[Çözüldü] Grub menüsünden ubuntuyu seçtikten 21 sn sonra diskten okunuyor

Başlatan gomugomuno, 30 Aralık 2010 - 01:42:47

« önceki - sonraki »

0 Üyeler ve 1 Ziyaretçi konuyu incelemekte.

gomugomuno

Uzun süre sonra tekrar ubuntuya geçtim yanlız yine problemle karşılaştım. Ancak bu giderilemeyecek bir sorun değil gibi görünüyor. Hata yok sadece grup menüsünden ubuntuyu seçtiğimde 21 sn sol üst köşede kalın bir tire yanıp sönüyor. Ardından tire(-) incelerek 7 sn de ubuntu açılıyor. Bu 20 sni nasıl yokedebilirim ya da neyden kaynaklanıyor olabilir. Diskimde win7 ile birlikte  ubuntu 10.10  kuruludur.

heartsmagic

Grub ayarlarından veya ilk başlattığın yerden e'ye basarak çekirdek satırındaki splash ve quiet kısmını silersen nerede beklediğini belki görebiliriz. Fakat senin hesaba bakacak olursak sanırım yedi saniye içinde Ubuntu'nun açılmasını istiyorsun ki bu bir hayli zor şu aşamada. Kaldı ki toplamda kullanılan 28 saniye bile bence gayet güzel.
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?


Böylece yalan, dünyanın düzenine dönüştürülüyor.

bytan

Ayrıca dmesg çıktısını da eklersen gidişattaki -varsa- takılmaları görmeye çalışabiliriz:

dmesg
Umut en büyük kötülüktür; işkenceyi uzatır. - F.N.


Bir şey ne ise odur, bu kadar. Öyleyse, iki şey arasında bağdaşıklık varsa, bu aralarında iletişim kuruyorlar demek değildir.
"... kavrayışını bilgi ile derinleştir ..."
PF @ ST

gomugomuno

15 dk önce grup menüüsünde ubuntuyu seçtiğimde açılmadı  .............initframes:  diyordu 3-4 kere yeniden başlatttıkttan sonra açıldı :(


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 30 Aralık 2010 - 11:11:01

dmesq çıktısı:
[    0.328338] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
[    0.328444] pcieport 0000:00:1c.5: setting latency timer to 64
[    0.328492]   alloc irq_desc for 45 on node -1
[    0.328494]   alloc kstat_irqs on node -1
[    0.328503] pcieport 0000:00:1c.5: irq 45 for MSI/MSI-X
[    0.328625] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.328792] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.328884] intel_idle: MWAIT substates: 0x3122220
[    0.328886] intel_idle: does not run on family 6 model 23
[    0.330186] ACPI: AC Adapter [ACAD] (on-line)
[    0.330248] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.330288] ACPI: Lid Switch [LID0]
[    0.330332] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.330337] ACPI: Power Button [PWRB]
[    0.330391] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.330394] ACPI: Power Button [PWRF]
[    0.330682] ACPI: acpi_idle registered with cpuidle
[    0.333349] Monitor-Mwait will be used to enter C-1 state
[    0.339611] Monitor-Mwait will be used to enter C-2 state
[    0.339633] Monitor-Mwait will be used to enter C-3 state
[    0.339641] Marking TSC unstable due to TSC halts in idle
[    0.347716] Switching to clocksource hpet
[    0.372456] ERST: Table is not found!
[    0.372730] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.374302] brd: module loaded
[    0.374852] loop: module loaded
[    0.375038] ata_piix 0000:00:1f.1: version 2.13
[    0.375052] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.375096] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.375268] scsi0 : ata_piix
[    0.375340] scsi1 : ata_piix
[    0.375980] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[    0.375983] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[    0.376312] Fixed MDIO Bus: probed
[    0.376345] PPP generic driver version 2.4.2
[    0.376382] tun: Universal TUN/TAP device driver, 1.6
[    0.376384] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.376468] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.376489] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.376503] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.376507] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.376539] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.376571] ehci_hcd 0000:00:1a.7: debug port 1
[    0.380465] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[    0.380483] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8604800
[    0.384940] ACPI: Battery Slot [BAT1] (battery present)
[    0.384953] isapnp: Scanning for PnP cards...
[    0.423963] Freeing initrd memory: 10508k freed
[    0.429650] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.429857] hub 1-0:1.0: USB hub found
[    0.429863] hub 1-0:1.0: 4 ports detected
[    0.429969]   alloc irq_desc for 23 on node -1
[    0.429971]   alloc kstat_irqs on node -1
[    0.429980] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.430006] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.430009] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.430049] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.430083] ehci_hcd 0000:00:1d.7: debug port 1
[    0.433964] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    0.433986] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8604c00
[    0.448015] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.448116] hub 2-0:1.0: USB hub found
[    0.448120] hub 2-0:1.0: 6 ports detected
[    0.448203] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.448223] uhci_hcd: USB Universal Host Controller Interface driver
[    0.448265] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.448273] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.448277] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.448312] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.448351] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[    0.448476] hub 3-0:1.0: USB hub found
[    0.448481] hub 3-0:1.0: 2 ports detected
[    0.448549]   alloc irq_desc for 21 on node -1
[    0.448551]   alloc kstat_irqs on node -1
[    0.448556] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.448562] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.448566] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.448598] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.448635] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[    0.448752] hub 4-0:1.0: USB hub found
[    0.448758] hub 4-0:1.0: 2 ports detected
[    0.448826] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.448834] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.448837] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.448873] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    0.448901] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
[    0.449023] hub 5-0:1.0: USB hub found
[    0.449027] hub 5-0:1.0: 2 ports detected
[    0.449093] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.449099] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.449103] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.449137] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    0.449174] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
[    0.449287] hub 6-0:1.0: USB hub found
[    0.449291] hub 6-0:1.0: 2 ports detected
[    0.449360] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.449366] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.449370] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.449406] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    0.449433] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[    0.449550] hub 7-0:1.0: USB hub found
[    0.449554] hub 7-0:1.0: 2 ports detected
[    0.449680] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.489536] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.489543] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.489605] mice: PS/2 mouse device common for all mice
[    0.489736] rtc_cmos 00:07: RTC can wake from S4
[    0.489777] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    0.489810] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.489917] device-mapper: uevent: version 1.0.3
[    0.490033] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[    0.490100] device-mapper: multipath: version 1.1.1 loaded
[    0.490103] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.490216] EISA: Probing bus 0 at eisa.0
[    0.490223] Cannot allocate resource for EISA slot 1
[    0.490225] Cannot allocate resource for EISA slot 2
[    0.490227] Cannot allocate resource for EISA slot 3
[    0.490229] Cannot allocate resource for EISA slot 4
[    0.490231] Cannot allocate resource for EISA slot 5
[    0.490233] Cannot allocate resource for EISA slot 6
[    0.490235] Cannot allocate resource for EISA slot 7
[    0.490241] EISA: Detected 0 cards.
[    0.490379] cpuidle: using governor ladder
[    0.490484] cpuidle: using governor menu
[    0.490811] TCP cubic registered
[    0.490945] NET: Registered protocol family 10
[    0.491321] lo: Disabled Privacy Extensions
[    0.491559] NET: Registered protocol family 17
[    0.492205] Using IPI No-Shortcut mode
[    0.492286] PM: Resume from disk failed.
[    0.492298] registered taskstats version 1
[    0.492810]   Magic number: 6:969:75
[    0.492903] rtc_cmos 00:07: setting system clock to 2010-12-30 11:03:58 UTC (1293707038)
[    0.492906] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.492908] EDD information not available.
[    0.527352] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.632376] ata1.00: ATAPI: SlimtypeDVD A  DS8A1P, CX17, max UDMA/33
[    0.672298] ata1.00: configured for UDMA/33
[    0.739421] isapnp: No Plug & Play device found
[    0.741695] scsi 0:0:0:0: CD-ROM            Slimtype DVD A  DS8A1P    CX17 PQ: 0 ANSI: 5
[    0.752437] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    0.752443] Uniform CD-ROM driver Revision: 3.20
[    0.752594] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    0.752639] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    0.752726] Freeing unused kernel memory: 684k freed
[    0.753160] Write protecting the kernel text: 4932k
[    0.753217] Write protecting the kernel read-only data: 1976k
[    0.769653] udev[86]: starting version 163
[    0.776072] usb 1-1: new high speed USB device using ehci_hcd and address 2
[    0.884809] sdhci: Secure Digital Host Controller Interface driver
[    0.884812] sdhci: Copyright(c) Pierre Ossman
[    0.902215] tg3.c:v3.110 (April 9, 2010)
[    0.902284] tg3 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.902300] tg3 0000:04:00.0: setting latency timer to 64
[    0.902616]   alloc irq_desc for 22 on node -1
[    0.902618]   alloc kstat_irqs on node -1
[    0.902626] firewire_ohci 0000:0e:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    0.910374] ahci 0000:00:1f.2: version 3.0
[    0.910390] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.910438]   alloc irq_desc for 46 on node -1
[    0.910441]   alloc kstat_irqs on node -1
[    0.910452] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
[    0.910529] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[    0.910532] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
[    0.910538] ahci 0000:00:1f.2: setting latency timer to 64
[    0.911502] scsi2 : ahci
[    0.911642] scsi3 : ahci
[    0.911788] scsi4 : ahci
[    0.911963] ata3: SATA max UDMA/133 abar m2048@0xf8604000 port 0xf8604100 irq 46
[    0.911967] ata4: SATA max UDMA/133 abar m2048@0xf8604000 port 0xf8604180 irq 46
[    0.911971] ata5: SATA max UDMA/133 abar m2048@0xf8604000 port 0xf8604200 irq 46
[    0.917696] Initializing USB Mass Storage driver...
[    0.920042] scsi5 : usb-storage 1-1:1.0
[    0.920176] usbcore: registered new interface driver usb-storage
[    0.920178] USB Mass Storage support registered.
[    0.997044] firewire_ohci: Added fw-ohci device 0000:0e:06.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x0
[    0.997074] sdhci-pci 0000:0e:06.1: SDHCI controller found [1180:0822] (rev 22)
[    0.997096] sdhci-pci 0000:0e:06.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[    0.998115] sdhci-pci 0000:0e:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    0.999143] Registered led device: mmc0::
[    1.000336] mmc0: SDHCI controller on PCI [0000:0e:06.1] using DMA
[    1.001320] tg3 0000:04:00.0: eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address 00:1b:38:6f:96:37
[    1.001323] tg3 0000:04:00.0: eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0])
[    1.001326] tg3 0000:04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    1.001329] tg3 0000:04:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    1.021235] usb 1-2: new high speed USB device using ehci_hcd and address 3
[    1.232286] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.232309] ata4: SATA link down (SStatus 0 SControl 300)
[    1.232330] ata5: SATA link down (SStatus 0 SControl 300)
[    1.248453] ata3.00: unexpected _GTF length (8)
[    1.253204] ata3.00: ATA-8: SAMSUNG HM500JI, 2AC101C4, max UDMA/133
[    1.253209] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.288427] ata3.00: unexpected _GTF length (8)
[    1.293234] ata3.00: configured for UDMA/133
[    1.308417] scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HM500JI  2AC1 PQ: 0 ANSI: 5
[    1.308554] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    1.308582] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.308668] sd 2:0:0:0: [sda] Write Protect is off
[    1.308670] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.308727] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.309063]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[    1.456655] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.489155] firewire_core: created device fw0: GUID 00023f7bbc400164, S400
[    1.632048] usb 7-1: new full speed USB device using uhci_hcd and address 2
[    1.819723] usbcore: registered new interface driver hiddev
[    1.824022] input: Microsoft Microsoft® Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.0/input/input4
[    1.824104] generic-usb 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® Nano Transceiver v2.0] on usb-0000:00:1d.2-1/input0
[    1.832244] input: Microsoft Microsoft® Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.1/input/input5
[    1.832331] generic-usb 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® Nano Transceiver v2.0] on usb-0000:00:1d.2-1/input1
[    1.858769] input: Microsoft Microsoft® Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.2/input/input6
[    1.858875] generic-usb 0003:045E:0745.0003: input,hiddev96,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® Nano Transceiver v2.0] on usb-0000:00:1d.2-1/input2
[    1.858892] usbcore: registered new interface driver usbhid
[    1.858894] usbhid: USB HID core driver
[    1.921106] scsi 5:0:0:0: Direct-Access     USB2.0   Mobile Disk      1.00 PQ: 0 ANSI: 2
[    1.921697] sd 5:0:0:0: Attached scsi generic sg2 type 0
[    1.922543] sd 5:0:0:0: [sdb] 4030463 512-byte logical blocks: (2.06 GB/1.92 GiB)
[    1.923056] sd 5:0:0:0: [sdb] Write Protect is off
[    1.923061] sd 5:0:0:0: [sdb] Mode Sense: 00 00 00 00
[    1.923066] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[    1.925426] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[    1.925432]  sdb: sdb1
[    2.031787] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[    2.031790] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[    3.081896] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   80.081036] udev[380]: starting version 163
[   80.163195] Adding 2611196k swap on /dev/sda6.  Priority:-1 extents:1 across:2611196k
[   80.215743] Linux agpgart interface v0.103
[   80.217417] lp: driver loaded but no devices found
[   80.222132] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[   80.223288] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[   80.368935] compal-laptop: Identified laptop model 'FL91/IFL91'.
[   80.373378] Linux video capture interface: v2.00
[   80.375729] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[   80.385115] compal-laptop: driver 0.2.6 successfully loaded.
[   80.420562] cfg80211: Calling CRDA to update world regulatory domain
[   80.421674] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b018)
[   80.428308] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input7
[   80.428692] usbcore: registered new interface driver uvcvideo
[   80.428695] USB Video Class driver (v0.1.0)
[   80.430477] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   80.482129] cfg80211: World regulatory domain updated:
[   80.482133]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   80.482136]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   80.482139]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   80.482141]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   80.482144]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   80.482147]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   80.490297] [drm] Initialized drm 1.1.0 20060810
[   80.496099] type=1400 audit(1293699918.499:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=671 comm="apparmor_parser"
[   80.496789] type=1400 audit(1293699918.499:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=671 comm="apparmor_parser"
[   80.497164] type=1400 audit(1293699918.503:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=671 comm="apparmor_parser"
[   80.584104] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   80.584110] i915 0000:00:02.0: setting latency timer to 64
[   80.596552] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[   80.596555] iwlagn: Copyright(c) 2003-2010 Intel Corporation
[   80.596650] iwlagn 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   80.596678] iwlagn 0000:0c:00.0: setting latency timer to 64
[   80.596737] iwlagn 0000:0c:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4
[   80.665967]   alloc irq_desc for 47 on node -1
[   80.665971]   alloc kstat_irqs on node -1
[   80.665980] i915 0000:00:02.0: irq 47 for MSI/MSI-X
[   80.665992] [drm] set up 7M of stolen space
[   80.674046] iwlagn 0000:0c:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
[   80.674134]   alloc irq_desc for 48 on node -1
[   80.674137]   alloc kstat_irqs on node -1
[   80.674174] iwlagn 0000:0c:00.0: irq 48 for MSI/MSI-X
[   80.738864] iwlagn 0000:0c:00.0: loaded firmware version 228.61.2.24
[   80.755925] phy0: Selected rate control algorithm 'iwl-agn-rs'
[   80.771819] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   80.772132] [drm] initialized overlay support
[   80.860314] psmouse serio1: ID: 10 00 64
[   81.077390] Skipping EDID probe due to cached edid
[   81.135949] elantech: assuming hardware version 1, firmware version 2.0.4
[   81.165750]   alloc irq_desc for 49 on node -1
[   81.165753]   alloc kstat_irqs on node -1
[   81.165784] tg3 0000:04:00.0: irq 49 for MSI/MSI-X
[   81.168286] type=1400 audit(1293699919.171:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=908 comm="apparmor_parser"
[   81.171699] type=1400 audit(1293699919.171:6): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=910 comm="apparmor_parser"
[   81.181408] type=1400 audit(1293699919.183:7): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=910 comm="apparmor_parser"
[   81.186800] type=1400 audit(1293699919.187:8): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=910 comm="apparmor_parser"
[   81.195389] type=1400 audit(1293699919.195:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=912 comm="apparmor_parser"
[   81.196336] type=1400 audit(1293699919.199:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=912 comm="apparmor_parser"
[   81.199273] type=1400 audit(1293699919.199:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=909 comm="apparmor_parser"
[   81.201132] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   81.248429] elantech: Synaptics capabilities query result 0x10, 0x02, 0x64.
[   81.493282] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   81.521426] Console: switching to colour frame buffer device 180x56
[   81.526118] fb0: inteldrmfb frame buffer device
[   81.526119] drm: registered panic notifier
[   81.526122] Slow work thread pool: Starting up
[   81.526203] Slow work thread pool: Ready
[   81.565318] acpi device:07: registered as cooling_device2
[   81.565570] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8
[   81.565629] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   81.565666] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   81.566118]   alloc irq_desc for 20 on node -1
[   81.566121]   alloc kstat_irqs on node -1
[   81.566128] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[   81.566188]   alloc irq_desc for 50 on node -1
[   81.566190]   alloc kstat_irqs on node -1
[   81.566201] HDA Intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[   81.566241] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   81.623175] hda_codec: ALC268: BIOS auto-probing.
[   81.689060] Skipping EDID probe due to cached edid
[   81.946055] ppdev: user-space parallel port driver
[   81.997329] input: ETPS/2 Elantech `imleçsürer` as /devices/platform/i8042/serio1/input/input9
[   82.465153] Skipping EDID probe due to cached edid
[   82.817144] Skipping EDID probe due to cached edid
[   83.845098] Skipping EDID probe due to cached edid
[   84.205124] Skipping EDID probe due to cached edid
[   84.577083] Skipping EDID probe due to cached edid
[   84.929077] Skipping EDID probe due to cached edid
[   87.045092] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[   92.008044] Skipping EDID probe due to cached edid
[   92.368080] Skipping EDID probe due to cached edid
[   92.720064] Skipping EDID probe due to cached edid
[   93.076081] Skipping EDID probe due to cached edid
[   94.216048] Skipping EDID probe due to cached edid
[   97.800095] Skipping EDID probe due to cached edid
[   98.368112] Skipping EDID probe due to cached edid
[  112.305217] wlan0: authenticate with 00:15:e9:ba:ff:50 (try 1)
[  112.307218] wlan0: authenticated
[  112.307240] wlan0: associate with 00:15:e9:ba:ff:50 (try 1)
[  112.309896] wlan0: RX AssocResp from 00:15:e9:ba:ff:50 (capab=0x421 status=0 aid=77)
[  112.309900] wlan0: associated
[  112.345603] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  112.345663] cfg80211: Calling CRDA for country: GB
[  112.349834] cfg80211: Received country IE:
[  112.349837] cfg80211: Regulatory domain: GB
[  112.349839]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  112.349842]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (10000 mBi, 1800 mBm)
[  112.349844] cfg80211: CRDA thinks this should applied:
[  112.349846] cfg80211: Regulatory domain: GB
[  112.349847]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  112.349850]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  112.349852]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  112.349855]     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  112.349857]     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[  112.349859] cfg80211: We intersect both of these and get:
[  112.349861] cfg80211: Regulatory domain: 98
[  112.349862]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  112.349864]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 1800 mBm)
[  112.349869] cfg80211: Leaving channel 5180 MHz intact on phy0 - no rule found in band on Country IE
[  112.349871] cfg80211: Leaving channel 5200 MHz intact on phy0 - no rule found in band on Country IE
[  112.349874] cfg80211: Leaving channel 5220 MHz intact on phy0 - no rule found in band on Country IE
[  112.349876] cfg80211: Leaving channel 5240 MHz intact on phy0 - no rule found in band on Country IE
[  112.349878] cfg80211: Leaving channel 5260 MHz intact on phy0 - no rule found in band on Country IE
[  112.349881] cfg80211: Leaving channel 5280 MHz intact on phy0 - no rule found in band on Country IE
[  112.349883] cfg80211: Leaving channel 5300 MHz intact on phy0 - no rule found in band on Country IE
[  112.349885] cfg80211: Leaving channel 5320 MHz intact on phy0 - no rule found in band on Country IE
[  112.349887] cfg80211: Leaving channel 5500 MHz intact on phy0 - no rule found in band on Country IE
[  112.349890] cfg80211: Leaving channel 5520 MHz intact on phy0 - no rule found in band on Country IE
[  112.349892] cfg80211: Leaving channel 5540 MHz intact on phy0 - no rule found in band on Country IE
[  112.349894] cfg80211: Leaving channel 5560 MHz intact on phy0 - no rule found in band on Country IE
[  112.349896] cfg80211: Leaving channel 5580 MHz intact on phy0 - no rule found in band on Country IE
[  112.349899] cfg80211: Leaving channel 5600 MHz intact on phy0 - no rule found in band on Country IE
[  112.349901] cfg80211: Leaving channel 5620 MHz intact on phy0 - no rule found in band on Country IE
[  112.349903] cfg80211: Leaving channel 5640 MHz intact on phy0 - no rule found in band on Country IE
[  112.349906] cfg80211: Leaving channel 5660 MHz intact on phy0 - no rule found in band on Country IE
[  112.349908] cfg80211: Leaving channel 5680 MHz intact on phy0 - no rule found in band on Country IE
[  112.349910] cfg80211: Leaving channel 5700 MHz intact on phy0 - no rule found in band on Country IE
[  112.349913] cfg80211: Current regulatory domain updated by AP to: GB
[  112.349915]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  112.349918]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 1800 mBm)
[  123.249216] wlan0: no IPv6 routers present
[  145.828351] ACPI: EC: GPE storm detected, transactions will use polling mode
[  208.487721] iwlagn 0000:0c:00.0: Microcode SW error detected.  Restarting 0x82000000.
[  208.487733] iwlagn 0000:0c:00.0: Loaded firmware version: 228.61.2.24
[  208.487775] iwlagn 0000:0c:00.0: Start IWL Error Log Dump:
[  208.487783] iwlagn 0000:0c:00.0: Status: 0x000213E4, count: 5
[  208.488057] iwlagn 0000:0c:00.0: Desc                               Time       data1      data2      line
[  208.488070] iwlagn 0000:0c:00.0: NMI_INTERRUPT_WDG            (#04) 2789384450 0x00000002 0x03630000 208
[  208.488078] iwlagn 0000:0c:00.0: pc      blink1  blink2  ilink1  ilink2  hcmd
[  208.488088] iwlagn 0000:0c:00.0: 0x0046C 0x02F3E 0x004C2 0x006DE 0x02FCE 0x234001C
[  208.488095] iwlagn 0000:0c:00.0: FH register values:
[  208.488140] iwlagn 0000:0c:00.0:         FH_RSCSR_CHNL0_STTS_WPTR_REG: 0X03412900
[  208.488183] iwlagn 0000:0c:00.0:        FH_RSCSR_CHNL0_RBDCB_BASE_REG: 0X00345df0
[  208.488223] iwlagn 0000:0c:00.0:                  FH_RSCSR_CHNL0_WPTR: 0X000000d0
[  208.488263] iwlagn 0000:0c:00.0:         FH_MEM_RCSR_CHNL0_CONFIG_REG: 0X80819004
[  208.488303] iwlagn 0000:0c:00.0:          FH_MEM_RSSR_SHARED_CTRL_REG: 0X0000003c
[  208.488343] iwlagn 0000:0c:00.0:            FH_MEM_RSSR_RX_STATUS_REG: 0X03630000
[  208.488384] iwlagn 0000:0c:00.0:    FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV: 0X00000000
[  208.488424] iwlagn 0000:0c:00.0:                FH_TSSR_TX_STATUS_REG: 0X07ff0002
[  208.488464] iwlagn 0000:0c:00.0:                 FH_TSSR_TX_ERROR_REG: 0X00000000
[  208.488551] iwlagn 0000:0c:00.0: Start IWL Event Log Dump: display last 20 entries
[  208.488596] iwlagn 0000:0c:00.0: EVT_LOGT:2789184071:0x00000000:0320
[  208.488643] iwlagn 0000:0c:00.0: EVT_LOGT:2789184151:0x00000000:0320
[  208.488678] iwlagn 0000:0c:00.0: EVT_LOGT:2789184224:0x00000000:0320
[  208.488713] iwlagn 0000:0c:00.0: EVT_LOGT:2789184287:0x00000000:0320
[  208.488749] iwlagn 0000:0c:00.0: EVT_LOGT:2789184311:0x00000000:0320
[  208.488784] iwlagn 0000:0c:00.0: EVT_LOGT:2789184359:0x00000000:0320
[  208.488820] iwlagn 0000:0c:00.0: EVT_LOGT:2789184393:0x000002b3:0501
[  208.488855] iwlagn 0000:0c:00.0: EVT_LOGT:2789184403:0x00000000:0504
[  208.488891] iwlagn 0000:0c:00.0: EVT_LOGT:2789184405:0x00000000:0504
[  208.488926] iwlagn 0000:0c:00.0: EVT_LOGT:2789184405:0xe5418c6b:0500
[  208.488961] iwlagn 0000:0c:00.0: EVT_LOGT:2789184406:0xe5418c6b:0600
[  208.488996] iwlagn 0000:0c:00.0: EVT_LOGT:2789184407:0x00000000:0600
[  208.489043] iwlagn 0000:0c:00.0: EVT_LOGT:2789184412:0x000000c3:0310
[  208.489078] iwlagn 0000:0c:00.0: EVT_LOGT:2789184422:0x0000010d:0600
[  208.489114] iwlagn 0000:0c:00.0: EVT_LOGT:2789184428:0x0000000b:0631
[  208.489149] iwlagn 0000:0c:00.0: EVT_LOGT:2789184433:0xe540012c:0630
[  208.489185] iwlagn 0000:0c:00.0: EVT_LOGT:2789184434:0xe5818254:0630
[  208.489221] iwlagn 0000:0c:00.0: EVT_LOGT:2789184440:0x000000f1:1055
[  208.489256] iwlagn 0000:0c:00.0: EVT_LOGT:2789184441:0xe5418c47:1066
[  208.489291] iwlagn 0000:0c:00.0: EVT_LOGT:2789384472:0x00000000:0125




Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 30 Aralık 2010 - 11:11:46

e ye bastığımda ise splash ya da kısmı yoktu


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 30 Aralık 2010 - 11:21:39

Açılırken e ye bastğımda :
başlık: gnu grup version 1.98 20100804-5ubuntu3
recordfail
insmod port-msdos
insmod ext2
set root='(hda,msdos5)'
search--no-floppy--fs-uuid--set cfca62fo-......\cag
linux /boot/wmlinuz-2.635-22-generic root=uuid=cfca62f0-04 .../initrd/boot/inirid.img-2.6.3..generic

zeitgeist

Özgürlüğü ne kadar anlarsan o kadar az sahip olursun. John Fowles

bytan

Fstab dosyanın içeriğini görebilir miyiz? Güncellemeleri alıyor musun?

gedit /etc/fstab
Umut en büyük kötülüktür; işkenceyi uzatır. - F.N.


Bir şey ne ise odur, bu kadar. Öyleyse, iki şey arasında bağdaşıklık varsa, bu aralarında iletişim kuruyorlar demek değildir.
"... kavrayışını bilgi ile derinleştir ..."
PF @ ST

Enna


Bu durum bende de var ve ben bunu normal karşılıyorum. Şuna dikkat ettim; o beklediğin 27 saniyelik sürenin sonunda bende bluetooth wireless ışıkları yanmaya başlıyor. Ben bunların sistemi beklettiğini düşündüm çünkü dokunmatik tuşların ışıkları yandığı anda ubuntu devreye giriyor hemen. Aynı durum eskiden windowsta da vardı ama onda 10 saniye kadar sürüyordu, windowsun açılmasıyla birlikte 55 saniye sürüyordu. Belki bir yararı olur diye yazdım.


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 30 Aralık 2010 - 22:05:58

# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    nodev,noexec,nosuid 0       0
/dev/sda1       /               ext4    errors=remount-ro 0       1
/dev/sda5       none            swap    sw              0       0

Bu benim çıktım.

heartsmagic

@gomugomuno, işte e'ye bastığında linux ile başlayan satırların sonuna doğru quiet veya splash kısımlarını görmüyor musun?
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?


Böylece yalan, dünyanın düzenine dönüştürülüyor.

Enna

 Ben quiet ve splash kelimelerini sildim , sonra tekrar control x ile boot ettim yazılar aktı aktı aktı 2 kere duraksadı sonra bir daha aktı tutamadım  :)  Oraları kaydetmenin bir yolu var mı?

heartsmagic

Tutamayacak kadar hızlı geçiyorsa zaten sorun yoktur. Başta da söylediğim gibi 28-30 saniye çok makul bir süre.
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?


Böylece yalan, dünyanın düzenine dönüştürülüyor.

gomugomuno

heartsmagic ben daha önce kullanmadım linux tabanlı işletim sistemi yani  quiet veya splash nedir bilmiyorum. tahmin ettim etikettir diye , yanılmışım. Sorunu çözdüm : bios ayarlarından  hdd nin sata özelliğini disable yaptım oldu


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 06 Ocak 2011 - 23:05:46

İlgilenen , yardımc olmaya çalışan herkese çok teşekkür ederim.