TP-LINK TL-WN727N ve Kubuntu 13.10 x64

Başlatan adilalpman, 28 Aralık 2013 - 18:44:35

« önceki - sonraki »

0 Üyeler ve 1 Ziyaretçi konuyu incelemekte.

adilalpman

 Merhaba;

Kubuntu 13.10 x64 kurulu laptop umda cihazın kendi tümleşik wireless chip i geçtiğimiz günlerde problem yarattığından bir adet konu kısmında belirttiğim usb aygıttan satın aldım. (Bu arada tümleşik wireless chip ini kubuntunun görmesini nasıl toptan engellerim bunu da öğrenirsem süper olur, zira bunu bios tan kapatamıyorum...)

Cihazı Network Manager da görebiliyorum ancak nedense sağ altta kablolu ethernet ile bağlıyken oradaki ikona tıkladığımda açılan pencerede yine sağ alttaki "Wireless Enabled" butonuna tıklayamıyorum çünkü orası koyu gri görünüyor... :(

Laptop um grub.conf dan başlangıçta text mode da açılacak şekile ayarlı ve sonradan root olup x i elle başlatarak grafik arayüzünü açıyorum... (nvidia driverlarımda ilk başta sorun olduğundan onları elle kurana kadar böyle yapmıştım)...

lsusb çıktımı aşağıda gönderiyorum ve yardımınızı rica ediyorum...

Şimdiden teşekkür ederim...


root@alpman-kubuntu:~# lsusb
Bus 001 Device 005: ID 0db0:6877 Micro Star International RT2573
Bus 001 Device 004: ID 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 003: ID 09da:054f A4 Tech Co., Ltd
Bus 002 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

heartsmagic

agkomut
çıktılarını da görebilir miyiz?
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?


Böylece yalan, dünyanın düzenine dönüştürülüyor.

adilalpman


Merhaba;

Ağ komutları çıktıları aşağıdadır;

root@alpman-kubuntu:~# cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=13.10
DISTRIB_CODENAME=saucy
DISTRIB_DESCRIPTION="Ubuntu 13.10"


root@alpman-kubuntu:~# uname -a
Linux alpman-kubuntu 3.11.0-12-generic #19-Ubuntu SMP Wed Oct 9 16:20:46 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux


root@alpman-kubuntu:~# lspci
00:00.0 RAM memory: NVIDIA Corporation C51 Host Bridge (rev a2)
00:00.2 RAM memory: NVIDIA Corporation C51 Memory Controller 1 (rev a2)
00:00.3 RAM memory: NVIDIA Corporation C51 Memory Controller 5 (rev a2)
00:00.4 RAM memory: NVIDIA Corporation C51 Memory Controller 4 (rev a2)
00:00.5 RAM memory: NVIDIA Corporation C51 Host Bridge (rev a2)
00:00.6 RAM memory: NVIDIA Corporation C51 Memory Controller 3 (rev a2)
00:00.7 RAM memory: NVIDIA Corporation C51 Memory Controller 2 (rev a2)
00:03.0 PCI bridge: NVIDIA Corporation C51 PCI Express Bridge (rev a1)
00:05.0 VGA compatible controller: NVIDIA Corporation C51 [GeForce Go 6100] (rev a2)
00:09.0 RAM memory: NVIDIA Corporation MCP51 Host Bridge (rev a2)
00:0a.0 ISA bridge: NVIDIA Corporation MCP51 LPC Bridge (rev a3)
00:0a.1 SMBus: NVIDIA Corporation MCP51 SMBus (rev a3)
00:0a.3 Co-processor: NVIDIA Corporation MCP51 PMU (rev a3)
00:0b.0 USB controller: NVIDIA Corporation MCP51 USB Controller (rev a3)
00:0b.1 USB controller: NVIDIA Corporation MCP51 USB Controller (rev a3)
00:0d.0 IDE interface: NVIDIA Corporation MCP51 IDE (rev a1)
00:0e.0 IDE interface: NVIDIA Corporation MCP51 Serial ATA Controller (rev a1)
00:10.0 PCI bridge: NVIDIA Corporation MCP51 PCI Bridge (rev a2)
00:10.1 Audio device: NVIDIA Corporation MCP51 High Definition Audio (rev a2)
00:14.0 Bridge: NVIDIA Corporation MCP51 Ethernet Controller (rev a3)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Miscellaneous Control


root@alpman-kubuntu:~# lsusb
Bus 001 Device 005: ID 0db0:6877 Micro Star International RT2573
Bus 001 Device 004: ID 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 003: ID 09da:054f A4 Tech Co., Ltd
Bus 002 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


root@alpman-kubuntu:~# rfkill list
0: hci0: Bluetooth
        Soft blocked: no
        Hard blocked: no
1: phy0: Wireless LAN
        Soft blocked: no
        Hard blocked: yes
2: phy1: Wireless LAN
        Soft blocked: no
        Hard blocked: no


root@alpman-kubuntu:~# lshw -C network
PCI (sysfs) 
  *-network:0 DISABLED   
       description: Wireless interface
       physical id: 1
       bus info: usb@1:6
       logical name: wlan1
       serial: f8:1a:67:1b:ef:7b
       capabilities: ethernet physical wireless
       configuration: broadcast=yes driver=rt2800usb driverversion=3.11.0-12-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11bgn
  *-network:1 DISABLED
       description: Wireless interface
       physical id: 2
       bus info: usb@1:8
       logical name: wlan0
       serial: 00:1d:92:11:9a:12
       capabilities: ethernet physical wireless
       configuration: broadcast=yes driver=rt73usb driverversion=3.11.0-12-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11bg


root@alpman-kubuntu:~# ifconfig
eth0      Link encap:Ethernet  HWaddr 00:1d:92:4c:ef:3b 
          inet addr:192.168.2.11  Bcast:192.168.2.255  Mask:255.255.255.0
          inet6 addr: fe80::21d:92ff:fe4c:ef3b/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1492  Metric:1
          RX packets:1719 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1495 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:1019934 (1.0 MB)  TX bytes:244976 (244.9 KB)

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:445 errors:0 dropped:0 overruns:0 frame:0
          TX packets:445 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:55077 (55.0 KB)  TX bytes:55077 (55.0 KB)


root@alpman-kubuntu:~# iwconfig
wlan1     IEEE 802.11bgn  ESSID:off/any 
          Mode:Managed  Access Point: Not-Associated   Tx-Power=0 dBm   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:on
         
eth0      no wireless extensions.

lo        no wireless extensions.

wlan0     IEEE 802.11bg  ESSID:off/any 
          Mode:Managed  Access Point: Not-Associated   Tx-Power=off   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:on


root@alpman-kubuntu:~# iwlist scanning
wlan1     Interface doesn't support scanning : Network is down

eth0      Interface doesn't support scanning.

lo        Interface doesn't support scanning.

wlan0     Interface doesn't support scanning : Network is down


root@alpman-kubuntu:~# lsmod
Module                  Size  Used by
parport_pc             32701  0
ppdev                  17671  0
bnep                   19564  2
rfcomm                 69070  16
nvidia              11334964  42
arc4                   12608  4
snd_hda_codec_si3054    13008  1
rt2800usb              27005  0
rt73usb                31467  0
snd_hda_codec_realtek    51465  1
rt2x00usb              20713  2 rt73usb,rt2800usb
rt2800lib              79963  1 rt2800usb
rt2x00lib              55238  4 rt73usb,rt2x00usb,rt2800lib,rt2800usb
mac80211              596969  3 rt2x00lib,rt2x00usb,rt2800lib
cfg80211              479757  2 mac80211,rt2x00lib
crc_itu_t              12707  1 rt73usb
crc_ccitt              12707  1 rt2800lib
snd_hda_intel          48171  3
snd_hda_codec         188738  3 snd_hda_codec_realtek,snd_hda_codec_si3054,snd_hda_intel
snd_hwdep              13602  1 snd_hda_codec
snd_pcm               102033  3 snd_hda_codec_si3054,snd_hda_codec,snd_hda_intel
kvm_amd                59958  0
kvm                   431315  1 kvm_amd
snd_page_alloc         18710  2 snd_pcm,snd_hda_intel
joydev                 17377  0
snd_seq_midi           13324  0
snd_seq_midi_event     14899  1 snd_seq_midi
snd_rawmidi            30095  1 snd_seq_midi
snd_seq                61560  2 snd_seq_midi_event,snd_seq_midi
btusb                  28267  0
snd_seq_device         14497  3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer              29433  2 snd_pcm,snd_seq
bluetooth             371874  22 bnep,btusb,rfcomm
snd                    69141  17 snd_hda_codec_realtek,snd_hda_codec_si3054,snd_hwdep,snd_timer,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi
psmouse                97626  0
soundcore              12680  1 snd
nv_tco                 13564  0
serio_raw              13413  0
edac_core              62312  0
k8temp                 12978  0
i2c_nforce2            13221  0
edac_mce_amd           22617  0
binfmt_misc            17468  1
mac_hid                13205  0
lp                     17759  0
parport                42299  3 lp,ppdev,parport_pc
vesafb                 13828  1
hid_generic            12548  0
usbhid                 53014  0
hid                   101512  2 hid_generic,usbhid
pata_acpi              13038  0
sata_nv                27716  2
forcedeth              67371  0
pata_amd               18225  0
ohci_pci               13561  0
video                  19318  0


root@alpman-kubuntu:~# dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.11.0-12-generic (buildd@allspice) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu7) ) #19-Ubuntu SMP Wed Oct 9 16:20:46 UTC 2013 (Ubuntu 3.11.0-12.19-generic 3.11.3)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=5ce86078-5114-4235-9483-00a4769c284c ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000077fcffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000077fd0000-0x0000000077fddfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x0000000077fde000-0x0000000077ffffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: Micro-Star International VR330/MS-1326X, BIOS A1326NMS V1.05 07/05/2007
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x77fd0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FFC0000000 write-back
[    0.000000]   1 base 0040000000 mask FFE0000000 write-back
[    0.000000]   2 base 0060000000 mask FFF0000000 write-back
[    0.000000]   3 base 0070000000 mask FFF8000000 write-back
[    0.000000]   4 base 00000F8000 mask 0FFFFF8000 write-protect
[    0.000000]   5 base 00000DC000 mask 0FFFFFE000 write-back
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
[    0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
[    0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
[    0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01fd1000, 0x01fd1fff] PGTABLE
[    0.000000] BRK [0x01fd2000, 0x01fd2fff] PGTABLE
[    0.000000] BRK [0x01fd3000, 0x01fd3fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x77c00000-0x77dfffff]
[    0.000000]  [mem 0x77c00000-0x77dfffff] page 2M
[    0.000000] BRK [0x01fd4000, 0x01fd4fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x74000000-0x77bfffff]
[    0.000000]  [mem 0x74000000-0x77bfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x73ffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x73ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x77e00000-0x77fcffff]
[    0.000000]  [mem 0x77e00000-0x77fcffff] page 4k
[    0.000000] BRK [0x01fd5000, 0x01fd5fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x34fbc000-0x367d5fff]
[    0.000000] ACPI: RSDP 00000000000f8aa0 00014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 0000000077fd0000 00040 (v01 MSI_NB MEGABOOK 07050007 MSFT 00000097)
[    0.000000] ACPI: FACP 0000000077fd0200 00084 (v02 MSI_NB MEGABOOK 07050007 MSFT 00000097)
[    0.000000] ACPI: DSDT 0000000077fd05c0 04509 (v01                 00000007 INTL 20051117)
[    0.000000] ACPI: FACS 0000000077fde000 00040
[    0.000000] ACPI: APIC 0000000077fd0390 00070 (v01 MSI_NB MEGABOOK 07050007 MSFT 00000097)
[    0.000000] ACPI: MCFG 0000000077fd0400 0003C (v01 MSI_NB MEGABOOK 07050007 MSFT 00000097)
[    0.000000] ACPI: SLIC 0000000077fd0440 00176 (v01 MSI_NB MEGABOOK 07050007 MSFT 00000097)
[    0.000000] ACPI: OEMB 0000000077fde040 00060 (v01 MSI_NB MEGABOOK 07050007 MSFT 00000097)
[    0.000000] ACPI: HPET 0000000077fd4ad0 00038 (v01 MSI_NB MEGABOOK 07050007 MSFT 00000097)
[    0.000000] ACPI: SSDT 0000000077fd4b10 0022E (v01 A M I  POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x0000000077fcffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x77fcffff]
[    0.000000]   NODE_DATA [mem 0x77fcb000-0x77fcffff]
[    0.000000]  [ffffea0000000000-ffffea0001dfffff] PMD -> [ffff880075800000-ffff8800775fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x77fcffff]
[    0.000000] On node 0 totalpages: 491374
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7616 pages used for memmap
[    0.000000]   DMA32 zone: 487376 pages, LIFO batch:31
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] e820: [mem 0x78000000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff880077c00000 s86720 r8192 d23872 u1048576
[    0.000000] pcpu-alloc: s86720 r8192 d23872 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 483673
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=5ce86078-5114-4235-9483-00a4769c284c ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Node 0: aperture @ 40000000 size 32 MB
[    0.000000] Aperture pointing to e820 RAM. Ignoring.
[    0.000000] Memory: 1893288K/1965496K available (7141K kernel code, 1082K rwdata, 3260K rodata, 1364K init, 1420K bss, 72208K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[    0.000000]  Offload RCU callbacks from all CPUs
[    0.000000]  Offload RCU callbacks from CPUs: 0-255.
[    0.000000] NR_IRQS:16640 nr_irqs:512 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 7864320 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1808.257 MHz processor
[    0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[    0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3616.51 BogoMIPS (lpj=7233028)
[    0.004012] pid_max: default: 32768 minimum: 301
[    0.004054] Security Framework initialized
[    0.004083] AppArmor: AppArmor initialized
[    0.004085] Yama: becoming mindful.
[    0.004405] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.005871] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.006563] Mount-cache hash table entries: 256
[    0.006897] Initializing cgroup subsys memory
[    0.006924] Initializing cgroup subsys devices
[    0.006928] Initializing cgroup subsys freezer
[    0.006931] Initializing cgroup subsys blkio
[    0.006933] Initializing cgroup subsys perf_event
[    0.006937] Initializing cgroup subsys hugetlb
[    0.006965] tseg: 0000000000
[    0.006976] CPU: Physical Processor ID: 0
[    0.006977] CPU: Processor Core ID: 0
[    0.006980] mce: CPU supports 5 MCE banks
[    0.006990] LVT offset 0 assigned for vector 0xf9
[    0.006996] process: using AMD E400 aware idle routine
[    0.006999] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.006999] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.006999] tlb_flushall_shift: 4
[    0.007125] Freeing SMP alternatives memory: 28K (ffffffff81e65000 - ffffffff81e6c000)
[    0.010208] ACPI: Core revision 20130517
[    0.013594] ACPI: All ACPI Tables successfully acquired
[    0.016012] ftrace: allocating 27796 entries in 109 pages
[    0.028806] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.069264] smpboot: CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-56 (fam: 0f, model: 48, stepping: 02)
[    0.072000] Performance Events: AMD PMU driver.
[    0.072000] ... version:                0
[    0.072000] ... bit width:              48
[    0.072000] ... generic registers:      4
[    0.072000] ... value mask:             0000ffffffffffff
[    0.072000] ... max period:             00007fffffffffff
[    0.072000] ... fixed-purpose events:   0
[    0.072000] ... event mask:             000000000000000f
[    0.072000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.072000] smpboot: Booting Node   0, Processors  #1 OK
[    0.160137] Brought up 2 CPUs
[    0.160140] smpboot: Total of 2 processors activated (7233.09 BogoMIPS)
[    0.160771] devtmpfs: initialized
[    0.162247] EVM: security.selinux
[    0.162250] EVM: security.SMACK64
[    0.162251] EVM: security.capability
[    0.162310] PM: Registering ACPI NVS region [mem 0x77fde000-0x77ffffff] (139264 bytes)
[    0.165221] regulator-dummy: no parameters
[    0.165268] RTC time: 12:01:45, date: 12/29/13
[    0.165337] NET: Registered protocol family 16
[    0.165542] node 0 link 0: io port [1000, ffffff]
[    0.165546] TOM: 0000000080000000 aka 2048M
[    0.165549] node 0 link 0: mmio [e0000000, efffffff]
[    0.165554] node 0 link 0: mmio [a0000, bffff]
[    0.165557] node 0 link 0: mmio [80000000, fe0bffff]
[    0.165561] bus: [bus 00-ff] on node 0 link 0
[    0.165563] bus: 00 [io  0x0000-0xffff]
[    0.165566] bus: 00 [mem 0x80000000-0xfcffffffff]
[    0.165568] bus: 00 [mem 0x000a0000-0x000bffff]
[    0.165628] ACPI: bus type PCI registered
[    0.165632] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.165718] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.165722] PCI: not using MMCONFIG
[    0.165724] PCI: Using configuration type 1 for base access
[    0.167222] bio: create slab <bio-0> at 0
[    0.167222] ACPI: Added _OSI(Module Device)
[    0.167222] ACPI: Added _OSI(Processor Device)
[    0.167222] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.167222] ACPI: Added _OSI(Processor Aggregator Device)
[    0.168783] ACPI: EC: Detected MSI hardware, enabling workarounds.
[    0.168787] ACPI: EC: Look up EC in DSDT
[    0.169854] ACPI: Executed 1 blocks of module-level executable AML code
[    0.172555] ACPI: Interpreter enabled
[    0.172565] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
[    0.172571] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
[    0.172593] ACPI: (supports S0 S3 S4 S5)
[    0.172596] ACPI: Using IOAPIC for interrupt routing
[    0.172628] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.173634] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.185904] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.186082] ACPI: No dock devices found.
[    0.190826] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.190850] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.194418] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.194426] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.194430] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.194579] acpi PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.194582] acpi PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.194586] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.194589] acpi PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[    0.194593] acpi PNP0A03:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
[    0.194596] PCI: root bus 00: hardware-probed resources
[    0.194741] PCI host bridge to bus 0000:00
[    0.194745] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.194748] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.194752] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfcffffffff]
[    0.194755] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.194769] pci 0000:00:00.0: [10de:02f3] type 00 class 0x050000
[    0.194907] pci 0000:00:00.2: [10de:02fe] type 00 class 0x050000
[    0.195024] pci 0000:00:00.3: [10de:02f8] type 00 class 0x050000
[    0.195138] pci 0000:00:00.4: [10de:02f9] type 00 class 0x050000
[    0.195256] pci 0000:00:00.5: [10de:02ff] type 00 class 0x050000
[    0.195376] pci 0000:00:00.6: [10de:027f] type 00 class 0x050000
[    0.195481] pci 0000:00:00.7: [10de:027e] type 00 class 0x050000
[    0.195610] pci 0000:00:03.0: [10de:02fd] type 01 class 0x060400
[    0.195645] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.195703] pci 0000:00:03.0: System wakeup disabled by ACPI
[    0.195752] pci 0000:00:05.0: [10de:0247] type 00 class 0x030000
[    0.195762] pci 0000:00:05.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[    0.195770] pci 0000:00:05.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.195777] pci 0000:00:05.0: reg 0x1c: [mem 0xfc000000-0xfcffffff 64bit]
[    0.195786] pci 0000:00:05.0: reg 0x30: [mem 0xfebe0000-0xfebfffff pref]
[    0.195904] pci 0000:00:09.0: [10de:0270] type 00 class 0x050000
[    0.196185] pci 0000:00:0a.0: [10de:0260] type 00 class 0x060100
[    0.196315] pci 0000:00:0a.1: [10de:0264] type 00 class 0x0c0500
[    0.196354] pci 0000:00:0a.1: reg 0x20: [io  0x5000-0x503f]
[    0.196363] pci 0000:00:0a.1: reg 0x24: [io  0x6000-0x603f]
[    0.196403] pci 0000:00:0a.1: PME# supported from D3hot D3cold
[    0.196510] pci 0000:00:0a.3: [10de:0271] type 00 class 0x0b4000
[    0.196530] pci 0000:00:0a.3: reg 0x10: [mem 0xfeb80000-0xfebbffff]
[    0.196725] pci 0000:00:0b.0: [10de:026d] type 00 class 0x0c0310
[    0.196739] pci 0000:00:0b.0: reg 0x10: [mem 0xfebde000-0xfebdefff]
[    0.196788] pci 0000:00:0b.0: supports D1 D2
[    0.196792] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.196887] pci 0000:00:0b.1: [10de:026e] type 00 class 0x0c0320
[    0.196901] pci 0000:00:0b.1: reg 0x10: [mem 0xfebdfc00-0xfebdfcff]
[    0.196954] pci 0000:00:0b.1: supports D1 D2
[    0.196957] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.197062] pci 0000:00:0d.0: [10de:0265] type 00 class 0x01018a
[    0.197090] pci 0000:00:0d.0: reg 0x20: [io  0xffa0-0xffaf]
[    0.197205] pci 0000:00:0e.0: [10de:0266] type 00 class 0x010185
[    0.197220] pci 0000:00:0e.0: reg 0x10: [io  0xe800-0xe807]
[    0.197228] pci 0000:00:0e.0: reg 0x14: [io  0xe480-0xe483]
[    0.197235] pci 0000:00:0e.0: reg 0x18: [io  0xe400-0xe407]
[    0.197243] pci 0000:00:0e.0: reg 0x1c: [io  0xe080-0xe083]
[    0.197251] pci 0000:00:0e.0: reg 0x20: [io  0xe000-0xe00f]
[    0.197259] pci 0000:00:0e.0: reg 0x24: [mem 0xfebdd000-0xfebddfff]
[    0.197381] pci 0000:00:10.0: [10de:026f] type 01 class 0x060401
[    0.197471] pci 0000:00:10.0: System wakeup disabled by ACPI
[    0.197526] pci 0000:00:10.1: [10de:026c] type 00 class 0x040300
[    0.197542] pci 0000:00:10.1: reg 0x10: [mem 0xfebd8000-0xfebdbfff]
[    0.197602] pci 0000:00:10.1: PME# supported from D3hot D3cold
[    0.197663] pci 0000:00:10.1: System wakeup disabled by ACPI
[    0.197721] pci 0000:00:14.0: [10de:0269] type 00 class 0x068000
[    0.197734] pci 0000:00:14.0: reg 0x10: [mem 0xfebdc000-0xfebdcfff]
[    0.197741] pci 0000:00:14.0: reg 0x14: [io  0xdc00-0xdc07]
[    0.197782] pci 0000:00:14.0: supports D1 D2
[    0.197785] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.197838] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.197890] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[    0.197988] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[    0.198078] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[    0.198170] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[    0.198368] acpiphp: Slot [1] registered
[    0.198378] pci 0000:00:03.0: PCI bridge to [bus 01-02]
[    0.198383] pci 0000:00:03.0:   bridge window [io  0xc000-0xcfff]
[    0.198387] pci 0000:00:03.0:   bridge window [mem 0xfa300000-0xfaafffff]
[    0.198393] pci 0000:00:03.0:   bridge window [mem 0xbdf00000-0xbfefffff 64bit pref]
[    0.198468] pci 0000:00:10.0: PCI bridge to [bus 03] (subtractive decode)
[    0.198476] pci 0000:00:10.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.198479] pci 0000:00:10.0:   bridge window [mem 0x80000000-0xfcffffffff] (subtractive decode)
[    0.198483] pci 0000:00:10.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.199061] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[    0.199198] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[    0.199333] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    0.199469] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    0.199603] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[    0.199737] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
[    0.199872] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *10
[    0.200018] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
[    0.200153] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
[    0.200286] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7
[    0.200420] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10
[    0.200564] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *5
[    0.200698] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
[    0.200833] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
[    0.200966] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *5
[    0.201106] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *11
[    0.201239] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *11
[    0.201381] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled.
[    0.201533] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[    0.201665] ACPI: Enabled 1 GPEs in block 00 to 1F
[    0.201676] ACPI: \_SB_.PCI0: notify handler is installed
[    0.201727] Found 1 acpi root devices
[    0.201777] ACPI: EC: GPE = 0x24, I/O: command/status = 0x66, data = 0x62
[    0.201921] vgaarb: device added: PCI:0000:00:05.0,decodes=io+mem,owns=io+mem,locks=none
[    0.201921] vgaarb: loaded
[    0.201921] vgaarb: bridge control possible 0000:00:05.0
[    0.201921] SCSI subsystem initialized
[    0.201921] ACPI: bus type ATA registered
[    0.201921] libata version 3.00 loaded.
[    0.201921] ACPI: bus type USB registered
[    0.201921] usbcore: registered new interface driver usbfs
[    0.201921] usbcore: registered new interface driver hub
[    0.201921] usbcore: registered new device driver usb
[    0.201921] PCI: Using ACPI for IRQ routing
[    0.210115] PCI: pci_cache_line_size set to 64 bytes
[    0.210176] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.210179] e820: reserve RAM buffer [mem 0x77fd0000-0x77ffffff]
[    0.210329] NetLabel: Initializing
[    0.210332] NetLabel:  domain hash size = 128
[    0.210333] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.210349] NetLabel:  unlabeled traffic allowed by default
[    0.210377] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.210377] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    0.210377] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    0.212049] Switched to clocksource hpet
[    0.222745] AppArmor: AppArmor Filesystem Enabled
[    0.222805] pnp: PnP ACPI init
[    0.222831] ACPI: bus type PNP registered
[    0.222893] pnp 00:00: [dma 4]
[    0.222929] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.222989] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.223097] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.223174] pnp 00:03: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    0.223208] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.223254] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.223380] system 00:06: [mem 0xfefe0000-0xfefe01ff] has been reserved
[    0.223386] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.223883] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    0.223888] system 00:07: [io  0x0800-0x080f] has been reserved
[    0.223892] system 00:07: [io  0x4000-0x407f] could not be reserved
[    0.223896] system 00:07: [io  0x4080-0x40ff] has been reserved
[    0.223900] system 00:07: [io  0x4400-0x447f] has been reserved
[    0.223904] system 00:07: [io  0x4480-0x44ff] has been reserved
[    0.223908] system 00:07: [io  0x4800-0x487f] has been reserved
[    0.223912] system 00:07: [io  0x4880-0x48ff] has been reserved
[    0.223917] system 00:07: [io  0x2000-0x207f] has been reserved
[    0.223921] system 00:07: [io  0x2080-0x20ff] has been reserved
[    0.223926] system 00:07: [mem 0x000d0000-0x000d3fff window] could not be reserved
[    0.223930] system 00:07: [mem 0x000d4000-0x000d7fff window] has been reserved
[    0.223934] system 00:07: [mem 0x000de000-0x000dffff window] has been reserved
[    0.223938] system 00:07: [mem 0xfee01000-0xfeefffff] has been reserved
[    0.223943] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.224089] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.224188] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.224193] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.224197] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.224347] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[    0.224351] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.224611] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.224616] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.224620] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.224624] system 00:0b: [mem 0x00100000-0x7fffffff] could not be reserved
[    0.224628] system 00:0b: [mem 0xfec00000-0xffffffff] could not be reserved
[    0.224632] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.225030] pnp: PnP ACPI: found 12 devices
[    0.225032] ACPI: bus type PNP unregistered
[    0.233144] pci 0000:00:03.0: PCI bridge to [bus 01-02]
[    0.233151] pci 0000:00:03.0:   bridge window [io  0xc000-0xcfff]
[    0.233155] pci 0000:00:03.0:   bridge window [mem 0xfa300000-0xfaafffff]
[    0.233160] pci 0000:00:03.0:   bridge window [mem 0xbdf00000-0xbfefffff 64bit pref]
[    0.233165] pci 0000:00:10.0: PCI bridge to [bus 03]
[    0.233183] pci 0000:00:10.0: setting latency timer to 64
[    0.233188] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.233191] pci_bus 0000:00: resource 5 [mem 0x80000000-0xfcffffffff]
[    0.233195] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.233198] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
[    0.233201] pci_bus 0000:01: resource 1 [mem 0xfa300000-0xfaafffff]
[    0.233205] pci_bus 0000:01: resource 2 [mem 0xbdf00000-0xbfefffff 64bit pref]
[    0.233209] pci_bus 0000:03: resource 4 [io  0x0000-0xffff]
[    0.233212] pci_bus 0000:03: resource 5 [mem 0x80000000-0xfcffffffff]
[    0.233215] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[    0.233277] NET: Registered protocol family 2
[    0.233514] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
[    0.233700] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.233845] TCP: Hash tables configured (established 16384 bind 16384)
[    0.233938] TCP: reno registered
[    0.233948] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.233980] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.234118] NET: Registered protocol family 1
[    0.234185] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.234194] pci 0000:00:05.0: Boot video device
[    0.234577] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    0.316381] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    0.316568] pci 0000:00:09.0: Found enabled HT MSI Mapping
[    0.316623] pci 0000:00:09.0: Found enabled HT MSI Mapping
[    0.316680] pci 0000:00:09.0: Found enabled HT MSI Mapping
[    0.316700] PCI: CLS 64 bytes, default 64
[    0.316784] Trying to unpack rootfs image as initramfs...
[    0.987497] Freeing initrd memory: 24680K (ffff880034fbc000 - ffff8800367d6000)
[    0.988057] Scanning for low memory corruption every 60 seconds
[    0.988372] Initialise module verification
[    0.988447] audit: initializing netlink socket (disabled)
[    0.988465] type=2000 audit(1388318505.988:1): initialized
[    1.026508] bounce pool size: 64 pages
[    1.026525] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.028704] zbud: loaded
[    1.028926] VFS: Disk quotas dquot_6.5.2
[    1.029008] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.029961] fuse init (API version 7.22)
[    1.030110] msgmni has been set to 3746
[    1.030948] Key type asymmetric registered
[    1.030951] Asymmetric key parser 'x509' registered
[    1.031006] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.031063] io scheduler noop registered
[    1.031066] io scheduler deadline registered (default)
[    1.031108] io scheduler cfq registered
[    1.031290] pcieport 0000:00:03.0: irq 40 for MSI/MSI-X
[    1.031388] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.031414] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.038242] ACPI: AC Adapter [ADP1] (on-line)
[    1.040142] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:03/PNP0C09:00/PNP0C0D:00/input/input0
[    1.043776] ACPI: Lid Switch [LID0]
[    1.043828] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:03/PNP0C09:00/PNP0C0E:00/input/input1
[    1.043833] ACPI: Sleep Button [SLPB]
[    1.043884] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[    1.043888] ACPI: Power Button [PWRB]
[    1.043938] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.043942] ACPI: Power Button [PWRF]
[    1.044319] thermal LNXTHERM:00: registered as thermal_zone0
[    1.044322] ACPI: Thermal Zone [THRM] (40 C)
[    1.044353] GHES: HEST is not enabled!
[    1.044488] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.046371] Linux agpgart interface v0.103
[    1.048305] brd: module loaded
[    1.049295] loop: module loaded
[    1.049876] libphy: Fixed MDIO Bus: probed
[    1.050003] tun: Universal TUN/TAP device driver, 1.6
[    1.050005] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.050059] PPP generic driver version 2.4.2
[    1.050116] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.050119] ehci-pci: EHCI PCI platform driver
[    1.050337] ehci-pci 0000:00:0b.1: setting latency timer to 64
[    1.050352] ehci-pci 0000:00:0b.1: EHCI Host Controller
[    1.050362] ehci-pci 0000:00:0b.1: new USB bus registered, assigned bus number 1
[    1.050374] ehci-pci 0000:00:0b.1: debug port 1
[    1.050402] ehci-pci 0000:00:0b.1: cache line size of 64 is not supported
[    1.050436] ehci-pci 0000:00:0b.1: irq 22, io mem 0xfebdfc00
[    1.060044] ehci-pci 0000:00:0b.1: USB 2.0 started, EHCI 1.00
[    1.060116] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.060120] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.060123] usb usb1: Product: EHCI Host Controller
[    1.060126] usb usb1: Manufacturer: Linux 3.11.0-12-generic ehci_hcd
[    1.060129] usb usb1: SerialNumber: 0000:00:0b.1
[    1.060267] hub 1-0:1.0: USB hub found
[    1.060273] hub 1-0:1.0: 8 ports detected
[    1.060486] ehci-platform: EHCI generic platform driver
[    1.060500] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.060502] ohci-platform: OHCI generic platform driver
[    1.060511] uhci_hcd: USB Universal Host Controller Interface driver
[    1.060602] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.061996] i8042: Detected active multiplexing controller, rev 1.1
[    1.062101] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.062108] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.062143] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.062176] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.062201] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.062354] mousedev: PS/2 mouse device common for all mice
[    1.062570] rtc_cmos 00:01: RTC can wake from S4
[    1.062746] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.062790] rtc_cmos 00:01: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    1.062886] device-mapper: uevent: version 1.0.3
[    1.062962] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[    1.062972] cpuidle: using governor ladder
[    1.062974] cpuidle: using governor menu
[    1.062990] ledtrig-cpu: registered to indicate activity on CPUs
[    1.063116] TCP: cubic registered
[    1.063260] NET: Registered protocol family 10
[    1.063571] NET: Registered protocol family 17
[    1.063585] Key type dns_resolver registered
[    1.063882] PM: Hibernation image not present or could not be loaded.
[    1.063887] Loading module verification certificates
[    1.065427] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: fddf6943d8ac4f5b6eb0919a7a3ee3d9088b1bfa'
[    1.065445] registered taskstats version 1
[    1.067273] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.073699] Key type trusted registered
[    1.081649] Key type encrypted registered
[    1.089657] AppArmor: AppArmor sha1 policy hashing enabled
[    1.089982]   Magic number: 9:450:27
[    1.089985]   hash matches /build/buildd/linux-3.11.0/drivers/base/power/main.c:643
[    1.090118] rtc_cmos 00:01: setting system clock to 2013-12-29 12:01:46 UTC (1388318506)
[    1.110903] powernow-k8: fid 0xa (1800 MHz), vid 0x13
[    1.110906] powernow-k8: fid 0x8 (1600 MHz), vid 0x15
[    1.110908] powernow-k8: fid 0x0 (800 MHz), vid 0x1e
[    1.110944] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-56 (2 cpu cores) (version 2.20.00)
[    1.110953] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.110955] EDD information not available.
[    1.212108] ACPI: Battery Slot [BAT1] (battery present)
[    1.214192] Freeing unused kernel memory: 1364K (ffffffff81d10000 - ffffffff81e65000)
[    1.214199] Write protecting the kernel read-only data: 12288k
[    1.218465] Freeing unused kernel memory: 1040K (ffff8800016fc000 - ffff880001800000)
[    1.221662] Freeing unused kernel memory: 836K (ffff880001b2f000 - ffff880001c00000)
[    1.246492] systemd-udevd[100]: starting version 204
[    1.270497] video: module verification failed: signature and/or required key missing - tainting kernel
[    1.270931] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    1.271073] acpi device:20: registered as cooling_device2
[    1.271097] ACPI: Video Device [IGPU] (multi-head: yes  rom: no  post: no)
[    1.271151] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input5
[    1.298823] ohci-pci: OHCI PCI platform driver
[    1.299048] ohci-pci 0000:00:0b.0: setting latency timer to 64
[    1.299053] ohci-pci 0000:00:0b.0: OHCI PCI host controller
[    1.299063] ohci-pci 0000:00:0b.0: new USB bus registered, assigned bus number 2
[    1.299108] ohci-pci 0000:00:0b.0: irq 23, io mem 0xfebde000
[    1.354063] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.354070] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.354074] usb usb2: Product: OHCI PCI host controller
[    1.354077] usb usb2: Manufacturer: Linux 3.11.0-12-generic ohci_hcd
[    1.354080] usb usb2: SerialNumber: 0000:00:0b.0
[    1.354259] hub 2-0:1.0: USB hub found
[    1.354269] hub 2-0:1.0: 8 ports detected
[    1.354531] pata_amd 0000:00:0d.0: version 0.4.1
[    1.354599] pata_amd 0000:00:0d.0: setting latency timer to 64
[    1.355020] scsi0 : pata_amd
[    1.355611] scsi1 : pata_amd
[    1.355984] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    1.355987] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    1.358072] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    1.358392] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
[    1.358422] forcedeth 0000:00:14.0: setting latency timer to 64
[    1.528346] ata1.01: ATAPI: Optiarc DVD RW AD-7530B, NX02, max UDMA/33
[    1.528357] ata1: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc00000) ACPI=0x701f (900:60:0x14)
[    1.544262] ata1.01: configured for UDMA/33
[    1.546235] scsi 0:0:1:0: CD-ROM            Optiarc  DVD RW AD-7530B  NX02 PQ: 0 ANSI: 5
[    1.553684] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.553688] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.553855] sr 0:0:1:0: Attached scsi CD-ROM sr0
[    1.553951] sr 0:0:1:0: Attached scsi generic sg0 type 5
[    1.880841] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1d:92:4c:ef:3b
[    1.880849] forcedeth 0000:00:14.0: highdma pwrctl lnktim desc-v3
[    1.881277] sata_nv 0000:00:0e.0: version 3.5
[    1.881610] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20
[    1.881636] sata_nv 0000:00:0e.0: Using SWNCQ mode
[    1.881697] sata_nv 0000:00:0e.0: setting latency timer to 64
[    1.882162] scsi2 : sata_nv
[    1.882292] scsi3 : sata_nv
[    1.882379] ata3: SATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe000 irq 20
[    1.882383] ata4: SATA max UDMA/133 cmd 0xe400 ctl 0xe080 bmdma 0xe008 irq 20
[    1.892046] usb 1-6: new high-speed USB device number 4 using ehci-pci
[    2.041473] usb 1-6: New USB device found, idVendor=148f, idProduct=5370
[    2.041480] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.041483] usb 1-6: Product: 802.11 n WLAN
[    2.041486] usb 1-6: Manufacturer: TPlink
[    2.041489] usb 1-6: SerialNumber: 1.0
[    2.152028] usb 1-8: new high-speed USB device number 5 using ehci-pci
[    2.348045] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.356328] ata3.00: ATA-7: ST980811AS,  3.ALY, max UDMA/133
[    2.356333] ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    2.372322] ata3.00: configured for UDMA/133
[    2.372528] scsi 2:0:0:0: Direct-Access     ATA      ST980811AS       n/a  PQ: 0 ANSI: 5
[    2.372822] sd 2:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    2.372898] sd 2:0:0:0: [sda] Write Protect is off
[    2.372903] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.372937] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.373341] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    2.423098] usb 1-8: New USB device found, idVendor=0db0, idProduct=6877
[    2.423104] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.423107] usb 1-8: Product: 802.11 bg WLAN
[    2.423110] usb 1-8: Manufacturer: Ralink
[    2.434237]  sda: sda1 sda2 sda3 sda4 < sda5 >
[    2.434842] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.684046] ata4: SATA link down (SStatus 0 SControl 300)
[    2.852033] usb 2-2: new full-speed USB device number 2 using ohci-pci
[    3.055073] usb 2-2: New USB device found, idVendor=0a12, idProduct=0001
[    3.055078] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.360030] usb 2-3: new full-speed USB device number 3 using ohci-pci
[    3.572073] usb 2-3: New USB device found, idVendor=09da, idProduct=054f
[    3.572080] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.572083] usb 2-3: Product: USB Device
[    3.572086] usb 2-3: Manufacturer: A4TECH
[    3.579917] hidraw: raw HID events driver (C) Jiri Kosina
[    3.594127] usbcore: registered new interface driver usbhid
[    3.594133] usbhid: USB HID core driver
[    3.598276] input: A4TECH USB Device as /devices/pci0000:00/0000:00:0b.0/usb2/2-3/2-3:1.0/input/input6
[    3.598766] hid-generic 0003:09DA:054F.0001: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:0b.0-3/input0
[    3.599325] input: A4TECH USB Device as /devices/pci0000:00/0000:00:0b.0/usb2/2-3/2-3:1.1/input/input7
[    3.599495] hid-generic 0003:09DA:054F.0002: input,hidraw1: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:0b.0-3/input1
[    5.257483] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    5.257490] vesafb: scrolling: redraw
[    5.257494] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    5.257509] mtrr: your BIOS has configured an incorrect mask, fixing it.
[    5.257511] mtrr: your BIOS has configured an incorrect mask, fixing it.
[    5.257513] mtrr: your BIOS has configured an incorrect mask, fixing it.
[    5.257515] mtrr: your BIOS has configured an incorrect mask, fixing it.
[    5.257994] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010400000, using 3072k, total 3072k
[    5.258195] Console: switching to colour frame buffer device 128x48
[    5.262895] fb0: VESA VGA frame buffer device
[    5.554409] EXT4-fs (sda5): INFO: recovery required on readonly filesystem
[    5.554416] EXT4-fs (sda5): write access will be enabled during recovery
[    8.976870] EXT4-fs (sda5): recovery complete
[    8.987855] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   11.618909] Adding 2929660k swap on /dev/sda3.  Priority:-1 extents:1 across:2929660k FS
[   12.953207] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   13.395151] systemd-udevd[304]: starting version 204
[   14.863624] lp: driver loaded but no devices found
[   15.793477] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   17.244133] MCE: In-kernel MCE decoding enabled.
[   17.257000] i2c i2c-0: nForce2 SMBus adapter at 0x5000
[   17.257042] i2c i2c-1: nForce2 SMBus adapter at 0x6000
[   17.275365] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[   17.398932] EDAC MC: Ver: 3.0.0
[   17.536353] AMD64 EDAC driver v3.4.0
[   17.536420] EDAC amd64: DRAM ECC disabled.
[   17.536444] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[   17.536444]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[   17.536444]  (Note that use of the override may cause unknown side effects.)
[   17.596476] nv_tco: NV TCO WatchDog Timer Driver v0.01
[   17.596644] nv_tco: Watchdog reboot not detected
[   17.596727] nv_tco: initialized (0x4440). heartbeat=30 sec (nowayout=0)
[   18.143717] Bluetooth: Core ver 2.16
[   18.143749] NET: Registered protocol family 31
[   18.143752] Bluetooth: HCI device and connection manager initialized
[   18.143765] Bluetooth: HCI socket layer initialized
[   18.143769] Bluetooth: L2CAP socket layer initialized
[   18.143776] Bluetooth: SCO socket layer initialized
[   18.380261] usbcore: registered new interface driver btusb
[   18.385040] microcode: AMD CPU family 0xf not supported
[   18.396659] microcode: AMD CPU family 0xf not supported
[   18.559627] psmouse serio2: synaptics: Touchpad model: 1, fw: 6.2, id: 0x11a0b1, caps: 0xa04753/0x200000/0x0, board id: 3655, fw id: 183235
[   18.589377] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input8
[   19.043677] kvm: Nested Virtualization enabled
[   19.605716] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 23
[   19.605727] hda_intel: Disabling MSI
[   19.605764] snd_hda_intel 0000:00:10.1: setting latency timer to 64
[   19.605769] hda-intel 0000:00:10.1: Disabling 64bit DMA
[   19.610156] hda-intel 0000:00:10.1: Enable delay in RIRB handling
[   19.960074] cfg80211: Calling CRDA to update world regulatory domain
[   20.772036] hda_codec: ALC883: SKU not ready 0x598301f0
[   20.812026] autoconfig: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:speaker
[   20.812032]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   20.812035]    hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
[   20.812037]    mono: mono_out=0x0
[   20.812038]    inputs:
[   20.812041]      Internal Mic=0x19
[   20.812043]      Mic=0x18
[   20.812045]      Line=0x1a
[   20.812048] realtek: No valid SSID, checking pincfg 0x598301f0 for NID 0x1d
[   20.812049] realtek: Enable default setup for auto mode as fallback
[   20.838914] type=1400 audit(1388311326.245:2): apparmor="STATUS" operation="profile_load" parent=419 profile="unconfined" name="/sbin/dhclient" pid=424 comm="apparmor_parser"
[   20.838928] type=1400 audit(1388311326.245:3): apparmor="STATUS" operation="profile_load" parent=419 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=424 comm="apparmor_parser"
[   20.838936] type=1400 audit(1388311326.245:4): apparmor="STATUS" operation="profile_load" parent=419 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=424 comm="apparmor_parser"
[   20.838961] type=1400 audit(1388311326.245:5): apparmor="STATUS" operation="profile_replace" parent=460 profile="unconfined" name="/sbin/dhclient" pid=461 comm="apparmor_parser"
[   20.838976] type=1400 audit(1388311326.245:6): apparmor="STATUS" operation="profile_replace" parent=460 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=461 comm="apparmor_parser"
[   20.838983] type=1400 audit(1388311326.245:7): apparmor="STATUS" operation="profile_replace" parent=460 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=461 comm="apparmor_parser"
[   20.839848] type=1400 audit(1388311326.245:8): apparmor="STATUS" operation="profile_replace" parent=419 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=424 comm="apparmor_parser"
[   20.839859] type=1400 audit(1388311326.245:9): apparmor="STATUS" operation="profile_replace" parent=419 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=424 comm="apparmor_parser"
[   20.839892] type=1400 audit(1388311326.245:10): apparmor="STATUS" operation="profile_replace" parent=460 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=461 comm="apparmor_parser"
[   20.839900] type=1400 audit(1388311326.245:11): apparmor="STATUS" operation="profile_replace" parent=460 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=461 comm="apparmor_parser"
[   20.904046] usb 1-8: reset high-speed USB device number 5 using ehci-pci
[   21.188051] usb 1-6: reset high-speed USB device number 4 using ehci-pci
[   21.331092] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
[   21.366223] ieee80211 phy0: rt2x00_set_chip: Info - Chipset detected - rt: 2573, rf: 0002, rev: 000a
[   21.378371] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 5370 detected
[   21.578598] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   21.579549] usbcore: registered new interface driver rt73usb
[   21.580314] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[   21.580799] usbcore: registered new interface driver rt2800usb
[   22.223772] nvidia: module license 'NVIDIA' taints kernel.
[   22.223781] Disabling lock debugging due to kernel taint
[   22.521127] cfg80211: World regulatory domain updated:
[   22.521136] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   22.521139] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   22.521142] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   22.521145] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   22.521148] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   22.521150] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   22.528619] input: HDA NVidia Headphone as /devices/pci0000:00/0000:00:10.1/sound/card0/input9
[   22.529500] input: HDA NVidia Line as /devices/pci0000:00/0000:00:10.1/sound/card0/input10
[   22.529939] input: HDA NVidia Mic as /devices/pci0000:00/0000:00:10.1/sound/card0/input11
[   22.537840] ACPI: PCI Interrupt Link [LNEC] enabled at IRQ 19
[   22.537880] nvidia 0000:00:05.0: setting latency timer to 64
[   22.537886] vgaarb: device changed decodes: PCI:0000:00:05.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   22.542009] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  304.117  Tue Nov 26 21:25:36 PST 2013
[   22.544428] init: failsafe main process (496) killed by TERM signal
[   26.265767] Bluetooth: RFCOMM TTY layer initialized
[   26.265788] Bluetooth: RFCOMM socket layer initialized
[   26.265791] Bluetooth: RFCOMM ver 1.11
[   26.365600] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   26.365608] Bluetooth: BNEP filters: protocol multicast
[   26.365709] Bluetooth: BNEP socket layer initialized
[   26.944304] init: avahi-cups-reload main process (745) terminated with status 1
[   27.353813] ppdev: user-space parallel port driver
[   29.009531] audit_printk_skb: 99 callbacks suppressed
[   29.009539] type=1400 audit(1388311334.417:45): apparmor="STATUS" operation="profile_replace" parent=773 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=871 comm="apparmor_parser"
[   29.009556] type=1400 audit(1388311334.417:46): apparmor="STATUS" operation="profile_replace" parent=773 profile="unconfined" name="/usr/sbin/cupsd" pid=871 comm="apparmor_parser"
[   29.010607] type=1400 audit(1388311334.417:47): apparmor="STATUS" operation="profile_replace" parent=773 profile="unconfined" name="/usr/sbin/cupsd" pid=871 comm="apparmor_parser"
[   33.176374] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[   33.178509] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   39.409471] NVRM: Your system is not currently configured to drive a VGA console
[   39.409477] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[   39.409481] NVRM: requires the use of a text-mode VGA console. Use of other console
[   39.409483] NVRM: drivers including, but not limited to, vesafb, may result in
[   39.409485] NVRM: corruption and stability problems, and is not supported.


root@alpman-kubuntu:~# dmesg | tail
[   29.009539] type=1400 audit(1388311334.417:45): apparmor="STATUS" operation="profile_replace" parent=773 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=871 comm="apparmor_parser"
[   29.009556] type=1400 audit(1388311334.417:46): apparmor="STATUS" operation="profile_replace" parent=773 profile="unconfined" name="/usr/sbin/cupsd" pid=871 comm="apparmor_parser"
[   29.010607] type=1400 audit(1388311334.417:47): apparmor="STATUS" operation="profile_replace" parent=773 profile="unconfined" name="/usr/sbin/cupsd" pid=871 comm="apparmor_parser"
[   33.176374] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[   33.178509] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   39.409471] NVRM: Your system is not currently configured to drive a VGA console
[   39.409477] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[   39.409481] NVRM: requires the use of a text-mode VGA console. Use of other console
[   39.409483] NVRM: drivers including, but not limited to, vesafb, may result in
[   39.409485] NVRM: corruption and stability problems, and is not supported.



Not : Şu an internete ethernet kablosu ile bağlanmaktayım...

Teşekkürler...

heartsmagic

Kablosuz ağ donanımsal olarak kapalı görünüyor. Makinenin üzerinde herhangi bir donanımsal anahtar var mı? Veya tuş kombinasyonu ile açıp kapatılan bir yer?
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?


Böylece yalan, dünyanın düzenine dönüştürülüyor.

adilalpman

#4
 Cihazın kendi on board chip i problem yaratmış en son ekran kartı için gittiği servis onarımı sırasında...

Bu nedenle cihaz şu an belirttiğim TP-LINK in TL-WN727N cihazı usb den takılı durumda...

Yani onboard wireless chip ini kullanmıyorum...

heartsmagic

Anladım, iki arayüz için de kapalı diyor ilginç.

sudo ifconfig wlan1 up

ne diyor?
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?


Böylece yalan, dünyanın düzenine dönüştürülüyor.


adilalpman


Bunu denedim ama durum hala çözümsüz... :(

root@alpman-kubuntu:~# rfkill list
0: hci0: Bluetooth
        Soft blocked: no                                                                                                                                     
        Hard blocked: no                                                                                                                                     
1: phy1: Wireless LAN                                                                                                                                       
        Soft blocked: no                                                                                                                                     
        Hard blocked: no                                                                                                                                     
2: phy0: Wireless LAN                                                                                                                                       
        Soft blocked: no                                                                                                                                     
        Hard blocked: yes                                                                                                                                   
root@alpman-kubuntu:~# ifconfig wlan1 up                                                                                                                     
root@alpman-kubuntu:~# ping google.com
ping: unknown host google.com                                                                                                                               
root@alpman-kubuntu:~# lsusb
Bus 001 Device 005: ID 0db0:6877 Micro Star International RT2573
Bus 001 Device 002: ID 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 003: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
Bus 002 Device 002: ID 09da:054f A4 Tech Co., Ltd
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
root@alpman-kubuntu:~# echo 'install rt2800usb modprobe --ignore-install rt2800usb ; /bin/echo "148f 5370" > /sys/bus/usb/drivers/rt2800usb/new_id' | sudo tee /etc/modprobe.d/rt2800usb.conf
install rt2800usb modprobe --ignore-install rt2800usb ; /bin/echo "148f 5370" > /sys/bus/usb/drivers/rt2800usb/new_id
root@alpman-kubuntu:~# echo 'install rt2800usb modprobe --ignore-install rt2800usb ; /bin/echo "148f 5370" > /sys/bus/usb/drivers/rt2800usb/new_id' | sudo tee /etc/modprobe.d/rt2800usb.conf                                                                                                                             
install rt2800usb modprobe --ignore-install rt2800usb ; /bin/echo "148f 5370" > /sys/bus/usb/drivers/rt2800usb/new_id                                       
root@alpman-kubuntu:~# modprobe -v rt2800usb
root@alpman-kubuntu:~#


Bunun ardından pc yi restart ettim ancak hala saatin yanındaki kablolu ağ ikonuna tıkladığımda oradaki "Network Enabled" Checkbox u disable ve Enable edilmesi de imkansız şekilde koyu gri... :(

if

@adilalpman, echo 'install rt2800usb modprobe --ignore-install rt2800usb ; /bin/echo "148f 5370" > /sys/bus/usb/drivers/rt2800usb/new_id' | sudo tee /etc/modprobe.d/rt2800usb.conf
sudo modprobe -v rt2800usb
komutları ardından bağlanabiliyor musunuz?

Olmazsa aşağıdakini deneyeceğiz.

cd /etc/udev/rules.d
sudo -H gedit 95-rt5370-usb.rules
dosyasının içine SUBSYSTEM=="usb", ATTR{idVendor}=="148f", ATTR{idProduct}=="5370", RUN+="/etc/udev/rules.d/rt5370-usb.sh" yazıp kaydedin. Ardından sudo -H gedit rt5370-usb.sh dosyası içine #!/bin/sh modprobe rt2800usb
echo 148F 5370 > /sys/bus/usb/drivers/rt2800usb/new_id
yazıp kaydedin. Sonra sudo -H gedit 70-persistent-net.rules içinde bulunan # -- identification via driver # USB device 0x148f:0x5370 (usb) #SUBSYSTEM=="net", ACTION=="add", DRIVERS=="rt2800usb", satırı sonrası gelen satırın yerine ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan0", RUN+="/etc/udev/rules.d/rt5370-net.sh"  yazıp kaydedin. Son olarak sudo -H gedit rt5370-net.sh dosyası içine #!/bin/sh # change the orig MAC to another, if you like

if test -f /tmp/mac; then read MAC < /tmp/mac; fi ifconfig wlan0 hw ether $MAC
yazıp kaydedin.

adilalpman


Valla açıkçası galiba ilk komut dizisinin ardından galiba birşeyler oluyor zira tx-power da 20 dbm gibi bir değer görüyorum ama ne hikmetse hala donanımın altındaki yeşil ışık findovz altında çalışırkenki gibi yanar hale gelmiyor... :(

root@alpman-kubuntu:/etc/udev/rules.d# echo 'install rt2800usb modprobe --ignore-install rt2800usb ; /bin/echo "148f 5370" > /sys/bus/usb/drivers/rt2800usb/new_id' | sudo tee /etc/modprobe.d/rt2800usb.conf
install rt2800usb modprobe --ignore-install rt2800usb ; /bin/echo "148f 5370" > /sys/bus/usb/drivers/rt2800usb/new_id
root@alpman-kubuntu:/etc/udev/rules.d# ping google.com
ping: unknown host google.com
root@alpman-kubuntu:/etc/udev/rules.d# sudo modprobe -v rt2800usb
root@alpman-kubuntu:/etc/udev/rules.d# ifconfig wlan1 up
root@alpman-kubuntu:/etc/udev/rules.d# ping google.com
ping: unknown host google.com
root@alpman-kubuntu:/etc/udev/rules.d# iwscan
iwscan: command not found
root@alpman-kubuntu:/etc/udev/rules.d# iwconfig
ham0      no wireless extensions.

wlan1     IEEE 802.11bgn  ESSID:off/any 
          Mode:Managed  Access Point: Not-Associated   Tx-Power=20 dBm   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:on
         
eth0      no wireless extensions.

lo        no wireless extensions.

wlan0     IEEE 802.11bg  ESSID:off/any 
          Mode:Managed  Access Point: Not-Associated   Tx-Power=off   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:on


Siz uzmanlar olarak; "yok, bu olmamış" diyorsanız ikinci uzun seçeneğe geçeyim, gerçi onu da denedim daha önce ve sanırım o da olmadı ama... :(

if

cat /etc/modprobe.d/rt2800usb.conf
cat /etc/udev/rules.d/95-rt5370-usb.rules
cat /etc/udev/rules.d/rt5370-usb.sh
cat /etc/udev/rules.d/70-persistent-net.rules
cat /etc/udev/rules.d/rt5370-net.sh
içeriklerini görelim.

adilalpman

#11
 Şu an kullandığım tp-link donanımı sanırım wlan0 değil wlan1 olarak geçmekte o nedenle dosyalardaki değerleri wlan0 değil wlan1 olarak ayarladım ama yanlışsam düzeltin lütfen...

İstenilen dosyaların içerikleri aşağıda...

Yaptığınız ve yapacağınız tüm yardımlar için teşekkürler...

root@alpman-kubuntu:/etc/udev/rules.d# cat /etc/modprobe.d/rt2800usb.conf
install rt2800usb modprobe --ignore-install rt2800usb ; /bin/echo "148f 5370" > /sys/bus/usb/drivers/rt2800usb/new_id
root@alpman-kubuntu:/etc/udev/rules.d#


root@alpman-kubuntu:/etc/udev/rules.d# cat /etc/udev/rules.d/95-rt5370-usb.rules
SUBSYSTEM=="usb", ATTR{idVendor}=="148f", ATTR{idProduct}=="5370", RUN+="/etc/udev/rules.d/rt5370-usb.sh"
root@alpman-kubuntu:/etc/udev/rules.d#


root@alpman-kubuntu:/etc/udev/rules.d# cat /etc/udev/rules.d/rt5370-usb.sh
#!/bin/sh modprobe rt2800usb

echo 148F 5370 > /sys/bus/usb/drivers/rt2800usb/new_id
root@alpman-kubuntu:/etc/udev/rules.d#


root@alpman-kubuntu:/etc/udev/rules.d# cat /etc/udev/rules.d/70-persistent-net.rules
# -- identification via driver # USB device 0x148f:0x5370 (usb) #SUBSYSTEM=="net", ACTION=="add", DRIVERS=="rt2800usb",
#ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan0", RUN+="/etc/udev/rules.d/rt5370-net.sh"
ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan1", RUN+="/etc/udev/rules.d/rt5370-net.sh"

# -- identification via origATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan0", RUN+="/etc/udev/rules.d/rt5370-net.sh"
MAC (more standard way) # USB device 0x148f:0x5370 (usb) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*",root@alpman-kubuntu:/etc/udev/rules.d#
root@alpman-kubuntu:/etc/udev/rules.d#


root@alpman-kubuntu:/etc/udev/rules.d# cat /etc/udev/rules.d/rt5370-net.sh
#!/bin/sh # change the orig MAC to another, if you like

if test -f /tmp/mac; then read MAC < /tmp/mac; fi ifconfig wlan1 hw ether $MAC
root@alpman-kubuntu:/etc/udev/rules.d#



Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 08 Ocak 2014 - 20:07:29


Tüm bu ayarlardan sonra konsoldan iwconfig komutunda ve gui Network Managerda rename3 adıyla bir device daha oluştu, usb donanımı bir daha taktım çıkardım bu defa da rename3 gitti, rename6 diye bir device geldi... :)

Anlamadım... :(

if

sudo rfkill unblock all komutundan sonra bir gelişme var mı? Bu aygıtın pin'i var mı?

adilalpman



Sözkonusu komutu verdim, aygıtı takıp tekrar çkardım ancak raname den sonraki sayı değişiyor ama iwconfig komutundan sonra Tx-Power=  komutundan sonra önceden bir değer görüyordum ancak şu an o da yok... :(

Network Manager (gui) da neyi nasıl seçmeliyim? Mode u infsracructure olarak bırakıyorum bu doğru mu?

Ya da Network manager yerine wicd kursam işim daha mı kolay olur...

Gerçi donanım bazında bir sorunumuz var iken yazılımı değiştirsem ne değişir o da ayrı konu ya... :((




if

BIOS'tan kablosuz aygıtları açabiliyor musunuz? Donanımsal olarak kapalı görünmesine bir çare bulmalıyız.

adilalpman


Sözkonusu aygıt MSI VR330 laptopta ve laptopun dahili wireless chip i problemli olduğundan dıştan takılan tp link usb wireless...

Dolayısıyla bu donanıma bios tan müdahale imkansız zira cihaz usb... :(

Gerçi cihazın dahili wireless ini da usb den disable etmedim, onu da bios üzerinde aradım ancak öyle bir ayar bulamadım...

Teşekkürler...

if

#16
sudo modprobe -v rt2800usb
sudo rfkill unblock all
sudo rfkill list
çıktılarına bakayım.

Bir de ls /lib/firmware/* | grep rt

adilalpman

root@alpman-kubuntu:~# modprobe -v rt2800usb
root@alpman-kubuntu:~#


root@alpman-kubuntu:~# sudo rfkill unblock all
root@alpman-kubuntu:~#


root@alpman-kubuntu:~# sudo rfkill list
0: hci0: Bluetooth
        Soft blocked: no
        Hard blocked: no
2: phy0: Wireless LAN
        Soft blocked: no
        Hard blocked: yes
5: phy4: Wireless LAN
        Soft blocked: no
        Hard blocked: no
root@alpman-kubuntu:~#


root@alpman-kubuntu:~# ls /lib/firmware/* | grep rt
/lib/firmware/rt2561.bin
/lib/firmware/rt2561s.bin
/lib/firmware/rt2661.bin
/lib/firmware/rt2860.bin
/lib/firmware/rt2870.bin
/lib/firmware/rt3070.bin
/lib/firmware/rt3090.bin
/lib/firmware/rt3290.bin
/lib/firmware/rt73.bin
/lib/firmware/edgeport:
wis-startrek.fw
/lib/firmware/libertas:
/lib/firmware/rtl_nic:
rtl8105e-1.fw
rtl8106e-1.fw
rtl8106e-2.fw
rtl8168d-1.fw
rtl8168d-2.fw
rtl8168e-1.fw
rtl8168e-2.fw
rtl8168e-3.fw
rtl8168f-1.fw
rtl8168f-2.fw
rtl8168g-1.fw
rtl8168g-2.fw
rtl8168g-3.fw
rtl8402-1.fw
rtl8411-1.fw
rtl8411-2.fw
/lib/firmware/rtlwifi:
rtl8188efw.bin
rtl8192cfw.bin
rtl8192cfwU_B.bin
rtl8192cfwU.bin
rtl8192cufw.bin
rtl8192defw.bin
rtl8192sefw.bin
rtl8712u.bin
rtl8723fw_B.bin
rtl8723fw.bin
root@alpman-kubuntu:~#





if

Üzerindeki kilit açılmış ama değişiklik yok. Şimdi sudo modprobe -r rt73usb sürücünü engelleyelim. Bu komut ardından bağlanabiliyor musunuz?

Sistemi root olarak kullanmanızı gerektiren bir durum yok, o yüzden kullanmamanızı tavsiye ederim.

adilalpman

 Öncelikle değerli "if" başta olmak üzere hem "if" hem de "heartsmagic" nickli arkadaşlara bu konudaki yardımları için çok teşekkür ediyorum...

Ancak, ne zamandır ömrünün sonuna yaklaşma belirtileri veren MSI VR330 Laptop umu dün kaybettik... (öldü yani) :(  :'( :)

Dolayısıyla bu konuyu da artı ksürdürmenin bir anlamı kalmadı ama tabii her sorun bizlere bir deneyim kazandırıyor ki bu da öyle oldu...

Bu akşam onun yerine bir adet paylaşımsız, nvidia ekran kartlı toshiba laptop almak durumunda kaldım...

Ürünü alırken de linux kullanımını dikkate alarak özellikle nvidia ekran kartını ve intel chipset ini seçtim...

Yeni maceralarda görüşmek üzere, tekrar çok çok teşekkürler... :)


heartsmagic

Hayırlı olsun diyor, keşke çözebilseydik diye de ekliyorum :) Ancak sağlık olsun, yeni bir makine almışsın hayırlı uğurlu olsun. Konuyu etiketlemeden kapatalım.
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?


Böylece yalan, dünyanın düzenine dönüştürülüyor.