[Çözüldü] Kablosuz Adaptör sorunu.

Başlatan Salvo, 06 Şubat 2013 - 19:25:25

« önceki - sonraki »

0 Üyeler ve 1 Ziyaretçi konuyu incelemekte.

Yazdır
Aşağı git Sayfa1
Kullanıcı Eylemleri

Salvo

06 Şubat 2013 - 19:25:25 Son düzenlenme: 17 Şubat 2013 - 22:45:45 if
Arkadaşlar öncelikle herkese merhaba,aranıza yeni katıldım.İlk kez linux dağıtımına geçiş yaptım.İzlenimlerim oldukça olumlu lakin donanımsal problemlerden dolayı canım sıkılmıyor değil. Sorunlardan bahsetmek gerekirse, kablosuz bağlantı yaptığım dahili wireless adaptör ile internete bağlanmak bir yük,0.50 kbps gibi bir hıza ulaşıyor maksimum.İnternet sitelerine girmekte zorlanıyorum.Elimde olan harici wireless adaptörü bağladım bilgisayara, ondan bağlandım internete ve gayet *kararlı bir bağlantı yaşadım.Bu da bende doğal olarak donanım yazılımında bir problem olduğu izlenimi doğurdu.Kullandığım harici adaptörün sürücüsü rtl8187 ve *kararlı çalışmakta,dahili adaptör ise rtl8191seva sürücüsünü yüklemiş.Sizden ricam ne gibi adımlar izlemeliyim,dahili adaptörün marka ve modelini ne şekilde öğrenebilirim.Bir de ek olarak youtube vb sitelerde bir süre işlem yapılmazsa bilgisayar ekranı kararmakta ve oturum kapanmakta.Kısacası bilgisayar youtube vb video paylaşım sitelerinde video izlerken uyku moduna geçmekte.
Şimdiden yardımlarınız için teşekkür ederim,iyi forumlar. :)

burk

#1
06 Şubat 2013 - 23:59:21
@Salvo öncelikle aramıza hoş gelidiniz.

Öncelikle forum kuralları gereği her konu altında bir sorun konuşmayı istiyoruz, şu durumda yaşadığınız sorunlardan ağ ile ilgili olan daha büyük öncelik taşıyor. Bu sebeple şu çıktıları buraya geçin; http://forum.ubuntu-tr.net/index.php?topic=28764.0

Forumda ekran kartı ile ilgili konular var, önce onları araştırın, bulamazsanız ilgili bölüm altına yeni bir konu açın lütfen.

Salvo

#2
07 Şubat 2013 - 20:43:09 Son düzenlenme: 08 Şubat 2013 - 16:10:32 Salvo
cat /etc/lsb-release  çıktısı
Kod Seç
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=12.10
DISTRIB_CODENAME=quantal
DISTRIB_DESCRIPTION="Ubuntu 12.10"

uname -a çıktısı
Kod Seç
Linux Zion 3.5.0-23-generic #35-Ubuntu SMP Thu Jan 24 13:05:29 UTC 2013 i686 i686 i686 GNU/Linux

lspci
Kod Seç
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvA Wireless LAN Controller (rev 10)
ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)

lsusb çıktısı
Kod Seç
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0c45:6409 Microdia Webcam
Bus 002 Device 009: ID 0bda:8187 Realtek Semiconductor Corp. RTL8187 Wireless Adapter
Bus 002 Device 007: ID 1a2c:0023 
Bus 002 Device 008: ID 046d:c016 Logitech, Inc. Optical Wheel Mouse

rfkill list çıktısı
Kod Seç
0: hp-wifi: Wireless LAN
Soft blocked: no
Hard blocked: no
1: hp-bluetooth: Bluetooth
Soft blocked: no
Hard blocked: no
2: hp-wwan: Wireless WAN
Soft blocked: no
Hard blocked: no
3: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
5: phy2: Wireless LAN
Soft blocked: no
Hard blocked: no

sudo lshw -C network çıktısı
Kod Seç
*-network               
       açıklama: Eternet interface
       ürün: RTL8111/8168B PCI Express Gigabit Ethernet controller
       üretici: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:01:00.0
       mantıksal ad: eth0
       sürüm: 06
       serial: 1c:75:08:d1:47:d2
       boyut: 10Mbit/s
       kapasite: 1Gbit/s
       genişlik: 64 bits
       saat: 33MHz
       kapasiteler: pm msi pciexpress msix vpd bus_master cap_list eternet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
       yapılandırma: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl_nic/rtl8168e-2.fw latency=0 link=no multicast=yes port=MII speed=10Mbit/s
       kaynaklar: irq:41 ioport:3000(boyut=256) bellek:90404000-90404fff bellek:90400000-90403fff
  *-network
       açıklama: Kablosuz arayüz
       ürün: RTL8191SEvA Wireless LAN Controller
       üretici: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:02:00.0
       mantıksal ad: wlan0
       sürüm: 10
       serial: 7c:4f:b5:2d:21:97
       genişlik: 32 bits
       saat: 33MHz
       kapasiteler: pm msi pciexpress bus_master cap_list eternet physical wireless
       yapılandırma: broadcast=yes driver=rtl8192se driverversion=3.5.0-23-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn
       kaynaklar: irq:17 ioport:2000(boyut=256) bellek:92400000-92403fff
  *-network
       açıklama: Kablosuz arayüz
       physical id: 2
       bus info: usb@2:1.1
       mantıksal ad: wlan1
       serial: 00:0f:04:b1:0a:bc
       kapasiteler: eternet physical wireless
       yapılandırma: broadcast=yes driver=rtl8187 driverversion=3.5.0-23-generic firmware=N/A ip=192.168.2.24 link=yes multicast=yes wireless=IEEE 802.11bg

ifconfig çıktısı
Kod Seç
eth0      Link encap:Ethernet  HWaddr 1c:75:08:d1:47:d2 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Sunucu
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:4674 errors:0 dropped:0 overruns:0 frame:0
          TX packets:4674 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:662221 (662.2 KB)  TX bytes:662221 (662.2 KB)

wlan0     Link encap:Ethernet  HWaddr 7c:4f:b5:2d:21:97 
          inet6 addr: fe80::7e4f:b5ff:fe2d:2197/64 Scope:Link
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:118 errors:0 dropped:0 overruns:0 frame:0
          TX packets:111 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:57626 (57.6 KB)  TX bytes:16726 (16.7 KB)

wlan1     Link encap:Ethernet  HWaddr 00:0f:04:b1:0a:bc 
          inet addr:192.168.2.24  Bcast:192.168.2.255  Mask:255.255.255.0
          inet6 addr: fe80::20f:4ff:feb1:abc/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:223493 errors:0 dropped:0 overruns:0 frame:0
          TX packets:190910 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:239560914 (239.5 MB)  TX bytes:127357785 (127.3 MB)

iwconfig çıktısı
Kod Seç
wlan0     IEEE 802.11bgn  ESSID:off/any 
          Mode:Managed  Access Point: Not-Associated   Tx-Power=20 dBm   
          Retry  long limit:7   RTS thr=2347 B   Fragment thr:off
          Power Management:off
         
lo        no wireless extensions.

eth0      no wireless extensions.

wlan1     IEEE 802.11bg  ESSID:"YAGCILAR" 
          Mode:Managed  Frequency:2.462 GHz  Access Point: 00:1C:A8:81:E7:B4   
          Bit Rate=54 Mb/s   Tx-Power=20 dBm   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Power Management:off
          Link Quality=60/70  Signal level=-50 dBm 
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:1653  Invalid misc:7423   Missed beacon:0

iwlist scanning çıktısı
Kod Seç
wlan0     Scan completed :
          Cell 01 - Address: 00:1C:A8:DE:F9:93
                    Channel:6
                    Frequency:2.437 GHz (Channel 6)
                    Quality=49/70  Signal level=-61 dBm 
                    Encryption key:on
                    ESSID:"YAGCILAR2"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
                              24 Mb/s; 36 Mb/s; 54 Mb/s
                    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
                    Mode:Master
                    Extra:tsf=000000281b9401a7
                    Extra: Last beacon: 5964ms ago
                    IE: Unknown: 000959414743494C415232
                    IE: Unknown: 010882848B962430486C
                    IE: Unknown: 030106
                    IE: Unknown: 2A0100
                    IE: Unknown: 2F0100
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : CCMP TKIP
                        Authentication Suites (1) : PSK
                    IE: Unknown: 32040C121860
                    IE: Unknown: DD09001018020100000000
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : CCMP TKIP
                        Authentication Suites (1) : PSK
          Cell 02 - Address: 00:1C:A8:81:E7:B4
                    Channel:11
                    Frequency:2.462 GHz (Channel 11)
                    Quality=49/70  Signal level=-61 dBm 
                    Encryption key:on
                    ESSID:"YAGCILAR"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
                              11 Mb/s; 12 Mb/s; 18 Mb/s
                    Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=000000018c57d12e
                    Extra: Last beacon: 5628ms ago
                    IE: Unknown: 000859414743494C4152
                    IE: Unknown: 010882848B0C12961824
                    IE: Unknown: 03010B
                    IE: Unknown: 200100
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : CCMP TKIP
                        Authentication Suites (1) : PSK
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : CCMP TKIP
                        Authentication Suites (1) : PSK
                    IE: Unknown: 2A0103
                    IE: Unknown: 32043048606C
                    IE: Unknown: DD180050F2020101060003A4000027A4000042435E0062322F00
                    IE: Unknown: DD0900037F01010000FF7F
                    IE: Unknown: DD0A00037F04010000000000
                    IE: Unknown: 07064E4120010E14
          Cell 03 - Address: 98:0C:82:AD:70:39
                    Channel:6
                    Frequency:2.437 GHz (Channel 6)
                    Quality=49/70  Signal level=-61 dBm 
                    Encryption key:on
                    ESSID:"AndroidAP"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
                              24 Mb/s; 36 Mb/s; 54 Mb/s
                    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
                    Mode:Master
                    Extra:tsf=0000000576ffc214
                    Extra: Last beacon: 6100ms ago
                    IE: Unknown: 0009416E64726F69644150
                    IE: Unknown: 010882848B962430486C
                    IE: Unknown: 030106
                    IE: Unknown: 050400030000
                    IE: Unknown: 2A0100
                    IE: Unknown: 2F0100
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : CCMP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                    IE: Unknown: 32040C121860
                    IE: Unknown: 2D1A0C1019FF00000000000000000000000000000000000000000000
                    IE: Unknown: 3D1606081100000000000000000000000000000000000000
                    IE: Unknown: DD09001018020000000000

lo        Interface doesn't support scanning.

eth0      Interface doesn't support scanning.

wlan1     Scan completed :
          Cell 01 - Address: 00:1C:A8:81:E7:B4
                    Channel:11
                    Frequency:2.462 GHz (Channel 11)
                    Quality=63/70  Signal level=-47 dBm 
                    Encryption key:on
                    ESSID:"YAGCILAR"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
                              11 Mb/s; 12 Mb/s; 18 Mb/s
                    Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=000000018bb116b8
                    Extra: Last beacon: 16724ms ago
                    IE: Unknown: 000859414743494C4152
                    IE: Unknown: 010882848B0C12961824
                    IE: Unknown: 03010B
                    IE: Unknown: 200100
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : CCMP TKIP
                        Authentication Suites (1) : PSK
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : CCMP TKIP
                        Authentication Suites (1) : PSK
                    IE: Unknown: 2A0103
                    IE: Unknown: 32043048606C
                    IE: Unknown: DD180050F2020101060003A4000027A4000042435E0062322F00
                    IE: Unknown: DD0900037F01010000FF7F
                    IE: Unknown: DD0A00037F04010000000000
                    IE: Unknown: 07064E4120010E14
          Cell 02 - Address: 00:1C:A8:DE:F9:93
                    Channel:6
                    Frequency:2.437 GHz (Channel 6)
                    Quality=39/70  Signal level=-71 dBm 
                    Encryption key:on
                    ESSID:"YAGCILAR2"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
                              24 Mb/s; 36 Mb/s; 54 Mb/s
                    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
                    Mode:Master
                    Extra:tsf=000000281add45ef
                    Extra: Last beacon: 17944ms ago
                    IE: Unknown: 000959414743494C415232
                    IE: Unknown: 010882848B962430486C
                    IE: Unknown: 030106
                    IE: Unknown: 2A0100
                    IE: Unknown: 2F0100
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : CCMP TKIP
                        Authentication Suites (1) : PSK
                    IE: Unknown: 32040C121860
                    IE: Unknown: DD09001018020100000000
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : CCMP TKIP
                        Authentication Suites (1) : PSK
lsmod çıktısı
Kod Seç
Module                  Size  Used by
parport_pc             31969  0
ppdev                  12818  0
bnep                   17708  2
rfcomm                 37277  0
bluetooth             183270  10 bnep,rfcomm
binfmt_misc            17261  1
joydev                 17162  0
snd_hda_codec_hdmi     31457  1
snd_hda_codec_realtek    63496  1
coretemp               13169  0
kvm_intel             126746  0
kvm                   357807  1 kvm_intel
arc4                   12474  4
snd_hda_intel          32516  5
snd_hda_codec         111548  3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep              13273  1 snd_hda_codec
snd_pcm                80235  4 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
psmouse                84878  0
snd_seq_midi           13133  0
microcode              18210  0
snd_rawmidi            25383  1 snd_seq_midi
snd_seq_midi_event     14476  1 snd_seq_midi
snd_seq                51281  2 snd_seq_midi,snd_seq_midi_event
snd_timer              24412  2 snd_pcm,snd_seq
snd_seq_device         14138  3 snd_seq_midi,snd_rawmidi,snd_seq
snd                    62146  19 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore              14600  1 snd
snd_page_alloc         14037  2 snd_hda_intel,snd_pcm
rtl8187                56225  0
eeprom_93cx6           13169  1 rtl8187
uvcvideo               71278  0
videobuf2_core         32071  1 uvcvideo
videodev               95842  2 uvcvideo,videobuf2_core
lpc_ich                16926  0
videobuf2_vmalloc      12757  1 uvcvideo
videobuf2_memops       13213  1 videobuf2_vmalloc
serio_raw              13032  0
intel_ips              17884  0
i915                  457247  8
rtl8192se              62269  0
drm_kms_helper         47304  1 i915
rtlwifi                64173  1 rtl8192se
drm                   238811  4 i915,drm_kms_helper
i2c_algo_bit           13198  1 i915
mei                    35797  0
hp_wmi                 13617  0
sparse_keymap          13659  1 hp_wmi
mxm_wmi                12894  0
video                  18848  1 i915
wmi                    18591  2 hp_wmi,mxm_wmi
b43                   347311  0
mac80211              461203  4 rtl8187,rtl8192se,rtlwifi,b43
cfg80211              175574  4 rtl8187,rtlwifi,b43,mac80211
bcma                   34484  1 b43
ssb                    50088  1 b43
mac_hid                13038  0
lp                     13300  0
parport                40754  3 parport_pc,ppdev,lp
hid_generic            12485  0
usbhid                 41734  0
hid                    82179  2 hid_generic,usbhid
ums_realtek            17670  0
uas                    17557  0
r8169                  55977  0
usb_storage            39351  1 ums_realtek
dmesg çıktısı
Kod Seç
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.5.0-23-generic (buildd@aatxe) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #35-Ubuntu SMP Thu Jan 24 13:05:29 UTC 2013 (Ubuntu 3.5.0-23.35-generic 3.5.7.2)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006f63efff] usable
[    0.000000] BIOS-e820: [mem 0x000000006f63f000-0x000000006f6befff] reserved
[    0.000000] BIOS-e820: [mem 0x000000006f6bf000-0x000000006f7befff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000006f7bf000-0x000000006f7fefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000006f7ff000-0x000000006f7fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000006f800000-0x000000007bffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.6 present.
[    0.000000] DMI: ARCELIK A.S. 1E7-GNB 1455A1I3/1E7-GNB 1455A1I3, BIOS F.0D 01/10/2011
[    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x6f800 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-combining
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 base 0FFE00000 mask FFFE00000 write-protect
[    0.000000]   2 base 040000000 mask FC0000000 write-back
[    0.000000]   3 base 070000000 mask FF0000000 uncachable
[    0.000000]   4 base 06F800000 mask FFF800000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[    0.000000] Base memory trampoline at [c0099000] 99000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x37bfdfff]
[    0.000000]  [mem 0x00000000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x379fffff] page 2M
[    0.000000]  [mem 0x37a00000-0x37bfdfff] page 4k
[    0.000000] kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff]
[    0.000000] RAMDISK: [mem 0x36330000-0x3718ffff]
[    0.000000] ACPI: RSDP 000fe020 00024 (v02 BEKOPC)
[    0.000000] ACPI: XSDT 6f7fe120 0007C (v01 BEKOPC ARCELIK1 00000001      01000013)
[    0.000000] ACPI: FACP 6f7fc000 000F4 (v04 BEKOPC ARCELIK1 00000001 MSFT 01000013)
[    0.000000] ACPI: DSDT 6f7e8000 10932 (v02 BEKOPC ARCELIK1 00000001 MSFT 01000013)
[    0.000000] ACPI: FACS 6f75f000 00040
[    0.000000] ACPI: ASF! 6f7fd000 000A5 (v32 BEKOPC ARCELIK1 00000001 MSFT 01000013)
[    0.000000] ACPI: HPET 6f7fb000 00038 (v01 BEKOPC ARCELIK1 00000001 MSFT 01000013)
[    0.000000] ACPI: APIC 6f7fa000 000BC (v02 BEKOPC ARCELIK1 00000001 MSFT 01000013)
[    0.000000] ACPI: MCFG 6f7f9000 0003C (v01 BEKOPC ARCELIK1 00000001 MSFT 01000013)
[    0.000000] ACPI: SLIC 6f7e7000 00176 (v01 BEKOPC ARCELIK1 00000001 MSFT 01000013)
[    0.000000] ACPI: BOOT 6f7e4000 00028 (v01 BEKOPC ARCELIK1 00000001 MSFT 01000013)
[    0.000000] ACPI: SSDT 6f7e3000 002E0 (v01 INTEL  SataAhci 00001000 INTL 20051117)
[    0.000000] ACPI: ASPT 6f7df000 00034 (v04 BEKOPC ARCELIK1 00000001 MSFT 01000013)
[    0.000000] ACPI: WDRT 6f7de000 00047 (v01 BEKOPC ARCELIK1 00000000 MSFT 01000013)
[    0.000000] ACPI: SSDT 6f7dd000 009F1 (v01  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 892MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37bfe000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x37bfdfff]
[    0.000000]   HighMem  [mem 0x37bfe000-0x6f7fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00010000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0x6f63efff]
[    0.000000]   node   0: [mem 0x6f7ff000-0x6f7fffff]
[    0.000000] On node 0 totalpages: 456141
[    0.000000] free_area_init_node: node 0, pgdat c18a4900, node_mem_map f5540200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3949 pages, LIFO batch:0
[    0.000000]   Normal zone: 1752 pages used for memmap
[    0.000000]   Normal zone: 222502 pages, LIFO batch:31
[    0.000000]   HighMem zone: 1785 pages used for memmap
[    0.000000]   HighMem zone: 226121 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] e820: [mem 0x7c000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f7b84000 s34176 r0 d23168 u57344
[    0.000000] pcpu-alloc: s34176 r0 d23168 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 452572
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-23-generic root=UUID=ebd1d15d-edda-4757-8d2d-8e037a7fb27a ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Initializing CPU#0
[    0.000000] allocated 3653504 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (00037bfe:0006f800)
[    0.000000] Memory: 1780092k/1826816k available (5965k kernel code, 44472k reserved, 2936k data, 756k init, 911624k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff15000 - 0xfffff000   ( 936 kB)
[    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
[    0.000000]       .init : 0xc18b2000 - 0xc196f000   ( 756 kB)
[    0.000000]       .data : 0xc15d3464 - 0xc18b17c0   (2936 kB)
[    0.000000]       .text : 0xc1000000 - 0xc15d3464   (5965 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:2304 nr_irqs:744 16
[    0.000000] CPU 0 irqstacks, hard=f500a000 soft=f500c000
[    0.000000] Extended CMOS year: 2000
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.004000] Detected 2526.791 MHz processor.
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5053.58 BogoMIPS (lpj=10107164)
[    0.000004] pid_max: default: 32768 minimum: 301
[    0.000028] Security Framework initialized
[    0.000042] AppArmor: AppArmor initialized
[    0.000043] Yama: becoming mindful.
[    0.000089] Mount-cache hash table entries: 512
[    0.000277] Initializing cgroup subsys cpuacct
[    0.000279] Initializing cgroup subsys memory
[    0.000286] Initializing cgroup subsys devices
[    0.000287] Initializing cgroup subsys freezer
[    0.000289] Initializing cgroup subsys blkio
[    0.000290] Initializing cgroup subsys perf_event
[    0.000316] CPU: Physical Processor ID: 0
[    0.000317] CPU: Processor Core ID: 0
[    0.000321] mce: CPU supports 9 MCE banks
[    0.000330] CPU0: Thermal monitoring handled by SMI
[    0.000336] using mwait in idle threads.
[    0.002307] ACPI: Core revision 20120320
[    0.039098] ftrace: allocating 24607 entries in 49 pages
[    0.050399] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.050897] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.090556] CPU0: Intel(R) Core(TM) i3 CPU       M 380  @ 2.53GHz stepping 05
[    0.195032] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[    0.195038] CPUID marked event: 'bus cycles' unavailable
[    0.195040] ... version:                3
[    0.195041] ... bit width:              48
[    0.195042] ... generic registers:      4
[    0.195043] ... value mask:             0000ffffffffffff
[    0.195044] ... max period:             000000007fffffff
[    0.195045] ... fixed-purpose events:   3
[    0.195046] ... event mask:             000000070000000f
[    0.195250] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.195337] CPU 1 irqstacks, hard=f517c000 soft=f517e000
[    0.205620] Initializing CPU#1
[    0.206378] CPU1: Thermal monitoring handled by SMI
[    0.195339] Booting Node   0, Processors  #1
[    0.208584] CPU 2 irqstacks, hard=f5198000 soft=f519a000
[    0.218734] Initializing CPU#2
[    0.219622] CPU2: Thermal monitoring handled by SMI
[    0.208588]  #2
[    0.221810] CPU 3 irqstacks, hard=f51a4000 soft=f51a6000
[    0.231958] Initializing CPU#3
[    0.232848] CPU3: Thermal monitoring handled by SMI
[    0.221813]  #3
[    0.235002] Brought up 4 CPUs
[    0.235006] Total of 4 processors activated (20214.32 BogoMIPS).
[    0.237853] devtmpfs: initialized
[    0.238020] EVM: security.selinux
[    0.238021] EVM: security.SMACK64
[    0.238022] EVM: security.capability
[    0.238087] PM: Registering ACPI NVS region [mem 0x6f6bf000-0x6f7befff] (1048576 bytes)
[    0.238946] dummy:
[    0.238978] RTC time: 15:23:39, date: 02/07/13
[    0.239023] NET: Registered protocol family 16
[    0.239113] Trying to unpack rootfs image as initramfs...
[    0.239148] EISA bus registered
[    0.239219] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.239220] ACPI: bus type pci registered
[    0.239281] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.239284] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.239285] PCI: Using MMCONFIG for extended config space
[    0.239286] PCI: Using configuration type 1 for base access
[    0.239404] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.239405] mtrr: probably your BIOS does not setup all CPUs.
[    0.239405] mtrr: corrected configuration.
[    0.240132] bio: create slab <bio-0> at 0
[    0.240215] ACPI: Added _OSI(Module Device)
[    0.240217] ACPI: Added _OSI(Processor Device)
[    0.240219] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.240220] ACPI: Added _OSI(Processor Aggregator Device)
[    0.242840] ACPI: EC: Look up EC in DSDT
[    0.245463] ACPI: Executed 2 blocks of module-level executable AML code
[    0.307042] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.307485] ACPI: SSDT 6f691a18 00466 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.308115] ACPI: Dynamic OEM Table Load:
[    0.308118] ACPI: SSDT   (null) 00466 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.308241] ACPI: SSDT 6f691518 004D1 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.308858] ACPI: Dynamic OEM Table Load:
[    0.308860] ACPI: SSDT   (null) 004D1 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.311204] ACPI: SSDT 6f690a98 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.311883] ACPI: Dynamic OEM Table Load:
[    0.311885] ACPI: SSDT   (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.331095] ACPI: SSDT 6f68fd98 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.331745] ACPI: Dynamic OEM Table Load:
[    0.331748] ACPI: SSDT   (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.498454] Freeing initrd memory: 14720k freed
[    1.868764] ACPI: Interpreter enabled
[    1.868775] ACPI: (supports S0 S3 S4 S5)
[    1.868812] ACPI: Using IOAPIC for interrupt routing
[    2.100105] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    2.108820] ACPI: Power Resource [FN00] (on)
[    2.109559] ACPI: Power Resource [FN01] (on)
[    2.110538] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    2.111063] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[    2.111068] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    2.111404] \_SB_.PCI0:_OSC invalid UUID
[    2.111405] _OSC request data:1 8 1f
[    2.111409] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    2.111912] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    2.111915] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    2.111917] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    2.111919] pci_root PNP0A08:00: host bridge window [mem 0x7c000000-0xfeafffff]
[    2.111947] PCI host bridge to bus 0000:00
[    2.111949] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    2.111951] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    2.111953] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    2.111954] pci_bus 0000:00: root bus resource [mem 0x7c000000-0xfeafffff]
[    2.111965] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[    2.111984] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[    2.112006] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
[    2.112018] pci 0000:00:02.0: reg 10: [mem 0x90000000-0x903fffff 64bit]
[    2.112024] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff 64bit pref]
[    2.112029] pci 0000:00:02.0: reg 20: [io  0x4050-0x4057]
[    2.112095] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[    2.112123] pci 0000:00:16.0: reg 10: [mem 0x94406100-0x9440610f 64bit]
[    2.112220] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    2.112265] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[    2.112707] pci 0000:00:1a.0: reg 10: [mem 0x94405c00-0x94405fff]
[    2.115240] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    2.115274] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[    2.115295] pci 0000:00:1b.0: reg 10: [mem 0x94400000-0x94403fff 64bit]
[    2.115397] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    2.115428] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[    2.115530] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    2.115561] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[    2.115663] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    2.115708] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[    2.116136] pci 0000:00:1d.0: reg 10: [mem 0x94405800-0x94405bff]
[    2.118670] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    2.118698] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    2.118787] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
[    2.118918] pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
[    2.118945] pci 0000:00:1f.2: reg 10: [io  0x4048-0x404f]
[    2.118957] pci 0000:00:1f.2: reg 14: [io  0x405c-0x405f]
[    2.118968] pci 0000:00:1f.2: reg 18: [io  0x4040-0x4047]
[    2.118979] pci 0000:00:1f.2: reg 1c: [io  0x4058-0x405b]
[    2.118990] pci 0000:00:1f.2: reg 20: [io  0x4020-0x403f]
[    2.119002] pci 0000:00:1f.2: reg 24: [mem 0x94405000-0x944057ff]
[    2.119069] pci 0000:00:1f.2: PME# supported from D3hot
[    2.119095] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[    2.119116] pci 0000:00:1f.3: reg 10: [mem 0x94406000-0x944060ff 64bit]
[    2.119146] pci 0000:00:1f.3: reg 20: [io  0x4000-0x401f]
[    2.119195] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[    2.119224] pci 0000:00:1f.6: reg 10: [mem 0x94404000-0x94404fff 64bit]
[    2.119403] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[    2.119421] pci 0000:01:00.0: reg 10: [io  0x3000-0x30ff]
[    2.119449] pci 0000:01:00.0: reg 18: [mem 0x90404000-0x90404fff 64bit pref]
[    2.119467] pci 0000:01:00.0: reg 20: [mem 0x90400000-0x90403fff 64bit pref]
[    2.119542] pci 0000:01:00.0: supports D1 D2
[    2.119544] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    2.127385] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    2.127395] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    2.127404] pci 0000:00:1c.0:   bridge window [mem 0x93400000-0x943fffff]
[    2.127418] pci 0000:00:1c.0:   bridge window [mem 0x90400000-0x913fffff 64bit pref]
[    2.127513] pci 0000:02:00.0: [10ec:8171] type 00 class 0x028000
[    2.127531] pci 0000:02:00.0: reg 10: [io  0x2000-0x20ff]
[    2.127544] pci 0000:02:00.0: reg 14: [mem 0x92400000-0x92403fff]
[    2.127657] pci 0000:02:00.0: supports D1 D2
[    2.127659] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
[    2.135376] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[    2.135386] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    2.135395] pci 0000:00:1c.1:   bridge window [mem 0x92400000-0x933fffff]
[    2.135407] pci 0000:00:1c.1:   bridge window [mem 0x91400000-0x923fffff 64bit pref]
[    2.135501] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[    2.135513] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    2.135515] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    2.135517] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    2.135519] pci 0000:00:1e.0:   bridge window [mem 0x7c000000-0xfeafffff] (subtractive decode)
[    2.135538] pci_bus 0000:00: on NUMA node 0
[    2.135541] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    2.135724] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    2.135809] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    2.135845] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    2.135944] \_SB_.PCI0:_OSC invalid UUID
[    2.135945] _OSC request data:1 1f 1f
[    2.135949]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    2.135980] \_SB_.PCI0:_OSC invalid UUID
[    2.135981] _OSC request data:1 0 1d
[    2.135985]  pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[    2.135986] ACPI _OSC control for PCIe not granted, disabling ASPM
[    2.140594] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[    2.140619] PCI host bridge to bus 0000:ff
[    2.140625] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[    2.140645] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[    2.140666] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[    2.140684] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[    2.140702] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[    2.140720] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[    2.140747] pci_bus 0000:ff: on NUMA node 0
[    2.140754]  pci0000:ff: Requesting ACPI _OSC control (0x1d)
[    2.140756]  pci0000:ff: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    2.140757] ACPI _OSC control for PCIe not granted, disabling ASPM
[    2.140944] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[    2.140987] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    2.141029] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[    2.141070] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    2.141113] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    2.141154] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    2.141196] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    2.141238] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    2.141332] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    2.141339] vgaarb: loaded
[    2.141340] vgaarb: bridge control possible 0000:00:02.0
[    2.141511] SCSI subsystem initialized
[    2.141557] libata version 3.00 loaded.
[    2.141574] ACPI: bus type usb registered
[    2.141594] usbcore: registered new interface driver usbfs
[    2.141603] usbcore: registered new interface driver hub
[    2.141622] usbcore: registered new device driver usb
[    2.141695] PCI: Using ACPI for IRQ routing
[    2.151615] PCI: pci_cache_line_size set to 64 bytes
[    2.151691] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[    2.151693] e820: reserve RAM buffer [mem 0x6f63f000-0x6fffffff]
[    2.151695] e820: reserve RAM buffer [mem 0x6f800000-0x6fffffff]
[    2.151786] NetLabel: Initializing
[    2.151788] NetLabel:  domain hash size = 128
[    2.151789] NetLabel:  protocols = UNLABELED CIPSOv4
[    2.151798] NetLabel:  unlabeled traffic allowed by default
[    2.151891] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    2.151897] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    2.153916] Switching to clocksource hpet
[    2.160211] AppArmor: AppArmor Filesystem Enabled
[    2.160236] pnp: PnP ACPI init
[    2.160250] ACPI: bus type pnp registered
[    2.270094] pnp 00:00: [bus 00-fe]
[    2.270097] pnp 00:00: [io  0x0000-0x0cf7 window]
[    2.270099] pnp 00:00: [io  0x0cf8-0x0cff]
[    2.270101] pnp 00:00: [io  0x0d00-0xffff window]
[    2.270103] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    2.270105] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    2.270106] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    2.270108] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    2.270110] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    2.270111] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    2.270113] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    2.270115] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    2.270116] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    2.270118] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    2.270120] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    2.270121] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    2.270123] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    2.270125] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    2.270127] pnp 00:00: [mem 0x7c000000-0xfeafffff window]
[    2.270128] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[    2.270203] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    2.270252] pnp 00:01: [io  0x0000-0x001f]
[    2.270253] pnp 00:01: [io  0x0081-0x0091]
[    2.270255] pnp 00:01: [io  0x0093-0x009f]
[    2.270257] pnp 00:01: [io  0x00c0-0x00df]
[    2.270259] pnp 00:01: [dma 4]
[    2.270285] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    2.270292] pnp 00:02: [mem 0xff000000-0xffffffff]
[    2.270315] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    2.270393] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[    2.270439] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
[    2.270442] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    2.270451] pnp 00:04: [io  0x00f0]
[    2.270462] pnp 00:04: [irq 13]
[    2.270488] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    2.270499] pnp 00:05: [io  0x002e-0x002f]
[    2.270501] pnp 00:05: [io  0x004e-0x004f]
[    2.270502] pnp 00:05: [io  0x0061]
[    2.270504] pnp 00:05: [io  0x0063]
[    2.270505] pnp 00:05: [io  0x0065]
[    2.270507] pnp 00:05: [io  0x0067]
[    2.270508] pnp 00:05: [io  0x0070]
[    2.270510] pnp 00:05: [io  0x0080]
[    2.270511] pnp 00:05: [io  0x0092]
[    2.270513] pnp 00:05: [io  0x00b2-0x00b3]
[    2.270515] pnp 00:05: [io  0x0680-0x069f]
[    2.270516] pnp 00:05: [io  0x0800-0x080f]
[    2.270518] pnp 00:05: [io  0x0810-0x0813]
[    2.270519] pnp 00:05: [io  0xffff]
[    2.270521] pnp 00:05: [io  0x0400-0x047f]
[    2.270522] pnp 00:05: [io  0x0500-0x057f]
[    2.270524] pnp 00:05: [io  0x164e-0x164f]
[    2.270564] system 00:05: [io  0x0680-0x069f] has been reserved
[    2.270567] system 00:05: [io  0x0800-0x080f] has been reserved
[    2.270569] system 00:05: [io  0x0810-0x0813] has been reserved
[    2.270571] system 00:05: [io  0xffff] has been reserved
[    2.270573] system 00:05: [io  0x0400-0x047f] has been reserved
[    2.270575] system 00:05: [io  0x0500-0x057f] has been reserved
[    2.270577] system 00:05: [io  0x164e-0x164f] has been reserved
[    2.270579] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    2.270601] pnp 00:06: [io  0x06a0-0x06af]
[    2.270603] pnp 00:06: [io  0x06b0-0x06ff]
[    2.270640] system 00:06: [io  0x06a0-0x06af] has been reserved
[    2.270642] system 00:06: [io  0x06b0-0x06ff] has been reserved
[    2.270644] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    2.270652] pnp 00:07: [io  0x0070-0x0077]
[    2.270658] pnp 00:07: [irq 8]
[    2.270682] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[    2.270726] pnp 00:08: [io  0x0060]
[    2.270728] pnp 00:08: [io  0x0064]
[    2.270733] pnp 00:08: [irq 1]
[    2.270758] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[    2.270769] pnp 00:09: [irq 12]
[    2.270797] pnp 00:09: Plug and Play ACPI device, IDs AUI0216 SYN1e00 SYN0002 PNP0f13 (active)
[    2.271054] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[    2.271056] pnp 00:0a: [mem 0xfed10000-0xfed13fff]
[    2.271058] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
[    2.271060] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
[    2.271061] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[    2.271063] pnp 00:0a: [mem 0x7c000000-0x7c000fff]
[    2.271065] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[    2.271066] pnp 00:0a: [mem 0xfeb00000-0xfeb03fff]
[    2.271068] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
[    2.271069] pnp 00:0a: [mem 0xff000000-0xffffffff]
[    2.271071] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[    2.271073] pnp 00:0a: [mem 0x7c000000-0x7c000fff]
[    2.271132] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    2.271134] system 00:0a: [mem 0xfed10000-0xfed13fff] has been reserved
[    2.271136] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[    2.271138] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[    2.271140] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[    2.271142] system 00:0a: [mem 0x7c000000-0x7c000fff] has been reserved
[    2.271144] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[    2.271146] system 00:0a: [mem 0xfeb00000-0xfeb03fff] has been reserved
[    2.271149] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[    2.271151] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
[    2.271153] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[    2.271155] system 00:0a: [mem 0x7c000000-0x7c000fff] has been reserved
[    2.271158] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    2.271287] pnp 00:0b: [bus ff]
[    2.271335] pnp 00:0b: Plug and Play ACPI device, IDs PNP0a03 (active)
[    2.271354] pnp: PnP ACPI: found 12 devices
[    2.271355] ACPI: ACPI bus type pnp unregistered
[    2.271357] PnPBIOS: Disabled by ACPI PNP
[    2.307832] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    2.307837] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    2.307844] pci 0000:00:1c.0:   bridge window [mem 0x93400000-0x943fffff]
[    2.307849] pci 0000:00:1c.0:   bridge window [mem 0x90400000-0x913fffff 64bit pref]
[    2.307856] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[    2.307860] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    2.307866] pci 0000:00:1c.1:   bridge window [mem 0x92400000-0x933fffff]
[    2.307871] pci 0000:00:1c.1:   bridge window [mem 0x91400000-0x923fffff 64bit pref]
[    2.307878] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[    2.307922] pci 0000:00:1e.0: setting latency timer to 64
[    2.307927] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    2.307929] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    2.307931] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    2.307932] pci_bus 0000:00: resource 7 [mem 0x7c000000-0xfeafffff]
[    2.307934] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    2.307936] pci_bus 0000:01: resource 1 [mem 0x93400000-0x943fffff]
[    2.307938] pci_bus 0000:01: resource 2 [mem 0x90400000-0x913fffff 64bit pref]
[    2.307940] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    2.307942] pci_bus 0000:02: resource 1 [mem 0x92400000-0x933fffff]
[    2.307944] pci_bus 0000:02: resource 2 [mem 0x91400000-0x923fffff 64bit pref]
[    2.307946] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
[    2.307948] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
[    2.307949] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[    2.307951] pci_bus 0000:03: resource 7 [mem 0x7c000000-0xfeafffff]
[    2.307982] NET: Registered protocol family 2
[    2.308036] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    2.308137] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    2.308435] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    2.308576] TCP: Hash tables configured (established 131072 bind 65536)
[    2.308578] TCP: reno registered
[    2.308581] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    2.308586] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    2.308640] NET: Registered protocol family 1
[    2.308651] pci 0000:00:02.0: Boot video device
[    2.337798] PCI: CLS 64 bytes, default 64
[    2.337857] Simple Boot Flag at 0x44 set to 0x1
[    2.338299] audit: initializing netlink socket (disabled)
[    2.338308] type=2000 audit(1360250621.212:1): initialized
[    2.358650] highmem bounce pool size: 64 pages
[    2.358665] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    2.360031] VFS: Disk quotas dquot_6.5.2
[    2.360074] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    2.360514] fuse init (API version 7.19)
[    2.360586] msgmni has been set to 1724
[    2.360990] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    2.361023] io scheduler noop registered
[    2.361025] io scheduler deadline registered (default)
[    2.361031] io scheduler cfq registered
[    2.361234] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    2.361251] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    2.361293] intel_idle: MWAIT substates: 0x1120
[    2.361295] intel_idle: v0.4 model 0x25
[    2.361296] intel_idle: lapic_timer_reliable_states 0xffffffff
[    2.613606] ACPI: AC Adapter [AC] (on-line)
[    2.613708] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    2.613712] ACPI: Power Button [PWRB]
[    2.613744] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    2.613780] ACPI: Lid Switch [LID0]
[    2.613812] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    2.613815] ACPI: Sleep Button [SLPB]
[    2.613855] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    2.613857] ACPI: Power Button [PWRF]
[    2.614093] ACPI: Fan [FAN0] (on)
[    2.614303] ACPI: Fan [FAN1] (on)
[    2.614360] ACPI: Requesting acpi_cpufreq
[    2.840137] thermal LNXTHERM:00: registered as thermal_zone0
[    2.840140] ACPI: Thermal Zone [THRM] (0 C)
[    2.840156] ACPI: Battery Slot [BAT0] (battery present)
[    2.840182] GHES: HEST is not enabled!
[    2.840268] isapnp: Scanning for PnP cards...
[    2.840280] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    2.841669] Linux agpgart interface v0.103
[    2.841738] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[    2.841778] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    2.842362] agpgart-intel 0000:00:00.0: detected 131072K stolen memory
[    2.842528] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[    2.843732] brd: module loaded
[    2.844355] loop: module loaded
[    2.844458] ahci 0000:00:1f.2: version 3.0
[    2.844528] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[    2.844564] ahci: SSS flag set, parallel bus scan disabled
[    2.844609] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x13 impl SATA mode
[    2.844612] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[    2.844618] ahci 0000:00:1f.2: setting latency timer to 64
[    2.857763] scsi0 : ahci
[    2.857842] scsi1 : ahci
[    2.857912] scsi2 : ahci
[    2.857975] scsi3 : ahci
[    2.858037] scsi4 : ahci
[    2.858271] ata1: SATA max UDMA/133 abar m2048@0x94405000 port 0x94405100 irq 40
[    2.858274] ata2: SATA max UDMA/133 abar m2048@0x94405000 port 0x94405180 irq 40
[    2.858275] ata3: DUMMY
[    2.858276] ata4: DUMMY
[    2.858279] ata5: SATA max UDMA/133 abar m2048@0x94405000 port 0x94405300 irq 40
[    2.858583] Fixed MDIO Bus: probed
[    2.858623] tun: Universal TUN/TAP device driver, 1.6
[    2.858624] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    2.858660] PPP generic driver version 2.4.2
[    2.858701] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.858730] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    2.858734] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    2.858739] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    2.858764] ehci_hcd 0000:00:1a.0: debug port 2
[    2.862699] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    2.862714] ehci_hcd 0000:00:1a.0: irq 16, io mem 0x94405c00
[    2.873425] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    2.873457] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.873459] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.873461] usb usb1: Product: EHCI Host Controller
[    2.873462] usb usb1: Manufacturer: Linux 3.5.0-23-generic ehci_hcd
[    2.873464] usb usb1: SerialNumber: 0000:00:1a.0
[    2.873595] hub 1-0:1.0: USB hub found
[    2.873599] hub 1-0:1.0: 3 ports detected
[    2.873665] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    2.873669] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    2.873673] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.873696] ehci_hcd 0000:00:1d.0: debug port 2
[    2.877632] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    2.877649] ehci_hcd 0000:00:1d.0: irq 20, io mem 0x94405800
[    2.889423] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    2.889463] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.889465] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.889468] usb usb2: Product: EHCI Host Controller
[    2.889470] usb usb2: Manufacturer: Linux 3.5.0-23-generic ehci_hcd
[    2.889472] usb usb2: SerialNumber: 0000:00:1d.0
[    2.889574] hub 2-0:1.0: USB hub found
[    2.889577] hub 2-0:1.0: 3 ports detected
[    2.889629] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.889642] uhci_hcd: USB Universal Host Controller Interface driver
[    2.889681] usbcore: registered new interface driver libusual
[    2.889719] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.906352] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.906357] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.906459] mousedev: PS/2 mouse device common for all mice
[    2.906848] rtc_cmos 00:07: RTC can wake from S4
[    2.906975] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    2.907007] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    2.907049] device-mapper: uevent: version 1.0.3
[    2.907104] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    2.907128] EISA: Probing bus 0 at eisa.0
[    2.907130] EISA: Cannot allocate resource for mainboard
[    2.907132] Cannot allocate resource for EISA slot 1
[    2.907133] Cannot allocate resource for EISA slot 2
[    2.907134] Cannot allocate resource for EISA slot 3
[    2.907135] Cannot allocate resource for EISA slot 4
[    2.907136] Cannot allocate resource for EISA slot 5
[    2.907137] Cannot allocate resource for EISA slot 6
[    2.907138] Cannot allocate resource for EISA slot 7
[    2.907139] Cannot allocate resource for EISA slot 8
[    2.907140] EISA: Detected 0 cards.
[    2.907203] cpuidle: using governor ladder
[    2.907284] cpuidle: using governor menu
[    2.907285] EFI Variables Facility v0.08 2004-May-17
[    2.907515] ashmem: initialized
[    2.907662] TCP: cubic registered
[    2.907746] NET: Registered protocol family 10
[    2.907910] NET: Registered protocol family 17
[    2.907919] Key type dns_resolver registered
[    2.907982] Using IPI No-Shortcut mode
[    2.908072] PM: Hibernation image not present or could not be loaded.
[    2.908083] registered taskstats version 1
[    2.911244] Key type trusted registered
[    2.913044] Key type encrypted registered
[    2.915091]   Magic number: 1:912:385
[    2.915117] thermal cooling_device0: hash matches
[    2.915214] rtc_cmos 00:07: setting system clock to 2013-02-07 15:23:42 UTC (1360250622)
[    2.915979] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.915980] EDD information not available.
[    2.923640] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    3.177318] ata1: SATA link down (SStatus 0 SControl 300)
[    3.185313] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    3.202172] isapnp: No Plug & Play device found
[    3.238869] ACPI: Battery Slot [BAT0] (battery present)
[    3.317705] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[    3.317710] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.318124] hub 1-1:1.0: USB hub found
[    3.318345] hub 1-1:1.0: 6 ports detected
[    3.337222] Refined TSC clocksource calibration: 2526.999 MHz.
[    3.337231] Switching to clocksource tsc
[    3.429232] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[    3.521135] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.522404] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    3.522667] ata2.00: ACPI cmd ef/10:02:00:00:00:b0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    3.522673] ata2.00: ACPI cmd ef/10:03:00:00:00:b0 (SET FEATURES) filtered out
[    3.522919] ata2.00: ACPI cmd ef/10:04:00:00:00:b0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    3.523167] ata2.00: ACPI cmd ef/10:05:00:00:00:b0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    3.561561] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[    3.561566] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.561982] hub 2-1:1.0: USB hub found
[    3.562197] hub 2-1:1.0: 8 ports detected
[    3.579569] ata2.00: ATA-8: ST9500325AS, 0001SDM1, max UDMA/133
[    3.579577] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    3.581962] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    3.582327] ata2.00: ACPI cmd ef/10:02:00:00:00:b0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    3.582335] ata2.00: ACPI cmd ef/10:03:00:00:00:b0 (SET FEATURES) filtered out
[    3.582781] ata2.00: ACPI cmd ef/10:04:00:00:00:b0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    3.583173] ata2.00: ACPI cmd ef/10:05:00:00:00:b0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    3.583559] ata2.00: configured for UDMA/133
[    3.583938] scsi 1:0:0:0: Direct-Access     ATA      ST9500325AS      0001 PQ: 0 ANSI: 5
[    3.584177] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    3.584217] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    3.584353] sd 1:0:0:0: [sda] Write Protect is off
[    3.584357] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.584457] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.633284] usb 1-1.4: new high-speed USB device number 3 using ehci_hcd
[    3.637601]  sda: sda1 sda2 < sda5 >
[    3.638685] sd 1:0:0:0: [sda] Attached SCSI disk
[    3.784076] usb 1-1.4: New USB device found, idVendor=0c45, idProduct=6409
[    3.784081] usb 1-1.4: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    3.784085] usb 1-1.4: Product: USB 2.0 Camera
[    3.784088] usb 1-1.4: Manufacturer: USB 2.0 Camera
[    3.857164] usb 1-1.5: new high-speed USB device number 4 using ehci_hcd
[    3.900918] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.904121] ata5.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    3.906581] ata5.00: ACPI cmd ef/10:02:00:00:00:a0 (SET FEATURES) succeeded
[    3.906587] ata5.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    3.909045] ata5.00: ACPI cmd ef/10:04:00:00:00:a0 (SET FEATURES) succeeded
[    3.911800] ata5.00: ACPI cmd ef/10:05:00:00:00:a0 (SET FEATURES) succeeded
[    3.912473] ata5.00: ATAPI: TSSTcorp CDDVDW SN-S083F, SB01, max UDMA/100
[    3.918178] ata5.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    3.920637] ata5.00: ACPI cmd ef/10:02:00:00:00:a0 (SET FEATURES) succeeded
[    3.920643] ata5.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    3.923106] ata5.00: ACPI cmd ef/10:04:00:00:00:a0 (SET FEATURES) succeeded
[    3.925934] ata5.00: configured for UDMA/100
[    3.932107] scsi 4:0:0:0: CD-ROM            TSSTcorp CDDVDW SN-S083F  SB01 PQ: 0 ANSI: 5
[    3.941279] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.941283] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.941558] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    3.941715] sr 4:0:0:0: Attached scsi generic sg1 type 5
[    3.942037] Freeing unused kernel memory: 756k freed
[    3.942287] Write protecting the kernel text: 5968k
[    3.942303] Write protecting the kernel read-only data: 2428k
[    3.942304] NX-protecting the kernel data: 4272k
[    3.960584] udevd[112]: starting version 175
[    4.207243] usb 1-1.5: New USB device found, idVendor=0bda, idProduct=0138
[    4.207252] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.207257] usb 1-1.5: Product: USB2.0-CRW
[    4.207262] usb 1-1.5: Manufacturer: Generic
[    4.207266] usb 1-1.5: SerialNumber: 20090516388200000
[    4.215100] Initializing USB Mass Storage driver...
[    4.215143] usbcore: registered new interface driver usb-storage
[    4.215144] USB Mass Storage support registered.
[    4.284907] usb 2-1.1: new high-speed USB device number 3 using ehci_hcd
[    4.383547] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=8187
[    4.383551] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.383554] usb 2-1.1: Product: RTL8187_Wireless
[    4.383556] usb 2-1.1: Manufacturer: Manufacturer_Realtek_RTL8187_
[    4.383559] usb 2-1.1: SerialNumber: 000F04B10ABC
[    4.389847] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    4.389975] r8169 0000:01:00.0: irq 41 for MSI/MSI-X
[    4.391362] r8169 0000:01:00.0: eth0: RTL8168e/8111e at 0xf8472000, 1c:75:08:d1:47:d2, XID 0c200000 IRQ 41
[    4.391366] r8169 0000:01:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    4.413203] usbcore: registered new interface driver uas
[    4.432710] scsi5 : usb-storage 1-1.5:1.0
[    4.432814] usbcore: registered new interface driver ums-realtek
[    4.456860] usb 2-1.2: new low-speed USB device number 4 using ehci_hcd
[    4.559794] usb 2-1.2: New USB device found, idVendor=1a2c, idProduct=0023
[    4.559802] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.559808] usb 2-1.2: Product: USB Keykoard
[    4.559812] usb 2-1.2: Manufacturer: USB
[    4.567744] usbcore: registered new interface driver usbhid
[    4.567749] usbhid: USB HID core driver
[    4.569574] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input5
[    4.569708] hid-generic 0003:1A2C:0023.0001: input,hidraw0: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:1d.0-1.2/input0
[    4.632641] usb 2-1.3: new low-speed USB device number 5 using ehci_hcd
[    4.730205] usb 2-1.3: New USB device found, idVendor=046d, idProduct=c016
[    4.730212] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.730218] usb 2-1.3: Product: Optical USB Mouse
[    4.730223] usb 2-1.3: Manufacturer: Logitech
[    4.733769] usb 1-1.5: USB disconnect, device number 4
[    5.452866] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   14.563115] hid-generic 0003:1A2C:0023.0002: usb_submit_urb(ctrl) failed: -1
[   14.563168] hid-generic 0003:1A2C:0023.0002: timeout initializing reports
[   14.563302] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input6
[   14.563508] hid-generic 0003:1A2C:0023.0002: input,hidraw1: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:1d.0-1.2/input1
[   14.563679] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input7
[   14.564201] hid-generic 0003:046D:C016.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-1.3/input0
[   22.324603] usb 2-1.2: USB disconnect, device number 4
[   22.580310] usb 2-1.3: USB disconnect, device number 5
[   27.721048] Adding 1822716k swap on /dev/sda5.  Priority:-1 extents:1 across:1822716k
[   27.726128] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   27.761022] udevd[347]: starting version 175
[   27.816091] lp: driver loaded but no devices found
[   27.819098] cfg80211: Calling CRDA to update world regulatory domain
[   27.823429] Broadcom 43xx driver loaded [ Features: PNL ]
[   27.824973] cfg80211: World regulatory domain updated:
[   27.824975] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   27.824977] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   27.824979] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   27.824980] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   27.824982] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   27.824983] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   28.038457] wmi: Mapper loaded
[   28.078375] input: HP WMI hotkeys as /devices/virtual/input/input8
[   28.093956] mei 0000:00:16.0: setting latency timer to 64
[   28.094034] mei 0000:00:16.0: irq 42 for MSI/MSI-X
[   28.097178] [drm] Initialized drm 1.1.0 20060810
[   28.104356] mei 0000:00:16.0: wd: failed to find the client
[   28.110341] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   28.110346] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   28.110348] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   28.110350] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   28.110352] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   28.110354] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   28.110356] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   28.110358] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   28.110360] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   28.110362] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   28.110363] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   28.110365] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   28.110367] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   28.110369] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   28.110370] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   28.110372] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   28.110374] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   28.110376] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   28.110378] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   28.110380] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   28.110382] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   28.110384] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   28.110386] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   28.110388] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   28.110390] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   28.110392] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   28.110394] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[   28.110520] rtl8192se: FW Power Save off (module option)
[   28.110591] rtl8192se: Driver for Realtek RTL8192SE/RTL8191SE
[   28.110591] Loading firmware rtlwifi/rtl8192sefw.bin
[   28.113353] i915 0000:00:02.0: setting latency timer to 64
[   28.113899] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[   28.113910] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   28.113912] [drm] Driver supports precise vblank timestamp query.
[   28.114085] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   28.132195] Linux video capture interface: v2.00
[   28.134077] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:6409)
[   28.142168] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input9
[   28.142330] usbcore: registered new interface driver uvcvideo
[   28.142332] USB Video Class driver (1.1.1)
[   28.174207] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
[   28.200668] type=1400 audit(1360250647.796:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=467 comm="apparmor_parser"
[   28.201174] type=1400 audit(1360250647.796:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=467 comm="apparmor_parser"
[   28.201459] type=1400 audit(1360250647.796:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=467 comm="apparmor_parser"
[   28.355609] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
[   28.355918] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[   28.357594] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
[   28.359048] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[   28.359952] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2
[   28.361293] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   28.366683] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[   28.398412] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   28.398422] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   28.398428] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   28.398434] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   28.398438] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   28.398444] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   28.398449] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   28.398455] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   28.398460] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   28.398465] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   28.398470] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   28.398475] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   28.398480] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   28.398486] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   28.398490] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   28.398496] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   28.398503] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   28.398505] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   28.398507] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   28.398509] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   28.398510] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   28.398512] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   28.398513] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   28.398514] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   28.398515] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   28.398517] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   28.398518] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[   28.398520] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   28.398632] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[   28.398833] ieee80211 phy1: hwaddr 00:0f:04:b1:0a:bc, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2
[   28.420452] rtl8187: Customer ID is 0x00
[   28.420525] Registered led device: rtl8187-phy1::radio
[   28.420589] Registered led device: rtl8187-phy1::tx
[   28.420621] Registered led device: rtl8187-phy1::rx
[   28.421422] rtl8187: wireless switch is on
[   28.421471] usbcore: registered new interface driver rtl8187
[   28.686630] fbcon: inteldrmfb (fb0) is primary device
[   28.686788] Console: switching to colour frame buffer device 170x48
[   28.686827] fb0: inteldrmfb frame buffer device
[   28.686829] drm: registered panic notifier
[   28.687866] acpi device:02: registered as cooling_device6
[   28.689431] acpi device:03: registered as cooling_device7
[   28.689605] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   28.689787] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input10
[   28.690099] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   28.690127] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[   28.692621] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[   28.692765] ACPI Warning: 0x00000460-0x0000047f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[   28.692771] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   28.692773] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
[   28.692776] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[   28.692779] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   28.692783] ACPI Warning: 0x00000500-0x0000057f SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
[   28.692786] ACPI Warning: 0x00000500-0x0000057f SystemIO conflicts with Region \_SB_.PCI0.GFX0.GPIO 2 (20120320/utaddress-251)
[   28.692789] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   28.692790] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   28.692956] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   28.742878] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   28.742967] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   28.743047] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   29.258501] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1a0b1, caps: 0xd04773/0xa40000/0xa0000
[   29.327042] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input14
[   29.342179] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   29.493560] init: failsafe main process (798) killed by TERM signal
[   29.523678] Bluetooth: Core ver 2.16
[   29.523705] NET: Registered protocol family 31
[   29.523707] Bluetooth: HCI device and connection manager initialized
[   29.523984] Bluetooth: HCI socket layer initialized
[   29.523987] Bluetooth: L2CAP socket layer initialized
[   29.523994] Bluetooth: SCO socket layer initialized
[   29.525788] Bluetooth: RFCOMM TTY layer initialized
[   29.525793] Bluetooth: RFCOMM socket layer initialized
[   29.525794] Bluetooth: RFCOMM ver 1.11
[   29.530727] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   29.530731] Bluetooth: BNEP filters: protocol multicast
[   29.559606] ppdev: user-space parallel port driver
[   29.572609] type=1400 audit(1360250649.168:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=899 comm="apparmor_parser"
[   29.573083] type=1400 audit(1360250649.168:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=899 comm="apparmor_parser"
[   29.754320] r8169 0000:01:00.0: eth0: link down
[   29.754502] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   29.754967] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   29.794964] type=1400 audit(1360250649.392:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=926 comm="apparmor_parser"
[   29.795445] type=1400 audit(1360250649.392:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=926 comm="apparmor_parser"
[   29.801375] type=1400 audit(1360250649.396:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=929 comm="apparmor_parser"
[   29.801717] type=1400 audit(1360250649.396:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=928 comm="apparmor_parser"
[   29.801935] type=1400 audit(1360250649.396:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=929 comm="apparmor_parser"
[   29.907486] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   29.908145] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   32.294950] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[   32.295304] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[   32.469329] init: plymouth-stop pre-start process (1402) terminated with status 1
[   34.158737] wlan0: authenticate with 00:1c:a8:81:e7:b4
[   34.170325] wlan0: direct probe to 00:1c:a8:81:e7:b4 (try 1/3)
[   34.372022] wlan0: direct probe to 00:1c:a8:81:e7:b4 (try 2/3)
[   34.575906] wlan0: direct probe to 00:1c:a8:81:e7:b4 (try 3/3)
[   34.779816] wlan0: authentication with 00:1c:a8:81:e7:b4 timed out
[   35.851625] wlan0: authenticate with 00:1c:a8:81:e7:b4
[   35.871259] wlan0: send auth to 00:1c:a8:81:e7:b4 (try 1/3)
[   35.874689] wlan0: authenticated
[   35.891189] wlan0: associate with 00:1c:a8:81:e7:b4 (try 1/3)
[   35.894756] wlan0: RX AssocResp from 00:1c:a8:81:e7:b4 (capab=0x431 status=0 aid=1)
[   35.895783] wlan0: associated
[   35.896146] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   35.896257] cfg80211: Calling CRDA for country: NA
[   36.339341] wlan1: authenticate with 00:1c:a8:81:e7:b4
[   36.459146] wlan1: send auth to 00:1c:a8:81:e7:b4 (try 1/3)
[   36.461586] wlan1: authenticated
[   36.514843] wlan1: associate with 00:1c:a8:81:e7:b4 (try 1/3)
[   36.518698] wlan1: RX AssocResp from 00:1c:a8:81:e7:b4 (capab=0x431 status=0 aid=2)
[   36.519553] wlan1: associated
[   36.519764] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[  104.724557] wlan0: deauthenticating from 00:1c:a8:81:e7:b4 by local choice (reason=3)
[ 4535.613355] usb 2-1.3: new low-speed USB device number 6 using ehci_hcd
[ 4535.716678] usb 2-1.3: New USB device found, idVendor=1a2c, idProduct=0023
[ 4535.716687] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4535.716693] usb 2-1.3: Product: USB Keykoard
[ 4535.716697] usb 2-1.3: Manufacturer: USB
[ 4535.719987] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input15
[ 4535.720120] hid-generic 0003:1A2C:0023.0004: input,hidraw0: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:1d.0-1.3/input0
[ 4538.822354] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/input/input16
[ 4538.822560] hid-generic 0003:1A2C:0023.0005: input,hidraw1: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:1d.0-1.3/input1
[ 4538.823055] usb 2-1.3: USB disconnect, device number 6
[ 4548.406255] usb 2-1.2: new low-speed USB device number 7 using ehci_hcd
[ 4548.509461] usb 2-1.2: New USB device found, idVendor=1a2c, idProduct=0023
[ 4548.509471] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4548.509479] usb 2-1.2: Product: USB Keykoard
[ 4548.509485] usb 2-1.2: Manufacturer: USB
[ 4548.512588] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input17
[ 4548.512767] hid-generic 0003:1A2C:0023.0006: input,hidraw0: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:1d.0-1.2/input0
[ 4558.508683] hid-generic 0003:1A2C:0023.0007: usb_submit_urb(ctrl) failed: -1
[ 4558.508697] hid-generic 0003:1A2C:0023.0007: timeout initializing reports
[ 4558.508848] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input18
[ 4558.508983] hid-generic 0003:1A2C:0023.0007: input,hidraw1: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:1d.0-1.2/input1
[ 4583.203137] usb 2-1.3: new low-speed USB device number 8 using ehci_hcd
[ 4583.299917] usb 2-1.3: New USB device found, idVendor=046d, idProduct=c016
[ 4583.299926] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4583.299932] usb 2-1.3: Product: Optical USB Mouse
[ 4583.299937] usb 2-1.3: Manufacturer: Logitech
[ 4583.303058] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input19
[ 4583.303357] hid-generic 0003:046D:C016.0008: input,hidraw2: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-1.3/input0
[ 4613.058416] ieee80211 phy1: wlan1: No probe response from AP 00:1c:a8:81:e7:b4 after 500ms, disconnecting.
[ 4613.095430] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 4613.095438] cfg80211: Restoring regulatory settings
[ 4613.095444] cfg80211: Calling CRDA to update world regulatory domain
[ 4613.101061] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 4613.101066] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4613.101069] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 4613.101071] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4613.101073] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 4613.101075] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4613.101077] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 4613.101079] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4613.101080] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 4613.101082] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4613.101084] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 4613.101086] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4613.101088] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 4613.101090] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4613.101092] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 4613.101094] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4613.101096] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 4613.101098] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4613.101100] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 4613.101102] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4613.101104] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 4613.101106] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4613.101108] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 4613.101110] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4613.101112] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 4613.101114] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4613.101116] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 4613.101118] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4613.101121] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 4613.101124] cfg80211: World regulatory domain updated:
[ 4613.101125] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4613.101127] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4613.101129] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4613.101131] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4613.101133] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4613.101135] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4628.841524] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 4635.547084] wlan1: authenticate with 00:1c:a8:81:e7:b4
[ 4635.660896] wlan1: send auth to 00:1c:a8:81:e7:b4 (try 1/3)
[ 4635.663341] wlan1: authenticated
[ 4635.721863] wlan1: associate with 00:1c:a8:81:e7:b4 (try 1/3)
[ 4635.725336] wlan1: RX AssocResp from 00:1c:a8:81:e7:b4 (capab=0x431 status=0 aid=1)
[ 4635.726153] wlan1: associated
[ 4635.726390] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 4635.726486] cfg80211: Calling CRDA for country: NA
[ 4707.609141] usb 2-1.1: USB disconnect, device number 3
[ 4707.610403] wlan1: deauthenticating from 00:1c:a8:81:e7:b4 by local choice (reason=3)
[ 4707.686200] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 4707.686213] cfg80211: Restoring regulatory settings
[ 4707.686221] cfg80211: Calling CRDA to update world regulatory domain
[ 4708.126477] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 4708.126483] cfg80211: World regulatory domain updated:
[ 4708.126484] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4708.126487] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4708.126490] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4708.126492] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4708.126494] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4708.126495] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4710.876670] usb 2-1.1: new high-speed USB device number 9 using ehci_hcd
[ 4710.975143] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=8187
[ 4710.975152] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4710.975158] usb 2-1.1: Product: RTL8187_Wireless
[ 4710.975162] usb 2-1.1: Manufacturer: Manufacturer_Realtek_RTL8187_
[ 4710.975167] usb 2-1.1: SerialNumber: 000F04B10ABC
[ 4711.232398] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 4711.232402] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4711.232404] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 4711.232405] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4711.232407] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 4711.232408] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4711.232409] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 4711.232411] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4711.232412] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 4711.232413] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4711.232415] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 4711.232416] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4711.232417] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 4711.232419] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4711.232420] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 4711.232421] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4711.232422] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 4711.232424] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4711.232425] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 4711.232426] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4711.232428] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 4711.232429] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4711.232430] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 4711.232432] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4711.232433] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 4711.232434] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4711.232436] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 4711.232437] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4711.232654] ieee80211 phy2: Selected rate control algorithm 'minstrel_ht'
[ 4711.233040] ieee80211 phy2: hwaddr 00:0f:04:b1:0a:bc, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2
[ 4711.252582] rtl8187: Customer ID is 0x00
[ 4711.252638] Registered led device: rtl8187-phy2::radio
[ 4711.252659] Registered led device: rtl8187-phy2::tx
[ 4711.252678] Registered led device: rtl8187-phy2::rx
[ 4711.253067] rtl8187: wireless switch is on
[ 4713.616638] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 4713.617486] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 4717.445133] wlan1: authenticate with 00:1c:a8:81:e7:b4
[ 4717.554892] wlan1: send auth to 00:1c:a8:81:e7:b4 (try 1/3)
[ 4717.557345] wlan1: authenticated
[ 4717.616636] wlan1: associate with 00:1c:a8:81:e7:b4 (try 1/3)
[ 4717.620335] wlan1: RX AssocResp from 00:1c:a8:81:e7:b4 (capab=0x431 status=0 aid=1)
[ 4717.621335] wlan1: associated
[ 4717.621520] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 4717.621622] cfg80211: Calling CRDA for country: NA


dmesg | tail çıktısı
Kod Seç
[ 4713.616638] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 4713.617486] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 4717.445133] wlan1: authenticate with 00:1c:a8:81:e7:b4
[ 4717.554892] wlan1: send auth to 00:1c:a8:81:e7:b4 (try 1/3)
[ 4717.557345] wlan1: authenticated
[ 4717.616636] wlan1: associate with 00:1c:a8:81:e7:b4 (try 1/3)
[ 4717.620335] wlan1: RX AssocResp from 00:1c:a8:81:e7:b4 (capab=0x431 status=0 aid=1)
[ 4717.621335] wlan1: associated
[ 4717.621520] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 4717.621622] cfg80211: Calling CRDA for country: NA


Teşekkürler hocam.


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 08 Şubat 2013 - 16:10:31

Anlaşılan pek ilgi yok konuya.  :)

burk

#3
09 Şubat 2013 - 14:04:11
@Salvo günlük hayatın işlerinden ancak zaman ayırabiliyoruz foruma.

Şimdi ağ konusuyla ilgili sorun tam olarak neydi, çıktılar normal göründü bana.

heartsmagic

#4
09 Şubat 2013 - 18:08:00
@Salvo, günlük koşturmaca ve işler konusuna ben de katılarak gördüğüm öneriyi paylaşayım burada. Kullanacağımız öneri şu:
http://ubuntuforums.org/showpost.php?p=11193285&postcount=5

Kısacası yapacağın şey http://www.realtek.com.tw/DOWNLOADS/downloadsView.aspx?Langid=1&PNid=21&PFid=48&Level=5&Conn=4&DownTypeID=3&GetDown=false adresine gidip ikinci sıradaki sürücüyü indirmek. Ev dizini veya hangi dizine koyduysan arşivden çıkartmak ve uçbirimden o dizine giderek sürücüyü derlemek.

Kod Seç
cd /nerede/ise/bu/dizin

Örneğin masaüstündeyse:
Kod Seç
cd ~/Masaüstü/sürücü_dizin_ismi

Daha sonra derleme aşamalarına geçeceksin:
Kod Seç
make
sudo make install
reboot

Yapacağın, deneyeceğin işlemleri aynen buraya geçersin, sorun var mı yok mu diye bizler de görmüş oluruz.
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?

Böylece yalan, dünyanın düzenine dönüştürülüyor.

Salvo

#5
09 Şubat 2013 - 19:43:05
Derleme sırasında hata oluyor.Hata neyden kaynaklı acaba.
Kod Seç
neo@Zion:~/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011$ make
make -C /lib/modules/3.5.0-23-generic/build M=/home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011 modules
make[1]:`/usr/src/linux-headers-3.5.0-23-generic' dizinine giriliyor
  CC [M]  /home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/base.o
/home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/base.c: '_rtl_init_mac80211' fonksiyonunda:
/home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/base.c:319:6: hata: 'IEEE80211_HW_BEACON_FILTER' undeclared (first use in this function)
/home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/base.c:319:6: bilgi: each undeclared identifier is reported only once for each function it appears in
make[2]: *** [/home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/base.o] Hata 1
make[1]: *** [_module_/home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011] Hata 2
make[1]: `/usr/src/linux-headers-3.5.0-23-generic' dizininden çıkılıyor
make: *** [all] Hata 2
@ burk
Hocam sorunum şu,Laptop'un kendi kablosuz adaptörü oldukça yavaş bir internet sağlamakta belki uzaklıkla alakalı olabilir diyeceğim,windows 7 varken makinede aynı uzaklıkta aynı kart ile sorunsuz bağlantı yaşıyordum ancak ubuntu'da aynı şey söz konusu değil.Harici olarak bağladığım diğer wireless adaptörle gayet kararlı bir bağlantı yaşıyorum.Ben dahili adaptörün driver olarak tam yüklenmediğini düşünüyorum.

burk

#6
09 Şubat 2013 - 20:17:33
Kod Seç
ls /Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011 çıktısı nedir?

Ayrıca sürücü yüklenmemiş olsa bağlantı sağlanamaz, DNS ayarlarını değiştirmeyi denediniz mi?

heartsmagic

#7
09 Şubat 2013 - 21:52:23
base.c dosyasını açıp 319. satırın başına // koyup tekrar derlemeyi dener misin? Forumda daha önce bu sürücüleri derlemeye çalışırken karşımıza çıkan bir şey bu.

Not: Satırda şu olmalı
Kod Seç
IEEE80211_HW_BEACON_FILTER
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?

Böylece yalan, dünyanın düzenine dönüştürülüyor.

Salvo

#8
09 Şubat 2013 - 21:59:49 Son düzenlenme: 09 Şubat 2013 - 22:22:37 Salvo
@Burk
Hocam benim demek istediğim linux'in çalışma prensiplerini çok bilmesemde derslerde gördüğüm kadarıyla pek destek alamıyor linux üreticilerden.Bunun akabinde düşündüğüm realtekin farklı bir kablosuz adaptörü olmasına rağmen linux için driveri olmadığından seva sürümünün yüklenmiş olabileceği.Bu nedenden dolayı kararlı bağlantı da sorun yaşadığım.Dns ayarları,ipv6 ayarları,firefox için gerekli olan tüm yan programları yükledim.
Verdiğiniz kodun çıktısı
Kod Seç
ls: /Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011'e erişilemedi: Böyle bir dosya ya da dizin yok



Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 09 Şubat 2013 - 22:12:13

@heartsmagic
Kod Seç
neo@Zion:~$ cd ~/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011
neo@Zion:~/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011$ make
make -C /lib/modules/3.5.0-23-generic/build M=/home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011 modules
make[1]:`/usr/src/linux-headers-3.5.0-23-generic' dizinine giriliyor
  CC [M]  /home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/base.o
  CC [M]  /home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rc.o
/home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rc.c:283:2: UYARI: uyumsuz gösterici türünde ilklendirme [enabled by default]
/home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rc.c:283:2: UYARI: ('rtl_rate_ops.rate_update' için near ilklendirme) [enabled by default]
  CC [M]  /home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/debug.o
  CC [M]  /home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/regd.o
  CC [M]  /home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/efuse.o
  CC [M]  /home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/cam.o
  CC [M]  /home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/ps.o
  CC [M]  /home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/core.o
  CC [M]  /home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/stats.o
  CC [M]  /home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/pci.o
  LD [M]  /home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtlwifi.o
  Building modules, stage 2.
  MODPOST 1 modules
  CC      /home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtlwifi.mod.o
  LD [M]  /home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtlwifi.ko
make[1]: `/usr/src/linux-headers-3.5.0-23-generic' dizininden çıkılıyor
make[1]:`/home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192ce' dizinine giriliyor
make -C /lib/modules/3.5.0-23-generic/build M=/home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192ce modules
make[2]:`/usr/src/linux-headers-3.5.0-23-generic' dizinine giriliyor
  CC [M]  /home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192ce/hw.o
  CC [M]  /home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192ce/table.o
  CC [M]  /home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192ce/sw.o
/home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192ce/sw.c: '__check_swenc' fonksiyonunda:
/home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192ce/sw.c:356:1: UYARI: uyumsuz gösterici türünde dönüş değeri [enabled by default]
  CC [M]  /home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192ce/trx.o
  CC [M]  /home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192ce/led.o
  CC [M]  /home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192ce/fw.o
  CC [M]  /home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192ce/phy.o
  CC [M]  /home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192ce/rf.o
  CC [M]  /home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192ce/dm.o
  LD [M]  /home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192ce/rtl8192ce.o
  Building modules, stage 2.
  MODPOST 1 modules
  CC      /home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192ce/rtl8192ce.mod.o
  LD [M]  /home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192ce/rtl8192ce.ko
make[2]: `/usr/src/linux-headers-3.5.0-23-generic' dizininden çıkılıyor
make[1]: `/home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192ce' dizininden çıkılıyor
make[1]:`/home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192se' dizinine giriliyor
make -C /lib/modules/3.5.0-23-generic/build M=/home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192se modules
make[2]:`/usr/src/linux-headers-3.5.0-23-generic' dizinine giriliyor
  CC [M]  /home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192se/hw.o
  CC [M]  /home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192se/table.o
  CC [M]  /home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192se/sw.o
/home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192se/sw.c: '__check_swenc' fonksiyonunda:
/home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192se/sw.c:383:1: UYARI: uyumsuz gösterici türünde dönüş değeri [enabled by default]
  CC [M]  /home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192se/trx.o
  CC [M]  /home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192se/led.o
  CC [M]  /home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192se/fw.o
  CC [M]  /home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192se/phy.o
  CC [M]  /home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192se/rf.o
  CC [M]  /home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192se/dm.o
  LD [M]  /home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192se/rtl8192se.o
  Building modules, stage 2.
  MODPOST 1 modules
  CC      /home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192se/rtl8192se.mod.o
  LD [M]  /home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192se/rtl8192se.ko
make[2]: `/usr/src/linux-headers-3.5.0-23-generic' dizininden çıkılıyor
make[1]: `/home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192se' dizininden çıkılıyor
make[1]:`/home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192de' dizinine giriliyor
make -C /lib/modules/3.5.0-23-generic/build M=/home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192de modules
make[2]:`/usr/src/linux-headers-3.5.0-23-generic' dizinine giriliyor
  CC [M]  /home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192de/hw.o
  CC [M]  /home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192de/table.o
  CC [M]  /home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192de/sw.o
/home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192de/sw.c: '__check_swenc' fonksiyonunda:
/home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192de/sw.c:372:1: UYARI: uyumsuz gösterici türünde dönüş değeri [enabled by default]
  CC [M]  /home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192de/trx.o
  CC [M]  /home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192de/led.o
  CC [M]  /home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192de/fw.o
  CC [M]  /home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192de/phy.o
  CC [M]  /home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192de/rf.o
  CC [M]  /home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192de/dm.o
  LD [M]  /home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192de/rtl8192de.o
  Building modules, stage 2.
  MODPOST 1 modules
  CC      /home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192de/rtl8192de.mod.o
  LD [M]  /home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192de/rtl8192de.ko
make[2]: `/usr/src/linux-headers-3.5.0-23-generic' dizininden çıkılıyor
make[1]: `/home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192de' dizininden çıkılıyor
neo@Zion:~/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011$ sudo make install
make -C /lib/modules/3.5.0-23-generic/build M=/home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011 modules
make[1]:`/usr/src/linux-headers-3.5.0-23-generic' dizinine giriliyor
  Building modules, stage 2.
  MODPOST 1 modules
make[1]: `/usr/src/linux-headers-3.5.0-23-generic' dizininden çıkılıyor
make[1]:`/home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192ce' dizinine giriliyor
make -C /lib/modules/3.5.0-23-generic/build M=/home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192ce modules
make[2]:`/usr/src/linux-headers-3.5.0-23-generic' dizinine giriliyor
  Building modules, stage 2.
  MODPOST 1 modules
make[2]: `/usr/src/linux-headers-3.5.0-23-generic' dizininden çıkılıyor
make[1]: `/home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192ce' dizininden çıkılıyor
make[1]:`/home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192se' dizinine giriliyor
make -C /lib/modules/3.5.0-23-generic/build M=/home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192se modules
make[2]:`/usr/src/linux-headers-3.5.0-23-generic' dizinine giriliyor
  Building modules, stage 2.
  MODPOST 1 modules
make[2]: `/usr/src/linux-headers-3.5.0-23-generic' dizininden çıkılıyor
make[1]: `/home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192se' dizininden çıkılıyor
make[1]:`/home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192de' dizinine giriliyor
make -C /lib/modules/3.5.0-23-generic/build M=/home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192de modules
make[2]:`/usr/src/linux-headers-3.5.0-23-generic' dizinine giriliyor
  Building modules, stage 2.
  MODPOST 1 modules
make[2]: `/usr/src/linux-headers-3.5.0-23-generic' dizininden çıkılıyor
make[1]: `/home/neo/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011/rtl8192de' dizininden çıkılıyor
find /lib/modules/3.5.0-23-generic -name "r8192se_*.ko" -exec rm {} \;
find /lib/modules/3.5.0-23-generic -name "r8192ce_*.ko" -exec rm {} \;
neo@Zion:~/Masaüstü/rtl_92ce_92se_92de_linux_mac80211_0005.1230.2011$ reboot




El ile yeniden başlattım.Şuan daha iyi bir  internetim var.Speedtest.net'de ulaşabileceğim maksimum hıza ulaşabiliyorum ve 1000'in altında olmayan pingim 20-30 arasına düştü.Teşekkür ederim sizlere umarım aynı yeterliliğe ulaşıp bende linux adına birşeyler yapabilirim. :)

heartsmagic

#9
09 Şubat 2013 - 23:50:57
Zamanla hepsini yapabilirsin @Salvo, biraz sistemi tanımaya bak sen şu sıralar :)
Çözülen başlıklarımız için: cozuldukonusu
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?

Böylece yalan, dünyanın düzenine dönüştürülüyor.
Yazdır
Yukarı git Sayfa1
Kullanıcı Eylemleri