[Çözüldü] Bilgisayar geç açılıyor ve geç kapanıyor, Ekran kartından dolayı mı?

Başlatan dokuzyuzon, 25 Haziran 2012 - 12:39:51

« önceki - sonraki »

0 Üyeler ve 1 Ziyaretçi konuyu incelemekte.

dokuzyuzon

Merhaba arkadaşlar, ben yaklaşık 1 haftadır Linux Ubuntu LTS 12.04 kullanıyorum. (Bilgisayarımın Harddiskinde direkt olarak kurulu.) Bilgisayarıma kurulumu ilk yaptığımda canavar gibi çalışıyordu. Yapmış olduğum güncellemelerden sonra oldu büyük ihtimalle; Bilgisayarı kapat dedikten sonra biraz bekliyor, ekran tamamen kapanıyor(Notebook) ancak güç bir türlü kesilmiyor, elle kapatmak zorunda kalıyorum. Bilgisayarı açmaya çalıştığımda ise siyah ekran da (Ekranda hiç * bir şey gözükmüyor) oldukça uzun bir süre bekliyorum(5 yada 6 dakika kadar) Bilgisayar açıldığında hiçbir problem yok sorunsuz şekilde çalışıyor.

Gerek internette gerekse forumlarda bir çok yazı okudum ama herhangi bir şey yapamadım ne de olsa henüz 1 haftalık bir kullanıcıyım. Muhtemel olarak Ekran kartında problem olduğunu düşüneceksiniz ki bende öyle düşünüyorum.

Bunlarda daha sağlıklı yardımcı olmanız için:

lspci

00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 12)
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 12)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06)
00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 06)
00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 06)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 06)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Manhattan [Mobility Radeon HD 5400 Series]
01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Cedar HDMI Audio [Radeon HD 5400/6300 Series]
12:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)
13:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)


Bilgisayarda bulunan Ek sürücüler uygulamasında altta bulunan etkin sürücü yüklü ancak en üstte gözüken(etkin olmayan) sürücü malesef yüklenemiyor.



Sistem Ayrıntılarında Grafik kısmı

burk

@dokuzyuzon çalışan uygulamalara bir bakalım;
top çıktısnı buraya geçin daha sonra;
dmesg > dmesg.log
komutu ile başlangıç klasörüne açılış süreçlerini yazdırın ve içeriğini buraya geçin. Bunlardan sonra ekran kartı üzerine eğiliriz.

dokuzyuzon

$top

  PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND           
4415 emre      20   0 1287m  88m  46m S   19  3.0   1:03.20 compiz             
1093 root      20   0  328m  79m  60m S    6  2.7   0:14.79 Xorg               
12212 emre      20   0  522m  18m  11m S    4  0.6   0:00.52 gnome-terminal     
12279 emre      20   0 17332 1360  968 R    1  0.0   0:00.06 top               
    4 root      20   0     0    0    0 S    0  0.0   0:00.36 kworker/0:0       
    9 root      20   0     0    0    0 S    0  0.0   0:00.32 kworker/1:0       
4388 emre      20   0  740m  18m  12m S    0  0.6   0:00.75 gnome-settings-   
4411 emre      20   0 24072 1720 1292 S    0  0.1   0:00.15 dbus-daemon       
4946 emre      20   0  322m  12m 9544 S    0  0.4   0:00.34 gtk-window-deco   
5052 emre      20   0  590m  79m  36m S    0  2.7   0:17.26 chrome             
6054 emre      20   0  993m 182m  24m S    0  6.2   0:30.59 chrome             
    1 root      20   0 24452 2400 1348 S    0  0.1   0:01.25 init               
    2 root      20   0     0    0    0 S    0  0.0   0:00.00 kthreadd           
    3 root      20   0     0    0    0 S    0  0.0   0:01.17 ksoftirqd/0       
    6 root      RT   0     0    0    0 S    0  0.0   0:00.00 migration/0       
    7 root      RT   0     0    0    0 S    0  0.0   0:00.00 watchdog/0         
    8 root      RT   0     0    0    0 S    0  0.0   0:00.00 migration/1       



dmesg > dmesg.log

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-25-generic (buildd@crested) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #40-Ubuntu SMP Wed May 23 20:30:51 UTC 2012 (Ubuntu 3.2.0-25.40-generic 3.2.18)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-25-generic root=UUID=df2b3902-2038-47dc-bc97-95605324ae0f ro ipv6.disable=1 quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
[    0.000000]  BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bb587000 (usable)
[    0.000000]  BIOS-e820: 00000000bb587000 - 00000000bb5cf000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bb5cf000 - 00000000bb5d9000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bb5d9000 - 00000000bb5dc000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bb5dc000 - 00000000bb621000 (reserved)
[    0.000000]  BIOS-e820: 00000000bb621000 - 00000000bb629000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bb629000 - 00000000bb62c000 (reserved)
[    0.000000]  BIOS-e820: 00000000bb62c000 - 00000000bb631000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bb631000 - 00000000bb651000 (reserved)
[    0.000000]  BIOS-e820: 00000000bb651000 - 00000000bb694000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bb694000 - 00000000bb800000 (usable)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.6 present.
[    0.000000] DMI: Dell Inc. Inspiron N5010/005WC3, BIOS A04 05/10/2010
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0xbb800 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F00000000 write-back
[    0.000000]   1 base 0BC000000 mask FFC000000 uncachable
[    0.000000]   2 base 0C0000000 mask FC0000000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 4GB, type WB
[    0.000000] reg 1, base: 3008MB, range: 64MB, type UC
[    0.000000] reg 2, base: 3GB, range: 1GB, type UC
[    0.000000] total RAM covered: 3008M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K chunk_size: 128M num_reg: 3  lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3008MB, range: 64MB, type UC
[    0.000000] found SMP MP-table at [ffff8800000fcdb0] fcdb0
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-00000000bb800000
[    0.000000]  0000000000 - 00bb800000 page 2M
[    0.000000] kernel direct mapping tables up to bb800000 @ 1fffc000-20000000
[    0.000000] RAMDISK: 364e8000 - 3726c000
[    0.000000] ACPI: RSDP 00000000000f0410 00024 (v03 DELL  )
[    0.000000] ACPI: XSDT 00000000bb5cf088 00064 (v01 DELL    WN09    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 00000000bb5d80a8 000F4 (v04 DELL    WN09    01072009 AMI  00010013)
[    0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20110623/tbfadt-365)
[    0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xBB62CF40/0x00000000BB62CF80, using 32 (20110623/tbfadt-489)
[    0.000000] ACPI: DSDT 00000000bb5cf180 08F27 (v02 DELL    WN09    00005010 INTL 20051117)
[    0.000000] ACPI: FACS 00000000bb62cf40 00040
[    0.000000] ACPI: APIC 00000000bb5d81a0 00072 (v01 DELL   WN09     01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 00000000bb5d8218 0014E (v01 AMICPU     PROC 00000001 MSFT 03000001)
[    0.000000] ACPI: MCFG 00000000bb5d8368 0003C (v01   DELL     WN09 01072009 MSFT 00000097)
[    0.000000] ACPI: SLIC 00000000bb5d83a8 00176 (v01 DELL    WN09    01072009 AMI  00010013)
[    0.000000] ACPI: HPET 00000000bb5d8520 00038 (v01   DELL     WN09 01072009 AMI. 00000003)
[    0.000000] ACPI: UEFI 00000000bb5d8558 00042 (v01 PTL      COMBUF 00000001 PTL  00000001)
[    0.000000] ACPI: OSFR 00000000bb5d85a0 0008C (v01 DELL    M08     07DA050A ASL  00000061)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-00000000bb800000
[    0.000000] Initmem setup node 0 0000000000000000-00000000bb800000
[    0.000000]   NODE_DATA [00000000bb7fb000 - 00000000bb7fffff]
[    0.000000]  [ffffea0000000000-ffffea0002ffffff] PMD -> [ffff8800b7c00000-ffff8800babfffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x000bb587
[    0.000000]     0: 0x000bb694 -> 0x000bb800
[    0.000000] On node 0 totalpages: 767616
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3912 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11936 pages used for memmap
[    0.000000]   DMA32 zone: 751699 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address


Yardım eğiliminiz için teşekkür ederim.

if

@dokuzyuzon, dmesg.log içeriği tam olarak geçmemiş.

Bunun dışında bu bilgisayar Dell Inspiron N5010/005WC3 mü?

Bir de cat /var/log/Xorg.0.log
uname -a
dmesg | grep -E "firmware|failed"
dmesg | grep -i acpi
çıktılarını da alayım.

Bir de sudo shutdown -h now komutuyla gecikme yapmadan kapanıyor mu bilgisayar?

dokuzyuzon

dmesg > dmesg.log

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-25-generic (buildd@crested) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #40-Ubuntu SMP Wed May 23 20:30:51 UTC 2012 (Ubuntu 3.2.0-25.40-generic 3.2.18)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-25-generic root=UUID=df2b3902-2038-47dc-bc97-95605324ae0f ro ipv6.disable=1 quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
[    0.000000]  BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bb587000 (usable)
[    0.000000]  BIOS-e820: 00000000bb587000 - 00000000bb5cf000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bb5cf000 - 00000000bb5d9000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bb5d9000 - 00000000bb5dc000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bb5dc000 - 00000000bb621000 (reserved)
[    0.000000]  BIOS-e820: 00000000bb621000 - 00000000bb629000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bb629000 - 00000000bb62c000 (reserved)
[    0.000000]  BIOS-e820: 00000000bb62c000 - 00000000bb631000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bb631000 - 00000000bb651000 (reserved)
[    0.000000]  BIOS-e820: 00000000bb651000 - 00000000bb694000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bb694000 - 00000000bb800000 (usable)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.6 present.
[    0.000000] DMI: Dell Inc. Inspiron N5010/005WC3, BIOS A04 05/10/2010
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0xbb800 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F00000000 write-back
[    0.000000]   1 base 0BC000000 mask FFC000000 uncachable
[    0.000000]   2 base 0C0000000 mask FC0000000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 4GB, type WB
[    0.000000] reg 1, base: 3008MB, range: 64MB, type UC
[    0.000000] reg 2, base: 3GB, range: 1GB, type UC
[    0.000000] total RAM covered: 3008M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K chunk_size: 128M num_reg: 3  lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3008MB, range: 64MB, type UC
[    0.000000] found SMP MP-table at [ffff8800000fcdb0] fcdb0
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-00000000bb800000
[    0.000000]  0000000000 - 00bb800000 page 2M
[    0.000000] kernel direct mapping tables up to bb800000 @ 1fffc000-20000000
[    0.000000] RAMDISK: 364e8000 - 3726c000
[    0.000000] ACPI: RSDP 00000000000f0410 00024 (v03 DELL  )
[    0.000000] ACPI: XSDT 00000000bb5cf088 00064 (v01 DELL    WN09    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 00000000bb5d80a8 000F4 (v04 DELL    WN09    01072009 AMI  00010013)
[    0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20110623/tbfadt-365)
[    0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xBB62CF40/0x00000000BB62CF80, using 32 (20110623/tbfadt-489)
[    0.000000] ACPI: DSDT 00000000bb5cf180 08F27 (v02 DELL    WN09    00005010 INTL 20051117)
[    0.000000] ACPI: FACS 00000000bb62cf40 00040
[    0.000000] ACPI: APIC 00000000bb5d81a0 00072 (v01 DELL   WN09     01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 00000000bb5d8218 0014E (v01 AMICPU     PROC 00000001 MSFT 03000001)
[    0.000000] ACPI: MCFG 00000000bb5d8368 0003C (v01   DELL     WN09 01072009 MSFT 00000097)
[    0.000000] ACPI: SLIC 00000000bb5d83a8 00176 (v01 DELL    WN09    01072009 AMI  00010013)
[    0.000000] ACPI: HPET 00000000bb5d8520 00038 (v01   DELL     WN09 01072009 AMI. 00000003)
[    0.000000] ACPI: UEFI 00000000bb5d8558 00042 (v01 PTL      COMBUF 00000001 PTL  00000001)
[    0.000000] ACPI: OSFR 00000000bb5d85a0 0008C (v01 DELL    M08     07DA050A ASL  00000061)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-00000000bb800000
[    0.000000] Initmem setup node 0 0000000000000000-00000000bb800000
[    0.000000]   NODE_DATA [00000000bb7fb000 - 00000000bb7fffff]
[    0.000000]  [ffffea0000000000-ffffea0002ffffff] PMD -> [ffff8800b7c00000-ffff8800babfffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x000bb587
[    0.000000]     0: 0x000bb694 -> 0x000bb800
[    0.000000] On node 0 totalpages: 767616
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3912 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11936 pages used for memmap
[    0.000000]   DMA32 zone: 751699 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000bb587000 - 00000000bb5cf000
[    0.000000] PM: Registered nosave memory: 00000000bb5cf000 - 00000000bb5d9000
[    0.000000] PM: Registered nosave memory: 00000000bb5d9000 - 00000000bb5dc000
[    0.000000] PM: Registered nosave memory: 00000000bb5dc000 - 00000000bb621000
[    0.000000] PM: Registered nosave memory: 00000000bb621000 - 00000000bb629000
[    0.000000] PM: Registered nosave memory: 00000000bb629000 - 00000000bb62c000
[    0.000000] PM: Registered nosave memory: 00000000bb62c000 - 00000000bb631000
[    0.000000] PM: Registered nosave memory: 00000000bb631000 - 00000000bb651000
[    0.000000] PM: Registered nosave memory: 00000000bb651000 - 00000000bb694000
[    0.000000] Allocating PCI resources starting at bb800000 (gap: bb800000:24800000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800bb200000 s83072 r8192 d23424 u524288
[    0.000000] pcpu-alloc: s83072 r8192 d23424 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 755611
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-25-generic root=UUID=df2b3902-2038-47dc-bc97-95605324ae0f ro ipv6.disable=1 quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 2991196k/3072000k available (6570k kernel code, 1536k absent, 79268k reserved, 6633k data, 920k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:16640 nr_irqs:712 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 25165824 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.004000] Detected 2260.841 MHz processor.
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4521.68 BogoMIPS (lpj=9043364)
[    0.000007] pid_max: default: 32768 minimum: 301
[    0.000034] Security Framework initialized
[    0.000051] AppArmor: AppArmor initialized
[    0.000052] Yama: becoming mindful.
[    0.000506] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.002167] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.002888] Mount-cache hash table entries: 256
[    0.003034] Initializing cgroup subsys cpuacct
[    0.003039] Initializing cgroup subsys memory
[    0.003047] Initializing cgroup subsys devices
[    0.003050] Initializing cgroup subsys freezer
[    0.003052] Initializing cgroup subsys blkio
[    0.003059] Initializing cgroup subsys perf_event
[    0.003092] CPU: Physical Processor ID: 0
[    0.003093] CPU: Processor Core ID: 0
[    0.003099] mce: CPU supports 9 MCE banks
[    0.003113] CPU0: Thermal monitoring enabled (TM1)
[    0.003147] using mwait in idle threads.
[    0.005792] ACPI: Core revision 20110623
[    0.019685] ftrace: allocating 27073 entries in 107 pages
[    0.029660] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.069264] CPU0: Intel(R) Core(TM) i3 CPU       M 350  @ 2.27GHz stepping 02
[    0.174784] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[    0.174792] ... version:                3
[    0.174794] ... bit width:              48
[    0.174795] ... generic registers:      4
[    0.174797] ... value mask:             0000ffffffffffff
[    0.174798] ... max period:             000000007fffffff
[    0.174800] ... fixed-purpose events:   3
[    0.174801] ... event mask:             000000070000000f
[    0.174984] NMI watchdog enabled, takes one hw-pmu counter.
[    0.175085] Booting Node   0, Processors  #1
[    0.175088] smpboot cpu 1: start_ip = 98000
[    0.282721] NMI watchdog enabled, takes one hw-pmu counter.
[    0.282849]  #2
[    0.282851] smpboot cpu 2: start_ip = 98000
[    0.390467] NMI watchdog enabled, takes one hw-pmu counter.
[    0.390580]  #3 Ok.
[    0.390582] smpboot cpu 3: start_ip = 98000
[    0.498285] NMI watchdog enabled, takes one hw-pmu counter.
[    0.498329] Brought up 4 CPUs
[    0.498331] Total of 4 processors activated (18087.40 BogoMIPS).
[    0.501272] devtmpfs: initialized
[    0.502202] EVM: security.selinux
[    0.502204] EVM: security.SMACK64
[    0.502205] EVM: security.capability
[    0.502234] PM: Registering ACPI NVS region at bb587000 (294912 bytes)
[    0.502243] PM: Registering ACPI NVS region at bb5d9000 (12288 bytes)
[    0.502245] PM: Registering ACPI NVS region at bb621000 (32768 bytes)
[    0.502247] PM: Registering ACPI NVS region at bb62c000 (20480 bytes)
[    0.502249] PM: Registering ACPI NVS region at bb651000 (274432 bytes)
[    0.503122] print_constraints: dummy:
[    0.503156] RTC time: 15:06:16, date: 06/25/12
[    0.503190] NET: Registered protocol family 16
[    0.503293] Trying to unpack rootfs image as initramfs...
[    0.503302] ACPI: bus type pci registered
[    0.503365] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.503368] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.544855] PCI: Using configuration type 1 for base access
[    0.545844] bio: create slab <bio-0> at 0
[    0.545937] ACPI: Added _OSI(Module Device)
[    0.545939] ACPI: Added _OSI(Processor Device)
[    0.545941] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.545943] ACPI: Added _OSI(Processor Aggregator Device)
[    0.547370] ACPI: EC: Look up EC in DSDT
[    0.548769] ACPI: Executed 1 blocks of module-level executable AML code
[    0.553169] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.586669] ACPI: SSDT 00000000bb621c18 003A4 (v01    AMI      IST 00000001 MSFT 03000001)
[    0.587043] ACPI: Dynamic OEM Table Load:
[    0.587045] ACPI: SSDT           (null) 003A4 (v01    AMI      IST 00000001 MSFT 03000001)
[    0.587488] ACPI: Interpreter enabled
[    0.587491] ACPI: (supports S0 S3 S4 S5)
[    0.587513] ACPI: Using IOAPIC for interrupt routing
[    0.606023] ACPI: No dock devices found.
[    0.606026] HEST: Table not found.
[    0.606030] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.606156] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.606257] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.606259] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.606262] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.606264] pci_root PNP0A08:00: host bridge window [mem 0xbc000000-0xffffffff]
[    0.606277] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
[    0.606297] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[    0.606319] pci 0000:00:01.0: [8086:0045] type 1 class 0x000604
[    0.606354] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.606357] pci 0000:00:01.0: PME# disabled
[    0.606406] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
[    0.606435] pci 0000:00:16.0: reg 10: [mem 0xfbf09000-0xfbf0900f 64bit]
[    0.606530] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.606535] pci 0000:00:16.0: PME# disabled
[    0.606577] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[    0.606603] pci 0000:00:1a.0: reg 10: [mem 0xfbf08000-0xfbf083ff]
[    0.606712] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.606717] pci 0000:00:1a.0: PME# disabled
[    0.606748] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[    0.606770] pci 0000:00:1b.0: reg 10: [mem 0xfbf00000-0xfbf03fff 64bit]
[    0.606867] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.606872] pci 0000:00:1b.0: PME# disabled
[    0.606900] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[    0.607002] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.607007] pci 0000:00:1c.0: PME# disabled
[    0.607036] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
[    0.607137] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.607142] pci 0000:00:1c.1: PME# disabled
[    0.607171] pci 0000:00:1c.2: [8086:3b46] type 1 class 0x000604
[    0.607271] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.607276] pci 0000:00:1c.2: PME# disabled
[    0.607306] pci 0000:00:1c.4: [8086:3b4a] type 1 class 0x000604
[    0.607407] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.607412] pci 0000:00:1c.4: PME# disabled
[    0.607449] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[    0.607474] pci 0000:00:1d.0: reg 10: [mem 0xfbf07000-0xfbf073ff]
[    0.607584] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.607589] pci 0000:00:1d.0: PME# disabled
[    0.607614] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[    0.607702] pci 0000:00:1f.0: [8086:3b0b] type 0 class 0x000601
[    0.607833] pci 0000:00:1f.2: [8086:3b2f] type 0 class 0x000106
[    0.607861] pci 0000:00:1f.2: reg 10: [io  0xf070-0xf077]
[    0.607873] pci 0000:00:1f.2: reg 14: [io  0xf060-0xf063]
[    0.607884] pci 0000:00:1f.2: reg 18: [io  0xf050-0xf057]
[    0.607895] pci 0000:00:1f.2: reg 1c: [io  0xf040-0xf043]
[    0.607907] pci 0000:00:1f.2: reg 20: [io  0xf020-0xf03f]
[    0.607918] pci 0000:00:1f.2: reg 24: [mem 0xfbf06000-0xfbf067ff]
[    0.607986] pci 0000:00:1f.2: PME# supported from D3hot
[    0.607990] pci 0000:00:1f.2: PME# disabled
[    0.608013] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[    0.608034] pci 0000:00:1f.3: reg 10: [mem 0xfbf05000-0xfbf050ff 64bit]
[    0.608064] pci 0000:00:1f.3: reg 20: [io  0xf000-0xf01f]
[    0.608131] pci 0000:01:00.0: [1002:68e0] type 0 class 0x000300
[    0.608144] pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.608154] pci 0000:01:00.0: reg 18: [mem 0xfbe20000-0xfbe3ffff 64bit]
[    0.608161] pci 0000:01:00.0: reg 20: [io  0xe000-0xe0ff]
[    0.608173] pci 0000:01:00.0: reg 30: [mem 0xfbe00000-0xfbe1ffff pref]
[    0.608200] pci 0000:01:00.0: supports D1 D2
[    0.608218] pci 0000:01:00.1: [1002:aa68] type 0 class 0x000403
[    0.608230] pci 0000:01:00.1: reg 10: [mem 0xfbe40000-0xfbe43fff 64bit]
[    0.608282] pci 0000:01:00.1: supports D1 D2
[    0.608310] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.608313] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.608316] pci 0000:00:01.0:   bridge window [mem 0xfbe00000-0xfbefffff]
[    0.608319] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.608375] pci 0000:00:1c.0: PCI bridge to [bus 11-11]
[    0.608474] pci 0000:12:00.0: [14e4:4727] type 0 class 0x000280
[    0.608505] pci 0000:12:00.0: reg 10: [mem 0xfbd00000-0xfbd03fff 64bit]
[    0.608670] pci 0000:12:00.0: supports D1 D2
[    0.608672] pci 0000:12:00.0: PME# supported from D0 D3hot D3cold
[    0.608678] pci 0000:12:00.0: PME# disabled
[    0.613924] pci 0000:00:1c.1: PCI bridge to [bus 12-12]
[    0.613931] pci 0000:00:1c.1:   bridge window [mem 0xfbd00000-0xfbdfffff]
[    0.614042] pci 0000:13:00.0: [10ec:8136] type 0 class 0x000200
[    0.614106] pci 0000:13:00.0: reg 10: [io  0xd000-0xd0ff]
[    0.614214] pci 0000:13:00.0: reg 18: [mem 0xd0c10000-0xd0c10fff 64bit pref]
[    0.614280] pci 0000:13:00.0: reg 20: [mem 0xd0c00000-0xd0c0ffff 64bit pref]
[    0.614327] pci 0000:13:00.0: reg 30: [mem 0xfb300000-0xfb31ffff pref]
[    0.614516] pci 0000:13:00.0: supports D1 D2
[    0.614517] pci 0000:13:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.614532] pci 0000:13:00.0: PME# disabled
[    0.614664] pci 0000:00:1c.2: PCI bridge to [bus 13-13]
[    0.614669] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    0.614673] pci 0000:00:1c.2:   bridge window [mem 0xfb300000-0xfbcfffff]
[    0.614680] pci 0000:00:1c.2:   bridge window [mem 0xd0c00000-0xd15fffff 64bit pref]
[    0.614739] pci 0000:00:1c.4: PCI bridge to [bus 15-15]
[    0.614744] pci 0000:00:1c.4:   bridge window [io  0xc000-0xcfff]
[    0.614749] pci 0000:00:1c.4:   bridge window [mem 0xfa900000-0xfb2fffff]
[    0.614757] pci 0000:00:1c.4:   bridge window [mem 0xd0100000-0xd0afffff 64bit pref]
[    0.614832] pci 0000:00:1e.0: PCI bridge to [bus 20-20] (subtractive decode)
[    0.614845] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.614848] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.614850] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.614852] pci 0000:00:1e.0:   bridge window [mem 0xbc000000-0xffffffff] (subtractive decode)
[    0.614888] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.615054] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
[    0.615121] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[    0.615151] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[    0.615180] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[    0.615209] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[    0.615329]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.615517]  pci0000:00: ACPI _OSC control (0x19) granted
[    0.618635] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.618681] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.618725] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.618768] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 10 11 12 14 15)
[    0.618814] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[    0.618858] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[    0.618902] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.618946] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.619068] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.619071] vgaarb: loaded
[    0.619073] vgaarb: bridge control possible 0000:01:00.0
[    0.619170] i2c-core: driver [aat2870] using legacy suspend method
[    0.619171] i2c-core: driver [aat2870] using legacy resume method
[    0.619241] SCSI subsystem initialized
[    0.619306] libata version 3.00 loaded.
[    0.619350] usbcore: registered new interface driver usbfs
[    0.619361] usbcore: registered new interface driver hub
[    0.619387] usbcore: registered new device driver usb
[    0.619472] PCI: Using ACPI for IRQ routing
[    0.629245] PCI: Discovered peer bus ff
[    0.629295] pci 0000:ff:00.0: [8086:2c62] type 0 class 0x000600
[    0.629320] pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600
[    0.629341] pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600
[    0.629359] pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600
[    0.629377] pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600
[    0.629395] pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600
[    0.629561] PCI: pci_cache_line_size set to 64 bytes
[    0.629668] reserve RAM buffer: 000000000009d400 - 000000000009ffff
[    0.629670] reserve RAM buffer: 00000000bb587000 - 00000000bbffffff
[    0.629673] reserve RAM buffer: 00000000bb800000 - 00000000bbffffff
[    0.629773] NetLabel: Initializing
[    0.629775] NetLabel:  domain hash size = 128
[    0.629776] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.629789] NetLabel:  unlabeled traffic allowed by default
[    0.629861] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.629873] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.631889] Switching to clocksource hpet
[    0.638436] AppArmor: AppArmor Filesystem Enabled
[    0.638470] pnp: PnP ACPI init
[    0.638487] ACPI: bus type pnp registered
[    0.638581] pnp 00:00: [bus 00-ff]
[    0.638583] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.638585] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.638587] pnp 00:00: [io  0x0d00-0xffff window]
[    0.638589] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.638591] pnp 00:00: [mem 0x00000000 window]
[    0.638593] pnp 00:00: [mem 0xbc000000-0xffffffff window]
[    0.638678] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.638723] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[    0.638725] pnp 00:01: [mem 0xe0000000-0xefffffff]
[    0.638726] pnp 00:01: [mem 0xfed90000-0xfed93fff]
[    0.638728] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[    0.638730] pnp 00:01: [mem 0xfee00000-0xfee0ffff]
[    0.638786] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.638789] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[    0.638791] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.638793] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.638796] system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
[    0.638799] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.638823] pnp 00:02: [dma 4]
[    0.638825] pnp 00:02: [io  0x0000-0x000f]
[    0.638827] pnp 00:02: [io  0x0081-0x0083]
[    0.638828] pnp 00:02: [io  0x0087]
[    0.638830] pnp 00:02: [io  0x0089-0x008b]
[    0.638831] pnp 00:02: [io  0x008f]
[    0.638833] pnp 00:02: [io  0x00c0-0x00df]
[    0.638854] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.638863] pnp 00:03: [io  0x0070-0x0071]
[    0.638876] pnp 00:03: [irq 8]
[    0.638902] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.638910] pnp 00:04: [io  0x0061]
[    0.638932] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.638940] pnp 00:05: [io  0x00f0-0x00ff]
[    0.638945] pnp 00:05: [irq 13]
[    0.638966] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.638982] pnp 00:06: [io  0x0010-0x001f]
[    0.638984] pnp 00:06: [io  0x0022-0x003f]
[    0.638986] pnp 00:06: [io  0x0044-0x005f]
[    0.638987] pnp 00:06: [io  0x0068-0x006f]
[    0.638989] pnp 00:06: [io  0x0072-0x007f]
[    0.638990] pnp 00:06: [io  0x0080]
[    0.638992] pnp 00:06: [io  0x0084-0x0086]
[    0.638993] pnp 00:06: [io  0x0088]
[    0.638995] pnp 00:06: [io  0x008c-0x008e]
[    0.638997] pnp 00:06: [io  0x0090-0x009f]
[    0.638998] pnp 00:06: [io  0x00a2-0x00bf]
[    0.639000] pnp 00:06: [io  0x00e0-0x00ef]
[    0.639001] pnp 00:06: [io  0x04d0-0x04d1]
[    0.639003] pnp 00:06: [mem 0xfe800000-0xfe8001ff]
[    0.639046] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    0.639049] system 00:06: [mem 0xfe800000-0xfe8001ff] has been reserved
[    0.639052] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.639070] pnp 00:07: [irq 12]
[    0.639096] pnp 00:07: Plug and Play ACPI device, IDs DLL0447 SYN0600 SYN0002 PNP0f13 (active)
[    0.639109] pnp 00:08: [io  0x0060]
[    0.639111] pnp 00:08: [io  0x0064]
[    0.639112] pnp 00:08: [io  0x0062]
[    0.639114] pnp 00:08: [io  0x0066]
[    0.639119] pnp 00:08: [irq 1]
[    0.639141] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.639267] pnp 00:09: [io  0x0400-0x047f]
[    0.639269] pnp 00:09: [io  0x1180-0x119f]
[    0.639270] pnp 00:09: [io  0x0500-0x057f]
[    0.639272] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
[    0.639274] pnp 00:09: [mem 0xfec00000-0xfecfffff]
[    0.639276] pnp 00:09: [mem 0xfed08000-0xfed08fff]
[    0.639277] pnp 00:09: [mem 0xff000000-0xffffffff]
[    0.639318] system 00:09: [io  0x0400-0x047f] has been reserved
[    0.639321] system 00:09: [io  0x1180-0x119f] has been reserved
[    0.639323] system 00:09: [io  0x0500-0x057f] has been reserved
[    0.639326] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.639329] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved
[    0.639331] system 00:09: [mem 0xfed08000-0xfed08fff] has been reserved
[    0.639333] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
[    0.639336] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.639418] pnp 00:0a: [mem 0xfed00000-0xfed003ff]
[    0.639452] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.639649] pnp: PnP ACPI: found 11 devices
[    0.639651] ACPI: ACPI bus type pnp unregistered
[    0.647217] PCI: max bus depth: 1 pci_try_num: 2
[    0.647278] pci 0000:00:1c.1: BAR 15: assigned [mem 0xbc000000-0xbc1fffff 64bit pref]
[    0.647282] pci 0000:00:1c.1: BAR 13: assigned [io  0x2000-0x2fff]
[    0.647285] pci 0000:00:1c.0: BAR 14: assigned [mem 0xbc200000-0xbc3fffff]
[    0.647288] pci 0000:00:1c.0: BAR 15: assigned [mem 0xbc400000-0xbc5fffff 64bit pref]
[    0.647291] pci 0000:00:1c.0: BAR 13: assigned [io  0x3000-0x3fff]
[    0.647294] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.647296] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.647300] pci 0000:00:01.0:   bridge window [mem 0xfbe00000-0xfbefffff]
[    0.647303] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.647307] pci 0000:00:1c.0: PCI bridge to [bus 11-11]
[    0.647310] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.647316] pci 0000:00:1c.0:   bridge window [mem 0xbc200000-0xbc3fffff]
[    0.647322] pci 0000:00:1c.0:   bridge window [mem 0xbc400000-0xbc5fffff 64bit pref]
[    0.647330] pci 0000:00:1c.1: PCI bridge to [bus 12-12]
[    0.647333] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.647339] pci 0000:00:1c.1:   bridge window [mem 0xfbd00000-0xfbdfffff]
[    0.647344] pci 0000:00:1c.1:   bridge window [mem 0xbc000000-0xbc1fffff 64bit pref]
[    0.647353] pci 0000:00:1c.2: PCI bridge to [bus 13-13]
[    0.647356] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    0.647362] pci 0000:00:1c.2:   bridge window [mem 0xfb300000-0xfbcfffff]
[    0.647367] pci 0000:00:1c.2:   bridge window [mem 0xd0c00000-0xd15fffff 64bit pref]
[    0.647375] pci 0000:00:1c.4: PCI bridge to [bus 15-15]
[    0.647378] pci 0000:00:1c.4:   bridge window [io  0xc000-0xcfff]
[    0.647385] pci 0000:00:1c.4:   bridge window [mem 0xfa900000-0xfb2fffff]
[    0.647390] pci 0000:00:1c.4:   bridge window [mem 0xd0100000-0xd0afffff 64bit pref]
[    0.647398] pci 0000:00:1e.0: PCI bridge to [bus 20-20]
[    0.647430] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.647434] pci 0000:00:01.0: setting latency timer to 64
[    0.647448] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.647453] pci 0000:00:1c.0: setting latency timer to 64
[    0.647462] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.647466] pci 0000:00:1c.1: setting latency timer to 64
[    0.647477] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.647482] pci 0000:00:1c.2: setting latency timer to 64
[    0.647490] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.647495] pci 0000:00:1c.4: setting latency timer to 64
[    0.647503] pci 0000:00:1e.0: setting latency timer to 64
[    0.647508] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.647510] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.647512] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.647514] pci_bus 0000:00: resource 7 [mem 0xbc000000-0xffffffff]
[    0.647517] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.647519] pci_bus 0000:01: resource 1 [mem 0xfbe00000-0xfbefffff]
[    0.647521] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.647524] pci_bus 0000:11: resource 0 [io  0x3000-0x3fff]
[    0.647526] pci_bus 0000:11: resource 1 [mem 0xbc200000-0xbc3fffff]
[    0.647528] pci_bus 0000:11: resource 2 [mem 0xbc400000-0xbc5fffff 64bit pref]
[    0.647530] pci_bus 0000:12: resource 0 [io  0x2000-0x2fff]
[    0.647533] pci_bus 0000:12: resource 1 [mem 0xfbd00000-0xfbdfffff]
[    0.647535] pci_bus 0000:12: resource 2 [mem 0xbc000000-0xbc1fffff 64bit pref]
[    0.647537] pci_bus 0000:13: resource 0 [io  0xd000-0xdfff]
[    0.647539] pci_bus 0000:13: resource 1 [mem 0xfb300000-0xfbcfffff]
[    0.647542] pci_bus 0000:13: resource 2 [mem 0xd0c00000-0xd15fffff 64bit pref]
[    0.647544] pci_bus 0000:15: resource 0 [io  0xc000-0xcfff]
[    0.647546] pci_bus 0000:15: resource 1 [mem 0xfa900000-0xfb2fffff]
[    0.647548] pci_bus 0000:15: resource 2 [mem 0xd0100000-0xd0afffff 64bit pref]
[    0.647551] pci_bus 0000:20: resource 4 [io  0x0000-0x0cf7]
[    0.647553] pci_bus 0000:20: resource 5 [io  0x0d00-0xffff]
[    0.647555] pci_bus 0000:20: resource 6 [mem 0x000a0000-0x000bffff]
[    0.647558] pci_bus 0000:20: resource 7 [mem 0xbc000000-0xffffffff]
[    0.647560] pci_bus 0000:ff: resource 0 [io  0x0000-0xffff]
[    0.647562] pci_bus 0000:ff: resource 1 [mem 0x00000000-0xfffffffff]
[    0.647601] NET: Registered protocol family 2
[    0.647751] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.648747] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.651981] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.652392] TCP: Hash tables configured (established 524288 bind 65536)
[    0.652394] TCP reno registered
[    0.652406] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.652443] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.652560] NET: Registered protocol family 1
[    0.652596] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.779688] pci 0000:00:1a.0: PCI INT A disabled
[    0.779734] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.907432] pci 0000:00:1d.0: PCI INT A disabled
[    0.907455] pci 0000:01:00.0: Boot video device
[    0.907485] PCI: CLS 64 bytes, default 64
[    0.908041] audit: initializing netlink socket (disabled)
[    0.908053] type=2000 audit(1340636775.740:1): initialized
[    0.937850] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.953537] VFS: Disk quotas dquot_6.5.2
[    0.953591] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.954095] fuse init (API version 7.17)
[    0.954189] msgmni has been set to 5842
[    0.954639] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.954675] io scheduler noop registered
[    0.954677] io scheduler deadline registered
[    0.954709] io scheduler cfq registered (default)
[    0.954819] pcieport 0000:00:01.0: setting latency timer to 64
[    0.954850] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.954901] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.954952] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.955031] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.955082] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[    0.955162] pcieport 0000:00:1c.2: setting latency timer to 64
[    0.955213] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
[    0.955313] pcieport 0000:00:1c.4: setting latency timer to 64
[    0.955366] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
[    0.955460] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.955579] pciehp: Using ACPI for slot detection.
[    0.955643] pciehp 0000:00:1c.4:pcie04: HPC vendor_id 8086 device_id 3b4a ss_vid 1028 ss_did 447
[    0.955681] pciehp 0000:00:1c.4:pcie04: service driver pciehp loaded
[    0.955687] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.955735] intel_idle: MWAIT substates: 0x1120
[    0.955736] intel_idle: v0.4 model 0x25
[    0.955738] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.955821] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.955865] ACPI: AC Adapter [AC] (on-line)
[    0.955963] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.955969] ACPI: Power Button [PWRB]
[    0.956009] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    0.957968] ACPI: Lid Switch [LID0]
[    0.958007] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    0.958011] ACPI: Sleep Button [SBTN]
[    0.958047] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.958050] ACPI: Power Button [PWRF]
[    0.969926] thermal LNXTHERM:00: registered as thermal_zone0
[    0.969929] ACPI: Thermal Zone [THM] (44 C)
[    0.969952] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.969961] ACPI: Battery Slot [BAT0] (battery absent)
[    0.969992] ERST: Table is not found!
[    0.969994] GHES: HEST is not enabled!
[    0.970049] ACPI: Battery Slot [BAT0] (battery absent)
[    0.970093] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.044225] Freeing initrd memory: 13840k freed
[    1.207206] Linux agpgart interface v0.103
[    1.208837] brd: module loaded
[    1.209646] loop: module loaded
[    1.209770] ahci 0000:00:1f.2: version 3.0
[    1.209793] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.209837] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[    1.209924] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x13 impl SATA mode
[    1.209928] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems sxs apst
[    1.209934] ahci 0000:00:1f.2: setting latency timer to 64
[    1.223290] scsi0 : ahci
[    1.223380] scsi1 : ahci
[    1.223455] scsi2 : ahci
[    1.223535] scsi3 : ahci
[    1.223612] scsi4 : ahci
[    1.223686] scsi5 : ahci
[    1.223811] ata1: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06100 irq 45
[    1.223815] ata2: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06180 irq 45
[    1.223817] ata3: DUMMY
[    1.223818] ata4: DUMMY
[    1.223821] ata5: SATA max UDMA/133 abar m2048@0xfbf06000 port 0xfbf06300 irq 45
[    1.223822] ata6: DUMMY
[    1.224209] Fixed MDIO Bus: probed
[    1.224227] tun: Universal TUN/TAP device driver, 1.6
[    1.224228] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.224296] PPP generic driver version 2.4.2
[    1.224407] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.224424] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.224439] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.224443] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    1.224512] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.224545] ehci_hcd 0000:00:1a.0: debug port 2
[    1.228505] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    1.228522] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfbf08000
[    1.242747] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.242916] hub 1-0:1.0: USB hub found
[    1.242921] hub 1-0:1.0: 2 ports detected
[    1.242984] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.242997] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.243001] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    1.243053] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.243080] ehci_hcd 0000:00:1d.0: debug port 2
[    1.247097] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    1.247111] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfbf07000
[    1.262706] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.262861] hub 2-0:1.0: USB hub found
[    1.262865] hub 2-0:1.0: 2 ports detected
[    1.262921] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.262933] uhci_hcd: USB Universal Host Controller Interface driver
[    1.262975] usbcore: registered new interface driver libusual
[    1.263008] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2] at 0x60,0x64 irq 1,12
[    1.284425] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.284432] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.284566] mousedev: PS/2 mouse device common for all mice
[    1.285423] rtc_cmos 00:03: RTC can wake from S4
[    1.285548] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.285580] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    1.285652] device-mapper: uevent: version 1.0.3
[    1.285725] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    1.285820] cpuidle: using governor ladder
[    1.285961] cpuidle: using governor menu
[    1.285963] EFI Variables Facility v0.08 2004-May-17
[    1.286187] TCP cubic registered
[    1.286189] IPv6: Loaded, but administratively disabled, reboot required to enable
[    1.286192] NET: Registered protocol family 17
[    1.286205] Registering the dns_resolver key type
[    1.286366] PM: Hibernation image not present or could not be loaded.
[    1.286378] registered taskstats version 1
[    1.302106]   Magic number: 0:534:134
[    1.302229] acpi device:09: hash matches
[    1.302286] rtc_cmos 00:03: setting system clock to 2012-06-25 15:06:16 UTC (1340636776)
[    1.303533] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.303535] EDD information not available.
[    1.312844] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.542247] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.542286] ata5: SATA link down (SStatus 0 SControl 300)
[    1.542401] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.554198] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    1.565682] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-L633C, DW50, max UDMA/100
[    1.565687] ata2.00: applying bridge limits
[    1.589349] ata2.00: configured for UDMA/100
[    1.599691] ata1.00: ATA-8: TOSHIBA MK3265GSX, GJ002D, max UDMA/100
[    1.599696] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.600703] ata1.00: configured for UDMA/100
[    1.601037] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK3265GS GJ00 PQ: 0 ANSI: 5
[    1.601271] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.601325] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.601492] sd 0:0:0:0: [sda] Write Protect is off
[    1.601497] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.601645] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.604525] scsi 1:0:0:0: CD-ROM            TSSTcorp DVD+-RW TS-L633C DW50 PQ: 0 ANSI: 5
[    1.612124] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.612129] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.612419] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.612563] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.680144]  sda: sda1 sda2 sda4 < sda5 >
[    1.681356] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.683103] Freeing unused kernel memory: 920k freed
[    1.683252] Write protecting the kernel read-only data: 12288k
[    1.686585] hub 1-1:1.0: USB hub found
[    1.686665] hub 1-1:1.0: 6 ports detected
[    1.688776] Freeing unused kernel memory: 1604k freed
[    1.692886] Freeing unused kernel memory: 1196k freed
[    1.714033] udevd[106]: starting version 175
[    1.742346] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.742398] r8169 0000:13:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.742438] r8169 0000:13:00.0: setting latency timer to 64
[    1.742504] r8169 0000:13:00.0: irq 46 for MSI/MSI-X
[    1.742791] r8169 0000:13:00.0: eth0: RTL8102e at 0xffffc90000648000, f0:4d:a2:7f:f7:7b, XID 04e00000 IRQ 46
[    1.801693] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[    1.905495] Refined TSC clocksource calibration: 2260.999 MHz.
[    1.905501] Switching to clocksource tsc
[    1.934593] hub 2-1:1.0: USB hub found
[    1.934640] hub 2-1:1.0: 8 ports detected
[    2.005498] usb 1-1.1: new full-speed USB device number 3 using ehci_hcd
[    2.112415] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input5
[    2.112607] generic-usb 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0] on usb-0000:00:1a.0-1.1/input0
[    2.118259] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input6
[    2.118655] generic-usb 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0] on usb-0000:00:1a.0-1.1/input1
[    2.134489] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.2/input/input7
[    2.134875] generic-usb 0003:045E:0745.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0] on usb-0000:00:1a.0-1.1/input2
[    2.134910] usbcore: registered new interface driver usbhid
[    2.134916] usbhid: USB HID core driver
[    2.177135] usb 1-1.6: new full-speed USB device number 4 using ehci_hcd
[    2.320886] usb 1-1.6: new high-speed USB device number 5 using ehci_hcd
[    2.483421] EXT4-fs (sda2): INFO: recovery required on readonly filesystem
[    2.483427] EXT4-fs (sda2): write access will be enabled during recovery
[    2.528571] usb 2-1.2: new low-speed USB device number 3 using ehci_hcd
[    2.629564] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input8
[    2.629737] generic-usb 0003:04F3:0103.0004: input,hidraw3: USB HID v1.11 Keyboard [HID 04f3:0103] on usb-0000:00:1d.0-1.2/input0
[    2.634198] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input9
[    2.634380] generic-usb 0003:04F3:0103.0005: input,hidraw4: USB HID v1.11 Device [HID 04f3:0103] on usb-0000:00:1d.0-1.2/input1
[   10.971283] ata1.00: exception Emask 0x0 SAct 0x7effffff SErr 0x0 action 0x0
[   10.971289] ata1.00: irq_stat 0x40000008
[   10.971295] ata1.00: failed command: READ FPDMA QUEUED
[   10.971303] ata1.00: cmd 60/38:c8:a8:0c:4a/00:00:07:00:00/40 tag 25 ncq 28672 in
[   10.971304]          res 41/40:38:d2:0c:4a/00:00:07:00:00/67 Emask 0x409 (media error) <F>
[   10.971308] ata1.00: status: { DRDY ERR }
[   10.971311] ata1.00: error: { UNC }
[   11.005258] ata1.00: configured for UDMA/100
[   11.005285] ata1: EH complete
[   66.643448] EXT4-fs (sda2): orphan cleanup on readonly fs
[   66.643457] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 7602243
[   66.643509] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 7602272
[   66.643517] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 6035328
[   66.643544] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 7602290
[   66.643571] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 5771949
[   66.643583] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 5771948
[   66.643610] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 6041272
[   72.411838] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 6041255
[   73.514981] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 6039823
[   73.534844] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 6039135
[   73.537445] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 6039030
[   73.537469] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 6038964
[   73.537497] EXT4-fs (sda2): 12 orphan inodes deleted
[   73.537498] EXT4-fs (sda2): recovery complete
[   73.592677] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[   94.958232] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[   94.958237] ata1.00: irq_stat 0x40000008
[   94.958242] ata1.00: failed command: READ FPDMA QUEUED
[   94.958250] ata1.00: cmd 60/f8:00:08:3e:83/01:00:0b:00:00/40 tag 0 ncq 258048 in
[   94.958252]          res 41/40:f8:51:3f:83/00:01:0b:00:00/6b Emask 0x409 (media error) <F>
[   94.958256] ata1.00: status: { DRDY ERR }
[   94.958258] ata1.00: error: { UNC }
[   94.960178] ata1.00: configured for UDMA/100
[   94.960191] ata1: EH complete
[   99.227940] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[   99.227944] ata1.00: irq_stat 0x40000008
[   99.227948] ata1.00: failed command: READ FPDMA QUEUED
[   99.227956] ata1.00: cmd 60/f8:00:08:3e:83/01:00:0b:00:00/40 tag 0 ncq 258048 in
[   99.227958]          res 41/40:f8:51:3f:83/00:01:0b:00:00/6b Emask 0x409 (media error) <F>
[   99.227962] ata1.00: status: { DRDY ERR }
[   99.227964] ata1.00: error: { UNC }
[   99.229849] ata1.00: configured for UDMA/100
[   99.229862] ata1: EH complete
[  103.919136] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[  103.919141] ata1.00: irq_stat 0x40000008
[  103.919145] ata1.00: failed command: READ FPDMA QUEUED
[  103.919153] ata1.00: cmd 60/f8:00:08:3e:83/01:00:0b:00:00/40 tag 0 ncq 258048 in
[  103.919155]          res 41/40:f8:51:3f:83/00:01:0b:00:00/6b Emask 0x409 (media error) <F>
[  103.919158] ata1.00: status: { DRDY ERR }
[  103.919161] ata1.00: error: { UNC }
[  103.921080] ata1.00: configured for UDMA/100
[  103.921093] ata1: EH complete
[  108.255450] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[  108.255455] ata1.00: irq_stat 0x40000008
[  108.255459] ata1.00: failed command: READ FPDMA QUEUED
[  108.255466] ata1.00: cmd 60/f8:00:08:3e:83/01:00:0b:00:00/40 tag 0 ncq 258048 in
[  108.255468]          res 41/40:f8:51:3f:83/00:01:0b:00:00/6b Emask 0x409 (media error) <F>
[  108.255472] ata1.00: status: { DRDY ERR }
[  108.255475] ata1.00: error: { UNC }
[  108.257389] ata1.00: configured for UDMA/100
[  108.257402] ata1: EH complete
[  112.547401] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[  112.547406] ata1.00: irq_stat 0x40000008
[  112.547410] ata1.00: failed command: READ FPDMA QUEUED
[  112.547418] ata1.00: cmd 60/f8:00:08:3e:83/01:00:0b:00:00/40 tag 0 ncq 258048 in
[  112.547419]          res 41/40:f8:51:3f:83/00:01:0b:00:00/6b Emask 0x409 (media error) <F>
[  112.547423] ata1.00: status: { DRDY ERR }
[  112.547426] ata1.00: error: { UNC }
[  112.549398] ata1.00: configured for UDMA/100
[  112.549416] ata1: EH complete
[  117.271861] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[  117.271865] ata1.00: irq_stat 0x40000008
[  117.271869] ata1.00: failed command: READ FPDMA QUEUED
[  117.271877] ata1.00: cmd 60/f8:00:08:3e:83/01:00:0b:00:00/40 tag 0 ncq 258048 in
[  117.271879]          res 41/40:f8:51:3f:83/00:01:0b:00:00/6b Emask 0x409 (media error) <F>
[  117.271883] ata1.00: status: { DRDY ERR }
[  117.271885] ata1.00: error: { UNC }
[  117.273816] ata1.00: configured for UDMA/100
[  117.273848] sd 0:0:0:0: [sda] Unhandled sense code
[  117.273851] sd 0:0:0:0: [sda]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  117.273856] sd 0:0:0:0: [sda]  Sense Key : Medium Error [current] [descriptor]
[  117.273862] Descriptor sense data with sense descriptors (in hex):
[  117.273865]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[  117.273876]         0b 83 3f 51
[  117.273881] sd 0:0:0:0: [sda]  Add. Sense: Unrecovered read error - auto reallocate failed
[  117.273887] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 0b 83 3e 08 00 01 f8 00
[  117.273897] end_request: I/O error, dev sda, sector 193150801
[  117.273902] Buffer I/O error on device sda2, logical block 24117994
[  117.273905] Buffer I/O error on device sda2, logical block 24117995
[  117.273909] Buffer I/O error on device sda2, logical block 24117996
[  117.273912] Buffer I/O error on device sda2, logical block 24117997
[  117.273915] Buffer I/O error on device sda2, logical block 24117998
[  117.273919] Buffer I/O error on device sda2, logical block 24117999
[  117.273922] Buffer I/O error on device sda2, logical block 24118000
[  117.273925] Buffer I/O error on device sda2, logical block 24118001
[  117.273931] Buffer I/O error on device sda2, logical block 24118002
[  117.273933] Buffer I/O error on device sda2, logical block 24118003
[  117.273948] ata1: EH complete
[  121.519455] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[  121.519460] ata1.00: irq_stat 0x40000008
[  121.519464] ata1.00: failed command: READ FPDMA QUEUED
[  121.519472] ata1.00: cmd 60/08:00:50:3f:83/00:00:0b:00:00/40 tag 0 ncq 4096 in
[  121.519474]          res 41/40:08:51:3f:83/00:00:0b:00:00/6b Emask 0x409 (media error) <F>
[  121.519477] ata1.00: status: { DRDY ERR }
[  121.519480] ata1.00: error: { UNC }
[  121.521368] ata1.00: configured for UDMA/100
[  121.521380] ata1: EH complete
[  126.177388] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[  126.177393] ata1.00: irq_stat 0x40000008
[  126.177397] ata1.00: failed command: READ FPDMA QUEUED
[  126.177405] ata1.00: cmd 60/08:00:50:3f:83/00:00:0b:00:00/40 tag 0 ncq 4096 in
[  126.177407]          res 41/40:08:51:3f:83/00:00:0b:00:00/6b Emask 0x409 (media error) <F>
[  126.177410] ata1.00: status: { DRDY ERR }
[  126.177413] ata1.00: error: { UNC }
[  126.179330] ata1.00: configured for UDMA/100
[  126.179342] ata1: EH complete
[  130.879697] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[  130.879701] ata1.00: irq_stat 0x40000008
[  130.879705] ata1.00: failed command: READ FPDMA QUEUED
[  130.879713] ata1.00: cmd 60/08:00:50:3f:83/00:00:0b:00:00/40 tag 0 ncq 4096 in
[  130.879715]          res 41/40:08:51:3f:83/00:00:0b:00:00/6b Emask 0x409 (media error) <F>
[  130.879719] ata1.00: status: { DRDY ERR }
[  130.879721] ata1.00: error: { UNC }
[  130.881579] ata1.00: configured for UDMA/100
[  130.881591] ata1: EH complete
[  135.205049] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[  135.205054] ata1.00: irq_stat 0x40000008
[  135.205058] ata1.00: failed command: READ FPDMA QUEUED
[  135.205066] ata1.00: cmd 60/08:00:50:3f:83/00:00:0b:00:00/40 tag 0 ncq 4096 in
[  135.205067]          res 41/40:08:51:3f:83/00:00:0b:00:00/6b Emask 0x409 (media error) <F>
[  135.205071] ata1.00: status: { DRDY ERR }
[  135.205074] ata1.00: error: { UNC }
[  135.206975] ata1.00: configured for UDMA/100
[  135.206987] ata1: EH complete
[  139.663214] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[  139.663218] ata1.00: irq_stat 0x40000008
[  139.663222] ata1.00: failed command: READ FPDMA QUEUED
[  139.663230] ata1.00: cmd 60/08:00:50:3f:83/00:00:0b:00:00/40 tag 0 ncq 4096 in
[  139.663232]          res 41/40:08:51:3f:83/00:00:0b:00:00/6b Emask 0x409 (media error) <F>
[  139.663236] ata1.00: status: { DRDY ERR }
[  139.663238] ata1.00: error: { UNC }
[  139.665150] ata1.00: configured for UDMA/100
[  139.665162] ata1: EH complete
[  144.565119] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[  144.565123] ata1.00: irq_stat 0x40000008
[  144.565127] ata1.00: failed command: READ FPDMA QUEUED
[  144.565135] ata1.00: cmd 60/08:00:50:3f:83/00:00:0b:00:00/40 tag 0 ncq 4096 in
[  144.565137]          res 41/40:08:51:3f:83/00:00:0b:00:00/6b Emask 0x409 (media error) <F>
[  144.565141] ata1.00: status: { DRDY ERR }
[  144.565144] ata1.00: error: { UNC }
[  144.567029] ata1.00: configured for UDMA/100
[  144.567041] sd 0:0:0:0: [sda] Unhandled sense code
[  144.567044] sd 0:0:0:0: [sda]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  144.567048] sd 0:0:0:0: [sda]  Sense Key : Medium Error [current] [descriptor]
[  144.567053] Descriptor sense data with sense descriptors (in hex):
[  144.567056]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[  144.567066]         0b 83 3f 51
[  144.567071] sd 0:0:0:0: [sda]  Add. Sense: Unrecovered read error - auto reallocate failed
[  144.567077] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 0b 83 3f 50 00 00 08 00
[  144.567086] end_request: I/O error, dev sda, sector 193150801
[  144.567090] quiet_error: 12 callbacks suppressed
[  144.567093] Buffer I/O error on device sda2, logical block 24117994
[  144.567111] ata1: EH complete
[  186.409151] udevd[341]: starting version 175
[  187.050192] mei: module is from the staging directory, the quality is unknown, you have been warned.
[  187.050594] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[  187.050605] mei 0000:00:16.0: setting latency timer to 64
[  187.050681] mei 0000:00:16.0: irq 47 for MSI/MSI-X
[  187.054101] lib80211: common routines for IEEE802.11 drivers
[  187.054105] lib80211_crypt: registered algorithm 'NULL'
[  187.055877] lp: driver loaded but no devices found
[  187.069674] wl: module license 'MIXED/Proprietary' taints kernel.
[  187.069680] Disabling lock debugging due to kernel taint
[  187.073460] Linux video capture interface: v2.00
[  187.075188] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[  187.075774] wmi: Mapper loaded
[  187.085078] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_1.3M (0c45:6461)
[  187.098082] ACPI Warning: _BQC returned an invalid level (20110623/video-480)
[  187.108829] wl 0000:12:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[  187.108840] wl 0000:12:00.0: setting latency timer to 64
[  187.112079] acpi device:03: registered as cooling_device4
[  187.112176] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input10
[  187.112236] ACPI: Video Device [PEGP] (multi-head: yes  rom: no  post: no)
[  187.130692] input: Laptop_Integrated_Webcam_1.3M as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input11
[  187.130796] usbcore: registered new interface driver uvcvideo
[  187.130800] USB Video Class driver (1.1.1)
[  187.156234] lib80211_crypt: registered algorithm 'TKIP'
[  187.185451] [fglrx] Maximum main memory to use for locked dma buffers: 2794 MBytes.
[  187.192944] Adding 102396k swap on /dev/sda1.  Priority:-1 extents:1 across:102396k
[  187.192989] [fglrx]   vendor: 1002 device: 68e0 count: 1
[  187.193532] [fglrx] ioport: bar 4, base 0xe000, size: 0x100
[  187.193553] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[  187.193559] pci 0000:01:00.0: setting latency timer to 64
[  187.193847] [fglrx] Kernel PAT support is enabled
[  187.193872] [fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors
[  187.205582] type=1400 audit(1340636962.768:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=406 comm="apparmor_parser"
[  187.206190] type=1400 audit(1340636962.768:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=406 comm="apparmor_parser"
[  187.206565] type=1400 audit(1340636962.768:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=406 comm="apparmor_parser"
[  187.206846] type=1400 audit(1340636962.768:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=530 comm="apparmor_parser"
[  187.207395] type=1400 audit(1340636962.768:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=530 comm="apparmor_parser"
[  187.207713] type=1400 audit(1340636962.768:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=530 comm="apparmor_parser"
[  187.218007] input: Dell WMI hotkeys as /devices/virtual/input/input12
[  187.245209] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[  187.245283] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[  187.245323] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[  187.277608] eth1: Broadcom BCM4727 802.11 Hybrid Wireless Controller 5.100.82.38
[  187.294987] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[  187.295162] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[  187.296353] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[  187.296430] snd_hda_intel 0000:01:00.1: irq 49 for MSI/MSI-X
[  187.296462] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[  187.314046] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[  187.314154] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[  188.000822] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[  188.104953] init: failsafe main process (862) killed by TERM signal
[  188.138622] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[  188.138625] vesafb: scrolling: redraw
[  188.138628] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[  188.141376] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90011100000, using 3072k, total 3072k
[  188.141584] Console: switching to colour frame buffer device 128x48
[  188.141614] fb0: VESA VGA frame buffer device
[  188.183204] Bluetooth: Core ver 2.16
[  188.183230] NET: Registered protocol family 31
[  188.183233] Bluetooth: HCI device and connection manager initialized
[  188.183237] Bluetooth: HCI socket layer initialized
[  188.183239] Bluetooth: L2CAP socket layer initialized
[  188.183246] Bluetooth: SCO socket layer initialized
[  188.190850] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[  188.190853] Bluetooth: BNEP filters: protocol multicast
[  188.195848] ppdev: user-space parallel port driver
[  188.200712] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
[  188.209670] Bluetooth: RFCOMM TTY layer initialized
[  188.209678] Bluetooth: RFCOMM socket layer initialized
[  188.209680] Bluetooth: RFCOMM ver 1.11
[  188.221653] type=1400 audit(1340636963.784:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=960 comm="apparmor_parser"
[  188.222434] type=1400 audit(1340636963.784:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=960 comm="apparmor_parser"
[  188.277200] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input16
[  188.299710] type=1400 audit(1340636963.864:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=996 comm="apparmor_parser"
[  188.317855] r8169 0000:13:00.0: eth0: link down
[  188.540224] vboxdrv: Found 4 processor cores.
[  188.540557] vboxdrv: fAsync=0 offMin=0x247 offMax=0xfec9
[  188.540637] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[  188.540639] vboxdrv: Successfully loaded version 4.1.16 (interface 0x00190000).
[  188.737325] fglrx_pci 0000:01:00.0: irq 50 for MSI/MSI-X
[  188.737999] [fglrx] Firegl kernel thread PID: 1117
[  188.738076] [fglrx] Firegl kernel thread PID: 1118
[  188.738149] [fglrx] Firegl kernel thread PID: 1119
[  188.738256] [fglrx] IRQ 50 Enabled
[  188.751340] vboxpci: IOMMU not found (not registered)
[  188.877009] [fglrx] Gart USWC size:920 M.
[  188.877013] [fglrx] Gart cacheable size:363 M.
[  188.877019] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[  188.877022] [fglrx] Reserved FB block: Unshared offset:fa1f000, size:2e1000
[  188.877025] [fglrx] Reserved FB block: Unshared offset:1fff4000, size:c000
[ 2591.911242] PM: Syncing filesystems ... done.
[ 2591.913116] PM: Preparing system for mem sleep
[ 2591.913133] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 2591.926313] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 2591.942230] PM: Entering mem sleep
[ 2591.942315] Suspending console(s) (use no_console_suspend to debug)
[ 2591.942937] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 2592.031372] wl 0000:12:00.0: PCI INT A disabled
[ 2592.031399] [fglrx] IRQ 50 Disabled
[ 2592.031455] pciehp 0000:00:1c.4:pcie04: pciehp_suspend ENTRY
[ 2592.031542] [fglrx] Preparing suspend fglrx in kernel.
[ 2592.045967] ehci_hcd 0000:00:1d.0: PCI INT A disabled
[ 2592.045970] ehci_hcd 0000:00:1a.0: PCI INT A disabled
[ 2592.133844] snd_hda_intel 0000:01:00.1: PCI INT B disabled
[ 2592.133877] ACPI handle has no context!
[ 2592.134629] snd_hda_intel 0000:00:1b.0: PCI INT A disabled
[ 2592.134673] ACPI handle has no context!
[ 2592.149776] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 118.511 msecs
[ 2592.149780] PM: suspend of drv:snd_hda_intel dev:0000:01:00.1 complete after 118.720 msecs
[ 2592.212005] [fglrx] Suspending fglrx in kernel completed.
[ 2592.212007] [fglrx] Power down the ASIC .
[ 2592.212052] PM: suspend of drv:fglrx_pci dev:0000:01:00.0 complete after 181.071 msecs
[ 2592.212089] PM: suspend of drv:pcieport dev:0000:00:01.0 complete after 180.836 msecs
[ 2592.314468] sd 0:0:0:0: [sda] Stopping disk
[ 2592.931244] PM: suspend of drv:sd dev:0:0:0:0 complete after 990.278 msecs
[ 2592.931311] PM: suspend of drv:scsi dev:target0:0:0 complete after 990.142 msecs
[ 2592.931333] PM: suspend of drv:scsi dev:host0 complete after 901.964 msecs
[ 2592.944258] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 914.682 msecs
[ 2592.944279] PM: suspend of drv: dev:pci0000:00 complete after 914.451 msecs
[ 2592.944305] PM: suspend of devices complete after 1003.837 msecs
[ 2592.944309] PM: suspend devices took 1.004 seconds
[ 2592.944575] r8169 0000:13:00.0: PME# enabled
[ 2592.944589] pcieport 0000:00:1c.2: wake-up capability enabled by ACPI
[ 2592.960440] ehci_hcd 0000:00:1d.0: PME# enabled
[ 2592.964791] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
[ 2592.980233] ehci_hcd 0000:00:1a.0: PME# enabled
[ 2592.984928] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
[ 2593.016146] PM: late suspend of devices complete after 71.968 msecs
[ 2593.016554] ACPI: Preparing to enter system sleep state S3
[ 2593.028440] PM: Saving platform NVS memory
[ 2593.030577] Disabling non-boot CPUs ...
[ 2593.032766] CPU 1 is now offline
[ 2593.135864] CPU 2 is now offline
[ 2593.239630] CPU 3 is now offline
[ 2593.240014] Extended CMOS year: 2000
[ 2593.240248] ACPI: Low-level resume complete
[ 2593.240307] PM: Restoring platform NVS memory
[ 2593.240788] Extended CMOS year: 2000
[ 2593.240820] Enabling non-boot CPUs ...
[ 2593.240977] Booting Node 0 Processor 1 APIC 0x4
[ 2593.240979] smpboot cpu 1: start_ip = 98000
[ 2593.251989] Calibrating delay loop (skipped) already calibrated this CPU
[ 2593.272325] NMI watchdog enabled, takes one hw-pmu counter.
[ 2593.272718] CPU1 is up
[ 2593.272797] Booting Node 0 Processor 2 APIC 0x1
[ 2593.272799] smpboot cpu 2: start_ip = 98000
[ 2593.283810] Calibrating delay loop (skipped) already calibrated this CPU
[ 2593.304181] NMI watchdog enabled, takes one hw-pmu counter.
[ 2593.304587] CPU2 is up
[ 2593.304664] Booting Node 0 Processor 3 APIC 0x5
[ 2593.304665] smpboot cpu 3: start_ip = 98000
[ 2593.315675] Calibrating delay loop (skipped) already calibrated this CPU
[ 2593.336172] NMI watchdog enabled, takes one hw-pmu counter.
[ 2593.336628] CPU3 is up
[ 2593.339479] ACPI: Waking up from system sleep state S3
[ 2593.364687] pcieport 0000:00:01.0: restoring config space at offset 0xf (was 0x100, writing 0x18010b)
[ 2593.364696] pcieport 0000:00:01.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0xcff1c001)
[ 2593.364701] pcieport 0000:00:01.0: restoring config space at offset 0x8 (was 0xfff0, writing 0xfbe0fbe0)
[ 2593.364705] pcieport 0000:00:01.0: restoring config space at offset 0x7 (was 0xf0, writing 0xe0e0)
[ 2593.364711] pcieport 0000:00:01.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10010)
[ 2593.364717] pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[ 2593.364747] mei 0000:00:16.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 2593.364765] mei 0000:00:16.0: restoring config space at offset 0x4 (was 0xfed10004, writing 0xfbf09004)
[ 2593.364797] ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 2593.364816] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x4 (was 0x0, writing 0xfbf08000)
[ 2593.364824] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
[ 2593.367696] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
[ 2593.367703] ehci_hcd 0000:00:1a.0: PME# disabled
[ 2593.367722] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x105)
[ 2593.367742] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 2593.367749] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[ 2593.367783] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x10010a)
[ 2593.367795] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xbc51bc41)
[ 2593.367800] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xbc30bc20)
[ 2593.367805] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x0, writing 0x3030)
[ 2593.367814] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[ 2593.367821] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[ 2593.367873] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x10020b)
[ 2593.367884] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0xbc11bc01)
[ 2593.367889] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xfbd0fbd0)
[ 2593.367894] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0x2020)
[ 2593.367903] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[ 2593.367910] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[ 2593.367962] pcieport 0000:00:1c.2: restoring config space at offset 0xf (was 0x300, writing 0x100303)
[ 2593.367973] pcieport 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0xd151d0c1)
[ 2593.367978] pcieport 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xfbc0fb30)
[ 2593.367983] pcieport 0000:00:1c.2: restoring config space at offset 0x7 (was 0x0, writing 0xd0d0)
[ 2593.367992] pcieport 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[ 2593.367999] pcieport 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[ 2593.368050] pcieport 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x10010a)
[ 2593.368062] pcieport 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0xd0a1d011)
[ 2593.368067] pcieport 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xfb20fa90)
[ 2593.368079] pcieport 0000:00:1c.4: restoring config space at offset 0x7 (was 0x0, writing 0xc0c0)
[ 2593.368089] pcieport 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[ 2593.368095] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[ 2593.368144] ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x107)
[ 2593.368163] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x4 (was 0x0, writing 0xfbf07000)
[ 2593.368171] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
[ 2593.371471] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[ 2593.371477] ehci_hcd 0000:00:1d.0: PME# disabled
[ 2593.371488] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x0, writing 0x100000)
[ 2593.371500] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[ 2593.371505] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
[ 2593.371511] pci 0000:00:1e.0: restoring config space at offset 0x6 (was 0x0, writing 0x20202000)
[ 2593.371521] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100005, writing 0x100007)
[ 2593.371584] ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x204)
[ 2593.371606] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[ 2593.371677] fglrx_pci 0000:01:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b)
[ 2593.371682] fglrx_pci 0000:01:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfbe00000)
[ 2593.371689] fglrx_pci 0000:01:00.0: restoring config space at offset 0x8 (was 0x1, writing 0xe001)
[ 2593.371693] fglrx_pci 0000:01:00.0: restoring config space at offset 0x6 (was 0x4, writing 0xfbe20004)
[ 2593.371698] fglrx_pci 0000:01:00.0: restoring config space at offset 0x4 (was 0xc, writing 0xc000000c)
[ 2593.371702] fglrx_pci 0000:01:00.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800010)
[ 2593.371707] fglrx_pci 0000:01:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100403)
[ 2593.371741] snd_hda_intel 0000:01:00.1: restoring config space at offset 0xf (was 0x2ff, writing 0x20a)
[ 2593.371753] snd_hda_intel 0000:01:00.1: restoring config space at offset 0x4 (was 0x4, writing 0xfbe40004)
[ 2593.371757] snd_hda_intel 0000:01:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x800010)
[ 2593.371762] snd_hda_intel 0000:01:00.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100003)
[ 2593.371807] wl 0000:12:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[ 2593.371834] wl 0000:12:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xfbd00004)
[ 2593.371841] wl 0000:12:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 2593.371850] wl 0000:12:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)
[ 2593.371979] r8169 0000:13:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x103)
[ 2593.372007] r8169 0000:13:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfb300000)
[ 2593.372040] r8169 0000:13:00.0: restoring config space at offset 0x8 (was 0xc, writing 0xd0c0000c)
[ 2593.372061] r8169 0000:13:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xd0c1000c)
[ 2593.372088] r8169 0000:13:00.0: restoring config space at offset 0x4 (was 0x1, writing 0xd001)
[ 2593.372102] r8169 0000:13:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 2593.372123] r8169 0000:13:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[ 2593.372417] PM: early resume of devices complete after 7.823 msecs
[ 2593.372563] mei 0000:00:16.0: irq 47 for MSI/MSI-X
[ 2593.372597] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2593.372607] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2593.372651] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 2593.372657] pciehp 0000:00:1c.4:pcie04: pciehp_resume ENTRY
[ 2593.372661] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2593.372664] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 2593.372672] pci 0000:00:1e.0: setting latency timer to 64
[ 2593.372676] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2593.372699] ahci 0000:00:1f.2: setting latency timer to 64
[ 2593.372711] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2593.372727] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 2593.372785] wl 0000:12:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2593.372789] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[ 2593.372799] wl 0000:12:00.0: setting latency timer to 64
[ 2593.372824] fglrx_pci 0000:01:00.0: setting latency timer to 64
[ 2593.372870] snd_hda_intel 0000:01:00.1: irq 49 for MSI/MSI-X
[ 2593.372880] pcieport 0000:00:1c.2: wake-up capability disabled by ACPI
[ 2593.372896] r8169 0000:13:00.0: PME# disabled
[ 2593.375329] sd 0:0:0:0: [sda] Starting disk
[ 2593.377723] [fglrx] Power up the ASIC
[ 2593.377764] [fglrx] Preparing resume fglrx in kernel.
[ 2593.436206] [fglrx] Resuming fglrx in kernel completed.
[ 2593.436336] [fglrx] IRQ 50 Enabled
[ 2593.497154] PM: resume of drv:usbhid dev:2-1.2:1.1 complete after 121.605 msecs
[ 2593.497161] PM: resume of drv:usbhid dev:2-1.2:1.0 complete after 121.649 msecs
[ 2593.497169] PM: resume of drv: dev:ep_00 complete after 121.578 msecs
[ 2593.497186] PM: resume of drv: dev:ep_81 complete after 121.659 msecs
[ 2593.497192] PM: resume of drv: dev:ep_82 complete after 121.629 msecs
[ 2593.551840] PM: resume of drv:hub dev:1-1:1.0 complete after 176.842 msecs
[ 2593.551847] PM: resume of drv: dev:ep_00 complete after 176.793 msecs
[ 2593.551873] PM: resume of drv: dev:ep_81 complete after 176.843 msecs
[ 2593.600774] PM: resume of drv:usbhid dev:1-1.1:1.1 complete after 225.663 msecs
[ 2593.600779] PM: resume of drv:usbhid dev:1-1.1:1.0 complete after 225.703 msecs
[ 2593.600784] PM: resume of drv: dev:ep_00 complete after 225.599 msecs
[ 2593.600787] PM: resume of drv: dev:ep_82 complete after 225.660 msecs
[ 2593.600794] PM: resume of drv:usbhid dev:1-1.1:1.2 complete after 225.649 msecs
[ 2593.600797] PM: resume of drv: dev:ep_81 complete after 225.702 msecs
[ 2593.600807] PM: resume of drv: dev:ep_83 complete after 225.644 msecs
[ 2593.623956] usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
[ 2593.691519] ata5: SATA link down (SStatus 0 SControl 300)
[ 2593.707510] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2593.786183] ata2.00: configured for UDMA/100
[ 2593.787179] PM: resume of drv:uvcvideo dev:1-1.6:1.1 complete after 412.295 msecs
[ 2593.787188] PM: resume of drv:uvcvideo dev:1-1.6:1.0 complete after 412.340 msecs
[ 2593.787196] PM: resume of drv: dev:ep_00 complete after 412.287 msecs
[ 2593.787204] PM: resume of drv: dev:ep_83 complete after 412.339 msecs
[ 2594.481961] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2594.484351] ata1.00: configured for UDMA/100
[ 2594.522429] PM: resume of drv:sd dev:0:0:0:0 complete after 1149.377 msecs
[ 2594.522492] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 1149.436 msecs
[ 2594.522500] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 1077.718 msecs
[ 2594.552321] PM: resume of devices complete after 1182.187 msecs
[ 2594.552405] PM: resume devices took 1.180 seconds
[ 2594.552440] PM: Finishing wakeup.
[ 2594.552442] Restarting tasks ... done.
[ 2594.554615] video LNXVIDEO:00: Restoring backlight state
[ 2595.306210] r8169 0000:13:00.0: eth0: link down



Bilgisayar: Dell Inspiron N5010 (15R) (TTNET Bilgisayar kampanyası ile almıştım)
Bilgisayarın altında Model: n5010-1544 yazıyor.


cat /var/log/Xorg.0.log

[   188.707]
X.Org X Server 1.11.3
Release Date: 2011-12-16
[   188.707] X Protocol Version 11, Revision 0
[   188.707] Build Operating System: Linux 2.6.24-31-server x86_64 Ubuntu
[   188.707] Current Operating System: Linux emre-pc 3.2.0-25-generic #40-Ubuntu SMP Wed May 23 20:30:51 UTC 2012 x86_64
[   188.707] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-25-generic root=UUID=df2b3902-2038-47dc-bc97-95605324ae0f ro ipv6.disable=1 quiet splash vt.handoff=7
[   188.707] Build Date: 07 May 2012  11:43:21PM
[   188.707] xorg-server 2:1.11.4-0ubuntu10.2 (For technical support please see http://www.ubuntu.com/support)
[   188.707] Current version of pixman: 0.24.4
[   188.707] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[   188.708] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   188.708] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 25 18:09:24 2012
[   188.708] (==) Using config file: "/etc/X11/xorg.conf"
[   188.708] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   188.708] (==) No Layout section.  Using the first Screen section.
[   188.708] (**) |-->Screen "Default Screen" (0)
[   188.708] (**) |   |-->Monitor "<default monitor>"
[   188.709] (==) No monitor specified for screen "Default Screen".
Using a default monitor configuration.
[   188.709] (==) Automatically adding devices
[   188.709] (==) Automatically enabling devices
[   188.709] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[   188.709] Entry deleted from font path.
[   188.709] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[   188.709] Entry deleted from font path.
[   188.709] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[   188.709] Entry deleted from font path.
[   188.709] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[   188.709] Entry deleted from font path.
[   188.709] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[   188.709] Entry deleted from font path.
[   188.709] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[   188.709] Entry deleted from font path.
[   188.709] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[   188.709] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[   188.709] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[   188.709] (II) Loader magic: 0x7f80405e1b00
[   188.709] (II) Module ABI versions:
[   188.709] X.Org ANSI C Emulation: 0.4
[   188.709] X.Org Video Driver: 11.0
[   188.709] X.Org XInput driver : 16.0
[   188.709] X.Org Server Extension : 6.0
[   188.710] (--) PCI:*(0:1:0:0) 1002:68e0:1028:0447 rev 0, Mem @ 0xc0000000/268435456, 0xfbe20000/131072, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[   188.710] (II) Open ACPI successful (/var/run/acpid.socket)
[   188.710] (II) "extmod" will be loaded by default.
[   188.710] (II) "dbe" will be loaded by default.
[   188.710] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[   188.710] (II) "record" will be loaded by default.
[   188.710] (II) "dri" will be loaded by default.
[   188.710] (II) "dri2" will be loaded by default.
[   188.710] (II) LoadModule: "glx"
[   188.710] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/extensions/libglx.so
[   188.711] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[   188.711] compiled for 6.9.0, module version = 1.0.0
[   188.711] (II) Loading extension GLX
[   188.711] (II) LoadModule: "extmod"
[   188.788] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[   188.788] (II) Module extmod: vendor="X.Org Foundation"
[   188.788] compiled for 1.11.3, module version = 1.0.0
[   188.788] Module class: X.Org Server Extension
[   188.788] ABI class: X.Org Server Extension, version 6.0
[   188.788] (II) Loading extension MIT-SCREEN-SAVER
[   188.788] (II) Loading extension XFree86-VidModeExtension
[   188.788] (II) Loading extension XFree86-DGA
[   188.788] (II) Loading extension DPMS
[   188.788] (II) Loading extension XVideo
[   188.788] (II) Loading extension XVideo-MotionCompensation
[   188.788] (II) Loading extension X-Resource
[   188.788] (II) LoadModule: "dbe"
[   188.789] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[   188.789] (II) Module dbe: vendor="X.Org Foundation"
[   188.789] compiled for 1.11.3, module version = 1.0.0
[   188.789] Module class: X.Org Server Extension
[   188.789] ABI class: X.Org Server Extension, version 6.0
[   188.789] (II) Loading extension DOUBLE-BUFFER
[   188.789] (II) LoadModule: "record"
[   188.789] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[   188.789] (II) Module record: vendor="X.Org Foundation"
[   188.789] compiled for 1.11.3, module version = 1.13.0
[   188.789] Module class: X.Org Server Extension
[   188.789] ABI class: X.Org Server Extension, version 6.0
[   188.789] (II) Loading extension RECORD
[   188.789] (II) LoadModule: "dri"
[   188.790] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[   188.790] (II) Module dri: vendor="X.Org Foundation"
[   188.790] compiled for 1.11.3, module version = 1.0.0
[   188.790] ABI class: X.Org Server Extension, version 6.0
[   188.790] (II) Loading extension XFree86-DRI
[   188.790] (II) LoadModule: "dri2"
[   188.790] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[   188.790] (II) Module dri2: vendor="X.Org Foundation"
[   188.790] compiled for 1.11.3, module version = 1.2.0
[   188.790] ABI class: X.Org Server Extension, version 6.0
[   188.790] (II) Loading extension DRI2
[   188.790] (==) Matched fglrx as autoconfigured driver 0
[   188.790] (==) Matched ati as autoconfigured driver 1
[   188.790] (==) Matched vesa as autoconfigured driver 2
[   188.790] (==) Matched fbdev as autoconfigured driver 3
[   188.790] (==) Assigned the driver to the xf86ConfigLayout
[   188.790] (II) LoadModule: "fglrx"
[   188.790] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/drivers/fglrx_drv.so
[   188.807] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[   188.807] compiled for 1.4.99.906, module version = 8.96.4
[   188.807] Module class: X.Org Video Driver
[   188.808] (II) Loading sub module "fglrxdrm"
[   188.808] (II) LoadModule: "fglrxdrm"
[   188.808] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/linux/libfglrxdrm.so
[   188.808] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[   188.808] compiled for 1.4.99.906, module version = 8.96.4
[   188.808] (II) LoadModule: "ati"
[   188.808] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[   188.808] (II) Module ati: vendor="X.Org Foundation"
[   188.808] compiled for 1.11.3, module version = 6.14.99
[   188.808] Module class: X.Org Video Driver
[   188.808] ABI class: X.Org Video Driver, version 11.0
[   188.808] (II) LoadModule: "radeon"
[   188.809] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[   188.809] (II) Module radeon: vendor="X.Org Foundation"
[   188.809] compiled for 1.11.3, module version = 6.14.99
[   188.809] Module class: X.Org Video Driver
[   188.809] ABI class: X.Org Video Driver, version 11.0
[   188.809] (II) LoadModule: "vesa"
[   188.809] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   188.809] (II) Module vesa: vendor="X.Org Foundation"
[   188.809] compiled for 1.11.3, module version = 2.3.0
[   188.809] Module class: X.Org Video Driver
[   188.809] ABI class: X.Org Video Driver, version 11.0
[   188.809] (II) LoadModule: "fbdev"
[   188.809] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[   188.810] (II) Module fbdev: vendor="X.Org Foundation"
[   188.810] compiled for 1.11.3, module version = 0.4.2
[   188.810] ABI class: X.Org Video Driver, version 11.0
[   188.810] (II) ATI Proprietary Linux Driver Version Identifier:8.96.4
[   188.810] (II) ATI Proprietary Linux Driver Release Identifier: 8.96.7                               
[   188.810] (II) ATI Proprietary Linux Driver Build Date: Mar 12 2012 13:06:50
[   188.810] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS
[   188.812] (II) VESA: driver for VESA chipsets: vesa
[   188.812] (II) FBDEV: driver for framebuffer: fbdev
[   188.812] (++) using VT number 7

[   188.812] (WW) Falling back to old probe method for fglrx
[   188.818] (II) Loading PCS database from /etc/ati/amdpcsdb
[   188.818] (--) Assigning device section with no busID to primary device
[   188.818] (--) Chipset Supported AMD Graphics Processor (0x68E0) found
[   188.818] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[   188.819] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[   188.819] (II) AMD Video driver is signed
[   188.819] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/drivers/fglrx_drv.so
[   188.819] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/linux/libfglrxdrm.so
[   188.819] (II) fglrx(0): pEnt->device->identifier=0x7f804039438f
[   188.819] (WW) Falling back to old probe method for vesa
[   188.819] (WW) Falling back to old probe method for fbdev
[   188.819] (II) Loading sub module "fbdevhw"
[   188.819] (II) LoadModule: "fbdevhw"
[   188.819] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[   188.819] (II) Module fbdevhw: vendor="X.Org Foundation"
[   188.819] compiled for 1.11.3, module version = 0.0.2
[   188.819] ABI class: X.Org Video Driver, version 11.0
[   188.819] (II) fglrx(0): === [xdl_xs111_atiddxPreInit] === begin
[   188.819] (II) Loading sub module "vgahw"
[   188.819] (II) LoadModule: "vgahw"
[   188.820] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[   188.820] (II) Module vgahw: vendor="X.Org Foundation"
[   188.820] compiled for 1.11.3, module version = 0.1.0
[   188.820] ABI class: X.Org Video Driver, version 11.0
[   188.820] (II) fglrx(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
[   188.820] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[   188.820] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[   188.820] (==) fglrx(0): Default visual is TrueColor
[   188.820] (==) fglrx(0): RGB weight 888
[   188.820] (II) fglrx(0): Using 8 bits per RGB
[   188.820] (==) fglrx(0): Buffer Tiling is ON
[   188.820] (II) Loading sub module "fglrxdrm"
[   188.820] (II) LoadModule: "fglrxdrm"
[   188.820] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/linux/libfglrxdrm.so
[   188.820] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[   188.820] compiled for 1.4.99.906, module version = 8.96.4
[   188.822] ukiDynamicMajor: found major device number 249
[   188.822] ukiDynamicMajor: found major device number 249
[   188.822] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[   188.822] ukiOpenDevice: node name is /dev/ati/card0
[   188.822] ukiOpenDevice: open result is 12, (OK)
[   188.822] ukiOpenByBusid: ukiOpenMinor returns 12
[   188.822] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[   188.822] (**) fglrx(0): NoAccel = NO
[   188.822] (**) fglrx(0): ATI 2D Acceleration Architecture enabled
[   188.822] (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 5000 Series" (Chipset = 0x68e0)
[   188.822] (--) fglrx(0): (PciSubVendor = 0x1028, PciSubDevice = 0x0447)
[   188.822] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[   188.822] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
[   188.822] (--) fglrx(0): MMIO registers at 0xfbe20000
[   188.822] (--) fglrx(0): I/O port at 0x0000e000
[   188.822] (==) fglrx(0): ROM-BIOS at 0x000c0000
[   188.823] (II) fglrx(0): AC Adapter is used
[   188.825] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[   188.826] (II) Loading sub module "vbe"
[   188.826] (II) LoadModule: "vbe"
[   188.826] (II) Loading /usr/lib/xorg/modules/libvbe.so
[   188.826] (II) Module vbe: vendor="X.Org Foundation"
[   188.826] compiled for 1.11.3, module version = 1.1.0
[   188.826] ABI class: X.Org Video Driver, version 11.0
[   188.826] (II) fglrx(0): VESA BIOS detected
[   188.826] (II) fglrx(0): VESA VBE Version 3.0
[   188.826] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[   188.826] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[   188.826] (II) fglrx(0): VESA VBE OEM Software Rev: 12.18
[   188.826] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[   188.826] (II) fglrx(0): VESA VBE OEM Product: PARK
[   188.826] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[   188.860] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[   188.860] (--) fglrx(0): Video RAM: 524288 kByte, Type: DDR3
[   188.860] (II) fglrx(0): PCIE card detected
[   188.860] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[   188.860] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[   188.866] (II) fglrx(0): Using adapter: 1:0.0.
[   188.893] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
[   188.947] (II) fglrx(0): Interrupt handler installed at IRQ 50.
[   188.947] (II) fglrx(0): RandR 1.2 support is enabled!
[   188.947] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[   188.947] (==) fglrx(0): Center Mode is disabled
[   188.947] (II) Loading sub module "fb"
[   188.947] (II) LoadModule: "fb"
[   188.948] (II) Loading /usr/lib/xorg/modules/libfb.so
[   188.948] (II) Module fb: vendor="X.Org Foundation"
[   188.948] compiled for 1.11.3, module version = 1.0.0
[   188.948] ABI class: X.Org ANSI C Emulation, version 0.4
[   188.948] (II) Loading sub module "ddc"
[   188.948] (II) LoadModule: "ddc"
[   188.948] (II) Module "ddc" already built-in
[   189.081] (II) fglrx(0): Finished Initialize PPLIB!
[   189.081] (II) fglrx(0): Output LVDS has no monitor section
[   189.081] (II) fglrx(0): Output DFP1 has no monitor section
[   189.081] (II) fglrx(0): Output CRT1 has no monitor section
[   189.081] (II) Loading sub module "ddc"
[   189.081] (II) LoadModule: "ddc"
[   189.081] (II) Module "ddc" already built-in
[   189.081] (II) fglrx(0): Connected Display0: LVDS
[   189.081] (II) fglrx(0): Display0 EDID data ---------------------------
[   189.081] (II) fglrx(0): Manufacturer: AUO  Model: 22ec  Serial#: 0
[   189.081] (II) fglrx(0): Year: 2009  Week: 1
[   189.081] (II) fglrx(0): EDID Version: 1.3
[   189.081] (II) fglrx(0): Digital Display Input
[   189.081] (II) fglrx(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[   189.081] (II) fglrx(0): Gamma: 2.20
[   189.081] (II) fglrx(0): No DPMS capabilities specified
[   189.081] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[   189.081] (II) fglrx(0): First detailed timing is preferred mode
[   189.081] (II) fglrx(0): redX: 0.620 redY: 0.340   greenX: 0.330 greenY: 0.570
[   189.081] (II) fglrx(0): blueX: 0.150 blueY: 0.060   whiteX: 0.313 whiteY: 0.329
[   189.081] (II) fglrx(0): Manufacturer's mask: 0
[   189.081] (II) fglrx(0): Supported detailed timing:
[   189.081] (II) fglrx(0): clock: 65.1 MHz   Image Size:  344 x 193 mm
[   189.081] (II) fglrx(0): h_active: 1366  h_sync: 1382  h_sync_end 1390 h_blank_end 1398 h_border: 0
[   189.081] (II) fglrx(0): v_active: 768  v_sync: 771  v_sync_end 775 v_blanking: 776 v_border: 0
[   189.081] (II) fglrx(0): Supported detailed timing:
[   189.081] (II) fglrx(0): clock: 65.1 MHz   Image Size:  344 x 193 mm
[   189.081] (II) fglrx(0): h_active: 1366  h_sync: 1382  h_sync_end 1390 h_blank_end 1398 h_border: 0
[   189.081] (II) fglrx(0): v_active: 768  v_sync: 771  v_sync_end 775 v_blanking: 776 v_border: 0
[   189.082] (II) fglrx(0):  1JC2N\80B156XW2
[   189.082] (II) fglrx(0): Unknown vendor-specific block 0
[   189.082] (II) fglrx(0): EDID (in hex):
[   189.082] (II) fglrx(0): 00ffffffffffff0006afec2200000000
[   189.082] (II) fglrx(0): 01130103902213780ac8959e57549226
[   189.082] (II) fglrx(0): 0f505400000001010101010101010101
[   189.082] (II) fglrx(0): 0101010101016e195620500008301008
[   189.082] (II) fglrx(0): 340058c11000001a6e19562050000830
[   189.082] (II) fglrx(0): 1008340058c11000001a000000fe0031
[   189.082] (II) fglrx(0): 4a43324e804231353658573200000000
[   189.082] (II) fglrx(0): 00000000000000000001010a202000d4
[   189.082] (II) fglrx(0): End of Display0 EDID data --------------------
[   189.082] (II) fglrx(0): Connected Display1: CRT1
[   189.082] (II) fglrx(0): Display1 EDID data ---------------------------
[   189.082] (II) fglrx(0): Manufacturer: BNQ  Model: 7896  Serial#: 21573
[   189.082] (II) fglrx(0): Year: 2012  Week: 16
[   189.082] (II) fglrx(0): EDID Version: 1.3
[   189.082] (II) fglrx(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
[   189.082] (II) fglrx(0): Sync:  Separate  Composite  SyncOnGreen
[   189.082] (II) fglrx(0): Max Image Size [cm]: horiz.: 41  vert.: 23
[   189.082] (II) fglrx(0): Gamma: 2.20
[   189.082] (II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
[   189.082] (II) fglrx(0): Default color space is primary color space
[   189.082] (II) fglrx(0): First detailed timing is preferred mode
[   189.082] (II) fglrx(0): redX: 0.633 redY: 0.346   greenX: 0.324 greenY: 0.612
[   189.082] (II) fglrx(0): blueX: 0.148 blueY: 0.066   whiteX: 0.313 whiteY: 0.329
[   189.082] (II) fglrx(0): Supported established timings:
[   189.082] (II) fglrx(0): 720x400@70Hz
[   189.082] (II) fglrx(0): 640x480@60Hz
[   189.082] (II) fglrx(0): 640x480@75Hz
[   189.082] (II) fglrx(0): 800x600@60Hz
[   189.082] (II) fglrx(0): 800x600@75Hz
[   189.082] (II) fglrx(0): 832x624@75Hz
[   189.082] (II) fglrx(0): 1024x768@60Hz
[   189.082] (II) fglrx(0): 1024x768@75Hz
[   189.082] (II) fglrx(0): Manufacturer's mask: 0
[   189.082] (II) fglrx(0): Supported standard timings:
[   189.082] (II) fglrx(0): #0: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[   189.082] (II) fglrx(0): Supported detailed timing:
[   189.082] (II) fglrx(0): clock: 85.5 MHz   Image Size:  410 x 230 mm
[   189.082] (II) fglrx(0): h_active: 1366  h_sync: 1436  h_sync_end 1579 h_blank_end 1792 h_border: 0
[   189.082] (II) fglrx(0): v_active: 768  v_sync: 771  v_sync_end 774 v_blanking: 798 v_border: 0
[   189.082] (II) fglrx(0): Serial No: 24C08619SL0
[   189.082] (II) fglrx(0): Ranges: V min: 50 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 215 MHz
[   189.082] (II) fglrx(0): Monitor name: BenQ GL950A
[   189.082] (II) fglrx(0): EDID (in hex):
[   189.082] (II) fglrx(0): 00ffffffffffff0009d1967845540000
[   189.082] (II) fglrx(0): 101601030e2917782e2305a258539c26
[   189.082] (II) fglrx(0): 115054a56a0081c00101010101010101
[   189.082] (II) fglrx(0): 010101010101662156aa51001e30468f
[   189.082] (II) fglrx(0): 33009ae61000001e000000ff00323443
[   189.082] (II) fglrx(0): 3038363139534c300a20000000fd0032
[   189.082] (II) fglrx(0): 4c1e5315000a202020202020000000fc
[   189.082] (II) fglrx(0): 0042656e5120474c393530410a2000af
[   189.082] (II) fglrx(0): End of Display1 EDID data --------------------
[   189.083] (II) fglrx(0): EDID for output LVDS
[   189.083] (II) fglrx(0): Manufacturer: AUO  Model: 22ec  Serial#: 0
[   189.083] (II) fglrx(0): Year: 2009  Week: 1
[   189.083] (II) fglrx(0): EDID Version: 1.3
[   189.083] (II) fglrx(0): Digital Display Input
[   189.083] (II) fglrx(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[   189.083] (II) fglrx(0): Gamma: 2.20
[   189.083] (II) fglrx(0): No DPMS capabilities specified
[   189.083] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[   189.083] (II) fglrx(0): First detailed timing is preferred mode
[   189.083] (II) fglrx(0): redX: 0.620 redY: 0.340   greenX: 0.330 greenY: 0.570
[   189.083] (II) fglrx(0): blueX: 0.150 blueY: 0.060   whiteX: 0.313 whiteY: 0.329
[   189.083] (II) fglrx(0): Manufacturer's mask: 0
[   189.083] (II) fglrx(0): Supported detailed timing:
[   189.083] (II) fglrx(0): clock: 65.1 MHz   Image Size:  344 x 193 mm
[   189.083] (II) fglrx(0): h_active: 1366  h_sync: 1382  h_sync_end 1390 h_blank_end 1398 h_border: 0
[   189.083] (II) fglrx(0): v_active: 768  v_sync: 771  v_sync_end 775 v_blanking: 776 v_border: 0
[   189.083] (II) fglrx(0): Supported detailed timing:
[   189.083] (II) fglrx(0): clock: 65.1 MHz   Image Size:  344 x 193 mm
[   189.083] (II) fglrx(0): h_active: 1366  h_sync: 1382  h_sync_end 1390 h_blank_end 1398 h_border: 0
[   189.083] (II) fglrx(0): v_active: 768  v_sync: 771  v_sync_end 775 v_blanking: 776 v_border: 0
[   189.083] (II) fglrx(0):  1JC2N\80B156XW2
[   189.083] (II) fglrx(0): Unknown vendor-specific block 0
[   189.083] (II) fglrx(0): EDID (in hex):
[   189.083] (II) fglrx(0): 00ffffffffffff0006afec2200000000
[   189.083] (II) fglrx(0): 01130103902213780ac8959e57549226
[   189.083] (II) fglrx(0): 0f505400000001010101010101010101
[   189.083] (II) fglrx(0): 0101010101016e195620500008301008
[   189.083] (II) fglrx(0): 340058c11000001a6e19562050000830
[   189.083] (II) fglrx(0): 1008340058c11000001a000000fe0031
[   189.083] (II) fglrx(0): 4a43324e804231353658573200000000
[   189.083] (II) fglrx(0): 00000000000000000001010a202000d4
[   189.083] (II) fglrx(0): EDID vendor "AUO", prod id 8940
[   189.083] (II) fglrx(0): Printing DDC gathered Modelines:
[   189.083] (II) fglrx(0): Modeline "1366x768"x0.0   65.10  1366 1382 1390 1398  768 771 775 776 +hsync -vsync (46.6 kHz)
[   189.083] (II) fglrx(0): Printing probed modes for output LVDS
[   189.083] (II) fglrx(0): Modeline "1366x768"x60.0   65.10  1366 1382 1390 1398  768 771 775 776 +hsync -vsync (46.6 kHz)
[   189.083] (II) fglrx(0): Modeline "1360x768"x60.0   65.10  1360 1382 1390 1398  768 771 775 776 +hsync -vsync (46.6 kHz)
[   189.083] (II) fglrx(0): Modeline "1280x768"x60.0   65.10  1280 1382 1390 1398  768 771 775 776 +hsync -vsync (46.6 kHz)
[   189.083] (II) fglrx(0): Modeline "1280x720"x60.0   65.10  1280 1382 1390 1398  720 771 775 776 +hsync -vsync (46.6 kHz)
[   189.083] (II) fglrx(0): Modeline "1024x768"x60.0   65.10  1024 1382 1390 1398  768 771 775 776 +hsync -vsync (46.6 kHz)
[   189.083] (II) fglrx(0): Modeline "1024x600"x60.0   65.10  1024 1382 1390 1398  600 771 775 776 +hsync -vsync (46.6 kHz)
[   189.083] (II) fglrx(0): Modeline "800x600"x60.0   65.10  800 1382 1390 1398  600 771 775 776 +hsync -vsync (46.6 kHz)
[   189.083] (II) fglrx(0): Modeline "800x480"x60.0   65.10  800 1382 1390 1398  480 771 775 776 +hsync -vsync (46.6 kHz)
[   189.083] (II) fglrx(0): Modeline "640x480"x60.0   65.10  640 1382 1390 1398  480 771 775 776 +hsync -vsync (46.6 kHz)
[   189.083] (II) fglrx(0): EDID for output DFP1
[   189.083] (II) fglrx(0): EDID for output CRT1
[   189.083] (II) fglrx(0): Manufacturer: BNQ  Model: 7896  Serial#: 21573
[   189.083] (II) fglrx(0): Year: 2012  Week: 16
[   189.083] (II) fglrx(0): EDID Version: 1.3
[   189.083] (II) fglrx(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
[   189.083] (II) fglrx(0): Sync:  Separate  Composite  SyncOnGreen
[   189.083] (II) fglrx(0): Max Image Size [cm]: horiz.: 41  vert.: 23
[   189.083] (II) fglrx(0): Gamma: 2.20
[   189.083] (II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
[   189.083] (II) fglrx(0): Default color space is primary color space
[   189.083] (II) fglrx(0): First detailed timing is preferred mode
[   189.083] (II) fglrx(0): redX: 0.633 redY: 0.346   greenX: 0.324 greenY: 0.612
[   189.083] (II) fglrx(0): blueX: 0.148 blueY: 0.066   whiteX: 0.313 whiteY: 0.329
[   189.083] (II) fglrx(0): Supported established timings:
[   189.083] (II) fglrx(0): 720x400@70Hz
[   189.083] (II) fglrx(0): 640x480@60Hz
[   189.083] (II) fglrx(0): 640x480@75Hz
[   189.083] (II) fglrx(0): 800x600@60Hz
[   189.083] (II) fglrx(0): 800x600@75Hz
[   189.083] (II) fglrx(0): 832x624@75Hz
[   189.083] (II) fglrx(0): 1024x768@60Hz
[   189.083] (II) fglrx(0): 1024x768@75Hz
[   189.083] (II) fglrx(0): Manufacturer's mask: 0
[   189.083] (II) fglrx(0): Supported standard timings:
[   189.083] (II) fglrx(0): #0: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[   189.083] (II) fglrx(0): Supported detailed timing:
[   189.083] (II) fglrx(0): clock: 85.5 MHz   Image Size:  410 x 230 mm
[   189.083] (II) fglrx(0): h_active: 1366  h_sync: 1436  h_sync_end 1579 h_blank_end 1792 h_border: 0
[   189.083] (II) fglrx(0): v_active: 768  v_sync: 771  v_sync_end 774 v_blanking: 798 v_border: 0
[   189.083] (II) fglrx(0): Serial No: 24C08619SL0
[   189.083] (II) fglrx(0): Ranges: V min: 50 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 215 MHz
[   189.083] (II) fglrx(0): Monitor name: BenQ GL950A
[   189.083] (II) fglrx(0): EDID (in hex):
[   189.083] (II) fglrx(0): 00ffffffffffff0009d1967845540000
[   189.083] (II) fglrx(0): 101601030e2917782e2305a258539c26
[   189.083] (II) fglrx(0): 115054a56a0081c00101010101010101
[   189.083] (II) fglrx(0): 010101010101662156aa51001e30468f
[   189.083] (II) fglrx(0): 33009ae61000001e000000ff00323443
[   189.083] (II) fglrx(0): 3038363139534c300a20000000fd0032
[   189.083] (II) fglrx(0): 4c1e5315000a202020202020000000fc
[   189.083] (II) fglrx(0): 0042656e5120474c393530410a2000af
[   189.083] (II) fglrx(0): Printing probed modes for output CRT1
[   189.083] (II) fglrx(0): Modeline "1366x768"x60.0   85.50  1366 1436 1579 1792  768 771 774 798 +hsync +vsync (47.7 kHz)
[   189.083] (II) fglrx(0): Modeline "1360x768"x60.0   85.50  1360 1436 1579 1792  768 771 774 798 +hsync +vsync (47.7 kHz)
[   189.083] (II) fglrx(0): Modeline "1280x768"x60.0   85.50  1280 1436 1579 1792  768 771 774 798 +hsync +vsync (47.7 kHz)
[   189.083] (II) fglrx(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz)
[   189.083] (II) fglrx(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[   189.083] (II) fglrx(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[   189.083] (II) fglrx(0): Modeline "1024x600"x75.0   78.75  1024 1040 1136 1312  600 769 772 800 +hsync +vsync (60.0 kHz)
[   189.083] (II) fglrx(0): Modeline "1024x600"x60.0   65.00  1024 1048 1184 1344  600 771 777 806 -hsync -vsync (48.4 kHz)
[   189.083] (II) fglrx(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[   189.083] (II) fglrx(0): Modeline "800x600"x60.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[   189.083] (II) fglrx(0): Modeline "800x480"x75.0   49.50  800 816 896 1056  480 601 604 625 +hsync +vsync (46.9 kHz)
[   189.083] (II) fglrx(0): Modeline "800x480"x60.0   40.00  800 840 968 1056  480 601 605 628 +hsync +vsync (37.9 kHz)
[   189.083] (II) fglrx(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[   189.083] (II) fglrx(0): Modeline "640x480"x60.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[   189.083] (II) fglrx(0): Output LVDS connected
[   189.083] (II) fglrx(0): Output DFP1 disconnected
[   189.083] (II) fglrx(0): Output CRT1 connected
[   189.083] (II) fglrx(0): Using exact sizes for initial modes
[   189.083] (II) fglrx(0): Output LVDS using initial mode 1366x768
[   189.083] (II) fglrx(0): Output CRT1 using initial mode 1366x768
[   189.084] (II) fglrx(0): Setting highest common mode
[   189.084] (II) fglrx(0): Display dimensions: (340, 190) mm
[   189.084] (II) fglrx(0): DPI set to (102, 102)
[   189.084] (II) fglrx(0): Eyefinity capable adapter detected.
[   189.084] (II) fglrx(0): Adapter ATI Mobility Radeon HD 5000 Series has 4 configurable heads and 2 displays connected.
[   189.084] (==) fglrx(0):  PseudoColor visuals disabled
[   189.084] (II) Loading sub module "ramdac"
[   189.084] (II) LoadModule: "ramdac"
[   189.084] (II) Module "ramdac" already built-in
[   189.084] (==) fglrx(0): NoDRI = NO
[   189.084] (==) fglrx(0): Capabilities: 0x00000000
[   189.084] (==) fglrx(0): CapabilitiesEx: 0x00000000
[   189.084] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[   189.084] (==) fglrx(0): UseFastTLS=0
[   189.084] (==) fglrx(0): BlockSignalsOnLock=1
[   189.084] (II) UnloadModule: "radeon"
[   189.084] (II) Unloading radeon
[   189.084] (II) UnloadModule: "vesa"
[   189.084] (II) Unloading vesa
[   189.084] (II) UnloadModule: "fbdev"
[   189.084] (II) Unloading fbdev
[   189.084] (II) UnloadModule: "fbdevhw"
[   189.084] (II) Unloading fbdevhw
[   189.084] (--) Depth 24 pixmap format is 32 bpp
[   189.085] (II) Loading extension ATIFGLRXDRI
[   189.085] (II) fglrx(0): doing swlDriScreenInit
[   189.085] (II) fglrx(0): swlDriScreenInit for fglrx driver
[   189.086] ukiDynamicMajor: found major device number 249
[   189.086] ukiDynamicMajor: found major device number 249
[   189.086] ukiDynamicMajor: found major device number 249
[   189.086] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[   189.086] ukiOpenDevice: node name is /dev/ati/card0
[   189.086] ukiOpenDevice: open result is 17, (OK)
[   189.086] ukiOpenByBusid: ukiOpenMinor returns 17
[   189.086] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[   189.086] (II) fglrx(0): [uki] DRM interface version 1.0
[   189.086] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[   189.086] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[   189.086] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f80401d2000
[   189.086] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[   189.086] (II) fglrx(0): [uki] added 1 reserved context for kernel
[   189.086] (II) fglrx(0): swlDriScreenInit done
[   189.086] (II) fglrx(0): Kernel Module Version Information:
[   189.086] (II) fglrx(0):     Name: fglrx
[   189.086] (II) fglrx(0):     Version: 8.96.4
[   189.086] (II) fglrx(0):     Date: Mar 12 2012
[   189.086] (II) fglrx(0):     Desc: ATI FireGL DRM kernel module
[   189.086] (II) fglrx(0): Kernel Module version matches driver.
[   189.086] (II) fglrx(0): Kernel Module Build Time Information:
[   189.086] (II) fglrx(0):     Build-Kernel UTS_RELEASE:        3.2.0-25-generic
[   189.086] (II) fglrx(0):     Build-Kernel MODVERSIONS:        no
[   189.086] (II) fglrx(0):     Build-Kernel __SMP__:            yes
[   189.086] (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
[   189.086] (II) fglrx(0): [uki] register handle = 0x00004000
[   189.107] (II) fglrx(0): DRI initialization successfull
[   189.107] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01028000
[   189.107] (==) fglrx(0): Backing store disabled
[   189.107] (II) Loading extension FGLRXEXTENSION
[   189.107] (==) fglrx(0): DPMS enabled
[   189.107] (II) fglrx(0): Initialized in-driver Xinerama extension
[   189.107] (**) fglrx(0): Textured Video is enabled.
[   189.108] (II) LoadModule: "glesx"
[   189.108] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/glesx.so
[   189.108] (II) Module glesx: vendor="X.Org Foundation"
[   189.108] compiled for 1.4.99.906, module version = 1.0.0
[   189.108] (II) Loading extension GLESX
[   189.108] (II) fglrx(0): GLESX enableFlags = 592
[   189.108] (II) fglrx(0): GLESX is enabled
[   189.108] (II) LoadModule: "amdxmm"
[   189.108] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/amdxmm.so
[   189.109] (II) Module amdxmm: vendor="X.Org Foundation"
[   189.109] compiled for 1.4.99.906, module version = 2.0.0
[   189.113] (II) Loading extension AMDXVOPL
[   189.113] (II) Loading extension AMDXVBA
[   189.114] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[   189.116] (II) fglrx(0): Enable composite support successfully
[   189.116] (II) fglrx(0): X context handle = 0x1
[   189.116] (II) fglrx(0): [DRI] installation complete
[   189.117] (==) fglrx(0): Silken mouse enabled
[   189.117] (==) fglrx(0): Using HW cursor of display infrastructure!
[   189.117] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[   189.117] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[   189.117] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[   191.456] (--) RandR disabled
[   191.456] (II) Initializing built-in extension Generic Event Extension
[   191.456] (II) Initializing built-in extension SHAPE
[   191.456] (II) Initializing built-in extension MIT-SHM
[   191.456] (II) Initializing built-in extension XInputExtension
[   191.456] (II) Initializing built-in extension XTEST
[   191.456] (II) Initializing built-in extension BIG-REQUESTS
[   191.456] (II) Initializing built-in extension SYNC
[   191.456] (II) Initializing built-in extension XKEYBOARD
[   191.456] (II) Initializing built-in extension XC-MISC
[   191.456] (II) Initializing built-in extension SECURITY
[   191.456] (II) Initializing built-in extension XINERAMA
[   191.456] (II) Initializing built-in extension XFIXES
[   191.456] (II) Initializing built-in extension RENDER
[   191.456] (II) Initializing built-in extension RANDR
[   191.457] (II) Initializing built-in extension COMPOSITE
[   191.457] (II) Initializing built-in extension DAMAGE
[   191.473] ukiDynamicMajor: found major device number 249
[   191.473] ukiDynamicMajor: found major device number 249
[   191.473] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[   191.473] ukiOpenDevice: node name is /dev/ati/card0
[   191.473] ukiOpenDevice: open result is 19, (OK)
[   191.473] ukiOpenByBusid: ukiOpenMinor returns 19
[   191.473] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[   191.556] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[   191.556] (II) fglrx(0): Enable the clock gating!
[   191.556] (II) fglrx(0): Setting screen physical size to 361 x 203
[   191.564] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[   191.566] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[   191.566] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   191.566] (II) LoadModule: "evdev"
[   191.566] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   191.567] (II) Module evdev: vendor="X.Org Foundation"
[   191.567] compiled for 1.11.3, module version = 2.7.0
[   191.567] Module class: X.Org XInput Driver
[   191.567] ABI class: X.Org XInput driver, version 16.0
[   191.567] (II) Using input driver 'evdev' for 'Power Button'
[   191.567] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   191.567] (**) Power Button: always reports core events
[   191.567] (**) evdev: Power Button: Device: "/dev/input/event3"
[   191.567] (--) evdev: Power Button: Vendor 0 Product 0x1
[   191.567] (--) evdev: Power Button: Found keys
[   191.567] (II) evdev: Power Button: Configuring as keyboard
[   191.567] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[   191.567] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   191.567] (**) Option "xkb_rules" "evdev"
[   191.567] (**) Option "xkb_model" "pc105"
[   191.567] (**) Option "xkb_layout" "tr"
[   191.569] (II) XKB: reuse xkmfile /var/lib/xkb/server-609880D4F1521A95A29BCD7AB1227A69EC9A1B72.xkm
[   191.569] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[   191.569] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   191.569] (II) Using input driver 'evdev' for 'Video Bus'
[   191.569] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   191.569] (**) Video Bus: always reports core events
[   191.569] (**) evdev: Video Bus: Device: "/dev/input/event10"
[   191.569] (--) evdev: Video Bus: Vendor 0 Product 0x6
[   191.569] (--) evdev: Video Bus: Found keys
[   191.569] (II) evdev: Video Bus: Configuring as keyboard
[   191.569] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input10/event10"
[   191.569] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   191.569] (**) Option "xkb_rules" "evdev"
[   191.569] (**) Option "xkb_model" "pc105"
[   191.569] (**) Option "xkb_layout" "tr"
[   191.570] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[   191.570] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   191.570] (II) Using input driver 'evdev' for 'Power Button'
[   191.570] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   191.570] (**) Power Button: always reports core events
[   191.570] (**) evdev: Power Button: Device: "/dev/input/event0"
[   191.570] (--) evdev: Power Button: Vendor 0 Product 0x1
[   191.570] (--) evdev: Power Button: Found keys
[   191.570] (II) evdev: Power Button: Configuring as keyboard
[   191.570] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[   191.570] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[   191.570] (**) Option "xkb_rules" "evdev"
[   191.570] (**) Option "xkb_model" "pc105"
[   191.570] (**) Option "xkb_layout" "tr"
[   191.570] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[   191.570] (II) No input driver specified, ignoring this device.
[   191.570] (II) This device may have been added with another device file.
[   191.571] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[   191.571] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[   191.571] (II) Using input driver 'evdev' for 'Sleep Button'
[   191.571] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   191.571] (**) Sleep Button: always reports core events
[   191.571] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[   191.571] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[   191.571] (--) evdev: Sleep Button: Found keys
[   191.571] (II) evdev: Sleep Button: Configuring as keyboard
[   191.571] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[   191.571] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[   191.571] (**) Option "xkb_rules" "evdev"
[   191.571] (**) Option "xkb_model" "pc105"
[   191.571] (**) Option "xkb_layout" "tr"
[   191.571] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event15)
[   191.571] (II) No input driver specified, ignoring this device.
[   191.571] (II) This device may have been added with another device file.
[   191.572] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.0 (/dev/input/event5)
[   191.572] (**) Microsoft Microsoft® Nano Transceiver v2.0: Applying InputClass "evdev keyboard catchall"
[   191.572] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Nano Transceiver v2.0'
[   191.572] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   191.572] (**) Microsoft Microsoft® Nano Transceiver v2.0: always reports core events
[   191.572] (**) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Device: "/dev/input/event5"
[   191.572] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Vendor 0x45e Product 0x745
[   191.572] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found keys
[   191.572] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Configuring as keyboard
[   191.572] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input5/event5"
[   191.572] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Nano Transceiver v2.0" (type: KEYBOARD, id 10)
[   191.572] (**) Option "xkb_rules" "evdev"
[   191.572] (**) Option "xkb_model" "pc105"
[   191.572] (**) Option "xkb_layout" "tr"
[   191.572] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.0 (/dev/input/event6)
[   191.572] (**) Microsoft Microsoft® Nano Transceiver v2.0: Applying InputClass "evdev pointer catchall"
[   191.572] (**) Microsoft Microsoft® Nano Transceiver v2.0: Applying InputClass "evdev keyboard catchall"
[   191.572] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Nano Transceiver v2.0'
[   191.572] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   191.572] (**) Microsoft Microsoft® Nano Transceiver v2.0: always reports core events
[   191.572] (**) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Device: "/dev/input/event6"
[   191.572] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Vendor 0x45e Product 0x745
[   191.572] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found 9 mouse buttons
[   191.572] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found scroll wheel(s)
[   191.572] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found relative axes
[   191.572] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found x and y relative axes
[   191.572] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found absolute axes
[   191.572] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Forcing absolute x/y axes to exist.
[   191.572] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found keys
[   191.573] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Configuring as mouse
[   191.573] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Configuring as keyboard
[   191.573] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Adding scrollwheel support
[   191.573] (**) evdev: Microsoft Microsoft® Nano Transceiver v2.0: YAxisMapping: buttons 4 and 5
[   191.573] (**) evdev: Microsoft Microsoft® Nano Transceiver v2.0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   191.573] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input6/event6"
[   191.573] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Nano Transceiver v2.0" (type: KEYBOARD, id 11)
[   191.573] (**) Option "xkb_rules" "evdev"
[   191.573] (**) Option "xkb_model" "pc105"
[   191.573] (**) Option "xkb_layout" "tr"
[   191.573] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: initialized for relative axes.
[   191.573] (WW) evdev: Microsoft Microsoft® Nano Transceiver v2.0: ignoring absolute axes.
[   191.573] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) keeping acceleration scheme 1
[   191.573] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) acceleration profile 0
[   191.573] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) acceleration factor: 2.000
[   191.573] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) acceleration threshold: 4
[   191.573] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.0 (/dev/input/mouse0)
[   191.573] (II) No input driver specified, ignoring this device.
[   191.573] (II) This device may have been added with another device file.
[   191.574] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.0 (/dev/input/event7)
[   191.574] (**) Microsoft Microsoft® Nano Transceiver v2.0: Applying InputClass "evdev keyboard catchall"
[   191.574] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Nano Transceiver v2.0'
[   191.574] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   191.574] (**) Microsoft Microsoft® Nano Transceiver v2.0: always reports core events
[   191.574] (**) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Device: "/dev/input/event7"
[   191.574] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Vendor 0x45e Product 0x745
[   191.574] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found 1 mouse buttons
[   191.574] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found scroll wheel(s)
[   191.574] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found relative axes
[   191.574] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found absolute axes
[   191.574] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found absolute multitouch axes
[   191.574] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found x and y absolute axes
[   191.574] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found keys
[   191.574] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Configuring as mouse
[   191.574] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Configuring as keyboard
[   191.574] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Adding scrollwheel support
[   191.574] (**) evdev: Microsoft Microsoft® Nano Transceiver v2.0: YAxisMapping: buttons 4 and 5
[   191.574] (**) evdev: Microsoft Microsoft® Nano Transceiver v2.0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   191.574] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.2/input/input7/event7"
[   191.574] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Nano Transceiver v2.0" (type: KEYBOARD, id 12)
[   191.574] (**) Option "xkb_rules" "evdev"
[   191.574] (**) Option "xkb_model" "pc105"
[   191.574] (**) Option "xkb_layout" "tr"
[   191.574] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: initialized for relative axes.
[   191.574] (WW) evdev: Microsoft Microsoft® Nano Transceiver v2.0: ignoring absolute axes.
[   191.574] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) keeping acceleration scheme 1
[   191.574] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) acceleration profile 0
[   191.574] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) acceleration factor: 2.000
[   191.574] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) acceleration threshold: 4
[   191.574] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.0 (/dev/input/js0)
[   191.575] (II) No input driver specified, ignoring this device.
[   191.575] (II) This device may have been added with another device file.
[   191.575] (II) config/udev: Adding input device Laptop_Integrated_Webcam_1.3M (/dev/input/event11)
[   191.575] (**) Laptop_Integrated_Webcam_1.3M: Applying InputClass "evdev keyboard catchall"
[   191.575] (II) Using input driver 'evdev' for 'Laptop_Integrated_Webcam_1.3M'
[   191.575] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   191.575] (**) Laptop_Integrated_Webcam_1.3M: always reports core events
[   191.575] (**) evdev: Laptop_Integrated_Webcam_1.3M: Device: "/dev/input/event11"
[   191.575] (--) evdev: Laptop_Integrated_Webcam_1.3M: Vendor 0xc45 Product 0x6461
[   191.575] (--) evdev: Laptop_Integrated_Webcam_1.3M: Found keys
[   191.575] (II) evdev: Laptop_Integrated_Webcam_1.3M: Configuring as keyboard
[   191.575] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input11/event11"
[   191.575] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_1.3M" (type: KEYBOARD, id 13)
[   191.575] (**) Option "xkb_rules" "evdev"
[   191.575] (**) Option "xkb_model" "pc105"
[   191.575] (**) Option "xkb_layout" "tr"
[   191.575] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event13)
[   191.575] (II) No input driver specified, ignoring this device.
[   191.575] (II) This device may have been added with another device file.
[   191.576] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event14)
[   191.576] (II) No input driver specified, ignoring this device.
[   191.576] (II) This device may have been added with another device file.
[   191.576] (II) config/udev: Adding input device HID 04f3:0103 (/dev/input/event8)
[   191.576] (**) HID 04f3:0103: Applying InputClass "evdev keyboard catchall"
[   191.576] (II) Using input driver 'evdev' for 'HID 04f3:0103'
[   191.576] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   191.576] (**) HID 04f3:0103: always reports core events
[   191.576] (**) evdev: HID 04f3:0103: Device: "/dev/input/event8"
[   191.576] (--) evdev: HID 04f3:0103: Vendor 0x4f3 Product 0x103
[   191.576] (--) evdev: HID 04f3:0103: Found keys
[   191.576] (II) evdev: HID 04f3:0103: Configuring as keyboard
[   191.576] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input8/event8"
[   191.576] (II) XINPUT: Adding extended input device "HID 04f3:0103" (type: KEYBOARD, id 14)
[   191.576] (**) Option "xkb_rules" "evdev"
[   191.576] (**) Option "xkb_model" "pc105"
[   191.576] (**) Option "xkb_layout" "tr"
[   191.577] (II) config/udev: Adding input device HID 04f3:0103 (/dev/input/event9)
[   191.577] (**) HID 04f3:0103: Applying InputClass "evdev keyboard catchall"
[   191.577] (II) Using input driver 'evdev' for 'HID 04f3:0103'
[   191.577] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   191.577] (**) HID 04f3:0103: always reports core events
[   191.577] (**) evdev: HID 04f3:0103: Device: "/dev/input/event9"
[   191.577] (--) evdev: HID 04f3:0103: Vendor 0x4f3 Product 0x103
[   191.577] (--) evdev: HID 04f3:0103: Found 1 mouse buttons
[   191.577] (--) evdev: HID 04f3:0103: Found scroll wheel(s)
[   191.577] (--) evdev: HID 04f3:0103: Found relative axes
[   191.577] (II) evdev: HID 04f3:0103: Forcing relative x/y axes to exist.
[   191.577] (--) evdev: HID 04f3:0103: Found absolute axes
[   191.577] (II) evdev: HID 04f3:0103: Forcing absolute x/y axes to exist.
[   191.577] (--) evdev: HID 04f3:0103: Found keys
[   191.577] (II) evdev: HID 04f3:0103: Configuring as mouse
[   191.577] (II) evdev: HID 04f3:0103: Configuring as keyboard
[   191.577] (II) evdev: HID 04f3:0103: Adding scrollwheel support
[   191.577] (**) evdev: HID 04f3:0103: YAxisMapping: buttons 4 and 5
[   191.577] (**) evdev: HID 04f3:0103: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   191.577] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input9/event9"
[   191.577] (II) XINPUT: Adding extended input device "HID 04f3:0103" (type: KEYBOARD, id 15)
[   191.577] (**) Option "xkb_rules" "evdev"
[   191.577] (**) Option "xkb_model" "pc105"
[   191.577] (**) Option "xkb_layout" "tr"
[   191.577] (II) evdev: HID 04f3:0103: initialized for relative axes.
[   191.577] (WW) evdev: HID 04f3:0103: ignoring absolute axes.
[   191.577] (**) HID 04f3:0103: (accel) keeping acceleration scheme 1
[   191.577] (**) HID 04f3:0103: (accel) acceleration profile 0
[   191.577] (**) HID 04f3:0103: (accel) acceleration factor: 2.000
[   191.577] (**) HID 04f3:0103: (accel) acceleration threshold: 4
[   191.578] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[   191.578] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   191.578] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[   191.578] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   191.578] (**) AT Translated Set 2 keyboard: always reports core events
[   191.578] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[   191.578] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[   191.578] (--) evdev: AT Translated Set 2 keyboard: Found keys
[   191.578] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[   191.578] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[   191.578] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 16)
[   191.578] (**) Option "xkb_rules" "evdev"
[   191.578] (**) Option "xkb_model" "pc105"
[   191.578] (**) Option "xkb_layout" "tr"
[   191.578] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event16)
[   191.578] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[   191.578] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[   191.578] (II) LoadModule: "synaptics"
[   191.579] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[   191.579] (II) Module synaptics: vendor="X.Org Foundation"
[   191.579] compiled for 1.11.3, module version = 1.6.0
[   191.579] Module class: X.Org XInput Driver
[   191.579] ABI class: X.Org XInput driver, version 16.0
[   191.579] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[   191.579] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[   191.579] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   191.579] (**) Option "Device" "/dev/input/event16"
[   191.588] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[   191.588] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5650
[   191.588] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4710
[   191.588] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[   191.588] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[   191.588] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[   191.588] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[   191.588] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   191.588] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   191.596] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input16/event16"
[   191.596] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 17)
[   191.596] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[   191.596] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[   191.596] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.038
[   191.596] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[   191.596] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[   191.596] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[   191.596] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[   191.596] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   191.596] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[   191.596] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[   191.598] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event12)
[   191.598] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[   191.598] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[   191.598] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   191.598] (**) Dell WMI hotkeys: always reports core events
[   191.598] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event12"
[   191.598] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[   191.598] (--) evdev: Dell WMI hotkeys: Found keys
[   191.598] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[   191.598] (**) Option "config_info" "udev:/sys/devices/virtual/input/input12/event12"
[   191.598] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 18)
[   191.598] (**) Option "xkb_rules" "evdev"
[   191.598] (**) Option "xkb_model" "pc105"
[   191.598] (**) Option "xkb_layout" "tr"
[   191.625] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[   192.314] (II) fglrx(0): EDID vendor "AUO", prod id 8940
[   192.314] (II) fglrx(0): Printing DDC gathered Modelines:
[   192.314] (II) fglrx(0): Modeline "1366x768"x0.0   65.10  1366 1382 1390 1398  768 771 775 776 +hsync -vsync (46.6 kHz)
[   195.122] (II) fglrx(0): EDID vendor "AUO", prod id 8940
[   195.122] (II) fglrx(0): Printing DDC gathered Modelines:
[   195.122] (II) fglrx(0): Modeline "1366x768"x0.0   65.10  1366 1382 1390 1398  768 771 775 776 +hsync -vsync (46.6 kHz)
[   304.968] (II) fglrx(0): EDID vendor "AUO", prod id 8940
[   304.968] (II) fglrx(0): Printing DDC gathered Modelines:
[   304.968] (II) fglrx(0): Modeline "1366x768"x0.0   65.10  1366 1382 1390 1398  768 771 775 776 +hsync -vsync (46.6 kHz)
[   305.343] (II) fglrx(0): EDID vendor "AUO", prod id 8940
[   305.343] (II) fglrx(0): Printing DDC gathered Modelines:
[   305.343] (II) fglrx(0): Modeline "1366x768"x0.0   65.10  1366 1382 1390 1398  768 771 775 776 +hsync -vsync (46.6 kHz)
[   305.347] (II) fglrx(0): xdl_xs111_atiddxDisplayScreenEnableDisplays
[   305.978] (II) fglrx(0): EDID vendor "BNQ", prod id 30870
[   305.978] (II) fglrx(0): Using hsync ranges from config file
[   305.978] (II) fglrx(0): Using vrefresh ranges from config file
[   305.978] (II) fglrx(0): Printing DDC gathered Modelines:
[   305.978] (II) fglrx(0): Modeline "1366x768"x0.0   85.50  1366 1436 1579 1792  768 771 774 798 +hsync +vsync (47.7 kHz)
[   305.978] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[   305.978] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[   305.978] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[   305.978] (II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[   305.978] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[   305.978] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[   305.978] (II) fglrx(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[   305.978] (II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[   305.978] (II) fglrx(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz)
[   306.405] (II) fglrx(0): EDID vendor "BNQ", prod id 30870
[   306.406] (II) fglrx(0): Using hsync ranges from config file
[   306.406] (II) fglrx(0): Using vrefresh ranges from config file
[   306.406] (II) fglrx(0): Printing DDC gathered Modelines:
[   306.406] (II) fglrx(0): Modeline "1366x768"x0.0   85.50  1366 1436 1579 1792  768 771 774 798 +hsync +vsync (47.7 kHz)
[   306.406] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[   306.406] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[   306.406] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[   306.406] (II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[   306.406] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[   306.406] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[   306.406] (II) fglrx(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[   306.406] (II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[   306.406] (II) fglrx(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz)
[   320.867] (II) XKB: reuse xkmfile /var/lib/xkb/server-87DDB6A793DBAF5A4545DD8CE8B652AB184C55F8.xkm
[   327.105] (II) fglrx(0): EDID vendor "BNQ", prod id 30870
[   327.105] (II) fglrx(0): Using hsync ranges from config file
[   327.105] (II) fglrx(0): Using vrefresh ranges from config file
[   327.105] (II) fglrx(0): Printing DDC gathered Modelines:
[   327.105] (II) fglrx(0): Modeline "1366x768"x0.0   85.50  1366 1436 1579 1792  768 771 774 798 +hsync +vsync (47.7 kHz)
[   327.105] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[   327.105] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[   327.105] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[   327.105] (II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[   327.105] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[   327.105] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[   327.105] (II) fglrx(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[   327.105] (II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[   327.105] (II) fglrx(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz)
[  2596.032] (II) AIGLX: Suspending AIGLX clients for VT switch
[  2596.033] (II) fglrx(0): Backup framebuffer data.
[  2596.085] (II) fglrx(0): Backup complete.
[  2596.132] (EE) fglrx(0): PPLIB: swlPPLibNotifyEventToPPLib() failed!
[  2596.132] (EE) fglrx(0):        ulEventType = 00000023, ulEventData = 00000001
[  2599.603] (II) AIGLX: Resuming AIGLX clients after VT switch
[  2599.605] (II) fglrx(0): Restore framebuffer data.
[  2599.641] (II) fglrx(0): Restore complete.
[  2599.651] (II) fglrx(0): AC Adapter is used
[  2599.715] (II) fglrx(0): Lid Open Received
[  2599.731] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found



uname -a
Linux emre-pc 3.2.0-25-generic #40-Ubuntu SMP Wed May 23 20:30:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux



dmesg | grep -E "firmware|failed"

[ 3181.089795] ata1.00: failed command: READ FPDMA QUEUED
[ 3181.089813] ata1.00: failed command: READ FPDMA QUEUED
[ 3181.089831] ata1.00: failed command: READ FPDMA QUEUED
[ 3181.089848] ata1.00: failed command: READ FPDMA QUEUED
[ 3181.089866] ata1.00: failed command: READ FPDMA QUEUED
[ 3181.089884] ata1.00: failed command: READ FPDMA QUEUED
[ 3181.089902] ata1.00: failed command: READ FPDMA QUEUED
[ 3181.089919] ata1.00: failed command: READ FPDMA QUEUED
[ 3181.089937] ata1.00: failed command: READ FPDMA QUEUED
[ 3181.089955] ata1.00: failed command: READ FPDMA QUEUED
[ 3181.089972] ata1.00: failed command: READ FPDMA QUEUED
[ 3181.089990] ata1.00: failed command: READ FPDMA QUEUED
[ 3181.090008] ata1.00: failed command: READ FPDMA QUEUED
[ 3181.090025] ata1.00: failed command: READ FPDMA QUEUED
[ 3181.090043] ata1.00: failed command: READ FPDMA QUEUED
[ 3181.090061] ata1.00: failed command: READ FPDMA QUEUED
[ 3181.090079] ata1.00: failed command: READ FPDMA QUEUED
[ 3181.090096] ata1.00: failed command: READ FPDMA QUEUED
[ 3181.090114] ata1.00: failed command: READ FPDMA QUEUED
[ 3181.090132] ata1.00: failed command: READ FPDMA QUEUED
[ 3181.090150] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3181.090167] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3181.090185] ata1.00: failed command: WRITE FPDMA QUEUED
[ 3185.270739] ata1.00: failed command: READ FPDMA QUEUED
[ 3189.418526] ata1.00: failed command: READ FPDMA QUEUED
[ 3193.555287] ata1.00: failed command: READ FPDMA QUEUED
[ 3198.623354] ata1.00: failed command: READ FPDMA QUEUED
[ 3198.624960] sd 0:0:0:0: [sda]  Add. Sense: Unrecovered read error - auto reallocate failed


dmesg | grep -i acpi

[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[  [    1.302229] acpi device:09: hash matches
[  187.112079] acpi device:03: registered as cooling_device4



Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 25 Haziran 2012 - 20:46:42

[20:35] sudo shutdown -h now 3 saniye içerisinde bilgisayar kapandı.(Şaşırdım!)
[20:35] Bilgisayarı açmak için güç düğmesine bastım.
[20:37] Disk sürücüsü /tmp henüz hazır değil yada bağlanılamadı.
[20:38] F tuşuna bastım(düzeltmek için)
[20:40] Yeniden başlatıldı
[20:40] Bilgisayar tamamen açıldı (son yeniden başlatmadan 20 saniye sonra)


Not: Bilgisayarı en son kapatmaya çalıştığımda yine kapanmamış hatta ekranda bir takım yazılar ve hatalar oluşmuş (acelem olduğu için not alamadım ilk defa oldu) vegüç düğmesine basarak kapatmak zorunda kalmıştım.


if

[  188.877025] [fglrx] Reserved FB block: Unshared offset:1fff4000, size:c000
[ 2591.911242] PM: Syncing filesystems ... done.


Gecikmenin nedeni sistemin açılırken askıya alınması, 2591.911242 - 188.877025. Arada çok fark var. PM: resume of drv:sd dev:0:0:0:0 complete after 1149.377 msecs
[ 2594.522492] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 1149.436 msecs
[ 2594.522500] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 1077.718 msecs
[ 2594.552321] PM: resume of devices complete after 1182.187 msecs
[ 2594.552405] PM: resume devices took 1.180 seconds
[ 2594.552440] PM: Finishing wakeup.
gibi bir sürü satır var. Askıya alınıyor sonra yeniden uyandırıyor.

Hangi modülün bu işi yaptığını bulabilirsek onu engelleyip önleyebiliriz. lsmod çıktısına bir bakayım.

Ayrıca ata1.00: failed command: READ FPDMA QUEUED için: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/981465
NCQ ile alakalı da olabilir[1]: ata1.00: failed command: READ FPDMA QUEUED
[  139.663230] ata1.00: cmd 60/08:00:50:3f:83/00:00:0b:00:00/40 tag 0 ncq 4096 in
[  139.663232]          res 41/40:08:51:3f:83/00:00:0b:00:00/6b Emask 0x409 (media error) <F>
Öyleyse NCQ'yu kapatmak için: sudo su
echo 1 > /sys/block/sdX/device/queue_depth
ya da libata.force=1.00:noncq parametresi kullanabiliriz.

Tabi bunlar iyi tarafından yaklaşınca. Aşağıdaki çıktılar diskin sağlıklı olmadığını gösteriyor: end_request: I/O error, dev sda, sector 193150801
[  117.273902] Buffer I/O error on device sda2, logical block 24117994
[  117.273905] Buffer I/O error on device sda2, logical block 24117995
[  117.273909] Buffer I/O error on device sda2, logical block 24117996
[  117.273912] Buffer I/O error on device sda2, logical block 24117997
[  117.273915] Buffer I/O error on device sda2, logical block 24117998
[  117.273919] Buffer I/O error on device sda2, logical block 24117999
[  117.273922] Buffer I/O error on device sda2, logical block 24118000
[  117.273925] Buffer I/O error on device sda2, logical block 24118001
[  117.273931] Buffer I/O error on device sda2, logical block 24118002
[  117.273933] Buffer I/O error on device sda2, logical block 24118003


EXT4-fs (sda2): orphan cleanup on readonly fs
[   66.643457] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 7602243
[   66.643509] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 7602272
[   66.643517] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 6035328
[   66.643544] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 7602290
[   66.643571] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 5771949
[   66.643583] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 5771948
[   66.643610] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 6041272
[   72.411838] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 6041255
[   73.514981] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 6039823
[   73.534844] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 6039135
[   73.537445] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 6039030
[   73.537469] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 6038964


İlk yapmanız gereken tüm verilerinii yedeklemek olsun. Sonra canlı cd ile açıp sudo fsck /dev/sda komutunu yürütmek olsun.

[1] https://answers.launchpad.net/ubuntu/+question/122588

dokuzyuzon

lsmod

Module                  Size  Used by
michael_mic            12612  8
arc4                   12529  4
pci_stub               12622  1
vboxpci                23200  0
vboxnetadp             25670  0
vboxnetflt             23441  0
vboxdrv               287082  3 vboxpci,vboxnetadp,vboxnetflt
parport_pc             32866  0
ppdev                  17113  0
rfcomm                 47604  0
bnep                   18281  2
bluetooth             180104  10 rfcomm,bnep
binfmt_misc            17540  1
dell_wmi               12681  0
sparse_keymap          13890  1 dell_wmi
snd_hda_codec_hdmi     32474  1
joydev                 17693  0
snd_hda_codec_idt      70795  1
dell_laptop            18119  0
dcdbas                 14490  1 dell_laptop
uvcvideo               72627  0
videodev               98259  1 uvcvideo
v4l2_compat_ioctl32    17128  1 videodev
snd_hda_intel          33773  5
snd_hda_codec         127706  3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel
psmouse                87692  0
snd_hwdep              13668  1 snd_hda_codec
serio_raw              13211  0
snd_pcm                97188  3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
lib80211_crypt_tkip    17390  0
snd_seq_midi           13324  0
snd_rawmidi            30748  1 snd_seq_midi
snd_seq_midi_event     14899  1 snd_seq_midi
snd_seq                61896  2 snd_seq_midi,snd_seq_midi_event
wl                   2568210  0
fglrx                3263886  116
snd_timer              29990  2 snd_pcm,snd_seq
snd_seq_device         14540  3 snd_seq_midi,snd_rawmidi,snd_seq
video                  19596  0
snd                    78855  20 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
lib80211               14381  2 lib80211_crypt_tkip,wl
wmi                    19256  1 dell_wmi
mac_hid                13253  0
soundcore              15091  1 snd
snd_page_alloc         18529  2 snd_hda_intel,snd_pcm
lp                     17799  0
mei                    41616  0
parport                46562  3 parport_pc,ppdev,lp
usbhid                 47199  0
hid                    99559  1 usbhid
r8169                  62099  0


Diskin sağlık olmadığı derken? :)  korktum gerçekten biran. Bu söylediğiniz komut diski biçimlendirecek falan mı? yani harici bir disk mi kullanayım yedekleme yapmak için?

yönlendirdiğiniz sayfalardan pek birşey anlayamadım. çok karışık duruyorlar

echo 1 > /sys/block/sdX/device/queue_depth

Ayrıca  bu komutu da çalıştıramadım böyle bir dizin yok diyor. :(

if

@dokuzyuzon, çıktıdaki hatalarla arama yapığımda genelde diskin bozulmaya yakın ya da bozuk olduğu söylendiği için dedim ki zaten haalar da buna işaret ediyor.

sudo fsck /dev/sda diski biçimlendirmez ama dosya sistemindeki hataları onarır bir yere kadar. O yüzden dediğim gibi önleminizi alın, faklı bir diske taşıyın verilerinizi.

echo 1 > /sys/block/sda/device/queue_depth olacak komut.

Askıya alan bir sürücü görmedim.

cat /var/log/pm-suspend.log
cat /proc/acpi/wakeup
ne diyor?


dokuzyuzon

echo 1 > /sys/block/sda/device/queue_depth
hiç birşey yazmadı.


cat /var/log/pm-suspend.log

Initial commandline parameters:
Wed Jun 20 20:40:58 EEST 2012: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/000kernel-change suspend suspend:

/usr/lib/pm-utils/sleep.d/000kernel-change suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
Linux emre-pc 3.2.0-25-generic #40-Ubuntu SMP Wed May 23 20:30:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux
Module                  Size  Used by
snd_seq_dummy          12798  0
michael_mic            12612  0
arc4                   12529  0
bnep                   18281  2
rfcomm                 47604  0
bluetooth             180104  10 bnep,rfcomm
parport_pc             32866  0
ppdev                  17113  0
vesafb                 13844  1
snd_hda_codec_hdmi     32474  1
snd_hda_codec_idt      70795  1
snd_hda_intel          33773  5
snd_hda_codec         127706  3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel
snd_hwdep              13668  1 snd_hda_codec
snd_pcm                97188  3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
snd_seq_midi           13324  0
snd_rawmidi            30748  1 snd_seq_midi
snd_seq_midi_event     14899  1 snd_seq_midi
snd_seq                61896  3 snd_seq_dummy,snd_seq_midi,snd_seq_midi_event
uvcvideo               72627  0
videodev               98259  1 uvcvideo
v4l2_compat_ioctl32    17128  1 videodev
dell_wmi               12681  0
lib80211_crypt_tkip    17390  0
snd_timer              29990  2 snd_pcm,snd_seq
snd_seq_device         14540  4 snd_seq_dummy,snd_seq_midi,snd_rawmidi,snd_seq
snd                    78855  20 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
mei                    41616  0
sparse_keymap          13890  1 dell_wmi
joydev                 17693  0
lp                     17799  0
psmouse                87692  0
serio_raw              13211  0
parport                46562  3 parport_pc,ppdev,lp
soundcore              15091  1 snd
wl                   2568210  0
wmi                    19256  1 dell_wmi
dell_laptop            18119  0
snd_page_alloc         18529  2 snd_hda_intel,snd_pcm
lib80211               14381  2 lib80211_crypt_tkip,wl
mac_hid                13253  0
video                  19596  0
fglrx                3263886  185
dcdbas                 14490  1 dell_laptop
usbhid                 47199  0
hid                    99559  1 usbhid
r8169                  62099  0
             total       used       free     shared    buffers     cached
Mem:       3008756    2704852     303904          0     125860    1178180
-/+ buffers/cache:    1400812    1607944
Swap:       102396      10416      91980

/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:

/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01PulseAudio suspend suspend:
Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>>
/usr/lib/pm-utils/sleep.d/01PulseAudio suspend suspend: success.
Running hook /etc/pm/sleep.d/10_grub-common suspend suspend:

/etc/pm/sleep.d/10_grub-common suspend suspend: success.
Running hook /etc/pm/sleep.d/10_unattended-upgrades-hibernate suspend suspend:

/etc/pm/sleep.d/10_unattended-upgrades-hibernate suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend:
Having NetworkManager put all interaces to sleep...Failed.

/usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/60_wpa_supplicant suspend suspend:
Failed to connect to wpa_supplicant - wpa_ctrl_open: No such file or directory

/usr/lib/pm-utils/sleep.d/60_wpa_supplicant suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:

/usr/lib/pm-utils/sleep.d/75modules suspend suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:

/usr/lib/pm-utils/sleep.d/90clock suspend suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:

/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95anacron suspend suspend:
stop: Unknown instance:

/usr/lib/pm-utils/sleep.d/95anacron suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95hdparm-apm suspend suspend:

/usr/lib/pm-utils/sleep.d/95hdparm-apm suspend suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:

/usr/lib/pm-utils/sleep.d/95led suspend suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
ATI Catalyst driver detected, not using quirks.

/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0

/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
Running hook /etc/pm/sleep.d/novatel_3g_suspend suspend suspend:

/etc/pm/sleep.d/novatel_3g_suspend suspend suspend: success.
Wed Jun 20 20:41:02 EEST 2012: performing suspend
Wed Jun 20 20:51:56 EEST 2012: Awake.
Wed Jun 20 20:51:56 EEST 2012: Running hooks for resume
Running hook /etc/pm/sleep.d/novatel_3g_suspend resume suspend:

/etc/pm/sleep.d/novatel_3g_suspend resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video resume suspend:

/usr/lib/pm-utils/sleep.d/99video resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend:

/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led resume suspend:

/usr/lib/pm-utils/sleep.d/95led resume suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/95hdparm-apm resume suspend:

/dev/sda:
setting Advanced Power Management level to 0xfe (254)
APM_level = 254

/dev/sda:
setting Advanced Power Management level to 0xfe (254)
APM_level = 254

/usr/lib/pm-utils/sleep.d/95hdparm-apm resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95anacron resume suspend:

/usr/lib/pm-utils/sleep.d/95anacron resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend:

/usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock resume suspend:

/usr/lib/pm-utils/sleep.d/90clock resume suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/75modules resume suspend:
Reloaded unloaded modules.

/usr/lib/pm-utils/sleep.d/75modules resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/60_wpa_supplicant resume suspend:
Failed to connect to wpa_supplicant - wpa_ctrl_open: No such file or directory

/usr/lib/pm-utils/sleep.d/60_wpa_supplicant resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend:
Having NetworkManager wake interfaces back up...Failed.

/usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend: success.
Running hook /etc/pm/sleep.d/10_unattended-upgrades-hibernate resume suspend:

/etc/pm/sleep.d/10_unattended-upgrades-hibernate resume suspend: success.
Running hook /etc/pm/sleep.d/10_grub-common resume suspend:

/etc/pm/sleep.d/10_grub-common resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01PulseAudio resume suspend:
Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>>
/usr/lib/pm-utils/sleep.d/01PulseAudio resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave resume suspend:

/usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00logging resume suspend:

/usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/000kernel-change resume suspend:

/usr/lib/pm-utils/sleep.d/000kernel-change resume suspend: success.
Wed Jun 20 20:51:57 EEST 2012: Finished.
Initial commandline parameters:
Thu Jun 21 11:08:59 EEST 2012: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/000kernel-change suspend suspend:

/usr/lib/pm-utils/sleep.d/000kernel-change suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
Linux emre-pc 3.2.0-25-generic #40-Ubuntu SMP Wed May 23 20:30:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux
Module                  Size  Used by
btrfs                 652957  0
zlib_deflate           27139  1 btrfs
libcrc32c              12644  1 btrfs
ufs                    75303  0
qnx4                   17677  0
hfsplus                84867  0
hfs                    54782  0
minix                  36288  0
ntfs                  101885  0
vfat                   17585  0
msdos                  17332  0
fat                    61512  2 vfat,msdos
jfs                   186647  0
xfs                   836544  0
reiserfs              244805  0
ext2                   73795  0
michael_mic            12612  0
arc4                   12529  0
vesafb                 13844  1
pci_stub               12622  1
vboxpci                23200  0
vboxnetadp             25670  0
vboxnetflt             23441  0
vboxdrv               287082  3 vboxpci,vboxnetadp,vboxnetflt
rfcomm                 47604  0
parport_pc             32866  0
ppdev                  17113  0
bnep                   18281  2
bluetooth             180104  10 rfcomm,bnep
binfmt_misc            17540  1
dell_wmi               12681  0
sparse_keymap          13890  1 dell_wmi
snd_hda_codec_hdmi     32474  1
dell_laptop            18119  0
dcdbas                 14490  1 dell_laptop
joydev                 17693  0
fglrx                3263886  111
snd_hda_codec_idt      70795  1
snd_seq_midi           13324  0
lib80211_crypt_tkip    17390  0
uvcvideo               72627  0
videodev               98259  1 uvcvideo
v4l2_compat_ioctl32    17128  1 videodev
snd_rawmidi            30748  1 snd_seq_midi
snd_seq_midi_event     14899  1 snd_seq_midi
wl                   2568210  0
snd_hda_intel          33773  5
psmouse                87692  0
snd_hda_codec         127706  3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel
serio_raw              13211  0
snd_hwdep              13668  1 snd_hda_codec
snd_seq                61896  2 snd_seq_midi,snd_seq_midi_event
snd_pcm                97188  3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
lib80211               14381  2 lib80211_crypt_tkip,wl
snd_seq_device         14540  3 snd_seq_midi,snd_rawmidi,snd_seq
snd_timer              29990  2 snd_seq,snd_pcm
snd                    78855  20 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_rawmidi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_seq,snd_pcm,snd_seq_device,snd_timer
video                  19596  0
mei                    41616  0
wmi                    19256  1 dell_wmi
soundcore              15091  1 snd
snd_page_alloc         18529  2 snd_hda_intel,snd_pcm
mac_hid                13253  0
lp                     17799  0
parport                46562  3 parport_pc,ppdev,lp
usbhid                 47199  0
hid                    99559  1 usbhid
r8169                  62099  0
             total       used       free     shared    buffers     cached
Mem:       3008756    1659100    1349656          0      95396     883552
-/+ buffers/cache:     680152    2328604
Swap:       102396          0     102396

/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:

/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01PulseAudio suspend suspend:
Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>>
/usr/lib/pm-utils/sleep.d/01PulseAudio suspend suspend: success.
Running hook /etc/pm/sleep.d/10_grub-common suspend suspend:

/etc/pm/sleep.d/10_grub-common suspend suspend: success.
Running hook /etc/pm/sleep.d/10_unattended-upgrades-hibernate suspend suspend:

/etc/pm/sleep.d/10_unattended-upgrades-hibernate suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend:
Having NetworkManager put all interaces to sleep...Failed.

/usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/60_wpa_supplicant suspend suspend:
Failed to connect to wpa_supplicant - wpa_ctrl_open: No such file or directory

/usr/lib/pm-utils/sleep.d/60_wpa_supplicant suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:

/usr/lib/pm-utils/sleep.d/75modules suspend suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:

/usr/lib/pm-utils/sleep.d/90clock suspend suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:

/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95anacron suspend suspend:
stop: Unknown instance:

/usr/lib/pm-utils/sleep.d/95anacron suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95hdparm-apm suspend suspend:

/usr/lib/pm-utils/sleep.d/95hdparm-apm suspend suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:

/usr/lib/pm-utils/sleep.d/95led suspend suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
ATI Catalyst driver detected, not using quirks.

/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0

/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
Running hook /etc/pm/sleep.d/novatel_3g_suspend suspend suspend:

/etc/pm/sleep.d/novatel_3g_suspend suspend suspend: success.
Thu Jun 21 11:09:02 EEST 2012: performing suspend
Thu Jun 21 11:41:58 EEST 2012: Awake.
Thu Jun 21 11:41:58 EEST 2012: Running hooks for resume
Running hook /etc/pm/sleep.d/novatel_3g_suspend resume suspend:

/etc/pm/sleep.d/novatel_3g_suspend resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video resume suspend:

/usr/lib/pm-utils/sleep.d/99video resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend:

/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led resume suspend:

/usr/lib/pm-utils/sleep.d/95led resume suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/95hdparm-apm resume suspend:

/dev/sda:
setting Advanced Power Management level to 0xfe (254)
APM_level = 254

/dev/sda:
setting Advanced Power Management level to 0xfe (254)
APM_level = 254

/usr/lib/pm-utils/sleep.d/95hdparm-apm resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95anacron resume suspend:

/usr/lib/pm-utils/sleep.d/95anacron resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend:

/usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock resume suspend:

/usr/lib/pm-utils/sleep.d/90clock resume suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/75modules resume suspend:
Reloaded unloaded modules.

/usr/lib/pm-utils/sleep.d/75modules resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/60_wpa_supplicant resume suspend:
Failed to connect to wpa_supplicant - wpa_ctrl_open: No such file or directory

/usr/lib/pm-utils/sleep.d/60_wpa_supplicant resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend:
Having NetworkManager wake interfaces back up...Failed.

/usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend: success.
Running hook /etc/pm/sleep.d/10_unattended-upgrades-hibernate resume suspend:

/etc/pm/sleep.d/10_unattended-upgrades-hibernate resume suspend: success.
Running hook /etc/pm/sleep.d/10_grub-common resume suspend:

/etc/pm/sleep.d/10_grub-common resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01PulseAudio resume suspend:
Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>>
/usr/lib/pm-utils/sleep.d/01PulseAudio resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave resume suspend:

/usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00logging resume suspend:

/usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/000kernel-change resume suspend:

/usr/lib/pm-utils/sleep.d/000kernel-change resume suspend: success.
Thu Jun 21 11:41:59 EEST 2012: Finished.
Initial commandline parameters:
Thu Jun 21 12:18:32 EEST 2012: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/000kernel-change suspend suspend:

/usr/lib/pm-utils/sleep.d/000kernel-change suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
Linux emre-pc 3.2.0-25-generic #40-Ubuntu SMP Wed May 23 20:30:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux
Module                  Size  Used by
btrfs                 652957  0
zlib_deflate           27139  1 btrfs
libcrc32c              12644  1 btrfs
ufs                    75303  0
qnx4                   17677  0
hfsplus                84867  0
hfs                    54782  0
minix                  36288  0
ntfs                  101885  0
vfat                   17585  0
msdos                  17332  0
fat                    61512  2 vfat,msdos
jfs                   186647  0
xfs                   836544  0
reiserfs              244805  0
ext2                   73795  0
michael_mic            12612  0
arc4                   12529  0
vesafb                 13844  1
pci_stub               12622  1
vboxpci                23200  0
vboxnetadp             25670  0
vboxnetflt             23441  0
vboxdrv               287082  3 vboxpci,vboxnetadp,vboxnetflt
rfcomm                 47604  0
parport_pc             32866  0
ppdev                  17113  0
bnep                   18281  2
bluetooth             180104  10 rfcomm,bnep
binfmt_misc            17540  1
dell_wmi               12681  0
sparse_keymap          13890  1 dell_wmi
snd_hda_codec_hdmi     32474  1
dell_laptop            18119  0
dcdbas                 14490  1 dell_laptop
joydev                 17693  0
fglrx                3263886  100
snd_hda_codec_idt      70795  1
snd_seq_midi           13324  0
lib80211_crypt_tkip    17390  0
uvcvideo               72627  0
videodev               98259  1 uvcvideo
v4l2_compat_ioctl32    17128  1 videodev
snd_rawmidi            30748  1 snd_seq_midi
snd_seq_midi_event     14899  1 snd_seq_midi
wl                   2568210  0
snd_hda_intel          33773  5
psmouse                87692  0
snd_hda_codec         127706  3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel
serio_raw              13211  0
snd_hwdep              13668  1 snd_hda_codec
snd_seq                61896  2 snd_seq_midi,snd_seq_midi_event
snd_pcm                97188  3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
lib80211               14381  2 lib80211_crypt_tkip,wl
snd_seq_device         14540  3 snd_seq_midi,snd_rawmidi,snd_seq
snd_timer              29990  2 snd_seq,snd_pcm
snd                    78855  20 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_rawmidi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_seq,snd_pcm,snd_seq_device,snd_timer
video                  19596  0
mei                    41616  0
wmi                    19256  1 dell_wmi
soundcore              15091  1 snd
snd_page_alloc         18529  2 snd_hda_intel,snd_pcm
mac_hid                13253  0
lp                     17799  0
parport                46562  3 parport_pc,ppdev,lp
usbhid                 47199  0
hid                    99559  1 usbhid
r8169                  62099  0
             total       used       free     shared    buffers     cached
Mem:       3008756    2310224     698532          0     117552    1450788
-/+ buffers/cache:     741884    2266872
Swap:       102396          0     102396

/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:

/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01PulseAudio suspend suspend:
Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>>
/usr/lib/pm-utils/sleep.d/01PulseAudio suspend suspend: success.
Running hook /etc/pm/sleep.d/10_grub-common suspend suspend:

/etc/pm/sleep.d/10_grub-common suspend suspend: success.
Running hook /etc/pm/sleep.d/10_unattended-upgrades-hibernate suspend suspend:

/etc/pm/sleep.d/10_unattended-upgrades-hibernate suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend:
Having NetworkManager put all interaces to sleep...Failed.

/usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/60_wpa_supplicant suspend suspend:
Failed to connect to wpa_supplicant - wpa_ctrl_open: No such file or directory

/usr/lib/pm-utils/sleep.d/60_wpa_supplicant suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:

/usr/lib/pm-utils/sleep.d/75modules suspend suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:

/usr/lib/pm-utils/sleep.d/90clock suspend suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:

/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95anacron suspend suspend:
stop: Unknown instance:

/usr/lib/pm-utils/sleep.d/95anacron suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95hdparm-apm suspend suspend:

/usr/lib/pm-utils/sleep.d/95hdparm-apm suspend suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:

/usr/lib/pm-utils/sleep.d/95led suspend suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
ATI Catalyst driver detected, not using quirks.

/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0

/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
Running hook /etc/pm/sleep.d/novatel_3g_suspend suspend suspend:

/etc/pm/sleep.d/novatel_3g_suspend suspend suspend: success.
Thu Jun 21 12:18:34 EEST 2012: performing suspend
Initial commandline parameters:
Thu Jun 21 20:12:44 EEST 2012: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/000kernel-change suspend suspend:

/usr/lib/pm-utils/sleep.d/000kernel-change suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
Linux emre-pc 3.2.0-25-generic #40-Ubuntu SMP Wed May 23 20:30:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux
Module                  Size  Used by
michael_mic            12612  0
arc4                   12529  0
pci_stub               12622  1
vboxpci                23200  0
vboxnetadp             25670  0
vboxnetflt             23441  0
vboxdrv               287082  3 vboxpci,vboxnetadp,vboxnetflt
parport_pc             32866  0
ppdev                  17113  0
vesafb                 13844  1
bnep                   18281  2
rfcomm                 47604  0
bluetooth             180104  10 bnep,rfcomm
binfmt_misc            17540  1
dell_wmi               12681  0
sparse_keymap          13890  1 dell_wmi
dell_laptop            18119  0
snd_hda_codec_hdmi     32474  1
dcdbas                 14490  1 dell_laptop
uvcvideo               72627  0
joydev                 17693  0
videodev               98259  1 uvcvideo
snd_hda_codec_idt      70795  1
v4l2_compat_ioctl32    17128  1 videodev
psmouse                87692  0
serio_raw              13211  0
snd_seq_midi           13324  0
snd_rawmidi            30748  1 snd_seq_midi
snd_seq_midi_event     14899  1 snd_seq_midi
snd_seq                61896  2 snd_seq_midi,snd_seq_midi_event
lib80211_crypt_tkip    17390  0
snd_hda_intel          33773  5
snd_hda_codec         127706  3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel
snd_hwdep              13668  1 snd_hda_codec
snd_seq_device         14540  3 snd_seq_midi,snd_rawmidi,snd_seq
snd_pcm                97188  3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
fglrx                3263886  113
wl                   2568210  0
snd_timer              29990  2 snd_seq,snd_pcm
wmi                    19256  1 dell_wmi
video                  19596  0
snd                    78855  20 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_rawmidi,snd_seq,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_seq_device,snd_pcm,snd_timer
mac_hid                13253  0
mei                    41616  0
lib80211               14381  2 lib80211_crypt_tkip,wl
soundcore              15091  1 snd
snd_page_alloc         18529  2 snd_hda_intel,snd_pcm
lp                     17799  0
parport                46562  3 parport_pc,ppdev,lp
usbhid                 47199  0
hid                    99559  1 usbhid
r8169                  62099  0
             total       used       free     shared    buffers     cached
Mem:       3008756    2039964     968792          0     214984    1100716
-/+ buffers/cache:     724264    2284492
Swap:       102396          0     102396

/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:

/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01PulseAudio suspend suspend:
Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>>
/usr/lib/pm-utils/sleep.d/01PulseAudio suspend suspend: success.
Running hook /etc/pm/sleep.d/10_grub-common suspend suspend:

/etc/pm/sleep.d/10_grub-common suspend suspend: success.
Running hook /etc/pm/sleep.d/10_unattended-upgrades-hibernate suspend suspend:

/etc/pm/sleep.d/10_unattended-upgrades-hibernate suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend:
Having NetworkManager put all interaces to sleep...Failed.

/usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/60_wpa_supplicant suspend suspend:
Failed to connect to wpa_supplicant - wpa_ctrl_open: No such file or directory

/usr/lib/pm-utils/sleep.d/60_wpa_supplicant suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:

/usr/lib/pm-utils/sleep.d/75modules suspend suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:

/usr/lib/pm-utils/sleep.d/90clock suspend suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:

/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95anacron suspend suspend:
stop: Unknown instance:

/usr/lib/pm-utils/sleep.d/95anacron suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95hdparm-apm suspend suspend:

/usr/lib/pm-utils/sleep.d/95hdparm-apm suspend suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:

/usr/lib/pm-utils/sleep.d/95led suspend suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
ATI Catalyst driver detected, not using quirks.

/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0

/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
Running hook /etc/pm/sleep.d/novatel_3g_suspend suspend suspend:

/etc/pm/sleep.d/novatel_3g_suspend suspend suspend: success.
Thu Jun 21 20:12:46 EEST 2012: performing suspend
Thu Jun 21 21:33:05 EEST 2012: Awake.
Thu Jun 21 21:33:05 EEST 2012: Running hooks for resume
Running hook /etc/pm/sleep.d/novatel_3g_suspend resume suspend:

/etc/pm/sleep.d/novatel_3g_suspend resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video resume suspend:

/usr/lib/pm-utils/sleep.d/99video resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend:

/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led resume suspend:

/usr/lib/pm-utils/sleep.d/95led resume suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/95hdparm-apm resume suspend:

/dev/sda:
setting Advanced Power Management level to 0xfe (254)
APM_level = 254

/dev/sda:
setting Advanced Power Management level to 0xfe (254)
APM_level = 254

/usr/lib/pm-utils/sleep.d/95hdparm-apm resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95anacron resume suspend:

/usr/lib/pm-utils/sleep.d/95anacron resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend:

/usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock resume suspend:

/usr/lib/pm-utils/sleep.d/90clock resume suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/75modules resume suspend:
Reloaded unloaded modules.

/usr/lib/pm-utils/sleep.d/75modules resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/60_wpa_supplicant resume suspend:
Failed to connect to wpa_supplicant - wpa_ctrl_open: No such file or directory

/usr/lib/pm-utils/sleep.d/60_wpa_supplicant resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend:
Having NetworkManager wake interfaces back up...Failed.

/usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend: success.
Running hook /etc/pm/sleep.d/10_unattended-upgrades-hibernate resume suspend:

/etc/pm/sleep.d/10_unattended-upgrades-hibernate resume suspend: success.
Running hook /etc/pm/sleep.d/10_grub-common resume suspend:

/etc/pm/sleep.d/10_grub-common resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01PulseAudio resume suspend:
Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>>
/usr/lib/pm-utils/sleep.d/01PulseAudio resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave resume suspend:

/usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00logging resume suspend:

/usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/000kernel-change resume suspend:

/usr/lib/pm-utils/sleep.d/000kernel-change resume suspend: success.
Thu Jun 21 21:33:06 EEST 2012: Finished.
Initial commandline parameters:
Fri Jun 22 17:54:48 EEST 2012: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/000kernel-change suspend suspend:

/usr/lib/pm-utils/sleep.d/000kernel-change suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
Linux emre-pc 3.2.0-25-generic #40-Ubuntu SMP Wed May 23 20:30:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux
Module                  Size  Used by
michael_mic            12612  0
arc4                   12529  0
vesafb                 13844  1
pci_stub               12622  1
vboxpci                23200  0
vboxnetadp             25670  0
vboxnetflt             23441  0
vboxdrv               287082  3 vboxpci,vboxnetadp,vboxnetflt
parport_pc             32866  0
rfcomm                 47604  0
ppdev                  17113  0
bnep                   18281  2
bluetooth             180104  10 rfcomm,bnep
binfmt_misc            17540  1
dell_wmi               12681  0
sparse_keymap          13890  1 dell_wmi
dell_laptop            18119  0
dcdbas                 14490  1 dell_laptop
uvcvideo               72627  0
videodev               98259  1 uvcvideo
v4l2_compat_ioctl32    17128  1 videodev
snd_hda_codec_hdmi     32474  1
lib80211_crypt_tkip    17390  0
joydev                 17693  0
snd_hda_codec_idt      70795  1
wl                   2568210  0
psmouse                87692  0
serio_raw              13211  0
snd_hda_intel          33773  5
snd_hda_codec         127706  3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel
snd_hwdep              13668  1 snd_hda_codec
lib80211               14381  2 lib80211_crypt_tkip,wl
snd_pcm                97188  3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
snd_seq_midi           13324  0
snd_rawmidi            30748  1 snd_seq_midi
snd_seq_midi_event     14899  1 snd_seq_midi
fglrx                3263886  240
snd_seq                61896  2 snd_seq_midi,snd_seq_midi_event
snd_timer              29990  2 snd_pcm,snd_seq
snd_seq_device         14540  3 snd_seq_midi,snd_rawmidi,snd_seq
wmi                    19256  1 dell_wmi
snd                    78855  20 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
video                  19596  0
mac_hid                13253  0
soundcore              15091  1 snd
snd_page_alloc         18529  2 snd_hda_intel,snd_pcm
mei                    41616  0
lp                     17799  0
parport                46562  3 parport_pc,ppdev,lp
usbhid                 47199  0
hid                    99559  1 usbhid
r8169                  62099  0
             total       used       free     shared    buffers     cached
Mem:       3008756    1263576    1745180          0      55700     476668
-/+ buffers/cache:     731208    2277548
Swap:       102396          0     102396

/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:

/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01PulseAudio suspend suspend:
Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>>
/usr/lib/pm-utils/sleep.d/01PulseAudio suspend suspend: success.
Running hook /etc/pm/sleep.d/10_grub-common suspend suspend:

/etc/pm/sleep.d/10_grub-common suspend suspend: success.
Running hook /etc/pm/sleep.d/10_unattended-upgrades-hibernate suspend suspend:

/etc/pm/sleep.d/10_unattended-upgrades-hibernate suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend:
Having NetworkManager put all interaces to sleep...Failed.

/usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/60_wpa_supplicant suspend suspend:
Failed to connect to wpa_supplicant - wpa_ctrl_open: No such file or directory

/usr/lib/pm-utils/sleep.d/60_wpa_supplicant suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:

/usr/lib/pm-utils/sleep.d/75modules suspend suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:

/usr/lib/pm-utils/sleep.d/90clock suspend suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:

/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95anacron suspend suspend:
stop: Unknown instance:

/usr/lib/pm-utils/sleep.d/95anacron suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95hdparm-apm suspend suspend:

/usr/lib/pm-utils/sleep.d/95hdparm-apm suspend suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:

/usr/lib/pm-utils/sleep.d/95led suspend suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
ATI Catalyst driver detected, not using quirks.

/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0

/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
Running hook /etc/pm/sleep.d/novatel_3g_suspend suspend suspend:

/etc/pm/sleep.d/novatel_3g_suspend suspend suspend: success.
Fri Jun 22 17:54:51 EEST 2012: performing suspend
Fri Jun 22 20:31:06 EEST 2012: Awake.
Fri Jun 22 20:31:06 EEST 2012: Running hooks for resume
Running hook /etc/pm/sleep.d/novatel_3g_suspend resume suspend:

/etc/pm/sleep.d/novatel_3g_suspend resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video resume suspend:

/usr/lib/pm-utils/sleep.d/99video resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend:

/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led resume suspend:

/usr/lib/pm-utils/sleep.d/95led resume suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/95hdparm-apm resume suspend:

/dev/sda:
setting Advanced Power Management level to 0xfe (254)
APM_level = 254

/dev/sda:
setting Advanced Power Management level to 0xfe (254)
APM_level = 254

/usr/lib/pm-utils/sleep.d/95hdparm-apm resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95anacron resume suspend:

/usr/lib/pm-utils/sleep.d/95anacron resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend:

/usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock resume suspend:

/usr/lib/pm-utils/sleep.d/90clock resume suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/75modules resume suspend:
Reloaded unloaded modules.

/usr/lib/pm-utils/sleep.d/75modules resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/60_wpa_supplicant resume suspend:
Failed to connect to wpa_supplicant - wpa_ctrl_open: No such file or directory

/usr/lib/pm-utils/sleep.d/60_wpa_supplicant resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend:
Having NetworkManager wake interfaces back up...Failed.

/usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend: success.
Running hook /etc/pm/sleep.d/10_unattended-upgrades-hibernate resume suspend:

/etc/pm/sleep.d/10_unattended-upgrades-hibernate resume suspend: success.
Running hook /etc/pm/sleep.d/10_grub-common resume suspend:

/etc/pm/sleep.d/10_grub-common resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01PulseAudio resume suspend:
Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>>
/usr/lib/pm-utils/sleep.d/01PulseAudio resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave resume suspend:

/usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00logging resume suspend:

/usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/000kernel-change resume suspend:

/usr/lib/pm-utils/sleep.d/000kernel-change resume suspend: success.
Fri Jun 22 20:31:07 EEST 2012: Finished.
Initial commandline parameters:
Fri Jun 22 21:11:14 EEST 2012: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/000kernel-change suspend suspend:

/usr/lib/pm-utils/sleep.d/000kernel-change suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
Linux emre-pc 3.2.0-25-generic #40-Ubuntu SMP Wed May 23 20:30:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux
Module                  Size  Used by
michael_mic            12612  0
arc4                   12529  0
vesafb                 13844  1
pci_stub               12622  1
vboxpci                23200  0
vboxnetadp             25670  0
vboxnetflt             23441  0
vboxdrv               287082  3 vboxpci,vboxnetadp,vboxnetflt
parport_pc             32866  0
rfcomm                 47604  0
ppdev                  17113  0
bnep                   18281  2
bluetooth             180104  10 rfcomm,bnep
binfmt_misc            17540  1
dell_wmi               12681  0
sparse_keymap          13890  1 dell_wmi
dell_laptop            18119  0
dcdbas                 14490  1 dell_laptop
uvcvideo               72627  0
videodev               98259  1 uvcvideo
v4l2_compat_ioctl32    17128  1 videodev
snd_hda_codec_hdmi     32474  1
lib80211_crypt_tkip    17390  0
joydev                 17693  0
snd_hda_codec_idt      70795  1
wl                   2568210  0
psmouse                87692  0
serio_raw              13211  0
snd_hda_intel          33773  5
snd_hda_codec         127706  3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel
snd_hwdep              13668  1 snd_hda_codec
lib80211               14381  2 lib80211_crypt_tkip,wl
snd_pcm                97188  3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
snd_seq_midi           13324  0
snd_rawmidi            30748  1 snd_seq_midi
snd_seq_midi_event     14899  1 snd_seq_midi
fglrx                3263886  96
snd_seq                61896  2 snd_seq_midi,snd_seq_midi_event
snd_timer              29990  2 snd_pcm,snd_seq
snd_seq_device         14540  3 snd_seq_midi,snd_rawmidi,snd_seq
wmi                    19256  1 dell_wmi
snd                    78855  20 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
video                  19596  0
mac_hid                13253  0
soundcore              15091  1 snd
snd_page_alloc         18529  2 snd_hda_intel,snd_pcm
mei                    41616  0
lp                     17799  0
parport                46562  3 parport_pc,ppdev,lp
usbhid                 47199  0
hid                    99559  1 usbhid
r8169                  62099  0
             total       used       free     shared    buffers     cached
Mem:       3008756    1070068    1938688          0      57348     483852
-/+ buffers/cache:     528868    2479888
Swap:       102396          0     102396

/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:

/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01PulseAudio suspend suspend:
Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>>
/usr/lib/pm-utils/sleep.d/01PulseAudio suspend suspend: success.
Running hook /etc/pm/sleep.d/10_grub-common suspend suspend:

/etc/pm/sleep.d/10_grub-common suspend suspend: success.
Running hook /etc/pm/sleep.d/10_unattended-upgrades-hibernate suspend suspend:

/etc/pm/sleep.d/10_unattended-upgrades-hibernate suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend:
Having NetworkManager put all interaces to sleep...Failed.

/usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/60_wpa_supplicant suspend suspend:
Failed to connect to wpa_supplicant - wpa_ctrl_open: No such file or directory

/usr/lib/pm-utils/sleep.d/60_wpa_supplicant suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:

/usr/lib/pm-utils/sleep.d/75modules suspend suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:

/usr/lib/pm-utils/sleep.d/90clock suspend suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:

/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95anacron suspend suspend:
stop: Unknown instance:

/usr/lib/pm-utils/sleep.d/95anacron suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95hdparm-apm suspend suspend:

/usr/lib/pm-utils/sleep.d/95hdparm-apm suspend suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:

/usr/lib/pm-utils/sleep.d/95led suspend suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
ATI Catalyst driver detected, not using quirks.

/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0

/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
Running hook /etc/pm/sleep.d/novatel_3g_suspend suspend suspend:

/etc/pm/sleep.d/novatel_3g_suspend suspend suspend: success.
Fri Jun 22 21:11:15 EEST 2012: performing suspend
Fri Jun 22 22:45:53 EEST 2012: Awake.
Fri Jun 22 22:45:53 EEST 2012: Running hooks for resume
Running hook /etc/pm/sleep.d/novatel_3g_suspend resume suspend:

/etc/pm/sleep.d/novatel_3g_suspend resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video resume suspend:

/usr/lib/pm-utils/sleep.d/99video resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend:

/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led resume suspend:

/usr/lib/pm-utils/sleep.d/95led resume suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/95hdparm-apm resume suspend:

/dev/sda:
setting Advanced Power Management level to 0xfe (254)
APM_level = 254

/dev/sda:
setting Advanced Power Management level to 0xfe (254)
APM_level = 254

/usr/lib/pm-utils/sleep.d/95hdparm-apm resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95anacron resume suspend:

/usr/lib/pm-utils/sleep.d/95anacron resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend:

/usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock resume suspend:

/usr/lib/pm-utils/sleep.d/90clock resume suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/75modules resume suspend:
Reloaded unloaded modules.

/usr/lib/pm-utils/sleep.d/75modules resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/60_wpa_supplicant resume suspend:
Failed to connect to wpa_supplicant - wpa_ctrl_open: No such file or directory

/usr/lib/pm-utils/sleep.d/60_wpa_supplicant resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend:
Having NetworkManager wake interfaces back up...Failed.

/usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend: success.
Running hook /etc/pm/sleep.d/10_unattended-upgrades-hibernate resume suspend:

/etc/pm/sleep.d/10_unattended-upgrades-hibernate resume suspend: success.
Running hook /etc/pm/sleep.d/10_grub-common resume suspend:

/etc/pm/sleep.d/10_grub-common resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01PulseAudio resume suspend:
Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>>
/usr/lib/pm-utils/sleep.d/01PulseAudio resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave resume suspend:

/usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00logging resume suspend:

/usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/000kernel-change resume suspend:

/usr/lib/pm-utils/sleep.d/000kernel-change resume suspend: success.
Fri Jun 22 22:45:53 EEST 2012: Finished.
Initial commandline parameters:
Sun Jun 24 17:52:52 EEST 2012: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/000kernel-change suspend suspend:

/usr/lib/pm-utils/sleep.d/000kernel-change suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
Linux emre-pc 3.2.0-25-generic #40-Ubuntu SMP Wed May 23 20:30:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux
Module                  Size  Used by
michael_mic            12612  0
arc4                   12529  0
pci_stub               12622  1
vboxpci                23200  0
vboxnetadp             25670  0
vboxnetflt             23441  0
vboxdrv               287082  3 vboxpci,vboxnetadp,vboxnetflt
parport_pc             32866  0
ppdev                  17113  0
rfcomm                 47604  0
bnep                   18281  0
bluetooth             180104  4 rfcomm,bnep
binfmt_misc            17540  1
vesafb                 13844  1
dell_wmi               12681  0
sparse_keymap          13890  1 dell_wmi
dell_laptop            18119  0
dcdbas                 14490  1 dell_laptop
joydev                 17693  0
uvcvideo               72627  0
videodev               98259  1 uvcvideo
v4l2_compat_ioctl32    17128  1 videodev
snd_hda_codec_hdmi     32474  1
psmouse                87692  0
serio_raw              13211  0
snd_hda_codec_idt      70795  1
lib80211_crypt_tkip    17390  0
video                  19596  0
wmi                    19256  1 dell_wmi
fglrx                3263886  120
wl                   2568210  0
snd_seq_midi           13324  0
snd_rawmidi            30748  1 snd_seq_midi
snd_seq_midi_event     14899  1 snd_seq_midi
mac_hid                13253  0
lib80211               14381  2 lib80211_crypt_tkip,wl
snd_seq                61896  2 snd_seq_midi,snd_seq_midi_event
snd_hda_intel          33773  5
snd_hda_codec         127706  3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel
snd_hwdep              13668  1 snd_hda_codec
snd_pcm                97188  3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
snd_seq_device         14540  3 snd_seq_midi,snd_rawmidi,snd_seq
snd_timer              29990  2 snd_seq,snd_pcm
snd                    78855  20 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_rawmidi,snd_seq,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq_device,snd_timer
soundcore              15091  1 snd
snd_page_alloc         18529  2 snd_hda_intel,snd_pcm
mei                    41616  0
lp                     17799  0
parport                46562  3 parport_pc,ppdev,lp
usbhid                 47199  0
hid                    99559  1 usbhid
r8169                  62099  0
             total       used       free     shared    buffers     cached
Mem:       3008756    2623552     385204          0      37388    1785728
-/+ buffers/cache:     800436    2208320
Swap:       102396        268     102128

/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:

/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01PulseAudio suspend suspend:
Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>>
/usr/lib/pm-utils/sleep.d/01PulseAudio suspend suspend: success.
Running hook /etc/pm/sleep.d/10_grub-common suspend suspend:

/etc/pm/sleep.d/10_grub-common suspend suspend: success.
Running hook /etc/pm/sleep.d/10_unattended-upgrades-hibernate suspend suspend:

/etc/pm/sleep.d/10_unattended-upgrades-hibernate suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend:
Having NetworkManager put all interaces to sleep...Failed.

/usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/60_wpa_supplicant suspend suspend:
Failed to connect to wpa_supplicant - wpa_ctrl_open: No such file or directory

/usr/lib/pm-utils/sleep.d/60_wpa_supplicant suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:

/usr/lib/pm-utils/sleep.d/75modules suspend suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:

/usr/lib/pm-utils/sleep.d/90clock suspend suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:

/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95anacron suspend suspend:
stop: Unknown instance:

/usr/lib/pm-utils/sleep.d/95anacron suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95hdparm-apm suspend suspend:

/usr/lib/pm-utils/sleep.d/95hdparm-apm suspend suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:

/usr/lib/pm-utils/sleep.d/95led suspend suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
ATI Catalyst driver detected, not using quirks.

/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0

/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
Running hook /etc/pm/sleep.d/novatel_3g_suspend suspend suspend:

/etc/pm/sleep.d/novatel_3g_suspend suspend suspend: success.
Sun Jun 24 17:52:58 EEST 2012: performing suspend
Sun Jun 24 18:42:00 EEST 2012: Awake.
Sun Jun 24 18:42:00 EEST 2012: Running hooks for resume
Running hook /etc/pm/sleep.d/novatel_3g_suspend resume suspend:

/etc/pm/sleep.d/novatel_3g_suspend resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video resume suspend:

/usr/lib/pm-utils/sleep.d/99video resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend:

/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led resume suspend:

/usr/lib/pm-utils/sleep.d/95led resume suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/95hdparm-apm resume suspend:

/dev/sda:
setting Advanced Power Management level to 0xfe (254)
APM_level = 254

/dev/sda:
setting Advanced Power Management level to 0xfe (254)
APM_level = 254

/usr/lib/pm-utils/sleep.d/95hdparm-apm resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95anacron resume suspend:

/usr/lib/pm-utils/sleep.d/95anacron resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend:

/usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock resume suspend:

/usr/lib/pm-utils/sleep.d/90clock resume suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/75modules resume suspend:
Reloaded unloaded modules.

/usr/lib/pm-utils/sleep.d/75modules resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/60_wpa_supplicant resume suspend:
Failed to connect to wpa_supplicant - wpa_ctrl_open: No such file or directory

/usr/lib/pm-utils/sleep.d/60_wpa_supplicant resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend:
Having NetworkManager wake interfaces back up...Failed.

/usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend: success.
Running hook /etc/pm/sleep.d/10_unattended-upgrades-hibernate resume suspend:

/etc/pm/sleep.d/10_unattended-upgrades-hibernate resume suspend: success.
Running hook /etc/pm/sleep.d/10_grub-common resume suspend:

/etc/pm/sleep.d/10_grub-common resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01PulseAudio resume suspend:
Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>>
/usr/lib/pm-utils/sleep.d/01PulseAudio resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave resume suspend:

/usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00logging resume suspend:

/usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/000kernel-change resume suspend:

/usr/lib/pm-utils/sleep.d/000kernel-change resume suspend: success.
Sun Jun 24 18:42:01 EEST 2012: Finished.
Initial commandline parameters:
Sun Jun 24 20:58:10 EEST 2012: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/000kernel-change suspend suspend:

/usr/lib/pm-utils/sleep.d/000kernel-change suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
Linux emre-pc 3.2.0-25-generic #40-Ubuntu SMP Wed May 23 20:30:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux
Module                  Size  Used by
michael_mic            12612  0
arc4                   12529  0
pci_stub               12622  1
vboxpci                23200  0
vboxnetadp             25670  0
vboxnetflt             23441  0
vboxdrv               287082  3 vboxpci,vboxnetadp,vboxnetflt
parport_pc             32866  0
ppdev                  17113  0
rfcomm                 47604  0
bnep                   18281  0
bluetooth             180104  4 rfcomm,bnep
binfmt_misc            17540  1
vesafb                 13844  1
dell_wmi               12681  0
sparse_keymap          13890  1 dell_wmi
dell_laptop            18119  0
dcdbas                 14490  1 dell_laptop
joydev                 17693  0
uvcvideo               72627  0
videodev               98259  1 uvcvideo
v4l2_compat_ioctl32    17128  1 videodev
snd_hda_codec_hdmi     32474  1
psmouse                87692  0
serio_raw              13211  0
snd_hda_codec_idt      70795  1
lib80211_crypt_tkip    17390  0
video                  19596  0
wmi                    19256  1 dell_wmi
fglrx                3263886  160
wl                   2568210  0
snd_seq_midi           13324  0
snd_rawmidi            30748  1 snd_seq_midi
snd_seq_midi_event     14899  1 snd_seq_midi
mac_hid                13253  0
lib80211               14381  2 lib80211_crypt_tkip,wl
snd_seq                61896  2 snd_seq_midi,snd_seq_midi_event
snd_hda_intel          33773  5
snd_hda_codec         127706  3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel
snd_hwdep              13668  1 snd_hda_codec
snd_pcm                97188  3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
snd_seq_device         14540  3 snd_seq_midi,snd_rawmidi,snd_seq
snd_timer              29990  2 snd_seq,snd_pcm
snd                    78855  20 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_rawmidi,snd_seq,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq_device,snd_timer
soundcore              15091  1 snd
snd_page_alloc         18529  2 snd_hda_intel,snd_pcm
mei                    41616  0
lp                     17799  0
parport                46562  3 parport_pc,ppdev,lp
usbhid                 47199  0
hid                    99559  1 usbhid
r8169                  62099  0
             total       used       free     shared    buffers     cached
Mem:       3008756    2551360     457396          0     782568     866724
-/+ buffers/cache:     902068    2106688
Swap:       102396         40     102356

/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:

/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01PulseAudio suspend suspend:
Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>>
/usr/lib/pm-utils/sleep.d/01PulseAudio suspend suspend: success.
Running hook /etc/pm/sleep.d/10_grub-common suspend suspend:

/etc/pm/sleep.d/10_grub-common suspend suspend: success.
Running hook /etc/pm/sleep.d/10_unattended-upgrades-hibernate suspend suspend:

/etc/pm/sleep.d/10_unattended-upgrades-hibernate suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend:
Having NetworkManager put all interaces to sleep...Failed.

/usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/60_wpa_supplicant suspend suspend:
Failed to connect to wpa_supplicant - wpa_ctrl_open: No such file or directory

/usr/lib/pm-utils/sleep.d/60_wpa_supplicant suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:

/usr/lib/pm-utils/sleep.d/75modules suspend suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:

/usr/lib/pm-utils/sleep.d/90clock suspend suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:

/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95anacron suspend suspend:
stop: Unknown instance:

/usr/lib/pm-utils/sleep.d/95anacron suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95hdparm-apm suspend suspend:

/usr/lib/pm-utils/sleep.d/95hdparm-apm suspend suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:

/usr/lib/pm-utils/sleep.d/95led suspend suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
ATI Catalyst driver detected, not using quirks.

/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0

/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
Running hook /etc/pm/sleep.d/novatel_3g_suspend suspend suspend:

/etc/pm/sleep.d/novatel_3g_suspend suspend suspend: success.
Sun Jun 24 20:58:15 EEST 2012: performing suspend
Sun Jun 24 21:02:05 EEST 2012: Awake.
Sun Jun 24 21:02:05 EEST 2012: Running hooks for resume
Running hook /etc/pm/sleep.d/novatel_3g_suspend resume suspend:

/etc/pm/sleep.d/novatel_3g_suspend resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video resume suspend:

/usr/lib/pm-utils/sleep.d/99video resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend:

/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led resume suspend:

/usr/lib/pm-utils/sleep.d/95led resume suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/95hdparm-apm resume suspend:

/dev/sda:
setting Advanced Power Management level to 0xfe (254)
APM_level = 254

/dev/sda:
setting Advanced Power Management level to 0xfe (254)
APM_level = 254

/usr/lib/pm-utils/sleep.d/95hdparm-apm resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95anacron resume suspend:

/usr/lib/pm-utils/sleep.d/95anacron resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend:

/usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock resume suspend:

/usr/lib/pm-utils/sleep.d/90clock resume suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/75modules resume suspend:
Reloaded unloaded modules.

/usr/lib/pm-utils/sleep.d/75modules resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/60_wpa_supplicant resume suspend:
Failed to connect to wpa_supplicant - wpa_ctrl_open: No such file or directory

/usr/lib/pm-utils/sleep.d/60_wpa_supplicant resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend:
Having NetworkManager wake interfaces back up...Failed.

/usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend: success.
Running hook /etc/pm/sleep.d/10_unattended-upgrades-hibernate resume suspend:

/etc/pm/sleep.d/10_unattended-upgrades-hibernate resume suspend: success.
Running hook /etc/pm/sleep.d/10_grub-common resume suspend:

/etc/pm/sleep.d/10_grub-common resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01PulseAudio resume suspend:
Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>>
/usr/lib/pm-utils/sleep.d/01PulseAudio resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave resume suspend:

/usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00logging resume suspend:

/usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/000kernel-change resume suspend:

/usr/lib/pm-utils/sleep.d/000kernel-change resume suspend: success.
Sun Jun 24 21:02:06 EEST 2012: Finished.
Initial commandline parameters:
Mon Jun 25 18:49:29 EEST 2012: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/000kernel-change suspend suspend:

/usr/lib/pm-utils/sleep.d/000kernel-change suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
Linux emre-pc 3.2.0-25-generic #40-Ubuntu SMP Wed May 23 20:30:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux
Module                  Size  Used by
michael_mic            12612  0
arc4                   12529  0
pci_stub               12622  1
vboxpci                23200  0
vboxnetadp             25670  0
vboxnetflt             23441  0
vboxdrv               287082  3 vboxpci,vboxnetadp,vboxnetflt
rfcomm                 47604  0
parport_pc             32866  0
bnep                   18281  2
ppdev                  17113  0
bluetooth             180104  10 rfcomm,bnep
vesafb                 13844  1
binfmt_misc            17540  1
snd_hda_codec_hdmi     32474  1
snd_hda_codec_idt      70795  1
snd_hda_intel          33773  5
snd_hda_codec         127706  3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel
snd_hwdep              13668  1 snd_hda_codec
snd_pcm                97188  3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
snd_seq_midi           13324  0
snd_rawmidi            30748  1 snd_seq_midi
snd_seq_midi_event     14899  1 snd_seq_midi
snd_seq                61896  2 snd_seq_midi,snd_seq_midi_event
dell_wmi               12681  0
sparse_keymap          13890  1 dell_wmi
fglrx                3263886  101
snd_timer              29990  2 snd_pcm,snd_seq
snd_seq_device         14540  3 snd_seq_midi,snd_rawmidi,snd_seq
lib80211_crypt_tkip    17390  0
snd                    78855  20 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
wl                   2568210  0
video                  19596  0
uvcvideo               72627  0
dell_laptop            18119  0
wmi                    19256  1 dell_wmi
dcdbas                 14490  1 dell_laptop
videodev               98259  1 uvcvideo
v4l2_compat_ioctl32    17128  1 videodev
joydev                 17693  0
mac_hid                13253  0
psmouse                87692  0
serio_raw              13211  0
lib80211               14381  2 lib80211_crypt_tkip,wl
soundcore              15091  1 snd
snd_page_alloc         18529  2 snd_hda_intel,snd_pcm
lp                     17799  0
mei                    41616  0
parport                46562  3 parport_pc,ppdev,lp
usbhid                 47199  0
hid                    99559  1 usbhid
r8169                  62099  0
             total       used       free     shared    buffers     cached
Mem:       3008756    1387624    1621132          0      85072     755332
-/+ buffers/cache:     547220    2461536
Swap:       102396          0     102396

/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:

/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01PulseAudio suspend suspend:
Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>>
/usr/lib/pm-utils/sleep.d/01PulseAudio suspend suspend: success.
Running hook /etc/pm/sleep.d/10_grub-common suspend suspend:

/etc/pm/sleep.d/10_grub-common suspend suspend: success.
Running hook /etc/pm/sleep.d/10_unattended-upgrades-hibernate suspend suspend:

/etc/pm/sleep.d/10_unattended-upgrades-hibernate suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend:
Having NetworkManager put all interaces to sleep...Failed.

/usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/60_wpa_supplicant suspend suspend:
Failed to connect to wpa_supplicant - wpa_ctrl_open: No such file or directory

/usr/lib/pm-utils/sleep.d/60_wpa_supplicant suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:

/usr/lib/pm-utils/sleep.d/75modules suspend suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:

/usr/lib/pm-utils/sleep.d/90clock suspend suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:

/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95anacron suspend suspend:
stop: Unknown instance:

/usr/lib/pm-utils/sleep.d/95anacron suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95hdparm-apm suspend suspend:

/usr/lib/pm-utils/sleep.d/95hdparm-apm suspend suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:

/usr/lib/pm-utils/sleep.d/95led suspend suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
ATI Catalyst driver detected, not using quirks.

/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0

/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
Running hook /etc/pm/sleep.d/novatel_3g_suspend suspend suspend:

/etc/pm/sleep.d/novatel_3g_suspend suspend suspend: success.
Mon Jun 25 18:49:31 EEST 2012: performing suspend
Mon Jun 25 20:18:13 EEST 2012: Awake.
Mon Jun 25 20:18:13 EEST 2012: Running hooks for resume
Running hook /etc/pm/sleep.d/novatel_3g_suspend resume suspend:

/etc/pm/sleep.d/novatel_3g_suspend resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video resume suspend:

/usr/lib/pm-utils/sleep.d/99video resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend:

/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led resume suspend:

/usr/lib/pm-utils/sleep.d/95led resume suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/95hdparm-apm resume suspend:

/dev/sda:
setting Advanced Power Management level to 0xfe (254)
APM_level = 254

/dev/sda:
setting Advanced Power Management level to 0xfe (254)
APM_level = 254

/usr/lib/pm-utils/sleep.d/95hdparm-apm resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95anacron resume suspend:

/usr/lib/pm-utils/sleep.d/95anacron resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend:

/usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock resume suspend:

/usr/lib/pm-utils/sleep.d/90clock resume suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/75modules resume suspend:
Reloaded unloaded modules.

/usr/lib/pm-utils/sleep.d/75modules resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/60_wpa_supplicant resume suspend:
Failed to connect to wpa_supplicant - wpa_ctrl_open: No such file or directory

/usr/lib/pm-utils/sleep.d/60_wpa_supplicant resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend:
Having NetworkManager wake interfaces back up...Failed.

/usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend: success.
Running hook /etc/pm/sleep.d/10_unattended-upgrades-hibernate resume suspend:

/etc/pm/sleep.d/10_unattended-upgrades-hibernate resume suspend: success.
Running hook /etc/pm/sleep.d/10_grub-common resume suspend:

/etc/pm/sleep.d/10_grub-common resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01PulseAudio resume suspend:
Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>> Welcome to PulseAudio! Use "help" for usage information.
>>> >>>
/usr/lib/pm-utils/sleep.d/01PulseAudio resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave resume suspend:

/usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00logging resume suspend:

/usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/000kernel-change resume suspend:

/usr/lib/pm-utils/sleep.d/000kernel-change resume suspend: success.
Mon Jun 25 20:18:14 EEST 2012: Finished.



cat /proc/acpi/wakeup

Device S-state   Status   Sysfs node
P0P1   S3 *disabled  pci:0000:00:01.0
P0P2   S3 *disabled 
P0P3   S3 *disabled 
P0P4   S3 *disabled 
P0P5   S3 *disabled 
BR20   S3 *disabled  pci:0000:00:1e.0
PEX0   S3 *disabled  pci:0000:00:1c.0
PEX1   S3 *disabled  pci:0000:00:1c.1
PEX2   S4 *disabled  pci:0000:00:1c.2
PEX3   S3 *disabled 
PEX4   S3 *disabled  pci:0000:00:1c.4
PEX5   S3 *disabled 
PEX6   S3 *disabled 
PEX7   S3 *disabled 
GBE   S4 *disabled 
EHC2   S0 *enabled   pci:0000:00:1a.0
EHCI   S0 *enabled   pci:0000:00:1d.0
LID0   S3 *enabled   




Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 25 Haziran 2012 - 22:05:20

Harddisk bozulma aşamasına gelmişse yada bozulmuşsa Garantisine başvurabilirm. Garantisi henüz bitmedi, kullanıcı hatası diyebilecekleri de bir durum yaşamadım sanırım yardımcı olurlar /: yani eğer kesin birşey varsa tabi?

if


dokuzyuzon

Kapanması çok kısa sürdü. hatta kapanırken ekranda bir takım yazılar yazdı.(yazmasıyla kapanması neredeyse bir oldu okuyamadım.)
Yeniden açtığımda da en fazla 20 saniye sürmüştür. Yani düzeldi gibi? bir daha deneyeyim mi :D ?

if


dokuzyuzon

Üç kez denedim, bir problem çıkmadı normal şekilde açılıp kapanıyor artık. Umarım tekrarlanmaz bu yavaşlık meselesi ve de tabi hdd ye birşey olmaz :D
Sizlere ne kadar teşekkür etsem azdır. Yardımcı olduğunuz için çok ama çok teşekkür ederim. Artık kafayı yeme noktasına gelmiştim. :) Tekrar tekrar teşekkür ediyorum.

if

Rica ederim @dokuzyuzon da diski ihmâl etmeyin:)

Çözüldü etiketi alayım o zaman: cozuldukonusu

dokuzyuzon

Bu disk için tam olarak ne yapmam gerekiyor, verdiğiniz kodu çalıştırmam yapabileceğim tek şey mi? :)

if

@dokuzyuzon, fsck kurtarır mı bilmem. fsck uyguladıktan sonra durumuna bakmak gerek. fsck çıktısına da bakmak gerek.

dokuzyuzon

Pekâlâ şimdi deniyorum. Onun için yeni bir konu açmama gerek yoktur herhalde. Yani kilitlenmez ise iyi olur :D


dokuzyuzon

Canlı cd olayını yanlış mı anladım ben? Kurulum yaptığım cd ile başlattım bilgisayarı, Dene dedim ve konsolu açtım ve komutu yazdım ama programlar kullanılıyor olabilir dedi? canlı cd dediğiniz acaba başka  bir şey mi? :D

if

@dokuzyuzon, canlı cd dediğim Ubuntu'yu kurduğunuz cd. Ubuntu'yu yüklemeden dene deyip açmalısınız. Eğer böyleyse sudo fdisk -l
mount
çıktısına bakayım.

dokuzyuzon

sudo fdisk -l

Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x65cd6ca8

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1            2048      206847      102400   de  Dell Utility
/dev/sda2   *      206848   248930303   124361728   83  Linux
/dev/sda4       248932350   625139711   188103681    f  W95 Ext'd (LBA)
/dev/sda5       248932352   625139711   188103680    7  HPFS/NTFS/exFAT


mount

/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sr0 on /cdrom type iso9660 (ro,noatime)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
gvfs-fuse-daemon on /home/ubuntu/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=ubuntu)


sudo fsck /dev/sda
fsck from util-linux 2.20.1
e2fsck 1.42 (29-Nov-2011)
fsck.ext2: Device or resource busy - /dev/sda açılmaya çalışılırken hata oluştu
Dosyasistemi başka bir uygulama tarafından özellikle bağlanmış veya açılmış
olabilir mi?


if

@dokuzyuzon, bilinen bir böceğe denk geldik. Başka bir canlı cd/usb varsa onunla deneyin. Aynı sürüm olması da gerekmez. Ama çok eski olmasın.

dokuzyuzon

peki, olacaktı evde arıyorum bulduğumda sürümünü söylerim eski olabilir.


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 26 Haziran 2012 - 00:41:11

Malsef cd leri bulamadım sanırım atılmışlar :/ Küçük boyutlu canlı cd yapabileceğim bir sistem var mı? hemen indirebileceğim :D ?

burk


dokuzyuzon