Easier CAP

[metinalim]

Arkadaşlar eski VHS Video playerimden bu resmini gördüğünüz araç sayesinde görüntüleri bilgisayarıma atmak istiyorum fakat beceremedim. bilgisi olan var mı? ubuntu 14.04 kullanıyorum

[eklenti yönetici tarafından silindi]

[plazma]

Marka ve model numarası nedir bu cihazın ?

[nuked]

http://linuxtv.org/wiki/index.php/Easycap

birden fazla modeli mevcut lsusb ve dmesg çıktılarını iletebilirmisiniz.

[metinalim]

Kod Seç Genişlet

lsusb
Bus 002 Device 009: ID 1c88:0007 Somagic, Inc. SMI Grabber (EasyCAP DC60+ clone) (no firmware) [SMI-2021CBE]
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 2635:0601 
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


[br][br][size=1]Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : [time]02 Kasım 2015 - 11:40:49[/time][/size][hr]
[ 2749.188704] Suspending console(s) (use no_console_suspend to debug)
[ 2749.189078] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 2749.189173] sd 0:0:0:0: [sda] Stopping disk
[ 2749.637437] PM: suspend of devices complete after 448.445 msecs
[ 2749.653356] PM: late suspend of devices complete after 15.908 msecs
[ 2749.653807] atl1c 0000:02:00.0: System wakeup enabled by ACPI
[ 2749.653946] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 2749.653985] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 2749.669292] PM: noirq suspend of devices complete after 15.929 msecs
[ 2749.669424] ACPI: Preparing to enter system sleep state S3
[ 2749.877338] PM: Saving platform NVS memory
[ 2749.877767] Disabling non-boot CPUs ...
[ 2749.879088] kvm: disabling virtualization on CPU1
[ 2749.981272] smpboot: CPU 1 is now offline
[ 2749.982900] kvm: disabling virtualization on CPU2
[ 2749.982905] smpboot: CPU 2 is now offline
[ 2749.984537] kvm: disabling virtualization on CPU3
[ 2750.085264] smpboot: CPU 3 is now offline
[ 2750.086382] ACPI: Low-level resume complete
[ 2750.086445] PM: Restoring platform NVS memory
[ 2750.087024] Enabling non-boot CPUs ...
[ 2750.087075] x86: Booting SMP configuration:
[ 2750.087076] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 2750.098173] kvm: enabling virtualization on CPU1
[ 2750.100566] CPU1 is up
[ 2750.100587] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 2750.111679] kvm: enabling virtualization on CPU2
[ 2750.114051] CPU2 is up
[ 2750.114073] smpboot: Booting Node 0 Processor 3 APIC 0x5
[ 2750.125062] kvm: enabling virtualization on CPU3
[ 2750.127498] CPU3 is up
[ 2750.129833] ACPI: Waking up from system sleep state S3
[ 2750.146753] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 2750.146887] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 2750.146985] PM: noirq resume of devices complete after 16.474 msecs
[ 2750.149104] PM: early resume of devices complete after 2.083 msecs
[ 2750.149247] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
[ 2750.149305] atl1c 0000:02:00.0: System wakeup disabled by ACPI
[ 2750.150366] ath: phy0: ASPM enabled: 0x42
[ 2750.150521] sd 0:0:0:0: [sda] Starting disk
[ 2750.150679] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 2750.254594] PM: resume of devices complete after 105.456 msecs
[ 2750.258361] PM: Finishing wakeup.
[ 2750.258363] Restarting tasks ... done.
[ 2750.260591] [Firmware Bug]: battery: (dis)charge rate invalid.
[ 2750.260599] video LNXVIDEO:00: Restoring backlight state
[ 2750.260691] video LNXVIDEO:01: Restoring backlight state
[ 2750.478892] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2750.483418] ata2.00: configured for UDMA/100
[ 2750.889224] psmouse serio2: synaptics: queried max coordinates: x [..5682], y [..4692]
[ 2752.775303] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2752.780531] ata1.00: configured for UDMA/133
[ 2753.354378] atl1c 0000:02:00.0: irq 45 for MSI/MSI-X
[ 2753.368916] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2753.400660] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2754.305724] wlan0: authenticate with 10:7b:ef:7f:a2:98
[ 2754.314447] wlan0: send auth to 10:7b:ef:7f:a2:98 (try 1/3)
[ 2754.316512] wlan0: authenticated
[ 2754.319743] wlan0: associate with 10:7b:ef:7f:a2:98 (try 1/3)
[ 2754.323332] wlan0: RX AssocResp from 10:7b:ef:7f:a2:98 (capab=0x411 status=0 aid=2)
[ 2754.323390] wlan0: associated
[ 2754.323427] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 2774.165078] usb 1-1.2: new high-speed USB device number 4 using ehci-pci
[ 2774.258829] usb 1-1.2: New USB device found, idVendor=1c88, idProduct=0007
[ 2774.258834] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2774.258838] usb 1-1.2: Product: SM-USB 007
[ 2774.258841] usb 1-1.2: Manufacturer: Somagic, Inc.
[ 2774.258843] usb 1-1.2: SerialNumber: SMBL007
[ 2804.257805] init: anacron main process (3251) killed by TERM signal
[ 2869.904213] systemd-hostnamed[3784]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 2889.454111] usb 1-1.2: USB disconnect, device number 4
[ 2896.638263] usb 2-1.2: new high-speed USB device number 3 using ehci-pci
[ 2896.731900] usb 2-1.2: New USB device found, idVendor=1c88, idProduct=0007
[ 2896.731906] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2896.731909] usb 2-1.2: Product: SM-USB 007
[ 2896.731912] usb 2-1.2: Manufacturer: Somagic, Inc.
[ 2896.731915] usb 2-1.2: SerialNumber: SMBL007
[ 4440.450185] perf interrupt took too long (5005 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
[ 4482.061568] wlan0: deauthenticating from 10:7b:ef:7f:a2:98 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 4482.071560] cfg80211: Calling CRDA to update world regulatory domain
[ 4482.077556] cfg80211: World regulatory domain updated:
[ 4482.077563] cfg80211:  DFS Master region: unset
[ 4482.077566] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 4482.077571] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 4482.077575] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 4482.077579] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 4482.077583] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 4482.077586] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 4482.510742] init: anacron main process (5236) killed by TERM signal
[ 4483.787983] PM: Syncing filesystems ... done.
[ 4484.171540] PM: Preparing system for mem sleep
[ 4485.240218] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 4485.242242] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 4485.243445] PM: Entering mem sleep
[ 4485.243535] Suspending console(s) (use no_console_suspend to debug)
[ 4485.244108] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 4485.244251] sd 0:0:0:0: [sda] Stopping disk
[ 4485.688156] PM: suspend of devices complete after 444.267 msecs
[ 4485.704055] PM: late suspend of devices complete after 15.889 msecs
[ 4485.704662] atl1c 0000:02:00.0: System wakeup enabled by ACPI
[ 4485.704918] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 4485.704952] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 4485.720131] PM: noirq suspend of devices complete after 16.066 msecs
[ 4485.720300] ACPI: Preparing to enter system sleep state S3
[ 4485.928226] PM: Saving platform NVS memory
[ 4485.929004] Disabling non-boot CPUs ...
[ 4485.930472] kvm: disabling virtualization on CPU1
[ 4486.032019] smpboot: CPU 1 is now offline
[ 4486.033909] kvm: disabling virtualization on CPU2
[ 4486.136062] smpboot: CPU 2 is now offline
[ 4486.136850] Broke affinity for irq 16
[ 4486.136880] Broke affinity for irq 23
[ 4486.136883] Broke affinity for irq 41
[ 4486.137907] kvm: disabling virtualization on CPU3
[ 4486.240065] smpboot: CPU 3 is now offline
[ 4486.241398] ACPI: Low-level resume complete
[ 4486.241462] PM: Restoring platform NVS memory
[ 4486.242005] Enabling non-boot CPUs ...
[ 4486.242058] x86: Booting SMP configuration:
[ 4486.242059] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 4486.253057] kvm: enabling virtualization on CPU1
[ 4486.255473] CPU1 is up
[ 4486.255493] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 4486.266587] kvm: enabling virtualization on CPU2
[ 4486.268964] CPU2 is up
[ 4486.268985] smpboot: Booting Node 0 Processor 3 APIC 0x5
[ 4486.280073] kvm: enabling virtualization on CPU3
[ 4486.282513] CPU3 is up
[ 4486.284826] ACPI: Waking up from system sleep state S3
[ 4486.297530] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 4486.301528] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 4486.301693] PM: noirq resume of devices complete after 16.445 msecs
[ 4486.303775] PM: early resume of devices complete after 2.046 msecs
[ 4486.303908] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
[ 4486.304282] sd 0:0:0:0: [sda] Starting disk
[ 4486.305076] ath: phy0: ASPM enabled: 0x42
[ 4486.305107] atl1c 0000:02:00.0: System wakeup disabled by ACPI
[ 4486.305592] mei_me 0000:00:16.0: less data available than length=00000006.
[ 4486.321519] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 4486.411359] PM: resume of devices complete after 107.541 msecs
[ 4486.412729] PM: Finishing wakeup.
[ 4486.412732] Restarting tasks ... done.
[ 4486.414889] video LNXVIDEO:00: Restoring backlight state
[ 4486.415088] video LNXVIDEO:01: Restoring backlight state
[ 4486.621504] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4486.626089] ata2.00: configured for UDMA/100
[ 4487.054336] psmouse serio2: synaptics: queried max coordinates: x [..5682], y [..4692]
[ 4488.546075] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4488.551979] ata1.00: configured for UDMA/133
[ 4488.813865] init: anacron main process (5525) killed by TERM signal
[ 4488.959154] atl1c 0000:02:00.0: irq 45 for MSI/MSI-X
[ 4488.975650] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4489.004618] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4490.735475] wlan0: authenticate with 10:7b:ef:7f:a2:98
[ 4490.751760] wlan0: send auth to 10:7b:ef:7f:a2:98 (try 1/3)
[ 4490.754217] wlan0: authenticated
[ 4490.754601] wlan0: associate with 10:7b:ef:7f:a2:98 (try 1/3)
[ 4490.759323] wlan0: RX AssocResp from 10:7b:ef:7f:a2:98 (capab=0x411 status=0 aid=2)
[ 4490.759398] wlan0: associated
[ 4490.759415] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 4490.802676] wlan0: deauthenticating from 10:7b:ef:7f:a2:98 by local choice (Reason: 2=PREV_AUTH_NOT_VALID)
[ 4490.813335] cfg80211: Calling CRDA to update world regulatory domain
[ 4490.813411] wlan0: authenticate with 10:7b:ef:7f:a2:98
[ 4490.821965] wlan0: send auth to 10:7b:ef:7f:a2:98 (try 1/3)
[ 4490.822239] cfg80211: World regulatory domain updated:
[ 4490.822245] cfg80211:  DFS Master region: unset
[ 4490.822248] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 4490.822254] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 4490.822259] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 4490.822264] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 4490.822269] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 4490.822275] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 4490.823745] wlan0: authenticated
[ 4490.826636] wlan0: associate with 10:7b:ef:7f:a2:98 (try 1/3)
[ 4490.830278] wlan0: RX AssocResp from 10:7b:ef:7f:a2:98 (capab=0x411 status=0 aid=2)
[ 4490.830344] wlan0: associated
[ 4713.713600] usb 2-1.2: USB disconnect, device number 3
[ 4717.556020] usb 2-1.2: new high-speed USB device number 4 using ehci-pci
[ 4717.649734] usb 2-1.2: New USB device found, idVendor=1c88, idProduct=0007
[ 4717.649740] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4717.649743] usb 2-1.2: Product: SM-USB 007
[ 4717.649746] usb 2-1.2: Manufacturer: Somagic, Inc.
[ 4717.649749] usb 2-1.2: SerialNumber: SMBL007
[ 5641.576153] usb 2-1.2: USB disconnect, device number 4
[ 5643.478495] usb 2-1.2: new high-speed USB device number 5 using ehci-pci
[ 5643.572148] usb 2-1.2: New USB device found, idVendor=1c88, idProduct=0007
[ 5643.572154] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5643.572158] usb 2-1.2: Product: SM-USB 007
[ 5643.572162] usb 2-1.2: Manufacturer: Somagic, Inc.
[ 5643.572165] usb 2-1.2: SerialNumber: SMBL007
[ 5978.023936] usb 2-1.2: USB disconnect, device number 5
[ 5979.957446] usb 2-1.2: new high-speed USB device number 6 using ehci-pci
[ 5980.051250] usb 2-1.2: New USB device found, idVendor=1c88, idProduct=0007
[ 5980.051255] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5980.051259] usb 2-1.2: Product: SM-USB 007
[ 5980.051262] usb 2-1.2: Manufacturer: Somagic, Inc.
[ 5980.051264] usb 2-1.2: SerialNumber: SMBL007
[ 6155.486048] usb 2-1.2: USB disconnect, device number 6
[ 6164.527289] usb 1-1.2: new high-speed USB device number 5 using ehci-pci
[ 6164.620405] usb 1-1.2: New USB device found, idVendor=1c88, idProduct=0007
[ 6164.620410] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6164.620412] usb 1-1.2: Product: SM-USB 007
[ 6164.620413] usb 1-1.2: Manufacturer: Somagic, Inc.
[ 6164.620415] usb 1-1.2: SerialNumber: SMBL007
[ 7257.491655] usb 1-1.2: USB disconnect, device number 5
[ 7259.899649] usb 2-1.4: new high-speed USB device number 7 using ehci-pci
[ 7259.993259] usb 2-1.4: New USB device found, idVendor=1c88, idProduct=0007
[ 7259.993267] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7259.993271] usb 2-1.4: Product: SM-USB 007
[ 7259.993274] usb 2-1.4: Manufacturer: Somagic, Inc.
[ 7259.993278] usb 2-1.4: SerialNumber: SMBL007
[ 8060.236860] usb 2-1.4: USB disconnect, device number 7
[ 9288.910858] wlan0: deauthenticating from 10:7b:ef:7f:a2:98 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 9288.921079] cfg80211: Calling CRDA to update world regulatory domain
[ 9289.129254] cfg80211: World regulatory domain updated:
[ 9289.129257] cfg80211:  DFS Master region: unset
[ 9289.129259] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 9289.129261] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 9289.129263] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 9289.129264] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 9289.129266] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 9289.129267] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 9291.721878] PM: Syncing filesystems ... done.
[ 9291.973255] PM: Preparing system for mem sleep
[ 9292.689731] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 9292.691495] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 9292.692657] PM: Entering mem sleep
[ 9292.692739] Suspending console(s) (use no_console_suspend to debug)
[ 9292.693082] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 9292.693180] sd 0:0:0:0: [sda] Stopping disk
[ 9293.137592] PM: suspend of devices complete after 444.569 msecs
[ 9293.153592] PM: late suspend of devices complete after 15.990 msecs
[ 9293.153996] atl1c 0000:02:00.0: System wakeup enabled by ACPI
[ 9293.154169] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 9293.154304] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 9293.169594] PM: noirq suspend of devices complete after 15.993 msecs
[ 9293.169726] ACPI: Preparing to enter system sleep state S3
[ 9293.377668] PM: Saving platform NVS memory
[ 9293.378106] Disabling non-boot CPUs ...
[ 9293.379383] kvm: disabling virtualization on CPU1
[ 9293.481540] smpboot: CPU 1 is now offline
[ 9293.483215] kvm: disabling virtualization on CPU2
[ 9293.585533] smpboot: CPU 2 is now offline
[ 9293.586139] Broke affinity for irq 16
[ 9293.586149] Broke affinity for irq 17
[ 9293.586168] Broke affinity for irq 23
[ 9293.586170] Broke affinity for irq 41
[ 9293.587179] kvm: disabling virtualization on CPU3
[ 9293.689595] smpboot: CPU 3 is now offline
[ 9293.690759] ACPI: Low-level resume complete
[ 9293.690822] PM: Restoring platform NVS memory
[ 9293.691387] Enabling non-boot CPUs ...
[ 9293.691439] x86: Booting SMP configuration:
[ 9293.691440] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 9293.702438] kvm: enabling virtualization on CPU1
[ 9293.704872] CPU1 is up
[ 9293.704894] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 9293.715887] kvm: enabling virtualization on CPU2
[ 9293.718259] CPU2 is up
[ 9293.718281] smpboot: Booting Node 0 Processor 3 APIC 0x5
[ 9293.729369] kvm: enabling virtualization on CPU3
[ 9293.731821] CPU3 is up
[ 9293.734147] ACPI: Waking up from system sleep state S3
[ 9293.747006] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 9293.747063] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 9293.751020] PM: noirq resume of devices complete after 16.428 msecs
[ 9293.753102] PM: early resume of devices complete after 2.047 msecs
[ 9293.753235] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
[ 9293.753302] atl1c 0000:02:00.0: System wakeup disabled by ACPI
[ 9293.754414] ath: phy0: ASPM enabled: 0x42
[ 9293.755118] mei_me 0000:00:16.0: less data available than length=00000004.
[ 9293.755728] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 9293.755956] sd 0:0:0:0: [sda] Starting disk
[ 9294.075003] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 9294.079785] ata2.00: configured for UDMA/100
[ 9294.501909] psmouse serio2: synaptics: queried max coordinates: x [..5682], y [..4692]
[ 9294.764637] PM: resume of devices complete after 1011.257 msecs
[ 9294.764878] PM: Finishing wakeup.
[ 9294.764879] Restarting tasks ... done.
[ 9294.771657] video LNXVIDEO:00: Restoring backlight state
[ 9294.771721] video LNXVIDEO:01: Restoring backlight state
[ 9296.403605] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9296.416876] ata1.00: configured for UDMA/133
[ 9296.815263] atl1c 0000:02:00.0: irq 45 for MSI/MSI-X
[ 9296.828790] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9296.856852] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 9298.589174] wlan0: authenticate with 10:7b:ef:7f:a2:98
[ 9298.605939] wlan0: send auth to 10:7b:ef:7f:a2:98 (try 1/3)
[ 9298.613222] wlan0: authenticated
[ 9298.616147] wlan0: associate with 10:7b:ef:7f:a2:98 (try 1/3)
[ 9298.621846] wlan0: RX AssocResp from 10:7b:ef:7f:a2:98 (capab=0x411 status=0 aid=3)
[ 9298.621907] wlan0: associated
[ 9298.621942] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 9299.166106] wlan0: deauthenticating from 10:7b:ef:7f:a2:98 by local choice (Reason: 2=PREV_AUTH_NOT_VALID)
[ 9299.176872] cfg80211: Calling CRDA to update world regulatory domain
[ 9299.176969] wlan0: authenticate with 10:7b:ef:7f:a2:98
[ 9299.185623] wlan0: send auth to 10:7b:ef:7f:a2:98 (try 1/3)
[ 9299.186754] cfg80211: World regulatory domain updated:
[ 9299.186759] cfg80211:  DFS Master region: unset
[ 9299.186760] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 9299.186764] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 9299.186766] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 9299.186769] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 9299.186771] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 9299.186773] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 9299.189356] wlan0: authenticated
[ 9299.192324] wlan0: associate with 10:7b:ef:7f:a2:98 (try 1/3)
[ 9299.196436] wlan0: RX AssocResp from 10:7b:ef:7f:a2:98 (capab=0x411 status=0 aid=3)
[ 9299.196509] wlan0: associated
[12359.622582] wlan0: deauthenticating from 10:7b:ef:7f:a2:98 by local choice (Reason: 3=DEAUTH_LEAVING)
[12359.638552] cfg80211: Calling CRDA to update world regulatory domain
[12359.643031] cfg80211: World regulatory domain updated:
[12359.643036] cfg80211:  DFS Master region: unset
[12359.643038] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[12359.643041] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[12359.643043] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[12359.643046] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[12359.643048] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[12359.643050] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[12361.829926] PM: Syncing filesystems ... done.
[12363.992953] PM: Preparing system for mem sleep
[12364.666341] Freezing user space processes ... (elapsed 0.001 seconds) done.
[12364.668154] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[12364.669319] PM: Entering mem sleep
[12364.669414] Suspending console(s) (use no_console_suspend to debug)
[12364.669817] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[12364.669924] sd 0:0:0:0: [sda] Stopping disk
[12365.113766] PM: suspend of devices complete after 444.062 msecs
[12365.129645] PM: late suspend of devices complete after 15.868 msecs
[12365.130098] atl1c 0000:02:00.0: System wakeup enabled by ACPI
[12365.130293] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[12365.130310] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[12365.145669] PM: noirq suspend of devices complete after 16.016 msecs
[12365.145804] ACPI: Preparing to enter system sleep state S3
[12365.353749] PM: Saving platform NVS memory
[12365.354177] Disabling non-boot CPUs ...
[12365.355469] kvm: disabling virtualization on CPU1
[12365.457592] smpboot: CPU 1 is now offline
[12365.459231] kvm: disabling virtualization on CPU2
[12365.561627] smpboot: CPU 2 is now offline
[12365.563212] kvm: disabling virtualization on CPU3
[12365.665679] smpboot: CPU 3 is now offline
[12365.666830] ACPI: Low-level resume complete
[12365.666894] PM: Restoring platform NVS memory
[12365.667447] Enabling non-boot CPUs ...
[12365.667501] x86: Booting SMP configuration:
[12365.667502] smpboot: Booting Node 0 Processor 1 APIC 0x1
[12365.678500] kvm: enabling virtualization on CPU1
[12365.680951] CPU1 is up
[12365.680971] smpboot: Booting Node 0 Processor 2 APIC 0x4
[12365.691965] kvm: enabling virtualization on CPU2
[12365.694339] CPU2 is up
[12365.694360] smpboot: Booting Node 0 Processor 3 APIC 0x5
[12365.705448] kvm: enabling virtualization on CPU3
[12365.707888] CPU3 is up
[12365.710210] ACPI: Waking up from system sleep state S3
[12365.723125] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[12365.723159] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[12365.727158] PM: noirq resume of devices complete after 16.521 msecs
[12365.729282] PM: early resume of devices complete after 2.088 msecs
[12365.729438] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
[12365.729635] atl1c 0000:02:00.0: System wakeup disabled by ACPI
[12365.729731] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[12365.730743] ath: phy0: ASPM enabled: 0x42
[12365.740111] sd 0:0:0:0: [sda] Starting disk
[12365.792162] PM: resume of devices complete after 62.857 msecs
[12365.794970] PM: Finishing wakeup.
[12365.794972] Restarting tasks ... done.
[12365.797517] video LNXVIDEO:00: Restoring backlight state
[12365.797621] video LNXVIDEO:01: Restoring backlight state
[12366.055048] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[12366.059662] ata2.00: configured for UDMA/100
[12366.466969] psmouse serio2: synaptics: queried max coordinates: x [..5682], y [..4692]
[12368.367727] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[12368.380123] ata1.00: configured for UDMA/133
[12368.746418] atl1c 0000:02:00.0: irq 45 for MSI/MSI-X
[12368.761045] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[12368.789042] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[12370.521535] wlan0: authenticate with 10:7b:ef:7f:a2:98
[12370.537400] wlan0: send auth to 10:7b:ef:7f:a2:98 (try 1/3)
[12370.671364] wlan0: authenticated
[12370.672299] wlan0: associate with 10:7b:ef:7f:a2:98 (try 1/3)
[12370.676202] wlan0: RX AssocResp from 10:7b:ef:7f:a2:98 (capab=0x411 status=0 aid=2)
[12370.676298] wlan0: associated
[12370.676343] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[12370.721943] wlan0: deauthenticating from 10:7b:ef:7f:a2:98 by local choice (Reason: 2=PREV_AUTH_NOT_VALID)
[12370.732676] cfg80211: Calling CRDA to update world regulatory domain
[12370.733098] wlan0: authenticate with 10:7b:ef:7f:a2:98
[12370.742164] wlan0: send auth to 10:7b:ef:7f:a2:98 (try 1/3)
[12370.742378] cfg80211: World regulatory domain updated:
[12370.742382] cfg80211:  DFS Master region: unset
[12370.742383] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[12370.742386] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[12370.742388] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[12370.742391] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[12370.742393] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[12370.742395] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[12371.824601] wlan0: send auth to 10:7b:ef:7f:a2:98 (try 2/3)
[12371.842770] wlan0: authenticated
[12371.844637] wlan0: associate with 10:7b:ef:7f:a2:98 (try 1/3)
[12371.848244] wlan0: RX AssocResp from 10:7b:ef:7f:a2:98 (capab=0x411 status=0 aid=2)
[12371.848310] wlan0: associated
[12386.998992] systemd-hostnamed[11543]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[13902.801660] systemd-hostnamed[12234]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[15959.121642] nvidia 0000:01:00.0: irq 46 for MSI/MSI-X
[15959.124117] ACPI Warning: \_SB_.PCI0.P0P2.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[15959.124185] ACPI Warning: \_SB_.PCI0.P0P2.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[15959.124221] ACPI Warning: \_SB_.PCI0.P0P2.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[15959.124255] ACPI Warning: \_SB_.PCI0.P0P2.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[15959.124289] ACPI Warning: \_SB_.PCI0.P0P2.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[15959.124324] ACPI Warning: \_SB_.PCI0.P0P2.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[15959.124380] ACPI Warning: \_SB_.PCI0.P0P2.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[15959.124415] ACPI Warning: \_SB_.PCI0.P0P2.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[15959.125173] ACPI Warning: \_SB_.PCI0.P0P2.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[16211.548966] systemd-hostnamed[13621]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[16541.589510] usb 2-1.2: new high-speed USB device number 8 using ehci-pci
[16541.683242] usb 2-1.2: New USB device found, idVendor=1c88, idProduct=0007
[16541.683247] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[16541.683251] usb 2-1.2: Product: SM-USB 007
[16541.683255] usb 2-1.2: Manufacturer: Somagic, Inc.
[16541.683258] usb 2-1.2: SerialNumber: SMBL007
[16572.504177] usb 2-1.2: USB disconnect, device number 8
[16576.446949] usb 2-1.2: new high-speed USB device number 9 using ehci-pci
[16576.540607] usb 2-1.2: New USB device found, idVendor=1c88, idProduct=0007
[16576.540614] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[16576.540618] usb 2-1.2: Product: SM-USB 007
[16576.540622] usb 2-1.2: Manufacturer: Somagic, Inc.
[16576.540625] usb 2-1.2: SerialNumber: SMBL007



[eklenti yönetici tarafından silindi]

[betseg]

[1] bağlantısında yapılandırma için bazı işlemler verilmiş, ama 2013'ten kalma olduğu için sağlıklı sonuçlar vermeyebilir.
[1]: https://code.google.com/p/easycap-somagic-linux/wiki/GettingStarted

[metinalim]

arkadaşlar verdiğiniz bağlantının yönlendirmesi ile  driverlerini kurdum. orasıda ubuntu yazılım merkezine yönlendirdi ve yüklendi olarak gördüm. daha sonra KİNO programını açtım ve capture özelliğini açtığımda WARNING : Raw 1394 kernel module not loaded or failure to read /  write / dev / raw1394!      diye bir yazı yazıyor ve açmıyor ne yapmam lazım

[heartsmagic]

Bu sorun için bir ara bayağı uğraştık ama çözemedik ne yazık ki:
https://forum.ubuntu-tr.net/index.php?topic=48232.0

Bakmak lazım demişim ama haliyle unutmuşum. Kaldı ki o başlıkta gördüğüm tüm önerileri denetmiştim arkadaşa.

[metinalim]

yinede çok çok saol arkadaşım anlaşılan sırf bunun için windows kurmak zorunda kalacağım      ubuntunun merkzine mesaj mı atalım ne yapalım 

[heartsmagic]

Ubuntu'nun merkezinden çok çekirdekle alakalı bir durum muhtemelen  Gerçi sorun cidden çözümsüz mü yoksa çözümü var da biz mi bulamıyoruz onu da bilmiyorum. Bir türlü ilgili modülü kullanıp ilgili dosyayı oluşturamamıştık diğer tarafta.

Şunu bir dener misin:

Kod Seç Genişlet

sudo apt-get install libraw1394-11
sudo mknod /dev/raw1394 c 171 0
sudo chmod 666 /dev/raw1394
Çıktıları da geçersin buraya.

[metinalim]

Kod Seç Genişlet

Paket listeleri okunuyor... Bitti
Bağımlılık ağacı oluşturuluyor       
Durum bilgisi okunuyor... Bitti     
libraw1394-11 zaten en yeni sürümde.
libraw1394-11 elle kurulmuş olarak ayarlı.
Aşağıdaki paketler otomatik olarak kurulmuş ve artık bu paketlere gerek duyulmuyor:
  account-plugin-windows-live gir1.2-keybinder-3.0 libcuda1-331
  libkeybinder-3.0-0 libupstart1 linux-headers-3.16.0-30
  linux-headers-3.16.0-30-generic linux-headers-generic-lts-utopic
  linux-image-3.16.0-30-generic linux-image-extra-3.16.0-30-generic
  linux-image-generic-lts-utopic nvidia-331-uvm nvidia-340-uvm
  nvidia-opencl-icd-331
Bu paketleri kaldırmak için 'apt-get autoremove' komutunu kullanın.
0 paket yükseltilecek, 0 yeni paket kurulacak, 0 paket kaldırılacak ve 12 paket yükseltilmeyecek.
he-man@heman-Aspire-5745G:~$ sudo mknod /dev/raw1394 c 171 0
he-man@heman-Aspire-5745G:~$ sudo chmod 666 /dev/raw1394



Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 03 Kasım 2015 - 22:12:47
maalesef sorun hala devam ediyor olmassa kapatalım konuyu çünkü daha önce uğraştım demiştiniz. aslında linux dünyası bunun çözümünü bulur ama sürekli kullanılan bir malzeme olmadığı için herhalde önemsemediler


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 03 Kasım 2015 - 22:25:16
birde kino yu değiştirsek olmaz mı acaba?  kino nun yerini tutan başka bir program var mıdır?

[heartsmagic]

Kod Seç Genişlet

ls -l /dev/raw1394
ne diyor?

Mesele burada Kino değil, sorun daha temel. Firewire meselesi yani.

[metinalim]

ls -l /dev/raw1394

Kod Seç Genişlet

crw-rw-rw- 1 root root 171, 0 Kas  3 22:08 /dev/raw1394

[heartsmagic]

Oluşmuş dosya, ne yazık ki farklı bir önerim yok.

[nuked]

illa kino mu kullanmak gerekiyor bilmiyorum da benim de buna benzer bir kayıt aygıtım vardı direkt olarak herhangi bir uygulama ile kullanabiliyordum. mplayer,vlc,gstreamer gibi yani sonuçta /dev/ dizini altına dosyaya cihaz bağlandığında her türlü kayıt yapılabiliyor. /dev/video0 yada video1 gibi bir dosya oluşuyor mu kontrol edebilir misiniz.

aşağıdaki komutları uygular mısınız sonuç alabilecek misiniz.

Kod Seç Genişlet

sudo somagic-capture --pal --sync=1 --lum-prefilter --contrast 82 | ffplay -hide_banner -f rawvideo -pixel_format uyvy422 -video_size 720x576 -aspect 4:3 -i pipe:0 -flags2 fast -vf "scale=720/2:480/2" -fast -sync audio -framedrop -infbuf -window_title "somagic capture"

Kod Seç Genişlet

sudo somagic-capture --pal --sync=1 --lum-prefilter --contrast 82 |  gst-launch-1.0 fdsrc ! videoparse format=uyvy width=720 height=576 framerate=25/1 ! glimagesink

Kod Seç Genişlet


sudo mplayer tv:// -tv driver=v4l2:width=720:height=576:fps=25: outfmt=rgb24:device=/dev/video0
sudo mplayer tv:// -tv driver=v4l2:width=720:height=576:fps=25: outfmt=rgb24:device=/dev/video0:input=3
sudo mplayer tv:// -tv driver=v4l2:width=720:height=576:fps=25: outfmt=rgb24:device=/dev/video0:input=2
sudo mplayer tv:// -tv driver=v4l2:width=720:height=576:fps=25: outfmt=rgb24:device=/dev/video0:input=1
sudo mplayer tv:// -tv driver=v4l2:width=720:height=576:fps=25: outfmt=rgb24:device=/dev/video0:input=0

[metinalim]

Kod Seç Genişlet

sudo somagic-capture --pal --sync=1 --lum-prefilter --contrast 82 | ffplay -hide_banner -f rawvideo -pixel_format uyvy422 -video_size 720x576 -aspect 4:3 -i pipe:0 -flags2 fast -vf "scale=720/2:480/2" -fast -sync audio -framedrop -infbuf -window_title "somagic capture
> sudo somagic-capture --pal --sync=1 --lum-prefilter --contrast 82 |  gst-launch-1.0 fdsrc ! videoparse format=uyvy width=720 height=576 framerate=25/1 ! glimagesink
> sudo mplayer tv:// -tv driver=v4l2:width=720:height=576:fps=25: outfmt=rgb24:device=/dev/video0
> sudo mplayer tv:// -tv driver=v4l2:width=720:height=576:fps=25: outfmt=rgb24:device=/dev/video0:input=3
> sudo mplayer tv:// -tv driver=v4l2:width=720:height=576:fps=25: outfmt=rgb24:device=/dev/video0:input=2
> sudo mplayer tv:// -tv driver=v4l2:width=720:height=576:fps=25: outfmt=rgb24:device=/dev/video0:input=1
> sudo mplayer tv:// -tv driver=v4l2:width=720:height=576:fps=25: outfmt=rgb24:device=/dev/video0:input=0
>

maalesef bi sonuç alamadım



Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 04 Kasım 2015 - 19:20:58

Kod Seç Genişlet

sudo somagic-capture --pal --sync=1 --lum-prefilter --contrast 82 | ffplay -hide_banner -f rawvideo -pixel_format uyvy422 -video_size 720x576 -aspect 4:3 -i pipe:0 -flags2 fast -vf "scale=720/2:480/2" -fast -sync audio -framedrop -infbuf -window_title "somagic capture"

[1]+  Durdu                   

Kod Seç Genişlet

sudo somagic-capture --pal --sync=1 --lum-prefilter --contrast 82 | ffplay -hide_banner -f rawvideo -pixel_format uyvy422 -video_size 720x576 -aspect 4:3 -i pipe:0 -flags2 fast -vf "scale=720/2:480/2" -fast -sync audio -framedrop -infbuf -window_title "somagic capture"
he-man@heman-Aspire-5745G:~$ ffplay: komut bulunamadı