plesk panel kurarken hata

[RyanZero]

merhaba arkadaşlar plesk panel kurarken şöyle bir hata alıyorum yardımlarınızı bekliyorum

root@turkeybilisim:~/plesk# curl http://autoinstall.plesk.com/one-click-installer | sh
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 6727 100 6727 0 0 50237 0 --:--:-- --:--:-- --:--:-- 50578
--2016-12-07 14:55:14-- http://autoinstall.plesk.com/Paralle...u_16.10_x86_64
autoinstall.plesk.com (autoinstall.plesk.com) çözümleniyor... 185.87.26.36
autoinstall.plesk.com (autoinstall.plesk.com)[185.87.26.36]:80 bağlanılıyor... bağlantı kuruldu.
HTTP isteği gönderildi, cevap bekleniyor... 404 Not Found
2016-12-07 14:55:14 HATA 404: Not Found.
ERROR: Unable to run Plesk Installer. Possible reasons:
1) You are trying to run Plesk Installer on an unsupported OS. Your OS is Ubuntu-16.10. The list of supported OS is at http://docs.plesk.com/release-notes/...-requirements/
2) Temporary network problem. Check your connection to autoinstall.plesk.com, contact your provider or open a support ticket.
root@turkeybilisim:~/plesk# http://autoinstall.plesk.com/one-click-installer
-bash: http://autoinstall.plesk.com/one-click-installer: Böyle bir dosya ya da dizin yok
root@turkeybilisim:~/plesk# wget -O - http://autoinstall.plesk.com/one-click-installer
--2016-12-07 14:58:37-- http://autoinstall.plesk.com/one-click-installer
autoinstall.plesk.com (autoinstall.plesk.com) çözümleniyor... 185.87.26.36
autoinstall.plesk.com (autoinstall.plesk.com)[185.87.26.36]:80 bağlanılıyor... bağlantı kuruldu.
HTTP isteği gönderildi, cevap bekleniyor... 200 OK
Uzunluk: 6727 (6,6K) [text/plain]
Kayıt yeri: `STDOUT'

- 0%[ ] 0 --.-KB/s #!/bin/sh

### There are two modes this source code is working in (as a result two corresponding scripts are produced):
### 1. one-click-installer - always installs the latest available version of Plesk for an environment, where the installer was executed
### 2. plesk-installer - just transparently for a user downloads autoinstaller binary, which corresponds to an environment, where the installer was executed
### 'current_mode' is defined on building stage to produce two scripts from one source
current_mode="one-click-installer"

set -efu

die()
{
echo "ERROR: $*" >&2
exit 1
}

verbose()
{
if [ -n "$verbose" ]; then
echo "$@" >&2
fi
}

check_root()
{
if [ `id -u` -ne 0 ]; then
die "You should have superuser privileges to install Plesk"
fi
}

check_for_upgrade()
{
local prefix
local version=
for prefix in /opt/psa /usr/local/psa; do
if [ -e "$prefix/version" ]; then
version=`cat $prefix/version | awk '{ print $1 }'`
break
elif [ -f "$prefix/core.version" ]; then
version=`cat $prefix/core.version | awk '{ print $1 }'`
break
fi
done

if [ -n "$version" ]; then
verbose "You have Plesk v $version installed."
if [ "$current_mode" = "one-click-installer" ]; then
### we should stop installation of the latest available version if some Plesk version is already installed
echo "Please, use Plesk Installer from Web Interface or CLI (can be downloaded from http://autoinstall.plesk.com/plesk-installer)" >&2
exit 0
fi
fi
}

fetch_file()
{
local url=$1
local target=$2

if [ -x "/usr/bin/wget" ]; then
cmd="/usr/bin/wget $url -O $target"
elif [ -x "/usr/bin/curl" ]; then
cmd="/usr/bin/curl -fv $url -o $target"
elif [ -x "/usr/bin/fetch" ]; then
cmd="/usr/bin/fetch -o $target $url"
else
die "Unable to find download manager(fetch, wget, curl)"
fi

verbose "Transport command is $cmd"

$cmd
}

fetch_url()
{
local ai_name="$1"
local ai_dest="$2"
local ai_url

shift 2
for ai_src in "$@"; do
ai_url="$ai_src/Parallels_Installer/$ai_name"
fetch_file "$ai_url" "$ai_dest" && return 0
done
return 1
}

fetch_autoinstaller()
{
local ai_name="$1"
local ai_dest="$2"
local sources
local fetch_output=
local fetch_rc=0

rm -f "$ai_dest" >/dev/null 2>&1

if [ -n "${SKIP_DEFAULT_INSTALLER_DOWNLOAD_SOURCE:+X}" ]; then
[ -n "$source" ] || die "No source specified to download the Plesk Installer from"
sources="$source"
else
sources="$source http://autoinstall.plesk.com"
fi

fetch_output=`fetch_url "$ai_name" "$ai_dest" $sources 2>&1` || fetch_rc=$?
[ "$fetch_rc" -eq 0 -a -z "$verbose" ] || echo "$fetch_output"
[ "$fetch_rc" -eq 0 ] || die "Unable to run Plesk Installer. Possible reasons:
1) You are trying to run Plesk Installer on an unsupported OS. Your OS is $os_name-$os_version. The list of supported OS is at http://docs.plesk.com/release-notes/...-requirements/
2) Temporary network problem. Check your connection to autoinstall.plesk.com, contact your provider or open a support ticket."

chmod 0700 "$ai_dest"
}

get_os_info()
{
[ -e '/bin/uname' ] && uname='/bin/uname' || uname='/usr/bin/uname'
arch=`uname -m`
local os_sn

case $arch in
i?86) arch="i386" ;;
*) : ;;
esac

opsys=`uname -s`
if [ "$opsys" = 'Linux' ]; then
if [ -e '/etc/debian_version' ]; then
if [ -e '/etc/lsb-release' ]; then
# Mostly ubuntu, but debian can have it
. /etc/lsb-release
os_name=$DISTRIB_ID
os_version=$DISTRIB_RELEASE
else
os_name='Debian'
os_version=`head -1 /etc/debian_version`
fi
case $os_name in
Debian)
os_version=`echo $os_version | grep -o "^[0-9]\+"`
[ -z "$os_version" ] || os_version="$os_version.0"
;;
Ubuntu)
;;
*)
die "Unknown OS: $os_name-$os_version-$arch"
;;
esac
elif [ -e '/etc/SuSE-release' ]; then
os_name='SuSE'
os_version=`head -1 /etc/SuSE-release | sed -e 's/[^0-9.]*\([0-9.]*\).*/\1/g'`
if grep -q 'Enterprise Server' /etc/SuSE-release; then
os_version="es$os_version"
fi
elif [ -e '/etc/fedora-release' ]; then
os_name='FedoraCore'
os_version=`head -1 /etc/fedora-release | sed -e 's/[^0-9.]*\([0-9.]*\).*/\1/g'`
elif [ -e '/etc/redhat-release' ]; then
os_name=`awk '{print $1}' /etc/redhat-release`
os_version=`head -1 /etc/redhat-release | sed -e 's/[^0-9.]*\([0-9.]*\).*/\1/g'`
# for rh based os get only major
os_version=`echo $os_version | awk -F'.' '{print $1}'`
case $os_name$os_version$arch in
CentOS4*i386) os_version="4.2" ;;
CentOS4*x86_64) os_version="4.3" ;;
CentOS*|Cloud*|Virtuozzo*) os_version=`echo $os_version | awk -F'.' '{print $1}'` ;;
Red*) os_name="RedHat"; os_version="el`echo $os_version | awk -F'.' '{print $1}'`" ;;
*) die "Unknown OS: $os_name-$os_version-$arch" ;;
esac
else
die "Unable to detect OS"
fi
else
die "Unable to detect OS"
fi

[ -n "$os_name" ] || die "Unable to detect OS"
[ -n "$os_version" ] || die "Unable to detect $os_name OS version"
[ -n "$arch" ] || die "Unable to detect system architecture"

if [ "$os_name" = "RedHat" -a "$os_version" = "el7" ]; then
os_name="CentOS"
os_version="7"
fi

if [ "$os_name" = "Virtuozzo" -a "$os_version" = "7" ]; then
os_name="VZLinux"
os_version="7"
fi

verbose "Detected os $os_name-$os_version-$arch"
}

unset GREP_OPTIONS

verbose=
dry_run=
os_name=
os_version=
arch=
source=
tiers="release,stable"

parse_args()
{
while [ "$#" -gt 0 ]; do
case "$1" in
--source)
source="$2"
[ "$#" -ge 2 ] && shift 2 || break
;;
--tier)
[ "$current_mode" != "one-click-installer" ] || tiers="$2"
[ "$#" -ge 2 ] && shift 2 || break
;;
-v)
[ "$current_mode" != "one-click-installer" ] || verbose=1
shift
;;
-n)
[ "$current_mode" != "one-click-installer" ] || dry_run=1
shift
;;
*)
shift
;;
esac
done
}

parse_args "$@"
check_root
check_for_upgrade

get_os_info

ai_name="parallels_installer_${os_name}_${os_versi on}_${arch}"
ai_dest='/var/cache/parallels_installer/installer'
ai_dest_dir=`dirname $ai_dest`
if [ ! -d "$ai_dest_dir" ]; then
mkdir -p "$ai_dest_dir"
chmod 0700 "$ai_dest_dir"
fi
fetch_autoinstaller "$ai_name" "$ai_dest"

ai_args=
if [ "$current_mode" = "one-click-installer" ]; then
ai_args="--select-product-id plesk --select-release-latest --tier $tiers --installation-type Typical"
[ -z "$source" ] || ai_args="$ai_args --source $source"
fi

if [ -n "$ai_args" ]; then
verbose "The following command will run: $ai_dest $ai_args"
[ -n "$dry_run" ] || exec "$ai_dest" $ai_args
else
verbose "The following command will run: $ai_dest $*"
[ -n "$dry_run" ] || exec "$ai_dest" "$@"
fi

[ -z "$dry_run" ] || rm -f "$ai_dest"
- 100%[===================>] 6,57K --.-KB/s in 0s

2016-12-07 14:58:37 (635 MB/s) - stdout [6727/6727] içine yazıldı

root@turkeybilisim:~/plesk#

[if]

Ubuntu 16.10 desteklenmiyor[1]. Ubuntu'nun desteklenen bir sürümünü kurduktan sonra Plesk kurulumuna geçin.

whet ardından sh komutunu uygulamayın[2]. wget'le çektikten sonra betiği inceleyin; çalıştırma izni verin ve çalıştırın.

[1] https://docs.plesk.com/release-notes/17.0/software-requirements/#s2-1
[2] https://news.ycombinator.com/item?id=6650987