Odamda kablosuz baglanmiyor

[abbasc]

Selam arkadaslar. Ilginc bir sorunla karsi karsiyayim.

Wireless modem salonda duruyor. Onun yanindaki masada internete girebiliyorum (uc dis cekiyor). Ama laptopu alip odama ciktigimda wireless bir turlu baglanmiyor (bir bazen iki dis gucunde cekim var).
Wireless gorunuyor fakat tum ugraslarina ragmen ubuntu baglanamiyor
Ne yapabilirim acaba?

[if]

https://forum.ubuntu-tr.net/index.php?topic=28764.0

[abbasc]

simdi baglandi ??
laptopu cam kenarindan kapiya dogru goturuyordum ve birden baglanti geri geldi. Artik hic kesilmiyor. Garip bir olay ama laptopu odanin icinde dolastirmak bu olayi cozdu.
tesekkurler.


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 14 Haziran 2015 - 23:42:16
malesef tyine koptu. Saka gibi gorunuyor. Internet baglantisini tekrar kurmam icin laptop u odanin icerisinde dolastirmam gerekiyor

Kod Seç Genişlet

c@c-Satellite-L500:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=14.04
DISTRIB_CODENAME=trusty
DISTRIB_DESCRIPTION="Ubuntu 14.04.2 LTS"

Kod Seç Genişlet

c@c-Satellite-L500:~$ uname -a
Linux c-Satellite-L500 3.16.0-40-generic #54~14.04.1-Ubuntu SMP Wed Jun 10 17:30:06 UTC 2015 i686 i686 i686 GNU/Linux


Kod Seç Genişlet

c@c-Satellite-L500:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
0e:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
14:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN Controller (rev 10)


Kod Seç Genişlet

c@c-Satellite-L500:~$ lsusb
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 04f2:b120 Chicony Electronics Co., Ltd
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


Kod Seç Genişlet

c@c-Satellite-L500:~$ rfkill list
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no

Kod Seç Genişlet

c@c-Satellite-L500:~$ sudo lshw -C network
[sudo] password for c:
  *-network               
       description: Ethernet interface
       product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:0e:00.0
       logical name: eth0
       version: 02
       serial: 70:5a:b6:6a:ed:7b
       size: 10Mbit/s
       capacity: 100Mbit/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s
       resources: irq:44 ioport:3000(size=256) memory:f2010000-f2010fff memory:f2000000-f200ffff memory:c0000000-c001ffff
  *-network
       description: Wireless interface
       product: RTL8191SEvB Wireless LAN Controller
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:14:00.0
       logical name: wlan0
       version: 10
       serial: 00:26:b6:59:50:08
       width: 32 bits
       clock: 33MHz
       capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
       configuration: broadcast=yes driver=rtl8192se driverversion=3.16.0-40-generic firmware=N/A ip=192.168.0.3 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn
       resources: irq:19 ioport:4000(size=256) memory:f2200000-f2203fff


Kod Seç Genişlet

c@c-Satellite-L500:~$ ifconfig
eth0      Link encap:Ethernet  HWaddr 70:5a:b6:6a:ed:7b 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:10549 errors:0 dropped:0 overruns:0 frame:0
          TX packets:10549 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:1041441 (1.0 MB)  TX bytes:1041441 (1.0 MB)

wlan0     Link encap:Ethernet  HWaddr 00:26:b6:59:50:08 
          inet addr:192.168.0.3  Bcast:192.168.0.255  Mask:255.255.255.0
          inet6 addr: fe80::226:b6ff:fe59:5008/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:65024 errors:0 dropped:0 overruns:0 frame:0
          TX packets:65491 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:50024680 (50.0 MB)  TX bytes:10320452 (10.3 MB)


Kod Seç Genişlet

c@c-Satellite-L500:~$ iwconfig
wlan0     IEEE 802.11bgn  ESSID:"swallow residance2G" 
          Mode:Managed  Frequency:2.437 GHz  Access Point: 80:37:73:15:8D:70   
          Bit Rate=7.2 Mb/s   Tx-Power=20 dBm   
          Retry short limit:7   RTS thr=2347 B   Fragment thr:off
          Power Management:off
          Link Quality=34/70  Signal level=-76 dBm 
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:323   Missed beacon:0

lo        no wireless extensions.

eth0      no wireless extensions.


Kod Seç Genişlet

c@c-Satellite-L500:~$ iwlist scanning
wlan0     Scan completed :
          Cell 01 - Address: 80:37:73:15:8D:70
                    Channel:6
                    Frequency:2.437 GHz (Channel 6)
                    Quality=34/70  Signal level=-76 dBm 
                    Encryption key:on
                    ESSID:"swallow residance2G"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
                              9 Mb/s; 12 Mb/s; 18 Mb/s
                    Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=00000000a5307499
                    Extra: Last beacon: 29800ms ago
                    IE: Unknown: 00137377616C6C6F77207265736964616E63653247
                    IE: Unknown: 010882848B960C121824
                    IE: Unknown: 030106
                    IE: Unknown: 0706474220010D14
                    IE: Unknown: 2A0104
                    IE: Unknown: 32043048606C
                    IE: Unknown: 2D1AAD0103FFFF0000000000000000000001000000000406E6A70C00
                    IE: Unknown: 3D1606000500000000000000000000000000000000000000
                    IE: Unknown: 4A0E14000A002C01C800140005001900
                    IE: Unknown: 7F080100000000000040
                    IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00
                    IE: Unknown: DD0900037F01010000FF7F
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : CCMP TKIP
                        Authentication Suites (1) : PSK
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : CCMP TKIP
                        Authentication Suites (1) : PSK
                    IE: Unknown: DD8A0050F204104A00011010440001021057000101103B00010310470010C5E472CBF3DD5E538BA8F510455FC60E102100074E65746765617210230007564D444734393010240007564D44473439301042000D343833313439575531303435341054000800060050F204000110110007564D444734393010080002210C103C0001011049000600372A000120

lo        Interface doesn't support scanning.

eth0      Interface doesn't support scanning.


Kod Seç Genişlet

c@c-Satellite-L500:~$ lsmod
Module                  Size  Used by
ctr                    12905  1
ccm                    17496  1
dm_crypt               22653  0
snd_hda_codec_hdmi     46396  1
rfcomm                 58045  0
bnep                   18895  2
snd_hda_codec_realtek    70514  1
snd_hda_codec_generic    62931  1 snd_hda_codec_realtek
bluetooth             391253  10 bnep,rfcomm
6lowpan_iphc           18262  1 bluetooth
snd_hda_intel          29285  3
snd_hda_controller     29252  1 snd_hda_intel
snd_hda_codec         120371  5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
snd_hwdep              13272  1 snd_hda_codec
snd_pcm                87194  4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller
uvcvideo               71465  0
snd_seq_midi           13324  0
videobuf2_vmalloc      13048  1 uvcvideo
videobuf2_memops       13170  1 videobuf2_vmalloc
arc4                   12536  2
snd_seq_midi_event     14475  1 snd_seq_midi
videobuf2_core         48344  1 uvcvideo
snd_rawmidi            25722  1 snd_seq_midi
rtl8192se              58065  0
v4l2_common            15132  1 videobuf2_core
rtl_pci                26314  1 rtl8192se
videodev              131265  3 uvcvideo,v4l2_common,videobuf2_core
snd_seq                56592  2 snd_seq_midi_event,snd_seq_midi
rtlwifi                53487  2 rtl_pci,rtl8192se
media                  20899  2 uvcvideo,videodev
coretemp               13201  0
mac80211              559100  3 rtl_pci,rtlwifi,rtl8192se
snd_seq_device         14137  3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer              28648  2 snd_pcm,snd_seq
joydev                 17113  0
serio_raw              13251  0
snd                    66670  17 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,snd_seq_device
lpc_ich                16877  0
cfg80211              418839  2 mac80211,rtlwifi
toshiba_acpi           27592  0
shpchp                 32143  0
soundcore              14599  2 snd,snd_hda_codec
sparse_keymap          13708  1 toshiba_acpi
wmi                    18689  1 toshiba_acpi
ene_ir                 18012  0
toshiba_bluetooth      12763  0
rc_core                27222  1 ene_ir
parport_pc             32021  0
ppdev                  17391  0
mac_hid                13059  0
lp                     13299  0
parport                40836  3 lp,ppdev,parport_pc
i915                  808675  3
i2c_algo_bit           13197  1 i915
ahci                   25622  2
drm_kms_helper         55007  1 i915
r8169                  61579  0
psmouse                99565  0
libahci                26970  1 ahci
mii                    13654  1 r8169
drm                   255469  5 i915,drm_kms_helper
video                  19475  1 i915


Kod Seç Genişlet

[ 2497.656562] wlan0: send auth to 80:37:73:15:8d:70 (try 1/3)
[ 2497.760069] wlan0: send auth to 80:37:73:15:8d:70 (try 2/3)
[ 2497.864052] wlan0: send auth to 80:37:73:15:8d:70 (try 3/3)
[ 2497.968047] wlan0: authentication with 80:37:73:15:8d:70 timed out
[ 2499.822798] wlan0: authenticate with 80:37:73:15:8d:70
[ 2499.856099] wlan0: send auth to 80:37:73:15:8d:70 (try 1/3)
[ 2499.960045] wlan0: send auth to 80:37:73:15:8d:70 (try 2/3)
[ 2500.064451] wlan0: send auth to 80:37:73:15:8d:70 (try 3/3)
[ 2500.168037] wlan0: authentication with 80:37:73:15:8d:70 timed out
[ 2942.333818] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2943.330574] wlan0: authenticate with 80:37:73:15:8d:70
[ 2943.340693] wlan0: send auth to 80:37:73:15:8d:70 (try 1/3)
[ 2943.346036] wlan0: authenticated
[ 2943.351394] wlan0: associate with 80:37:73:15:8d:70 (try 1/3)
[ 2943.358517] wlan0: RX AssocResp from 80:37:73:15:8d:70 (capab=0x411 status=0 aid=1)
[ 2943.360286] wlan0: associated
[ 2943.360297] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 2943.361595] cfg80211: Calling CRDA for country: GB
[ 2943.366069] cfg80211: Regulatory domain changed to country: GB
[ 2943.366074] cfg80211:  DFS Master region: unset
[ 2943.366076] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 2943.366079] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 2943.366081] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 2943.366083] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
[ 2943.366085] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm), (0 s)
[ 2943.366087] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 3711.856070] wlan0: Connection to AP 80:37:73:15:8d:70 lost
[ 3711.891802] cfg80211: Calling CRDA to update world regulatory domain
[ 3711.895251] cfg80211: World regulatory domain updated:
[ 3711.895255] cfg80211:  DFS Master region: unset
[ 3711.895257] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 3711.895260] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3711.895262] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3711.895264] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3711.895267] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3711.895269] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3712.984151] wlan0: authenticate with 80:37:73:15:8d:70
[ 3712.997797] wlan0: send auth to 80:37:73:15:8d:70 (try 1/3)
[ 3713.100051] wlan0: send auth to 80:37:73:15:8d:70 (try 2/3)
[ 3713.204048] wlan0: send auth to 80:37:73:15:8d:70 (try 3/3)
[ 3713.308047] wlan0: authentication with 80:37:73:15:8d:70 timed out
[ 3714.662712] wlan0: authenticate with 80:37:73:15:8d:70
[ 3714.680777] wlan0: direct probe to 80:37:73:15:8d:70 (try 1/3)
[ 3714.884049] wlan0: direct probe to 80:37:73:15:8d:70 (try 2/3)
[ 3715.088051] wlan0: direct probe to 80:37:73:15:8d:70 (try 3/3)
[ 3715.292052] wlan0: authentication with 80:37:73:15:8d:70 timed out
[ 3717.147039] wlan0: authenticate with 80:37:73:15:8d:70
[ 3717.183363] wlan0: send auth to 80:37:73:15:8d:70 (try 1/3)
[ 3717.284048] wlan0: send auth to 80:37:73:15:8d:70 (try 2/3)
[ 3717.388050] wlan0: send auth to 80:37:73:15:8d:70 (try 3/3)
[ 3717.492047] wlan0: authentication with 80:37:73:15:8d:70 timed out
[ 3807.901474] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3809.630502] wlan0: authenticate with 80:37:73:15:8d:70
[ 3809.643157] wlan0: send auth to 80:37:73:15:8d:70 (try 1/3)
[ 3809.744049] wlan0: send auth to 80:37:73:15:8d:70 (try 2/3)
[ 3809.747117] wlan0: authenticated
[ 3809.748062] wlan0: associate with 80:37:73:15:8d:70 (try 1/3)
[ 3809.753901] wlan0: RX AssocResp from 80:37:73:15:8d:70 (capab=0x411 status=0 aid=1)
[ 3809.755619] wlan0: associated
[ 3809.755630] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 3809.757402] cfg80211: Calling CRDA for country: GB
[ 3809.761598] cfg80211: Regulatory domain changed to country: GB
[ 3809.761602] cfg80211:  DFS Master region: unset
[ 3809.761604] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 3809.761607] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 3809.761609] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 3809.761611] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
[ 3809.761613] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm), (0 s)
[ 3809.761615] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 3809.770637] wlan0: deauthenticating from 80:37:73:15:8d:70 by local choice (Reason: 2=PREV_AUTH_NOT_VALID)
[ 3809.804030] wlan0: authenticate with 80:37:73:15:8d:70
[ 3809.815217] wlan0: send auth to 80:37:73:15:8d:70 (try 1/3)
[ 3809.818324] wlan0: authenticated
[ 3809.821175] cfg80211: Calling CRDA to update world regulatory domain
[ 3809.823992] cfg80211: World regulatory domain updated:
[ 3809.823997] cfg80211:  DFS Master region: unset
[ 3809.823999] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 3809.824001] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3809.824004] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3809.824035] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3809.824038] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3809.824040] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3809.824217] wlan0: associate with 80:37:73:15:8d:70 (try 1/3)
[ 3810.768112] wlan0: associate with 80:37:73:15:8d:70 (try 2/3)
[ 3810.773948] wlan0: RX AssocResp from 80:37:73:15:8d:70 (capab=0x411 status=0 aid=1)
[ 3810.775623] wlan0: associated
[ 3810.776241] cfg80211: Calling CRDA for country: GB
[ 3810.779097] cfg80211: Regulatory domain changed to country: GB
[ 3810.779101] cfg80211:  DFS Master region: unset
[ 3810.779103] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 3810.779105] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 3810.779108] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 3810.779110] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
[ 3810.779112] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm), (0 s)
[ 3810.779114] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 5693.652073] wlan0: Connection to AP 80:37:73:15:8d:70 lost
[ 5693.687898] cfg80211: Calling CRDA to update world regulatory domain
[ 5693.691366] cfg80211: World regulatory domain updated:
[ 5693.691371] cfg80211:  DFS Master region: unset
[ 5693.691373] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 5693.691375] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 5693.691378] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 5693.691380] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 5693.691382] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 5693.691384] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 5694.814918] wlan0: authenticate with 80:37:73:15:8d:70
[ 5694.843798] wlan0: send auth to 80:37:73:15:8d:70 (try 1/3)
[ 5694.944028] wlan0: send auth to 80:37:73:15:8d:70 (try 2/3)
[ 5695.048031] wlan0: send auth to 80:37:73:15:8d:70 (try 3/3)
[ 5695.152044] wlan0: authentication with 80:37:73:15:8d:70 timed out
[ 5696.510691] wlan0: authenticate with 80:37:73:15:8d:70
[ 5696.523390] wlan0: send auth to 80:37:73:15:8d:70 (try 1/3)
[ 5696.530203] wlan0: authenticated
[ 5696.532160] wlan0: associate with 80:37:73:15:8d:70 (try 1/3)
[ 5696.538754] wlan0: RX AssocResp from 80:37:73:15:8d:70 (capab=0x411 status=0 aid=1)
[ 5696.542091] wlan0: associated
[ 5696.542475] cfg80211: Calling CRDA for country: GB
[ 5696.546077] cfg80211: Regulatory domain changed to country: GB
[ 5696.546082] cfg80211:  DFS Master region: unset
[ 5696.546083] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 5696.546086] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 5696.546088] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 5696.546090] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
[ 5696.546092] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm), (0 s)
[ 5696.546094] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 6637.808066] wlan0: Connection to AP 80:37:73:15:8d:70 lost
[ 6637.845360] cfg80211: Calling CRDA to update world regulatory domain
[ 6637.849264] cfg80211: World regulatory domain updated:
[ 6637.849269] cfg80211:  DFS Master region: unset
[ 6637.849271] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 6637.849273] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 6637.849276] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 6637.849278] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 6637.849280] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 6637.849282] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 6638.944721] wlan0: authenticate with 80:37:73:15:8d:70
[ 6638.960288] wlan0: send auth to 80:37:73:15:8d:70 (try 1/3)
[ 6639.064068] wlan0: send auth to 80:37:73:15:8d:70 (try 2/3)
[ 6639.168049] wlan0: send auth to 80:37:73:15:8d:70 (try 3/3)
[ 6639.272048] wlan0: authentication with 80:37:73:15:8d:70 timed out
[ 6640.627258] wlan0: authenticate with 80:37:73:15:8d:70
[ 6640.647186] wlan0: send auth to 80:37:73:15:8d:70 (try 1/3)
[ 6640.652092] wlan0: authenticated
[ 6640.656182] wlan0: associate with 80:37:73:15:8d:70 (try 1/3)
[ 6640.662895] wlan0: RX AssocResp from 80:37:73:15:8d:70 (capab=0x411 status=0 aid=1)
[ 6640.664678] wlan0: associated
[ 6640.665341] cfg80211: Calling CRDA for country: GB
[ 6640.668349] cfg80211: Regulatory domain changed to country: GB
[ 6640.668353] cfg80211:  DFS Master region: unset
[ 6640.668355] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 6640.668357] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 6640.668359] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 6640.668362] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
[ 6640.668364] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm), (0 s)
[ 6640.668366] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 6652.674826] wlan0: deauthenticating from 80:37:73:15:8d:70 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 6652.707771] cfg80211: Calling CRDA to update world regulatory domain
[ 6652.711547] cfg80211: World regulatory domain updated:
[ 6652.711552] cfg80211:  DFS Master region: unset
[ 6652.711554] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 6652.711556] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 6652.711559] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 6652.711561] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 6652.711563] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 6652.711565] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 6654.416446] systemd-hostnamed[4082]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 6685.850888] wlan0: authenticate with 80:37:73:15:8d:70
[ 6685.861869] wlan0: send auth to 80:37:73:15:8d:70 (try 1/3)
[ 6685.964025] wlan0: send auth to 80:37:73:15:8d:70 (try 2/3)
[ 6685.972797] wlan0: authenticated
[ 6685.976187] wlan0: associate with 80:37:73:15:8d:70 (try 1/3)
[ 6685.986590] wlan0: RX AssocResp from 80:37:73:15:8d:70 (capab=0x411 status=0 aid=1)
[ 6685.988502] wlan0: associated
[ 6685.989185] cfg80211: Calling CRDA for country: GB
[ 6685.992602] cfg80211: Regulatory domain changed to country: GB
[ 6685.992607] cfg80211:  DFS Master region: unset
[ 6685.992609] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 6685.992611] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 6685.992613] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 6685.992615] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
[ 6685.992617] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm), (0 s)
[ 6685.992619] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 6711.056069] wlan0: Connection to AP 80:37:73:15:8d:70 lost
[ 6711.092111] cfg80211: Calling CRDA to update world regulatory domain
[ 6711.095459] cfg80211: World regulatory domain updated:
[ 6711.095464] cfg80211:  DFS Master region: unset
[ 6711.095466] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 6711.095468] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 6711.095471] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 6711.095473] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 6711.095475] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 6711.095477] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 6712.175187] wlan0: authenticate with 80:37:73:15:8d:70
[ 6712.187085] wlan0: send auth to 80:37:73:15:8d:70 (try 1/3)
[ 6712.193176] wlan0: authenticated
[ 6712.196073] wlan0: associate with 80:37:73:15:8d:70 (try 1/3)
[ 6712.300060] wlan0: associate with 80:37:73:15:8d:70 (try 2/3)
[ 6712.404058] wlan0: associate with 80:37:73:15:8d:70 (try 3/3)
[ 6712.508058] wlan0: association with 80:37:73:15:8d:70 timed out
[ 6713.863585] wlan0: authenticate with 80:37:73:15:8d:70
[ 6713.888265] wlan0: send auth to 80:37:73:15:8d:70 (try 1/3)
[ 6713.894106] wlan0: authenticated
[ 6713.896148] wlan0: associate with 80:37:73:15:8d:70 (try 1/3)
[ 6714.000073] wlan0: associate with 80:37:73:15:8d:70 (try 2/3)
[ 6714.104042] wlan0: associate with 80:37:73:15:8d:70 (try 3/3)
[ 6714.110051] wlan0: RX AssocResp from 80:37:73:15:8d:70 (capab=0x411 status=0 aid=1)
[ 6714.111817] wlan0: associated
[ 6714.113347] cfg80211: Calling CRDA for country: GB
[ 6714.120201] cfg80211: Regulatory domain changed to country: GB
[ 6714.120206] cfg80211:  DFS Master region: unset
[ 6714.120208] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 6714.120211] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 6714.120213] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 6714.120215] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
[ 6714.120217] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm), (0 s)
[ 6714.120219] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 6726.488138] wlan0: deauthenticated from 80:37:73:15:8d:70 (Reason: 6=CLASS2_FRAME_FROM_NONAUTH_STA)
[ 6726.499506] wlan0: authenticate with 80:37:73:15:8d:70
[ 6726.510222] wlan0: send auth to 80:37:73:15:8d:70 (try 1/3)
[ 6726.510416] cfg80211: Calling CRDA to update world regulatory domain
[ 6726.513897] cfg80211: World regulatory domain updated:
[ 6726.513902] cfg80211:  DFS Master region: unset
[ 6726.513903] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 6726.513906] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 6726.513908] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 6726.513910] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 6726.513912] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 6726.513914] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 6726.612047] wlan0: send auth to 80:37:73:15:8d:70 (try 2/3)
[ 6726.716047] wlan0: send auth to 80:37:73:15:8d:70 (try 3/3)
[ 6726.727035] wlan0: authenticated
[ 6726.728058] wlan0: associate with 80:37:73:15:8d:70 (try 1/3)
[ 6726.755676] wlan0: RX AssocResp from 80:37:73:15:8d:70 (capab=0x411 status=0 aid=1)
[ 6726.757353] wlan0: associated
[ 6726.758396] cfg80211: Calling CRDA for country: GB
[ 6726.761341] cfg80211: Regulatory domain changed to country: GB
[ 6726.761346] cfg80211:  DFS Master region: unset
[ 6726.761347] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 6726.761350] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 6726.761352] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 6726.761354] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
[ 6726.761356] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm), (0 s)
[ 6726.761358] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 6735.376074] wlan0: Connection to AP 80:37:73:15:8d:70 lost
[ 6735.411211] cfg80211: Calling CRDA to update world regulatory domain
[ 6735.414674] cfg80211: World regulatory domain updated:
[ 6735.414678] cfg80211:  DFS Master region: unset
[ 6735.414680] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 6735.414683] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 6735.414685] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 6735.414687] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 6735.414689] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 6735.414691] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 6736.494732] wlan0: authenticate with 80:37:73:15:8d:70
[ 6736.522122] wlan0: send auth to 80:37:73:15:8d:70 (try 1/3)
[ 6736.624053] wlan0: send auth to 80:37:73:15:8d:70 (try 2/3)
[ 6736.728045] wlan0: send auth to 80:37:73:15:8d:70 (try 3/3)
[ 6736.832046] wlan0: authentication with 80:37:73:15:8d:70 timed out
[ 6738.687650] wlan0: authenticate with 80:37:73:15:8d:70
[ 6738.700868] wlan0: send auth to 80:37:73:15:8d:70 (try 1/3)
[ 6738.804051] wlan0: send auth to 80:37:73:15:8d:70 (try 2/3)
[ 6738.908047] wlan0: send auth to 80:37:73:15:8d:70 (try 3/3)
[ 6739.017991] wlan0: authentication with 80:37:73:15:8d:70 timed out
[ 6750.708750] wlan0: authenticate with 80:37:73:15:8d:70
[ 6750.748109] wlan0: send auth to 80:37:73:15:8d:70 (try 1/3)
[ 6750.751294] wlan0: authenticated
[ 6750.752147] wlan0: associate with 80:37:73:15:8d:70 (try 1/3)
[ 6750.759479] wlan0: RX AssocResp from 80:37:73:15:8d:70 (capab=0x411 status=0 aid=1)
[ 6750.761188] wlan0: associated
[ 6750.762135] cfg80211: Calling CRDA for country: GB
[ 6750.768270] cfg80211: Regulatory domain changed to country: GB
[ 6750.768274] cfg80211:  DFS Master region: unset
[ 6750.768276] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 6750.768279] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 6750.768281] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 6750.768283] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
[ 6750.768285] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm), (0 s)
[ 6750.768287] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 6765.711077] wlan0: Connection to AP 80:37:73:15:8d:70 lost
[ 6765.742190] cfg80211: Calling CRDA to update world regulatory domain
[ 6765.747176] cfg80211: World regulatory domain updated:
[ 6765.747181] cfg80211:  DFS Master region: unset
[ 6765.747182] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 6765.747185] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 6765.747187] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 6765.747189] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 6765.747192] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 6765.747194] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 6766.830675] wlan0: authenticate with 80:37:73:15:8d:70
[ 6766.852523] wlan0: send auth to 80:37:73:15:8d:70 (try 1/3)
[ 6766.956061] wlan0: send auth to 80:37:73:15:8d:70 (try 2/3)
[ 6767.060058] wlan0: send auth to 80:37:73:15:8d:70 (try 3/3)
[ 6767.164040] wlan0: authentication with 80:37:73:15:8d:70 timed out
[ 6768.518866] wlan0: authenticate with 80:37:73:15:8d:70
[ 6768.533325] wlan0: send auth to 80:37:73:15:8d:70 (try 1/3)
[ 6768.636051] wlan0: send auth to 80:37:73:15:8d:70 (try 2/3)
[ 6768.740037] wlan0: send auth to 80:37:73:15:8d:70 (try 3/3)
[ 6768.844034] wlan0: authentication with 80:37:73:15:8d:70 timed out
[ 6770.699902] wlan0: authenticate with 80:37:73:15:8d:70
[ 6770.715961] wlan0: direct probe to 80:37:73:15:8d:70 (try 1/3)
[ 6770.916034] wlan0: direct probe to 80:37:73:15:8d:70 (try 2/3)
[ 6771.120046] wlan0: direct probe to 80:37:73:15:8d:70 (try 3/3)
[ 6771.324044] wlan0: authentication with 80:37:73:15:8d:70 timed out
[ 6795.951998] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6797.686595] wlan0: authenticate with 80:37:73:15:8d:70
[ 6797.697604] wlan0: send auth to 80:37:73:15:8d:70 (try 1/3)
[ 6797.804045] wlan0: send auth to 80:37:73:15:8d:70 (try 2/3)
[ 6797.908048] wlan0: send auth to 80:37:73:15:8d:70 (try 3/3)
[ 6798.012049] wlan0: authentication with 80:37:73:15:8d:70 timed out
[ 6798.048218] wlan0: authenticate with 80:37:73:15:8d:70
[ 6798.059988] wlan0: send auth to 80:37:73:15:8d:70 (try 1/3)
[ 6798.164040] wlan0: send auth to 80:37:73:15:8d:70 (try 2/3)
[ 6798.268047] wlan0: send auth to 80:37:73:15:8d:70 (try 3/3)
[ 6798.372051] wlan0: authentication with 80:37:73:15:8d:70 timed out
[ 6867.629250] r8169 0000:0e:00.0 eth0: link down
[ 6867.629342] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6867.784685] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6868.749503] wlan0: authenticate with 80:37:73:15:8d:70
[ 6868.759810] wlan0: send auth to 80:37:73:15:8d:70 (try 1/3)
[ 6868.763405] wlan0: authenticated
[ 6868.764114] wlan0: associate with 80:37:73:15:8d:70 (try 1/3)
[ 6868.868045] wlan0: associate with 80:37:73:15:8d:70 (try 2/3)
[ 6868.972056] wlan0: associate with 80:37:73:15:8d:70 (try 3/3)
[ 6869.076066] wlan0: association with 80:37:73:15:8d:70 timed out
[ 6870.036505] wlan0: authenticate with 80:37:73:15:8d:70
[ 6870.059220] wlan0: send auth to 80:37:73:15:8d:70 (try 1/3)
[ 6870.164036] wlan0: send auth to 80:37:73:15:8d:70 (try 2/3)
[ 6870.268036] wlan0: send auth to 80:37:73:15:8d:70 (try 3/3)
[ 6870.372048] wlan0: authentication with 80:37:73:15:8d:70 timed out
[ 6871.728346] wlan0: authenticate with 80:37:73:15:8d:70
[ 6871.747577] wlan0: send auth to 80:37:73:15:8d:70 (try 1/3)
[ 6871.848041] wlan0: send auth to 80:37:73:15:8d:70 (try 2/3)
[ 6871.952041] wlan0: send auth to 80:37:73:15:8d:70 (try 3/3)
[ 6872.056043] wlan0: authentication with 80:37:73:15:8d:70 timed out
[ 6873.910792] wlan0: authenticate with 80:37:73:15:8d:70
[ 6873.922052] wlan0: send auth to 80:37:73:15:8d:70 (try 1/3)
[ 6874.028030] wlan0: send auth to 80:37:73:15:8d:70 (try 2/3)
[ 6874.132037] wlan0: send auth to 80:37:73:15:8d:70 (try 3/3)
[ 6874.236033] wlan0: authentication with 80:37:73:15:8d:70 timed out
[ 6885.934566] wlan0: authenticate with 80:37:73:15:8d:70
[ 6885.946021] wlan0: send auth to 80:37:73:15:8d:70 (try 1/3)
[ 6886.048046] wlan0: send auth to 80:37:73:15:8d:70 (try 2/3)
[ 6886.152048] wlan0: send auth to 80:37:73:15:8d:70 (try 3/3)
[ 6886.256049] wlan0: authentication with 80:37:73:15:8d:70 timed out
[ 6894.918535] wlan0: authenticate with 80:37:73:15:8d:70
[ 6894.929649] wlan0: send auth to 80:37:73:15:8d:70 (try 1/3)
[ 6895.032050] wlan0: send auth to 80:37:73:15:8d:70 (try 2/3)
[ 6895.136049] wlan0: send auth to 80:37:73:15:8d:70 (try 3/3)
[ 6895.240045] wlan0: authentication with 80:37:73:15:8d:70 timed out
[ 6907.616933] wlan0: authenticate with 80:37:73:15:8d:70
[ 6907.633135] wlan0: send auth to 80:37:73:15:8d:70 (try 1/3)
[ 6907.736033] wlan0: send auth to 80:37:73:15:8d:70 (try 2/3)
[ 6907.840046] wlan0: send auth to 80:37:73:15:8d:70 (try 3/3)
[ 6907.944039] wlan0: authentication with 80:37:73:15:8d:70 timed out
[ 6918.798553] wlan0: authenticate with 80:37:73:15:8d:70
[ 6918.810163] wlan0: send auth to 80:37:73:15:8d:70 (try 1/3)
[ 6918.912046] wlan0: send auth to 80:37:73:15:8d:70 (try 2/3)
[ 6919.018026] wlan0: send auth to 80:37:73:15:8d:70 (try 3/3)
[ 6919.120053] wlan0: authentication with 80:37:73:15:8d:70 timed out
[ 6936.067227] wlan0: authenticate with 80:37:73:15:8d:70
[ 6936.077596] wlan0: send auth to 80:37:73:15:8d:70 (try 1/3)
[ 6936.180043] wlan0: send auth to 80:37:73:15:8d:70 (try 2/3)
[ 6936.284076] wlan0: send auth to 80:37:73:15:8d:70 (try 3/3)
[ 6936.388051] wlan0: authentication with 80:37:73:15:8d:70 timed out
[ 6947.251077] wlan0: authenticate with 80:37:73:15:8d:70
[ 6947.268532] wlan0: send auth to 80:37:73:15:8d:70 (try 1/3)
[ 6947.372066] wlan0: send auth to 80:37:73:15:8d:70 (try 2/3)
[ 6947.379532] wlan0: authenticated
[ 6947.380060] wlan0: associate with 80:37:73:15:8d:70 (try 1/3)
[ 6947.484053] wlan0: associate with 80:37:73:15:8d:70 (try 2/3)
[ 6947.491390] wlan0: RX AssocResp from 80:37:73:15:8d:70 (capab=0x411 status=0 aid=1)
[ 6947.493107] wlan0: associated
[ 6947.493118] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 6947.495571] cfg80211: Calling CRDA for country: GB
[ 6947.500307] cfg80211: Regulatory domain changed to country: GB
[ 6947.500312] cfg80211:  DFS Master region: unset
[ 6947.500313] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 6947.500316] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 6947.500318] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 6947.500320] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
[ 6947.500322] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm), (0 s)
[ 6947.500324] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)


Kod Seç Genişlet

c@c-Satellite-L500:~$ dmesg | tail
[ 6947.493118] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 6947.495571] cfg80211: Calling CRDA for country: GB
[ 6947.500307] cfg80211: Regulatory domain changed to country: GB
[ 6947.500312] cfg80211:  DFS Master region: unset
[ 6947.500313] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 6947.500316] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 6947.500318] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 6947.500320] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
[ 6947.500322] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm), (0 s)
[ 6947.500324] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)


[heartsmagic]

Sistem haliyle kartı destekliyor, iyi kötü kullanabiliyorsun yani. Uzaklık etki ediyor demek ki sürücüye, kötü bir durum. Realtek sürücü yayımlıyor haricen ancak ne yazık ki yeni çekirdeklerde o sürücü derlenemiyor. Bir gönüllü bu işi düzeltmeye çalışıyor bir süredir:
https://github.com/FreedomBen/rtl8188ce-linux-driver

Fakat, burada iyi destekleniyor dediği kartlar arasında seninki yok. 8192 var onun da CE sürümü var. Kafamı karıştırmıştır zaten hep Realtek kartlar benim. Kısacası buradaki sürücüyü kurarsak işler daha mı iyi olur daha mı kötü bilemiyorum. Gerçi düzeltmenin yolu var da, kablo ile gelip foruma sorman gerekebilir. Denerim diyorsan hiç emin olmamakla beraber:

Kod Seç Genişlet


sudo apt-get install git
git clone https://github.com/FreedomBen/rtl8188ce-linux-driver.git && cd rtl8188ce-linux-driver && ./install.sh


ile şansını deneyebilirsin. Çıktıları buraya geçmeyi unutma, sonra da sistemi yeniden başlatır bir şansını denersin.

[abbasc]

Kod Seç Genişlet

c@c-Satellite-L500:~$ sudo apt-get install git
[sudo] password for c:
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following packages were automatically installed and are no longer required:
  account-plugin-windows-live libupstart1
Use 'apt-get autoremove' to remove them.
The following extra packages will be installed:
  git-man liberror-perl
Suggested packages:
  git-daemon-run git-daemon-sysvinit git-doc git-el git-email git-gui gitk
  gitweb git-arch git-bzr git-cvs git-mediawiki git-svn
The following NEW packages will be installed
  git git-man liberror-perl
0 to upgrade, 3 to newly install, 0 to remove and 14 not to upgrade.
Need to get 3,230 kB of archives.
After this operation, 21.7 MB of additional disk space will be used.
Do you want to continue? [Y/n] y
Get:1 http://gb.archive.ubuntu.com/ubuntu/ trusty/main liberror-perl all 0.17-1.1 [21.1 kB]
Get:2 http://gb.archive.ubuntu.com/ubuntu/ trusty-updates/main git-man all 1:1.9.1-1ubuntu0.1 [698 kB]
Get:3 http://gb.archive.ubuntu.com/ubuntu/ trusty-updates/main git i386 1:1.9.1-1ubuntu0.1 [2,511 kB]
Fetched 3,230 kB in 13s (240 kB/s)                                             
Selecting previously unselected package liberror-perl.
(Reading database ... 215423 files and directories currently installed.)
Preparing to unpack .../liberror-perl_0.17-1.1_all.deb ...
Unpacking liberror-perl (0.17-1.1) ...
Selecting previously unselected package git-man.
Preparing to unpack .../git-man_1%3a1.9.1-1ubuntu0.1_all.deb ...
Unpacking git-man (1:1.9.1-1ubuntu0.1) ...
Selecting previously unselected package git.
Preparing to unpack .../git_1%3a1.9.1-1ubuntu0.1_i386.deb ...
Unpacking git (1:1.9.1-1ubuntu0.1) ...
Processing triggers for man-db (2.6.7.1-1ubuntu1) ...
Setting up liberror-perl (0.17-1.1) ...
Setting up git-man (1:1.9.1-1ubuntu0.1) ...
Setting up git (1:1.9.1-1ubuntu0.1) ...


Kod Seç Genişlet

c@c-Satellite-L500:~$ sudo apt-get install git
[sudo] password for c:
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following packages were automatically installed and are no longer required:
  account-plugin-windows-live libupstart1
Use 'apt-get autoremove' to remove them.
The following extra packages will be installed:
  git-man liberror-perl
Suggested packages:
  git-daemon-run git-daemon-sysvinit git-doc git-el git-email git-gui gitk
  gitweb git-arch git-bzr git-cvs git-mediawiki git-svn
The following NEW packages will be installed
  git git-man liberror-perl
0 to upgrade, 3 to newly install, 0 to remove and 14 not to upgrade.
Need to get 3,230 kB of archives.
After this operation, 21.7 MB of additional disk space will be used.
Do you want to continue? [Y/n] y
Get:1 http://gb.archive.ubuntu.com/ubuntu/ trusty/main liberror-perl all 0.17-1.1 [21.1 kB]
Get:2 http://gb.archive.ubuntu.com/ubuntu/ trusty-updates/main git-man all 1:1.9.1-1ubuntu0.1 [698 kB]
Get:3 http://gb.archive.ubuntu.com/ubuntu/ trusty-updates/main git i386 1:1.9.1-1ubuntu0.1 [2,511 kB]
Fetched 3,230 kB in 13s (240 kB/s)                                             
Selecting previously unselected package liberror-perl.
(Reading database ... 215423 files and directories currently installed.)
Preparing to unpack .../liberror-perl_0.17-1.1_all.deb ...
Unpacking liberror-perl (0.17-1.1) ...
Selecting previously unselected package git-man.
Preparing to unpack .../git-man_1%3a1.9.1-1ubuntu0.1_all.deb ...
Unpacking git-man (1:1.9.1-1ubuntu0.1) ...
Selecting previously unselected package git.
Preparing to unpack .../git_1%3a1.9.1-1ubuntu0.1_i386.deb ...
Unpacking git (1:1.9.1-1ubuntu0.1) ...
Processing triggers for man-db (2.6.7.1-1ubuntu1) ...
Setting up liberror-perl (0.17-1.1) ...
Setting up git-man (1:1.9.1-1ubuntu0.1) ...
Setting up git (1:1.9.1-1ubuntu0.1) ...
c@c-Satellite-L500:~$ git clone https://github.com/FreedomBen/rtl8188ce-linux-driver.git && cd rtl8188ce-linux-driver && ./install.sh
Cloning into 'rtl8188ce-linux-driver'...
remote: Counting objects: 5225, done.
remote: Total 5225 (delta 0), reused 0 (delta 0), pack-reused 5225
Receiving objects: 100% (5225/5225), 16.90 MiB | 659.00 KiB/s, done.
Resolving deltas: 100% (3937/3937), done.
Checking connectivity... done.

[*] So you want to live on the wild side and try a different driver for your RealTek wireless card eh?  Awesome!  I'll help you do it.

[*] We are going to build and install the driver from source code, compiled specifically for your machine.

[*] If you want to do the build/install manually, there are instructions in the "README.md" file.

[*] Please report any bugs/problems at https://github.com/FreedomBen/rtl8188ce-linux-driver

[*] You will need sudo privileges in order to complete this install.
[*] Press <Enter> when ready to begin, or <Ctrl+C> to quit

[*] Let's install any dependencies you will need in order to build the driver.
Reading package lists... Done
Building dependency tree       
Reading state information... Done
gcc is already the newest version.
linux-headers-3.16.0-40-generic is already the newest version.
linux-headers-3.16.0-40-generic set to manually installed.
The following packages were automatically installed and are no longer required:
  account-plugin-windows-live libupstart1
Use 'apt-get autoremove' to remove them.
The following extra packages will be installed:
  dpkg-dev fakeroot g++ g++-4.8 libalgorithm-diff-perl
  libalgorithm-diff-xs-perl libalgorithm-merge-perl libfakeroot
  libstdc++-4.8-dev
Suggested packages:
  debian-keyring g++-multilib g++-4.8-multilib gcc-4.8-doc libstdc++6-4.8-dbg
  libstdc++-4.8-doc
The following NEW packages will be installed
  build-essential dpkg-dev fakeroot g++ g++-4.8 libalgorithm-diff-perl
  libalgorithm-diff-xs-perl libalgorithm-merge-perl libfakeroot
  libstdc++-4.8-dev
0 to upgrade, 10 to newly install, 0 to remove and 14 not to upgrade.
Need to get 8,970 kB of archives.
After this operation, 30.7 MB of additional disk space will be used.
Get:1 http://gb.archive.ubuntu.com/ubuntu/ trusty/main libstdc++-4.8-dev i386 4.8.2-19ubuntu1 [1,058 kB]
Get:2 http://gb.archive.ubuntu.com/ubuntu/ trusty/main g++-4.8 i386 4.8.2-19ubuntu1 [7,023 kB]
Get:3 http://gb.archive.ubuntu.com/ubuntu/ trusty/main g++ i386 4:4.8.2-1ubuntu6 [1,500 B]
Get:4 http://gb.archive.ubuntu.com/ubuntu/ trusty-updates/main dpkg-dev all 1.17.5ubuntu5.4 [726 kB]
Get:5 http://gb.archive.ubuntu.com/ubuntu/ trusty/main build-essential i386 11.6ubuntu6 [4,824 B]
Get:6 http://gb.archive.ubuntu.com/ubuntu/ trusty/main libfakeroot i386 1.20-3ubuntu2 [25.4 kB]
Get:7 http://gb.archive.ubuntu.com/ubuntu/ trusty/main fakeroot i386 1.20-3ubuntu2 [55.4 kB]
Get:8 http://gb.archive.ubuntu.com/ubuntu/ trusty/main libalgorithm-diff-perl all 1.19.02-3 [50.0 kB]
Get:9 http://gb.archive.ubuntu.com/ubuntu/ trusty/main libalgorithm-diff-xs-perl i386 0.04-2build4 [13.1 kB]
Get:10 http://gb.archive.ubuntu.com/ubuntu/ trusty/main libalgorithm-merge-perl all 0.08-2 [12.7 kB]
Fetched 8,970 kB in 23s (378 kB/s)                                             
Selecting previously unselected package libstdc++-4.8-dev:i386.
(Reading database ... 216171 files and directories currently installed.)
Preparing to unpack .../libstdc++-4.8-dev_4.8.2-19ubuntu1_i386.deb ...
Unpacking libstdc++-4.8-dev:i386 (4.8.2-19ubuntu1) ...
Selecting previously unselected package g++-4.8.
Preparing to unpack .../g++-4.8_4.8.2-19ubuntu1_i386.deb ...
Unpacking g++-4.8 (4.8.2-19ubuntu1) ...
Selecting previously unselected package g++.
Preparing to unpack .../g++_4%3a4.8.2-1ubuntu6_i386.deb ...
Unpacking g++ (4:4.8.2-1ubuntu6) ...
Selecting previously unselected package dpkg-dev.
Preparing to unpack .../dpkg-dev_1.17.5ubuntu5.4_all.deb ...
Unpacking dpkg-dev (1.17.5ubuntu5.4) ...
Selecting previously unselected package build-essential.
Preparing to unpack .../build-essential_11.6ubuntu6_i386.deb ...
Unpacking build-essential (11.6ubuntu6) ...
Selecting previously unselected package libfakeroot:i386.
Preparing to unpack .../libfakeroot_1.20-3ubuntu2_i386.deb ...
Unpacking libfakeroot:i386 (1.20-3ubuntu2) ...
Selecting previously unselected package fakeroot.
Preparing to unpack .../fakeroot_1.20-3ubuntu2_i386.deb ...
Unpacking fakeroot (1.20-3ubuntu2) ...
Selecting previously unselected package libalgorithm-diff-perl.
Preparing to unpack .../libalgorithm-diff-perl_1.19.02-3_all.deb ...
Unpacking libalgorithm-diff-perl (1.19.02-3) ...
Selecting previously unselected package libalgorithm-diff-xs-perl.
Preparing to unpack .../libalgorithm-diff-xs-perl_0.04-2build4_i386.deb ...
Unpacking libalgorithm-diff-xs-perl (0.04-2build4) ...
Selecting previously unselected package libalgorithm-merge-perl.
Preparing to unpack .../libalgorithm-merge-perl_0.08-2_all.deb ...
Unpacking libalgorithm-merge-perl (0.08-2) ...
Processing triggers for man-db (2.6.7.1-1ubuntu1) ...
Setting up libstdc++-4.8-dev:i386 (4.8.2-19ubuntu1) ...
Setting up g++-4.8 (4.8.2-19ubuntu1) ...
Setting up g++ (4:4.8.2-1ubuntu6) ...
update-alternatives: using /usr/bin/g++ to provide /usr/bin/c++ (c++) in auto mode
Setting up dpkg-dev (1.17.5ubuntu5.4) ...
Setting up build-essential (11.6ubuntu6) ...
Setting up libfakeroot:i386 (1.20-3ubuntu2) ...
Setting up fakeroot (1.20-3ubuntu2) ...
update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot (fakeroot) in auto mode
Setting up libalgorithm-diff-perl (1.19.02-3) ...
Setting up libalgorithm-diff-xs-perl (0.04-2build4) ...
Setting up libalgorithm-merge-perl (0.08-2) ...
Reading package lists... Done
Building dependency tree       
Reading state information... Done
git is already the newest version.
The following packages were automatically installed and are no longer required:
  account-plugin-windows-live libupstart1
Use 'apt-get autoremove' to remove them.
0 to upgrade, 0 to newly install, 0 to remove and 14 not to upgrade.

[*] Now let's compile the driver from source and copy the files to the right directories
if [ -e verify_branch.sh ] ; \
then \
    ./verify_branch.sh ; \
fi;
Verifying a sane branch for your kernel version...
No (Current branch master)
Recommended branch is ubuntu-14.10 based on your kernel version (3.16.0-40-generic)
Should I switch it to ubuntu-14.10 for you?  (y/n): ^Cmake: *** [all] Interrupt

c@c-Satellite-L500:~/rtl8188ce-linux-driver$
c@c-Satellite-L500:~/rtl8188ce-linux-driver$ n
n: command not found
c@c-Satellite-L500:~/rtl8188ce-linux-driver$ y
y: command not found
c@c-Satellite-L500:~/rtl8188ce-linux-driver$ git clone https://github.com/FreedomBen/rtl8188ce-linux-driver.git && cd rtl8188ce-linux-driver && ./install.sh
Cloning into 'rtl8188ce-linux-driver'...
remote: Counting objects: 5225, done.
remote: Total 5225 (delta 0), reused 0 (delta 0), pack-reused 5225
Receiving objects: 100% (5225/5225), 16.90 MiB | 643.00 KiB/s, done.
Resolving deltas: 100% (3937/3937), done.
Checking connectivity... done.

[*] So you want to live on the wild side and try a different driver for your RealTek wireless card eh?  Awesome!  I'll help you do it.

[*] We are going to build and install the driver from source code, compiled specifically for your machine.

[*] If you want to do the build/install manually, there are instructions in the "README.md" file.

[*] Please report any bugs/problems at https://github.com/FreedomBen/rtl8188ce-linux-driver

[*] You will need sudo privileges in order to complete this install.
[*] Press <Enter> when ready to begin, or <Ctrl+C> to quit

[*] Let's install any dependencies you will need in order to build the driver.
Reading package lists... Done
Building dependency tree       
Reading state information... Done
build-essential is already the newest version.
gcc is already the newest version.
linux-headers-3.16.0-40-generic is already the newest version.
The following packages were automatically installed and are no longer required:
  account-plugin-windows-live libupstart1
Use 'apt-get autoremove' to remove them.
0 to upgrade, 0 to newly install, 0 to remove and 14 not to upgrade.
Reading package lists... Done
Building dependency tree       
Reading state information... Done
git is already the newest version.
The following packages were automatically installed and are no longer required:
  account-plugin-windows-live libupstart1
Use 'apt-get autoremove' to remove them.
0 to upgrade, 0 to newly install, 0 to remove and 14 not to upgrade.

[*] Now let's compile the driver from source and copy the files to the right directories
if [ -e verify_branch.sh ] ; \
then \
    ./verify_branch.sh ; \
fi;
Verifying a sane branch for your kernel version...
No (Current branch master)
Recommended branch is ubuntu-14.10 based on your kernel version (3.16.0-40-generic)
Should I switch it to ubuntu-14.10 for you?  (y/n): n
OK, but if the build fails come back here and try again.
Continue with the build? (Y/N): y
make -C /lib/modules/3.16.0-40-generic/build M=/home/c/rtl8188ce-linux-driver/rtl8188ce-linux-driver modules
make[1]: Entering directory `/usr/src/linux-headers-3.16.0-40-generic'
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8188ce-linux-driver/base.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8188ce-linux-driver/usb.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8188ce-linux-driver/rc.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8188ce-linux-driver/debug.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8188ce-linux-driver/regd.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8188ce-linux-driver/efuse.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8188ce-linux-driver/cam.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8188ce-linux-driver/ps.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8188ce-linux-driver/core.o
/home/c/rtl8188ce-linux-driver/rtl8188ce-linux-driver/core.c:1878:2: warning: initialization from incompatible pointer type [enabled by default]
  .sw_scan_start = rtl_op_sw_scan_start,
  ^
/home/c/rtl8188ce-linux-driver/rtl8188ce-linux-driver/core.c:1878:2: warning: (near initialization for 'rtl_ops.sw_scan_start') [enabled by default]
/home/c/rtl8188ce-linux-driver/rtl8188ce-linux-driver/core.c:1879:2: warning: initialization from incompatible pointer type [enabled by default]
  .sw_scan_complete = rtl_op_sw_scan_complete,
  ^
/home/c/rtl8188ce-linux-driver/rtl8188ce-linux-driver/core.c:1879:2: warning: (near initialization for 'rtl_ops.sw_scan_complete') [enabled by default]
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8188ce-linux-driver/stats.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8188ce-linux-driver/pci.o
/home/c/rtl8188ce-linux-driver/rtl8188ce-linux-driver/pci.c: In function '_rtl_pci_init_tx_ring':
/home/c/rtl8188ce-linux-driver/rtl8188ce-linux-driver/pci.c:1266:6: error: implicit declaration of function 'pci_zalloc_consistent' [-Werror=implicit-function-declaration]
      pci_zalloc_consistent( rtlpci->pdev,
      ^
/home/c/rtl8188ce-linux-driver/rtl8188ce-linux-driver/pci.c:1265:15: warning: assignment makes pointer from integer without a cast [enabled by default]
   buffer_desc =
               ^
/home/c/rtl8188ce-linux-driver/rtl8188ce-linux-driver/pci.c:1286:7: warning: assignment makes pointer from integer without a cast [enabled by default]
  desc = pci_zalloc_consistent( rtlpci->pdev,
       ^
/home/c/rtl8188ce-linux-driver/rtl8188ce-linux-driver/pci.c: In function '_rtl_pci_init_rx_ring':
/home/c/rtl8188ce-linux-driver/rtl8188ce-linux-driver/pci.c:1330:43: warning: assignment makes pointer from integer without a cast [enabled by default]
   rtlpci->rx_ring[rxring_idx].buffer_desc =
                                           ^
/home/c/rtl8188ce-linux-driver/rtl8188ce-linux-driver/pci.c:1355:36: warning: assignment makes pointer from integer without a cast [enabled by default]
   rtlpci->rx_ring[rxring_idx].desc =
                                    ^
cc1: some warnings being treated as errors
make[2]: *** [/home/c/rtl8188ce-linux-driver/rtl8188ce-linux-driver/pci.o] Error 1
make[1]: *** [_module_/home/c/rtl8188ce-linux-driver/rtl8188ce-linux-driver] Error 2
make[1]: Leaving directory `/usr/src/linux-headers-3.16.0-40-generic'
make: *** [all] Error 2
[*] The build has failed! Please make sure you have all dependencies installed and you are building on the correct branch (kernel version, not linux distro version, is most important for the branch)
c@c-Satellite-L500:~/rtl8188ce-linux-driver/rtl8188ce-linux-driver$



galiba 14.10 surumune gecmemi istiyor. Aksi halde bu isi yapamayacagiz diyor sanirsam ?

[heartsmagic]

Sana geç demiyor orada, kendisi 14.10'a göre bir şeyler yapmayı planlıyor. Çekirdek sürümünden dolayı öyle yorumluyor. O soruya da "y" deyip tekrar bir dener misin? Gerçi derleme sorun vermiş, bir ihtimal 14.10 ağacında bir şeyleri değiştirmiştir geliştirici.

Şimdi biraz bakındım da, senin Ubuntu sürümü 14.04 ise çekirdek sürümünü 3.13 olarak kabul ediyor. 14.04, 3.16'ya kadar geldi mi bilemiyorum şu an.
Gelmiş gibi:
http://packages.ubuntu.com/search?keywords=linux-image&searchon=names&suite=trusty&section=all
Hatta 3.19 da görmüş gibi. Karışıklık burada olabilir, pek emin değilim ama.

Ben bir elle derlemeyi deneyeyim, bakalım neler olacak. Ubuntu için listeyi şöyle vermiş:

Kod Seç Genişlet

Release ver. | *Kernel ver.  | Branch Name
    --------------------------------------------
    Ubuntu 12.04 | Kernel 3.2.x  | ubuntu-12.04
    Ubuntu 13.04 | Kernel 3.8.x  | ubuntu-13.04
    Ubuntu 13.10 | Kernel 3.11.x | ubuntu-13.10
    Ubuntu 14.04 | Kernel 3.13.x | ubuntu-14.04
    Ubuntu 14.10 | Kernel 3.16.x | ubuntu-14.10
    Ubuntu 15.04 | Kernel 3.19.x | ubuntu-15.04

Elle derlendi bende. Sürümüm 15.04, çekirdek sürümüm 3.19x. Haliyle benim sürümü doğru algıladı. Sendeki çekirdek meselesinden dolayı yanlış algılıyor gibi. Dediğim gibi soruya olumlu cevap verip bir dene. O çekirdeğe göre düzeltmeler yapıyordur diye umuyorum.

[abbasc]

boyle bisey diyor :

Kod Seç Genişlet

c@c-Satellite-L500:~$ git clone https://github.com/FreedomBen/rtl8188ce-linux-driver.git && cd rtl8188ce-linux-driver && ./install.sh
fatal: destination path 'rtl8188ce-linux-driver' already exists and is not an empty directory.


elle derlemek nasil olacak? ne yapmam gerekiyor)

[if]

Kod Seç Genişlet

cd ~/rtl8188ce-linux-driver
./install.sh
ile devam edin.

[abbasc]

Kod Seç Genişlet

c@c-Satellite-L500:~$ cd ~/rtl8188ce-linux-driver
c@c-Satellite-L500:~/rtl8188ce-linux-driver$ ./install.sh

[*] So you want to live on the wild side and try a different driver for your RealTek wireless card eh?  Awesome!  I'll help you do it.

[*] We are going to build and install the driver from source code, compiled specifically for your machine.

[*] If you want to do the build/install manually, there are instructions in the "README.md" file.

[*] Please report any bugs/problems at https://github.com/FreedomBen/rtl8188ce-linux-driver

[*] You will need sudo privileges in order to complete this install.
[*] Press <Enter> when ready to begin, or <Ctrl+C> to quit

[*] Let's install any dependencies you will need in order to build the driver.
[sudo] password for c:
Reading package lists... Done
Building dependency tree       
Reading state information... Done
build-essential is already the newest version.
gcc is already the newest version.
linux-headers-3.16.0-40-generic is already the newest version.
The following packages were automatically installed and are no longer required:
  account-plugin-windows-live libupstart1
Use 'apt-get autoremove' to remove them.
0 to upgrade, 0 to newly install, 0 to remove and 26 not to upgrade.
Reading package lists... Done
Building dependency tree       
Reading state information... Done
git is already the newest version.
The following packages were automatically installed and are no longer required:
  account-plugin-windows-live libupstart1
Use 'apt-get autoremove' to remove them.
0 to upgrade, 0 to newly install, 0 to remove and 26 not to upgrade.

[*] Now let's compile the driver from source and copy the files to the right directories
if [ -e verify_branch.sh ] ; \
then \
    ./verify_branch.sh ; \
fi;
Verifying a sane branch for your kernel version...
No (Current branch master)
Recommended branch is ubuntu-14.10 based on your kernel version (3.16.0-40-generic)
Should I switch it to ubuntu-14.10 for you?  (y/n): y
Branch ubuntu-14.10 set up to track remote branch ubuntu-14.10 from origin.
Switched to a new branch 'ubuntu-14.10'
make -C /lib/modules/3.16.0-40-generic/build M=/home/c/rtl8188ce-linux-driver modules
make[1]: Entering directory `/usr/src/linux-headers-3.16.0-40-generic'
  CC [M]  /home/c/rtl8188ce-linux-driver/base.o
  CC [M]  /home/c/rtl8188ce-linux-driver/usb.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rc.o
  CC [M]  /home/c/rtl8188ce-linux-driver/debug.o
  CC [M]  /home/c/rtl8188ce-linux-driver/regd.o
  CC [M]  /home/c/rtl8188ce-linux-driver/efuse.o
  CC [M]  /home/c/rtl8188ce-linux-driver/cam.o
  CC [M]  /home/c/rtl8188ce-linux-driver/ps.o
  CC [M]  /home/c/rtl8188ce-linux-driver/core.o
  CC [M]  /home/c/rtl8188ce-linux-driver/stats.o
  CC [M]  /home/c/rtl8188ce-linux-driver/pci.o
  LD [M]  /home/c/rtl8188ce-linux-driver/rtlwifi.o
  Building modules, stage 2.
  MODPOST 1 modules
  CC      /home/c/rtl8188ce-linux-driver/rtlwifi.mod.o
  LD [M]  /home/c/rtl8188ce-linux-driver/rtlwifi.ko
make[1]: Leaving directory `/usr/src/linux-headers-3.16.0-40-generic'
make[1]: Entering directory `/home/c/rtl8188ce-linux-driver/rtl8192c'
make -C /lib/modules/3.16.0-40-generic/build M=/home/c/rtl8188ce-linux-driver/rtl8192c modules
make[2]: Entering directory `/usr/src/linux-headers-3.16.0-40-generic'
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8192c/main.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8192c/dm_common.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8192c/fw_common.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8192c/phy_common.o
  LD [M]  /home/c/rtl8188ce-linux-driver/rtl8192c/rtl8192c_common.o
  Building modules, stage 2.
  MODPOST 1 modules
  CC      /home/c/rtl8188ce-linux-driver/rtl8192c/rtl8192c_common.mod.o
  LD [M]  /home/c/rtl8188ce-linux-driver/rtl8192c/rtl8192c_common.ko
make[2]: Leaving directory `/usr/src/linux-headers-3.16.0-40-generic'
make[1]: Leaving directory `/home/c/rtl8188ce-linux-driver/rtl8192c'
make[1]: Entering directory `/home/c/rtl8188ce-linux-driver/rtl8192ce'
make -C /lib/modules/3.16.0-40-generic/build M=/home/c/rtl8188ce-linux-driver/rtl8192ce modules
make[2]: Entering directory `/usr/src/linux-headers-3.16.0-40-generic'
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8192ce/hw.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8192ce/table.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8192ce/sw.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8192ce/trx.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8192ce/led.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8192ce/phy.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8192ce/rf.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8192ce/dm.o
  LD [M]  /home/c/rtl8188ce-linux-driver/rtl8192ce/rtl8192ce.o
  Building modules, stage 2.
  MODPOST 1 modules
  CC      /home/c/rtl8188ce-linux-driver/rtl8192ce/rtl8192ce.mod.o
  LD [M]  /home/c/rtl8188ce-linux-driver/rtl8192ce/rtl8192ce.ko
make[2]: Leaving directory `/usr/src/linux-headers-3.16.0-40-generic'
make[1]: Leaving directory `/home/c/rtl8188ce-linux-driver/rtl8192ce'
make[1]: Entering directory `/home/c/rtl8188ce-linux-driver/rtl8192cu'
make -C /lib/modules/3.16.0-40-generic/build M=/home/c/rtl8188ce-linux-driver/rtl8192cu modules
make[2]: Entering directory `/usr/src/linux-headers-3.16.0-40-generic'
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8192cu/dm.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8192cu/hw.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8192cu/led.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8192cu/mac.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8192cu/phy.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8192cu/rf.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8192cu/sw.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8192cu/table.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8192cu/trx.o
  LD [M]  /home/c/rtl8188ce-linux-driver/rtl8192cu/rtl8192cu.o
  Building modules, stage 2.
  MODPOST 1 modules
  CC      /home/c/rtl8188ce-linux-driver/rtl8192cu/rtl8192cu.mod.o
  LD [M]  /home/c/rtl8188ce-linux-driver/rtl8192cu/rtl8192cu.ko
make[2]: Leaving directory `/usr/src/linux-headers-3.16.0-40-generic'
make[1]: Leaving directory `/home/c/rtl8188ce-linux-driver/rtl8192cu'
make[1]: Entering directory `/home/c/rtl8188ce-linux-driver/rtl8192se'
make -C /lib/modules/3.16.0-40-generic/build M=/home/c/rtl8188ce-linux-driver/rtl8192se modules
make[2]: Entering directory `/usr/src/linux-headers-3.16.0-40-generic'
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8192se/hw.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8192se/table.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8192se/sw.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8192se/trx.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8192se/led.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8192se/fw.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8192se/phy.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8192se/rf.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8192se/dm.o
  LD [M]  /home/c/rtl8188ce-linux-driver/rtl8192se/rtl8192se.o
  Building modules, stage 2.
  MODPOST 1 modules
  CC      /home/c/rtl8188ce-linux-driver/rtl8192se/rtl8192se.mod.o
  LD [M]  /home/c/rtl8188ce-linux-driver/rtl8192se/rtl8192se.ko
make[2]: Leaving directory `/usr/src/linux-headers-3.16.0-40-generic'
make[1]: Leaving directory `/home/c/rtl8188ce-linux-driver/rtl8192se'
make[1]: Entering directory `/home/c/rtl8188ce-linux-driver/rtl8192de'
make -C /lib/modules/3.16.0-40-generic/build M=/home/c/rtl8188ce-linux-driver/rtl8192de modules
make[2]: Entering directory `/usr/src/linux-headers-3.16.0-40-generic'
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8192de/hw.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8192de/table.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8192de/sw.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8192de/trx.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8192de/led.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8192de/fw.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8192de/phy.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8192de/rf.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8192de/dm.o
  LD [M]  /home/c/rtl8188ce-linux-driver/rtl8192de/rtl8192de.o
  Building modules, stage 2.
  MODPOST 1 modules
  CC      /home/c/rtl8188ce-linux-driver/rtl8192de/rtl8192de.mod.o
  LD [M]  /home/c/rtl8188ce-linux-driver/rtl8192de/rtl8192de.ko
make[2]: Leaving directory `/usr/src/linux-headers-3.16.0-40-generic'
make[1]: Leaving directory `/home/c/rtl8188ce-linux-driver/rtl8192de'
make[1]: Entering directory `/home/c/rtl8188ce-linux-driver/rtl8188ee'
make -C /lib/modules/3.16.0-40-generic/build M=/home/c/rtl8188ce-linux-driver/rtl8188ee modules
make[2]: Entering directory `/usr/src/linux-headers-3.16.0-40-generic'
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8188ee/hw.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8188ee/table.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8188ee/sw.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8188ee/trx.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8188ee/led.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8188ee/fw.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8188ee/phy.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8188ee/rf.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8188ee/dm.o
  CC [M]  /home/c/rtl8188ce-linux-driver/rtl8188ee/pwrseq.o
  LD [M]  /home/c/rtl8188ce-linux-driver/rtl8188ee/rtl8188ee.o
  Building modules, stage 2.
  MODPOST 1 modules
  CC      /home/c/rtl8188ce-linux-driver/rtl8188ee/rtl8188ee.mod.o
  LD [M]  /home/c/rtl8188ce-linux-driver/rtl8188ee/rtl8188ee.ko
make[2]: Leaving directory `/usr/src/linux-headers-3.16.0-40-generic'
make[1]: Leaving directory `/home/c/rtl8188ce-linux-driver/rtl8188ee'
if [ -e verify_branch.sh ] ; \
then \
    ./verify_branch.sh ; \
fi;
Verifying a sane branch for your kernel version...
Yes
make -C /lib/modules/3.16.0-40-generic/build M=/home/c/rtl8188ce-linux-driver modules
make[1]: Entering directory `/usr/src/linux-headers-3.16.0-40-generic'
  Building modules, stage 2.
  MODPOST 1 modules
make[1]: Leaving directory `/usr/src/linux-headers-3.16.0-40-generic'
make[1]: Entering directory `/home/c/rtl8188ce-linux-driver/rtl8192c'
make -C /lib/modules/3.16.0-40-generic/build M=/home/c/rtl8188ce-linux-driver/rtl8192c modules
make[2]: Entering directory `/usr/src/linux-headers-3.16.0-40-generic'
  Building modules, stage 2.
  MODPOST 1 modules
make[2]: Leaving directory `/usr/src/linux-headers-3.16.0-40-generic'
make[1]: Leaving directory `/home/c/rtl8188ce-linux-driver/rtl8192c'
make[1]: Entering directory `/home/c/rtl8188ce-linux-driver/rtl8192ce'
make -C /lib/modules/3.16.0-40-generic/build M=/home/c/rtl8188ce-linux-driver/rtl8192ce modules
make[2]: Entering directory `/usr/src/linux-headers-3.16.0-40-generic'
  Building modules, stage 2.
  MODPOST 1 modules
make[2]: Leaving directory `/usr/src/linux-headers-3.16.0-40-generic'
make[1]: Leaving directory `/home/c/rtl8188ce-linux-driver/rtl8192ce'
make[1]: Entering directory `/home/c/rtl8188ce-linux-driver/rtl8192cu'
make -C /lib/modules/3.16.0-40-generic/build M=/home/c/rtl8188ce-linux-driver/rtl8192cu modules
make[2]: Entering directory `/usr/src/linux-headers-3.16.0-40-generic'
  Building modules, stage 2.
  MODPOST 1 modules
make[2]: Leaving directory `/usr/src/linux-headers-3.16.0-40-generic'
make[1]: Leaving directory `/home/c/rtl8188ce-linux-driver/rtl8192cu'
make[1]: Entering directory `/home/c/rtl8188ce-linux-driver/rtl8192se'
make -C /lib/modules/3.16.0-40-generic/build M=/home/c/rtl8188ce-linux-driver/rtl8192se modules
make[2]: Entering directory `/usr/src/linux-headers-3.16.0-40-generic'
  Building modules, stage 2.
  MODPOST 1 modules
make[2]: Leaving directory `/usr/src/linux-headers-3.16.0-40-generic'
make[1]: Leaving directory `/home/c/rtl8188ce-linux-driver/rtl8192se'
make[1]: Entering directory `/home/c/rtl8188ce-linux-driver/rtl8192de'
make -C /lib/modules/3.16.0-40-generic/build M=/home/c/rtl8188ce-linux-driver/rtl8192de modules
make[2]: Entering directory `/usr/src/linux-headers-3.16.0-40-generic'
  Building modules, stage 2.
  MODPOST 1 modules
make[2]: Leaving directory `/usr/src/linux-headers-3.16.0-40-generic'
make[1]: Leaving directory `/home/c/rtl8188ce-linux-driver/rtl8192de'
make[1]: Entering directory `/home/c/rtl8188ce-linux-driver/rtl8188ee'
make -C /lib/modules/3.16.0-40-generic/build M=/home/c/rtl8188ce-linux-driver/rtl8188ee modules
make[2]: Entering directory `/usr/src/linux-headers-3.16.0-40-generic'
  Building modules, stage 2.
  MODPOST 1 modules
make[2]: Leaving directory `/usr/src/linux-headers-3.16.0-40-generic'
make[1]: Leaving directory `/home/c/rtl8188ce-linux-driver/rtl8188ee'
if [ -e backup_existing.sh ] ; \
then \
    ./backup_existing.sh ; \
fi;
find /lib/modules/3.16.0-40-generic -name "r8192se_*.ko" -exec rm {} \;
find /lib/modules/3.16.0-40-generic -name "r8192ce_*.ko" -exec rm {} \;
find /lib/modules/3.16.0-40-generic -name "r8192cu_*.ko" -exec rm {} \;
find /lib/modules/3.16.0-40-generic -name "r8723e_*.ko" -exec rm {} \;
find /lib/modules/3.16.0-40-generic -name "r8188ee_*.ko" -exec rm {} \;
if [ -e update_modprobe_conf.sh ] ; \
then \
    ./update_modprobe_conf.sh ; \
fi;
Power save disable only support rtl8188ce and rtl8192ce currently
[*] Is your wireless card either the RTL8188CE or RTL8192CE? (Y/N):


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 17 Haziran 2015 - 14:33:11

Kod Seç Genişlet

Power save disable only support rtl8188ce and rtl8192ce currently
[*] Is your wireless card either the RTL8188CE or RTL8192CE? (Y/N): n       
[*] OK, reboot and you should be running the new driver.  To check, run the script "am_i_using_this_driver.sh"
c@c-Satellite-L500:~/rtl8188ce-linux-driver$


[abbasc]

kurulum basarili oldu mu anlamadim ama malesef durum ayni

[heartsmagic]

Başarılı olmuş gibi görünüyor. Ne yazık ki başka bir önerim yok bu konuda şimdilik. Bağlantı kopma sorunu gibi sorunlarda farklı şeylere yönelebiliyoruz ama sendeki sanki biraz çekim gücü meselesi gibi.

[siberoloji]

Modem ayarlarından sinyal çıkış gücünü ve kanalı auto dışında bir kanala ayarlamayı deneyebilirsiniz.

[abbasc]

Bir de modem Ayarlarini deneyecegim.

[if]

@abbasc, şunu bir deneyin

Kod Seç Genişlet


echo "options rtl8192se ips=0 fwlps=0" | sudo tee /etc/modprobe.d/rtl8192se.conf
sudo modprobe -r rtl8192se
sudo modprobe rtl8192
sudo systemctl restart network-manager


[abbasc]

Kod Seç Genişlet

c@c-Satellite-L500:~$ echo "options rtl8192se ips=0 fwlps=0" | sudo tee /etc/modprobe.d/rtl8192se.conf
[sudo] password for c:
options rtl8192se ips=0 fwlps=0
c@c-Satellite-L500:~$ sudo modprobe -r rtl8192se
c@c-Satellite-L500:~$ sudo modprobe rtl8192
modprobe: FATAL: Module rtl8192 not found.
c@c-Satellite-L500:~$ sudo systemctl restart network-manager
sudo: systemctl: command not found
c@c-Satellite-L500:~$

degisen bir sey yok malesef

[if]

Kod Seç Genişlet


sudo modprobe rtl8192se
olacaktı komut @abbasc. Öyle deneyin bir de.

[abbasc]

Kod Seç Genişlet

c@c-Satellite-L500:~$ echo "options rtl8192se ips=0 fwlps=0" | sudo tee /etc/modprobe.d/rtl8192se.conf
[sudo] password for c:
options rtl8192se ips=0 fwlps=0
c@c-Satellite-L500:~$ sudo modprobe rtl8192se
c@c-Satellite-L500:~$ sudo modprobe rtl8192
modprobe: FATAL: Module rtl8192 not found.


bir de bu sekilde denedim:

Kod Seç Genişlet

c@c-Satellite-L500:~$ echo "options rtl8192se ips=0 fwlps=0" | sudo tee /etc/modprobe.d/rtl8192se.conf
[sudo] password for c:
options rtl8192se ips=0 fwlps=0
c@c-Satellite-L500:~$ sudo modprobe -r rtl8192se
c@c-Satellite-L500:~$ sudo modprobe rtl8192se
c@c-Satellite-L500:~$ sudo systemctl restart network-manager
sudo: systemctl: command not found
c@c-Satellite-L500:~$
c@c-Satellite-L500:~$



ama bunlar internet baglantisini kesiyor ve baglanamiyor, tekrar baglanabilmem icin laptopu yeniden baslatmam gerekiyor

[if]

Yeniden başlattıktan sonra hâlâ kararsız mı bağlantı @abbasc?

[abbasc]

bir muddet sonra belli oluyor. Biraz beklemek gerekiyor. 10-15 dakika.
Bir sure sonra tekrar yazacagim


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 21 Haziran 2015 - 19:12:51
malesef ki durum ayni
yapacak bir seyimiz yok belki. Wireless in yaninda cok iyi cekiyor ama odama gelince yavasliyor ve  bir muddet (20 dakika gibi bisey) sonra kopuyor.
baglantiyi kes, tekrar baglan gibi secenekleri secince tekrar baglaniyor. Eskiden onu da yapmiyordu.