Lenovo z50-70 Wi-Fi Sorunu

[Pozitron]

Merhaba arkadaşlar,
Daha öncede bu sorunumdan bahsetmiştim;fakat hala bir çözüm bulabilmiş değilim yabancı bir sitede çekirdeğini güncelle diyordu ve öyle yaptım.Bir süreliğine baya iyi gitti bağlanabiliyordum Wi-fiya;fakat sonra yine gitti,oldu sanmıştım ama yine olmadı.

Dışarda Ubuntu kullanamıyorum sırf internet gittiği için.Ne yapmalıyım?

Başka bir konu daha var aslında bu konuyla alakasız ama yeni konu açıp forumu kirletmek istemiyorum:
UEFI olmadan açarsam Legacy supportla,grubdaki windows /boot/bcd hatası veriyor;ancak UEFI ile windowsa bağlanabiliyorum.Ama sürekli kapatıp  açmak durumunda kalıyorum bu da laptopum için sağlıksız bir durum ayrıca sinirlerim için de.

[heartsmagic]

@Pozitron, eğer birebir aynı donanım yoksa başka başlıklarda sorunu dile getirmek ortalığı karıştırıyor biraz. Bu nedenle kendi başlıklarından devam etmelisin bence. Ağ sorunu için şu çıktıları geç lütfen: agkomut

UEFI sorunu içinse yeni bir başlık aç lütfen, forum kirlenmez aksine bunu teşvik ediyoruz bizler.

[Pozitron]

O zaman onnun için yeni bir başlık açiyim

Çıktılat şu şekilde:

Kod Seç Genişlet

cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=14.04
DISTRIB_CODENAME=trusty
DISTRIB_DESCRIPTION="Ubuntu 14.04.2 LTS"


Kod Seç Genişlet

Linux pozitron-Lenovo-Z50-70 3.16.0-031600-generic #201408031935 SMP Sun Aug 3 23:56:17 UTC 2014 i686 i686 i686 GNU/Linux


Kod Seç Genişlet

lspci
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b)
00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 0b)
00:14.0 USB controller: Intel Corporation Lynx Point-LP USB xHCI HC (rev 04)
00:16.0 Communication controller: Intel Corporation Lynx Point-LP HECI #0 (rev 04)
00:1b.0 Audio device: Intel Corporation Lynx Point-LP HD Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation Lynx Point-LP PCI Express Root Port 3 (rev e4)
00:1c.3 PCI bridge: Intel Corporation Lynx Point-LP PCI Express Root Port 4 (rev e4)
00:1c.4 PCI bridge: Intel Corporation Lynx Point-LP PCI Express Root Port 5 (rev e4)
00:1d.0 USB controller: Intel Corporation Lynx Point-LP USB EHCI #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation Lynx Point-LP LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation Lynx Point-LP SATA Controller 1 [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation Lynx Point-LP SMBus Controller (rev 04)
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 10)
02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter
03:00.0 3D controller: NVIDIA Corporation GM108M [GeForce 840M] (rev a2)


Kod Seç Genişlet

lsusb
Bus 001 Device 002: ID 8087:8000 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 005: ID 0bda:b728 Realtek Semiconductor Corp.
Bus 002 Device 004: ID 5986:055e Acer, Inc
Bus 002 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 002 Device 002: ID 046d:c52f Logitech, Inc. Unifying Receiver
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


Kod Seç Genişlet

rfkill list
0: ideapad_wlan: Wireless LAN
Soft blocked: no
Hard blocked: no
1: ideapad_bluetooth: Bluetooth
Soft blocked: yes
Hard blocked: no
3: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
5: hci0: Bluetooth
Soft blocked: yes
Hard blocked: no


Kod Seç Genişlet

  *-network               
       açıklama: Eternet interface
       ürün: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
       üretici: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:01:00.0
       mantıksal ad: eth0
       sürüm: 10
       serial: 28:d2:44:a1:b3:22
       boyut: 10Mbit/s
       kapasite: 1Gbit/s
       genişlik: 64 bits
       saat: 33MHz
       kapasiteler: pm msi pciexpress msix vpd bus_master cap_list eternet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
       yapılandırma: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl8168g-3_0.0.1 04/23/13 latency=0 link=no multicast=yes port=MII speed=10Mbit/s
       kaynaklar: irq:61 ioport:5000(boyut=256) bellek:c3504000-c3504fff bellek:c3500000-c3503fff
  *-network
       açıklama: Kablosuz arayüz
       ürün: RTL8723BE PCIe Wireless Network Adapter
       üretici: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:02:00.0
       mantıksal ad: wlan0
       sürüm: 00
       serial: 90:48:9a:57:8a:a1
       genişlik: 64 bits
       saat: 33MHz
       kapasiteler: pm msi pciexpress bus_master cap_list eternet physical wireless
       yapılandırma: broadcast=yes driver=rtl8723be driverversion=3.16.0-031600-generic firmware=N/A ip=192.168.140.235 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn
       kaynaklar: irq:19 ioport:4000(boyut=256) bellek:c3400000-c3403fff


Kod Seç Genişlet

ifconfig
eth0      Link encap:Ethernet  HWaddr 28:d2:44:a1:b3:22 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Sunucu
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:1921 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1921 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:309195 (309.1 KB)  TX bytes:309195 (309.1 KB)

wlan0     Link encap:Ethernet  HWaddr 90:48:9a:57:8a:a1 
          inet addr:192.168.140.235  Bcast:192.168.191.255  Mask:255.255.192.0
          inet6 addr: fe80::9248:9aff:fe57:8aa1/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:82417 errors:0 dropped:37 overruns:0 frame:0
          TX packets:3189 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:12391000 (12.3 MB)  TX bytes:582602 (582.6 KB)


Kod Seç Genişlet

ifconfig
eth0      Link encap:Ethernet  HWaddr 28:d2:44:a1:b3:22 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Sunucu
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:1921 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1921 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:309195 (309.1 KB)  TX bytes:309195 (309.1 KB)

wlan0     Link encap:Ethernet  HWaddr 90:48:9a:57:8a:a1 
          inet addr:192.168.140.235  Bcast:192.168.191.255  Mask:255.255.192.0
          inet6 addr: fe80::9248:9aff:fe57:8aa1/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:82417 errors:0 dropped:37 overruns:0 frame:0
          TX packets:3189 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:12391000 (12.3 MB)  TX bytes:582602 (582.6 KB)

pozitron@pozitron-Lenovo-Z50-70:~$ iwconfig
wlan0     IEEE 802.11bgn  ESSID:"Ekonet-Student" 
          Mode:Managed  Frequency:2.462 GHz  Access Point: 2C:41:38:FB:6D:B2   
          Bit Rate=72.2 Mb/s   Tx-Power=20 dBm   
          Retry short limit:7   RTS thr=2347 B   Fragment thr:off
          Power Management:off
          Link Quality=70/70  Signal level=-37 dBm 
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:57   Missed beacon:0

lo        no wireless extensions.

eth0      no wireless extensions.


Kod Seç Genişlet

iwlist scanning
wlan0     Scan completed :
          Cell 01 - Address: 2C:41:38:FB:6D:B2
                    Channel:11
                    Frequency:2.462 GHz (Channel 11)
                    Quality=70/70  Signal level=-36 dBm 
                    Encryption key:off
                    ESSID:"Ekonet-Student"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
                              9 Mb/s; 12 Mb/s; 18 Mb/s
                    Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
                    Mode:Master
                    Extra:tsf=4b0000eac52143b3
                    Extra: Last beacon: 52176ms ago
                    IE: Unknown: 000E456B6F6E65742D53747564656E74
                    IE: Unknown: 010882848B960C121824
                    IE: Unknown: 03010B
                    IE: Unknown: 23021300
                    IE: Unknown: 2A0102
                    IE: Unknown: 32043048606C
                    IE: Unknown: 470104
                    IE: Unknown: 2D1AAC0103FFFFFF0000000000000000000000000000000000000000
                    IE: Unknown: 3D160B001700000000000000000000000000000000000000
                    IE: Unknown: 4A0E14000A002C01C800140005001900
                    IE: Unknown: 7F0101
                    IE: Unknown: DD180050F2020101850003A4000027A4000042435E0062322F00

lo        Interface doesn't support scanning.

eth0      Interface doesn't support scanning.


Kod Seç Genişlet

lsmod
Module                  Size  Used by
bnep                   19107  2
rfcomm                 59328  8
snd_hda_codec_conexant    14349  1
snd_hda_codec_generic    63743  1 snd_hda_codec_conexant
snd_hda_codec_hdmi     46944  1
arc4                   12509  2
uvcvideo               76608  0
videobuf2_vmalloc      13048  1 uvcvideo
videobuf2_memops       13170  1 videobuf2_vmalloc
intel_rapl             18652  0
videobuf2_core         52883  1 uvcvideo
rtl8723be              77582  0
x86_pkg_temp_thermal    13936  0
intel_powerclamp       18561  0
btcoexist              54790  1 rtl8723be
rtl8723_common         22475  1 rtl8723be
coretemp               13358  0
rtl_pci                26805  1 rtl8723be
v4l2_common            15158  1 videobuf2_core
rtlwifi                58261  2 rtl_pci,rtl8723be
mac80211              584028  3 rtl_pci,rtlwifi,rtl8723be
kvm                   400845  0
snd_soc_rt5640         66539  0
videodev              131816  3 uvcvideo,v4l2_common,videobuf2_core
media                  21030  2 uvcvideo,videodev
crc32_pclmul           13026  0
aesni_intel            18210  1
aes_i586               16995  1 aesni_intel
snd_hda_intel          29459  5
xts                    12778  1 aesni_intel
btusb                  27741  0
lrw                    13127  1 aesni_intel
snd_hda_controller     30246  1 snd_hda_intel
snd_soc_rl6231         12909  1 snd_soc_rt5640
gf128mul               14503  2 lrw,xts
nouveau              1090169  0
cfg80211              436806  2 mac80211,rtlwifi
i915                  837697  7
snd_soc_core          168709  1 snd_soc_rt5640
snd_hda_codec         121208  5 snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
bluetooth             410636  22 bnep,btusb,rfcomm
snd_compress           18867  1 snd_soc_core
ablk_helper            13357  1 aesni_intel
mxm_wmi                12893  1 nouveau
joydev                 17311  0
snd_hwdep              13276  1 snd_hda_codec
snd_pcm_dmaengine      14845  1 snd_soc_core
serio_raw              13251  0
snd_pcm                88093  7 snd_soc_rt5640,snd_soc_core,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller,snd_pcm_dmaengine
ttm                    77856  1 nouveau
ppdev                  17423  0
cryptd                 19822  1 ablk_helper
lpc_ich                17000  0
snd_seq_midi           13324  0
drm_kms_helper         55395  2 i915,nouveau
snd_seq_midi_event     14475  1 snd_seq_midi
6lowpan_iphc           18480  1 bluetooth
lp                     13359  0
mei_me                 18957  0
snd_rawmidi            25786  1 snd_seq_midi
parport_pc             32154  0
drm                   257031  8 ttm,i915,drm_kms_helper,nouveau
snd_seq                56978  2 snd_seq_midi_event,snd_seq_midi
parport                40945  3 lp,ppdev,parport_pc
snd_seq_device         14137  3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer              29036  2 snd_pcm,snd_seq
mei                    72686  1 mei_me
snd                    67102  23 snd_soc_core,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_compress
soc_button_array       12681  0
i2c_hid                18553  0
i2c_algo_bit           13316  2 i915,nouveau
shpchp                 32280  0
i2c_designware_platform    12881  0
soundcore              14635  2 snd,snd_hda_codec
snd_soc_sst_acpi       12871  0
i2c_designware_core    14502  1 i2c_designware_platform
spi_pxa2xx_platform    22753  0
dw_dmac                12723  0
dw_dmac_core           23667  1 dw_dmac
ideapad_laptop         18131  0
mac_hid                13099  0
8250_dw                13277  0
video                  19865  2 i915,nouveau
sparse_keymap          13658  1 ideapad_laptop
wmi                    18843  2 mxm_wmi,nouveau
hid_generic            12503  0
usbhid                 47453  0
hid                    91996  4 i2c_hid,hid_generic,usbhid
psmouse                97427  0
ahci                   29887  2
r8169                  62873  0
libahci                31151  1 ahci
mii                    13693  1 r8169
sdhci_acpi             13195  0
sdhci                  38680  1 sdhci_acpi


Kod Seç Genişlet

[   73.857340] pci 0000:03:00.0: Max Payload Size 16384, but upstream 0000:00:1c.4 set to 128; if necessary, use "pci=pcie_bus_safe" and report a bug
[   73.857343] pci 0000:03:00.0: no hotplug settings from platform
[   73.857345] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[   73.857346] ehci-pci 0000:00:1d.0: using default PCI settings
[   73.857352] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[   73.857353] lpc_ich 0000:00:1f.0: using default PCI settings
[   73.857361] ahci 0000:00:1f.2: no hotplug settings from platform
[   73.857362] ahci 0000:00:1f.2: using default PCI settings
[   73.857367] pci 0000:00:1f.3: no hotplug settings from platform
[   73.857368] pci 0000:00:1f.3: using default PCI settings
[   73.857508] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   73.862243] done.
[   77.827976] r8169 0000:01:00.0 eth0: link down
[   77.828102] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   78.305463] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   79.187589] wlan0: authenticate with 2c:41:38:fb:6d:b2
[   79.197729] wlan0: send auth to 2c:41:38:fb:6d:b2 (try 1/3)
[   79.201878] wlan0: authenticated
[   79.202739] wlan0: associate with 2c:41:38:fb:6d:b2 (try 1/3)
[   79.211689] wlan0: RX AssocResp from 2c:41:38:fb:6d:b2 (capab=0x421 status=0 aid=21)
[   79.211807] wlan0: associated
[   79.211813] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   95.705980] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[   95.705991] i915 0000:00:02.0: no hotplug settings from platform
[   95.705994] i915 0000:00:02.0: using default PCI settings
[   95.706000] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[   95.706004] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[   95.706006] xhci_hcd 0000:00:14.0: using default PCI settings
[   95.706013] mei_me 0000:00:16.0: no hotplug settings from platform
[   95.706014] mei_me 0000:00:16.0: using default PCI settings
[   95.706021] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[   95.706025] pcieport 0000:00:1c.0: no hotplug settings from platform
[   95.706033] r8169 0000:01:00.0: no hotplug settings from platform
[   95.706036] pcieport 0000:00:1c.3: no hotplug settings from platform
[   95.706044] rtl8723be 0000:02:00.0: no hotplug settings from platform
[   95.706048] pcieport 0000:00:1c.4: no hotplug settings from platform
[   95.706052] pci 0000:03:00.0: Max Payload Size 16384, but upstream 0000:00:1c.4 set to 128; if necessary, use "pci=pcie_bus_safe" and report a bug
[   95.706057] pci 0000:03:00.0: no hotplug settings from platform
[   95.706060] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[   95.706062] ehci-pci 0000:00:1d.0: using default PCI settings
[   95.706070] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[   95.706072] lpc_ich 0000:00:1f.0: using default PCI settings
[   95.706082] ahci 0000:00:1f.2: no hotplug settings from platform
[   95.706083] ahci 0000:00:1f.2: using default PCI settings
[   95.706090] pci 0000:00:1f.3: no hotplug settings from platform
[   95.706091] pci 0000:00:1f.3: using default PCI settings
[   95.706167] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[   95.706174] i915 0000:00:02.0: no hotplug settings from platform
[   95.706175] i915 0000:00:02.0: using default PCI settings
[   95.706181] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[   95.706184] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[   95.706186] xhci_hcd 0000:00:14.0: using default PCI settings
[   95.706192] mei_me 0000:00:16.0: no hotplug settings from platform
[   95.706194] mei_me 0000:00:16.0: using default PCI settings
[   95.706200] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[   95.706203] pcieport 0000:00:1c.0: no hotplug settings from platform
[   95.706210] r8169 0000:01:00.0: no hotplug settings from platform
[   95.706213] pcieport 0000:00:1c.3: no hotplug settings from platform
[   95.706220] rtl8723be 0000:02:00.0: no hotplug settings from platform
[   95.706224] pcieport 0000:00:1c.4: no hotplug settings from platform
[   95.706228] pci 0000:03:00.0: Max Payload Size 16384, but upstream 0000:00:1c.4 set to 128; if necessary, use "pci=pcie_bus_safe" and report a bug
[   95.706232] pci 0000:03:00.0: no hotplug settings from platform
[   95.706236] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[   95.706237] ehci-pci 0000:00:1d.0: using default PCI settings
[   95.706245] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[   95.706247] lpc_ich 0000:00:1f.0: using default PCI settings
[   95.706256] ahci 0000:00:1f.2: no hotplug settings from platform
[   95.706258] ahci 0000:00:1f.2: using default PCI settings
[   95.706264] pci 0000:00:1f.3: no hotplug settings from platform
[   95.706266] pci 0000:00:1f.3: using default PCI settings
[   95.706526] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[   95.706533] i915 0000:00:02.0: no hotplug settings from platform
[   95.706535] i915 0000:00:02.0: using default PCI settings
[   95.706541] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[   95.706544] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[   95.706546] xhci_hcd 0000:00:14.0: using default PCI settings
[   95.706553] mei_me 0000:00:16.0: no hotplug settings from platform
[   95.706555] mei_me 0000:00:16.0: using default PCI settings
[   95.706563] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[   95.706566] pcieport 0000:00:1c.0: no hotplug settings from platform
[   95.706573] r8169 0000:01:00.0: no hotplug settings from platform
[   95.706576] pcieport 0000:00:1c.3: no hotplug settings from platform
[   95.706632] rtl8723be 0000:02:00.0: no hotplug settings from platform
[   95.706635] pcieport 0000:00:1c.4: no hotplug settings from platform
[   95.706639] pci 0000:03:00.0: Max Payload Size 16384, but upstream 0000:00:1c.4 set to 128; if necessary, use "pci=pcie_bus_safe" and report a bug
[   95.706642] pci 0000:03:00.0: no hotplug settings from platform
[   95.706644] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[   95.706645] ehci-pci 0000:00:1d.0: using default PCI settings
[   95.706651] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[   95.706653] lpc_ich 0000:00:1f.0: using default PCI settings
[   95.706660] ahci 0000:00:1f.2: no hotplug settings from platform
[   95.706661] ahci 0000:00:1f.2: using default PCI settings
[   95.706666] pci 0000:00:1f.3: no hotplug settings from platform
[   95.706667] pci 0000:00:1f.3: using default PCI settings
[   95.706698] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[   95.706702] i915 0000:00:02.0: no hotplug settings from platform
[   95.706703] i915 0000:00:02.0: using default PCI settings
[   95.706707] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[   95.706710] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[   95.706712] xhci_hcd 0000:00:14.0: using default PCI settings
[   95.706718] mei_me 0000:00:16.0: no hotplug settings from platform
[   95.706719] mei_me 0000:00:16.0: using default PCI settings
[   95.706726] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[   95.706730] pcieport 0000:00:1c.0: no hotplug settings from platform
[   95.706737] r8169 0000:01:00.0: no hotplug settings from platform
[   95.706740] pcieport 0000:00:1c.3: no hotplug settings from platform
[   95.706747] rtl8723be 0000:02:00.0: no hotplug settings from platform
[   95.706749] pcieport 0000:00:1c.4: no hotplug settings from platform
[   95.706752] pci 0000:03:00.0: Max Payload Size 16384, but upstream 0000:00:1c.4 set to 128; if necessary, use "pci=pcie_bus_safe" and report a bug
[   95.706755] pci 0000:03:00.0: no hotplug settings from platform
[   95.706758] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[   95.706759] ehci-pci 0000:00:1d.0: using default PCI settings
[   95.706767] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[   95.706769] lpc_ich 0000:00:1f.0: using default PCI settings
[   95.706778] ahci 0000:00:1f.2: no hotplug settings from platform
[   95.706780] ahci 0000:00:1f.2: using default PCI settings
[   95.706785] pci 0000:00:1f.3: no hotplug settings from platform
[   95.706787] pci 0000:00:1f.3: using default PCI settings
[   95.706844] acpi MSFT1111:00: Cannot transition to power state D3cold for parent in (unknown)
[   95.706848] acpi INT33C2:00: Cannot transition to non-D0 state from D3
[   95.706850] acpi MSFT0002:00: Cannot transition to power state D3cold for parent in (unknown)
[   95.706852] acpi ELAN1010:00: Cannot transition to power state D3cold for parent in (unknown)
[   95.706855] acpi INT33C3:00: Cannot transition to non-D0 state from D3
[   95.706857] acpi INT33C0:00: Cannot transition to non-D0 state from D3
[   95.706859] acpi INT33C1:00: Cannot transition to non-D0 state from D3
[   95.706861] acpi INT33C4:00: Cannot transition to non-D0 state from D3
[   95.706864] acpi INT33C5:00: Cannot transition to non-D0 state from D3
[   95.706875] acpi device:26: Cannot transition to power state D3cold for parent in (unknown)
[   95.706877] acpi INT33C6:00: Cannot transition to non-D0 state from D3
[   95.707319] pci_bus 0000:01: Allocating resources
[   95.707335] pci_bus 0000:02: Allocating resources
[   95.707349] pci_bus 0000:03: Allocating resources
[   95.707360] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[   95.707367] i915 0000:00:02.0: no hotplug settings from platform
[   95.707369] i915 0000:00:02.0: using default PCI settings
[   95.707375] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[   95.707378] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[   95.707380] xhci_hcd 0000:00:14.0: using default PCI settings
[   95.707387] mei_me 0000:00:16.0: no hotplug settings from platform
[   95.707389] mei_me 0000:00:16.0: using default PCI settings
[   95.707396] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[   95.707400] pcieport 0000:00:1c.0: no hotplug settings from platform
[   95.707408] r8169 0000:01:00.0: no hotplug settings from platform
[   95.707411] pcieport 0000:00:1c.3: no hotplug settings from platform
[   95.707419] rtl8723be 0000:02:00.0: no hotplug settings from platform
[   95.707422] pcieport 0000:00:1c.4: no hotplug settings from platform
[   95.707426] pci 0000:03:00.0: Max Payload Size 16384, but upstream 0000:00:1c.4 set to 128; if necessary, use "pci=pcie_bus_safe" and report a bug
[   95.707431] pci 0000:03:00.0: no hotplug settings from platform
[   95.707434] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[   95.707435] ehci-pci 0000:00:1d.0: using default PCI settings
[   95.707443] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[   95.707444] lpc_ich 0000:00:1f.0: using default PCI settings
[   95.707454] ahci 0000:00:1f.2: no hotplug settings from platform
[   95.707455] ahci 0000:00:1f.2: using default PCI settings
[   95.707462] pci 0000:00:1f.3: no hotplug settings from platform
[   95.707463] pci 0000:00:1f.3: using default PCI settings
[   95.707531] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[   95.707538] i915 0000:00:02.0: no hotplug settings from platform
[   95.707540] i915 0000:00:02.0: using default PCI settings
[   95.707545] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[   95.707548] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[   95.707550] xhci_hcd 0000:00:14.0: using default PCI settings
[   95.707556] mei_me 0000:00:16.0: no hotplug settings from platform
[   95.707558] mei_me 0000:00:16.0: using default PCI settings
[   95.707565] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[   95.707568] pcieport 0000:00:1c.0: no hotplug settings from platform
[   95.707575] r8169 0000:01:00.0: no hotplug settings from platform
[   95.707579] pcieport 0000:00:1c.3: no hotplug settings from platform
[   95.707586] rtl8723be 0000:02:00.0: no hotplug settings from platform
[   95.707589] pcieport 0000:00:1c.4: no hotplug settings from platform
[   95.707594] pci 0000:03:00.0: Max Payload Size 16384, but upstream 0000:00:1c.4 set to 128; if necessary, use "pci=pcie_bus_safe" and report a bug
[   95.707599] pci 0000:03:00.0: no hotplug settings from platform
[   95.707602] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[   95.707604] ehci-pci 0000:00:1d.0: using default PCI settings
[   95.707612] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[   95.707614] lpc_ich 0000:00:1f.0: using default PCI settings
[   95.707623] ahci 0000:00:1f.2: no hotplug settings from platform
[   95.707625] ahci 0000:00:1f.2: using default PCI settings
[   95.707631] pci 0000:00:1f.3: no hotplug settings from platform
[   95.707633] pci 0000:00:1f.3: using default PCI settings
[   95.707791] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[   95.707796] i915 0000:00:02.0: no hotplug settings from platform
[   95.707797] i915 0000:00:02.0: using default PCI settings
[   95.707801] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[   95.707803] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[   95.707804] xhci_hcd 0000:00:14.0: using default PCI settings
[   95.707810] mei_me 0000:00:16.0: no hotplug settings from platform
[   95.707811] mei_me 0000:00:16.0: using default PCI settings
[   95.707816] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[   95.707818] pcieport 0000:00:1c.0: no hotplug settings from platform
[   95.707824] r8169 0000:01:00.0: no hotplug settings from platform
[   95.707826] pcieport 0000:00:1c.3: no hotplug settings from platform
[   95.707831] rtl8723be 0000:02:00.0: no hotplug settings from platform
[   95.707833] pcieport 0000:00:1c.4: no hotplug settings from platform
[   95.707837] pci 0000:03:00.0: Max Payload Size 16384, but upstream 0000:00:1c.4 set to 128; if necessary, use "pci=pcie_bus_safe" and report a bug
[   95.707840] pci 0000:03:00.0: no hotplug settings from platform
[   95.707842] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[   95.707843] ehci-pci 0000:00:1d.0: using default PCI settings
[   95.707849] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[   95.707850] lpc_ich 0000:00:1f.0: using default PCI settings
[   95.707858] ahci 0000:00:1f.2: no hotplug settings from platform
[   95.707859] ahci 0000:00:1f.2: using default PCI settings
[   95.707864] pci 0000:00:1f.3: no hotplug settings from platform
[   95.707865] pci 0000:00:1f.3: using default PCI settings
[   95.922145] wlan0: deauthenticating from 2c:41:38:fb:6d:b2 by local choice (Reason: 3=DEAUTH_LEAVING)
[   95.955275] cfg80211: Calling CRDA to update world regulatory domain
[   95.957790] cfg80211: World regulatory domain updated:
[   95.957793] cfg80211:  DFS Master region: unset
[   95.957794] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   95.957796] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   95.957798] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   95.957799] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[   95.957800] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   95.957801] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   96.351322] PM: Syncing filesystems ... done.
[   96.372384] PM: Preparing system for mem sleep
[   96.372505] Freezing user space processes ... (elapsed 0.001 seconds) done.
[   96.374128] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[   96.375232] PM: Entering mem sleep
[   96.375272] Suspending console(s) (use no_console_suspend to debug)
[   96.375542] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[   96.375698] sd 0:0:0:0: [sda] Stopping disk
[   96.717505] PM: suspend of devices complete after 341.920 msecs
[   96.733514] PM: late suspend of devices complete after 15.996 msecs
[   96.734806] r8169 0000:01:00.0: System wakeup enabled by ACPI
[   96.735082] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[   96.735253] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[   96.750175] PM: noirq suspend of devices complete after 16.649 msecs
[   96.750457] ACPI: Preparing to enter system sleep state S3
[   96.751609] PM: Saving platform NVS memory
[   96.752035] Disabling non-boot CPUs ...
[   96.752066] intel_pstate CPU 1 exiting
[   96.853549] smpboot: CPU 1 is now offline
[   96.853777] intel_pstate CPU 2 exiting
[   96.957614] smpboot: CPU 2 is now offline
[   96.957822] intel_pstate CPU 3 exiting
[   96.958001] Broke affinity for irq 23
[   96.958003] Broke affinity for irq 59
[   96.958004] Broke affinity for irq 60
[   96.959011] smpboot: CPU 3 is now offline
[   96.962032] ACPI: Low-level resume complete
[   96.962109] PM: Restoring platform NVS memory
[   96.962780] Enabling non-boot CPUs ...
[   96.962846] x86: Booting SMP configuration:
[   96.962849] smpboot: Booting Node 0 Processor 1 APIC 0x1
[   96.973532] Initializing CPU#1
[   96.979451] Intel pstate controlling: cpu 1
[   96.979528] CPU1 is up
[   96.979553] smpboot: Booting Node 0 Processor 2 APIC 0x2
[   96.990178] Initializing CPU#2
[   96.995454] Intel pstate controlling: cpu 2
[   96.995514] CPU2 is up
[   96.995534] smpboot: Booting Node 0 Processor 3 APIC 0x3
[   97.005985] Initializing CPU#3
[   97.011043] Intel pstate controlling: cpu 3
[   97.011095] CPU3 is up
[   97.016239] ACPI: Waking up from system sleep state S3
[   97.017705] acpi LNXPOWER:01: Turning OFF
[   97.429764] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[   97.630433] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[  101.090473] PM: noirq resume of devices complete after 4070.262 msecs
[  101.090699] PM: early resume of devices complete after 0.206 msecs
[  101.090788] mei_me 0000:00:16.0: irq 62 for MSI/MSI-X
[  101.090849] snd_hda_intel 0000:00:03.0: irq 64 for MSI/MSI-X
[  101.090855] r8169 0000:01:00.0: System wakeup disabled by ACPI
[  101.091616] rtlwifi: wireless switch is on
[  101.091793] snd_hda_intel 0000:00:1b.0: irq 65 for MSI/MSI-X
[  101.103739] sd 0:0:0:0: [sda] Starting disk
[  101.423850] ata3: SATA link down (SStatus 0 SControl 300)
[  101.423863] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  101.423888] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  101.423898] ata4: SATA link down (SStatus 0 SControl 300)
[  101.424950] ata1.00: configured for UDMA/133
[  101.430275] ata2.00: configured for UDMA/100
[  101.460121] usb 2-1: reset full-speed USB device number 2 using xhci_hcd
[  101.460128] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
[  101.460129] usb 2-1: hub failed to enable device, error -22
[  101.571983] usb 2-1: reset full-speed USB device number 2 using xhci_hcd
[  101.572082] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
[  101.572096] usb 2-1: hub failed to enable device, error -22
[  101.684046] usb 2-1: reset full-speed USB device number 2 using xhci_hcd
[  101.701084] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep f6936940
[  101.701085] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep f6936980
[  101.812361] usb 2-4: reset high-speed USB device number 3 using xhci_hcd
[  101.812367] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
[  101.812368] usb 2-4: hub failed to enable device, error -22
[  101.924238] usb 2-4: reset high-speed USB device number 3 using xhci_hcd
[  101.924334] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
[  101.924335] usb 2-4: hub failed to enable device, error -22
[  102.036252] usb 2-4: reset high-speed USB device number 3 using xhci_hcd
[  102.052599] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep f68980c0
[  102.052600] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep f68980f0
[  102.052602] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep f6898120
[  102.164556] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[  102.164582] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 3.
[  102.164583] usb 2-6: hub failed to enable device, error -22
[  102.276503] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[  102.276509] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 3.
[  102.276510] usb 2-6: hub failed to enable device, error -22
[  102.388486] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[  102.464663] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep f6936b40
[  102.572814] usb 2-7: reset full-speed USB device number 5 using xhci_hcd
[  102.572833] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4.
[  102.572834] usb 2-7: hub failed to enable device, error -22
[  102.684658] usb 2-7: reset full-speed USB device number 5 using xhci_hcd
[  102.684677] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4.
[  102.684678] usb 2-7: hub failed to enable device, error -22
[  102.796727] usb 2-7: reset full-speed USB device number 5 using xhci_hcd
[  102.813045] usb 2-7: No LPM exit latency info found, disabling LPM.
[  102.813400] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep f688e840
[  102.813401] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep f688e870
[  102.813402] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep f688e8a0
[  102.813403] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep f68d2ba0
[  102.813404] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep f68d2bd0
[  102.813916] PM: resume of devices complete after 1722.159 msecs
[  102.814259] PM: Finishing wakeup.
[  102.814260] Restarting tasks ...
[  102.814291] r8169 0000:01:00.0: no hotplug settings from platform
[  102.814317] rtl8723be 0000:02:00.0: no hotplug settings from platform
[  102.814408] pci 0000:03:00.0: Max Payload Size 16384, but upstream 0000:00:1c.4 set to 128; if necessary, use "pci=pcie_bus_safe" and report a bug
[  102.814411] pci 0000:03:00.0: no hotplug settings from platform
[  102.815603] pci_bus 0000:01: Allocating resources
[  102.815618] pci_bus 0000:02: Allocating resources
[  102.815630] pci_bus 0000:03: Allocating resources
[  102.815640] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[  102.815647] i915 0000:00:02.0: no hotplug settings from platform
[  102.815649] i915 0000:00:02.0: using default PCI settings
[  102.815654] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[  102.815656] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[  102.815657] xhci_hcd 0000:00:14.0: using default PCI settings
[  102.815663] mei_me 0000:00:16.0: no hotplug settings from platform
[  102.815665] mei_me 0000:00:16.0: using default PCI settings
[  102.815672] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[  102.815675] pcieport 0000:00:1c.0: no hotplug settings from platform
[  102.815683] r8169 0000:01:00.0: no hotplug settings from platform
[  102.815686] pcieport 0000:00:1c.3: no hotplug settings from platform
[  102.815693] rtl8723be 0000:02:00.0: no hotplug settings from platform
[  102.815697] pcieport 0000:00:1c.4: no hotplug settings from platform
[  102.815701] pci 0000:03:00.0: Max Payload Size 16384, but upstream 0000:00:1c.4 set to 128; if necessary, use "pci=pcie_bus_safe" and report a bug
[  102.815706] pci 0000:03:00.0: no hotplug settings from platform
[  102.815709] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[  102.815711] ehci-pci 0000:00:1d.0: using default PCI settings
[  102.815718] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[  102.815719] lpc_ich 0000:00:1f.0: using default PCI settings
[  102.815727] ahci 0000:00:1f.2: no hotplug settings from platform
[  102.815728] ahci 0000:00:1f.2: using default PCI settings
[  102.815733] pci 0000:00:1f.3: no hotplug settings from platform
[  102.815734] pci 0000:00:1f.3: using default PCI settings
[  102.815987] pci_bus 0000:01: Allocating resources
[  102.815999] pci_bus 0000:02: Allocating resources
[  102.816010] pci_bus 0000:03: Allocating resources
[  102.816019] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[  102.816023] i915 0000:00:02.0: no hotplug settings from platform
[  102.816025] i915 0000:00:02.0: using default PCI settings
[  102.816029] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[  102.816031] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[  102.816032] xhci_hcd 0000:00:14.0: using default PCI settings
[  102.816038] mei_me 0000:00:16.0: no hotplug settings from platform
[  102.816039] mei_me 0000:00:16.0: using default PCI settings
[  102.816044] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[  102.816047] pcieport 0000:00:1c.0: no hotplug settings from platform
[  102.816052] r8169 0000:01:00.0: no hotplug settings from platform
[  102.816054] pcieport 0000:00:1c.3: no hotplug settings from platform
[  102.816060] rtl8723be 0000:02:00.0: no hotplug settings from platform
[  102.816062] pcieport 0000:00:1c.4: no hotplug settings from platform
[  102.816065] pci 0000:03:00.0: Max Payload Size 16384, but upstream 0000:00:1c.4 set to 128; if necessary, use "pci=pcie_bus_safe" and report a bug
[  102.816068] pci 0000:03:00.0: no hotplug settings from platform
[  102.816070] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[  102.816072] ehci-pci 0000:00:1d.0: using default PCI settings
[  102.816078] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[  102.816079] lpc_ich 0000:00:1f.0: using default PCI settings
[  102.816086] ahci 0000:00:1f.2: no hotplug settings from platform
[  102.816088] ahci 0000:00:1f.2: using default PCI settings
[  102.816092] pci 0000:00:1f.3: no hotplug settings from platform
[  102.816094] pci 0000:00:1f.3: using default PCI settings
[  102.820064] done.
[  102.900768] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[  103.775341] r8169 0000:01:00.0 eth0: link down
[  103.775446] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  104.253029] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  105.955465] wlan0: authenticate with 2c:41:38:fb:6d:b2
[  105.974995] wlan0: send auth to 2c:41:38:fb:6d:b2 (try 1/3)
[  105.977084] wlan0: authenticated
[  105.978620] wlan0: associate with 2c:41:38:fb:6d:b2 (try 1/3)
[  105.983170] wlan0: RX AssocResp from 2c:41:38:fb:6d:b2 (capab=0x421 status=0 aid=17)
[  105.983290] wlan0: associated
[  105.983297] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  105.983778] wlan0: deauthenticating from 2c:41:38:fb:6d:b2 by local choice (Reason: 2=PREV_AUTH_NOT_VALID)
[  106.016970] cfg80211: Calling CRDA to update world regulatory domain
[  106.016993] wlan0: authenticate with 2c:41:38:fb:6d:b2
[  106.027129] wlan0: send auth to 2c:41:38:fb:6d:b2 (try 1/3)
[  106.027251] cfg80211: World regulatory domain updated:
[  106.027254] cfg80211:  DFS Master region: unset
[  106.027255] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[  106.027257] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[  106.027259] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[  106.027260] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[  106.027261] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[  106.027262] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[  106.043955] wlan0: authenticated
[  106.046679] wlan0: associate with 2c:41:38:fb:6d:b2 (try 1/3)
[  106.050977] wlan0: RX AssocResp from 2c:41:38:fb:6d:b2 (capab=0x421 status=0 aid=17)
[  106.051105] wlan0: associated
[  116.059218] wlan0: deauthenticating from 2c:41:38:fb:6d:b2 by local choice (Reason: 3=DEAUTH_LEAVING)
[  116.091075] cfg80211: Calling CRDA to update world regulatory domain
[  116.093238] cfg80211: World regulatory domain updated:
[  116.093240] cfg80211:  DFS Master region: unset
[  116.093241] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[  116.093243] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[  116.093244] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[  116.093245] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[  116.093247] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[  116.093248] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[  128.997391] wlan0: authenticate with 2c:41:38:fb:ca:72
[  129.017018] wlan0: send auth to 2c:41:38:fb:ca:72 (try 1/3)
[  129.027862] wlan0: authenticated
[  129.028755] wlan0: associate with 2c:41:38:fb:ca:72 (try 1/3)
[  129.062243] wlan0: RX AssocResp from 2c:41:38:fb:ca:72 (capab=0x421 status=0 aid=7)
[  129.062363] wlan0: associated
[  164.406775] wlan0: authenticate with 2c:41:38:fb:6d:b2
[  164.416896] wlan0: send auth to 2c:41:38:fb:6d:b2 (try 1/3)
[  164.417005] cfg80211: Calling CRDA to update world regulatory domain
[  164.419599] cfg80211: World regulatory domain updated:
[  164.419602] cfg80211:  DFS Master region: unset
[  164.419603] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[  164.419606] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[  164.419607] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[  164.419609] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[  164.419610] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[  164.419611] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[  164.429203] wlan0: authenticated
[  164.430422] wlan0: associate with 2c:41:38:fb:6d:b2 (try 1/3)
[  164.434610] wlan0: RX AssocResp from 2c:41:38:fb:6d:b2 (capab=0x421 status=0 aid=17)
[  164.434734] wlan0: associated
[  300.201594] mce: [Hardware Error]: Machine check events logged


Kod Seç Genişlet

[  730.339114] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[  730.339116] lpc_ich 0000:00:1f.0: using default PCI settings
[  730.339124] ahci 0000:00:1f.2: no hotplug settings from platform
[  730.339125] ahci 0000:00:1f.2: using default PCI settings
[  730.339130] pci 0000:00:1f.3: no hotplug settings from platform
[  730.339131] pci 0000:00:1f.3: using default PCI settings
[  730.339400] pci_bus 0000:01: Allocating resources
[  730.339414] pci_bus 0000:02: Allocating resources
[  730.339426] pci_bus 0000:03: Allocating resources
[  730.339436] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[  730.339443] i915 0000:00:02.0: no hotplug settings from platform
[  730.339445] i915 0000:00:02.0: using default PCI settings
[  730.339451] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[  730.339454] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[  730.339455] xhci_hcd 0000:00:14.0: using default PCI settings
[  730.339462] mei_me 0000:00:16.0: no hotplug settings from platform
[  730.339463] mei_me 0000:00:16.0: using default PCI settings
[  730.339470] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[  730.339474] pcieport 0000:00:1c.0: no hotplug settings from platform
[  730.339481] r8169 0000:01:00.0: no hotplug settings from platform
[  730.339484] pcieport 0000:00:1c.3: no hotplug settings from platform
[  730.339491] rtl8723be 0000:02:00.0: no hotplug settings from platform
[  730.339494] pcieport 0000:00:1c.4: no hotplug settings from platform
[  730.339498] pci 0000:03:00.0: Max Payload Size 16384, but upstream 0000:00:1c.4 set to 128; if necessary, use "pci=pcie_bus_safe" and report a bug
[  730.339502] pci 0000:03:00.0: no hotplug settings from platform
[  730.339507] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[  730.339509] ehci-pci 0000:00:1d.0: using default PCI settings
[  730.339517] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[  730.339519] lpc_ich 0000:00:1f.0: using default PCI settings
[  730.339528] ahci 0000:00:1f.2: no hotplug settings from platform
[  730.339529] ahci 0000:00:1f.2: using default PCI settings
[  730.339536] pci 0000:00:1f.3: no hotplug settings from platform
[  730.339537] pci 0000:00:1f.3: using default PCI settings
[  730.348393] done.
[  730.448492] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[  733.848613] r8169 0000:01:00.0 eth0: link down
[  733.848686] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  734.326358] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  736.024927] wlan0: authenticate with 2c:41:38:fb:6d:b2
[  736.045147] wlan0: send auth to 2c:41:38:fb:6d:b2 (try 1/3)
[  736.050406] wlan0: authenticated
[  736.052233] wlan0: associate with 2c:41:38:fb:6d:b2 (try 1/3)
[  736.058221] wlan0: RX AssocResp from 2c:41:38:fb:6d:b2 (capab=0x421 status=0 aid=3)
[  736.058353] wlan0: associated
[  736.058655] wlan0: deauthenticating from 2c:41:38:fb:6d:b2 by local choice (Reason: 2=PREV_AUTH_NOT_VALID)
[  736.090191] cfg80211: Calling CRDA to update world regulatory domain
[  736.090238] wlan0: authenticate with 2c:41:38:fb:6d:b2
[  736.100367] wlan0: send auth to 2c:41:38:fb:6d:b2 (try 1/3)
[  736.100494] cfg80211: World regulatory domain updated:
[  736.100497] cfg80211:  DFS Master region: unset
[  736.100498] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[  736.100501] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[  736.100503] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[  736.100505] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[  736.100507] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[  736.100510] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[  736.102258] wlan0: authenticated
[  736.103913] wlan0: associate with 2c:41:38:fb:6d:b2 (try 1/3)
[  736.110151] wlan0: RX AssocResp from 2c:41:38:fb:6d:b2 (capab=0x421 status=0 aid=3)
[  736.110271] wlan0: associated
[  736.110286] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  746.118433] wlan0: deauthenticating from 2c:41:38:fb:6d:b2 by local choice (Reason: 3=DEAUTH_LEAVING)
[  746.152305] cfg80211: Calling CRDA to update world regulatory domain
[  746.154683] cfg80211: World regulatory domain updated:
[  746.154685] cfg80211:  DFS Master region: unset
[  746.154686] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[  746.154688] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[  746.154690] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[  746.154691] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[  746.154692] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[  746.154693] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[  750.480729] mce: [Hardware Error]: Machine check events logged
[  759.062499] wlan0: authenticate with 2c:41:38:fb:ca:72
[  759.082212] wlan0: send auth to 2c:41:38:fb:ca:72 (try 1/3)
[  759.085515] wlan0: authenticated
[  759.085977] wlan0: associate with 2c:41:38:fb:ca:72 (try 1/3)
[  759.100441] wlan0: RX AssocResp from 2c:41:38:fb:ca:72 (capab=0x421 status=0 aid=7)
[  759.100561] wlan0: associated
[  829.631113] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[  829.631124] i915 0000:00:02.0: no hotplug settings from platform
[  829.631126] i915 0000:00:02.0: using default PCI settings
[  829.631132] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[  829.631135] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[  829.631136] xhci_hcd 0000:00:14.0: using default PCI settings
[  829.631143] mei_me 0000:00:16.0: no hotplug settings from platform
[  829.631144] mei_me 0000:00:16.0: using default PCI settings
[  829.631151] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[  829.631154] pcieport 0000:00:1c.0: no hotplug settings from platform
[  829.631162] r8169 0000:01:00.0: no hotplug settings from platform
[  829.631165] pcieport 0000:00:1c.3: no hotplug settings from platform
[  829.631173] rtl8723be 0000:02:00.0: no hotplug settings from platform
[  829.631176] pcieport 0000:00:1c.4: no hotplug settings from platform
[  829.631181] pci 0000:03:00.0: Max Payload Size 16384, but upstream 0000:00:1c.4 set to 128; if necessary, use "pci=pcie_bus_safe" and report a bug
[  829.631186] pci 0000:03:00.0: no hotplug settings from platform
[  829.631189] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[  829.631191] ehci-pci 0000:00:1d.0: using default PCI settings
[  829.631199] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[  829.631201] lpc_ich 0000:00:1f.0: using default PCI settings
[  829.631210] ahci 0000:00:1f.2: no hotplug settings from platform
[  829.631212] ahci 0000:00:1f.2: using default PCI settings
[  829.631218] pci 0000:00:1f.3: no hotplug settings from platform
[  829.631220] pci 0000:00:1f.3: using default PCI settings
[  829.631296] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[  829.631303] i915 0000:00:02.0: no hotplug settings from platform
[  829.631304] i915 0000:00:02.0: using default PCI settings
[  829.631310] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[  829.631313] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[  829.631315] xhci_hcd 0000:00:14.0: using default PCI settings
[  829.631321] mei_me 0000:00:16.0: no hotplug settings from platform
[  829.631323] mei_me 0000:00:16.0: using default PCI settings
[  829.631330] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[  829.631333] pcieport 0000:00:1c.0: no hotplug settings from platform
[  829.631340] r8169 0000:01:00.0: no hotplug settings from platform
[  829.631344] pcieport 0000:00:1c.3: no hotplug settings from platform
[  829.631351] rtl8723be 0000:02:00.0: no hotplug settings from platform
[  829.631354] pcieport 0000:00:1c.4: no hotplug settings from platform
[  829.631359] pci 0000:03:00.0: Max Payload Size 16384, but upstream 0000:00:1c.4 set to 128; if necessary, use "pci=pcie_bus_safe" and report a bug
[  829.631364] pci 0000:03:00.0: no hotplug settings from platform
[  829.631367] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[  829.631369] ehci-pci 0000:00:1d.0: using default PCI settings
[  829.631377] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[  829.631379] lpc_ich 0000:00:1f.0: using default PCI settings
[  829.631389] ahci 0000:00:1f.2: no hotplug settings from platform
[  829.631390] ahci 0000:00:1f.2: using default PCI settings
[  829.631397] pci 0000:00:1f.3: no hotplug settings from platform
[  829.631398] pci 0000:00:1f.3: using default PCI settings
[  829.631783] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[  829.631791] i915 0000:00:02.0: no hotplug settings from platform
[  829.631793] i915 0000:00:02.0: using default PCI settings
[  829.631799] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[  829.631802] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[  829.631804] xhci_hcd 0000:00:14.0: using default PCI settings
[  829.631810] mei_me 0000:00:16.0: no hotplug settings from platform
[  829.631812] mei_me 0000:00:16.0: using default PCI settings
[  829.631819] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[  829.631822] pcieport 0000:00:1c.0: no hotplug settings from platform
[  829.631830] r8169 0000:01:00.0: no hotplug settings from platform
[  829.631833] pcieport 0000:00:1c.3: no hotplug settings from platform
[  829.631840] rtl8723be 0000:02:00.0: no hotplug settings from platform
[  829.631843] pcieport 0000:00:1c.4: no hotplug settings from platform
[  829.631847] pci 0000:03:00.0: Max Payload Size 16384, but upstream 0000:00:1c.4 set to 128; if necessary, use "pci=pcie_bus_safe" and report a bug
[  829.631853] pci 0000:03:00.0: no hotplug settings from platform
[  829.631856] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[  829.631857] ehci-pci 0000:00:1d.0: using default PCI settings
[  829.631865] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[  829.631867] lpc_ich 0000:00:1f.0: using default PCI settings
[  829.631884] ahci 0000:00:1f.2: no hotplug settings from platform
[  829.631885] ahci 0000:00:1f.2: using default PCI settings
[  829.631892] pci 0000:00:1f.3: no hotplug settings from platform
[  829.631894] pci 0000:00:1f.3: using default PCI settings
[  829.631913] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[  829.631919] i915 0000:00:02.0: no hotplug settings from platform
[  829.631921] i915 0000:00:02.0: using default PCI settings
[  829.631926] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[  829.631929] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[  829.631931] xhci_hcd 0000:00:14.0: using default PCI settings
[  829.631937] mei_me 0000:00:16.0: no hotplug settings from platform
[  829.631939] mei_me 0000:00:16.0: using default PCI settings
[  829.631946] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[  829.631950] pcieport 0000:00:1c.0: no hotplug settings from platform
[  829.631957] r8169 0000:01:00.0: no hotplug settings from platform
[  829.631960] pcieport 0000:00:1c.3: no hotplug settings from platform
[  829.631968] rtl8723be 0000:02:00.0: no hotplug settings from platform
[  829.631971] pcieport 0000:00:1c.4: no hotplug settings from platform
[  829.631976] pci 0000:03:00.0: Max Payload Size 16384, but upstream 0000:00:1c.4 set to 128; if necessary, use "pci=pcie_bus_safe" and report a bug
[  829.631981] pci 0000:03:00.0: no hotplug settings from platform
[  829.631984] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[  829.631986] ehci-pci 0000:00:1d.0: using default PCI settings
[  829.631994] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[  829.631996] lpc_ich 0000:00:1f.0: using default PCI settings
[  829.632005] ahci 0000:00:1f.2: no hotplug settings from platform
[  829.632007] ahci 0000:00:1f.2: using default PCI settings
[  829.632014] pci 0000:00:1f.3: no hotplug settings from platform
[  829.632016] pci 0000:00:1f.3: using default PCI settings
[  829.632092] acpi MSFT1111:00: Cannot transition to power state D3cold for parent in (unknown)
[  829.632095] acpi INT33C2:00: Cannot transition to non-D0 state from D3
[  829.632098] acpi MSFT0002:00: Cannot transition to power state D3cold for parent in (unknown)
[  829.632100] acpi ELAN1010:00: Cannot transition to power state D3cold for parent in (unknown)
[  829.632103] acpi INT33C3:00: Cannot transition to non-D0 state from D3
[  829.632105] acpi INT33C0:00: Cannot transition to non-D0 state from D3
[  829.632107] acpi INT33C1:00: Cannot transition to non-D0 state from D3
[  829.632109] acpi INT33C4:00: Cannot transition to non-D0 state from D3
[  829.632111] acpi INT33C5:00: Cannot transition to non-D0 state from D3
[  829.632121] acpi device:26: Cannot transition to power state D3cold for parent in (unknown)
[  829.632122] acpi INT33C6:00: Cannot transition to non-D0 state from D3
[  829.632556] pci_bus 0000:01: Allocating resources
[  829.632570] pci_bus 0000:02: Allocating resources
[  829.632583] pci_bus 0000:03: Allocating resources
[  829.632593] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[  829.632600] i915 0000:00:02.0: no hotplug settings from platform
[  829.632602] i915 0000:00:02.0: using default PCI settings
[  829.632607] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[  829.632610] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[  829.632612] xhci_hcd 0000:00:14.0: using default PCI settings
[  829.632618] mei_me 0000:00:16.0: no hotplug settings from platform
[  829.632619] mei_me 0000:00:16.0: using default PCI settings
[  829.632626] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[  829.632629] pcieport 0000:00:1c.0: no hotplug settings from platform
[  829.632636] r8169 0000:01:00.0: no hotplug settings from platform
[  829.632639] pcieport 0000:00:1c.3: no hotplug settings from platform
[  829.632646] rtl8723be 0000:02:00.0: no hotplug settings from platform
[  829.632649] pcieport 0000:00:1c.4: no hotplug settings from platform
[  829.632653] pci 0000:03:00.0: Max Payload Size 16384, but upstream 0000:00:1c.4 set to 128; if necessary, use "pci=pcie_bus_safe" and report a bug
[  829.632657] pci 0000:03:00.0: no hotplug settings from platform
[  829.632660] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[  829.632662] ehci-pci 0000:00:1d.0: using default PCI settings
[  829.632669] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[  829.632671] lpc_ich 0000:00:1f.0: using default PCI settings
[  829.632681] ahci 0000:00:1f.2: no hotplug settings from platform
[  829.632682] ahci 0000:00:1f.2: using default PCI settings
[  829.632688] pci 0000:00:1f.3: no hotplug settings from platform
[  829.632690] pci 0000:00:1f.3: using default PCI settings
[  829.632754] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[  829.632761] i915 0000:00:02.0: no hotplug settings from platform
[  829.632762] i915 0000:00:02.0: using default PCI settings
[  829.632767] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[  829.632770] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[  829.632772] xhci_hcd 0000:00:14.0: using default PCI settings
[  829.632778] mei_me 0000:00:16.0: no hotplug settings from platform
[  829.632780] mei_me 0000:00:16.0: using default PCI settings
[  829.632786] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[  829.632789] pcieport 0000:00:1c.0: no hotplug settings from platform
[  829.632796] r8169 0000:01:00.0: no hotplug settings from platform
[  829.632799] pcieport 0000:00:1c.3: no hotplug settings from platform
[  829.632807] rtl8723be 0000:02:00.0: no hotplug settings from platform
[  829.632810] pcieport 0000:00:1c.4: no hotplug settings from platform
[  829.632814] pci 0000:03:00.0: Max Payload Size 16384, but upstream 0000:00:1c.4 set to 128; if necessary, use "pci=pcie_bus_safe" and report a bug
[  829.632819] pci 0000:03:00.0: no hotplug settings from platform
[  829.632822] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[  829.632824] ehci-pci 0000:00:1d.0: using default PCI settings
[  829.632832] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[  829.632833] lpc_ich 0000:00:1f.0: using default PCI settings
[  829.632842] ahci 0000:00:1f.2: no hotplug settings from platform
[  829.632844] ahci 0000:00:1f.2: using default PCI settings
[  829.632851] pci 0000:00:1f.3: no hotplug settings from platform
[  829.632853] pci 0000:00:1f.3: using default PCI settings
[  829.632996] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[  829.633003] i915 0000:00:02.0: no hotplug settings from platform
[  829.633005] i915 0000:00:02.0: using default PCI settings
[  829.633010] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[  829.633013] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[  829.633015] xhci_hcd 0000:00:14.0: using default PCI settings
[  829.633021] mei_me 0000:00:16.0: no hotplug settings from platform
[  829.633023] mei_me 0000:00:16.0: using default PCI settings
[  829.633030] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[  829.633033] pcieport 0000:00:1c.0: no hotplug settings from platform
[  829.633039] r8169 0000:01:00.0: no hotplug settings from platform
[  829.633042] pcieport 0000:00:1c.3: no hotplug settings from platform
[  829.633049] rtl8723be 0000:02:00.0: no hotplug settings from platform
[  829.633052] pcieport 0000:00:1c.4: no hotplug settings from platform
[  829.633056] pci 0000:03:00.0: Max Payload Size 16384, but upstream 0000:00:1c.4 set to 128; if necessary, use "pci=pcie_bus_safe" and report a bug
[  829.633061] pci 0000:03:00.0: no hotplug settings from platform
[  829.633064] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[  829.633066] ehci-pci 0000:00:1d.0: using default PCI settings
[  829.633074] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[  829.633075] lpc_ich 0000:00:1f.0: using default PCI settings
[  829.633084] ahci 0000:00:1f.2: no hotplug settings from platform
[  829.633086] ahci 0000:00:1f.2: using default PCI settings
[  829.633092] pci 0000:00:1f.3: no hotplug settings from platform
[  829.633093] pci 0000:00:1f.3: using default PCI settings
[  829.862673] wlan0: deauthenticating from 2c:41:38:fb:ca:72 by local choice (Reason: 3=DEAUTH_LEAVING)
[  829.895660] cfg80211: Calling CRDA to update world regulatory domain
[  829.898471] cfg80211: World regulatory domain updated:
[  829.898474] cfg80211:  DFS Master region: unset
[  829.898475] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[  829.898477] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[  829.898479] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[  829.898480] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[  829.898481] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[  829.898482] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[  830.391257] PM: Syncing filesystems ... done.
[  830.411121] PM: Preparing system for mem sleep
[  830.411241] Freezing user space processes ... (elapsed 0.001 seconds) done.
[  830.412942] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
[  830.413712] PM: Entering mem sleep
[  830.413757] Suspending console(s) (use no_console_suspend to debug)
[  830.414012] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  830.414179] sd 0:0:0:0: [sda] Stopping disk
[  830.753943] PM: suspend of devices complete after 339.878 msecs
[  830.769944] PM: late suspend of devices complete after 15.988 msecs
[  830.770401] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[  830.770405] r8169 0000:01:00.0: System wakeup enabled by ACPI
[  830.770471] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[  830.786487] PM: noirq suspend of devices complete after 16.530 msecs
[  830.786768] ACPI: Preparing to enter system sleep state S3
[  830.787873] PM: Saving platform NVS memory
[  830.788296] Disabling non-boot CPUs ...
[  830.788321] intel_pstate CPU 1 exiting
[  830.789488] smpboot: CPU 1 is now offline
[  830.790023] intel_pstate CPU 2 exiting
[  830.893971] smpboot: CPU 2 is now offline
[  830.894182] intel_pstate CPU 3 exiting
[  830.998033] smpboot: CPU 3 is now offline
[  831.000959] ACPI: Low-level resume complete
[  831.001036] PM: Restoring platform NVS memory
[  831.001728] Enabling non-boot CPUs ...
[  831.001795] x86: Booting SMP configuration:
[  831.001797] smpboot: Booting Node 0 Processor 1 APIC 0x1
[  831.012494] Initializing CPU#1
[  831.018416] Intel pstate controlling: cpu 1
[  831.018495] CPU1 is up
[  831.018520] smpboot: Booting Node 0 Processor 2 APIC 0x2
[  831.029145] Initializing CPU#2
[  831.034427] Intel pstate controlling: cpu 2
[  831.034490] CPU2 is up
[  831.034510] smpboot: Booting Node 0 Processor 3 APIC 0x3
[  831.044961] Initializing CPU#3
[  831.050009] Intel pstate controlling: cpu 3
[  831.050064] CPU3 is up
[  831.055226] ACPI: Waking up from system sleep state S3
[  831.056705] acpi LNXPOWER:01: Turning OFF
[  831.298319] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[  831.313610] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[  831.313689] PM: noirq resume of devices complete after 256.815 msecs
[  831.313919] PM: early resume of devices complete after 0.209 msecs
[  831.314050] snd_hda_intel 0000:00:03.0: irq 62 for MSI/MSI-X
[  831.316254] mei_me 0000:00:16.0: irq 64 for MSI/MSI-X
[  831.316422] rtlwifi: wireless switch is on
[  831.316435] r8169 0000:01:00.0: System wakeup disabled by ACPI
[  831.316472] snd_hda_intel 0000:00:1b.0: irq 65 for MSI/MSI-X
[  831.329653] sd 0:0:0:0: [sda] Starting disk
[  831.649817] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  831.649842] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  831.649852] ata4: SATA link down (SStatus 0 SControl 300)
[  831.649862] ata3: SATA link down (SStatus 0 SControl 300)
[  831.650902] ata1.00: configured for UDMA/133
[  831.669243] ata2.00: configured for UDMA/100
[  831.682012] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[  831.682108] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 3.
[  831.682122] usb 2-6: hub failed to enable device, error -22
[  831.794031] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[  831.794038] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 3.
[  831.794038] usb 2-6: hub failed to enable device, error -22
[  831.906033] usb 2-6: reset high-speed USB device number 4 using xhci_hcd
[  831.981928] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep f6936b40
[  832.034323] usb 2-4: reset high-speed USB device number 3 using xhci_hcd
[  832.034330] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
[  832.034330] usb 2-4: hub failed to enable device, error -22
[  832.146163] usb 2-4: reset high-speed USB device number 3 using xhci_hcd
[  832.146274] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
[  832.146276] usb 2-4: hub failed to enable device, error -22
[  832.258301] usb 2-4: reset high-speed USB device number 3 using xhci_hcd
[  832.274413] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep f68980c0
[  832.274414] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep f68980f0
[  832.274415] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep f6898120
[  832.386523] usb 2-1: reset full-speed USB device number 2 using xhci_hcd
[  832.386542] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
[  832.386543] usb 2-1: hub failed to enable device, error -22
[  832.498374] usb 2-1: reset full-speed USB device number 2 using xhci_hcd
[  832.498469] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
[  832.498482] usb 2-1: hub failed to enable device, error -22
[  832.538368] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[  832.610455] usb 2-1: reset full-speed USB device number 2 using xhci_hcd
[  832.627632] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep f6936940
[  832.627633] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep f6936980
[  832.738745] usb 2-7: reset full-speed USB device number 5 using xhci_hcd
[  832.738753] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4.
[  832.738754] usb 2-7: hub failed to enable device, error -22
[  832.850668] usb 2-7: reset full-speed USB device number 5 using xhci_hcd
[  832.850687] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4.
[  832.850688] usb 2-7: hub failed to enable device, error -22
[  832.962737] usb 2-7: reset full-speed USB device number 5 using xhci_hcd
[  832.979028] usb 2-7: No LPM exit latency info found, disabling LPM.
[  832.979385] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep f688e840
[  832.979386] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep f688e870
[  832.979386] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep f688e8a0
[  832.979387] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep f68d2ba0
[  832.979388] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep f68d2bd0
[  832.979843] PM: resume of devices complete after 1664.901 msecs
[  832.980171] PM: Finishing wakeup.
[  832.980173] Restarting tasks ...
[  832.980190] r8169 0000:01:00.0: no hotplug settings from platform
[  832.980222] rtl8723be 0000:02:00.0: no hotplug settings from platform
[  832.980345] pci 0000:03:00.0: Max Payload Size 16384, but upstream 0000:00:1c.4 set to 128; if necessary, use "pci=pcie_bus_safe" and report a bug
[  832.980351] pci 0000:03:00.0: no hotplug settings from platform
[  832.980678] pci_bus 0000:01: Allocating resources
[  832.980694] pci_bus 0000:02: Allocating resources
[  832.980707] pci_bus 0000:03: Allocating resources
[  832.980719] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[  832.980727] i915 0000:00:02.0: no hotplug settings from platform
[  832.980728] i915 0000:00:02.0: using default PCI settings
[  832.980734] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[  832.980737] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[  832.980739] xhci_hcd 0000:00:14.0: using default PCI settings
[  832.980745] mei_me 0000:00:16.0: no hotplug settings from platform
[  832.980747] mei_me 0000:00:16.0: using default PCI settings
[  832.980754] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[  832.980757] pcieport 0000:00:1c.0: no hotplug settings from platform
[  832.980765] r8169 0000:01:00.0: no hotplug settings from platform
[  832.980768] pcieport 0000:00:1c.3: no hotplug settings from platform
[  832.980776] rtl8723be 0000:02:00.0: no hotplug settings from platform
[  832.980779] pcieport 0000:00:1c.4: no hotplug settings from platform
[  832.980783] pci 0000:03:00.0: Max Payload Size 16384, but upstream 0000:00:1c.4 set to 128; if necessary, use "pci=pcie_bus_safe" and report a bug
[  832.980789] pci 0000:03:00.0: no hotplug settings from platform
[  832.980792] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[  832.980794] ehci-pci 0000:00:1d.0: using default PCI settings
[  832.980802] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[  832.980804] lpc_ich 0000:00:1f.0: using default PCI settings
[  832.980814] ahci 0000:00:1f.2: no hotplug settings from platform
[  832.980816] ahci 0000:00:1f.2: using default PCI settings
[  832.980822] pci 0000:00:1f.3: no hotplug settings from platform
[  832.980824] pci 0000:00:1f.3: using default PCI settings
[  832.981176] pci_bus 0000:01: Allocating resources
[  832.981189] pci_bus 0000:02: Allocating resources
[  832.981202] pci_bus 0000:03: Allocating resources
[  832.981212] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[  832.981219] i915 0000:00:02.0: no hotplug settings from platform
[  832.981221] i915 0000:00:02.0: using default PCI settings
[  832.981226] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[  832.981229] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[  832.981230] xhci_hcd 0000:00:14.0: using default PCI settings
[  832.981237] mei_me 0000:00:16.0: no hotplug settings from platform
[  832.981238] mei_me 0000:00:16.0: using default PCI settings
[  832.981245] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[  832.981248] pcieport 0000:00:1c.0: no hotplug settings from platform
[  832.981255] r8169 0000:01:00.0: no hotplug settings from platform
[  832.981258] pcieport 0000:00:1c.3: no hotplug settings from platform
[  832.981265] rtl8723be 0000:02:00.0: no hotplug settings from platform
[  832.981268] pcieport 0000:00:1c.4: no hotplug settings from platform
[  832.981273] pci 0000:03:00.0: Max Payload Size 16384, but upstream 0000:00:1c.4 set to 128; if necessary, use "pci=pcie_bus_safe" and report a bug
[  832.981278] pci 0000:03:00.0: no hotplug settings from platform
[  832.981281] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[  832.981283] ehci-pci 0000:00:1d.0: using default PCI settings
[  832.981291] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[  832.981292] lpc_ich 0000:00:1f.0: using default PCI settings
[  832.981301] ahci 0000:00:1f.2: no hotplug settings from platform
[  832.981303] ahci 0000:00:1f.2: using default PCI settings
[  832.981309] pci 0000:00:1f.3: no hotplug settings from platform
[  832.981311] pci 0000:00:1f.3: using default PCI settings
[  832.987920] done.
[  836.887079] r8169 0000:01:00.0 eth0: link down
[  836.887170] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  837.361475] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  838.248173] wlan0: authenticate with 2c:41:38:fb:ea:12
[  838.258302] wlan0: send auth to 2c:41:38:fb:ea:12 (try 1/3)
[  838.260953] wlan0: authenticated
[  838.261848] wlan0: associate with 2c:41:38:fb:ea:12 (try 1/3)
[  838.266397] wlan0: RX AssocResp from 2c:41:38:fb:ea:12 (capab=0x421 status=0 aid=14)
[  838.266531] wlan0: associated
[  838.266553] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  900.576034] mce: [Hardware Error]: Machine check events logged


Kod Seç Genişlet

[  836.887170] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  837.361475] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  838.248173] wlan0: authenticate with 2c:41:38:fb:ea:12
[  838.258302] wlan0: send auth to 2c:41:38:fb:ea:12 (try 1/3)
[  838.260953] wlan0: authenticated
[  838.261848] wlan0: associate with 2c:41:38:fb:ea:12 (try 1/3)
[  838.266397] wlan0: RX AssocResp from 2c:41:38:fb:ea:12 (capab=0x421 status=0 aid=14)
[  838.266531] wlan0: associated
[  838.266553] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  900.576034] mce: [Hardware Error]: Machine check events logged


[heartsmagic]

Şu an nereden bağlısın peki? Kablosuz bir bağlantı görünüyor çünkü. Bu kartın AE modeli çok sıkıntılı bir kart:
https://forum.ubuntu-tr.net/index.php?topic=44043.0

Sende BE modeli var. Onun için bağlantı kopma şikayetleri var gibi ancak şöyle de bir çözüm önerisi mevcut:
http://askubuntu.com/a/543626/32037

Önce sendeki durumu bir anlayalım.

[Pozitron]

Şu an nereden bağlısın peki? Kablosuz bir bağlantı görünüyor çünkü. Bu kartın AE modeli çok sıkıntılı bir kart:
https://forum.ubuntu-tr.net/index.php?topic=44043.0

Sende BE modeli var. Onun için bağlantı kopma şikayetleri var gibi ancak şöyle de bir çözüm önerisi mevcut:
http://askubuntu.com/a/543626/32037

Önce sendeki durumu bir anlayalım.

Üstetki cevabı yazarken okuldaki internete bağlıydım bir süre bağlı kaldı,evdekinde de aynı oluyor bir süre bağlı sonra gidiyor.Hemen bakıyorum linklere


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 13 Mart 2015 - 10:07:22
Be için çözümü denedim fakat bağlantı stabil değil.Yine eskisine göre iyi fakat arada kopuyor.

[heartsmagic]

Kod Seç Genişlet

cat /etc/modprobe.d/rtl8723be.conf
ve ağ koptuğu anda:

Kod Seç Genişlet

dmesg | tail
çıktısını alabilir miyiz?