Pavilion dv6 kablolu/kablosuz ağ sorunu

[lsdc]

Merhaba. Dizüstü bilgisayarıma ubuntu 12.04 kurdum. Kablosuz adaptör fiziksel olarak açık olmasına rağmen sağ üstteki ağ simgesine tıkladığımda karşıma herhangi bir kablosuz ağ gelmiyor. Yardımcı olursanız çok sevinirim. Uç birim çıktıları alttadır.

Kod Seç Genişlet


        DISTRIB_ID=Ubuntu
        DISTRIB_RELEASE=12.04
        DISTRIB_CODENAME=precise
        DISTRIB_DESCRIPTION="Ubuntu 12.04.4 LTS"


Kod Seç Genişlet


        Linux Administrator 3.11.0-15-generic #25~precise1-Ubuntu SMP Thu Jan 30 17:39:31 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux


Kod Seç Genişlet


        00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.3 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
00:1f.6 Signal processing controller: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem (rev 03)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV710/M92 [Mobility Radeon HD 4530/4570/545v]
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] RV710/730 HDMI Audio [Radeon HD 4000 series]
02:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 02)
06:00.0 FireWire (IEEE 1394): JMicron Technology Corp. IEEE 1394 Host Controller
06:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller
06:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller
06:00.3 System peripheral: JMicron Technology Corp. MS Host Controller
06:00.4 System peripheral: JMicron Technology Corp. xD Host Controller



Kod Seç Genişlet



Bus 002 Device 002: ID 0408:03f1 Quanta Computer, Inc.
Bus 004 Device 002: ID 046d:c52f Logitech, Inc. Wireless Mouse M305
Bus 007 Device 002: ID 03f0:171d Hewlett-Packard Bluetooth 2.0 Interface [Broadcom BCM2045]
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub





Kod Seç Genişlet


0: hp-wifi: Wireless LAN
Soft blocked: no
Hard blocked: no
1: hp-bluetooth: Bluetooth
Soft blocked: no
Hard blocked: no
2: hci0: Bluetooth
Soft blocked: no
Hard blocked: no



Kod Seç Genişlet



*-network               
       description: Network controller
       product: BCM4312 802.11b/g LP-PHY
       vendor: Broadcom Corporation
       physical id: 0
       bus info: pci@0000:02:00.0
       version: 01
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress bus_master cap_list
       configuration: driver=b43-pci-bridge latency=0
       resources: irq:16 memory:d9000000-d9003fff
  *-network DISABLED
       description: Ethernet interface
       product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:03:00.0
       logical name: eth0
       version: 02
       size: 10Mbit/s
       capacity: 1Gbit/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s
       resources: irq:46 ioport:5000(size=256) memory:d1010000-d1010fff memory:d1000000-d100ffff memory:d1020000-d102ffff



Kod Seç Genişlet





lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:288 errors:0 dropped:0 overruns:0 frame:0
          TX packets:288 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:23328 (23.3 KB)  TX bytes:23328 (23.3 KB)

[code]


[code]

eth0      no wireless extensions.

lo        no wireless extensions.




Kod Seç Genişlet





eth0      Interface doesn't support scanning.

lo        Interface doesn't support scanning.



Kod Seç Genişlet



Module                  Size  Used by
snd_hda_codec_hdmi     41736  1
bnep                   24107  2
rfcomm                 74718  12
parport_pc             32866  0
ppdev                  17711  0
b43                   397389  0
snd_hda_codec_idt      55053  1
snd_hda_intel          53038  5
mac80211              619465  1 b43
snd_hda_codec         194727  3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel
radeon               1447330  3
snd_hwdep              13613  1 snd_hda_codec
snd_pcm               107140  3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
uvcvideo               82247  0
snd_seq_midi           13324  0
snd_rawmidi            30416  1 snd_seq_midi
cfg80211              499466  2 b43,mac80211
snd_seq_midi_event     14899  1 snd_seq_midi
videobuf2_core         40815  1 uvcvideo
videodev              138562  2 uvcvideo,videobuf2_core
videobuf2_vmalloc      13216  1 uvcvideo
videobuf2_memops       13362  1 videobuf2_vmalloc
btusb                  28374  0
snd_seq                66061  2 snd_seq_midi,snd_seq_midi_event
ttm                    84837  1 radeon
hp_wmi                 18202  0
joydev                 17613  0
bluetooth             391726  24 bnep,rfcomm,btusb
drm_kms_helper         53237  1 radeon
snd_timer              29989  2 snd_pcm,snd_seq
sparse_keymap          13890  1 hp_wmi
gpio_ich               13526  0
hp_accel               26012  0
snd_seq_device         14497  3 snd_seq_midi,snd_rawmidi,snd_seq
ir_lirc_codec          13021  0
lirc_dev               20018  1 ir_lirc_codec
ir_sanyo_decoder       12839  0
ir_rc6_decoder         12874  0
ir_sony_decoder        12713  0
ir_rc5_decoder         12710  0
ir_nec_decoder         12915  0
ir_mce_kbd_decoder     13359  0
ir_jvc_decoder         12751  0
drm                   306660  5 radeon,ttm,drm_kms_helper
lis3lv02d              20280  1 hp_accel
psmouse               104093  0
jmb38x_ms              18947  0
rc_rc6_mce             12502  0
wmi                    19256  1 hp_wmi
input_polldev          13896  1 lis3lv02d
lpc_ich                21163  0
memstick               16811  1 jmb38x_ms
mac_hid                13253  0
serio_raw              13413  0
ene_ir                 29233  0
snd                    73753  21 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq_midi,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
bcma                   47094  1 b43
rc_core                27757  11 ir_lirc_codec,ir_sanyo_decoder,ir_rc6_decoder,ir_sony_decoder,ir_rc5_decoder,ir_nec_decoder,ir_mce_kbd_decoder,ir_jvc_decoder,rc_rc6_mce,ene_ir
i2c_algo_bit           13564  1 radeon
soundcore              12680  1 snd
video                  19574  0
snd_page_alloc         18798  2 snd_hda_intel,snd_pcm
lp                     17799  0
parport                42466  3 parport_pc,ppdev,lp
hid_generic            12548  0
usbhid                 53329  0
hid                   106315  2 hid_generic,usbhid
ahci                   30063  3
libahci                32118  1 ahci
firewire_ohci          45076  0
firewire_core          65168  1 firewire_ohci
crc_itu_t              12707  1 firewire_core
sdhci_pci              19146  0
sdhci                  43292  1 sdhci_pci
r8169                  73299  0
mii                    13981  1 r8169
ssb                    62919  1 b43




Kod Seç Genişlet



[    0.768659] usb usb3: Manufacturer: Linux 3.11.0-15-generic uhci_hcd
[    0.768661] usb usb3: SerialNumber: 0000:00:1a.0
[    0.768768] hub 3-0:1.0: USB hub found
[    0.768773] hub 3-0:1.0: 2 ports detected
[    0.769014] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.769019] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.769024] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.769064] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000080c0
[    0.769100] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.769103] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.769105] usb usb4: Product: UHCI Host Controller
[    0.769108] usb usb4: Manufacturer: Linux 3.11.0-15-generic uhci_hcd
[    0.769110] usb usb4: SerialNumber: 0000:00:1a.1
[    0.769224] hub 4-0:1.0: USB hub found
[    0.769229] hub 4-0:1.0: 2 ports detected
[    0.769479] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.769483] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.769489] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    0.769519] uhci_hcd 0000:00:1d.0: irq 20, io base 0x000080a0
[    0.769555] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.769558] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.769561] usb usb5: Product: UHCI Host Controller
[    0.769563] usb usb5: Manufacturer: Linux 3.11.0-15-generic uhci_hcd
[    0.769566] usb usb5: SerialNumber: 0000:00:1d.0
[    0.769668] hub 5-0:1.0: USB hub found
[    0.769673] hub 5-0:1.0: 2 ports detected
[    0.769916] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.769920] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.769926] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    0.769953] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00008080
[    0.769990] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    0.769993] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.769996] usb usb6: Product: UHCI Host Controller
[    0.769998] usb usb6: Manufacturer: Linux 3.11.0-15-generic uhci_hcd
[    0.770001] usb usb6: SerialNumber: 0000:00:1d.1
[    0.770101] hub 6-0:1.0: USB hub found
[    0.770106] hub 6-0:1.0: 2 ports detected
[    0.770345] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.770349] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.770356] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    0.770383] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00008060
[    0.770420] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    0.770423] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.770426] usb usb7: Product: UHCI Host Controller
[    0.770428] usb usb7: Manufacturer: Linux 3.11.0-15-generic uhci_hcd
[    0.770431] usb usb7: SerialNumber: 0000:00:1d.2
[    0.770531] hub 7-0:1.0: USB hub found
[    0.770535] hub 7-0:1.0: 2 ports detected
[    0.770777] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.770781] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.770787] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[    0.770828] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00008040
[    0.770865] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    0.770868] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.770870] usb usb8: Product: UHCI Host Controller
[    0.770873] usb usb8: Manufacturer: Linux 3.11.0-15-generic uhci_hcd
[    0.770875] usb usb8: SerialNumber: 0000:00:1d.3
[    0.770979] hub 8-0:1.0: USB hub found
[    0.770984] hub 8-0:1.0: 2 ports detected
[    0.771143] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[    0.796042] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.796050] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.796191] mousedev: PS/2 mouse device common for all mice
[    0.797436] rtc_cmos 00:03: RTC can wake from S4
[    0.797582] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.797612] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.797691] device-mapper: uevent: version 1.0.3
[    0.797760] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[    0.797871] cpuidle: using governor ladder
[    0.797931] cpuidle: using governor menu
[    0.797947] ledtrig-cpu: registered to indicate activity on CPUs
[    0.798043] TCP: cubic registered
[    0.798156] NET: Registered protocol family 10
[    0.798379] NET: Registered protocol family 17
[    0.798390] Key type dns_resolver registered
[    0.798656] PM: Hibernation image not present or could not be loaded.
[    0.798661] Loading module verification certificates
[    0.799830] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: e20ade5b3af83aaa8563f0ef4119a030c4d3ffdb'
[    0.799846] registered taskstats version 1
[    0.802461] Key type trusted registered
[    0.804782] Key type encrypted registered
[    0.807057] AppArmor: AppArmor sha1 policy hashing enabled
[    0.807900]   Magic number: 10:831:379
[    0.808043] rtc_cmos 00:03: setting system clock to 2014-04-10 12:21:21 UTC (1397132481)
[    0.808409] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.808411] EDD information not available.
[    0.810544] Freeing unused kernel memory: 1392K (ffffffff81d0f000 - ffffffff81e6b000)
[    0.810550] Write protecting the kernel read-only data: 12288k
[    0.813081] Freeing unused kernel memory: 672K (ffff880001758000 - ffff880001800000)
[    0.813225] Freeing unused kernel memory: 20K (ffff880001bfb000 - ffff880001c00000)
[    0.822629] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    0.838868] udevd[104]: starting version 175
[    0.914215] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.914495] r8169 0000:03:00.0: irq 46 for MSI/MSI-X
[    0.914692] r8169 0000:03:00.0 eth0: RTL8168c/8111c at 0xffffc9000062e000, 00:00:00:00:00:00, XID 1c4000c0 IRQ 46
[    0.914696] r8169 0000:03:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[    0.921158] sdhci: Secure Digital Host Controller Interface driver
[    0.921162] sdhci: Copyright(c) Pierre Ossman
[    0.924749] sdhci-pci 0000:06:00.1: SDHCI controller found [197b:2382] (rev 0)
[    0.924897] mmc0: no vqmmc regulator found
[    0.924900] mmc0: no vmmc regulator found
[    0.925000] mmc0: SDHCI controller on PCI [0000:06:00.1] using DMA
[    0.925189] sdhci-pci 0000:06:00.2: SDHCI controller found [197b:2381] (rev 0)
[    0.925275] sdhci-pci 0000:06:00.2: Refusing to bind to secondary interface.
[    0.936473] ssb: Found chip with id 0x4312, rev 0x01 and package 0x00
[    0.936493] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x16, vendor 0x4243)
[    0.936509] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0F, vendor 0x4243)
[    0.936522] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x0A, vendor 0x4243)
[    0.936539] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x09, vendor 0x4243)
[    0.995649] ahci 0000:00:1f.2: version 3.0
[    0.995910] ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
[    0.995968] ahci: SSS flag set, parallel bus scan disabled
[    0.996026] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    0.996031] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
[    0.996037] ahci 0000:00:1f.2: setting latency timer to 64
[    1.008314] ssb: Sonics Silicon Backplane found on PCI device 0000:02:00.0
[    1.020772] scsi0 : ahci
[    1.020887] scsi1 : ahci
[    1.020979] scsi2 : ahci
[    1.021064] scsi3 : ahci
[    1.021142] scsi4 : ahci
[    1.021220] scsi5 : ahci
[    1.021307] ata1: SATA max UDMA/133 abar m2048@0xda105000 port 0xda105100 irq 47
[    1.021310] ata2: SATA max UDMA/133 abar m2048@0xda105000 port 0xda105180 irq 47
[    1.021312] ata3: DUMMY
[    1.021314] ata4: DUMMY
[    1.021317] ata5: SATA max UDMA/133 abar m2048@0xda105000 port 0xda105300 irq 47
[    1.021320] ata6: SATA max UDMA/133 abar m2048@0xda105000 port 0xda105380 irq 47
[    1.048089] firewire_ohci 0000:06:00.0: added OHCI v1.10 device as card 0, 4 IR + 0 IT contexts, quirks 0x10
[    1.324044] usb 2-4: new high-speed USB device number 2 using ehci-pci
[    1.488213] usb 2-4: New USB device found, idVendor=0408, idProduct=03f1
[    1.488217] usb 2-4: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    1.488220] usb 2-4: Product: HP Webcam
[    1.488222] usb 2-4: Manufacturer: Sonix Technology Co., Ltd.
[    1.512042] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.522875] ata1.00: ATA-8: ST9320325AS, P003HPM1, max UDMA/100
[    1.522878] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.546680] ata1.00: configured for UDMA/100
[    1.546845] scsi 0:0:0:0: Direct-Access     ATA      ST9320325AS      P003 PQ: 0 ANSI: 5
[    1.547071] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.547109] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.547161] sd 0:0:0:0: [sda] Write Protect is off
[    1.547165] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.547188] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.548166] firewire_core 0000:06:00.0: created device fw0: GUID 0000000000000000, S400
[    1.580506]  sda: sda1 sda2 sda3 sda4 < sda5 >
[    1.581109] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.988032] usb 4-2: new full-speed USB device number 2 using uhci_hcd
[    2.036051] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.052678] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633M, 0200, max UDMA/100
[    2.068730] ata2.00: configured for UDMA/100
[    2.071429] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-L633M  0200 PQ: 0 ANSI: 5
[    2.078517] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.078520] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.078678] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.078770] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.167116] usb 4-2: New USB device found, idVendor=046d, idProduct=c52f
[    2.167120] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.167122] usb 4-2: Product: USB Receiver
[    2.167125] usb 4-2: Manufacturer: Logitech
[    2.177600] hidraw: raw HID events driver (C) Jiri Kosina
[    2.184178] usbcore: registered new interface driver usbhid
[    2.184182] usbhid: USB HID core driver
[    2.187916] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input5
[    2.188108] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.1-2/input0
[    2.191240] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.1/input/input6
[    2.191458] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.1-2/input1
[    2.400053] ata5: SATA link down (SStatus 0 SControl 300)
[    2.416043] usb 7-2: new full-speed USB device number 2 using uhci_hcd
[    2.588441] usb 7-2: New USB device found, idVendor=03f0, idProduct=171d
[    2.588444] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.588447] usb 7-2: Product: HP Integrated Module
[    2.588449] usb 7-2: Manufacturer: Broadcom Corp
[    2.720053] ata6: SATA link down (SStatus 0 SControl 300)
[    3.624685] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    5.755167] init: ureadahead main process (311) terminated with status 5
[    7.077046] Adding 4192252k swap on /dev/sda5.  Priority:-1 extents:1 across:4192252k FS
[    7.967182] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    8.299632] udevd[387]: starting version 175
[    9.041122] lp: driver loaded but no devices found
[    9.168084] ACPI Error: [_T_0] Namespace lookup failure, AE_ALREADY_EXISTS (20130517/dswload2-330)
[    9.168093] ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20130517/psobject-222)
[    9.168097] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEGP.VGA_.LCD_.GBQC] (Node ffff8800bae513c0), AE_ALREADY_EXISTS (20130517/psparse-536)
[    9.168108] ACPI: Marking method GBQC as Serialized because of AE_ALREADY_EXISTS error
[    9.168112] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEGP.VGA_.LCD_._BQC] (Node ffff8800bae51398), AE_ALREADY_EXISTS (20130517/psparse-536)
[    9.168680] ACPI: Marking method _BQC as Serialized because of AE_ALREADY_EXISTS error
[    9.168692] ACPI Warning: Evaluating _BQC failed (20130517/video-566)
[    9.177607] acpi device:08: registered as cooling_device2
[    9.179231] ACPI Error: [_T_0] Namespace lookup failure, AE_ALREADY_EXISTS (20130517/dswload2-330)
[    9.179243] ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20130517/psobject-222)
[    9.179246] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEGP.VGA_.LCD1.GBQC] (Node ffff8800bae51618), AE_ALREADY_EXISTS (20130517/psparse-536)
[    9.179258] ACPI: Marking method GBQC as Serialized because of AE_ALREADY_EXISTS error
[    9.179262] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEGP.VGA_.LCD1._BQC] (Node ffff8800bae515f0), AE_ALREADY_EXISTS (20130517/psparse-536)
[    9.179269] ACPI: Marking method _BQC as Serialized because of AE_ALREADY_EXISTS error
[    9.179276] ACPI Warning: Evaluating _BQC failed (20130517/video-566)
[    9.183177] acpi device:0a: registered as cooling_device3
[    9.183214] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    9.183275] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/LNXVIDEO:01/input/input7
[    9.295001] ene_ir: chip is 0x3926 - kbver = 0x00, rev = 0xc0
[    9.295006] ene_ir: PLL freq = 1406
[    9.295007] ene_ir: KB3926C detected
[    9.295020] ene_ir: Firmware regs: c0 00
[    9.295022] ene_ir: Hardware features:
[    9.295023] ene_ir: * Uses GPIO 40 for IR demodulated input
[    9.328177] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMBA 1 (20130517/utaddress-251)
[    9.328186] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.328191] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
[    9.328196] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.328234] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    9.430198] wmi: Mapper loaded
[    9.488043] Registered IR keymap rc-rc6-mce
[    9.488202] input: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0/input8
[    9.488324] rc0: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0
[    9.497053] ene_ir: driver has been successfully loaded
[    9.589615] IR JVC protocol handler initialized
[    9.592982] input: MCE IR Keyboard/Mouse (ene_ir) as /devices/virtual/input/input9
[    9.595782] [drm] Initialized drm 1.1.0 20060810
[    9.597815] lirc_dev: IR Remote Control driver registered, major 248
[    9.598017] IR MCE Keyboard/mouse protocol handler initialized
[    9.598182] IR NEC protocol handler initialized
[    9.598191] IR RC5(x) protocol handler initialized
[    9.598307] IR Sony protocol handler initialized
[    9.598319] IR RC6 protocol handler initialized
[    9.598464] IR SANYO protocol handler initialized
[    9.605098] rc rc0: lirc_dev: driver ir-lirc-codec (ene_ir) registered at minor = 0
[    9.605103] IR LIRC bridge handler initialized
[    9.642329] hp_accel: laptop model unknown, using default axes configuration
[    9.658120] lis3lv02d: 8 bits sensor found
[    9.738200] gpio_ich: GPIO from 179 to 239 on gpio_ich
[    9.828189] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input10
[    9.849615] Bluetooth: Core ver 2.16
[    9.849817] NET: Registered protocol family 31
[    9.849820] Bluetooth: HCI device and connection manager initialized
[    9.849833] Bluetooth: HCI socket layer initialized
[    9.849836] Bluetooth: L2CAP socket layer initialized
[    9.849844] Bluetooth: SCO socket layer initialized
[    9.862162] input: HP WMI hotkeys as /devices/virtual/input/input11
[   10.106996] usbcore: registered new interface driver btusb
[   10.165470] Linux video capture interface: v2.00
[   10.211377] cfg80211: Calling CRDA to update world regulatory domain
[   10.439471] uvcvideo: Found UVC 1.00 device HP Webcam (0408:03f1)
[   10.487758] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input12
[   10.487884] usbcore: registered new interface driver uvcvideo
[   10.487887] USB Video Class driver (1.1.1)
[   10.544393] [drm] radeon kernel modesetting enabled.
[   10.545015] [drm] initializing kernel modesetting (RV710 0x1002:0x9553 0x103C:0x3628).
[   10.545044] [drm] register mmio base: 0xDA000000
[   10.545046] [drm] register mmio size: 65536
[   10.545148] ATOM BIOS: HP_CUJO_JONES_M92M_DDR3
[   10.545187] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[   10.545190] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[   10.545193] [drm] Detected VRAM RAM=512M, BAR=256M
[   10.545194] [drm] RAM width 64bits DDR
[   10.545259] [TTM] Zone  kernel: Available graphics memory: 1539368 kiB
[   10.545261] [TTM] Initializing pool allocator
[   10.545266] [TTM] Initializing DMA pool allocator
[   10.545288] [drm] radeon: 512M of VRAM memory ready
[   10.545290] [drm] radeon: 512M of GTT memory ready.
[   10.604155] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04751/0xa00000/0x0, board id: 3655, fw id: 428212
[   10.692603] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input13
[   10.734760] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[   10.770660] [drm] GART: num cpu pages 131072, num gpu pages 131072
[   10.776678] [drm] Loading RV710 Microcode
[   10.815471] mute LED gpio 8 polarity 1
[   10.815695] autoconfig: line_outs=1 (0xf/0x0/0x0/0x0/0x0) type:line
[   10.815697]    speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
[   10.815699]    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   10.815700]    mono: mono_out=0x0
[   10.815702]    dig-out=0x1e/0x0
[   10.815703]    inputs:
[   10.815705]      Internal Mic=0x18
[   10.815707]      Mic=0xb
[   10.844464] input: HDA Intel Front Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   10.844670] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   10.902450] b43-phy0: Broadcom 4312 WLAN found (core revision 15)
[   10.911483] [drm] PCIE GART of 512M enabled (table at 0x000000000025D000).
[   10.911574] radeon 0000:01:00.0: WB enabled
[   10.911579] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8800b75c2c00
[   10.911582] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8800b75c2c0c
[   10.912592] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c598 and cpu addr 0xffffc90004d9c598
[   10.912597] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   10.912599] [drm] Driver supports precise vblank timestamp query.
[   10.912630] radeon 0000:01:00.0: irq 49 for MSI/MSI-X
[   10.912648] radeon 0000:01:00.0: radeon: using MSI.
[   10.912681] [drm] radeon: irq initialized.
[   10.944236] b43-phy0: Found PHY: Analog 6, Type 5 (LP), Revision 1
[   10.958802] [drm] ring test on 0 succeeded in 1 usecs
[   10.958862] [drm] ring test on 3 succeeded in 1 usecs
[   10.969084] Broadcom 43xx driver loaded [ Features: PNL ]
[   11.133184] b43-phy0 ERROR: Firmware file "b43/ucode15.fw" not found
[   11.133192] b43-phy0 ERROR: Firmware file "b43-open/ucode15.fw" not found
[   11.133196] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[   11.197839] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[   11.429587] type=1400 audit(1397121692.116:2): apparmor="STATUS" operation="profile_load" parent=690 profile="unconfined" name="/sbin/dhclient" pid=691 comm="apparmor_parser"
[   11.429597] type=1400 audit(1397121692.116:3): apparmor="STATUS" operation="profile_load" parent=690 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=691 comm="apparmor_parser"
[   11.429603] type=1400 audit(1397121692.116:4): apparmor="STATUS" operation="profile_load" parent=690 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=691 comm="apparmor_parser"
[   11.430218] type=1400 audit(1397121692.116:5): apparmor="STATUS" operation="profile_replace" parent=690 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=691 comm="apparmor_parser"
[   11.430227] type=1400 audit(1397121692.116:6): apparmor="STATUS" operation="profile_replace" parent=690 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=691 comm="apparmor_parser"
[   11.430544] type=1400 audit(1397121692.116:7): apparmor="STATUS" operation="profile_replace" parent=690 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=691 comm="apparmor_parser"
[   11.431511] type=1400 audit(1397121692.116:8): apparmor="STATUS" operation="profile_replace" parent=597 profile="unconfined" name="/sbin/dhclient" pid=650 comm="apparmor_parser"
[   11.431521] type=1400 audit(1397121692.116:9): apparmor="STATUS" operation="profile_replace" parent=597 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=650 comm="apparmor_parser"
[   11.431527] type=1400 audit(1397121692.116:10): apparmor="STATUS" operation="profile_replace" parent=597 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=650 comm="apparmor_parser"
[   11.432165] type=1400 audit(1397121692.120:11): apparmor="STATUS" operation="profile_replace" parent=597 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=650 comm="apparmor_parser"
[   12.137576] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!!
[   12.621330] init: failsafe main process (770) killed by TERM signal
[   13.149724] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!!
[   13.313260] ppdev: user-space parallel port driver
[   14.038644] Bluetooth: RFCOMM TTY layer initialized
[   14.038661] Bluetooth: RFCOMM socket layer initialized
[   14.038663] Bluetooth: RFCOMM ver 1.11
[   14.161875] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!!
[   14.217777] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   14.217782] Bluetooth: BNEP filters: protocol multicast
[   14.217792] Bluetooth: BNEP socket layer initialized
[   15.174033] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!!
[   15.961802] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.186164] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!!
[   17.198292] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!!
[   18.210404] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!!
[   19.222510] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!!
[   20.234617] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!!
[   21.246722] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!!
[   21.266575] [drm:r600_uvd_init] *ERROR* UVD not responding, giving up!!!
[   21.266583] [drm:rv770_startup] *ERROR* radeon: failed initializing UVD (-1).
[   21.266774] [drm] ib test on ring 0 succeeded in 0 usecs
[   21.266796] [drm] ib test on ring 3 succeeded in 0 usecs
[   21.274487] audit_printk_skb: 96 callbacks suppressed
[   21.274493] type=1400 audit(1397121701.960:44): apparmor="STATUS" operation="profile_replace" parent=896 profile="unconfined" name="launchpad_integration" pid=903 comm="apparmor_parser"
[   21.274502] type=1400 audit(1397121701.960:45): apparmor="STATUS" operation="profile_replace" parent=896 profile="unconfined" name="sanitized_helper" pid=903 comm="apparmor_parser"
[   21.274508] type=1400 audit(1397121701.960:46): apparmor="STATUS" operation="profile_replace" parent=896 profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=903 comm="apparmor_parser"
[   21.284129] type=1400 audit(1397121701.972:47): apparmor="STATUS" operation="profile_replace" parent=896 profile="unconfined" name="sanitized_helper" pid=903 comm="apparmor_parser"
[   21.288209] [drm] radeon atom DIG backlight initialized
[   21.288217] [drm] Radeon Display Connectors
[   21.288218] [drm] Connector 0:
[   21.288221] [drm]   LVDS-1
[   21.288223] [drm]   Encoders:
[   21.288224] [drm]     LCD1: INTERNAL_UNIPHY2
[   21.288226] [drm] Connector 1:
[   21.288228] [drm]   VGA-1
[   21.288230] [drm]   DDC: 0x7fa0 0x7fa0 0x7fa4 0x7fa4 0x7fa8 0x7fa8 0x7fac 0x7fac
[   21.288232] [drm]   Encoders:
[   21.288233] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   21.288235] [drm] Connector 2:
[   21.288236] [drm]   HDMI-A-1
[   21.288238] [drm]   HPD1
[   21.288240] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[   21.288241] [drm]   Encoders:
[   21.288243] [drm]     DFP1: INTERNAL_UNIPHY
[   21.288298] [drm] radeon: power management initialized
[   21.288808] type=1400 audit(1397121701.976:48): apparmor="STATUS" operation="profile_replace" parent=896 profile="unconfined" name="sanitized_helper" pid=903 comm="apparmor_parser"
[   21.288821] type=1400 audit(1397121701.976:49): apparmor="STATUS" operation="profile_replace" parent=896 profile="unconfined" name="/usr/bin/evince-previewer" pid=903 comm="apparmor_parser"
[   21.300096] type=1400 audit(1397121701.988:50): apparmor="STATUS" operation="profile_replace" parent=896 profile="unconfined" name="launchpad_integration" pid=903 comm="apparmor_parser"
[   21.300103] type=1400 audit(1397121701.988:51): apparmor="STATUS" operation="profile_replace" parent=896 profile="unconfined" name="sanitized_helper" pid=903 comm="apparmor_parser"
[   21.300110] type=1400 audit(1397121701.988:52): apparmor="STATUS" operation="profile_replace" parent=896 profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=903 comm="apparmor_parser"
[   21.316089] type=1400 audit(1397121702.004:53): apparmor="STATUS" operation="profile_replace" parent=896 profile="unconfined" name="sanitized_helper" pid=903 comm="apparmor_parser"
[   22.251824] [drm] fb mappable at 0xC035F000
[   22.251829] [drm] vram apper at 0xC0000000
[   22.251830] [drm] size 4325376
[   22.251832] [drm] fb depth is 24
[   22.251833] [drm]    pitch is 5632
[   22.251938] fbcon: radeondrmfb (fb0) is primary device
[   22.508184] Console: switching to colour frame buffer device 170x48
[   22.511033] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[   22.511036] radeon 0000:01:00.0: registered panic notifier
[   22.511053] [drm] Initialized radeon 2.34.0 20080528 for 0000:01:00.0 on minor 0
[   22.511207] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[   22.511212] hda-intel 0000:01:00.1: Using LPIB position fix
[   22.511277] snd_hda_intel 0000:01:00.1: irq 50 for MSI/MSI-X
[   22.515615] hda-intel 0000:01:00.1: Enable sync_write for stable communication
[   22.566846] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[   59.504508] audit_printk_skb: 45 callbacks suppressed
[   59.504514] type=1400 audit(1397121740.192:69): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/gvfs/remote-volume-monitors/" pid=1932 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[  277.606968] Program lshw tried to access /dev/mem between ff000->101000.
[  402.943557] Program lshw tried to access /dev/mem between ff000->101000.
[  733.941613] Program lshw tried to access /dev/mem between ff000->101000.



Kod Seç Genişlet



[   22.511277] snd_hda_intel 0000:01:00.1: irq 50 for MSI/MSI-X
[   22.515615] hda-intel 0000:01:00.1: Enable sync_write for stable communication
[   22.566846] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[   59.504508] audit_printk_skb: 45 callbacks suppressed
[   59.504514] type=1400 audit(1397121740.192:69): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/gvfs/remote-volume-monitors/" pid=1932 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[  277.606968] Program lshw tried to access /dev/mem between ff000->101000.
[  402.943557] Program lshw tried to access /dev/mem between ff000->101000.
[  733.941613] Program lshw tried to access /dev/mem between ff000->101000.
[  892.896410] type=1400 audit(1397122573.584:70): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=909 comm="cupsd" pid=909 comm="cupsd" capability=36  capname="block_suspend"
[  919.041618] perf samples too long (2522 > 2500), lowering kernel.perf_event_max_sample_rate to 50000









[plazma]

http://askubuntu.com/questions/80402/broadcom-bcm4312-not-working

adresini bir inceleyin.

[siberoloji]

Bilgisayarınızı kablo ile modeme bağlayıp net bağlantısı kurup güncelleme yapmalı ve b43 sürücü yüklemelisiniz. Kablo ile bağlanıp
sudo apt-get update && sudo apt-get upgrade
Komutu sonrasında
sudo apt-get install b43-fwcutter
Komutu verin. Sanırım işe yarar.

[lsdc]

Maalesef kablo ile de bağlanamıyorum internete.

[heartsmagic]

Önce şu komutu yürüt:

Kod Seç Genişlet

sudo apt-get remove --purge bcmwl-kernel-source

Ardından:

http://nl.archive.ubuntu.com/ubuntu/pool/main/b/b43-fwcutter/b43-fwcutter_015-9_amd64.deb
http://nl.archive.ubuntu.com/ubuntu/pool/multiverse/b/b43-fwcutter/firmware-b43-lpphy-installer_015-9_all.deb

dosyalarını indir ve masaüstüne koy. Sonra uçbirimi aç, şu komutları yürüt:

Kod Seç Genişlet

cd ~/Masaüstü
sudo dpkg -i *.deb

Sonra sistemi yeniden başlatıp duruma bak. Fakat, lütfen uyguladığın komutları ve çıktılarını bir yere kaydet ve sonuçlarını buraya aktar.

[lsdc]

Hala kablolu/kablosuz erişim yok. Settings->Edit connections->wired kısmında adaptörün fiziksel adresinin yazması gerekemez mi? Bende hiçbir şey yazmıyor. Daha doğrusu 00:00:00:00:00:00 (eth0).

Kod Seç Genişlet


Reading package lists... Done
Building dependency tree       
Reading state information... Done
E: Unable to locate package bcmwl-kernel-source


Kod Seç Genişlet


Selecting previously unselected package b43-fwcutter.
(Reading database ... 143882 files and directories currently installed.)
Unpacking b43-fwcutter (from b43-fwcutter_015-9_amd64.deb) ...
Selecting previously unselected package firmware-b43-lpphy-installer.
Unpacking firmware-b43-lpphy-installer (from firmware-b43-lpphy-installer_015-9_all.deb) ...
Setting up b43-fwcutter (1:015-9) ...
Processing triggers for man-db ...
Setting up firmware-b43-lpphy-installer (1:015-9) ...
No chroot environment found. Starting normal installation
--2014-04-11 01:10:58--  http://downloads.openwrt.org/sources/broadcom-wl-4.178.10.4.tar.bz2
Resolving downloads.openwrt.org (downloads.openwrt.org)... failed: Name or service not known.
wget: unable to resolve host address `downloads.openwrt.org'
dpkg: error processing firmware-b43-lpphy-installer (--install):
subprocess installed post-installation script returned error exit status 4
Errors were encountered while processing:
firmware-b43-lpphy-installer


[heartsmagic]

Peki sadece şunu dener misin:

Kod Seç Genişlet

cd ~/Masaüstü
sudo dpkg -i b43-fwcutter_015-9_amd64.deb

Bu işi çözmenin en kolay yolu mümkünse kablo ile ya da telefon aracılığıyla internet edinmek. Şu şekilde biraz uğraştıracak ne yazık ki bu sorun.

[lsdc]

Sonuç aynı.

Kod Seç Genişlet


(Reading database ... 143894 files and directories currently installed.)
Preparing to replace b43-fwcutter 1:015-9 (using b43-fwcutter_015-9_amd64.deb) ...
Unpacking replacement b43-fwcutter ...
Setting up b43-fwcutter (1:015-9) ...
Processing triggers for man-db ...


[heartsmagic]

Paket kurulmuş, sonuç aynı derken kablosuz ağı hâlâ mı görmüyor. Sistem yeniden başlatıldı mı?

[lsdc]

Evet. Ne kablolu ağı ne de kablosuz ağı görüyor.

Interfaces dosyasında yazan:

Kod Seç Genişlet


auto lo
iface lo inet loopback



NetworkManager dosyasında yazan:

Kod Seç Genişlet


[main]
plugins=ifupdown,keyfile
dns=dnsmasq

no-auto-default=00:00:00:00:00:00,

[ifupdown]
managed=false



Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 12 Nisan 2014 - 12:30:41
Kablolu bağdaştırıcı fiziksel adresi 00:00:00:00:00:00 gözüküyor. Windows a kullanırken de kablosuz bağlanabiliyordum ama kablolu bağlanamıyordum. Aygıt yöneticisinden kablolu bağdaştırcının adresini elle girince düzelmişti kablolu bağlantı. Alttaki çıktıları yorumlayabilecek yoksa en azından ubuntuda fiziksel adresi elle nasıl girebileceğimi söyleseniz bari?

if config:

Kod Seç Genişlet


lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:216 errors:0 dropped:0 overruns:0 frame:0
          TX packets:216 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:14704 (14.7 KB)  TX bytes:14704 (14.7 KB)


ifconfig -a:

Kod Seç Genişlet


eth0      Link encap:Ethernet  HWaddr 00:00:00:00:00:00 
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:216 errors:0 dropped:0 overruns:0 frame:0
          TX packets:216 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:14704 (14.7 KB)  TX bytes:14704 (14.7 KB)


iwconfig:

Kod Seç Genişlet


eth0      no wireless extensions.

lo        no wireless extensions.



[if]

https://forum.ubuntu-tr.net/index.php?topic=43102.msg505018#msg505018