açılışta ses simgesi üzerinde kırmızı çarpı işareti ile açılıyor

[kalender]

merhaba arkadaşlar açılışta ses simgesi sessiz konumunda açılıyor açtıktan sonra sesi açıyorum ama pc tekrar açıldığında tekrar ses gitmiş oluyor sebebi ne olabilir alsa-base.conf içeriği aşağıda

# autoloader aliases
install sound-slot-0 /sbin/modprobe snd-card-0
install sound-slot-1 /sbin/modprobe snd-card-1
install sound-slot-2 /sbin/modprobe snd-card-2
install sound-slot-3 /sbin/modprobe snd-card-3
install sound-slot-4 /sbin/modprobe snd-card-4
install sound-slot-5 /sbin/modprobe snd-card-5
install sound-slot-6 /sbin/modprobe snd-card-6
install sound-slot-7 /sbin/modprobe snd-card-7

# Cause optional modules to be loaded above generic modules
install snd /sbin/modprobe --ignore-install snd $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-ioctl32 ; /sbin/modprobe --quiet --use-blacklist snd-seq ; }
#
# Workaround at bug #499695 (reverted in Ubuntu see LP #319505)
install snd-pcm /sbin/modprobe --ignore-install snd-pcm $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-pcm-oss ; : ; }
install snd-mixer /sbin/modprobe --ignore-install snd-mixer $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-mixer-oss ; : ; }
install snd-seq /sbin/modprobe --ignore-install snd-seq $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; /sbin/modprobe --quiet --use-blacklist snd-seq-oss ; : ; }
#
install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; }
# Cause optional modules to be loaded above sound card driver modules
install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-emu10k1-synth ; }
install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq ; }

# Load saa7134-alsa instead of saa7134 (which gets dragged in by it anyway)
install saa7134 /sbin/modprobe --ignore-install saa7134 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist saa7134-alsa ; : ; }
# Prevent abnormal drivers from grabbing index 0
options bt87x index=-2
options cx88_alsa index=-2
options saa7134-alsa index=-2
options snd-atiixp-modem index=-2
options snd-intel8x0m index=-2
options snd-via82xx-modem index=-2
options snd-usb-audio index=-2
options snd-usb-us122l index=-2
options snd-usb-usx2y index=-2
options snd-usb-caiaq index=-2
# Ubuntu #62691, enable MPU for snd-cmipci
options snd-cmipci mpu_port=0x330 fm_port=0x388
# Keep snd-pcsp from being loaded as first soundcard
options snd-pcsp index=-2
# Power down HDA controllers after 10 idle seconds
options snd-hda-intel power_save=10 power_save_controller=N

[Sherlock Holmes]

Kod Seç Genişlet

alsamixer



Burada istediğimiz ayarları yapıp,

Kod Seç Genişlet

sudo alsactl store
komutu ile öntanımlı olarak kaydettiğimizde, her açılışta bu değerler ile açılması gerekir.

[kalender]

@ğnome cevap için teşekkürler birinci komutu verip açılan pencerede ayarı yaptıktan sonra komutu veremiyorum çünkü komut satırı kayboluyor komut satırına dönmek için pencereyi kapatıyorum bu seferde ikinci komutta hata alıyorum

Kod Seç Genişlet

Home directory /home/samet not ours.
samet@samet-desktop:~$


ayrıca bu açılış yönergeleriyle alakalı bir sorun değil kapanış yönergeleriyle alakalı çünkü reset attım ses simgesi normal şekliyle geldi aynı şekilde oturumu sonlandırıp tekrar giriş yaptım gene normal geldi oturumu klavye kısayonuldan sonlandırdım(altgr+prtsrn+k)

[6ng4n]

alsa mixerdan çıkmak için ESCye basmalısın.
alsactl store komutunu sudo su yazıp yönetici konsoluna geçtikten sonra deneyebilirsin veya sudo su yazabilirsin.çünkü ev dizini ile ilgili bir hata.

[xwes]

yanliş mesaj...

[kalender]

alsa mixerdan çıkmak için ESCye basmalısın.
alsactl store komutunu sudo su yazıp yönetici konsoluna geçtikten sonra deneyebilirsin veya sudo su yazabilirsin.çünkü ev dizini ile ilgili bir hata.

buraya kadar doğru aynen dediğini yaptım önce sudo su ile root oldum alsamixer i açtım ses seviyesi en aşağıda idi en baştaki iki kolonu yukarı doğru çektim fakat bu esnada ses simgesi üzerindeki kırmızı çarpı gitmedi esc ile çıkış yaptım sonra alsactl store ile kayıt ettim herhangi bir hata vermedi ama kırmızı çarpı hala duruyordu ses ayarlarında ne yaparsam yapayım sessiz(mute) işaretli olarak açılıyor, ama dediğim gibi sorun kapanışta, reset atarsam seste bir sorun yok


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 12 Kasım 2009 - 23:28:46
arkadaşlar işin doğrusu zaten alsamixeri de ben yüklemedim winetricks ile directx9 u kurdum bir baktım bildirim alanında ikinci bir ses simgesi belirdi daha sonra ctrl+alt+backspace i etkinleştirmeye çalışırken aşağıdaki linkte verilmiş olan aşağıdaki kodları /etc/X11/xorg.conf dosyasına kaydettim sonrasında sistemi açamadım

http://forum.ubuntu-tr.net/index.php?topic=7795.0

Kod Seç Genişlet

Section "ServerFlags"
        Option  "DontZap"       "False"
EndSection

sistem açılışta konsola düştü startx ile başlatmayı denedim başlatamadı ve bir log dosyası oluşturdu log dosyasının içeriği aşağıdadır daha sonra xorg.conf dosyasını vi ile açıp eklediğim satırları sildim sistemi tekrar açabildim fakat bu seferde ses üzerinde kırmızı çarpı şimdi gülermisin ağlarmısın:) log dosyasının adı xorg.0.log

Kod Seç Genişlet


X.Org X Server 1.6.4
Release Date: 2009-9-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-23-server i686 Ubuntu
Current Operating System: Linux ubuntu 2.6.31-14-generic #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 i686
Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/xubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- debian-installer/language=tr console-setup/layoutcode?=tr
Build Date: 26 October 2009  05:15:02PM
xorg-server 2:1.6.4-2ubuntu4 (buildd@)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov 11 21:14:30 2009
(II) Loader magic: 0x3bc0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0:1:0:0) 10de:0161:0000:0000 nVidia Corporation NV44 [GeForce 6200 TurboCache(TM)] rev 161, Mem @ 0xc0000000/16777216, 0x40000000/536870912, 0xb0000000/16777216, BIOS @ 0x????????/131072
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default nv Device 0"
Driver "nv"
EndSection
Section "Screen"
Identifier "Builtin Default nv Screen 0"
Device "Builtin Default nv Device 0"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default nv Screen 0"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default nv Screen 0" (0)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default nv Device 0"
(==) No monitor specified for screen "Builtin Default nv Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nv"
(II) Loading /usr/lib/xorg/modules/drivers//nv_drv.so
(II) Module nv: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 2.1.14
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 2.2.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers//fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 0.4.0
ABI class: X.Org Video Driver, version 5.0
(II) NV: driver for NVIDIA chipsets:  RIVA 128,  RIVA TNT,  RIVA TNT2,
RIVA TNT2 Ultra,  Unknown TNT2,  Vanta,  RIVA TNT2 Model 64,
GeForce 6800 Ultra,  GeForce 6800,  GeForce 6800 LE,
GeForce 6800 XE,  GeForce 6800 XT,  GeForce 6800 GT,
GeForce 6800 GT,  GeForce 6800 GS,  GeForce 6800 XT,
Quadro FX 4000,  GeForce 7800 GTX,  GeForce 7800 GTX,
GeForce 7800 GT,  GeForce 7800 GS,  GeForce 7800 SLI,
GeForce Go 7800,  GeForce Go 7800 GTX,  Quadro FX 4500,
Aladdin TNT2,  GeForce 6800 GS,  GeForce 6800,  GeForce 6800 LE,
GeForce 6800 XT,  GeForce Go 6800,  GeForce Go 6800 Ultra,
Quadro FX Go1400,  Quadro FX 3450/4000 SDI,  Quadro FX 1400,
GeForce 256,  GeForce DDR,  Quadro,  GeForce2 MX/MX 400,
GeForce2 MX 100/200,  GeForce2 Go,  Quadro2 MXR/EX/Go,
GeForce 6600 GT,  GeForce 6600,  GeForce 6600 LE,  GeForce 6600 VE,
GeForce Go 6600,  GeForce 6610 XL,  GeForce Go 6600 TE/6200 TE,
GeForce 6700 XL,  GeForce Go 6600,  GeForce Go 6600 GT,
Quadro NVS 440,  Quadro FX 550,  Quadro FX 550,  Quadro FX 540,
GeForce 6200,  GeForce2 GTS,  GeForce2 Ti,  GeForce2 Ultra,
Quadro2 Pro,  GeForce 6500,  GeForce 6200 TurboCache(TM),
GeForce 6200SE TurboCache(TM),  GeForce 6200 LE,  GeForce Go 6200,
Quadro NVS 285,  GeForce Go 6400,  GeForce Go 6200,
GeForce Go 6400,  GeForce 6250,  GeForce 7100 GS,  GeForce4 MX 460,
GeForce4 MX 440,  GeForce4 MX 420,  GeForce4 MX 440-SE,
GeForce4 440 Go,  GeForce4 420 Go,  GeForce4 420 Go 32M,
GeForce4 460 Go,  Quadro4 550 XGL,  GeForce4 440 Go 64M,
Quadro NVS,  Quadro4 500 GoGL,  GeForce4 410 Go 16M,
GeForce4 MX 440 with AGP8X,  GeForce4 MX 440SE with AGP8X,
GeForce4 MX 420 with AGP8X,  GeForce4 MX 4000,  GeForce4 448 Go,
GeForce4 488 Go,  Quadro4 580 XGL,  Quadro4 NVS 280 SD,
Quadro4 380 XGL,  Quadro NVS 50 PCI,  GeForce4 448 Go,
GeForce 8800 GTX,  GeForce 8800 GTS,  GeForce 8800 Ultra,
Quadro FX 5600,  Quadro FX 4600,  GeForce2 Integrated GPU,
GeForce 7350 LE,  GeForce 7300 LE,  GeForce 7300 SE,
GeForce Go 7200,  GeForce Go 7300,  GeForce Go 7400,
GeForce Go 7400 GS,  Quadro NVS 110M,  Quadro NVS 120M,
Quadro FX 350M,  GeForce 7500 LE,  Quadro FX 350,  GeForce 7300 GS,
GeForce4 MX Integrated GPU,  GeForce3,  GeForce3 Ti 200,
GeForce3 Ti 500,  Quadro DCC,  GeForce 6800,  GeForce 6800 LE,
GeForce 6800 GT,  GeForce 6800 XT,  GeForce 6200,
GeForce 6200 A-LE,  GeForce 6150,  GeForce 6150 LE,  GeForce 6100,
GeForce Go 6150,  Quadro NVS 210S / NVIDIA GeForce 6150LE,
GeForce Go 6100,  GeForce4 Ti 4600,  GeForce4 Ti 4400,
GeForce4 Ti 4200,  Quadro4 900 XGL,  Quadro4 750 XGL,
Quadro4 700 XGL,  GeForce4 Ti 4800,  GeForce4 Ti 4200 with AGP8X,
GeForce4 Ti 4800 SE,  GeForce4 4200 Go,  Quadro4 980 XGL,
Quadro4 780 XGL,  Quadro4 700 GoGL,  GeForce 7900 GTX,
GeForce 7900 GT,  GeForce 7900 GS,  GeForce 7950 GX2,
GeForce 7950 GX2,  GeForce 7950 GT},  GeForce Go 7950 GTX,
GeForce Go 7900 GS,  GeForce Go 7900 GTX,  Quadro FX 2500M,
Quadro FX 1500M,  Quadro FX 5500,  Quadro FX 3500,  Quadro FX 1500,
Quadro FX 4500 X2,  GeForce FX 5800 Ultra,  GeForce FX 5800,
Quadro FX 2000,  Quadro FX 1000,  GeForce FX 5600 Ultra,
GeForce FX 5600,  GeForce FX 560T,  GeForce FX Go5600,
GeForce FX Go5650,  Quadro FX Go700,  GeForce FX 5200,
GeForce FX 5200 Ultra,  GeForce FX 5200,  GeForce FX 5200LE,
GeForce FX Go5200,  GeForce FX Go5250,  GeForce FX 5500,
GeForce FX 5100,  GeForce FX Go5200 32M/64M,  Quadro NVS 55/280 PCI,
Quadro FX 500/600 PCI,  GeForce FX Go53xx Series,
GeForce FX Go5100,  GeForce FX 5900 Ultra,  GeForce FX 5900,
GeForce FX 590T,  GeForce FX 5950 Ultra,  GeForce FX 5900ZT,
Quadro FX 3000,  Quadro FX 700,  GeForce FX 5700 Ultra,
GeForce FX 5700,  GeForce FX 5700LE,  GeForce FX 5700VE,
GeForce FX Go5700,  GeForce FX Go5700,  Quadro FX Go1000,
Quadro FX 1100,  GeForce 7650 GS,  GeForce 7600 GT,
GeForce 7600 GS,  GeForce 7300 GT,  GeForce 7600 LE,
GeForce 7300 GT,  GeForce Go 7700,  GeForce Go 7600,
GeForce Go 7600 GT},  Quadro NVS 300M,  GeForce Go 7900 SE,
Quadro FX 550M,  Quadro FX 560,  GeForce 6150SE,
GeForce 6100 nForce 405,  GeForce 6100 nForce 400,
GeForce 6100 nForce 420,  GeForce 8600 GTS,  GeForce 8600 GT,
GeForce 8600 GT,  GeForce 8600 GS,  GeForce 8400 GS,
GeForce 9500M GS,  GeForce 8600M GT,  GeForce 9650M GS,
GeForce 8700M GT,  Quadro FX 370,  Quadro NVS 320M,  Quadro FX 570M,
Quadro FX 1600M,  Quadro FX 570,  Quadro FX 1700,  GeForce 8400 SE,
GeForce 8500 GT,  GeForce 8400 GS,  GeForce 8300 GS,
GeForce 8400 GS,  GeForce 8600M GS,  GeForce 8400M GT,
GeForce 8400M GS,  GeForce 8400M G,  Quadro NVS 140M,
Quadro NVS 130M,  Quadro NVS 135M,  GeForce 9400 GT,
Quadro FX 360M,  GeForce 9300M G,  Quadro NVS 290,  GeForce GTX 295,
GeForce GTX 280,  GeForce GTX 260,  GeForce GTX 285,  GeForce 7050,
GeForce 7025,  Quadro CX,  Quadro FX 5800,  Quadro FX 4800,
Quadro FX 3800,  GeForce 8800 GTS 512,  GeForce 9800 GT,
GeForce 8800 GT,  GeForce 9800 GX2,  GeForce 9800 GT,
GeForce 8800 GS,  GeForce 9800M GTX,  GeForce 8800M GTS,
GeForce 9800M GT,  GeForce 8800M GTX,  GeForce 8800 GS,
GeForce 9600 GSO,  GeForce 8800 GT,  GeForce 9800 GTX,
GeForce 9800 GTX+,  GeForce 9800 GT,  GeForce GTS 250,
GeForce 9800M GTX,  Quadro FX 3700,  Quadro FX 3600M,
Quadro FX 3700M,  GeForce 9600 GT,  GeForce 9600 GS,
GeForce 9600 GSO 512,  GeForce GT 130,  GeForce GT 140,
GeForce 9800M GTS,  GeForce 9700M GTS,  GeForce 9800M GS,
GeForce 9800M GTS,  Quadro FX 1800,  Quadro FX 2700M,
GeForce 9500 GT,  GeForce 9400 GT,  GeForce 9500 GT,
GeForce GT 120,  GeForce 9600M GT,  GeForce 9600M GS,
GeForce 9600M GT,  GeForce 9700M GT,  GeForce 9500M G,
GeForce 9650M GT,  GeForce 9500 GT,  Quadro FX 380,  Quadro FX 580,
Quadro FX 770M,  GeForce 9300 GE,  GeForce 9300 GS,
GeForce 8400 GS,  GeForce 9300M GS,  GeForce G100,
GeForce 9200M GS,  GeForce 9300M GS,  Quadro NVS 150M,
Quadro NVS 160M,  Quadro NVS 420,  Quadro FX 370 LP,
Quadro NVS 450,  Quadro NVS 295
(II) VESA: driver for VESA chipsets: vesa
(II) FBDEV: driver for framebuffer: fbdev
(II) Primary Device is: PCI 01@00:00:0
(--) NV: Found NVIDIA  GeForce 6200 TurboCache(TM) at 01@00:00:0
(WW) Falling back to old probe method for vesa
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux//libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 0.0.2
ABI class: X.Org Video Driver, version 5.0
(EE) open /dev/fb0: No such file or directory
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) NV(0): Initializing int10
(II) NV(0): Primary V_BIOS segment is: 0xc000
(--) NV(0): Chipset: " GeForce 6200 TurboCache(TM)"
(II) NV(0): Creating default Display subsection in Screen section
"Builtin Default nv Screen 0" for depth/fbbpp 24/32
(==) NV(0): Depth 24, (--) framebuffer bpp 32
(==) NV(0): RGB weight 888
(==) NV(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(==) NV(0): Using HW cursor
(--) NV(0): Linear framebuffer at 0x40000000
(--) NV(0): MMIO registers at 0xC0000000
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) NV(0): I2C bus "DDC" initialized.
(II) NV(0): Probing for analog device on output A...
(--) NV(0):   ...found one
(II) NV(0): Probing for analog device on output B...
(--) NV(0):   ...can't find one
(II) NV(0): Probing for EDID on I2C bus A...
(II) NV(0): I2C device "DDC:E-EDID segment register" registered at address 0x60.
(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) NV(0):   ... none found
(II) NV(0): Probing for EDID on I2C bus B...
(--) NV(0): DDC detected a CRT:
(II) NV(0): Manufacturer: KTC  Model: 1550  Serial#: 24
(II) NV(0): Year: 2005  Week: 14
(II) NV(0): EDID Version: 1.1
(II) NV(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
(II) NV(0): Sync:  Separate
(II) NV(0): Max Image Size [cm]: horiz.: 30  vert.: 22
(II) NV(0): Gamma: 2.20
(II) NV(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) NV(0): redX: 0.597 redY: 0.343   greenX: 0.316 greenY: 0.566
(II) NV(0): blueX: 0.153 blueY: 0.131   whiteX: 0.313 whiteY: 0.329
(II) NV(0): Supported established timings:
(II) NV(0): 720x400@70Hz
(II) NV(0): 640x480@60Hz
(II) NV(0): 640x480@72Hz
(II) NV(0): 640x480@75Hz
(II) NV(0): 800x600@60Hz
(II) NV(0): 800x600@72Hz
(II) NV(0): 800x600@75Hz
(II) NV(0): 1024x768@60Hz
(II) NV(0): 1024x768@70Hz
(II) NV(0): 1024x768@75Hz
(II) NV(0): Manufacturer's mask: 0
(II) NV(0): Supported detailed timing:
(II) NV(0): clock: 25.2 MHz   Image Size:  304 x 228 mm
(II) NV(0): h_active: 640  h_sync: 688  h_sync_end 688 h_blank_end 800 h_border: 0
(II) NV(0): v_active: 350  v_sync: 409  v_sync_end 411 v_blanking: 399 v_border: 0
(II) NV(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 61 kHz, PixClock max 80 MHz
(II) NV(0): Monitor name: VESTEL V-5005
(II) NV(0): Monitor name: L
(II) NV(0): EDID (in hex):
(II) NV(0): 00ffffffffffff002e83501518000000
(II) NV(0): 0e0f0101681e1678e8f0659857519127
(II) NV(0): 215054adce0001010101010101010101
(II) NV(0): 010101010101d50980a0205e31103000
(II) NV(0): b20c30e41000001c000000fd00384b1f
(II) NV(0): 3d08000a202020202020000000fc0056
(II) NV(0): 455354454c20562d35303035000000fc
(II) NV(0): 004c0a20202020202020202020200099
(--) NV(0): CRTC 0 appears to have a CRT attached
(II) NV(0): Using CRT on CRTC 0
(II) NV(0): EDID vendor "KTC", prod id 5456
(II) NV(0): Using EDID range info for horizontal sync
(II) NV(0): Using EDID range info for vertical refresh
(II) NV(0): Printing DDC gathered Modelines:
(II) NV(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NV(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NV(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) NV(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NV(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NV(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) NV(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) NV(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NV(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NV(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(--) NV(0): VideoRAM: 262144 kBytes
(==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
(II) NV(0): <default monitor>: Using hsync range of 31.00-61.00 kHz
(II) NV(0): <default monitor>: Using vrefresh range of 56.00-75.00 Hz
(II) NV(0): <default monitor>: Using maximum pixel clock of 80.00 MHz
(II) NV(0): Estimated virtual size for aspect ratio 1.3636 is 1024x768
(II) NV(0): Clock range:  12.00 to 400.00 MHz
(II) NV(0): Not using default mode "640x350" (vrefresh out of range)
(II) NV(0): Not using default mode "320x175" (vrefresh out of range)
(II) NV(0): Not using default mode "640x400" (vrefresh out of range)
(II) NV(0): Not using default mode "320x200" (vrefresh out of range)
(II) NV(0): Not using default mode "720x400" (vrefresh out of range)
(II) NV(0): Not using default mode "360x200" (vrefresh out of range)
(II) NV(0): Not using default mode "640x480" (vrefresh out of range)
(II) NV(0): Not using default mode "320x240" (vrefresh out of range)
(II) NV(0): Not using default mode "800x600" (vrefresh out of range)
(II) NV(0): Not using default mode "400x300" (vrefresh out of range)
(II) NV(0): Not using default mode "1024x768" (vrefresh out of range)
(II) NV(0): Not using default mode "512x384" (vrefresh out of range)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "512x384" (hsync out of range)
(II) NV(0): Not using default mode "1152x864" (width too large for virtual size)
(II) NV(0): Not using default mode "576x432" (hsync out of range)
(II) NV(0): Not using default mode "1280x960" (width too large for virtual size)
(II) NV(0): Not using default mode "1280x960" (width too large for virtual size)
(II) NV(0): Not using default mode "640x480" (hsync out of range)
(II) NV(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) NV(0): Not using default mode "640x512" (hsync out of range)
(II) NV(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) NV(0): Not using default mode "640x512" (hsync out of range)
(II) NV(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) NV(0): Not using default mode "640x512" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1792x1344" (width too large for virtual size)
(II) NV(0): Not using default mode "896x672" (hsync out of range)
(II) NV(0): Not using default mode "1792x1344" (width too large for virtual size)
(II) NV(0): Not using default mode "896x672" (hsync out of range)
(II) NV(0): Not using default mode "1856x1392" (width too large for virtual size)
(II) NV(0): Not using default mode "928x696" (hsync out of range)
(II) NV(0): Not using default mode "1856x1392" (width too large for virtual size)
(II) NV(0): Not using default mode "928x696" (hsync out of range)
(II) NV(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) NV(0): Not using default mode "960x720" (hsync out of range)
(II) NV(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) NV(0): Not using default mode "960x720" (hsync out of range)
(II) NV(0): Not using default mode "1152x864" (width too large for virtual size)
(II) NV(0): Not using default mode "1152x864" (width too large for virtual size)
(II) NV(0): Not using default mode "576x432" (hsync out of range)
(II) NV(0): Not using default mode "1152x864" (width too large for virtual size)
(II) NV(0): Not using default mode "576x432" (hsync out of range)
(II) NV(0): Not using default mode "1152x864" (width too large for virtual size)
(II) NV(0): Not using default mode "576x432" (hsync out of range)
(II) NV(0): Not using default mode "1152x864" (width too large for virtual size)
(II) NV(0): Not using default mode "576x432" (hsync out of range)
(II) NV(0): Not using default mode "1152x864" (width too large for virtual size)
(II) NV(0): Not using default mode "576x432" (hsync out of range)
(II) NV(0): Not using default mode "1360x768" (width too large for virtual size)
(II) NV(0): Not using default mode "1360x768" (width too large for virtual size)
(II) NV(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) NV(0): Not using default mode "700x525" (hsync out of range)
(II) NV(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) NV(0): Not using default mode "700x525" (hsync out of range)
(II) NV(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) NV(0): Not using default mode "700x525" (hsync out of range)
(II) NV(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) NV(0): Not using default mode "700x525" (hsync out of range)
(II) NV(0): Not using default mode "1440x900" (width too large for virtual size)
(II) NV(0): Not using default mode "1600x1024" (width too large for virtual size)
(II) NV(0): Not using default mode "800x512" (hsync out of range)
(II) NV(0): Not using default mode "1680x1050" (width too large for virtual size)
(II) NV(0): Not using default mode "840x525" (hsync out of range)
(II) NV(0): Not using default mode "1680x1050" (width too large for virtual size)
(II) NV(0): Not using default mode "840x525" (hsync out of range)
(II) NV(0): Not using default mode "1680x1050" (width too large for virtual size)
(II) NV(0): Not using default mode "840x525" (hsync out of range)
(II) NV(0): Not using default mode "1680x1050" (width too large for virtual size)
(II) NV(0): Not using default mode "840x525" (hsync out of range)
(II) NV(0): Not using default mode "1680x1050" (width too large for virtual size)
(II) NV(0): Not using default mode "840x525" (hsync out of range)
(II) NV(0): Not using default mode "1920x1080" (width too large for virtual size)
(II) NV(0): Not using default mode "960x540" (hsync out of range)
(II) NV(0): Not using default mode "1920x1200" (width too large for virtual size)
(II) NV(0): Not using default mode "960x600" (hsync out of range)
(II) NV(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) NV(0): Not using default mode "960x720" (hsync out of range)
(II) NV(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(--) NV(0): Virtual size is 1024x768 (pitch 1024)
(**) NV(0): *Driver mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
(II) NV(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(**) NV(0): *Driver mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) NV(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(**) NV(0): *Driver mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) NV(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(**) NV(0): *Default mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
(II) NV(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(**) NV(0): *Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) NV(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(**) NV(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) NV(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(**) NV(0): *Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) NV(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(**) NV(0): *Driver mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) NV(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(**) NV(0): *Driver mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) NV(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(**) NV(0): *Driver mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) NV(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(**) NV(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) NV(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(**) NV(0): *Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) NV(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(**) NV(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) NV(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(**) NV(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) NV(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(**) NV(0): *Default mode "720x450": 53.2 MHz, 55.9 kHz, 59.9 Hz (D)
(II) NV(0): Modeline "720x450"x59.9   53.25  720 760 836 952  450 451 454 467 doublescan -hsync +vsync (55.9 kHz)
(**) NV(0): *Driver mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) NV(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(**) NV(0): *Driver mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) NV(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(**) NV(0): *Driver mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) NV(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(**) NV(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) NV(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(**) NV(0): *Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) NV(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(**) NV(0): *Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "640x480"x60.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz)
(**) NV(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) NV(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(**) NV(0): *Driver mode "720x400": 28.3 MHz, 31.5 kHz, 70.1 Hz
(II) NV(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(**) NV(0): *Default mode "680x384": 36.0 MHz, 47.4 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "680x384"x60.0   36.00  680 704 720 760  384 385 390 395 doublescan +hsync -vsync (47.4 kHz)
(**) NV(0): *Default mode "680x384": 42.4 MHz, 47.7 kHz, 59.8 Hz (D)
(II) NV(0): Modeline "680x384"x59.8   42.38  680 716 784 888  384 385 390 399 doublescan -hsync +vsync (47.7 kHz)
(**) NV(0): *Default mode "576x432": 40.8 MHz, 53.7 kHz, 60.1 Hz (D)
(II) NV(0): Modeline "576x432"x60.1   40.81  576 608 668 760  432 432 434 447 doublescan -hsync +vsync (53.7 kHz)
(**) NV(0): *Default mode "512x384": 39.4 MHz, 60.0 kHz, 75.0 Hz (D)
(II) NV(0): Modeline "512x384"x75.0   39.38  512 520 568 656  384 384 386 400 doublescan +hsync +vsync (60.0 kHz)
(**) NV(0): *Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(II) NV(0): Modeline "512x384"x70.1   37.50  512 524 592 664  384 385 388 403 doublescan -hsync -vsync (56.5 kHz)
(**) NV(0): *Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "512x384"x60.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz)
(**) NV(0): *Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(II) NV(0): Modeline "416x312"x74.7   28.64  416 432 464 576  312 312 314 333 doublescan -hsync -vsync (49.7 kHz)
(**) NV(0): *Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) NV(0): Modeline "400x300"x75.1   24.75  400 408 448 528  300 300 302 312 doublescan +hsync +vsync (46.9 kHz)
(**) NV(0): *Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) NV(0): Modeline "400x300"x72.2   25.00  400 428 488 520  300 318 321 333 doublescan +hsync +vsync (48.1 kHz)
(**) NV(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) NV(0): Modeline "400x300"x60.3   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz)
(**) NV(0): *Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) NV(0): Modeline "400x300"x56.3   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz)
(**) NV(0): *Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(II) NV(0): Modeline "320x240"x75.0   15.75  320 328 360 420  240 240 242 250 doublescan -hsync -vsync (37.5 kHz)
(**) NV(0): *Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(II) NV(0): Modeline "320x240"x72.8   15.75  320 332 352 416  240 244 246 260 doublescan -hsync -vsync (37.9 kHz)
(**) NV(0): *Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) NV(0): Modeline "320x240"x60.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz)
(**) NV(0): Display dimensions: (300, 220) mm
(**) NV(0): DPI set to (86, 88)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.2.1
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) UnloadModule: "fbdev"
(II) Unloading /usr/lib/xorg/modules/drivers//fbdev_drv.so
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/lib/xorg/modules/linux//libfbdevhw.so
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) NV(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(==) NV(0): Backing store disabled
(==) NV(0): Silken mouse enabled
(II) NV(0): DPMS enabled
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) config/hal: Adding input device Power Button
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 2.2.5
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "tr"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "tr"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event0"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "tr"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/hal: Adding input device ImExPS/2 Generic Explorer Mouse
(**) ImExPS/2 Generic Explorer Mouse: always reports core events
(**) ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event4"
(II) ImExPS/2 Generic Explorer Mouse: Found 9 mouse buttons
(II) ImExPS/2 Generic Explorer Mouse: Found x and y relative axes
(II) ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s)
(II) ImExPS/2 Generic Explorer Mouse: Configuring as mouse
(**) ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5
(**) ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE)
(**) ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1
(**) ImExPS/2 Generic Explorer Mouse: (accel) filter chain progression: 2.00
(**) ImExPS/2 Generic Explorer Mouse: (accel) filter stage 0: 20.00 ms
(**) ImExPS/2 Generic Explorer Mouse: (accel) set acceleration profile 0
(II) ImExPS/2 Generic Explorer Mouse: initialized for relative axes.
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event2"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.


[Sherlock Holmes]

Ses Tercihleri altında Donanım profillerinde bir değişiklik yaparak deneme yaptınızmı.?

Kod Seç Genişlet

sudo su

Kod Seç Genişlet

/sbin/alsa/ reload
çıktılarına alabilirmiyiz.?

[kalender]

samet@samet-desktop:~$ sudo su
[sudo] password for samet:
root@samet-desktop:/home/samet# /sbin/alsa/ reload
bash: /sbin/alsa/: Not a directory
root@samet-desktop:/home/samet#

Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 13 Kasım 2009 - 12:45:01
şöyle bir log çıktısı var 14. satırda beklenmedik dosya sonu diyor sanırsam ama xorg.confta bir sorun yok gibi onun çiçeriğide aşağıda

X.Org X Server 1.6.4
Release Date: 2009-9-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-23-server i686 Ubuntu
Current Operating System: Linux samet-desktop 2.6.31-14-generic #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 i686
Kernel command line: root=UUID=3b74a1de-f836-43b7-b7e6-3e7294d23382 ro quiet splash
Build Date: 26 October 2009  05:15:02PM
xorg-server 2:1.6.4-2ubuntu4 (buildd@)
   Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.5.log", Time: Thu Nov 12 23:42:40 2009
(==) Using config file: "/etc/X11/xorg.conf"
Parse error on line 14 of section Device in file /etc/X11/xorg.conf
   Unexpected EOF. Missing EndSection keyword?
(EE) Problem parsing the config file
(EE) Error parsing the config file

Fatal server error:
no screens found

Please consult the The X.Org Foundation support
    at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.5.log" for additional information.

(WW) xf86CloseConsole: KDSETMODE failed: Bad file descriptor
(WW) xf86CloseConsole: VT_GETMODE failed: Bad file descriptor
(WW) xf86OpenConsole: VT_GETSTATE failed: Bad file descriptor
ddxSigGiveUp: Closing log

Section "Screen"
   Identifier   "Default Screen"
   DefaultDepth   24
EndSection

Section "Module"
   Load   "glx"
EndSection

Section "Device"
   Identifier   "Default Device"
   Driver   "nvidia"
   Option   "NoLogo"   "True"
EndSection

[Sherlock Holmes]

şöyle bir fikrim var.
Bildirim alanındaki ses uygulamasını kaldırıp, direk panele eklemek.

Kod Seç Genişlet

gconf-editor /apps/notification-daemon/sound_enabled

ile bildirim alanından kaldırmış oluruz sesi, tabi tekrar başlatarak.  

Kod Seç Genişlet

sudo apt-get install gnome-pulse-applet
komutu sonrası panele ekleyeceğimiz uygulama PulseAudio Volume Control olacak.
Böylelikle kaydırma tuşları ile kontrol edebileceğimiz başka bir ses uygulaması elde etmiş oluruz.

Not:PulseAudio Control'e Mute dediğinizde çarpı işareti belirmiyor.

[kalender]

yalnız şöyle bir sorun var xubuntu 9.10 da gconf-editör yok birde direk panelden ses simgesine sağ tıklayıp kaldıramıyorum yani panelin bir parçası olmuş nasıl komple kaldırıp rekrar kurabilirim


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 13 Kasım 2009 - 04:42:09
bide şu var daha önce sistemi açamadığımda xorg.conf dosyasını yeniden oluşturma ile ilgili şu komutu vermiştim

Kod Seç Genişlet

sudo dpkg-reconfigure -phigh xserver-xorg


açılışta esc ye basıp recovery modu seçip çıkan ekranda root u seçip daha sonra bu komutu verdiğimde herhangi bir tepki sonuç almamıştım bunun sese bir etkisi var mı bilemiyorum herhalde bir yerde bir ayar değişti sessiz(mute) kutucuğu pc kapatılırken işaretlenyor bu hangi ayar dosyası olabilir


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 13 Kasım 2009 - 15:13:32
uygulamalar-çokluortam-ses düzenleyicisi ni açtığımda sol alttaki pencere açılıyor paneldeki ses simgesine sağ tıklayıp ses tercihleri dediğimde sağ üssteki pencere açılıyor

daha sonra ses simgesine tıklayıp çubuğu yukarı çektiğimde ikiside düzeliyor

[Sherlock Holmes]

@pcnet Xfce masaüstü kullandığını öğrenmem iyi oldu. 

Ne yazık'ki Xfce hakkında yeterli tecrübem yok,
fakat artık sebebim var. 
Deneyeceğim.