Açılış Süresi Kısaltılabilir mi?

[Nabi]

Merhabalar. Unity masa üstüne gelmesi y aklaşık 1dk 25 saniye sürüyor.  açılış süresi bir dakikanın altına düşer mi?

Kod Seç Genişlet

mega@ubi:~$ uname -a
Linux ubi 4.4.0-40-generic #60-Ubuntu SMP Fri Sep 23 16:45:45 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux


Kod Seç Genişlet

mega@ubi:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=16.04
DISTRIB_CODENAME=xenial
DISTRIB_DESCRIPTION="Ubuntu 16.04.1 LTS"


Kod Seç Genişlet

mega@ubi:~$ systemd-analyze
Startup finished in 5.376s (kernel) + 30.544s (userspace) = 35.921s


Kod Seç Genişlet

mega@ubi:~$ systemd-analyze blame
         12.002s dev-sda7.device
         11.268s apparmor.service
         10.503s ModemManager.service
          9.711s snapd.firstboot.service
          7.580s accounts-daemon.service
          6.835s console-setup.service
          6.476s NetworkManager.service
          5.417s grub-common.service
          5.310s apport.service
          4.438s ondemand.service
          4.207s networking.service
          4.039s gpu-manager.service
          4.039s rsyslog.service
          3.887s systemd-logind.service
          3.834s alsa-restore.service
          3.827s pppd-dns.service
          3.801s bluetooth.service
          3.801s avahi-daemon.service
          3.784s systemd-tmpfiles-setup.service
          3.595s lightdm.service
          3.488s colord.service
          3.049s systemd-udevd.service
          3.045s polkitd.service
          2.122s thermald.service
          1.867s binfmt-support.service
          1.679s dns-clean.service
          1.480s resolvconf.service
          1.458s keyboard-setup.service
          1.445s systemd-tmpfiles-setup-dev.service
          1.155s systemd-modules-load.service
          1.152s systemd-rfkill.service
         12.002s dev-sda7.device
         11.268s apparmor.service
         10.503s ModemManager.service
          9.711s snapd.firstboot.service
          7.580s accounts-daemon.service
          6.835s console-setup.service
          6.476s NetworkManager.service
          5.417s grub-common.service
          5.310s apport.service
          4.438s ondemand.service
          4.207s networking.service
          4.039s gpu-manager.service
          4.039s rsyslog.service
          3.887s systemd-logind.service
          3.834s alsa-restore.service
          3.827s pppd-dns.service
          3.801s bluetooth.service
          3.801s avahi-daemon.service
          3.784s systemd-tmpfiles-setup.service
          3.595s lightdm.service
          3.488s colord.service
          3.049s systemd-udevd.service
          3.045s polkitd.service
lines 1-23



Kod Seç Genişlet

mega@ubi:~$ lsmod
Module                  Size  Used by
drbg                   32768  1
ansi_cprng             16384  0
ctr                    16384  3
ccm                    20480  3
btrfs                 987136  0
xor                    24576  1 btrfs
raid6_pq              102400  1 btrfs
ufs                    73728  0
qnx4                   16384  0
hfsplus               106496  0
hfs                    57344  0
minix                  36864  0
ntfs                   98304  0
msdos                  20480  0
jfs                   180224  0
xfs                   970752  0
libcrc32c              16384  1 xfs
cpuid                  16384  0
bnep                   20480  2
bbswitch               16384  0
uvcvideo               90112  0
videobuf2_vmalloc      16384  1 uvcvideo
videobuf2_memops       16384  1 videobuf2_vmalloc
arc4                   16384  2
iwldvm                233472  0
videobuf2_v4l2         28672  1 uvcvideo
mac80211              737280  1 iwldvm
intel_rapl             20480  0
videobuf2_core         36864  2 uvcvideo,videobuf2_v4l2
v4l2_common            16384  1 videobuf2_v4l2
snd_hda_codec_hdmi     53248  1
videodev              176128  4 uvcvideo,v4l2_common,videobuf2_core,videobuf2_v4l2
snd_hda_codec_realtek    86016  1
x86_pkg_temp_thermal    16384  0
intel_powerclamp       16384  0
snd_hda_codec_generic    77824  1 snd_hda_codec_realtek
snd_hda_intel          40960  3
coretemp               16384  0
media                  24576  2 uvcvideo,videodev
kvm_intel             172032  0
kvm                   540672  1 kvm_intel
snd_hda_codec         135168  4 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel
irqbypass              16384  1 kvm
snd_hda_core           73728  5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
snd_hwdep              16384  1 snd_hda_codec
snd_pcm               106496  4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_core
btusb                  45056  0
btrtl                  16384  1 btusb
btbcm                  16384  1 btusb
crct10dif_pclmul       16384  0
samsung_laptop         20480  0
snd_seq_midi           16384  0
btintel                16384  1 btusb
snd_seq_midi_event     16384  1 snd_seq_midi
snd_rawmidi            32768  1 snd_seq_midi
iwlwifi               200704  1 iwldvm
crc32_pclmul           16384  0
snd_seq                69632  2 snd_seq_midi_event,snd_seq_midi
aesni_intel           167936  6
aes_x86_64             20480  1 aesni_intel
lrw                    16384  1 aesni_intel
gf128mul               16384  1 lrw
joydev                 20480  0
glue_helper            16384  1 aesni_intel
ablk_helper            16384  1 aesni_intel
snd_seq_device         16384  3 snd_seq,snd_rawmidi,snd_seq_midi
input_leds             16384  0
cryptd                 20480  2 aesni_intel,ablk_helper
serio_raw              16384  0
snd_timer              32768  2 snd_pcm,snd_seq
snd                    81920  17 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,snd_seq_device
soundcore              16384  1 snd
bluetooth             520192  9 bnep,btbcm,btrtl,btusb,btintel
cfg80211              565248  3 iwlwifi,mac80211,iwldvm
mei_me                 36864  0
mei                    98304  1 mei_me
wmi                    20480  0
lpc_ich                24576  0
shpchp                 36864  0
binfmt_misc            20480  1
mac_hid                16384  0
parport_pc             32768  0
ppdev                  20480  0
lp                     20480  0
parport                49152  3 lp,ppdev,parport_pc
autofs4                40960  2
hid_generic            16384  0
usbhid                 49152  0
hid                   118784  2 hid_generic,usbhid
i915                 1208320  4
psmouse               126976  0
i2c_algo_bit           16384  1 i915
drm_kms_helper        155648  1 i915
syscopyarea            16384  1 drm_kms_helper
sysfillrect            16384  1 drm_kms_helper
sysimgblt              16384  1 drm_kms_helper
fb_sys_fops            16384  1 drm_kms_helper
ahci                   36864  3
drm                   364544  6 i915,drm_kms_helper
libahci                32768  1 ahci
r8169                  81920  0
mii                    16384  1 r8169
video                  40960  2 i915,samsung_laptop
fjes                   28672  0


Kod Seç Genişlet

mega@ubi:~$ dmesg
[    0.000000] microcode: CPU0 microcode updated early to revision 0x29, date = 2013-06-12
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-40-generic (buildd@lcy01-26) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.2) ) #60-Ubuntu SMP Fri Sep 23 16:45:45 UTC 2016 (Ubuntu 4.4.0-40.60-generic 4.4.21)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-40-generic root=UUID=acef0bdd-d71c-4d4e-96aa-ba7a3b1d046e ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] Disabled fast string operations
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000aabeefff] usable
[    0.000000] BIOS-e820: [mem 0x00000000aabef000-0x00000000aaeeefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000aaeef000-0x00000000aaf9efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000aaf9f000-0x00000000aaffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000aafff000-0x00000000aaffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ab000000-0x00000000af9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001cfdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 300E4A/300E5A/300E7A/3430EA/3530EA/300E4A/300E5A/300E7A/3430EA/3530EA, BIOS 09QA 11/02/2012
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x1cfe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 080000000 mask FC0000000 write-back
[    0.000000]   3 base 0B0000000 mask FF0000000 uncachable
[    0.000000]   4 base 0AC000000 mask FFC000000 uncachable
[    0.000000]   5 base 0AB000000 mask FFF000000 uncachable
[    0.000000]   6 base 100000000 mask F80000000 write-back
[    0.000000]   7 base 180000000 mask FC0000000 write-back
[    0.000000]   8 base 1C0000000 mask FE0000000 write-back
[    0.000000]   9 base 1D0000000 mask FF0000000 uncachable
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT 
[    0.000000] e820: last_pfn = 0xab000 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] BRK [0x02201000, 0x02201fff] PGTABLE
[    0.000000] BRK [0x02202000, 0x02202fff] PGTABLE
[    0.000000] BRK [0x02203000, 0x02203fff] PGTABLE
[    0.000000] BRK [0x02204000, 0x02204fff] PGTABLE
[    0.000000] BRK [0x02205000, 0x02205fff] PGTABLE
[    0.000000] BRK [0x02206000, 0x02206fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x32bf6000-0x355f2fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F00E0 000024 (v02 SECCSD)
[    0.000000] ACPI: XSDT 0x00000000AAFFE120 000094 (v01 SECCSD LH43STAR 00000002 PTEC 00000002)
[    0.000000] ACPI: FACP 0x00000000AAFF0000 0000F4 (v03 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: DSDT 0x00000000AAFF3000 007FE3 (v02 SECCSD SNB-CPT  00000000 INTL 20061109)
[    0.000000] ACPI: FACS 0x00000000AAF3D000 000040
[    0.000000] ACPI: FACS 0x00000000AAF3D000 000040
[    0.000000] ACPI: SLIC 0x00000000AAFFD000 000176 (v01 SECCSD LH43STAR 00000002 PTEC 00000001)
[    0.000000] ACPI: SSDT 0x00000000AAFFB000 001068 (v01 SECCSD PtidDevc 00001000 INTL 20061109)
[    0.000000] ACPI: ASF! 0x00000000AAFF2000 0000A5 (v32 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: HPET 0x00000000AAFEF000 000038 (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: APIC 0x00000000AAFEE000 000098 (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: MCFG 0x00000000AAFED000 00003C (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: SSDT 0x00000000AAFEC000 0007C2 (v01 PmRef  Cpu0Ist  00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000AAFEB000 000996 (v01 PmRef  CpuPm    00003000 INTL 20061109)
[    0.000000] ACPI: UEFI 0x00000000AAFEA000 00003E (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: UEFI 0x00000000AAFE9000 000042 (v01 PTL    COMBUF   00000001 PTL  00000001)
[    0.000000] ACPI: SSDT 0x00000000AAFE8000 000DB1 (v01 SgRef  SgTabl   00001000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000AAFE7000 00072C (v01 NvORef NvOptTbl 00001000 INTL 20061109)
[    0.000000] ACPI: UEFI 0x00000000AAFE6000 000256 (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000001cfdfffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x1cfdf6000-0x1cfdfafff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x00000001cfdfffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000aabeefff]
[    0.000000]   node   0: [mem 0x00000000aafff000-0x00000000aaffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x00000001cfdfffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001cfdfffff]
[    0.000000] On node 0 totalpages: 1550732
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 156 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 10864 pages used for memmap
[    0.000000]   DMA32 zone: 695280 pages, LIFO batch:31
[    0.000000]   Normal zone: 13304 pages used for memmap
[    0.000000]   Normal zone: 851456 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0xaba00000-0xaf9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xaabef000-0xaaeeefff]
[    0.000000] PM: Registered nosave memory: [mem 0xaaeef000-0xaaf9efff]
[    0.000000] PM: Registered nosave memory: [mem 0xaaf9f000-0xaaffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xab000000-0xaf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xafa00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
[    0.000000] e820: [mem 0xafa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff8801cfa00000 s98008 r8192 d28968 u262144
[    0.000000] pcpu-alloc: s98008 r8192 d28968 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1526344
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-40-generic root=UUID=acef0bdd-d71c-4d4e-96aa-ba7a3b1d046e ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 5975128K/6202928K available (8408K kernel code, 1283K rwdata, 3944K rodata, 1480K init, 1292K bss, 227800K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] Build-time adjustment of leaf fanout to 64.
[    0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[    0.000000] NR_IRQS:16640 nr_irqs:488 16
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2494.470 MHz processor
[    0.000035] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.94 BogoMIPS (lpj=9977880)
[    0.000037] pid_max: default: 32768 minimum: 301
[    0.000043] ACPI: Core revision 20150930
[    0.006863] ACPI: 6 ACPI AML tables successfully acquired and loaded
[    0.006883] Security Framework initialized
[    0.006885] Yama: becoming mindful.
[    0.006900] AppArmor: AppArmor initialized
[    0.007397] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.008983] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.009668] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.009678] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.009877] Initializing cgroup subsys io
[    0.009881] Initializing cgroup subsys memory
[    0.009887] Initializing cgroup subsys devices
[    0.009889] Initializing cgroup subsys freezer
[    0.009891] Initializing cgroup subsys net_cls
[    0.009893] Initializing cgroup subsys perf_event
[    0.009895] Initializing cgroup subsys net_prio
[    0.009898] Initializing cgroup subsys hugetlb
[    0.009900] Initializing cgroup subsys pids
[    0.009920] Disabled fast string operations
[    0.009922] CPU: Physical Processor ID: 0
[    0.009923] CPU: Processor Core ID: 0
[    0.009928] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.009929] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.009931] mce: CPU supports 7 MCE banks
[    0.009942] CPU0: Thermal monitoring enabled (TM1)
[    0.009949] process: using mwait in idle threads
[    0.009952] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.009953] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.010345] Freeing SMP alternatives memory: 32K (ffffffff820b4000 - ffffffff820bc000)
[    0.013766] ftrace: allocating 32005 entries in 126 pages
[    0.028063] smpboot: Max logical packages: 4
[    0.028067] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.028139] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.028593] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.068281] TSC deadline timer enabled
[    0.068284] smpboot: CPU0: Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.068302] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[    0.068322] ... version:                3
[    0.068323] ... bit width:              48
[    0.068323] ... generic registers:      4
[    0.068324] ... value mask:             0000ffffffffffff
[    0.068325] ... max period:             0000ffffffffffff
[    0.068326] ... fixed-purpose events:   3
[    0.068327] ... event mask:             000000070000000f
[    0.069103] x86: Booting SMP configuration:
[    0.069104] .... node  #0, CPUs:      #1
[    0.069369] Disabled fast string operations
[    0.071557] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.071642]  #2
[    0.072191] microcode: CPU2 microcode updated early to revision 0x29, date = 2013-06-12
[    0.072211] Disabled fast string operations
[    0.074354]  #3
[    0.074600] Disabled fast string operations
[    0.076660] x86: Booted up 1 node, 4 CPUs
[    0.076663] smpboot: Total of 4 processors activated (19955.76 BogoMIPS)
[    0.079796] devtmpfs: initialized
[    0.082204] evm: security.selinux
[    0.082205] evm: security.SMACK64
[    0.082206] evm: security.SMACK64EXEC
[    0.082207] evm: security.SMACK64TRANSMUTE
[    0.082208] evm: security.SMACK64MMAP
[    0.082208] evm: security.ima
[    0.082209] evm: security.capability
[    0.082271] PM: Registering ACPI NVS region [mem 0xaaeef000-0xaaf9efff] (720896 bytes)
[    0.082357] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.082443] pinctrl core: initialized pinctrl subsystem
[    0.082551] RTC time:  8:32:46, date: 10/04/16
[    0.082654] NET: Registered protocol family 16
[    0.091653] cpuidle: using governor ladder
[    0.103646] cpuidle: using governor menu
[    0.103659] PCCT header not found.
[    0.103818] ACPI: bus type PCI registered
[    0.103820] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.103904] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.103906] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.103911] PCI: Using configuration type 1 for base access
[    0.103947] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.120094] ACPI: Added _OSI(Module Device)
[    0.120095] ACPI: Added _OSI(Processor Device)
[    0.120096] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.120098] ACPI: Added _OSI(Processor Aggregator Device)
[    0.122315] ACPI: Executed 1 blocks of module-level executable AML code
[    0.124244] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.125080] ACPI: Dynamic OEM Table Load:
[    0.125088] ACPI: SSDT 0xFFFF8801C7D72000 000670 (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
[    0.125546] ACPI: Dynamic OEM Table Load:
[    0.125552] ACPI: SSDT 0xFFFF8801C7D6C800 000303 (v01 PmRef  ApIst    00003000 INTL 20061109)
[    0.125943] ACPI: Dynamic OEM Table Load:
[    0.125947] ACPI: SSDT 0xFFFF8801C7D7A200 000119 (v01 PmRef  ApCst    00003000 INTL 20061109)
[    0.126718] ACPI : EC: EC started
[    0.128896] ACPI: Interpreter enabled
[    0.128906] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[    0.128918] ACPI: (supports S0 S1 S3 S4 S5)
[    0.128920] ACPI: Using IOAPIC for interrupt routing
[    0.128943] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.135090] ACPI: Power Resource [FN00] (off)
[    0.135172] ACPI: Power Resource [FN01] (off)
[    0.135249] ACPI: Power Resource [FN02] (off)
[    0.135325] ACPI: Power Resource [FN03] (off)
[    0.135401] ACPI: Power Resource [FN04] (off)
[    0.135941] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.135946] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.136094] \_SB_.PCI0:_OSC invalid UUID
[    0.136095] _OSC request data:1 1f 0
[    0.136099] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.136502] PCI host bridge to bus 0000:00
[    0.136504] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.136506] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.136508] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.136509] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff window]
[    0.136511] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.136513] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.136520] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.136604] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.136635] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.136669] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.136711] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
[    0.136723] pci 0000:00:02.0: reg 0x10: [mem 0xe1000000-0xe13fffff 64bit]
[    0.136728] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.136732] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    0.136844] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.136876] pci 0000:00:16.0: reg 0x10: [mem 0xe1605000-0xe160500f 64bit]
[    0.136940] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.137020] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.137048] pci 0000:00:1a.0: reg 0x10: [mem 0xe160a000-0xe160a3ff]
[    0.137122] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.137171] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.137213] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.137240] pci 0000:00:1b.0: reg 0x10: [mem 0xe1600000-0xe1603fff 64bit]
[    0.137303] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.137344] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.137383] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.137458] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.137498] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.137538] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    0.137614] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.137653] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.137697] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.137725] pci 0000:00:1d.0: reg 0x10: [mem 0xe1609000-0xe16093ff]
[    0.137799] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.137847] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.137887] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[    0.138054] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    0.138079] pci 0000:00:1f.2: reg 0x10: [io  0x4088-0x408f]
[    0.138087] pci 0000:00:1f.2: reg 0x14: [io  0x4094-0x4097]
[    0.138094] pci 0000:00:1f.2: reg 0x18: [io  0x4080-0x4087]
[    0.138102] pci 0000:00:1f.2: reg 0x1c: [io  0x4090-0x4093]
[    0.138110] pci 0000:00:1f.2: reg 0x20: [io  0x4060-0x407f]
[    0.138118] pci 0000:00:1f.2: reg 0x24: [mem 0xe1608000-0xe16087ff]
[    0.138150] pci 0000:00:1f.2: PME# supported from D3hot
[    0.138218] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.138235] pci 0000:00:1f.3: reg 0x10: [mem 0xe1604000-0xe16040ff 64bit]
[    0.138256] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
[    0.138375] pci 0000:01:00.0: [10de:1051] type 00 class 0x030200
[    0.138394] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xe0ffffff]
[    0.138404] pci 0000:01:00.0: reg 0x14: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.138413] pci 0000:01:00.0: reg 0x1c: [mem 0xc0000000-0xc1ffffff 64bit pref]
[    0.138420] pci 0000:01:00.0: reg 0x24: [io  0x3000-0x307f]
[    0.138426] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[    0.138512] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.143722] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.143730] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.143736] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe0ffffff]
[    0.143745] pci 0000:00:01.0:   bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
[    0.144007] pci 0000:02:00.0: [8086:0896] type 00 class 0x028000
[    0.144286] pci 0000:02:00.0: reg 0x10: [mem 0xe1500000-0xe1501fff 64bit]
[    0.144898] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.145048] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.151856] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.151862] pci 0000:00:1c.0:   bridge window [mem 0xe1500000-0xe15fffff]
[    0.151993] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.152161] pci 0000:03:00.0: reg 0x10: [io  0x2000-0x20ff]
[    0.152275] pci 0000:03:00.0: reg 0x18: [mem 0xe1404000-0xe1404fff 64bit pref]
[    0.152344] pci 0000:03:00.0: reg 0x20: [mem 0xe1400000-0xe1403fff 64bit pref]
[    0.152629] pci 0000:03:00.0: supports D1 D2
[    0.152630] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.152769] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.159783] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.159793] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.159811] pci 0000:00:1c.3:   bridge window [mem 0xe1400000-0xe14fffff 64bit pref]
[    0.160568] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.160616] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.160663] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.160709] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 10 11 12 14 15)
[    0.160754] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 10 11 12 14 15)
[    0.160799] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.160845] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.160890] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.161429] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.161483] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.161619] ACPI : EC: 0 stale EC events cleared
[    0.161774] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.161776] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.161778] vgaarb: loaded
[    0.161779] vgaarb: bridge control possible 0000:00:02.0
[    0.161993] SCSI subsystem initialized
[    0.162039] libata version 3.00 loaded.
[    0.162061] ACPI: bus type USB registered
[    0.162079] usbcore: registered new interface driver usbfs
[    0.162087] usbcore: registered new interface driver hub
[    0.162104] usbcore: registered new device driver usb
[    0.162244] PCI: Using ACPI for IRQ routing
[    0.163759] PCI: pci_cache_line_size set to 64 bytes
[    0.163847] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.163849] e820: reserve RAM buffer [mem 0xaabef000-0xabffffff]
[    0.163850] e820: reserve RAM buffer [mem 0xab000000-0xabffffff]
[    0.163851] e820: reserve RAM buffer [mem 0x1cfe00000-0x1cfffffff]
[    0.163966] NetLabel: Initializing
[    0.163967] NetLabel:  domain hash size = 128
[    0.163968] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.163978] NetLabel:  unlabeled traffic allowed by default
[    0.164051] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.164055] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.166066] amd_nb: Cannot enumerate AMD northbridges
[    0.166082] clocksource: Switched to clocksource hpet
[    0.171612] AppArmor: AppArmor Filesystem Enabled
[    0.171683] pnp: PnP ACPI init
[    0.172825] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.172828] system 00:00: [io  0x1000-0x100f] has been reserved
[    0.172830] system 00:00: [io  0x5000-0x5003] has been reserved
[    0.172831] system 00:00: [io  0xffff] has been reserved
[    0.172833] system 00:00: [io  0x0400-0x0453] could not be reserved
[    0.172835] system 00:00: [io  0x0458-0x047f] has been reserved
[    0.172836] system 00:00: [io  0x0500-0x057f] has been reserved
[    0.172838] system 00:00: [io  0x0a00-0x0a0f] has been reserved
[    0.172839] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.172841] system 00:00: [io  0x5000-0x500f] could not be reserved
[    0.172845] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.172871] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.172921] system 00:02: [io  0x0454-0x0457] has been reserved
[    0.172923] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.172954] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.173005] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.173136] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.173137] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.173139] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.173141] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.173142] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.173144] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.173145] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.173147] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.173149] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[    0.173150] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.173153] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.173595] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.173614] pnp: PnP ACPI: found 7 devices
[    0.180109] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.180117] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[    0.180144] pci 0000:01:00.0: BAR 6: no space for [mem size 0x00080000 pref]
[    0.180146] pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00080000 pref]
[    0.180148] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.180150] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.180153] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe0ffffff]
[    0.180155] pci 0000:00:01.0:   bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
[    0.180158] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.180163] pci 0000:00:1c.0:   bridge window [mem 0xe1500000-0xe15fffff]
[    0.180172] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.180175] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.180182] pci 0000:00:1c.3:   bridge window [mem 0xe1400000-0xe14fffff 64bit pref]
[    0.180189] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.180191] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.180193] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.180194] pci_bus 0000:00: resource 7 [mem 0xafa00000-0xfeafffff window]
[    0.180196] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window]
[    0.180197] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.180198] pci_bus 0000:01: resource 1 [mem 0xe0000000-0xe0ffffff]
[    0.180200] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xc1ffffff 64bit pref]
[    0.180202] pci_bus 0000:02: resource 1 [mem 0xe1500000-0xe15fffff]
[    0.180203] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.180205] pci_bus 0000:03: resource 2 [mem 0xe1400000-0xe14fffff 64bit pref]
[    0.180236] NET: Registered protocol family 2
[    0.180398] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.180531] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.180653] TCP: Hash tables configured (established 65536 bind 65536)
[    0.180685] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.180712] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.180780] NET: Registered protocol family 1
[    0.180797] pci 0000:00:02.0: Video device with shadowed ROM
[    0.181133] PCI: CLS 64 bytes, default 64
[    0.181184] Trying to unpack rootfs image as initramfs...
[    0.816318] Freeing initrd memory: 42996K (ffff880032bf6000 - ffff8800355f3000)
[    0.816327] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.816330] software IO TLB [mem 0xa6bef000-0xaabef000] (64MB) mapped at [ffff8800a6bef000-ffff8800aabeefff]
[    0.816399] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    0.816400] hw unit of domain pp0-core 2^-16 Joules
[    0.816401] hw unit of domain package 2^-16 Joules
[    0.816402] hw unit of domain pp1-gpu 2^-16 Joules
[    0.816502] Scanning for low memory corruption every 60 seconds
[    0.816896] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.816934] audit: initializing netlink subsys (disabled)
[    0.816951] audit: type=2000 audit(1475569966.812:1): initialized
[    0.817329] Initialise system trusted keyring
[    0.817436] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.818942] zbud: loaded
[    0.819128] VFS: Disk quotas dquot_6.6.0
[    0.819160] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.819418] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.819648] fuse init (API version 7.23)
[    0.819779] Key type big_key registered
[    0.819805] Allocating IMA MOK and blacklist keyrings.
[    0.820169] Key type asymmetric registered
[    0.820172] Asymmetric key parser 'x509' registered
[    0.820206] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.820237] io scheduler noop registered
[    0.820240] io scheduler deadline registered (default)
[    0.820268] io scheduler cfq registered
[    0.820693] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.820701] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.820729] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    0.820730] vesafb: scrolling: redraw
[    0.820732] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.820744] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90001000000, using 3072k, total 3072k
[    0.820825] Console: switching to colour frame buffer device 128x48
[    0.820838] fb0: VESA VGA frame buffer device
[    0.820854] intel_idle: MWAIT substates: 0x21120
[    0.820855] intel_idle: v0.4.1 model 0x2A
[    0.820856] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.821247] ACPI: AC Adapter [ADP1] (off-line)
[    0.821306] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.821319] ACPI: Lid Switch [LID0]
[    0.821354] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.821357] ACPI: Power Button [PWRB]
[    0.821391] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.821393] ACPI: Power Button [PWRF]
[    0.822752] thermal LNXTHERM:00: registered as thermal_zone0
[    0.822754] ACPI: Thermal Zone [TZ00] (56 C)
[    0.822936] thermal LNXTHERM:01: registered as thermal_zone1
[    0.822938] ACPI: Thermal Zone [TZ01] (30 C)
[    0.822974] GHES: HEST is not enabled!
[    0.823078] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.826065] Linux agpgart interface v0.103
[    0.827822] ACPI: Battery Slot [BAT1] (battery present)
[    0.829168] brd: module loaded
[    0.830351] loop: module loaded
[    0.830567] libphy: Fixed MDIO Bus: probed
[    0.830570] tun: Universal TUN/TAP device driver, 1.6
[    0.830571] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.830614] PPP generic driver version 2.4.2
[    0.830671] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.830675] ehci-pci: EHCI PCI platform driver
[    0.830784] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.830790] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.830803] ehci-pci 0000:00:1a.0: debug port 2
[    0.834691] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.834704] ehci-pci 0000:00:1a.0: irq 16, io mem 0xe160a000
[    0.846065] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.846107] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.846109] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.846111] usb usb1: Product: EHCI Host Controller
[    0.846112] usb usb1: Manufacturer: Linux 4.4.0-40-generic ehci_hcd
[    0.846113] usb usb1: SerialNumber: 0000:00:1a.0
[    0.846254] hub 1-0:1.0: USB hub found
[    0.846260] hub 1-0:1.0: 2 ports detected
[    0.846427] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.846432] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.846442] ehci-pci 0000:00:1d.0: debug port 2
[    0.850346] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.850354] ehci-pci 0000:00:1d.0: irq 23, io mem 0xe1609000
[    0.862057] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.862093] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.862095] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.862096] usb usb2: Product: EHCI Host Controller
[    0.862097] usb usb2: Manufacturer: Linux 4.4.0-40-generic ehci_hcd
[    0.862099] usb usb2: SerialNumber: 0000:00:1d.0
[    0.862229] hub 2-0:1.0: USB hub found
[    0.862234] hub 2-0:1.0: 2 ports detected
[    0.862319] ehci-platform: EHCI generic platform driver
[    0.862332] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.862337] ohci-pci: OHCI PCI platform driver
[    0.862346] ohci-platform: OHCI generic platform driver
[    0.862355] uhci_hcd: USB Universal Host Controller Interface driver
[    0.862412] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:SPAD] at 0x60,0x64 irq 1,12
[    0.865823] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.865827] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.865983] mousedev: PS/2 mouse device common for all mice
[    0.866348] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.866375] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.866382] i2c /dev entries driver
[    0.866432] device-mapper: uevent: version 1.0.3
[    0.866504] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    0.866524] Intel P-state driver initializing.
[    0.866838] ledtrig-cpu: registered to indicate activity on CPUs
[    0.867926] NET: Registered protocol family 10
[    0.868405] NET: Registered protocol family 17
[    0.868438] Key type dns_resolver registered
[    0.869072] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
[    0.869091] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x29
[    0.869126] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x29
[    0.869149] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
[    0.869322] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.869788] registered taskstats version 1
[    0.869831] Loading compiled-in X.509 certificates
[    0.872737] Loaded X.509 cert 'Build time autogenerated kernel key: 5e3522fb4a48866371fcd07079f93d0f7b144466'
[    0.872804] zswap: loaded using pool lzo/zbud
[    0.875874] Key type trusted registered
[    0.880579] Key type encrypted registered
[    0.880586] AppArmor: AppArmor sha1 policy hashing enabled
[    0.880589] ima: No TPM chip found, activating TPM-bypass!
[    0.880605] evm: HMAC attrs: 0x1
[    0.880935]   Magic number: 4:648:522
[    0.881033] rtc_cmos 00:01: setting system clock to 2016-10-04 08:32:47 UTC (1475569967)
[    0.881094] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.881095] EDD information not available.
[    0.881154] PM: Hibernation image not present or could not be loaded.
[    0.882314] Freeing unused kernel memory: 1480K (ffffffff81f42000 - ffffffff820b4000)
[    0.882316] Write protecting the kernel read-only data: 14336k
[    0.882817] Freeing unused kernel memory: 1820K (ffff880001839000 - ffff880001a00000)
[    0.883148] Freeing unused kernel memory: 152K (ffff880001dda000 - ffff880001e00000)
[    0.892031] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    0.892091] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    0.892103] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    0.892485] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    0.892528] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    0.892740] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    0.892786] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    0.892832] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    0.892873] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    0.892918] random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    0.900387] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.916212] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    0.929190] nvidia: module license 'NVIDIA' taints kernel.
[    0.929194] Disabling lock debugging due to kernel taint
[    0.931672] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.931692] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    0.932522] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000c6a000, e8:03:9a:9d:d1:f6, XID 0c900800 IRQ 25
[    0.932527] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    0.934622] [drm] Initialized drm 1.1.0 20060810
[    0.934804] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[    0.935354] ahci 0000:00:1f.2: version 3.0
[    0.935569] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    0.939939] nvidia-nvlink: Nvlink Core is being initialized, major device number 248
[    0.939952] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  367.44  Wed Aug 17 22:24:07 PDT 2016
[    0.950090] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x1d impl SATA mode
[    0.950095] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[    0.956882] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  367.44  Wed Aug 17 21:54:40 PDT 2016
[    0.957540] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[    0.976860] r8169 0000:03:00.0 enp3s0: renamed from eth0
[    0.979000] scsi host0: ahci
[    0.979127] scsi host1: ahci
[    0.979233] scsi host2: ahci
[    0.979345] scsi host3: ahci
[    0.979452] scsi host4: ahci
[    0.979556] scsi host5: ahci
[    0.979627] ata1: SATA max UDMA/133 abar m2048@0xe1608000 port 0xe1608100 irq 26
[    0.979629] ata2: DUMMY
[    0.979633] ata3: SATA max UDMA/133 abar m2048@0xe1608000 port 0xe1608200 irq 26
[    0.979636] ata4: SATA max UDMA/133 abar m2048@0xe1608000 port 0xe1608280 irq 26
[    0.979639] ata5: SATA max UDMA/133 abar m2048@0xe1608000 port 0xe1608300 irq 26
[    0.979640] ata6: DUMMY
[    0.980486] [drm] Memory usable by graphics device = 2048M
[    0.980489] checking generic (d0000000 300000) vs hw (d0000000 10000000)
[    0.980490] fb: switching to inteldrmfb from VESA VGA
[    0.980513] Console: switching to colour dummy device 80x25
[    0.980587] [drm] Replacing VGA console driver
[    0.986117] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    0.986119] [drm] Driver supports precise vblank timestamp query.
[    1.158149] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.178147] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.270839] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[    1.271242] fbcon: inteldrmfb (fb0) is primary device
[    1.271326] Console: switching to colour frame buffer device 170x48
[    1.271350] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    1.271745] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[    1.271866] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2b/LNXVIDEO:00/input/input6
[    1.272690] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.272768] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input7
[    1.272823] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 1
[    1.291031] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.291034] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.291289] hub 1-1:1.0: USB hub found
[    1.291360] hub 1-1:1.0: 6 ports detected
[    1.302123] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.308410] ata1.00: ATA-8: ST500LM012 HN-M500MBB, 2AR10002, max UDMA/133
[    1.308420] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.310549] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.310559] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.310906] hub 2-1:1.0: USB hub found
[    1.310992] hub 2-1:1.0: 6 ports detected
[    1.314521] ata1.00: configured for UDMA/133
[    1.314881] scsi 0:0:0:0: Direct-Access     ATA      ST500LM012 HN-M5 0002 PQ: 0 ANSI: 5
[    1.315081] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.315084] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.315118] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.315119] sd 0:0:0:0: [sda] Write Protect is off
[    1.315121] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.315138] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.412569]  sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[    1.413207] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.562028] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
[    1.582073] usb 2-1.1: new full-speed USB device number 3 using ehci-pci
[    1.638222] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.644860] ata3.00: ATAPI: TSSTcorp CDDVDW SN-208BB, SC00, max UDMA/100
[    1.647140] ata3.00: configured for UDMA/100
[    1.649990] scsi 2:0:0:0: CD-ROM            TSSTcorp CDDVDW SN-208BB  SC00 PQ: 0 ANSI: 5
[    1.673923] usb 1-1.4: New USB device found, idVendor=0ac8, idProduct=c349
[    1.673926] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.673928] usb 1-1.4: Product: WebCam SC-03FFL11739P
[    1.673929] usb 1-1.4: Manufacturer: Vimicro Corp.
[    1.675945] usb 2-1.1: New USB device found, idVendor=09da, idProduct=054f
[    1.675949] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.675951] usb 2-1.1: Product: USB Device
[    1.675960] usb 2-1.1: Manufacturer: A4TECH
[    1.679218] hidraw: raw HID events driver (C) Jiri Kosina
[    1.680074] sr 2:0:0:0: [sr0] scsi3-mmc drive: 16x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.680078] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.680229] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    1.680317] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    1.683652] usbcore: registered new interface driver usbhid
[    1.683654] usbhid: USB HID core driver
[    1.685202] input: A4TECH USB Device as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:09DA:054F.0001/input/input8
[    1.738393] hid-generic 0003:09DA:054F.0001: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:1d.0-1.1/input0
[    1.738538] input: A4TECH USB Device as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:09DA:054F.0002/input/input9
[    1.738890] hid-generic 0003:09DA:054F.0002: input,hidraw1: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:1d.0-1.1/input1
[    1.750102] usb 2-1.3: new full-speed USB device number 4 using ehci-pci
[    1.814077] tsc: Refined TSC clocksource calibration: 2494.337 MHz
[    1.814092] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f4544ecb4, max_idle_ns: 440795257849 ns
[    1.847057] usb 2-1.3: New USB device found, idVendor=8086, idProduct=0189
[    1.847067] usb 2-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.849971] psmouse serio1: synaptics: queried max coordinates: x [..5738], y [..4886]
[    1.885796] psmouse serio1: synaptics: queried min coordinates: x [1210..], y [986..]
[    1.953131] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00133/0x240000/0xa2400/0x0, board id: 1874, fw id: 1066450
[    1.996237] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[    1.998077] ata4: SATA link down (SStatus 0 SControl 300)
[    2.318094] ata5: SATA link down (SStatus 0 SControl 300)
[    2.814076] clocksource: Switched to clocksource tsc
[    3.950618] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[    4.769150] random: nonblocking pool is initialized
[    5.972605] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    5.972711] systemd[1]: Detected architecture x86-64.
[    5.983538] systemd[1]: Set hostname to <ubi>.
[    8.007558] systemd[1]: Listening on Journal Socket (/dev/log).
[    8.007619] systemd[1]: Listening on udev Kernel Socket.
[    8.007645] systemd[1]: Listening on udev Control Socket.
[    8.007664] systemd[1]: Listening on Syslog Socket.
[    8.007672] systemd[1]: Reached target User and Group Name Lookups.
[    8.007721] systemd[1]: Listening on Journal Audit Socket.
[    8.007731] systemd[1]: Reached target Remote File Systems (Pre).
[    8.007737] systemd[1]: Reached target Remote File Systems.
[    8.007815] systemd[1]: Created slice System Slice.
[    8.007867] systemd[1]: Created slice User and Session Slice.
[    8.007897] systemd[1]: Listening on Journal Socket.
[    8.017909] systemd[1]: Mounting POSIX Message Queue File System...
[    8.018314] systemd[1]: Started Read required files in advance.
[    8.018908] systemd[1]: Starting Journal Service...
[    8.019412] systemd[1]: Mounting Huge Pages File System...
[    8.019813] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    8.169986] systemd[1]: Starting Load Kernel Modules...
[    8.170434] systemd[1]: Mounting Debug File System...
[    8.170802] systemd[1]: Started Braille Device Support.
[    8.171004] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    8.171080] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    8.171125] systemd[1]: Listening on fsck to fsckd communication Socket.
[    8.171143] systemd[1]: Reached target Slices.
[    8.171162] systemd[1]: Reached target Encrypted Volumes.
[    8.171706] systemd[1]: Starting Uncomplicated firewall...
[    8.172269] systemd[1]: Starting Set console keymap...
[    8.172470] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    8.739387] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    8.754010] systemd[1]: Starting Create Static Device Nodes in /dev...
[    8.890731] systemd[1]: Started Uncomplicated firewall.
[    8.951191] systemd[1]: Mounted POSIX Message Queue File System.
[    8.951272] systemd[1]: Mounted Debug File System.
[    8.951321] systemd[1]: Mounted Huge Pages File System.
[    9.004315] lp: driver loaded but no devices found
[    9.045650] systemd[1]: Started Journal Service.
[    9.194420] ppdev: user-space parallel port driver
[   13.431842] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
[   13.690984] systemd-journald[289]: Received request to flush runtime journal from PID 1
[   14.489092] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   14.497115] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150930/utaddress-254)
[   14.497123] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.497128] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[   14.497132] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20150930/utaddress-254)
[   14.497136] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.497138] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[   14.497142] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20150930/utaddress-254)
[   14.497146] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.497147] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[   14.497150] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20150930/utaddress-254)
[   14.497153] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.497154] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   14.505869] wmi: Mapper loaded
[   14.910989] Bluetooth: Core ver 2.21
[   14.911004] NET: Registered protocol family 31
[   14.911006] Bluetooth: HCI device and connection manager initialized
[   14.911010] Bluetooth: HCI socket layer initialized
[   14.911013] Bluetooth: L2CAP socket layer initialized
[   14.911019] Bluetooth: SCO socket layer initialized
[   15.448791] AVX version of gcm_enc/dec engaged.
[   15.448793] AES CTR mode by8 optimization enabled
[   15.566411] Intel(R) Wireless WiFi driver for Linux
[   15.566414] Copyright(c) 2003- 2015 Intel Corporation
[   15.566582] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[   15.723844] samsung_laptop: detected SABI interface: SwSmi@
[   15.949550] usbcore: registered new interface driver btusb
[   16.847510] media: Linux media interface: v0.10
[   16.979012] usb 2-1.3: USB disconnect, device number 4
[   17.289702] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[   17.330828] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   17.330831] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   17.330832] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   17.330834] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   17.330835] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   17.330836] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x19
[   17.330838] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   17.355639] Linux video capture interface: v2.00
[   17.456754] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   17.456850] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   17.456944] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   17.749495] intel_rapl: Found RAPL domain package
[   17.749497] intel_rapl: Found RAPL domain core
[   17.749499] intel_rapl: Found RAPL domain uncore
[   17.749503] intel_rapl: RAPL package 0 domain package locked by BIOS
[   18.330912] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[   18.330916] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[   18.330917] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[   18.330919] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N 130 BGN, REV=0xB0
[   18.331029] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[   18.380220] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   18.447284] nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 243
[   18.453424] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[   19.472538] uvcvideo: Found UVC 1.00 device WebCam SC-03FFL11739P (0ac8:c349)
[   19.474295] input: WebCam SC-03FFL11739P as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input13
[   19.474347] usbcore: registered new interface driver uvcvideo
[   19.474348] USB Video Class driver (1.1.1)
[   19.717727] cfg80211: World regulatory domain updated:
[   19.717731] cfg80211:  DFS Master region: unset
[   19.717732] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   19.717734] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   19.717736] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   19.717737] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   19.717738] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   19.717740] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   19.717741] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   19.717742] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   19.717743] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   21.734449] Adding 7533564k swap on /dev/sda6.  Priority:-1 extents:1 across:7533564k FS
[   23.110592] audit: type=1400 audit(1475569989.725:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=730 comm="apparmor_parser"
[   23.110601] audit: type=1400 audit(1475569989.725:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=730 comm="apparmor_parser"
[   23.110606] audit: type=1400 audit(1475569989.725:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=730 comm="apparmor_parser"
[   23.110610] audit: type=1400 audit(1475569989.725:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=730 comm="apparmor_parser"
[   23.209558] audit: type=1400 audit(1475569989.825:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=734 comm="apparmor_parser"
[   23.274527] audit: type=1400 audit(1475569989.889:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=729 comm="apparmor_parser"
[   23.274543] audit: type=1400 audit(1475569989.889:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=729 comm="apparmor_parser"
[   23.334035] audit: type=1400 audit(1475569989.949:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=735 comm="apparmor_parser"
[   23.386977] audit: type=1400 audit(1475569990.001:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=736 comm="apparmor_parser"
[   23.386992] audit: type=1400 audit(1475569990.001:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=736 comm="apparmor_parser"
[   27.336125] bbswitch: version 0.8
[   27.336132] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[   27.336137] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
[   27.336149] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   27.337029] bbswitch: detected an Optimus _DSM function
[   27.337037] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[   27.714199] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   27.714253] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   27.714283] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   27.714310] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   27.714337] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   27.714539] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   27.714566] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   27.749777] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   28.136273] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   28.138165] nvidia-uvm: Unloaded the UVM driver in 8 mode
[   28.157710] [drm] [nvidia-drm] [GPU ID 0x00000100] Unloading driver
[   28.181944] nvidia-modeset: Unloading
[   28.201887] nvidia-nvlink: Unregistered the Nvlink Core, major device number 248
[   28.213489] bbswitch: disabling discrete graphics
[   28.213501] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[   28.228622] pci_raw_set_power_state: 33 callbacks suppressed
[   28.228634] pci 0000:01:00.0: Refused to change power state, currently in D0
[   30.556803] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   30.556806] Bluetooth: BNEP filters: protocol multicast
[   30.556809] Bluetooth: BNEP socket layer initialized
[   36.439688] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   36.439836] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[   36.446186] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[   36.446283] iwlwifi 0000:02:00.0: Radio type=0x2-0x2-0x1
[   36.516932] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[   36.523281] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[   36.523377] iwlwifi 0000:02:00.0: Radio type=0x2-0x2-0x1
[   36.580467] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   36.583163] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   36.830450] r8169 0000:03:00.0 enp3s0: link down
[   36.830506] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   37.473690] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[  259.961786] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[  259.999837] JFS: nTxBlock = 8192, nTxLock = 65536
[  260.023162] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[  260.127100] QNX4 filesystem 0.2.3 registered.
[  260.240242] raid6: sse2x1   gen()  4999 MB/s
[  260.308230] raid6: sse2x1   xor()  5078 MB/s
[  260.376228] raid6: sse2x2   gen()  9817 MB/s
[  260.444223] raid6: sse2x2   xor()  7431 MB/s
[  260.512217] raid6: sse2x4   gen() 11810 MB/s
[  260.580215] raid6: sse2x4   xor()  8816 MB/s
[  260.580217] raid6: using algorithm sse2x4 gen() 11810 MB/s
[  260.580218] raid6: .... xor() 8816 MB/s, rmw enabled
[  260.580219] raid6: using ssse3x2 recovery algorithm
[  260.591475] xor: automatically using best checksumming function:
[  260.628206]    avx       : 20116.000 MB/sec
[  260.694265] Btrfs loaded
[  382.443746] wlp2s0: authenticate with 88:32:9b:60:7a:60
[  382.446756] wlp2s0: send auth to 88:32:9b:60:7a:60 (try 1/3)
[  382.449534] wlp2s0: authenticated
[  382.449738] wlp2s0: associate with 88:32:9b:60:7a:60 (try 1/3)
[  382.453067] wlp2s0: RX AssocResp from 88:32:9b:60:7a:60 (capab=0x411 status=0 aid=1)
[  382.453280] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 2), will use 2
[  382.453285] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 3), will use 2
[  382.455724] wlp2s0: associated
[  382.455776] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 3043.276288] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 3043.276448] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 3043.276547] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 3043.276592] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 3043.277011] pci_bus 0000:02: Allocating resources
[ 3043.277096] pcieport 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[ 3043.277111] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 3043.277132] pci_bus 0000:03: Allocating resources
[ 3043.277161] pcieport 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 400000 add_align 100000
[ 3043.277169] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 3043.277183] pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 3043.277192] pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 3043.277201] pcieport 0000:00:1c.3: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 400000 min_align 100000
[ 3043.277209] pcieport 0000:00:1c.3: res[14]=[mem 0x00100000-0x004fffff] res_to_dev_res add_size 400000 min_align 100000
[ 3043.277218] pcieport 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 3043.277226] pcieport 0000:00:1c.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 3043.277252] pcieport 0000:00:1c.0: BAR 15: assigned [mem 0xafa00000-0xafbfffff 64bit pref]
[ 3043.277264] pcieport 0000:00:1c.3: BAR 14: assigned [mem 0xafc00000-0xafffffff]
[ 3043.277275] pcieport 0000:00:1c.0: BAR 13: assigned [io  0x6000-0x6fff]
[ 3043.277570] pci_bus 0000:01: Allocating resources
[ 3043.277682] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 3043.278005] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 3043.310068] wlp2s0: deauthenticating from 88:32:9b:60:7a:60 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 3043.333139] cfg80211: World regulatory domain updated:
[ 3043.333146] cfg80211:  DFS Master region: unset
[ 3043.333150] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 3043.333155] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 3043.333159] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 3043.333162] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 3043.333166] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 3043.333171] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 3043.333174] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 3043.333177] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 3043.333181] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 3048.818790] PM: Syncing filesystems ... done.
[ 3049.272684] PM: Preparing system for sleep (mem)
[ 3049.273555] bbswitch: enabling discrete graphics
[ 3049.707165] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 3049.709921] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 3049.711288] PM: Suspending system (mem)
[ 3049.711314] Suspending console(s) (use no_console_suspend to debug)
[ 3049.711925] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 3049.712012] sd 0:0:0:0: [sda] Stopping disk
[ 3050.683167] PM: suspend of devices complete after 970.299 msecs
[ 3050.699137] PM: late suspend of devices complete after 15.938 msecs
[ 3050.700773] r8169 0000:03:00.0: System wakeup enabled by ACPI
[ 3050.701167] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 3050.701270] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 3050.715246] PM: noirq suspend of devices complete after 16.080 msecs
[ 3050.715837] ACPI: Preparing to enter system sleep state S3
[ 3050.735218] ACPI : EC: EC stopped
[ 3050.735219] PM: Saving platform NVS memory
[ 3050.735226] Disabling non-boot CPUs ...
[ 3050.735681] Broke affinity for irq 16
[ 3050.735697] Broke affinity for irq 29
[ 3050.736747] smpboot: CPU 1 is now offline
[ 3050.748001] Broke affinity for irq 16
[ 3050.748015] Broke affinity for irq 27
[ 3050.748017] Broke affinity for irq 29
[ 3050.749064] smpboot: CPU 2 is now offline
[ 3050.759987] Broke affinity for irq 1
[ 3050.759998] Broke affinity for irq 9
[ 3050.760004] Broke affinity for irq 12
[ 3050.760010] Broke affinity for irq 16
[ 3050.760016] Broke affinity for irq 23
[ 3050.760021] Broke affinity for irq 26
[ 3050.760024] Broke affinity for irq 27
[ 3050.760026] Broke affinity for irq 29
[ 3050.761080] smpboot: CPU 3 is now offline
[ 3050.777166] ACPI: Low-level resume complete
[ 3050.777209] ACPI : EC: EC started
[ 3050.777209] PM: Restoring platform NVS memory
[ 3050.778102] microcode: CPU0 microcode updated early to revision 0x29, date = 2013-06-12
[ 3050.778120] Enabling non-boot CPUs ...
[ 3050.797196] x86: Booting SMP configuration:
[ 3050.797198] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 3050.797969] Disabled fast string operations
[ 3050.800446]  cache: parent cpu1 should not be sleeping
[ 3050.800626] CPU1 is up
[ 3050.817337] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 3050.818349] microcode: CPU2 microcode updated early to revision 0x29, date = 2013-06-12
[ 3050.818370] Disabled fast string operations
[ 3050.820904]  cache: parent cpu2 should not be sleeping
[ 3050.821084] CPU2 is up
[ 3050.841449] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 3050.842217] Disabled fast string operations
[ 3050.844846]  cache: parent cpu3 should not be sleeping
[ 3050.845025] CPU3 is up
[ 3050.864872] ACPI : EC: 2 stale EC events cleared
[ 3050.864881] ACPI: Waking up from system sleep state S3
[ 3051.405802] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 3051.405852] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 3051.407230] PM: noirq resume of devices complete after 17.464 msecs
[ 3051.407610] PM: early resume of devices complete after 0.356 msecs
[ 3051.408070] r8169 0000:03:00.0: System wakeup disabled by ACPI
[ 3051.408078] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
[ 3051.408786] rtc_cmos 00:01: System wakeup disabled by ACPI
[ 3051.415416] sd 0:0:0:0: [sda] Starting disk
[ 3051.516061] r8169 0000:03:00.0 enp3s0: link down
[ 3051.641870] usb 1-1.4: reset high-speed USB device number 3 using ehci-pci
[ 3051.741991] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3051.745706] PM: resume of devices complete after 337.671 msecs
[ 3051.746195] PM: Finishing wakeup.
[ 3051.746198] Restarting tasks ...
[ 3051.750288] ata3.00: configured for UDMA/100
[ 3051.770247] ata5: SATA link down (SStatus 0 SControl 300)
[ 3051.773688] done.
[ 3051.774109] ata4: SATA link down (SStatus 0 SControl 300)
[ 3051.778959] bbswitch: disabling discrete graphics
[ 3051.778974] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
[ 3052.272259] psmouse serio1: synaptics: queried max coordinates: x [..5738], y [..4886]
[ 3052.306785] psmouse serio1: synaptics: queried min coordinates: x [1210..], y [986..]
[ 3053.219616] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3053.232044] ata1.00: configured for UDMA/133
[ 3053.584936] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 3053.585134] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[ 3053.591746] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[ 3053.591845] iwlwifi 0000:02:00.0: Radio type=0x2-0x2-0x1
[ 3053.660498] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[ 3053.666857] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[ 3053.666953] iwlwifi 0000:02:00.0: Radio type=0x2-0x2-0x1
[ 3053.725499] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 3053.726547] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 3053.830329] r8169 0000:03:00.0 enp3s0: link down
[ 3053.830388] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 3053.872299] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 3054.441721] wlp2s0: authenticate with 88:32:9b:60:7a:60
[ 3054.447925] wlp2s0: send auth to 88:32:9b:60:7a:60 (try 1/3)
[ 3054.450694] wlp2s0: authenticated
[ 3054.452899] wlp2s0: associate with 88:32:9b:60:7a:60 (try 1/3)
[ 3054.462551] wlp2s0: RX AssocResp from 88:32:9b:60:7a:60 (capab=0x411 status=0 aid=1)
[ 3054.462807] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 2), will use 2
[ 3054.462812] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 3), will use 2
[ 3054.464960] wlp2s0: associated
[ 3054.465014] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready


Kod Seç Genişlet

mega@ubi:~$ dmesg | tail
[ 3053.872299] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 3054.441721] wlp2s0: authenticate with 88:32:9b:60:7a:60
[ 3054.447925] wlp2s0: send auth to 88:32:9b:60:7a:60 (try 1/3)
[ 3054.450694] wlp2s0: authenticated
[ 3054.452899] wlp2s0: associate with 88:32:9b:60:7a:60 (try 1/3)
[ 3054.462551] wlp2s0: RX AssocResp from 88:32:9b:60:7a:60 (capab=0x411 status=0 aid=1)
[ 3054.462807] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 2), will use 2
[ 3054.462812] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 3), will use 2
[ 3054.464960] wlp2s0: associated
[ 3054.465014] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready


[ata1]

Kod Seç Genişlet

sudo blkid

Kod Seç Genişlet

systemctl --state=failed

Kod Seç Genişlet

cat /etc/fstab

Şu çıktılarında bize faydası olur. ama çıktınız da süre farklı görünüyor.

mega@ubi:~$ systemd-analyze
Startup finished in 5.376s (kernel) + 30.544s (userspace) = 35.921s

[Nabi]

 Buyrun @ata bey

Kod Seç Genişlet

mega@ubi:~$ sudo blkid
[sudo] password for mega:
/dev/sda6: UUID="8f7eb0c3-a3e3-4827-8385-37c028ee0b4c" TYPE="swap" PARTUUID="0006dd50-06"
/dev/sda1: UUID="6A94AFB394AF7FE5" TYPE="ntfs" PARTUUID="0006dd50-01"
/dev/sda2: UUID="FEDC9B91DC9B4337" TYPE="ntfs" PARTUUID="0006dd50-02"
/dev/sda5: LABEL="Depo" UUID="6D351CD745515B89" TYPE="ntfs" PARTUUID="0006dd50-05"
/dev/sda7: UUID="acef0bdd-d71c-4d4e-96aa-ba7a3b1d046e" TYPE="ext4" PARTUUID="0006dd50-07"


Kod Seç Genişlet

mega@ubi:~$ systemctl --state=failed
  UNIT                        LOAD   ACTIVE SUB    DESCRIPTION
● nvidia-persistenced.service loaded failed failed NVIDIA Persistence Daemon

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.

1 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.


Kod Seç Genişlet

mega@ubi:~$ systemd-analyze
Startup finished in 5.376s (kernel) + 30.544s (userspace) = 35.921s


Kod Seç Genişlet

mega@ubi:~$ systemd-analyze blame
         12.002s dev-sda7.device
         11.268s apparmor.service
         10.503s ModemManager.service
          9.711s snapd.firstboot.service
          7.580s accounts-daemon.service
          6.835s console-setup.service
          6.476s NetworkManager.service
          5.417s grub-common.service
          5.310s apport.service
          4.438s ondemand.service
          4.207s networking.service
          4.039s gpu-manager.service
          4.039s rsyslog.service
          3.887s systemd-logind.service
          3.834s alsa-restore.service
          3.827s pppd-dns.service
          3.801s bluetooth.service
          3.801s avahi-daemon.service
          3.784s systemd-tmpfiles-setup.service
          3.595s lightdm.service
          3.488s colord.service
          3.049s systemd-udevd.service
          3.045s polkitd.service
lines 1-23


Kod Seç Genişlet

mega@ubi:~$ cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda7 during installation
UUID=acef0bdd-d71c-4d4e-96aa-ba7a3b1d046e /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda6 during installation
UUID=8f7eb0c3-a3e3-4827-8385-37c028ee0b4c none            swap    sw              0       0




Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 04 Ekim 2016 - 15:49:12
İletinizin son kısmını  sonradan farkettim. Ordaki süreleri topladığımda yaklaşık 71 saniye çıkıyor. Ama ben kronemetre tutarak bir kaç defa denedim. Genelde 80-85 arası sürüyor

[ata1]

öncelikle bey demeye gerek yok diye düşünüyorum. Soruna gelecek olursak sorun belli çözüm için ubuntu deneyimli arkadaşlar yardımcı olacaktır.
ubuntu da işler farklı bu nedenle ben riske girmek istemiyorum.

Kod Seç Genişlet

mega@ubi:~$ systemctl --state=failed
  UNIT                        LOAD   ACTIVE SUB    DESCRIPTION
● nvidia-persistenced.service loaded failed failed NVIDIA Persistence Daemon

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.

1 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.


siz alt kısıma şu çıktıları ekleyin ki ekran kartı için gerekli bilgileri arkadaşlar görsün.
Ekran Kartı ile İlgili Sorularda Verilmesi Gereken Çıktılar
https://forum.ubuntu-tr.net/index.php?topic=33412.0

[Nabi]

öncelikle bey demeye gerek yok diye düşünüyorum.

Ama @ata hocam derim. uyarı gösterdiğniz kısımda acaba Bumblebee yerine direk nvidia kurduğumdan mı dolayı mı uyarı veriyor acaba Diye düşünüyorum

[ata1]

Sorun ekran kartı ile alakalı fakat işlemler benim kullandığım tabanda farklı o nedenle ubuntuda deneyimli arkadaşlar yardımcı olacaktır.
Ekran Kartı ile İlgili Sorularda Verilmesi Gereken Çıktılar
https://forum.ubuntu-tr.net/index.php?topic=33412.0

not .yaşımdan dolayı saygı olarak algıladım teşekkür erdim

Ama @ata hocam derim

[Nabi]

Kod Seç Genişlet

mega@ubi:~$ lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 16.04.1 LTS
Release: 16.04
Codename: xenial


Kod Seç Genişlet

mega@ubi:~$ lspci -nnk | grep "VGA\|3D\|Display" -A2
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09)
Subsystem: Samsung Electronics Co Ltd 2nd Generation Core Processor Family Integrated Graphics Controller [144d:c606]
Kernel driver in use: i915
--
01:00.0 3D controller [0302]: NVIDIA Corporation GF119M [GeForce GT 520MX] [10de:1051] (rev ff)
Kernel modules: nvidiafb, nouveau, nvidia_367, nvidia_367_drm
02:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 130 [8086:0896] (rev 34)


Kod Seç Genişlet

mega@ubi:~$ glxinfo | grep render
direct rendering: Yes
    GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer,
    GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer,
Extended renderer info (GLX_MESA_query_renderer):
OpenGL renderer string: Mesa DRI Intel(R) Sandybridge Mobile
    GL_ARB_conditional_render_inverted, GL_ARB_copy_buffer, GL_ARB_copy_image,
    GL_NV_conditional_render, GL_NV_depth_clamp, GL_NV_packed_depth_stencil,
    GL_ARB_conditional_render_inverted, GL_ARB_copy_buffer, GL_ARB_copy_image,
    GL_NV_blend_square, GL_NV_conditional_render, GL_NV_depth_clamp,
    GL_OES_element_index_uint, GL_OES_fbo_render_mipmap,



Kod Seç Genişlet

mega@ubi:~$ xrandr
Screen 0: minimum 8 x 8, current 1366 x 768, maximum 32767 x 32767
LVDS1 connected primary 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 193mm
   1366x768      60.06*+
   1360x768      59.80    59.96 
   1280x720      60.00 
   1024x768      60.00 
   1024x576      60.00 
   960x540       60.00 
   800x600       60.32    56.25 
   864x486       60.00 
   640x480       59.94 
   720x405       60.00 
   680x384       60.00 
   640x360       60.00 
DP1 disconnected (normal left inverted right x axis y axis)
HDMI1 disconnected (normal left inverted right x axis y axis)
VGA1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)

Kod Seç Genişlet

mega@ubi:~$ dpkg -l | egrep "nvidia|bumblebee|nvidia-prime|fglrx"
ii  nvidia-361                                    367.44-0ubuntu0.16.04.2                                     amd64        Transitional package for nvidia-367
ii  nvidia-367                                    367.44-0ubuntu0.16.04.2                                     amd64        NVIDIA binary driver - version 367.44
rc  nvidia-opencl-icd-361                         367.44-0ubuntu0.16.04.2                                     amd64        Transitional package for nvidia-opencl-icd-367
ii  nvidia-opencl-icd-367                         367.44-0ubuntu0.16.04.2                                     amd64        NVIDIA OpenCL ICD
ii  nvidia-prime                                  0.8.2                                                       amd64        Tools to enable NVIDIA's Prime
ii  nvidia-settings                               361.42-0ubuntu1                                             amd64        Tool for configuring the NVIDIA graphics driver


not .yaşımdan dolayı saygı olarak algıladım teşekkür erdim

Rica ederim hocam:)