[Çözüldü]Ubuntu 10.10: modeme bağlandıktan sonra internet gelmiyor :(

[umitkavak]

Merhaba arkadaşlar bir ay kadardır ubuntuyu kullanıoyrum ve wireless ilgili bir sorunum var. Şöyle ki modeme bağlanıyorum bağlandıktan sonra internet sayfası açıoyrum ama sadece açtıgımla kalıyorum. sayfa gelmişyor ve modem dibimde olmasına sinyal gücü çok az geliyor hatta bazen düşüyor. Ama windowsta böyle bir sorunum yok. Yani sorun ubuntunun birşeyini eksik yapıyor olmam da. Yardımcı olur musunuz iyi günler...

[if]

@umitkavak, http://forum.ubuntu-tr.net/index.php?topic=28764.0 bağlantısındaki komut çıktılarınıyla birlikte modemin marka ve modeli, ağ için kullandığınız şifreleme türünü (WPA, WEP vs.) buraya geçermisiniz. Ağa bağlandıktan sonra

Kod Seç Genişlet

dmesg | tail çıktısını da geçiniz.

[umitkavak]

Kod Seç Genişlet

lspci

00:00.0 HOST BRIDGE: ADVANCED MICRO DEVICES [AMD] RS780 HOST BRIDGE ALTERNATE

00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx)

00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1)

00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2)

00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode]

00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller

00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller

00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller

00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller

00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 42)

00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40)

00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller (rev 40)

00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40)

00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller

00:16.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller

00:16.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller

00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration

00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map

00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller

00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control

00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control

01:05.0 VGA compatible controller: ATI Technologies Inc M880G [Mobility Radeon HD 4200]

02:00.0 Network controller: RaLink RT3090 Wireless 802.11n 1T/1R PCIe

03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)

Kod Seç Genişlet

lsusb

Bus 007 Device 002: ID 148f:1000 Ralink Technology, Corp.

Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Bus 005 Device 002: ID 09da:000a A4 Tech Co., Ltd Port Mouse

Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Bus 001 Device 002: ID 090c:37bc Feiya Technology Corp.

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Kod Seç Genişlet


ifconfig

eth0      Link encap:Ethernet  HWaddr 3c:4a:92:54:1b:04 

          UP BROADCAST MULTICAST  MTU:1500  Metric:1

          RX PACKETS:0 ERRORS:0 DROPPED:0 OVERRUNS:0 FRAME:0

          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

          COLLİSİONS:0 TXQUEUELEN:1000

          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

          INTERRUPT:42 BASE ADDRESS:0XE000



lo        Link encap:Local Loopback 

          inet addr:127.0.0.1  Mask:255.0.0.0

          İNET6 ADDR: ::1/128 SCOPE:HOST

          UP LOOPBACK RUNNING  MTU:16436  Metric:1

          RX PACKETS:8 ERRORS:0 DROPPED:0 OVERRUNS:0 FRAME:0

          TX packets:8 errors:0 dropped:0 overruns:0 carrier:0

          COLLİSİONS:0 TXQUEUELEN:0

          RX bytes:480 (480.0 B)  TX bytes:480 (480.0 B)



wlan0     Link encap:Ethernet  HWaddr e0:2a:82:1d:bc:69 

          inet addr:192.168.1.100  Bcast:192.168.1.255  Mask:255.255.255.0

          inet6 addr: fe80::e22a:82ff:fe1d:bc69/64 Scope:Link

          UP BROADCAST RUNNING MULTICAST  MTU:1500  METRİC:1

          RX packets:45 errors:0 dropped:0 overruns:0 frame:0

          TX PACKETS:54 ERRORS:0 DROPPED:0 OVERRUNS:0 CARRİER:0

          collisions:0 txqueuelen:1000

          RX BYTES:13556 (13.5 KB)  TX BYTES:9313 (9.3 KB)

Kod Seç Genişlet

iwconfig

lo        no wireless extensions.



eth0      no wireless extensions.



wlan0     IEEE 802.11bgn  ESSID:"umitkavak" 

          Mode:Managed  Frequency:2.442 GHz  Access Point: 00:18:39:A3:F0:34   

          BİT RATE=1 MB/S   TX-POWER=20 DBM   

          Retry  long limit:7   RTS thr:off   Fragment thr:off

          POWER MANAGEMENT:OFF

          Link Quality=70/70  Signal level=11 dBm 

          RX İNVALİD NWİD:0  RX İNVALİD CRYPT:0  RX İNVALİD FRAG:0

          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

Kod Seç Genişlet


IWLIST SCANNING

lo        Interface doesn't support scanning.



eth0      Interface doesn't support scanning.



wlan0     Scan completed :

          Cell 01 - Address: 00:18:39:A3:F0:34

                    Channel:7

                    FREQUENCY:2.442 GHZ (CHANNEL 7)

                    Quality=70/70  Signal level=13 dBm 

                    ENCRYPTİON KEY:ON

                    ESSID:"umitkavak"

                    BİT RATES:1 MB/S; 2 MB/S; 5.5 MB/S; 11 MB/S; 6 MB/S

                              9 Mb/s; 12 Mb/s; 18 Mb/s

                    BİT RATES:24 MB/S; 36 MB/S; 48 MB/S; 54 MB/S

                    Mode:Master

                    EXTRA:TSF=0000000CA4FD7F36

                    Extra: Last beacon: 19352ms ago

                    IE: UNKNOWN: 0009756D69746B6176616B

                    IE: Unknown: 010882848B960C121824

                    IE: UNKNOWN: 030107

                    IE: Unknown: 2A0100

                    IE: UNKNOWN: 32043048606C

                    IE: Unknown: DD180050F2020101030003A4000027A4000042435E0062322F00

                    IE: UNKNOWN: DD1E00904C334E10030000000000000000000000000000000000000000000000

                    IE: Unknown: DD1A00904C3407050100000000000000000000000000000000000000

Kod Seç Genişlet


LSMOD

Module                  Size  Used by

rfcomm                 33843  4

parport_pc             26058  0

ppdev                   5556  0

binfmt_misc             6599  1

sco                     7998  2

bnep                    9542  2

l2cap                  37040  16 rfcomm,bnep

joydev                  8767  0

snd_hda_codec_realtek   218460  1

snd_hda_intel          22235  2

rt2860sta             504366  0

snd_hda_codec          87552  2 snd_hda_codec_realtek,snd_hda_intel

snd_hwdep               5040  1 snd_hda_codec

arc4                    1165  2

snd_pcm                71475  2 snd_hda_intel,snd_hda_codec

snd_seq_midi            4588  0

rt2800pci               8852  0

snd_rawmidi            17783  1 snd_seq_midi

rt2800lib              28961  1 rt2800pci

rt2x00usb               9779  1 rt2800lib

snd_seq_midi_event      6047  1 snd_seq_midi

rt2x00pci               6029  1 rt2800pci

crc_ccitt               1351  2 rt2860sta,rt2800pci

snd_seq                47174  2 snd_seq_midi,snd_seq_midi_event

rt2x00lib              27307  4 rt2800pci,rt2800lib,rt2x00usb,rt2x00pci

led_class               2633  1 rt2x00lib

snd_timer              19067  2 snd_pcm,snd_seq

fglrx                2252513  33

mac80211              231927  3 rt2x00usb,rt2x00pci,rt2x00lib

snd_seq_device          5744  3 snd_seq_midi,snd_rawmidi,snd_seq

btusb                  11001  2

uvcvideo               55911  0

bluetooth              50500  9 rfcomm,sco,bnep,l2cap,btusb

hp_wmi                  5223  0

videodev               43098  1 uvcvideo

video                  18712  0

snd                    49102  13 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device

psmouse                59033  0

v4l1_compat            13359  2 uvcvideo,videodev

cfg80211              144790  2 rt2x00lib,mac80211

agpgart                32011  1 fglrx

output                  1883  1 video

serio_raw               4022  0

shpchp                 29886  0

soundcore                880  1 snd

k10temp                 2607  0

eeprom_93cx6            1345  1 rt2800pci

snd_page_alloc          7120  2 snd_hda_intel,snd_pcm

i2c_piix4               8635  0

lp                      7342  0

parport                31492  3 parport_pc,ppdev,lp

hid_a4tech              2018  0

usbhid                 36882  0

hid                    67742  2 hid_a4tech,usbhid

ahci                   19326  3

libahci                21728  1 ahci

r8169                  36553  0

mii                     4425  1 r8169

Kod Seç Genişlet

rfkill list

0: hp-bluetooth: Bluetooth

Soft blocked: no

Hard blocked: no

1: hci0: Bluetooth

Soft blocked: no

Hard blocked: no

2: phy0: Wireless LAN

Soft blocked: no

Hard blocked: no

Kod Seç Genişlet


sudo lshw -C network

  *-network               

       DESCRİPTİON: WİRELESS İNTERFACE

       product: RT3090 Wireless 802.11n 1T/1R PCIe

       VENDOR: RALİNK

       physical id: 0

       BUS İNFO: PCİ@0000:02:00.0

       logical name: wlan0

       VERSİON: 00

       serial: e0:2a:82:1d:bc:69

       WİDTH: 32 BİTS

       clock: 33MHz

       CAPABİLİTİES: PM MSİ PCİEXPRESS BUS_MASTER CAP_LİST ETHERNET PHYSİCAL WİRELESS

       configuration: broadcast=yes driver=rt2800pci driverversion=2.6.35-30-generic firmware=N/A ip=192.168.1.100 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn

       RESOURCES: İRQ:17 MEMORY:90100000-9010FFFF

  *-network

       DESCRİPTİON: ETHERNET İNTERFACE

       product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller

       VENDOR: REALTEK SEMİCONDUCTOR CO., LTD.

       physical id: 0

       BUS İNFO: PCİ@0000:03:00.0

       logical name: eth0

       VERSİON: 02

       serial: 3c:4a:92:54:1b:04

       SİZE: 10MB/S

       capacity: 100MB/s

       WİDTH: 64 BİTS

       clock: 33MHz

       CAPABİLİTİES: PM MSİ PCİEXPRESS MSİX VPD BUS_MASTER CAP_LİST ROM ETHERNET PHYSİCAL TP Mİİ 10BT 10BT-FD 100BT 100BT-FD AUTONEGOTİATİON

       configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10MB/s

       RESOURCES: İRQ:42 İOPORT:2000(SİZE=256) MEMORY:90010000-90010FFF MEMORY:90000000-9000FFFF MEMORY:90020000-9002FFFF

Kod Seç Genişlet

    0.097326] pci 0000:00:01.0:   bridge window [mem 0x80000000-0x8fffffff 64bit pref]

[    0.097388] pci 0000:02:00.0: reg 10: [mem 0x90100000-0x9010ffff]

[    0.104046] pci 0000:00:05.0: PCI bridge to [bus 02-02]

[    0.104052] pci 0000:00:05.0:   bridge window [io  0xfffff000-0x0000] (disabled)

[    0.104056] pci 0000:00:05.0:   bridge window [mem 0x90100000-0x901fffff]

[    0.104060] pci 0000:00:05.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)

[    0.104173] pci 0000:03:00.0: reg 10: [io  0x2000-0x20ff]

[    0.104189] pci 0000:03:00.0: reg 18: [mem 0x90010000-0x90010fff 64bit pref]

[    0.104200] pci 0000:03:00.0: reg 20: [mem 0x90000000-0x9000ffff 64bit pref]

[    0.104206] pci 0000:03:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]

[    0.104238] pci 0000:03:00.0: supports D1 D2

[    0.104239] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold

[    0.104248] pci 0000:03:00.0: PME# disabled

[    0.112057] pci 0000:00:06.0: PCI bridge to [bus 03-03]

[    0.112063] pci 0000:00:06.0:   bridge window [io  0x2000-0x2fff]

[    0.112066] pci 0000:00:06.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)

[    0.112071] pci 0000:00:06.0:   bridge window [mem 0x90000000-0x900fffff 64bit pref]

[    0.112134] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)

[    0.112138] pci 0000:00:14.4:   bridge window [io  0xf000-0x0000] (disabled)

[    0.112142] pci 0000:00:14.4:   bridge window [mem 0xfff00000-0x000fffff] (disabled)

[    0.112146] pci 0000:00:14.4:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)

[    0.112149] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)

[    0.112151] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)

[    0.112154] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)

[    0.112156] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)

[    0.112158] pci 0000:00:14.4:   bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)

[    0.112161] pci 0000:00:14.4:   bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)

[    0.112163] pci 0000:00:14.4:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)

[    0.112165] pci 0000:00:14.4:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)

[    0.112167] pci 0000:00:14.4:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)

[    0.112170] pci 0000:00:14.4:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)

[    0.112172] pci 0000:00:14.4:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)

[    0.112174] pci 0000:00:14.4:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)

[    0.112176] pci 0000:00:14.4:   bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)

[    0.112179] pci 0000:00:14.4:   bridge window [mem 0x000ec000-0x000effff] (subtractive decode)

[    0.112181] pci 0000:00:14.4:   bridge window [mem 0x80000000-0xf7ffffff] (subtractive decode)

[    0.112183] pci 0000:00:14.4:   bridge window [mem 0xfc000000-0xfed3ffff] (subtractive decode)

[    0.112185] pci 0000:00:14.4:   bridge window [mem 0xfed45000-0xffffffff] (subtractive decode)

[    0.112202] pci_bus 0000:00: on NUMA node 0

[    0.112216] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]

[    0.112461] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]

[    0.112545] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]

[    0.112633] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]

[    0.112763] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]

[    0.123720] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0

[    0.123901] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0

[    0.124093] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0

[    0.124288] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0

[    0.124466] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0

[    0.124605] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0

[    0.124748] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0

[    0.124891] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0

[    0.124941] HEST: Table is not found!

[    0.125006] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none

[    0.125008] vgaarb: loaded

[    0.125126] SCSI subsystem initialized

[    0.125172] libata version 3.00 loaded.

[    0.125209] usbcore: registered new interface driver usbfs

[    0.125219] usbcore: registered new interface driver hub

[    0.125236] usbcore: registered new device driver usb

[    0.125401] ACPI: WMI: Mapper loaded

[    0.125402] PCI: Using ACPI for IRQ routing

[    0.125406] PCI: pci_cache_line_size set to 64 bytes

[    0.125507] reserve RAM buffer: 0000000000002000 - 000000000000ffff

[    0.125510] reserve RAM buffer: 000000000009fc00 - 000000000009ffff

[    0.125512] reserve RAM buffer: 000000006e32f000 - 000000006fffffff

[    0.125515] reserve RAM buffer: 000000006fd3f000 - 000000006fffffff

[    0.125517] reserve RAM buffer: 000000006ff00000 - 000000006fffffff

[    0.125591] NetLabel: Initializing

[    0.125593] NetLabel:  domain hash size = 128

[    0.125594] NetLabel:  protocols = UNLABELED CIPSOv4

[    0.125605] NetLabel:  unlabeled traffic allowed by default

[    0.125635] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0

[    0.125639] hpet0: 3 comparators, 32-bit 14.318180 MHz counter

[    0.127663] Switching to clocksource tsc

[    0.130774] AppArmor: AppArmor Filesystem Enabled

[    0.130792] pnp: PnP ACPI init

[    0.130810] ACPI: bus type pnp registered

[    0.133570] pnp: PnP ACPI: found 11 devices

[    0.133574] ACPI: ACPI bus type pnp unregistered

[    0.133577] PnPBIOS: Disabled by ACPI PNP

[    0.133595] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved

[    0.133597] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved

[    0.133600] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved

[    0.133602] system 00:01: [mem 0xfed80000-0xfed80fff] has been reserved

[    0.133605] system 00:01: [mem 0xfec10000-0xfec1001f] has been reserved

[    0.133608] system 00:01: [mem 0xfed80000-0xfed80fff] has been reserved

[    0.133616] system 00:09: [io  0x0400-0x04cf] has been reserved

[    0.133618] system 00:09: [io  0x04d0-0x04d1] has been reserved

[    0.133620] system 00:09: [io  0x04d6] has been reserved

[    0.133622] system 00:09: [io  0x0550] has been reserved

[    0.133625] system 00:09: [io  0x0680-0x06ff] has been reserved

[    0.133627] system 00:09: [io  0x077a] has been reserved

[    0.133629] system 00:09: [io  0x0c00-0x0c01] has been reserved

[    0.133632] system 00:09: [io  0x0c14] has been reserved

[    0.133634] system 00:09: [io  0x0c50-0x0c52] has been reserved

[    0.133636] system 00:09: [io  0x0c6c] has been reserved

[    0.133638] system 00:09: [io  0x0c6f] has been reserved

[    0.133640] system 00:09: [io  0x0cd0-0x0cdb] has been reserved

[    0.133643] system 00:09: [io  0x0380-0x0387] has been reserved

[    0.133648] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved

[    0.133650] system 00:0a: [mem 0xffe00000-0xffffffff] has been reserved

[    0.169215] pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]

[    0.169240] pci 0000:00:05.0: BAR 15: assigned [mem 0x90500000-0x906fffff 64bit pref]

[    0.169244] pci 0000:00:06.0: BAR 14: assigned [mem 0x90700000-0x907fffff]

[    0.169246] pci 0000:00:05.0: BAR 13: assigned [io  0x1000-0x1fff]

[    0.169249] pci 0000:00:01.0: PCI bridge to [bus 01-01]

[    0.169252] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]

[    0.169255] pci 0000:00:01.0:   bridge window [mem 0x90200000-0x903fffff]

[    0.169258] pci 0000:00:01.0:   bridge window [mem 0x80000000-0x8fffffff 64bit pref]

[    0.169262] pci 0000:00:05.0: PCI bridge to [bus 02-02]

[    0.169264] pci 0000:00:05.0:   bridge window [io  0x1000-0x1fff]

[    0.169267] pci 0000:00:05.0:   bridge window [mem 0x90100000-0x901fffff]

[    0.169270] pci 0000:00:05.0:   bridge window [mem 0x90500000-0x906fffff 64bit pref]

[    0.169275] pci 0000:03:00.0: BAR 6: assigned [mem 0x90020000-0x9002ffff pref]

[    0.169277] pci 0000:00:06.0: PCI bridge to [bus 03-03]

[    0.169279] pci 0000:00:06.0:   bridge window [io  0x2000-0x2fff]

[    0.169282] pci 0000:00:06.0:   bridge window [mem 0x90700000-0x907fffff]

[    0.169285] pci 0000:00:06.0:   bridge window [mem 0x90000000-0x900fffff 64bit pref]

[    0.169289] pci 0000:00:14.4: PCI bridge to [bus 04-04]

[    0.169290] pci 0000:00:14.4:   bridge window [io  disabled]

[    0.169295] pci 0000:00:14.4:   bridge window [mem disabled]

[    0.169298] pci 0000:00:14.4:   bridge window [mem pref disabled]

[    0.169309] pci 0000:00:01.0: setting latency timer to 64

[    0.169316]   alloc irq_desc for 17 on node -1

[    0.169318]   alloc kstat_irqs on node -1

[    0.169324] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17

[    0.169327] pci 0000:00:05.0: setting latency timer to 64

[    0.169332]   alloc irq_desc for 18 on node -1

[    0.169333]   alloc kstat_irqs on node -1

[    0.169336] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18

[    0.169339] pci 0000:00:06.0: setting latency timer to 64

[    0.169346] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]

[    0.169348] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]

[    0.169350] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]

[    0.169353] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]

[    0.169355] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]

[    0.169357] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]

[    0.169359] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]

[    0.169361] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]

[    0.169363] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]

[    0.169365] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]

[    0.169368] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]

[    0.169370] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]

[    0.169372] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]

[    0.169374] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]

[    0.169376] pci_bus 0000:00: resource 18 [mem 0x80000000-0xf7ffffff]

[    0.169378] pci_bus 0000:00: resource 19 [mem 0xfc000000-0xfed3ffff]

[    0.169381] pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff]

[    0.169383] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]

[    0.169385] pci_bus 0000:01: resource 1 [mem 0x90200000-0x903fffff]

[    0.169387] pci_bus 0000:01: resource 2 [mem 0x80000000-0x8fffffff 64bit pref]

[    0.169390] pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]

[    0.169392] pci_bus 0000:02: resource 1 [mem 0x90100000-0x901fffff]

[    0.169394] pci_bus 0000:02: resource 2 [mem 0x90500000-0x906fffff 64bit pref]

[    0.169397] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]

[    0.169399] pci_bus 0000:03: resource 1 [mem 0x90700000-0x907fffff]

[    0.169401] pci_bus 0000:03: resource 2 [mem 0x90000000-0x900fffff 64bit pref]

[    0.169404] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]

[    0.169406] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]

[    0.169408] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]

[    0.169410] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000c3fff]

[    0.169412] pci_bus 0000:04: resource 8 [mem 0x000c4000-0x000c7fff]

[    0.169414] pci_bus 0000:04: resource 9 [mem 0x000c8000-0x000cbfff]

[    0.169416] pci_bus 0000:04: resource 10 [mem 0x000d0000-0x000d3fff]

[    0.169418] pci_bus 0000:04: resource 11 [mem 0x000d4000-0x000d7fff]

[    0.169420] pci_bus 0000:04: resource 12 [mem 0x000d8000-0x000dbfff]

[    0.169422] pci_bus 0000:04: resource 13 [mem 0x000dc000-0x000dffff]

[    0.169425] pci_bus 0000:04: resource 14 [mem 0x000e0000-0x000e3fff]

[    0.169427] pci_bus 0000:04: resource 15 [mem 0x000e4000-0x000e7fff]

[    0.169429] pci_bus 0000:04: resource 16 [mem 0x000e8000-0x000ebfff]

[    0.169431] pci_bus 0000:04: resource 17 [mem 0x000ec000-0x000effff]

[    0.169433] pci_bus 0000:04: resource 18 [mem 0x80000000-0xf7ffffff]

[    0.169435] pci_bus 0000:04: resource 19 [mem 0xfc000000-0xfed3ffff]

[    0.169437] pci_bus 0000:04: resource 20 [mem 0xfed45000-0xffffffff]

[    0.169467] NET: Registered protocol family 2

[    0.169516] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)

[    0.169693] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)

[    0.170276] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)

[    0.170577] TCP: Hash tables configured (established 131072 bind 65536)

[    0.170579] TCP reno registered

[    0.170582] UDP hash table entries: 512 (order: 2, 16384 bytes)

[    0.170593] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)

[    0.170678] NET: Registered protocol family 1

[    0.170691] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled

[    0.628467] pci 0000:01:05.0: Boot video device

[    0.628492] PCI: CLS 64 bytes, default 64

[    0.628551] Simple Boot Flag at 0x44 set to 0x1

[    0.628664] cpufreq-nforce2: No nForce2 chipset.

[    0.628684] Scanning for low memory corruption every 60 seconds

[    0.628791] audit: initializing netlink socket (disabled)

[    0.628800] type=2000 audit(1321548846.628:1): initialized

[    0.637305] Trying to unpack rootfs image as initramfs...

[    0.648504] highmem bounce pool size: 64 pages

[    0.648510] HugeTLB registered 4 MB page size, pre-allocated 0 pages

[    0.656653] VFS: Disk quotas dquot_6.5.2

[    0.656731] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

[    0.657229] fuse init (API version 7.14)

[    0.657294] msgmni has been set to 1689

[    0.892496] Freeing initrd memory: 10556k freed

[    0.899028] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)

[    0.899032] io scheduler noop registered

[    0.899034] io scheduler deadline registered

[    0.899048] io scheduler cfq registered (default)

[    0.899142] pcieport 0000:00:05.0: setting latency timer to 64

[    0.899163]   alloc irq_desc for 40 on node -1

[    0.899165]   alloc kstat_irqs on node -1

[    0.899172] pcieport 0000:00:05.0: irq 40 for MSI/MSI-X

[    0.899230] pcieport 0000:00:06.0: setting latency timer to 64

[    0.899248]   alloc irq_desc for 41 on node -1

[    0.899249]   alloc kstat_irqs on node -1

[    0.899253] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X

[    0.899307] pci_hotplug: PCI Hot Plug PCI Core version: 0.5

[    0.899366] pciehp: PCI Express Hot Plug Controller Driver version: 0.4

[    0.899870] ACPI: AC Adapter [ACAD] (on-line)

[    0.899922] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0

[    0.899927] ACPI: Power Button [PWRB]

[    0.899979] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1

[    0.900331] ACPI: Lid Switch [LID]

[    0.900389] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2

[    0.900394] ACPI: Power Button [PWRF]

[    0.900667] ACPI: acpi_idle registered with cpuidle

[    0.900732] ACPI: processor limited to max C-state 1

[    0.903229] [Firmware Bug]: Invalid critical threshold (0)

[    0.904691] thermal LNXTHERM:01: registered as thermal_zone0

[    0.904700] ACPI: Thermal Zone [THRM] (56 C)

[    0.904844] ERST: Table is not found!

[    0.905199] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

[    0.906509] brd: module loaded

[    0.906878] loop: module loaded

[    0.907244] Fixed MDIO Bus: probed

[    0.907268] PPP generic driver version 2.4.2

[    0.907295] tun: Universal TUN/TAP device driver, 1.6

[    0.907297] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>

[    0.907347] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[    0.907404] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17

[    0.907421] ehci_hcd 0000:00:12.2: setting latency timer to 64

[    0.907424] ehci_hcd 0000:00:12.2: EHCI Host Controller

[    0.907451] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1

[    0.907461] ehci_hcd 0000:00:12.2: QUIRK: Enable exception for AMD Hudson ASPM

[    0.907485] ehci_hcd 0000:00:12.2: debug port 1

[    0.907506] ehci_hcd 0000:00:12.2: irq 17, io mem 0x90408600

[    0.907532] isapnp: Scanning for PnP cards...

[    0.961872] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00

[    0.961969] hub 1-0:1.0: USB hub found

[    0.961973] hub 1-0:1.0: 5 ports detected

[    0.962031] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17

[    0.962040] ehci_hcd 0000:00:13.2: setting latency timer to 64

[    0.962043] ehci_hcd 0000:00:13.2: EHCI Host Controller

[    0.962067] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2

[    0.962075] ehci_hcd 0000:00:13.2: QUIRK: Enable exception for AMD Hudson ASPM

[    0.962094] ehci_hcd 0000:00:13.2: debug port 1

[    0.962103] ehci_hcd 0000:00:13.2: irq 17, io mem 0x90408500

[    1.059504] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00

[    1.059588] hub 2-0:1.0: USB hub found

[    1.059591] hub 2-0:1.0: 5 ports detected

[    1.059644] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17

[    1.059652] ehci_hcd 0000:00:16.2: setting latency timer to 64

[    1.059655] ehci_hcd 0000:00:16.2: EHCI Host Controller

[    1.059680] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3

[    1.059688] ehci_hcd 0000:00:16.2: QUIRK: Enable exception for AMD Hudson ASPM

[    1.059706] ehci_hcd 0000:00:16.2: debug port 1

[    1.059715] ehci_hcd 0000:00:16.2: irq 17, io mem 0x90408400

[    1.108376] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00

[    1.108457] hub 3-0:1.0: USB hub found

[    1.108460] hub 3-0:1.0: 4 ports detected

[    1.108508] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[    1.108522] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18

[    1.108530] ohci_hcd 0000:00:12.0: setting latency timer to 64

[    1.108533] ohci_hcd 0000:00:12.0: OHCI Host Controller

[    1.108555] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4

[    1.108576] ohci_hcd 0000:00:12.0: irq 18, io mem 0x90407000

[    1.248964] hub 4-0:1.0: USB hub found

[    1.248974] hub 4-0:1.0: 5 ports detected

[    1.249024] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18

[    1.249032] ohci_hcd 0000:00:13.0: setting latency timer to 64

[    1.249035] ohci_hcd 0000:00:13.0: OHCI Host Controller

[    1.249062] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5

[    1.249078] ohci_hcd 0000:00:13.0: irq 18, io mem 0x90406000

[    1.297034] isapnp: No Plug & Play device found

[    1.301210] ACPI: Battery Slot [BAT0] (battery present)

[    1.308607] hub 5-0:1.0: USB hub found

[    1.308619] hub 5-0:1.0: 5 ports detected

[    1.308685] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18

[    1.308702] ohci_hcd 0000:00:14.5: setting latency timer to 64

[    1.308706] ohci_hcd 0000:00:14.5: OHCI Host Controller

[    1.308734] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6

[    1.308752] ohci_hcd 0000:00:14.5: irq 18, io mem 0x90405000

[    1.352542] usb 1-3: new high speed USB device using ehci_hcd and address 2

[    1.356703] hub 6-0:1.0: USB hub found

[    1.356713] hub 6-0:1.0: 2 ports detected

[    1.356767] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18

[    1.356784] ohci_hcd 0000:00:16.0: setting latency timer to 64

[    1.356787] ohci_hcd 0000:00:16.0: OHCI Host Controller

[    1.356816] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7

[    1.356834] ohci_hcd 0000:00:16.0: irq 18, io mem 0x90404000

[    1.416268] hub 7-0:1.0: USB hub found

[    1.416279] hub 7-0:1.0: 4 ports detected

[    1.416338] uhci_hcd: USB Universal Host Controller Interface driver

[    1.416409] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12

[    1.434316] serio: i8042 KBD port at 0x60,0x64 irq 1

[    1.434322] serio: i8042 AUX port at 0x60,0x64 irq 12

[    1.434396] mice: PS/2 mouse device common for all mice

[    1.435759] rtc_cmos 00:05: RTC can wake from S4

[    1.435792] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0

[    1.435815] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs

[    1.435902] device-mapper: uevent: version 1.0.3

[    1.435985] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com

[    1.436027] device-mapper: multipath: version 1.1.1 loaded

[    1.436029] device-mapper: multipath round-robin: version 1.0.0 loaded

[    1.436116] EISA: Probing bus 0 at eisa.0

[    1.436118] EISA: Cannot allocate resource for mainboard

[    1.436120] Cannot allocate resource for EISA slot 1

[    1.436121] Cannot allocate resource for EISA slot 2

[    1.436123] Cannot allocate resource for EISA slot 3

[    1.436125] Cannot allocate resource for EISA slot 4

[    1.436126] Cannot allocate resource for EISA slot 5

[    1.436128] Cannot allocate resource for EISA slot 6

[    1.436129] Cannot allocate resource for EISA slot 7

[    1.436131] Cannot allocate resource for EISA slot 8

[    1.436132] EISA: Detected 0 cards.

[    1.436161] cpuidle: using governor ladder

[    1.436162] cpuidle: using governor menu

[    1.436377] TCP cubic registered

[    1.436478] NET: Registered protocol family 10

[    1.436754] lo: Disabled Privacy Extensions

[    1.436925] NET: Registered protocol family 17

[    1.436949] powernow-k8: Found 1 AMD V140 Processor (1 cpu cores) (version 2.20.00)

[    1.436992] powernow-k8:    0 : pstate 0 (2300 MHz)

[    1.436994] powernow-k8:    1 : pstate 1 (1700 MHz)

[    1.436996] powernow-k8:    2 : pstate 2 (800 MHz)

[    1.437026] Using IPI No-Shortcut mode

[    1.437086] PM: Resume from disk failed.

[    1.437095] registered taskstats version 1

[    1.437315]   Magic number: 3:895:944

[    1.437350] tty tty1: hash matches

[    1.437406] rtc_cmos 00:05: setting system clock to 2011-11-17 16:54:08 UTC (1321548848)

[    1.437409] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found

[    1.437410] EDD information not available.

[    1.437498] Freeing unused kernel memory: 688k freed

[    1.437790] Write protecting the kernel text: 4944k

[    1.437816] Write protecting the kernel read-only data: 1976k

[    1.455989] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3

[    1.457830] udev[63]: starting version 163

[    1.614075] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded

[    1.614101] r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18

[    1.614134] r8169 0000:03:00.0: setting latency timer to 64

[    1.614166]   alloc irq_desc for 42 on node -1

[    1.614168]   alloc kstat_irqs on node -1

[    1.614179] r8169 0000:03:00.0: irq 42 for MSI/MSI-X

[    1.614562] r8169 0000:03:00.0: eth0: RTL8102e at 0xf809e000, 3c:4a:92:54:1b:04, XID 04e00000 IRQ 42

[    1.697481] ahci 0000:00:11.0: version 3.0

[    1.697500]   alloc irq_desc for 19 on node -1

[    1.697502]   alloc kstat_irqs on node -1

[    1.697509] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19

[    1.697600] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 3 Gbps 0x3 impl SATA mode

[    1.697603] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part

[    1.698350] scsi0 : ahci

[    1.698491] scsi1 : ahci

[    1.698534] ata1: SATA max UDMA/133 irq_stat 0x00400000, PHY RDY changed irq 19

[    1.698537] ata2: SATA max UDMA/133 abar m1024@0x90408000 port 0x90408180 irq 19

[    1.924082] usb 5-2: new low speed USB device using ohci_hcd and address 2

[    2.192089] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

[    2.202843] ata2.00: ATAPI: hp      DVD RW AD-7586H, KH04, max UDMA/100

[    2.212913] ata2.00: configured for UDMA/100

[    2.356092] usb 7-1: new full speed USB device using ohci_hcd and address 2

[    2.596061] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[    2.597296] ata1.00: ATA-8: WDC WD2500BEVT-60A23T0, 02.01A02, max UDMA/100

[    2.597300] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA

[    2.598635] ata1.00: configured for UDMA/100

[    2.612135] scsi 0:0:0:0: Direct-Access     ATA      WDC WD2500BEVT-6 02.0 PQ: 0 ANSI: 5

[    2.612268] sd 0:0:0:0: Attached scsi generic sg0 type 0

[    2.612463] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)

[    2.612498] sd 0:0:0:0: [sda] Write Protect is off

[    2.612501] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

[    2.612516] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[    2.612806]  sda:

[    2.615118] scsi 1:0:0:0: CD-ROM            hp       DVD RW AD-7586H  KH04 PQ: 0 ANSI: 5

[    2.624083] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[    2.624087] Uniform CD-ROM driver Revision: 3.20

[    2.624197] sr 1:0:0:0: Attached scsi CD-ROM sr0

[    2.624247] sr 1:0:0:0: Attached scsi generic sg1 type 5

[    2.649621]  sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 >

[    2.749253] sd 0:0:0:0: [sda] Attached SCSI disk

[    2.757253] usbcore: registered new interface driver hiddev

[    2.757414] usbcore: registered new interface driver usbhid

[    2.757416] usbhid: USB HID core driver

[    2.763886] input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/input/input4

[    2.763972] a4tech 0003:09DA:000A.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech USB Mouse] on usb-0000:00:13.0-2/input0

[    4.004075] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)

[   14.856749] udev[396]: starting version 163

[   14.916723] lp: driver loaded but no devices found

[   14.923883] Adding 2430972k swap on /dev/sda10.  Priority:-1 extents:1 across:2430972k

[   14.969224] ACPI: resource piix4_smbus [io  0x0b00-0x0b07] conflicts with ACPI region SMBI [??? 0x00000b00-0x00000b0f flags 0x49]

[   14.969228] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

[   15.039247] shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 1022 ss_did 1235

[   15.039253] shpchp 0000:00:01.0: Cannot reserve MMIO region

[   15.039338] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

[   15.393712] EXT4-fs (sda9): re-mounted. Opts: errors=remount-ro

[   15.405660] Linux agpgart interface v0.103

[   15.408390] Linux video capture interface: v2.00

[   15.426062] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20100428/dsopcode-597)

[   15.426070] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.WMID.HWMC] (Node f702e360), AE_AML_BUFFER_LIMIT

[   15.426104] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.WMID.WMAD] (Node f702e480), AE_AML_BUFFER_LIMIT

[   15.426181] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20100428/dsopcode-597)

[   15.426186] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.WMID.HWMC] (Node f702e360), AE_AML_BUFFER_LIMIT

[   15.426216] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.WMID.WMAD] (Node f702e480), AE_AML_BUFFER_LIMIT

[   15.428404] input: HP WMI hotkeys as /devices/virtual/input/input5

[   15.428584] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20100428/dsopcode-597)

[   15.428590] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.WMID.HWMC] (Node f702e360), AE_AML_BUFFER_LIMIT

[   15.428640] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.WMID.WMAD] (Node f702e480), AE_AML_BUFFER_LIMIT

[   15.428723] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20100428/dsopcode-597)

[   15.428728] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.WMID.HWMC] (Node f702e360), AE_AML_BUFFER_LIMIT

[   15.428758] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.WMID.WMAD] (Node f702e480), AE_AML_BUFFER_LIMIT

[   15.428830] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20100428/dsopcode-597)

[   15.428835] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.WMID.HWMC] (Node f702e360), AE_AML_BUFFER_LIMIT

[   15.428864] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.WMID.WMAD] (Node f702e480), AE_AML_BUFFER_LIMIT

[   15.428955] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20100428/dsopcode-597)

[   15.428960] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.WMID.HWMC] (Node f702e360), AE_AML_BUFFER_LIMIT

[   15.428990] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.WMID.WMAD] (Node f702e480), AE_AML_BUFFER_LIMIT

[   15.432986] cfg80211: Calling CRDA to update world regulatory domain

[   15.433314] uvcvideo: Found UVC 1.00 device HP Webcam-101 (090c:37bc)

[   15.433671] Bluetooth: Core ver 2.15

[   15.433703] NET: Registered protocol family 31

[   15.433704] Bluetooth: HCI device and connection manager initialized

[   15.433708] Bluetooth: HCI socket layer initialized

[   15.435595] Bluetooth: Generic Bluetooth USB driver ver 0.6

[   15.435739] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.

[   15.435742] Disabling lock debugging due to kernel taint

[   15.468516] input: HP Webcam-101 as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input6

[   15.468795] usbcore: registered new interface driver uvcvideo

[   15.468798] USB Video Class driver (v0.1.0)

[   15.470587] acpi device:03: registered as cooling_device1

[   15.471414] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input7

[   15.471562] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)

[   15.486429] usbcore: registered new interface driver btusb

[   15.540631] cfg80211: World regulatory domain updated:

[   15.540636]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)

[   15.540639]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[   15.540642]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)

[   15.540644]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)

[   15.540647]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[   15.540649]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[   15.564094] type=1400 audit(1321541662.626:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=719 comm="apparmor_parser"

[   15.564353] type=1400 audit(1321541662.626:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=719 comm="apparmor_parser"

[   15.564500] type=1400 audit(1321541662.626:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=719 comm="apparmor_parser"

[   15.567403] type=1400 audit(1321541662.626:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=734 comm="apparmor_parser"

[   15.567665] type=1400 audit(1321541662.626:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=734 comm="apparmor_parser"

[   15.567812] type=1400 audit(1321541662.626:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=734 comm="apparmor_parser"

[   15.644683] [fglrx] Maximum main memory to use for locked dma buffers: 1640 MBytes.

[   15.644717] [fglrx]   vendor: 1002 device: 9712 count: 1

[   15.644936] [fglrx] ioport: bar 1, base 0x3000, size: 0x100

[   15.644952] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18

[   15.644957] pci 0000:01:05.0: setting latency timer to 64

[   15.645183] [fglrx] Kernel PAT support is enabled

[   15.645203] [fglrx] module loaded - fglrx 8.78.30 [Sep 20 2010] with 1 minors

[   15.665503] rt2800pci 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17

[   15.665526] rt2800pci 0000:02:00.0: setting latency timer to 64

[   15.806887] phy0: Selected rate control algorithm 'minstrel'

[   15.807364] Registered led device: rt2800pci-phy0::radio

[   15.807377] Registered led device: rt2800pci-phy0::assoc

[   15.807390] Registered led device: rt2800pci-phy0::quality

[   15.808160] rt2860sta: module is from the staging directory, the quality is unknown, you have been warned.

[   15.832804]   alloc irq_desc for 16 on node -1

[   15.832808]   alloc kstat_irqs on node -1

[   15.832814] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[   15.832860] HDA Intel 0000:00:14.2: setting latency timer to 64

[   15.889441] hda_codec: ALC259: BIOS auto-probing.

[   16.013703] type=1400 audit(1321541663.074:8): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=933 comm="apparmor_parser"

[   16.015710] type=1400 audit(1321541663.074:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=934 comm="apparmor_parser"

[   16.015973] type=1400 audit(1321541663.074:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=934 comm="apparmor_parser"

[   16.016227] type=1400 audit(1321541663.078:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=934 comm="apparmor_parser"

[   16.332285] ADDRCONF(NETDEV_UP): wlan0: link is not ready

[   16.334794] r8169 0000:03:00.0: eth0: link down

[   16.334972] ADDRCONF(NETDEV_UP): eth0: link is not ready

[   16.725829] Synaptics imleçsürer ( * touchpad), model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04771/0xe40000/0xa0400

[   16.814999] input: SynPS/2 Synaptics imleçsürer ( * touchpad) as /devices/platform/i8042/serio1/input/input8

[   17.197339] Bluetooth: L2CAP ver 2.14

[   17.197342] Bluetooth: L2CAP socket layer initialized

[   17.208304] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

[   17.208308] Bluetooth: BNEP filters: protocol multicast

[   17.222856] Bluetooth: SCO (Voice Link) ver 0.6

[   17.222860] Bluetooth: SCO socket layer initialized

[   17.379534] ppdev: user-space parallel port driver

[   17.505115] Bluetooth: RFCOMM TTY layer initialized

[   17.505121] Bluetooth: RFCOMM socket layer initialized

[   17.505123] Bluetooth: RFCOMM ver 1.11

[   18.375385] [fglrx] ATIF platform detected with notification ID: 0x81

[   18.494327] [fglrx] GART Table is not in FRAME_BUFFER range

[   18.494470] [fglrx] Could not enable MSI; System prevented initialization

[   18.494989] [fglrx] Firegl kernel thread PID: 1258

[   18.495267] [fglrx] IRQ 18 Enabled

[   19.079449] [fglrx] Gart USWC size:548 M.

[   19.079453] [fglrx] Gart cacheable size:215 M.

[   19.079458] [fglrx] Reserved FB block: Shared offset:0, size:1000000

[   19.079460] [fglrx] Reserved FB block: Unshared offset:fffb000, size:5000

[   19.597986] EXT4-fs (sda9): re-mounted. Opts: errors=remount-ro,commit=0

[   22.188192] EXT4-fs (sda9): re-mounted. Opts: errors=remount-ro,commit=0

[   38.178581] wlan0: authenticate with 00:18:39:a3:f0:34 (try 1)

[   38.181447] wlan0: authenticated

[   38.181491] wlan0: associate with 00:18:39:a3:f0:34 (try 1)

[   38.184445] wlan0: RX AssocResp from 00:18:39:a3:f0:34 (capab=0x431 status=0 aid=1)

[   38.184449] wlan0: associated

[   38.184989] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

[   48.920033] wlan0: no IPv6 routers present

Ağa bağlandıktan sonra;

Kod Seç Genişlet

dmesg | tail

[   19.079460] [fglrx] Reserved FB block: Unshared offset:fffb000, size:5000

[   19.597986] EXT4-fs (sda9): re-mounted. Opts: errors=remount-ro,commit=0

[   22.188192] EXT4-fs (sda9): re-mounted. Opts: errors=remount-ro,commit=0

[   38.178581] wlan0: authenticate with 00:18:39:a3:f0:34 (try 1)

[   38.181447] wlan0: authenticated

[   38.181491] wlan0: associate with 00:18:39:a3:f0:34 (try 1)

[   38.184445] wlan0: RX AssocResp from 00:18:39:a3:f0:34 (capab=0x431 status=0 aid=1)

[   38.184449] wlan0: associated

[   38.184989] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

[   48.920033] wlan0: no IPv6 routers present





modem markası linksys 325-wgn teşekkürler....

[if]

@umitkavak, http://forum.ubuntu-tr.net/index.php?topic=29079.msg349699#msg349699 bağlantısında  @heartsmagic'in önerisini deneyip sonucu bildiriniz.

Komutları ve çıktılarını kod etiketi içerisinde veriniz.

Konuyu Ağ kartları kısmına taşıyorum.

[umitkavak]

dostum çok sagol bu yöntem işe yaradı teşekkür ettim  

[if]

Rica ederim @umitkavak. Arama kutusuna "RaLink RT3090 Wireless 802.11n 1T/1R PCIe" yazdım ve güncel bir çözüm önerisini buraya geçtim sadece:) Konuyu kilitleyebiliriz o zaman.