[Çözüldü] Bad Rip Hatası

[eronis]

Kod Seç Genişlet

[43867.428019] Code: Bad Rip Value
[43867.428019] Rip[<00000000cf00000>]Oxcf000000
[43867.428019] RSP<ffff88004e83d20>
[43867.428019] CR2:00000000cf000000

Bilgisayarı her kapatırken böyle bir hata alıyorum yada bu hata görünmese dahi kapanmıyor. Açılınca da bir hata alıyorum, son zamanlarda açılış hatasını almıyorum. Kapanış ve açılış hatalarını arasıra alıyorum ve ne zaman gelecekleri belli olmuyor. Bir açılış hatası yaratmayı denedim, bilgisayara reset atarak vs... ama olmadı. Eğer olursa atarım. Bad Rip hakkında fikriniz var mı?

[if]

@eronis,

Kod Seç Genişlet


cat /etc/lsb-release
uname -a
dmesg çıktısı alalım.

Kod Seç Genişlet


mkdir deneme && cd deneme
wget http://koti.kapsi.fi/~tjaalton/bdw/linux-image-3.16.0-36-generic_3.16.0-36.48+bdw1_amd64.deb http://koti.kapsi.fi/~tjaalton/bdw/linux-image-extra-3.16.0-36-generic_3.16.0-36.48+bdw1_amd64.deb
sudo dpkg -i *.deb komutları ardından kurulacak yeni çekirdek (bdwl) ile başlatınca böyle bir sorun var mı?

https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1449401

[eronis]

Kod Seç Genişlet

DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=14.04
DISTRIB_CODENAME=trusty
DISTRIB_DESCRIPTION="Ubuntu 14.04.2 LTS"
uname

Kod Seç Genişlet

Linux Asus 3.16.0-36-generic #48~14.04.1-Ubuntu SMP Wed Apr 15 13:11:28 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux

dmesg

Kod Seç Genişlet

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-36-generic (buildd@toyol) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #48~14.04.1-Ubuntu SMP Wed Apr 15 13:11:28 UTC 2015 (Ubuntu 3.16.0-36.48~14.04.1-generic 3.16.7-ckt9)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-36-generic root=UUID=b359afe0-f0e2-4f18-9640-612c9e11c049 ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffa7fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bffa8000-0x00000000bffaffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bffb0000-0x00000000bffbdfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bffbe000-0x00000000bfffffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: ASUSTeK Computer Inc.  F5SL              /F5SL    , BIOS 303        07/29/2008
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0C0000000 mask FC0000000 uncachable
[    0.000000]   1 base 000000000 mask F00000000 write-back
[    0.000000]   2 base 100000000 mask FC0000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 3GB, range: 1GB, type UC
[    0.000000] reg 1, base: 0GB, range: 4GB, type WB
[    0.000000] reg 2, base: 4GB, range: 1GB, type WB
[    0.000000] total RAM covered: 4096M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K    chunk_size: 64K    num_reg: 3     lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 4GB, range: 1GB, type WB
[    0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xbffa8 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01fbd000, 0x01fbdfff] PGTABLE
[    0.000000] BRK [0x01fbe000, 0x01fbefff] PGTABLE
[    0.000000] BRK [0x01fbf000, 0x01fbffff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
[    0.000000]  [mem 0x13fe00000-0x13fffffff] page 2M
[    0.000000] BRK [0x01fc0000, 0x01fc0fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
[    0.000000]  [mem 0x13c000000-0x13fdfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]
[    0.000000]  [mem 0x100000000-0x13bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xbffa7fff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0xbfdfffff] page 2M
[    0.000000]  [mem 0xbfe00000-0xbffa7fff] page 4k
[    0.000000] RAMDISK: [mem 0x35ad6000-0x36d62fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F9010 000014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 0x00000000BFFB0000 000040 (v01 072908 RSDT1056 20080729 MSFT 00000097)
[    0.000000] ACPI: FACP 0x00000000BFFB0200 000084 (v02 072908 FACP1056 20080729 MSFT 00000097)
[    0.000000] ACPI: DSDT 0x00000000BFFB0630 007281 (v01 F5SL0  F5SL0002 00000002 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000BFFBE000 000040
[    0.000000] ACPI: APIC 0x00000000BFFB0390 00005C (v01 072908 APIC1056 20080729 MSFT 00000097)
[    0.000000] ACPI: MCFG 0x00000000BFFB03F0 00003C (v01 072908 OEMMCFG  20080729 MSFT 00000097)
[    0.000000] ACPI: OEMX 0x00000000BFFB0430 000176 (v01 072908 OEMX1056 20080729 MSFT 00000097)
[    0.000000] ACPI: WDRT 0x00000000BFFB05B0 000047 (v01 072908 OEMWDRT  20080729 MSFT 00000097)
[    0.000000] ACPI: BOOT 0x00000000BFFB0600 000028 (v01 072908 BOOT1056 20080729 MSFT 00000097)
[    0.000000] ACPI: OEMB 0x00000000BFFBE040 000071 (v01 072908 OEMB1056 20080729 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[    0.000000]   NODE_DATA [mem 0x13fff8000-0x13fffcfff]
[    0.000000]  [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x13fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xbffa7fff]
[    0.000000]   node   0: [mem 0x100000000-0x13fffffff]
[    0.000000] On node 0 totalpages: 1048390
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12223 pages used for memmap
[    0.000000]   DMA32 zone: 782248 pages, LIFO batch:31
[    0.000000]   Normal zone: 4096 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbffa8000-0xbffaffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbffb0000-0xbffbdfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbffbe000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
[    0.000000] e820: [mem 0xc0000000-0xfedfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s81408 r8192 d20992 u1048576
[    0.000000] pcpu-alloc: s81408 r8192 d20992 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1031986
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-36-generic root=UUID=b359afe0-f0e2-4f18-9640-612c9e11c049 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 4026256K/4193560K available (7624K kernel code, 1131K rwdata, 3596K rodata, 1352K init, 1300K bss, 167304K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]    RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]    RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[    0.000000]    Offload RCU callbacks from all CPUs
[    0.000000]    Offload RCU callbacks from CPUs: 0-1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16640 nr_irqs:512 16
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 16777216 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] tsc: Unable to calibrate against PIT
[    0.000000] tsc: using PMTIMER reference calibration
[    0.000000] tsc: Detected 2000.447 MHz processor
[    0.016026] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.89 BogoMIPS (lpj=8001788)
[    0.016032] pid_max: default: 32768 minimum: 301
[    0.016054] ACPI: Core revision 20140424
[    0.027011] ACPI: All ACPI Tables successfully acquired
[    0.028049] Security Framework initialized
[    0.028092] AppArmor: AppArmor initialized
[    0.028094] Yama: becoming mindful.
[    0.028633] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.040117] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.042383] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.042400] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.043046] Initializing cgroup subsys memory
[    0.043093] Initializing cgroup subsys devices
[    0.043106] Initializing cgroup subsys freezer
[    0.043112] Initializing cgroup subsys net_cls
[    0.043123] Initializing cgroup subsys blkio
[    0.043131] Initializing cgroup subsys perf_event
[    0.043134] Initializing cgroup subsys net_prio
[    0.043151] Initializing cgroup subsys hugetlb
[    0.043193] CPU: Physical Processor ID: 0
[    0.043194] CPU: Processor Core ID: 0
[    0.043198] mce: CPU supports 6 MCE banks
[    0.043210] CPU0: Thermal monitoring handled by SMI
[    0.043226] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.043226] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.043226] tlb_flushall_shift: -1
[    0.043397] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
[    0.045793] ftrace: allocating 29244 entries in 115 pages
[    0.056501] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.100547] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     T5750  @ 2.00GHz (fam: 06, model: 0f, stepping: 0d)
[    0.104000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[    0.104000] perf_event_intel: PEBS disabled due to CPU errata
[    0.104000] ... version:                2
[    0.104000] ... bit width:              40
[    0.104000] ... generic registers:      2
[    0.104000] ... value mask:             000000ffffffffff
[    0.104000] ... max period:             000000007fffffff
[    0.104000] ... fixed-purpose events:   3
[    0.104000] ... event mask:             0000000700000003
[    0.104000] x86: Booting SMP configuration:
[    0.104000] .... node  #0, CPUs:      #1
[    0.104000] CPU1: Thermal monitoring handled by SMI
[    0.116047] x86: Booted up 1 node, 2 CPUs
[    0.116053] smpboot: Total of 2 processors activated (8001.78 BogoMIPS)
[    0.116137] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.117638] devtmpfs: initialized
[    0.123546] evm: security.selinux
[    0.123548] evm: security.SMACK64
[    0.123550] evm: security.SMACK64EXEC
[    0.123552] evm: security.SMACK64TRANSMUTE
[    0.123553] evm: security.SMACK64MMAP
[    0.123554] evm: security.ima
[    0.123556] evm: security.capability
[    0.124037] PM: Registering ACPI NVS region [mem 0xbffa8000-0xbffaffff] (32768 bytes)
[    0.124040] PM: Registering ACPI NVS region [mem 0xbffbe000-0xbfffffff] (270336 bytes)
[    0.126077] pinctrl core: initialized pinctrl subsystem
[    0.126211] regulator-dummy: no parameters
[    0.126251] RTC time: 13:43:08, date: 05/02/15
[    0.126320] NET: Registered protocol family 16
[    0.126561] cpuidle: using governor ladder
[    0.126564] cpuidle: using governor menu
[    0.126636] ACPI: bus type PCI registered
[    0.126639] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.126745] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.126748] PCI: not using MMCONFIG
[    0.126750] PCI: Using configuration type 1 for base access
[    0.132140] ACPI: Added _OSI(Module Device)
[    0.132144] ACPI: Added _OSI(Processor Device)
[    0.132145] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.132147] ACPI: Added _OSI(Processor Aggregator Device)
[    0.136020] ACPI: Executed 1 blocks of module-level executable AML code
[    0.140215] ACPI: Dynamic OEM Table Load:
[    0.140226] ACPI: SSDT 0xFFFF88013B017000 000C99 (v01 AMI    CPU1PM   00000001 INTL 20051117)
[    0.140857] ACPI: Dynamic OEM Table Load:
[    0.140866] ACPI: SSDT 0xFFFF880139548000 000C99 (v01 AMI    CPU2PM   00000001 INTL 20051117)
[    0.141548] ACPI: Interpreter enabled
[    0.141558] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[    0.141564] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.141584] ACPI: (supports S0 S3 S4 S5)
[    0.141586] ACPI: Using IOAPIC for interrupt routing
[    0.141611] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.142165] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.142787] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.149734] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.149743] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.149750] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.150061] PCI host bridge to bus 0000:00
[    0.150065] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.150068] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.150070] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.150073] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.150075] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[    0.150078] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
[    0.150080] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed44fff]
[    0.150092] pci 0000:00:00.0: [1039:0671] type 00 class 0x060000
[    0.150229] pci 0000:00:01.0: [1039:0004] type 01 class 0x060400
[    0.150316] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.150413] pci 0000:00:02.0: [1039:0968] type 00 class 0x060100
[    0.150567] pci 0000:00:02.5: [1039:5513] type 00 class 0x010180
[    0.150618] pci 0000:00:02.5: reg 0x20: [io  0xffe0-0xffef]
[    0.150641] pci 0000:00:02.5: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.150643] pci 0000:00:02.5: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.150646] pci 0000:00:02.5: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.150648] pci 0000:00:02.5: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.150676] pci 0000:00:02.5: PME# supported from D3cold
[    0.150767] pci 0000:00:03.0: [1039:7001] type 00 class 0x0c0310
[    0.150782] pci 0000:00:03.0: reg 0x10: [mem 0xfddff000-0xfddfffff]
[    0.150870] pci 0000:00:03.0: System wakeup disabled by ACPI
[    0.150931] pci 0000:00:03.1: [1039:7001] type 00 class 0x0c0310
[    0.150946] pci 0000:00:03.1: reg 0x10: [mem 0xfddfe000-0xfddfefff]
[    0.151033] pci 0000:00:03.1: System wakeup disabled by ACPI
[    0.151097] pci 0000:00:03.3: [1039:7002] type 00 class 0x0c0320
[    0.151115] pci 0000:00:03.3: reg 0x10: [mem 0xfddfd000-0xfddfdfff]
[    0.151192] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
[    0.151227] pci 0000:00:03.3: System wakeup disabled by ACPI
[    0.151297] pci 0000:00:04.0: [1039:0191] type 00 class 0x020000
[    0.151315] pci 0000:00:04.0: reg 0x10: [mem 0xfddfcc00-0xfddfcc7f]
[    0.151326] pci 0000:00:04.0: reg 0x14: [io  0xcc00-0xcc7f]
[    0.151395] pci 0000:00:04.0: supports D1 D2
[    0.151397] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.151432] pci 0000:00:04.0: System wakeup disabled by ACPI
[    0.151498] pci 0000:00:05.0: [1039:1183] type 00 class 0x010185
[    0.151516] pci 0000:00:05.0: reg 0x10: [io  0xc800-0xc807]
[    0.151527] pci 0000:00:05.0: reg 0x14: [io  0xc400-0xc403]
[    0.151537] pci 0000:00:05.0: reg 0x18: [io  0xc000-0xc007]
[    0.151548] pci 0000:00:05.0: reg 0x1c: [io  0xbc00-0xbc03]
[    0.151558] pci 0000:00:05.0: reg 0x20: [io  0xb800-0xb80f]
[    0.151569] pci 0000:00:05.0: reg 0x24: [io  0xb400-0xb47f]
[    0.151608] pci 0000:00:05.0: PME# supported from D3cold
[    0.151643] pci 0000:00:05.0: System wakeup disabled by ACPI
[    0.151711] pci 0000:00:06.0: [1039:000a] type 01 class 0x060400
[    0.151803] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[    0.151845] pci 0000:00:06.0: System wakeup disabled by ACPI
[    0.151914] pci 0000:00:07.0: [1039:000a] type 01 class 0x060400
[    0.152009] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[    0.152126] pci 0000:00:0f.0: [1039:7502] type 00 class 0x040300
[    0.152145] pci 0000:00:0f.0: reg 0x10: [mem 0xfddf8000-0xfddfbfff]
[    0.152224] pci 0000:00:0f.0: PME# supported from D0 D3hot D3cold
[    0.152259] pci 0000:00:0f.0: System wakeup disabled by ACPI
[    0.152423] pci 0000:01:00.0: [1002:95c4] type 00 class 0x030000
[    0.152441] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
[    0.152452] pci 0000:01:00.0: reg 0x14: [io  0xd800-0xd8ff]
[    0.152464] pci 0000:01:00.0: reg 0x18: [mem 0xfdef0000-0xfdefffff]
[    0.152501] pci 0000:01:00.0: reg 0x30: [mem 0xfdec0000-0xfdedffff pref]
[    0.152553] pci 0000:01:00.0: supports D1 D2
[    0.160026] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.160034] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    0.160038] pci 0000:00:01.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.160046] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.160158] pci 0000:02:00.0: [168c:001c] type 00 class 0x020000
[    0.160193] pci 0000:02:00.0: reg 0x10: [mem 0xfdff0000-0xfdffffff 64bit]
[    0.160446] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.160458] pci 0000:00:06.0: PCI bridge to [bus 02]
[    0.160468] pci 0000:00:06.0:   bridge window [mem 0xfdf00000-0xfdffffff]
[    0.160590] acpiphp: Slot [1] registered
[    0.160624] pci 0000:00:07.0: PCI bridge to [bus 03-05]
[    0.160632] pci 0000:00:07.0:   bridge window [io  0xe000-0xefff]
[    0.160637] pci 0000:00:07.0:   bridge window [mem 0xfe000000-0xfebfffff]
[    0.160644] pci 0000:00:07.0:   bridge window [mem 0xfa000000-0xfcffffff 64bit pref]
[    0.161208] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *10 11 12 14 15)
[    0.161278] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *7 10 11 12 14 15)
[    0.161345] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 7 10 11 12 14 15)
[    0.161411] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 *15)
[    0.161477] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 *11 12 14 15)
[    0.161542] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 7 10 11 12 14 15)
[    0.161607] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 7 10 11 12 14)
[    0.161672] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    0.161870] ACPI: Enabled 2 GPEs in block 00 to 0F
[    0.161879] ACPI: Enabled 2 GPEs in block 10 to 1F
[    0.161957] ACPI : EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[    0.162563] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.162563] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.162563] vgaarb: loaded
[    0.162563] vgaarb: bridge control possible 0000:01:00.0
[    0.162563] SCSI subsystem initialized
[    0.162563] libata version 3.00 loaded.
[    0.162563] ACPI: bus type USB registered
[    0.162563] usbcore: registered new interface driver usbfs
[    0.162563] usbcore: registered new interface driver hub
[    0.162563] usbcore: registered new device driver usb
[    0.162563] PCI: Using ACPI for IRQ routing
[    0.175318] PCI: pci_cache_line_size set to 64 bytes
[    0.175370] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.175373] e820: reserve RAM buffer [mem 0xbffa8000-0xbfffffff]
[    0.175562] NetLabel: Initializing
[    0.175565] NetLabel:  domain hash size = 128
[    0.175566] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.175588] NetLabel:  unlabeled traffic allowed by default
[    0.175607] Switched to clocksource refined-jiffies
[    0.190779] AppArmor: AppArmor Filesystem Enabled
[    0.190871] pnp: PnP ACPI init
[    0.190905] ACPI: bus type PNP registered
[    0.191062] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.191168] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.191257] pnp 00:02: Plug and Play ACPI device, IDs SYN0a04 SYN0a00 SYN0002 PNP0f03 AUI1307 AUI1303 (active)
[    0.191508] system 00:03: [io  0x0290-0x0297] has been reserved
[    0.191512] system 00:03: [io  0x0c00-0x0c05] has been reserved
[    0.191515] system 00:03: [io  0x0d00-0x0d05] has been reserved
[    0.191518] system 00:03: [io  0x0480-0x048f] has been reserved
[    0.191521] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.191524] system 00:03: [io  0x0800-0x087f] could not be reserved
[    0.191527] system 00:03: [io  0x0880-0x08ff] has been reserved
[    0.191530] system 00:03: [io  0x0c00-0x0c7f] could not be reserved
[    0.191533] system 00:03: [io  0x025c-0x025f] has been reserved
[    0.191536] system 00:03: [io  0x2000-0x20fe] has been reserved
[    0.191539] system 00:03: [mem 0xfff80000-0xffffffff] has been reserved
[    0.191542] system 00:03: [mem 0xffb80000-0xffbfffff] has been reserved
[    0.191545] system 00:03: [mem 0xffee0000-0xffefffff] has been reserved
[    0.191548] system 00:03: [mem 0xfed10000-0xfed3ffff] has been reserved
[    0.191551] system 00:03: [mem 0xfed4b000-0xfed8afff] has been reserved
[    0.191556] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.191645] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.191649] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.191652] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.191793] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.191797] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.192136] system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.192140] system 00:06: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.192143] system 00:06: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.192146] system 00:06: [mem 0x00100000-0xbfffffff] could not be reserved
[    0.192150] system 00:06: [mem 0xfed45000-0xffffffff] could not be reserved
[    0.192153] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.192290] pnp: PnP ACPI: found 7 devices
[    0.192292] ACPI: bus type PNP unregistered
[    0.199857] Switched to clocksource acpi_pm
[    0.199904] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.199910] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    0.199916] pci 0000:00:01.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.199921] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.199929] pci 0000:00:06.0: PCI bridge to [bus 02]
[    0.199935] pci 0000:00:06.0:   bridge window [mem 0xfdf00000-0xfdffffff]
[    0.199945] pci 0000:00:07.0: PCI bridge to [bus 03-05]
[    0.199949] pci 0000:00:07.0:   bridge window [io  0xe000-0xefff]
[    0.199955] pci 0000:00:07.0:   bridge window [mem 0xfe000000-0xfebfffff]
[    0.199960] pci 0000:00:07.0:   bridge window [mem 0xfa000000-0xfcffffff 64bit pref]
[    0.199968] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.199970] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.199973] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.199976] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.199978] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[    0.199981] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed44fff]
[    0.199983] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.199986] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff]
[    0.199989] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.199992] pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff]
[    0.199995] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.199998] pci_bus 0000:03: resource 1 [mem 0xfe000000-0xfebfffff]
[    0.200000] pci_bus 0000:03: resource 2 [mem 0xfa000000-0xfcffffff 64bit pref]
[    0.200000] NET: Registered protocol family 2
[    0.200000] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.200000] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.200000] TCP: Hash tables configured (established 32768 bind 32768)
[    0.200000] TCP: reno registered
[    0.200000] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.200000] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.200000] NET: Registered protocol family 1
[    0.360243] pci 0000:01:00.0: Video device with shadowed ROM
[    0.360252] PCI: CLS 32 bytes, default 64
[    0.360380] Trying to unpack rootfs image as initramfs...
[    0.804388] Freeing initrd memory: 18996K (ffff880035ad6000 - ffff880036d63000)
[    0.804534] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.804541] software IO TLB [mem 0xbbfa8000-0xbffa8000] (64MB) mapped at [ffff8800bbfa8000-ffff8800bffa7fff]
[    0.804652] Simple Boot Flag value 0xc0 read from CMOS RAM was invalid
[    0.804654] Simple Boot Flag at 0xff set to 0x80
[    0.804995] microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa3
[    0.805002] microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa3
[    0.805141] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.805179] Scanning for low memory corruption every 60 seconds
[    0.805651] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.805702] Initialise system trusted keyring
[    0.805747] audit: initializing netlink subsys (disabled)
[    0.805797] audit: type=2000 audit(1430574188.803:1): initialized
[    0.806399] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.809159] zpool: loaded
[    0.809162] zbud: loaded
[    0.809366] VFS: Disk quotas dquot_6.5.2
[    0.809437] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.810286] fuse init (API version 7.23)
[    0.810424] msgmni has been set to 7900
[    0.810520] Key type big_key registered
[    0.810993] Key type asymmetric registered
[    0.810998] Asymmetric key parser 'x509' registered
[    0.811060] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.811122] io scheduler noop registered
[    0.811126] io scheduler deadline registered (default)
[    0.811209] io scheduler cfq registered
[    0.811551] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.811576] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.811658] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    0.811660] vesafb: scrolling: redraw
[    0.811662] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    0.811688] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010780000, using 3072k, total 3072k
[    0.811850] Console: switching to colour frame buffer device 128x48
[    0.811878] fb0: VESA VGA frame buffer device
[    0.811912] intel_idle: does not run on family 6 model 15
[    0.812159] ACPI: AC Adapter [AC0] (on-line)
[    0.812321] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.813196] ACPI: Lid Switch [LID]
[    0.813267] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.813273] ACPI: Power Button [PWRB]
[    0.813340] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    0.813343] ACPI: Sleep Button [SLPB]
[    0.813405] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.813408] ACPI: Power Button [PWRF]
[    0.813536] tsc: Marking TSC unstable due to TSC halts in idle
[    0.813543] ACPI: acpi_idle registered with cpuidle
[    0.815307] thermal LNXTHERM:00: registered as thermal_zone0
[    0.815311] ACPI: Thermal Zone [THRM] (76 C)
[    0.815356] GHES: HEST is not enabled!
[    0.815549] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.818495] Linux agpgart interface v0.103
[    0.822119] brd: module loaded
[    0.823918] loop: module loaded
[    0.824186] pata_sis 0000:00:02.5: version 0.5.2
[    0.825470] scsi0 : pata_sis
[    0.825725] scsi1 : pata_sis
[    0.825829] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffe0 irq 14
[    0.825832] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffe8 irq 15
[    0.826420] libphy: Fixed MDIO Bus: probed
[    0.826425] tun: Universal TUN/TAP device driver, 1.6
[    0.826427] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.826674] PPP generic driver version 2.4.2
[    0.826825] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.826833] ehci-pci: EHCI PCI platform driver
[    0.827380] ehci-pci 0000:00:03.3: EHCI Host Controller
[    0.827392] ehci-pci 0000:00:03.3: new USB bus registered, assigned bus number 1
[    0.827519] ehci-pci 0000:00:03.3: irq 22, io mem 0xfddfd000
[    0.830515] ACPI: Battery Slot [BAT0] (battery present)
[    0.840023] ehci-pci 0000:00:03.3: USB 2.0 started, EHCI 1.00
[    0.840117] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.840120] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.840123] usb usb1: Product: EHCI Host Controller
[    0.840126] usb usb1: Manufacturer: Linux 3.16.0-36-generic ehci_hcd
[    0.840128] usb usb1: SerialNumber: 0000:00:03.3
[    0.840311] hub 1-0:1.0: USB hub found
[    0.840321] hub 1-0:1.0: 8 ports detected
[    0.840599] ehci-platform: EHCI generic platform driver
[    0.840625] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.840631] ohci-pci: OHCI PCI platform driver
[    0.840736] ohci-pci 0000:00:03.0: OHCI PCI host controller
[    0.840744] ohci-pci 0000:00:03.0: new USB bus registered, assigned bus number 2
[    0.840776] ohci-pci 0000:00:03.0: irq 20, io mem 0xfddff000
[    0.898060] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    0.898063] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.898066] usb usb2: Product: OHCI PCI host controller
[    0.898068] usb usb2: Manufacturer: Linux 3.16.0-36-generic ohci_hcd
[    0.898071] usb usb2: SerialNumber: 0000:00:03.0
[    0.898222] hub 2-0:1.0: USB hub found
[    0.898234] hub 2-0:1.0: 4 ports detected
[    0.898481] ohci-pci 0000:00:03.1: OHCI PCI host controller
[    0.898489] ohci-pci 0000:00:03.1: new USB bus registered, assigned bus number 3
[    0.898518] ohci-pci 0000:00:03.1: irq 21, io mem 0xfddfe000
[    0.954063] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.954066] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.954069] usb usb3: Product: OHCI PCI host controller
[    0.954071] usb usb3: Manufacturer: Linux 3.16.0-36-generic ohci_hcd
[    0.954074] usb usb3: SerialNumber: 0000:00:03.1
[    0.954231] hub 3-0:1.0: USB hub found
[    0.954241] hub 3-0:1.0: 4 ports detected
[    0.954416] ohci-platform: OHCI generic platform driver
[    0.954432] uhci_hcd: USB Universal Host Controller Interface driver
[    0.954552] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    0.957125] i8042: Detected active multiplexing controller, rev 1.1
[    0.957752] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.957759] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.957802] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.957836] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.957875] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.958069] mousedev: PS/2 mouse device common for all mice
[    0.958389] rtc_cmos 00:00: RTC can wake from S4
[    0.958542] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[    0.958568] rtc_cmos 00:00: alarms up to one year, 114 bytes nvram
[    0.958680] device-mapper: uevent: version 1.0.3
[    0.958809] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    0.958834] ledtrig-cpu: registered to indicate activity on CPUs
[    0.958972] TCP: cubic registered
[    0.959172] NET: Registered protocol family 10
[    0.959487] NET: Registered protocol family 17
[    0.959505] Key type dns_resolver registered
[    0.959916] Loading compiled-in X.509 certificates
[    0.961284] Loaded X.509 cert 'Magrathea: Glacier signing key: acf6918139ad3fcacc01c26ab24909d59079a578'
[    0.961311] registered taskstats version 1
[    0.964288] Key type trusted registered
[    0.968896] Key type encrypted registered
[    0.968909] AppArmor: AppArmor sha1 policy hashing enabled
[    0.968915] ima: No TPM chip found, activating TPM-bypass!
[    0.968950] evm: HMAC attrs: 0x1
[    0.969305]   Magic number: 15:205:735
[    0.969494] rtc_cmos 00:00: setting system clock to 2015-05-02 13:43:09 UTC (1430574189)
[    0.976195] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.976197] EDD information not available.
[    0.976297] PM: Hibernation image not present or could not be loaded.
[    0.993226] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    0.996259] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-T40N, JR03, max UDMA/33
[    1.012257] ata1.00: configured for UDMA/33
[    1.017744] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T40N  JR03 PQ: 0 ANSI: 5
[    1.035076] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.035080] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.035248] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.035356] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.035460] ata2: port disabled--ignoring
[    1.037501] Freeing unused kernel memory: 1352K (ffffffff81d1c000 - ffffffff81e6e000)
[    1.037504] Write protecting the kernel read-only data: 12288k
[    1.039712] Freeing unused kernel memory: 556K (ffff880001775000 - ffff880001800000)
[    1.041743] Freeing unused kernel memory: 500K (ffff880001b83000 - ffff880001c00000)
[    1.059037] systemd-udevd[106]: starting version 204
[    1.092637] sata_sis 0000:00:05.0: version 1.0
[    1.092795] sata_sis 0000:00:05.0: Detected SiS 1183/966/966L/968/680 controller in PATA mode
[    1.094954] scsi2 : sata_sis
[    1.099791] scsi3 : sata_sis
[    1.099890] ata3: PATA max UDMA/133 cmd 0xc800 ctl 0xc400 bmdma 0xb800 irq 17
[    1.099894] ata4: PATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb808 irq 17
[    1.099939] sis190: sis190 Gigabit Ethernet driver 1.4 loaded
[    1.100160] sis190: 0000:00:04.0: Read MAC address from EEPROM
[    1.100163] sis190: 0000:00:04.0: Error EEPROM read 0
[    1.100166] sis190: 0000:00:04.0: Read MAC address from APC
[    1.157091] sis190: 0000:00:04.0: Atheros PHY transceiver at address 1
[    1.264245] ata3.00: ATA-8: ST9250827AS, 3.AAA, max UDMA/133
[    1.264249] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.280233] ata3.00: configured for UDMA/133
[    1.280378] scsi 2:0:0:0: Direct-Access     ATA      ST9250827AS      A    PQ: 0 ANSI: 5
[    1.280730] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    1.280743] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    1.280809] sd 2:0:0:0: [sda] Write Protect is off
[    1.280813] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.280946] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.306080]  sda: sda1 sda2 < sda5 > sda4
[    1.306608] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.468053] usb 1-5: new high-speed USB device number 4 using ehci-pci
[    1.607583] usb 1-5: New USB device found, idVendor=174f, idProduct=5a31
[    1.607588] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    1.607591] usb 1-5: Product: USB 2.0 Camera
[    1.607593] usb 1-5: Manufacturer: Sonix Technology Co., Ltd.
[    1.607596] usb 1-5: SerialNumber: SN0001
[    1.668024] sis190: 0000:00:04.0: Using transceiver at address 1 as default
[    1.700277] sis190 0000:00:04.0 eth0: 0000:00:04.0: SiS 191 PCI Gigabit Ethernet adapter at ffffc9001073cc00 (IRQ: 19), f6:cb:88:00:43:03
[    1.700281] sis190 0000:00:04.0 eth0: RGMII mode.
[    1.700290] sis190 0000:00:04.0 eth0: Enabling Auto-negotiation
[    1.980041] usb 1-8: new high-speed USB device number 6 using ehci-pci
[    2.009597] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008/0x0, board id: 3655, fw id: 30712
[    2.053535] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input12
[    2.070735] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    2.132971] usb 1-8: New USB device found, idVendor=0bda, idProduct=0116
[    2.132976] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.132979] usb 1-8: Product: USB2.0-CRW
[    2.132982] usb 1-8: Manufacturer: Generic
[    2.132984] usb 1-8: SerialNumber: 20021111153705700
[    2.241866] random: nonblocking pool is initialized
[    2.440049] usb 3-2: new low-speed USB device number 2 using ohci-pci
[    2.652124] usb 3-2: New USB device found, idVendor=046d, idProduct=c019
[    2.652130] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.652133] usb 3-2: Product: USB Optical Mouse
[    2.652136] usb 3-2: Manufacturer: Logitech
[    2.956055] usb 3-3: new full-speed USB device number 3 using ohci-pci
[    3.254141] usb 3-3: New USB device found, idVendor=0b05, idProduct=1712
[    3.254146] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=3
[    3.254149] usb 3-3: SerialNumber: 0194E8-5B-0002
[    3.816080] usb 2-1: new full-speed USB device number 2 using ohci-pci
[    4.031154] usb 2-1: New USB device found, idVendor=1130, idProduct=f211
[    4.031160] usb 2-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    4.031163] usb 2-1: Product: USB  AUDIO 
[   13.339192] Adding 7812092k swap on /dev/sda1.  Priority:-1 extents:1 across:7812092k FS
[   14.083610] systemd-udevd[276]: starting version 204
[   14.270503] lp: driver loaded but no devices found
[   14.283232] asus_laptop: Asus Laptop Support version 0.42
[   14.283346] asus_laptop:    model detected
[   14.283639] asus_laptop: Backlight controlled by ACPI video driver
[   14.283886] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input13
[   14.287373] ppdev: user-space parallel port driver
[   14.299182] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   14.352664] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   14.384118] [drm] Initialized drm 1.1.0 20060810
[   14.387645] acpi device:10: registered as cooling_device2
[   14.387770] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:0d/LNXVIDEO:00/input/input14
[   14.454718] cfg80211: Calling CRDA to update world regulatory domain
[   14.483173] ath5k 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[   14.483391] ath5k 0000:02:00.0: registered as 'phy0'
[   14.525980] [drm] radeon kernel modesetting enabled.
[   14.526103] checking generic (d0000000 300000) vs hw (d0000000 10000000)
[   14.526106] fb: switching to radeondrmfb from VESA VGA
[   14.526186] Console: switching to colour dummy device 80x25
[   14.566257] [drm] initializing kernel modesetting (RV620 0x1002:0x95C4 0x1043:0x19E2).
[   14.566352] [drm] register mmio base: 0xFDEF0000
[   14.566354] [drm] register mmio size: 65536
[   14.578386] ATOM BIOS: ASID:19002.001
[   14.578448] radeon 0000:01:00.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used)
[   14.578451] radeon 0000:01:00.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
[   14.578454] [drm] Detected VRAM RAM=256M, BAR=256M
[   14.578457] [drm] RAM width 64bits DDR
[   14.580088] [TTM] Zone  kernel: Available graphics memory: 2023846 kiB
[   14.580093] [TTM] Initializing pool allocator
[   14.580102] [TTM] Initializing DMA pool allocator
[   14.580153] [drm] radeon: 256M of VRAM memory ready
[   14.580155] [drm] radeon: 512M of GTT memory ready.
[   14.580197] [drm] Loading RV620 Microcode
[   14.630408] snd_hda_intel 0000:00:0f.0: CORB reset timeout#1, CORBRP = 0
[   14.657681] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   14.657687] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   14.657693] sound hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   14.657695] sound hdaudioC0D0:    mono: mono_out=0x0
[   14.657698] sound hdaudioC0D0:    inputs:
[   14.657701] sound hdaudioC0D0:      Internal Mic=0x19
[   14.657704] sound hdaudioC0D0:      Mic=0x18
[   14.680968] input: HDA SIS966 Mic as /devices/pci0000:00/0000:00:0f.0/sound/card0/input15
[   14.681096] input: HDA SIS966 Headphone as /devices/pci0000:00/0000:00:0f.0/sound/card0/input16
[   14.985877] Bluetooth: Core ver 2.19
[   14.985919] NET: Registered protocol family 31
[   14.985921] Bluetooth: HCI device and connection manager initialized
[   14.986098] Bluetooth: HCI socket layer initialized
[   14.986103] Bluetooth: L2CAP socket layer initialized
[   14.986123] Bluetooth: SCO socket layer initialized
[   15.001275] usbcore: registered new interface driver btusb
[   15.153638] ath: EEPROM regdomain: 0x60
[   15.153643] ath: EEPROM indicates we should expect a direct regpair map
[   15.153648] ath: Country alpha2 being used: 00
[   15.153650] ath: Regpair used: 0x60
[   15.160313] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   15.161109] ath5k: phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[   15.356081] [drm] radeon: power management initialized
[   15.356092] [drm] GART: num cpu pages 131072, num gpu pages 131072
[   15.368028] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[   15.368097] radeon 0000:01:00.0: WB enabled
[   15.368102] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000010000c00 and cpu addr 0xffff8800b203ac00
[   15.368107] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   15.368109] [drm] Driver supports precise vblank timestamp query.
[   15.368111] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[   15.368150] radeon 0000:01:00.0: irq 40 for MSI/MSI-X
[   15.368175] radeon 0000:01:00.0: radeon: using MSI.
[   15.368212] [drm] radeon: irq initialized.
[   15.400334] [drm] ring test on 0 succeeded in 0 usecs
[   15.401328] [drm] ib test on ring 0 succeeded in 0 usecs
[   15.402610] [drm] Radeon Display Connectors
[   15.402614] [drm] Connector 0:
[   15.402616] [drm]   VGA-1
[   15.402619] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[   15.402620] [drm]   Encoders:
[   15.402622] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   15.402624] [drm] Connector 1:
[   15.402625] [drm]   LVDS-1
[   15.402627] [drm]   DDC: 0x7f68 0x7f68 0x7f6c 0x7f6c 0x7f70 0x7f70 0x7f74 0x7f74
[   15.402628] [drm]   Encoders:
[   15.402630] [drm]     LCD1: INTERNAL_KLDSCP_LVTMA
[   15.402632] [drm] Connector 2:
[   15.402633] [drm]   DVI-D-1
[   15.402635] [drm]   HPD4
[   15.402637] [drm]   DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[   15.402638] [drm]   Encoders:
[   15.402640] [drm]     DFP1: INTERNAL_UNIPHY
[   15.454015] media: Linux media interface: v0.10
[   15.460979] audit: type=1400 audit(1430574203.988:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=433 comm="apparmor_parser"
[   15.460991] audit: type=1400 audit(1430574203.988:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=433 comm="apparmor_parser"
[   15.460998] audit: type=1400 audit(1430574203.988:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=433 comm="apparmor_parser"
[   15.461010] audit: type=1400 audit(1430574203.988:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=385 comm="apparmor_parser"
[   15.461020] audit: type=1400 audit(1430574203.988:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=385 comm="apparmor_parser"
[   15.461026] audit: type=1400 audit(1430574203.988:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=385 comm="apparmor_parser"
[   15.461569] audit: type=1400 audit(1430574203.988:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=433 comm="apparmor_parser"
[   15.461576] audit: type=1400 audit(1430574203.988:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=433 comm="apparmor_parser"
[   15.461586] audit: type=1400 audit(1430574203.988:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=385 comm="apparmor_parser"
[   15.461592] audit: type=1400 audit(1430574203.988:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=385 comm="apparmor_parser"
[   15.470164] Linux video capture interface: v2.00
[   15.483808] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (174f:5a31)
[   15.498852] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:03.3/usb1/1-5/1-5:1.0/input/input17
[   15.499154] usbcore: registered new interface driver uvcvideo
[   15.499158] USB Video Class driver (1.1.1)
[   15.513091] cfg80211: World regulatory domain updated:
[   15.513098] cfg80211:  DFS Master region: unset
[   15.513100] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   15.513104] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   15.513107] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   15.513110] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[   15.513112] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   15.513115] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   15.604651] hidraw: raw HID events driver (C) Jiri Kosina
[   15.756848] usbcore: registered new interface driver usbhid
[   15.756852] usbhid: USB HID core driver
[   15.880900] usb-storage 1-8:1.0: USB Mass Storage device detected
[   15.881001] usb 2-1: usbmixer: volume control quirk for Tenx TP6911 Audio Headset
[   15.881011] usb 2-1: usbmixer: volume control quirk for Tenx TP6911 Audio Headset
[   15.881785] usbcore: registered new interface driver snd-usb-audio
[   15.887311] scsi4 : usb-storage 1-8:1.0
[   15.887732] usbcore: registered new interface driver usb-storage
[   15.910571] usbcore: registered new interface driver uas
[   15.952941] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:03.1/usb3/3-2/3-2:1.0/0003:046D:C019.0001/input/input18
[   15.953707] hid-generic 0003:046D:C019.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:03.1-2/input0
[   15.954135] input: USB  AUDIO   as /devices/pci0000:00/0000:00:03.0/usb2/2-1/2-1:1.3/0003:1130:F211.0002/input/input19
[   15.962686] hid-generic 0003:1130:F211.0002: input,hidraw1: USB HID v1.10 Device [USB  AUDIO  ] on usb-0000:00:03.0-1/input3
[   15.963441] input: USB  AUDIO   as /devices/pci0000:00/0000:00:03.0/usb2/2-1/2-1:1.4/0003:1130:F211.0003/input/input20
[   15.964979] hid-generic 0003:1130:F211.0003: input,hidraw2: USB HID v1.10 Device [USB  AUDIO  ] on usb-0000:00:03.0-1/input4
[   16.380094] [drm] fb mappable at 0xD0141000
[   16.380098] [drm] vram apper at 0xD0000000
[   16.380100] [drm] size 4096000
[   16.380101] [drm] fb depth is 24
[   16.380103] [drm]    pitch is 5120
[   16.380386] fbcon: radeondrmfb (fb0) is primary device
[   16.380504] Console: switching to colour frame buffer device 160x50
[   16.380541] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[   16.380544] radeon 0000:01:00.0: registered panic notifier
[   16.388074] [drm] Initialized radeon 2.39.0 20080528 for 0000:01:00.0 on minor 0
[   16.890227] scsi 4:0:0:0: Direct-Access     Generic- xD/SDMMC/MS/Pro  1.00 PQ: 0 ANSI: 0 CCS
[   16.890768] sd 4:0:0:0: Attached scsi generic sg2 type 0
[   16.892832] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[   17.520471] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   18.737428] init: failsafe main process (675) killed by TERM signal
[   20.254478] Bluetooth: RFCOMM TTY layer initialized
[   20.254500] Bluetooth: RFCOMM socket layer initialized
[   20.254512] Bluetooth: RFCOMM ver 1.11
[   20.366166] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   20.366172] Bluetooth: BNEP filters: protocol multicast
[   20.366189] Bluetooth: BNEP socket layer initialized
[   20.764925] init: cups main process (740) killed by HUP signal
[   20.764944] init: cups main process ended, respawning
[   22.944424] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   22.956487] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   23.255112] init: samba-ad-dc main process (848) terminated with status 1
[   25.640689] wlan0: authenticate with 00:1c:7b:78:7d:c3
[   25.649816] wlan0: send auth to 00:1c:7b:78:7d:c3 (try 1/3)
[   25.652226] wlan0: authenticated
[   25.656089] wlan0: associate with 00:1c:7b:78:7d:c3 (try 1/3)
[   25.659504] wlan0: RX AssocResp from 00:1c:7b:78:7d:c3 (capab=0x411 status=0 aid=6)
[   25.659612] wlan0: associated
[   25.659629] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   25.704743] wlan0: deauthenticating from 00:1c:7b:78:7d:c3 by local choice (Reason: 2=PREV_AUTH_NOT_VALID)
[   25.820636] wlan0: authenticate with 00:1c:7b:78:7d:c3
[   25.825162] wlan0: send auth to 00:1c:7b:78:7d:c3 (try 1/3)
[   25.825499] cfg80211: Calling CRDA to update world regulatory domain
[   25.828343] wlan0: authenticated
[   25.830053] cfg80211: World regulatory domain updated:
[   25.830056] cfg80211:  DFS Master region: unset
[   25.830056] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   25.830059] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   25.830061] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   25.830062] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[   25.830064] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   25.830066] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   25.836071] wlan0: associate with 00:1c:7b:78:7d:c3 (try 1/3)
[   25.838526] wlan0: RX AssocResp from 00:1c:7b:78:7d:c3 (capab=0x411 status=0 aid=6)
[   25.838627] wlan0: associated
[   32.984039] sis190 0000:00:04.0 eth0: auto-negotiating...
[   33.040203] audit_printk_skb: 33 callbacks suppressed
[   33.040208] audit: type=1400 audit(1430574221.567:23): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=1094 comm="apparmor_parser"
[   33.040221] audit: type=1400 audit(1430574221.567:24): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1094 comm="apparmor_parser"
[   33.040229] audit: type=1400 audit(1430574221.567:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1094 comm="apparmor_parser"
[   33.040851] audit: type=1400 audit(1430574221.567:26): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1094 comm="apparmor_parser"
[   33.040858] audit: type=1400 audit(1430574221.567:27): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1094 comm="apparmor_parser"
[   33.040915] audit: type=1400 audit(1430574221.567:28): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=1093 comm="apparmor_parser"
[   33.040923] audit: type=1400 audit(1430574221.567:29): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=1093 comm="apparmor_parser"
[   33.041162] audit: type=1400 audit(1430574221.567:30): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1094 comm="apparmor_parser"
[   33.041265] audit: type=1400 audit(1430574221.567:31): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=1093 comm="apparmor_parser"
[   33.051285] audit: type=1400 audit(1430574221.575:32): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=1097 comm="apparmor_parser"
[   35.384179] vboxdrv: module verification failed: signature and/or  required key missing - tainting kernel
[   35.388882] vboxdrv: Found 2 processor cores.
[   35.391218] vboxdrv: fAsync=0 offMin=0x1bc offMax=0xf9c
[   35.391412] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   35.391415] vboxdrv: Successfully loaded version 4.3.10_Ubuntu (interface 0x001a0007).
[   35.422477] vboxpci: IOMMU not found (not registered)
[   36.575558] init: plymouth-upstart-bridge main process ended, respawning
[   36.594665] init: plymouth-upstart-bridge main process ended, respawning
[   50.280680] audit_printk_skb: 123 callbacks suppressed
[   50.280686] audit: type=1400 audit(1430574238.810:74): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2208 comm="apparmor_parser"
[   50.280699] audit: type=1400 audit(1430574238.810:75): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2208 comm="apparmor_parser"
[   50.281266] audit: type=1400 audit(1430574238.810:76): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2208 comm="apparmor_parser"
[   62.482562] systemd-hostnamed[2529]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[  190.686064] perf interrupt took too long (2534 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[  273.818342] perf interrupt took too long (5091 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
[ 1014.833899] perf interrupt took too long (10009 > 10000), lowering kernel.perf_event_max_sample_rate to 12500
[ 4540.156071] ath5k: ath5k_hw_get_isr: ISR: 0x00000001 IMR: 0x00000000


Senin verdiğin sanırım kernel versiyonu ama yeni update ile bu zaten yüklendi...


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 02 Mayıs 2015 - 18:11:25
Neyseki kernel ile ilgili şu zamana kadar hiç sıkıntım olmadı Şey... en azından ubuntu tarafında, yada debian diyelim şuna. Arch tarafının aksine

[if]

Benim verdiğim ile güncelleme ile gelen çekirdek aynı değil @eronis. Bir kurup dener misin?

[eronis]

Bir süredir senin verdiğin çekirdekle kullanıyorum, pek bir sorunla karşılaşmadım senin verdiğin çekirdekle. Eğer sorun yeniden hortlarsa buraya yazabilir miyim ? Konu daha derli ve düzgün olur. Aynı şeyi 2. kez anlatmamış olurum.


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 05 Mayıs 2015 - 22:31:08
Aslına bakarsan ben yazılımsal değil donanımsal olabileceğini de hesaba kattım. Çünkü misal bilgisayarı yeniden başlatıyorum, grub ekranı yerine ekran mor kalıyor. Kapatma düğmesine basıp, sonra yeniden açmam gerekiyor misal. Ben power ile ilgil bir durum da olabileceğini düşünüyorum. Misal bilgisayarım açık iken (Benim bilgisayarımın kulaklık girişinde sorun var) 3d sound dongle'ı bilgisayarımda sürekli takılıdır, onun yanında 1 tane de flash bellek takınca (format için) bilgisayar milim kıpırdamıyor. Çok kasıyor, ikisini de çıkarsam dahi, reset atmadan hatta bazen bataryayı çıkarıp power tuşuna basmadan kendine gelmediği oluyor. Fast TSC Calibration error falan da veriyordu ubuntu ilk açıldığında.

[if]

@eronis, donanımsal bir sorun da olabilir. RAM testi yapmanızı öneririm. " Fast TSC Calibration error" uyarısı önemli değil, o sonradan düzeliyor.

[eronis]

Evet bir ara ram'ler ile ilgili sorun yaşadım. Belki de ondan kaynaklanıyordur. Bazen de işletim sistemini hiç açmıyor bile, şu başlangıçtaki ASUS logosunda takılıyor. Donanımsal bir kontrol gerektiğini seziyorum ben de...

Ayrıca benim bir 1TB'lık bir hard diskim var, onu diğer bilgisayarların hepsi okurken benim laptop'um hata veriyor. Taraması bile baya uzun sürdü, 2-3 günden bahsediyorum. Forumdaki arkadaşlar sağolsun yardım etmeyi denedi ama benim makinemden kaynaklandığını düşünüyorum artık...

[eronis]

Sorunu çözdüm. Laptop'un içini açtım, içini temizledim, ne olur ne olmaz diye ram'leri çıkarıp, taktım. Artık aynı hatayı vermiyor. Sanıyorum ki bilgisayarın içn tozlanmasından kaynaklanıyormuş, zaten baya açılır açılmaz fanı deli gibi ses çıkarıyordu.