Everest EWN-813N Sürücü Güncelleme Sorunu

[mustineo]

Merhaba,
Öncelikle ağ ile ilgili çıktılarım bu şekilde:

Kod Seç Genişlet

~ $ cat /etc/lsb-release
DISTRIB_ID=LinuxMint
DISTRIB_RELEASE=13
DISTRIB_CODENAME=maya
DISTRIB_DESCRIPTION="Linux Mint 13 Maya"

Kod Seç Genişlet

~ $ uname -a
Linux toplama 3.17.1-031701-generic #201410150735 SMP Wed Oct 15 11:36:31 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux


Kod Seç Genişlet

~ $ lspci
00:00.0 RAM memory: NVIDIA Corporation MCP61 Host Bridge (rev a1)
00:01.0 ISA bridge: NVIDIA Corporation MCP61 LPC Bridge (rev a2)
00:01.1 SMBus: NVIDIA Corporation MCP61 SMBus (rev a2)
00:01.2 RAM memory: NVIDIA Corporation MCP61 Memory Controller (rev a2)
00:02.0 USB controller: NVIDIA Corporation MCP61 USB 1.1 Controller (rev a3)
00:02.1 USB controller: NVIDIA Corporation MCP61 USB 2.0 Controller (rev a3)
00:04.0 PCI bridge: NVIDIA Corporation MCP61 PCI bridge (rev a1)
00:05.0 Audio device: NVIDIA Corporation MCP61 High Definition Audio (rev a2)
00:06.0 IDE interface: NVIDIA Corporation MCP61 IDE (rev a2)
00:07.0 Bridge: NVIDIA Corporation MCP61 Ethernet (rev a2)
00:08.0 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2)
00:08.1 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2)
00:09.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2)
00:0b.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2)
00:0c.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control
02:00.0 VGA compatible controller: NVIDIA Corporation G96 [GeForce 9500 GT] (rev a1)


Kod Seç Genişlet

lsusb
Bus 001 Device 002: ID 046d:0802 Logitech, Inc. Webcam C200
Bus 001 Device 004: ID 148f:5572 Ralink Technology, Corp.
Bus 002 Device 002: ID 046d:c52e Logitech, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


Kod Seç Genişlet

~ $ rfkill list
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no


Kod Seç Genişlet

~ $ sudo lshw -C network
  *-network               
       açıklama: Kablosuz arayüz
       physical id: 1
       bus info: usb@1:4
       mantıksal ad: wlan2
       serial: 00:87:34:40:38:27
       kapasiteler: eternet physical wireless
       yapılandırma: broadcast=yes driver=rt2800usb driverversion=3.17.1-031701-generic firmware=0.22 link=no multicast=yes wireless=IEEE 802.11abgn


Kod Seç Genişlet

~ $ ifconfig
eth0      Link encap:Ethernet  HWaddr e0:cb:4e:cb:eb:01 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Sunucu
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:392 errors:0 dropped:0 overruns:0 frame:0
          TX packets:392 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:36960 (36.9 KB)  TX bytes:36960 (36.9 KB)

wlan2     Link encap:Ethernet  HWaddr 00:87:34:40:38:27 
          inet6 addr: fe80::287:34ff:fe40:3827/64 Scope:Link
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:1408 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1810 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:572448 (572.4 KB)  TX bytes:358275 (358.2 KB)


Kod Seç Genişlet

~ $ iwconfig
eth0      no wireless extensions.

wlan2     IEEE 802.11abgn  ESSID:off/any 
          Mode:Managed  Access Point: Not-Associated   Tx-Power=20 dBm   
          Retry short limit:7   RTS thr:off   Fragment thr:off
          Power Management:off
         
lo        no wireless extensions.


Kod Seç Genişlet

~ $ iwlist scanning
eth0      Interface doesn't support scanning.

wlan2     No scan results

lo        Interface doesn't support scanning.

Kod Seç Genişlet

~ $ lsmod
Module                  Size  Used by
ctr                    13193  0
ccm                    17856  0
rfcomm                 75114  0
bnep                   19884  2
bluetooth             477455  10 rfcomm,bnep
binfmt_misc            17508  1
snd_hda_codec_via      32006  1
snd_hda_codec_generic    70087  1 snd_hda_codec_via
arc4                   12573  2
nouveau              1321761  3
snd_hda_intel          30783  3
rt2800usb              27380  0
snd_hda_controller     32234  1 snd_hda_intel
rt2800lib              95583  1 rt2800usb
snd_hda_codec         145035  4 snd_hda_codec_via,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
crc_ccitt              12707  1 rt2800lib
snd_usb_audio         164122  1
rt2x00usb              20886  1 rt2800usb
ttm                    90376  1 nouveau
snd_usbmidi_lib        30597  1 snd_usb_audio
snd_pcm               105052  4 snd_hda_intel,snd_hda_controller,snd_hda_codec,snd_usb_audio
rt2x00lib              56113  3 rt2800usb,rt2800lib,rt2x00usb
snd_hwdep              17709  2 snd_hda_codec,snd_usb_audio
drm_kms_helper         99872  1 nouveau
snd_seq_midi           13564  0
mac80211              696913  3 rt2800lib,rt2x00usb,rt2x00lib
snd_rawmidi            31197  2 snd_usbmidi_lib,snd_seq_midi
drm                   318542  6 nouveau,ttm,drm_kms_helper
snd_seq_midi_event     14899  1 snd_seq_midi
snd_seq                63540  2 snd_seq_midi,snd_seq_midi_event
uvcvideo               86628  0
snd_timer              30118  2 snd_pcm,snd_seq
snd_seq_device         14497  3 snd_seq_midi,snd_rawmidi,snd_seq
cfg80211              514757  2 rt2x00lib,mac80211
i2c_algo_bit           13564  1 nouveau
videobuf2_core         59907  1 uvcvideo
v4l2_common            15715  1 videobuf2_core
mxm_wmi                13021  1 nouveau
i2c_nforce2            13317  0
videodev              163831  3 uvcvideo,videobuf2_core,v4l2_common
psmouse               118039  0
video                  20569  1 nouveau
snd                    84025  20 snd_hda_codec_via,snd_hda_codec_generic,snd_hda_intel,snd_hda_codec,snd_usb_audio,snd_usbmidi_lib,snd_pcm,snd_hwdep,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
edac_core              52405  0
media                  22008  2 uvcvideo,videodev
edac_mce_amd           22800  0
videobuf2_vmalloc      13216  1 uvcvideo
wmi                    19379  2 nouveau,mxm_wmi
soundcore              15091  2 snd_hda_codec,snd
ppdev                  17711  0
videobuf2_memops       13362  1 videobuf2_vmalloc
joydev                 17587  0
asus_atk0110           19219  0
k10temp                13191  0
mac_hid                13275  0
parport_pc             32906  1
serio_raw              13483  0
lp                     17799  0
parport                42481  3 ppdev,parport_pc,lp
hid_generic            12559  0
usbhid                 53122  0
hid                   110572  2 hid_generic,usbhid
pata_acpi              13053  0
pata_amd               18230  0
forcedeth              72441  0
sata_nv                32309  2


Kod Seç Genişlet

~ $ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.17.1-031701-generic (apw@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201410150735 SMP Wed Oct 15 11:36:31 UTC 2014
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.17.1-031701-generic root=UUID=b897d510-aa41-47d4-87e2-5b537d4e6845 ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] tseg: 0000000000
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009b3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009b400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e2000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bffa0000-0x00000000bffb7fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bffb8000-0x00000000bffdffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bffe0000-0x00000000bffedfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bfff0000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: System manufacturer System Product Name/M4N68T-M, BIOS 1301    07/05/2011
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000140000000 aka 5120M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xbffa0 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000095000] 95000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01fc8000, 0x01fc8fff] PGTABLE
[    0.000000] BRK [0x01fc9000, 0x01fc9fff] PGTABLE
[    0.000000] BRK [0x01fca000, 0x01fcafff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
[    0.000000]  [mem 0x13fe00000-0x13fffffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
[    0.000000]  [mem 0x13c000000-0x13fdfffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]
[    0.000000]  [mem 0x100000000-0x13bffffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x00100000-0xbff9ffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
[    0.000000]  [mem 0x80000000-0xbfdfffff] page 2M
[    0.000000]  [mem 0xbfe00000-0xbff9ffff] page 4k
[    0.000000] RAMDISK: [mem 0x35fbe000-0x36fd6fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FB6D0 000024 (v02 ACPIAM)
[    0.000000] ACPI: XSDT 0x00000000BFFA0100 00005C (v01 070511 XSDT1819 20110705 MSFT 00000097)
[    0.000000] ACPI: FACP 0x00000000BFFA0290 0000F4 (v03 070511 FACP1819 20110705 MSFT 00000097)
[    0.000000] ACPI: DSDT 0x00000000BFFA0460 007A0A (v01 A1533  A1533000 00000000 INTL 20060113)
[    0.000000] ACPI: FACS 0x00000000BFFB8000 000040
[    0.000000] ACPI: APIC 0x00000000BFFA0390 000090 (v01 070511 APIC1819 20110705 MSFT 00000097)
[    0.000000] ACPI: MCFG 0x00000000BFFA0420 00003C (v01 070511 OEMMCFG  20110705 MSFT 00000097)
[    0.000000] ACPI: OEMB 0x00000000BFFB8040 000071 (v01 070511 OEMB1819 20110705 MSFT 00000097)
[    0.000000] ACPI: SRAT 0x00000000BFFA7E70 0000C8 (v01 AMD    FAM_F_10 00000002 AMD  00000001)
[    0.000000] ACPI: HPET 0x00000000BFFA7F40 000038 (v01 070511 OEMHPET0 20110705 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x00000000BFFA7F80 000458 (v01 A M I  POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
[    0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff]
[    0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0x00000000-0x13fffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[    0.000000]   NODE_DATA [mem 0x13fff9000-0x13fffdfff]
[    0.000000]  [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x13fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009afff]
[    0.000000]   node   0: [mem 0x00100000-0xbff9ffff]
[    0.000000]   node   0: [mem 0x100000000-0x13fffffff]
[    0.000000] On node 0 totalpages: 1048378
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3994 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12223 pages used for memmap
[    0.000000]   DMA32 zone: 782240 pages, LIFO batch:31
[    0.000000]   Normal zone: 4096 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x508
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] smpboot: Allowing 6 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009bfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e1fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e2000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbffa0000-0xbffb7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbffb8000-0xbffdffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbffe0000-0xbffedfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbffee000-0xbffeffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfff0000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
[    0.000000] e820: [mem 0xc0000000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:6 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88013fc00000 s86720 r8192 d23872 u262144
[    0.000000] pcpu-alloc: s86720 r8192 d23872 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1031974
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.17.1-031701-generic root=UUID=b897d510-aa41-47d4-87e2-5b537d4e6845 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0xfddc000000-0xfdddffffff] (32MB)
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
[    0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[    0.000000] AGP: This costs you 64MB of RAM
[    0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
[    0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
[    0.000000] Memory: 3962664K/4193512K available (7846K kernel code, 1145K rwdata, 3772K rodata, 1376K init, 1308K bss, 230848K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
[    0.000000] Offload RCU callbacks from all CPUs
[    0.000000] Offload RCU callbacks from CPUs: 0-5.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[    0.000000] NR_IRQS:16640 nr_irqs:472 0
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 16777216 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3013.810 MHz processor
[    0.000029] Calibrating delay loop (skipped), value calculated using timer frequency.. 6027.62 BogoMIPS (lpj=12055240)
[    0.000032] pid_max: default: 32768 minimum: 301
[    0.000039] ACPI: Core revision 20140724
[    0.003781] ACPI: All ACPI Tables successfully acquired
[    0.004190] Security Framework initialized
[    0.004200] AppArmor: AppArmor initialized
[    0.004201] Yama: becoming mindful.
[    0.004468] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.005900] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.006571] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.006578] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.006805] Initializing cgroup subsys memory
[    0.006811] Initializing cgroup subsys devices
[    0.006814] Initializing cgroup subsys freezer
[    0.006817] Initializing cgroup subsys net_cls
[    0.006819] Initializing cgroup subsys blkio
[    0.006821] Initializing cgroup subsys perf_event
[    0.006823] Initializing cgroup subsys net_prio
[    0.006826] Initializing cgroup subsys hugetlb
[    0.006846] CPU: Physical Processor ID: 0
[    0.006846] CPU: Processor Core ID: 0
[    0.006848] mce: CPU supports 6 MCE banks
[    0.006853] LVT offset 0 assigned for vector 0xf9
[    0.006858] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[    0.006858] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
[    0.006940] Freeing SMP alternatives memory: 28K (ffffffff81e78000 - ffffffff81e7f000)
[    0.007604] ftrace: allocating 32231 entries in 126 pages
[    0.019615] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.059328] smpboot: CPU0: AMD Athlon(tm) II X2 250 Processor (fam: 10, model: 06, stepping: 02)
[    0.165924] Performance Events: AMD PMU driver.
[    0.165928] ... version:                0
[    0.165929] ... bit width:              48
[    0.165930] ... generic registers:      4
[    0.165931] ... value mask:             0000ffffffffffff
[    0.165932] ... max period:             00007fffffffffff
[    0.165932] ... fixed-purpose events:   0
[    0.165933] ... event mask:             000000000000000f
[    0.167313] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.167393] x86: Booting SMP configuration:
[    0.167394] .... node  #0, CPUs:      #1
[    0.180458] x86: Booted up 1 node, 2 CPUs
[    0.180460] smpboot: Total of 2 processors activated (12055.24 BogoMIPS)
[    0.181079] devtmpfs: initialized
[    0.184949] evm: security.selinux
[    0.184951] evm: security.SMACK64
[    0.184952] evm: security.SMACK64EXEC
[    0.184952] evm: security.SMACK64TRANSMUTE
[    0.184953] evm: security.SMACK64MMAP
[    0.184954] evm: security.ima
[    0.184955] evm: security.capability
[    0.185028] PM: Registering ACPI NVS region [mem 0xbffb8000-0xbffdffff] (163840 bytes)
[    0.185948] pinctrl core: initialized pinctrl subsystem
[    0.186027] regulator-dummy: no parameters
[    0.186066] RTC time:  6:32:06, date: 10/25/14
[    0.186143] NET: Registered protocol family 16
[    0.186284] cpuidle: using governor ladder
[    0.186287] cpuidle: using governor menu
[    0.186295] node 0 link 0: io port [1000, ffffff]
[    0.186297] TOM: 00000000c0000000 aka 3072M
[    0.186299] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[    0.186300] node 0 link 0: mmio [e0000000, efffffff] ==> none
[    0.186303] node 0 link 0: mmio [a0000, bffff]
[    0.186304] node 0 link 0: mmio [c0000000, fe0bffff] ==> [c0000000, dfffffff] and [f0000000, fe0bffff]
[    0.186307] TOM2: 0000000140000000 aka 5120M
[    0.186309] bus: [bus 00-07] on node 0 link 0
[    0.186310] bus: 00 [io  0x0000-0xffff]
[    0.186311] bus: 00 [mem 0x000a0000-0x000bffff]
[    0.186312] bus: 00 [mem 0xc0000000-0xdfffffff]
[    0.186313] bus: 00 [mem 0xf0000000-0xffffffff]
[    0.186314] bus: 00 [mem 0x140000000-0xfcffffffff]
[    0.186369] ACPI: bus type PCI registered
[    0.186371] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.186433] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.186435] PCI: not using MMCONFIG
[    0.186436] PCI: Using configuration type 1 for base access
[    0.186437] PCI: Using configuration type 1 for extended access
[    0.193058] ACPI: Added _OSI(Module Device)
[    0.193062] ACPI: Added _OSI(Processor Device)
[    0.193063] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.193064] ACPI: Added _OSI(Processor Aggregator Device)
[    0.194852] ACPI: Executed 1 blocks of module-level executable AML code
[    0.262449] ACPI: Interpreter enabled
[    0.262461] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
[    0.262472] ACPI: (supports S0 S1 S3 S4 S5)
[    0.262474] ACPI: Using IOAPIC for interrupt routing
[    0.262492] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.263610] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.263979] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.268222] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.268227] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.268352] acpi PNP0A03:00: _OSC: platform does not support [PCIeHotplug PCIeCapability]
[    0.268408] acpi PNP0A03:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[    0.268411] acpi PNP0A03:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[    0.268413] acpi PNP0A03:00: _OSC: platform willing to grant [PME AER]
[    0.268414] acpi PNP0A03:00: _OSC failed (AE_SUPPORT); disabling ASPM
[    0.268601] PCI host bridge to bus 0000:00
[    0.268604] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.268606] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.268607] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.268609] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.268611] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[    0.268612] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
[    0.268614] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
[    0.268634] pci 0000:00:00.0: [10de:03e2] type 00 class 0x050000
[    0.268834] pci 0000:00:01.0: [10de:03e1] type 00 class 0x060100
[    0.268840] pci 0000:00:01.0: reg 0x10: [io  0x0900-0x09ff]
[    0.268907] pci 0000:00:01.1: [10de:03eb] type 00 class 0x0c0500
[    0.268917] pci 0000:00:01.1: reg 0x10: [io  0x0e00-0x0e3f]
[    0.268930] pci 0000:00:01.1: reg 0x20: [io  0x0600-0x063f]
[    0.268935] pci 0000:00:01.1: reg 0x24: [io  0x0700-0x073f]
[    0.268961] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.268986] pci 0000:00:01.1: System wakeup disabled by ACPI
[    0.269016] pci 0000:00:01.2: [10de:03f5] type 00 class 0x050000
[    0.269079] pci 0000:00:02.0: [10de:03f1] type 00 class 0x0c0310
[    0.269087] pci 0000:00:02.0: reg 0x10: [mem 0xdbffb000-0xdbffbfff]
[    0.269117] pci 0000:00:02.0: supports D1 D2
[    0.269119] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.269138] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.269172] pci 0000:00:02.1: [10de:03f2] type 00 class 0x0c0320
[    0.269181] pci 0000:00:02.1: reg 0x10: [mem 0xdbffac00-0xdbffacff]
[    0.269218] pci 0000:00:02.1: supports D1 D2
[    0.269219] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.269240] pci 0000:00:02.1: System wakeup disabled by ACPI
[    0.269279] pci 0000:00:04.0: [10de:03f3] type 01 class 0x060401
[    0.269321] pci 0000:00:04.0: System wakeup disabled by ACPI
[    0.269354] pci 0000:00:05.0: [10de:03f0] type 00 class 0x040300
[    0.269363] pci 0000:00:05.0: reg 0x10: [mem 0xdbff4000-0xdbff7fff]
[    0.269400] pci 0000:00:05.0: PME# supported from D3hot D3cold
[    0.269421] pci 0000:00:05.0: System wakeup disabled by ACPI
[    0.269458] pci 0000:00:06.0: [10de:03ec] type 00 class 0x01018a
[    0.269477] pci 0000:00:06.0: reg 0x20: [io  0xffa0-0xffaf]
[    0.269486] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.269487] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.269489] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.269490] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.269543] pci 0000:00:07.0: [10de:03ef] type 00 class 0x068000
[    0.269552] pci 0000:00:07.0: reg 0x10: [mem 0xdbff9000-0xdbff9fff]
[    0.269556] pci 0000:00:07.0: reg 0x14: [io  0xd480-0xd487]
[    0.269586] pci 0000:00:07.0: supports D1 D2
[    0.269587] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.269611] pci 0000:00:07.0: System wakeup disabled by ACPI
[    0.269643] pci 0000:00:08.0: [10de:03f6] type 00 class 0x010185
[    0.269650] pci 0000:00:08.0: reg 0x10: [io  0xd400-0xd407]
[    0.269654] pci 0000:00:08.0: reg 0x14: [io  0xd080-0xd083]
[    0.269657] pci 0000:00:08.0: reg 0x18: [io  0xd000-0xd007]
[    0.269661] pci 0000:00:08.0: reg 0x1c: [io  0xcc00-0xcc03]
[    0.269664] pci 0000:00:08.0: reg 0x20: [io  0xc880-0xc88f]
[    0.269668] pci 0000:00:08.0: reg 0x24: [mem 0xdbff8000-0xdbff8fff]
[    0.269725] pci 0000:00:08.1: [10de:03f6] type 00 class 0x010185
[    0.269732] pci 0000:00:08.1: reg 0x10: [io  0xc800-0xc807]
[    0.269735] pci 0000:00:08.1: reg 0x14: [io  0xc480-0xc483]
[    0.269739] pci 0000:00:08.1: reg 0x18: [io  0xc400-0xc407]
[    0.269742] pci 0000:00:08.1: reg 0x1c: [io  0xc080-0xc083]
[    0.269746] pci 0000:00:08.1: reg 0x20: [io  0xc000-0xc00f]
[    0.269750] pci 0000:00:08.1: reg 0x24: [mem 0xdbfef000-0xdbfeffff]
[    0.269812] pci 0000:00:09.0: [10de:03e8] type 01 class 0x060400
[    0.269836] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.269856] pci 0000:00:09.0: System wakeup disabled by ACPI
[    0.269889] pci 0000:00:0b.0: [10de:03e9] type 01 class 0x060400
[    0.269911] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.269932] pci 0000:00:0b.0: System wakeup disabled by ACPI
[    0.269965] pci 0000:00:0c.0: [10de:03e9] type 01 class 0x060400
[    0.269990] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.270010] pci 0000:00:0c.0: System wakeup disabled by ACPI
[    0.270051] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.270097] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.270140] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.270183] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.270229] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.270325] pci 0000:00:04.0: PCI bridge to [bus 01] (subtractive decode)
[    0.270330] pci 0000:00:04.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.270332] pci 0000:00:04.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.270333] pci 0000:00:04.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.270335] pci 0000:00:04.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[    0.270337] pci 0000:00:04.0:   bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[    0.270339] pci 0000:00:04.0:   bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[    0.270374] pci 0000:02:00.0: [10de:0640] type 00 class 0x030000
[    0.270383] pci 0000:02:00.0: reg 0x10: [mem 0xdf000000-0xdfffffff]
[    0.270391] pci 0000:02:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.270398] pci 0000:02:00.0: reg 0x1c: [mem 0xdc000000-0xddffffff 64bit]
[    0.270404] pci 0000:02:00.0: reg 0x24: [io  0xec00-0xec7f]
[    0.270409] pci 0000:02:00.0: reg 0x30: [mem 0xdef80000-0xdeffffff pref]
[    0.278011] pci 0000:00:09.0: PCI bridge to [bus 02]
[    0.278018] pci 0000:00:09.0:   bridge window [io  0xe000-0xefff]
[    0.278020] pci 0000:00:09.0:   bridge window [mem 0xdc000000-0xdfffffff]
[    0.278023] pci 0000:00:09.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.278073] pci 0000:00:0b.0: PCI bridge to [bus 03]
[    0.278111] pci 0000:00:0c.0: PCI bridge to [bus 04]
[    0.278123] pci_bus 0000:00: on NUMA node 0
[    0.278796] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[    0.278868] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[    0.278938] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    0.279006] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    0.279075] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[    0.279143] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
[    0.279211] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[    0.279281] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *11
[    0.279351] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
[    0.279421] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
[    0.279490] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5
[    0.279564] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
[    0.279633] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
[    0.279702] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
[    0.279774] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
[    0.279844] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *11
[    0.279913] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *11
[    0.279994] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[    0.280037] ACPI: Enabled 1 GPEs in block 20 to 5F
[    0.280172] vgaarb: setting as boot device: PCI:0000:02:00.0
[    0.280174] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.280175] vgaarb: loaded
[    0.280177] vgaarb: bridge control possible 0000:02:00.0
[    0.280403] SCSI subsystem initialized
[    0.280464] libata version 3.00 loaded.
[    0.280486] ACPI: bus type USB registered
[    0.280504] usbcore: registered new interface driver usbfs
[    0.280512] usbcore: registered new interface driver hub
[    0.280598] usbcore: registered new device driver usb
[    0.280782] PCI: Using ACPI for IRQ routing
[    0.286654] PCI: pci_cache_line_size set to 64 bytes
[    0.286684] e820: reserve RAM buffer [mem 0x0009b400-0x0009ffff]
[    0.286685] e820: reserve RAM buffer [mem 0xbffa0000-0xbfffffff]
[    0.286794] NetLabel: Initializing
[    0.286795] NetLabel:  domain hash size = 128
[    0.286796] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.286805] NetLabel:  unlabeled traffic allowed by default
[    0.286897] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.286902] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    0.286905] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    0.289065] Switched to clocksource hpet
[    0.294506] AppArmor: AppArmor Filesystem Enabled
[    0.294543] pnp: PnP ACPI init
[    0.294639] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.295089] pnp 00:01: [dma 0 disabled]
[    0.295239] pnp 00:01: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.295532] pnp 00:02: disabling [io  0x0900-0x097f] because it overlaps 0000:00:01.0 BAR 0 [io  0x0900-0x09ff]
[    0.295534] pnp 00:02: disabling [io  0x0980-0x09ff] because it overlaps 0000:00:01.0 BAR 0 [io  0x0900-0x09ff]
[    0.295595] system 00:02: [io  0x04d0-0x04d1] has been reserved
[    0.295597] system 00:02: [io  0x0800-0x080f] has been reserved
[    0.295599] system 00:02: [io  0x0500-0x057f] could not be reserved
[    0.295601] system 00:02: [io  0x0580-0x05ff] has been reserved
[    0.295603] system 00:02: [io  0x0800-0x087f] could not be reserved
[    0.295604] system 00:02: [io  0x0880-0x08ff] has been reserved
[    0.295606] system 00:02: [io  0x0d00-0x0d7f] has been reserved
[    0.295608] system 00:02: [io  0x0d80-0x0dff] has been reserved
[    0.295609] system 00:02: [io  0x1100-0x117f] has been reserved
[    0.295611] system 00:02: [io  0x1180-0x11ff] has been reserved
[    0.295613] system 00:02: [mem 0x000d0000-0x000d3fff window] has been reserved
[    0.295615] system 00:02: [mem 0x000d4000-0x000d7fff window] has been reserved
[    0.295617] system 00:02: [mem 0x000de000-0x000dffff window] has been reserved
[    0.295619] system 00:02: [mem 0xfec80000-0x1fd93ffff] could not be reserved
[    0.295621] system 00:02: [mem 0xfefe0000-0xfefe01ff] has been reserved
[    0.295623] system 00:02: [mem 0xfefe1000-0xfefe1fff] has been reserved
[    0.295624] system 00:02: [mem 0xfee01000-0xfeefffff] has been reserved
[    0.295627] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.295716] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.295718] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.295720] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.295867] system 00:04: [io  0x0230-0x023f] has been reserved
[    0.295869] system 00:04: [io  0x0290-0x029f] has been reserved
[    0.295871] system 00:04: [io  0x0a00-0x0a0f] has been reserved
[    0.295873] system 00:04: [io  0x0a30-0x0a3f] has been reserved
[    0.295875] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.296184] pnp 00:05: [dma 0 disabled]
[    0.296235] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.296292] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[    0.296295] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.296411] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.296413] system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.296415] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.296416] system 00:07: [mem 0x00100000-0xbfffffff] could not be reserved
[    0.296418] system 00:07: [mem 0xfec00000-0xffffffff] could not be reserved
[    0.296420] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.296596] pnp: PnP ACPI: found 8 devices
[    0.303119] pci 0000:00:04.0: PCI bridge to [bus 01]
[    0.303125] pci 0000:00:09.0: PCI bridge to [bus 02]
[    0.303127] pci 0000:00:09.0:   bridge window [io  0xe000-0xefff]
[    0.303130] pci 0000:00:09.0:   bridge window [mem 0xdc000000-0xdfffffff]
[    0.303132] pci 0000:00:09.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.303135] pci 0000:00:0b.0: PCI bridge to [bus 03]
[    0.303138] pci 0000:00:0c.0: PCI bridge to [bus 04]
[    0.303143] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.303145] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.303146] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.303148] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.303149] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[    0.303151] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[    0.303153] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7]
[    0.303154] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff]
[    0.303156] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[    0.303157] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[    0.303159] pci_bus 0000:01: resource 8 [mem 0xc0000000-0xdfffffff]
[    0.303161] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfebfffff]
[    0.303162] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.303164] pci_bus 0000:02: resource 1 [mem 0xdc000000-0xdfffffff]
[    0.303165] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.303191] NET: Registered protocol family 2
[    0.303365] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.303472] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.303618] TCP: Hash tables configured (established 32768 bind 32768)
[    0.303658] TCP: reno registered
[    0.303665] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.303690] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.303776] NET: Registered protocol family 1
[    0.304011] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    0.881722] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    0.881824] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.881868] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.881921] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.881971] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.882022] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.882076] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.882133] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.882193] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.882210] pci 0000:02:00.0: Video device with shadowed ROM
[    0.882212] PCI: CLS 64 bytes, default 64
[    0.882273] Trying to unpack rootfs image as initramfs...
[    1.134549] Freeing initrd memory: 16484K (ffff880035fbe000 - ffff880036fd7000)
[    1.134757] PCI-DMA: Disabling AGP.
[    1.134832] PCI-DMA: aperture base @ b4000000 size 65536 KB
[    1.134833] PCI-DMA: using GART IOMMU.
[    1.134835] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.137496] microcode: CPU0: patch_level=0x010000b7
[    1.137505] microcode: CPU1: patch_level=0x010000b7
[    1.137578] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.137582] LVT offset 1 assigned for vector 0x400
[    1.137588] IBS: LVT offset 1 assigned
[    1.137601] perf: AMD IBS detected (0x0000001f)
[    1.137642] Scanning for low memory corruption every 60 seconds
[    1.137947] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.137993] Initialise system trusted keyring
[    1.138012] audit: initializing netlink subsys (disabled)
[    1.138030] audit: type=2000 audit(1414218727.032:1): initialized
[    1.138412] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.139834] zpool: loaded
[    1.139836] zbud: loaded
[    1.140057] VFS: Disk quotas dquot_6.5.2
[    1.140103] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.140620] fuse init (API version 7.23)
[    1.140768] msgmni has been set to 7900
[    1.140834] Key type big_key registered
[    1.141250] Key type asymmetric registered
[    1.141252] Asymmetric key parser 'x509' registered
[    1.141286] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.141326] io scheduler noop registered
[    1.141328] io scheduler deadline registered (default)
[    1.141356] io scheduler cfq registered
[    1.141455] pcieport 0000:00:09.0: irq 24 for MSI/MSI-X
[    1.141495] pcieport 0000:00:0b.0: irq 25 for MSI/MSI-X
[    1.141532] pcieport 0000:00:0c.0: irq 26 for MSI/MSI-X
[    1.141583] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.141597] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.141665] vesafb: mode is 640x480x32, linelength=2560, pages=0
[    1.141666] vesafb: scrolling: redraw
[    1.141668] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.141678] vesafb: framebuffer at 0xdd000000, mapped to 0xffffc90010780000, using 1216k, total 1216k
[    1.144770] Console: switching to colour frame buffer device 80x30
[    1.147793] fb0: VESA VGA frame buffer device
[    1.147874] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.147878] ACPI: Power Button [PWRB]
[    1.147913] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.147915] ACPI: Power Button [PWRF]
[    1.148462] GHES: HEST is not enabled!
[    1.148561] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.168906] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.170418] Linux agpgart interface v0.103
[    1.171968] brd: module loaded
[    1.172719] loop: module loaded
[    1.172942] libphy: Fixed MDIO Bus: probed
[    1.172945] tun: Universal TUN/TAP device driver, 1.6
[    1.172946] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.173014] PPP generic driver version 2.4.2
[    1.173061] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.173065] ehci-pci: EHCI PCI platform driver
[    1.173164] ehci-pci 0000:00:02.1: EHCI Host Controller
[    1.173170] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[    1.173177] ehci-pci 0000:00:02.1: debug port 1
[    1.173205] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[    1.173223] ehci-pci 0000:00:02.1: irq 22, io mem 0xdbffac00
[    1.181679] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    1.181736] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.181738] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.181739] usb usb1: Product: EHCI Host Controller
[    1.181741] usb usb1: Manufacturer: Linux 3.17.1-031701-generic ehci_hcd
[    1.181742] usb usb1: SerialNumber: 0000:00:02.1
[    1.181882] hub 1-0:1.0: USB hub found
[    1.181887] hub 1-0:1.0: 10 ports detected
[    1.182064] ehci-platform: EHCI generic platform driver
[    1.182076] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.182079] ohci-pci: OHCI PCI platform driver
[    1.182180] ohci-pci 0000:00:02.0: OHCI PCI host controller
[    1.182185] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[    1.182211] ohci-pci 0000:00:02.0: irq 23, io mem 0xdbffb000
[    1.239758] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.239762] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.239764] usb usb2: Product: OHCI PCI host controller
[    1.239765] usb usb2: Manufacturer: Linux 3.17.1-031701-generic ohci_hcd
[    1.239766] usb usb2: SerialNumber: 0000:00:02.0
[    1.239914] hub 2-0:1.0: USB hub found
[    1.239920] hub 2-0:1.0: 10 ports detected
[    1.240091] ohci-platform: OHCI generic platform driver
[    1.240104] uhci_hcd: USB Universal Host Controller Interface driver
[    1.240173] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.240640] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.240650] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.240815] mousedev: PS/2 mouse device common for all mice
[    1.240971] rtc_cmos 00:00: RTC can wake from S4
[    1.241146] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[    1.241182] rtc_cmos 00:00: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    1.241261] device-mapper: uevent: version 1.0.3
[    1.241352] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    1.241369] ledtrig-cpu: registered to indicate activity on CPUs
[    1.241456] TCP: cubic registered
[    1.241553] NET: Registered protocol family 10
[    1.241893] NET: Registered protocol family 17
[    1.241907] Key type dns_resolver registered
[    1.242214] Loading compiled-in X.509 certificates
[    1.243055] Loaded X.509 cert 'Magrathea: Glacier signing key: 7ed115fa498074c19aa239524038017ac0fd6dfa'
[    1.243068] registered taskstats version 1
[    1.244681] Key type trusted registered
[    1.246225] Key type encrypted registered
[    1.247700] AppArmor: AppArmor sha1 policy hashing enabled
[    1.247705] ima: No TPM chip found, activating TPM-bypass!
[    1.247724] evm: HMAC attrs: 0x1
[    1.247959]   Magic number: 2:17:520
[    1.248078] rtc_cmos 00:00: setting system clock to 2014-10-25 06:32:07 UTC (1414218727)
[    1.248153] acpi-cpufreq: overriding BIOS provided _PSD data
[    1.248427] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.248428] EDD information not available.
[    1.248487] PM: Hibernation image not present or could not be loaded.
[    1.249788] Freeing unused kernel memory: 1376K (ffffffff81d20000 - ffffffff81e78000)
[    1.249792] Write protecting the kernel read-only data: 12288k
[    1.250735] Freeing unused kernel memory: 336K (ffff8800017ac000 - ffff880001800000)
[    1.251545] Freeing unused kernel memory: 324K (ffff880001baf000 - ffff880001c00000)
[    1.270203] udevd[107]: starting version 175
[    1.311973] sata_nv 0000:00:08.0: version 3.5
[    1.312171] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[    1.315535] scsi host0: sata_nv
[    1.316865] scsi host1: sata_nv
[    1.316934] ata1: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 21
[    1.316937] ata2: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 21
[    1.317224] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
[    1.322513] scsi host2: sata_nv
[    1.328290] scsi host3: sata_nv
[    1.328369] ata3: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc000 irq 20
[    1.328371] ata4: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xc008 irq 20
[    1.328418] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    1.328621] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
[    1.390893] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr e0:cb:4e:cb:eb:01
[    1.390898] forcedeth 0000:00:07.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
[    1.390967] pata_amd 0000:00:06.0: version 0.4.1
[    1.391547] scsi host4: pata_amd
[    1.391629] scsi host5: pata_amd
[    1.391666] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    1.391667] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    1.493920] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.652212] ata3: SATA link down (SStatus 0 SControl 300)
[    1.761653] usb 1-1: New USB device found, idVendor=046d, idProduct=0802
[    1.761657] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=2
[    1.761659] usb 1-1: SerialNumber: 95E18490
[    1.782090] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.790479] ata1.00: ATA-8: ST500DM002-1BD142, KC43, max UDMA/133
[    1.790483] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.806473] ata1.00: configured for UDMA/133
[    1.806658] scsi 0:0:0:0: Direct-Access     ATA      ST500DM002-1BD14 KC43 PQ: 0 ANSI: 5
[    1.806919] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.806937] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.806939] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.806965] sd 0:0:0:0: [sda] Write Protect is off
[    1.806967] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.806979] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.837065]  sda: sda1 sda2 < sda5 > sda3 sda4
[    1.837447] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.134310] tsc: Refined TSC clocksource calibration: 3013.705 MHz
[    2.134339] usb 1-4: new high-speed USB device number 4 using ehci-pci
[    2.274410] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.282494] usb 1-4: New USB device found, idVendor=148f, idProduct=5572
[    2.282498] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.282500] usb 1-4: Product: 802.11 n WLAN
[    2.282502] usb 1-4: Manufacturer: Ralink
[    2.282503] usb 1-4: SerialNumber: 1.0
[    2.283239] ata2.00: ATA-8: WDC WD5000AAKX-08ERMA0, 19.01H19, max UDMA/100
[    2.283242] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.292884] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[    2.292888] EXT4-fs (sda1): write access will be enabled during recovery
[    2.299231] ata2.00: configured for UDMA/100
[    2.299392] scsi 1:0:0:0: Direct-Access     ATA      WDC WD5000AAKX-0 1H19 PQ: 0 ANSI: 5
[    2.299619] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    2.299712] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.299750] sd 1:0:0:0: [sdb] Write Protect is off
[    2.299753] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.299770] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.305134]  sdb: sdb1
[    2.305388] sd 1:0:0:0: [sdb] Attached SCSI disk
[    2.586617] usb 2-2: new full-speed USB device number 2 using ohci-pci
[    2.620853] ata4: SATA link down (SStatus 0 SControl 300)
[    2.620935] ata6: port disabled--ignoring
[    2.808840] usb 2-2: New USB device found, idVendor=046d, idProduct=c52e
[    2.808843] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.808845] usb 2-2: Product: USB Receiver
[    2.808847] usb 2-2: Manufacturer: Logitech
[    2.819048] hidraw: raw HID events driver (C) Jiri Kosina
[    2.833076] usbcore: registered new interface driver usbhid
[    2.833148] usbhid: USB HID core driver
[    2.836324] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/0003:046D:C52E.0001/input/input4
[    2.836429] hid-generic 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:02.0-2/input0
[    2.836746] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.1/0003:046D:C52E.0002/input/input5
[    2.836848] hid-generic 0003:046D:C52E.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-2/input1
[    3.135009] Switched to clocksource tsc
[    3.444821] random: nonblocking pool is initialized
[    3.448615] EXT4-fs (sda1): recovery complete
[    3.466899] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   13.251984] Adding 7816188k swap on /dev/sda5.  Priority:-1 extents:1 across:7816188k FS
[   13.334394] udevd[407]: starting version 175
[   13.705471] lp: driver loaded but no devices found
[   13.797874] parport_pc 00:01: reported by Plug and Play ACPI
[   13.797920] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   13.872248] ppdev: user-space parallel port driver
[   13.894078] lp0: using parport0 (interrupt-driven).
[   13.949293] wmi: Mapper loaded
[   13.991501] MCE: In-kernel MCE decoding enabled.
[   14.037533] media: Linux media interface: v0.10
[   14.074635] EDAC MC: Ver: 3.0.0
[   14.132471] AMD64 EDAC driver v3.4.0
[   14.132499] EDAC amd64: DRAM ECC disabled.
[   14.132503] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[   14.132503]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[   14.132503]  (Note that use of the override may cause unknown side effects.)
[   14.136071] Linux video capture interface: v2.00
[   14.152607] ACPI Warning: SystemIO range 0x0000000000000600-0x000000000000063f conflicts with OpRegion 0x0000000000000600-0x00000000000006ff (\_SB_.PCI0.SBRG.ASOC.SMRG) (20140724/utaddress-258)
[   14.152615] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.152666] i2c i2c-0: nForce2 SMBus adapter at 0x700
[   14.281081] cfg80211: Calling CRDA to update world regulatory domain
[   14.310080] cfg80211: World regulatory domain updated:
[   14.310084] cfg80211:  DFS Master region: unset
[   14.310085] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   14.310087] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   14.310118] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[   14.310120] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[   14.310121] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   14.310123] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   14.443706] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0802)
[   14.484704] input: UVC Camera (046d:0802) as /devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1:1.0/input/input7
[   14.484826] usbcore: registered new interface driver uvcvideo
[   14.484828] USB Video Class driver (1.1.1)
[   14.527365] [drm] Initialized drm 1.1.0 20060810
[   14.919262] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[   14.919273] snd_hda_intel 0000:00:05.0: Disabling MSI
[   14.989805] checking generic (dd000000 130000) vs hw (c0000000 10000000)
[   14.989809] checking generic (dd000000 130000) vs hw (dc000000 2000000)
[   14.989811] fb: switching to nouveaufb from VESA VGA
[   14.989847] Console: switching to colour dummy device 80x25
[   14.990415] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 19
[   14.990674] nouveau  [  DEVICE][0000:02:00.0] BOOT0  : 0x096000c1
[   14.990676] nouveau  [  DEVICE][0000:02:00.0] Chipset: G96 (NV96)
[   14.990678] nouveau  [  DEVICE][0000:02:00.0] Family : NV50
[   14.990707] nouveau  [   VBIOS][0000:02:00.0] checking PRAMIN for image...
[   14.998592] usb 1-4: reset high-speed USB device number 4 using ehci-pci
[   15.039988] nouveau  [   VBIOS][0000:02:00.0] ... appears to be valid
[   15.039990] nouveau  [   VBIOS][0000:02:00.0] using image from PRAMIN
[   15.040176] nouveau  [   VBIOS][0000:02:00.0] BIT signature found
[   15.040178] nouveau  [   VBIOS][0000:02:00.0] version 62.94.80.00.00
[   15.060598] nouveau 0000:02:00.0: irq 27 for MSI/MSI-X
[   15.060607] nouveau  [     PMC][0000:02:00.0] MSI interrupts enabled
[   15.060635] nouveau  [     PFB][0000:02:00.0] RAM type: DDR2
[   15.060637] nouveau  [     PFB][0000:02:00.0] RAM size: 1024 MiB
[   15.060638] nouveau  [     PFB][0000:02:00.0]    ZCOMP: 2048 tags
[   15.061328] nouveau  [    VOLT][0000:02:00.0] GPU voltage: 1100000uv
[   15.076853] usb 1-1: Warning! Unlikely big volume range (=6144), cval->res is probably wrong.
[   15.076858] usb 1-1: [5] FU [Mic Capture Volume] ch = 1, val = 1536/7680/1
[   15.077196] usbcore: registered new interface driver snd-usb-audio
[   15.089453] nouveau  [  PTHERM][0000:02:00.0] FAN control: none / external
[   15.089463] nouveau  [  PTHERM][0000:02:00.0] fan management: automatic
[   15.089466] nouveau  [  PTHERM][0000:02:00.0] internal sensor: yes
[   15.089478] nouveau  [     CLK][0000:02:00.0] 0f: core 550 MHz shader 1375 MHz memory 400 MHz
[   15.089520] nouveau  [     CLK][0000:02:00.0] --: core 400 MHz shader 800 MHz memory 399 MHz
[   15.089754] [TTM] Zone  kernel: Available graphics memory: 2023582 kiB
[   15.089757] [TTM] Initializing pool allocator
[   15.089764] [TTM] Initializing DMA pool allocator
[   15.089774] nouveau  [     DRM] VRAM: 1024 MiB
[   15.089776] nouveau  [     DRM] GART: 1048576 MiB
[   15.089779] nouveau  [     DRM] TMDS table version 2.0
[   15.089781] nouveau  [     DRM] DCB version 4.0
[   15.089783] nouveau  [     DRM] DCB outp 00: 02000300 00000028
[   15.089785] nouveau  [     DRM] DCB outp 01: 02000302 00020030
[   15.089786] nouveau  [     DRM] DCB outp 02: 04011310 00000028
[   15.089788] nouveau  [     DRM] DCB outp 03: 01022332 00020010
[   15.089789] nouveau  [     DRM] DCB conn 00: 00002030
[   15.089791] nouveau  [     DRM] DCB conn 01: 00000100
[   15.089792] nouveau  [     DRM] DCB conn 02: 00001261
[   15.096712] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   15.096713] [drm] Driver supports precise vblank timestamp query.
[   15.103662] nouveau  [     DRM] MM: using CRYPT for buffer copies
[   15.139878] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detected
[   15.167469] nouveau  [     DRM] allocated 1440x900 fb: 0x70000, bo ffff880138caf000
[   15.167640] fbcon: nouveaufb (fb0) is primary device
[   15.167725] Console: switching to colour frame buffer device 180x56
[   15.167730] nouveau 0000:02:00.0: fb0: nouveaufb frame buffer device
[   15.167732] nouveau 0000:02:00.0: registered panic notifier
[   15.169298] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 000f detected
[   15.174725] [drm] Initialized nouveau 1.2.0 20120801 for 0000:02:00.0 on minor 0
[   15.239584] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   15.239891] usbcore: registered new interface driver rt2800usb
[   15.245581] rt2800usb 1-4:1.0 wlan2: renamed from wlan0
[   15.498898] sound hdaudioC0D0: autoconfig: line_outs=1 (0x1c/0x0/0x0/0x0/0x0) type:line
[   15.498903] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   15.498905] sound hdaudioC0D0:    hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
[   15.498906] sound hdaudioC0D0:    mono: mono_out=0x0
[   15.498908] sound hdaudioC0D0:    dig-out=0x20/0x0
[   15.498909] sound hdaudioC0D0:    inputs:
[   15.498911] sound hdaudioC0D0:      Rear Mic=0x1a
[   15.498912] sound hdaudioC0D0:      Front Mic=0x1e
[   15.498914] sound hdaudioC0D0:      Line=0x1b
[   15.844686] nouveau E[     PFB][0000:02:00.0] trapped write at 0x010109f080 on channel 0x0003fee0 [unknown] BAR/PFIFO_WRITE/IN reason: PAGE_NOT_PRESENT
[   15.950849] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   16.237736] init: failsafe main process (844) killed by TERM signal
[   16.245862] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input8
[   16.245929] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input9
[   16.245988] input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input10
[   16.246043] input: HDA NVidia Line Out as /devices/pci0000:00/0000:00:05.0/sound/card0/input11
[   16.246109] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:05.0/sound/card0/input12
[   16.546634] Bluetooth: Core ver 2.19
[   16.546655] NET: Registered protocol family 31
[   16.546656] Bluetooth: HCI device and connection manager initialized
[   16.546841] Bluetooth: HCI socket layer initialized
[   16.546843] Bluetooth: L2CAP socket layer initialized
[   16.546850] Bluetooth: SCO socket layer initialized
[   16.651982] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   16.651985] Bluetooth: BNEP filters: protocol multicast
[   16.651993] Bluetooth: BNEP socket layer initialized
[   16.732172] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[   16.738841] Bluetooth: RFCOMM TTY layer initialized
[   16.738854] Bluetooth: RFCOMM socket layer initialized
[   16.738865] Bluetooth: RFCOMM ver 1.11
[   16.845798] nouveau E[     PFB][0000:02:00.0] trapped write at 0x010109f0e4 on channel 0x0003fee0 [unknown] BAR/PFIFO_WRITE/IN reason: PAGE_NOT_PRESENT
[   16.845830] nouveau E[     PFB][0000:02:00.0] trapped write at 0x01010a40e0 on channel 0x0003fee0 [unknown] BAR/PFIFO_WRITE/IN reason: PAGE_NOT_PRESENT
[   16.845854] nouveau E[     PFB][0000:02:00.0] trapped write at 0x01010a90e0 on channel 0x0003fee0 [unknown] BAR/PFIFO_WRITE/IN reason: PAGE_NOT_PRESENT
[   16.971830] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.22
[   17.290726] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready
[   17.333184] forcedeth 0000:00:07.0: irq 28 for MSI/MSI-X
[   17.333209] forcedeth 0000:00:07.0 eth0: MSI enabled
[   17.333424] forcedeth 0000:00:07.0 eth0: no link during initialization
[   17.333799] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.846703] nouveau E[     PFB][0000:02:00.0] trapped write at 0x010109f140 on channel 0x0003fee0 [unknown] BAR/PFIFO_WRITE/IN reason: PAGE_NOT_PRESENT
[   18.401761] nouveau E[     PFB][0000:02:00.0] trapped write at 0x010109f19c on channel 0x0003fee0 [unknown] BAR/PFIFO_WRITE/IN reason: PAGE_NOT_PRESENT
[   18.401794] nouveau E[     PFB][0000:02:00.0] trapped write at 0x01010a419c on channel 0x0003fee0 [unknown] BAR/PFIFO_WRITE/IN reason: PAGE_NOT_PRESENT
[   18.401818] nouveau E[     PFB][0000:02:00.0] trapped write at 0x01010a91a0 on channel 0x0003fee0 [unknown] BAR/PFIFO_WRITE/IN reason: PAGE_NOT_PRESENT
[   18.762951] init: plymouth-stop pre-start process (1405) terminated with status 1
[   44.950716] wlan2: authenticate with 00:26:75:84:14:8f
[   45.050570] wlan2: send auth to 00:26:75:84:14:8f (try 1/3)
[   45.052827] wlan2: authenticated
[   45.053938] wlan2: associate with 00:26:75:84:14:8f (try 1/3)
[   45.057693] wlan2: RX AssocResp from 00:26:75:84:14:8f (capab=0x411 status=0 aid=1)
[   45.064682] wlan2: associated
[   45.064694] IPv6: ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready
[  333.499709] wlan2: deauthenticating from 00:26:75:84:14:8f by local choice (Reason: 3=DEAUTH_LEAVING)
[  333.574392] cfg80211: Calling CRDA to update world regulatory domain
[  333.580577] cfg80211: World regulatory domain updated:
[  333.580580] cfg80211:  DFS Master region: unset
[  333.580581] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[  333.580584] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[  333.580585] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[  333.580587] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[  333.580588] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[  333.580590] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[  360.829323] wlan2: authenticate with 50:67:f0:9a:97:b6
[  360.934941] wlan2: direct probe to 50:67:f0:9a:97:b6 (try 1/3)
[  361.137437] wlan2: send auth to 50:67:f0:9a:97:b6 (try 2/3)
[  361.139557] wlan2: authenticated
[  361.140152] rt2800usb 1-4:1.0 wlan2: disabling HT as WMM/QoS is not supported by the AP
[  361.140166] rt2800usb 1-4:1.0 wlan2: disabling VHT as WMM/QoS is not supported by the AP
[  361.141478] wlan2: associate with 50:67:f0:9a:97:b6 (try 1/3)
[  361.156204] wlan2: RX AssocResp from 50:67:f0:9a:97:b6 (capab=0x431 status=0 aid=2)
[  361.165489] wlan2: associated
[  361.166431] cfg80211: Calling CRDA for country: TR
[  361.171182] cfg80211: Regulatory domain changed to country: TR
[  361.171188] cfg80211:  DFS Master region: unset
[  361.171190] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[  361.171194] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[  361.171196] cfg80211:   (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[  361.171199] cfg80211:   (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 2000 mBm), (0 s)
[  361.177078] wlan2: Limiting TX power to 20 (20 - 0) dBm as advertised by 50:67:f0:9a:97:b6
[  482.403861] cfg80211: Calling CRDA to update world regulatory domain
[  482.412392] cfg80211: World regulatory domain updated:
[  482.412398] cfg80211:  DFS Master region: unset
[  482.412400] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[  482.412404] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[  482.412407] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[  482.412409] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[  482.412412] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[  482.412414] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[  486.616195] wlan2: authenticate with 50:67:f0:9a:97:b6
[  486.723964] wlan2: send auth to 50:67:f0:9a:97:b6 (try 1/3)
[  486.776096] wlan2: send auth to 50:67:f0:9a:97:b6 (try 2/3)
[  486.802366] wlan2: send auth to 50:67:f0:9a:97:b6 (try 3/3)
[  486.836224] wlan2: authentication with 50:67:f0:9a:97:b6 timed out
[  495.781968] wlan2: authenticate with 50:67:f0:9a:97:b6
[  495.885211] wlan2: direct probe to 50:67:f0:9a:97:b6 (try 1/3)
[  496.088431] wlan2: direct probe to 50:67:f0:9a:97:b6 (try 2/3)
[  496.292585] wlan2: direct probe to 50:67:f0:9a:97:b6 (try 3/3)
[  496.496715] wlan2: authentication with 50:67:f0:9a:97:b6 timed out
[  557.765176] wlan2: authenticate with 00:26:75:84:14:8f
[  557.866586] wlan2: send auth to 00:26:75:84:14:8f (try 1/3)
[  557.869054] wlan2: authenticated
[  557.872240] wlan2: associate with 00:26:75:84:14:8f (try 1/3)
[  557.875985] wlan2: RX AssocResp from 00:26:75:84:14:8f (capab=0x411 status=0 aid=1)
[  557.883259] wlan2: associated
[  688.268149] wlan2: deauthenticating from 00:26:75:84:14:8f by local choice (Reason: 3=DEAUTH_LEAVING)
[  688.344511] cfg80211: Calling CRDA to update world regulatory domain
[  688.403368] cfg80211: World regulatory domain updated:
[  688.403378] cfg80211:  DFS Master region: unset
[  688.403383] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[  688.403392] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[  688.403398] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[  688.403403] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[  688.403409] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[  688.403414] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[  773.758480] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready
[  782.094734] wlan2: authenticate with 00:26:75:84:14:8f
[  782.201813] wlan2: send auth to 00:26:75:84:14:8f (try 1/3)
[  782.204467] wlan2: authenticated
[  782.208631] wlan2: associate with 00:26:75:84:14:8f (try 1/3)
[  782.213130] wlan2: RX AssocResp from 00:26:75:84:14:8f (capab=0x411 status=0 aid=1)
[  782.220226] wlan2: associated
[  782.220241] IPv6: ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready
[  981.895562] wlan2: deauthenticating from 00:26:75:84:14:8f by local choice (Reason: 3=DEAUTH_LEAVING)
[  982.010507] cfg80211: Calling CRDA to update world regulatory domain
[  982.013521] cfg80211: World regulatory domain updated:
[  982.013525] cfg80211:  DFS Master region: unset
[  982.013527] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[  982.013529] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[  982.013531] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[  982.013533] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[  982.013534] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[  982.013535] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[  983.278092] wlan2: authenticate with 00:1c:a8:d0:d9:4f
[  983.378810] wlan2: direct probe to 00:1c:a8:d0:d9:4f (try 1/3)
[  983.581841] wlan2: direct probe to 00:1c:a8:d0:d9:4f (try 2/3)
[  983.786022] wlan2: direct probe to 00:1c:a8:d0:d9:4f (try 3/3)
[  983.990099] wlan2: authentication with 00:1c:a8:d0:d9:4f timed out
[  989.683284] Program lshw tried to access /dev/mem between ff000->101000.


Kod Seç Genişlet

~ $ dmesg | tail
[  982.013531] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[  982.013533] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[  982.013534] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[  982.013535] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[  983.278092] wlan2: authenticate with 00:1c:a8:d0:d9:4f
[  983.378810] wlan2: direct probe to 00:1c:a8:d0:d9:4f (try 1/3)
[  983.581841] wlan2: direct probe to 00:1c:a8:d0:d9:4f (try 2/3)
[  983.786022] wlan2: direct probe to 00:1c:a8:d0:d9:4f (try 3/3)
[  983.990099] wlan2: authentication with 00:1c:a8:d0:d9:4f timed out
[  989.683284] Program lshw tried to access /dev/mem between ff000->101000.

Everest EWN-813N satın aldım. Ancak sürücüsünü güncellemede sıkıntı yaşıyorum.
Cihazın içini açtım. RT5572N çipseti. MediaTek'in kendi sitesinden güncel sürücüyü indirdim. Ancak şu hataları almaktayım.

Kod Seç Genişlet

~/DPO_RT5572_LinuxSTA_2.6.1.3_20121022 $ sudo make
[sudo] password for historian:
make -C tools
make[1]:`/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/tools' dizinine giriliyor
gcc -g bin2h.c -o bin2h
make[1]: `/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/tools' dizininden çıkılıyor
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/tools/bin2h
cp -f os/linux/Makefile.6 /home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/Makefile
make -C /lib/modules/3.17.1-031701-generic/build SUBDIRS=/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux modules
make[1]:`/usr/src/linux-headers-3.17.1-031701-generic' dizinine giriliyor
  CC [M]  /home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/crypt_md5.o
  CC [M]  /home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/crypt_sha2.o
  CC [M]  /home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/crypt_hmac.o
  CC [M]  /home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/crypt_aes.o
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/crypt_aes.c: 'AES_Key_Wrap' fonksiyonunda:
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/crypt_aes.c:1459:6: UYARI: format '%d' expects argument of type 'int', but argument 2 has type 'long unsigned int' [-Wformat]
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/crypt_aes.c: 'AES_Key_Unwrap' fonksiyonunda:
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/crypt_aes.c:1554:6: UYARI: format '%d' expects argument of type 'int', but argument 2 has type 'long unsigned int' [-Wformat]
  CC [M]  /home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/crypt_arc4.o
  CC [M]  /home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/mlme.o
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/mlme.c: 'MlmeResetRalinkCounters' fonksiyonunda:
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/mlme.c:567:3: UYARI: göstericiden farklı tamsayı türlere dönüşüm [-Wpointer-to-int-cast]
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/mlme.c:567:3: UYARI: göstericiden farklı tamsayı türlere dönüşüm [-Wpointer-to-int-cast]
  CC [M]  /home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/cmm_wep.o
  CC [M]  /home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/action.o
  CC [M]  /home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/cmm_data.o
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/cmm_data.c: 'RtmpPrepareHwNullFrame' fonksiyonunda:
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/cmm_data.c:3142:4: UYARI: passing argument 2 of 'hex_dump' from incompatible pointer type [enabled by default]
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/include/rt_os_util.h:679:6: bilgi: expected 'unsigned char *' but argument is of type 'UINT32 *'
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/cmm_data.c:3150:4: UYARI: passing argument 2 of 'RTUSBReadMACRegister' makes integer from pointer without a cast [enabled by default]
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/include/rtmp.h:7214:10: bilgi: expected 'USHORT' but argument is of type 'USHORT *'
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/cmm_data.c:3151:4: UYARI: passing argument 2 of 'hex_dump' from incompatible pointer type [enabled by default]
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/include/rt_os_util.h:679:6: bilgi: expected 'unsigned char *' but argument is of type 'UINT32 *'
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/cmm_data.c:3021:8: UYARI: 'MlmeRate' değişkeni kullanılmamış [-Wunused-variable]
  CC [M]  /home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/rtmp_init.o
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/rtmp_init.c: 'NICInitializeAsic' fonksiyonunda:
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/rtmp_init.c:1826:11: UYARI: 'apidx' değişkeni kullanılmamış [-Wunused-variable]
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/rtmp_init.c:1826:9: UYARI: 'i' değişkeni kullanılmamış [-Wunused-variable]
  CC [M]  /home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/rtmp_init_inf.o
  CC [M]  /home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/cmm_tkip.o
  CC [M]  /home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/cmm_aes.o
  CC [M]  /home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/cmm_sync.o
  CC [M]  /home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/eeprom.o
  CC [M]  /home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/cmm_sanity.o
  CC [M]  /home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/cmm_info.o
  CC [M]  /home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/cmm_cfg.o
  CC [M]  /home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/cmm_wpa.o
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/cmm_wpa.c: 'PeerPairMsg3Action' fonksiyonunda:
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/cmm_wpa.c:1031:13: UYARI: 'Cancelled' değişkeni kullanılmamış [-Wunused-variable]
  CC [M]  /home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/cmm_radar.o
  CC [M]  /home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/spectrum.o
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/spectrum.c: 'PeerMeasureReportAction' fonksiyonunda:
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/spectrum.c:1972:3: UYARI: format '%d' expects argument of type 'int', but argument 3 has type 'long unsigned int' [-Wformat]
  CC [M]  /home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/rtmp_timer.o
  CC [M]  /home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/rt_channel.o
  CC [M]  /home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/cmm_profile.o
  CC [M]  /home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/cmm_asic.o
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/cmm_asic.c: 'AsicGetAutoAgcOffsetForTemperatureSensor' fonksiyonunda:
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/cmm_asic.c:1188:28: UYARI: assignment discards 'const' qualifier from pointer target type [enabled by default]
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/cmm_asic.c:1201:28: UYARI: assignment discards 'const' qualifier from pointer target type [enabled by default]
  CC [M]  /home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/cmm_cmd.o
  CC [M]  /home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/ps.o
  CC [M]  /home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/uapsd.o
  CC [M]  /home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../rate_ctrl/ra_ctrl.o
  CC [M]  /home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../rate_ctrl/alg_legacy.o
  CC [M]  /home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../rate_ctrl/alg_ags.o
  CC [M]  /home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../os/linux/rt_profile.o
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../os/linux/rt_profile.c: 'STA_MonPktSend' fonksiyonunda:
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../os/linux/rt_profile.c:463:9: UYARI: format '%d' expects argument of type 'int', but argument 3 has type 'long unsigned int' [-Wformat]
  CC [M]  /home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../chips/rtmp_chip.o
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../chips/rtmp_chip.c: 'RTMPReadChannelPwr' fonksiyonunda:
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../chips/rtmp_chip.c:1380:2: UYARI: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement]
  CC [M]  /home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../sta/assoc.o
  CC [M]  /home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../sta/auth.o
  CC [M]  /home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../sta/auth_rsp.o
  CC [M]  /home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../sta/sync.o
  CC [M]  /home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../sta/sanity.o
  CC [M]  /home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../sta/rtmp_data.o
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../sta/rtmp_data.c: 'STAHandleRxDataFrame' fonksiyonunda:
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../sta/rtmp_data.c:284:17: UYARI: 'pFmeCtrl' değişkeni kullanılmamış [-Wunused-variable]
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../sta/rtmp_data.c:283:8: UYARI: 'OldPwrMgmt' değişkeni kullanılmamış [-Wunused-variable]
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../sta/rtmp_data.c: 'STAFindCipherAlgorithm' fonksiyonunda:
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../sta/rtmp_data.c:1740:4: UYARI: suggest parentheses around '&&' within '||' [-Wparentheses]
  CC [M]  /home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../sta/connect.o
  CC [M]  /home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../sta/wpa.o
  CC [M]  /home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../sta/sta_cfg.o
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../sta/sta_cfg.c: 'RTMPQueryInformation' fonksiyonunda:
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../sta/sta_cfg.c:4039:4: UYARI: format '%d' expects argument of type 'int', but argument 2 has type 'long unsigned int' [-Wformat]
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../sta/sta_cfg.c: 'set_quality' fonksiyonunda:
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../sta/sta_cfg.c:5548:2: UYARI: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement]
  CC [M]  /home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../common/rt_os_util.o
  CC [M]  /home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../os/linux/sta_ioctl.o
  CC [M]  /home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../os/linux/rt_linux.o
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../os/linux/rt_linux.c: 'duplicate_pkt' fonksiyonunda:
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../os/linux/rt_linux.c:513:3: UYARI: passing argument 1 of 'memmove' makes pointer from integer without a cast [enabled by default]
./arch/x86/include/asm/string_64.h:58:7: bilgi: expected 'void *' but argument is of type 'sk_buff_data_t'
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../os/linux/rt_linux.c:515:3: UYARI: passing argument 1 of 'memmove' makes pointer from integer without a cast [enabled by default]
./arch/x86/include/asm/string_64.h:58:7: bilgi: expected 'void *' but argument is of type 'sk_buff_data_t'
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../os/linux/rt_linux.c: 'ClonePacket' fonksiyonunda:
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../os/linux/rt_linux.c:667:20: UYARI: atamada bir tür dönüşümü olmaksızın göstericiden tamsayı yapılıyor [enabled by default]
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../os/linux/rt_linux.c: 'RtmpOsPktInit' fonksiyonunda:
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../os/linux/rt_linux.c:686:2: UYARI: atamada bir tür dönüşümü olmaksızın göstericiden tamsayı yapılıyor [enabled by default]
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../os/linux/rt_linux.c: 'wlan_802_11_to_802_3_packet' fonksiyonunda:
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../os/linux/rt_linux.c:713:15: UYARI: atamada bir tür dönüşümü olmaksızın göstericiden tamsayı yapılıyor [enabled by default]
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../os/linux/rt_linux.c: '__RtmpOSFSInfoChange' fonksiyonunda:
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../os/linux/rt_linux.c:1141:20: hata: incompatible types when assigning to type 'int' from type 'kuid_t'
/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../os/linux/rt_linux.c:1142:20: hata: incompatible types when assigning to type 'int' from type 'kgid_t'
make[2]: *** [/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux/../../os/linux/rt_linux.o] Hata 1
make[1]: *** [_module_/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux] Hata 2
make[1]: `/usr/src/linux-headers-3.17.1-031701-generic' dizininden çıkılıyor
make: *** [LINUX] Hata 2


Kod Seç Genişlet

~/DPO_RT5572_LinuxSTA_2.6.1.3_20121022 $ sudo make install
make -C /home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux -f Makefile.6 install
mkdir: `/etc/Wireless' dizini oluşturulamıyor: Dosya var
make[1]:`/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux' dizinine giriliyor
rm -rf /etc/Wireless/RT2870STA
mkdir /etc/Wireless/RT2870STA
cp /home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/RT2870STA.dat /etc/Wireless/RT2870STA/.
install -d /lib/modules/3.17.1-031701-generic/kernel/drivers/net/wireless/
install -m 644 -c rt5572sta.ko /lib/modules/3.17.1-031701-generic/kernel/drivers/net/wireless/
install: `rt5572sta.ko' durumlanamadı: Böyle bir dosya ya da dizin yok
make[1]: *** [install] Hata 1
make[1]: `/home/historian/DPO_RT5572_LinuxSTA_2.6.1.3_20121022/os/linux' dizininden çıkılıyor
make: *** [install] Hata 2


[kindly34]

Aygıtın çalışmasında nasıl bir sorun var?

[mustineo]

Çekim kalitesi düşük. Güncel sürücü sorunu çözer diye düşünüyorum.

[heartsmagic]

Alınan hata şu:

Kod Seç Genişlet

hata: incompatible types when assigning to type 'int' from type 'kuid_t'

Yeni çekirdeklerde ve güncel olmayan sürücülerde bu hata alınıyor, atlatması de pek kolay değil gibiydi son bakındığımda. Bu nedenle güncel sürücülere doğru araştırma gerekiyor. Örnekler:
https://forum.ubuntu-tr.net/index.php?topic=43087.msg503907#msg503907
https://forum.ubuntu-tr.net/index.php?topic=44561.msg518959#msg518959

İlk bağlantıdaki işlem esasında senin kartta da iş görecek gibi ancak o paket nereden bulunur bir fikrim yok.

Sana bu örneklerde olduğu gibi güncel sürücüler gerekiyor. Fakat nerede bulabiliriz bilmiyorum. Github üzerinde bir sürü çıkıyor fakat onlarda da aynı sorun yaşanır mı yaşanmaz mı bilemiyorum. Örnekler
https://github.com/freegeek-pdx/rt5572usb
https://github.com/coolshou/DPO_RT5572

Özellikle ikinci bağlantı senin indirdiğin sürücüye benziyor, fakat sorun var mı yok mu bilemiyorum. Deneyelim bakalım.
İkinci bağlantıdan çektiğim sürücü derlendi güzelce fakat Readme dosyasında şu yazıyor:

DPO_RT5572
==========

Kernel driver for the Ralink rt5572 dual-band Wi-Fi adapte

The driver is from MediaTek

Note: kernel 3.10.2 had add support rt5572  in rt2800usb

Kısacası 3.10.2 ile beraber rt2800usb modülü ile bu karta destek var ve sende de bu modül kullanılıyor. Baktığımda kafam karışmıştı demek ki modül ismi böyleymiş. Yine de denemek istiyorsan:

Kod Seç Genişlet

git clone https://github.com/coolshou/DPO_RT5572.git
cd DPO_RT5572
make
sudo make install

Bu aşamadan sonra modülü değiştirmemiz gerekecek zira bu sürücü rt5572sta modülünü yüklüyor. Sende ise rt2800usb kullanılıyor. Önce onu kara listeye alalım:

Kod Seç Genişlet

echo "rt2800usb" | sudo tee -a  /etc/modprobe.d/blacklist.conf

Daha sonra sistemi yeniden başlat. rt2800usb modülünün yüklü olmaması, rt5572sta'nın ise yüklü olması lazım. Eğer yüklü değilse:

Kod Seç Genişlet

sudo modprobe rt5572sta
ile yükleyip duruma bakarsın.

Eğer kablosuz ağ hiç gelmezse işlemleri geri alman mümkün. Modülü sistemden kaldırmak içinse sürücü dizininde:

Kod Seç Genişlet

sudo make uninstall
demen yeterli.

[mustineo]

@heartsmagic dediklerinizi harfiyen uyguladım. Ancak şu hatayı aldım yeniden başlattıktan sonra:

Kod Seç Genişlet

sudo modprobe rt5572sta
[sudo] password for historian:
WARNING: /etc/modprobe.d/blacklist.conf line 56: ignoring bad line starting with 'rt2800usb'



[heartsmagic]

Yanlış ekletmişim de o nedenle vermiş hatayı. Şöyle düzeltelim onu da:

Kod Seç Genişlet

sudo sed -i 's/rt2800usb/blacklist rt2800usb/' /etc/modprobe.d/blacklist.conf

Ardından sistemi yeniden başlatır, önce hiçbir şey yapmadan şu çıktıya bakarsın:

Kod Seç Genişlet

lsmod | egrep "rt2800usb|rt5572sta"

Eğer işler yolundaysa burada sadece rt5572sta çıktısının olması gerekiyor. Eğer rt5572sta yüklü değile yine elle modprobe kullanarak denersin. Eski modül yüklüyse işler biraz daha karışır.

[mustineo]

Kod Seç Genişlet

lsmod | egrep "rt2800usb|rt5572sta"
rt5572sta      815184 0
Çıktıda görüldüğü üzere sadece rt5572sta var. Ancak yeniden başlattıktan sonra modprobe yaptığım halde aygıt çalışmadı. /etc/modprobe.d/blacklist.conf dan blacklist rt2800usb yi sildikten sonra aygıt eskisi gibi çalışmaya başladı.

[heartsmagic]

Zaten sistem başlangıcında yeni modül devreye girmiş, modprobe ile yeniden yüklemen bir şeyi değiştirmeyecek. Neden kart çalışmadı bilemiyorum, doğru sürücü gibi göründü gözüme ve anladığım kadarıyla da derleme, yükleme başarılı oldu.

[mustineo]

Derlemede hata vermedi. Zaten hata vermiş olsa en son yolladığım çıktıda modül görünmezdi. Sanırım yüklediğimiz sürücü doğru değil.


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 28 Ekim 2014 - 17:27:16
DPO_5572 yi kaldırdım. rt5572usb yi kurmak istedim. Şu hatayı verdi:

Kod Seç Genişlet

~/rt5572usb $ make
make -C tools
make[1]:`/home/historian/rt5572usb/tools' dizinine giriliyor
gcc -g bin2h.c -o bin2h
make[1]: `/home/historian/rt5572usb/tools' dizininden çıkılıyor
/home/historian/rt5572usb/tools/bin2h
cp -f os/linux/Makefile.6 /home/historian/rt5572usb/os/linux/Makefile
make -C /lib/modules//build SUBDIRS=/home/historian/rt5572usb/os/linux modules
make: *** /lib/modules//build: Böyle bir dosya ya da dizin yok. Durdu.
make: *** [LINUX] Hata 2


[heartsmagic]

Ancak dikkat edersen Everst'ten indirdim dediğin sürücüde de şu ifadeler geçiyor:

Kod Seç Genişlet

DPO_RT5572_LinuxSTA_2.6.1.3_20121022/

Bu nedenle ben o tarafa yönelmiştim. O aldığın hatayı aşmak için /lib/modules altına kullanılan çekirdek sürümüne göre ufak bir sembolik bağ atmak çözüm oluyor. Fakat derleme aşaması yine şu hatayı veriyor:

Kod Seç Genişlet

error: incompatible types when assigning to type 'int' from type 'kgid_t'

Kısacası derlemek mümkün olmayabilir güncel çekirdeklerle yine. Zira zaten bu hatanın forumdaki çözümü artık iş görmediği ve ben denediğimde aşamadığım için güncel sürücülere yönelmiştik.