ubuntu açılmıyor..

[vedia]

S.A.

herkese iyi günler..
evdeki pc de ubuntu 8.04 var.her şey iyiydi dün akşam virtualbox yükledim ve virtualbox kernel modul diye bir şey daha ekledim sonra pc yeniden başladıgında açlış ekranınıda çok bekliyor ve kullanıcı adı şifre ekranına gelmiyor bir türlü recovery modda açıp virtualbox ile yüklediğim 2 programıda kaldırdım hata halen devam ediyordu bir türlü normal açılışta giriş ekranına gelmiyor
pc evde ve bende suan itibariyle iş yerindeyim.
acaba sorun ne olabilir yada hata düzeltme diye bir işlem varmı ubuntuda.
yada sorun la iligili ne yapabilirim ..
teşekkürler..

[zeitgeist]

Grub menüsünde eski kerneller varsa onlarla sistemi açabiliyor musun?

[vedia]

evet..gecikmelide olsa açılıyor bir kaç enter tusuna basarak açılıyor..

[zeitgeist]

Bir kaç enter dan kastın nedir; uyarılar mı çıkıyor? Eğer öyleyse ne tür uyarılar?

[vedia]

uyarı falan görmüyorum sadece kullanıcı şifre ekranına gelmeden çıkan bir ekran var orda sona dogru beklerken enter yapıyorum öyle geçiyor kullanıcı şifre ekranına .enter yapmasam bekliyorum o şekil..enter yapmasam kyllanıcı adı şifre ekanı gelmiyor.

[bytan]

Alttakinin çıktıları nedir?

Kod Seç Genişlet

dmesg | tail
dmesg

[vedia]

s.a.

Kod Seç Genişlet

[   53.190809] wlan0: associated
[   53.194383] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   61.098888] CPU0 attaching NULL sched-domain.
[   61.098893] CPU1 attaching NULL sched-domain.
[   61.128827] CPU0 attaching sched-domain:
[   61.128835]  domain 0: span 03
[   61.128838]   groups: 01 02
[   61.128844] CPU1 attaching sched-domain:
[   61.128847]  domain 0: span 03
[   61.128849]   groups: 02 01

Kod Seç Genişlet

[   18.201313] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[   18.202083] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[   18.202755] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[   18.203431] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[   18.204181] Linux Plug and Play Support v0.97 (c) Adam Belay
[   18.204259] pnp: PnP ACPI init
[   18.204319] ACPI: bus type pnp registered
[   18.206740] pnp: PnP ACPI: found 9 devices
[   18.206863] ACPI: ACPI bus type pnp unregistered
[   18.206986] PnPBIOS: Disabled by ACPI PNP
[   18.207283] PCI: Using ACPI for IRQ routing
[   18.207404] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   18.207517] ACPI: EC: non-query interrupt received, switching to interrupt mode
[   18.328758] NET: Registered protocol family 8
[   18.328813] NET: Registered protocol family 20
[   18.328895] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[   18.329128] hpet0: 3 64-bit timers, 14318180 Hz
[   18.330213] AppArmor: AppArmor Filesystem Enabled
[   18.332747] Time: tsc clocksource has been installed.
[   18.332808] Switched to high resolution mode on CPU 0
[   18.332945] Switched to high resolution mode on CPU 1
[   18.348707] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
[   18.348775] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
[   18.348841] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
[   18.349685] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
[   18.349752] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[   18.349818] system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
[   18.349885] system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved
[   18.349951] system 00:01: iomem range 0xff80000-0xff8ffff could not be reserved
[   18.350021] system 00:03: iomem range 0xfed00000-0xfed003ff could not be reserved
[   18.350091] system 00:05: ioport range 0x800-0x80f has been reserved
[   18.350150] system 00:05: ioport range 0x1000-0x107f has been reserved
[   18.350208] system 00:05: ioport range 0x1180-0x11bf has been reserved
[   18.350266] system 00:05: ioport range 0xfe00-0xfe00 has been reserved
[   18.380597] PCI: Bridge: 0000:00:01.0
[   18.380655]   IO window: 2000-2fff
[   18.380712]   MEM window: f0200000-f02fffff
[   18.380769]   PREFETCH window: d0000000-dfffffff
[   18.380827] PCI: Bridge: 0000:00:1c.0
[   18.380883]   IO window: disabled.
[   18.380942]   MEM window: f0300000-f03fffff
[   18.381000]   PREFETCH window: disabled.
[   18.381060] PCI: Bridge: 0000:00:1c.1
[   18.381117]   IO window: 3000-3fff
[   18.381176]   MEM window: f0400000-f04fffff
[   18.381235]   PREFETCH window: disabled.
[   18.381295] PCI: Bridge: 0000:00:1c.3
[   18.381349]   IO window: disabled.
[   18.381408]   MEM window: disabled.
[   18.381465]   PREFETCH window: disabled.
[   18.381525] PCI: Bridge: 0000:00:1e.0
[   18.381579]   IO window: disabled.
[   18.381638]   MEM window: f0500000-f05fffff
[   18.381697]   PREFETCH window: disabled.
[   18.381767] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[   18.381879] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   18.381902] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[   18.382015] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   18.382037] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
[   18.382150] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   18.382174] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 18
[   18.382287] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[   18.382300] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   18.382310] NET: Registered protocol family 2
[   18.424600] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   18.424830] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[   18.425276] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   18.425526] TCP: Hash tables configured (established 131072 bind 65536)
[   18.425584] TCP reno registered
[   18.436644] checking if image is initramfs... it is
[   18.984847] Freeing initrd memory: 7699k freed
[   18.985047] Simple Boot Flag at 0x36 set to 0x1
[   18.985596] audit: initializing netlink socket (disabled)
[   18.985664] audit(1273080329.345:1): initialized
[   18.985892] highmem bounce pool size: 64 pages
[   18.987427] VFS: Disk quotas dquot_6.5.1
[   18.987541] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   18.987708] io scheduler noop registered
[   18.987763] io scheduler anticipatory registered
[   18.987819] io scheduler deadline registered
[   18.987882] io scheduler cfq registered (default)
[   18.988075] Boot video device is 0000:01:00.0
[   18.988165] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   18.988200] assign_interrupt_mode Found MSI capability
[   18.988285] Allocate Port Service[0000:00:01.0:pcie00]
[   18.988311] Allocate Port Service[0000:00:01.0:pcie02]
[   18.988379] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   18.988439] assign_interrupt_mode Found MSI capability
[   18.988541] Allocate Port Service[0000:00:1c.0:pcie00]
[   18.988564] Allocate Port Service[0000:00:1c.0:pcie02]
[   18.988657] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   18.988715] assign_interrupt_mode Found MSI capability
[   18.988816] Allocate Port Service[0000:00:1c.1:pcie00]
[   18.988842] Allocate Port Service[0000:00:1c.1:pcie02]
[   18.988937] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[   18.988996] assign_interrupt_mode Found MSI capability
[   18.989097] Allocate Port Service[0000:00:1c.3:pcie00]
[   18.989121] Allocate Port Service[0000:00:1c.3:pcie02]
[   18.989340] isapnp: Scanning for PnP cards...
[   19.343252] isapnp: No Plug & Play device found
[   19.362202] Real Time Clock Driver v1.12ac
[   19.362458] hpet_resources: 0xfed00000 is busy
[   19.362482] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   19.363443] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   19.363559] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   19.363696] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[   19.366456] i8042.c: Detected active multiplexing controller, rev 1.1.
[   19.367726] serio: i8042 KBD port at 0x60,0x64 irq 1
[   19.367784] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[   19.367844] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[   19.367902] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[   19.367960] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[   19.386984] mice: PS/2 mouse device common for all mice
[   19.387124] EISA: Probing bus 0 at eisa.0
[   19.387185] Cannot allocate resource for EISA slot 1
[   19.387243] Cannot allocate resource for EISA slot 2
[   19.387299] Cannot allocate resource for EISA slot 3
[   19.387376] EISA: Detected 0 cards.
[   19.387431] cpuidle: using governor ladder
[   19.387486] cpuidle: using governor menu
[   19.387608] NET: Registered protocol family 1
[   19.387684] Using IPI No-Shortcut mode
[   19.387763] registered taskstats version 1
[   19.387918]   Magic number: 10:545:440
[   19.388027]   hash matches device 0000:00:1c.1
[   19.388092] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   19.388150] EDD information not available.
[   19.388389] Freeing unused kernel memory: 368k freed
[   19.415111] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   19.542235] fuse init (API version 7.9)
[   19.557403] ACPI: SSDT 7FED3C63, 0238 (r1  PmRef  Cpu0Ist     3000 INTL 20061109)
[   19.557768] ACPI: SSDT 7FED35E7, 05F7 (r1  PmRef  Cpu0Cst     3001 INTL 20061109)
[   19.559514] Monitor-Mwait will be used to enter C-1 state
[   19.559516] Monitor-Mwait will be used to enter C-2 state
[   19.559518] Monitor-Mwait will be used to enter C-3 state
[   19.559619] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[   19.559853] ACPI: Processor [CPU0] (supports 8 throttling states)
[   19.560185] ACPI: SSDT 7FED3E9B, 00C8 (r1  PmRef  Cpu1Ist     3000 INTL 20061109)
[   19.560526] ACPI: SSDT 7FED3BDE, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20061109)
[   19.561569] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[   19.561804] ACPI: Processor [CPU1] (supports 8 throttling states)
[   19.565770] ACPI: Thermal Zone [THRM] (24 C)
[   19.705519] usbcore: registered new interface driver usbfs
[   19.705600] usbcore: registered new interface driver hub
[   19.713427] usbcore: registered new device driver usb
[   19.714658] USB Universal Host Controller Interface driver v3.0
[   19.714763] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[   19.714882] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[   19.714886] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[   19.715154] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[   19.715253] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[   19.715448] usb usb1: configuration #1 chosen from 1 choice
[   19.715523] hub 1-0:1.0: USB hub found
[   19.715582] hub 1-0:1.0: 2 ports detected
[   19.819326] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 19
[   19.819451] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[   19.819455] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[   19.819531] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[   19.819627] uhci_hcd 0000:00:1a.1: irq 19, io base 0x00001820
[   19.819776] usb usb2: configuration #1 chosen from 1 choice
[   19.819850] hub 2-0:1.0: USB hub found
[   19.819907] hub 2-0:1.0: 2 ports detected
[   19.923032] SCSI subsystem initialized
[   19.923125] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
[   19.923251] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   19.923256] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   19.923341] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[   19.923452] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001840
[   19.923616] usb usb3: configuration #1 chosen from 1 choice
[   19.923694] hub 3-0:1.0: USB hub found
[   19.923751] hub 3-0:1.0: 2 ports detected
[   19.934053] libata version 3.00 loaded.
[   20.026952] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
[   20.027074] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   20.027079] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   20.027156] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[   20.027251] uhci_hcd 0000:00:1d.1: irq 18, io base 0x00001860
[   20.027401] usb usb4: configuration #1 chosen from 1 choice
[   20.027476] hub 4-0:1.0: USB hub found
[   20.027534] hub 4-0:1.0: 2 ports detected
[   20.130763] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 21
[   20.130885] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   20.130889] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   20.130964] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
[   20.131059] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00001880
[   20.131211] usb usb5: configuration #1 chosen from 1 choice
[   20.131285] hub 5-0:1.0: USB hub found
[   20.131342] hub 5-0:1.0: 2 ports detected
[   20.234707] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 21
[   20.234836] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[   20.234840] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[   20.234918] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
[   20.239699] ehci_hcd 0000:00:1a.7: debug port 1
[   20.239759] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[   20.239765] ehci_hcd 0000:00:1a.7: irq 21, io mem 0xf0604800
[   20.257465] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   20.257625] usb usb6: configuration #1 chosen from 1 choice
[   20.257700] hub 6-0:1.0: USB hub found
[   20.257759] hub 6-0:1.0: 4 ports detected
[   20.361456] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
[   20.361614] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   20.361617] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   20.361693] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[   20.365672] ehci_hcd 0000:00:1d.7: debug port 1
[   20.365733] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[   20.365738] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf0604c00
[   20.377282] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   20.377537] usb usb7: configuration #1 chosen from 1 choice
[   20.377644] hub 7-0:1.0: USB hub found
[   20.377718] hub 7-0:1.0: 6 ports detected
[   20.481263] ACPI: PCI Interrupt 0000:0a:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[   20.532013] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16]  MMIO=[f0501000-f05017ff]  Max Packet=[2048]  IR/IT contexts=[8/8]
[   20.534181] ahci 0000:00:1f.2: version 3.0
[   20.534206] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18
[   20.636801] Clocksource tsc unstable (delta = -2181829461 ns)
[   20.640791] Time: hpet clocksource has been installed.
[   20.824492] usb 7-3: new high speed USB device using ehci_hcd and address 2
[   20.970994] usb 7-3: configuration #1 chosen from 1 choice
[   21.340603] usb 2-2: new low speed USB device using uhci_hcd and address 2
[   21.539279] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[   21.539348] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
[   21.539419] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[   21.539626] scsi0 : ahci
[   21.539830] scsi1 : ahci
[   21.539979] scsi2 : ahci
[   21.540101] ata1: SATA max UDMA/133 abar m2048@0xf0604000 port 0xf0604100 irq 219
[   21.540173] ata2: SATA max UDMA/133 abar m2048@0xf0604000 port 0xf0604180 irq 219
[   21.540242] ata3: SATA max UDMA/133 abar m2048@0xf0604000 port 0xf0604200 irq 219
[   21.543040] usb 2-2: configuration #1 chosen from 1 choice
[   21.560772] usbcore: registered new interface driver hiddev
[   21.600022] input: HID 04d9:0499 as /devices/pci0000:00/0000:00:1a.1/usb2/2-2/2-2:1.0/input/input2
[   21.608161] input,hidraw0: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:1a.1-2
[   21.608414] usbcore: registered new interface driver usbhid
[   21.608473] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   21.802925] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[001b24000104e688]
[   22.014441] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   22.403102] ata1.00: ATA-8: TOSHIBA MK2546GSX, LB013M, max UDMA/100
[   22.403161] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[   22.404093] ata1.00: configured for UDMA/100
[   22.591374] ata2: SATA link down (SStatus 0 SControl 300)
[   22.611296] ata3: SATA link down (SStatus 0 SControl 300)
[   22.611581] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK2546GS LB01 PQ: 0 ANSI: 5
[   22.611903] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 18
[   22.612044] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[   22.612056] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[   22.616240] ata_piix 0000:00:1f.1: version 2.12
[   22.616254] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 18
[   22.616397] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[   22.616451] scsi3 : ata_piix
[   22.616552] scsi4 : ata_piix
[   22.617079] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
[   22.617139] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
[   22.617814] Driver 'sd' needs updating - please use bus_type methods
[   22.621444] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[   22.621533] sd 0:0:0:0: [sda] Write Protect is off
[   22.621605] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   22.621619] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   22.621723] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[   22.621788] sd 0:0:0:0: [sda] Write Protect is off
[   22.621845] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   22.621857] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   22.621926]  sda: sda1 sda2 sda3 sda4
[   22.728907] sd 0:0:0:0: [sda] Attached SCSI disk
[   22.733137] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   22.896475] Attempting manual resume
[   22.896533] swsusp: Resume From Partition 8:4
[   22.896534] PM: Checking swsusp image.
[   22.896693] PM: Resume from disk failed.
[   22.909414] EXT3-fs: INFO: recovery required on readonly filesystem.
[   22.909478] EXT3-fs: write access will be enabled during recovery.
[   22.929118] ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-T40N, JT03, max UDMA/33
[   23.036779] kjournald starting.  Commit interval 5 seconds
[   23.036810] EXT3-fs: recovery complete.
[   23.037350] EXT3-fs: mounted filesystem with ordered data mode.
[   23.099738] ata4.00: configured for UDMA/33
[   23.099884] ata5: port disabled. ignoring.
[   23.103545] scsi 3:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T40N  JT03 PQ: 0 ANSI: 5
[   23.103733] scsi 3:0:0:0: Attached scsi generic sg1 type 5
[   30.392796] input: PC Speaker as /devices/platform/pcspkr/input/input3
[   30.409053] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   30.419614] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   30.431173] iTCO_vendor_support: vendor-support=0
[   30.432437] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[   30.490508] input: Power Button (FF) as /devices/virtual/input/input4
[   30.510479] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
[   30.510577] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   30.510708] Linux agpgart interface v0.102
[   30.574307] ACPI: Power Button (FF) [PWRF]
[   30.574422] input: Lid Switch as /devices/virtual/input/input5
[   30.606322] ACPI: Lid Switch [LID]
[   30.606430] input: Power Button (CM) as /devices/virtual/input/input6
[   30.670107] ACPI: Power Button (CM) [PWRB]
[   30.916257] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   30.942131] [fglrx] Maximum main memory to use for locked dma buffers: 1898 MBytes.
[   30.942235] [fglrx] ASYNCIO init succeed!
[   30.943114] [fglrx] PAT is enabled successfully!
[   30.943192] [fglrx] module loaded - fglrx 8.47.3 [Feb 25 2008] on minor 0
[   31.106514] Driver 'sr' needs updating - please use bus_type methods
[   31.125215] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[   31.125299] Uniform CD-ROM driver Revision: 3.20
[   31.125402] sr 3:0:0:0: Attached scsi CD-ROM sr0
[   31.193291] ACPI: Battery Slot [BAT1] (battery present)
[   31.240371] ACPI: AC Adapter [ACAD] (off-line)
[   31.246178] ACPI: WMI-Acer: Mapper loaded
[   31.285809] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[   31.285951] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   31.291608] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.0
[   31.291685] iwl3945: Copyright(c) 2003-2007 Intel Corporation
[   31.305911] sdhci: Secure Digital Host Controller Interface driver
[   31.305980] sdhci: Copyright(c) Pierre Ossman
[   31.348422] Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1e0b1, caps: 0xd04711/0xa00000
[   31.348499] synaptics: Toshiba Satellite A300 detected, limiting rate to 40pps.
[   31.350510] ACPI: PCI Interrupt 0000:01:00.1[B] -> GSI 17 (level, low) -> IRQ 17
[   31.350652] PCI: Setting latency timer of device 0000:01:00.1 to 64
[   31.352339] Linux video capture interface: v2.00
[   31.383744] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
[   31.397366] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   31.397502] PCI: Setting latency timer of device 0000:02:00.0 to 64
[   31.397520] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[   31.420148] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b008)
[   31.422220] usbcore: registered new interface driver uvcvideo
[   31.422284] USB Video Class driver (v0.1.0)
[   31.748191] ACPI: EC: missing address confirmation, don't expect it any longer.
[   31.748609] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input8
[   31.796154] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   31.890566] sdhci: SDHCI controller found at 0000:0a:01.2 [1217:7120] (rev 2)
[   31.890650] ACPI: PCI Interrupt 0000:0a:01.2[A] -> GSI 16 (level, low) -> IRQ 16
[   31.890770] sdhci:slot0: Unknown controller version (2). You may experience problems.
[   31.890875] mmc0: SDHCI at 0xf0500800 irq 16 DMA
[   31.995405] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
[   31.997368] wmaster0: Selected rate control algorithm 'iwl-3945-rs'
[   32.062657] lp: driver loaded but no devices found
[   32.138468] Adding 6401892k swap on /dev/sda4.  Priority:-1 extents:1 across:6401892k
[   32.158830] EXT3 FS on sda1, internal journal
[   32.413878] kjournald starting.  Commit interval 5 seconds
[   32.414090] EXT3 FS on sda3, internal journal
[   32.414094] EXT3-fs: recovery complete.
[   32.414099] EXT3-fs: mounted filesystem with ordered data mode.
[   32.502575] kjournald starting.  Commit interval 5 seconds
[   32.502779] EXT3 FS on sda2, internal journal
[   32.502784] EXT3-fs: recovery complete.
[   32.503026] EXT3-fs: mounted filesystem with ordered data mode.
[   32.792392] ip_tables: (C) 2000-2006 Netfilter Core Team
[   33.811651] No dock devices found.
[   34.655460] apm: BIOS not found.
[   34.861040] ppdev: user-space parallel port driver
[   35.022581] audit(1273080361.377:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5361 profile="/usr/sbin/cupsd" namespace="default"
[   35.927606] Bluetooth: Core ver 2.11
[   35.927998] NET: Registered protocol family 31
[   35.928003] Bluetooth: HCI device and connection manager initialized
[   35.928008] Bluetooth: HCI socket layer initialized
[   35.941951] Bluetooth: L2CAP ver 2.9
[   35.941957] Bluetooth: L2CAP socket layer initialized
[   36.000007] Bluetooth: RFCOMM socket layer initialized
[   36.000019] Bluetooth: RFCOMM TTY layer initialized
[   36.000020] Bluetooth: RFCOMM ver 1.8
[   36.783572] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   38.955193] [fglrx] Reserve Block - 0 offset =  0Xfffc000 length = 0X4000
[   38.955198] [fglrx] Reserve Block - 1 offset =  0X0 length = 0X1000000
[   38.955200] [fglrx] Reserve Block - 2 offset =  0Xff7b000 length = 0X80000
[   39.269507] [fglrx] interrupt source ff000034 successfully enabled
[   39.269517] [fglrx] enable ID = 0x00000006
[   39.269528] [fglrx] Receive enable interrupt message with irqEnableMask: ff000034
[   39.269619] [fglrx] interrupt source 10000000 successfully enabled
[   39.269623] [fglrx] enable ID = 0x00000007
[   39.269630] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000
[   39.285276] [fglrx] interrupt source 60000001 successfully enabled
[   39.285284] [fglrx] enable ID = 0x00000008
[   39.285292] [fglrx] Receive enable interrupt message with irqEnableMask: 60000001
[   39.285377] [fglrx] interrupt source 00000040 successfully enabled
[   39.285381] [fglrx] enable ID = 0x00000009
[   39.285388] [fglrx] Receive enable interrupt message with irqEnableMask: 00000040
[   39.292941] [fglrx] interrupt source 80020000 successfully enabled
[   39.292947] [fglrx] enable ID = 0x0000000A
[   39.292953] [fglrx] Receive enable interrupt message with irqEnableMask: 80020000
[   39.293020] [fglrx] interrupt source 20000400 successfully enabled
[   39.293024] [fglrx] enable ID = 0x0000000B
[   39.293031] [fglrx] Receive enable interrupt message with irqEnableMask: 20000400
[   44.276096] NET: Registered protocol family 10
[   44.276536] lo: Disabled Privacy Extensions
[   44.277505] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   48.357307] CPU0 attaching NULL sched-domain.
[   48.357317] CPU1 attaching NULL sched-domain.
[   48.365375] CPU0 attaching sched-domain:
[   48.365383]  domain 0: span 03
[   48.365387]   groups: 01 02
[   48.365392]   domain 1: span 03
[   48.365395]    groups: 03
[   48.365399] CPU1 attaching sched-domain:
[   48.365401]  domain 0: span 03
[   48.365405]   groups: 02 01
[   48.365410]   domain 1: span 03
[   48.365413]    groups: 03
[   51.526612] NET: Registered protocol family 17
[   53.187207] wlan0: Initial auth_alg=0
[   53.187216] wlan0: authenticate with AP 00:12:bf:5b:3f:ba
[   53.188296] wlan0: RX authentication from 00:12:bf:5b:3f:ba (alg=0 transaction=2 status=0)
[   53.188302] wlan0: authenticated
[   53.188306] wlan0: associate with AP 00:12:bf:5b:3f:ba
[   53.190803] wlan0: RX AssocResp from 00:12:bf:5b:3f:ba (capab=0x471 status=0 aid=1)
[   53.190809] wlan0: associated
[   53.194383] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   61.098888] CPU0 attaching NULL sched-domain.
[   61.098893] CPU1 attaching NULL sched-domain.
[   61.128827] CPU0 attaching sched-domain:
[   61.128835]  domain 0: span 03
[   61.128838]   groups: 01 02
[   61.128844] CPU1 attaching sched-domain:
[   61.128847]  domain 0: span 03
[   61.128849]   groups: 02 01




Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 06 Mayıs 2010 - 09:41:38
s.a.
dün akşam 10.04 int indirdiğim dvd sürümü vardı taktım pc ye yükseltme çıktı bende yükselt dedim suan 10.04 oldu pc açılış problemi kalmadı.şuan normal açılıyor .. şimdilik sorun tşkler..