
Bus 001 Device 002: ID 2357:0100  
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

rfkill list

Kod Seç Genişlet

0: phy0: Wireless LAN
    Soft blocked: no
    Hard blocked: no

sudo lshw -C network

Kod Seç Genişlet

 *-network               
       description: Ethernet interface
       product: RTL-8100/8101L/8139 PCI Fast Ethernet Adapter
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 13
       bus info: pci@0000:00:13.0
       logical name: eth0
       version: 10
       serial: 00:16:e6:69:88:ca
       size: 10Mbit/s
       capacity: 100Mbit/s
       width: 32 bits
       clock: 33MHz
       capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=half latency=64 link=no maxlatency=64 mingnt=32 multicast=yes port=MII speed=10Mbit/s
       resources: irq:18 ioport:c000(size=256) memory:de001000-de0010ff
  *-network
       description: Wireless interface
       physical id: 1
       bus info: usb@1:2
       logical name: wlan0
       serial: f8:1a:67:23:93:fb
       capabilities: ethernet physical wireless
       configuration: broadcast=yes driver=rtl8192cu driverversion=3.13.0-32-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11bgn

ifconfig

Kod Seç Genişlet

eth0      Link encap:Ethernet  HWaddr 00:16:e6:69:88:ca  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:480 errors:0 dropped:0 overruns:0 frame:0
          TX packets:480 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:38208 (38.2 KB)  TX bytes:38208 (38.2 KB)

wlan0     Link encap:Ethernet  HWaddr f8:1a:67:23:93:fb  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

iwconfig

Kod Seç Genişlet

wlan0     IEEE 802.11bgn  ESSID:off/any  
          Mode:Managed  Access Point: Not-Associated   Tx-Power=20 dBm   
          Retry  long limit:7   RTS thr=2347 B   Fragment thr:off
          Power Management:off
          
lo        no wireless extensions.

eth0      no wireless extensions.

iwlist scanning

Kod Seç Genişlet

wlan0     No scan results

lo        Interface doesn't support scanning.

eth0      Interface doesn't support scanning.

lsmod

Kod Seç Genişlet

Module                  Size  Used by
bnep                   18895  2
rfcomm                 53664  0
bluetooth             342206  10 bnep,rfcomm
arc4                   12536  2
rtl8192cu              66675  0
rtl_usb                18072  1 rtl8192cu
rtlwifi                52835  2 rtl_usb,rtl8192cu
rtl8192c_common        47340  1 rtl8192cu
snd_via82xx            28455  1
snd_mpu401_uart        13865  1 snd_via82xx
snd_ac97_codec        105709  1 snd_via82xx
mac80211              546051  3 rtl_usb,rtlwifi,rtl8192cu
ac97_bus               12642  1 snd_ac97_codec
gameport               15189  1 snd_via82xx
snd_pcm                85501  2 snd_via82xx,snd_ac97_codec
cfg80211              409394  2 mac80211,rtlwifi
cdc_acm                27963  0
snd_page_alloc         14230  2 snd_via82xx,snd_pcm
snd_seq_midi           13132  0
snd_seq_midi_event     14475  1 snd_seq_midi
snd_rawmidi            25135  2 snd_mpu401_uart,snd_seq_midi
snd_seq                55383  2 snd_seq_midi_event,snd_seq_midi
snd_seq_device         14137  3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer              28584  2 snd_pcm,snd_seq
snd                    60871  11 snd_via82xx,snd_ac97_codec,snd_timer,snd_pcm,snd_seq,snd_rawmidi,snd_mpu401_uart,snd_seq_device,snd_seq_midi
i2c_viapro             13096  0
serio_raw              13230  0
soundcore              12600  1 snd
shpchp                 32128  0
parport_pc             31981  1
mac_hid                13037  0
ppdev                  17391  0
lp                     13299  0
parport                40836  3 lp,ppdev,parport_pc
pata_acpi              12886  0
usb_storage            48417  0
8139too                32571  0
psmouse                91329  0
8139cp                 27171  0
floppy                 55416  0
sata_via               13535  4
mii                    13654  2 8139cp,8139too
pata_via               13407  0

dmesg

Kod Seç Genişlet

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.13.0-32-generic (buildd@roseapple) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #57-Ubuntu SMP Tue Jul 15 03:51:12 UTC 2014 (Ubuntu 3.13.0-32.57-generic 3.13.11.4)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005bfeffff] usable
[    0.000000] BIOS-e820: [mem 0x000000005bff0000-0x000000005bff2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000005bff3000-0x000000005bffffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.3 present.
[    0.000000] DMI:    /8VM800PMD-775, BIOS F5 08/25/2006
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x5bff0 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-EFFFF uncachable
[    0.000000]   F0000-F7FFF write-through
[    0.000000]   F8000-F8FFF uncachable
[    0.000000]   F9000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 base 040000000 mask FE0000000 write-back
[    0.000000]   2 base 05C000000 mask FFC000000 uncachable
[    0.000000]   3 base 0D0000000 mask FF8000000 write-combining
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [mem 0x000f51a0-0x000f51af] mapped at [c00f51a0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff]
[    0.000000]  [mem 0x37800000-0x379fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x34000000-0x377fffff]
[    0.000000]  [mem 0x34000000-0x377fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x33ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[    0.000000]  [mem 0x37a00000-0x37bfdfff] page 4k
[    0.000000] BRK [0x01b8e000, 0x01b8efff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35c3e000-0x36e16fff]
[    0.000000] ACPI: RSDP 000f6b10 000014 (v00 P4M80P)
[    0.000000] ACPI: RSDT 5bff3040 00002C (v01 P4M80P AWRDACPI 42302E31 AWRD 01010101)
[    0.000000] ACPI: FACP 5bff30c0 000074 (v01 P4M80P AWRDACPI 42302E31 AWRD 01010101)
[    0.000000] ACPI: DSDT 5bff3180 003519 (v01 P4M80P AWRDACPI 00001000 MSFT 0100000C)
[    0.000000] ACPI: FACS 5bff0000 000040
[    0.000000] ACPI: APIC 5bff6700 000084 (v01 P4M80P AWRDACPI 42302E31 AWRD 01010101)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 579MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37bfe000
[    0.000000] BRK [0x01b8f000, 0x01b8ffff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x37bfdfff]
[    0.000000]   HighMem  [mem 0x37bfe000-0x5bfeffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x5bfeffff]
[    0.000000] On node 0 totalpages: 376718
[    0.000000] free_area_init_node: node 0, pgdat c1997200, node_mem_map f707e020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 1752 pages used for memmap
[    0.000000]   Normal zone: 224254 pages, LIFO batch:31
[    0.000000]   HighMem zone: 1160 pages used for memmap
[    0.000000]   HighMem zone: 148466 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x5c000000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f703d000 s36096 r0 d21248 u57344
[    0.000000] pcpu-alloc: s36096 r0 d21248 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 374934
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-32-generic root=UUID=0a3a3f9c-772d-484b-9d07-c936c188b65d ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 3014520 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (00037bfe:0005bff0)
[    0.000000] Memory: 1460904K/1506872K available (6528K kernel code, 639K rwdata, 2760K rodata, 872K init, 924K bss, 45968K reserved, 593864K highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff14000 - 0xfffff000   ( 940 kB)
[    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
[    0.000000]       .init : 0xc19b4000 - 0xc1a8e000   ( 872 kB)
[    0.000000]       .data : 0xc1660532 - 0xc19b3e80   (3406 kB)
[    0.000000]       .text : 0xc1000000 - 0xc1660532   (6529 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]     RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] NR_IRQS:2304 nr_irqs:712 16
[    0.000000] CPU 0 irqstacks, hard=f5408000 soft=f540a000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2800.160 MHz processor
[    0.008004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.32 BogoMIPS (lpj=11200640)
[    0.008010] pid_max: default: 32768 minimum: 301
[    0.008064] Security Framework initialized
[    0.008098] AppArmor: AppArmor initialized
[    0.008101] Yama: becoming mindful.
[    0.008191] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.008196] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.008577] Initializing cgroup subsys memory
[    0.008590] Initializing cgroup subsys devices
[    0.008594] Initializing cgroup subsys freezer
[    0.008598] Initializing cgroup subsys blkio
[    0.008601] Initializing cgroup subsys perf_event
[    0.008606] Initializing cgroup subsys hugetlb
[    0.008656] CPU: Physical Processor ID: 0
[    0.008660] CPU: Processor Core ID: 0
[    0.008665] mce: CPU supports 4 MCE banks
[    0.008681] CPU0: Thermal monitoring enabled (TM1)
[    0.008705] Last level iTLB entries: 4KB 128, 2MB 128, 4MB 128
[    0.008705] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64
[    0.008705] tlb_flushall_shift: 6
[    0.009219] Freeing SMP alternatives memory: 32K (c1a8e000 - c1a96000)
[    0.012781] ACPI: Core revision 20131115
[    0.015323] ACPI: All ACPI Tables successfully acquired
[    0.016022] ftrace: allocating 27783 entries in 55 pages
[    0.032180] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.036821] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.076520] smpboot: CPU0: Intel(R) Pentium(R) D CPU 2.80GHz (fam: 0f, model: 04, stepping: 07)
[    0.080000] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[    0.080000] ... version:                0
[    0.080000] ... bit width:              40
[    0.080000] ... generic registers:      18
[    0.080000] ... value mask:             000000ffffffffff
[    0.080000] ... max period:             0000007fffffffff
[    0.080000] ... fixed-purpose events:   0
[    0.080000] ... event mask:             000000000003ffff
[    0.080000] CPU 1 irqstacks, hard=f5500000 soft=f5502000
[    0.080000] x86: Booting SMP configuration:
[    0.012000] Initializing CPU#1
[    0.090359] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.080000] .... node  #0, CPUs:      #1
[    0.092065] x86: Booted up 1 node, 2 CPUs
[    0.092070] smpboot: Total of 2 processors activated (11200.64 BogoMIPS)
[    0.093453] devtmpfs: initialized
[    0.093453] EVM: security.selinux
[    0.093453] EVM: security.SMACK64
[    0.093453] EVM: security.ima
[    0.093453] EVM: security.capability
[    0.093453] PM: Registering ACPI NVS region [mem 0x5bff0000-0x5bff2fff] (12288 bytes)
[    0.096321] pinctrl core: initialized pinctrl subsystem
[    0.096462] regulator-dummy: no parameters
[    0.096518] RTC time: 13:34:30, date: 10/11/14
[    0.096588] NET: Registered protocol family 16
[    0.096849] EISA bus registered
[    0.096853] cpuidle: using governor ladder
[    0.096856] cpuidle: using governor menu
[    0.096968] ACPI: bus type PCI registered
[    0.096974] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.105116] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[    0.105122] PCI: PCI BIOS revision 2.10 entry at 0xfafd0, last bus=1
[    0.105125] PCI: Using configuration type 1 for base access
[    0.105299] mtrr: your CPUs had inconsistent fixed MTRR settings
[    0.105302] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.105304] mtrr: probably your BIOS does not setup all CPUs.
[    0.105306] mtrr: corrected configuration.
[    0.107044] bio: create slab <bio-0> at 0
[    0.107044] ACPI: Added _OSI(Module Device)
[    0.107044] ACPI: Added _OSI(Processor Device)
[    0.107044] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.107044] ACPI: Added _OSI(Processor Aggregator Device)
[    0.112865] ACPI: Interpreter enabled
[    0.112892] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[    0.112901] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131115/hwxface-580)
[    0.112921] ACPI: (supports S0 S1 S4 S5)
[    0.112925] ACPI: Using IOAPIC for interrupt routing
[    0.112979] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.113114] ACPI: No dock devices found.
[    0.120285] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.120297] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.120307] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.120435] acpi PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.120441] acpi PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.120445] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.120449] acpi PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[    0.120453] acpi PNP0A03:00: host bridge window [mem 0x5c000000-0xfebfffff] (ignored)
[    0.120456] PCI: root bus 00: using default resources
[    0.120462] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.120735] PCI host bridge to bus 0000:00
[    0.120741] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.120745] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.120749] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[    0.120773] pci 0000:00:00.0: [1106:0314] type 00 class 0x060000
[    0.120788] pci 0000:00:00.0: reg 0x10: [mem 0xd0000000-0xd7ffffff pref]
[    0.120994] pci 0000:00:00.1: [1106:1314] type 00 class 0x060000
[    0.121165] pci 0000:00:00.2: [1106:2314] type 00 class 0x060000
[    0.121333] pci 0000:00:00.3: [1106:3208] type 00 class 0x060000
[    0.121507] pci 0000:00:00.4: [1106:4314] type 00 class 0x060000
[    0.121678] pci 0000:00:00.7: [1106:7314] type 00 class 0x060000
[    0.121852] pci 0000:00:01.0: [1106:b198] type 01 class 0x060400
[    0.121922] pci 0000:00:01.0: supports D1
[    0.122071] pci 0000:00:0f.0: [1106:3149] type 00 class 0x01018f
[    0.122096] pci 0000:00:0f.0: reg 0x10: [io  0x9000-0x9007]
[    0.122110] pci 0000:00:0f.0: reg 0x14: [io  0x9400-0x9403]
[    0.122124] pci 0000:00:0f.0: reg 0x18: [io  0x9800-0x9807]
[    0.122138] pci 0000:00:0f.0: reg 0x1c: [io  0x9c00-0x9c03]
[    0.122152] pci 0000:00:0f.0: reg 0x20: [io  0xa000-0xa00f]
[    0.122166] pci 0000:00:0f.0: reg 0x24: [io  0xa400-0xa4ff]
[    0.122344] pci 0000:00:0f.1: [1106:0571] type 00 class 0x01018a
[    0.122408] pci 0000:00:0f.1: reg 0x20: [io  0xa800-0xa80f]
[    0.122602] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300
[    0.122663] pci 0000:00:10.0: reg 0x20: [io  0xac00-0xac1f]
[    0.122719] pci 0000:00:10.0: supports D1 D2
[    0.122723] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.122815] pci 0000:00:10.0: System wakeup disabled by ACPI
[    0.122887] pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300
[    0.122949] pci 0000:00:10.1: reg 0x20: [io  0xb000-0xb01f]
[    0.123004] pci 0000:00:10.1: supports D1 D2
[    0.123008] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.123098] pci 0000:00:10.1: System wakeup disabled by ACPI
[    0.123161] pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300
[    0.123223] pci 0000:00:10.2: reg 0x20: [io  0xb400-0xb41f]
[    0.123279] pci 0000:00:10.2: supports D1 D2
[    0.123283] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.123374] pci 0000:00:10.2: System wakeup disabled by ACPI
[    0.123438] pci 0000:00:10.3: [1106:3038] type 00 class 0x0c0300
[    0.123500] pci 0000:00:10.3: reg 0x20: [io  0xb800-0xb81f]
[    0.123555] pci 0000:00:10.3: supports D1 D2
[    0.123559] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.123650] pci 0000:00:10.3: System wakeup disabled by ACPI
[    0.123712] pci 0000:00:10.4: [1106:3104] type 00 class 0x0c0320
[    0.123737] pci 0000:00:10.4: reg 0x10: [mem 0xde000000-0xde0000ff]
[    0.123831] pci 0000:00:10.4: supports D1 D2
[    0.123834] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[    0.123979] pci 0000:00:11.0: [1106:3227] type 00 class 0x060100
[    0.124066] HPET not enabled in BIOS. You might try hpet=force boot option
[    0.124237] pci 0000:00:11.5: [1106:3059] type 00 class 0x040100
[    0.124262] pci 0000:00:11.5: reg 0x10: [io  0xbc00-0xbcff]
[    0.124359] pci 0000:00:11.5: supports D1 D2
[    0.124499] pci 0000:00:13.0: [10ec:8139] type 00 class 0x020000
[    0.124523] pci 0000:00:13.0: reg 0x10: [io  0xc000-0xc0ff]
[    0.124537] pci 0000:00:13.0: reg 0x14: [mem 0xde001000-0xde0010ff]
[    0.124622] pci 0000:00:13.0: supports D1 D2
[    0.124626] pci 0000:00:13.0: PME# supported from D1 D2 D3hot D3cold
[    0.124837] pci 0000:01:00.0: [1106:3344] type 00 class 0x030000
[    0.124861] pci 0000:01:00.0: reg 0x10: [mem 0xd8000000-0xdbffffff pref]
[    0.124873] pci 0000:01:00.0: reg 0x14: [mem 0xdc000000-0xdcffffff]
[    0.124917] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.124957] pci 0000:01:00.0: supports D1 D2
[    0.125045] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.125055] pci 0000:00:01.0:   bridge window [mem 0xdc000000-0xddffffff]
[    0.125062] pci 0000:00:01.0:   bridge window [mem 0xd8000000-0xdbffffff pref]
[    0.125073] pci_bus 0000:00: on NUMA node 0
[    0.125311] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
[    0.125501] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5
[    0.125697] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12)
[    0.125864] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[    0.126017] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[    0.126164] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[    0.126309] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[    0.126453] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[    0.126678] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0
[    0.126900] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0
[    0.127150] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0
[    0.127373] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled.
[    0.128240] ACPI: \_SB_.PCI0: notify handler is installed
[    0.128287] Found 1 acpi root devices
[    0.128435] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.128435] vgaarb: loaded
[    0.128435] vgaarb: bridge control possible 0000:01:00.0
[    0.128438] SCSI subsystem initialized
[    0.128503] libata version 3.00 loaded.
[    0.128503] ACPI: bus type USB registered
[    0.128503] usbcore: registered new interface driver usbfs
[    0.128503] usbcore: registered new interface driver hub
[    0.128503] usbcore: registered new device driver usb
[    0.128503] PCI: Using ACPI for IRQ routing
[    0.128503] PCI: pci_cache_line_size set to 64 bytes
[    0.128503] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    0.128503] e820: reserve RAM buffer [mem 0x5bff0000-0x5bffffff]
[    0.128503] NetLabel: Initializing
[    0.128503] NetLabel:  domain hash size = 128
[    0.128503] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.128503] NetLabel:  unlabeled traffic allowed by default
[    0.128503] Switched to clocksource refined-jiffies
[    0.144538] AppArmor: AppArmor Filesystem Enabled
[    0.144595] pnp: PnP ACPI init
[    0.144624] ACPI: bus type PNP registered
[    0.144980] system 00:00: [mem 0x000f0000-0x000f3fff] could not be reserved
[    0.144986] system 00:00: [mem 0x000f4000-0x000f7fff] could not be reserved
[    0.144991] system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.144996] system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.145001] system 00:00: [mem 0x5bff0000-0x5bffffff] could not be reserved
[    0.145006] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
[    0.145010] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.145015] system 00:00: [mem 0x00100000-0x5bfeffff] could not be reserved
[    0.145020] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.145024] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.145029] system 00:00: [mem 0xfff80000-0xfffeffff] has been reserved
[    0.145037] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.145139] system 00:01: [io  0x4000-0x407f] has been reserved
[    0.145145] system 00:01: [io  0x0500-0x050f] has been reserved
[    0.145150] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.145645] system 00:02: [io  0x04d0-0x04d1] has been reserved
[    0.145651] system 00:02: [io  0x0290-0x0294] has been reserved
[    0.145656] system 00:02: [io  0x0294-0x0297] could not be reserved
[    0.145660] system 00:02: [io  0x0880-0x088f] has been reserved
[    0.145665] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.145688] pnp 00:03: [dma 4]
[    0.145730] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.145809] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.145862] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.145921] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.146107] pnp 00:07: [dma 2]
[    0.146177] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.146500] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.146843] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.147360] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.147566] pnp 00:0b: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.147654] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.147692] pnp: PnP ACPI: found 13 devices
[    0.147696] ACPI: bus type PNP unregistered
[    0.147703] PnPBIOS: Disabled by ACPI PNP
[    0.185776] Switched to clocksource acpi_pm
[    0.185807] pci 0000:01:00.0: BAR 6: assigned [mem 0xdd000000-0xdd00ffff pref]
[    0.185813] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.185822] pci 0000:00:01.0:   bridge window [mem 0xdc000000-0xddffffff]
[    0.185829] pci 0000:00:01.0:   bridge window [mem 0xd8000000-0xdbffffff pref]
[    0.185839] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.185843] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[    0.185847] pci_bus 0000:01: resource 1 [mem 0xdc000000-0xddffffff]
[    0.185851] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xdbffffff pref]
[    0.185916] NET: Registered protocol family 2
[    0.186224] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.186260] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.186319] TCP: Hash tables configured (established 8192 bind 8192)
[    0.186387] TCP: reno registered
[    0.186392] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.186408] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.186509] NET: Registered protocol family 1
[    0.186545] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[    0.187016] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
[    0.187021] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[    0.187021] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message
[    0.187021] pci 0000:01:00.0: Boot video device
[    0.187021] PCI: CLS 32 bytes, default 64
[    0.187021] Trying to unpack rootfs image as initramfs...
[    0.237166] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1)
[    0.238378] CPU0: Core temperature/speed normal
[    0.858145] Freeing initrd memory: 18276K (f5c3e000 - f6e17000)
[    0.858483] microcode: CPU0 sig=0xf47, pf=0x10, revision=0x3
[    0.858498] microcode: CPU1 sig=0xf47, pf=0x10, revision=0x3
[    0.858612] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.858617] Scanning for low memory corruption every 60 seconds
[    0.859120] Initialise system trusted keyring
[    0.859199] audit: initializing netlink socket (disabled)
[    0.859226] type=2000 audit(1413034470.855:1): initialized
[    0.895466] bounce pool size: 64 pages
[    0.895495] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.897832] zbud: loaded
[    0.897940] VFS: Disk quotas dquot_6.5.2
[    0.898025] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.898835] fuse init (API version 7.22)
[    0.898990] msgmni has been set to 1729
[    0.899094] Key type big_key registered
[    0.899924] Key type asymmetric registered
[    0.899928] Asymmetric key parser 'x509' registered
[    0.899988] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.900072] io scheduler noop registered
[    0.900077] io scheduler deadline registered (default)
[    0.900128] io scheduler cfq registered
[    0.900334] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.900363] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.900442] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[    0.900445] vesafb: scrolling: redraw
[    0.900449] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    0.901004] vesafb: framebuffer at 0xd8000000, mapped to 0xf8480000, using 5120k, total 5120k
[    1.000661] Console: switching to colour frame buffer device 160x64
[    1.100215] fb0: VESA VGA frame buffer device
[    1.100261] ipmi message handler version 39.2
[    1.100373] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    1.100382] ACPI: Power Button [PWRB]
[    1.100467] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.100473] ACPI: Power Button [PWRF]
[    1.100658] GHES: HEST is not enabled!
[    1.100757] isapnp: Scanning for PnP cards...
[    1.100824] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.121317] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.141757] 00:09: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.143802] Linux agpgart interface v0.103
[    1.143920] agpgart: Detected VIA VT3314 chipset
[    1.151890] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
[    1.154217] brd: module loaded
[    1.155413] loop: module loaded
[    1.156214] libphy: Fixed MDIO Bus: probed
[    1.156404] tun: Universal TUN/TAP device driver, 1.6
[    1.156408] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.156478] PPP generic driver version 2.4.2
[    1.156546] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.156554] ehci-pci: EHCI PCI platform driver
[    1.156847] ehci-pci 0000:00:10.4: EHCI Host Controller
[    1.156859] ehci-pci 0000:00:10.4: new USB bus registered, assigned bus number 1
[    1.156958] ehci-pci 0000:00:10.4: irq 21, io mem 0xde000000
[    1.168048] ehci-pci 0000:00:10.4: USB 2.0 started, EHCI 1.00
[    1.168149] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.168154] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.168158] usb usb1: Product: EHCI Host Controller
[    1.168162] usb usb1: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
[    1.168165] usb usb1: SerialNumber: 0000:00:10.4
[    1.168332] hub 1-0:1.0: USB hub found
[    1.168346] hub 1-0:1.0: 8 ports detected
[    1.168660] ehci-platform: EHCI generic platform driver
[    1.168678] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.168681] ohci-pci: OHCI PCI platform driver
[    1.168702] ohci-platform: OHCI generic platform driver
[    1.168715] uhci_hcd: USB Universal Host Controller Interface driver
[    1.168942] uhci_hcd 0000:00:10.0: UHCI Host Controller
[    1.168952] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[    1.168981] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000ac00
[    1.169072] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.169077] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.169080] usb usb2: Product: UHCI Host Controller
[    1.169084] usb usb2: Manufacturer: Linux 3.13.0-32-generic uhci_hcd
[    1.169087] usb usb2: SerialNumber: 0000:00:10.0
[    1.169248] hub 2-0:1.0: USB hub found
[    1.169261] hub 2-0:1.0: 2 ports detected
[    1.169596] uhci_hcd 0000:00:10.1: UHCI Host Controller
[    1.169609] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[    1.169662] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000b000
[    1.169745] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.169749] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.169753] usb usb3: Product: UHCI Host Controller
[    1.169756] usb usb3: Manufacturer: Linux 3.13.0-32-generic uhci_hcd
[    1.169760] usb usb3: SerialNumber: 0000:00:10.1
[    1.169921] hub 3-0:1.0: USB hub found
[    1.169934] hub 3-0:1.0: 2 ports detected
[    1.170254] uhci_hcd 0000:00:10.2: UHCI Host Controller
[    1.170263] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[    1.170291] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000b400
[    1.170377] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.170382] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.170385] usb usb4: Product: UHCI Host Controller
[    1.170389] usb usb4: Manufacturer: Linux 3.13.0-32-generic uhci_hcd
[    1.170392] usb usb4: SerialNumber: 0000:00:10.2
[    1.170541] hub 4-0:1.0: USB hub found
[    1.170554] hub 4-0:1.0: 2 ports detected
[    1.170877] uhci_hcd 0000:00:10.3: UHCI Host Controller
[    1.170886] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[    1.170940] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000b800
[    1.171022] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.171026] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.171030] usb usb5: Product: UHCI Host Controller
[    1.171033] usb usb5: Manufacturer: Linux 3.13.0-32-generic uhci_hcd
[    1.171036] usb usb5: SerialNumber: 0000:00:10.3
[    1.171185] hub 5-0:1.0: USB hub found
[    1.171198] hub 5-0:1.0: 2 ports detected
[    1.171464] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.172046] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.172056] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.172241] mousedev: PS/2 mouse device common for all mice
[    1.172439] rtc_cmos 00:04: RTC can wake from S4
[    1.172636] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    1.172692] rtc_cmos 00:04: alarms up to one year, y3k, 242 bytes nvram
[    1.172827] device-mapper: uevent: version 1.0.3
[    1.172933] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    1.172970] platform eisa.0: Probing EISA bus 0
[    1.172996] platform eisa.0: Cannot allocate resource for EISA slot 4
[    1.173020] platform eisa.0: EISA: Detected 0 cards
[    1.173032] cpufreq-nforce2: No nForce2 chipset.
[    1.173039] ledtrig-cpu: registered to indicate activity on CPUs
[    1.173259] TCP: cubic registered
[    1.173436] NET: Registered protocol family 10
[    1.173738] NET: Registered protocol family 17
[    1.173762] Key type dns_resolver registered
[    1.174024] Using IPI No-Shortcut mode
[    1.174151] Loading compiled-in X.509 certificates
[    1.179040] Loaded X.509 cert 'Magrathea: Glacier signing key: a7fc6590fc4a8d859aaebda2ca5dd04716244fa0'
[    1.179064] registered taskstats version 1
[    1.183140] Key type trusted registered
[    1.186763] Key type encrypted registered
[    1.190321] AppArmor: AppArmor sha1 policy hashing enabled
[    1.190329] IMA: No TPM chip found, activating TPM-bypass!
[    1.190622] regulator-dummy: disabling
[    1.190701]   Magic number: 2:259:584
[    1.190832] rtc_cmos 00:04: setting system clock to 2014-10-11 13:34:31 UTC (1413034471)
[    1.190936] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.190939] EDD information not available.
[    1.190985] PM: Hibernation image not present or could not be loaded.
[    1.193752] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    1.411597] isapnp: No Plug & Play device found
[    1.412648] Freeing unused kernel memory: 872K (c19b4000 - c1a8e000)
[    1.412726] Write protecting the kernel text: 6532k
[    1.412887] Write protecting the kernel read-only data: 2764k
[    1.412890] NX-protecting the kernel data: 5756k
[    1.437821] systemd-udevd[95]: starting version 204
[    1.480568] usb 1-2: new high-speed USB device number 2 using ehci-pci
[    1.488798] pata_via 0000:00:0f.1: version 0.3.4
[    1.489299] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
[    1.489303] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[    1.492054] scsi0 : pata_via
[    1.496048] scsi1 : pata_via
[    1.496136] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xa800 irq 14
[    1.496141] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xa808 irq 15
[    1.517339] sata_via 0000:00:0f.0: version 2.6
[    1.517636] sata_via 0000:00:0f.0: routed to hard irq line 11
[    1.524470] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    1.524879] Floppy drive(s): fd0 is 1.44M
[    1.524988] scsi2 : sata_via
[    1.528132] scsi3 : sata_via
[    1.528251] ata3: SATA max UDMA/133 cmd 0x9000 ctl 0x9400 bmdma 0xa000 irq 20
[    1.528256] ata4: SATA max UDMA/133 cmd 0x9800 ctl 0x9c00 bmdma 0xa008 irq 20
[    1.528346] 8139cp 0000:00:13.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[    1.562446] 8139too: 8139too Fast Ethernet driver 0.9.28
[    1.563404] 8139too 0000:00:13.0 eth0: RealTek RTL8139 at 0x0001c000, 00:16:e6:69:88:ca, IRQ 18
[    1.575773] FDC 0 is a post-1991 82077
[    1.617675] usb 1-2: New USB device found, idVendor=2357, idProduct=0100
[    1.617683] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.617687] usb 1-2: Product: 802.11n WLAN Adapter
[    1.617691] usb 1-2: Manufacturer: Realtek
[    1.617694] usb 1-2: SerialNumber: 00e04c000001
[    1.660977] ata1.00: ATAPI: IDE-DVD DVDRW8801, 2X16, max UDMA/33
[    1.676705] ata1.00: configured for UDMA/33
[    1.682569] scsi 0:0:0:0: CD-ROM            IDE-DVD  DVDRW8801        2X16 PQ: 0 ANSI: 5
[    1.686300] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[    1.686305] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.686501] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.686694] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.728047] usb 1-4: new high-speed USB device number 3 using ehci-pci
[    1.732027] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.856024] tsc: Refined TSC clocksource calibration: 2800.098 MHz
[    1.873079] usb 1-4: New USB device found, idVendor=04e8, idProduct=685e
[    1.873084] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.873088] usb 1-4: Product: BCM21553-Thunderbird
[    1.873092] usb 1-4: Manufacturer: Broadcom
[    1.873095] usb 1-4: SerialNumber: 0123456789ABCDEF
[    1.891920] usb-storage 1-4:1.0: USB Mass Storage device detected
[    1.892163] scsi4 : usb-storage 1-4:1.0
[    1.892319] usbcore: registered new interface driver usb-storage
[    1.896352] ata3.00: HPA detected: current 156299375, native 156301488
[    1.896362] ata3.00: ATA-7: SAMSUNG HD080HJ, ZH100-41, max UDMA7
[    1.896367] ata3.00: 156299375 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.929070] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[    1.936345] ata3.00: configured for UDMA/133
[    1.936539] scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HD080HJ  ZH10 PQ: 0 ANSI: 5
[    1.936819] sd 2:0:0:0: [sda] 156299375 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    1.936856] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    1.936925] sd 2:0:0:0: [sda] Write Protect is off
[    1.936931] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.936982] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.985561]  sda: sda1 sda2 < sda5 sda6 sda7 >
[    1.986195] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.140027] ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[    2.709965] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
[    2.856159] Switched to clocksource tsc
[    2.869477] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[    2.892752] scsi 4:0:0:0: Direct-Access     SAMSUNG  S5830i Card      0000 PQ: 0 ANSI: 2
[    2.893162] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    2.894479] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    3.419233] random: init urandom read with 103 bits of entropy available
[    4.006160] random: nonblocking pool is initialized
[   10.969513] Adding 1505276k swap on /dev/sda6.  Priority:-1 extents:1 across:1505276k FS
[   11.070803] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.217870] systemd-udevd[269]: starting version 204
[   11.350455] lp: driver loaded but no devices found
[   11.375194] ppdev: user-space parallel port driver
[   11.386794] parport_pc 00:0a: reported by Plug and Play ACPI
[   11.386861] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   11.469192] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   11.484729] lp0: using parport0 (interrupt-driven).
[   11.845038] type=1400 audit(1413023682.152:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=333 comm="apparmor_parser"
[   11.845048] type=1400 audit(1413023682.152:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=333 comm="apparmor_parser"
[   11.845054] type=1400 audit(1413023682.152:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=333 comm="apparmor_parser"
[   11.845883] type=1400 audit(1413023682.152:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=333 comm="apparmor_parser"
[   11.845891] type=1400 audit(1413023682.152:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=333 comm="apparmor_parser"
[   11.846286] type=1400 audit(1413023682.152:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=333 comm="apparmor_parser"
[   11.869483] type=1400 audit(1413023682.176:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=343 comm="apparmor_parser"
[   11.869503] type=1400 audit(1413023682.176:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=343 comm="apparmor_parser"
[   11.869514] type=1400 audit(1413023682.176:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=343 comm="apparmor_parser"
[   11.870358] type=1400 audit(1413023682.176:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=343 comm="apparmor_parser"
[   12.125747] cdc_acm 1-4:1.1: This device cannot do calls on its own. It is not a modem.
[   12.189740] cdc_acm 1-4:1.1: ttyACM0: USB ACM device
[   12.195248] usbcore: registered new interface driver cdc_acm
[   12.195257] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   12.327752] cfg80211: Calling CRDA to update world regulatory domain
[   12.429475] cfg80211: World regulatory domain updated:
[   12.429484] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   12.429488] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.429491] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.429494] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.429498] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.429501] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.512711] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
[   12.512717] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[   12.560134] rtl8192cu: Chip version 0x11
[   12.642154] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
[   12.646895] rtl8192cu: MAC address: f8:1a:67:23:93:fb
[   12.646902] rtl8192cu: Board Type 0
[   12.647140] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
[   12.647203] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
[   12.648134] usbcore: registered new interface driver rtl8192cu
[   12.733567] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[   12.740672] rtlwifi: wireless switch is on
[   13.245387] init: failsafe main process (535) killed by TERM signal
[   13.495712] init: udev-fallback-graphics main process (566) terminated with status 1
[   13.932852] Bluetooth: Core ver 2.17
[   13.932912] NET: Registered protocol family 31
[   13.932916] Bluetooth: HCI device and connection manager initialized
[   13.933907] Bluetooth: HCI socket layer initialized
[   13.933916] Bluetooth: L2CAP socket layer initialized
[   13.933931] Bluetooth: SCO socket layer initialized
[   13.999948] Bluetooth: RFCOMM TTY layer initialized
[   13.999970] Bluetooth: RFCOMM socket layer initialized
[   13.999983] Bluetooth: RFCOMM ver 1.11
[   14.015653] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   14.015660] Bluetooth: BNEP filters: protocol multicast
[   14.015675] Bluetooth: BNEP socket layer initialized
[   15.187487] rtl8192cu: MAC auto ON okay!
[   15.220491] rtl8192cu: Tx queue select: 0x05
[   15.595257] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   15.596160] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   15.600515] 8139too 0000:00:13.0 eth0: link down
[   15.600591] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.601245] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.021249] init: plymouth-upstart-bridge main process ended, respawning
[   18.041655] init: plymouth-upstart-bridge main process (1046) killed by TERM signal
[   43.210737] CPU1: Core temperature above threshold, cpu clock throttled (total events = 1)
[   43.213090] CPU1: Core temperature/speed normal
[  299.988015] mce: [Hardware Error]: Machine check events logged
[  682.077290] sr 0:0:0:0: [sr0]  
[  682.077298] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  682.077303] sr 0:0:0:0: [sr0]  
[  682.077306] Sense Key : Illegal Request [current]
[  682.077312] sr 0:0:0:0: [sr0]  
[  682.077317] Add. Sense: Logical block address out of range
[  682.077322] sr 0:0:0:0: [sr0] CDB:
[  682.077324] Read(10): 28 00 00 00 00 00 00 00 01 00
[  682.077340] end_request: I/O error, dev sr0, sector 0
[  682.077346] quiet_error: 126 callbacks suppressed
[  682.077350] Buffer I/O error on device sr0, logical block 0
[  682.080174] sr 0:0:0:0: [sr0]  
[  682.080178] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  682.080182] sr 0:0:0:0: [sr0]  
[  682.080185] Sense Key : Illegal Request [current]
[  682.080190] sr 0:0:0:0: [sr0]  
[  682.080194] Add. Sense: Logical block address out of range
[  682.080198] sr 0:0:0:0: [sr0] CDB:
[  682.080200] Read(10): 28 00 00 00 00 00 00 00 01 00
[  682.080214] end_request: I/O error, dev sr0, sector 0
[  682.080218] Buffer I/O error on device sr0, logical block 0
[  682.082830] sr 0:0:0:0: [sr0]  
[  682.082834] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  682.082838] sr 0:0:0:0: [sr0]  
[  682.082840] Sense Key : Illegal Request [current]
[  682.082845] sr 0:0:0:0: [sr0]  
[  682.082849] Add. Sense: Logical block address out of range
[  682.082853] sr 0:0:0:0: [sr0] CDB:
[  682.082855] Read(10): 28 00 00 00 00 00 00 00 01 00
[  682.082869] end_request: I/O error, dev sr0, sector 0
[  682.082872] Buffer I/O error on device sr0, logical block 0
[  682.085746] sr 0:0:0:0: [sr0]  
[  682.085750] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  682.085754] sr 0:0:0:0: [sr0]  
[  682.085756] Sense Key : Illegal Request [current]
[  682.085761] sr 0:0:0:0: [sr0]  
[  682.085765] Add. Sense: Logical block address out of range
[  682.085769] sr 0:0:0:0: [sr0] CDB:
[  682.085772] Read(10): 28 00 00 00 00 00 00 00 01 00
[  682.085785] end_request: I/O error, dev sr0, sector 0
[  682.085789] Buffer I/O error on device sr0, logical block 0
[  682.088441] sr 0:0:0:0: [sr0]  
[  682.088445] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  682.088449] sr 0:0:0:0: [sr0]  
[  682.088451] Sense Key : Illegal Request [current]
[  682.088457] sr 0:0:0:0: [sr0]  
[  682.088461] Add. Sense: Logical block address out of range
[  682.088465] sr 0:0:0:0: [sr0] CDB:
[  682.088467] Read(10): 28 00 00 00 00 00 00 00 01 00
[  682.088481] end_request: I/O error, dev sr0, sector 0
[  682.088485] Buffer I/O error on device sr0, logical block 0
[  682.091349] sr 0:0:0:0: [sr0]  
[  682.091353] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  682.091357] sr 0:0:0:0: [sr0]  
[  682.091359] Sense Key : Illegal Request [current]
[  682.091364] sr 0:0:0:0: [sr0]  
[  682.091368] Add. Sense: Logical block address out of range
[  682.091372] sr 0:0:0:0: [sr0] CDB:
[  682.091375] Read(10): 28 00 00 00 00 00 00 00 01 00
[  682.091388] end_request: I/O error, dev sr0, sector 0
[  682.091392] Buffer I/O error on device sr0, logical block 0
[  682.094263] sr 0:0:0:0: [sr0]  
[  682.094268] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  682.094271] sr 0:0:0:0: [sr0]  
[  682.094274] Sense Key : Illegal Request [current]
[  682.094279] sr 0:0:0:0: [sr0]  
[  682.094283] Add. Sense: Logical block address out of range
[  682.094287] sr 0:0:0:0: [sr0] CDB:
[  682.094289] Read(10): 28 00 00 00 00 00 00 00 01 00
[  682.094302] end_request: I/O error, dev sr0, sector 0
[  682.094306] Buffer I/O error on device sr0, logical block 0
[  682.096947] sr 0:0:0:0: [sr0]  
[  682.096951] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  682.096955] sr 0:0:0:0: [sr0]  
[  682.096957] Sense Key : Illegal Request [current]
[  682.096962] sr 0:0:0:0: [sr0]  
[  682.096966] Add. Sense: Logical block address out of range
[  682.096970] sr 0:0:0:0: [sr0] CDB:
[  682.096973] Read(10): 28 00 00 00 00 00 00 00 01 00
[  682.096986] end_request: I/O error, dev sr0, sector 0
[  682.096990] Buffer I/O error on device sr0, logical block 0
[  682.099928] sr 0:0:0:0: [sr0]  
[  682.099932] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  682.099935] sr 0:0:0:0: [sr0]  
[  682.099938] Sense Key : Illegal Request [current]
[  682.099943] sr 0:0:0:0: [sr0]  
[  682.099947] Add. Sense: Logical block address out of range
[  682.099951] sr 0:0:0:0: [sr0] CDB:
[  682.099953] Read(10): 28 00 00 00 00 00 00 00 01 00
[  682.099966] end_request: I/O error, dev sr0, sector 0
[  682.099970] Buffer I/O error on device sr0, logical block 0
[  682.102730] sr 0:0:0:0: [sr0]  
[  682.102735] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  682.102738] sr 0:0:0:0: [sr0]  
[  682.102741] Sense Key : Illegal Request [current]
[  682.102746] sr 0:0:0:0: [sr0]  
[  682.102750] Add. Sense: Logical block address out of range
[  682.102754] sr 0:0:0:0: [sr0] CDB:
[  682.102756] Read(10): 28 00 00 00 00 00 00 00 01 00
[  682.102769] end_request: I/O error, dev sr0, sector 0
[  682.102773] Buffer I/O error on device sr0, logical block 0
[  682.105613] sr 0:0:0:0: [sr0]  
[  682.105618] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  682.105621] sr 0:0:0:0: [sr0]  
[  682.105624] Sense Key : Illegal Request [current]
[  682.105629] sr 0:0:0:0: [sr0]  
[  682.105633] Add. Sense: Logical block address out of range
[  682.105637] sr 0:0:0:0: [sr0] CDB:
[  682.105639] Read(10): 28 00 00 00 00 00 00 00 01 00
[  682.108259] sr 0:0:0:0: [sr0]  
[  682.108264] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  682.108267] sr 0:0:0:0: [sr0]  
[  682.108270] Sense Key : Illegal Request [current]
[  682.108275] sr 0:0:0:0: [sr0]  
[  682.108279] Add. Sense: Logical block address out of range
[  682.108283] sr 0:0:0:0: [sr0] CDB:
[  682.108285] Read(10): 28 00 00 00 00 00 00 00 01 00
[  682.111121] sr 0:0:0:0: [sr0]  
[  682.111125] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  682.111129] sr 0:0:0:0: [sr0]  
[  682.111131] Sense Key : Illegal Request [current]
[  682.111136] sr 0:0:0:0: [sr0]  
[  682.111140] Add. Sense: Logical block address out of range
[  682.111144] sr 0:0:0:0: [sr0] CDB:
[  682.111146] Read(10): 28 00 00 00 00 00 00 00 01 00

dmesg | tail

Kod Seç Genişlet

[  682.108283] sr 0:0:0:0: [sr0] CDB:
[  682.108285] Read(10): 28 00 00 00 00 00 00 00 01 00
[  682.111121] sr 0:0:0:0: [sr0]  
[  682.111125] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  682.111129] sr 0:0:0:0: [sr0]  
[  682.111131] Sense Key : Illegal Request [current]
[  682.111136] sr 0:0:0:0: [sr0]  
[  682.111140] Add. Sense: Logical block address out of range
[  682.111144] sr 0:0:0:0: [sr0] CDB:
[  682.111146] Read(10): 28 00 00 00 00 00 00 00 01 00

çıktılar bu şekilde.

[Yavuz4LP]

Anladığım kadarıyla bu sürücü(rtl8192cu) 14.04.1 LTS sürümüne henüz port edilmemiş ya da ben beceremedim,bu gün tekrardan Xubuntu 14.04 kurdum ve sürücüleri sorunsuz kuruldu fakat tekrardan parola yanlış hatası almaya başladım ve şifre gayet basit olmasına rağmen hata veriyor.Ayrıca WEP'e çeviremem,modemin bulunduğu komşum evde değil.

[heartsmagic]

Benim istediğim çıktılar bunlar değildi. Baktın mı ilgili iletiye? Orada bir çözüm var, iş görmüyor denmiş. Onu denediysen aynı adımların çıktısını istemiştim. 14.04 ile 14.04.1 arasında çok fazla fark yok. Eğer yeni çekirdeklerde sorun varsa en azından onları görmek için çözüm adımında tarif edilen şeyi denemek lazım.