Xubuntu da kablosuz klavye sorunu

Başlatan agritux, 27 Nisan 2013 - 12:21:26

« önceki - sonraki »

0 Üyeler ve 1 Ziyaretçi konuyu incelemekte.

Yazdır
Aşağı git Sayfa1
Kullanıcı Eylemleri

agritux

27 Nisan 2013 - 12:21:26 Son düzenlenme: 27 Nisan 2013 - 15:27:31 agritux
Ubuntu (13.04) 'dan (ekran kartım açısından) memnun kalmamın ardından, favorilerim içerisinde yer alan xfce masaüstü ortamını barındıran Xubuntu için temiz bir kurulum yaptım.

Fakat ilk başta anlayamadığım, saatlerce beni uğraştıran, herşeyin normal görünmesine rağmen normal olmadığını sandığım bir problemi farkettim.

Diz üstü bilgisayarım ile bir kablosuz klavye kullanmaktayım. Bilgisayar açıldıktan sonra klavye ingilizce dizilimi ile çalışıyor. Ama dizüstünün tümleşik klavyesi ile herhangi bir tuşa bastıktan sonra kablosuz klavyeyi kullanmaya devam edersem, Türkçe dizilimde çalışmaya devam ediyor.

Hani çok büyük bir problem değil, ama sistem açılışında şifre girerken bilgisayarı açamamama sebep oldu bu sorun.
Bir şekilde açtıktan sonra, kablosuz klavyeyi unutup dizüstü tümleşik klavyesi ile yazmaya başlayınca farkettim bu durumu :)

Ne yapabiliriz?

Şurada: http://ubuntuforums.org/showthread.php?t=1742765
bir çözüm var, ama ben ne yazmam gerektiğini pek bilemedim.


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 27 Nisan 2013 - 15:27:31

Malesef ubuntuda bulduğumu xubuntuda bulamadım. Benim için hüsran oldu. Tabi dağıtımın iki gün önce duyurulmuş olduğunu göz ardı etmemek gerek.
Birçok hata ile karşılaştım. Sanırım ubuntuya geri döneceğim. Ve pusuya yatıp xubuntunun kararlı olmasını bekleyeceğim :)

if

#1
27 Nisan 2013 - 22:17:56
@agritux,
Kod Seç
gksudo keafpad /etc/default/keybord içine
Kod Seç
XKBMODEL="pc105"
XKBLAYOUT="tr" olarak değiştirip deneyebilirsiniz.

agritux

#2
27 Nisan 2013 - 22:34:10
@if, zaten mevcut

Kod Seç
arda@agritux:~$ cat /etc/default/keyboard
# Check /usr/share/doc/keyboard-configuration/README.Debian for
# documentation on what to do after having modified this file.

# The following variables describe your keyboard and can have the same
# values as the XkbModel, XkbLayout, XkbVariant and XkbOptions options
# in /etc/X11/xorg.conf.

XKBMODEL="pc105"
XKBLAYOUT="tr"
XKBVARIANT=""
XKBOPTIONS=""

# If you don't want to use the XKB layout on the console, you can
# specify an alternative keymap.  Make sure it will be accessible
# before /usr is mounted.
# KMAP=/etc/console-setup/defkeymap.kmap.gz

if

#3
27 Nisan 2013 - 23:28:00
Kod Seç
cat /var/log/Xorg.0.log
dmesg | grep -i keyboard çıktılarına bakayım @agritux.

agritux

#4
27 Nisan 2013 - 23:32:43
@if çıktılar aşağıda. Belirtmek istiyorum. Sistem bir bütün olarak klavye düzeni normal. Sadece kablosuz klavye, sistemin kendi klavyesinden herhangi bir tuşa basana kadar ingilizce dizilim ile çalışıyor. Sistemin kendi klavyesinden herhangi bir tuşa bastıktan sonra Türkçe olarak çalışmaya devam ediyor.

Kod Seç
arda@agritux:~$ dmesg | grep -i keyboard
[    0.542680] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.727630] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4007] on usb-0000:00:1d.0-1.5:1
[    1.729429] logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4004] on usb-0000:00:1d.0-1.5:2


Kod Seç

arda@agritux:~$ cat /var/log/Xorg.0.log
[    15.406]
X.Org X Server 1.13.3
Release Date: 2013-03-07
[    15.406] X Protocol Version 11, Revision 0
[    15.406] Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu
[    15.406] Current Operating System: Linux agritux 3.8.0-19-generic #29-Ubuntu SMP Wed Apr 17 18:16:28 UTC 2013 x86_64
[    15.406] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic root=UUID=da97fdfb-4a77-4cb8-bd71-e5d6a29923de ro quiet splash
[    15.406] Build Date: 17 April 2013  10:43:13PM
[    15.406] xorg-server 2:1.13.3-0ubuntu6 (For technical support please see http://www.ubuntu.com/support)
[    15.406] Current version of pixman: 0.28.2
[    15.406]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    15.406] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    15.406] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Apr 27 23:06:48 2013
[    15.541] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    15.633] (==) No Layout section.  Using the first Screen section.
[    15.634] (==) No screen section available. Using defaults.
[    15.634] (**) |-->Screen "Default Screen Section" (0)
[    15.634] (**) |   |-->Monitor "<default monitor>"
[    15.634] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[    15.634] (==) Automatically adding devices
[    15.634] (==) Automatically enabling devices
[    15.634] (==) Automatically adding GPU devices
[    15.797] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    15.797]     Entry deleted from font path.
[    15.797] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    15.797]     Entry deleted from font path.
[    15.797] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    15.797]     Entry deleted from font path.
[    15.805] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    15.805]     Entry deleted from font path.
[    15.805] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    15.805]     Entry deleted from font path.
[    15.805] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    15.805]     Entry deleted from font path.
[    15.805] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/Type1,
    built-ins
[    15.805] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    15.805] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    15.852] (II) Loader magic: 0x7f30f4538d20
[    15.852] (II) Module ABI versions:
[    15.852]     X.Org ANSI C Emulation: 0.4
[    15.852]     X.Org Video Driver: 13.1
[    15.852]     X.Org XInput driver : 18.0
[    15.852]     X.Org Server Extension : 7.0
[    15.852] (II) config/udev: Adding drm device (/dev/dri/card0)
[    15.853] (--) PCI:*(0:0:2:0) 8086:0116:144d:c606 rev 9, Mem @ 0xe1000000/4194304, 0xd0000000/268435456, I/O @ 0x00004000/64
[    15.853] (--) PCI: (0:1:0:0) 10de:1051:144d:c606 rev 161, Mem @ 0xe0000000/16777216, 0xb0000000/268435456, 0xc0000000/33554432, I/O @ 0x00003000/128
[    15.853] (II) Open ACPI successful (/var/run/acpid.socket)
[    15.964] Initializing built-in extension Generic Event Extension
[    15.964] Initializing built-in extension SHAPE
[    15.964] Initializing built-in extension MIT-SHM
[    15.964] Initializing built-in extension XInputExtension
[    15.964] Initializing built-in extension XTEST
[    15.964] Initializing built-in extension BIG-REQUESTS
[    15.964] Initializing built-in extension SYNC
[    15.964] Initializing built-in extension XKEYBOARD
[    15.964] Initializing built-in extension XC-MISC
[    15.964] Initializing built-in extension SECURITY
[    15.964] Initializing built-in extension XINERAMA
[    15.964] Initializing built-in extension XFIXES
[    15.964] Initializing built-in extension RENDER
[    15.964] Initializing built-in extension RANDR
[    15.964] Initializing built-in extension COMPOSITE
[    15.964] Initializing built-in extension DAMAGE
[    15.964] Initializing built-in extension MIT-SCREEN-SAVER
[    15.964] Initializing built-in extension DOUBLE-BUFFER
[    15.964] Initializing built-in extension RECORD
[    15.964] Initializing built-in extension DPMS
[    15.964] Initializing built-in extension X-Resource
[    15.964] Initializing built-in extension XVideo
[    15.964] Initializing built-in extension XVideo-MotionCompensation
[    15.964] Initializing built-in extension SELinux
[    15.964] Initializing built-in extension XFree86-VidModeExtension
[    15.964] Initializing built-in extension XFree86-DGA
[    15.964] Initializing built-in extension XFree86-DRI
[    15.964] Initializing built-in extension DRI2
[    15.964] (II) LoadModule: "glx"
[    16.167] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    16.219] (II) Module glx: vendor="X.Org Foundation"
[    16.219]     compiled for 1.13.3, module version = 1.0.0
[    16.219]     ABI class: X.Org Server Extension, version 7.0
[    16.219] (==) AIGLX enabled
[    16.230] Loading extension GLX
[    16.230] (==) Matched intel as autoconfigured driver 0
[    16.230] (==) Matched intel as autoconfigured driver 1
[    16.230] (==) Matched vesa as autoconfigured driver 2
[    16.230] (==) Matched modesetting as autoconfigured driver 3
[    16.230] (==) Matched fbdev as autoconfigured driver 4
[    16.230] (==) Assigned the driver to the xf86ConfigLayout
[    16.230] (II) LoadModule: "intel"
[    16.230] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    16.404] (II) Module intel: vendor="X.Org Foundation"
[    16.404]     compiled for 1.13.3, module version = 2.21.6
[    16.404]     Module class: X.Org Video Driver
[    16.404]     ABI class: X.Org Video Driver, version 13.1
[    16.404] (II) LoadModule: "vesa"
[    16.404] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    16.436] (II) Module vesa: vendor="X.Org Foundation"
[    16.436]     compiled for 1.12.99.902, module version = 2.3.2
[    16.436]     Module class: X.Org Video Driver
[    16.436]     ABI class: X.Org Video Driver, version 13.0
[    16.436] (II) LoadModule: "modesetting"
[    16.436] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    16.476] (II) Module modesetting: vendor="X.Org Foundation"
[    16.476]     compiled for 1.13.3, module version = 0.7.0
[    16.476]     Module class: X.Org Video Driver
[    16.476]     ABI class: X.Org Video Driver, version 13.1
[    16.476] (II) LoadModule: "fbdev"
[    16.476] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    16.513] (II) Module fbdev: vendor="X.Org Foundation"
[    16.513]     compiled for 1.12.99.902, module version = 0.4.3
[    16.513]     Module class: X.Org Video Driver
[    16.513]     ABI class: X.Org Video Driver, version 13.0
[    16.513] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
    Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
    Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
    Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
    Haswell Server (GT2+), Haswell SDV Desktop (GT1),
    Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
    Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
    Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
    Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
    Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
    Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
    Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
    Haswell ULT Server (GT1), Haswell ULT Server (GT2),
    Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
    Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
    Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
    Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
    Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
    ValleyView PO board
[    16.513] (II) VESA: driver for VESA chipsets: vesa
[    16.513] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    16.513] (II) FBDEV: driver for framebuffer: fbdev
[    16.513] (++) using VT number 7

[    16.520] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.21.6-0ubuntu4 (Bryce Harrington <bryce@ubuntu.com>)
[    16.522] (WW) Falling back to old probe method for vesa
[    16.522] (WW) Falling back to old probe method for modesetting
[    16.522] (WW) Falling back to old probe method for fbdev
[    16.522] (II) Loading sub module "fbdevhw"
[    16.522] (II) LoadModule: "fbdevhw"
[    16.522] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    16.540] (II) Module fbdevhw: vendor="X.Org Foundation"
[    16.540]     compiled for 1.13.3, module version = 0.0.2
[    16.540]     ABI class: X.Org Video Driver, version 13.1
[    16.540] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[    16.540] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    16.540] (==) intel(0): RGB weight 888
[    16.540] (==) intel(0): Default visual is TrueColor
[    16.540] (--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2)
[    16.541] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[    16.541] (**) intel(0): Framebuffer tiled
[    16.541] (**) intel(0): Pixmaps tiled
[    16.541] (**) intel(0): "Tear free" disabled
[    16.541] (**) intel(0): Forcing per-crtc-pixmaps? no
[    16.541] (II) intel(0): Output LVDS1 has no monitor section
[    16.541] (--) intel(0): found backlight control interface acpi_video1 (type 'firmware')
[    16.560] (II) intel(0): Output VGA1 has no monitor section
[    16.576] (II) intel(0): Output HDMI1 has no monitor section
[    16.624] (II) intel(0): Output DP1 has no monitor section
[    16.624] (II) intel(0): EDID for output LVDS1
[    16.624] (II) intel(0): Manufacturer: SEC  Model: 324a  Serial#: 0
[    16.624] (II) intel(0): Year: 2011  Week: 0
[    16.624] (II) intel(0): EDID Version: 1.3
[    16.624] (II) intel(0): Digital Display Input
[    16.624] (II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    16.624] (II) intel(0): Gamma: 2.20
[    16.624] (II) intel(0): No DPMS capabilities specified
[    16.624] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    16.624] (II) intel(0): First detailed timing is preferred mode
[    16.624] (II) intel(0): redX: 0.570 redY: 0.340   greenX: 0.330 greenY: 0.560
[    16.624] (II) intel(0): blueX: 0.160 blueY: 0.135   whiteX: 0.313 whiteY: 0.329
[    16.624] (II) intel(0): Manufacturer's mask: 0
[    16.624] (II) intel(0): Supported detailed timing:
[    16.624] (II) intel(0): clock: 70.7 MHz   Image Size:  344 x 194 mm
[    16.624] (II) intel(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1486 h_border: 0
[    16.624] (II) intel(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 792 v_border: 0
[    16.624] (II) intel(0): Unknown vendor-specific block f
[    16.624] (II) intel(0):  SAMSUNG
[    16.624] (II) intel(0):  LTN156AT190
[    16.624] (II) intel(0): EDID (in hex):
[    16.624] (II) intel(0):     00ffffffffffff004ca34a3200000000
[    16.624] (II) intel(0):     00150103802213780a09259257548f29
[    16.624] (II) intel(0):     22505400000001010101010101010101
[    16.624] (II) intel(0):     0101010101019e1b5678500018303020
[    16.624] (II) intel(0):     250058c2100000190000000f00000000
[    16.624] (II) intel(0):     00000000002387026401000000fe0053
[    16.624] (II) intel(0):     414d53554e470a2020202020000000fe
[    16.624] (II) intel(0):     004c544e31353641543139300a2000b4
[    16.624] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    16.624] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    16.624] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    16.624] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    16.624] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    16.624] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    16.624] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    16.624] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    16.624] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    16.624] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    16.624] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[    16.624] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    16.624] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    16.624] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    16.624] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[    16.624] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[    16.624] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    16.624] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    16.624] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[    16.624] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[    16.624] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    16.624] (II) intel(0): Printing probed modes for output LVDS1
[    16.624] (II) intel(0): Modeline "1366x768"x60.1   70.70  1366 1414 1446 1486  768 770 775 792 -hsync -vsync (47.6 kHz eP)
[    16.624] (II) intel(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[    16.624] (II) intel(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[    16.624] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    16.624] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    16.624] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    16.624] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    16.640] (II) intel(0): EDID for output VGA1
[    16.656] (II) intel(0): EDID for output HDMI1
[    16.704] (II) intel(0): EDID for output DP1
[    16.704] (II) intel(0): Output LVDS1 connected
[    16.704] (II) intel(0): Output VGA1 disconnected
[    16.704] (II) intel(0): Output HDMI1 disconnected
[    16.704] (II) intel(0): Output DP1 disconnected
[    16.704] (II) intel(0): Using exact sizes for initial modes
[    16.704] (II) intel(0): Output LVDS1 using initial mode 1366x768
[    16.704] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    16.704] (==) intel(0): DPI set to (96, 96)
[    16.704] (II) Loading sub module "dri2"
[    16.704] (II) LoadModule: "dri2"
[    16.704] (II) Module "dri2" already built-in
[    16.704] (II) UnloadModule: "vesa"
[    16.704] (II) Unloading vesa
[    16.704] (II) UnloadModule: "modesetting"
[    16.704] (II) Unloading modesetting
[    16.704] (II) UnloadModule: "fbdev"
[    16.704] (II) Unloading fbdev
[    16.704] (II) UnloadSubModule: "fbdevhw"
[    16.704] (II) Unloading fbdevhw
[    16.704] (==) Depth 24 pixmap format is 32 bpp
[    16.709] (II) intel(0): SNA initialized with SandyBridge backend
[    16.709] (==) intel(0): Backing store disabled
[    16.709] (==) intel(0): Silken mouse enabled
[    16.709] (II) intel(0): HW Cursor enabled
[    16.709] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    16.710] (==) intel(0): DPMS enabled
[    16.710] (II) intel(0): [DRI2] Setup complete
[    16.710] (II) intel(0): [DRI2]   DRI driver: i965
[    16.710] (II) intel(0): direct rendering: DRI2 Enabled
[    16.710] (==) intel(0): hotplug detection: "enabled"
[    16.710] (--) RandR disabled
[    16.714] (II) SELinux: Disabled on system
[    16.853] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    16.853] (II) AIGLX: enabled GLX_INTEL_swap_event
[    16.853] (II) AIGLX: enabled GLX_ARB_create_context
[    16.853] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    16.853] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    16.853] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    16.853] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    16.854] (II) AIGLX: Loaded and initialized i965
[    16.854] (II) GLX: Initialized DRI2 GL provider for screen 0
[    16.854] (II) intel(0): switch to mode 1366x768 on crtc 3 (pipe 0)
[    16.864] (II) intel(0): Setting screen physical size to 361 x 203
[    16.945] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    16.954] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    16.954] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    16.954] (II) LoadModule: "evdev"
[    16.955] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    17.013] (II) Module evdev: vendor="X.Org Foundation"
[    17.013]     compiled for 1.13.3, module version = 2.7.3
[    17.013]     Module class: X.Org XInput Driver
[    17.013]     ABI class: X.Org XInput driver, version 18.0
[    17.013] (II) Using input driver 'evdev' for 'Power Button'
[    17.013] (**) Power Button: always reports core events
[    17.013] (**) evdev: Power Button: Device: "/dev/input/event2"
[    17.013] (--) evdev: Power Button: Vendor 0 Product 0x1
[    17.013] (--) evdev: Power Button: Found keys
[    17.013] (II) evdev: Power Button: Configuring as keyboard
[    17.013] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    17.013] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    17.013] (**) Option "xkb_rules" "evdev"
[    17.013] (**) Option "xkb_model" "pc105"
[    17.013] (**) Option "xkb_layout" "tr"
[    17.015] (II) XKB: reuse xkmfile /var/lib/xkb/server-609880D4F1521A95A29BCD7AB1227A69EC9A1B72.xkm
[    17.034] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[    17.034] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    17.034] (II) Using input driver 'evdev' for 'Video Bus'
[    17.034] (**) Video Bus: always reports core events
[    17.034] (**) evdev: Video Bus: Device: "/dev/input/event9"
[    17.034] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    17.034] (--) evdev: Video Bus: Found keys
[    17.034] (II) evdev: Video Bus: Configuring as keyboard
[    17.034] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input9/event9"
[    17.034] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    17.034] (**) Option "xkb_rules" "evdev"
[    17.034] (**) Option "xkb_model" "pc105"
[    17.034] (**) Option "xkb_layout" "tr"
[    17.034] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[    17.034] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    17.034] (II) Using input driver 'evdev' for 'Video Bus'
[    17.034] (**) Video Bus: always reports core events
[    17.034] (**) evdev: Video Bus: Device: "/dev/input/event8"
[    17.034] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    17.034] (--) evdev: Video Bus: Found keys
[    17.034] (II) evdev: Video Bus: Configuring as keyboard
[    17.034] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2b/LNXVIDEO:00/input/input8/event8"
[    17.034] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id
[    17.034] (**) Option "xkb_rules" "evdev"
[    17.034] (**) Option "xkb_model" "pc105"
[    17.034] (**) Option "xkb_layout" "tr"
[    17.035] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    17.035] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    17.035] (II) Using input driver 'evdev' for 'Power Button'
[    17.035] (**) Power Button: always reports core events
[    17.035] (**) evdev: Power Button: Device: "/dev/input/event1"
[    17.035] (--) evdev: Power Button: Vendor 0 Product 0x1
[    17.035] (--) evdev: Power Button: Found keys
[    17.035] (II) evdev: Power Button: Configuring as keyboard
[    17.035] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[    17.035] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[    17.035] (**) Option "xkb_rules" "evdev"
[    17.035] (**) Option "xkb_model" "pc105"
[    17.035] (**) Option "xkb_layout" "tr"
[    17.035] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    17.035] (II) No input driver specified, ignoring this device.
[    17.035] (II) This device may have been added with another device file.
[    17.035] (II) config/udev: Adding drm device (/dev/dri/card0) card0 /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[    17.035] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[    17.035] (II) config/udev: Adding input device WebCam SC-0311139N (/dev/input/event6)
[    17.035] (**) WebCam SC-0311139N: Applying InputClass "evdev keyboard catchall"
[    17.035] (II) Using input driver 'evdev' for 'WebCam SC-0311139N'
[    17.035] (**) WebCam SC-0311139N: always reports core events
[    17.035] (**) evdev: WebCam SC-0311139N: Device: "/dev/input/event6"
[    17.035] (--) evdev: WebCam SC-0311139N: Vendor 0x2232 Product 0x1020
[    17.035] (--) evdev: WebCam SC-0311139N: Found keys
[    17.035] (II) evdev: WebCam SC-0311139N: Configuring as keyboard
[    17.035] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input6/event6"
[    17.035] (II) XINPUT: Adding extended input device "WebCam SC-0311139N" (type: KEYBOARD, id 10)
[    17.035] (**) Option "xkb_rules" "evdev"
[    17.035] (**) Option "xkb_model" "pc105"
[    17.035] (**) Option "xkb_layout" "tr"
[    17.036] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[    17.036] (II) No input driver specified, ignoring this device.
[    17.036] (II) This device may have been added with another device file.
[    17.036] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11)
[    17.036] (II) No input driver specified, ignoring this device.
[    17.036] (II) This device may have been added with another device file.
[    17.036] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[    17.036] (II) No input driver specified, ignoring this device.
[    17.036] (II) This device may have been added with another device file.
[    17.036] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4007 (/dev/input/event4)
[    17.036] (**) Logitech Unifying Device. Wireless PID:4007: Applying InputClass "evdev pointer catchall"
[    17.036] (**) Logitech Unifying Device. Wireless PID:4007: Applying InputClass "evdev keyboard catchall"
[    17.036] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4007'
[    17.036] (**) Logitech Unifying Device. Wireless PID:4007: always reports core events
[    17.036] (**) evdev: Logitech Unifying Device. Wireless PID:4007: Device: "/dev/input/event4"
[    17.036] (--) evdev: Logitech Unifying Device. Wireless PID:4007: Vendor 0x46d Product 0xc52b
[    17.036] (--) evdev: Logitech Unifying Device. Wireless PID:4007: Found 20 mouse buttons
[    17.036] (--) evdev: Logitech Unifying Device. Wireless PID:4007: Found scroll wheel(s)
[    17.036] (--) evdev: Logitech Unifying Device. Wireless PID:4007: Found relative axes
[    17.036] (--) evdev: Logitech Unifying Device. Wireless PID:4007: Found x and y relative axes
[    17.036] (--) evdev: Logitech Unifying Device. Wireless PID:4007: Found absolute axes
[    17.036] (II) evdev: Logitech Unifying Device. Wireless PID:4007: Forcing absolute x/y axes to exist.
[    17.036] (--) evdev: Logitech Unifying Device. Wireless PID:4007: Found keys
[    17.036] (II) evdev: Logitech Unifying Device. Wireless PID:4007: Configuring as mouse
[    17.036] (II) evdev: Logitech Unifying Device. Wireless PID:4007: Configuring as keyboard
[    17.036] (II) evdev: Logitech Unifying Device. Wireless PID:4007: Adding scrollwheel support
[    17.036] (**) evdev: Logitech Unifying Device. Wireless PID:4007: YAxisMapping: buttons 4 and 5
[    17.036] (**) evdev: Logitech Unifying Device. Wireless PID:4007: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    17.036] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.2/0003:046D:C52B.0003/input/input4/event4"
[    17.036] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:4007" (type: KEYBOARD, id 11)
[    17.036] (**) Option "xkb_rules" "evdev"
[    17.036] (**) Option "xkb_model" "pc105"
[    17.036] (**) Option "xkb_layout" "tr"
[    17.037] (II) evdev: Logitech Unifying Device. Wireless PID:4007: initialized for relative axes.
[    17.037] (WW) evdev: Logitech Unifying Device. Wireless PID:4007: ignoring absolute axes.
[    17.037] (**) Logitech Unifying Device. Wireless PID:4007: (accel) keeping acceleration scheme 1
[    17.037] (**) Logitech Unifying Device. Wireless PID:4007: (accel) acceleration profile 0
[    17.037] (**) Logitech Unifying Device. Wireless PID:4007: (accel) acceleration factor: 2.000
[    17.037] (**) Logitech Unifying Device. Wireless PID:4007: (accel) acceleration threshold: 4
[    17.037] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4007 (/dev/input/mouse0)
[    17.037] (II) No input driver specified, ignoring this device.
[    17.037] (II) This device may have been added with another device file.
[    17.037] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4004 (/dev/input/event5)
[    17.037] (**) Logitech Unifying Device. Wireless PID:4004: Applying InputClass "evdev keyboard catchall"
[    17.037] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:4004'
[    17.037] (**) Logitech Unifying Device. Wireless PID:4004: always reports core events
[    17.037] (**) evdev: Logitech Unifying Device. Wireless PID:4004: Device: "/dev/input/event5"
[    17.037] (--) evdev: Logitech Unifying Device. Wireless PID:4004: Vendor 0x46d Product 0xc52b
[    17.037] (--) evdev: Logitech Unifying Device. Wireless PID:4004: Found 1 mouse buttons
[    17.037] (--) evdev: Logitech Unifying Device. Wireless PID:4004: Found scroll wheel(s)
[    17.037] (--) evdev: Logitech Unifying Device. Wireless PID:4004: Found relative axes
[    17.037] (II) evdev: Logitech Unifying Device. Wireless PID:4004: Forcing relative x/y axes to exist.
[    17.037] (--) evdev: Logitech Unifying Device. Wireless PID:4004: Found absolute axes
[    17.037] (II) evdev: Logitech Unifying Device. Wireless PID:4004: Forcing absolute x/y axes to exist.
[    17.037] (--) evdev: Logitech Unifying Device. Wireless PID:4004: Found keys
[    17.037] (II) evdev: Logitech Unifying Device. Wireless PID:4004: Configuring as mouse
[    17.037] (II) evdev: Logitech Unifying Device. Wireless PID:4004: Configuring as keyboard
[    17.037] (II) evdev: Logitech Unifying Device. Wireless PID:4004: Adding scrollwheel support
[    17.037] (**) evdev: Logitech Unifying Device. Wireless PID:4004: YAxisMapping: buttons 4 and 5
[    17.037] (**) evdev: Logitech Unifying Device. Wireless PID:4004: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    17.037] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.2/0003:046D:C52B.0003/input/input5/event5"
[    17.037] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:4004" (type: KEYBOARD, id 12)
[    17.037] (**) Option "xkb_rules" "evdev"
[    17.037] (**) Option "xkb_model" "pc105"
[    17.037] (**) Option "xkb_layout" "tr"
[    17.037] (II) evdev: Logitech Unifying Device. Wireless PID:4004: initialized for relative axes.
[    17.037] (WW) evdev: Logitech Unifying Device. Wireless PID:4004: ignoring absolute axes.
[    17.038] (**) Logitech Unifying Device. Wireless PID:4004: (accel) keeping acceleration scheme 1
[    17.038] (**) Logitech Unifying Device. Wireless PID:4004: (accel) acceleration profile 0
[    17.038] (**) Logitech Unifying Device. Wireless PID:4004: (accel) acceleration factor: 2.000
[    17.038] (**) Logitech Unifying Device. Wireless PID:4004: (accel) acceleration threshold: 4
[    17.038] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    17.038] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    17.038] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    17.038] (**) AT Translated Set 2 keyboard: always reports core events
[    17.038] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[    17.038] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    17.038] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    17.038] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    17.038] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    17.038] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[    17.038] (**) Option "xkb_rules" "evdev"
[    17.038] (**) Option "xkb_model" "pc105"
[    17.038] (**) Option "xkb_layout" "tr"
[    17.038] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event7)
[    17.038] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[    17.038] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[    17.038] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[    17.038] (II) LoadModule: "synaptics"
[    17.038] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    17.089] (II) Module synaptics: vendor="X.Org Foundation"
[    17.089]     compiled for 1.13.1.901, module version = 1.6.2
[    17.089]     Module class: X.Org XInput Driver
[    17.089]     ABI class: X.Org XInput driver, version 18.0
[    17.089] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[    17.089] (**) ETPS/2 Elantech Touchpad: always reports core events
[    17.089] (**) Option "Device" "/dev/input/event7"
[    17.128] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2940
[    17.128] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1400
[    17.128] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[    17.128] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[    17.128] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[    17.128] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[    17.128] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    17.128] (**) ETPS/2 Elantech Touchpad: always reports core events
[    17.136] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event7"
[    17.136] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 14)
[    17.136] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[    17.136] (**) synaptics: ETPS/2 Elantech Touchpad: MaxSpeed is now 1.75
[    17.136] (**) synaptics: ETPS/2 Elantech Touchpad: AccelFactor is now 0.061
[    17.136] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[    17.136] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[    17.136] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[    17.136] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[    17.136] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    17.136] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[    17.136] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[    71.837] (II) intel(0): EDID vendor "SEC", prod id 12874
[    71.837] (II) intel(0): Printing DDC gathered Modelines:
[    71.837] (II) intel(0): Modeline "1366x768"x0.0   70.70  1366 1414 1446 1486  768 770 775 792 -hsync -vsync (47.6 kHz eP)
[    71.916] (II) intel(0): EDID vendor "SEC", prod id 12874
[    71.916] (II) intel(0): Printing DDC gathered Modelines:
[    71.916] (II) intel(0): Modeline "1366x768"x0.0   70.70  1366 1414 1446 1486  768 770 775 792 -hsync -vsync (47.6 kHz eP)
[    72.432] (II) intel(0): EDID vendor "SEC", prod id 12874
[    72.432] (II) intel(0): Printing DDC gathered Modelines:
[    72.432] (II) intel(0): Modeline "1366x768"x0.0   70.70  1366 1414 1446 1486  768 770 775 792 -hsync -vsync (47.6 kHz eP)
arda@agritux:~$

if

#5
28 Nisan 2013 - 00:07:08
@agritux,
Kod Seç
gksudo leafpad /etc/X11/xorg.conf.d/01-keyboard.conf içine
Kod Seç
Section "InputClass"
     Identifier "keyboard-layout"
     Driver "evdev"
     MatchIsKeyboard "yes"
     Option "XkbLayout" "tr"
EndSeciton yazıp kaydedin ve yeniden başlatarak deneyin.

agritux

#6
28 Nisan 2013 - 10:58:33 Son düzenlenme: 28 Nisan 2013 - 12:55:07 agritux
Dizin de yoktu, doğal olarak dosya da. Oluşturdum ve yeniden başlattım. Açılmadı bilgisayar. İşin garibi dondu. Hiçbir tuş çalışmadı. Kurtarma modunda root a düştüğümde silemedi. Salt okunur dedi root olmasına karşın. Bende taktım canlı cd yi sildim. Açıldı :)


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 28 Nisan 2013 - 12:55:07

Ubuntu kurulumu yaptım. Bu cephede sorun yok. İlginiz için çok teşekkür ederim.
Yazdır
Yukarı git Sayfa1
Kullanıcı Eylemleri