MSI U160DX Netbook wireless bağlanma sorunu

[BurakArısoy]

Bugün Ubuntu netbook edition kurdum ancak wireless sorunu mevcut yardım edebilirseniz teşekkür ederim


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 27 Aralık 2011 - 20:38:32
lspci:

Kod Seç Genişlet

root@ubuntu:/home/burak# lspci
00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge (rev 02)
00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller (rev 02)
00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller (rev 02)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 4 (rev 02)
00:1d.0 USB Controller: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation N10/ICH7 Family SATA AHCI Controller (rev 02)
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02)
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
03:00.0 Network controller: RaLink RT3090 Wireless 802.11n 1T/1R PCIe



Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 27 Aralık 2011 - 20:40:44
lsusb:

Kod Seç Genişlet

Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 046d:c526 Logitech, Inc. MX Revolution Cordless Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 13d3:5070 IMC Networks
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub



Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 27 Aralık 2011, 20:49:42
ifconfig:

Kod Seç Genişlet

eth0      Link encap:Ethernet  HWaddr 6c:62:6d:30:4f:2d 
          inet addr:192.168.2.136  Bcast:192.168.2.255  Mask:255.255.255.0
          inet6 addr: fe80::6e62:6dff:fe30:4f2d/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:2698 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2441 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:2783042 (2.7 MB)  TX bytes:441707 (441.7 KB)
          Interrupt:28

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Sunucu
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:16 errors:0 dropped:0 overruns:0 frame:0
          TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:1072 (1.0 KB)  TX bytes:1072 (1.0 KB)

iwconfig:

Kod Seç Genişlet

lo        no wireless extensions.

eth0      no wireless extensions.

wlan0     RT2860 Wireless  ESSID:""  Nickname:"RT2860STA"
          Mode:Auto  Frequency=2.412 GHz  Access Point: Not-Associated   
          Bit Rate:1 Mb/s   
          RTS thr:off   Fragment thr:off
          Encryption key:off
          Link Quality=10/100  Signal level:0 dBm  Noise level:-87 dBm
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

iwlist scanning:

Kod Seç Genişlet

lo        Interface doesn't support scanning.

eth0      Interface doesn't support scanning.

wlan0     No scan results

lsmod:

Kod Seç Genişlet

Module                  Size  Used by
binfmt_misc             6587  1
ppdev                   5259  0
snd_hda_codec_realtek   203440  1
fbcon                  35102  71
tileblit                1999  1 fbcon
font                    7557  1 fbcon
bitblit                 4707  1 fbcon
softcursor              1189  1 bitblit
vga16fb                11385  0
vgastate                8961  1 vga16fb
snd_hda_intel          22069  2
snd_hda_codec          74201  2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep               5412  1 snd_hda_codec
snd_pcm_oss            35308  0
snd_mixer_oss          13746  1 snd_pcm_oss
snd_pcm                70694  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_dummy           1338  0
snd_seq_oss            26722  0
snd_seq_midi            4557  0
snd_rawmidi            19056  1 snd_seq_midi
snd_seq_midi_event      6003  2 snd_seq_oss,snd_seq_midi
snd_seq                47263  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer              19130  2 snd_pcm,snd_seq
snd_seq_device          5700  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
i915                  289715  4
snd                    54244  16 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
uvcvideo               57438  0
drm_kms_helper         29329  1 i915
videodev               34425  1 uvcvideo
drm                   163747  5 i915,drm_kms_helper
soundcore               6620  1 snd
psmouse                63677  0
v4l1_compat            13251  2 uvcvideo,videodev
joydev                  8740  0
intel_agp              24375  2 i915
snd_page_alloc          7076  2 snd_hda_intel,snd_pcm
serio_raw               3978  0
rt3090sta             674216  0
agpgart                31724  2 drm,intel_agp
i2c_algo_bit            5028  1 i915
video                  17375  1 i915
output                  1871  1 video
lp                      7028  0
parport                32635  2 ppdev,lp
usbhid                 36110  0
hid                    67288  1 usbhid
ahci                   32680  1
r8169                  34140  0
mii                     4381  1 r8169

sudo lshw -C network:

Kod Seç Genişlet

*-network               
       description: Ethernet interface
       product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:01:00.0
       logical name: eth0
       version: 02
       serial: 6c:62:6d:30:4f:2d
       size: 100MB/s
       capacity: 100MB/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.2.136 latency=0 link=yes multicast=yes port=MII speed=100MB/s
       resources: irq:28 ioport:e000(size=256) memory:e2110000-e2110fff(prefetchable) memory:e2100000-e210ffff(prefetchable)
  *-network DISABLED
       description: Wireless interface
       product: RT3090 Wireless 802.11n 1T/1R PCIe
       vendor: RaLink
       physical id: 0
       bus info: pci@0000:03:00.0
       logical name: wlan0
       version: 00
       width: 32 bits
       clock: 33MHz
       capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
       configuration: broadcast=yes driver=rt3090 latency=0 multicast=yes wireless=RT2860 Wireless
       resources: irq:17 memory:fd600000-fd60ffff

dmesg:

Kod Seç Genişlet

[    0.381430] ACPI: EC: Look up EC in DSDT
[    0.384222] ACPI: Executed 1 blocks of module-level executable AML code
[    0.389290] ACPI: BIOS _OSI(Linux) query ignored
[    0.400870] ACPI: Interpreter enabled
[    0.400880] ACPI: (supports S0 S1 S3 S4 S5)
[    0.400931] ACPI: Using IOAPIC for interrupt routing
[    0.401027] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[    0.401178] PCI: MCFG area at f0000000 reserved in ACPI motherboard resources
[    0.401184] PCI: Using MMCONFIG for extended config space
[    0.422881] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[    0.423348] ACPI: No dock devices found.
[    0.423832] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.423974] pci 0000:00:02.0: reg 10 32bit mmio: [0xfea80000-0xfeafffff]
[    0.423984] pci 0000:00:02.0: reg 14 io port: [0xf100-0xf107]
[    0.423992] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff]
[    0.424011] pci 0000:00:02.0: reg 1c 32bit mmio: [0xfc100000-0xfc1fffff]
[    0.424059] pci 0000:00:02.1: reg 10 32bit mmio: [0xfea00000-0xfea7ffff]
[    0.424196] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfeb00000-0xfeb03fff]
[    0.424273] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.424282] pci 0000:00:1b.0: PME# disabled
[    0.424400] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.424408] pci 0000:00:1c.0: PME# disabled
[    0.424534] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.424542] pci 0000:00:1c.1: PME# disabled
[    0.424661] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.424669] pci 0000:00:1c.2: PME# disabled
[    0.424787] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.424795] pci 0000:00:1c.3: PME# disabled
[    0.424880] pci 0000:00:1d.0: reg 20 io port: [0xf0a0-0xf0bf]
[    0.424963] pci 0000:00:1d.1: reg 20 io port: [0xf080-0xf09f]
[    0.425046] pci 0000:00:1d.2: reg 20 io port: [0xf060-0xf07f]
[    0.425129] pci 0000:00:1d.3: reg 20 io port: [0xf040-0xf05f]
[    0.425219] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfeb05000-0xfeb053ff]
[    0.425299] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.425308] pci 0000:00:1d.7: PME# disabled
[    0.425583] pci 0000:00:1f.2: reg 10 io port: [0xf0f0-0xf0f7]
[    0.425595] pci 0000:00:1f.2: reg 14 io port: [0xf0e0-0xf0e3]
[    0.425607] pci 0000:00:1f.2: reg 18 io port: [0xf0d0-0xf0d7]
[    0.425619] pci 0000:00:1f.2: reg 1c io port: [0xf0c0-0xf0c3]
[    0.425631] pci 0000:00:1f.2: reg 20 io port: [0xf020-0xf03f]
[    0.425643] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfeb04000-0xfeb043ff]
[    0.425695] pci 0000:00:1f.2: PME# supported from D3hot
[    0.425703] pci 0000:00:1f.2: PME# disabled
[    0.425779] pci 0000:00:1f.3: reg 20 io port: [0xf000-0xf01f]
[    0.425886] pci 0000:01:00.0: reg 10 io port: [0xe000-0xe0ff]
[    0.425919] pci 0000:01:00.0: reg 18 64bit mmio pref: [0xe2110000-0xe2110fff]
[    0.425941] pci 0000:01:00.0: reg 20 64bit mmio pref: [0xe2100000-0xe210ffff]
[    0.426010] pci 0000:01:00.0: supports D1 D2
[    0.426015] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.426024] pci 0000:01:00.0: PME# disabled
[    0.426120] pci 0000:00:1c.0: bridge io port: [0xe000-0xefff]
[    0.426129] pci 0000:00:1c.0: bridge 32bit mmio: [0xfe000000-0xfe9fffff]
[    0.426142] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xe2100000-0xe2afffff]
[    0.426211] pci 0000:03:00.0: reg 10 32bit mmio: [0xfd600000-0xfd60ffff]
[    0.426382] pci 0000:00:1c.1: bridge io port: [0xd000-0xdfff]
[    0.426391] pci 0000:00:1c.1: bridge 32bit mmio: [0xfd600000-0xfdffffff]
[    0.426403] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xe1600000-0xe1ffffff]
[    0.426478] pci 0000:00:1c.2: bridge io port: [0xc000-0xcfff]
[    0.426487] pci 0000:00:1c.2: bridge 32bit mmio: [0xfcc00000-0xfd5fffff]
[    0.426499] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xe0b00000-0xe14fffff]
[    0.426575] pci 0000:00:1c.3: bridge io port: [0xb000-0xbfff]
[    0.426583] pci 0000:00:1c.3: bridge 32bit mmio: [0xfc200000-0xfcbfffff]
[    0.426596] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xe0000000-0xe09fffff]
[    0.426671] pci 0000:00:1e.0: transparent bridge
[    0.426726] pci_bus 0000:00: on NUMA node 0
[    0.426737] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.426936] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[    0.427161] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.427307] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.427437] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    0.427565] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[    0.450048] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.450275] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.450498] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.450725] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.450947] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.451170] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.451394] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.451617] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.451873] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.451897] vgaarb: loaded
[    0.452168] SCSI subsystem initialized
[    0.452200] libata version 3.00 loaded.
[    0.452200] usbcore: registered new interface driver usbfs
[    0.452200] usbcore: registered new interface driver hub
[    0.452200] usbcore: registered new device driver usb
[    0.452248] ACPI: WMI: Mapper loaded
[    0.452253] PCI: Using ACPI for IRQ routing
[    0.452560] NetLabel: Initializing
[    0.452565] NetLabel:  domain hash size = 128
[    0.452569] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.452592] NetLabel:  unlabeled traffic allowed by default
[    0.452688] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.452700] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.452711] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.464040] Switching to clocksource hpet
[    0.469452] AppArmor: AppArmor Filesystem Enabled
[    0.469495] pnp: PnP ACPI init
[    0.469585] ACPI: bus type pnp registered
[    0.478916] pnp: PnP ACPI: found 12 devices
[    0.478924] ACPI: ACPI bus type pnp unregistered
[    0.478934] PnPBIOS: Disabled by ACPI PNP
[    0.478969] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[    0.478979] system 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved
[    0.478999] system 00:03: ioport range 0x800-0x87f has been reserved
[    0.479009] system 00:03: ioport range 0x480-0x4bf has been reserved
[    0.479020] system 00:03: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.479030] system 00:03: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.479040] system 00:03: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.479050] system 00:03: iomem range 0xfed20000-0xfed8ffff has been reserved
[    0.479060] system 00:03: iomem range 0xffe00000-0xffffffff has been reserved
[    0.479083] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[    0.514225] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[    0.514235] pci 0000:00:1c.0:   IO window: 0xe000-0xefff
[    0.514246] pci 0000:00:1c.0:   MEM window: 0xfe000000-0xfe9fffff
[    0.514255] pci 0000:00:1c.0:   PREFETCH window: 0x000000e2100000-0x000000e2afffff
[    0.514268] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[    0.514275] pci 0000:00:1c.1:   IO window: 0xd000-0xdfff
[    0.514284] pci 0000:00:1c.1:   MEM window: 0xfd600000-0xfdffffff
[    0.514293] pci 0000:00:1c.1:   PREFETCH window: 0x000000e1600000-0x000000e1ffffff
[    0.514306] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:05
[    0.514312] pci 0000:00:1c.2:   IO window: 0xc000-0xcfff
[    0.514322] pci 0000:00:1c.2:   MEM window: 0xfcc00000-0xfd5fffff
[    0.514331] pci 0000:00:1c.2:   PREFETCH window: 0x000000e0b00000-0x000000e14fffff
[    0.514343] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:07
[    0.514350] pci 0000:00:1c.3:   IO window: 0xb000-0xbfff
[    0.514360] pci 0000:00:1c.3:   MEM window: 0xfc200000-0xfcbfffff
[    0.514369] pci 0000:00:1c.3:   PREFETCH window: 0x000000e0000000-0x000000e09fffff
[    0.514382] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09
[    0.514386] pci 0000:00:1e.0:   IO window: disabled
[    0.514395] pci 0000:00:1e.0:   MEM window: disabled
[    0.514403] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.514438]   alloc irq_desc for 16 on node -1
[    0.514443]   alloc kstat_irqs on node -1
[    0.514456] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.514466] pci 0000:00:1c.0: setting latency timer to 64
[    0.514483]   alloc irq_desc for 17 on node -1
[    0.514487]   alloc kstat_irqs on node -1
[    0.514495] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.514504] pci 0000:00:1c.1: setting latency timer to 64
[    0.514520]   alloc irq_desc for 18 on node -1
[    0.514524]   alloc kstat_irqs on node -1
[    0.514532] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.514540] pci 0000:00:1c.2: setting latency timer to 64
[    0.514556]   alloc irq_desc for 19 on node -1
[    0.514560]   alloc kstat_irqs on node -1
[    0.514568] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.514577] pci 0000:00:1c.3: setting latency timer to 64
[    0.514590] pci 0000:00:1e.0: setting latency timer to 64
[    0.514599] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.514605] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.514611] pci_bus 0000:01: resource 0 io:  [0xe000-0xefff]
[    0.514617] pci_bus 0000:01: resource 1 mem: [0xfe000000-0xfe9fffff]
[    0.514623] pci_bus 0000:01: resource 2 pref mem [0xe2100000-0xe2afffff]
[    0.514629] pci_bus 0000:03: resource 0 io:  [0xd000-0xdfff]
[    0.514635] pci_bus 0000:03: resource 1 mem: [0xfd600000-0xfdffffff]
[    0.514641] pci_bus 0000:03: resource 2 pref mem [0xe1600000-0xe1ffffff]
[    0.514647] pci_bus 0000:05: resource 0 io:  [0xc000-0xcfff]
[    0.514653] pci_bus 0000:05: resource 1 mem: [0xfcc00000-0xfd5fffff]
[    0.514659] pci_bus 0000:05: resource 2 pref mem [0xe0b00000-0xe14fffff]
[    0.514665] pci_bus 0000:07: resource 0 io:  [0xb000-0xbfff]
[    0.514670] pci_bus 0000:07: resource 1 mem: [0xfc200000-0xfcbfffff]
[    0.514676] pci_bus 0000:07: resource 2 pref mem [0xe0000000-0xe09fffff]
[    0.514682] pci_bus 0000:09: resource 3 io:  [0x00-0xffff]
[    0.514688] pci_bus 0000:09: resource 4 mem: [0x000000-0xffffffff]
[    0.514760] NET: Registered protocol family 2
[    0.514976] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.515665] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.516597] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.517043] TCP: Hash tables configured (established 131072 bind 65536)
[    0.517052] TCP reno registered
[    0.517268] NET: Registered protocol family 1
[    0.517311] pci 0000:00:02.0: Boot video device
[    2.578141] cpufreq-nforce2: No nForce2 chipset.
[    2.578198] Scanning for low memory corruption every 60 seconds
[    2.578434] audit: initializing netlink socket (disabled)
[    2.578455] type=2000 audit(1325017080.576:1): initialized
[    2.594901] highmem bounce pool size: 64 pages
[    2.594913] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    2.598483] VFS: Disk quotas dquot_6.5.2
[    2.598623] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    2.599956] fuse init (API version 7.13)
[    2.600152] msgmni has been set to 1689
[    2.600857] alg: No test for stdrng (krng)
[    2.600994] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    2.601036] io scheduler noop registered
[    2.601041] io scheduler anticipatory registered
[    2.601046] io scheduler deadline registered
[    2.601142] io scheduler cfq registered (default)
[    2.601405]   alloc irq_desc for 24 on node -1
[    2.601410]   alloc kstat_irqs on node -1
[    2.601429] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[    2.601445] pcieport 0000:00:1c.0: setting latency timer to 64
[    2.601701]   alloc irq_desc for 25 on node -1
[    2.601706]   alloc kstat_irqs on node -1
[    2.601722] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[    2.601737] pcieport 0000:00:1c.1: setting latency timer to 64
[    2.601959]   alloc irq_desc for 26 on node -1
[    2.601965]   alloc kstat_irqs on node -1
[    2.601979] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
[    2.601995] pcieport 0000:00:1c.2: setting latency timer to 64
[    2.602214]   alloc irq_desc for 27 on node -1
[    2.602219]   alloc kstat_irqs on node -1
[    2.602233] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
[    2.602248] pcieport 0000:00:1c.3: setting latency timer to 64
[    2.602426] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    2.602455] Firmware did not grant requested _OSC control
[    2.602487] Firmware did not grant requested _OSC control
[    2.602512] Firmware did not grant requested _OSC control
[    2.602536] Firmware did not grant requested _OSC control
[    2.602594] Firmware did not grant requested _OSC control
[    2.602620] Firmware did not grant requested _OSC control
[    2.602644] Firmware did not grant requested _OSC control
[    2.602668] Firmware did not grant requested _OSC control
[    2.602698] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    2.607314] ACPI: AC Adapter [ADP1] (off-line)
[    2.607504] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C09:00/PNP0C0D:00/input/input0
[    2.612005] ACPI: Lid Switch [LID0]
[    2.612122] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    2.612129] ACPI: Sleep Button [SLPB]
[    2.612226] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    2.612232] ACPI: Power Button [PWRB]
[    2.612332] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    2.612338] ACPI: Power Button [PWRF]
[    2.613515] ACPI: SSDT 7f45d918 00444 (v01    AMI      IST 00000001 MSFT 03000001)
[    2.615404] Monitor-Mwait will be used to enter C-1 state
[    2.615514] Monitor-Mwait will be used to enter C-2 state
[    2.615617] Monitor-Mwait will be used to enter C-3 state
[    2.615771] processor LNXCPU:00: registered as cooling_device0
[    2.628345] processor LNXCPU:01: registered as cooling_device1
[    2.630481] processor LNXCPU:02: registered as cooling_device2
[    2.632246] processor LNXCPU:03: registered as cooling_device3
[    2.650398] thermal LNXTHERM:01: registered as thermal_zone0
[    2.650415] ACPI: Thermal Zone [THRM] (55 C)
[    2.651853] isapnp: Scanning for PnP cards...
[    2.655255] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.659003] brd: module loaded
[    2.660486] loop: module loaded
[    2.660789] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[    2.662101] Fixed MDIO Bus: probed
[    2.662204] PPP generic driver version 2.4.2
[    2.662304] tun: Universal TUN/TAP device driver, 1.6
[    2.662310] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    2.662519] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.662568]   alloc irq_desc for 23 on node -1
[    2.662574]   alloc kstat_irqs on node -1
[    2.662590] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    2.662621] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    2.662630] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    2.662714] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    2.662765] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    2.662786] ehci_hcd 0000:00:1d.7: debug port 1
[    2.666671] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    2.666705] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfeb05000
[    2.681036] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    2.681256] usb usb1: configuration #1 chosen from 1 choice
[    2.681339] hub 1-0:1.0: USB hub found
[    2.681364] hub 1-0:1.0: 8 ports detected
[    2.681551] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.681596] uhci_hcd: USB Universal Host Controller Interface driver
[    2.681697] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    2.681714] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    2.681723] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    2.681815] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.681861] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f0a0
[    2.682120] usb usb2: configuration #1 chosen from 1 choice
[    2.682198] hub 2-0:1.0: USB hub found
[    2.682216] hub 2-0:1.0: 2 ports detected
[    2.682322] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    2.682336] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    2.682345] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    2.682427] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    2.682483] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f080
[    2.682781] usb usb3: configuration #1 chosen from 1 choice
[    2.682856] hub 3-0:1.0: USB hub found
[    2.682873] hub 3-0:1.0: 2 ports detected
[    2.682981] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    2.682999] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    2.683007] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    2.683103] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    2.683157] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f060
[    2.683391] usb usb4: configuration #1 chosen from 1 choice
[    2.683465] hub 4-0:1.0: USB hub found
[    2.683482] hub 4-0:1.0: 2 ports detected
[    2.683586] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    2.683600] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    2.683608] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    2.683756] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    2.683823] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f040
[    2.684085] usb usb5: configuration #1 chosen from 1 choice
[    2.684160] hub 5-0:1.0: USB hub found
[    2.684178] hub 5-0:1.0: 2 ports detected
[    2.684413] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.713317] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.713340] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.713572] mice: PS/2 mouse device common for all mice
[    2.725193] rtc_cmos 00:05: RTC can wake from S4
[    2.725294] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    2.725340] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    2.725748] device-mapper: uevent: version 1.0.3
[    2.745110] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    2.751959] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[    2.756762] device-mapper: multipath: version 1.1.0 loaded
[    2.756770] device-mapper: multipath round-robin: version 1.0.0 loaded
[    2.757153] EISA: Probing bus 0 at eisa.0
[    2.757200] EISA: Detected 0 cards.
[    2.758043] cpuidle: using governor ladder
[    2.758692] cpuidle: using governor menu
[    2.759936] TCP cubic registered
[    2.760395] NET: Registered protocol family 10
[    2.764843] NET: Registered protocol family 17
[    2.770050] Using IPI No-Shortcut mode
[    2.770291] PM: Resume from disk failed.
[    2.770318] registered taskstats version 1
[    2.771010]   Magic number: 7:907:296
[    2.771048] tty tty29: hash matches
[    2.771159] rtc_cmos 00:05: setting system clock to 2011-12-27 20:18:01 UTC (1325017081)
[    2.771167] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.771172] EDD information not available.
[    2.819322] Freeing initrd memory: 8094k freed
[    3.006791] isapnp: No Plug & Play device found
[    3.006855] Freeing unused kernel memory: 668k freed
[    3.007485] Write protecting the kernel text: 4684k
[    3.007581] Write protecting the kernel read-only data: 1844k
[    3.044394] udev: starting version 151
[    3.045260] ACPI: Battery Slot [BAT1] (battery present)
[    3.105610] usb 1-6: new high speed USB device using ehci_hcd and address 3
[    3.188688] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    3.188736] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    3.188807] r8169 0000:01:00.0: setting latency timer to 64
[    3.188888]   alloc irq_desc for 28 on node -1
[    3.188896]   alloc kstat_irqs on node -1
[    3.188923] r8169 0000:01:00.0: irq 28 for MSI/MSI-X
[    3.190837] eth0: RTL8102e at 0xf8060000, 6c:62:6d:30:4f:2d, XID 04c00000 IRQ 28
[    3.209247] ahci 0000:00:1f.2: version 3.0
[    3.209286] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    3.209378]   alloc irq_desc for 29 on node -1
[    3.209385]   alloc kstat_irqs on node -1
[    3.209410] ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
[    3.209553] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    3.209562] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[    3.209572] ahci 0000:00:1f.2: setting latency timer to 64
[    3.210182] scsi0 : ahci
[    3.210501] scsi1 : ahci
[    3.210686] scsi2 : ahci
[    3.210865] scsi3 : ahci
[    3.211170] ata1: SATA max UDMA/133 abar m1024@0xfeb04000 port 0xfeb04100 irq 29
[    3.211179] ata2: SATA max UDMA/133 abar m1024@0xfeb04000 port 0xfeb04180 irq 29
[    3.211187] ata3: SATA max UDMA/133 abar m1024@0xfeb04000 port 0xfeb04200 irq 29
[    3.211194] ata4: SATA max UDMA/133 abar m1024@0xfeb04000 port 0xfeb04280 irq 29
[    3.313999] usb 1-6: configuration #1 chosen from 1 choice
[    3.528170] ata2: SATA link down (SStatus 0 SControl 300)
[    3.528178] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.528227] ata4: SATA link down (SStatus 0 SControl 300)
[    3.528233] ata3: SATA link down (SStatus 0 SControl 300)
[    3.529435] ata1.00: ATA-8: WDC WD2500BEVT-22A23T0, 01.01A01, max UDMA/133
[    3.529447] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    3.530950] ata1.00: configured for UDMA/133
[    3.544435] scsi 0:0:0:0: Direct-Access     ATA      WDC WD2500BEVT-2 01.0 PQ: 0 ANSI: 5
[    3.544918] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.544976] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    3.545135] sd 0:0:0:0: [sda] Write Protect is off
[    3.545143] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.545211] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.545569]  sda:
[    3.564110] usb 2-1: new full speed USB device using uhci_hcd and address 2
[    3.580076]  sda1 sda2 sda3 sda4
[    3.581051] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.739151] usb 2-1: configuration #1 chosen from 1 choice
[    3.770791] usbcore: registered new interface driver hiddev
[    3.774424] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input6
[    3.774731] generic-usb 0003:046D:C526.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1/input0
[    3.780227] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input7
[    3.780614] generic-usb 0003:046D:C526.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1/input1
[    3.780684] usbcore: registered new interface driver usbhid
[    3.780694] usbhid: v2.6:USB HID core driver
[    4.443297] EXT4-fs (loop0): mounted filesystem with ordered data mode
[   17.736141] udev: starting version 151
[   17.823074] lp: driver loaded but no devices found
[   18.173283] Linux agpgart interface v0.103
[   18.174864] rt3090sta: module is from the staging directory, the quality is unknown, you have been warned.
[   18.257202] rt3090 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   18.257259] rt3090 0000:03:00.0: setting latency timer to 64
[   18.257677]
[   18.257681]
[   18.257683] === pAd = f81cc000, size = 483224 ===
[   18.257686]
[   18.257692] <-- RTMPAllocAdapterBlock, Status=0
[   18.257698] pAd->CSRBaseAddress =0xf80c0000, csr_addr=0xf80c0000!
[   18.271788] agpgart-intel 0000:00:00.0: Intel IGD Chipset
[   18.272252] agpgart-intel 0000:00:00.0: detected 8188K stolen memory
[   18.292804] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[   18.369824] [drm] Initialized drm 1.1.0 20060810
[   18.383828] Linux video capture interface: v2.00
[   18.430748] type=1505 audit(1325009897.157:2):  operation="profile_load" pid=643 name="/sbin/dhclient3"
[   18.431410] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (13d3:5070)
[   18.431528] type=1505 audit(1325009897.157:3):  operation="profile_load" pid=643 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   18.431980] type=1505 audit(1325009897.157:4):  operation="profile_load" pid=643 name="/usr/lib/connman/scripts/dhclient-script"
[   18.450673] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input8
[   18.450852] usbcore: registered new interface driver uvcvideo
[   18.450862] USB Video Class driver (v0.1.0)
[   18.511611] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   18.511626] i915 0000:00:02.0: setting latency timer to 64
[   18.531573]   alloc irq_desc for 30 on node -1
[   18.531584]   alloc kstat_irqs on node -1
[   18.531607] i915 0000:00:02.0: irq 30 for MSI/MSI-X
[   18.531627] [drm] set up 7M of stolen space
[   18.636723] [drm] initialized overlay support
[   18.693847] psmouse serio1: ID: 10 00 64
[   19.057650] fb0: inteldrmfb frame buffer device
[   19.057656] registered panic notifier
[   19.068382] Finger Sensing Pad, hw: 13.2.1, sw: 1.0.0-K, buttons: 2
[   19.095369] acpi device:26: registered as cooling_device4
[   19.096190] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[   19.096300] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   19.096343] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   19.096441] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   19.096499] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   19.102348] vga16fb: initializing
[   19.102359] vga16fb: mapped to 0xc00a0000
[   19.102369] vga16fb: not registering due to another framebuffer present
[   19.177600] [drm] Big FIFO is enabled
[   19.177620] [drm] Big FIFO is enabled
[   19.204640] hda_codec: ALC888: BIOS auto-probing.
[   19.206324] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[   19.363836] Console: switching to colour frame buffer device 128x37
[   19.779039] input: FSPPS/2 Sentelic FingerSensingPad as /devices/platform/i8042/serio1/input/input11
[   22.500895] Adding 261112k swap on /host/ubuntu/disks/swap.disk.  Priority:-1 extents:1 across:261112k
[   22.876776] type=1505 audit(1325009901.605:5):  operation="profile_replace" pid=843 name="/sbin/dhclient3"
[   22.877573] type=1505 audit(1325009901.605:6):  operation="profile_replace" pid=843 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   22.878033] type=1505 audit(1325009901.605:7):  operation="profile_replace" pid=843 name="/usr/lib/connman/scripts/dhclient-script"
[   22.938709] type=1505 audit(1325009901.665:8):  operation="profile_load" pid=847 name="/usr/sbin/tcpdump"
[   22.979065] type=1505 audit(1325009901.705:9):  operation="profile_load" pid=846 name="/usr/lib/cups/backend/cups-pdf"
[   22.980001] type=1505 audit(1325009901.705:10):  operation="profile_load" pid=846 name="/usr/sbin/cupsd"
[   22.983685] r8169: eth0: link up
[   22.983706] r8169: eth0: link up
[   22.994286] RX DESC e01a3000  size = 2048
[   22.994681] <-- RTMPAllocTxRxRingMemory, Status=0
[   22.997647] RtmpOSFileOpen(): Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
[   22.997654] Open file "/etc/Wireless/RT2860STA/RT2860STA.dat" failed!
[   22.997660] 1. Phy Mode = 0
[   22.997663] ERROR!!! NICReadRegParameters failed, Status[=0x00000001]
[   23.002804] !!! rt28xx Initialized fail !!!
[   23.015777] type=1505 audit(1325009901.741:11):  operation="profile_load" pid=844 name="/usr/bin/evince"
[   23.050073] RX DESC df46e000  size = 2048
[   23.050631] <-- RTMPAllocTxRxRingMemory, Status=0
[   23.054175] RtmpOSFileOpen(): Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
[   23.054185] Open file "/etc/Wireless/RT2860STA/RT2860STA.dat" failed!
[   23.054193] 1. Phy Mode = 0
[   23.054197] ERROR!!! NICReadRegParameters failed, Status[=0x00000001]
[   23.059438] !!! rt28xx Initialized fail !!!
[   23.275676] ppdev: user-space parallel port driver
[   23.794476] CPU0 attaching NULL sched-domain.
[   23.794488] CPU1 attaching NULL sched-domain.
[   23.794494] CPU2 attaching NULL sched-domain.
[   23.794499] CPU3 attaching NULL sched-domain.
[   23.828729] CPU0 attaching sched-domain:
[   23.828736]  domain 0: span 0-1 level SIBLING
[   23.828743]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[   23.828755]   domain 1: span 0-3 level MC
[   23.828760]    groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
[   23.828774] CPU1 attaching sched-domain:
[   23.828779]  domain 0: span 0-1 level SIBLING
[   23.828784]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[   23.828795]   domain 1: span 0-3 level MC
[   23.828800]    groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
[   23.828812] CPU2 attaching sched-domain:
[   23.828817]  domain 0: span 2-3 level SIBLING
[   23.828822]   groups: 2 (cpu_power = 589) 3 (cpu_power = 589)
[   23.828833]   domain 1: span 0-3 level MC
[   23.828838]    groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
[   23.828851] CPU3 attaching sched-domain:
[   23.828855]  domain 0: span 2-3 level SIBLING
[   23.828860]   groups: 3 (cpu_power = 589) 2 (cpu_power = 589)
[   23.828872]   domain 1: span 0-3 level MC
[   23.828876]    groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
[   26.092472] CPU0 attaching NULL sched-domain.
[   26.092485] CPU1 attaching NULL sched-domain.
[   26.092491] CPU2 attaching NULL sched-domain.
[   26.092496] CPU3 attaching NULL sched-domain.
[   26.126014] CPU0 attaching sched-domain:
[   26.126026]  domain 0: span 0-1 level SIBLING
[   26.126034]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[   26.126053]   domain 1: span 0-3 level MC
[   26.126060]    groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
[   26.126083] CPU1 attaching sched-domain:
[   26.126090]  domain 0: span 0-1 level SIBLING
[   26.126098]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[   26.126114]   domain 1: span 0-3 level MC
[   26.126121]    groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178)
[   26.126140] CPU2 attaching sched-domain:
[   26.126147]  domain 0: span 2-3 level SIBLING
[   26.126153]   groups: 2 (cpu_power = 589) 3 (cpu_power = 589)
[   26.126166]   domain 1: span 0-3 level MC
[   26.126171]    groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
[   26.126184] CPU3 attaching sched-domain:
[   26.126188]  domain 0: span 2-3 level SIBLING
[   26.126193]   groups: 3 (cpu_power = 589) 2 (cpu_power = 589)
[   26.126205]   domain 1: span 0-3 level MC
[   26.126210]    groups: 2-3 (cpu_power = 1178) 0-1 (cpu_power = 1178)
[   33.224139] eth0: no IPv6 routers present
[  104.564782] r8169: eth0: link down
[  114.833156] r8169: eth0: link up
[  249.710775] r8169: eth0: link down
[  382.802458] r8169: eth0: link up


[if]

Kod Seç Genişlet

*-network DISABLED

@BUrakArısoy, kart ya donanımsal ya da yazılımsal olarak kapatılmış.

Kod Seç Genişlet

rfkill list komutunun çıktısını görseydim ne yapmanız gerektiğini söyleyebilirdim. Ben olmadığım zaman konuya bakarsanız, eğer komutun çıktısında

Kod Seç Genişlet

Soft blocked: yes yazıyorsa

Kod Seç Genişlet

sudo rfkill unblock all komutunu verip bağlanmaya çalışın; yok eğer

Kod Seç Genişlet

Hard blocked: yes yazıyorsa ya bilgisayarın sağında solunda bulunan bir düğme ile ya da Fn+bir tuş ile açılabilir.