[Çözüldü] plymouth-upstart-bridge Kaynaklı Yavaş Açılma

[mutlucan96]

dmesg kayıtlarına bakarak şu kısımda uzun süre takılıyor:

Kod Seç Genişlet

init: plymouth-upstart-bridge main process (238) killed by TERM signal

[heartsmagic]

Mümkünse tüm çıktıyı buraya geçer misin?

[mutlucan96]

Kod Seç Genişlet

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-29-generic (buildd@tipua) (gcc version 4.9.1 (Ubuntu 4.9.1-16ubuntu6) ) #39-Ubuntu SMP Mon Dec 15 22:27:29 UTC 2014 (Ubuntu 3.16.0-29.39-generic 3.16.7-ckt2)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-29-generic root=UUID=5c12f75c-403c-473f-9e61-4adb2a5f2339 ro persistent quiet noplymouth enable_mtrr_cleanup raid=noautodetect
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000997ff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000099800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf63efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf63f000-0x00000000bf6befff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bf6bf000-0x00000000bf7befff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bf7bf000-0x00000000bf7fefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bf7ff000-0x00000000bf7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf800000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bf7fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LG Electronics A520-K.AC5RT/QLH  , BIOS QLHLU262 12/07/2011
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x1bf800 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-protect
[    0.000000]   E8000-EFFFF write-combining
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0BF800000 mask FFF800000 uncachable
[    0.000000]   3 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   4 base 100000000 mask F80000000 write-back
[    0.000000]   5 base 180000000 mask FC0000000 write-back
[    0.000000]   6 base 1BF800000 mask FFF800000 uncachable
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000093000] 93000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01fd2000, 0x01fd2fff] PGTABLE
[    0.000000] BRK [0x01fd3000, 0x01fd3fff] PGTABLE
[    0.000000] BRK [0x01fd4000, 0x01fd4fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x1bf600000-0x1bf7fffff]
[    0.000000]  [mem 0x1bf600000-0x1bf7fffff] page 2M
[    0.000000] BRK [0x01fd5000, 0x01fd5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x1bc000000-0x1bf5fffff]
[    0.000000]  [mem 0x1bc000000-0x1bf5fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x180000000-0x1bbffffff]
[    0.000000]  [mem 0x180000000-0x1bbffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xbf63efff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0xbf5fffff] page 2M
[    0.000000]  [mem 0xbf600000-0xbf63efff] page 4k
[    0.000000] init_memory_mapping: [mem 0xbf7ff000-0xbf7fffff]
[    0.000000]  [mem 0xbf7ff000-0xbf7fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff]
[    0.000000]  [mem 0x100000000-0x17fffffff] page 2M
[    0.000000] BRK [0x01fd6000, 0x01fd6fff] PGTABLE
[    0.000000] BRK [0x01fd7000, 0x01fd7fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x350ec000-0x3686dfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 LGE   )
[    0.000000] ACPI: XSDT 0x00000000BF7FE120 00008C (v01 LGE    LGPC     00000001      01000013)
[    0.000000] ACPI: FACP 0x00000000BF7FC000 0000F4 (v04 LGE    LGPC     00000001 ACPI 00040000)
[    0.000000] ACPI: DSDT 0x00000000BF7E9000 00F4E4 (v01 LGE    LGPC     00000000 ACPI 00040000)
[    0.000000] ACPI: FACS 0x00000000BF76E000 000040
[    0.000000] ACPI: ASF! 0x00000000BF7FD000 0000A5 (v32 LGE    LGPC     00000001 ACPI 00040000)
[    0.000000] ACPI: HPET 0x00000000BF7FB000 000038 (v01 LGE    LGPC     00000001 ACPI 00040000)
[    0.000000] ACPI: APIC 0x00000000BF7FA000 00008C (v02 LGE    LGPC     00000001 ACPI 00040000)
[    0.000000] ACPI: MCFG 0x00000000BF7F9000 00003C (v01 LGE    LGPC     00000001 ACPI 00040000)
[    0.000000] ACPI: SLIC 0x00000000BF7E8000 000176 (v01 LGE    LGPC     00000001 ACPI 00040000)
[    0.000000] ACPI: WDAT 0x00000000BF7E7000 000224 (v01 LGE    LGPC     00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x00000000BF7E6000 0001DE (v01 LGE    LGPC     00001000 ACPI 00040000)
[    0.000000] ACPI: BOOT 0x00000000BF7E4000 000028 (v01 LGE    LGPC     00000001 ACPI 00040000)
[    0.000000] ACPI: ASPT 0x00000000BF7E1000 000034 (v07 LGE    LGPC     00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x00000000BF7E0000 000780 (v01 LGE    LGPC     00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x00000000BF7DF000 000996 (v01 LGE    LGPC     00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x00000000BF7DA000 004BE3 (v01 LGE    LGPC     00001000 ACPI 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000001bf7fffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x1bf7fffff]
[    0.000000]   NODE_DATA [mem 0x1bf7f8000-0x1bf7fcfff]
[    0.000000]  [ffffea0000000000-ffffea0006ffffff] PMD -> [ffff8801b8e00000-ffff8801bedfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x1bf7fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x00098fff]
[    0.000000]   node   0: [mem 0x00100000-0xbf63efff]
[    0.000000]   node   0: [mem 0xbf7ff000-0xbf7fffff]
[    0.000000]   node   0: [mem 0x100000000-0x1bf7fffff]
[    0.000000] On node 0 totalpages: 1568216
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3992 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12185 pages used for memmap
[    0.000000]   DMA32 zone: 779840 pages, LIFO batch:31
[    0.000000]   Normal zone: 12256 pages used for memmap
[    0.000000]   Normal zone: 784384 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x00099000-0x00099fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009a000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf63f000-0xbf6befff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf6bf000-0xbf7befff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf7bf000-0xbf7fefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
[    0.000000] e820: [mem 0xc0000000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff8801bf400000 s83328 r8192 d23168 u262144
[    0.000000] pcpu-alloc: s83328 r8192 d23168 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1543690
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-29-generic root=UUID=5c12f75c-403c-473f-9e61-4adb2a5f2339 ro persistent quiet noplymouth enable_mtrr_cleanup raid=noautodetect
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 6066948K/6272864K available (7740K kernel code, 1200K rwdata, 3608K rodata, 1356K init, 1308K bss, 205916K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[    0.000000] Offload RCU callbacks from all CPUs
[    0.000000] Offload RCU callbacks from CPUs: 0-7.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS:16640 nr_irqs:744 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 25165824 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2294.785 MHz processor
[    0.000037] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.57 BogoMIPS (lpj=9179140)
[    0.000039] pid_max: default: 32768 minimum: 301
[    0.000046] ACPI: Core revision 20140424
[    0.010642] ACPI: All ACPI Tables successfully acquired
[    0.021454] Security Framework initialized
[    0.021473] AppArmor: AppArmor initialized
[    0.021474] Yama: becoming mindful.
[    0.022031] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.023728] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.024483] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.024494] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.024719] Initializing cgroup subsys memory
[    0.024744] Initializing cgroup subsys devices
[    0.024750] Initializing cgroup subsys freezer
[    0.024753] Initializing cgroup subsys net_cls
[    0.024757] Initializing cgroup subsys blkio
[    0.024760] Initializing cgroup subsys perf_event
[    0.024762] Initializing cgroup subsys net_prio
[    0.024768] Initializing cgroup subsys hugetlb
[    0.024791] CPU: Physical Processor ID: 0
[    0.024792] CPU: Processor Core ID: 0
[    0.024796] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.024799] mce: CPU supports 7 MCE banks
[    0.024807] CPU0: Thermal monitoring handled by SMI
[    0.024817] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 6
[    0.024943] Freeing SMP alternatives memory: 32K (ffffffff81e81000 - ffffffff81e89000)
[    0.026354] ftrace: allocating 29305 entries in 115 pages
[    0.041948] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.081613] smpboot: CPU0: Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz (fam: 06, model: 2a, stepping: 07)
[    0.081622] TSC deadline timer enabled
[    0.081647] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[    0.081667] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
[    0.081670] ... version:                3
[    0.081671] ... bit width:              48
[    0.081672] ... generic registers:      4
[    0.081673] ... value mask:             0000ffffffffffff
[    0.081674] ... max period:             0000ffffffffffff
[    0.081675] ... fixed-purpose events:   3
[    0.081676] ... event mask:             000000070000000f
[    0.083501] x86: Booting SMP configuration:
[    0.083503] .... node  #0, CPUs:      #1
[    0.094450] CPU1: Thermal monitoring handled by SMI
[    0.096617] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.096708]  #2
[    0.107751] CPU2: Thermal monitoring handled by SMI
[    0.109930]  #3
[    0.120972] CPU3: Thermal monitoring handled by SMI
[    0.123075] x86: Booted up 1 node, 4 CPUs
[    0.123079] smpboot: Total of 4 processors activated (18358.28 BogoMIPS)
[    0.126474] devtmpfs: initialized
[    0.129068] evm: security.selinux
[    0.129070] evm: security.SMACK64
[    0.129071] evm: security.SMACK64EXEC
[    0.129072] evm: security.SMACK64TRANSMUTE
[    0.129072] evm: security.SMACK64MMAP
[    0.129073] evm: security.ima
[    0.129074] evm: security.capability
[    0.129145] PM: Registering ACPI NVS region [mem 0xbf6bf000-0xbf7befff] (1048576 bytes)
[    0.130068] pinctrl core: initialized pinctrl subsystem
[    0.130142] regulator-dummy: no parameters
[    0.130178] RTC time: 12:50:20, date: 03/12/15
[    0.130230] NET: Registered protocol family 16
[    0.130404] cpuidle: using governor ladder
[    0.130406] cpuidle: using governor menu
[    0.130472] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.130473] ACPI: bus type PCI registered
[    0.130475] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.130557] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.130560] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.130647] PCI: Using configuration type 1 for base access
[    0.130872] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.130873] mtrr: probably your BIOS does not setup all CPUs.
[    0.130874] mtrr: corrected configuration.
[    0.135569] ACPI: Added _OSI(Module Device)
[    0.135571] ACPI: Added _OSI(Processor Device)
[    0.135572] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.135574] ACPI: Added _OSI(Processor Aggregator Device)
[    0.138826] ACPI: Executed 1 blocks of module-level executable AML code
[    0.151147] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.155837] ACPI: Dynamic OEM Table Load:
[    0.155846] ACPI: SSDT 0xFFFF8801B5DD8800 000667 (v01 PmRef  Cpu0Cst  00003001 INTL 20100121)
[    0.159361] ACPI: Dynamic OEM Table Load:
[    0.159368] ACPI: SSDT 0xFFFF8801B62E9400 000303 (v01 PmRef  ApIst    00003000 INTL 20100121)
[    0.163241] ACPI: Dynamic OEM Table Load:
[    0.163247] ACPI: SSDT 0xFFFF8801B5DD4000 000119 (v01 PmRef  ApCst    00003000 INTL 20100121)
[    0.176576] ACPI: Interpreter enabled
[    0.176584] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[    0.176589] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.176604] ACPI: (supports S0 S3 S4 S5)
[    0.176605] ACPI: Using IOAPIC for interrupt routing
[    0.176631] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.184412] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.184418] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.184449] \_SB_.PCI0:_OSC invalid UUID
[    0.184451] _OSC request data:1 1f 0
[    0.184455] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.185051] PCI host bridge to bus 0000:00
[    0.185054] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.185056] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.185058] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.185060] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.185062] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff]
[    0.185070] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.185156] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.185190] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.185225] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.185295] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.185321] pci 0000:00:16.0: reg 0x10: [mem 0xd5304000-0xd530400f 64bit]
[    0.185400] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.185486] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.185762] pci 0000:00:1a.0: reg 0x10: [mem 0xd5309000-0xd53093ff]
[    0.187351] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.187436] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.187455] pci 0000:00:1b.0: reg 0x10: [mem 0xd5300000-0xd5303fff 64bit]
[    0.187532] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.187572] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.187613] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.187696] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.187739] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.187781] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[    0.187866] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.187907] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.187949] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    0.188032] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.188074] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.188122] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.188394] pci 0000:00:1d.0: reg 0x10: [mem 0xd5308000-0xd53083ff]
[    0.189975] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.190040] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.190083] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[    0.190261] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    0.190282] pci 0000:00:1f.2: reg 0x10: [io  0x5048-0x504f]
[    0.190290] pci 0000:00:1f.2: reg 0x14: [io  0x5054-0x5057]
[    0.190299] pci 0000:00:1f.2: reg 0x18: [io  0x5040-0x5047]
[    0.190307] pci 0000:00:1f.2: reg 0x1c: [io  0x5050-0x5053]
[    0.190316] pci 0000:00:1f.2: reg 0x20: [io  0x5020-0x503f]
[    0.190325] pci 0000:00:1f.2: reg 0x24: [mem 0xd5307000-0xd53077ff]
[    0.190372] pci 0000:00:1f.2: PME# supported from D3hot
[    0.190451] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.190468] pci 0000:00:1f.3: reg 0x10: [mem 0xd5305000-0xd53050ff 64bit]
[    0.190490] pci 0000:00:1f.3: reg 0x20: [io  0x5000-0x501f]
[    0.190624] pci 0000:01:00.0: [10de:1050] type 00 class 0x030000
[    0.190635] pci 0000:01:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff]
[    0.190645] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.190655] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.190661] pci 0000:01:00.0: reg 0x24: [io  0x4000-0x407f]
[    0.190668] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[    0.190754] pci 0000:01:00.1: [10de:0e08] type 00 class 0x040300
[    0.190765] pci 0000:01:00.1: reg 0x10: [mem 0xd3000000-0xd3003fff]
[    0.195214] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.195222] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    0.195229] pci 0000:00:01.0:   bridge window [mem 0xd2000000-0xd30fffff]
[    0.195239] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.195367] pci 0000:07:00.0: [1814:3090] type 00 class 0x028000
[    0.195391] pci 0000:07:00.0: reg 0x10: [mem 0xd5200000-0xd520ffff]
[    0.195586] pci 0000:07:00.0: System wakeup disabled by ACPI
[    0.203221] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.203236] pci 0000:00:1c.0:   bridge window [mem 0xd5200000-0xd52fffff]
[    0.203367] pci 0000:08:00.0: [1969:1083] type 00 class 0x020000
[    0.203401] pci 0000:08:00.0: reg 0x10: [mem 0xd5100000-0xd513ffff 64bit]
[    0.203416] pci 0000:08:00.0: reg 0x18: [io  0x3000-0x307f]
[    0.203556] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.203606] pci 0000:08:00.0: System wakeup disabled by ACPI
[    0.211224] pci 0000:00:1c.1: PCI bridge to [bus 08]
[    0.211234] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.211243] pci 0000:00:1c.1:   bridge window [mem 0xd5100000-0xd51fffff]
[    0.211354] pci 0000:00:1c.3: PCI bridge to [bus 09-0e]
[    0.211359] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.211363] pci 0000:00:1c.3:   bridge window [mem 0xd4100000-0xd50fffff]
[    0.211370] pci 0000:00:1c.3:   bridge window [mem 0xd3100000-0xd40fffff 64bit pref]
[    0.211926] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.211976] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.212024] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.212073] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.212120] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.212168] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.212215] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.212262] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.212351] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.212392] ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[    0.212490] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.212492] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.212494] vgaarb: loaded
[    0.212495] vgaarb: bridge control possible 0000:01:00.0
[    0.212732] SCSI subsystem initialized
[    0.212784] libata version 3.00 loaded.
[    0.212811] ACPI: bus type USB registered
[    0.212829] usbcore: registered new interface driver usbfs
[    0.212839] usbcore: registered new interface driver hub
[    0.212861] usbcore: registered new device driver usb
[    0.212997] PCI: Using ACPI for IRQ routing
[    0.214554] PCI: pci_cache_line_size set to 64 bytes
[    0.214601] e820: reserve RAM buffer [mem 0x00099800-0x0009ffff]
[    0.214603] e820: reserve RAM buffer [mem 0xbf63f000-0xbfffffff]
[    0.214604] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
[    0.214606] e820: reserve RAM buffer [mem 0x1bf800000-0x1bfffffff]
[    0.214724] NetLabel: Initializing
[    0.214725] NetLabel:  domain hash size = 128
[    0.214726] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.214738] NetLabel:  unlabeled traffic allowed by default
[    0.214815] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.214821] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.217866] Switched to clocksource hpet
[    0.223549] AppArmor: AppArmor Filesystem Enabled
[    0.223587] pnp: PnP ACPI init
[    0.223602] ACPI: bus type PNP registered
[    0.224314] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.224317] system 00:00: [io  0x1000-0x100f] has been reserved
[    0.224319] system 00:00: [io  0x0810-0x0813] has been reserved
[    0.224321] system 00:00: [io  0xffff] has been reserved
[    0.224323] system 00:00: [io  0x0400-0x0453] could not be reserved
[    0.224325] system 00:00: [io  0x0454-0x0457] has been reserved
[    0.224327] system 00:00: [io  0x0458-0x047f] has been reserved
[    0.224329] system 00:00: [io  0x0500-0x057f] has been reserved
[    0.224331] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.224332] system 00:00: [io  0x0380-0x0387] has been reserved
[    0.224334] system 00:00: [io  0x06a0-0x06a7] has been reserved
[    0.224338] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.224372] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.224407] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.224476] pnp 00:03: Plug and Play ACPI device, IDs SYN1308 SYN1300 SYN0002 PNP0f13 (active)
[    0.224673] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.224675] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.224677] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.224679] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.224681] system 00:04: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.224683] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.224685] system 00:04: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.224687] system 00:04: [mem 0xff000000-0xffffffff] could not be reserved
[    0.224689] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.224691] system 00:04: [mem 0xd5400000-0xd5400fff] has been reserved
[    0.224694] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.224919] system 00:05: [mem 0x20000000-0x201fffff] could not be reserved
[    0.224921] system 00:05: [mem 0x40000000-0x401fffff] could not be reserved
[    0.224924] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.224938] pnp: PnP ACPI: found 6 devices
[    0.224940] ACPI: bus type PNP unregistered
[    0.231496] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[    0.231531] pci 0000:01:00.0: BAR 6: assigned [mem 0xd3080000-0xd30fffff pref]
[    0.231533] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.231536] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    0.231539] pci 0000:00:01.0:   bridge window [mem 0xd2000000-0xd30fffff]
[    0.231542] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.231545] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.231551] pci 0000:00:1c.0:   bridge window [mem 0xd5200000-0xd52fffff]
[    0.231560] pci 0000:00:1c.1: PCI bridge to [bus 08]
[    0.231563] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.231568] pci 0000:00:1c.1:   bridge window [mem 0xd5100000-0xd51fffff]
[    0.231577] pci 0000:00:1c.3: PCI bridge to [bus 09-0e]
[    0.231581] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.231586] pci 0000:00:1c.3:   bridge window [mem 0xd4100000-0xd50fffff]
[    0.231590] pci 0000:00:1c.3:   bridge window [mem 0xd3100000-0xd40fffff 64bit pref]
[    0.231598] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.231600] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.231601] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.231603] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfeafffff]
[    0.231605] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    0.231607] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd30fffff]
[    0.231609] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.231611] pci_bus 0000:07: resource 1 [mem 0xd5200000-0xd52fffff]
[    0.231613] pci_bus 0000:08: resource 0 [io  0x3000-0x3fff]
[    0.231615] pci_bus 0000:08: resource 1 [mem 0xd5100000-0xd51fffff]
[    0.231616] pci_bus 0000:09: resource 0 [io  0x2000-0x2fff]
[    0.231618] pci_bus 0000:09: resource 1 [mem 0xd4100000-0xd50fffff]
[    0.231620] pci_bus 0000:09: resource 2 [mem 0xd3100000-0xd40fffff 64bit pref]
[    0.231651] NET: Registered protocol family 2
[    0.231850] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.232014] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.232144] TCP: Hash tables configured (established 65536 bind 65536)
[    0.232166] TCP: reno registered
[    0.232177] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.232208] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.232280] NET: Registered protocol family 1
[    0.262015] pci 0000:01:00.0: Video device with shadowed ROM
[    0.262033] PCI: CLS 64 bytes, default 64
[    0.262094] Trying to unpack rootfs image as initramfs...
[    0.658959] Freeing initrd memory: 24072K (ffff8800350ec000 - ffff88003686e000)
[    0.659014] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.659018] software IO TLB [mem 0xbb63f000-0xbf63f000] (64MB) mapped at [ffff8800bb63f000-ffff8800bf63efff]
[    0.659080] Simple Boot Flag at 0x44 set to 0x1
[    0.659266] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    0.659307] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x23
[    0.659314] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x23
[    0.659319] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x23
[    0.659326] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x23
[    0.659386] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.659411] Scanning for low memory corruption every 60 seconds
[    0.659754] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.659779] Initialise system trusted keyring
[    0.659802] audit: initializing netlink subsys (disabled)
[    0.659819] audit: type=2000 audit(1426164620.648:1): initialized
[    0.660166] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.661716] zpool: loaded
[    0.661720] zbud: loaded
[    0.661899] VFS: Disk quotas dquot_6.5.2
[    0.661937] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.662412] fuse init (API version 7.23)
[    0.662504] msgmni has been set to 11896
[    0.662566] Key type big_key registered
[    0.662982] Key type asymmetric registered
[    0.662986] Asymmetric key parser 'x509' registered
[    0.663022] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.663067] io scheduler noop registered
[    0.663070] io scheduler deadline registered (default)
[    0.663118] io scheduler cfq registered
[    0.663301] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.663676] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.663692] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.663740] vesafb: mode is 1366x768x32, linelength=5472, pages=0
[    0.663741] vesafb: scrolling: redraw
[    0.663743] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.663758] vesafb: framebuffer at 0xd1000000, mapped to 0xffffc90004f00000, using 4160k, total 4160k
[    0.720255] Console: switching to colour frame buffer device 170x48
[    0.776559] fb0: VESA VGA frame buffer device
[    0.776596] intel_idle: MWAIT substates: 0x21120
[    0.776598] intel_idle: v0.4 model 0x2A
[    0.776599] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.777739] ACPI: AC Adapter [ACAD] (on-line)
[    0.777824] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.777829] ACPI: Power Button [PWRB]
[    0.777865] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.777867] ACPI: Sleep Button [SLPB]
[    0.777905] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    0.778701] ACPI: Lid Switch [LID0]
[    0.778748] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.778750] ACPI: Power Button [PWRF]
[    0.783430] thermal LNXTHERM:00: registered as thermal_zone0
[    0.783433] ACPI: Thermal Zone [TZ01] (51 C)
[    0.783475] GHES: HEST is not enabled!
[    0.783574] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.785379] Linux agpgart interface v0.103
[    0.786964] brd: module loaded
[    0.787720] loop: module loaded
[    0.787974] libphy: Fixed MDIO Bus: probed
[    0.787978] tun: Universal TUN/TAP device driver, 1.6
[    0.787979] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.788021] PPP generic driver version 2.4.2
[    0.788068] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.788074] ehci-pci: EHCI PCI platform driver
[    0.788176] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.788182] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.788196] ehci-pci 0000:00:1a.0: debug port 2
[    0.792093] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.792118] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd5309000
[    0.796416] ACPI: Battery Slot [BAT0] (battery present)
[    0.801695] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.801783] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.801785] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.801787] usb usb1: Product: EHCI Host Controller
[    0.801789] usb usb1: Manufacturer: Linux 3.16.0-29-generic ehci_hcd
[    0.801791] usb usb1: SerialNumber: 0000:00:1a.0
[    0.802028] hub 1-0:1.0: USB hub found
[    0.802036] hub 1-0:1.0: 2 ports detected
[    0.802255] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.802261] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.802277] ehci-pci 0000:00:1d.0: debug port 2
[    0.806186] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.806211] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd5308000
[    0.817665] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.817764] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.817767] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.817769] usb usb2: Product: EHCI Host Controller
[    0.817771] usb usb2: Manufacturer: Linux 3.16.0-29-generic ehci_hcd
[    0.817773] usb usb2: SerialNumber: 0000:00:1d.0
[    0.818004] hub 2-0:1.0: USB hub found
[    0.818012] hub 2-0:1.0: 2 ports detected
[    0.818162] ehci-platform: EHCI generic platform driver
[    0.818178] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.818189] ohci-pci: OHCI PCI platform driver
[    0.818204] ohci-platform: OHCI generic platform driver
[    0.818214] uhci_hcd: USB Universal Host Controller Interface driver
[    0.818289] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.821658] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.821665] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.822029] mousedev: PS/2 mouse device common for all mice
[    0.822706] rtc_cmos 00:01: RTC can wake from S4
[    0.822878] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.822909] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.822980] device-mapper: uevent: version 1.0.3
[    0.823092] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    0.823105] Intel P-state driver initializing.
[    0.823124] Intel pstate controlling: cpu 0
[    0.823144] Intel pstate controlling: cpu 1
[    0.823210] Intel pstate controlling: cpu 2
[    0.823244] Intel pstate controlling: cpu 3
[    0.823267] Consider also installing thermald for improved thermal control.
[    0.823272] ledtrig-cpu: registered to indicate activity on CPUs
[    0.823364] TCP: cubic registered
[    0.823459] NET: Registered protocol family 10
[    0.823645] NET: Registered protocol family 17
[    0.823655] Key type dns_resolver registered
[    0.823990] Loading compiled-in X.509 certificates
[    0.824845] Loaded X.509 cert 'Magrathea: Glacier signing key: 70637fde89462678aff2d9c2bb1290be2fed1fb1'
[    0.824860] registered taskstats version 1
[    0.826676] Key type trusted registered
[    0.828166] Key type encrypted registered
[    0.829625] AppArmor: AppArmor sha1 policy hashing enabled
[    0.829630] ima: No TPM chip found, activating TPM-bypass!
[    0.829645] evm: HMAC attrs: 0x1
[    0.830047]   Magic number: 7:940:834
[    0.830149] rtc_cmos 00:01: setting system clock to 2015-03-12 12:50:20 UTC (1426164620)
[    0.830225] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.830226] EDD information not available.
[    0.830289] PM: Hibernation image not present or could not be loaded.
[    0.831533] Freeing unused kernel memory: 1356K (ffffffff81d2e000 - ffffffff81e81000)
[    0.831535] Write protecting the kernel read-only data: 12288k
[    0.832487] Freeing unused kernel memory: 440K (ffff880001792000 - ffff880001800000)
[    0.833463] Freeing unused kernel memory: 488K (ffff880001b86000 - ffff880001c00000)
[    0.842979] systemd-udevd[125]: starting version 208
[    0.843398] random: systemd-udevd urandom read with 3 bits of entropy available
[    0.885584] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    0.893173] ACPI: Video Device [VGA] (multi-head: yes  rom: yes  post: no)
[    0.903489] ahci 0000:00:1f.2: version 3.0
[    1.017477] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[    1.017531] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[    1.017534] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[    1.025950] scsi0 : ahci
[    1.026053] scsi1 : ahci
[    1.026371] scsi2 : ahci
[    1.026498] scsi3 : ahci
[    1.029516] scsi4 : ahci
[    1.029667] scsi5 : ahci
[    1.029733] ata1: SATA max UDMA/133 abar m2048@0xd5307000 port 0xd5307100 irq 41
[    1.029737] ata2: SATA max UDMA/133 abar m2048@0xd5307000 port 0xd5307180 irq 41
[    1.029739] ata3: DUMMY
[    1.029740] ata4: DUMMY
[    1.029743] ata5: DUMMY
[    1.029745] ata6: DUMMY
[    1.046830] atl1c 0000:08:00.0: version 1.0.1.1-NAPI
[    1.113449] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.136278] acpi device:36: registered as cooling_device4
[    1.136330] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2c/LNXVIDEO:01/input/input7
[    1.245980] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.245991] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.246370] hub 1-1:1.0: USB hub found
[    1.246461] hub 1-1:1.0: 6 ports detected
[    1.349379] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.349420] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.352035] ata2.00: ATAPI: HL-DT-STDVDRAM GT40N, SL03, max UDMA/100
[    1.355099] ata2.00: configured for UDMA/100
[    1.357465] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.479098] ata1.00: ATA-9: ST1000LM014-1EJ164, SM11, max UDMA/133
[    1.479109] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.489839] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.489843] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.490098] hub 2-1:1.0: USB hub found
[    1.490212] hub 2-1:1.0: 6 ports detected
[    1.523466] ata1.00: configured for UDMA/133
[    1.523677] scsi 0:0:0:0: Direct-Access     ATA      ST1000LM014-1EJ1 SM11 PQ: 0 ANSI: 5
[    1.524076] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.524081] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.524109] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.524128] sd 0:0:0:0: [sda] Write Protect is off
[    1.524130] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.524149] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.524695]  sda: sda1 sda2 sda3 sda4
[    1.524959] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.527091] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GT40N     SL03 PQ: 0 ANSI: 5
[    1.544559] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.544563] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.544761] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.544852] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.577455] usb 1-1.3: new full-speed USB device number 4 using ehci-pci
[    1.657214] tsc: Refined TSC clocksource calibration: 2294.788 MHz
[    1.711651] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04773/0xa40000/0xa0000, board id: 3655, fw id: 590211
[    1.752087] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[    1.866507] usb 1-1.3: New USB device found, idVendor=13d3, idProduct=3314
[    1.866511] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.937402] usb 1-1.4: new full-speed USB device number 5 using ehci-pci
[    2.031439] usb 1-1.4: New USB device found, idVendor=08ff, idProduct=1686
[    2.031450] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.031455] usb 1-1.4: Product: Fingerprint Sensor
[    2.101200] usb 1-1.5: new high-speed USB device number 6 using ehci-pci
[    2.205960] usb 1-1.5: New USB device found, idVendor=0bda, idProduct=0138
[    2.205971] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.205977] usb 1-1.5: Product: USB2.0-CRW
[    2.205982] usb 1-1.5: Manufacturer: Generic
[    2.205987] usb 1-1.5: SerialNumber: 20090516388200000
[    2.214953] usbcore: registered new interface driver usb-storage
[    2.216276] usbcore: registered new interface driver uas
[    2.217465] ums-realtek 1-1.5:1.0: USB Mass Storage device detected
[    2.233197] scsi6 : usb-storage 1-1.5:1.0
[    2.233269] usbcore: registered new interface driver ums-realtek
[    2.424852] usb 2-1.3: new full-speed USB device number 3 using ehci-pci
[    2.519781] usb 2-1.3: New USB device found, idVendor=046d, idProduct=c52f
[    2.519784] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.519786] usb 2-1.3: Product: USB Receiver
[    2.519787] usb 2-1.3: Manufacturer: Logitech
[    2.525210] hidraw: raw HID events driver (C) Jiri Kosina
[    2.530845] usbcore: registered new interface driver usbhid
[    2.530847] usbhid: USB HID core driver
[    2.532198] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:046D:C52F.0001/input/input8
[    2.532314] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.3/input0
[    2.532940] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/0003:046D:C52F.0002/input/input9
[    2.533069] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.3/input1
[    2.656800] Switched to clocksource tsc
[    3.037926] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    3.235559] scsi 6:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
[    3.235798] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    3.919418] sd 6:0:0:0: [sdb] 15523840 512-byte logical blocks: (7.94 GB/7.40 GiB)
[    3.920561] sd 6:0:0:0: [sdb] Write Protect is off
[    3.920565] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[    3.921687] sd 6:0:0:0: [sdb] No Caching mode page found
[    3.922048] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    3.927692]  sdb: sdb1
[    3.930685] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    4.575859] usb 1-1.2: new high-speed USB device number 15 using ehci-pci
[    4.831694] usb 1-1.2: new high-speed USB device number 16 using ehci-pci
[    4.901370] random: nonblocking pool is initialized
[    5.087637] usb 1-1.2: new high-speed USB device number 17 using ehci-pci
[    5.343336] usb 1-1.2: new high-speed USB device number 18 using ehci-pci
[    5.412235] init: plymouth-upstart-bridge main process (241) killed by TERM signal
[    6.753203] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    6.841720] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    7.134583] usb 1-1.2: new high-speed USB device number 25 using ehci-pci
[    7.310615] systemd-udevd[407]: starting version 208
[    7.531457] lp: driver loaded but no devices found
[    7.535589] ppdev: user-space parallel port driver
[    7.646234] usb 1-1.2: new high-speed USB device number 27 using ehci-pci
[    7.898120] usb 1-1.2: new high-speed USB device number 28 using ehci-pci
[    8.002410] usb 1-1.2: device descriptor read/all, error -71
[    8.217925] usb 1-1.2: new high-speed USB device number 30 using ehci-pci
[    8.342485] usb 1-1.2: unable to read config index 0 descriptor/start: -71
[    8.342930] usb 1-1.2: can't read configurations, error -71
[    8.557850] usb 1-1.2: new high-speed USB device number 32 using ehci-pci
[    8.750031] usb 1-1.2: New USB device found, idVendor=064e, idProduct=a118
[    8.750037] usb 1-1.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    8.750039] usb 1-1.2: Product: LG Webcam
[    8.750040] usb 1-1.2: Manufacturer: SuYin
[    8.750042] usb 1-1.2: SerialNumber: CN1316-T803-HN02S-VL-R01.02.04
[    8.995855] wmi: Mapper loaded
[    9.000331] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
[    9.008430] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140424/utaddress-258)
[    9.008439] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.008444] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
[    9.008448] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.GPIO) (20140424/utaddress-258)
[    9.008453] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20140424/utaddress-258)
[    9.008457] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.008459] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
[    9.008463] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.GPIO) (20140424/utaddress-258)
[    9.008467] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20140424/utaddress-258)
[    9.008472] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.008473] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
[    9.008477] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.GPIO) (20140424/utaddress-258)
[    9.008481] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20140424/utaddress-258)
[    9.008486] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.008487] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    9.039596] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    9.059261] device-mapper: multipath: version 1.7.0 loaded
[    9.153622] AVX version of gcm_enc/dec engaged.
[    9.267312] cfg80211: Calling CRDA to update world regulatory domain
[    9.282156] Bluetooth: Core ver 2.19
[    9.282179] NET: Registered protocol family 31
[    9.282181] Bluetooth: HCI device and connection manager initialized
[    9.282188] Bluetooth: HCI socket layer initialized
[    9.282191] Bluetooth: L2CAP socket layer initialized
[    9.282204] Bluetooth: SCO socket layer initialized
[    9.298634] usbcore: registered new interface driver btusb
[    9.340763] [drm] Initialized drm 1.1.0 20060810
[    9.492917] usb 1-1.2: USB disconnect, device number 32
[    9.945120] usb 1-1.2: new high-speed USB device number 34 using ehci-pci
[   10.077862] media: Linux media interface: v0.10
[   10.136873] usb 1-1.2: New USB device found, idVendor=064e, idProduct=a118
[   10.136886] usb 1-1.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[   10.136891] usb 1-1.2: Product: LG Webcam
[   10.136897] usb 1-1.2: Manufacturer: SuYin
[   10.136902] usb 1-1.2: SerialNumber: CN1316-T803-HN02S-VL-R01.02.04
[   10.260611] usb 1-1.2: USB disconnect, device number 34
[   10.344112] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[   10.344197] snd_hda_intel 0000:01:00.1: Disabling MSI
[   10.344204] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[   10.460849] usb 1-1.2: new high-speed USB device number 35 using ehci-pci
[   10.522519] Linux video capture interface: v2.00
[   10.535142] usbcore: registered new interface driver uvcvideo
[   10.535144] USB Video Class driver (1.1.1)
[   10.565908] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   10.565913] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   10.565914] sound hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   10.565916] sound hdaudioC0D0:    mono: mono_out=0x0
[   10.565917] sound hdaudioC0D0:    inputs:
[   10.565919] sound hdaudioC0D0:      Mic=0x18
[   10.565921] sound hdaudioC0D0:      Internal Mic=0x12
[   10.571014] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   10.571082] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   10.577076] usb 1-1.2: unable to read config index 0 descriptor/start: -71
[   10.577546] usb 1-1.2: can't read configurations, error -71
[   10.591103] intel_rapl: Found RAPL domain package
[   10.591109] intel_rapl: Found RAPL domain core
[   10.668845] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[   10.792586] usb 1-1.2: new high-speed USB device number 37 using ehci-pci
[   10.889769] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3090, rev 3213 detected
[   10.893306] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected
[   10.926697] cfg80211: World regulatory domain updated:
[   10.926700] cfg80211:  DFS Master region: unset
[   10.926701] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   10.926704] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   10.926705] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   10.926707] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[   10.926708] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   10.926710] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   11.024496] usb 1-1.2: new high-speed USB device number 38 using ehci-pci
[   11.174268] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   11.252354] usb 1-1.2: new high-speed USB device number 39 using ehci-pci
[   11.262475] nvidia: module license 'NVIDIA' taints kernel.
[   11.262478] Disabling lock debugging due to kernel taint
[   11.265633] nvidia: module verification failed: signature and/or  required key missing - tainting kernel
[   11.269556] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[   11.269741] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
[   11.269748] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  331.113  Mon Dec  1 21:08:13 PST 2014
[   11.294581] audit: type=1400 audit(1426157430.966:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=835 comm="apparmor_parser"
[   11.294588] audit: type=1400 audit(1426157430.966:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=835 comm="apparmor_parser"
[   11.294592] audit: type=1400 audit(1426157430.966:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=835 comm="apparmor_parser"
[   11.294712] audit: type=1400 audit(1426157430.966:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=656 comm="apparmor_parser"
[   11.294721] audit: type=1400 audit(1426157430.966:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=656 comm="apparmor_parser"
[   11.294727] audit: type=1400 audit(1426157430.966:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=656 comm="apparmor_parser"
[   11.294735] audit: type=1400 audit(1426157430.966:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=666 comm="apparmor_parser"
[   11.294742] audit: type=1400 audit(1426157430.966:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=666 comm="apparmor_parser"
[   11.294748] audit: type=1400 audit(1426157430.966:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=666 comm="apparmor_parser"
[   11.480232] usb 1-1.2: new high-speed USB device number 40 using ehci-pci
[   11.828373] init: avahi-cups-reload main process (960) terminated with status 1
[   11.998094] audit: type=1400 audit(1426157431.670:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=908 comm="apparmor_parser"
[   11.999993] usb 1-1.2: new high-speed USB device number 42 using ehci-pci
[   12.037441] Bluetooth: RFCOMM TTY layer initialized
[   12.037452] Bluetooth: RFCOMM socket layer initialized
[   12.037457] Bluetooth: RFCOMM ver 1.11
[   12.114895] init: failsafe main process (867) killed by TERM signal
[   12.151971] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   12.151975] Bluetooth: BNEP filters: protocol multicast
[   12.151982] Bluetooth: BNEP socket layer initialized
[   13.849180] systemd-logind[1215]: New seat seat0.
[   13.849904] systemd-logind[1215]: Watching system buttons on /dev/input/event3 (Power Button)
[   13.849960] systemd-logind[1215]: Watching system buttons on /dev/input/event5 (Video Bus)
[   13.850010] systemd-logind[1215]: Watching system buttons on /dev/input/event0 (Power Button)
[   13.850059] systemd-logind[1215]: Watching system buttons on /dev/input/event2 (Lid Switch)
[   13.850107] systemd-logind[1215]: Watching system buttons on /dev/input/event1 (Sleep Button)
[   13.877932] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin'
[   14.159761] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.34

[heartsmagic]

Bekliyor görünmüyor orada. 14 saniye falan sürmüş gibi?

[mutlucan96]

Dikkat etmemişim. SSHD var da bende sanırım o zaman HDD kısmından yükleme gerçekleşmiş ya da başka bir şey. Aşağıda tekrar paylaştım. Normalde 3-4 saniyede açılırdı.

"random: nonblocking pool is initialized" diye bir şey gelmiş bu önceden yoktu. O aşamada bekliyor da diyemeyiz çünkü açılış sırasında sabit disk ışığı devamlı yanmakta.

Kod Seç Genişlet

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-29-generic (buildd@tipua) (gcc version 4.9.1 (Ubuntu 4.9.1-16ubuntu6) ) #39-Ubuntu SMP Mon Dec 15 22:27:29 UTC 2014 (Ubuntu 3.16.0-29.39-generic 3.16.7-ckt2)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-29-generic root=UUID=5c12f75c-403c-473f-9e61-4adb2a5f2339 ro persistent quiet noplymouth enable_mtrr_cleanup raid=noautodetect
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000997ff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000099800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf63efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf63f000-0x00000000bf6befff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bf6bf000-0x00000000bf7befff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bf7bf000-0x00000000bf7fefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bf7ff000-0x00000000bf7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf800000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bf7fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LG Electronics A520-K.AC5RT/QLH  , BIOS QLHLU262 12/07/2011
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x1bf800 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-protect
[    0.000000]   E8000-EFFFF write-combining
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0BF800000 mask FFF800000 uncachable
[    0.000000]   3 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   4 base 100000000 mask F80000000 write-back
[    0.000000]   5 base 180000000 mask FC0000000 write-back
[    0.000000]   6 base 1BF800000 mask FFF800000 uncachable
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000093000] 93000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01fd2000, 0x01fd2fff] PGTABLE
[    0.000000] BRK [0x01fd3000, 0x01fd3fff] PGTABLE
[    0.000000] BRK [0x01fd4000, 0x01fd4fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x1bf600000-0x1bf7fffff]
[    0.000000]  [mem 0x1bf600000-0x1bf7fffff] page 2M
[    0.000000] BRK [0x01fd5000, 0x01fd5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x1bc000000-0x1bf5fffff]
[    0.000000]  [mem 0x1bc000000-0x1bf5fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x180000000-0x1bbffffff]
[    0.000000]  [mem 0x180000000-0x1bbffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xbf63efff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0xbf5fffff] page 2M
[    0.000000]  [mem 0xbf600000-0xbf63efff] page 4k
[    0.000000] init_memory_mapping: [mem 0xbf7ff000-0xbf7fffff]
[    0.000000]  [mem 0xbf7ff000-0xbf7fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff]
[    0.000000]  [mem 0x100000000-0x17fffffff] page 2M
[    0.000000] BRK [0x01fd6000, 0x01fd6fff] PGTABLE
[    0.000000] BRK [0x01fd7000, 0x01fd7fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x350ec000-0x3686dfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 LGE   )
[    0.000000] ACPI: XSDT 0x00000000BF7FE120 00008C (v01 LGE    LGPC     00000001      01000013)
[    0.000000] ACPI: FACP 0x00000000BF7FC000 0000F4 (v04 LGE    LGPC     00000001 ACPI 00040000)
[    0.000000] ACPI: DSDT 0x00000000BF7E9000 00F4E4 (v01 LGE    LGPC     00000000 ACPI 00040000)
[    0.000000] ACPI: FACS 0x00000000BF76E000 000040
[    0.000000] ACPI: ASF! 0x00000000BF7FD000 0000A5 (v32 LGE    LGPC     00000001 ACPI 00040000)
[    0.000000] ACPI: HPET 0x00000000BF7FB000 000038 (v01 LGE    LGPC     00000001 ACPI 00040000)
[    0.000000] ACPI: APIC 0x00000000BF7FA000 00008C (v02 LGE    LGPC     00000001 ACPI 00040000)
[    0.000000] ACPI: MCFG 0x00000000BF7F9000 00003C (v01 LGE    LGPC     00000001 ACPI 00040000)
[    0.000000] ACPI: SLIC 0x00000000BF7E8000 000176 (v01 LGE    LGPC     00000001 ACPI 00040000)
[    0.000000] ACPI: WDAT 0x00000000BF7E7000 000224 (v01 LGE    LGPC     00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x00000000BF7E6000 0001DE (v01 LGE    LGPC     00001000 ACPI 00040000)
[    0.000000] ACPI: BOOT 0x00000000BF7E4000 000028 (v01 LGE    LGPC     00000001 ACPI 00040000)
[    0.000000] ACPI: ASPT 0x00000000BF7E1000 000034 (v07 LGE    LGPC     00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x00000000BF7E0000 000780 (v01 LGE    LGPC     00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x00000000BF7DF000 000996 (v01 LGE    LGPC     00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x00000000BF7DA000 004BE3 (v01 LGE    LGPC     00001000 ACPI 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000001bf7fffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x1bf7fffff]
[    0.000000]   NODE_DATA [mem 0x1bf7f8000-0x1bf7fcfff]
[    0.000000]  [ffffea0000000000-ffffea0006ffffff] PMD -> [ffff8801b8e00000-ffff8801bedfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x1bf7fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x00098fff]
[    0.000000]   node   0: [mem 0x00100000-0xbf63efff]
[    0.000000]   node   0: [mem 0xbf7ff000-0xbf7fffff]
[    0.000000]   node   0: [mem 0x100000000-0x1bf7fffff]
[    0.000000] On node 0 totalpages: 1568216
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3992 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12185 pages used for memmap
[    0.000000]   DMA32 zone: 779840 pages, LIFO batch:31
[    0.000000]   Normal zone: 12256 pages used for memmap
[    0.000000]   Normal zone: 784384 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x00099000-0x00099fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009a000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf63f000-0xbf6befff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf6bf000-0xbf7befff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf7bf000-0xbf7fefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
[    0.000000] e820: [mem 0xc0000000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff8801bf400000 s83328 r8192 d23168 u262144
[    0.000000] pcpu-alloc: s83328 r8192 d23168 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1543690
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-29-generic root=UUID=5c12f75c-403c-473f-9e61-4adb2a5f2339 ro persistent quiet noplymouth enable_mtrr_cleanup raid=noautodetect
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 6066948K/6272864K available (7740K kernel code, 1200K rwdata, 3608K rodata, 1356K init, 1308K bss, 205916K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[    0.000000] Offload RCU callbacks from all CPUs
[    0.000000] Offload RCU callbacks from CPUs: 0-7.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS:16640 nr_irqs:744 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 25165824 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2294.753 MHz processor
[    0.000037] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.50 BogoMIPS (lpj=9179012)
[    0.000040] pid_max: default: 32768 minimum: 301
[    0.000046] ACPI: Core revision 20140424
[    0.010646] ACPI: All ACPI Tables successfully acquired
[    0.021458] Security Framework initialized
[    0.021476] AppArmor: AppArmor initialized
[    0.021477] Yama: becoming mindful.
[    0.022035] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.023733] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.024488] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.024499] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.024724] Initializing cgroup subsys memory
[    0.024749] Initializing cgroup subsys devices
[    0.024755] Initializing cgroup subsys freezer
[    0.024758] Initializing cgroup subsys net_cls
[    0.024762] Initializing cgroup subsys blkio
[    0.024765] Initializing cgroup subsys perf_event
[    0.024768] Initializing cgroup subsys net_prio
[    0.024774] Initializing cgroup subsys hugetlb
[    0.024796] CPU: Physical Processor ID: 0
[    0.024797] CPU: Processor Core ID: 0
[    0.024802] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.024805] mce: CPU supports 7 MCE banks
[    0.024813] CPU0: Thermal monitoring handled by SMI
[    0.024822] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 6
[    0.024949] Freeing SMP alternatives memory: 32K (ffffffff81e81000 - ffffffff81e89000)
[    0.026355] ftrace: allocating 29305 entries in 115 pages
[    0.041971] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.081637] smpboot: CPU0: Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz (fam: 06, model: 2a, stepping: 07)
[    0.081645] TSC deadline timer enabled
[    0.081671] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[    0.081692] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
[    0.081694] ... version:                3
[    0.081695] ... bit width:              48
[    0.081696] ... generic registers:      4
[    0.081697] ... value mask:             0000ffffffffffff
[    0.081698] ... max period:             0000ffffffffffff
[    0.081699] ... fixed-purpose events:   3
[    0.081700] ... event mask:             000000070000000f
[    0.083523] x86: Booting SMP configuration:
[    0.083526] .... node  #0, CPUs:      #1
[    0.094473] CPU1: Thermal monitoring handled by SMI
[    0.096639] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.096730]  #2
[    0.107774] CPU2: Thermal monitoring handled by SMI
[    0.109952]  #3
[    0.120995] CPU3: Thermal monitoring handled by SMI
[    0.123097] x86: Booted up 1 node, 4 CPUs
[    0.123101] smpboot: Total of 4 processors activated (18358.02 BogoMIPS)
[    0.126517] devtmpfs: initialized
[    0.129111] evm: security.selinux
[    0.129112] evm: security.SMACK64
[    0.129113] evm: security.SMACK64EXEC
[    0.129114] evm: security.SMACK64TRANSMUTE
[    0.129115] evm: security.SMACK64MMAP
[    0.129116] evm: security.ima
[    0.129117] evm: security.capability
[    0.129188] PM: Registering ACPI NVS region [mem 0xbf6bf000-0xbf7befff] (1048576 bytes)
[    0.130110] pinctrl core: initialized pinctrl subsystem
[    0.130184] regulator-dummy: no parameters
[    0.130221] RTC time:  5:15:16, date: 03/13/15
[    0.130272] NET: Registered protocol family 16
[    0.130445] cpuidle: using governor ladder
[    0.130448] cpuidle: using governor menu
[    0.130513] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.130515] ACPI: bus type PCI registered
[    0.130517] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.130599] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.130602] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.130689] PCI: Using configuration type 1 for base access
[    0.130915] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.130916] mtrr: probably your BIOS does not setup all CPUs.
[    0.130917] mtrr: corrected configuration.
[    0.135590] ACPI: Added _OSI(Module Device)
[    0.135592] ACPI: Added _OSI(Processor Device)
[    0.135593] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.135595] ACPI: Added _OSI(Processor Aggregator Device)
[    0.138839] ACPI: Executed 1 blocks of module-level executable AML code
[    0.151168] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.155861] ACPI: Dynamic OEM Table Load:
[    0.155870] ACPI: SSDT 0xFFFF8801B5DD8800 000667 (v01 PmRef  Cpu0Cst  00003001 INTL 20100121)
[    0.159383] ACPI: Dynamic OEM Table Load:
[    0.159390] ACPI: SSDT 0xFFFF8801B62E9400 000303 (v01 PmRef  ApIst    00003000 INTL 20100121)
[    0.163264] ACPI: Dynamic OEM Table Load:
[    0.163270] ACPI: SSDT 0xFFFF8801B5DD4000 000119 (v01 PmRef  ApCst    00003000 INTL 20100121)
[    0.176966] ACPI: Interpreter enabled
[    0.176974] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[    0.176979] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.176994] ACPI: (supports S0 S3 S4 S5)
[    0.176995] ACPI: Using IOAPIC for interrupt routing
[    0.177021] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.184433] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.184439] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.184470] \_SB_.PCI0:_OSC invalid UUID
[    0.184471] _OSC request data:1 1f 0
[    0.184475] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.185072] PCI host bridge to bus 0000:00
[    0.185075] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.185078] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.185079] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.185081] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.185083] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff]
[    0.185091] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.185178] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.185211] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.185247] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.185317] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.185343] pci 0000:00:16.0: reg 0x10: [mem 0xd5304000-0xd530400f 64bit]
[    0.185422] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.185508] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.185786] pci 0000:00:1a.0: reg 0x10: [mem 0xd5309000-0xd53093ff]
[    0.187378] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.187464] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.187483] pci 0000:00:1b.0: reg 0x10: [mem 0xd5300000-0xd5303fff 64bit]
[    0.187559] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.187599] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.187640] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.187726] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.187768] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.187810] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[    0.187894] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.187936] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.187978] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    0.188062] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.188104] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.188151] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.188425] pci 0000:00:1d.0: reg 0x10: [mem 0xd5308000-0xd53083ff]
[    0.190006] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.190071] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.190114] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[    0.190291] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    0.190312] pci 0000:00:1f.2: reg 0x10: [io  0x5048-0x504f]
[    0.190321] pci 0000:00:1f.2: reg 0x14: [io  0x5054-0x5057]
[    0.190330] pci 0000:00:1f.2: reg 0x18: [io  0x5040-0x5047]
[    0.190338] pci 0000:00:1f.2: reg 0x1c: [io  0x5050-0x5053]
[    0.190347] pci 0000:00:1f.2: reg 0x20: [io  0x5020-0x503f]
[    0.190356] pci 0000:00:1f.2: reg 0x24: [mem 0xd5307000-0xd53077ff]
[    0.190404] pci 0000:00:1f.2: PME# supported from D3hot
[    0.190482] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.190500] pci 0000:00:1f.3: reg 0x10: [mem 0xd5305000-0xd53050ff 64bit]
[    0.190521] pci 0000:00:1f.3: reg 0x20: [io  0x5000-0x501f]
[    0.190655] pci 0000:01:00.0: [10de:1050] type 00 class 0x030000
[    0.190666] pci 0000:01:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff]
[    0.190676] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.190686] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.190693] pci 0000:01:00.0: reg 0x24: [io  0x4000-0x407f]
[    0.190700] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[    0.190785] pci 0000:01:00.1: [10de:0e08] type 00 class 0x040300
[    0.190796] pci 0000:01:00.1: reg 0x10: [mem 0xd3000000-0xd3003fff]
[    0.195242] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.195250] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    0.195258] pci 0000:00:01.0:   bridge window [mem 0xd2000000-0xd30fffff]
[    0.195267] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.195398] pci 0000:07:00.0: [1814:3090] type 00 class 0x028000
[    0.195423] pci 0000:07:00.0: reg 0x10: [mem 0xd5200000-0xd520ffff]
[    0.195618] pci 0000:07:00.0: System wakeup disabled by ACPI
[    0.203248] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.203264] pci 0000:00:1c.0:   bridge window [mem 0xd5200000-0xd52fffff]
[    0.203397] pci 0000:08:00.0: [1969:1083] type 00 class 0x020000
[    0.203430] pci 0000:08:00.0: reg 0x10: [mem 0xd5100000-0xd513ffff 64bit]
[    0.203446] pci 0000:08:00.0: reg 0x18: [io  0x3000-0x307f]
[    0.203585] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.203635] pci 0000:08:00.0: System wakeup disabled by ACPI
[    0.211251] pci 0000:00:1c.1: PCI bridge to [bus 08]
[    0.211261] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.211271] pci 0000:00:1c.1:   bridge window [mem 0xd5100000-0xd51fffff]
[    0.211383] pci 0000:00:1c.3: PCI bridge to [bus 09-0e]
[    0.211387] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.211392] pci 0000:00:1c.3:   bridge window [mem 0xd4100000-0xd50fffff]
[    0.211398] pci 0000:00:1c.3:   bridge window [mem 0xd3100000-0xd40fffff 64bit pref]
[    0.211951] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.212001] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.212049] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.212096] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.212143] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.212191] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.212239] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.212286] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.212375] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.212415] ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[    0.212514] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.212516] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.212517] vgaarb: loaded
[    0.212519] vgaarb: bridge control possible 0000:01:00.0
[    0.212757] SCSI subsystem initialized
[    0.212809] libata version 3.00 loaded.
[    0.212836] ACPI: bus type USB registered
[    0.212854] usbcore: registered new interface driver usbfs
[    0.212864] usbcore: registered new interface driver hub
[    0.212887] usbcore: registered new device driver usb
[    0.213023] PCI: Using ACPI for IRQ routing
[    0.214580] PCI: pci_cache_line_size set to 64 bytes
[    0.214626] e820: reserve RAM buffer [mem 0x00099800-0x0009ffff]
[    0.214628] e820: reserve RAM buffer [mem 0xbf63f000-0xbfffffff]
[    0.214630] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
[    0.214631] e820: reserve RAM buffer [mem 0x1bf800000-0x1bfffffff]
[    0.214749] NetLabel: Initializing
[    0.214750] NetLabel:  domain hash size = 128
[    0.214751] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.214764] NetLabel:  unlabeled traffic allowed by default
[    0.214842] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.214847] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.217893] Switched to clocksource hpet
[    0.223580] AppArmor: AppArmor Filesystem Enabled
[    0.223618] pnp: PnP ACPI init
[    0.223634] ACPI: bus type PNP registered
[    0.224539] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.224542] system 00:00: [io  0x1000-0x100f] has been reserved
[    0.224544] system 00:00: [io  0x0810-0x0813] has been reserved
[    0.224546] system 00:00: [io  0xffff] has been reserved
[    0.224548] system 00:00: [io  0x0400-0x0453] could not be reserved
[    0.224550] system 00:00: [io  0x0454-0x0457] has been reserved
[    0.224552] system 00:00: [io  0x0458-0x047f] has been reserved
[    0.224554] system 00:00: [io  0x0500-0x057f] has been reserved
[    0.224556] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.224558] system 00:00: [io  0x0380-0x0387] has been reserved
[    0.224560] system 00:00: [io  0x06a0-0x06a7] has been reserved
[    0.224564] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.224598] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.224633] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.224704] pnp 00:03: Plug and Play ACPI device, IDs SYN1308 SYN1300 SYN0002 PNP0f13 (active)
[    0.224901] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.224904] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.224906] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.224908] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.224910] system 00:04: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.224912] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.224914] system 00:04: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.224916] system 00:04: [mem 0xff000000-0xffffffff] could not be reserved
[    0.224918] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.224920] system 00:04: [mem 0xd5400000-0xd5400fff] has been reserved
[    0.224922] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.225149] system 00:05: [mem 0x20000000-0x201fffff] could not be reserved
[    0.225151] system 00:05: [mem 0x40000000-0x401fffff] could not be reserved
[    0.225154] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.225168] pnp: PnP ACPI: found 6 devices
[    0.225170] ACPI: bus type PNP unregistered
[    0.231727] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[    0.231762] pci 0000:01:00.0: BAR 6: assigned [mem 0xd3080000-0xd30fffff pref]
[    0.231765] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.231767] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    0.231770] pci 0000:00:01.0:   bridge window [mem 0xd2000000-0xd30fffff]
[    0.231773] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.231777] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.231782] pci 0000:00:1c.0:   bridge window [mem 0xd5200000-0xd52fffff]
[    0.231791] pci 0000:00:1c.1: PCI bridge to [bus 08]
[    0.231795] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.231800] pci 0000:00:1c.1:   bridge window [mem 0xd5100000-0xd51fffff]
[    0.231809] pci 0000:00:1c.3: PCI bridge to [bus 09-0e]
[    0.231812] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.231818] pci 0000:00:1c.3:   bridge window [mem 0xd4100000-0xd50fffff]
[    0.231822] pci 0000:00:1c.3:   bridge window [mem 0xd3100000-0xd40fffff 64bit pref]
[    0.231829] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.231831] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.231833] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.231835] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfeafffff]
[    0.231837] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    0.231839] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd30fffff]
[    0.231841] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.231843] pci_bus 0000:07: resource 1 [mem 0xd5200000-0xd52fffff]
[    0.231845] pci_bus 0000:08: resource 0 [io  0x3000-0x3fff]
[    0.231846] pci_bus 0000:08: resource 1 [mem 0xd5100000-0xd51fffff]
[    0.231848] pci_bus 0000:09: resource 0 [io  0x2000-0x2fff]
[    0.231850] pci_bus 0000:09: resource 1 [mem 0xd4100000-0xd50fffff]
[    0.231852] pci_bus 0000:09: resource 2 [mem 0xd3100000-0xd40fffff 64bit pref]
[    0.231883] NET: Registered protocol family 2
[    0.232082] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.232247] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.232376] TCP: Hash tables configured (established 65536 bind 65536)
[    0.232398] TCP: reno registered
[    0.232409] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.232440] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.232513] NET: Registered protocol family 1
[    0.262046] pci 0000:01:00.0: Video device with shadowed ROM
[    0.262063] PCI: CLS 64 bytes, default 64
[    0.262123] Trying to unpack rootfs image as initramfs...
[    0.658971] Freeing initrd memory: 24072K (ffff8800350ec000 - ffff88003686e000)
[    0.659027] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.659031] software IO TLB [mem 0xbb63f000-0xbf63f000] (64MB) mapped at [ffff8800bb63f000-ffff8800bf63efff]
[    0.659094] Simple Boot Flag at 0x44 set to 0x1
[    0.659279] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    0.659320] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x23
[    0.659327] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x23
[    0.659332] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x23
[    0.659339] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x23
[    0.659400] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.659425] Scanning for low memory corruption every 60 seconds
[    0.659768] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.659794] Initialise system trusted keyring
[    0.659819] audit: initializing netlink subsys (disabled)
[    0.659836] audit: type=2000 audit(1426223716.648:1): initialized
[    0.660187] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.661736] zpool: loaded
[    0.661740] zbud: loaded
[    0.661918] VFS: Disk quotas dquot_6.5.2
[    0.661956] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.662432] fuse init (API version 7.23)
[    0.662523] msgmni has been set to 11896
[    0.662585] Key type big_key registered
[    0.662998] Key type asymmetric registered
[    0.663002] Asymmetric key parser 'x509' registered
[    0.663038] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.663081] io scheduler noop registered
[    0.663084] io scheduler deadline registered (default)
[    0.663132] io scheduler cfq registered
[    0.663314] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.663689] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.663705] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.663753] vesafb: mode is 1366x768x32, linelength=5472, pages=0
[    0.663754] vesafb: scrolling: redraw
[    0.663756] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.663770] vesafb: framebuffer at 0xd1000000, mapped to 0xffffc90004f00000, using 4160k, total 4160k
[    0.720264] Console: switching to colour frame buffer device 170x48
[    0.776569] fb0: VESA VGA frame buffer device
[    0.776607] intel_idle: MWAIT substates: 0x21120
[    0.776609] intel_idle: v0.4 model 0x2A
[    0.776610] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.777587] ACPI: AC Adapter [ACAD] (on-line)
[    0.777705] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.777709] ACPI: Power Button [PWRB]
[    0.777748] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.777750] ACPI: Sleep Button [SLPB]
[    0.777788] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    0.778555] ACPI: Lid Switch [LID0]
[    0.778609] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.778612] ACPI: Power Button [PWRF]
[    0.783269] thermal LNXTHERM:00: registered as thermal_zone0
[    0.783272] ACPI: Thermal Zone [TZ01] (62 C)
[    0.783313] GHES: HEST is not enabled!
[    0.783418] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.785226] Linux agpgart interface v0.103
[    0.787042] brd: module loaded
[    0.787782] loop: module loaded
[    0.788012] libphy: Fixed MDIO Bus: probed
[    0.788017] tun: Universal TUN/TAP device driver, 1.6
[    0.788018] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.788064] PPP generic driver version 2.4.2
[    0.788109] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.788115] ehci-pci: EHCI PCI platform driver
[    0.788235] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.788243] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.788257] ehci-pci 0000:00:1a.0: debug port 2
[    0.792158] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.792176] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd5309000
[    0.796163] ACPI: Battery Slot [BAT0] (battery present)
[    0.801615] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.801659] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.801661] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.801663] usb usb1: Product: EHCI Host Controller
[    0.801665] usb usb1: Manufacturer: Linux 3.16.0-29-generic ehci_hcd
[    0.801667] usb usb1: SerialNumber: 0000:00:1a.0
[    0.801823] hub 1-0:1.0: USB hub found
[    0.801830] hub 1-0:1.0: 2 ports detected
[    0.802010] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.802015] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.802027] ehci-pci 0000:00:1d.0: debug port 2
[    0.805910] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.805923] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd5308000
[    0.817605] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.817642] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.817644] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.817646] usb usb2: Product: EHCI Host Controller
[    0.817648] usb usb2: Manufacturer: Linux 3.16.0-29-generic ehci_hcd
[    0.817650] usb usb2: SerialNumber: 0000:00:1d.0
[    0.817789] hub 2-0:1.0: USB hub found
[    0.817795] hub 2-0:1.0: 2 ports detected
[    0.817892] ehci-platform: EHCI generic platform driver
[    0.817903] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.817908] ohci-pci: OHCI PCI platform driver
[    0.817920] ohci-platform: OHCI generic platform driver
[    0.817929] uhci_hcd: USB Universal Host Controller Interface driver
[    0.817996] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.821671] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.821676] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.821871] mousedev: PS/2 mouse device common for all mice
[    0.822252] rtc_cmos 00:01: RTC can wake from S4
[    0.822383] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.822412] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.822478] device-mapper: uevent: version 1.0.3
[    0.822552] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    0.822565] Intel P-state driver initializing.
[    0.822581] Intel pstate controlling: cpu 0
[    0.822600] Intel pstate controlling: cpu 1
[    0.822620] Intel pstate controlling: cpu 2
[    0.822646] Intel pstate controlling: cpu 3
[    0.822665] Consider also installing thermald for improved thermal control.
[    0.822670] ledtrig-cpu: registered to indicate activity on CPUs
[    0.822759] TCP: cubic registered
[    0.822856] NET: Registered protocol family 10
[    0.823060] NET: Registered protocol family 17
[    0.823073] Key type dns_resolver registered
[    0.823344] Loading compiled-in X.509 certificates
[    0.824195] Loaded X.509 cert 'Magrathea: Glacier signing key: 70637fde89462678aff2d9c2bb1290be2fed1fb1'
[    0.824209] registered taskstats version 1
[    0.825860] Key type trusted registered
[    0.827288] Key type encrypted registered
[    0.828680] AppArmor: AppArmor sha1 policy hashing enabled
[    0.828685] ima: No TPM chip found, activating TPM-bypass!
[    0.828699] evm: HMAC attrs: 0x1
[    0.829084]   Magic number: 7:205:264
[    0.829087]   hash matches /build/buildd/linux-3.16.0/drivers/base/power/main.c:736
[    0.829174] rtc_cmos 00:01: setting system clock to 2015-03-13 05:15:16 UTC (1426223716)
[    0.829234] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.829235] EDD information not available.
[    0.829298] PM: Hibernation image not present or could not be loaded.
[    0.830479] Freeing unused kernel memory: 1356K (ffffffff81d2e000 - ffffffff81e81000)
[    0.830481] Write protecting the kernel read-only data: 12288k
[    0.831483] Freeing unused kernel memory: 440K (ffff880001792000 - ffff880001800000)
[    0.832405] Freeing unused kernel memory: 488K (ffff880001b86000 - ffff880001c00000)
[    0.842858] systemd-udevd[125]: starting version 208
[    0.843278] random: systemd-udevd urandom read with 3 bits of entropy available
[    0.885441] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    0.892383] ACPI: Video Device [VGA] (multi-head: yes  rom: yes  post: no)
[    0.907986] ahci 0000:00:1f.2: version 3.0
[    1.014172] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[    1.014217] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[    1.014220] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[    1.022231] scsi0 : ahci
[    1.022365] scsi1 : ahci
[    1.022477] scsi2 : ahci
[    1.022579] scsi3 : ahci
[    1.022678] scsi4 : ahci
[    1.022770] scsi5 : ahci
[    1.022826] ata1: SATA max UDMA/133 abar m2048@0xd5307000 port 0xd5307100 irq 41
[    1.022831] ata2: SATA max UDMA/133 abar m2048@0xd5307000 port 0xd5307180 irq 41
[    1.022832] ata3: DUMMY
[    1.022836] ata4: DUMMY
[    1.022837] ata5: DUMMY
[    1.022838] ata6: DUMMY
[    1.046823] atl1c 0000:08:00.0: version 1.0.1.1-NAPI
[    1.113476] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.133148] acpi device:36: registered as cooling_device4
[    1.133205] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2c/LNXVIDEO:01/input/input7
[    1.245898] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.245909] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.246150] hub 1-1:1.0: USB hub found
[    1.246236] hub 1-1:1.0: 6 ports detected
[    1.341455] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.341502] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.344177] ata2.00: ATAPI: HL-DT-STDVDRAM GT40N, SL03, max UDMA/100
[    1.347106] ata2.00: configured for UDMA/100
[    1.357440] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.414348] ata1.00: ATA-9: ST1000LM014-1EJ164, SM11, max UDMA/133
[    1.414358] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.458696] ata1.00: configured for UDMA/133
[    1.458993] scsi 0:0:0:0: Direct-Access     ATA      ST1000LM014-1EJ1 SM11 PQ: 0 ANSI: 5
[    1.459379] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.459382] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.459409] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.459423] sd 0:0:0:0: [sda] Write Protect is off
[    1.459426] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.459445] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.459893]  sda: sda1 sda2 sda3 sda4
[    1.460276] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.462296] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GT40N     SL03 PQ: 0 ANSI: 5
[    1.480564] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.480568] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.480774] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.480887] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.489622] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.489626] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.489910] hub 2-1:1.0: USB hub found
[    1.489981] hub 2-1:1.0: 6 ports detected
[    1.561341] usb 1-1.2: new high-speed USB device number 3 using ehci-pci
[    1.657256] tsc: Refined TSC clocksource calibration: 2294.789 MHz
[    1.701719] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04773/0xa40000/0xa0000, board id: 3655, fw id: 590211
[    1.740994] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[    1.753202] usb 1-1.2: New USB device found, idVendor=064e, idProduct=a118
[    1.753206] usb 1-1.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    1.753210] usb 1-1.2: Product: LG Webcam
[    1.753212] usb 1-1.2: Manufacturer: SuYin
[    1.753213] usb 1-1.2: SerialNumber: CN1316-T803-HN02S-VL-R01.02.04
[    1.825347] usb 1-1.3: new full-speed USB device number 4 using ehci-pci
[    2.114827] usb 1-1.3: New USB device found, idVendor=13d3, idProduct=3314
[    2.114839] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.185209] usb 1-1.4: new full-speed USB device number 5 using ehci-pci
[    2.279418] usb 1-1.4: New USB device found, idVendor=08ff, idProduct=1686
[    2.279429] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.279435] usb 1-1.4: Product: Fingerprint Sensor
[    2.349123] usb 2-1.3: new full-speed USB device number 3 using ehci-pci
[    2.444567] usb 2-1.3: New USB device found, idVendor=046d, idProduct=c52f
[    2.444579] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.444584] usb 2-1.3: Product: USB Receiver
[    2.444589] usb 2-1.3: Manufacturer: Logitech
[    2.448531] hidraw: raw HID events driver (C) Jiri Kosina
[    2.452834] usbcore: registered new interface driver usbhid
[    2.452837] usbhid: USB HID core driver
[    2.454214] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:046D:C52F.0001/input/input8
[    2.454326] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.3/input0
[    2.455038] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/0003:046D:C52F.0002/input/input9
[    2.455167] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.3/input1
[    2.656709] Switched to clocksource tsc
[    2.723738] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    3.090976] init: plymouth-upstart-bridge main process (238) killed by TERM signal
[    5.528269] random: nonblocking pool is initialized
[   12.203203] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   12.265050] systemd-udevd[403]: starting version 208
[   12.306023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[   12.307897] lp: driver loaded but no devices found
[   12.317731] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   12.322874] ppdev: user-space parallel port driver
[   12.327388] [drm] Initialized drm 1.1.0 20060810
[   12.338846] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
[   12.352790] wmi: Mapper loaded
[   12.386582] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140424/utaddress-258)
[   12.386591] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.386596] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
[   12.386600] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.GPIO) (20140424/utaddress-258)
[   12.386605] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20140424/utaddress-258)
[   12.386609] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.386611] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
[   12.386615] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.GPIO) (20140424/utaddress-258)
[   12.386618] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20140424/utaddress-258)
[   12.386622] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.386625] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
[   12.386628] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.GPIO) (20140424/utaddress-258)
[   12.386632] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20140424/utaddress-258)
[   12.386637] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.386638] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   12.411013] cfg80211: Calling CRDA to update world regulatory domain
[   12.455621] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[   12.455781] snd_hda_intel 0000:01:00.1: Disabling MSI
[   12.455789] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[   12.457793] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3090, rev 3213 detected
[   12.463045] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected
[   12.469764] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   12.473151] AVX version of gcm_enc/dec engaged.
[   12.474538] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   12.474541] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   12.474543] sound hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   12.474544] sound hdaudioC0D0:    mono: mono_out=0x0
[   12.474545] sound hdaudioC0D0:    inputs:
[   12.474548] sound hdaudioC0D0:      Mic=0x18
[   12.474549] sound hdaudioC0D0:      Internal Mic=0x12
[   12.480991] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   12.481152] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   12.512712] device-mapper: multipath: version 1.7.0 loaded
[   12.525380] intel_rapl: Found RAPL domain package
[   12.525384] intel_rapl: Found RAPL domain core
[   12.631127] Bluetooth: Core ver 2.19
[   12.631148] NET: Registered protocol family 31
[   12.631150] Bluetooth: HCI device and connection manager initialized
[   12.631158] Bluetooth: HCI socket layer initialized
[   12.631161] Bluetooth: L2CAP socket layer initialized
[   12.631170] Bluetooth: SCO socket layer initialized
[   12.638038] usbcore: registered new interface driver btusb
[   12.641424] media: Linux media interface: v0.10
[   12.646859] Linux video capture interface: v2.00
[   12.656355] uvcvideo: Found UVC 1.00 device LG Webcam (064e:a118)
[   12.663064] input: LG Webcam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input12
[   12.663149] usbcore: registered new interface driver uvcvideo
[   12.663151] USB Video Class driver (1.1.1)
[   12.677970] nvidia: module license 'NVIDIA' taints kernel.
[   12.677980] Disabling lock debugging due to kernel taint
[   12.679416] cfg80211: World regulatory domain updated:
[   12.679420] cfg80211:  DFS Master region: unset
[   12.679422] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   12.679424] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   12.679426] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   12.679428] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[   12.679429] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   12.679430] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   12.681572] nvidia: module verification failed: signature and/or  required key missing - tainting kernel
[   12.685652] audit: type=1400 audit(1426216528.356:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=728 comm="apparmor_parser"
[   12.685662] audit: type=1400 audit(1426216528.356:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=728 comm="apparmor_parser"
[   12.685668] audit: type=1400 audit(1426216528.356:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=728 comm="apparmor_parser"
[   12.686183] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[   12.686769] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
[   12.686778] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  331.113  Mon Dec  1 21:08:13 PST 2014
[   12.686820] audit: type=1400 audit(1426216528.356:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=619 comm="apparmor_parser"
[   12.686831] audit: type=1400 audit(1426216528.356:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=619 comm="apparmor_parser"
[   12.686837] audit: type=1400 audit(1426216528.356:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=619 comm="apparmor_parser"
[   12.687654] audit: type=1400 audit(1426216528.360:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=620 comm="apparmor_parser"
[   12.687665] audit: type=1400 audit(1426216528.360:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=620 comm="apparmor_parser"
[   12.687671] audit: type=1400 audit(1426216528.360:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=620 comm="apparmor_parser"
[   12.795748] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[   15.940269] init: Error while reading from descriptor: Broken pipe
[   15.942062] init: failsafe main process (920) killed by TERM signal
[   16.083590] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   16.083594] Bluetooth: BNEP filters: protocol multicast
[   16.083602] Bluetooth: BNEP socket layer initialized
[   16.099507] Bluetooth: RFCOMM TTY layer initialized
[   16.099518] Bluetooth: RFCOMM socket layer initialized
[   16.099524] Bluetooth: RFCOMM ver 1.11
[   16.179767] audit: type=1400 audit(1426216531.852:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1126 comm="apparmor_parser"
[   16.359465] systemd-logind[1168]: New seat seat0.
[   16.360156] systemd-logind[1168]: Watching system buttons on /dev/input/event3 (Power Button)
[   16.360209] systemd-logind[1168]: Watching system buttons on /dev/input/event5 (Video Bus)
[   16.360256] systemd-logind[1168]: Watching system buttons on /dev/input/event0 (Power Button)
[   16.360300] systemd-logind[1168]: Watching system buttons on /dev/input/event2 (Lid Switch)
[   16.360344] systemd-logind[1168]: Watching system buttons on /dev/input/event1 (Sleep Button)
[   16.387532] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin'
[   16.389288] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.34

[heartsmagic]

Yeni kurulum mu yaptın? Disk yapın nasıl, neyi nereye kurdun yani?
Bahsi geçen sorun için: https://forum.ubuntu-tr.net/index.php?topic=44417.0

[mutlucan96]

Verdiğiniz bağlantıdaki değişiklikleri yaptım. Düzelme olmadığı gibi onunla ilgili hata mesajı gösterildi. "grub" ayarını önceki haline getirdim.

Kurulum 5 aylık falan olması lazım. Sonrada ortaya çıktı sorun 3-4 saniyede açılıyordu.
sda1 olarak kök dosya sistemi.
sda2 olarak /home ayarlı.
sda3 ve sda4 olarak işletim sistemi bulunmayan ek depolama alanlarım var.

[heartsmagic]

Hata mesajı gösterildi derken? Disk yapısı derken, sen HDD kısmından yüklendi falan demişsin ya, hani ilk kurduğunda durum böyle değil miydi?

[mutlucan96]

SSHD'de SSD ve HDD kısmının kullanımını biz belirlemiyoruz. Sistem tek bir sabit disk görüyor HDD boyutu kadar. En çok kullanılan veriler otomatik olarak SSD kısmına aktarılıp oradan yükleniyor. Bilgisayarı fazla kullanmışsam boot verileri SSD'den siliniyor. Demek istediğim buydu.

Hata tpm ile ilgili bir şeydi. tpm error -5 falan. Önemliyse tekrar deneyeyim.

[heartsmagic]

Hata veriyor ve açılmıyor mu sistem? En azından buraya geçersin hatayı ona göre bakarız.

[mutlucan96]

Kod Seç Genişlet

[    0.844963] tpm_tis tpm_tis: 1.2 TPM (device-id 0xFFFF, rev-id 255)
[    0.845010] tpm_tis tpm_tis: tpm_transmit: tpm_send: error -5
[    0.845489] tpm_tis tpm_tis: A TPM error (-5) occurred attempting to determine the timeouts
[    0.846206] tpm_tis tpm_tis: tpm_transmit: tpm_send: error -5
[    0.846681] tpm_tis tpm_tis: Could not get TPM timeouts and durations

Sistem açılıyor.

[if]

https://forum.ubuntu-tr.net/index.php?topic=44417.msg517146#msg517146

[mutlucan96]

https://forum.ubuntu-tr.net/index.php?topic=44417.msg517146#msg517146

@hearthsmagic ile aynı bağlantıyı paylaştınız. Bahsedilen çözümü uyguladigim zaman sorun düzelmediği gibi hata veriyor.

[if]

tpm_tis.interrupts=0 olarak deneyin bir de.

[mutlucan96]

 random: nonblocking pool is initialized

Hala devam ediyor.

[heartsmagic]

Başka da öneri göremiyorum açıkçası. Çekirdek sürümünü yükseltmeyi deneyebiliriz belki.

[mutlucan96]

Çekirdek yükselttim, grub'u sıfırladım ve systemd'ye geçtim.
4 saniyede oturum açma ekranına ulaşıyorum şuan.