Açılışta Systray Sorunu

[zeusmaster]

He açılışta şöyle bir hata iletisi almaktayım.

Kod Seç Genişlet

I couldn't detect any system tray on this system.
Gnome masaüstü kullanmaktayım.Şunu farkettim sistemi Unity ile açınca masaüstü gelmiyor. Gnome ile açılışta da bu hatayı veriyor.

[if]

@bahdem,

Kod Seç Genişlet

dpkg -l | grep -v ^ii
cat /var/log/Xorg.0.log
dmesg | tail -n 40 çıktılarını alabilir miyim?

[zeusmaster]

Kod Seç Genişlet

bahdem@bahdem:~$ dmesg | tail -n 40
[   23.347876] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   23.348232] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   23.441129] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input11
[   23.465088] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[   23.465091] vesafb: scrolling: redraw
[   23.465093] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[   23.465102] mtrr: no more MTRRs available
[   23.466010] vesafb: framebuffer at 0xa0000000, mapped to 0xffffc90011a00000, using 4160k, total 4160k
[   23.466406] Console: switching to colour frame buffer device 170x48
[   23.466435] fb0: VESA VGA frame buffer device
[   23.991433] [fglrx] ATIF platform detected with notification ID: 0x81
[   24.200162] tg3 0000:02:00.0: eth0: Link is down
[   24.578402] vboxdrv: Found 4 processor cores.
[   24.578638] vboxdrv: fAsync=0 offMin=0x310 offMax=0x1485
[   24.578707] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   24.578709] vboxdrv: Successfully loaded version 4.1.12_Ubuntu (interface 0x00190000).
[   24.586242] vboxpci: IOMMU not found (not registered)
[   25.111749] fglrx_pci 0000:01:00.0: irq 46 for MSI/MSI-X
[   25.112433] [fglrx] Firegl kernel thread PID: 1365
[   25.112598] [fglrx] Firegl kernel thread PID: 1366
[   25.112760] [fglrx] Firegl kernel thread PID: 1367
[   25.112962] [fglrx] IRQ 46 Enabled
[   25.208669] [fglrx] Gart USWC size:1280 M.
[   25.208672] [fglrx] Gart cacheable size:508 M.
[   25.208677] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[   25.208679] [fglrx] Reserved FB block: Unshared offset:f8fd000, size:403000
[   25.208680] [fglrx] Reserved FB block: Unshared offset:1fff4000, size:c000
[   26.003094] wlan0: authenticate with 74:ea:3a:fd:52:05 (try 1)
[   26.005067] wlan0: authenticated
[   26.005259] wlan0: associate with 74:ea:3a:fd:52:05 (try 1)
[   26.007854] wlan0: RX AssocResp from 74:ea:3a:fd:52:05 (capab=0x431 status=0 aid=6)
[   26.007858] wlan0: associated
[   26.017701] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   36.644263] wlan0: no IPv6 routers present
[   63.060016] usb 2-1.2: new low-speed USB device number 3 using ehci_hcd
[   63.233002] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input12
[   63.233195] generic-usb 0003:046D:C51B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input0
[   63.235483] generic-usb 0003:046D:C51B.0002: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input1
[   63.235503] usbcore: registered new interface driver usbhid
[   63.235505] usbhid: USB HID core driver
bahdem@bahdem:~$ dpkg -l | grep -v ^ii
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ Name                                                        Version                                       Description
+++-===========================================================-=============================================-==============================================================================


Kod Seç Genişlet

rxdrm.so
[    23.492] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[    23.492] compiled for 1.4.99.906, module version = 8.96.4
[    23.494] ukiDynamicMajor: found major device number 250
[    23.494] ukiDynamicMajor: found major device number 250
[    23.494] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    23.494] ukiOpenDevice: node name is /dev/ati/card0
[    23.494] ukiOpenDevice: open result is 12, (OK)
[    23.494] ukiOpenByBusid: ukiOpenMinor returns 12
[    23.494] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    23.494] (**) fglrx(0): NoAccel = NO
[    23.494] (**) fglrx(0): ATI 2D Acceleration Architecture enabled
[    23.494] (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 5000 Series" (Chipset = 0x68e0)
[    23.494] (--) fglrx(0): (PciSubVendor = 0x1025, PciSubDevice = 0x0487)
[    23.494] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[    23.494] (--) fglrx(0): Linear framebuffer (phys) at 0xa0000000
[    23.494] (--) fglrx(0): MMIO registers at 0xb4000000
[    23.494] (--) fglrx(0): I/O port at 0x00003000
[    23.494] (==) fglrx(0): ROM-BIOS at 0x000c0000
[    24.192] (II) fglrx(0): ATIF platform detected
[    24.692] (II) fglrx(0): Battery is used
[    24.694] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[    24.694] (II) Loading sub module "vbe"
[    24.694] (II) LoadModule: "vbe"
[    24.694] (II) Loading /usr/lib/xorg/modules/libvbe.so
[    24.694] (II) Module vbe: vendor="X.Org Foundation"
[    24.694] compiled for 1.11.3, module version = 1.1.0
[    24.695] ABI class: X.Org Video Driver, version 11.0
[    24.695] (II) fglrx(0): VESA BIOS detected
[    24.695] (II) fglrx(0): VESA VBE Version 3.0
[    24.695] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[    24.695] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[    24.695] (II) fglrx(0): VESA VBE OEM Software Rev: 12.20
[    24.695] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[    24.695] (II) fglrx(0): VESA VBE OEM Product: PARK
[    24.695] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[    24.718] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[    24.718] (--) fglrx(0): Video RAM: 524288 kByte, Type: DDR3
[    24.718] (II) fglrx(0): PCIE card detected
[    24.718] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[    24.718] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[    24.723] (II) fglrx(0): Using adapter: 1:0.0.
[    24.752] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
[    24.814] (II) fglrx(0): Interrupt handler installed at IRQ 46.
[    24.814] (II) fglrx(0): RandR 1.2 support is enabled!
[    24.814] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[    24.814] (==) fglrx(0): Center Mode is disabled
[    24.814] (II) Loading sub module "fb"
[    24.814] (II) LoadModule: "fb"
[    24.814] (II) Loading /usr/lib/xorg/modules/libfb.so
[    24.815] (II) Module fb: vendor="X.Org Foundation"
[    24.815] compiled for 1.11.3, module version = 1.0.0
[    24.815] ABI class: X.Org ANSI C Emulation, version 0.4
[    24.815] (II) Loading sub module "ddc"
[    24.815] (II) LoadModule: "ddc"
[    24.815] (II) Module "ddc" already built-in
[    24.907] (II) fglrx(0): Finished Initialize PPLIB!
[    24.908] (II) fglrx(0): Output LVDS has no monitor section
[    24.908] (II) fglrx(0): Output DFP1 has no monitor section
[    24.908] (II) fglrx(0): Output CRT1 has no monitor section
[    24.908] (II) Loading sub module "ddc"
[    24.908] (II) LoadModule: "ddc"
[    24.908] (II) Module "ddc" already built-in
[    24.908] (II) fglrx(0): Connected Display0: LVDS
[    24.908] (II) fglrx(0): Display0 EDID data ---------------------------
[    24.908] (II) fglrx(0): Manufacturer: LGD  Model: d801  Serial#: 0
[    24.908] (II) fglrx(0): Year: 2008  Week: 0
[    24.908] (II) fglrx(0): EDID Version: 1.3
[    24.908] (II) fglrx(0): Digital Display Input
[    24.908] (II) fglrx(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    24.908] (II) fglrx(0): Gamma: 2.20
[    24.908] (II) fglrx(0): No DPMS capabilities specified
[    24.908] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    24.908] (II) fglrx(0): First detailed timing is preferred mode
[    24.908] (II) fglrx(0): redX: 0.640 redY: 0.353   greenX: 0.319 greenY: 0.572
[    24.908] (II) fglrx(0): blueX: 0.148 blueY: 0.102   whiteX: 0.313 whiteY: 0.329
[    24.908] (II) fglrx(0): Manufacturer's mask: 0
[    24.908] (II) fglrx(0): Supported detailed timing:
[    24.908] (II) fglrx(0): clock: 72.3 MHz   Image Size:  344 x 194 mm
[    24.908] (II) fglrx(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1526 h_border: 0
[    24.908] (II) fglrx(0): v_active: 768  v_sync: 771  v_sync_end 776 v_blanking: 790 v_border: 0
[    24.908] (II) fglrx(0):  LG Display
[    24.908] (II) fglrx(0):  LP156WH1-TLC1
[    24.908] (II) fglrx(0): EDID (in hex):
[    24.908] (II) fglrx(0): 00ffffffffffff0030e401d800000000
[    24.908] (II) fglrx(0): 00120103802213780ade05a35a519226
[    24.908] (II) fglrx(0): 1a505400000001010101010101010101
[    24.908] (II) fglrx(0): 0101010101013e1c56a0500016303020
[    24.908] (II) fglrx(0): 350058c2100000190000000000000000
[    24.908] (II) fglrx(0): 00000000000000000000000000fe004c
[    24.908] (II) fglrx(0): 4720446973706c61790a2020000000fe
[    24.908] (II) fglrx(0): 004c503135365748312d544c4331004f
[    24.908] (II) fglrx(0): End of Display0 EDID data --------------------
[    24.908] (II) fglrx(0): EDID for output LVDS
[    24.908] (II) fglrx(0): Manufacturer: LGD  Model: d801  Serial#: 0
[    24.908] (II) fglrx(0): Year: 2008  Week: 0
[    24.908] (II) fglrx(0): EDID Version: 1.3
[    24.908] (II) fglrx(0): Digital Display Input
[    24.908] (II) fglrx(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    24.908] (II) fglrx(0): Gamma: 2.20
[    24.908] (II) fglrx(0): No DPMS capabilities specified
[    24.908] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    24.908] (II) fglrx(0): First detailed timing is preferred mode
[    24.908] (II) fglrx(0): redX: 0.640 redY: 0.353   greenX: 0.319 greenY: 0.572
[    24.908] (II) fglrx(0): blueX: 0.148 blueY: 0.102   whiteX: 0.313 whiteY: 0.329
[    24.908] (II) fglrx(0): Manufacturer's mask: 0
[    24.908] (II) fglrx(0): Supported detailed timing:
[    24.908] (II) fglrx(0): clock: 72.3 MHz   Image Size:  344 x 194 mm
[    24.909] (II) fglrx(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1526 h_border: 0
[    24.909] (II) fglrx(0): v_active: 768  v_sync: 771  v_sync_end 776 v_blanking: 790 v_border: 0
[    24.909] (II) fglrx(0):  LG Display
[    24.909] (II) fglrx(0):  LP156WH1-TLC1
[    24.909] (II) fglrx(0): EDID (in hex):
[    24.909] (II) fglrx(0): 00ffffffffffff0030e401d800000000
[    24.909] (II) fglrx(0): 00120103802213780ade05a35a519226
[    24.909] (II) fglrx(0): 1a505400000001010101010101010101
[    24.909] (II) fglrx(0): 0101010101013e1c56a0500016303020
[    24.909] (II) fglrx(0): 350058c2100000190000000000000000
[    24.909] (II) fglrx(0): 00000000000000000000000000fe004c
[    24.909] (II) fglrx(0): 4720446973706c61790a2020000000fe
[    24.909] (II) fglrx(0): 004c503135365748312d544c4331004f
[    24.909] (II) fglrx(0): EDID vendor "LGD", prod id 55297
[    24.909] (II) fglrx(0): Printing DDC gathered Modelines:
[    24.909] (II) fglrx(0): Modeline "1366x768"x0.0   72.30  1366 1414 1446 1526  768 771 776 790 -hsync -vsync (47.4 kHz)
[    24.909] (II) fglrx(0): Printing probed modes for output LVDS
[    24.909] (II) fglrx(0): Modeline "1366x768"x60.0   72.30  1366 1414 1446 1526  768 771 776 790 -hsync -vsync (47.4 kHz)
[    24.909] (II) fglrx(0): Modeline "1360x768"x60.0   72.30  1360 1414 1446 1526  768 771 776 790 -hsync -vsync (47.4 kHz)
[    24.909] (II) fglrx(0): Modeline "1280x768"x60.0   72.30  1280 1414 1446 1526  768 771 776 790 -hsync -vsync (47.4 kHz)
[    24.909] (II) fglrx(0): Modeline "1280x720"x60.0   72.30  1280 1414 1446 1526  720 771 776 790 -hsync -vsync (47.4 kHz)
[    24.909] (II) fglrx(0): Modeline "1024x768"x60.0   72.30  1024 1414 1446 1526  768 771 776 790 -hsync -vsync (47.4 kHz)
[    24.909] (II) fglrx(0): Modeline "1024x600"x60.0   72.30  1024 1414 1446 1526  600 771 776 790 -hsync -vsync (47.4 kHz)
[    24.909] (II) fglrx(0): Modeline "800x600"x60.0   72.30  800 1414 1446 1526  600 771 776 790 -hsync -vsync (47.4 kHz)
[    24.909] (II) fglrx(0): Modeline "800x480"x60.0   72.30  800 1414 1446 1526  480 771 776 790 -hsync -vsync (47.4 kHz)
[    24.909] (II) fglrx(0): Modeline "640x480"x60.0   72.30  640 1414 1446 1526  480 771 776 790 -hsync -vsync (47.4 kHz)
[    24.909] (II) fglrx(0): EDID for output DFP1
[    24.909] (II) fglrx(0): EDID for output CRT1
[    24.909] (II) fglrx(0): Output LVDS connected
[    24.909] (II) fglrx(0): Output DFP1 disconnected
[    24.909] (II) fglrx(0): Output CRT1 disconnected
[    24.909] (II) fglrx(0): Using exact sizes for initial modes
[    24.909] (II) fglrx(0): Output LVDS using initial mode 1366x768
[    24.909] (II) fglrx(0): Display dimensions: (340, 190) mm
[    24.909] (II) fglrx(0): DPI set to (102, 102)
[    24.909] (II) fglrx(0): Eyefinity capable adapter detected.
[    24.909] (II) fglrx(0): Adapter ATI Mobility Radeon HD 5000 Series has 4 configurable heads and 1 displays connected.
[    24.909] (==) fglrx(0):  PseudoColor visuals disabled
[    24.909] (II) Loading sub module "ramdac"
[    24.909] (II) LoadModule: "ramdac"
[    24.909] (II) Module "ramdac" already built-in
[    24.909] (==) fglrx(0): NoDRI = NO
[    24.909] (==) fglrx(0): Capabilities: 0x00000000
[    24.909] (==) fglrx(0): CapabilitiesEx: 0x00000000
[    24.909] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[    24.909] (==) fglrx(0): UseFastTLS=0
[    24.909] (==) fglrx(0): BlockSignalsOnLock=1
[    24.909] (II) UnloadModule: "radeon"
[    24.909] (II) Unloading radeon
[    24.909] (II) UnloadModule: "vesa"
[    24.909] (II) Unloading vesa
[    24.909] (II) UnloadModule: "fbdev"
[    24.909] (II) Unloading fbdev
[    24.909] (II) UnloadModule: "fbdevhw"
[    24.909] (II) Unloading fbdevhw
[    24.909] (--) Depth 24 pixmap format is 32 bpp
[    24.909] (II) Loading extension ATIFGLRXDRI
[    24.909] (II) fglrx(0): doing swlDriScreenInit
[    24.909] (II) fglrx(0): swlDriScreenInit for fglrx driver
[    24.909] ukiDynamicMajor: found major device number 250
[    24.909] ukiDynamicMajor: found major device number 250
[    24.909] ukiDynamicMajor: found major device number 250
[    24.909] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    24.909] ukiOpenDevice: node name is /dev/ati/card0
[    24.909] ukiOpenDevice: open result is 17, (OK)
[    24.909] ukiOpenByBusid: ukiOpenMinor returns 17
[    24.909] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    24.909] (II) fglrx(0): [uki] DRM interface version 1.0
[    24.909] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[    24.909] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[    24.909] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f72ee951000
[    24.909] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[    24.909] (II) fglrx(0): [uki] added 1 reserved context for kernel
[    24.909] (II) fglrx(0): swlDriScreenInit done
[    24.909] (II) fglrx(0): Kernel Module Version Information:
[    24.909] (II) fglrx(0):     Name: fglrx
[    24.910] (II) fglrx(0):     Version: 8.96.4
[    24.910] (II) fglrx(0):     Date: Mar 12 2012
[    24.910] (II) fglrx(0):     Desc: ATI FireGL DRM kernel module
[    24.910] (II) fglrx(0): Kernel Module version matches driver.
[    24.910] (II) fglrx(0): Kernel Module Build Time Information:
[    24.910] (II) fglrx(0):     Build-Kernel UTS_RELEASE:        3.2.0-24-generic
[    24.910] (II) fglrx(0):     Build-Kernel MODVERSIONS:        no
[    24.910] (II) fglrx(0):     Build-Kernel __SMP__:            yes
[    24.910] (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
[    24.910] (II) fglrx(0): [uki] register handle = 0x00004000
[    24.928] (II) fglrx(0): DRI initialization successfull
[    24.928] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01004000
[    24.928] (==) fglrx(0): Backing store disabled
[    24.928] (II) Loading extension FGLRXEXTENSION
[    24.928] (==) fglrx(0): DPMS enabled
[    24.928] (II) fglrx(0): Initialized in-driver Xinerama extension
[    24.928] (**) fglrx(0): Textured Video is enabled.
[    24.928] (II) LoadModule: "glesx"
[    24.928] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/glesx.so
[    24.929] (II) Module glesx: vendor="X.Org Foundation"
[    24.929] compiled for 1.4.99.906, module version = 1.0.0
[    24.929] (II) Loading extension GLESX
[    24.929] (II) fglrx(0): GLESX enableFlags = 592
[    24.929] (II) fglrx(0): GLESX is enabled
[    24.929] (II) LoadModule: "amdxmm"
[    24.929] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/amdxmm.so
[    24.929] (II) Module amdxmm: vendor="X.Org Foundation"
[    24.929] compiled for 1.4.99.906, module version = 2.0.0
[    24.938] (II) Loading extension AMDXVOPL
[    24.938] (II) Loading extension AMDXVBA
[    24.939] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[    24.940] (II) fglrx(0): Enable composite support successfully
[    24.940] (II) fglrx(0): X context handle = 0x1
[    24.940] (II) fglrx(0): [DRI] installation complete
[    24.940] (==) fglrx(0): Silken mouse enabled
[    24.941] (==) fglrx(0): Using HW cursor of display infrastructure!
[    24.941] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[    24.941] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[    24.941] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[    26.404] (--) RandR disabled
[    26.404] (II) Initializing built-in extension Generic Event Extension
[    26.404] (II) Initializing built-in extension SHAPE
[    26.404] (II) Initializing built-in extension MIT-SHM
[    26.404] (II) Initializing built-in extension XInputExtension
[    26.404] (II) Initializing built-in extension XTEST
[    26.404] (II) Initializing built-in extension BIG-REQUESTS
[    26.404] (II) Initializing built-in extension SYNC
[    26.404] (II) Initializing built-in extension XKEYBOARD
[    26.404] (II) Initializing built-in extension XC-MISC
[    26.404] (II) Initializing built-in extension SECURITY
[    26.404] (II) Initializing built-in extension XINERAMA
[    26.404] (II) Initializing built-in extension XFIXES
[    26.404] (II) Initializing built-in extension RENDER
[    26.404] (II) Initializing built-in extension RANDR
[    26.404] (II) Initializing built-in extension COMPOSITE
[    26.404] (II) Initializing built-in extension DAMAGE
[    26.406] ukiDynamicMajor: found major device number 250
[    26.406] ukiDynamicMajor: found major device number 250
[    26.406] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    26.406] ukiOpenDevice: node name is /dev/ati/card0
[    26.406] ukiOpenDevice: open result is 18, (OK)
[    26.406] ukiOpenByBusid: ukiOpenMinor returns 18
[    26.406] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    26.588] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[    26.599] (II) fglrx(0): Enable the clock gating!
[    26.600] (II) fglrx(0): Setting screen physical size to 361 x 203
[    26.607] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    26.609] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    26.609] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    26.609] (II) LoadModule: "evdev"
[    26.609] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    26.610] (II) Module evdev: vendor="X.Org Foundation"
[    26.610] compiled for 1.11.3, module version = 2.7.0
[    26.610] Module class: X.Org XInput Driver
[    26.610] ABI class: X.Org XInput driver, version 16.0
[    26.610] (II) Using input driver 'evdev' for 'Power Button'
[    26.610] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    26.610] (**) Power Button: always reports core events
[    26.610] (**) evdev: Power Button: Device: "/dev/input/event3"
[    26.610] (--) evdev: Power Button: Vendor 0 Product 0x1
[    26.610] (--) evdev: Power Button: Found keys
[    26.610] (II) evdev: Power Button: Configuring as keyboard
[    26.610] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    26.610] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    26.610] (**) Option "xkb_rules" "evdev"
[    26.610] (**) Option "xkb_model" "pc105"
[    26.610] (**) Option "xkb_layout" "tr"
[    26.611] (II) XKB: reuse xkmfile /var/lib/xkb/server-609880D4F1521A95A29BCD7AB1227A69EC9A1B72.xkm
[    26.612] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[    26.612] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    26.612] (II) Using input driver 'evdev' for 'Video Bus'
[    26.612] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    26.612] (**) Video Bus: always reports core events
[    26.612] (**) evdev: Video Bus: Device: "/dev/input/event6"
[    26.612] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    26.612] (--) evdev: Video Bus: Found keys
[    26.612] (II) evdev: Video Bus: Configuring as keyboard
[    26.612] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input6/event6"
[    26.612] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    26.612] (**) Option "xkb_rules" "evdev"
[    26.612] (**) Option "xkb_model" "pc105"
[    26.612] (**) Option "xkb_layout" "tr"
[    26.612] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    26.613] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    26.613] (II) Using input driver 'evdev' for 'Power Button'
[    26.613] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    26.613] (**) Power Button: always reports core events
[    26.613] (**) evdev: Power Button: Device: "/dev/input/event0"
[    26.613] (--) evdev: Power Button: Vendor 0 Product 0x1
[    26.613] (--) evdev: Power Button: Found keys
[    26.613] (II) evdev: Power Button: Configuring as keyboard
[    26.613] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:11/PNP0C0C:00/input/input0/event0"
[    26.613] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    26.613] (**) Option "xkb_rules" "evdev"
[    26.613] (**) Option "xkb_model" "pc105"
[    26.613] (**) Option "xkb_layout" "tr"
[    26.613] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    26.613] (II) No input driver specified, ignoring this device.
[    26.613] (II) This device may have been added with another device file.
[    26.613] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[    26.613] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    26.613] (II) Using input driver 'evdev' for 'Sleep Button'
[    26.613] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    26.613] (**) Sleep Button: always reports core events
[    26.613] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[    26.613] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    26.613] (--) evdev: Sleep Button: Found keys
[    26.613] (II) evdev: Sleep Button: Configuring as keyboard
[    26.613] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:11/PNP0C0E:00/input/input2/event2"
[    26.613] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    26.613] (**) Option "xkb_rules" "evdev"
[    26.613] (**) Option "xkb_model" "pc105"
[    26.613] (**) Option "xkb_layout" "tr"
[    26.614] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event9)
[    26.614] (II) No input driver specified, ignoring this device.
[    26.614] (II) This device may have been added with another device file.
[    26.614] (II) config/udev: Adding input device 1.3M WebCam (/dev/input/event10)
[    26.614] (**) 1.3M WebCam: Applying InputClass "evdev keyboard catchall"
[    26.614] (II) Using input driver 'evdev' for '1.3M WebCam'
[    26.614] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    26.614] (**) 1.3M WebCam: always reports core events
[    26.614] (**) evdev: 1.3M WebCam: Device: "/dev/input/event10"
[    26.614] (--) evdev: 1.3M WebCam: Vendor 0x402 Product 0x9665
[    26.614] (--) evdev: 1.3M WebCam: Found keys
[    26.614] (II) evdev: 1.3M WebCam: Configuring as keyboard
[    26.614] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input10/event10"
[    26.614] (II) XINPUT: Adding extended input device "1.3M WebCam" (type: KEYBOARD, id 10)
[    26.614] (**) Option "xkb_rules" "evdev"
[    26.614] (**) Option "xkb_model" "pc105"
[    26.614] (**) Option "xkb_layout" "tr"
[    26.615] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event7)
[    26.615] (II) No input driver specified, ignoring this device.
[    26.615] (II) This device may have been added with another device file.
[    26.615] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event8)
[    26.615] (II) No input driver specified, ignoring this device.
[    26.615] (II) This device may have been added with another device file.
[    26.615] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[    26.615] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    26.615] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    26.615] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    26.615] (**) AT Translated Set 2 keyboard: always reports core events
[    26.615] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[    26.615] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    26.615] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    26.615] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    26.615] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[    26.615] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[    26.615] (**) Option "xkb_rules" "evdev"
[    26.615] (**) Option "xkb_model" "pc105"
[    26.615] (**) Option "xkb_layout" "tr"
[    26.616] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event11)
[    26.616] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[    26.616] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[    26.616] (II) LoadModule: "synaptics"
[    26.616] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    26.616] (II) Module synaptics: vendor="X.Org Foundation"
[    26.616] compiled for 1.11.3, module version = 1.5.99
[    26.616] Module class: X.Org XInput Driver
[    26.616] ABI class: X.Org XInput driver, version 16.0
[    26.616] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[    26.616] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    26.616] (**) ETPS/2 Elantech Touchpad: always reports core events
[    26.616] (**) Option "Device" "/dev/input/event11"
[    26.748] (II) synaptics: ETPS/2 Elantech Touchpad: ignoring touch events for semi-multitouch device
[    26.748] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 1408
[    26.748] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 640
[    26.748] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[    26.748] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[    26.748] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[    26.748] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[    26.748] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    26.748] (**) ETPS/2 Elantech Touchpad: always reports core events
[    26.752] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11"
[    26.752] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 12)
[    26.752] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[    26.752] (**) synaptics: ETPS/2 Elantech Touchpad: MaxSpeed is now 1.75
[    26.752] (**) synaptics: ETPS/2 Elantech Touchpad: AccelFactor is now 0.129
[    26.752] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[    26.752] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[    26.752] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[    26.752] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[    26.752] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[    26.752] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[    26.752] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[    26.754] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event5)
[    26.754] (**) Acer WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    26.754] (II) Using input driver 'evdev' for 'Acer WMI hotkeys'
[    26.754] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    26.754] (**) Acer WMI hotkeys: always reports core events
[    26.754] (**) evdev: Acer WMI hotkeys: Device: "/dev/input/event5"
[    26.754] (--) evdev: Acer WMI hotkeys: Vendor 0 Product 0
[    26.754] (--) evdev: Acer WMI hotkeys: Found keys
[    26.754] (II) evdev: Acer WMI hotkeys: Configuring as keyboard
[    26.754] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event5"
[    26.754] (II) XINPUT: Adding extended input device "Acer WMI hotkeys" (type: KEYBOARD, id 13)
[    26.754] (**) Option "xkb_rules" "evdev"
[    26.754] (**) Option "xkb_model" "pc105"
[    26.754] (**) Option "xkb_layout" "tr"
[    26.780] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[    27.192] (II) fglrx(0): EDID vendor "LGD", prod id 55297
[    27.193] (II) fglrx(0): Printing DDC gathered Modelines:
[    27.193] (II) fglrx(0): Modeline "1366x768"x0.0   72.30  1366 1414 1446 1526  768 771 776 790 -hsync -vsync (47.4 kHz)
[    31.243] (II) fglrx(0): EDID vendor "LGD", prod id 55297
[    31.243] (II) fglrx(0): Printing DDC gathered Modelines:
[    31.243] (II) fglrx(0): Modeline "1366x768"x0.0   72.30  1366 1414 1446 1526  768 771 776 790 -hsync -vsync (47.4 kHz)
[    48.512] (II) fglrx(0): AC Online
[    53.193] (II) fglrx(0): EDID vendor "LGD", prod id 55297
[    53.193] (II) fglrx(0): Printing DDC gathered Modelines:
[    53.193] (II) fglrx(0): Modeline "1366x768"x0.0   72.30  1366 1414 1446 1526  768 771 776 790 -hsync -vsync (47.4 kHz)
[    53.788] (II) fglrx(0): EDID vendor "LGD", prod id 55297
[    53.788] (II) fglrx(0): Printing DDC gathered Modelines:
[    53.788] (II) fglrx(0): Modeline "1366x768"x0.0   72.30  1366 1414 1446 1526  768 771 776 790 -hsync -vsync (47.4 kHz)
[    54.381] (II) XKB: reuse xkmfile /var/lib/xkb/server-87DDB6A793DBAF5A4545DD8CE8B652AB184C55F8.xkm
[    62.971] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event12)
[    62.972] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[    62.972] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[    62.972] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    62.972] (**) Logitech USB Receiver: always reports core events
[    62.972] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event12"
[    62.972] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc51b
[    62.972] (--) evdev: Logitech USB Receiver: Found 12 mouse buttons
[    62.972] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[    62.972] (--) evdev: Logitech USB Receiver: Found relative axes
[    62.972] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[    62.972] (II) evdev: Logitech USB Receiver: Configuring as mouse
[    62.972] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[    62.972] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[    62.972] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    62.972] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input12/event12"
[    62.972] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 14)
[    62.972] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[    62.972] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[    62.972] (**) Logitech USB Receiver: (accel) acceleration profile 0
[    62.972] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[    62.972] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[    62.973] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse1)
[    62.973] (II) No input driver specified, ignoring this device.
[    62.973] (II) This device may have been added with another device file.
[    74.260] (II) fglrx(0): EDID vendor "LGD", prod id 55297
[    74.260] (II) fglrx(0): Printing DDC gathered Modelines:
[    74.260] (II) fglrx(0): Modeline "1366x768"x0.0   72.30  1366 1414 1446 1526  768 771 776 790 -hsync -vsync (47.4 kHz)


Kod Seç Genişlet

bahdem@bahdem:~$ dmesg | tail -n 40
[   23.347876] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   23.348232] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   23.441129] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input11
[   23.465088] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[   23.465091] vesafb: scrolling: redraw
[   23.465093] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[   23.465102] mtrr: no more MTRRs available
[   23.466010] vesafb: framebuffer at 0xa0000000, mapped to 0xffffc90011a00000, using 4160k, total 4160k
[   23.466406] Console: switching to colour frame buffer device 170x48
[   23.466435] fb0: VESA VGA frame buffer device
[   23.991433] [fglrx] ATIF platform detected with notification ID: 0x81
[   24.200162] tg3 0000:02:00.0: eth0: Link is down
[   24.578402] vboxdrv: Found 4 processor cores.
[   24.578638] vboxdrv: fAsync=0 offMin=0x310 offMax=0x1485
[   24.578707] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   24.578709] vboxdrv: Successfully loaded version 4.1.12_Ubuntu (interface 0x00190000).
[   24.586242] vboxpci: IOMMU not found (not registered)
[   25.111749] fglrx_pci 0000:01:00.0: irq 46 for MSI/MSI-X
[   25.112433] [fglrx] Firegl kernel thread PID: 1365
[   25.112598] [fglrx] Firegl kernel thread PID: 1366
[   25.112760] [fglrx] Firegl kernel thread PID: 1367
[   25.112962] [fglrx] IRQ 46 Enabled
[   25.208669] [fglrx] Gart USWC size:1280 M.
[   25.208672] [fglrx] Gart cacheable size:508 M.
[   25.208677] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[   25.208679] [fglrx] Reserved FB block: Unshared offset:f8fd000, size:403000
[   25.208680] [fglrx] Reserved FB block: Unshared offset:1fff4000, size:c000
[   26.003094] wlan0: authenticate with 74:ea:3a:fd:52:05 (try 1)
[   26.005067] wlan0: authenticated
[   26.005259] wlan0: associate with 74:ea:3a:fd:52:05 (try 1)
[   26.007854] wlan0: RX AssocResp from 74:ea:3a:fd:52:05 (capab=0x431 status=0 aid=6)
[   26.007858] wlan0: associated
[   26.017701] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   36.644263] wlan0: no IPv6 routers present
[   63.060016] usb 2-1.2: new low-speed USB device number 3 using ehci_hcd
[   63.233002] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input12
[   63.233195] generic-usb 0003:046D:C51B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input0
[   63.235483] generic-usb 0003:046D:C51B.0002: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input1
[   63.235503] usbcore: registered new interface driver usbhid
[   63.235505] usbhid: USB HID core driver


[if]

@bahdem, birden bire mi oldu bu durum? Gnome'a girdikten sonra oturumu kapatıp Unity'ye girmeyi dener misiniz?

Kod Seç Genişlet

gsettings set com.canonical.Unity.Panel systray-whitelist "['all']" komutunu uygulayalım.

[zeusmaster]

Aynen bir anda oldu. O komutu bir araştırma yaparken bir konuda görüp uygulamıştım. Ama değişiklik yok

[if]

@bahdem, gnome-shell oturumunda başlangıç uygulamalarında neler var?