Kablosuz Ağ Kartı Kayboluyor

Başlatan berke4646, 24 Şubat 2019 - 12:25:12

« önceki - sonraki »

0 Üyeler ve 1 Ziyaretçi konuyu incelemekte.

berke4646

Merhabalar Wifi adaptörümü pcye bağladığımda ağlar gözüküyor ama 2 saniye sonra kayboluyor tekrar geliyor bu döngü hep devam ediyor problem nedir ? Sistemim Kali Linux ve usb boot değil normal olarak kurdum.

cat /etc/lsb-release
DISTRIB_ID=Kali
DISTRIB_RELEASE=kali-rolling
DISTRIB_CODENAME=kali-rolling
DISTRIB_DESCRIPTION="Kali GNU/Linux Rolling"


root@kali:~# cat /proc/cmdline
BOOT_IMAGE=/boot/vmlinuz-4.19.0-kali1-amd64 root=/dev/sda6 ro quiet


root@kali:~# uname -a
Linux kali 4.19.0-kali1-amd64 #1 SMP Debian 4.19.13-1kali1 (2019-01-03) x86_64 GNU/Linux


root@kali:~# lspci
00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 0b)
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b)
00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 0b)
00:14.0 USB controller: Intel Corporation 8 Series USB xHCI HC (rev 04)
00:16.0 Communication controller: Intel Corporation 8 Series HECI #0 (rev 04)
00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 3 (rev e4)
00:1c.3 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 4 (rev e4)
00:1c.4 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 5 (rev e4)
00:1d.0 USB controller: Intel Corporation 8 Series USB EHCI #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation 8 Series LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 8 Series SATA Controller 1 [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 8 Series SMBus Controller (rev 04)
01:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTL8411B PCI Express Card Reader (rev 01)
01:00.1 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 12)
02:00.0 Network controller: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter (rev 01)
03:00.0 3D controller: NVIDIA Corporation GF117M [GeForce 610M/710M/810M/820M / GT 620M/625M/630M/720M] (rev a1)


root@kali:~# lsusb
Bus 001 Device 002: ID 8087:8000 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 004: ID 1bcf:2c6e Sunplus Innovation Technology Inc.
Bus 002 Device 005: ID 04ca:300b Lite-On Technology Corp. Atheros AR3012 Bluetooth
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


root@kali:~# rfkill list
0: acer-wireless: Wireless LAN
Soft blocked: no
Hard blocked: no
1: acer-bluetooth: Bluetooth
Soft blocked: no
Hard blocked: no
2: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
4: hci0: Bluetooth
Soft blocked: no
Hard blocked: no


root@kali:~# sudo lshw -C network
sudo: lshw: komut bulunamadı


root@kali:~# ifconfig
eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether f8:a9:63:6d:04:56  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 96  bytes 7440 (7.2 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 96  bytes 7440 (7.2 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.0.100  netmask 255.255.255.0  broadcast 192.168.0.255
        inet6 fe80::baee:65ff:fe65:1c0b  prefixlen 64  scopeid 0x20<link>
        ether b8:ee:65:65:1c:0b  txqueuelen 1000  (Ethernet)
        RX packets 14656  bytes 15719742 (14.9 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 12789  bytes 1896841 (1.8 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wlan1: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether 5e:2c:fd:1f:43:95  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0


root@kali:~# iwconfig
eth0      no wireless extensions.

wlan1     IEEE 802.11  ESSID:off/any 
          Mode:Managed  Access Point: Not-Associated   Tx-Power=20 dBm   
          Retry short  long limit:2   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off
         
wlan0     IEEE 802.11  ESSID:"VodafoneMobileWiFi-947E58" 
          Mode:Managed  Frequency:2.417 GHz  Access Point: 80:13:82:63:94:7E   
          Bit Rate=72.2 Mb/s   Tx-Power=16 dBm   
          Retry short limit:7   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off
          Link Quality=53/70  Signal level=-57 dBm 
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:4  Invalid misc:2027   Missed beacon:0

lo        no wireless extensions.



root@kali:~# iwlist scanning
eth0      Interface doesn't support scanning.

wlan1     Failed to read scan data : No such device

wlan0     Scan completed :
          Cell 01 - Address: 80:13:82:63:94:7E
                    Channel:2
                    Frequency:2.417 GHz (Channel 2)
                    Quality=58/70  Signal level=-52 dBm 
                    Encryption key:on
                    ESSID:"VodafoneMobileWiFi-947E58"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
                              24 Mb/s; 36 Mb/s; 54 Mb/s
                    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
                    Mode:Master
                    Extra:tsf=000000003bde9e14
                    Extra: Last beacon: 140ms ago
                    IE: Unknown: 0019566F6461666F6E654D6F62696C65576946692D393437453538
                    IE: Unknown: 010882848B962430486C
                    IE: Unknown: 030102
                    IE: Unknown: 200100
                    IE: Unknown: 23021100
                    IE: Unknown: 2A0100
                    IE: Unknown: 2F0100
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : CCMP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                    IE: Unknown: 32040C121860
                    IE: Unknown: 2D1ABC011BFFFF000000000000000000000000000000000000000000
                    IE: Unknown: 3D1602080400000000000000000000000000000000000000
                    IE: Unknown: 4A0E14000A002C01C800140005001900
                    IE: Unknown: 7F0101
                    IE: Unknown: DD090010180201000C0000
                    IE: WPA Version 1
                        Group Cipher : CCMP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                    IE: Unknown: DD180050F202010187000132000027A4000042435E0062322F00
          Cell 02 - Address: 24:D3:F2:A3:65:7F
                    Channel:4
                    Frequency:2.427 GHz (Channel 4)
                    Quality=35/70  Signal level=-75 dBm 
                    Encryption key:on
                    ESSID:"DE1072"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 9 Mb/s
                              18 Mb/s; 36 Mb/s; 54 Mb/s
                    Bit Rates:6 Mb/s; 12 Mb/s; 24 Mb/s; 48 Mb/s
                    Mode:Master
                    Extra:tsf=000001bb90d18c98
                    Extra: Last beacon: 140ms ago
                    IE: Unknown: 0006444531303732
                    IE: Unknown: 010882848B961224486C
                    IE: Unknown: 030104
                    IE: Unknown: 2A0100
                    IE: Unknown: 32040C183060
                    IE: Unknown: 2D1A2C0017FFFF000000000000000000000000000000000000000000
                    IE: Unknown: 3D1604000400000000000000000000000000000000000000
                    IE: WPA Version 1
                        Group Cipher : CCMP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : CCMP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                    IE: Unknown: 7F080000000000000000
                    IE: Unknown: DD180050F2020101000003A4000027A4000042435E0062322F00
                    IE: Unknown: 0706545220010D10
                    IE: Unknown: DD07000C4300000000
          Cell 03 - Address: 24:D3:F2:A3:4F:6D
                    Channel:5
                    Frequency:2.432 GHz (Channel 5)
                    Quality=32/70  Signal level=-78 dBm 
                    Encryption key:on
                    ESSID:"FiberHGW_ZT7N9G_2.4GHz"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 9 Mb/s
                              18 Mb/s; 36 Mb/s; 54 Mb/s
                    Bit Rates:6 Mb/s; 12 Mb/s; 24 Mb/s; 48 Mb/s
                    Mode:Master
                    Extra:tsf=000001bb9115118e
                    Extra: Last beacon: 2120ms ago
                    IE: Unknown: 001646696265724847575F5A54374E39475F322E3447487A
                    IE: Unknown: 010882848B961224486C
                    IE: Unknown: 030105
                    IE: Unknown: 32040C183060
                    IE: Unknown: 0706545220010D14
                    IE: Unknown: 33082001020304050607
                    IE: Unknown: 33082105060708090A0B
                    IE: Unknown: 050400010000
                    IE: WPA Version 1
                        Group Cipher : CCMP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : CCMP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                    IE: Unknown: 2A0100
                    IE: Unknown: 2D1A2C0017FFFF000000000000000000000000000000000000000000
                    IE: Unknown: 3D1605000000000000000000000000000000000000000000
                    IE: Unknown: DD180050F2020101000003A4000027A4000042435E0062322F00
                    IE: Unknown: DD07000C4300000000
          Cell 04 - Address: 24:D3:F2:A3:53:69
                    Channel:8
                    Frequency:2.447 GHz (Channel 8)
                    Quality=31/70  Signal level=-79 dBm 
                    Encryption key:on
                    ESSID:"FiberHGW_ZTEN95_2.4GHz"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 9 Mb/s
                              18 Mb/s; 36 Mb/s; 54 Mb/s
                    Bit Rates:6 Mb/s; 12 Mb/s; 24 Mb/s; 48 Mb/s
                    Mode:Master
                    Extra:tsf=000000009126e1bf
                    Extra: Last beacon: 140ms ago
                    IE: Unknown: 001646696265724847575F5A54454E39355F322E3447487A
                    IE: Unknown: 010882848B961224486C
                    IE: Unknown: 030108
                    IE: Unknown: 2A0100
                    IE: Unknown: 32040C183060
                    IE: Unknown: 2D1A2C0017FFFF000000000000000000000000000000000000000000
                    IE: Unknown: 3D1608000700000000000000000000000000000000000000
                    IE: WPA Version 1
                        Group Cipher : CCMP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : CCMP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                    IE: Unknown: 7F080000000000000000
                    IE: Unknown: DD180050F2020101000003A4000027A4000042435E0062322F00
                    IE: Unknown: 0706545220010D10
                    IE: Unknown: DD7D0050F204104A0001101044000102103B00010310470010BC329E001DD811B2860124D3F2A35369102100035A54451023000C5A58484E20476174655761791024000456312E301042000831323334353637381054000800060050F2040001101100065A5445204150100800020380103C0001011049000600372A000120
                    IE: Unknown: DD07000C4300000000
          Cell 05 - Address: C4:71:54:66:BA:E2
                    Channel:11
                    Frequency:2.462 GHz (Channel 11)
                    Quality=30/70  Signal level=-80 dBm 
                    Encryption key:on
                    ESSID:"FiberHGW_TPBAE4_2.4GHz"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 9 Mb/s
                              18 Mb/s; 36 Mb/s; 54 Mb/s
                    Bit Rates:6 Mb/s; 12 Mb/s; 24 Mb/s; 48 Mb/s
                    Mode:Master
                    Extra:tsf=0000002763563b69
                    Extra: Last beacon: 140ms ago
                    IE: Unknown: 001646696265724847575F5450424145345F322E3447487A
                    IE: Unknown: 010882848B961224486C
                    IE: Unknown: 03010B
                    IE: Unknown: 2A0104
                    IE: Unknown: 32040C183060
                    IE: Unknown: 2D1AEC1117FFFF000001000000000000000000000000000000000000
                    IE: Unknown: 3D160B000700000000000000000000000000000000000000
                    IE: WPA Version 1
                        Group Cipher : CCMP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : CCMP
                        Pairwise Ciphers (1) : CCMP
                        Authentication Suites (1) : PSK
                    IE: Unknown: 7F080000000100000000
                    IE: Unknown: DD180050F2020101000003A4000027A4000042435E0062322F00
                    IE: Unknown: 4A0E14000A002C01C800140005001900
                    IE: Unknown: 7F080000000100000000
                    IE: Unknown: DD980050F204104A00011010440001021057000101103B0001031047001038833092309218839C77C4715466BAE41021000754502D4C494E4B1023000A4172636865722043357610240003312E3010420003312E301054000800060050F20400011011002041433132303020576972656C657373204475616C2042616E6420476967616269100800020000103C0001011049000600372A000120
                    IE: Unknown: DD07000C4303000000

lo        Interface doesn't support scanning.


root@kali:~# lsmod
Module                  Size  Used by
fuse                  122880  5
ctr                    16384  4
ccm                    20480  6
binfmt_misc            20480  1
nls_ascii              16384  1
nls_cp437              20480  1
vfat                   20480  1
fat                    86016  1 vfat
nouveau              2187264  2
snd_hda_codec_realtek   118784  1
snd_hda_codec_generic    86016  1 snd_hda_codec_realtek
snd_hda_codec_hdmi     57344  1
uvcvideo              118784  0
snd_hda_intel          45056  8
snd_hda_codec         151552  4 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_realtek
mxm_wmi                16384  1 nouveau
ath3k                  20480  0
rt2800usb              32768  0
arc4                   16384  2
btusb                  53248  0
videobuf2_vmalloc      16384  1 uvcvideo
ath9k                 118784  0
btrtl                  16384  1 btusb
btbcm                  16384  1 btusb
videobuf2_memops       16384  1 videobuf2_vmalloc
btintel                24576  1 btusb
ttm                   126976  1 nouveau
rt2x00usb              24576  1 rt2800usb
bluetooth             643072  6 btrtl,btintel,btbcm,ath3k,btusb
videobuf2_v4l2         28672  1 uvcvideo
snd_hda_core           94208  5 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek
drbg                   28672  1
ansi_cprng             16384  0
ath9k_common           20480  1 ath9k
rt2800lib             118784  1 rt2800usb
ecdh_generic           24576  1 bluetooth
videobuf2_common       53248  2 videobuf2_v4l2,uvcvideo
rt2x00lib              57344  3 rt2800usb,rt2x00usb,rt2800lib
crc_ccitt              16384  1 rt2800lib
videodev              212992  3 videobuf2_v4l2,uvcvideo,videobuf2_common
intel_rapl             24576  0
media                  45056  2 videodev,uvcvideo
snd_hwdep              16384  1 snd_hda_codec
ath9k_hw              487424  2 ath9k_common,ath9k
ath                    36864  3 ath9k_common,ath9k,ath9k_hw
snd_pcm               114688  4 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_core
mac80211              819200  4 ath9k,rt2x00lib,rt2x00usb,rt2800lib
rtsx_pci_ms            20480  0
x86_pkg_temp_thermal    16384  0
intel_powerclamp       16384  0
cfg80211              765952  5 ath9k_common,ath9k,rt2x00lib,ath,mac80211
coretemp               16384  0
snd_timer              36864  1 snd_pcm
snd                    94208  24 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hwdep,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek,snd_timer,snd_pcm
memstick               16384  1 rtsx_pci_ms
soundcore              16384  1 snd
kvm_intel             241664  0
acer_wmi               24576  0
mei_me                 45056  0
sg                     36864  0
kvm                   729088  1 kvm_intel
mei                   118784  1 mei_me
sparse_keymap          16384  1 acer_wmi
i915                 1728512  17
joydev                 24576  0
iTCO_wdt               16384  0
iTCO_vendor_support    16384  1 iTCO_wdt
drm_kms_helper        204800  2 i915,nouveau
drm                   483328  11 drm_kms_helper,i915,ttm,nouveau
i2c_algo_bit           16384  2 i915,nouveau
rfkill                 28672  7 acer_wmi,bluetooth,cfg80211
irqbypass              16384  1 kvm
evdev                  28672  25
serio_raw              16384  0
pcspkr                 16384  0
wmi_bmof               16384  0
ac                     16384  0
efi_pstore             16384  0
intel_cstate           16384  0
intel_uncore          135168  0
pcc_cpufreq            16384  0
intel_rapl_perf        16384  0
efivars                20480  1 efi_pstore
hid_multitouch         28672  0
wmi                    28672  4 acer_wmi,wmi_bmof,mxm_wmi,nouveau
button                 16384  1 nouveau
battery                24576  0
video                  45056  3 acer_wmi,i915,nouveau
efivarfs               16384  1
ip_tables              28672  0
x_tables               45056  1 ip_tables
autofs4                49152  2
ext4                  733184  1
crc16                  16384  2 bluetooth,ext4
mbcache                16384  1 ext4
jbd2                  122880  1 ext4
crc32c_generic         16384  0
fscrypto               32768  1 ext4
ecb                    16384  0
sr_mod                 28672  0
cdrom                  69632  1 sr_mod
sd_mod                 53248  4
crct10dif_pclmul       16384  0
crc32_pclmul           16384  0
crc32c_intel           24576  2
ghash_clmulni_intel    16384  0
pcbc                   16384  0
rtsx_pci_sdmmc         28672  0
hid_generic            16384  0
mmc_core              172032  1 rtsx_pci_sdmmc
aesni_intel           200704  4
ahci                   40960  3
i2c_i801               28672  0
libahci                40960  1 ahci
aes_x86_64             20480  1 aesni_intel
crypto_simd            16384  1 aesni_intel
cryptd                 28672  3 crypto_simd,ghash_clmulni_intel,aesni_intel
glue_helper            16384  1 aesni_intel
xhci_pci               16384  0
ehci_pci               16384  0
libata                278528  2 libahci,ahci
rtsx_pci               73728  2 rtsx_pci_sdmmc,rtsx_pci_ms
xhci_hcd              266240  1 xhci_pci
ehci_hcd               94208  1 ehci_pci
r8169                  90112  0
lpc_ich                28672  0
scsi_mod              249856  4 sd_mod,libata,sg,sr_mod
libphy                 77824  2 r8169
usbcore               290816  9 xhci_hcd,rt2800usb,ehci_pci,uvcvideo,ehci_hcd,ath3k,btusb,xhci_pci,rt2x00usb
usb_common             16384  1 usbcore
i2c_hid                24576  0
hid                   139264  3 i2c_hid,hid_multitouch,hid_generic


root@kali:~# dmesg
[  848.302392] usb 2-1: SerialNumber: 1.0
[  848.431705] usb 2-1: reset high-speed USB device number 52 using xhci_hcd
[  848.591271] ieee80211 phy420: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  848.601743] ieee80211 phy420: rt2x00_set_rf: Info - RF chipset 0005 detected
[  848.602112] ieee80211 phy420: Selected rate control algorithm 'minstrel_ht'
[  848.646331] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  848.646397] ieee80211 phy420: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  848.646428] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  848.646433] ieee80211 phy420: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  848.867854] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  849.145258] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  849.200288] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  849.244011] usb 2-1: USB disconnect, device number 52
[  850.227598] usb 2-1: new high-speed USB device number 53 using xhci_hcd
[  850.396778] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  850.396784] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  850.396788] usb 2-1: Product: 802.11 n WLAN
[  850.396792] usb 2-1: Manufacturer: Ralink
[  850.396794] usb 2-1: SerialNumber: 1.0
[  850.527846] usb 2-1: reset high-speed USB device number 53 using xhci_hcd
[  850.687443] ieee80211 phy421: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  850.697450] ieee80211 phy421: rt2x00_set_rf: Info - RF chipset 0005 detected
[  850.697832] ieee80211 phy421: Selected rate control algorithm 'minstrel_ht'
[  850.732880] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  850.732943] ieee80211 phy421: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  850.732975] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  850.732979] ieee80211 phy421: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  850.952104] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  851.174267] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  851.239147] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  851.284015] usb 2-1: USB disconnect, device number 53
[  852.275749] usb 2-1: new high-speed USB device number 54 using xhci_hcd
[  852.440817] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  852.440822] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  852.440826] usb 2-1: Product: 802.11 n WLAN
[  852.440829] usb 2-1: Manufacturer: Ralink
[  852.440832] usb 2-1: SerialNumber: 1.0
[  852.572220] usb 2-1: reset high-speed USB device number 54 using xhci_hcd
[  852.732493] ieee80211 phy422: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  852.743018] ieee80211 phy422: rt2x00_set_rf: Info - RF chipset 0005 detected
[  852.743492] ieee80211 phy422: Selected rate control algorithm 'minstrel_ht'
[  852.782159] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  852.782227] ieee80211 phy422: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  852.782273] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  852.782277] ieee80211 phy422: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  852.994319] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  853.272055] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  853.325313] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  853.372267] usb 2-1: USB disconnect, device number 54
[  854.351930] usb 2-1: new high-speed USB device number 55 using xhci_hcd
[  854.517052] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  854.517060] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  854.517064] usb 2-1: Product: 802.11 n WLAN
[  854.517068] usb 2-1: Manufacturer: Ralink
[  854.517071] usb 2-1: SerialNumber: 1.0
[  854.652139] usb 2-1: reset high-speed USB device number 55 using xhci_hcd
[  854.815866] ieee80211 phy423: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  854.826372] ieee80211 phy423: rt2x00_set_rf: Info - RF chipset 0005 detected
[  854.827671] ieee80211 phy423: Selected rate control algorithm 'minstrel_ht'
[  854.859861] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  854.859968] ieee80211 phy423: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  854.860021] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  854.860025] ieee80211 phy423: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  855.085197] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  855.304916] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  855.372404] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  855.416599] usb 2-1: USB disconnect, device number 55
[  856.392091] usb 2-1: new high-speed USB device number 56 using xhci_hcd
[  856.557076] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  856.557083] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  856.557087] usb 2-1: Product: 802.11 n WLAN
[  856.557091] usb 2-1: Manufacturer: Ralink
[  856.557094] usb 2-1: SerialNumber: 1.0
[  856.692407] usb 2-1: reset high-speed USB device number 56 using xhci_hcd
[  856.853154] ieee80211 phy424: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  856.863492] ieee80211 phy424: rt2x00_set_rf: Info - RF chipset 0005 detected
[  856.864405] ieee80211 phy424: Selected rate control algorithm 'minstrel_ht'
[  856.904490] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  856.904550] ieee80211 phy424: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  856.904596] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  856.904600] ieee80211 phy424: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  857.114416] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  857.338175] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  857.393888] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  857.440761] usb 2-1: USB disconnect, device number 56
[  858.408249] usb 2-1: new high-speed USB device number 57 using xhci_hcd
[  858.577497] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  858.577504] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  858.577508] usb 2-1: Product: 802.11 n WLAN
[  858.577513] usb 2-1: Manufacturer: Ralink
[  858.577516] usb 2-1: SerialNumber: 1.0
[  858.708511] usb 2-1: reset high-speed USB device number 57 using xhci_hcd
[  858.868150] ieee80211 phy425: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  858.878629] ieee80211 phy425: rt2x00_set_rf: Info - RF chipset 0005 detected
[  858.879121] ieee80211 phy425: Selected rate control algorithm 'minstrel_ht'
[  858.918319] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  858.918389] ieee80211 phy425: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  858.918436] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  858.918441] ieee80211 phy425: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  859.142202] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  859.422642] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  859.473907] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  859.520728] usb 2-1: USB disconnect, device number 57
[  860.492492] usb 2-1: new high-speed USB device number 58 using xhci_hcd
[  860.657660] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  860.657674] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  860.657679] usb 2-1: Product: 802.11 n WLAN
[  860.657685] usb 2-1: Manufacturer: Ralink
[  860.657692] usb 2-1: SerialNumber: 1.0
[  860.788755] usb 2-1: reset high-speed USB device number 58 using xhci_hcd
[  860.948890] ieee80211 phy426: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  860.959342] ieee80211 phy426: rt2x00_set_rf: Info - RF chipset 0005 detected
[  860.959750] ieee80211 phy426: Selected rate control algorithm 'minstrel_ht'
[  860.996129] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  860.996192] ieee80211 phy426: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  860.996223] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  860.996227] ieee80211 phy426: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  861.204193] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  861.423644] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  861.489176] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  861.537018] usb 2-1: USB disconnect, device number 58
[  862.516574] usb 2-1: new high-speed USB device number 59 using xhci_hcd
[  862.681726] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  862.681737] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  862.681743] usb 2-1: Product: 802.11 n WLAN
[  862.681749] usb 2-1: Manufacturer: Ralink
[  862.681757] usb 2-1: SerialNumber: 1.0
[  862.812816] usb 2-1: reset high-speed USB device number 59 using xhci_hcd
[  862.973605] ieee80211 phy427: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  862.983566] ieee80211 phy427: rt2x00_set_rf: Info - RF chipset 0005 detected
[  862.983933] ieee80211 phy427: Selected rate control algorithm 'minstrel_ht'
[  863.025377] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  863.025439] ieee80211 phy427: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  863.025483] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  863.025486] ieee80211 phy427: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  863.237316] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  863.452752] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  863.511331] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  863.559271] usb 2-1: USB disconnect, device number 59
[  863.996696] usb 2-1: new high-speed USB device number 60 using xhci_hcd
[  864.161846] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  864.161852] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  864.161856] usb 2-1: Product: 802.11 n WLAN
[  864.161860] usb 2-1: Manufacturer: Ralink
[  864.161864] usb 2-1: SerialNumber: 1.0
[  864.292881] usb 2-1: reset high-speed USB device number 60 using xhci_hcd
[  864.452814] ieee80211 phy428: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  864.463400] ieee80211 phy428: rt2x00_set_rf: Info - RF chipset 0005 detected
[  864.463698] ieee80211 phy428: Selected rate control algorithm 'minstrel_ht'
[  864.498770] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  864.498836] ieee80211 phy428: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  864.498879] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  864.498882] ieee80211 phy428: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  864.714300] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  864.930659] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  864.977064] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  865.021276] usb 2-1: USB disconnect, device number 60
[  865.980864] usb 2-1: new high-speed USB device number 61 using xhci_hcd
[  866.145908] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  866.145913] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  866.145917] usb 2-1: Product: 802.11 n WLAN
[  866.145919] usb 2-1: Manufacturer: Ralink
[  866.145922] usb 2-1: SerialNumber: 1.0
[  866.277159] usb 2-1: reset high-speed USB device number 61 using xhci_hcd
[  866.440775] ieee80211 phy429: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  866.451043] ieee80211 phy429: rt2x00_set_rf: Info - RF chipset 0005 detected
[  866.451376] ieee80211 phy429: Selected rate control algorithm 'minstrel_ht'
[  866.482351] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  866.482416] ieee80211 phy429: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  866.482460] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  866.482464] ieee80211 phy429: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  866.698693] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  866.915907] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  866.965870] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  867.013559] usb 2-1: USB disconnect, device number 61
[  867.985020] usb 2-1: new high-speed USB device number 62 using xhci_hcd
[  868.154574] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  868.154580] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  868.154583] usb 2-1: Product: 802.11 n WLAN
[  868.154585] usb 2-1: Manufacturer: Ralink
[  868.154588] usb 2-1: SerialNumber: 1.0
[  868.285464] usb 2-1: reset high-speed USB device number 62 using xhci_hcd
[  868.446084] ieee80211 phy430: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  868.456501] ieee80211 phy430: rt2x00_set_rf: Info - RF chipset 0005 detected
[  868.456875] ieee80211 phy430: Selected rate control algorithm 'minstrel_ht'
[  868.498645] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  868.498710] ieee80211 phy430: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  868.498758] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  868.498762] ieee80211 phy430: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  868.723901] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  868.955647] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  869.005930] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  869.049665] usb 2-1: USB disconnect, device number 62
[  870.005183] usb 2-1: new high-speed USB device number 63 using xhci_hcd
[  870.170280] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  870.170283] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  870.170284] usb 2-1: Product: 802.11 n WLAN
[  870.170285] usb 2-1: Manufacturer: Ralink
[  870.170287] usb 2-1: SerialNumber: 1.0
[  870.301454] usb 2-1: reset high-speed USB device number 63 using xhci_hcd
[  870.462311] ieee80211 phy431: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  870.473013] ieee80211 phy431: rt2x00_set_rf: Info - RF chipset 0005 detected
[  870.473481] ieee80211 phy431: Selected rate control algorithm 'minstrel_ht'
[  870.510607] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  870.510674] ieee80211 phy431: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  870.510732] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  870.510737] ieee80211 phy431: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  870.735924] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  871.018848] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  871.070207] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  871.113653] usb 2-1: USB disconnect, device number 63
[  872.101378] usb 2-1: new high-speed USB device number 64 using xhci_hcd
[  872.266389] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  872.266396] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  872.266400] usb 2-1: Product: 802.11 n WLAN
[  872.266403] usb 2-1: Manufacturer: Ralink
[  872.266407] usb 2-1: SerialNumber: 1.0
[  872.397640] usb 2-1: reset high-speed USB device number 64 using xhci_hcd
[  872.561335] ieee80211 phy432: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  872.571837] ieee80211 phy432: rt2x00_set_rf: Info - RF chipset 0005 detected
[  872.572263] ieee80211 phy432: Selected rate control algorithm 'minstrel_ht'
[  872.609846] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  872.609912] ieee80211 phy432: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  872.609938] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  872.609942] ieee80211 phy432: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  872.818489] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  873.102231] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  873.161190] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  873.205779] usb 2-1: USB disconnect, device number 64
[  874.169545] usb 2-1: new high-speed USB device number 65 using xhci_hcd
[  874.334885] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  874.334891] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  874.334895] usb 2-1: Product: 802.11 n WLAN
[  874.334899] usb 2-1: Manufacturer: Ralink
[  874.334902] usb 2-1: SerialNumber: 1.0
[  874.469742] usb 2-1: reset high-speed USB device number 65 using xhci_hcd
[  874.633527] ieee80211 phy433: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  874.645755] ieee80211 phy433: rt2x00_set_rf: Info - RF chipset 0005 detected
[  874.646142] ieee80211 phy433: Selected rate control algorithm 'minstrel_ht'
[  874.689233] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  874.689295] ieee80211 phy433: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  874.689340] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  874.689344] ieee80211 phy433: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  874.903165] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  875.128163] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  875.191391] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  875.234045] usb 2-1: USB disconnect, device number 65
[  876.217805] usb 2-1: new high-speed USB device number 66 using xhci_hcd
[  876.383010] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  876.383023] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  876.383030] usb 2-1: Product: 802.11 n WLAN
[  876.383036] usb 2-1: Manufacturer: Ralink
[  876.383039] usb 2-1: SerialNumber: 1.0
[  876.517997] usb 2-1: reset high-speed USB device number 66 using xhci_hcd
[  876.677928] ieee80211 phy434: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  876.688861] ieee80211 phy434: rt2x00_set_rf: Info - RF chipset 0005 detected
[  876.689263] ieee80211 phy434: Selected rate control algorithm 'minstrel_ht'
[  876.721782] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  876.721848] ieee80211 phy434: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  876.721874] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  876.721878] ieee80211 phy434: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  876.936109] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  877.220285] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  877.270549] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  877.318147] usb 2-1: USB disconnect, device number 66
[  878.277904] usb 2-1: new high-speed USB device number 67 using xhci_hcd
[  878.442968] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  878.442975] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  878.442979] usb 2-1: Product: 802.11 n WLAN
[  878.442983] usb 2-1: Manufacturer: Ralink
[  878.442986] usb 2-1: SerialNumber: 1.0
[  878.574182] usb 2-1: reset high-speed USB device number 67 using xhci_hcd
[  878.734030] ieee80211 phy435: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  878.744460] ieee80211 phy435: rt2x00_set_rf: Info - RF chipset 0005 detected
[  878.744784] ieee80211 phy435: Selected rate control algorithm 'minstrel_ht'
[  878.790697] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  878.790764] ieee80211 phy435: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  878.790807] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  878.790811] ieee80211 phy435: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  879.016472] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  879.300847] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  879.350287] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  879.398404] usb 2-1: USB disconnect, device number 67
[  880.366078] usb 2-1: new high-speed USB device number 68 using xhci_hcd
[  880.531072] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  880.531078] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  880.531082] usb 2-1: Product: 802.11 n WLAN
[  880.531086] usb 2-1: Manufacturer: Ralink
[  880.531090] usb 2-1: SerialNumber: 1.0
[  880.662353] usb 2-1: reset high-speed USB device number 68 using xhci_hcd
[  880.821978] ieee80211 phy436: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  880.832352] ieee80211 phy436: rt2x00_set_rf: Info - RF chipset 0005 detected
[  880.832870] ieee80211 phy436: Selected rate control algorithm 'minstrel_ht'
[  880.866568] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  880.866630] ieee80211 phy436: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  880.866674] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  880.866677] ieee80211 phy436: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  881.082395] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  881.372298] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  881.423976] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  881.470733] usb 2-1: USB disconnect, device number 68
[  882.446336] usb 2-1: new high-speed USB device number 69 using xhci_hcd
[  882.615746] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  882.615753] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  882.615757] usb 2-1: Product: 802.11 n WLAN
[  882.615760] usb 2-1: Manufacturer: Ralink
[  882.615764] usb 2-1: SerialNumber: 1.0
[  882.746533] usb 2-1: reset high-speed USB device number 69 using xhci_hcd
[  882.906307] ieee80211 phy437: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  882.916450] ieee80211 phy437: rt2x00_set_rf: Info - RF chipset 0005 detected
[  882.916823] ieee80211 phy437: Selected rate control algorithm 'minstrel_ht'
[  882.953360] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  882.953426] ieee80211 phy437: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  882.953478] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  882.953481] ieee80211 phy437: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  883.160222] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  883.372396] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  883.437929] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  883.482649] usb 2-1: USB disconnect, device number 69
[  884.474419] usb 2-1: new high-speed USB device number 70 using xhci_hcd
[  884.639457] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  884.639462] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  884.639466] usb 2-1: Product: 802.11 n WLAN
[  884.639469] usb 2-1: Manufacturer: Ralink
[  884.639472] usb 2-1: SerialNumber: 1.0
[  884.774638] usb 2-1: reset high-speed USB device number 70 using xhci_hcd
[  884.934574] ieee80211 phy438: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  884.944846] ieee80211 phy438: rt2x00_set_rf: Info - RF chipset 0005 detected
[  884.945255] ieee80211 phy438: Selected rate control algorithm 'minstrel_ht'
[  884.979055] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  884.979118] ieee80211 phy438: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  884.979164] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  884.979168] ieee80211 phy438: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  885.199839] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  885.479482] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  885.544148] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  885.587030] usb 2-1: USB disconnect, device number 70
[  886.594606] usb 2-1: new high-speed USB device number 71 using xhci_hcd
[  886.767635] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  886.767642] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  886.767646] usb 2-1: Product: 802.11 n WLAN
[  886.767649] usb 2-1: Manufacturer: Ralink
[  886.767653] usb 2-1: SerialNumber: 1.0
[  886.902896] usb 2-1: reset high-speed USB device number 71 using xhci_hcd
[  887.063152] ieee80211 phy439: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  887.073266] ieee80211 phy439: rt2x00_set_rf: Info - RF chipset 0005 detected
[  887.073582] ieee80211 phy439: Selected rate control algorithm 'minstrel_ht'
[  887.108965] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  887.109029] ieee80211 phy439: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  887.109074] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  887.109078] ieee80211 phy439: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  887.331853] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  887.556900] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  887.607977] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  887.651027] usb 2-1: USB disconnect, device number 71
[  888.634790] usb 2-1: new high-speed USB device number 72 using xhci_hcd
[  888.804038] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  888.804046] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  888.804050] usb 2-1: Product: 802.11 n WLAN
[  888.804054] usb 2-1: Manufacturer: Ralink
[  888.804057] usb 2-1: SerialNumber: 1.0
[  888.935077] usb 2-1: reset high-speed USB device number 72 using xhci_hcd
[  889.094601] ieee80211 phy440: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  889.104723] ieee80211 phy440: rt2x00_set_rf: Info - RF chipset 0005 detected
[  889.105092] ieee80211 phy440: Selected rate control algorithm 'minstrel_ht'
[  889.157415] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  889.157478] ieee80211 phy440: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  889.157506] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  889.157510] ieee80211 phy440: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  889.363709] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  889.584346] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  889.635678] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  889.679451] usb 2-1: USB disconnect, device number 72
[  890.631066] usb 2-1: new high-speed USB device number 73 using xhci_hcd
[  890.800629] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  890.800638] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  890.800645] usb 2-1: Product: 802.11 n WLAN
[  890.800650] usb 2-1: Manufacturer: Ralink
[  890.800656] usb 2-1: SerialNumber: 1.0
[  890.931445] usb 2-1: reset high-speed USB device number 73 using xhci_hcd
[  891.094969] ieee80211 phy441: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  891.105880] ieee80211 phy441: rt2x00_set_rf: Info - RF chipset 0005 detected
[  891.106122] ieee80211 phy441: Selected rate control algorithm 'minstrel_ht'
[  891.136442] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  891.136510] ieee80211 phy441: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  891.136549] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  891.136553] ieee80211 phy441: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  891.371410] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  891.597533] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  891.652851] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  891.699455] usb 2-1: USB disconnect, device number 73
[  892.683166] usb 2-1: new high-speed USB device number 74 using xhci_hcd
[  892.848595] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  892.848606] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  892.848614] usb 2-1: Product: 802.11 n WLAN
[  892.848618] usb 2-1: Manufacturer: Ralink
[  892.848621] usb 2-1: SerialNumber: 1.0
[  892.983409] usb 2-1: reset high-speed USB device number 74 using xhci_hcd
[  893.143110] ieee80211 phy442: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  893.157502] ieee80211 phy442: rt2x00_set_rf: Info - RF chipset 0005 detected
[  893.157734] ieee80211 phy442: Selected rate control algorithm 'minstrel_ht'
[  893.184128] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  893.184193] ieee80211 phy442: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  893.184240] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  893.184244] ieee80211 phy442: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  893.395893] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  893.685623] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  893.732261] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  893.775654] usb 2-1: USB disconnect, device number 74
[  894.731347] usb 2-1: new high-speed USB device number 75 using xhci_hcd
[  894.896419] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  894.896426] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  894.896430] usb 2-1: Product: 802.11 n WLAN
[  894.896434] usb 2-1: Manufacturer: Ralink
[  894.896437] usb 2-1: SerialNumber: 1.0
[  895.027717] usb 2-1: reset high-speed USB device number 75 using xhci_hcd
[  895.191248] ieee80211 phy443: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  895.201850] ieee80211 phy443: rt2x00_set_rf: Info - RF chipset 0005 detected
[  895.202203] ieee80211 phy443: Selected rate control algorithm 'minstrel_ht'
[  895.245936] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  895.246513] ieee80211 phy443: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  895.246564] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  895.246569] ieee80211 phy443: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  895.460911] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  895.680367] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  895.732658] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  895.775808] usb 2-1: USB disconnect, device number 75
[  896.771548] usb 2-1: new high-speed USB device number 76 using xhci_hcd
[  896.936597] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  896.936603] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  896.936608] usb 2-1: Product: 802.11 n WLAN
[  896.936611] usb 2-1: Manufacturer: Ralink
[  896.936615] usb 2-1: SerialNumber: 1.0
[  897.067802] usb 2-1: reset high-speed USB device number 76 using xhci_hcd
[  897.227464] ieee80211 phy444: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  897.237691] ieee80211 phy444: rt2x00_set_rf: Info - RF chipset 0005 detected
[  897.238087] ieee80211 phy444: Selected rate control algorithm 'minstrel_ht'
[  897.280661] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  897.280727] ieee80211 phy444: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  897.280774] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  897.280778] ieee80211 phy444: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  897.506200] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  897.782364] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  897.833621] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  897.883918] usb 2-1: USB disconnect, device number 76
[  898.859702] usb 2-1: new high-speed USB device number 77 using xhci_hcd
[  899.024706] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  899.024710] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  899.024713] usb 2-1: Product: 802.11 n WLAN
[  899.024716] usb 2-1: Manufacturer: Ralink
[  899.024718] usb 2-1: SerialNumber: 1.0
[  899.159898] usb 2-1: reset high-speed USB device number 77 using xhci_hcd
[  899.323745] ieee80211 phy445: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  899.333688] ieee80211 phy445: rt2x00_set_rf: Info - RF chipset 0005 detected
[  899.333984] ieee80211 phy445: Selected rate control algorithm 'minstrel_ht'
[  899.397324] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  899.397394] ieee80211 phy445: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  899.397425] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  899.397430] ieee80211 phy445: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  899.623870] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  899.843647] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  899.896610] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  899.940165] usb 2-1: USB disconnect, device number 77
[  900.915916] usb 2-1: new high-speed USB device number 78 using xhci_hcd
[  901.081120] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  901.081126] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  901.081129] usb 2-1: Product: 802.11 n WLAN
[  901.081132] usb 2-1: Manufacturer: Ralink
[  901.081135] usb 2-1: SerialNumber: 1.0
[  901.212319] usb 2-1: reset high-speed USB device number 78 using xhci_hcd
[  901.371817] ieee80211 phy446: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  901.382272] ieee80211 phy446: rt2x00_set_rf: Info - RF chipset 0005 detected
[  901.382674] ieee80211 phy446: Selected rate control algorithm 'minstrel_ht'
[  901.415858] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  901.415937] ieee80211 phy446: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  901.415984] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  901.415989] ieee80211 phy446: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  901.634614] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  901.914277] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  901.975904] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  902.020580] usb 2-1: USB disconnect, device number 78
[  903.008099] usb 2-1: new high-speed USB device number 79 using xhci_hcd
[  903.173919] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  903.173926] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  903.173930] usb 2-1: Product: 802.11 n WLAN
[  903.173933] usb 2-1: Manufacturer: Ralink
[  903.173937] usb 2-1: SerialNumber: 1.0
[  903.304375] usb 2-1: reset high-speed USB device number 79 using xhci_hcd
[  903.467980] ieee80211 phy447: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  903.478419] ieee80211 phy447: rt2x00_set_rf: Info - RF chipset 0005 detected
[  903.479352] ieee80211 phy447: Selected rate control algorithm 'minstrel_ht'
[  903.511836] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  903.511900] ieee80211 phy447: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  903.511946] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  903.511950] ieee80211 phy447: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  903.730723] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  903.958530] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  904.008647] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  904.052539] usb 2-1: USB disconnect, device number 79
[  905.024372] usb 2-1: new high-speed USB device number 80 using xhci_hcd
[  905.189554] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  905.189565] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  905.189570] usb 2-1: Product: 802.11 n WLAN
[  905.189575] usb 2-1: Manufacturer: Ralink
[  905.189580] usb 2-1: SerialNumber: 1.0
[  905.320573] usb 2-1: reset high-speed USB device number 80 using xhci_hcd
[  905.480273] ieee80211 phy448: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  905.490899] ieee80211 phy448: rt2x00_set_rf: Info - RF chipset 0005 detected
[  905.491311] ieee80211 phy448: Selected rate control algorithm 'minstrel_ht'
[  905.531299] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  905.531374] ieee80211 phy448: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  905.531420] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  905.531424] ieee80211 phy448: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  905.742497] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  905.958181] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  906.020588] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  906.064794] usb 2-1: USB disconnect, device number 80
[  907.056489] usb 2-1: new high-speed USB device number 81 using xhci_hcd
[  907.221766] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  907.221773] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  907.221777] usb 2-1: Product: 802.11 n WLAN
[  907.221781] usb 2-1: Manufacturer: Ralink
[  907.221784] usb 2-1: SerialNumber: 1.0
[  907.352839] usb 2-1: reset high-speed USB device number 81 using xhci_hcd
[  907.516357] ieee80211 phy449: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  907.526760] ieee80211 phy449: rt2x00_set_rf: Info - RF chipset 0005 detected
[  907.527084] ieee80211 phy449: Selected rate control algorithm 'minstrel_ht'
[  907.569873] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  907.569937] ieee80211 phy449: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  907.569962] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  907.569966] ieee80211 phy449: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  907.787007] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  908.004418] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  908.053904] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  908.101050] usb 2-1: USB disconnect, device number 81
[  909.052736] usb 2-1: new high-speed USB device number 82 using xhci_hcd
[  909.217844] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  909.217852] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  909.217858] usb 2-1: Product: 802.11 n WLAN
[  909.217864] usb 2-1: Manufacturer: Ralink
[  909.217868] usb 2-1: SerialNumber: 1.0
[  909.348947] usb 2-1: reset high-speed USB device number 82 using xhci_hcd
[  909.509589] ieee80211 phy450: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  909.519940] ieee80211 phy450: rt2x00_set_rf: Info - RF chipset 0005 detected
[  909.520356] ieee80211 phy450: Selected rate control algorithm 'minstrel_ht'
[  909.562000] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  909.562060] ieee80211 phy450: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  909.562097] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  909.562101] ieee80211 phy450: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  909.776864] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  910.053797] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  910.109518] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  910.157054] usb 2-1: USB disconnect, device number 82
[  911.124857] usb 2-1: new high-speed USB device number 83 using xhci_hcd
[  911.290605] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  911.290612] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  911.290616] usb 2-1: Product: 802.11 n WLAN
[  911.290620] usb 2-1: Manufacturer: Ralink
[  911.290624] usb 2-1: SerialNumber: 1.0
[  911.425137] usb 2-1: reset high-speed USB device number 83 using xhci_hcd
[  911.588887] ieee80211 phy451: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  911.600365] ieee80211 phy451: rt2x00_set_rf: Info - RF chipset 0005 detected
[  911.600655] ieee80211 phy451: Selected rate control algorithm 'minstrel_ht'
[  911.638067] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  911.638131] ieee80211 phy451: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  911.638166] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  911.638170] ieee80211 phy451: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  911.850814] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  912.082995] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  912.129274] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  912.177308] usb 2-1: USB disconnect, device number 83
[  913.141065] usb 2-1: new high-speed USB device number 84 using xhci_hcd
[  913.305990] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  913.305995] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  913.305997] usb 2-1: Product: 802.11 n WLAN
[  913.305999] usb 2-1: Manufacturer: Ralink
[  913.306002] usb 2-1: SerialNumber: 1.0
[  913.433247] usb 2-1: reset high-speed USB device number 84 using xhci_hcd
[  913.592910] ieee80211 phy452: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  913.603213] ieee80211 phy452: rt2x00_set_rf: Info - RF chipset 0005 detected
[  913.603585] ieee80211 phy452: Selected rate control algorithm 'minstrel_ht'
[  913.642178] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  913.642243] ieee80211 phy452: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  913.642278] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  913.642282] ieee80211 phy452: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  913.854380] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  914.075214] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  914.138018] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  914.181433] usb 2-1: USB disconnect, device number 84
[  915.157229] usb 2-1: new high-speed USB device number 85 using xhci_hcd
[  915.326310] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  915.326317] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  915.326321] usb 2-1: Product: 802.11 n WLAN
[  915.326325] usb 2-1: Manufacturer: Ralink
[  915.326328] usb 2-1: SerialNumber: 1.0
[  915.457606] usb 2-1: reset high-speed USB device number 85 using xhci_hcd
[  915.622045] ieee80211 phy453: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  915.632335] ieee80211 phy453: rt2x00_set_rf: Info - RF chipset 0005 detected
[  915.632648] ieee80211 phy453: Selected rate control algorithm 'minstrel_ht'
[  915.665523] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  915.665586] ieee80211 phy453: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  915.665631] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  915.665635] ieee80211 phy453: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  915.891206] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  916.109654] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  916.186142] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  916.233886] usb 2-1: USB disconnect, device number 85
[  917.213490] usb 2-1: new high-speed USB device number 86 using xhci_hcd
[  917.391060] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  917.391068] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  917.391073] usb 2-1: Product: 802.11 n WLAN
[  917.391077] usb 2-1: Manufacturer: Ralink
[  917.391082] usb 2-1: SerialNumber: 1.0
[  917.525735] usb 2-1: reset high-speed USB device number 86 using xhci_hcd
[  917.686116] ieee80211 phy454: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  917.696690] ieee80211 phy454: rt2x00_set_rf: Info - RF chipset 0005 detected
[  917.697038] ieee80211 phy454: Selected rate control algorithm 'minstrel_ht'
[  917.734302] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  917.734367] ieee80211 phy454: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  917.734406] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  917.734410] ieee80211 phy454: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  917.943745] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  918.171004] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  918.237747] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  918.281941] usb 2-1: USB disconnect, device number 86
[  919.245621] usb 2-1: new high-speed USB device number 87 using xhci_hcd
[  919.410642] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  919.410647] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  919.410649] usb 2-1: Product: 802.11 n WLAN
[  919.410652] usb 2-1: Manufacturer: Ralink
[  919.410654] usb 2-1: SerialNumber: 1.0
[  919.545922] usb 2-1: reset high-speed USB device number 87 using xhci_hcd
[  919.705497] ieee80211 phy455: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  919.715827] ieee80211 phy455: rt2x00_set_rf: Info - RF chipset 0005 detected
[  919.716218] ieee80211 phy455: Selected rate control algorithm 'minstrel_ht'
[  919.753928] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  919.753992] ieee80211 phy455: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  919.754036] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  919.754040] ieee80211 phy455: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  919.970155] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  920.247285] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  920.307513] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  920.350046] usb 2-1: USB disconnect, device number 87
[  921.333826] usb 2-1: new high-speed USB device number 88 using xhci_hcd
[  921.499048] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  921.499055] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  921.499059] usb 2-1: Product: 802.11 n WLAN
[  921.499062] usb 2-1: Manufacturer: Ralink
[  921.499066] usb 2-1: SerialNumber: 1.0
[  921.630067] usb 2-1: reset high-speed USB device number 88 using xhci_hcd
[  921.790079] ieee80211 phy456: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  921.800446] ieee80211 phy456: rt2x00_set_rf: Info - RF chipset 0005 detected
[  921.800810] ieee80211 phy456: Selected rate control algorithm 'minstrel_ht'
[  921.839441] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  921.839513] ieee80211 phy456: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  921.839565] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  921.839570] ieee80211 phy456: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  922.045811] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  922.329689] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  922.374972] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  922.418296] usb 2-1: USB disconnect, device number 88
[  923.394093] usb 2-1: new high-speed USB device number 89 using xhci_hcd
[  923.559468] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  923.559477] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  923.559484] usb 2-1: Product: 802.11 n WLAN
[  923.559488] usb 2-1: Manufacturer: Ralink
[  923.559491] usb 2-1: SerialNumber: 1.0
[  923.690336] usb 2-1: reset high-speed USB device number 89 using xhci_hcd
[  923.854570] ieee80211 phy457: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  923.864348] ieee80211 phy457: rt2x00_set_rf: Info - RF chipset 0005 detected
[  923.864601] ieee80211 phy457: Selected rate control algorithm 'minstrel_ht'
[  923.894898] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  923.894958] ieee80211 phy457: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  923.894996] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  923.895000] ieee80211 phy457: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  924.108595] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  924.328692] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  924.382718] usb 2-1: USB disconnect, device number 89
[  924.395436] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  925.350209] usb 2-1: new high-speed USB device number 90 using xhci_hcd
[  925.516072] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  925.516078] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  925.516082] usb 2-1: Product: 802.11 n WLAN
[  925.516085] usb 2-1: Manufacturer: Ralink
[  925.516088] usb 2-1: SerialNumber: 1.0
[  925.650418] usb 2-1: reset high-speed USB device number 90 using xhci_hcd
[  925.814086] ieee80211 phy458: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  925.824448] ieee80211 phy458: rt2x00_set_rf: Info - RF chipset 0005 detected
[  925.824798] ieee80211 phy458: Selected rate control algorithm 'minstrel_ht'
[  925.861417] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  925.861485] ieee80211 phy458: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  925.861532] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  925.861537] ieee80211 phy458: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  926.072735] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  926.292672] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  926.359952] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  926.406816] usb 2-1: USB disconnect, device number 90
[  927.398409] usb 2-1: new high-speed USB device number 91 using xhci_hcd
[  927.563422] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  927.563426] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  927.563429] usb 2-1: Product: 802.11 n WLAN
[  927.563430] usb 2-1: Manufacturer: Ralink
[  927.563432] usb 2-1: SerialNumber: 1.0
[  927.694660] usb 2-1: reset high-speed USB device number 91 using xhci_hcd
[  927.854315] ieee80211 phy459: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  927.864721] ieee80211 phy459: rt2x00_set_rf: Info - RF chipset 0005 detected
[  927.865786] ieee80211 phy459: Selected rate control algorithm 'minstrel_ht'
[  927.904986] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  927.905055] ieee80211 phy459: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  927.905085] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  927.905089] ieee80211 phy459: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  928.111584] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  928.328295] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  928.391363] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  928.434926] usb 2-1: USB disconnect, device number 91
[  929.402681] usb 2-1: new high-speed USB device number 92 using xhci_hcd
[  929.571594] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  929.571600] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  929.571604] usb 2-1: Product: 802.11 n WLAN
[  929.571607] usb 2-1: Manufacturer: Ralink
[  929.571610] usb 2-1: SerialNumber: 1.0
[  929.703043] usb 2-1: reset high-speed USB device number 92 using xhci_hcd
[  929.862560] ieee80211 phy460: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  929.873078] ieee80211 phy460: rt2x00_set_rf: Info - RF chipset 0005 detected
[  929.873545] ieee80211 phy460: Selected rate control algorithm 'minstrel_ht'
[  929.919425] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  929.919489] ieee80211 phy460: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  929.919514] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  929.919518] ieee80211 phy460: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  930.135675] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  930.416372] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  930.467054] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  930.512427] usb 2-1: USB disconnect, device number 92
[  931.470808] usb 2-1: new high-speed USB device number 93 using xhci_hcd
[  931.635810] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  931.635817] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  931.635822] usb 2-1: Product: 802.11 n WLAN
[  931.635826] usb 2-1: Manufacturer: Ralink
[  931.635829] usb 2-1: SerialNumber: 1.0
[  931.767069] usb 2-1: reset high-speed USB device number 93 using xhci_hcd
[  931.926953] ieee80211 phy461: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  931.937291] ieee80211 phy461: rt2x00_set_rf: Info - RF chipset 0005 detected
[  931.937598] ieee80211 phy461: Selected rate control algorithm 'minstrel_ht'
[  931.971752] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  931.971817] ieee80211 phy461: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  931.971852] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  931.971856] ieee80211 phy461: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  932.184561] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  932.400992] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  932.471799] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  932.520301] usb 2-1: USB disconnect, device number 93
[  933.495000] usb 2-1: new high-speed USB device number 94 using xhci_hcd
[  933.660124] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  933.660131] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  933.660135] usb 2-1: Product: 802.11 n WLAN
[  933.660139] usb 2-1: Manufacturer: Ralink
[  933.660142] usb 2-1: SerialNumber: 1.0
[  933.791293] usb 2-1: reset high-speed USB device number 94 using xhci_hcd
[  933.950879] ieee80211 phy462: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  933.961097] ieee80211 phy462: rt2x00_set_rf: Info - RF chipset 0005 detected
[  933.961437] ieee80211 phy462: Selected rate control algorithm 'minstrel_ht'
[  933.996494] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  933.996560] ieee80211 phy462: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  933.996605] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  933.996610] ieee80211 phy462: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  934.213418] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  934.428926] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  934.476513] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  934.522053] usb 2-1: USB disconnect, device number 94
[  934.943150] usb 2-1: new high-speed USB device number 95 using xhci_hcd
[  935.108323] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  935.108330] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  935.108334] usb 2-1: Product: 802.11 n WLAN
[  935.108338] usb 2-1: Manufacturer: Ralink
[  935.108341] usb 2-1: SerialNumber: 1.0
[  935.243352] usb 2-1: reset high-speed USB device number 95 using xhci_hcd
[  935.403035] ieee80211 phy463: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  935.413391] ieee80211 phy463: rt2x00_set_rf: Info - RF chipset 0005 detected
[  935.413804] ieee80211 phy463: Selected rate control algorithm 'minstrel_ht'
[  935.457841] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  935.457908] ieee80211 phy463: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  935.457964] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  935.457968] ieee80211 phy463: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  935.686907] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  935.909201] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  935.974171] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  936.019772] usb 2-1: USB disconnect, device number 95
[  937.007341] usb 2-1: new high-speed USB device number 96 using xhci_hcd
[  937.172461] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  937.172471] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  937.172477] usb 2-1: Product: 802.11 n WLAN
[  937.172482] usb 2-1: Manufacturer: Ralink
[  937.172487] usb 2-1: SerialNumber: 1.0
[  937.303611] usb 2-1: reset high-speed USB device number 96 using xhci_hcd
[  937.463211] ieee80211 phy464: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  937.473204] ieee80211 phy464: rt2x00_set_rf: Info - RF chipset 0005 detected
[  937.473570] ieee80211 phy464: Selected rate control algorithm 'minstrel_ht'
[  937.512265] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  937.512324] ieee80211 phy464: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  937.512351] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  937.512355] ieee80211 phy464: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  937.725031] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  938.001931] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  938.065288] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  938.111927] usb 2-1: USB disconnect, device number 96
[  939.083538] usb 2-1: new high-speed USB device number 97 using xhci_hcd
[  939.252557] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  939.252564] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  939.252568] usb 2-1: Product: 802.11 n WLAN
[  939.252571] usb 2-1: Manufacturer: Ralink
[  939.252575] usb 2-1: SerialNumber: 1.0
[  939.383829] usb 2-1: reset high-speed USB device number 97 using xhci_hcd
[  939.543495] ieee80211 phy465: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  939.553691] ieee80211 phy465: rt2x00_set_rf: Info - RF chipset 0005 detected
[  939.554096] ieee80211 phy465: Selected rate control algorithm 'minstrel_ht'
[  939.600428] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  939.600488] ieee80211 phy465: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  939.600513] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  939.600517] ieee80211 phy465: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  939.808830] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  940.029064] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  940.101196] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  940.147929] usb 2-1: USB disconnect, device number 97
[  941.111744] usb 2-1: new high-speed USB device number 98 using xhci_hcd
[  941.280781] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  941.280787] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  941.280791] usb 2-1: Product: 802.11 n WLAN
[  941.280795] usb 2-1: Manufacturer: Ralink
[  941.280798] usb 2-1: SerialNumber: 1.0
[  941.412209] usb 2-1: reset high-speed USB device number 98 using xhci_hcd
[  941.572793] ieee80211 phy466: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  941.582952] ieee80211 phy466: rt2x00_set_rf: Info - RF chipset 0005 detected
[  941.584035] ieee80211 phy466: Selected rate control algorithm 'minstrel_ht'
[  941.616569] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  941.616634] ieee80211 phy466: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  941.616680] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  941.616684] ieee80211 phy466: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  941.838354] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  942.058383] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  942.111929] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  942.156306] usb 2-1: USB disconnect, device number 98
[  943.123945] usb 2-1: new high-speed USB device number 99 using xhci_hcd
[  943.293059] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  943.293065] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  943.293069] usb 2-1: Product: 802.11 n WLAN
[  943.293073] usb 2-1: Manufacturer: Ralink
[  943.293077] usb 2-1: SerialNumber: 1.0
[  943.424233] usb 2-1: reset high-speed USB device number 99 using xhci_hcd
[  943.583945] ieee80211 phy467: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  943.594252] ieee80211 phy467: rt2x00_set_rf: Info - RF chipset 0005 detected
[  943.594577] ieee80211 phy467: Selected rate control algorithm 'minstrel_ht'
[  943.628290] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  943.628353] ieee80211 phy467: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  943.628384] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  943.628387] ieee80211 phy467: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  943.834747] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  944.106428] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  944.170307] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  944.216436] usb 2-1: USB disconnect, device number 99
[  945.184139] usb 2-1: new high-speed USB device number 100 using xhci_hcd
[  945.353302] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  945.353308] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  945.353311] usb 2-1: Product: 802.11 n WLAN
[  945.353314] usb 2-1: Manufacturer: Ralink
[  945.353317] usb 2-1: SerialNumber: 1.0
[  945.484372] usb 2-1: reset high-speed USB device number 100 using xhci_hcd
[  945.644615] ieee80211 phy468: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  945.654972] ieee80211 phy468: rt2x00_set_rf: Info - RF chipset 0005 detected
[  945.655401] ieee80211 phy468: Selected rate control algorithm 'minstrel_ht'
[  945.686112] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  945.686177] ieee80211 phy468: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  945.686229] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  945.686233] ieee80211 phy468: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  945.909691] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  946.145847] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  946.226101] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  946.268955] usb 2-1: USB disconnect, device number 100
[  947.244354] usb 2-1: new high-speed USB device number 101 using xhci_hcd
[  947.409446] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  947.409451] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  947.409454] usb 2-1: Product: 802.11 n WLAN
[  947.409457] usb 2-1: Manufacturer: Ralink
[  947.409459] usb 2-1: SerialNumber: 1.0
[  947.544574] usb 2-1: reset high-speed USB device number 101 using xhci_hcd
[  947.704169] ieee80211 phy469: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  947.714146] ieee80211 phy469: rt2x00_set_rf: Info - RF chipset 0005 detected
[  947.714529] ieee80211 phy469: Selected rate control algorithm 'minstrel_ht'
[  947.748899] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  947.748961] ieee80211 phy469: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  947.748985] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  947.748989] ieee80211 phy469: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  947.977936] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  948.193346] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  948.257671] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  948.300935] usb 2-1: USB disconnect, device number 101
[  949.272569] usb 2-1: new high-speed USB device number 102 using xhci_hcd
[  949.438422] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  949.438430] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  949.438434] usb 2-1: Product: 802.11 n WLAN
[  949.438438] usb 2-1: Manufacturer: Ralink
[  949.438441] usb 2-1: SerialNumber: 1.0
[  949.572854] usb 2-1: reset high-speed USB device number 102 using xhci_hcd
[  949.736601] ieee80211 phy470: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  949.746950] ieee80211 phy470: rt2x00_set_rf: Info - RF chipset 0005 detected
[  949.747227] ieee80211 phy470: Selected rate control algorithm 'minstrel_ht'
[  949.792725] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  949.792787] ieee80211 phy470: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  949.792833] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  949.792837] ieee80211 phy470: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  950.001856] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  950.226292] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  950.281494] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  950.327561] usb 2-1: USB disconnect, device number 102
[  950.744724] usb 2-1: new high-speed USB device number 103 using xhci_hcd
[  950.910502] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  950.910509] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  950.910513] usb 2-1: Product: 802.11 n WLAN
[  950.910517] usb 2-1: Manufacturer: Ralink
[  950.910521] usb 2-1: SerialNumber: 1.0
[  951.041113] usb 2-1: reset high-speed USB device number 103 using xhci_hcd
[  951.205640] ieee80211 phy471: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  951.215837] ieee80211 phy471: rt2x00_set_rf: Info - RF chipset 0005 detected
[  951.216268] ieee80211 phy471: Selected rate control algorithm 'minstrel_ht'
[  951.251341] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  951.251408] ieee80211 phy471: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  951.251446] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  951.251451] ieee80211 phy471: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  951.468779] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  951.752722] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  951.810541] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  951.853317] usb 2-1: USB disconnect, device number 103
[  952.804925] usb 2-1: new high-speed USB device number 104 using xhci_hcd
[  952.974151] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  952.974156] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  952.974158] usb 2-1: Product: 802.11 n WLAN
[  952.974161] usb 2-1: Manufacturer: Ralink
[  952.974163] usb 2-1: SerialNumber: 1.0
[  953.109200] usb 2-1: reset high-speed USB device number 104 using xhci_hcd
[  953.269142] ieee80211 phy472: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  953.279318] ieee80211 phy472: rt2x00_set_rf: Info - RF chipset 0005 detected
[  953.279673] ieee80211 phy472: Selected rate control algorithm 'minstrel_ht'
[  953.317404] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  953.317470] ieee80211 phy472: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  953.317518] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  953.317522] ieee80211 phy472: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  953.531006] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  953.743033] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  953.797979] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  953.841441] usb 2-1: USB disconnect, device number 104
[  954.801128] usb 2-1: new high-speed USB device number 105 using xhci_hcd
[  954.970231] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  954.970237] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  954.970240] usb 2-1: Product: 802.11 n WLAN
[  954.970243] usb 2-1: Manufacturer: Ralink
[  954.970246] usb 2-1: SerialNumber: 1.0
[  955.105342] usb 2-1: reset high-speed USB device number 105 using xhci_hcd
[  955.265135] ieee80211 phy473: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  955.275690] ieee80211 phy473: rt2x00_set_rf: Info - RF chipset 0005 detected
[  955.275972] ieee80211 phy473: Selected rate control algorithm 'minstrel_ht'
[  955.311477] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  955.311542] ieee80211 phy473: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  955.311590] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  955.311595] ieee80211 phy473: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  955.531239] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  955.814272] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  955.881165] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  955.933572] usb 2-1: USB disconnect, device number 105
[  956.897332] usb 2-1: new high-speed USB device number 106 using xhci_hcd
[  957.062406] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  957.062413] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  957.062417] usb 2-1: Product: 802.11 n WLAN
[  957.062420] usb 2-1: Manufacturer: Ralink
[  957.062424] usb 2-1: SerialNumber: 1.0
[  957.193664] usb 2-1: reset high-speed USB device number 106 using xhci_hcd
[  957.357555] ieee80211 phy474: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  957.367923] ieee80211 phy474: rt2x00_set_rf: Info - RF chipset 0005 detected
[  957.368282] ieee80211 phy474: Selected rate control algorithm 'minstrel_ht'
[  957.398320] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  957.398383] ieee80211 phy474: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  957.398431] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  957.398434] ieee80211 phy474: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  957.610988] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  957.827929] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  957.886385] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  957.929945] usb 2-1: USB disconnect, device number 106
[  958.913539] usb 2-1: new high-speed USB device number 107 using xhci_hcd
[  959.078612] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  959.078619] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  959.078623] usb 2-1: Product: 802.11 n WLAN
[  959.078627] usb 2-1: Manufacturer: Ralink
[  959.078631] usb 2-1: SerialNumber: 1.0
[  959.209818] usb 2-1: reset high-speed USB device number 107 using xhci_hcd
[  959.373454] ieee80211 phy475: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  959.383867] ieee80211 phy475: rt2x00_set_rf: Info - RF chipset 0005 detected
[  959.384266] ieee80211 phy475: Selected rate control algorithm 'minstrel_ht'
[  959.427819] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  959.427886] ieee80211 phy475: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  959.427912] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  959.427916] ieee80211 phy475: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  959.643857] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  959.927928] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  959.987695] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  960.030104] usb 2-1: USB disconnect, device number 107
[  961.009837] usb 2-1: new high-speed USB device number 108 using xhci_hcd
[  961.175596] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  961.175603] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  961.175607] usb 2-1: Product: 802.11 n WLAN
[  961.175611] usb 2-1: Manufacturer: Ralink
[  961.175614] usb 2-1: SerialNumber: 1.0
[  961.306027] usb 2-1: reset high-speed USB device number 108 using xhci_hcd
[  961.465683] ieee80211 phy476: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  961.476132] ieee80211 phy476: rt2x00_set_rf: Info - RF chipset 0005 detected
[  961.476494] ieee80211 phy476: Selected rate control algorithm 'minstrel_ht'
[  961.509325] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  961.509387] ieee80211 phy476: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  961.509432] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  961.509436] ieee80211 phy476: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  961.722230] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  961.944177] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  962.014492] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  962.058439] usb 2-1: USB disconnect, device number 108
[  963.033987] usb 2-1: new high-speed USB device number 109 using xhci_hcd
[  963.198983] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  963.198990] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  963.198994] usb 2-1: Product: 802.11 n WLAN
[  963.198998] usb 2-1: Manufacturer: Ralink
[  963.199001] usb 2-1: SerialNumber: 1.0
[  963.330296] usb 2-1: reset high-speed USB device number 109 using xhci_hcd
[  963.494247] ieee80211 phy477: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  963.504696] ieee80211 phy477: rt2x00_set_rf: Info - RF chipset 0005 detected
[  963.505028] ieee80211 phy477: Selected rate control algorithm 'minstrel_ht'
[  963.538052] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  963.544271] ieee80211 phy477: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  963.544314] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  963.544319] ieee80211 phy477: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  963.756327] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  964.034379] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  964.093290] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  964.142578] usb 2-1: USB disconnect, device number 109
[  965.142173] usb 2-1: new high-speed USB device number 110 using xhci_hcd
[  965.307227] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  965.307233] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  965.307238] usb 2-1: Product: 802.11 n WLAN
[  965.307241] usb 2-1: Manufacturer: Ralink
[  965.307245] usb 2-1: SerialNumber: 1.0
[  965.438392] usb 2-1: reset high-speed USB device number 110 using xhci_hcd
[  965.602613] ieee80211 phy478: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  965.613031] ieee80211 phy478: rt2x00_set_rf: Info - RF chipset 0005 detected
[  965.613406] ieee80211 phy478: Selected rate control algorithm 'minstrel_ht'
[  965.653281] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  965.653350] ieee80211 phy478: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  965.653396] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  965.653400] ieee80211 phy478: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  965.864793] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  966.091827] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  966.150880] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  966.194703] usb 2-1: USB disconnect, device number 110
[  967.154392] usb 2-1: new high-speed USB device number 111 using xhci_hcd
[  967.319399] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  967.319406] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  967.319410] usb 2-1: Product: 802.11 n WLAN
[  967.319413] usb 2-1: Manufacturer: Ralink
[  967.319417] usb 2-1: SerialNumber: 1.0
[  967.450832] usb 2-1: reset high-speed USB device number 111 using xhci_hcd
[  967.610515] ieee80211 phy479: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  967.620741] ieee80211 phy479: rt2x00_set_rf: Info - RF chipset 0005 detected
[  967.621092] ieee80211 phy479: Selected rate control algorithm 'minstrel_ht'
[  967.654003] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  967.654067] ieee80211 phy479: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  967.654092] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  967.654095] ieee80211 phy479: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  967.876430] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  968.104976] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  968.163397] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  968.211331] usb 2-1: USB disconnect, device number 111
[  969.190595] usb 2-1: new high-speed USB device number 112 using xhci_hcd
[  969.355617] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  969.355623] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  969.355626] usb 2-1: Product: 802.11 n WLAN
[  969.355629] usb 2-1: Manufacturer: Ralink
[  969.355632] usb 2-1: SerialNumber: 1.0
[  969.487046] usb 2-1: reset high-speed USB device number 112 using xhci_hcd
[  969.646543] ieee80211 phy480: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  969.656790] ieee80211 phy480: rt2x00_set_rf: Info - RF chipset 0005 detected
[  969.657158] ieee80211 phy480: Selected rate control algorithm 'minstrel_ht'
[  969.698530] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  969.698590] ieee80211 phy480: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  969.698658] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  969.698663] ieee80211 phy480: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  969.920872] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  970.135762] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  970.191517] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  970.234946] usb 2-1: USB disconnect, device number 112
[  971.230819] usb 2-1: new high-speed USB device number 113 using xhci_hcd
[  971.395918] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  971.395924] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  971.395928] usb 2-1: Product: 802.11 n WLAN
[  971.395932] usb 2-1: Manufacturer: Ralink
[  971.395935] usb 2-1: SerialNumber: 1.0
[  971.527139] usb 2-1: reset high-speed USB device number 113 using xhci_hcd
[  971.690836] ieee80211 phy481: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  971.700739] ieee80211 phy481: rt2x00_set_rf: Info - RF chipset 0005 detected
[  971.701006] ieee80211 phy481: Selected rate control algorithm 'minstrel_ht'
[  971.727582] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  971.727645] ieee80211 phy481: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  971.727677] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  971.727680] ieee80211 phy481: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  971.941252] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  972.221192] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  972.286823] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  972.331324] usb 2-1: USB disconnect, device number 113
[  973.311133] usb 2-1: new high-speed USB device number 114 using xhci_hcd
[  973.476518] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  973.476525] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  973.476529] usb 2-1: Product: 802.11 n WLAN
[  973.476532] usb 2-1: Manufacturer: Ralink
[  973.476536] usb 2-1: SerialNumber: 1.0
[  973.611278] usb 2-1: reset high-speed USB device number 114 using xhci_hcd
[  973.770999] ieee80211 phy482: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  973.781098] ieee80211 phy482: rt2x00_set_rf: Info - RF chipset 0005 detected
[  973.781446] ieee80211 phy482: Selected rate control algorithm 'minstrel_ht'
[  973.822880] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  973.823363] ieee80211 phy482: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  973.823403] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  973.823407] ieee80211 phy482: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  974.047485] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  974.267113] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  974.329050] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  974.375577] usb 2-1: USB disconnect, device number 114
[  975.323244] usb 2-1: new high-speed USB device number 115 using xhci_hcd
[  975.488406] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  975.488415] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  975.488421] usb 2-1: Product: 802.11 n WLAN
[  975.488426] usb 2-1: Manufacturer: Ralink
[  975.488430] usb 2-1: SerialNumber: 1.0
[  975.623442] usb 2-1: reset high-speed USB device number 115 using xhci_hcd
[  975.791124] ieee80211 phy483: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  975.801412] ieee80211 phy483: rt2x00_set_rf: Info - RF chipset 0005 detected
[  975.801813] ieee80211 phy483: Selected rate control algorithm 'minstrel_ht'
[  975.838113] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  975.838178] ieee80211 phy483: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  975.838204] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  975.838208] ieee80211 phy483: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  976.053654] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  976.267207] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  976.333405] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  976.375708] usb 2-1: USB disconnect, device number 115
[  977.343458] usb 2-1: new high-speed USB device number 116 using xhci_hcd
[  977.516531] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  977.516536] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  977.516540] usb 2-1: Product: 802.11 n WLAN
[  977.516543] usb 2-1: Manufacturer: Ralink
[  977.516546] usb 2-1: SerialNumber: 1.0
[  977.647719] usb 2-1: reset high-speed USB device number 116 using xhci_hcd
[  977.808655] ieee80211 phy484: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  977.819137] ieee80211 phy484: rt2x00_set_rf: Info - RF chipset 0005 detected
[  977.819516] ieee80211 phy484: Selected rate control algorithm 'minstrel_ht'
[  977.852377] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  977.852440] ieee80211 phy484: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  977.852484] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  977.852488] ieee80211 phy484: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  978.078143] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  978.310123] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  978.368461] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  978.412012] usb 2-1: USB disconnect, device number 116
[  979.371649] usb 2-1: new high-speed USB device number 117 using xhci_hcd
[  979.543090] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  979.543095] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  979.543097] usb 2-1: Product: 802.11 n WLAN
[  979.543099] usb 2-1: Manufacturer: Ralink
[  979.543102] usb 2-1: SerialNumber: 1.0
[  979.676078] usb 2-1: reset high-speed USB device number 117 using xhci_hcd
[  979.839666] ieee80211 phy485: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  979.851919] ieee80211 phy485: rt2x00_set_rf: Info - RF chipset 0005 detected
[  979.852219] ieee80211 phy485: Selected rate control algorithm 'minstrel_ht'
[  979.892508] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  979.892573] ieee80211 phy485: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  979.892626] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  979.892631] ieee80211 phy485: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  980.101898] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  980.333404] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  980.388463] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  980.433098] usb 2-1: USB disconnect, device number 117
[  981.391857] usb 2-1: new high-speed USB device number 118 using xhci_hcd
[  981.560839] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  981.560841] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  981.560843] usb 2-1: Product: 802.11 n WLAN
[  981.560844] usb 2-1: Manufacturer: Ralink
[  981.560845] usb 2-1: SerialNumber: 1.0
[  981.692075] usb 2-1: reset high-speed USB device number 118 using xhci_hcd
[  981.851527] ieee80211 phy486: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  981.861203] ieee80211 phy486: rt2x00_set_rf: Info - RF chipset 0005 detected
[  981.861460] ieee80211 phy486: Selected rate control algorithm 'minstrel_ht'
[  981.903213] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  981.903276] ieee80211 phy486: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  981.903302] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  981.903305] ieee80211 phy486: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  982.120222] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  982.399802] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  982.454412] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  982.500345] usb 2-1: USB disconnect, device number 118
[  983.480066] usb 2-1: new high-speed USB device number 119 using xhci_hcd
[  983.645169] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  983.645179] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  983.645185] usb 2-1: Product: 802.11 n WLAN
[  983.645190] usb 2-1: Manufacturer: Ralink
[  983.645195] usb 2-1: SerialNumber: 1.0
[  983.780360] usb 2-1: reset high-speed USB device number 119 using xhci_hcd
[  983.944027] ieee80211 phy487: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  983.954927] ieee80211 phy487: rt2x00_set_rf: Info - RF chipset 0005 detected
[  983.955307] ieee80211 phy487: Selected rate control algorithm 'minstrel_ht'
[  983.988756] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  983.995180] ieee80211 phy487: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  983.995222] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  983.995226] ieee80211 phy487: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  984.216600] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  984.500674] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  984.568831] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  984.612709] usb 2-1: USB disconnect, device number 119
[  985.576392] usb 2-1: new high-speed USB device number 120 using xhci_hcd
[  985.742151] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  985.742159] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  985.742164] usb 2-1: Product: 802.11 n WLAN
[  985.742168] usb 2-1: Manufacturer: Ralink
[  985.742171] usb 2-1: SerialNumber: 1.0
[  985.872694] usb 2-1: reset high-speed USB device number 120 using xhci_hcd
[  986.033619] ieee80211 phy488: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  986.044034] ieee80211 phy488: rt2x00_set_rf: Info - RF chipset 0005 detected
[  986.044416] ieee80211 phy488: Selected rate control algorithm 'minstrel_ht'
[  986.079452] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  986.079519] ieee80211 phy488: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  986.079566] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  986.079571] ieee80211 phy488: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  986.288854] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  986.514325] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  986.564969] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  986.608708] usb 2-1: USB disconnect, device number 120
[  987.576512] usb 2-1: new high-speed USB device number 121 using xhci_hcd
[  987.745639] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  987.745646] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  987.745650] usb 2-1: Product: 802.11 n WLAN
[  987.745653] usb 2-1: Manufacturer: Ralink
[  987.745657] usb 2-1: SerialNumber: 1.0
[  987.880749] usb 2-1: reset high-speed USB device number 121 using xhci_hcd
[  988.041502] ieee80211 phy489: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  988.051859] ieee80211 phy489: rt2x00_set_rf: Info - RF chipset 0005 detected
[  988.052185] ieee80211 phy489: Selected rate control algorithm 'minstrel_ht'
[  988.088419] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  988.088477] ieee80211 phy489: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  988.088520] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  988.088524] ieee80211 phy489: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  988.299400] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  988.518824] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  988.573683] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  988.620833] usb 2-1: USB disconnect, device number 121
[  989.600732] usb 2-1: new high-speed USB device number 122 using xhci_hcd
[  989.765773] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  989.765780] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  989.765785] usb 2-1: Product: 802.11 n WLAN
[  989.765788] usb 2-1: Manufacturer: Ralink
[  989.765792] usb 2-1: SerialNumber: 1.0
[  989.896986] usb 2-1: reset high-speed USB device number 122 using xhci_hcd
[  990.056724] ieee80211 phy490: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  990.066924] ieee80211 phy490: rt2x00_set_rf: Info - RF chipset 0005 detected
[  990.067781] ieee80211 phy490: Selected rate control algorithm 'minstrel_ht'
[  990.101079] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  990.101136] ieee80211 phy490: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  990.101182] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  990.101186] ieee80211 phy490: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  990.307271] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  990.583208] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  990.638222] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  990.685082] usb 2-1: USB disconnect, device number 122
[  991.648962] usb 2-1: new high-speed USB device number 123 using xhci_hcd
[  991.818653] usb 2-1: New USB device found, idVendor=148f, idProduct=3070, bcdDevice= 1.01
[  991.818660] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  991.818665] usb 2-1: Product: 802.11 n WLAN
[  991.818668] usb 2-1: Manufacturer: Ralink
[  991.818672] usb 2-1: SerialNumber: 1.0
[  991.953235] usb 2-1: reset high-speed USB device number 123 using xhci_hcd
[  992.120857] ieee80211 phy491: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[  992.131693] ieee80211 phy491: rt2x00_set_rf: Info - RF chipset 0005 detected
[  992.132042] ieee80211 phy491: Selected rate control algorithm 'minstrel_ht'
[  992.163251] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  992.163324] ieee80211 phy491: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  992.163373] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[  992.163378] ieee80211 phy491: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  992.381594] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  992.618834] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  992.678190] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[  992.721349] usb 2-1: USB disconnect, device number 123


root@kali:~# dmesg | tail
[ 1076.555797] usb 2-1: Manufacturer: Ralink
[ 1076.555799] usb 2-1: SerialNumber: 1.0
[ 1076.686691] usb 2-1: reset high-speed USB device number 42 using xhci_hcd
[ 1076.847072] ieee80211 phy534: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[ 1076.857236] ieee80211 phy534: rt2x00_set_rf: Info - RF chipset 0005 detected
[ 1076.857570] ieee80211 phy534: Selected rate control algorithm 'minstrel_ht'
[ 1076.898098] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 1076.898163] ieee80211 phy534: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 1076.898212] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[ 1076.898217] ieee80211 phy534: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36


Eğer konuda hata varsa üzgünüm henüz yeniyim sitede ve Linuxu yeni yeni öğreniyorum,forumda "Konu Açarken Aktarılması Gerekenler" adlı konu gördüm oradaki tüm kodları paylaştım.

unixmania

sonucta esas noktayi dememissin. baglanabiliyonmu?, hemen kopuyomu?

aglari_goster.sh


#!/usr/bin/sh

wpa_supplicant -C/run/wpa_supplicant -iwlan0 -B;
wpa_cli scan;
sleep 3;
wpa_cli scan_results;


baglan.sh


#!/usr/bin/sh

wpa_supplicant -cwpa.conf -iwlan0 -B;
sleep 2;
ip link set wlan0 up;
ip addr add 192.168.1.79/24 dev wlan0
ip route add default via 192.168.1.1



wpa.conf


ctrl_interface=DIR=/run/wpa_supplicant GROUP=wheel
eapol_version=1
ap_scan=1
fast_reauth=1


network={
ssid="agin_adi"
scan_ssid=1
proto=WPA RSN
key_mgmt=WPA-PSK
pairwise=CCMP TKIP
group=CCMP TKIP WEP104 WEP40
psk="gizlisifre"
}


Yukarda sadece sifre ve agin adini degistirsen yeter. Bide daha yukardaki komutlarda wlan0 yazan yerleri, statik ip adreslerini ve modemin ipsini  (192.168.1.1) kendi sistemine gore degistirmen gerekebilir.

berke4646

Cevabın için teşekkürler bilgisayarın kendi WiFi aygıtında problem yok USB girişinden taktığım cihazda sıkıntı var bağlanmayı geçin ağları bile göremiyorum.

Atheros bilgisayarın kendi WiFi aygıtı o problemsiz.

unixmania

#3
aglari_goster diye komut vermisim; deneyip denemedigini soylemedin. Biri forumda sana cevap verirken komutta ilistirmisse onu deneyip sonucunu(varsa komutun ciktisini) soylemen icindir. Dahili-harici farketmez. harici olan wlan1 se oralari wlan1 yapcan o kadar.  /sys/class/net/wlan1  sabit duruyo dimi? o da bi kaybolup bi geliyomu?


IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready


deyip duruyor.


ip link set wlan1 up;
  yapip sonra aglari tarat bakam.

NOT: komutlarimin duzgun yurumesi icin senden ROOT hakki ister/isteyebilir.

berke4646

Geç cevap verdim kusura bakmayın böyle bir hata alıyorum.



root@kali:~# ip link set wlan1 up;
Cannot find device "wlan1"


root@kali:~# airmon-ng

PHY Interface Driver Chipset

phy0 wlan0 ath9k Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter (rev 01)
phy5 wlan1 ?????? non-mac80211 device? (report this!)