[Çözüldü] Ubuntu 19.10 Wifi Sorunu

[houseofcards]

Merhabalar çok acemi biri olarak yardımcı olursanız sevinirim, kablolu internete bağlanıyorum ama bir türlü
wifi den bağlanmayı beceremedim. Yardımcı olursanız sevinirim.

Kod Seç Genişlet

berk@berk-HP-Laptop-15-ra0xx:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=19.10
DISTRIB_CODENAME=eoan
DISTRIB_DESCRIPTION="Ubuntu 19.10"
berk@berk-HP-Laptop-15-ra0xx:~$


Kod Seç Genişlet

berk@berk-HP-Laptop-15-ra0xx:~$ cat /proc/cmdline
BOOT_IMAGE=/boot/vmlinuz-5.3.0-26-generic root=UUID=ba1d51e4-3144-4a3f-93e3-9a01e9085f73 ro quiet splash vt.handoff=7


Kod Seç Genişlet

berk@berk-HP-Laptop-15-ra0xx:~$ uname -a
Linux berk-HP-Laptop-15-ra0xx 5.3.0-26-generic #28-Ubuntu SMP Wed Dec 18 05:37:46 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux


Kod Seç Genişlet

berk@berk-HP-Laptop-15-ra0xx:~$ lspci
00:00.0 Host bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SoC Transaction Register (rev 35)
00:02.0 VGA compatible controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller (rev 35)
00:0b.0 Signal processing controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Power Management Controller (rev 35)
00:13.0 SATA controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SATA Controller (rev 35)
00:14.0 USB controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series USB xHCI Controller (rev 35)
00:1a.0 Encryption controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Trusted Execution Engine (rev 35)
00:1b.0 Audio device: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series High Definition Audio Controller (rev 35)
00:1c.0 PCI bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Express Port #1 (rev 35)
00:1c.2 PCI bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Express Port #3 (rev 35)
00:1c.3 PCI bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Express Port #4 (rev 35)
00:1f.0 ISA bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCU (rev 35)
00:1f.3 SMBus: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx SMBus Controller (rev 35)
02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8723DE 802.11b/g/n PCIe Adapter
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)


Kod Seç Genişlet

berk@berk-HP-Laptop-15-ra0xx:~$ lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 0bda:b009 Realtek Semiconductor Corp.
Bus 001 Device 004: ID 05c8:0233 Cheng Uei Precision Industry Co., Ltd (Foxlink) USB Optical Mouse
Bus 001 Device 003: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 001 Device 002: ID 1bcf:0005 Sunplus Innovation Technology Inc. Optical Mouse
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
berk@berk-HP-Laptop-15-ra0xx:~$


Kod Seç Genişlet

berk@berk-HP-Laptop-15-ra0xx:~$ rfkill list
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no


Kod Seç Genişlet

berk@berk-HP-Laptop-15-ra0xx:~$ sudo lshw -C network
[sudo] password for berk:
  *-network UNCLAIMED       
       açıklama: Network controller
       ürün: RTL8723DE 802.11b/g/n PCIe Adapter
       üretici: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:02:00.0
       sürüm: 00
       genişlik: 64 bits
       saat: 33MHz
       kapasiteler: pm msi pciexpress cap_list
       yapılandırma: latency=0
       kaynaklar: ioport:2000(boyut=256) bellek:91100000-9110ffff
  *-network
       açıklama: Eternet interface
       ürün: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
       üretici: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:03:00.0
       mantıksal ad: eno1
       sürüm: 15
       serial: 04:0e:3c:f2:f1:d9
       boyut: 1Gbit/s
       kapasite: 1Gbit/s
       genişlik: 64 bits
       saat: 33MHz
       kapasiteler: pm msi pciexpress msix bus_master cap_list eternet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
       yapılandırma: autonegotiation=on broadcast=yes driver=r8169 duplex=full firmware=rtl8168h-2_0.0.2 02/26/15 ip=192.168.1.8 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s
       kaynaklar: irq:19 ioport:1000(boyut=256) bellek:91004000-91004fff bellek:91000000-91003fff

Kod Seç Genişlet

berk@berk-HP-Laptop-15-ra0xx:~$ ifconfig

'ifconfig'  komutu sistemde bulunamadı. Ama şununla kurulabilir:

sudo apt install net-tools



Kod Seç Genişlet

berk@berk-HP-Laptop-15-ra0xx:~$ iwconfig
lo        no wireless extensions.

eno1      no wireless extensions.


Kod Seç Genişlet

berk@berk-HP-Laptop-15-ra0xx:~$ iwlist scanning
lo        Interface doesn't support scanning.

eno1      Interface doesn't support scanning.



Kod Seç Genişlet

berk@berk-HP-Laptop-15-ra0xx:~$ lsmod
Module                  Size  Used by
bnep                   24576  2
nls_iso8859_1          16384  1
snd_hda_codec_hdmi     61440  1
snd_hda_codec_realtek   118784  1
snd_hda_codec_generic    81920  1 snd_hda_codec_realtek
ledtrig_audio          16384  2 snd_hda_codec_generic,snd_hda_codec_realtek
intel_powerclamp       20480  0
coretemp               20480  0
kvm                   651264  0
irqbypass              16384  1 kvm
snd_hda_intel          49152  3
snd_hda_codec         131072  4 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_realtek
punit_atom_debug       16384  0
snd_hda_core           90112  5 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek
snd_hwdep              20480  1 snd_hda_codec
crct10dif_pclmul       16384  1
crc32_pclmul           16384  0
ghash_clmulni_intel    16384  0
snd_pcm               106496  4 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_core
btusb                  57344  0
mei_hdcp               24576  0
intel_rapl_msr         20480  0
aesni_intel           372736  0
uvcvideo               98304  0
snd_seq_midi           20480  0
snd_seq_midi_event     16384  1 snd_seq_midi
snd_rawmidi            36864  1 snd_seq_midi
aes_x86_64             20480  1 aesni_intel
crypto_simd            16384  1 aesni_intel
cryptd                 24576  2 crypto_simd,ghash_clmulni_intel
btrtl                  20480  1 btusb
btbcm                  16384  1 btusb
btintel                24576  1 btusb
snd_seq                69632  2 snd_seq_midi,snd_seq_midi_event
bluetooth             581632  12 btrtl,btintel,btbcm,bnep,btusb
videobuf2_vmalloc      20480  1 uvcvideo
videobuf2_memops       20480  1 videobuf2_vmalloc
videobuf2_v4l2         24576  1 uvcvideo
glue_helper            16384  1 aesni_intel
ecdh_generic           16384  1 bluetooth
i915                 1949696  11
ecc                    28672  1 ecdh_generic
videobuf2_common       53248  2 videobuf2_v4l2,uvcvideo
videodev              208896  3 videobuf2_v4l2,uvcvideo,videobuf2_common
kxcjk_1013             28672  0
snd_seq_device         16384  3 snd_seq,snd_seq_midi,snd_rawmidi
intel_cstate           20480  0
snd_timer              36864  2 snd_seq,snd_pcm
snd                    86016  17 snd_hda_codec_generic,snd_seq,snd_seq_device,snd_hda_codec_hdmi,snd_hwdep,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek,snd_timer,snd_pcm,snd_rawmidi
drm_kms_helper        184320  1 i915
mc                     53248  4 videodev,videobuf2_v4l2,uvcvideo,videobuf2_common
cfg80211              712704  0
soundcore              16384  1 snd
industrialio_triggered_buffer    16384  1 kxcjk_1013
intel_xhci_usb_role_switch    16384  0
roles                  16384  1 intel_xhci_usb_role_switch
processor_thermal_device    20480  0
intel_rapl_common      24576  2 intel_rapl_msr,processor_thermal_device
kfifo_buf              16384  1 industrialio_triggered_buffer
hp_wmi                 16384  0
intel_soc_dts_iosf     20480  1 processor_thermal_device
mei_txe                28672  1
drm                   491520  5 drm_kms_helper,i915
mei                   110592  3 mei_hdcp,mei_txe
i2c_algo_bit           16384  1 i915
fb_sys_fops            16384  1 drm_kms_helper
syscopyarea            16384  1 drm_kms_helper
sysfillrect            16384  1 drm_kms_helper
joydev                 28672  0
input_leds             16384  0
serio_raw              20480  0
sysimgblt              16384  1 drm_kms_helper
sparse_keymap          16384  1 hp_wmi
industrialio           77824  3 industrialio_triggered_buffer,kfifo_buf,kxcjk_1013
wmi_bmof               16384  0
mac_hid                16384  0
int3403_thermal        16384  0
int3400_thermal        20480  0
int340x_thermal_zone    16384  2 int3403_thermal,processor_thermal_device
acpi_thermal_rel       16384  1 int3400_thermal
hp_wireless            16384  0
intel_int0002_vgpio    16384  1
sch_fq_codel           20480  2
parport_pc             40960  0
ppdev                  24576  0
lp                     20480  0
parport                53248  3 parport_pc,lp,ppdev
ip_tables              32768  0
x_tables               40960  1 ip_tables
autofs4                45056  2
hid_generic            16384  0
usbhid                 57344  0
hid                   131072  2 usbhid,hid_generic
psmouse               155648  0
i2c_i801               32768  0
lpc_ich                24576  0
r8169                  81920  0
realtek                20480  1
wmi                    32768  2 hp_wmi,wmi_bmof
ahci                   40960  2
libahci                32768  1 ahci
video                  49152  1 i915
berk@berk-HP-Laptop-15-ra0xx:~$


Kod Seç Genişlet

berk@berk-HP-Laptop-15-ra0xx:~$ dmesg
[    0.000000] Linux version 5.3.0-26-generic (buildd@lgw01-amd64-013) (gcc version 9.2.1 20191008 (Ubuntu 9.2.1-9ubuntu2)) #28-Ubuntu SMP Wed Dec 18 05:37:46 UTC 2019 (Ubuntu 5.3.0-26.28-generic 5.3.13)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-26-generic root=UUID=ba1d51e4-3144-4a3f-93e3-9a01e9085f73 ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai 
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000085fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000086000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000007a40efff] usable
[    0.000000] BIOS-e820: [mem 0x000000007a40f000-0x000000007aebefff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007aebf000-0x000000007bfbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007bfbf000-0x000000007bffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007bfff000-0x000000007bffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0x742e0018-0x742f0057] usable ==> usable
[    0.000000] e820: update [mem 0x742e0018-0x742f0057] usable ==> usable
[    0.000000] e820: update [mem 0x742d1018-0x742df057] usable ==> usable
[    0.000000] e820: update [mem 0x742d1018-0x742df057] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000006efff] usable
[    0.000000] reserve setup_data: [mem 0x000000000006f000-0x000000000006ffff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x0000000000070000-0x0000000000085fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000086000-0x000000000009ffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000020200000-0x00000000742d1017] usable
[    0.000000] reserve setup_data: [mem 0x00000000742d1018-0x00000000742df057] usable
[    0.000000] reserve setup_data: [mem 0x00000000742df058-0x00000000742e0017] usable
[    0.000000] reserve setup_data: [mem 0x00000000742e0018-0x00000000742f0057] usable
[    0.000000] reserve setup_data: [mem 0x00000000742f0058-0x000000007a40efff] usable
[    0.000000] reserve setup_data: [mem 0x000000007a40f000-0x000000007aebefff] reserved
[    0.000000] reserve setup_data: [mem 0x000000007aebf000-0x000000007bfbefff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000007bfbf000-0x000000007bffefff] ACPI data
[    0.000000] reserve setup_data: [mem 0x000000007bfff000-0x000000007bffffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000017fffffff] usable
[    0.000000] efi: EFI v2.40 by INSYDE Corp.
[    0.000000] efi:  ACPI 2.0=0x7bffe014  SMBIOS=0x7a63e000  SMBIOS 3.0=0x7a63c000  ESRT=0x7a63ac18  TPMEventLog=0x742f1018
[    0.000000] secureboot: Secure boot enabled
[    0.000000] Kernel is locked down from EFI secure boot; see man kernel_lockdown.7
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: HP HP Laptop 15-ra0xx/832C, BIOS F.61 08/29/2019
[    0.000000] tsc: Detected 1600.000 MHz processor
[    0.000214] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000218] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000233] last_pfn = 0x180000 max_arch_pfn = 0x400000000
[    0.000240] MTRR default type: uncachable
[    0.000242] MTRR fixed ranges enabled:
[    0.000245]   00000-9FFFF write-back
[    0.000248]   A0000-FFFFF write-protect
[    0.000251] MTRR variable ranges enabled:
[    0.000255]   0 base 0FFC00000 mask FFFC00000 write-protect
[    0.000257]   1 base 0FFA00000 mask FFFE00000 write-protect
[    0.000260]   2 base 000000000 mask F80000000 write-back
[    0.000263]   3 base 07E000000 mask FFE000000 uncachable
[    0.000266]   4 base 07D000000 mask FFF000000 uncachable
[    0.000269]   5 base 07C800000 mask FFF800000 uncachable
[    0.000272]   6 base 07C400000 mask FFFC00000 uncachable
[    0.000274]   7 base 100000000 mask F80000000 write-back
[    0.000398] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT 
[    0.000528] last_pfn = 0x7c000 max_arch_pfn = 0x400000000
[    0.014105] esrt: Reserving ESRT space from 0x000000007a63ac18 to 0x000000007a63ac50.
[    0.014138] check: Scanning 1 areas for low memory corruption
[    0.014152] BRK [0x165c01000, 0x165c01fff] PGTABLE
[    0.014158] BRK [0x165c02000, 0x165c02fff] PGTABLE
[    0.014161] BRK [0x165c03000, 0x165c03fff] PGTABLE
[    0.014390] BRK [0x165c04000, 0x165c04fff] PGTABLE
[    0.014395] BRK [0x165c05000, 0x165c05fff] PGTABLE
[    0.015089] BRK [0x165c06000, 0x165c06fff] PGTABLE
[    0.015271] BRK [0x165c07000, 0x165c07fff] PGTABLE
[    0.015587] BRK [0x165c08000, 0x165c08fff] PGTABLE
[    0.015748] BRK [0x165c09000, 0x165c09fff] PGTABLE
[    0.015989] RAMDISK: [mem 0x3d266000-0x3fffdfff]
[    0.016008] ACPI: Early table checksum verification disabled
[    0.016017] ACPI: RSDP 0x000000007BFFE014 000024 (v02 HPQOEM)
[    0.016024] ACPI: XSDT 0x000000007BFFE120 0000BC (v01 HPQOEM SLIC-MPC 00000003 HP   01000013)
[    0.016037] ACPI: FACP 0x000000007BFF1000 00010C (v05 HPQOEM SLIC-MPC 00000003 HP   00040000)
[    0.016051] ACPI: DSDT 0x000000007BFE1000 00C063 (v02 HPQOEM SLIC-MPC 00000003 ACPI 00040000)
[    0.016059] ACPI: FACS 0x000000007BFBA000 000040
[    0.016066] ACPI: UEFI 0x000000007BFFD000 000236 (v01 HPQOEM INSYDE   00000001 HP   00040000)
[    0.016074] ACPI: MSDM 0x000000007BFFC000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP   00040000)
[    0.016082] ACPI: TCPA 0x000000007BFFB000 000032 (v02 HPQOEM INSYDE   00000000 HP   00040000)
[    0.016090] ACPI: UEFI 0x000000007BFFA000 000042 (v01 HPQOEM INSYDE   00000000 HP   00040000)
[    0.016098] ACPI: IHIS 0x000000007BFF9000 000038 (v01 HPQOEM INSYDE   00000001 HP   00040000)
[    0.016105] ACPI: SSDT 0x000000007BFF2000 0069C9 (v01 HPQOEM INSYDE   00001000 ACPI 00040000)
[    0.016114] ACPI: MCFG 0x000000007BFEF000 00003C (v01 HPQOEM INSYDE   00000003 HP   00040000)
[    0.016122] ACPI: SSDT 0x000000007BFEE000 0005F4 (v01 HPQOEM CpuDptf  00000003 ACPI 00040000)
[    0.016130] ACPI: SSDT 0x000000007BFE0000 0009EA (v01 HPQOEM DptfTab  00000003 ACPI 00040000)
[    0.016138] ACPI: SSDT 0x000000007BFDF000 0000C8 (v01 HPQOEM INSYDE   00000003 ACPI 00040000)
[    0.016147] ACPI: SSDT 0x000000007BFDE000 000763 (v01 HPQOEM INSYDE   00003000 ACPI 00040000)
[    0.016154] ACPI: SSDT 0x000000007BFDD000 000290 (v01 HPQOEM INSYDE   00003000 ACPI 00040000)
[    0.016163] ACPI: SSDT 0x000000007BFDC000 00017A (v01 HPQOEM INSYDE   00003000 ACPI 00040000)
[    0.016172] ACPI: APIC 0x000000007BFF0000 000084 (v03 HPQOEM SLIC-MPC 00000003 HP   00040000)
[    0.016180] ACPI: SSDT 0x000000007BFDB000 000451 (v01 HPQOEM INSYDE   00001000 ACPI 00040000)
[    0.016187] ACPI: TPM2 0x000000007BFDA000 000034 (v03 HPQOEM INSYDE   00000000 HP   00040000)
[    0.016195] ACPI: FPDT 0x000000007BFD9000 000044 (v01 HPQOEM SLIC-MPC 00000002 HP   00040000)
[    0.016203] ACPI: BGRT 0x000000007BFD8000 000038 (v01 HPQOEM INSYDE   00000001 HP   00040000)
[    0.016224] ACPI: Local APIC address 0xfee00000
[    0.016496] No NUMA configuration found
[    0.016499] Faking a node at [mem 0x0000000000000000-0x000000017fffffff]
[    0.016524] NODE_DATA(0) allocated [mem 0x17ffd5000-0x17fffffff]
[    0.017370] Zone ranges:
[    0.017373]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.017377]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.017380]   Normal   [mem 0x0000000100000000-0x000000017fffffff]
[    0.017384]   Device   empty
[    0.017386] Movable zone start for each node
[    0.017394] Early memory node ranges
[    0.017397]   node   0: [mem 0x0000000000001000-0x000000000006efff]
[    0.017399]   node   0: [mem 0x0000000000070000-0x0000000000085fff]
[    0.017401]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.017404]   node   0: [mem 0x0000000020200000-0x000000007a40efff]
[    0.017406]   node   0: [mem 0x000000007bfff000-0x000000007bffffff]
[    0.017408]   node   0: [mem 0x0000000100000000-0x000000017fffffff]
[    0.017994] Zeroed struct page in unavailable ranges: 24172 pages
[    0.017998] Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff]
[    0.018003] On node 0 totalpages: 1024404
[    0.018007]   DMA zone: 64 pages used for memmap
[    0.018009]   DMA zone: 21 pages reserved
[    0.018011]   DMA zone: 3972 pages, LIFO batch:0
[    0.018168]   DMA32 zone: 7753 pages used for memmap
[    0.018171]   DMA32 zone: 496144 pages, LIFO batch:63
[    0.044002]   Normal zone: 8192 pages used for memmap
[    0.044005]   Normal zone: 524288 pages, LIFO batch:63
[    0.062960] Reserving Intel graphics memory at [mem 0x7cc00000-0x7ebfffff]
[    0.063090] ACPI: PM-Timer IO Port: 0x408
[    0.063097] ACPI: Local APIC address 0xfee00000
[    0.063116] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[    0.063119] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[    0.063121] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[    0.063123] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[    0.063146] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114
[    0.063151] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.063155] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.063159] ACPI: IRQ0 used by override.
[    0.063161] ACPI: IRQ9 used by override.
[    0.063167] Using ACPI (MADT) for SMP configuration information
[    0.063193] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.063251] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.063255] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
[    0.063260] PM: Registered nosave memory: [mem 0x00086000-0x0009ffff]
[    0.063262] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.063266] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.063270] PM: Registered nosave memory: [mem 0x742d1000-0x742d1fff]
[    0.063275] PM: Registered nosave memory: [mem 0x742df000-0x742dffff]
[    0.063277] PM: Registered nosave memory: [mem 0x742e0000-0x742e0fff]
[    0.063281] PM: Registered nosave memory: [mem 0x742f0000-0x742f0fff]
[    0.063286] PM: Registered nosave memory: [mem 0x7a40f000-0x7aebefff]
[    0.063287] PM: Registered nosave memory: [mem 0x7aebf000-0x7bfbefff]
[    0.063289] PM: Registered nosave memory: [mem 0x7bfbf000-0x7bffefff]
[    0.063294] PM: Registered nosave memory: [mem 0x7c000000-0x7cbfffff]
[    0.063296] PM: Registered nosave memory: [mem 0x7cc00000-0x7ebfffff]
[    0.063297] PM: Registered nosave memory: [mem 0x7ec00000-0xe00f7fff]
[    0.063299] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
[    0.063301] PM: Registered nosave memory: [mem 0xe00f9000-0xfed00fff]
[    0.063303] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[    0.063304] PM: Registered nosave memory: [mem 0xfed02000-0xff9fffff]
[    0.063306] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[    0.063310] [mem 0x7ec00000-0xe00f7fff] available for PCI devices
[    0.063313] Booting paravirtualized kernel on bare hardware
[    0.063320] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.063340] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.064499] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
[    0.064524] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
[    0.064527] pcpu-alloc: [0] 0 1 2 3
[    0.064620] Built 1 zonelists, mobility grouping on.  Total pages: 1008374
[    0.064623] Policy zone: Normal
[    0.064628] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-26-generic root=UUID=ba1d51e4-3144-4a3f-93e3-9a01e9085f73 ro quiet splash vt.handoff=7
[    0.066358] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.067159] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.067249] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.092749] Calgary: detecting Calgary via BIOS EBDA area
[    0.092752] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.128400] Memory: 3833920K/4097616K available (14339K kernel code, 2388K rwdata, 4728K rodata, 2668K init, 5056K bss, 263696K reserved, 0K cma-reserved)
[    0.128931] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.128969] Kernel/User page tables isolation: enabled
[    0.129010] ftrace: allocating 43225 entries in 169 pages
[    0.161803] rcu: Hierarchical RCU implementation.
[    0.161808] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.161810] Tasks RCU enabled.
[    0.161812] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.161814] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.172020] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[    0.172573] random: crng done (trusting CPU's manufacturer)
[    0.172653] vt handoff: transparent VT on vt#7
[    0.172672] Console: colour dummy device 80x25
[    0.172681] printk: console [tty0] enabled
[    0.172740] ACPI: Core revision 20190703
[    0.173170] APIC: Switch to symmetric I/O mode setup
[    0.174962] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x171024fa93b, max_idle_ns: 440795253189 ns
[    0.174974] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.00 BogoMIPS (lpj=6400000)
[    0.174979] pid_max: default: 32768 minimum: 301
[    0.178967] LSM: Security Framework initializing
[    0.178967] Yama: becoming mindful.
[    0.178967] AppArmor: AppArmor initialized
[    0.178967] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.178967] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.178967] *** VALIDATE proc ***
[    0.178967] *** VALIDATE cgroup1 ***
[    0.178967] *** VALIDATE cgroup2 ***
[    0.178967] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.178967] process: using mwait in idle threads
[    0.178967] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    0.178967] Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0
[    0.178967] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.178967] Spectre V2 : Mitigation: Full generic retpoline
[    0.178967] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.178967] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.178967] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.178967] MDS: Mitigation: Clear CPU buffers
[    0.178967] Freeing SMP alternatives memory: 36K
[    0.178967] TSC deadline timer enabled
[    0.178967] smpboot: CPU0: Intel(R) Celeron(R) CPU  N3060  @ 1.60GHz (family: 0x6, model: 0x4c, stepping: 0x4)
[    0.178967] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
[    0.178967] ... version:                3
[    0.178967] ... bit width:              40
[    0.178967] ... generic registers:      2
[    0.178967] ... value mask:             000000ffffffffff
[    0.178967] ... max period:             0000007fffffffff
[    0.178967] ... fixed-purpose events:   3
[    0.178967] ... event mask:             0000000700000003
[    0.178967] rcu: Hierarchical SRCU implementation.
[    0.178967] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.178967] smp: Bringing up secondary CPUs ...
[    0.178967] x86: Booting SMP configuration:
[    0.178967] .... node  #0, CPUs:      #1
[    0.179826] smp: Brought up 1 node, 2 CPUs
[    0.179826] smpboot: Max logical packages: 2
[    0.179826] smpboot: Total of 2 processors activated (6400.00 BogoMIPS)
[    0.180073] devtmpfs: initialized
[    0.180073] x86/mm: Memory block size: 128MB
[    0.183102] PM: Registering ACPI NVS region [mem 0x0006f000-0x0006ffff] (4096 bytes)
[    0.183102] PM: Registering ACPI NVS region [mem 0x7aebf000-0x7bfbefff] (17825792 bytes)
[    0.184127] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.184127] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.184127] pinctrl core: initialized pinctrl subsystem
[    0.184127] PM: RTC time: 18:21:19, date: 2020-01-21
[    0.184127] NET: Registered protocol family 16
[    0.184191] audit: initializing netlink subsys (disabled)
[    0.184277] audit: type=2000 audit(1579630879.008:1): state=initialized audit_enabled=0 res=1
[    0.184277] EISA bus registered
[    0.184277] cpuidle: using governor ladder
[    0.184277] cpuidle: using governor menu
[    0.184277] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.184277] ACPI: bus type PCI registered
[    0.184277] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.184277] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.184277] PCI: not using MMCONFIG
[    0.184277] PCI: Using configuration type 1 for base access
[    0.186994] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.191081] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.199259] ACPI: Added _OSI(Module Device)
[    0.199262] ACPI: Added _OSI(Processor Device)
[    0.199264] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.199266] ACPI: Added _OSI(Processor Aggregator Device)
[    0.199268] ACPI: Added _OSI(Linux-Dell-Video)
[    0.199271] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.199273] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.243341] ACPI: 9 ACPI AML tables successfully acquired and loaded
[    0.250801] ACPI: Dynamic OEM Table Load:
[    0.250822] ACPI: SSDT 0xFFFF8E91BA82D000 0006B8 (v01 PmRef  Cpu0Ist  00003000 INTL 20130117)
[    0.254445] ACPI: Dynamic OEM Table Load:
[    0.254471] ACPI: SSDT 0xFFFF8E91BB332000 0006BC (v01 PmRef  Cpu0Cst  00003001 INTL 20130117)
[    0.258848] ACPI: Dynamic OEM Table Load:
[    0.258863] ACPI: SSDT 0xFFFF8E91BAAC6600 00015F (v01 PmRef  ApIst    00003000 INTL 20130117)
[    0.261651] ACPI: Dynamic OEM Table Load:
[    0.261664] ACPI: SSDT 0xFFFF8E91BAA63E40 00008D (v01 PmRef  ApCst    00003000 INTL 20130117)
[    0.265386] ACPI: EC: EC started
[    0.265389] ACPI: EC: interrupt blocked
[    0.267090] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.267097] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.267100] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
[    0.267102] ACPI: Interpreter enabled
[    0.267175] ACPI: (supports S0 S3 S4 S5)
[    0.267179] ACPI: Using IOAPIC for interrupt routing
[    0.267296] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.271408] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
[    0.271438] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.272767] ACPI: Enabled 8 GPEs in block 00 to 3F
[    0.277371] ACPI: Power Resource [USBC] (on)
[    0.287466] ACPI: Power Resource [CLK0] (on)
[    0.303964] ACPI: Power Resource [CLK0] (on)
[    0.304097] ACPI: Power Resource [CLK1] (on)
[    0.312755] ACPI: Power Resource [ID3C] (off)
[    0.324495] ACPI: Power Resource [FN00] (off)
[    0.326623] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.326641] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.326845] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.326885] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.328284] PCI host bridge to bus 0000:00
[    0.328291] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
[    0.328295] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
[    0.328299] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
[    0.328302] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.328306] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.328309] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.328312] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[    0.328316] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[    0.328320] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.328348] pci 0000:00:00.0: [8086:2280] type 00 class 0x060000
[    0.328811] pci 0000:00:02.0: [8086:22b1] type 00 class 0x030000
[    0.328842] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
[    0.328857] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[    0.328868] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.328904] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.329222] pci 0000:00:0b.0: [8086:22dc] type 00 class 0x118000
[    0.329250] pci 0000:00:0b.0: reg 0x10: [mem 0x91414000-0x91414fff 64bit]
[    0.329613] pci 0000:00:13.0: [8086:22a3] type 00 class 0x010601
[    0.329683] pci 0000:00:13.0: reg 0x20: [io  0x3060-0x307f]
[    0.329697] pci 0000:00:13.0: reg 0x24: [mem 0x91415000-0x914157ff]
[    0.329770] pci 0000:00:13.0: PME# supported from D3hot
[    0.330140] pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330
[    0.330176] pci 0000:00:14.0: reg 0x10: [mem 0x91400000-0x9140ffff 64bit]
[    0.330285] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.330639] pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000
[    0.330670] pci 0000:00:1a.0: reg 0x10: [mem 0x91300000-0x913fffff]
[    0.330683] pci 0000:00:1a.0: reg 0x14: [mem 0x91200000-0x912fffff]
[    0.330787] pci 0000:00:1a.0: PME# supported from D0 D3hot
[    0.331077] pci 0000:00:1b.0: [8086:2284] type 00 class 0x040300
[    0.331117] pci 0000:00:1b.0: reg 0x10: [mem 0x91410000-0x91413fff 64bit]
[    0.331230] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.331523] pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400
[    0.331675] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.332005] pci 0000:00:1c.2: [8086:22cc] type 01 class 0x060400
[    0.332153] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.332457] pci 0000:00:1c.3: [8086:22ce] type 01 class 0x060400
[    0.332602] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.332919] pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100
[    0.333326] pci 0000:00:1f.3: [8086:2292] type 00 class 0x0c0500
[    0.333399] pci 0000:00:1f.3: reg 0x10: [mem 0x91416000-0x9141601f]
[    0.333516] pci 0000:00:1f.3: reg 0x20: [io  0x3040-0x305f]
[    0.334087] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.334264] pci 0000:02:00.0: [10ec:d723] type 00 class 0x028000
[    0.334323] pci 0000:02:00.0: reg 0x10: [io  0x2000-0x20ff]
[    0.334374] pci 0000:02:00.0: reg 0x18: [mem 0x91100000-0x9110ffff 64bit]
[    0.334604] pci 0000:02:00.0: supports D1 D2
[    0.334608] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.334893] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.334900] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.334907] pci 0000:00:1c.2:   bridge window [mem 0x91100000-0x911fffff]
[    0.335064] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.335110] pci 0000:03:00.0: reg 0x10: [io  0x1000-0x10ff]
[    0.335149] pci 0000:03:00.0: reg 0x18: [mem 0x91004000-0x91004fff 64bit]
[    0.335174] pci 0000:03:00.0: reg 0x20: [mem 0x91000000-0x91003fff 64bit]
[    0.335332] pci 0000:03:00.0: supports D1 D2
[    0.335335] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.335594] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.335601] pci 0000:00:1c.3:   bridge window [io  0x1000-0x1fff]
[    0.335607] pci 0000:00:1c.3:   bridge window [mem 0x91000000-0x910fffff]
[    0.346911] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.347223] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.347527] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.347830] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.348127] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.348426] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.348723] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.349027] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.351278] ACPI: EC: interrupt unblocked
[    0.351313] ACPI: EC: event unblocked
[    0.351329] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.351335] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events
[    0.351664] SCSI subsystem initialized
[    0.351664] libata version 3.00 loaded.
[    0.351664] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.351664] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.351664] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.351664] vgaarb: loaded
[    0.351664] ACPI: bus type USB registered
[    0.351664] usbcore: registered new interface driver usbfs
[    0.351664] usbcore: registered new interface driver hub
[    0.351664] usbcore: registered new device driver usb
[    0.351664] pps_core: LinuxPPS API ver. 1 registered
[    0.351664] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.351664] PTP clock support registered
[    0.351664] EDAC MC: Ver: 3.0.0
[    0.351664] Registered efivars operations
[    0.351664] PCI: Using ACPI for IRQ routing
[    0.356064] PCI: pci_cache_line_size set to 64 bytes
[    0.356154] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
[    0.356157] e820: reserve RAM buffer [mem 0x00086000-0x0008ffff]
[    0.356160] e820: reserve RAM buffer [mem 0x742d1018-0x77ffffff]
[    0.356162] e820: reserve RAM buffer [mem 0x742e0018-0x77ffffff]
[    0.356164] e820: reserve RAM buffer [mem 0x7a40f000-0x7bffffff]
[    0.356459] NetLabel: Initializing
[    0.356461] NetLabel:  domain hash size = 128
[    0.356462] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.356529] NetLabel:  unlabeled traffic allowed by default
[    0.358972] clocksource: Switched to clocksource tsc-early
[    0.398401] VFS: Disk quotas dquot_6.6.0
[    0.398448] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.398533] *** VALIDATE hugetlbfs ***
[    0.398787] AppArmor: AppArmor Filesystem Enabled
[    0.398870] pnp: PnP ACPI init
[    0.399145] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.399150] system 00:00: [io  0x0400-0x047f] has been reserved
[    0.399153] system 00:00: [io  0x0500-0x05fe] has been reserved
[    0.399169] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.399369] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.399517] pnp 00:02: Plug and Play ACPI device, IDs SYN3252 PNP0f13 (active)
[    0.416006] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.416342] system 00:04: [mem 0xe0000000-0xefffffff] could not be reserved
[    0.416347] system 00:04: [mem 0xfea00000-0xfeafffff] has been reserved
[    0.416351] system 00:04: [mem 0xfed01000-0xfed01fff] has been reserved
[    0.416355] system 00:04: [mem 0xfed03000-0xfed03fff] has been reserved
[    0.416358] system 00:04: [mem 0xfed06000-0xfed06fff] has been reserved
[    0.416362] system 00:04: [mem 0xfed08000-0xfed09fff] has been reserved
[    0.416366] system 00:04: [mem 0xfed80000-0xfedbffff] has been reserved
[    0.416370] system 00:04: [mem 0xfed1c000-0xfed1cfff] has been reserved
[    0.416374] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.416386] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.417052] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.418014] pnp: PnP ACPI: found 6 devices
[    0.422960] thermal_sys: Registered thermal governor 'fair_share'
[    0.422963] thermal_sys: Registered thermal governor 'bang_bang'
[    0.422966] thermal_sys: Registered thermal governor 'step_wise'
[    0.422982] thermal_sys: Registered thermal governor 'user_space'
[    0.422984] thermal_sys: Registered thermal governor 'power_allocator'
[    0.427592] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.427712] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.427720] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.427724] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    0.427747] pci 0000:00:1c.0: BAR 14: assigned [mem 0x91500000-0x916fffff]
[    0.427759] pci 0000:00:1c.0: BAR 15: assigned [mem 0x91700000-0x918fffff 64bit pref]
[    0.427767] pci 0000:00:1c.0: BAR 13: assigned [io  0x4000-0x4fff]
[    0.427775] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.427782] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.427791] pci 0000:00:1c.0:   bridge window [mem 0x91500000-0x916fffff]
[    0.427799] pci 0000:00:1c.0:   bridge window [mem 0x91700000-0x918fffff 64bit pref]
[    0.427809] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.427813] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.427820] pci 0000:00:1c.2:   bridge window [mem 0x91100000-0x911fffff]
[    0.427833] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.427837] pci 0000:00:1c.3:   bridge window [io  0x1000-0x1fff]
[    0.427845] pci 0000:00:1c.3:   bridge window [mem 0x91000000-0x910fffff]
[    0.427860] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
[    0.427864] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
[    0.427867] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
[    0.427870] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.427874] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.427877] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.427880] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[    0.427884] pci_bus 0000:00: resource 11 [mem 0x80000000-0xdfffffff window]
[    0.427887] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    0.427891] pci_bus 0000:01: resource 1 [mem 0x91500000-0x916fffff]
[    0.427894] pci_bus 0000:01: resource 2 [mem 0x91700000-0x918fffff 64bit pref]
[    0.427898] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.427902] pci_bus 0000:02: resource 1 [mem 0x91100000-0x911fffff]
[    0.427905] pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
[    0.427909] pci_bus 0000:03: resource 1 [mem 0x91000000-0x910fffff]
[    0.428315] NET: Registered protocol family 2
[    0.428713] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    0.428825] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.429110] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[    0.429300] TCP: Hash tables configured (established 32768 bind 32768)
[    0.429450] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.429517] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.429814] NET: Registered protocol family 1
[    0.429829] NET: Registered protocol family 44
[    0.429862] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.432393] PCI: CLS 64 bytes, default 64
[    0.432533] Trying to unpack rootfs image as initramfs...
[    0.820517] Initramfs unpacking failed: Decoding failed
[    0.843125] Freeing initrd memory: 46688K
[    0.843199] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.843207] software IO TLB: mapped [mem 0x6c1ce000-0x701ce000] (64MB)
[    0.843315] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x171024fa93b, max_idle_ns: 440795253189 ns
[    0.843350] clocksource: Switched to clocksource tsc
[    0.843512] check: Scanning for low memory corruption every 60 seconds
[    0.850370] Initialise system trusted keyrings
[    0.850400] Key type blacklist registered
[    0.850520] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[    0.854812] zbud: loaded
[    0.855992] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.856540] fuse: init (API version 7.31)
[    0.856891] Platform Keyring initialized
[    0.869646] Key type asymmetric registered
[    0.869650] Asymmetric key parser 'x509' registered
[    0.869673] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    0.869814] io scheduler mq-deadline registered
[    0.871346] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.871578] efifb: probing for efifb
[    0.871626] efifb: showing boot graphics
[    0.873802] efifb: framebuffer at 0x80000000, using 4128k, total 4128k
[    0.873805] efifb: mode is 1366x768x32, linelength=5504, pages=1
[    0.873806] efifb: scrolling: redraw
[    0.873809] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.873960] fbcon: Deferring console take-over
[    0.873963] fb0: EFI VGA frame buffer device
[    0.873989] intel_idle: MWAIT substates: 0x33000020
[    0.873991] intel_idle: v0.4.1 model 0x4C
[    0.874253] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.874620] ACPI: AC Adapter [ACAD] (off-line)
[    0.874788] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input0
[    0.874807] ACPI: Lid Switch [LID0]
[    0.874922] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.874964] ACPI: Power Button [PWRB]
[    0.875123] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.875149] ACPI: Power Button [PWRF]
[    0.882333] thermal LNXTHERM:00: registered as thermal_zone0
[    0.882338] ACPI: Thermal Zone [TZ01] (27 C)
[    0.882690] thermal LNXTHERM:01: registered as thermal_zone1
[    0.882693] ACPI: Thermal Zone [TZ02] (28 C)
[    0.883569] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.904693] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.921530] Linux agpgart interface v0.103
[    0.963984] battery: ACPI: Battery Slot [BAT1] (battery present)
[    1.036469] loop: module loaded
[    1.037721] libphy: Fixed MDIO Bus: probed
[    1.037725] tun: Universal TUN/TAP device driver, 1.6
[    1.038252] PPP generic driver version 2.4.2
[    1.038402] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.038419] ehci-pci: EHCI PCI platform driver
[    1.038449] ehci-platform: EHCI generic platform driver
[    1.038479] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.038486] ohci-pci: OHCI PCI platform driver
[    1.038516] ohci-platform: OHCI generic platform driver
[    1.038534] uhci_hcd: USB Universal Host Controller Interface driver
[    1.039020] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.039036] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.040181] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081509810
[    1.040196] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.040646] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[    1.040652] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.040655] usb usb1: Product: xHCI Host Controller
[    1.040658] usb usb1: Manufacturer: Linux 5.3.0-26-generic xhci-hcd
[    1.040661] usb usb1: SerialNumber: 0000:00:14.0
[    1.041785] hub 1-0:1.0: USB hub found
[    1.041820] hub 1-0:1.0: 7 ports detected
[    1.043887] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.043899] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.043910] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    1.044039] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03
[    1.044044] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.044047] usb usb2: Product: xHCI Host Controller
[    1.044050] usb usb2: Manufacturer: Linux 5.3.0-26-generic xhci-hcd
[    1.044053] usb usb2: SerialNumber: 0000:00:14.0
[    1.044960] hub 2-0:1.0: USB hub found
[    1.044997] hub 2-0:1.0: 6 ports detected
[    1.047171] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.066748] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.066764] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.068007] mousedev: PS/2 mouse device common for all mice
[    1.069959] rtc_cmos 00:05: RTC can wake from S4
[    1.070365] rtc_cmos 00:05: registered as rtc0
[    1.070423] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram
[    1.070443] i2c /dev entries driver
[    1.070605] device-mapper: uevent: version 1.0.3
[    1.070793] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
[    1.070862] platform eisa.0: Probing EISA bus 0
[    1.070869] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    1.070872] platform eisa.0: Cannot allocate resource for EISA slot 1
[    1.070875] platform eisa.0: Cannot allocate resource for EISA slot 2
[    1.070878] platform eisa.0: Cannot allocate resource for EISA slot 3
[    1.070881] platform eisa.0: Cannot allocate resource for EISA slot 4
[    1.070884] platform eisa.0: Cannot allocate resource for EISA slot 5
[    1.070887] platform eisa.0: Cannot allocate resource for EISA slot 6
[    1.070890] platform eisa.0: Cannot allocate resource for EISA slot 7
[    1.070892] platform eisa.0: Cannot allocate resource for EISA slot 8
[    1.070895] platform eisa.0: EISA: Detected 0 cards
[    1.070905] intel_pstate: Intel P-state driver initializing
[    1.071628] ledtrig-cpu: registered to indicate activity on CPUs
[    1.071634] EFI Variables Facility v0.08 2004-May-17
[    1.079914] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.128858] NET: Registered protocol family 10
[    1.158499] Segment Routing with IPv6
[    1.158561] NET: Registered protocol family 17
[    1.158740] Key type dns_resolver registered
[    1.159581] RAS: Correctable Errors collector initialized.
[    1.159706] microcode: sig=0x406c4, pf=0x1, revision=0x411
[    1.160377] microcode: Microcode Update Driver: v2.2.
[    1.160421] sched_clock: Marking stable (1157754637, 2546213)->(1172550862, -12250012)
[    1.161524] registered taskstats version 1
[    1.161546] Loading compiled-in X.509 certificates
[    1.167666] Loaded X.509 cert 'Build time autogenerated kernel key: a633ebf44975be9861a24233b58eb29a160a1563'
[    1.167748] zswap: loaded using pool lzo/zbud
[    1.195254] Key type big_key registered
[    1.195271] Key type trusted registered
[    1.210218] Key type encrypted registered
[    1.210234] AppArmor: AppArmor sha1 policy hashing enabled
[    1.212043] integrity: Loading X.509 certificate: UEFI:db
[    1.212180] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[    1.212182] integrity: Loading X.509 certificate: UEFI:db
[    1.212251] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[    1.212253] integrity: Loading X.509 certificate: UEFI:db
[    1.212315] integrity: Loaded X.509 cert 'Hewlett-Packard Company: HP UEFI Secure Boot 2013 DB key: 1d7cf2c2b92673f69c8ee1ec7063967ab9b62bec'
[    1.215037] ima: Allocated hash algorithm: sha1
[    1.254306] No architecture policies found
[    1.254362] evm: Initialising EVM extended attributes:
[    1.254365] evm: security.selinux
[    1.254367] evm: security.SMACK64
[    1.254368] evm: security.SMACK64EXEC
[    1.254369] evm: security.SMACK64TRANSMUTE
[    1.254372] evm: security.SMACK64MMAP
[    1.254373] evm: security.apparmor
[    1.254374] evm: security.ima
[    1.254377] evm: security.capability
[    1.254379] evm: HMAC attrs: 0x1
[    1.255761] PM:   Magic number: 4:280:393
[    1.256257] rtc_cmos 00:05: setting system clock to 2020-01-21T18:21:20 UTC (1579630880)
[    1.256693] Lockdown: swapper/0: Hibernation is restricted; see man kernel_lockdown.7
[    1.272587] Freeing unused decrypted memory: 2040K
[    1.274375] Freeing unused kernel image memory: 2668K
[    1.274614] Write protecting the kernel read-only data: 22528k
[    1.276435] Freeing unused kernel image memory: 2008K
[    1.277660] Freeing unused kernel image memory: 1416K
[    1.300385] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.300725] x86/mm: Checking user space page tables
[    1.322915] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.322923] Run /init as init process
[    1.379022] usb 1-2: new low-speed USB device number 2 using xhci_hcd
[    1.531589] usb 1-2: New USB device found, idVendor=1bcf, idProduct=0005, bcdDevice= 0.90
[    1.531593] usb 1-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    1.531596] usb 1-2: Product: USB Optical Mouse
[    1.656154] wmi_bus wmi_bus-PNP0C14:00: WQBJ data block query control method not found
[    1.657585] ahci 0000:00:13.0: version 3.0
[    1.657940] ahci 0000:00:13.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    1.657945] ahci 0000:00:13.0: flags: 64bit ncq led clo only pio slum part deso sadm apst
[    1.660069] usb 1-5: new high-speed USB device number 3 using xhci_hcd
[    1.662220] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.666716] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[    1.666783] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.666895] scsi host0: ahci
[    1.673961] scsi host1: ahci
[    1.674105] ata1: SATA max UDMA/133 abar m2048@0x91415000 port 0x91415100 irq 119
[    1.674109] ata2: SATA max UDMA/133 abar m2048@0x91415000 port 0x91415180 irq 119
[    1.679281] libphy: r8169: probed
[    1.679611] r8169 0000:03:00.0 eth0: RTL8168h/8111h, 04:0e:3c:f2:f1:d9, XID 541, IRQ 120
[    1.679615] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.786396] r8169 0000:03:00.0 eno1: renamed from eth0
[    1.810449] usb 1-5: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=88.32
[    1.810455] usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.810458] usb 1-5: Product: USB2.0 Hub
[    1.812496] hub 1-5:1.0: USB hub found
[    1.812970] hub 1-5:1.0: 4 ports detected
[    1.824684] hidraw: raw HID events driver (C) Jiri Kosina
[    1.832937] usbcore: registered new interface driver usbhid
[    1.832941] usbhid: USB HID core driver
[    1.843786] input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:1BCF:0005.0001/input/input6
[    1.844037] hid-generic 0003:1BCF:0005.0001: input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:14.0-2/input0
[    1.990832] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.990879] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.995277] ata1.00: ATA-8: TOSHIBA MQ01ABF050, AM0C1C, max UDMA/100
[    1.995282] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    2.001218] ata2.00: ATAPI: hp      DVDRW  DA8AESH, XH6M, max UDMA/133
[    2.001257] ata1.00: configured for UDMA/100
[    2.003825] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MQ01ABF0 1C   PQ: 0 ANSI: 5
[    2.004300] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[    2.004593] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    2.004595] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.004620] sd 0:0:0:0: [sda] Write Protect is off
[    2.004624] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.004667] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.011637] ata2.00: configured for UDMA/133
[    2.029800] scsi 1:0:0:0: CD-ROM            hp       DVDRW  DA8AESH   XH6M PQ: 0 ANSI: 5
[    2.103060] usb 1-5.2: new high-speed USB device number 4 using xhci_hcd
[    2.109679] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    2.109685] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.111029] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.111454] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.151083]  sda: sda1 sda2
[    2.152163] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.224034] usb 1-5.2: New USB device found, idVendor=05c8, idProduct=0233, bcdDevice= 1.08
[    2.224041] usb 1-5.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    2.224044] usb 1-5.2: Product: HP Webcam
[    2.224049] usb 1-5.2: Manufacturer: Generic
[    2.224051] usb 1-5.2: SerialNumber: 200901010001
[    2.306999] usb 1-5.3: new full-speed USB device number 5 using xhci_hcd
[    2.412146] usb 1-5.3: config 1 interface 1 altsetting 0 endpoint 0x3 has wMaxPacketSize 0, skipping
[    2.412152] usb 1-5.3: config 1 interface 1 altsetting 0 endpoint 0x83 has wMaxPacketSize 0, skipping
[    2.413293] usb 1-5.3: New USB device found, idVendor=0bda, idProduct=b009, bcdDevice= 2.00
[    2.413299] usb 1-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.413304] usb 1-5.3: Product: 802.11n WLAN Adapter
[    2.413308] usb 1-5.3: Manufacturer: Realtek
[    2.413310] usb 1-5.3: SerialNumber: 00e04c000001
[    2.447116] psmouse serio1: synaptics: queried max coordinates: x [..5648], y [..4826]
[    2.477762] psmouse serio1: synaptics: queried min coordinates: x [1292..], y [1026..]
[    2.477778] psmouse serio1: synaptics: Your touchpad (PNP: SYN3252 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[    2.547278] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.16, id: 0x1e2b1, caps: 0xf00323/0x840300/0x2e800/0x400000, board id: 3320, fw id: 2659795
[    2.586956] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[    2.858948] fbcon: Taking over console
[    2.859189] Console: switching to colour frame buffer device 170x48
[    2.937468] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    4.814429] systemd[1]: Inserted module 'autofs4'
[    5.171693] systemd[1]: systemd 242 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    5.191825] systemd[1]: Detected architecture x86-64.
[    5.204861] systemd[1]: Set hostname to <berk-HP-Laptop-15-ra0xx>.
[    5.221585] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
[    5.221941] Lockdown: systemd: /dev/mem,kmem,port is restricted; see man kernel_lockdown.7
[    5.331871] Lockdown: systemd: BPF is restricted; see man kernel_lockdown.7
[    6.535513] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[    6.535526] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[    6.895109] systemd[1]: /lib/systemd/system/dbus.socket:4: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[    7.554811] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    7.557178] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    7.557725] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    7.696672] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[    8.180354] lp: driver loaded but no devices found
[    8.191765] ppdev: user-space parallel port driver
[    8.460259] Adding 2097148k swap on /swapfile.  Priority:-2 extents:6 across:2260988k FS
[    8.637682] systemd-journald[303]: Received request to flush runtime journal from PID 1
[   10.881014] input: HP Wireless hotkeys as /devices/virtual/input/input7
[   11.603115] proc_thermal 0000:00:0b.0: Creating sysfs group for PROC_THERMAL_PCI
[   11.922347] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   11.929922] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   11.997866] mc: Linux media interface: v0.10
[   12.296069] hp_wmi: query 0xd returned error 0x5
[   12.296198] input: HP WMI hotkeys as /devices/virtual/input/input8
[   12.440048] videodev: Linux video capture interface: v2.00
[   12.585764] i915 0000:00:02.0: Disabling error capture for VT-d workaround
[   12.585808] checking generic (80000000 408000) vs hw (80000000 10000000)
[   12.585810] fb0: switching to inteldrmfb from EFI VGA
[   12.586039] Console: switching to colour dummy device 80x25
[   12.586112] i915 0000:00:02.0: vgaarb: deactivate vga console
[   12.586257] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   12.586258] [drm] Driver supports precise vblank timestamp query.
[   12.594246] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   12.636385] [drm] Initialized i915 1.6.0 20190619 for 0000:00:02.0 on minor 0
[   12.638784] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   12.642186] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[   12.758764] Bluetooth: Core ver 2.22
[   12.758816] NET: Registered protocol family 31
[   12.758818] Bluetooth: HCI device and connection manager initialized
[   12.758826] Bluetooth: HCI socket layer initialized
[   12.758830] Bluetooth: L2CAP socket layer initialized
[   12.758841] Bluetooth: SCO socket layer initialized
[   12.856932] cryptd: max_cpu_qlen set to 1000
[   12.875251] fbcon: i915drmfb (fb0) is primary device
[   12.875372] Console: switching to colour frame buffer device 170x48
[   12.875407] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[   12.967113] uvcvideo: Found UVC 1.00 device HP Webcam (05c8:0233)
[   12.985389] SSE version of gcm_enc/dec engaged.
[   12.991762] uvcvideo 1-5.2:1.0: Entity type for entity Extension 7 was not initialized!
[   12.991767] uvcvideo 1-5.2:1.0: Entity type for entity Processing 2 was not initialized!
[   12.991769] uvcvideo 1-5.2:1.0: Entity type for entity Camera 1 was not initialized!
[   12.991772] uvcvideo 1-5.2:1.0: Entity type for entity Extension 4 was not initialized!
[   12.991895] input: HP Webcam: HP Webcam as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2:1.0/input/input10
[   12.992035] usbcore: registered new interface driver uvcvideo
[   12.992037] USB Video Class driver (1.1.1)
[   13.055009] intel_rapl_common: Found RAPL domain package
[   13.055013] intel_rapl_common: Found RAPL domain core
[   13.129717] usbcore: registered new interface driver btusb
[   13.321893] Lockdown: systemd-udevd: Loading of module with unavailable key is restricted; see man kernel_lockdown.7
[   13.875529] kvm: disabled by bios
[   13.908946] kvm: disabled by bios
[   14.433463] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   14.529522] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3227: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   14.529527] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   14.529530] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   14.529532] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   14.529533] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   14.529536] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x19
[   14.529538] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[   14.627176] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   14.627290] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   14.627384] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   15.158170] Bluetooth: hci0: command 0x1001 tx timeout
[   18.467154] audit: type=1400 audit(1579630897.704:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=623 comm="apparmor_parser"
[   18.467163] audit: type=1400 audit(1579630897.704:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=623 comm="apparmor_parser"
[   18.470683] audit: type=1400 audit(1579630897.708:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=627 comm="apparmor_parser"
[   18.501930] audit: type=1400 audit(1579630897.740:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=628 comm="apparmor_parser"
[   18.718207] audit: type=1400 audit(1579630897.956:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice" pid=622 comm="apparmor_parser"
[   18.718218] audit: type=1400 audit(1579630897.956:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice//gpg" pid=622 comm="apparmor_parser"
[   18.770691] audit: type=1400 audit(1579630898.008:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=630 comm="apparmor_parser"
[   18.770701] audit: type=1400 audit(1579630898.008:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=630 comm="apparmor_parser"
[   18.770706] audit: type=1400 audit(1579630898.008:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=630 comm="apparmor_parser"
[   18.770710] audit: type=1400 audit(1579630898.008:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=630 comm="apparmor_parser"
[   23.187014] Bluetooth: hci0: RTL: HCI_OP_READ_LOCAL_VERSION failed (-110)

[   26.428577] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   26.428581] Bluetooth: BNEP filters: protocol multicast
[   26.428589] Bluetooth: BNEP socket layer initialized
[   32.277395] Generic Realtek PHY r8169-300:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
[   32.388321] r8169 0000:03:00.0 eno1: Link is Down
[   35.451611] r8169 0000:03:00.0 eno1: Link is Up - 1Gbps/Full - flow control rx/tx
[   35.451653] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[   52.826002] rfkill: input handler disabled
[   82.870300] rfkill: input handler enabled
[   97.912635] rfkill: input handler disabled
[  156.759190] r8169 0000:03:00.0 eno1: Link is Down
[  231.019221] r8169 0000:03:00.0 eno1: Link is Up - 1Gbps/Full - flow control rx/tx
[  601.607472] perf: interrupt took too long (2525 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
[  961.945423] perf: interrupt took too long (3181 > 3156), lowering kernel.perf_event_max_sample_rate to 62750
[ 1171.914941] perf: interrupt took too long (3989 > 3976), lowering kernel.perf_event_max_sample_rate to 50000
[ 2389.491815] perf: interrupt took too long (5005 > 4986), lowering kernel.perf_event_max_sample_rate to 39750

[speakerXXL]

02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8723DE 802.11b/g/n PCIe Adapter

Kablolu bağlantı sağlayarak, buradaki konuda bahsedildiği biçimde RTL8723DE için önerilen paketi kurmayı deneyebilirsiniz.

[houseofcards]

Kod Seç Genişlet

berk@berk-HP-Laptop-15-ra0xx:~$ sudo add-apt-repository ppa:kelebek333/kablosuz
[sudo] password for berk:
You must disable secureboot for dkms installed modules
Daha fazla bilgi: https://launchpad.net/~kelebek333/+archive/ubuntu/kablosuz
Devam etmek için [ENTER] tuşuna, eklemeyi iptal etmek için Ctrl-c tuşlarına basınız.

Aynı:  1 http://tr.archive.ubuntu.com/ubuntu eoan InRelease
Aynı:  2 http://tr.archive.ubuntu.com/ubuntu eoan-updates InRelease                         
Aynı:  3 http://tr.archive.ubuntu.com/ubuntu eoan-backports InRelease                       
Aynı:  4 http://ppa.launchpad.net/kelebek333/kablosuz/ubuntu eoan InRelease               
Aynı:  5 http://security.ubuntu.com/ubuntu eoan-security InRelease
Paket listeleri okunuyor... Bitti
N: '/etc/apt/sources.list.d/' dizinindeki 'kelebek333-ubuntu-kablosuz-eoan.list.save' dosyası geçersiz bir dosya uzantısı olduğu için yok sayılıyor
berk@berk-HP-Laptop-15-ra0xx:~$ sudo apt-get update
Aynı:  1 http://tr.archive.ubuntu.com/ubuntu eoan InRelease
Aynı:  2 http://tr.archive.ubuntu.com/ubuntu eoan-updates InRelease                                                                 
Aynı:  3 http://tr.archive.ubuntu.com/ubuntu eoan-backports InRelease                                                               
Aynı:  4 http://ppa.launchpad.net/kelebek333/kablosuz/ubuntu eoan InRelease 
Aynı:  5 http://security.ubuntu.com/ubuntu eoan-security InRelease
Paket listeleri okunuyor... Bitti
N: '/etc/apt/sources.list.d/' dizinindeki 'kelebek333-ubuntu-kablosuz-eoan.list.save' dosyası geçersiz bir dosya uzantısı olduğu için yok sayılıyor
berk@berk-HP-Laptop-15-ra0xx:~$ sudo apt install rtl8821ce-dkms
N: '/etc/apt/sources.list.d/' dizinindeki 'kelebek333-ubuntu-kablosuz-eoan.list.save' dosyası geçersiz bir dosya uzantısı olduğu için yok sayılıyor
E: dpkg kesintiye uğradı, sorunu düzeltmek için elle 'sudo dpkg --configure -a' komutunu çalıştırın.
berk@berk-HP-Laptop-15-ra0xx:~$ sudo apt install rtl8723au-dkms
N: '/etc/apt/sources.list.d/' dizinindeki 'kelebek333-ubuntu-kablosuz-eoan.list.save' dosyası geçersiz bir dosya uzantısı olduğu için yok sayılıyor
E: dpkg kesintiye uğradı, sorunu düzeltmek için elle 'sudo dpkg --configure -a' komutunu çalıştırın.
berk@berk-HP-Laptop-15-ra0xx:~$



Hatalı birşey mi yaptım acaba?

[speakerXXL]

E: dpkg kesintiye uğradı, sorunu düzeltmek için elle 'sudo dpkg --configure -a' komutunu çalıştırın.

Paket yöneticisinde bir işlemi elle iptal etmişşsiniz. Paket yöneticisi çalışırken işlemi iptal etmeyin. Nasıl düzelteceğiniz zaten çıktıda anlatılmış, çıktıdaki komutu çalıştırınız, ardından yeniden denersiniz.

[Empat]

Sorununuz çözüldüyse, forum düzeninin sürdürülebilirliğine katkı sağlamak için, konu başlığınızı [Çözüldü] olarak işaretlemenizi rica ediyoruz.

Başka bir sorunun yanıtını bulamazsanız ya da bir sorunla karşılaşırsanız, yeni bir konu açabilirsiniz.

İyi forumlar.

[houseofcards]

Kod Seç Genişlet

berk@berk-HP-Laptop-15-ra0xx:~$ sudo add-apt-repository ppa:kelebek333/kablosuz
[sudo] password for berk:
You must disable secureboot for dkms installed modules
Daha fazla bilgi: https://launchpad.net/~kelebek333/+archive/ubuntu/kablosuz
Devam etmek için [ENTER] tuşuna, eklemeyi iptal etmek için Ctrl-c tuşlarına basınız.

Aynı:  1 http://tr.archive.ubuntu.com/ubuntu eoan InRelease
Aynı:  2 http://tr.archive.ubuntu.com/ubuntu eoan-updates InRelease           
Aynı:  3 http://tr.archive.ubuntu.com/ubuntu eoan-backports InRelease         
Aynı:  4 http://ppa.launchpad.net/kelebek333/kablosuz/ubuntu eoan InRelease   
İndir: 5 http://security.ubuntu.com/ubuntu eoan-security InRelease [97,5 kB]   
2 sn.'de 97,5 kB alındı (50,3 kB/s)                   
(null)
Paket listeleri okunuyor... Bitti
N: '/etc/apt/sources.list.d/' dizinindeki 'kelebek333-ubuntu-kablosuz-eoan.list.save' dosyası geçersiz bir dosya uzantısı olduğu için yok sayılıyor
berk@berk-HP-Laptop-15-ra0xx:~$ sudo apt-get update
Aynı:  1 http://tr.archive.ubuntu.com/ubuntu eoan InRelease
Aynı:  2 http://tr.archive.ubuntu.com/ubuntu eoan-updates InRelease                                       
Aynı:  3 http://tr.archive.ubuntu.com/ubuntu eoan-backports InRelease                                     
Aynı:  4 http://ppa.launchpad.net/kelebek333/kablosuz/ubuntu eoan InRelease                             
İndir: 5 http://security.ubuntu.com/ubuntu eoan-security InRelease [97,5 kB]   
2 sn.'de 97,5 kB alındı (49,0 kB/s)                   
Paket listeleri okunuyor... Bitti
N: '/etc/apt/sources.list.d/' dizinindeki 'kelebek333-ubuntu-kablosuz-eoan.list.save' dosyası geçersiz bir dosya uzantısı olduğu için yok sayılıyor
berk@berk-HP-Laptop-15-ra0xx:~$ sudo apt install rtl8723au-dkms
Paket listeleri okunuyor... Bitti
Bağımlılık ağacı oluşturuluyor       
Durum bilgisi okunuyor... Bitti     
rtl8723au-dkms zaten en yeni sürümde (0.1.1~eoan).
0 paket yükseltilecek, 0 yeni paket kurulacak, 0 paket kaldırılacak ve 0 paket yükseltilmeyecek.
N: '/etc/apt/sources.list.d/' dizinindeki 'kelebek333-ubuntu-kablosuz-eoan.list.save' dosyası geçersiz bir dosya uzantısı olduğu için yok sayılıyor
berk@berk-HP-Laptop-15-ra0xx:~$ sudo apt install rtl8723bu-dkms
Paket listeleri okunuyor... Bitti
Bağımlılık ağacı oluşturuluyor       
Durum bilgisi okunuyor... Bitti     
rtl8723bu-dkms zaten en yeni sürümde (4.3.6.11.1~eoan1).
0 paket yükseltilecek, 0 yeni paket kurulacak, 0 paket kaldırılacak ve 0 paket yükseltilmeyecek.
N: '/etc/apt/sources.list.d/' dizinindeki 'kelebek333-ubuntu-kablosuz-eoan.list.save' dosyası geçersiz bir dosya uzantısı olduğu için yok sayılıyor
berk@berk-HP-Laptop-15-ra0xx:~$ sudo apt install rtl8192cu-dkms
Paket listeleri okunuyor... Bitti
Bağımlılık ağacı oluşturuluyor       
Durum bilgisi okunuyor... Bitti     
rtl8192cu-dkms zaten en yeni sürümde (1.11~eoan).
0 paket yükseltilecek, 0 yeni paket kurulacak, 0 paket kaldırılacak ve 0 paket yükseltilmeyecek.
N: '/etc/apt/sources.list.d/' dizinindeki 'kelebek333-ubuntu-kablosuz-eoan.list.save' dosyası geçersiz bir dosya uzantısı olduğu için yok sayılıyor
berk@berk-HP-Laptop-15-ra0xx:~$


Sorunu çözemedim


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 22 Ocak 2020 - 18:18:37
Realteklerini hepsini kurdum değişen birşey olmadı

[speakerXXL]

Size bütün sürücüleri kurmanızı önermedim, sadece belirttiğim aygıt için olan sürücüyü kurunuz. Ayrıca bağlantıdaki uyarıları dikkate alınız. Aşağıdaki komutla kurduğunuz sürücüleri kaldırıp, sadece belirttiğim sürücüyü kurunuz.

Kod Seç Genişlet

sudo apt purge rtl*-dkms

[houseofcards]

Çok özür dilerim

[speakerXXL]

Secureboot özelliğini kapalı olacak ve sadece rtlwifi-new-extended-dkms paketini kuracaksınız, tek yapmanız gereken budur.

[houseofcards]

Secureboot özelliğini kapalı olacak ve sadece rtlwifi-new-extended-dkms paketini kuracaksınız, tek yapmanız gereken budur.

Çok teşekkür ederim.Aptalığıma verin yordum sizi.Normalde yazılırım okurum ama yorgunluktan hata yaptım.

[speakerXXL]

Estağfirullah, gözden kaçmış olabilir. Şimdi uyarı kısmını daha beligin yapalım ki gözden kaçmasın.

Yakın zamanda rtl8723de için ek sürücü kurulumuna gerek kalmayacak, samırım rtw88 sürücüsüne rtl8723de için destek eklenecek.

[houseofcards]

Secureboot özelliğini kapalı olacak ve sadece rtlwifi-new-extended-dkms paketini kuracaksınız, tek yapmanız gereken budur.

Dediğinizi yaptım. kablosuz ağ bağlantısı görünmüyor. Bunu kurdum

Kod Seç Genişlet

sudo apt install rtlwifi-new-extended-dkms 

[speakerXXL]

Sistemi yeniden başlattınız mı? Eğer başlatyıysanız, aşağıdaki komutların çıktısını paylaşın.

Kod Seç Genişlet

dkms status
modinfo rtl8723de
sudo modprobe rtl8723de

[houseofcards]

Kod Seç Genişlet

berk@berk-HP-Laptop-15-ra0xx:~$ dkms status
Error! Could not locate dkms.conf file.
File: /var/lib/dkms/rtl8188fu/1.0.4.1~eoan/source/dkms.conf does not exist.




Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 22 Ocak 2020 - 19:40:29

Kod Seç Genişlet

berk@berk-HP-Laptop-15-ra0xx:~$ modinfo rtl8723de
filename:       /lib/modules/5.3.0-26-generic/updates/dkms/rtl8723de.ko
firmware:       rtlwifi/rtl8723defw.bin
description:    Realtek 8723DE 802.11n PCI wireless
license:        GPL
author:         Realtek WlanFAE <wlanfae@realtek.com>
author:         PageHe <page_he@realsil.com.cn>
srcversion:     99CC08D9D1086FB0E409C67
alias:          pci:v000010ECd0000D723sv*sd*bc*sc*i*
depends:        rtlwifi,rtl_pci,btcoexist,rtl8723-common,phydm_mod
retpoline:      Y
name:           rtl8723de
vermagic:       5.3.0-26-generic SMP mod_unload
sig_id:         PKCS#7
signer:         ubuntu Secure Boot Module Signature key
sig_key:        12:32:E6:05:EF:03:97:D9:53:AF:B9:D8:0F:75:C1:23:77:39:C8:B5
sig_hashalgo:   sha512
signature:      7F:7C:48:C9:BE:D1:7C:68:B2:13:5B:56:A7:10:BE:C4:AB:46:64:DC:
53:BB:18:42:FF:1B:7E:2E:60:17:C4:60:5B:76:16:74:14:8C:C3:8F:
59:9D:AA:3C:A4:6B:A1:06:0F:4F:08:B7:04:EF:49:24:59:7B:35:CC:
01:58:E9:4D:5E:40:1B:D8:F8:38:BE:90:2D:AA:F7:83:20:4A:95:6D:
BA:85:B3:27:CA:CC:29:79:6F:A1:B3:62:A0:F0:CA:83:A3:70:8E:7C:
43:BF:D4:E0:15:86:37:FA:75:BC:66:8C:52:2B:13:91:5A:1F:03:A0:
06:62:CC:F9:02:90:61:00:80:15:26:EB:83:2E:5B:6D:A4:EC:B9:FB:
53:8A:E2:D1:4A:A6:3D:E7:4C:83:4C:BF:79:97:E7:90:3E:6D:1A:44:
49:98:F6:1E:D6:63:24:24:CD:20:29:61:D8:40:D7:D6:2D:31:B0:61:
8B:BB:E0:82:D7:BB:46:B3:7F:DB:08:F6:A5:4E:78:26:0F:C1:85:4E:
77:38:09:18:46:17:A4:60:FB:BD:7E:F8:16:AC:DF:7F:3D:D8:08:99:
2E:A1:BD:B8:A1:0B:3E:45:22:9D:D1:81:B3:3C:5B:4C:2B:BD:DD:78:
76:49:65:B8:5D:AC:60:C0:54:A1:D8:D9:36:14:56:04
parm:           dma64:bool
parm:           swenc:Set to 1 for software crypto (default 0)
(bool)
parm:           ips:Set to 0 to not use link power save (default 1)
(bool)
parm:           swlps:Set to 1 to use SW control power save (default 0)
(bool)
parm:           fwlps:Set to 1 to use FW control power save (default 1)
(bool)
parm:           msi:Set to 1 to use MSI interrupts mode (default 1)
(bool)
parm:           aspm:Set to 1 to enable ASPM (default 0)
(int)
parm:           debug_level:Set debug level (0-5) (default 0) (int)
parm:           debug_mask:Set debug mask (default 0) (ullong)
parm:           disable_watchdog:Set to 1 to disable the watchdog (default 0)
(bool)
parm:           int_clear:Set to 0 to disable interrupt clear before set (default 0)
(bool)
parm:           ant_sel:Set to 1 or 2 to force antenna number (default 0)
(int)




Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 22 Ocak 2020 - 19:41:03

Kod Seç Genişlet

berk@berk-HP-Laptop-15-ra0xx:~$ sudo modprobe rtl8723de
[sudo] password for berk:
modprobe: ERROR: could not insert 'rtl8723de': Operation not permitted



Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 22 Ocak 2020 - 19:41:45

Sistemi yeniden başlattınız mı? Eğer başlatyıysanız, aşağıdaki komutların çıktısını paylaşın.

Kod Seç Genişlet

dkms status
modinfo rtl8723de
sudo modprobe rtl8723de

Tekrar başlatıp açtıydım.

[speakerXXL]

modprobe: ERROR: could not insert 'rtl8723de': Operation not permitted

Secureboot özelliğini kapalı olacak ve sadece rtlwifi-new-extended-dkms paketini kuracaksınız, tek yapmanız gereken budur.

[houseofcards]

modprobe: ERROR: could not insert 'rtl8723de': Operation not permitted

Secureboot özelliğini kapalı olacak ve sadece rtlwifi-new-extended-dkms paketini kuracaksınız, tek yapmanız gereken budur.

Secureboot özelliğini kapalı olacak, secureboot  özelliğini nasıl kapıtıcam hiç bilmiyorum

[Empat]

[mention=651236]@houseofcards[/mention]
İnternette secure boot özelliğini kapatma ile ilgili birçok makale var. Eğer UEFI arayüzünüz eski ise bu veya şu makalede bulunan resimlerdeki gibi bir arayüzle karşılacaksınız.

[houseofcards]

[mention=651236]@houseofcards[/mention]
İnternette secure boot özelliğini kapatma ile ilgili birçok makale var. Eğer UEFI arayüzünüz eski ise bu veya şu makalede bulunan resimlerdeki gibi bir arayüzle karşılacaksınız.

Teşekkür ederim


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 22 Ocak 2020 - 21:39:44
Çok Teşekkür Ederim.Allah Razı Olsun sizden.