SSHD üzerinde ara ara yavaş açılma sorunu yaşıyorum

[yasin y.]

Merhaba konuyu hortlatmış olacağı ama tuhaf bir ssorunla karşı karşıyayım. Sistemin açılış süresi günden güne değişiyor. Yani iki gün 10-11 sn arası sistem açılırken başka gün 1 dk yı aşabiliyor buna karşın kapanış süresi sabit 2 sn. Sistemimde hibrit hdd mevcut ondan şüpheleniyorum, kendisi çok sık kullanılan dosyaları üzerindeki ssd önbelleğine alıyormuş vs. Yavaş açıldığı sıralar " random: nonblocking pool is initialized" kısmında  ortalama 20 sn harcıyordu. Grub dosyasında ilgili yere" tpm_tis.force=1" eklemeyi denedimiştim ama bir değişiklik olmamıştı. Sonuç olarak çok değişken boot sürem var, bunu 10 saniyeye sabitleyebilirmiyiz sshd'nin ssd bölümünü kullanarak.

[LinuxHacisi]

Benim sistemimde SSD kullanıyorum ubuntuyuda uefi şeklinde kurdum. açılış 8 saniye kapanma ise 4 sn civarında arada değişiyor ama nedenini anlamadığım bir şekilde

[heartsmagic]

Konuyu böldüm, daha uygun sanırım böylesi.

@yasin y., Bootchart dosyası okunaklı görünmüyor bana, dmesg çıktısı güzel olabilir. 

[yasin y.]

Kusura bakma @heartsmagic kontrol etmedim resim nasıl gözüküyor diye. https://app.box.com/s/fuittj6n5u6jsll9vh1p Linkten bakabilirsiniz bootchart resimlerine. Başlığı SSHD olarak değiştirdim sistemimde cache olarak ssd kullanan bir hdd var.  Dmesg çıktım:

Kod Seç Genişlet

[    0.651154] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.651190] pcieport 0000:00:01.1: device [8086:0c05] has invalid IRQ; check vendor BIOS
[    0.651259] pcieport 0000:00:01.1: irq 41 for MSI/MSI-X
[    0.651290] pcieport 0000:00:1c.0: device [8086:8c16] has invalid IRQ; check vendor BIOS
[    0.651363] pcieport 0000:00:1c.0: irq 42 for MSI/MSI-X
[    0.651404] pcieport 0000:00:1c.4: device [8086:8c18] has invalid IRQ; check vendor BIOS
[    0.651475] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
[    0.651534] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[    0.651537] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[    0.651545] pcieport 0000:00:01.1: Signaling PME through PCIe PME interrupt
[    0.651547] pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
[    0.651549] pcie_pme 0000:00:01.1:pcie01: service driver pcie_pme loaded
[    0.651562] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.651564] pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
[    0.651567] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.651581] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[    0.651582] pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
[    0.651586] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[    0.651594] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.651606] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.651636] efifb: probing for efifb
[    0.652037] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90010e80000, using 4160k, total 4160k
[    0.652039] efifb: mode is 1366x768x32, linelength=5504, pages=1
[    0.652040] efifb: scrolling: redraw
[    0.652041] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.654396] Console: switching to colour frame buffer device 170x48
[    0.656633] fb0: EFI VGA frame buffer device
[    0.656641] intel_idle: MWAIT substates: 0x42120
[    0.656642] intel_idle: v0.4 model 0x3C
[    0.656643] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.656722] ipmi message handler version 39.2
[    0.664058] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.664111] ACPI: AC Adapter [ADP0] (on-line)
[    0.664214] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    0.664232] ACPI: Lid Switch [LID0]
[    0.664253] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.664256] ACPI: Power Button [PWRB]
[    0.664276] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.664278] ACPI: Power Button [PWRF]
[    0.664445] GHES: HEST is not enabled!
[    0.664542] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.665774] Linux agpgart interface v0.103
[    0.666659] brd: module loaded
[    0.667120] loop: module loaded
[    0.667360] libphy: Fixed MDIO Bus: probed
[    0.667416] tun: Universal TUN/TAP device driver, 1.6
[    0.667417] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.667448] PPP generic driver version 2.4.2
[    0.667478] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.667480] ehci-pci: EHCI PCI platform driver
[    0.667574] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.667578] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.667589] ehci-pci 0000:00:1a.0: debug port 2
[    0.671485] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.671504] ehci-pci 0000:00:1a.0: irq 16, io mem 0xb571d000
[    0.680010] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.680039] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.680040] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.680041] usb usb1: Product: EHCI Host Controller
[    0.680043] usb usb1: Manufacturer: Linux 3.13.0-35-generic ehci_hcd
[    0.680044] usb usb1: SerialNumber: 0000:00:1a.0
[    0.680127] hub 1-0:1.0: USB hub found
[    0.680131] hub 1-0:1.0: 2 ports detected
[    0.680288] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.680291] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.680301] ehci-pci 0000:00:1d.0: debug port 2
[    0.684205] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.684219] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb571c000
[    0.696034] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.696066] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.696068] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.696069] usb usb2: Product: EHCI Host Controller
[    0.696071] usb usb2: Manufacturer: Linux 3.13.0-35-generic ehci_hcd
[    0.696072] usb usb2: SerialNumber: 0000:00:1d.0
[    0.696158] hub 2-0:1.0: USB hub found
[    0.696163] hub 2-0:1.0: 2 ports detected
[    0.696244] ehci-platform: EHCI generic platform driver
[    0.696250] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.696251] ohci-pci: OHCI PCI platform driver
[    0.696256] ohci-platform: OHCI generic platform driver
[    0.696261] uhci_hcd: USB Universal Host Controller Interface driver
[    0.696353] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.696356] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.696442] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.696458] xhci_hcd 0000:00:14.0: irq 44 for MSI/MSI-X
[    0.696505] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.696507] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.696508] usb usb3: Product: xHCI Host Controller
[    0.696509] usb usb3: Manufacturer: Linux 3.13.0-35-generic xhci_hcd
[    0.696510] usb usb3: SerialNumber: 0000:00:14.0
[    0.696584] hub 3-0:1.0: USB hub found
[    0.696600] hub 3-0:1.0: 14 ports detected
[    0.699132] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.699134] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.699166] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.699168] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.699169] usb usb4: Product: xHCI Host Controller
[    0.699170] usb usb4: Manufacturer: Linux 3.13.0-35-generic xhci_hcd
[    0.699171] usb usb4: SerialNumber: 0000:00:14.0
[    0.699249] hub 4-0:1.0: USB hub found
[    0.699259] hub 4-0:1.0: 4 ports detected
[    0.708144] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.721921] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.721925] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.722010] mousedev: PS/2 mouse device common for all mice
[    0.722547] rtc_cmos 00:06: RTC can wake from S4
[    0.722654] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    0.722679] rtc_cmos 00:06: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.722723] device-mapper: uevent: version 1.0.3
[    0.722771] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    0.722777] ledtrig-cpu: registered to indicate activity on CPUs
[    0.722778] EFI Variables Facility v0.08 2004-May-17
[    0.732453] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.745634] TCP: cubic registered
[    0.745701] NET: Registered protocol family 10
[    0.745820] NET: Registered protocol family 17
[    0.745827] Key type dns_resolver registered
[    0.746057] Loading compiled-in X.509 certificates
[    0.746757] Loaded X.509 cert 'Magrathea: Glacier signing key: b1414ae96c1b0ebb7c141fa405c1f6c98e8a66f0'
[    0.746768] registered taskstats version 1
[    0.748657] Key type trusted registered
[    0.750001] Key type encrypted registered
[    0.751256] AppArmor: AppArmor sha1 policy hashing enabled
[    0.751258] IMA: No TPM chip found, activating TPM-bypass!
[    0.751604] regulator-dummy: disabling
[    0.751655]   Magic number: 14:950:450
[    0.751659]  machinecheck: hash matches
[    0.751744] rtc_cmos 00:06: setting system clock to 2014-09-03 22:26:16 UTC (1409783176)
[    0.752336] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.752338] EDD information not available.
[    0.752371] PM: Hibernation image not present or could not be loaded.
[    0.804117] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.804122] ACPI: Battery Slot [BAT0] (battery present)
[    0.804825] Freeing unused kernel memory: 1336K (ffffffff81d1f000 - ffffffff81e6d000)
[    0.804827] Write protecting the kernel read-only data: 12288k
[    0.806461] Freeing unused kernel memory: 808K (ffff880002736000 - ffff880002800000)
[    0.807589] Freeing unused kernel memory: 692K (ffff880002b53000 - ffff880002c00000)
[    0.822953] systemd-udevd[141]: starting version 204
[    0.840097] psmouse: module verification failed: signature and/or  required key missing - tainting kernel
[    0.841520] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.841528] r8169 0000:08:00.0: can't disable ASPM; OS doesn't have ASPM control
[    0.841742] r8169 0000:08:00.0: irq 45 for MSI/MSI-X
[    0.841888] r8169 0000:08:00.0 eth0: RTL8106e at 0xffffc90010c98000, 28:d2:44:39:28:e6, XID 04900000 IRQ 45
[    0.842134] ahci 0000:00:1f.2: version 3.0
[    0.842246] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
[    0.842269] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    0.842290] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x14 impl SATA mode
[    0.842292] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst
[    0.843218] [drm] Initialized drm 1.1.0 20060810
[    0.848452] scsi0 : ahci
[    0.848522] scsi1 : ahci
[    0.848569] scsi2 : ahci
[    0.848625] scsi3 : ahci
[    0.848667] scsi4 : ahci
[    0.848702] ata1: DUMMY
[    0.848704] ata2: DUMMY
[    0.848706] ata3: SATA max UDMA/133 abar m2048@0xb571b000 port 0xb571b200 irq 46
[    0.848708] ata4: DUMMY
[    0.848710] ata5: SATA max UDMA/133 abar m2048@0xb571b000 port 0xb571b300 irq 46
[    0.853459] [drm] Memory usable by graphics device = 2048M
[    0.853463] checking generic (c0000000 410000) vs hw (c0000000 10000000)
[    0.853464] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
[    0.853473] Console: switching to colour dummy device 80x25
[    0.896096] i915 0000:00:02.0: irq 47 for MSI/MSI-X
[    0.896105] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    0.896106] [drm] Driver supports precise vblank timestamp query.
[    0.896198] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    0.992062] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.093623] fbcon: inteldrmfb (fb0) is primary device
[    1.124453] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[    1.124454] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.124712] hub 1-1:1.0: USB hub found
[    1.124817] hub 1-1:1.0: 6 ports detected
[    1.168039] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.172732] ata3.00: ATAPI: PLDS    DVD-RW DU8A5SH, NL61, max UDMA/100
[    1.173525] ata3.00: configured for UDMA/100
[    1.175196] scsi 2:0:0:0: CD-ROM            PLDS     DVD-RW DU8A5SH   NL61 PQ: 0 ANSI: 5
[    1.177890] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.177891] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.177992] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    1.178099] sr 2:0:0:0: Attached scsi generic sg0 type 5
[    1.236060] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.368459] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[    1.368461] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.368710] hub 2-1:1.0: USB hub found
[    1.368847] hub 2-1:1.0: 8 ports detected
[    1.496056] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.536066] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[    1.543446] ata5.00: ATA-9: ST1000LM014-1EJ164, LVD3, max UDMA/133
[    1.543447] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.587830] ata5.00: configured for UDMA/133
[    1.587963] scsi 4:0:0:0: Direct-Access     ATA      ST1000LM014-1EJ1 LVD3 PQ: 0 ANSI: 5
[    1.588081] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.588083] sd 4:0:0:0: [sda] 4096-byte physical blocks
[    1.588089] sd 4:0:0:0: Attached scsi generic sg1 type 0
[    1.588130] sd 4:0:0:0: [sda] Write Protect is off
[    1.588132] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.588180] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.591610]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11
[    1.592261] sd 4:0:0:0: [sda] Attached SCSI disk
[    1.658359] usb 3-1: New USB device found, idVendor=13d3, idProduct=5170
[    1.658361] usb 3-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    1.658362] usb 3-1: Product: Lenovo EasyCamera
[    1.658363] usb 3-1: Manufacturer: Azurewave
[    1.658363] usb 3-1: SerialNumber: NULL
[    1.828051] usb 3-7: new full-speed USB device number 3 using xhci_hcd
[    1.849119] usb 3-7: New USB device found, idVendor=8087, idProduct=07dc
[    1.849120] usb 3-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.013499] input: ALPS PS/2 Device as /devices/platform/i8042/serio1/input/input6
[    2.016077] usb 3-10: new full-speed USB device number 4 using xhci_hcd
[    2.034044] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input5
[    2.037091] usb 3-10: New USB device found, idVendor=045e, idProduct=0745
[    2.037092] usb 3-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.037093] usb 3-10: Product: Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0
[    2.037094] usb 3-10: Manufacturer: Microsoft
[    2.039893] hidraw: raw HID events driver (C) Jiri Kosina
[    2.052876] usbcore: registered new interface driver usbhid
[    2.052877] usbhid: USB HID core driver
[    2.054563] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/input/input7
[    2.054628] hid-generic 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0] on usb-0000:00:14.0-10/input0
[    2.054857] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.1/input/input8
[    2.054929] hid-generic 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0] on usb-0000:00:14.0-10/input1
[    2.064240] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.2/input/input9
[    2.064345] hid-generic 0003:045E:0745.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0] on usb-0000:00:14.0-10/input2
[    2.820121] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[    3.896062] Console: switching to colour frame buffer device 170x48
[    3.898318] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.898319] i915 0000:00:02.0: registered panic notifier
[    3.898679] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[    3.898985] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[    3.899059] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
[    3.899062] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEG1.PEGP.DD02._BCL] (Node ffff8801d6130cf8), AE_NOT_FOUND (20131115/psparse-536)
[    3.899100] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:40/LNXVIDEO:00/input/input10
[    3.909062] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.909319] acpi device:5a: registered as cooling_device4
[    3.909374] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input11
[    3.909513] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    4.203933] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[    4.948601] random: nonblocking pool is initialized
[   12.598099] Adding 1048572k swap on /dev/sda11.  Priority:-1 extents:1 across:1048572k FS
[   12.650806] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   12.667037] systemd-udevd[351]: starting version 204
[   12.910053] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
[   12.914301] lp: driver loaded but no devices found
[   12.950642] EXT4-fs (sda6): mounting ext2 file system using the ext4 subsystem
[   12.957432] EXT4-fs (sda6): mounted filesystem without journal. Opts: (null)
[   12.967484] ppdev: user-space parallel port driver
[   13.642763] wmi: Mapper loaded
[   13.656884] input: Ideapad extra buttons as /devices/platform/VPC2004:00/input/input12
[   13.666640] mei_me 0000:00:16.0: irq 48 for MSI/MSI-X
[   13.677027] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[   13.677034] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.677038] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
[   13.677041] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
[   13.677044] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \_SB_.PCI0.PEG1.PEGP.GPIO 3 (20131115/utaddress-251)
[   13.677049] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.677068] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
[   13.677071] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
[   13.677074] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \IO_D 3 (20131115/utaddress-251)
[   13.677077] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \_SB_.PCI0.PEG1.PEGP.GPIO 4 (20131115/utaddress-251)
[   13.677080] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.677082] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   13.680628] cfg80211: Calling CRDA to update world regulatory domain
[   13.884578] Intel(R) Wireless WiFi driver for Linux, in-tree:
[   13.884581] Copyright(c) 2003-2013 Intel Corporation
[   13.884742] iwlwifi 0000:09:00.0: irq 49 for MSI/MSI-X
[   13.979601] cfg80211: World regulatory domain updated:
[   13.979603] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   13.979605] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.979606] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.979607] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.979608] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.979609] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.093180] type=1400 audit(1409772389.836:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=520 comm="apparmor_parser"
[   14.093186] type=1400 audit(1409772389.836:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=520 comm="apparmor_parser"
[   14.093190] type=1400 audit(1409772389.836:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=520 comm="apparmor_parser"
[   14.093197] type=1400 audit(1409772389.836:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=521 comm="apparmor_parser"
[   14.093202] type=1400 audit(1409772389.836:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=521 comm="apparmor_parser"
[   14.093206] type=1400 audit(1409772389.836:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=521 comm="apparmor_parser"
[   14.093610] type=1400 audit(1409772389.836:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=520 comm="apparmor_parser"
[   14.093615] type=1400 audit(1409772389.836:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=520 comm="apparmor_parser"
[   14.093639] type=1400 audit(1409772389.836:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=521 comm="apparmor_parser"
[   14.093643] type=1400 audit(1409772389.836:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=521 comm="apparmor_parser"
[   14.136276] iwlwifi 0000:09:00.0: loaded firmware version 22.24.8.0 op_mode iwlmvm
[   14.337181] iwlwifi 0000:09:00.0: Detected Intel(R) Wireless N 7260, REV=0x144
[   14.337242] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S
[   14.337470] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S
[   14.405296] HDA driver get symbol successfully from i915 module
[   14.405387] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[   14.415732] SKU: Nid=0x0 sku_cfg=0x00003801
[   14.415735] SKU: port_connectivity=0x0
[   14.415736] SKU: enable_pcbeep=0x1
[   14.415737] SKU: check_sum=0x00000000
[   14.415738] SKU: customization=0x00000000
[   14.415739] SKU: external_amp=0x0
[   14.415739] SKU: platform_type=0x0
[   14.415740] SKU: swap=0x0
[   14.415741] SKU: override=0x1
[   14.416013] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   14.416015]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   14.416017]    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   14.416018]    mono: mono_out=0x0
[   14.416018]    inputs:
[   14.416020]      Mic=0x19
[   14.416021]      Internal Mic=0x12
[   14.416023] realtek: Enabling init ASM_ID=0x3801 CODEC_ID=10ec0282
[   14.416137] snd_hda_intel 0000:00:03.0: irq 51 for MSI/MSI-X
[   14.420545] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[   14.420612] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[   14.429778] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[   14.429848] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[   14.429908] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[   14.565562] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[   14.728236] Bluetooth: Core ver 2.17
[   14.728253] NET: Registered protocol family 31
[   14.728254] Bluetooth: HCI device and connection manager initialized
[   14.728261] Bluetooth: HCI socket layer initialized
[   14.728263] Bluetooth: L2CAP socket layer initialized
[   14.728266] Bluetooth: SCO socket layer initialized
[   14.800739] usbcore: registered new interface driver btusb
[   14.814268] Bluetooth: hci0: read Intel version: 370710018002030d00
[   14.839089] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[   14.914834] init: failsafe main process (789) killed by TERM signal
[   14.943281] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[   15.105452] Linux video capture interface: v2.00
[   15.180575] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (13d3:5170)
[   15.185499] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/input/input18
[   15.185569] usbcore: registered new interface driver uvcvideo
[   15.185571] USB Video Class driver (1.1.1)
[   15.968141] Bluetooth: RFCOMM TTY layer initialized
[   15.968152] Bluetooth: RFCOMM socket layer initialized
[   15.968157] Bluetooth: RFCOMM ver 1.11
[   16.126708] init: cups main process (1068) killed by HUP signal
[   16.126715] init: cups main process ended, respawning
[   16.230163] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   16.230165] Bluetooth: BNEP filters: protocol multicast
[   16.230172] Bluetooth: BNEP socket layer initialized
[   16.616349] Non-volatile memory driver v1.3
[   16.618310] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[   16.618312] thinkpad_acpi: http://ibm-acpi.sf.net/
[   16.618313] thinkpad_acpi: ThinkPad BIOS 8DCN39WW, EC unknown
[   16.618314] thinkpad_acpi: Lenovo Lenovo IdeaPad Z510, model 20287
[   16.618740] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
[   16.618745] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEG1.PEGP.DD02._BCL] (Node ffff8801d6130cf8), AE_NOT_FOUND (20131115/psparse-536)
[   16.618750] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[   16.618776] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[   16.618827] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[   16.619592] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input19
[   17.281202] r8169 0000:08:00.0 eth0: link down
[   17.281228] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.281453] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.282579] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   17.846143] init: samba-ad-dc main process (1255) terminated with status 1
[   18.077421] init: plymouth-upstart-bridge main process ended, respawning
[   18.082612] init: plymouth-upstart-bridge main process (1420) terminated with status 1
[   18.082620] init: plymouth-upstart-bridge main process ended, respawning
[   18.138214] bbswitch: version 0.7
[   18.138221] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[   18.138224] bbswitch: Found discrete VGA device 0000:07:00.0: \_SB_.PCI0.PEG1.PEGP
[   18.138232] ACPI Warning: \_SB_.PCI0.PEG1.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[   18.138276] bbswitch: detected an Optimus _DSM function
[   18.138285] pci 0000:07:00.0: enabling device (0006 -> 0007)
[   18.138318] bbswitch: Succesfully loaded. Discrete card 0000:07:00.0 is on
[   18.139830] bbswitch: disabling discrete graphics
[   18.139839] ACPI Warning: \_SB_.PCI0.PEG1.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[   27.004491] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S
[   27.004724] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S
[   27.016928] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   28.141649] init: Failed to spawn nvidia-persistenced main process: unable to execute: No such file or directory
[   28.467187] wlan0: authenticate with 00:1c:7b:f5:a5:8f
[   28.469216] wlan0: send auth to 00:1c:7b:f5:a5:8f (try 1/3)
[   28.471045] wlan0: authenticated
[   28.472026] wlan0: associate with 00:1c:7b:f5:a5:8f (try 1/3)
[   28.477207] wlan0: RX AssocResp from 00:1c:7b:f5:a5:8f (capab=0x411 status=0 aid=1)
[   28.478071] wlan0: associated
[   28.478098] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   45.501101] audit_printk_skb: 168 callbacks suppressed
[   45.501104] type=1400 audit(1409772421.246:68): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2620 comm="apparmor_parser"
[   45.501109] type=1400 audit(1409772421.246:69): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2620 comm="apparmor_parser"
[   45.501364] type=1400 audit(1409772421.246:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2620 comm="apparmor_parser"

"random: nonblocking pool is initialized" ile takas böümün bağlanması arasında 8 sn var görüldüğü gibi.. Bazen takas ondan önce bağlanıyor  ve "IPv6: ADDRCONF" ile arasında 20 sn (en fazla ölçtüğüm) fark oluyor. IPv6 kısmında bir sorun vardır diye onuda devre dışı bırakmıştım kernel parametresi girerek ama sonuç yine aynı oluyor.

[heartsmagic]

"random: nonblocking pool is initialized" sorunu için başkaları da bolca şikayet etmiş ama inan senin bulduğun çözümden başka bir şey göremedim. IPV6 konusu için sorayım, denetledin mi iptal edilmiş mi cidden? Gerçi iptal etme ile alakalı da olmayabilir senin durumundaki bekleme.

Kullandığın çekirdek sürümünü yükseltmeyi deneyebilirsin belki. 3.16 veya 3.16.1 denenebilir.

[if]

iwlwifi sürücüsünü swcrypto=0 11n_disable=1 bt_coex_active=0 parametreleriyle kullanınca bir değişiklik var mı?

[yasin y.]

Evet @heartsmagic Launchpad'de de açılmış bir başlık bununla alakalı ama bende işe yaramadı. IPv6'yı iptal ettiğimde alttaki sonuçlar kaybolmuştu

Kod Seç Genişlet

IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready


@if söyledğin parametreleri "iwlwifi.conf" dosyasına kopyaladım ancak açılış süresi 39 sn'den 58 sn'ye yükseldi. Bakmak istersin diye verdiğin parmetrelerle açılmış sistemin "dmesg" çıtısını veriyorum. Parametreleri silip çekirdeği  3.16 ya yükseltmeyi deniyeceğim şimdi.

Kod Seç Genişlet

[    0.650951] pcieport 0000:00:01.0: device [8086:0c01] has invalid IRQ; check vendor BIOS
[    0.651054] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.651090] pcieport 0000:00:01.1: device [8086:0c05] has invalid IRQ; check vendor BIOS
[    0.651160] pcieport 0000:00:01.1: irq 41 for MSI/MSI-X
[    0.651191] pcieport 0000:00:1c.0: device [8086:8c16] has invalid IRQ; check vendor BIOS
[    0.651264] pcieport 0000:00:1c.0: irq 42 for MSI/MSI-X
[    0.651305] pcieport 0000:00:1c.4: device [8086:8c18] has invalid IRQ; check vendor BIOS
[    0.651377] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
[    0.651436] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[    0.651439] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[    0.651447] pcieport 0000:00:01.1: Signaling PME through PCIe PME interrupt
[    0.651449] pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
[    0.651451] pcie_pme 0000:00:01.1:pcie01: service driver pcie_pme loaded
[    0.651465] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.651466] pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
[    0.651470] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.651483] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[    0.651485] pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
[    0.651488] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[    0.651497] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.651509] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.651538] efifb: probing for efifb
[    0.651926] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90010e80000, using 4160k, total 4160k
[    0.651927] efifb: mode is 1366x768x32, linelength=5504, pages=1
[    0.651928] efifb: scrolling: redraw
[    0.651929] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.654294] Console: switching to colour frame buffer device 170x48
[    0.656546] fb0: EFI VGA frame buffer device
[    0.656555] intel_idle: MWAIT substates: 0x42120
[    0.656556] intel_idle: v0.4 model 0x3C
[    0.656557] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.656635] ipmi message handler version 39.2
[    0.664066] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.664125] ACPI: AC Adapter [ADP0] (off-line)
[    0.664238] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    0.664255] ACPI: Lid Switch [LID0]
[    0.664276] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.664279] ACPI: Power Button [PWRB]
[    0.664299] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.664301] ACPI: Power Button [PWRF]
[    0.664464] GHES: HEST is not enabled!
[    0.664534] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.665718] Linux agpgart interface v0.103
[    0.666598] brd: module loaded
[    0.667068] loop: module loaded
[    0.667304] libphy: Fixed MDIO Bus: probed
[    0.667359] tun: Universal TUN/TAP device driver, 1.6
[    0.667360] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.667397] PPP generic driver version 2.4.2
[    0.667428] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.667431] ehci-pci: EHCI PCI platform driver
[    0.667521] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.667526] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.667537] ehci-pci 0000:00:1a.0: debug port 2
[    0.671434] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.671446] ehci-pci 0000:00:1a.0: irq 16, io mem 0xb571d000
[    0.680018] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.680046] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.680047] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.680049] usb usb1: Product: EHCI Host Controller
[    0.680050] usb usb1: Manufacturer: Linux 3.13.0-35-generic ehci_hcd
[    0.680051] usb usb1: SerialNumber: 0000:00:1a.0
[    0.680143] hub 1-0:1.0: USB hub found
[    0.680148] hub 1-0:1.0: 2 ports detected
[    0.680300] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.680303] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.680314] ehci-pci 0000:00:1d.0: debug port 2
[    0.684217] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.684228] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb571c000
[    0.696052] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.696088] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.696090] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.696091] usb usb2: Product: EHCI Host Controller
[    0.696092] usb usb2: Manufacturer: Linux 3.13.0-35-generic ehci_hcd
[    0.696094] usb usb2: SerialNumber: 0000:00:1d.0
[    0.696230] hub 2-0:1.0: USB hub found
[    0.696236] hub 2-0:1.0: 2 ports detected
[    0.696320] ehci-platform: EHCI generic platform driver
[    0.696326] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.696327] ohci-pci: OHCI PCI platform driver
[    0.696333] ohci-platform: OHCI generic platform driver
[    0.696337] uhci_hcd: USB Universal Host Controller Interface driver
[    0.696433] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.696436] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.696519] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.696535] xhci_hcd 0000:00:14.0: irq 44 for MSI/MSI-X
[    0.696584] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.696585] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.696586] usb usb3: Product: xHCI Host Controller
[    0.696588] usb usb3: Manufacturer: Linux 3.13.0-35-generic xhci_hcd
[    0.696589] usb usb3: SerialNumber: 0000:00:14.0
[    0.696720] hub 3-0:1.0: USB hub found
[    0.696738] hub 3-0:1.0: 14 ports detected
[    0.699286] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.699289] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.699322] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.699323] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.699325] usb usb4: Product: xHCI Host Controller
[    0.699326] usb usb4: Manufacturer: Linux 3.13.0-35-generic xhci_hcd
[    0.699327] usb usb4: SerialNumber: 0000:00:14.0
[    0.699457] hub 4-0:1.0: USB hub found
[    0.699468] hub 4-0:1.0: 4 ports detected
[    0.712144] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.725823] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.725827] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.726047] mousedev: PS/2 mouse device common for all mice
[    0.726490] rtc_cmos 00:06: RTC can wake from S4
[    0.726660] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    0.726687] rtc_cmos 00:06: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.726736] device-mapper: uevent: version 1.0.3
[    0.726800] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    0.726805] ledtrig-cpu: registered to indicate activity on CPUs
[    0.726807] EFI Variables Facility v0.08 2004-May-17
[    0.737916] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.751035] TCP: cubic registered
[    0.751101] NET: Registered protocol family 10
[    0.751219] NET: Registered protocol family 17
[    0.751229] Key type dns_resolver registered
[    0.751461] Loading compiled-in X.509 certificates
[    0.752166] Loaded X.509 cert 'Magrathea: Glacier signing key: b1414ae96c1b0ebb7c141fa405c1f6c98e8a66f0'
[    0.752174] registered taskstats version 1
[    0.753841] Key type trusted registered
[    0.755103] Key type encrypted registered
[    0.756369] AppArmor: AppArmor sha1 policy hashing enabled
[    0.756372] IMA: No TPM chip found, activating TPM-bypass!
[    0.756717] regulator-dummy: disabling
[    0.756778]   Magic number: 14:701:642
[    0.756865] rtc_cmos 00:06: setting system clock to 2014-09-04 17:36:22 UTC (1409852182)
[    0.757420] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.757422] EDD information not available.
[    0.757450] PM: Hibernation image not present or could not be loaded.
[    0.808122] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.808126] ACPI: Battery Slot [BAT0] (battery present)
[    0.808811] Freeing unused kernel memory: 1336K (ffffffff81d1f000 - ffffffff81e6d000)
[    0.808814] Write protecting the kernel read-only data: 12288k
[    0.810376] Freeing unused kernel memory: 808K (ffff880002736000 - ffff880002800000)
[    0.811507] Freeing unused kernel memory: 692K (ffff880002b53000 - ffff880002c00000)
[    0.827248] systemd-udevd[142]: starting version 204
[    0.845227] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.845234] r8169 0000:08:00.0: can't disable ASPM; OS doesn't have ASPM control
[    0.845428] r8169 0000:08:00.0: irq 45 for MSI/MSI-X
[    0.845533] r8169 0000:08:00.0 eth0: RTL8106e at 0xffffc90010e7c000, 28:d2:44:39:28:e6, XID 04900000 IRQ 45
[    0.846813] ahci 0000:00:1f.2: version 3.0
[    0.846943] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
[    0.846967] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    0.846988] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x14 impl SATA mode
[    0.846991] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst
[    0.847900] [drm] Initialized drm 1.1.0 20060810
[    0.847914] psmouse: module verification failed: signature and/or  required key missing - tainting kernel
[    0.852433] scsi0 : ahci
[    0.852517] scsi1 : ahci
[    0.852570] scsi2 : ahci
[    0.852625] scsi3 : ahci
[    0.852678] scsi4 : ahci
[    0.852713] ata1: DUMMY
[    0.852714] ata2: DUMMY
[    0.852718] ata3: SATA max UDMA/133 abar m2048@0xb571b000 port 0xb571b200 irq 46
[    0.852719] ata4: DUMMY
[    0.852722] ata5: SATA max UDMA/133 abar m2048@0xb571b000 port 0xb571b300 irq 46
[    0.864652] [drm] Memory usable by graphics device = 2048M
[    0.864656] checking generic (c0000000 410000) vs hw (c0000000 10000000)
[    0.864658] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
[    0.864670] Console: switching to colour dummy device 80x25
[    0.908095] i915 0000:00:02.0: irq 47 for MSI/MSI-X
[    0.908104] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    0.908105] [drm] Driver supports precise vblank timestamp query.
[    0.908196] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    0.992042] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.073617] fbcon: inteldrmfb (fb0) is primary device
[    1.124384] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[    1.124386] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.124651] hub 1-1:1.0: USB hub found
[    1.124753] hub 1-1:1.0: 6 ports detected
[    1.172059] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.176766] ata3.00: ATAPI: PLDS    DVD-RW DU8A5SH, NL61, max UDMA/100
[    1.177594] ata3.00: configured for UDMA/100
[    1.187777] scsi 2:0:0:0: CD-ROM            PLDS     DVD-RW DU8A5SH   NL61 PQ: 0 ANSI: 5
[    1.190596] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.190597] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.190720] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    1.190776] sr 2:0:0:0: Attached scsi generic sg0 type 5
[    1.236082] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.368391] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[    1.368392] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.368657] hub 2-1:1.0: USB hub found
[    1.368769] hub 2-1:1.0: 8 ports detected
[    1.508059] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.536078] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[    1.559929] ata5.00: ATA-9: ST1000LM014-1EJ164, LVD3, max UDMA/133
[    1.559931] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.604303] ata5.00: configured for UDMA/133
[    1.604444] scsi 4:0:0:0: Direct-Access     ATA      ST1000LM014-1EJ1 LVD3 PQ: 0 ANSI: 5
[    1.604555] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.604556] sd 4:0:0:0: [sda] 4096-byte physical blocks
[    1.604562] sd 4:0:0:0: Attached scsi generic sg1 type 0
[    1.604609] sd 4:0:0:0: [sda] Write Protect is off
[    1.604611] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.604710] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.608159]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11
[    1.608887] sd 4:0:0:0: [sda] Attached SCSI disk
[    1.658286] usb 3-1: New USB device found, idVendor=13d3, idProduct=5170
[    1.658287] usb 3-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    1.658288] usb 3-1: Product: Lenovo EasyCamera
[    1.658289] usb 3-1: Manufacturer: Azurewave
[    1.658290] usb 3-1: SerialNumber: NULL
[    1.828046] usb 3-7: new full-speed USB device number 3 using xhci_hcd
[    1.845082] usb 3-7: New USB device found, idVendor=8087, idProduct=07dc
[    1.845083] usb 3-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.012074] usb 3-10: new full-speed USB device number 4 using xhci_hcd
[    2.023152] input: ALPS PS/2 Device as /devices/platform/i8042/serio1/input/input6
[    2.033065] usb 3-10: New USB device found, idVendor=045e, idProduct=0745
[    2.033066] usb 3-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.033067] usb 3-10: Product: Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0
[    2.033068] usb 3-10: Manufacturer: Microsoft
[    2.035768] hidraw: raw HID events driver (C) Jiri Kosina
[    2.048605] usbcore: registered new interface driver usbhid
[    2.048605] usbhid: USB HID core driver
[    2.050206] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/input/input7
[    2.050279] hid-generic 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0] on usb-0000:00:14.0-10/input0
[    2.050747] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.1/input/input8
[    2.050831] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input5
[    2.050834] hid-generic 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0] on usb-0000:00:14.0-10/input1
[    2.060622] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.2/input/input9
[    2.060728] hid-generic 0003:045E:0745.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0] on usb-0000:00:14.0-10/input2
[    2.820143] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[    3.844052] Console: switching to colour frame buffer device 170x48
[    3.846102] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.846103] i915 0000:00:02.0: registered panic notifier
[    3.846462] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[    3.846770] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[    3.846847] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
[    3.846850] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEG1.PEGP.DD02._BCL] (Node ffff8801d6130cf8), AE_NOT_FOUND (20131115/psparse-536)
[    3.846890] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:40/LNXVIDEO:00/input/input10
[    3.853098] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.853355] acpi device:5a: registered as cooling_device4
[    3.853411] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input11
[    3.853469] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    3.952902] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[    5.735818] random: init urandom read with 111 bits of entropy available
[    6.194382] random: nonblocking pool is initialized
[   24.867126] Adding 1048572k swap on /dev/sda11.  Priority:-1 extents:1 across:1048572k FS
[   24.963594] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   25.114926] systemd-udevd[350]: starting version 204
[   25.228049] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
[   25.251135] EXT4-fs (sda6): mounting ext2 file system using the ext4 subsystem
[   25.268828] EXT4-fs (sda6): mounted filesystem without journal. Opts: (null)
[   25.484177] lp: driver loaded but no devices found
[   25.574155] ppdev: user-space parallel port driver
[   26.622262] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[   26.622267] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   26.622271] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
[   26.622273] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
[   26.622276] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \_SB_.PCI0.PEG1.PEGP.GPIO 3 (20131115/utaddress-251)
[   26.622278] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   26.622279] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
[   26.622281] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
[   26.622282] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \IO_D 3 (20131115/utaddress-251)
[   26.622284] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \_SB_.PCI0.PEG1.PEGP.GPIO 4 (20131115/utaddress-251)
[   26.622286] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   26.622287] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   26.624747] wmi: Mapper loaded
[   26.679278] input: Ideapad extra buttons as /devices/platform/VPC2004:00/input/input12
[   26.703166] mei_me 0000:00:16.0: irq 48 for MSI/MSI-X
[   26.940972] type=1400 audit(1409841408.680:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=487 comm="apparmor_parser"
[   26.940977] type=1400 audit(1409841408.680:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=487 comm="apparmor_parser"
[   26.940980] type=1400 audit(1409841408.680:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=487 comm="apparmor_parser"
[   26.941279] type=1400 audit(1409841408.680:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=487 comm="apparmor_parser"
[   26.941283] type=1400 audit(1409841408.680:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=487 comm="apparmor_parser"
[   26.941440] type=1400 audit(1409841408.680:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=487 comm="apparmor_parser"
[   26.964950] cfg80211: Calling CRDA to update world regulatory domain
[   27.176829] HDA driver get symbol successfully from i915 module
[   27.176953] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[   27.177581] cfg80211: World regulatory domain updated:
[   27.177583] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   27.177585] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   27.177587] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   27.177588] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   27.177590] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   27.177591] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   27.184051] snd_hda_intel 0000:00:03.0: irq 50 for MSI/MSI-X
[   27.238079] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[   27.239332] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[   27.239455] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[   27.239568] SKU: Nid=0x0 sku_cfg=0x00003801
[   27.239570] SKU: port_connectivity=0x0
[   27.239571] SKU: enable_pcbeep=0x1
[   27.239572] SKU: check_sum=0x00000000
[   27.239573] SKU: customization=0x00000000
[   27.239574] SKU: external_amp=0x0
[   27.239575] SKU: platform_type=0x0
[   27.239576] SKU: swap=0x0
[   27.239577] SKU: override=0x1
[   27.239806] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   27.239808]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   27.239809]    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   27.239810]    mono: mono_out=0x0
[   27.239811]    inputs:
[   27.239813]      Mic=0x19
[   27.239814]      Internal Mic=0x12
[   27.239815] realtek: Enabling init ASM_ID=0x3801 CODEC_ID=10ec0282
[   27.244564] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
[   27.245350] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[   27.543304] Intel(R) Wireless WiFi driver for Linux, in-tree:
[   27.543307] Copyright(c) 2003-2013 Intel Corporation
[   27.543443] iwlwifi 0000:09:00.0: irq 51 for MSI/MSI-X
[   27.810184] iwlwifi 0000:09:00.0: loaded firmware version 22.24.8.0 op_mode iwlmvm
[   27.979624] Bluetooth: Core ver 2.17
[   27.979638] NET: Registered protocol family 31
[   27.979640] Bluetooth: HCI device and connection manager initialized
[   27.979647] Bluetooth: HCI socket layer initialized
[   27.979649] Bluetooth: L2CAP socket layer initialized
[   27.979656] Bluetooth: SCO socket layer initialized
[   27.993928] iwlwifi 0000:09:00.0: Detected Intel(R) Wireless N 7260, REV=0x144
[   27.993987] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S
[   27.994213] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S
[   28.076367] usbcore: registered new interface driver btusb
[   28.089289] Bluetooth: hci0: read Intel version: 370710018002030d00
[   28.124770] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[   28.261734] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[   28.295277] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[   28.451203] Linux video capture interface: v2.00
[   28.595731] init: failsafe main process (803) killed by TERM signal
[   28.596535] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (13d3:5170)
[   28.601713] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/input/input18
[   28.601794] usbcore: registered new interface driver uvcvideo
[   28.601796] USB Video Class driver (1.1.1)
[   28.782942] type=1400 audit(1409841410.520:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=940 comm="apparmor_parser"
[   28.782947] type=1400 audit(1409841410.520:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=940 comm="apparmor_parser"
[   28.782950] type=1400 audit(1409841410.520:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=940 comm="apparmor_parser"
[   28.783327] type=1400 audit(1409841410.520:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=940 comm="apparmor_parser"
[   29.600582] init: cups main process (1041) killed by HUP signal
[   29.600590] init: cups main process ended, respawning
[   29.759359] Bluetooth: RFCOMM TTY layer initialized
[   29.759369] Bluetooth: RFCOMM socket layer initialized
[   29.759373] Bluetooth: RFCOMM ver 1.11
[   29.846132] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   29.846136] Bluetooth: BNEP filters: protocol multicast
[   29.846144] Bluetooth: BNEP socket layer initialized
[   30.875863] Non-volatile memory driver v1.3
[   30.877815] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[   30.877817] thinkpad_acpi: http://ibm-acpi.sf.net/
[   30.877818] thinkpad_acpi: ThinkPad BIOS 8DCN39WW, EC unknown
[   30.877819] thinkpad_acpi: Lenovo Lenovo IdeaPad Z510, model 20287
[   30.878405] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
[   30.878411] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEG1.PEGP.DD02._BCL] (Node ffff8801d6130cf8), AE_NOT_FOUND (20131115/psparse-536)
[   30.878420] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[   30.878457] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[   30.878579] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[   30.880838] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input19
[   31.627094] init: samba-ad-dc main process (1281) terminated with status 1
[   31.641221] r8169 0000:08:00.0 eth0: link down
[   31.641248] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   31.648517] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   31.649966] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   32.529761] init: plymouth-upstart-bridge main process ended, respawning
[   32.535817] init: plymouth-upstart-bridge main process (1416) terminated with status 1
[   32.535827] init: plymouth-upstart-bridge main process ended, respawning
[   32.621980] bbswitch: version 0.7
[   32.621987] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[   32.621990] bbswitch: Found discrete VGA device 0000:07:00.0: \_SB_.PCI0.PEG1.PEGP
[   32.621998] ACPI Warning: \_SB_.PCI0.PEG1.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[   32.622043] bbswitch: detected an Optimus _DSM function
[   32.622052] pci 0000:07:00.0: enabling device (0006 -> 0007)
[   32.622085] bbswitch: Succesfully loaded. Discrete card 0000:07:00.0 is on
[   32.623373] bbswitch: disabling discrete graphics
[   32.623391] ACPI Warning: \_SB_.PCI0.PEG1.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[   42.003221] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S
[   42.003462] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S
[   42.015683] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   42.630240] init: Failed to spawn nvidia-persistenced main process: unable to execute: No such file or directory
[   43.451795] wlan0: authenticate with 00:1c:7b:f5:a5:8f
[   43.453830] wlan0: send auth to 00:1c:7b:f5:a5:8f (try 1/3)
[   43.457049] wlan0: authenticated
[   43.460048] wlan0: associate with 00:1c:7b:f5:a5:8f (try 1/3)
[   43.463454] wlan0: RX AssocResp from 00:1c:7b:f5:a5:8f (capab=0x411 status=0 aid=3)
[   43.464425] wlan0: associated
[   43.464445] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   59.170423] audit_printk_skb: 150 callbacks suppressed
[   59.170426] type=1400 audit(1409841440.908:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2597 comm="apparmor_parser"
[   59.170430] type=1400 audit(1409841440.908:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2597 comm="apparmor_parser"
[   59.170674] type=1400 audit(1409841440.908:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2597 comm="apparmor_parser"


edit: @if tuhaftır verdiğin  parametrleri sildikten sonra sistem 10 sn de açıldı Bu açılışn da dmesg çıtısı :

Kod Seç Genişlet

[    0.660303] ACPI: Power Button [PWRF]
[    0.660472] GHES: HEST is not enabled!
[    0.660528] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.661728] Linux agpgart interface v0.103
[    0.662589] brd: module loaded
[    0.663058] loop: module loaded
[    0.663293] libphy: Fixed MDIO Bus: probed
[    0.663348] tun: Universal TUN/TAP device driver, 1.6
[    0.663349] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.663386] PPP generic driver version 2.4.2
[    0.663418] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.663421] ehci-pci: EHCI PCI platform driver
[    0.663511] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.663515] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.663526] ehci-pci 0000:00:1a.0: debug port 2
[    0.667434] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.667446] ehci-pci 0000:00:1a.0: irq 16, io mem 0xb571d000
[    0.676019] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.676047] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.676048] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.676049] usb usb1: Product: EHCI Host Controller
[    0.676051] usb usb1: Manufacturer: Linux 3.13.0-35-generic ehci_hcd
[    0.676052] usb usb1: SerialNumber: 0000:00:1a.0
[    0.676143] hub 1-0:1.0: USB hub found
[    0.676148] hub 1-0:1.0: 2 ports detected
[    0.676300] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.676303] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.676313] ehci-pci 0000:00:1d.0: debug port 2
[    0.680216] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.680227] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb571c000
[    0.692053] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.692088] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.692090] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.692091] usb usb2: Product: EHCI Host Controller
[    0.692093] usb usb2: Manufacturer: Linux 3.13.0-35-generic ehci_hcd
[    0.692094] usb usb2: SerialNumber: 0000:00:1d.0
[    0.692230] hub 2-0:1.0: USB hub found
[    0.692236] hub 2-0:1.0: 2 ports detected
[    0.692320] ehci-platform: EHCI generic platform driver
[    0.692326] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.692327] ohci-pci: OHCI PCI platform driver
[    0.692333] ohci-platform: OHCI generic platform driver
[    0.692337] uhci_hcd: USB Universal Host Controller Interface driver
[    0.692433] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.692437] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.692521] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.692537] xhci_hcd 0000:00:14.0: irq 44 for MSI/MSI-X
[    0.692585] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.692586] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.692587] usb usb3: Product: xHCI Host Controller
[    0.692589] usb usb3: Manufacturer: Linux 3.13.0-35-generic xhci_hcd
[    0.692590] usb usb3: SerialNumber: 0000:00:14.0
[    0.692720] hub 3-0:1.0: USB hub found
[    0.692737] hub 3-0:1.0: 14 ports detected
[    0.695287] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.695290] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.695323] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.695325] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.695326] usb usb4: Product: xHCI Host Controller
[    0.695327] usb usb4: Manufacturer: Linux 3.13.0-35-generic xhci_hcd
[    0.695328] usb usb4: SerialNumber: 0000:00:14.0
[    0.695458] hub 4-0:1.0: USB hub found
[    0.695469] hub 4-0:1.0: 4 ports detected
[    0.708145] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.721875] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.721879] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.722099] mousedev: PS/2 mouse device common for all mice
[    0.722555] rtc_cmos 00:06: RTC can wake from S4
[    0.722724] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    0.722751] rtc_cmos 00:06: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.722800] device-mapper: uevent: version 1.0.3
[    0.722862] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    0.722867] ledtrig-cpu: registered to indicate activity on CPUs
[    0.722868] EFI Variables Facility v0.08 2004-May-17
[    0.738819] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.748294] TCP: cubic registered
[    0.748362] NET: Registered protocol family 10
[    0.748478] NET: Registered protocol family 17
[    0.748485] Key type dns_resolver registered
[    0.748717] Loading compiled-in X.509 certificates
[    0.749418] Loaded X.509 cert 'Magrathea: Glacier signing key: b1414ae96c1b0ebb7c141fa405c1f6c98e8a66f0'
[    0.749426] registered taskstats version 1
[    0.751086] Key type trusted registered
[    0.752431] Key type encrypted registered
[    0.754889] AppArmor: AppArmor sha1 policy hashing enabled
[    0.754892] IMA: No TPM chip found, activating TPM-bypass!
[    0.755235] regulator-dummy: disabling
[    0.755281]   Magic number: 14:13:946
[    0.755305] tty tty3: hash matches
[    0.755331] processor cpu1: hash matches
[    0.755381] rtc_cmos 00:06: setting system clock to 2014-09-04 17:54:27 UTC (1409853267)
[    0.755929] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.755930] EDD information not available.
[    0.755959] PM: Hibernation image not present or could not be loaded.
[    0.808121] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.808128] ACPI: Battery Slot [BAT0] (battery present)
[    0.808808] Freeing unused kernel memory: 1336K (ffffffff81d1f000 - ffffffff81e6d000)
[    0.808810] Write protecting the kernel read-only data: 12288k
[    0.810413] Freeing unused kernel memory: 808K (ffff880002736000 - ffff880002800000)
[    0.811545] Freeing unused kernel memory: 692K (ffff880002b53000 - ffff880002c00000)
[    0.826651] systemd-udevd[143]: starting version 204
[    0.845802] psmouse: module verification failed: signature and/or  required key missing - tainting kernel
[    0.845805] [drm] Initialized drm 1.1.0 20060810
[    0.845962] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.845971] r8169 0000:08:00.0: can't disable ASPM; OS doesn't have ASPM control
[    0.846186] ahci 0000:00:1f.2: version 3.0
[    0.846189] r8169 0000:08:00.0: irq 45 for MSI/MSI-X
[    0.846286] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
[    0.846308] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    0.846324] r8169 0000:08:00.0 eth0: RTL8106e at 0xffffc90010c98000, 28:d2:44:39:28:e6, XID 04900000 IRQ 45
[    0.846332] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x14 impl SATA mode
[    0.846335] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst
[    0.852375] scsi0 : ahci
[    0.856028] scsi1 : ahci
[    0.856081] scsi2 : ahci
[    0.856139] scsi3 : ahci
[    0.856187] scsi4 : ahci
[    0.856212] ata1: DUMMY
[    0.856212] ata2: DUMMY
[    0.856215] ata3: SATA max UDMA/133 abar m2048@0xb571b000 port 0xb571b200 irq 46
[    0.856216] ata4: DUMMY
[    0.856218] ata5: SATA max UDMA/133 abar m2048@0xb571b000 port 0xb571b300 irq 46
[    0.863974] [drm] Memory usable by graphics device = 2048M
[    0.863978] checking generic (c0000000 410000) vs hw (c0000000 10000000)
[    0.863980] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
[    0.863992] Console: switching to colour dummy device 80x25
[    0.912098] i915 0000:00:02.0: irq 47 for MSI/MSI-X
[    0.912107] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    0.912108] [drm] Driver supports precise vblank timestamp query.
[    0.912199] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    0.996072] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.077587] fbcon: inteldrmfb (fb0) is primary device
[    1.128394] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[    1.128395] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.128530] hub 1-1:1.0: USB hub found
[    1.128616] hub 1-1:1.0: 6 ports detected
[    1.176045] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.180586] ata3.00: ATAPI: PLDS    DVD-RW DU8A5SH, NL61, max UDMA/100
[    1.181379] ata3.00: configured for UDMA/100
[    1.183542] scsi 2:0:0:0: CD-ROM            PLDS     DVD-RW DU8A5SH   NL61 PQ: 0 ANSI: 5
[    1.186169] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.186170] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.186260] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    1.186304] sr 2:0:0:0: Attached scsi generic sg0 type 5
[    1.240061] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.372399] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[    1.372400] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.372664] hub 2-1:1.0: USB hub found
[    1.372754] hub 2-1:1.0: 8 ports detected
[    1.504059] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.540093] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[    1.541944] ata5.00: ATA-9: ST1000LM014-1EJ164, LVD3, max UDMA/133
[    1.541946] ata5.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.586389] ata5.00: configured for UDMA/133
[    1.586524] scsi 4:0:0:0: Direct-Access     ATA      ST1000LM014-1EJ1 LVD3 PQ: 0 ANSI: 5
[    1.586667] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.586669] sd 4:0:0:0: [sda] 4096-byte physical blocks
[    1.586670] sd 4:0:0:0: Attached scsi generic sg1 type 0
[    1.586751] sd 4:0:0:0: [sda] Write Protect is off
[    1.586753] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.586832] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.590241]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11
[    1.590750] sd 4:0:0:0: [sda] Attached SCSI disk
[    1.662565] usb 3-1: New USB device found, idVendor=13d3, idProduct=5170
[    1.662566] usb 3-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    1.662567] usb 3-1: Product: Lenovo EasyCamera
[    1.662568] usb 3-1: Manufacturer: Azurewave
[    1.662568] usb 3-1: SerialNumber: NULL
[    1.780043] usb 3-7: new full-speed USB device number 3 using xhci_hcd
[    1.797058] usb 3-7: New USB device found, idVendor=8087, idProduct=07dc
[    1.797059] usb 3-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.964105] usb 3-10: new full-speed USB device number 4 using xhci_hcd
[    1.985043] usb 3-10: New USB device found, idVendor=045e, idProduct=0745
[    1.985044] usb 3-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.985045] usb 3-10: Product: Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0
[    1.985046] usb 3-10: Manufacturer: Microsoft
[    1.987753] hidraw: raw HID events driver (C) Jiri Kosina
[    2.000670] usbcore: registered new interface driver usbhid
[    2.000671] usbhid: USB HID core driver
[    2.001852] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/input/input16
[    2.001927] hid-generic 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0] on usb-0000:00:14.0-10/input0
[    2.002459] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.1/input/input17
[    2.002574] hid-generic 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0] on usb-0000:00:14.0-10/input1
[    2.011975] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.2/input/input18
[    2.012093] hid-generic 0003:045E:0745.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0] on usb-0000:00:14.0-10/input2
[    2.031300] input: ALPS PS/2 Device as /devices/platform/i8042/serio1/input/input15
[    2.052064] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input14
[    2.796157] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[    3.820057] Console: switching to colour frame buffer device 170x48
[    3.823481] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.823483] i915 0000:00:02.0: registered panic notifier
[    3.823811] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[    3.824089] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[    3.824188] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
[    3.824193] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEG1.PEGP.DD02._BCL] (Node ffff8801d6130cf8), AE_NOT_FOUND (20131115/psparse-536)
[    3.824243] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:40/LNXVIDEO:00/input/input19
[    3.833396] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.833623] acpi device:5a: registered as cooling_device4
[    3.833672] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input20
[    3.833724] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    3.932653] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[    4.039777] random: nonblocking pool is initialized
[    6.394457] Adding 1048572k swap on /dev/sda11.  Priority:-1 extents:1 across:1048572k FS
[    6.401643] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    6.435962] systemd-udevd[361]: starting version 204
[    6.469333] lp: driver loaded but no devices found
[    6.480693] ppdev: user-space parallel port driver
[    6.514931] wmi: Mapper loaded
[    6.544971] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
[    6.575994] EXT4-fs (sda6): mounting ext2 file system using the ext4 subsystem
[    6.591115] EXT4-fs (sda6): mounted filesystem without journal. Opts: (null)
[    6.603415] input: Ideapad extra buttons as /devices/platform/VPC2004:00/input/input21
[    6.621920] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[    6.621927] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.621931] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
[    6.621934] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
[    6.621937] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \_SB_.PCI0.PEG1.PEGP.GPIO 3 (20131115/utaddress-251)
[    6.621940] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.621942] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
[    6.621945] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
[    6.621948] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \IO_D 3 (20131115/utaddress-251)
[    6.621951] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \_SB_.PCI0.PEG1.PEGP.GPIO 4 (20131115/utaddress-251)
[    6.621953] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.621955] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    6.638016] mei_me 0000:00:16.0: irq 48 for MSI/MSI-X
[    6.645102] cfg80211: Calling CRDA to update world regulatory domain
[    6.659338] type=1400 audit(1409842473.400:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=470 comm="apparmor_parser"
[    6.659343] type=1400 audit(1409842473.400:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=470 comm="apparmor_parser"
[    6.659345] type=1400 audit(1409842473.400:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=470 comm="apparmor_parser"
[    6.659599] type=1400 audit(1409842473.400:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=470 comm="apparmor_parser"
[    6.659602] type=1400 audit(1409842473.400:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=470 comm="apparmor_parser"
[    6.659749] type=1400 audit(1409842473.400:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=470 comm="apparmor_parser"
[    6.660410] Intel(R) Wireless WiFi driver for Linux, in-tree:
[    6.660412] Copyright(c) 2003-2013 Intel Corporation
[    6.660570] iwlwifi 0000:09:00.0: irq 49 for MSI/MSI-X
[    6.716075] iwlwifi 0000:09:00.0: loaded firmware version 22.24.8.0 op_mode iwlmvm
[    6.743865] iwlwifi 0000:09:00.0: Detected Intel(R) Wireless N 7260, REV=0x144
[    6.743932] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S
[    6.744176] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S
[    6.815055] cfg80211: World regulatory domain updated:
[    6.815058] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    6.815060] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.815061] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.815062] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    6.815063] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.815065] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.829912] HDA driver get symbol successfully from i915 module
[    6.830130] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[    6.836293] snd_hda_intel 0000:00:03.0: irq 51 for MSI/MSI-X
[    6.842871] SKU: Nid=0x0 sku_cfg=0x00003801
[    6.842875] SKU: port_connectivity=0x0
[    6.842876] SKU: enable_pcbeep=0x1
[    6.842877] SKU: check_sum=0x00000000
[    6.842878] SKU: customization=0x00000000
[    6.842879] SKU: external_amp=0x0
[    6.842880] SKU: platform_type=0x0
[    6.842880] SKU: swap=0x0
[    6.842881] SKU: override=0x1
[    6.843087] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    6.843088]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    6.843089]    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    6.843090]    mono: mono_out=0x0
[    6.843090]    inputs:
[    6.843091]      Mic=0x19
[    6.843092]      Internal Mic=0x12
[    6.843093] realtek: Enabling init ASM_ID=0x3801 CODEC_ID=10ec0282
[    6.847665] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input23
[    6.847750] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input22
[    6.897702] Bluetooth: Core ver 2.17
[    6.897719] NET: Registered protocol family 31
[    6.897721] Bluetooth: HCI device and connection manager initialized
[    6.897727] Bluetooth: HCI socket layer initialized
[    6.897730] Bluetooth: L2CAP socket layer initialized
[    6.897735] Bluetooth: SCO socket layer initialized
[    6.898891] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input26
[    6.899074] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input25
[    6.899202] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input24
[    6.902172] type=1400 audit(1409842473.644:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=644 comm="apparmor_parser"
[    6.902180] type=1400 audit(1409842473.644:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=644 comm="apparmor_parser"
[    6.902569] type=1400 audit(1409842473.644:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=644 comm="apparmor_parser"
[    6.908455] Bluetooth: RFCOMM TTY layer initialized
[    6.908466] Bluetooth: RFCOMM socket layer initialized
[    6.908470] Bluetooth: RFCOMM ver 1.11
[    6.910399] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    6.910402] Bluetooth: BNEP filters: protocol multicast
[    6.910410] Bluetooth: BNEP socket layer initialized
[    6.970443] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    7.018170] init: cups main process (651) killed by HUP signal
[    7.018178] init: cups main process ended, respawning
[    7.019531] init: failsafe main process (668) killed by TERM signal
[    7.133233] type=1400 audit(1409842473.876:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=836 comm="apparmor_parser"
[    7.244132] init: samba-ad-dc main process (882) terminated with status 1
[    7.405343] r8169 0000:08:00.0 eth0: link down
[    7.405445] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    7.405930] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    7.408258] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    7.731390] Linux video capture interface: v2.00
[    7.763224] Non-volatile memory driver v1.3
[    7.765536] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[    7.765539] thinkpad_acpi: http://ibm-acpi.sf.net/
[    7.765539] thinkpad_acpi: ThinkPad BIOS 8DCN39WW, EC unknown
[    7.765540] thinkpad_acpi: Lenovo Lenovo IdeaPad Z510, model 20287
[    7.766182] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
[    7.766188] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEG1.PEGP.DD02._BCL] (Node ffff8801d6130cf8), AE_NOT_FOUND (20131115/psparse-536)
[    7.766196] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[    7.766237] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[    7.766422] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[    7.771622] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input27
[    7.792463] usbcore: registered new interface driver btusb
[    7.806252] Bluetooth: hci0: read Intel version: 370710018002030d37
[    7.806254] Bluetooth: hci0: Intel device is already patched. patch num: 37
[    7.808604] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (13d3:5170)
[    7.813635] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/input/input28
[    7.813798] usbcore: registered new interface driver uvcvideo
[    7.813800] USB Video Class driver (1.1.1)
[    8.030203] init: plymouth-upstart-bridge main process ended, respawning
[    8.035591] init: plymouth-upstart-bridge main process (1380) terminated with status 1
[    8.035602] init: plymouth-upstart-bridge main process ended, respawning
[    8.063152] bbswitch: version 0.7
[    8.063157] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[    8.063160] bbswitch: Found discrete VGA device 0000:07:00.0: \_SB_.PCI0.PEG1.PEGP
[    8.063168] ACPI Warning: \_SB_.PCI0.PEG1.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[    8.063215] bbswitch: detected an Optimus _DSM function
[    8.063224] pci 0000:07:00.0: enabling device (0006 -> 0007)
[    8.063261] bbswitch: Succesfully loaded. Discrete card 0000:07:00.0 is on
[    8.065071] bbswitch: disabling discrete graphics
[    8.065079] ACPI Warning: \_SB_.PCI0.PEG1.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[   17.010584] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S
[   17.010815] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S
[   17.023328] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   18.067023] init: Failed to spawn nvidia-persistenced main process: unable to execute: No such file or directory
[   36.969454] audit_printk_skb: 150 callbacks suppressed
[   36.969456] type=1400 audit(1409842503.712:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2084 comm="apparmor_parser"
[   36.969461] type=1400 audit(1409842503.712:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2084 comm="apparmor_parser"
[   36.969712] type=1400 audit(1409842503.712:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2084 comm="apparmor_parser"
[   46.805417] wlan0: authenticate with 00:1c:7b:f5:a5:8f
[   46.807440] wlan0: send auth to 00:1c:7b:f5:a5:8f (try 1/3)
[   46.809308] wlan0: authenticated
[   46.812083] wlan0: associate with 00:1c:7b:f5:a5:8f (try 1/3)
[   46.815579] wlan0: RX AssocResp from 00:1c:7b:f5:a5:8f (capab=0x411 status=0 aid=1)
[   46.819751] wlan0: associated
[   46.819774] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   54.025111] wlan0: deauthenticated from 00:1c:7b:f5:a5:8f (Reason: 15)
[   54.037406] cfg80211: Calling CRDA to update world regulatory domain
[   54.039363] cfg80211: World regulatory domain updated:
[   54.039365] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   54.039367] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   54.039368] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   54.039369] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   54.039370] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   54.039371] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  137.235666] r8169 0000:08:00.0 eth0: link up
[  137.235682] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  222.869327] r8169 0000:08:00.0 eth0: link down
[  227.201083] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  263.273580] wlan0: authenticate with 00:1c:7b:f5:a5:8f
[  263.275413] wlan0: send auth to 00:1c:7b:f5:a5:8f (try 1/3)
[  263.277242] wlan0: authenticated
[  263.280065] wlan0: associate with 00:1c:7b:f5:a5:8f (try 1/3)
[  263.283520] wlan0: RX AssocResp from 00:1c:7b:f5:a5:8f (capab=0x411 status=0 aid=1)
[  263.284344] wlan0: associated
[  263.584277] iwlwifi 0000:09:00.0: No association and the time event is over already...
[  263.584316] wlan0: Connection to AP 00:1c:7b:f5:a5:8f lost
[  263.593341] cfg80211: Calling CRDA to update world regulatory domain
[  263.595187] cfg80211: World regulatory domain updated:
[  263.595190] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  263.595191] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  263.595192] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  263.595193] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  263.595194] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  263.595195] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  267.323983] wlan0: authenticate with 00:1c:7b:f5:a5:8f
[  267.325722] wlan0: send auth to 00:1c:7b:f5:a5:8f (try 1/3)
[  267.327562] wlan0: authenticated
[  267.328086] wlan0: associate with 00:1c:7b:f5:a5:8f (try 1/3)
[  267.331472] wlan0: RX AssocResp from 00:1c:7b:f5:a5:8f (capab=0x411 status=0 aid=1)
[  267.336899] wlan0: associated


edit 2 : 3.16.1 çekirdeği 15 saniyede boot etti isterseniz bunuda dmesg ve bootchart çıktısını verebilirim.

[if]

iwlwifi üzerinde yaptığımız değişikliklerin açılış süresine hiç bir etkisi olmamış aslında. Ben ağ bağlantısının geç yapılmasının etkisi olabileceğini düşünerekten önermiştim. 3.16 ile bir kaç kere yeniden başlatın. Süreler değişiklik gösteriyor demiştiniz. 3.16'da 10 sn ve yakın değerlerde açılıyorsa böyle devam ederiz.

Swap'ı /etc/fstab'dan kaldırınca değişiklik var mı?

[yasin y.]

Takas bölümünün açılış hızına etkisi olabileceğini biryerde okumuştum. Sonradan oluşturup fstab'a elle ben ekledim aksi halde sistem açıldıktan sonra elle bağlamam gerekiyordu. Dediğiniz gibi 3.16 ile bir-iki gün deneme yaptıktan sonra swapı fstabdan dediğiniz gibi kaldırırım.