Kablosuz internete bağlanamıyorum - Cinnamon 13

[unheil]

Merhaba arkadaşlar lütfen bana yardımcı olun. Linux'da yeniyim ve Linux Mint 13 Cinnamon 32bit yükledim. Sorunsuz kurulum yaptım ve MAXTOR harddiskime kurdum. (160gb) Ancak internete bağlanamadım bir türlü WPA/WPA2 şifreli ağıma bağlantı yapamadım önce ndiswrapper ile .inf xp driver'ı olan Airties Air 2315 usb ağ aygıtımı yükledim driver kurulu gözüküyor ve usb lere baktığımda komutla Ağ sağlayıcım gözüküyor ancak forumumuzdan baktığımda konuda yazan komutların bazılarını yapamıyorum örneğin wlan0 diye bir şey yok diyor ve rfkill diye bir şey yok sanırım bilgisayarımda bunları internet olmadan nasıl kurabilirim?
İkinci bir nokta tar gz li dosyaları bulup usb diskimle bilgisayara atıyorum ancak nasıl kuracağımı bilmiyorum bunları nasıl kurarım? Ndiswrapper'ın da kurulu olduğunu sanmıyorum bir problem var. Komut yazdığım yerde çalışıyor ndiswrapper ancak program olarak göremiyorum yüklülerde. Yardımlarınız için sağolun şuan win7 işletim sistemimdeyim.
Tekrar etmek istiyorum kablolu bağlantım yok ve masaüstü kablolu bir yer bulamam bu yüzden kablosuza bağlanmam gerek tüm update'ler için.


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 16 Şubat 2014 - 13:58:33
Bir de arkadaşlar iki farklı hdd olduğundan normal açılışta sadece windows7 açılıyor yalnız kablolarını söküp yeniden başlatıp diğer harddiske geçebiliyorum bunun bir çaresi var mı? 

[guopx]

http://forum.ubuntu-tr.net/index.php?topic=28764.0 Buradaki komutların çıktılarını verebilir misiniz?

[unheil]

Gecikme için özür dilerim
Buyrun bu şekilde:

cat /etc/lsb-release

Kod Seç Genişlet

DISTRIB_ID=LinuxMint
DISTRIB_RELEASE=13
DISTRIB_CODENAME=maya
DISTRIB_DESCRIPTION="Linux Mint 13 Maya"

___

uname -a

Kod Seç Genişlet

Linux KAAN 3.2.0-23-generic #36-Ubuntu SMP Tue Apr 10 20:41:14 UTC 2012 i686 i686 i386 GNU/Linux

___


lspci

Kod Seç Genişlet


00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 01)
00:1d.0 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 01)
00:1d.1 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01)
00:1d.2 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01)
00:1d.3 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01)
00:1d.7 USB controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.2 IDE interface: Intel Corporation N10/ICH7 Family SATA Controller [IDE mode] (rev 01)
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01)
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV730 PRO [Radeon HD 4650]
01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI RV710/730 HDMI Audio [Radeon HD 4000 series]
02:05.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13)

___

lsusb

Kod Seç Genişlet

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0781:5567 SanDisk Corp. Cruzer Blade
Bus 001 Device 003: ID 1eda:2315 AirTies Wireless Networks
Bus 005 Device 002: ID 0ac8:303b Z-Star Microelectronics Corp. ZC0303 Webcam
Bus 005 Device 003: ID 15d9:0a4f Trust International B.V.

__

rfkill list
hiçbir şey çıkmıyor

___



sudo lshw -C network

Kod Seç Genişlet

PCI (sysfs) 

___



ifconfig

Kod Seç Genişlet

eth0      Link encap:Ethernet  HWaddr 00:16:e6:6e:5b:c4 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:21

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:24 errors:0 dropped:0 overruns:0 frame:0
          TX packets:24 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:1680 (1.6 KB)  TX bytes:1680 (1.6 KB)

__
iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.


__

iwlist scanning

Kod Seç Genişlet


lo        Interface doesn't support scanning.

eth0      Interface doesn't support scanning.


___
lsmod

Kod Seç Genişlet

Module                  Size  Used by
nls_iso8859_1          12617  1
nls_cp437              12751  1
vfat                   17308  1
fat                    55605  1 vfat
rfcomm                 38139  0
snd_seq_midi           13132  0
bnep                   17830  2
ppdev                  12849  0
bluetooth             158438  10 rfcomm,bnep
snd_rawmidi            25424  1 snd_seq_midi
gspca_zc3xx            51066  0
gspca_main             27654  1 gspca_zc3xx
snd_hda_codec_hdmi     31775  1
radeon                729591  3
videodev               86588  1 gspca_main
parport_pc             32114  1
snd_seq_midi_event     14475  1 snd_seq_midi
snd_hda_codec_realtek   174055  1
binfmt_misc            17292  1
snd_hda_intel          32765  5
snd_hda_codec         109562  3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep              13276  1 snd_hda_codec
usbhid                 41906  0
hid                    77367  1 usbhid
snd_seq                51567  2 snd_seq_midi,snd_seq_midi_event
ttm                    65344  1 radeon
snd_pcm                80845  3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
drm_kms_helper         45466  1 radeon
drm                   197692  5 radeon,ttm,drm_kms_helper
snd_seq_device         14172  3 snd_seq_midi,snd_rawmidi,snd_seq
mac_hid                13077  0
snd_timer              28931  2 snd_seq,snd_pcm
i2c_algo_bit           13199  1 radeon
snd                    62064  20 snd_rawmidi,snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_seq,snd_pcm,snd_seq_device,snd_timer
soundcore              14635  1 snd
snd_page_alloc         14115  2 snd_hda_intel,snd_pcm
lp                     17455  0
parport                40930  3 ppdev,parport_pc,lp
usb_storage            39646  1
skge                   44767  0
floppy                 60310  0


___
dmesg

Kod Seç Genişlet

)
[    0.230720] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.230810] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.230901] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.230990] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.231083] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.231286] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.231293] vgaarb: loaded
[    0.231296] vgaarb: bridge control possible 0000:01:00.0
[    0.231504] i2c-core: driver [aat2870] using legacy suspend method
[    0.231507] i2c-core: driver [aat2870] using legacy resume method
[    0.231649] SCSI subsystem initialized
[    0.231736] libata version 3.00 loaded.
[    0.231823] usbcore: registered new interface driver usbfs
[    0.231845] usbcore: registered new interface driver hub
[    0.231895] usbcore: registered new device driver usb
[    0.232081] PCI: Using ACPI for IRQ routing
[    0.234055] PCI: pci_cache_line_size set to 64 bytes
[    0.234143] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[    0.234147] reserve RAM buffer: 00000000bfff0000 - 00000000bfffffff
[    0.234309] NetLabel: Initializing
[    0.234312] NetLabel:  domain hash size = 128
[    0.234315] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.234332] NetLabel:  unlabeled traffic allowed by default
[    0.240600] hpet clockevent registered
[    0.240606] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.240613] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.240621] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.248354] Switching to clocksource hpet
[    0.261232] AppArmor: AppArmor Filesystem Enabled
[    0.261281] pnp: PnP ACPI init
[    0.261312] ACPI: bus type pnp registered
[    0.261467] pnp 00:00: [bus 00-3f]
[    0.261472] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.261476] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.261480] pnp 00:00: [io  0x0d00-0xffff window]
[    0.261484] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.261488] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[    0.261492] pnp 00:00: [mem 0xc0000000-0xfebfffff window]
[    0.261576] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.261683] pnp 00:01: [io  0x0010-0x001f]
[    0.261687] pnp 00:01: [io  0x0022-0x003f]
[    0.261690] pnp 00:01: [io  0x0044-0x005f]
[    0.261693] pnp 00:01: [io  0x0062-0x0063]
[    0.261696] pnp 00:01: [io  0x0065-0x006f]
[    0.261699] pnp 00:01: [io  0x0074-0x007f]
[    0.261703] pnp 00:01: [io  0x0091-0x0093]
[    0.261706] pnp 00:01: [io  0x00a2-0x00bf]
[    0.261709] pnp 00:01: [io  0x00e0-0x00ef]
[    0.261712] pnp 00:01: [io  0x04d0-0x04d1]
[    0.261715] pnp 00:01: [io  0x0290-0x029f]
[    0.261718] pnp 00:01: [io  0x0800-0x087f]
[    0.261721] pnp 00:01: [io  0x0290-0x0294]
[    0.261724] pnp 00:01: [io  0x0880-0x088f]
[    0.261814] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.261819] system 00:01: [io  0x0290-0x029f] has been reserved
[    0.261823] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.261827] system 00:01: [io  0x0290-0x0294] has been reserved
[    0.261832] system 00:01: [io  0x0880-0x088f] has been reserved
[    0.261837] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.261860] pnp 00:02: [dma 4]
[    0.261864] pnp 00:02: [io  0x0000-0x000f]
[    0.261867] pnp 00:02: [io  0x0080-0x0090]
[    0.261870] pnp 00:02: [io  0x0094-0x009f]
[    0.261873] pnp 00:02: [io  0x00c0-0x00df]
[    0.261921] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.261943] pnp 00:03: [io  0x0070-0x0073]
[    0.261961] pnp 00:03: [irq 8]
[    0.262010] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.262027] pnp 00:04: [io  0x0061]
[    0.262079] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.262097] pnp 00:05: [io  0x00f0-0x00ff]
[    0.262105] pnp 00:05: [irq 13]
[    0.262159] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.262343] pnp 00:06: [io  0x03f0-0x03f5]
[    0.262347] pnp 00:06: [io  0x03f7]
[    0.262355] pnp 00:06: [irq 6]
[    0.262358] pnp 00:06: [dma 2]
[    0.262431] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.262678] pnp 00:07: [io  0x03f8-0x03ff]
[    0.262686] pnp 00:07: [irq 4]
[    0.262780] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.263043] pnp 00:08: [io  0x02f8-0x02ff]
[    0.263051] pnp 00:08: [irq 3]
[    0.263140] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.263421] pnp 00:09: [io  0x0378-0x037f]
[    0.263429] pnp 00:09: [irq 7]
[    0.263513] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.263660] pnp 00:0a: [io  0x0060]
[    0.263664] pnp 00:0a: [io  0x0064]
[    0.263672] pnp 00:0a: [irq 1]
[    0.263726] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.263783] pnp 00:0b: [io  0x0400-0x04bf]
[    0.263860] system 00:0b: [io  0x0400-0x04bf] has been reserved
[    0.263867] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.264224] pnp 00:0c: [mem 0xf0000000-0xf3ffffff]
[    0.264324] system 00:0c: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.264330] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.264539] pnp 00:0d: [mem 0x000f0000-0x000f3fff]
[    0.264544] pnp 00:0d: [mem 0x000f4000-0x000f7fff]
[    0.264547] pnp 00:0d: [mem 0x000f8000-0x000fbfff]
[    0.264551] pnp 00:0d: [mem 0x000fc000-0x000fffff]
[    0.264554] pnp 00:0d: [mem 0xbfff0000-0xbfffffff]
[    0.264558] pnp 00:0d: [mem 0x00000000-0x0009ffff]
[    0.264561] pnp 00:0d: [mem 0x00100000-0xbffeffff]
[    0.264565] pnp 00:0d: [mem 0xfec00000-0xfec00fff]
[    0.264568] pnp 00:0d: [mem 0xfed13000-0xfed1dfff]
[    0.264571] pnp 00:0d: [mem 0xfed20000-0xfed8ffff]
[    0.264575] pnp 00:0d: [mem 0xfee00000-0xfee00fff]
[    0.264578] pnp 00:0d: [mem 0xffb00000-0xffb7ffff]
[    0.264582] pnp 00:0d: [mem 0xfff00000-0xffffffff]
[    0.264585] pnp 00:0d: [mem 0x000e0000-0x000effff]
[    0.264689] system 00:0d: [mem 0x000f0000-0x000f3fff] could not be reserved
[    0.264694] system 00:0d: [mem 0x000f4000-0x000f7fff] could not be reserved
[    0.264698] system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.264702] system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.264707] system 00:0d: [mem 0xbfff0000-0xbfffffff] could not be reserved
[    0.264711] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.264716] system 00:0d: [mem 0x00100000-0xbffeffff] could not be reserved
[    0.264720] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.264725] system 00:0d: [mem 0xfed13000-0xfed1dfff] has been reserved
[    0.264729] system 00:0d: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.264733] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.264738] system 00:0d: [mem 0xffb00000-0xffb7ffff] has been reserved
[    0.264742] system 00:0d: [mem 0xfff00000-0xffffffff] has been reserved
[    0.264746] system 00:0d: [mem 0x000e0000-0x000effff] has been reserved
[    0.264751] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.264785] pnp 00:0e: [mem 0xffb80000-0xffbfffff]
[    0.264860] pnp 00:0e: Plug and Play ACPI device, IDs INT0800 (active)
[    0.264870] pnp: PnP ACPI: found 15 devices
[    0.264873] ACPI: ACPI bus type pnp unregistered
[    0.264880] PnPBIOS: Disabled by ACPI PNP
[    0.302882] PCI: max bus depth: 1 pci_try_num: 2
[    0.302916] pci 0000:00:1e.0: BAR 15: assigned [mem 0xc0000000-0xc00fffff pref]
[    0.302922] pci 0000:01:00.0: BAR 6: assigned [mem 0xe0000000-0xe001ffff pref]
[    0.302927] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.302932] pci 0000:00:1c.0:   bridge window [io  0x9000-0x9fff]
[    0.302939] pci 0000:00:1c.0:   bridge window [mem 0xe0000000-0xe1ffffff]
[    0.302946] pci 0000:00:1c.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.302956] pci 0000:02:05.0: BAR 6: assigned [mem 0xc0000000-0xc001ffff pref]
[    0.302960] pci 0000:00:1e.0: PCI bridge to [bus 02-02]
[    0.302965] pci 0000:00:1e.0:   bridge window [io  0xa000-0xafff]
[    0.302972] pci 0000:00:1e.0:   bridge window [mem 0xe2000000-0xe3ffffff]
[    0.302978] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xc00fffff pref]
[    0.303005] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.303013] pci 0000:00:1c.0: setting latency timer to 64
[    0.303023] pci 0000:00:1e.0: setting latency timer to 64
[    0.303030] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.303033] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[    0.303038] pci_bus 0000:01: resource 0 [io  0x9000-0x9fff]
[    0.303041] pci_bus 0000:01: resource 1 [mem 0xe0000000-0xe1ffffff]
[    0.303045] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.303049] pci_bus 0000:02: resource 0 [io  0xa000-0xafff]
[    0.303053] pci_bus 0000:02: resource 1 [mem 0xe2000000-0xe3ffffff]
[    0.303057] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc00fffff pref]
[    0.303060] pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
[    0.303064] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[    0.303120] NET: Registered protocol family 2
[    0.303228] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.303628] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.304278] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.304592] TCP: Hash tables configured (established 131072 bind 65536)
[    0.304595] TCP reno registered
[    0.304600] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.304611] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.304702] NET: Registered protocol family 1
[    0.304753] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.304774] pci 0000:00:1d.0: PCI INT A disabled
[    0.304794] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.304814] pci 0000:00:1d.1: PCI INT B disabled
[    0.304831] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.304850] pci 0000:00:1d.2: PCI INT C disabled
[    0.304862] pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    0.304883] pci 0000:00:1d.3: PCI INT D disabled
[    0.304896] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.304928] pci 0000:00:1d.7: PCI INT A disabled
[    0.304952] pci 0000:01:00.0: Boot video device
[    0.304964] PCI: CLS 32 bytes, default 64
[    0.305488] audit: initializing netlink socket (disabled)
[    0.305500] type=2000 audit(1392561605.300:1): initialized
[    0.340494] highmem bounce pool size: 64 pages
[    0.340505] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.356866] VFS: Disk quotas dquot_6.5.2
[    0.356966] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.357906] fuse init (API version 7.17)
[    0.358067] msgmni has been set to 1654
[    0.358609] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.358653] io scheduler noop registered
[    0.358657] io scheduler deadline registered
[    0.358669] io scheduler cfq registered (default)
[    0.358848] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.358910] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.359048] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.359090] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.359346] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.359356] ACPI: Power Button [PWRB]
[    0.359449] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.359455] ACPI: Power Button [PWRF]
[    0.361849] ERST: Table is not found!
[    0.361853] GHES: HEST is not enabled!
[    0.361996] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.382446] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.382483] isapnp: Scanning for PnP cards...
[    0.538877] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.630851] Freeing initrd memory: 13796k freed
[    0.756515] isapnp: No Plug & Play device found
[    0.868635] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.892479] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.892869] Linux agpgart interface v0.103
[    0.895534] brd: module loaded
[    0.896778] loop: module loaded
[    0.897006] ata_piix 0000:00:1f.2: version 2.13
[    0.897027] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.897035] ata_piix 0000:00:1f.2: MAP [ IDE IDE P1 P3 ]
[    0.897092] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.897651] scsi0 : ata_piix
[    0.897791] scsi1 : ata_piix
[    0.898669] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    0.898674] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    0.899379] Fixed MDIO Bus: probed
[    0.899416] tun: Universal TUN/TAP device driver, 1.6
[    0.899420] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.899497] PPP generic driver version 2.4.2
[    0.899654] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.899679] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.899702] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.899708] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.899777] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.899806] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    0.903689] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.903713] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe4004000
[    0.916030] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.916269] hub 1-0:1.0: USB hub found
[    0.916276] hub 1-0:1.0: 8 ports detected
[    0.916409] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.916432] uhci_hcd: USB Universal Host Controller Interface driver
[    0.916461] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.916472] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.916477] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.916545] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.916574] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000bc00
[    0.916782] hub 2-0:1.0: USB hub found
[    0.916789] hub 2-0:1.0: 2 ports detected
[    0.916894] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.916905] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.916909] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.916980] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.917020] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b000
[    0.917226] hub 3-0:1.0: USB hub found
[    0.917233] hub 3-0:1.0: 2 ports detected
[    0.917337] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.917347] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.917352] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.917423] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.917465] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b400
[    0.917673] hub 4-0:1.0: USB hub found
[    0.917679] hub 4-0:1.0: 2 ports detected
[    0.917785] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    0.917796] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.917800] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.917865] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.917904] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000b800
[    0.918114] hub 5-0:1.0: USB hub found
[    0.918120] hub 5-0:1.0: 2 ports detected
[    0.918311] usbcore: registered new interface driver libusual
[    0.918386] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.918390] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.918550] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.918713] mousedev: PS/2 mouse device common for all mice
[    0.918916] rtc_cmos 00:03: RTC can wake from S4
[    0.919054] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.919084] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.919194] device-mapper: uevent: version 1.0.3
[    0.919314] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    0.919372] EISA: Probing bus 0 at eisa.0
[    0.919405] EISA: Detected 0 cards.
[    0.919418] cpufreq-nforce2: No nForce2 chipset.
[    0.919423] cpuidle: using governor ladder
[    0.919426] cpuidle: using governor menu
[    0.919429] EFI Variables Facility v0.08 2004-May-17
[    0.919869] TCP cubic registered
[    0.920093] NET: Registered protocol family 10
[    0.921117] NET: Registered protocol family 17
[    0.921142] Registering the dns_resolver key type
[    0.921170] Using IPI No-Shortcut mode
[    0.921335] PM: Hibernation image not present or could not be loaded.
[    0.921353] registered taskstats version 1
[    0.938681]   Magic number: 2:793:687
[    0.938783] rtc_cmos 00:03: setting system clock to 2014-02-16 14:40:07 UTC (1392561607)
[    0.939858] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.939861] EDD information not available.
[    0.940039] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    1.063468] ata1.00: ATAPI: HL-DT-STDVD-RAM GSA-H22N, 1.01, max UDMA/66
[    1.076286] ata1.00: configured for UDMA/66
[    1.078912] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVD-RAM GSA-H22N 1.01 PQ: 0 ANSI: 5
[    1.081586] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.081592] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.081781] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.081965] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.095741] ata2.01: ATA-8: MAXTOR STM3160813AS, MC1H, max UDMA/133
[    1.095748] ata2.01: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.151573] ata2.01: configured for UDMA/133
[    1.151735] scsi 1:0:1:0: Direct-Access     ATA      MAXTOR STM316081 MC1H PQ: 0 ANSI: 5
[    1.151970] sd 1:0:1:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.152036] sd 1:0:1:0: Attached scsi generic sg1 type 0
[    1.152085] sd 1:0:1:0: [sda] Write Protect is off
[    1.152090] sd 1:0:1:0: [sda] Mode Sense: 00 3a 00 00
[    1.152135] sd 1:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.184364]  sda: sda1 sda2 < sda5 >
[    1.184927] sd 1:0:1:0: [sda] Attached SCSI disk
[    1.184987] Freeing unused kernel memory: 712k freed
[    1.185447] Write protecting the kernel text: 5628k
[    1.185532] Write protecting the kernel read-only data: 2324k
[    1.213274] udevd[89]: starting version 175
[    1.228047] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    1.304043] Refined TSC clocksource calibration: 2792.999 MHz.
[    1.304053] Switching to clocksource tsc
[    1.326849] Floppy drive(s): fd0 is 1.44M
[    1.339176] skge 0000:02:05.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    1.339234] skge: 1.14 addr 0xe3000000 irq 21 chip Yukon-Lite rev 9
[    1.340648] skge 0000:02:05.0: eth0: addr 00:16:e6:6e:5b:c4
[    1.347884] FDC 0 is a post-1991 82077
[    1.371506] Initializing USB Mass Storage driver...
[    1.371670] scsi2 : usb-storage 1-1:1.0
[    1.371809] usbcore: registered new interface driver usb-storage
[    1.371813] USB Mass Storage support registered.
[    1.476028] usb 1-6: new high-speed USB device number 3 using ehci_hcd
[    1.625332] EXT4-fs (sda5): INFO: recovery required on readonly filesystem
[    1.625338] EXT4-fs (sda5): write access will be enabled during recovery
[    1.704810] EXT4-fs (sda5): recovery complete
[    1.707707] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    2.128044] usb 5-1: new full-speed USB device number 2 using uhci_hcd
[    2.368676] scsi 2:0:0:0: Direct-Access     SanDisk  Cruzer Blade     1.20 PQ: 0 ANSI: 5
[    2.369422] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    2.370279] sd 2:0:0:0: [sdb] 31266816 512-byte logical blocks: (16.0 GB/14.9 GiB)
[    2.371398] sd 2:0:0:0: [sdb] Write Protect is off
[    2.371404] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
[    2.372149] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    2.376754]  sdb: sdb1
[    2.379272] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[    2.564042] usb 5-2: new low-speed USB device number 3 using uhci_hcd
[   12.280398] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   12.331140] udevd[285]: starting version 175
[   12.353245] Adding 976556k swap on /dev/sda1.  Priority:-1 extents:1 across:976556k
[   12.406613] lp: driver loaded but no devices found
[   12.437214] intel_rng: FWH not detected
[   12.461968] leds_ss4200: no LED devices found
[   12.480116] [drm] Initialized drm 1.1.0 20060810
[   12.557070] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   12.604048] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   12.604120] snd_hda_intel 0000:00:1b.0: irq 41 for MSI/MSI-X
[   12.604159] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[   12.633752] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/input/input3
[   12.645237] generic-usb 0003:15D9:0A4F.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.3-2/input0
[   12.645271] usbcore: registered new interface driver usbhid
[   12.645275] usbhid: USB HID core driver
[   12.674159] hda_codec: ALC883: BIOS auto-probing.
[   12.685421] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[   12.685856] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[   12.685987] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   12.686113] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   12.686235] input: HDA Intel Line-Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   12.688682] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   12.688778] snd_hda_intel 0000:01:00.1: irq 42 for MSI/MSI-X
[   12.688820] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[   12.705238] parport_pc 00:09: reported by Plug and Play ACPI
[   12.705288] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   12.718283] Linux video capture interface: v2.00
[   12.728327] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[   12.728563] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1c.0/0000:01:00.1/sound/card1/input9
[   12.737289] [drm] radeon defaulting to kernel modesetting.
[   12.737294] [drm] radeon kernel modesetting enabled.
[   12.737363] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   12.737372] radeon 0000:01:00.0: setting latency timer to 64
[   12.743070] gspca_main: v2.14.0 registered
[   12.743652] gspca_main: zc3xx-2.14.0 probing 0ac8:303b
[   12.765516] [drm] initializing kernel modesetting (RV730 0x1002:0x9498 0x1043:0x0292).
[   12.765554] [drm] register mmio base: 0xE1000000
[   12.765558] [drm] register mmio size: 65536
[   12.765695] ATOM BIOS: 9498.11.15.0.8.AS03
[   12.765733] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[   12.765738] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[   12.767587] [drm] Detected VRAM RAM=1024M, BAR=256M
[   12.767592] [drm] RAM width 128bits DDR
[   12.772108] [TTM] Zone  kernel: Available graphics memory: 430846 kiB.
[   12.772113] [TTM] Zone highmem: Available graphics memory: 1549026 kiB.
[   12.772117] [TTM] Initializing pool allocator.
[   12.772148] [drm] radeon: 1024M of VRAM memory ready
[   12.772151] [drm] radeon: 512M of GTT memory ready.
[   12.772173] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   12.772176] [drm] Driver supports precise vblank timestamp query.
[   12.772255] radeon 0000:01:00.0: irq 43 for MSI/MSI-X
[   12.772270] radeon 0000:01:00.0: radeon: using MSI.
[   12.772360] [drm] radeon: irq initialized.
[   12.772367] [drm] GART: num cpu pages 131072, num gpu pages 131072
[   12.804524] lp0: using parport0 (interrupt-driven).
[   12.805631] [drm] Loading RV730 Microcode
[   12.872527] Bluetooth: Core ver 2.16
[   12.872566] NET: Registered protocol family 31
[   12.872570] Bluetooth: HCI device and connection manager initialized
[   12.872574] Bluetooth: HCI socket layer initialized
[   12.872578] Bluetooth: L2CAP socket layer initialized
[   12.872598] Bluetooth: SCO socket layer initialized
[   12.873807] ppdev: user-space parallel port driver
[   12.895535] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   12.895541] Bluetooth: BNEP filters: protocol multicast
[   12.996791] Bluetooth: RFCOMM TTY layer initialized
[   12.996805] Bluetooth: RFCOMM socket layer initialized
[   12.996809] Bluetooth: RFCOMM ver 1.11
[   13.196477] input: zc3xx as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/input/input10
[   13.196668] usbcore: registered new interface driver zc3xx
[   13.259348] skge 0000:02:05.0: eth0: enabling interface
[   13.277029] skge 0000:02:05.0: eth0: disabling interface
[   13.280296] skge 0000:02:05.0: eth0: enabling interface
[   13.284298] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   13.291169] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   13.291355] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   13.413571] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[   13.414938] radeon 0000:01:00.0: WB enabled
[   13.462828] [drm] ring test succeeded in 1 usecs
[   13.463103] [drm] radeon: ib pool ready.
[   13.463245] [drm] ib test succeeded in 0 usecs
[   13.463836] [drm] Radeon Display Connectors
[   13.463840] [drm] Connector 0:
[   13.463843] [drm]   HDMI-A
[   13.463845] [drm]   HPD2
[   13.463849] [drm]   DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[   13.463852] [drm]   Encoders:
[   13.463855] [drm]     DFP2: INTERNAL_UNIPHY1
[   13.463857] [drm] Connector 1:
[   13.463860] [drm]   VGA
[   13.463863] [drm]   DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
[   13.463866] [drm]   Encoders:
[   13.463868] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[   13.463871] [drm] Connector 2:
[   13.463873] [drm]   DVI-I
[   13.463876] [drm]   HPD1
[   13.463879] [drm]   DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[   13.463882] [drm]   Encoders:
[   13.463884] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   13.463887] [drm]     DFP1: INTERNAL_UNIPHY
[   13.463918] [drm] Internal thermal controller without fan control
[   13.463987] [drm] radeon: power management initialized
[   13.548598] [drm] fb mappable at 0xD0142000
[   13.548603] [drm] vram apper at 0xD0000000
[   13.548605] [drm] size 5242880
[   13.548608] [drm] fb depth is 24
[   13.548611] [drm]    pitch is 5120
[   13.548773] fbcon: radeondrmfb (fb0) is primary device
[   13.978146] Console: switching to colour frame buffer device 160x64
[   13.992100] fb0: radeondrmfb frame buffer device
[   13.992103] drm: registered panic notifier
[   13.992137] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0
[   18.202004] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.202447] skge 0000:02:05.0: eth0: disabling interface
[   18.205685] skge 0000:02:05.0: eth0: enabling interface
[   18.209075] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  133.115779] init: failsafe main process (564) killed by TERM signal


_____

dmesg | tail

Kod Seç Genişlet


[   13.548773] fbcon: radeondrmfb (fb0) is primary device
[   13.978146] Console: switching to colour frame buffer device 160x64
[   13.992100] fb0: radeondrmfb frame buffer device
[   13.992103] drm: registered panic notifier
[   13.992137] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0
[   18.202004] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.202447] skge 0000:02:05.0: eth0: disabling interface
[   18.205685] skge 0000:02:05.0: eth0: enabling interface
[   18.209075] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  133.115779] init: failsafe main process (564) killed by TERM signal

[Aequitas]

Eğer biostan Maxtor sabit diskini birincil disk olarak ayarlarsan açılışta sana hangi işletim sistemiyle bilgisayarını açmak istediğini soracaktır diye düşünüyorum. Eğer sormadan direkt Cinnamon açılacak olursa da GRUB'da ufak tefek birkaç ayarlamadan sonra bu sorunun ortadan kalkacaktır.
Kablosuz bağlantı sorunuyla alakalı olarak da wlan0 yerine ath0 deneyebilirsin. Kullandığın karta göre değişiyor sanırım bunların kısa isimleri, benim önceki netbook'ta ath0 diye geçiyordu yanlış hatırlamıyorsam.

Yukarıdaki çıktılarda zaten kablosuz arayüzün görünmüyor. Donanımı sistem görmüyor sanırım. Kullandığın kablosuz modemin ismini ubuntu ile eşleyerek sürücü kurma konularında arama yapmanda fayda var.

[unheil]

Sanırım bir şey anlamadım. rfkill ve wlan0 diye bir şey yok bilgisayarımda. bunun yanı sıra lsusb yaptığımda Airties modemimi görebiliyorum listede. Acaba neden bağlantı yapamıyorum

[heartsmagic]

Linux Mint 13 hangi Ubuntu sürümüne dayanıyor, 12.04 mü?
Bunun haricinde, Ubuntu 13.10 kurma şansın var mı? Zira ndsiwrapper'ı deneyeceksek 13.10 sürümünde daha rahat hareket ediyoruz. Yok kuramam diyorsan da Mint'in hangi sürüme dayandığını bilmek gerekecek.

[unheil]

Fazla bilgim yok cinnamon 13 yazıyor

DISTRIB_ID=LinuxMint
DISTRIB_RELEASE=13
DISTRIB_CODENAME=maya
DISTRIB_DESCRIPTION="Linux Mint 13 Maya"

Linux KAAN 3.2.0-23-generic #36-Ubuntu SMP Tue Apr 10 20:41:14 UTC 2012 i686 i686 i386 GNU/Linux

[heartsmagic]

12.04'e dayanıyormuş sanırım, 13.10 kurabilme olasılığın nedir?

Bu aygıt için forumda başlıklar mevcut:
http://forum.ubuntu-tr.net/index.php?topic=21380.0

Ancak sendeki Mint ile işe yarar mı bilemiyorum. Metin düzenleyici nedir Cinnamon üzerinde? Örneğin Gedit mi? Eğer öyleyse:

Kod Seç Genişlet

sudo -H gedit /etc/modprobe.d/blacklist.conf
ile dosyayı aç ve en altına şunu yaz:

blacklist rt2800usb

kaydet kapat, ardından sistemi yeniden başlatıp:

Kod Seç Genişlet

lsmod
ifconfig
çıktılarını buraya geç. Ancak dediğim gibi metin düzenleyici neyse onu kullan.