Lubuntu Wireless Sorunu

[turuncu]

JMC260 Ethernet kartlı Netbook'ta  Lubuntu 10.04'de internet sorunu yaşıyorum.Birçok forum gezdim ama elimden birşey gelmiyor.
Sağ altta wireless kısmına geldiğimde disconnected diyor ve Ağları görmüyor.Çözümü nedir acaba ?
(Led ışıklarda wifi açık gözüküyor ama bağlanmıyor.)

[heartsmagic]

Kablosuz demişsin ancak "ethernet" kartından bahsetmişsin, kablosuz ağ kartı mı demek istedin?
http://forum.ubuntu-tr.net/index.php?topic=28764.0

[turuncu]

Sanırım dediğiniz gibi.
(JMicron Technology Corp. JMC260 PCI Express Fast Ethernet Controller)

[heartsmagic]

@winkan, o da ethernet kartı. Verdiğim bağlantıda istenen çıktıları lütfen buraya kod etiketi içinde geç.

[turuncu]

Kodları usb içinden yapıştırıp çıktılarıda buraya koyuyorum :

Kod Seç Genişlet

0000)
[    0.000000] ACPI: SLIC 7f5ded86 00176 (v01 BEKOPC ARCELIK1 06040000  LTP 00000000)
[    0.000000] ACPI: MCFG 7f5deefc 0003C (v01 PTLTD    MCFG   06040000  LTP 00000000)
[    0.000000] ACPI: HPET 7f5def38 00038 (v01 PTLTD  HPETTBL  06040000  LTP 00000001)
[    0.000000] ACPI: APIC 7f5def70 00068 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
[    0.000000] ACPI: BOOT 7f5defd8 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
[    0.000000] ACPI: SSDT 7f5e1f67 0025F (v01  PmRef  Cpu0Tst 00003000 INTL 20050624)
[    0.000000] ACPI: SSDT 7f5e21c6 000A6 (v01  PmRef  Cpu3Tst 00003000 INTL 20050624)
[    0.000000] ACPI: SSDT 7f5e226c 000A6 (v01  PmRef  Cpu2Tst 00003000 INTL 20050624)
[    0.000000] ACPI: SSDT 7f5e2312 000A6 (v01  PmRef  Cpu1Tst 00003000 INTL 20050624)
[    0.000000] ACPI: SSDT 7f5e23b8 009B2 (v02  PmRef    CpuPm 00003000 INTL 20050624)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1149MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000]   node 0 low ram: 00000000 - 377fe000
[    0.000000]   node 0 bootmap 00011000 - 00017f00
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 00008d9e98]    TEXT DATA BSS ==> [0000100000 - 00008d9e98]
[    0.000000]   #4 [000009dc00 - 0000100000]    BIOS reserved ==> [000009dc00 - 0000100000]
[    0.000000]   #5 [00008da000 - 00008dd169]              BRK ==> [00008da000 - 00008dd169]
[    0.000000]   #6 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
[    0.000000]   #7 [00008de000 - 00015a31a6]      NEW RAMDISK ==> [00008de000 - 00015a31a6]
[    0.000000]   #8 [0000011000 - 0000018000]          BOOTMAP ==> [0000011000 - 0000018000]
[    0.000000] found SMP MP-table at [c00f7f20] f7f20
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0007f5d0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x0007f5d0
[    0.000000] On node 0 totalpages: 521565
[    0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c15a5200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3949 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2300 pages used for memmap
[    0.000000]   HighMem zone: 292054 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[    0.000000] PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
[    0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @c2800000 s36024 r0 d21320 u2097152
[    0.000000] pcpu-alloc: s36024 r0 d21320 u2097152 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517489
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=108b9a10-5296-421b-a7ec-e0cc69bbcb1b ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] allocated 10433280 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:0007f5d0)
[    0.000000] Memory: 2036568k/2086720k available (4673k kernel code, 48620k reserved, 2122k data, 656k init, 1177416k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc07a3000 - 0xc0847000   ( 656 kB)
[    0.000000]       .data : 0xc0590613 - 0xc07a2e48   (2122 kB)
[    0.000000]       .text : 0xc0100000 - 0xc0590613   (4673 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:2304 nr_irqs:424
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1662.623 MHz processor.
[    0.004008] Calibrating delay loop (skipped), value calculated using timer frequency.. 3325.24 BogoMIPS (lpj=6650492)
[    0.004044] Security Framework initialized
[    0.004085] AppArmor: AppArmor initialized
[    0.004101] Mount-cache hash table entries: 512
[    0.004326] Initializing cgroup subsys ns
[    0.004336] Initializing cgroup subsys cpuacct
[    0.004345] Initializing cgroup subsys memory
[    0.004359] Initializing cgroup subsys devices
[    0.004365] Initializing cgroup subsys freezer
[    0.004370] Initializing cgroup subsys net_cls
[    0.004406] CPU: L1 I cache: 32K, L1 D cache: 24K
[    0.004413] CPU: L2 cache: 512K
[    0.004418] CPU: Physical Processor ID: 0
[    0.004423] CPU: Processor Core ID: 0
[    0.004430] mce: CPU supports 5 MCE banks
[    0.004447] CPU0: Thermal monitoring enabled (TM1)
[    0.004455] using mwait in idle threads.
[    0.004466] Performance Events: Atom events, Intel PMU driver.
[    0.004482] ... version:                3
[    0.004486] ... bit width:              40
[    0.004491] ... generic registers:      2
[    0.004495] ... value mask:             000000ffffffffff
[    0.004500] ... max period:             000000007fffffff
[    0.004505] ... fixed-purpose events:   3
[    0.004510] ... event mask:             0000000700000003
[    0.004519] Checking 'hlt' instruction... OK.
[    0.020008] Disabling 4MB page tables to avoid TLB bug
[    0.024290] ACPI: Core revision 20090903
[    0.044018] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.044029] ftrace: allocating 21771 entries in 43 pages
[    0.048099] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.048506] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.093539] CPU0: Intel(R) Atom(TM) CPU N455   @ 1.66GHz stepping 0a
[    0.096001] Booting processor 1 APIC 0x1 ip 0x6000
[    0.008000] Initializing CPU#1
[    0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K
[    0.008000] CPU: L2 cache: 512K
[    0.008000] CPU: Physical Processor ID: 0
[    0.008000] CPU: Processor Core ID: 0
[    0.008000] CPU1: Thermal monitoring enabled (TM1)
[    0.180134] CPU1: Intel(R) Atom(TM) CPU N455   @ 1.66GHz stepping 0a
[    0.180162] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.184034] Brought up 2 CPUs
[    0.184041] Total of 2 processors activated (6650.16 BogoMIPS).
[    0.184288] CPU0 attaching sched-domain:
[    0.184296]  domain 0: span 0-1 level SIBLING
[    0.184302]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[    0.184314]   domain 1: span 0-1 level MC
[    0.184319]    groups: 0-1 (cpu_power = 1178)
[    0.184331] CPU1 attaching sched-domain:
[    0.184336]  domain 0: span 0-1 level SIBLING
[    0.184341]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[    0.184352]   domain 1: span 0-1 level MC
[    0.184357]    groups: 0-1 (cpu_power = 1178)
[    0.184580] devtmpfs: initialized
[    0.184580] regulator: core version 0.5
[    0.184580] Time: 21:49:00  Date: 01/12/12
[    0.184580] NET: Registered protocol family 16
[    0.184580] Trying to unpack rootfs image as initramfs...
[    0.184580] EISA bus registered
[    0.184580] ACPI: bus type pci registered
[    0.184710] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 20
[    0.184719] PCI: MCFG area at e0000000 reserved in E820
[    0.184725] PCI: Using MMCONFIG for extended config space
[    0.184731] PCI: Using configuration type 1 for base access
[    0.189349] bio: create slab <bio-0> at 0
[    0.191753] ACPI: EC: Look up EC in DSDT
[    0.204507] ACPI: Interpreter enabled
[    0.204507] ACPI: (supports S0 S1 S3 S4 S5)
[    0.204507] ACPI: Using IOAPIC for interrupt routing
[    0.219771] ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62
[    0.220428] ACPI: No dock devices found.
[    0.223312] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[    0.223333] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f70145d0), AE_ALREADY_EXISTS
[    0.223354] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
[    0.223428] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.223620] pci 0000:00:02.0: reg 10 32bit mmio: [0xf0300000-0xf037ffff]
[    0.223632] pci 0000:00:02.0: reg 14 io port: [0x18e8-0x18ef]
[    0.223644] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff]
[    0.223656] pci 0000:00:02.0: reg 1c 32bit mmio: [0xf0000000-0xf00fffff]
[    0.223716] pci 0000:00:02.1: reg 10 32bit mmio: [0xf0380000-0xf03fffff]
[    0.223878] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf0400000-0xf0403fff]
[    0.223965] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.223976] pci 0000:00:1b.0: PME# disabled
[    0.224135] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.224145] pci 0000:00:1c.0: PME# disabled
[    0.224288] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.224300] pci 0000:00:1c.2: PME# disabled
[    0.224400] pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f]
[    0.224496] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f]
[    0.224589] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f]
[    0.224681] pci 0000:00:1d.3: reg 20 io port: [0x1880-0x189f]
[    0.224779] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf0604000-0xf06043ff]
[    0.224866] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.224876] pci 0000:00:1d.7: PME# disabled
[    0.225188] pci 0000:00:1f.2: reg 10 io port: [0x18e0-0x18e7]
[    0.225204] pci 0000:00:1f.2: reg 14 io port: [0x18d4-0x18d7]
[    0.225219] pci 0000:00:1f.2: reg 18 io port: [0x18d8-0x18df]
[    0.225235] pci 0000:00:1f.2: reg 1c io port: [0x18d0-0x18d3]
[    0.225249] pci 0000:00:1f.2: reg 20 io port: [0x18c0-0x18cf]
[    0.225265] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf0604400-0xf06047ff]
[    0.225320] pci 0000:00:1f.2: PME# supported from D3hot
[    0.225330] pci 0000:00:1f.2: PME# disabled
[    0.225408] pci 0000:00:1f.3: reg 20 io port: [0x18a0-0x18bf]
[    0.225534] pci 0000:13:00.0: reg 10 io port: [0x2000-0x20ff]
[    0.225553] pci 0000:13:00.0: reg 14 32bit mmio: [0xf0100000-0xf0103fff]
[    0.225669] pci 0000:13:00.0: supports D1 D2
[    0.225677] pci 0000:13:00.0: PME# supported from D0 D1 D2 D3hot
[    0.225690] pci 0000:13:00.0: PME# disabled
[    0.225801] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff]
[    0.225813] pci 0000:00:1c.0: bridge 32bit mmio: [0xf0100000-0xf01fffff]
[    0.225907] pci 0000:14:00.0: reg 10 32bit mmio: [0xf0204000-0xf02040ff]
[    0.226129] pci 0000:14:00.2: reg 10 32bit mmio: [0xf0204400-0xf02044ff]
[    0.226352] pci 0000:14:00.3: reg 10 32bit mmio: [0xf0204800-0xf02048ff]
[    0.226572] pci 0000:14:00.5: reg 10 32bit mmio: [0xf0200000-0xf0203fff]
[    0.226603] pci 0000:14:00.5: reg 18 io port: [0x3400-0x347f]
[    0.226622] pci 0000:14:00.5: reg 1c io port: [0x3000-0x30ff]
[    0.226721] pci 0000:14:00.5: PME# supported from D0 D3hot D3cold
[    0.226734] pci 0000:14:00.5: PME# disabled
[    0.226844] pci 0000:00:1c.2: bridge io port: [0x3000-0x3fff]
[    0.226855] pci 0000:00:1c.2: bridge 32bit mmio: [0xf0200000-0xf02fffff]
[    0.226948] pci 0000:00:1e.0: transparent bridge
[    0.227000] pci_bus 0000:00: on NUMA node 0
[    0.227022] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.227309] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[    0.227498] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[    0.227705] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    0.228231] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[    0.228250] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f70145d0), AE_ALREADY_EXISTS
[    0.244783] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.245072] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.245346] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.245636] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.245933] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.246221] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.246524] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.246822] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.247131] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.247164] vgaarb: loaded
[    0.247521] SCSI subsystem initialized
[    0.247753] libata version 3.00 loaded.
[    0.247967] usbcore: registered new interface driver usbfs
[    0.248052] usbcore: registered new interface driver hub
[    0.248170] usbcore: registered new device driver usb
[    0.248583] ACPI: WMI: Mapper loaded
[    0.248590] PCI: Using ACPI for IRQ routing
[    0.248972] NetLabel: Initializing
[    0.248979] NetLabel:  domain hash size = 128
[    0.248984] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.249016] NetLabel:  unlabeled traffic allowed by default
[    0.249138] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.249153] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.252108] Switching to clocksource tsc
[    0.256705] AppArmor: AppArmor Filesystem Enabled
[    0.256742] pnp: PnP ACPI init
[    0.256782] ACPI: bus type pnp registered
[    0.263340] pnp: PnP ACPI: found 8 devices
[    0.263349] ACPI: ACPI bus type pnp unregistered
[    0.263359] PnPBIOS: Disabled by ACPI PNP
[    0.263395] system 00:01: ioport range 0x800-0x80f has been reserved
[    0.263405] system 00:01: ioport range 0x1000-0x107f has been reserved
[    0.263414] system 00:01: ioport range 0x1180-0x11bf has been reserved
[    0.263424] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[    0.263435] system 00:01: ioport range 0xfe00-0xfe00 has been reserved
[    0.263446] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[    0.263457] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[    0.263467] system 00:01: iomem range 0xf8000000-0xfbffffff has been reserved
[    0.263477] system 00:01: iomem range 0xfef00000-0xfeffffff has been reserved
[    0.298639] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:13
[    0.298652] pci 0000:00:1c.0:   IO window: 0x2000-0x2fff
[    0.298666] pci 0000:00:1c.0:   MEM window: 0xf0100000-0xf01fffff
[    0.298678] pci 0000:00:1c.0:   PREFETCH window: 0x00000080000000-0x000000801fffff
[    0.298694] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:14
[    0.298703] pci 0000:00:1c.2:   IO window: 0x3000-0x3fff
[    0.298715] pci 0000:00:1c.2:   MEM window: 0xf0200000-0xf02fffff
[    0.298727] pci 0000:00:1c.2:   PREFETCH window: 0x00000080200000-0x000000803fffff
[    0.298742] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15
[    0.298748] pci 0000:00:1e.0:   IO window: disabled
[    0.298760] pci 0000:00:1e.0:   MEM window: disabled
[    0.298769] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.298799] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[    0.298816]   alloc irq_desc for 16 on node -1
[    0.298823]   alloc kstat_irqs on node -1
[    0.298841] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.298855] pci 0000:00:1c.0: setting latency timer to 64
[    0.298875]   alloc irq_desc for 18 on node -1
[    0.298881]   alloc kstat_irqs on node -1
[    0.298934] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.298946] pci 0000:00:1c.2: setting latency timer to 64
[    0.298963] pci 0000:00:1e.0: setting latency timer to 64
[    0.298974] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.298983] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.298991] pci_bus 0000:13: resource 0 io:  [0x2000-0x2fff]
[    0.298999] pci_bus 0000:13: resource 1 mem: [0xf0100000-0xf01fffff]
[    0.299008] pci_bus 0000:13: resource 2 pref mem [0x80000000-0x801fffff]
[    0.299017] pci_bus 0000:14: resource 0 io:  [0x3000-0x3fff]
[    0.299025] pci_bus 0000:14: resource 1 mem: [0xf0200000-0xf02fffff]
[    0.299033] pci_bus 0000:14: resource 2 pref mem [0x80200000-0x803fffff]
[    0.299042] pci_bus 0000:15: resource 3 io:  [0x00-0xffff]
[    0.299050] pci_bus 0000:15: resource 4 mem: [0x000000-0xffffffff]
[    0.299148] NET: Registered protocol family 2
[    0.299413] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.300283] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.301417] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.301957] TCP: Hash tables configured (established 131072 bind 65536)
[    0.301966] TCP reno registered
[    0.302217] NET: Registered protocol family 1
[    0.302268] pci 0000:00:02.0: Boot video device
[    0.302498] Simple Boot Flag at 0x36 set to 0x1
[    0.303024] cpufreq-nforce2: No nForce2 chipset.
[    0.303100] Scanning for low memory corruption every 60 seconds
[    0.303403] audit: initializing netlink socket (disabled)
[    0.303430] type=2000 audit(1326404939.302:1): initialized
[    0.324067] highmem bounce pool size: 64 pages
[    0.324084] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.328981] VFS: Disk quotas dquot_6.5.2
[    0.329173] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.331153] fuse init (API version 7.13)
[    0.331424] msgmni has been set to 1680
[    0.332074] alg: No test for stdrng (krng)
[    0.332261] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.332270] io scheduler noop registered
[    0.332276] io scheduler anticipatory registered
[    0.332282] io scheduler deadline registered
[    0.332410] io scheduler cfq registered (default)
[    0.332752]   alloc irq_desc for 24 on node -1
[    0.332760]   alloc kstat_irqs on node -1
[    0.332783] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[    0.332803] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.333070]   alloc irq_desc for 25 on node -1
[    0.333077]   alloc kstat_irqs on node -1
[    0.333094] pcieport 0000:00:1c.2: irq 25 for MSI/MSI-X
[    0.333112] pcieport 0000:00:1c.2: setting latency timer to 64
[    0.333348] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.333621] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[    0.333641] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f70145d0), AE_ALREADY_EXISTS
[    0.333970] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[    0.333988] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f70145d0), AE_ALREADY_EXISTS
[    0.334364] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[    0.334384] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f70145d0), AE_ALREADY_EXISTS
[    0.334702] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[    0.334720] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f70145d0), AE_ALREADY_EXISTS
[    0.334840] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.336249] ACPI Error (psargs-0359): [\_PR_.CPU0._PPC] Namespace lookup failure, AE_NOT_FOUND
[    0.336269] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.ADP0.ADJP] (Node f7014318), AE_NOT_FOUND
[    0.336338] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.ADP0._PSR] (Node f70142e8), AE_NOT_FOUND
[    0.336416] ACPI Exception: AE_NOT_FOUND, Error reading AC Adapter state (20090903/ac-140)
[    0.336642] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.336657] ACPI: Power Button [PWRB]
[    0.336791] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    0.338061] ACPI: Lid Switch [LID0]
[    0.338220] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    0.338235] ACPI: Sleep Button [SLPB]
[    0.338392] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.338401] ACPI: Power Button [PWRF]
[    0.340076] ACPI: SSDT 7f5e15f0 00203 (v02  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.341384] ACPI: SSDT 7f5e1982 005E5 (v02  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.347874] Monitor-Mwait will be used to enter C-1 state
[    0.347982] Monitor-Mwait will be used to enter C-2 state
[    0.348068] Monitor-Mwait will be used to enter C-3 state
[    0.348089] Marking TSC unstable due to TSC halts in idle
[    0.348243] processor LNXCPU:00: registered as cooling_device0
[    0.349388] ACPI: SSDT 7f5e151c 000D4 (v02  PmRef  Cpu1Ist 00003000 INTL 20050624)
[    0.350354] ACPI: SSDT 7f5e18fd 00085 (v02  PmRef  Cpu1Cst 00003000 INTL 20050624)
[    0.351779] Switching to clocksource hpet
[    0.357418] processor LNXCPU:01: registered as cooling_device1
[    0.370427] thermal LNXTHERM:01: registered as thermal_zone0
[    0.370454] ACPI: Thermal Zone [TZ0] (39 C)
[    0.375249] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.379236] brd: module loaded
[    0.380790] loop: module loaded
[    0.381056] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[    0.382333] Fixed MDIO Bus: probed
[    0.382441] PPP generic driver version 2.4.2
[    0.382572] tun: Universal TUN/TAP device driver, 1.6
[    0.382579] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.382830] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.382888]   alloc irq_desc for 23 on node -1
[    0.382895]   alloc kstat_irqs on node -1
[    0.382911] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.382949] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.382958] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.383067] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.383111] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    0.383132] ehci_hcd 0000:00:1d.7: debug port 1
[    0.385633] ACPI: Battery Slot [BAT0] (battery absent)
[    0.385678] isapnp: Scanning for PnP cards...
[    0.387025] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.387086] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0604000
[    0.404295] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.404589] usb usb1: configuration #1 chosen from 1 choice
[    0.404672] hub 1-0:1.0: USB hub found
[    0.404698] hub 1-0:1.0: 8 ports detected
[    0.404860] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.404905] uhci_hcd: USB Universal Host Controller Interface driver
[    0.404985] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.405001] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.405011] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.405124] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.405168] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[    0.405420] usb usb2: configuration #1 chosen from 1 choice
[    0.405497] hub 2-0:1.0: USB hub found
[    0.405515] hub 2-0:1.0: 2 ports detected
[    0.405631]   alloc irq_desc for 19 on node -1
[    0.405638]   alloc kstat_irqs on node -1
[    0.405653] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.405666] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.405675] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.405763] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.405817] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[    0.406059] usb usb3: configuration #1 chosen from 1 choice
[    0.406136] hub 3-0:1.0: USB hub found
[    0.406154] hub 3-0:1.0: 2 ports detected
[    0.406265] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.406279] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.406287] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.406371] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.406423] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[    0.406660] usb usb4: configuration #1 chosen from 1 choice
[    0.406733] hub 4-0:1.0: USB hub found
[    0.406752] hub 4-0:1.0: 2 ports detected
[    0.406860] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    0.406875] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.406884] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.406967] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.407019] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[    0.407248] usb usb5: configuration #1 chosen from 1 choice
[    0.407327] hub 5-0:1.0: USB hub found
[    0.407344] hub 5-0:1.0: 2 ports detected
[    0.407560] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:SENM] at 0x60,0x64 irq 1,12
[    0.413065] i8042.c: Detected active multiplexing controller, rev 1.1.
[    0.422790] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.422816] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.422911] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.422987] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.423056] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.423417] mice: PS/2 mouse device common for all mice
[    0.423922] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.423970] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.432704] device-mapper: uevent: version 1.0.3
[    0.435363] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.444852] device-mapper: multipath: version 1.1.0 loaded
[    0.444862] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.452505] EISA: Probing bus 0 at eisa.0
[    0.452518] Cannot allocate resource for EISA slot 1
[    0.452526] Cannot allocate resource for EISA slot 2
[    0.452532] Cannot allocate resource for EISA slot 3
[    0.452561] EISA: Detected 0 cards.
[    0.460576] cpuidle: using governor ladder
[    0.460878] cpuidle: using governor menu
[    0.462111] TCP cubic registered
[    0.462578] NET: Registered protocol family 10
[    0.463778] lo: Disabled Privacy Extensions
[    0.464683] NET: Registered protocol family 17
[    0.465826] Using IPI No-Shortcut mode
[    0.466067] PM: Resume from disk failed.
[    0.466095] registered taskstats version 1
[    0.466807]   Magic number: 12:884:853
[    0.466943] rtc_cmos 00:04: setting system clock to 2012-01-12 21:49:00 UTC (1326404940)
[    0.466952] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.466957] EDD information not available.
[    0.498969] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[    0.716585] usb 1-2: new high speed USB device using ehci_hcd and address 2
[    0.739971] isapnp: No Plug & Play device found
[    0.878656] usb 1-2: configuration #1 chosen from 1 choice
[    0.914705] Freeing initrd memory: 13076k freed
[    0.925515] Freeing unused kernel memory: 656k freed
[    0.926193] Write protecting the kernel text: 4676k
[    0.926266] Write protecting the kernel read-only data: 1840k
[    0.966204] udev: starting version 151
[    1.232536] Linux agpgart interface v0.103
[    1.273673] ahci 0000:00:1f.2: version 3.0
[    1.273712] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.273798]   alloc irq_desc for 26 on node -1
[    1.273805]   alloc kstat_irqs on node -1
[    1.273828] ahci 0000:00:1f.2: irq 26 for MSI/MSI-X
[    1.273898] ahci: SSS flag set, parallel bus scan disabled
[    1.273957] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    1.273970] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part
[    1.273983] ahci 0000:00:1f.2: setting latency timer to 64
[    1.274340] scsi0 : ahci
[    1.275295] Initializing USB Mass Storage driver...
[    1.275584] scsi2 : SCSI emulation for USB Mass Storage devices
[    1.275820] usbcore: registered new interface driver usb-storage
[    1.275829] USB Mass Storage support registered.
[    1.285024] usb-storage: device found at 2
[    1.285031] usb-storage: waiting for device to settle before scanning
[    1.296282] scsi1 : ahci
[    1.296675] scsi3 : ahci
[    1.297044] scsi4 : ahci
[    1.297458] ata1: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604500 irq 26
[    1.297469] ata2: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604580 irq 26
[    1.297477] ata3: DUMMY
[    1.297482] ata4: DUMMY
[    1.298242] agpgart-intel 0000:00:00.0: Intel IGD Chipset
[    1.298622] agpgart-intel 0000:00:00.0: detected 8188K stolen memory
[    1.312539] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    1.354876] [drm] Initialized drm 1.1.0 20060810
[    1.620138] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.648312] ata1.00: ATA-8: TOSHIBA MK2565GSX, GJ003A, max UDMA/100
[    1.648325] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.649352] ata1.00: configured for UDMA/100
[    1.664360] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK2565GS GJ00 PQ: 0 ANSI: 5
[    1.664687] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.665334] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    1.665472] sd 0:0:0:0: [sda] Write Protect is off
[    1.665479] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.665550] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.665934]  sda: sda1 sda2 < sda5 >
[    1.740778] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.984139] ata2: SATA link down (SStatus 0 SControl 300)
[    2.068325] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.068336] i915 0000:00:02.0: setting latency timer to 64
[    2.078098]   alloc irq_desc for 27 on node -1
[    2.078105]   alloc kstat_irqs on node -1
[    2.078119] i915 0000:00:02.0: irq 27 for MSI/MSI-X
[    2.078130] [drm] set up 7M of stolen space
[    2.181995] [drm] initialized overlay support
[    2.682800] fb0: inteldrmfb frame buffer device
[    2.682807] registered panic notifier
[    2.691341] acpi device:01: registered as cooling_device2
[    2.691844] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    2.691992] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.692090] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    2.698147] vga16fb: initializing
[    2.698157] vga16fb: mapped to 0xc00a0000
[    2.698167] vga16fb: not registering due to another framebuffer present
[    2.714382] [drm] Big FIFO is enabled
[    2.784149] [drm] Big FIFO is enabled
[    2.784170] [drm] Big FIFO is enabled
[    3.614706] [drm] Big FIFO is enabled
[    3.644350] Console: switching to colour frame buffer device 128x37
[    3.926370] [drm] Big FIFO is enabled
[    3.948328] [drm] Big FIFO is enabled
[    4.294097] xor: automatically using best checksumming function: pIII_sse
[    4.313024]    pIII_sse  :  4930.000 MB/sec
[    4.313033] xor: using function: pIII_sse (4930.000 MB/sec)
[    4.320178] device-mapper: dm-raid45: initialized v0.2594b
[    4.686774] EXT4-fs (sda1): mounted filesystem with ordered data mode
[    6.285423] usb-storage: device scan complete
[    6.464650] scsi 2:0:0:0: Direct-Access     Sony     Storage Media    0100 PQ: 0 ANSI: 0 CCS
[    6.465714] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    6.466455] sd 2:0:0:0: [sdb] 7907328 512-byte logical blocks: (4.04 GB/3.77 GiB)
[    6.467220] sd 2:0:0:0: [sdb] Write Protect is off
[    6.467232] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
[    6.467241] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[    6.469972] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[    6.469987]  sdb: sdb1
[    6.472465] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[    6.472480] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[    6.516477] Adding 6007800k swap on /dev/sda5.  Priority:-1 extents:1 across:6007800k
[    6.585546] udev: starting version 151
[    7.427051] sdhci: Secure Digital Host Controller Interface driver
[    7.427061] sdhci: Copyright(c) Pierre Ossman
[    7.461643] sdhci-pci 0000:14:00.0: SDHCI controller found [197b:2382] (rev 80)
[    7.461680] sdhci-pci 0000:14:00.0: enabling device (0104 -> 0106)
[    7.461700] sdhci-pci 0000:14:00.0: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    7.461788] sdhci-pci 0000:14:00.0: setting latency timer to 64
[    7.462885] Registered led device: mmc0::
[    7.463901] mmc0: SDHCI controller on PCI [0000:14:00.0] using ADMA
[    7.463968] sdhci-pci 0000:14:00.2: SDHCI controller found [197b:2381] (rev 80)
[    7.463999] sdhci-pci 0000:14:00.2: enabling device (0104 -> 0106)
[    7.464017] sdhci-pci 0000:14:00.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    7.464036] sdhci-pci 0000:14:00.2: Refusing to bind to secondary interface.
[    7.464052] sdhci-pci 0000:14:00.2: PCI INT B disabled
[    7.474365] jmb38x_ms 0000:14:00.3: enabling device (0104 -> 0106)
[    7.474386] jmb38x_ms 0000:14:00.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    7.474402] jmb38x_ms 0000:14:00.3: setting latency timer to 64
[    7.486768] jme: JMicron JMC2XX ethernet driver version 1.0.5
[    7.486852] jme 0000:14:00.5: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    7.488279] jme 0000:14:00.5: setting latency timer to 64
[    7.491371] eth0: JMC260 Fast Ethernet ver:22 rev:2 macaddr:00:90:f5:b8:8f:bd
[    7.862509] type=1505 audit(1326404947.894:2):  operation="profile_load" pid=591 name="/sbin/dhclient3"
[    7.863027] type=1505 audit(1326404947.894:3):  operation="profile_load" pid=591 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[    7.863319] type=1505 audit(1326404947.894:4):  operation="profile_load" pid=591 name="/usr/lib/connman/scripts/dhclient-script"
[    8.089190] rtllib_crypt: registered algorithm 'NULL'
[    8.089200] rtllib_crypt: registered algorithm 'TKIP'
[    8.089207] rtllib_crypt: registered algorithm 'CCMP'
[    8.089705] rtllib_crypt: registered algorithm 'WEP'
[    8.089713]
[    8.089716] Linux kernel driver for RTL8192 based WLAN cards
[    8.089721] Copyright (c) 2007-2008, Realsil Wlan Driver
[    8.089808] rtl819xSE 0000:13:00.0: enabling device (0104 -> 0107)
[    8.089826] rtl819xSE 0000:13:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    8.089841] rtl819xSE 0000:13:00.0: setting latency timer to 64
[    8.090182] Adapter(8192SE) is found - DeviceID=8172
[    8.098766] lp: driver loaded but no devices found
[    8.196706] psmouse serio2: ID: 10 00 64
[    8.421659] type=1505 audit(1326404948.454:5):  operation="profile_load" pid=631 name="/usr/sbin/ntpd"
[   10.433395] Finger Sensing Pad, hw: 13.2.1, sw: 1.0.0-K, buttons: 4
[   10.812721] HDA Intel 0000:00:1b.0: enabling device (0104 -> 0106)
[   10.812738]   alloc irq_desc for 22 on node -1
[   10.812745]   alloc kstat_irqs on node -1
[   10.812760] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   10.812829] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   11.110851] hda_codec: ALC272: BIOS auto-probing.
[   11.112163] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[   11.261263] [drm] Big FIFO is enabled
[   11.485125] type=1505 audit(1326404951.517:6):  operation="profile_replace" pid=794 name="/sbin/dhclient3"
[   11.485657] type=1505 audit(1326404951.517:7):  operation="profile_replace" pid=794 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   11.485959] type=1505 audit(1326404951.517:8):  operation="profile_replace" pid=794 name="/usr/lib/connman/scripts/dhclient-script"
[   11.520257] type=1505 audit(1326404951.553:9):  operation="profile_load" pid=795 name="/usr/lib/cups/backend/cups-pdf"
[   11.520935] type=1505 audit(1326404951.553:10):  operation="profile_load" pid=795 name="/usr/sbin/cupsd"
[   11.525130] type=1505 audit(1326404951.557:11):  operation="profile_replace" pid=796 name="/usr/sbin/ntpd"
[   14.580467] rtl819xSE 0000:13:00.0: firmware: requesting RTL8192SE/rtl8192sfw.bin
[   14.655691] input: FSPPS/2 Sentelic FingerSensingPad as /devices/platform/i8042/serio2/input/input8
[   15.099056] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[   15.108852] ===>rtllib_start_scan()
[   15.109539] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   15.116650]   alloc irq_desc for 28 on node -1
[   15.116658]   alloc kstat_irqs on node -1
[   15.116685] jme 0000:14:00.5: irq 28 for MSI/MSI-X
[   15.117064] eth0: Link is down.
[   15.117428] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.472719] ppdev: user-space parallel port driver
[   16.148819] [drm] Big FIFO is enabled
[   22.105068] ----------->rtl8192se_check_hw_scan()
[   22.105077] FW Scan long time without stop, stop hw scan
[   22.106096] <-----------rtl8192se_check_hw_scan()
[   29.172122] ----------->rtl8192se_check_hw_scan()
[   29.172133] FW Scan long time without stop, stop hw scan
[   29.173144] <-----------rtl8192se_check_hw_scan()
[   42.086158] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[   45.054638] CPU0 attaching NULL sched-domain.
[   45.054654] CPU1 attaching NULL sched-domain.
[   45.080135] CPU0 attaching sched-domain:
[   45.080144]  domain 0: span 0-1 level SIBLING
[   45.080150]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[   45.080162]   domain 1: span 0-1 level MC
[   45.080168]    groups: 0-1 (cpu_power = 1178)
[   45.080179] CPU1 attaching sched-domain:
[   45.080183]  domain 0: span 0-1 level SIBLING
[   45.080188]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[   45.080199]   domain 1: span 0-1 level MC
[   45.080204]    groups: 0-1 (cpu_power = 1178)
[   49.092159] ----------->rtl8192se_check_hw_scan()
[   49.092171] FW Scan long time without stop, stop hw scan
[   49.093185] <-----------rtl8192se_check_hw_scan()
[   72.086791] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[   79.096044] ----------->rtl8192se_check_hw_scan()
[   79.096052] FW Scan long time without stop, stop hw scan
[   79.097064] <-----------rtl8192se_check_hw_scan()
[  112.087049] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[  119.096088] ----------->rtl8192se_check_hw_scan()
[  119.096099] FW Scan long time without stop, stop hw scan
[  119.097116] <-----------rtl8192se_check_hw_scan()
[  134.196572] GPIOChangeRF  - HW Radio OFF
[  161.972139] ================>r8192_wx_set_scan(): hwradio off
[  221.971932] ================>r8192_wx_set_scan(): hwradio off
[  281.971381] ================>r8192_wx_set_scan(): hwradio off
[  314.419512] ================>r8192_wx_set_scan(): hwradio off
[  335.806768] ================>r8192_wx_set_scan(): hwradio off
[  341.971623] ================>r8192_wx_set_scan(): hwradio off
[  401.972097] ================>r8192_wx_set_scan(): hwradio off
[  461.971877] ================>r8192_wx_set_scan(): hwradio off
[  521.972253] ================>r8192_wx_set_scan(): hwradio off
[  556.196643] GPIOChangeRF  - HW Radio ON, RF ON
[  582.088883] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[  589.096077] ----------->rtl8192se_check_hw_scan()
[  589.096088] FW Scan long time without stop, stop hw scan
[  589.097105] <-----------rtl8192se_check_hw_scan()
[  642.089673] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[  649.096091] ----------->rtl8192se_check_hw_scan()
[  649.096102] FW Scan long time without stop, stop hw scan
[  649.097118] <-----------rtl8192se_check_hw_scan()
[  702.089809] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[  709.096102] ----------->rtl8192se_check_hw_scan()
[  709.096114] FW Scan long time without stop, stop hw scan
[  709.097132] <-----------rtl8192se_check_hw_scan()
[  762.087196] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[  769.096157] ----------->rtl8192se_check_hw_scan()
[  769.096169] FW Scan long time without stop, stop hw scan
[  769.097185] <-----------rtl8192se_check_hw_scan()
[  822.089085] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[  829.096091] ----------->rtl8192se_check_hw_scan()
[  829.096103] FW Scan long time without stop, stop hw scan
[  829.097122] <-----------rtl8192se_check_hw_scan()
[  882.088753] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[  889.096072] ----------->rtl8192se_check_hw_scan()
[  889.096083] FW Scan long time without stop, stop hw scan
[  889.097098] <-----------rtl8192se_check_hw_scan()
[  942.089401] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[  949.096111] ----------->rtl8192se_check_hw_scan()
[  949.096122] FW Scan long time without stop, stop hw scan
[  949.097138] <-----------rtl8192se_check_hw_scan()
[ 1002.089003] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 1009.096082] ----------->rtl8192se_check_hw_scan()
[ 1009.096092] FW Scan long time without stop, stop hw scan
[ 1009.097110] <-----------rtl8192se_check_hw_scan()
[ 1062.088534] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 1069.096083] ----------->rtl8192se_check_hw_scan()
[ 1069.096094] FW Scan long time without stop, stop hw scan
[ 1069.097110] <-----------rtl8192se_check_hw_scan()
[ 1122.088946] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 1129.096119] ----------->rtl8192se_check_hw_scan()
[ 1129.096130] FW Scan long time without stop, stop hw scan
[ 1129.097147] <-----------rtl8192se_check_hw_scan()
[ 1182.088725] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 1189.096111] ----------->rtl8192se_check_hw_scan()
[ 1189.096123] FW Scan long time without stop, stop hw scan
[ 1189.097140] <-----------rtl8192se_check_hw_scan()
[ 1242.088351] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 1249.096085] ----------->rtl8192se_check_hw_scan()
[ 1249.096096] FW Scan long time without stop, stop hw scan
[ 1249.097111] <-----------rtl8192se_check_hw_scan()
[ 1302.089155] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 1309.096161] ----------->rtl8192se_check_hw_scan()
[ 1309.096172] FW Scan long time without stop, stop hw scan
[ 1309.097189] <-----------rtl8192se_check_hw_scan()
[ 1362.089482] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 1369.096083] ----------->rtl8192se_check_hw_scan()
[ 1369.096094] FW Scan long time without stop, stop hw scan
[ 1369.097109] <-----------rtl8192se_check_hw_scan()
[ 1422.089730] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 1429.096083] ----------->rtl8192se_check_hw_scan()
[ 1429.096094] FW Scan long time without stop, stop hw scan
[ 1429.097111] <-----------rtl8192se_check_hw_scan()
[ 1482.088337] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 1489.096090] ----------->rtl8192se_check_hw_scan()
[ 1489.096101] FW Scan long time without stop, stop hw scan
[ 1489.097118] <-----------rtl8192se_check_hw_scan()
[ 1542.089820] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 1549.096102] ----------->rtl8192se_check_hw_scan()
[ 1549.096113] FW Scan long time without stop, stop hw scan
[ 1549.097130] <-----------rtl8192se_check_hw_scan()
[ 1602.088422] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 1609.096154] ----------->rtl8192se_check_hw_scan()
[ 1609.096166] FW Scan long time without stop, stop hw scan
[ 1609.097183] <-----------rtl8192se_check_hw_scan()
[ 1662.088702] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 1669.096085] ----------->rtl8192se_check_hw_scan()
[ 1669.096096] FW Scan long time without stop, stop hw scan
[ 1669.097112] <-----------rtl8192se_check_hw_scan()
[ 1722.089128] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 1729.096077] ----------->rtl8192se_check_hw_scan()
[ 1729.096089] FW Scan long time without stop, stop hw scan
[ 1729.097104] <-----------rtl8192se_check_hw_scan()
[ 1782.088056] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 1789.096084] ----------->rtl8192se_check_hw_scan()
[ 1789.096095] FW Scan long time without stop, stop hw scan
[ 1789.097111] <-----------rtl8192se_check_hw_scan()
[ 1842.089467] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 1849.096109] ----------->rtl8192se_check_hw_scan()
[ 1849.096120] FW Scan long time without stop, stop hw scan
[ 1849.097137] <-----------rtl8192se_check_hw_scan()
[ 1902.089914] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 1909.096152] ----------->rtl8192se_check_hw_scan()
[ 1909.096163] FW Scan long time without stop, stop hw scan
[ 1909.097179] <-----------rtl8192se_check_hw_scan()
[ 1962.089162] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 1969.096090] ----------->rtl8192se_check_hw_scan()
[ 1969.096101] FW Scan long time without stop, stop hw scan
[ 1969.097117] <-----------rtl8192se_check_hw_scan()
[ 2022.089291] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 2029.096113] ----------->rtl8192se_check_hw_scan()
[ 2029.096124] FW Scan long time without stop, stop hw scan
[ 2029.097142] <-----------rtl8192se_check_hw_scan()
[ 2082.089064] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 2089.096085] ----------->rtl8192se_check_hw_scan()
[ 2089.096096] FW Scan long time without stop, stop hw scan
[ 2089.097113] <-----------rtl8192se_check_hw_scan()
[ 2142.088797] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 2149.096138] ----------->rtl8192se_check_hw_scan()
[ 2149.096148] FW Scan long time without stop, stop hw scan
[ 2149.097165] <-----------rtl8192se_check_hw_scan()
[ 2202.088941] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 2209.096083] ----------->rtl8192se_check_hw_scan()
[ 2209.096094] FW Scan long time without stop, stop hw scan
[ 2209.097112] <-----------rtl8192se_check_hw_scan()
[ 2262.088414] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 2269.096092] ----------->rtl8192se_check_hw_scan()
[ 2269.096103] FW Scan long time without stop, stop hw scan
[ 2269.097119] <-----------rtl8192se_check_hw_scan()
[ 2322.089137] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 2329.096095] ----------->rtl8192se_check_hw_scan()
[ 2329.096106] FW Scan long time without stop, stop hw scan
[ 2329.097123] <-----------rtl8192se_check_hw_scan()
[ 2382.089388] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 2389.096114] ----------->rtl8192se_check_hw_scan()
[ 2389.096125] FW Scan long time without stop, stop hw scan
[ 2389.097141] <-----------rtl8192se_check_hw_scan()
[ 2442.088464] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 2449.096166] ----------->rtl8192se_check_hw_scan()
[ 2449.096177] FW Scan long time without stop, stop hw scan
[ 2449.097194] <-----------rtl8192se_check_hw_scan()
[ 2502.089206] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 2509.096061] ----------->rtl8192se_check_hw_scan()
[ 2509.096072] FW Scan long time without stop, stop hw scan
[ 2509.097090] <-----------rtl8192se_check_hw_scan()
[ 2562.089482] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 2569.096097] ----------->rtl8192se_check_hw_scan()
[ 2569.096109] FW Scan long time without stop, stop hw scan
[ 2569.097125] <-----------rtl8192se_check_hw_scan()
[ 2622.088373] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 2629.096141] ----------->rtl8192se_check_hw_scan()
[ 2629.096152] FW Scan long time without stop, stop hw scan
[ 2629.097169] <-----------rtl8192se_check_hw_scan()
[ 2682.088594] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 2689.096113] ----------->rtl8192se_check_hw_scan()
[ 2689.096126] FW Scan long time without stop, stop hw scan
[ 2689.097146] <-----------rtl8192se_check_hw_scan()
[ 2742.088763] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 2749.096145] ----------->rtl8192se_check_hw_scan()
[ 2749.096156] FW Scan long time without stop, stop hw scan
[ 2749.097173] <-----------rtl8192se_check_hw_scan()
[ 2802.089289] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 2809.096090] ----------->rtl8192se_check_hw_scan()
[ 2809.096102] FW Scan long time without stop, stop hw scan
[ 2809.097118] <-----------rtl8192se_check_hw_scan()
[ 2862.088740] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 2869.096084] ----------->rtl8192se_check_hw_scan()
[ 2869.096096] FW Scan long time without stop, stop hw scan
[ 2869.097112] <-----------rtl8192se_check_hw_scan()
[ 2922.087618] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 2929.096145] ----------->rtl8192se_check_hw_scan()
[ 2929.096156] FW Scan long time without stop, stop hw scan
[ 2929.097173] <-----------rtl8192se_check_hw_scan()
[ 2982.088693] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 2989.096090] ----------->rtl8192se_check_hw_scan()
[ 2989.096101] FW Scan long time without stop, stop hw scan
[ 2989.097118] <-----------rtl8192se_check_hw_scan()
[ 3042.087882] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 3049.096099] ----------->rtl8192se_check_hw_scan()
[ 3049.096110] FW Scan long time without stop, stop hw scan
[ 3049.097127] <-----------rtl8192se_check_hw_scan()
[ 3102.088984] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 3109.096149] ----------->rtl8192se_check_hw_scan()
[ 3109.096160] FW Scan long time without stop, stop hw scan
[ 3109.097176] <-----------rtl8192se_check_hw_scan()
[ 3153.930078] usb 1-2: USB disconnect, address 2
[ 3162.089165] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 3169.096113] ----------->rtl8192se_check_hw_scan()
[ 3169.096124] FW Scan long time without stop, stop hw scan
[ 3169.097141] <-----------rtl8192se_check_hw_scan()
[ 3222.088919] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 3229.096123] ----------->rtl8192se_check_hw_scan()
[ 3229.096134] FW Scan long time without stop, stop hw scan
[ 3229.097150] <-----------rtl8192se_check_hw_scan()
[ 3282.088896] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 3289.096102] ----------->rtl8192se_check_hw_scan()
[ 3289.096113] FW Scan long time without stop, stop hw scan
[ 3289.097130] <-----------rtl8192se_check_hw_scan()
[ 3308.968157] usb 1-2: new high speed USB device using ehci_hcd and address 3
[ 3309.126880] usb 1-2: configuration #1 chosen from 1 choice
[ 3309.127782] scsi5 : SCSI emulation for USB Mass Storage devices
[ 3309.128651] usb-storage: device found at 3
[ 3309.128664] usb-storage: waiting for device to settle before scanning
[ 3313.994024] usb 1-2: USB disconnect, address 3
[ 3342.089158] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 3349.096139] ----------->rtl8192se_check_hw_scan()
[ 3349.096150] FW Scan long time without stop, stop hw scan
[ 3349.097166] <-----------rtl8192se_check_hw_scan()
[ 3355.816152] usb 1-2: new high speed USB device using ehci_hcd and address 4
[ 3355.962775] usb 1-2: configuration #1 chosen from 1 choice
[ 3355.963667] scsi6 : SCSI emulation for USB Mass Storage devices
[ 3355.964541] usb-storage: device found at 4
[ 3355.964553] usb-storage: waiting for device to settle before scanning
[ 3360.964524] usb-storage: device scan complete
[ 3361.144244] scsi 6:0:0:0: Direct-Access     Sony     Storage Media    0100 PQ: 0 ANSI: 0 CCS
[ 3361.155790] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 3361.161941] sd 6:0:0:0: [sdb] 7907328 512-byte logical blocks: (4.04 GB/3.77 GiB)
[ 3361.162669] sd 6:0:0:0: [sdb] Write Protect is off
[ 3361.162687] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 3361.162700] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3361.168300] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3361.168323]  sdb: sdb1
[ 3361.172561] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3361.172577] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 3402.087681] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 3409.096128] ----------->rtl8192se_check_hw_scan()
[ 3409.096136] FW Scan long time without stop, stop hw scan
[ 3409.097144] <-----------rtl8192se_check_hw_scan()
[ 3462.088562] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 3469.096088] ----------->rtl8192se_check_hw_scan()
[ 3469.096099] FW Scan long time without stop, stop hw scan
[ 3469.097116] <-----------rtl8192se_check_hw_scan()
winkan@winkan:~$ dmesg | tail
[ 3361.172561] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3361.172577] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 3402.087681] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 3409.096128] ----------->rtl8192se_check_hw_scan()
[ 3409.096136] FW Scan long time without stop, stop hw scan
[ 3409.097144] <-----------rtl8192se_check_hw_scan()
[ 3462.088562] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 3469.096088] ----------->rtl8192se_check_hw_scan()
[ 3469.096099] FW Scan long time without stop, stop hw scan
[ 3469.097116] <-----------rtl8192se_check_hw_scan()


[if]

@winkan,

Kod Seç Genişlet

sudo modprobe -r rtl8192se
sudo modprobe rtl8192se komutlarından sonra değişme var mı?

[turuncu]

@if
Çıktıları:

Kod Seç Genişlet

FATAL: Module rtl8192se not found.

şeklinde.

[heartsmagic]

@winkan, tüm çıktıları geçmemişsin ama buraya.

[turuncu]

Çıktıları koyabileceğim yöntem yok sanırım.
3 yıl önce pardusa geçmiştim. Düzelmeyen wireless sorunu yüzünden.
An itibari ile pes ederek windowsa geri döndüm.Yardımlar için teşekkürler.

[ironic]

Pardus tarafında ne tür sorunlarla karşılaşıldı bilmiyorum ama bu sorun biraz zahmetle çözülebilecek bir sorundu. Kartın linux sürücüsü de mevcutmuş. 

Kararı vermişsiniz ama bunu da not düşmek istedim.

[turuncu]

@ironic
Kartın linux sürücüsü mevcut ama kurmak için binbir takla atmak lazım.En azından acemi bir linux kullanıcısı için.İlerde Meego kurmak istiyorum.Bir dahaki linux maceramda görüşmek üzere.