Arch Kyk Wifi Sorunu

Başlatan cokomoko, 12 Ekim 2015 - 15:42:51

« önceki - sonraki »

0 Üyeler ve 1 Ziyaretçi konuyu incelemekte.

cokomoko

Sorun şöyle ki windows ve diğer linux'lar dahil tüm sistemlerde kyk doğrulama ekranı geliyor ama Arch'ta gelmiyor, öyle olunca da login olamıyorum, bazen de kyk doğrulama ekranı geliyor ama bu kez de yarım saat aralıklarla kopup duruyor, üstelik ben ağdan paket çekerken kopuyor.Ama diğer sistemlerde bu iki sorun da yok, neden böyle oluyor anlamıyorum, çünkü aynı sistemle komşumu wifi'sine şifreli olsun olmasın girebiliyordum, bağlantı kopunca kendisi otomatik bağlanıyordu, Kyk wifi'de öyle değil yarım saat sonra kopuyor, bağlantıyı kesip tekrar bağlanıyorum, bu böyle yarım saat aralıklarla devam ediyor, bazen ise bağlantıyı kesip tekrar bağlanmam da işe yaramıyor,hiç bağlanmayabiliyor.
Birkaç gündür çeşitli ağ yöneticileri denedim hepsinde aynı sorunu yaşıyorum ve hala sorunu çözemedim.
''Eğer 386BSD ben Linux'a başladığımda var olsaydı, Linux büyük bir olasılıkla olmazdı."
........................Linus Torvalds..........................
İnsanın aradığı sadece huzur ve mutluluktur, 1 numara olmak yalnız kalmak demektir ve 1 numara kalmak için birçok şeyi feda etmek zorunda kalırsın...

heartsmagic

Kopma yaşandığı anda dmseg çıktısına bir bakmak lazım. Eudroam ve böyle bağlantı sağlanan yerlerde bir ara biz de sorun yaşadık. Şu an ne durumda bilemiyorum açıkçası. KYK meselesini doğru anlamışımdır umarım?
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?


Böylece yalan, dünyanın düzenine dönüştürülüyor.

cokomoko

#2
Buyrun dmesg çıktısı
[    0.101595] pci 0000:0e:00.0: reg 0x20: [mem 0xf2000000-0xf2003fff 64bit pref]
[    0.101640] pci 0000:0e:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.101786] pci 0000:0e:00.0: supports D1 D2
[    0.101787] pci 0000:0e:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.102022] pci 0000:0e:00.0: System wakeup disabled by ACPI
[    0.102160] pci 0000:00:1c.2: PCI bridge to [bus 0e]
[    0.102165] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    0.102174] pci 0000:00:1c.2:   bridge window [mem 0xf2000000-0xf20fffff 64bit pref]
[    0.102174] pci 0000:14:00.0: [168c:002b] type 00 class 0x028000
[    0.102174] pci 0000:14:00.0: reg 0x10: [mem 0xf6000000-0xf600ffff 64bit]
[    0.102203] pci 0000:14:00.0: supports D1
[    0.102205] pci 0000:14:00.0: PME# supported from D0 D1 D3hot
[    0.102236] pci 0000:14:00.0: System wakeup disabled by ACPI
[    0.104022] pci 0000:00:1c.3: PCI bridge to [bus 14]
[    0.104030] pci 0000:00:1c.3:   bridge window [mem 0xf6000000-0xf60fffff]
[    0.104117] pci 0000:20:00.0: [197b:2382] type 00 class 0x088000
[    0.104171] pci 0000:20:00.0: reg 0x10: [mem 0xf6100000-0xf61000ff]
[    0.104327] pci 0000:20:00.0: System wakeup disabled by ACPI
[    0.104386] pci 0000:20:00.2: [197b:2381] type 00 class 0x080501
[    0.104440] pci 0000:20:00.2: reg 0x10: [mem 0xf6100400-0xf61004ff]
[    0.104638] pci 0000:20:00.3: [197b:2383] type 00 class 0x088000
[    0.104692] pci 0000:20:00.3: reg 0x10: [mem 0xf6100800-0xf61008ff]
[    0.104887] pci 0000:20:00.4: [197b:2384] type 00 class 0x088000
[    0.104941] pci 0000:20:00.4: reg 0x10: [mem 0xf6100c00-0xf6100cff]
[    0.107024] pci 0000:00:1c.5: PCI bridge to [bus 20]
[    0.107032] pci 0000:00:1c.5:   bridge window [mem 0xf6100000-0xf61fffff]
[    0.107141] pci 0000:00:1e.0: PCI bridge to [bus 26] (subtractive decode)
[    0.107154] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.107155] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.107157] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.107159] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.107160] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.107162] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[    0.107164] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xdfffffff window] (subtractive decode)
[    0.107165] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)
[    0.129249] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.129297] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.129342] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[    0.129388] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.129435] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.129484] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[    0.129529] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.129574] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.129709] ACPI: Enabled 7 GPEs in block 00 to 3F
[    0.129851] ACPI : EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[    0.129937] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.129937] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.129937] vgaarb: loaded
[    0.129937] vgaarb: bridge control possible 0000:01:00.0
[    0.130053] ACPI: bus type USB registered
[    0.130072] usbcore: registered new interface driver usbfs
[    0.130083] usbcore: registered new interface driver hub
[    0.130094] usbcore: registered new device driver usb
[    0.130159] PCI: Using ACPI for IRQ routing
[    0.139496] PCI: pci_cache_line_size set to 64 bytes
[    0.139584] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[    0.139586] e820: reserve RAM buffer [mem 0xbdaa1000-0xbfffffff]
[    0.139587] e820: reserve RAM buffer [mem 0xbdbbc000-0xbfffffff]
[    0.139589] e820: reserve RAM buffer [mem 0xbdd08000-0xbfffffff]
[    0.139590] e820: reserve RAM buffer [mem 0xbdf18000-0xbfffffff]
[    0.139592] e820: reserve RAM buffer [mem 0xbdf64000-0xbfffffff]
[    0.139593] e820: reserve RAM buffer [mem 0xbdfe0000-0xbfffffff]
[    0.139594] e820: reserve RAM buffer [mem 0xbe000000-0xbfffffff]
[    0.139718] NetLabel: Initializing
[    0.139719] NetLabel:  domain hash size = 128
[    0.139720] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.139733] NetLabel:  unlabeled traffic allowed by default
[    0.139761] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.139766] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.139770] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.142020] clocksource: Switched to clocksource hpet
[    0.145326] pnp: PnP ACPI init
[    0.166131] system 00:00: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.166135] system 00:00: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.166195] system 00:01: [io  0x0480-0x048f] has been reserved
[    0.166198] system 00:01: [io  0xffff] has been reserved
[    0.166199] system 00:01: [io  0xffff] has been reserved
[    0.166201] system 00:01: [io  0x0400-0x047f] could not be reserved
[    0.166203] system 00:01: [io  0x1180-0x11ff] has been reserved
[    0.166205] system 00:01: [io  0xfe00] has been reserved
[    0.166207] system 00:01: [io  0xff2c-0xff7f] has been reserved
[    0.166210] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.166239] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.166265] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.166294] pnp 00:04: Plug and Play ACPI device, IDs SYN0712 SYN0700 SYN0002 PNP0f13 (active)
[    0.166434] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.166436] system 00:05: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.166438] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.166440] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.166442] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.166444] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.166445] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.166448] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.166566] pnp: PnP ACPI: found 6 devices
[    0.173314] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.173346] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x001fffff] to [bus 0e] add_size 400000 add_align 100000
[    0.173356] pci 0000:00:1c.3: bridge window [io  0x1000-0x0fff] to [bus 14] add_size 1000
[    0.173359] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 14] add_size 200000 add_align 100000
[    0.173371] pci 0000:00:1c.5: bridge window [io  0x1000-0x0fff] to [bus 20] add_size 1000
[    0.173374] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 20] add_size 200000 add_align 100000
[    0.173387] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x001fffff] res_to_dev_res add_size 400000 min_align 100000
[    0.173389] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x005fffff] res_to_dev_res add_size 400000 min_align 100000
[    0.173391] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.173393] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.173395] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.173397] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.173399] pci 0000:00:1c.3: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.173401] pci 0000:00:1c.3: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.173403] pci 0000:00:1c.5: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.173405] pci 0000:00:1c.5: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.173411] pci 0000:00:1c.2: BAR 14: assigned [mem 0xc0000000-0xc04fffff]
[    0.173416] pci 0000:00:1c.3: BAR 15: assigned [mem 0xc0500000-0xc06fffff 64bit pref]
[    0.173421] pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0700000-0xc08fffff 64bit pref]
[    0.173423] pci 0000:00:1c.3: BAR 13: assigned [io  0x5000-0x5fff]
[    0.173426] pci 0000:00:1c.5: BAR 13: assigned [io  0x6000-0x6fff]
[    0.173430] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0900000-0xc09000ff 64bit]
[    0.173443] pci 0000:01:00.0: BAR 6: assigned [mem 0xf2180000-0xf21fffff pref]
[    0.173445] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.173448] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
[    0.173451] pci 0000:00:01.0:   bridge window [mem 0xf2100000-0xf3ffffff]
[    0.173453] pci 0000:00:01.0:   bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[    0.173457] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[    0.173460] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.173465] pci 0000:00:1c.0:   bridge window [mem 0xf4000000-0xf5ffffff]
[    0.173469] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.173477] pci 0000:0e:00.0: BAR 6: assigned [mem 0xc0000000-0xc001ffff pref]
[    0.173478] pci 0000:00:1c.2: PCI bridge to [bus 0e]
[    0.173481] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    0.173486] pci 0000:00:1c.2:   bridge window [mem 0xc0000000-0xc04fffff]
[    0.173490] pci 0000:00:1c.2:   bridge window [mem 0xf2000000-0xf20fffff 64bit pref]
[    0.173497] pci 0000:00:1c.3: PCI bridge to [bus 14]
[    0.173500] pci 0000:00:1c.3:   bridge window [io  0x5000-0x5fff]
[    0.173505] pci 0000:00:1c.3:   bridge window [mem 0xf6000000-0xf60fffff]
[    0.173509] pci 0000:00:1c.3:   bridge window [mem 0xc0500000-0xc06fffff 64bit pref]
[    0.173516] pci 0000:00:1c.5: PCI bridge to [bus 20]
[    0.173519] pci 0000:00:1c.5:   bridge window [io  0x6000-0x6fff]
[    0.173524] pci 0000:00:1c.5:   bridge window [mem 0xf6100000-0xf61fffff]
[    0.173528] pci 0000:00:1c.5:   bridge window [mem 0xc0700000-0xc08fffff 64bit pref]
[    0.173535] pci 0000:00:1e.0: PCI bridge to [bus 26]
[    0.173549] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.173550] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.173552] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.173554] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.173555] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.173557] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000e3fff window]
[    0.173559] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xdfffffff window]
[    0.173560] pci_bus 0000:00: resource 11 [mem 0xf0000000-0xfebfffff window]
[    0.173562] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.173564] pci_bus 0000:01: resource 1 [mem 0xf2100000-0xf3ffffff]
[    0.173566] pci_bus 0000:01: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
[    0.173567] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.173569] pci_bus 0000:02: resource 1 [mem 0xf4000000-0xf5ffffff]
[    0.173571] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.173572] pci_bus 0000:0e: resource 0 [io  0x4000-0x4fff]
[    0.173574] pci_bus 0000:0e: resource 1 [mem 0xc0000000-0xc04fffff]
[    0.173576] pci_bus 0000:0e: resource 2 [mem 0xf2000000-0xf20fffff 64bit pref]
[    0.173577] pci_bus 0000:14: resource 0 [io  0x5000-0x5fff]
[    0.173579] pci_bus 0000:14: resource 1 [mem 0xf6000000-0xf60fffff]
[    0.173580] pci_bus 0000:14: resource 2 [mem 0xc0500000-0xc06fffff 64bit pref]
[    0.173582] pci_bus 0000:20: resource 0 [io  0x6000-0x6fff]
[    0.173584] pci_bus 0000:20: resource 1 [mem 0xf6100000-0xf61fffff]
[    0.173585] pci_bus 0000:20: resource 2 [mem 0xc0700000-0xc08fffff 64bit pref]
[    0.173587] pci_bus 0000:26: resource 4 [io  0x0000-0x0cf7 window]
[    0.173589] pci_bus 0000:26: resource 5 [io  0x0d00-0xffff window]
[    0.173590] pci_bus 0000:26: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.173592] pci_bus 0000:26: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.173594] pci_bus 0000:26: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.173595] pci_bus 0000:26: resource 9 [mem 0x000e0000-0x000e3fff window]
[    0.173597] pci_bus 0000:26: resource 10 [mem 0xc0000000-0xdfffffff window]
[    0.173599] pci_bus 0000:26: resource 11 [mem 0xf0000000-0xfebfffff window]
[    0.173632] NET: Registered protocol family 2
[    0.173834] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.174099] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.174458] TCP: Hash tables configured (established 65536 bind 65536)
[    0.174515] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.174570] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.174666] NET: Registered protocol family 1
[    0.175587] pci 0000:01:00.0: Video device with shadowed ROM
[    0.175614] PCI: CLS 64 bytes, default 64
[    0.175682] Unpacking initramfs...
[    0.183834] Freeing initrd memory: 6376K (ffff88003737c000 - ffff8800379b6000)
[    0.183848] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.183850] software IO TLB [mem 0xb9aa1000-0xbdaa1000] (64MB) mapped at [ffff8800b9aa1000-ffff8800bdaa0fff]
[    0.184000] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa0b
[    0.184022] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa0b
[    0.184118] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.184265] simple-framebuffer simple-framebuffer.0: framebuffer at 0xcf000000, 0x300000 bytes, mapped to 0xffffc90001000000
[    0.184268] simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=1024x768x32, linelength=4096
[    0.186183] Console: switching to colour frame buffer device 128x48
[    0.187739] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[    0.187953] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.187976] Initialise system trusted keyring
[    0.188009] audit: initializing netlink subsys (disabled)
[    0.188031] audit: type=2000 audit(1444773708.187:1): initialized
[    0.188228] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.190186] zpool: loaded
[    0.190349] VFS: Disk quotas dquot_6.6.0
[    0.190390] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.190816] bounce: pool size: 64 pages
[    0.190826] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.190862] io scheduler noop registered
[    0.190864] io scheduler deadline registered
[    0.190903] io scheduler cfq registered
[    0.190937] io scheduler bfq registered (default)
[    0.190938] BFQ I/O-scheduler: v7r9
[    0.191721] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.191728] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.191813] intel_idle: does not run on family 6 model 23
[    0.191861] GHES: HEST is not enabled!
[    0.191867] xenfs: not registering filesystem on non-xen platform
[    0.191933] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.192384] Linux agpgart interface v0.103
[    0.192591] libphy: Fixed MDIO Bus: probed
[    0.192651] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.238965] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.239009] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.239116] mousedev: PS/2 mouse device common for all mice
[    0.239627] ledtrig-cpu: registered to indicate activity on CPUs
[    0.239646] hidraw: raw HID events driver (C) Jiri Kosina
[    0.239835] PCCT header not found.
[    0.239960] Key type dns_resolver registered
[    0.240242] Loading compiled-in X.509 certificates
[    0.240250] registered taskstats version 1
[    0.240257] zswap: loading zswap
[    0.241133] zpool: no driver for type zbud
[    0.241153] zswap: zbud zpool not available
[    0.241168] zswap: zpool creation failed
[    0.243654] Key type encrypted registered
[    0.243659] evm: HMAC attrs: 0x1
[    0.244622] Freeing unused kernel memory: 1040K (ffffffff818b2000 - ffffffff819b6000)
[    0.251467] SCSI subsystem initialized
[    0.257359] libata version 3.00 loaded.
[    0.257945] ahci 0000:00:1f.2: version 3.0
[    0.258171] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    0.258174] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part ccc sxs
[    0.258825] scsi host0: ahci
[    0.258939] scsi host1: ahci
[    0.259043] scsi host2: ahci
[    0.259143] scsi host3: ahci
[    0.259232] scsi host4: ahci
[    0.259324] scsi host5: ahci
[    0.259370] ata1: SATA max UDMA/133 abar m2048@0xf6404000 port 0xf6404100 irq 29
[    0.259373] ata2: SATA max UDMA/133 abar m2048@0xf6404000 port 0xf6404180 irq 29
[    0.259374] ata3: DUMMY
[    0.259375] ata4: DUMMY
[    0.259377] ata5: SATA max UDMA/133 abar m2048@0xf6404000 port 0xf6404300 irq 29
[    0.259379] ata6: SATA max UDMA/133 abar m2048@0xf6404000 port 0xf6404380 irq 29
[    0.292422] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.564049] ata6: SATA link down (SStatus 0 SControl 300)
[    0.564069] ata1: SATA link down (SStatus 0 SControl 300)
[    0.719022] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.719039] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.720932] ata5.00: READ LOG DMA EXT failed, trying unqueued
[    0.720960] ata5.00: failed to get NCQ Send/Recv Log Emask 0x1
[    0.720961] ata5.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0AB0Q, max UDMA/133
[    0.720963] ata5.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.721164] ata5.00: failed to get NCQ Send/Recv Log Emask 0x1
[    0.721167] ata5.00: configured for UDMA/133
[    0.744322] ata2.00: ATA-8: TOSHIBA MQ01ABD100, AX001A, max UDMA/100
[    0.744323] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.745955] ata2.00: configured for UDMA/100
[    0.746071] scsi 1:0:0:0: Direct-Access     ATA      TOSHIBA MQ01ABD1 1A   PQ: 0 ANSI: 5
[    0.746230] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    0.746232] sd 1:0:0:0: [sda] 4096-byte physical blocks
[    0.746280] sd 1:0:0:0: [sda] Write Protect is off
[    0.746282] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.746303] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.746330] scsi 4:0:0:0: Direct-Access     ATA      Samsung SSD 840  AB0Q PQ: 0 ANSI: 5
[    0.746492] sd 4:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    0.746584] sd 4:0:0:0: [sdb] Write Protect is off
[    0.746586] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    0.746617] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.747823]  sdb: sdb1 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 > sdb2
[    0.748370] sd 4:0:0:0: [sdb] Attached SCSI disk
[    0.872992]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 >
                sda3: <bsd:bad subpartition - ignored
                >
[    0.873702] sd 1:0:0:0: [sda] Attached SCSI disk
[    1.185023] tsc: Refined TSC clocksource calibration: 2526.999 MHz
[    1.185026] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x246cdab5d1d, max_idle_ns: 440795263955 ns
[    1.420808] random: nonblocking pool is initialized
[    1.933866] EXT4-fs (sdb9): mounted filesystem with ordered data mode. Opts: (null)
[    2.006742] NET: Registered protocol family 10
[    2.008940] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.010866] systemd[1]: systemd 227 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
[    2.010993] systemd[1]: Detected architecture x86-64.
[    2.011866] systemd[1]: Set hostname to <cokomoko>.
[    2.135363] systemd[1]: [/usr/lib/systemd/system/mpd.service:17] Unknown lvalue 'ControlGroup' in section 'Service'
[    2.135373] systemd[1]: [/usr/lib/systemd/system/mpd.service:20] Unknown lvalue 'ControlGroupAttribute' in section 'Service'
[    2.157209] systemd[1]: tlp.service: Cannot add dependency job, ignoring: Unit tlp.service failed to load: No such file or directory.
[    2.157290] systemd[1]: acpid.socket: Cannot add dependency job, ignoring: Unit acpid.socket failed to load: No such file or directory.
[    2.157336] systemd[1]: vboxservice.service: Cannot add dependency job, ignoring: Unit vboxservice.service failed to load: No such file or directory.
[    2.157377] systemd[1]: tlp.service: Cannot add dependency job, ignoring: Unit tlp.service failed to load: No such file or directory.
[    2.158073] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    2.158151] systemd[1]: Listening on udev Control Socket.
[    2.158166] systemd[1]: Reached target Encrypted Volumes.
[    2.158499] systemd[1]: Created slice User and Session Slice.
[    2.158584] systemd[1]: Listening on Journal Audit Socket.
[    2.158717] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    2.158750] systemd[1]: Listening on udev Kernel Socket.
[    2.158792] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    2.158825] systemd[1]: Listening on LVM2 metadata daemon socket.
[    2.158932] systemd[1]: Created slice System Slice.
[    2.158953] systemd[1]: Reached target Slices.
[    2.159077] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    2.159183] systemd[1]: Created slice system-getty.slice.
[    2.159223] systemd[1]: Listening on Journal Socket (/dev/log).
[    2.159242] systemd[1]: Reached target Login Prompts.
[    2.159278] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    2.159315] systemd[1]: Listening on Journal Socket.
[    2.159798] systemd[1]: Mounting POSIX Message Queue File System...
[    2.160489] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    2.161060] systemd[1]: Starting Journal Service...
[    2.162915] systemd[1]: Starting Set Up Additional Binary Formats...
[    2.163965] systemd[1]: Starting Setup Virtual Console...
[    2.164725] systemd[1]: Starting Remount Root and Kernel File Systems...
[    2.168635] systemd[1]: Starting Load Kernel Modules...
[    2.169326] systemd[1]: Mounting Huge Pages File System...
[    2.171680] systemd[1]: Mounting Debug File System...
[    2.174172] EXT4-fs (sdb9): re-mounted. Opts: discard
[    2.179053] systemd[1]: Mounted Huge Pages File System.
[    2.179117] systemd[1]: Mounted POSIX Message Queue File System.
[    2.179658] systemd[1]: Mounted Debug File System.
[    2.179856] vhba: module is from the staging directory, the quality is unknown, you have been warned.
[    2.180418] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    2.180706] systemd[1]: Started Remount Root and Kernel File Systems.
[    2.181234] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 114 (systemd-binfmt)
[    2.183072] scsi host6: vhba
[    2.185082] clocksource: Switched to clocksource tsc
[    2.188909] speakup: module is from the staging directory, the quality is unknown, you have been warned.
[    2.189391] input: Speakup as /devices/virtual/input/input2
[    2.189567] systemd[1]: Mounting Arbitrary Executable File Formats File System...
[    2.190394] initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
[    2.191303] systemd[1]: Starting Load/Save Random Seed...
[    2.191433] speakup 3.1.6: initialized
[    2.191434] synth name on entry is: (null)
[    2.201405] speakup_soft: module is from the staging directory, the quality is unknown, you have been warned.
[    2.201516] synth probe
[    2.201561] initialized device: /dev/softsynth, node (MAJOR 10, MINOR 26)
[    2.212218] systemd[1]: Starting udev Coldplug all Devices...
[    2.213825] systemd[1]: Starting Create Static Device Nodes in /dev...
[    2.216188] systemd[1]: Mounted Arbitrary Executable File Formats File System.
[    2.216696] systemd[1]: Started Load/Save Random Seed.
[    2.220055] systemd[1]: Started Set Up Additional Binary Formats.
[    2.237309] vboxdrv: Found 2 processor cores
[    2.238515] systemd[1]: Started Create Static Device Nodes in /dev.
[    2.238623] systemd[1]: Reached target Local File Systems (Pre).
[    2.240496] systemd[1]: Mounting /mnt/tmpdisk...
[    2.240756] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
[    2.243303] vboxdrv: fAsync=0 offMin=0x1b5 offMax=0x5ad
[    2.247145] systemd[1]: Mounting /tmp...
[    2.248133] systemd[1]: Mounting /mnt/ramdisk...
[    2.250142] systemd[1]: Starting udev Kernel Device Manager...
[    2.251400] systemd[1]: Mounted /tmp.
[    2.251440] systemd[1]: Mounted /mnt/tmpdisk.
[    2.270120] systemd[1]: Mounted /mnt/ramdisk.
[    2.310334] systemd[1]: Started Journal Service.
[    2.316408] systemd-journald[113]: Received request to flush runtime journal from PID 1
[    2.343395] vboxdrv: TSC mode is Synchronous, tentative frequency 2526999029 Hz
[    2.343397] vboxdrv: Successfully loaded version 5.0.4_OSE (interface 0x00240000)
[    2.395440] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[    2.395521] ACPI: Lid Switch [LID0]
[    2.395574] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[    2.395603] ACPI: Power Button [PWRB]
[    2.395654] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[    2.395682] ACPI: Power Button [PWRF]
[    2.396486] Monitor-Mwait will be used to enter C-1 state
[    2.396491] Monitor-Mwait will be used to enter C-2 state
[    2.396494] Monitor-Mwait will be used to enter C-3 state
[    2.396497] tsc: Marking TSC unstable due to TSC halts in idle
[    2.396513] ACPI: acpi_idle registered with cpuidle
[    2.396541] clocksource: Switched to clocksource hpet
[    2.399126] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    2.401515] acpi device:03: registered as cooling_device2
[    2.401586] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input6
[    2.410954] rtc_cmos 00:02: RTC can wake from S4
[    2.411391] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    2.411423] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    2.413086] ACPI: AC Adapter [ACAD] (on-line)
[    2.418581] toshiba_bluetooth: Toshiba ACPI Bluetooth device driver
[    2.424508] wmi: Mapper loaded
[    2.425512] toshiba_haps: Toshiba HDD Active Protection Sensor device
[    2.426669] toshiba_haps: HDD protection level set to: 2
[    2.426693] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.22
[    2.426995] toshiba_acpi: KBD function keys not supported
[    2.427600] input: Toshiba input device as /devices/virtual/input/input7
[    2.433337] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.433553] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.434395] ehci-pci: EHCI PCI platform driver
[    2.436686] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    2.436717] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    2.436741] ehci-pci 0000:00:1a.7: debug port 1
[    2.439978] toshiba_acpi: ECO led not installed
[    2.440633] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[    2.440650] ehci-pci 0000:00:1a.7: irq 19, io mem 0xf6404800
[    2.444562] toshiba_acpi: USB Rapid Charge not supported
[    2.446028] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    2.446095] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.446097] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.446099] usb usb1: Product: EHCI Host Controller
[    2.446101] usb usb1: Manufacturer: Linux 4.2.2-1-lqx ehci_hcd
[    2.446102] usb usb1: SerialNumber: 0000:00:1a.7
[    2.448038] hub 1-0:1.0: USB hub found
[    2.448047] hub 1-0:1.0: 6 ports detected
[    2.448456] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    2.448463] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    2.448477] ehci-pci 0000:00:1d.7: debug port 1
[    2.451147] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.451157] r8169 0000:0e:00.0: can't disable ASPM; OS doesn't have ASPM control
[    2.451550] r8169 0000:0e:00.0 eth0: RTL8168d/8111d at 0xffffc900016fc000, 00:26:22:e9:28:ed, XID 081000c0 IRQ 30
[    2.451552] r8169 0000:0e:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.452981] toshiba_acpi: Sleep and Music not supported
[    2.453422] toshiba_acpi: Panel Power on not supported
[    2.453698] toshiba_acpi: USB 3 not supported
[    2.456171] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    2.456192] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf6404c00
[    2.459266] nvidiafb 0000:01:00.0: BAR 3: can't reserve [mem 0xce000000-0xcfffffff 64bit pref]
[    2.459269] nvidiafb: cannot request PCI regions
[    2.461346] sdhci: Secure Digital Host Controller Interface driver
[    2.461348] sdhci: Copyright(c) Pierre Ossman
[    2.462210] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    2.462262] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.462264] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.462266] usb usb2: Product: EHCI Host Controller
[    2.462267] usb usb2: Manufacturer: Linux 4.2.2-1-lqx ehci_hcd
[    2.462269] usb usb2: SerialNumber: 0000:00:1d.7
[    2.462426] hub 2-0:1.0: USB hub found
[    2.462433] hub 2-0:1.0: 6 ports detected
[    2.464860] uhci_hcd: USB Universal Host Controller Interface driver
[    2.464976] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    2.464983] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    2.466047] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[    2.466108] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    2.466110] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.466112] usb usb3: Product: UHCI Host Controller
[    2.466114] usb usb3: Manufacturer: Linux 4.2.2-1-lqx uhci_hcd
[    2.466115] usb usb3: SerialNumber: 0000:00:1a.0
[    2.468223] hub 3-0:1.0: USB hub found
[    2.468232] hub 3-0:1.0: 2 ports detected
[    2.468717] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    2.468723] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    2.468758] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[    2.468807] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    2.468809] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.468811] usb usb4: Product: UHCI Host Controller
[    2.468812] usb usb4: Manufacturer: Linux 4.2.2-1-lqx uhci_hcd
[    2.468814] usb usb4: SerialNumber: 0000:00:1a.1
[    2.468936] hub 4-0:1.0: USB hub found
[    2.468942] hub 4-0:1.0: 2 ports detected
[    2.470658] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    2.470664] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    2.470691] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001840
[    2.470739] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    2.470741] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.470742] usb usb5: Product: UHCI Host Controller
[    2.470744] usb usb5: Manufacturer: Linux 4.2.2-1-lqx uhci_hcd
[    2.470745] usb usb5: SerialNumber: 0000:00:1a.2
[    2.470863] hub 5-0:1.0: USB hub found
[    2.470869] hub 5-0:1.0: 2 ports detected
[    2.472230] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    2.472237] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    2.472263] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
[    2.472308] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    2.472310] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.472312] usb usb6: Product: UHCI Host Controller
[    2.472313] usb usb6: Manufacturer: Linux 4.2.2-1-lqx uhci_hcd
[    2.472315] usb usb6: SerialNumber: 0000:00:1d.0
[    2.472417] hub 6-0:1.0: USB hub found
[    2.472423] hub 6-0:1.0: 2 ports detected
[    2.472579] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    2.472584] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    2.472608] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
[    2.472652] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    2.472654] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.472655] usb usb7: Product: UHCI Host Controller
[    2.472657] usb usb7: Manufacturer: Linux 4.2.2-1-lqx uhci_hcd
[    2.472659] usb usb7: SerialNumber: 0000:00:1d.1
[    2.472754] hub 7-0:1.0: USB hub found
[    2.472760] hub 7-0:1.0: 2 ports detected
[    2.472906] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    2.472911] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    2.472943] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[    2.473347] sdhci-pci 0000:20:00.0: SDHCI controller found [197b:2382] (rev 20)
[    2.473425] sdhci-pci 0000:20:00.0: No vmmc regulator found
[    2.473427] sdhci-pci 0000:20:00.0: No vqmmc regulator found
[    2.476365] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    2.476368] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.476370] usb usb8: Product: UHCI Host Controller
[    2.476372] usb usb8: Manufacturer: Linux 4.2.2-1-lqx uhci_hcd
[    2.476374] usb usb8: SerialNumber: 0000:00:1d.2
[    2.476512] hub 8-0:1.0: USB hub found
[    2.476519] hub 8-0:1.0: 2 ports detected
[    2.477019] mmc0: SDHCI controller on PCI [0000:20:00.0] using ADMA
[    2.477034] sdhci-pci 0000:20:00.2: SDHCI controller found [197b:2381] (rev 20)
[    2.477099] sdhci-pci 0000:20:00.2: Refusing to bind to secondary interface.
[    2.490637] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C1F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C0F (\_SB_.PCI0.SBUS.SMBI) (20150619/utaddress-254)
[    2.490644] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.493479] snd_hda_intel 0000:01:00.1: Disabling MSI
[    2.493488] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[    2.493940] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150619/utaddress-254)
[    2.493946] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.493950] ACPI Warning: SystemIO range 0x00000000000011B0-0x00000000000011BF conflicts with OpRegion 0x0000000000001180-0x00000000000011BB (\GPIO) (20150619/utaddress-254)
[    2.493953] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.493954] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011BB (\GPIO) (20150619/utaddress-254)
[    2.493957] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.493958] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    2.496621] [drm] Initialized drm 1.1.0 20060810
[    2.508609] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC272: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    2.508613] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    2.508615] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    2.508617] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    2.508619] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[    2.508620] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    2.508622] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x19
[    2.508624] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[    2.514314] input: PC Speaker as /devices/platform/pcspkr/input/input8
[    2.521577] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    2.521648] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    2.593330] ACPI: Battery Slot [BAT1] (battery present)
[    2.719501] Adding 1022972k swap on /dev/sdb2.  Priority:-1 extents:1 across:1022972k SSFS
[    2.753020] usb 1-6: new high-speed USB device number 2 using ehci-pci
[    2.762329] EXT4-fs (sdb10): mounted filesystem with ordered data mode. Opts: discard
[    2.776063] r8169 0000:0e:00.0 enp14s0: renamed from eth0
[    2.814076] ath: phy0: Enable LNA combining
[    2.819596] ath: EEPROM regdomain: 0x65
[    2.819598] ath: EEPROM indicates we should expect a direct regpair map
[    2.819600] ath: Country alpha2 being used: 00
[    2.819601] ath: Regpair used: 0x65
[    2.838511] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[    2.838582] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[    2.838629] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    2.838648] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[    2.838727] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[    2.838902] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90001e80000, irq=19
[    2.841892] iTCO_vendor_support: vendor-support=0
[    2.842351] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    2.842403] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
[    2.842509] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    2.853284] nvidia: module license 'NVIDIA' taints kernel.
[    2.853286] Disabling lock debugging due to kernel taint
[    2.855221] cfg80211: World regulatory domain updated:
[    2.855226] cfg80211:  DFS Master region: unset
[    2.855227] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    2.855230] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    2.855231] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    2.855233] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    2.855234] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    2.855236] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    2.855238] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    2.855240] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    2.855241] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    2.872211] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    2.872996] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
[    2.873177] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  340.93  Wed Aug 19 16:49:15 PDT 2015
[    2.942063] usb 8-2: new full-speed USB device number 2 using uhci_hcd
[    3.041228] usb 1-6: New USB device found, idVendor=064e, idProduct=c117
[    3.041233] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.041236] usb 1-6: Product: USB 2.0 HD Camera
[    3.041238] usb 1-6: Manufacturer: SuYin
[    3.041241] usb 1-6: SerialNumber: CN1014-P80A-OV031-VS-R01.03.00
[    3.100142] usb 8-2: New USB device found, idVendor=0930, idProduct=020f
[    3.100147] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.100150] usb 8-2: Product: Askey for Toshiba
[    3.100152] usb 8-2: Manufacturer: Broadcom Corp
[    3.100155] usb 8-2: SerialNumber: 0026B64FFE8E
[    4.050257] ath9k 0000:14:00.0 wlp20s0: renamed from wlan0
[    4.116627] media: Linux media interface: v0.10
[    4.128402] fuse init (API version 7.23)
[    4.142066] Linux video capture interface: v2.00
[    4.148594] Bluetooth: Core ver 2.20
[    4.148615] NET: Registered protocol family 31
[    4.148616] Bluetooth: HCI device and connection manager initialized
[    4.148621] Bluetooth: HCI socket layer initialized
[    4.148624] Bluetooth: L2CAP socket layer initialized
[    4.148632] Bluetooth: SCO socket layer initialized
[    4.153835] usbcore: registered new interface driver btusb
[    4.164351] uvcvideo: Found UVC 1.00 device USB 2.0 HD Camera  (064e:c117)
[    4.185167] input: USB 2.0 HD Camera  as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input16
[    4.185365] usbcore: registered new interface driver uvcvideo
[    4.185366] USB Video Class driver (1.1.1)
[    4.221227] psmouse serio1: synaptics: queried max coordinates: x [..5772], y [..5086]
[    4.444994] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000/0x0, board id: 0, fw id: 570026
[    4.445023] psmouse serio1: synaptics: Toshiba Satellite A500 detected, limiting rate to 40pps.
[    4.597118] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11
[    4.797264] zram: Added device: zram0
[    4.797405] zram: Added device: zram1
[    4.799000] zram0: detected capacity change from 0 to 834080768
[    4.829816] zram1: detected capacity change from 0 to 834080768
[    4.857760] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    4.857763] Bluetooth: BNEP filters: protocol multicast
[    4.857767] Bluetooth: BNEP socket layer initialized
[    4.898063] Adding 814528k swap on /dev/zram0.  Priority:100 extents:1 across:814528k SSFS
[    4.898424] Adding 814528k swap on /dev/zram1.  Priority:100 extents:1 across:814528k SSFS
[    4.944597] audit: type=1325 audit(1444773712.943:2): table=filter family=2 entries=0
[    4.944652] audit: type=1300 audit(1444773712.943:2): arch=c000003e syscall=175 success=yes exit=0 a0=7f5c0a3be010 a1=1b48 a2=41a17c a3=0 items=0 ppid=485 pid=537 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="modprobe" exe="/usr/bin/kmod" key=(null)
[    4.944659] audit: type=1327 audit(1444773712.943:2): proctitle=2F7362696E2F6D6F6470726F62650069707461626C655F66696C746572002D71
[    4.944960] audit: type=1325 audit(1444773712.943:3): table=filter family=2 entries=4
[    4.944973] audit: type=1300 audit(1444773712.943:3): arch=c000003e syscall=54 success=yes exit=0 a0=a a1=0 a2=40 a3=1946650 items=0 ppid=1 pid=485 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="connmand" exe="/usr/bin/connmand" key=(null)
[    4.944978] audit: type=1327 audit(1444773712.943:3): proctitle=2F7573722F62696E2F636F6E6E6D616E64002D6E002D2D6E6F646E7370726F7879
[    4.976720] audit: type=1325 audit(1444773712.949:4): table=filter family=2 entries=0
[    4.976899] audit: type=1300 audit(1444773712.949:4): arch=c000003e syscall=272 success=yes exit=0 a0=40000000 a1=7ffc97d7da40 a2=40004040 a3=7fe69c9b57c0 items=0 ppid=1 pid=542 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="(ostnamed)" exe="/usr/lib/systemd/systemd" key=(null)
[    4.976908] audit: type=1327 audit(1444773712.949:4): proctitle="(ostnamed)"
[    4.997532] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[    5.145000] IPv6: ADDRCONF(NETDEV_UP): wlp20s0: link is not ready
[    5.160998] NET: Registered protocol family 17
[    5.315075] r8169 0000:0e:00.0 enp14s0: link down
[    5.319629] IPv6: ADDRCONF(NETDEV_UP): enp14s0: link is not ready
[    6.002900] wlp20s0: authenticate with b4:e9:b0:81:ed:00
[    6.056090] wlp20s0: direct probe to b4:e9:b0:81:ed:00 (try 1/3)
[    6.257018] wlp20s0: send auth to b4:e9:b0:81:ed:00 (try 2/3)
[    6.268939] wlp20s0: authenticated
[    6.270018] wlp20s0: associate with b4:e9:b0:81:ed:00 (try 1/3)
[    6.344991] wlp20s0: RX AssocResp from b4:e9:b0:81:ed:00 (capab=0x421 status=0 aid=31)
[    6.345107] wlp20s0: associated
[    6.345143] IPv6: ADDRCONF(NETDEV_CHANGE): wlp20s0: link becomes ready
[    6.349949] ath: EEPROM regdomain: 0x8114
[    6.349950] ath: EEPROM indicates we should expect a country code
[    6.349951] ath: doing EEPROM country->regdmn map search
[    6.349952] ath: country maps to regdmn code: 0x37
[    6.349953] ath: Country alpha2 being used: DE
[    6.349953] ath: Regpair used: 0x37
[    6.349954] ath: regdomain 0x8114 dynamically updated by country IE
[    6.349983] cfg80211: Regulatory domain changed to country: DE
[    6.349985] cfg80211:  DFS Master region: ETSI
[    6.349985] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    6.349986] cfg80211:   (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    6.349988] cfg80211:   (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    6.349990] cfg80211:   (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    6.349991] cfg80211:   (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s)
[    6.349992] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[    6.400868] wlp20s0: Limiting TX power to 13 dBm as advertised by b4:e9:b0:81:ed:00
[    6.565851] vboxguest: PCI device not found, probably running on physical hardware.
[    6.615189] vboxguest: PCI device not found, probably running on physical hardware.
[    6.654071] VBoxNetAdp: Successfully started.
[    6.657022] VBoxNetFlt: Successfully started.
[    6.664794] VBoxPciLinuxInit
[    6.673278] vboxpci: IOMMU not found (not registered)
[    6.884214] NVRM: Your system is not currently configured to drive a VGA console
[    6.884218] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[    6.884220] NVRM: requires the use of a text-mode VGA console. Use of other console
[    6.884221] NVRM: drivers including, but not limited to, vesafb, may result in
[    6.884222] NVRM: corruption and stability problems, and is not supported.
[    8.519426] audit_printk_skb: 60 callbacks suppressed
[    8.519429] audit: type=1006 audit(1444773717.344:11): pid=2448 uid=0 old-auid=4294967295 auid=1000 old-ses=4294967295 ses=1 res=1
[    8.535954] audit: type=1006 audit(1444773717.360:12): pid=2463 uid=0 old-auid=4294967295 auid=1000 old-ses=4294967295 ses=2 res=1
[    9.039702] audit: type=1325 audit(1444773717.864:13): table=filter family=2 entries=0
[    9.039716] audit: type=1325 audit(1444773717.864:13): table=mangle family=2 entries=0
[    9.040177] audit: type=1325 audit(1444773717.864:13): table=nat family=2 entries=0
[    9.040373] audit: type=1300 audit(1444773717.864:13): arch=c000003e syscall=272 success=yes exit=0 a0=40000000 a1=7ffc97d7da40 a2=40004040 a3=7fe69c9b57c0 items=0 ppid=1 pid=2850 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="(t-daemon)" exe="/usr/lib/systemd/systemd" key=(null)
[    9.040380] audit: type=1327 audit(1444773717.864:13): proctitle="(t-daemon)"
[    9.802104] ata2.00: configured for UDMA/100
[    9.802112] ata2: EH complete
[    9.819631] ata5.00: failed to get NCQ Send/Recv Log Emask 0x1
[    9.819818] ata5.00: failed to get NCQ Send/Recv Log Emask 0x1
[    9.819821] ata5.00: configured for UDMA/133
[    9.819829] ata5: EH complete
[   83.590583] wlp20s0: Limiting TX power to 13 dBm as advertised by b4:e9:b0:81:ed:00
[  158.106435] wlp20s0: deauthenticating from b4:e9:b0:81:ed:00 by local choice (Reason: 3=DEAUTH_LEAVING)
[  158.114779] IPv6: ADDRCONF(NETDEV_UP): wlp20s0: link is not ready
[  158.131566] cfg80211: World regulatory domain updated:
[  158.131570] cfg80211:  DFS Master region: unset
[  158.131571] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[  158.131574] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[  158.131575] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[  158.131577] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[  158.131579] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[  158.131581] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[  158.131582] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[  158.131584] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[  158.131585] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[  164.506950] wlp20s0: authenticate with b4:e9:b0:81:ed:00
[  164.528965] wlp20s0: send auth to b4:e9:b0:81:ed:00 (try 1/3)
[  164.536661] wlp20s0: authenticated
[  164.537049] wlp20s0: associate with b4:e9:b0:81:ed:00 (try 1/3)
[  164.609154] wlp20s0: RX AssocResp from b4:e9:b0:81:ed:00 (capab=0x421 status=0 aid=31)
[  164.609256] wlp20s0: associated
[  164.609287] IPv6: ADDRCONF(NETDEV_CHANGE): wlp20s0: link becomes ready
[  164.614296] ath: EEPROM regdomain: 0x8114
[  164.614299] ath: EEPROM indicates we should expect a country code
[  164.614300] ath: doing EEPROM country->regdmn map search
[  164.614301] ath: country maps to regdmn code: 0x37
[  164.614302] ath: Country alpha2 being used: DE
[  164.614303] ath: Regpair used: 0x37
[  164.614304] ath: regdomain 0x8114 dynamically updated by country IE
[  164.614333] cfg80211: Regulatory domain changed to country: DE
[  164.614334] cfg80211:  DFS Master region: ETSI
[  164.614335] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[  164.614337] cfg80211:   (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[  164.614339] cfg80211:   (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[  164.614341] cfg80211:   (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[  164.614343] cfg80211:   (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s)
[  164.614344] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[  164.644633] wlp20s0: Limiting TX power to 13 dBm as advertised by b4:e9:b0:81:ed:00
[  186.751193] cfg80211: World regulatory domain updated:
[  186.751196] cfg80211:  DFS Master region: unset
[  186.751198] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[  186.751200] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[  186.751202] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[  186.751203] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[  186.751205] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[  186.751207] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[  186.751209] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[  186.751211] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[  186.751212] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[  186.754340] IPv6: ADDRCONF(NETDEV_UP): wlp20s0: link is not ready
[  187.076558] wlp20s0: authenticate with b4:e9:b0:80:bb:00
[  187.101415] wlp20s0: send auth to b4:e9:b0:80:bb:00 (try 1/3)
[  187.156284] wlp20s0: send auth to b4:e9:b0:80:bb:00 (try 2/3)
[  187.227448] wlp20s0: send auth to b4:e9:b0:80:bb:00 (try 3/3)
[  187.315574] wlp20s0: authentication with b4:e9:b0:80:bb:00 timed out
[  217.730283] IPv6: ADDRCONF(NETDEV_UP): wlp20s0: link is not ready
[  218.002797] wlp20s0: authenticate with b4:e9:b0:81:ed:00
[  218.016272] wlp20s0: send auth to b4:e9:b0:81:ed:00 (try 1/3)
[  218.020145] wlp20s0: authenticated
[  218.021122] wlp20s0: associate with b4:e9:b0:81:ed:00 (try 1/3)
[  218.095596] wlp20s0: RX AssocResp from b4:e9:b0:81:ed:00 (capab=0x421 status=0 aid=31)
[  218.095693] wlp20s0: associated
[  218.095724] IPv6: ADDRCONF(NETDEV_CHANGE): wlp20s0: link becomes ready
[  218.104474] ath: EEPROM regdomain: 0x8114
[  218.104477] ath: EEPROM indicates we should expect a country code
[  218.104478] ath: doing EEPROM country->regdmn map search
[  218.104479] ath: country maps to regdmn code: 0x37
[  218.104480] ath: Country alpha2 being used: DE
[  218.104481] ath: Regpair used: 0x37
[  218.104482] ath: regdomain 0x8114 dynamically updated by country IE
[  218.104512] cfg80211: Regulatory domain changed to country: DE
[  218.104513] cfg80211:  DFS Master region: ETSI
[  218.104514] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[  218.104516] cfg80211:   (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[  218.104518] cfg80211:   (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[  218.104520] cfg80211:   (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[  218.104522] cfg80211:   (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s)
[  218.104523] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[  218.123520] wlp20s0: Limiting TX power to 13 dBm as advertised by b4:e9:b0:81:ed:00


ha bir de şunları buldum ama işimi görmediler
http://forums.fedoraforum.org/showthread.php?t=305287
https://bbs.archlinux.org/viewtopic.php?id=194002
http://askubuntu.com/questions/328152/how-to-disable-wifi-power-management-rtlwifi-rtl8192cu
''Eğer 386BSD ben Linux'a başladığımda var olsaydı, Linux büyük bir olasılıkla olmazdı."
........................Linus Torvalds..........................
İnsanın aradığı sadece huzur ve mutluluktur, 1 numara olmak yalnız kalmak demektir ve 1 numara kalmak için birçok şeyi feda etmek zorunda kalırsın...

heartsmagic

dmesg tarafında bir şey göremedim. Tam bağlantı kopması anında bir:
dmesg|tail
çıktısı acaba fikir verir mi?
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?


Böylece yalan, dünyanın düzenine dönüştürülüyor.

cokomoko

┌─[cokomoko]──[cokomoko]:~$
└──>>dmesg|tail
[  106.087796] ath: regdomain 0x8114 dynamically updated by country IE
[  106.087825] cfg80211: Regulatory domain changed to country: DE
[  106.087825] cfg80211:  DFS Master region: ETSI
[  106.087827] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[  106.087829] cfg80211:   (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[  106.087831] cfg80211:   (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[  106.087833] cfg80211:   (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[  106.087834] cfg80211:   (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s)
[  106.087836] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[  106.149755] wlp20s0: Limiting TX power to 16 dBm as advertised by b4:e9:b0:81:ed:00



Bak şimdi şunu farkettim eğer kyk wifi'ye bağlanırsam conky'deki saat, 4 saat geri geliyor ve yine conky'deki mpdbar eğer kykwifi'de 5-10dk geçirirsem çalışmıyor.Oysa evdeki wifi'de böyle bir sorun olmuyordu.
''Eğer 386BSD ben Linux'a başladığımda var olsaydı, Linux büyük bir olasılıkla olmazdı."
........................Linus Torvalds..........................
İnsanın aradığı sadece huzur ve mutluluktur, 1 numara olmak yalnız kalmak demektir ve 1 numara kalmak için birçok şeyi feda etmek zorunda kalırsın...

neynefes

Kyk'nın kablosuz bağlantısından nefret etmiştim. Son hali nasıl bilmiyorum ama TC kimlik numarası ve şifreyle giriş yapıyorduk. Kopmalar çok olmuyordu ama normalde de kullanmıyordum ki interneti. Başlığı takipteyim :)

cokomoko

Alıntı yapılan: neynefes - 19 Ekim 2015 - 21:44:53
Kyk'nın kablosuz bağlantısından nefret etmiştim. Son hali nasıl bilmiyorum ama TC kimlik numarası ve şifreyle giriş yapıyorduk. Kopmalar çok olmuyordu ama normalde de kullanmıyordum ki interneti. Başlığı takipteyim :)

Yine aynı şekilde giriliyor, kopmalar sadece Arch'ta oluyor, diğer sistemlerde sorun yoktu denediğim kadarıyla windows'ta zaten hiç kopmuyor. Ben de zaten ufak-tefek işler için arada da canım sıkılınca kafa dağıtmak için paket çekiyorum, bazen komple güncelleme yapıyorum. Zaten millet sabah-akşam yükleniyor modeme pek keyif verdiği söylenemez, ağı benim makine üzerinden geçirsem biraz hızlanıyor ama makinem dayanmıyor bir süre sonra dışarı atıyor beni.Yine de ufak tefek işleri görüyor.
''Eğer 386BSD ben Linux'a başladığımda var olsaydı, Linux büyük bir olasılıkla olmazdı."
........................Linus Torvalds..........................
İnsanın aradığı sadece huzur ve mutluluktur, 1 numara olmak yalnız kalmak demektir ve 1 numara kalmak için birçok şeyi feda etmek zorunda kalırsın...

heartsmagic

Pek bir şey görünmüyor gibi. Hani bir önerim yok ne yazık ki.
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?


Böylece yalan, dünyanın düzenine dönüştürülüyor.

cokomoko

Bu sorunu çözdüm artık bağlantı kopmuyor ama internet linux üzerinde son derece yavaş, oysa windows'ta öyle değil.Bu Kykwifi bayağı sorunlu çıktı, illa windows diyor sanırım biraz daha kurcalamam araştırmam lazım.
Unutmazsam konuya tekrar geri bildirim yapacağım. 
''Eğer 386BSD ben Linux'a başladığımda var olsaydı, Linux büyük bir olasılıkla olmazdı."
........................Linus Torvalds..........................
İnsanın aradığı sadece huzur ve mutluluktur, 1 numara olmak yalnız kalmak demektir ve 1 numara kalmak için birçok şeyi feda etmek zorunda kalırsın...

neynefes

Yavaş olma sıkıntısı yaşamamıştım ben kyk'da.. Benim sistemim Ubuntu'ydu hep. Yetersiz bir alt yapısı var sistemin zaten. Güya fiberle dolaştırdılar yurdun içinde interneti. Bilmiyorum yüzlerce kişiye bağlantı sağlamanın farklı ve kaliteli yolları vardır herhalde?

cokomoko

Alıntı yapılan: neynefes - 30 Ekim 2015 - 01:23:04
Yavaş olma sıkıntısı yaşamamıştım ben kyk'da.. Benim sistemim Ubuntu'ydu hep. Yetersiz bir alt yapısı var sistemin zaten. Güya fiberle dolaştırdılar yurdun içinde interneti. Bilmiyorum yüzlerce kişiye bağlantı sağlamanın farklı ve kaliteli yolları vardır herhalde?

Onu geçiyorum zaten o bilinen bir problem, o konuya girersem bir daha zor çıkarım.
Mesela Ubuntu veya Arch'ta youtube'dan bir video açıyorum, görüntü donarak geliyor, takılıyor veya paket çekiyorum, yavaş çekiyor, çözünürlük değişmemek kaydıyla aynı videoyu windows'tan bağlanıp açıyorum, hiç donma yok veya birşey indiriyorum, sorunsuz ve makul bir hızla iniyor.
Ama bu sorunları komşumun kablosuz ağından yararlanırken yaşamıyorum, çok garip geliyor bana.
''Eğer 386BSD ben Linux'a başladığımda var olsaydı, Linux büyük bir olasılıkla olmazdı."
........................Linus Torvalds..........................
İnsanın aradığı sadece huzur ve mutluluktur, 1 numara olmak yalnız kalmak demektir ve 1 numara kalmak için birçok şeyi feda etmek zorunda kalırsın...

neynefes

Görüntü donma diyince ekran kartı mı acaba dedim ama başka bir bağlantı da sorun olmaması da ayrı düşüncelere dalmama sebep oluyor. Kafam allak bullak oldu gece gece :)

cokomoko

Bir de şöyle birşey var, mesela Kykwifi Arch veya Ubuntu'da sinyal kalitesi olarak daha iyi çekiyor %60-70 civarı.Windows'ta ise daha kötü çekiyor ama sorun yaşamadan nette dolaşabiliyorum.
Zaten Kykwifi'de yapamadıklarımı şu an komşumun kablosuz ağından sorunsuz hallediyorum, hatta benim bağlantımı kardeşimin bilgisayarıyla ve tv ile paylaşıyorum, buna rağmen hiç sorun yok.
Birşey anlamadım kykwifi'den, daha fazla incelemem denemem lazım, olmadı bir de üniversite kablosuz ağını deneyeceğim onda da böyle bir sorun yaşarsam, başka şeyler aklıma gelecek.
''Eğer 386BSD ben Linux'a başladığımda var olsaydı, Linux büyük bir olasılıkla olmazdı."
........................Linus Torvalds..........................
İnsanın aradığı sadece huzur ve mutluluktur, 1 numara olmak yalnız kalmak demektir ve 1 numara kalmak için birçok şeyi feda etmek zorunda kalırsın...

neynefes

Takipteyim hocam gelişmeleri bildirin.

Sh4oTT

Kyk benim icinde sıkıntılıydı :( Telefondan baglandigim da 1 saniye icinde 3-5 defa baglanip baglanti kopuyordu surekli olarak, yalniz geceleri 3 den sonra sabah 8-9 lara kadar baglanabiliyordum. Ayrica kyk oturum acma ekranina tc ve sifremi yazdiktan 10 dk sonra falan tekrar girdigimde Hosgeldiniz Gozde Ozcelik, Ezgi Sena Erkinci bir kac isim daha vardi boyle isimler yaziyordu :) Sorunu o zamanlar cozememistim cok kotu bi durumdu :(

cokomoko

@ShaoTT sizinki bayağı garipmiş :)
''Eğer 386BSD ben Linux'a başladığımda var olsaydı, Linux büyük bir olasılıkla olmazdı."
........................Linus Torvalds..........................
İnsanın aradığı sadece huzur ve mutluluktur, 1 numara olmak yalnız kalmak demektir ve 1 numara kalmak için birçok şeyi feda etmek zorunda kalırsın...

neynefes

Gözde Özçelik? Enteresan :)

Sh4oTT

#17
Sormayin yahu bilgisayarim da yoktu her gece sabahliyordum internet icin :)
Yalniz sorun benin telefondaydi ama cozemedim :) cunku arkadasin telden tc ve sifreyle firince sorun olmuyordu.

heartsmagic

KYK tarafında sorun sanırım ara ara karşı tarafa bağlantının kopması. En azından eski konulardan öyle hatırlıyorum. Her ağ kartında bu yaşanmıyor olabilir ancak bazılarında yaşandığı aşikar. Gerçi benim bu hatırladığım şey Eduroam ile ilgiliydi. 
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?


Böylece yalan, dünyanın düzenine dönüştürülüyor.

lafurus

KYK internet bağlantısı ben de çok yavaştı. 1kb/s anca indirme yapabiliyordum, sitelere girmek zulum oluyordu. Şuan ufak bir değişiklik yaptım bağlantı ayarlarında bu saate göre biraz daha normal bir internet hızına ulaşabildim (20kb/s indirme yapabiliyorum şuan.). Sanırım hala Windows'a göre çok daha yavaş, fakat buna emin olamıyorum. Yaptığım şey IPv6 privacy extensions'u enabled (prefer public address) şekline getirmek oldu. Bence bu bağlantı ayarlarımızla ilgili bir sorun, Windows bunları otomatik olarak algılayıp yapılandırıyor. Hatta şuan fark ettim Windows'a göre şuan gerçekten çok daha yavaş. Fakat az önce dediğim ayarı yapmadan önceye göre çok daha hızlı (öncesinde internet yok, var arasındaydı.)

Biraz KYK internetinden bahsedim belki daha yardımcı olabilecek birileri çıkar (tam olarak nelerin bilinmesi gerekiyor bilmiyorum o yüzden deneyimlerimden anlatacağım):
-Yurtta her binada bir büyük siyah kutu var :D. İnternet bağlantısını oradan her kattaki modemlere dağıtıyor. (Mesela benim bulunduğum binada sanırım 5 modem var. Şuan bulunduğum katta 2, diğer 3 katta 1).
-Doğrudan bir hız sınırlaması yok sistemde, Gelen interneti kullanıcılara paylaştırmak gibi işliyor. Yani bu saatlerde 100kb/s gibi indirme hızındayken mesela, sabaha karşı girdiğimizde 2mb/s lere kadar tırmanabiliyor. Yani gördüğüm kadarıyla ne varsa dağıtıyor.
-Şöyle bir şey var doğru modeme arada bağlanamıyorum sanırım, Windows'da da olurdu ama hızı o kadar da etkilemezdi. Mesela şuan modem 5 metre ilerimde ve aramızda hiç engel duvar vs yok ama o 5 çizikten 2 tanesi yanıyor. Kendi odamda arada 3 oda varken modeme yine hemen aynı. Anladığım kadarıyla şuan bu kattaki diğer modeme bağlıyım gibi. Ve modemi kendimiz seçmiyoruz, tek bağlantı var KYK Wifi olarak gözüken çevrende ne kadar modem olsa bile.
-Ayrıca normalde internet hızı çok yavaşken İDM gibi programlarla daha yüksek hızda indirme yapabiliyoruz (bu daha yüksek ciddi bir daha yüksek). Biraz diğerlerinden çalıyoruz sanırım. Hatta kendim de fark edebiliyorum yan tarafta İDM açılınca benden hız düştüğünü.
-KYK'da torrente ciddi bir engel konmuş, torrent kullanabilen görmedim. DNS, VPN kullanıp Torrent açınca mesela indirme hızı çok yavaş oluyor (internet hızlı bile olsa). Sanırım İDM ve Torrent gibi programlar bir şekilde gelen internetin hepsini çekiyor, KYK'nın paylaştırma olayını es geçiyor, 3-4 sene önce VPN ile torrent açılabiliyormuş ve herkesin interneti baya yavaşlıyormuş torrentciler sebebiyle, okuduğum kadarıyla.

Bana sorun bağlantı ayarları ile ilgili gibi geliyor.

Ayrıca bunu yazarken bir yandan da denemeler yaptım. Arkadaşın bilgisayarını aldım ve bilgisayarları yan yana koydum (benimki 8 yıllık bir bilgisayar, onunki bu sene alınmış donanımını bilmiyorum ama iyi para ödedi, WLAN kartı kesinlikle daha iyidir :D ) speed testi açtım ve benim bağlantım genellikle 0.5 mbps daha hızlı görünüyordu. Fakat hala onun interneti daha hızlı kesinlikle, tarayıcıda gezinirken. Ayrıca o IDM açınca ulaşabildiği download hızına ubuntuda kesinlikle ulaşamıyorum. Ve son olarak speedtest'te yukardaki dediğim ayarın eski halinde ve yeni halinde de 1mbps e yakın fark var.