[Çözüldü] 14.04 turkcell vın problemi

Başlatan ahmet_matematikci, 13 Kasım 2014 - 15:56:11

« önceki - sonraki »

0 Üyeler ve 1 Ziyaretçi konuyu incelemekte.

ahmet_matematikci

İyi Günler.
Forumdaki konuları okudum uygulamaya çalıştım olmadı buraya yazma gereği duydum.
Şirketın kısıtlı sitelere giren vınn sanal bilgisayarda çalışıyor ancak ubuntu 14.04 de çalışmıyor.

Kodlar;

a@abc:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=14.04
DISTRIB_CODENAME=trusty
DISTRIB_DESCRIPTION="Ubuntu 14.04.1 LTS"


Linux abc 3.13.0-39-generic #66-Ubuntu SMP Tue Oct 28 13:31:23 UTC 2014 i686 i686 i686 GNU/Linux


Linux abc 3.13.0-39-generic #66-Ubuntu SMP Tue Oct 28 13:31:23 UTC 2014 i686 i686 i686 GNU/Linux
a@abc:~$ lspci
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4)
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4)
00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b4)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation QM67 Express Chipset Family LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)
0d:00.0 System peripheral: Ricoh Co Ltd MMC/SD Host Controller (rev 08)



a@abc:~$ lsusb
Bus 002 Device 003: ID 17ef:6025 Lenovo
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 04f2:b221 Chicony Electronics Co., Ltd integrated camera
Bus 001 Device 003: ID 12d1:14db Huawei Technologies Co., Ltd.
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


a@abc:~$ rfkill list
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: yes
1: tpacpi_bluetooth_sw: Bluetooth
Soft blocked: yes
Hard blocked: yes


a@abc:~$ sudo lshw -C network
[sudo] password for a:
  *-network               
       açıklama: Eternet interface
       ürün: 82579LM Gigabit Network Connection
       üretici: Intel Corporation
       physical id: 19
       bus info: pci@0000:00:19.0
       mantıksal ad: eth0
       sürüm: 04
       serial: 00:21:cc:c0:fc:96
       boyut: 100Mbit/s
       kapasite: 1Gbit/s
       genişlik: 32 bits
       saat: 33MHz
       kapasiteler: pm msi bus_master cap_list eternet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
       yapılandırma: autonegotiation=on broadcast=yes driver=e1000e driverversion=2.3.2-k duplex=full firmware=0.13-3 ip=192.168.2.5 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s
       kaynaklar: irq:41 bellek:f2500000-f251ffff bellek:f252b000-f252bfff ioport:6080(boyut=32)
  *-network ETKİSİZLEŞTİRİLDİ
       açıklama: Kablosuz arayüz
       ürün: RTL8188CE 802.11b/g/n WiFi Adapter
       üretici: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:03:00.0
       mantıksal ad: wlan0
       sürüm: 01
       serial: 7c:e9:d3:f0:f2:42
       genişlik: 64 bits
       saat: 33MHz
       kapasiteler: pm msi pciexpress bus_master cap_list eternet physical wireless
       yapılandırma: broadcast=yes driver=rtl8192ce driverversion=3.13.0-39-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn
       kaynaklar: irq:17 ioport:5000(boyut=256) bellek:f2400000-f2403fff
  *-network
       açıklama: Eternet interface
       physical id: 2
       mantıksal ad: eth1
       serial: 58:2c:80:13:92:63
       kapasiteler: eternet physical
       yapılandırma: broadcast=yes driver=cdc_ether driverversion=22-Aug-2005 firmware=CDC Ethernet Device ip=192.168.1.100 link=yes multicast=yes


a@abc:~$ ifconfig
eth0      Link encap:Ethernet  HWaddr 00:21:cc:c0:fc:96 
          inet addr:192.168.2.5  Bcast:192.168.2.255  Mask:255.255.255.0
          inet6 addr: fe80::221:ccff:fec0:fc96/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1676 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1705 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:1510679 (1.5 MB)  TX bytes:249259 (249.2 KB)
          Interrupt:20 Hafıza:f2500000-f2520000

eth1      Link encap:Ethernet  HWaddr 58:2c:80:13:92:63 
          inet addr:192.168.1.100  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::5a2c:80ff:fe13:9263/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:326 errors:0 dropped:0 overruns:0 frame:0
          TX packets:913 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:145856 (145.8 KB)  TX bytes:139599 (139.5 KB)

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Sunucu
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:1888 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1888 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:151397 (151.3 KB)  TX bytes:151397 (151.3 KB)


a@abc:~$ iwconfig
wlan0     IEEE 802.11bgn  ESSID:off/any 
          Mode:Managed  Access Point: Not-Associated   Tx-Power=off   
          Retry  long limit:7   RTS thr=2347 B   Fragment thr:off
          Power Management:on
         
lo        no wireless extensions.

eth0      no wireless extensions.

eth1      no wireless extensions.



a@abc:~$ iwlist scanning
wlan0     Failed to read scan data : Network is down

lo        Interface doesn't support scanning.

eth0      Interface doesn't support scanning.

eth1      Interface doesn't support scanning.


a@abc:~$ lsmod
Module                  Size  Used by
pci_stub               12550  1
vboxpci                22896  0
vboxnetadp             25636  0
vboxnetflt             27291  0
vboxdrv               299807  3 vboxnetadp,vboxnetflt,vboxpci
bnep                   18895  2
rfcomm                 53664  0
bluetooth             342208  10 bnep,rfcomm
binfmt_misc            13140  1
snd_hda_codec_hdmi     45440  1
snd_hda_codec_conexant    47785  1
cdc_ether              13967  0
usbnet                 37865  1 cdc_ether
mii                    13654  1 usbnet
uvcvideo               71309  0
videobuf2_vmalloc      13048  1 uvcvideo
videobuf2_memops       13170  1 videobuf2_vmalloc
videobuf2_core         39258  1 uvcvideo
videodev              108503  2 uvcvideo,videobuf2_core
parport_pc             31981  0
snd_hda_intel          42730  3
ppdev                  17391  0
thinkpad_acpi          73263  1
snd_hda_codec         164067  3 snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_intel
arc4                   12536  2
nvram                  14027  1 thinkpad_acpi
snd_hwdep              13272  1 snd_hda_codec
usbserial              38902  0
snd_seq_midi           13132  0
snd_seq_midi_event     14475  1 snd_seq_midi
snd_pcm                85501  3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_rawmidi            25135  1 snd_seq_midi
snd_page_alloc         14230  2 snd_pcm,snd_hda_intel
intel_rapl             18301  0
x86_pkg_temp_thermal    13845  0
intel_powerclamp       14239  0
coretemp               13195  0
snd_seq                55383  2 snd_seq_midi_event,snd_seq_midi
rtl8192ce              52806  0
kvm                   388270  0
crc32_pclmul           12967  0
snd_seq_device         14137  3 snd_seq,snd_rawmidi,snd_seq_midi
rtl_pci                26314  1 rtl8192ce
snd_timer              28584  2 snd_pcm,snd_seq
rtlwifi                52835  2 rtl_pci,rtl8192ce
aesni_intel            18156  0
rtl8192c_common        47340  1 rtl8192ce
aes_i586               16995  1 aesni_intel
xts                    12749  1 aesni_intel
mac80211              546051  3 rtl_pci,rtlwifi,rtl8192ce
lrw                    13057  1 aesni_intel
gf128mul               14503  2 lrw,xts
ablk_helper            13357  1 aesni_intel
i915                  709887  4
joydev                 17101  0
cryptd                 15578  1 ablk_helper
snd                    60939  18 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,thinkpad_acpi,snd_seq_device,snd_seq_midi
serio_raw              13230  0
mei_me                 18195  0
lp                     13299  0
parport                40836  3 lp,ppdev,parport_pc
drm_kms_helper         48868  1 i915
cfg80211              409394  2 mac80211,rtlwifi
lpc_ich                16864  0
drm                   244037  5 i915,drm_kms_helper
mei                    66737  1 mei_me
i2c_algo_bit           13197  1 i915
soundcore              12600  1 snd
wmi                    18673  0
video                  18903  1 i915
mac_hid                13037  0
hid_generic            12492  0
usbhid                 47070  0
hid                    87604  2 hid_generic,usbhid
e1000e                223034  0
psmouse                91357  0
sdhci_pci              18535  0
ahci                   25579  2
ptp                    18445  1 e1000e
libahci                27214  1 ahci
sdhci                  37779  1 sdhci_pci
pps_core               18799  1 ptp


[    0.231087] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.233120] Switched to clocksource hpet
[    0.238375] AppArmor: AppArmor Filesystem Enabled
[    0.238399] pnp: PnP ACPI init
[    0.238410] ACPI: bus type PNP registered
[    0.238806] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.238809] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[    0.238811] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[    0.238813] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[    0.238815] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[    0.238817] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
[    0.238819] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
[    0.238821] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
[    0.238823] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
[    0.238825] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[    0.238826] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[    0.238828] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[    0.238830] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[    0.238832] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.238834] system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved
[    0.238837] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[    0.238839] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[    0.238842] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.238941] system 00:01: [io  0x0400-0x047f] could not be reserved
[    0.238944] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.238946] system 00:01: [io  0x0800-0x080f] has been reserved
[    0.238949] system 00:01: [io  0x15e0-0x15ef] has been reserved
[    0.238951] system 00:01: [io  0x1600-0x167f] has been reserved
[    0.238953] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.238955] system 00:01: [mem 0x00000000-0x00000fff] could not be reserved
[    0.238958] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.238960] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.238962] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.238964] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.238966] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[    0.238968] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.239022] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.239031] pnp 00:03: [dma 4]
[    0.239048] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.239074] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.239106] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.239138] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.239166] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.239192] pnp 00:08: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
[    0.239238] pnp 00:09: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[    0.239650] pnp: PnP ACPI: found 10 devices
[    0.239651] ACPI: bus type PNP unregistered
[    0.239654] PnPBIOS: Disabled by ACPI PNP
[    0.276004] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.276017] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.276020] pci 0000:00:1c.1:   bridge window [io  0x5000-0x5fff]
[    0.276026] pci 0000:00:1c.1:   bridge window [mem 0xf2400000-0xf24fffff]
[    0.276034] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[    0.276038] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
[    0.276043] pci 0000:00:1c.3:   bridge window [mem 0xf1c00000-0xf23fffff]
[    0.276048] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[    0.276054] pci 0000:00:1c.4: PCI bridge to [bus 0d]
[    0.276058] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    0.276065] pci 0000:00:1c.4:   bridge window [mem 0xf1400000-0xf1bfffff]
[    0.276070] pci 0000:00:1c.4:   bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
[    0.276079] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.276081] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.276083] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.276085] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff]
[    0.276087] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff]
[    0.276089] pci_bus 0000:03: resource 0 [io  0x5000-0x5fff]
[    0.276090] pci_bus 0000:03: resource 1 [mem 0xf2400000-0xf24fffff]
[    0.276092] pci_bus 0000:05: resource 0 [io  0x4000-0x4fff]
[    0.276094] pci_bus 0000:05: resource 1 [mem 0xf1c00000-0xf23fffff]
[    0.276096] pci_bus 0000:05: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref]
[    0.276098] pci_bus 0000:0d: resource 0 [io  0x3000-0x3fff]
[    0.276099] pci_bus 0000:0d: resource 1 [mem 0xf1400000-0xf1bfffff]
[    0.276101] pci_bus 0000:0d: resource 2 [mem 0xf0c00000-0xf13fffff 64bit pref]
[    0.276134] NET: Registered protocol family 2
[    0.276311] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.276321] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.276336] TCP: Hash tables configured (established 8192 bind 8192)
[    0.276354] TCP: reno registered
[    0.276356] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.276361] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.276415] NET: Registered protocol family 1
[    0.276426] pci 0000:00:02.0: Boot video device
[    0.276736] PCI: CLS 64 bytes, default 64
[    0.276777] Trying to unpack rootfs image as initramfs...
[    0.591384] Freeing initrd memory: 18292K (f5c36000 - f6e13000)
[    0.591658] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x25
[    0.591665] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x25
[    0.591672] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x25
[    0.591679] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x25
[    0.591737] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.591739] Scanning for low memory corruption every 60 seconds
[    0.592045] Initialise system trusted keyring
[    0.592080] audit: initializing netlink socket (disabled)
[    0.592090] type=2000 audit(1415885863.588:1): initialized
[    0.612320] bounce pool size: 64 pages
[    0.612329] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.613535] zbud: loaded
[    0.613596] VFS: Disk quotas dquot_6.5.2
[    0.613641] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.614043] fuse init (API version 7.22)
[    0.614121] msgmni has been set to 1662
[    0.614175] Key type big_key registered
[    0.614611] Key type asymmetric registered
[    0.614613] Asymmetric key parser 'x509' registered
[    0.614644] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.614678] io scheduler noop registered
[    0.614680] io scheduler deadline registered (default)
[    0.614710] io scheduler cfq registered
[    0.615220] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.615239] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.615277] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    0.615279] vesafb: scrolling: redraw
[    0.615280] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.615441] vesafb: framebuffer at 0xe0000000, mapped to 0xf8480000, using 3072k, total 3072k
[    0.667695] Console: switching to colour frame buffer device 128x48
[    0.719892] fb0: VESA VGA frame buffer device
[    0.719914] intel_idle: MWAIT substates: 0x21120
[    0.719915] intel_idle: v0.4 model 0x2A
[    0.719916] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.720020] ipmi message handler version 39.2
[    0.720241] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.720476] ACPI: AC Adapter [AC] (on-line)
[    0.720597] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    0.720773] ACPI: Lid Switch [LID]
[    0.720855] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[    0.720858] ACPI: Sleep Button [SLPB]
[    0.720932] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.720946] ACPI: Power Button [PWRF]
[    0.722113] thermal LNXTHERM:00: registered as thermal_zone0
[    0.722115] ACPI: Thermal Zone [THM0] (48 C)
[    0.722138] GHES: HEST is not enabled!
[    0.722250] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.722258] isapnp: Scanning for PnP cards...
[    0.723983] Linux agpgart interface v0.103
[    0.724116] tpm_tis 00:09: 1.2 TPM (device-id 0x0, rev-id 78)
[    0.734208] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.734215] ACPI: Battery Slot [BAT0] (battery present)
[    0.781278] tpm_tis 00:09: TPM is disabled/deactivated (0x6)
[    0.782614] brd: module loaded
[    0.783332] loop: module loaded
[    0.783775] libphy: Fixed MDIO Bus: probed
[    0.783884] tun: Universal TUN/TAP device driver, 1.6
[    0.783885] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.783926] PPP generic driver version 2.4.2
[    0.783971] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.783976] ehci-pci: EHCI PCI platform driver
[    0.784067] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.784072] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.784086] ehci-pci 0000:00:1a.0: debug port 2
[    0.788004] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.788023] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf252a000
[    0.797237] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.797273] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.797275] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.797277] usb usb1: Product: EHCI Host Controller
[    0.797278] usb usb1: Manufacturer: Linux 3.13.0-39-generic ehci_hcd
[    0.797280] usb usb1: SerialNumber: 0000:00:1a.0
[    0.797382] hub 1-0:1.0: USB hub found
[    0.797388] hub 1-0:1.0: 3 ports detected
[    0.797555] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.797559] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.797571] ehci-pci 0000:00:1d.0: debug port 2
[    0.801463] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.801479] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf2529000
[    0.813240] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.813274] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.813276] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.813278] usb usb2: Product: EHCI Host Controller
[    0.813279] usb usb2: Manufacturer: Linux 3.13.0-39-generic ehci_hcd
[    0.813281] usb usb2: SerialNumber: 0000:00:1d.0
[    0.813374] hub 2-0:1.0: USB hub found
[    0.813380] hub 2-0:1.0: 3 ports detected
[    0.813472] ehci-platform: EHCI generic platform driver
[    0.813480] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.813481] ohci-pci: OHCI PCI platform driver
[    0.813491] ohci-platform: OHCI generic platform driver
[    0.813497] uhci_hcd: USB Universal Host Controller Interface driver
[    0.813561] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    0.816938] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.816942] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.817055] mousedev: PS/2 mouse device common for all mice
[    0.817233] rtc_cmos 00:06: RTC can wake from S4
[    0.817357] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    0.817386] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.817452] device-mapper: uevent: version 1.0.3
[    0.817520] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    0.817536] platform eisa.0: Probing EISA bus 0
[    0.817538] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    0.817541] platform eisa.0: Cannot allocate resource for EISA slot 1
[    0.817543] platform eisa.0: Cannot allocate resource for EISA slot 2
[    0.817545] platform eisa.0: Cannot allocate resource for EISA slot 3
[    0.817547] platform eisa.0: Cannot allocate resource for EISA slot 4
[    0.817549] platform eisa.0: Cannot allocate resource for EISA slot 5
[    0.817551] platform eisa.0: Cannot allocate resource for EISA slot 6
[    0.817552] platform eisa.0: Cannot allocate resource for EISA slot 7
[    0.817554] platform eisa.0: Cannot allocate resource for EISA slot 8
[    0.817556] platform eisa.0: EISA: Detected 0 cards
[    0.817560] cpufreq-nforce2: No nForce2 chipset.
[    0.817564] ledtrig-cpu: registered to indicate activity on CPUs
[    0.817688] TCP: cubic registered
[    0.817771] NET: Registered protocol family 10
[    0.817946] NET: Registered protocol family 17
[    0.817954] Key type dns_resolver registered
[    0.818135] Using IPI No-Shortcut mode
[    0.818226] Loading compiled-in X.509 certificates
[    0.821430] Loaded X.509 cert 'Magrathea: Glacier signing key: a69631ee8432bd22004ba4daa978cfd92cd55e69'
[    0.821440] registered taskstats version 1
[    0.823047] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.823514] Key type trusted registered
[    0.825131] Key type encrypted registered
[    0.826760] AppArmor: AppArmor sha1 policy hashing enabled
[    0.837273] tpm_tis 00:09: A TPM error (6) occurred attempting to read a pcr value
[    0.837275] IMA: No TPM chip found, activating TPM-bypass!
[    0.837590] regulator-dummy: disabling
[    0.837624]   Magic number: 6:965:634
[    0.837696] rtc_cmos 00:06: setting system clock to 2014-11-13 13:37:43 UTC (1415885863)
[    0.843394] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.843395] EDD information not available.
[    0.843452] PM: Hibernation image not present or could not be loaded.
[    1.033259] isapnp: No Plug & Play device found
[    1.033557] Freeing unused kernel memory: 872K (c19b9000 - c1a93000)
[    1.033623] Write protecting the kernel text: 6544k
[    1.033708] Write protecting the kernel read-only data: 2768k
[    1.033709] NX-protecting the kernel data: 5744k
[    1.044331] systemd-udevd[106]: starting version 204
[    1.066241] pps_core: LinuxPPS API ver. 1 registered
[    1.066244] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.068444] sdhci: Secure Digital Host Controller Interface driver
[    1.068447] sdhci: Copyright(c) Pierre Ossman
[    1.071227] PTP clock support registered
[    1.073950] ahci 0000:00:1f.2: version 3.0
[    1.073955] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e822] (rev 8)
[    1.074155] sdhci-pci 0000:0d:00.0: dummy supplies not allowed
[    1.074156] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[    1.074159] mmc0: no vqmmc regulator found
[    1.074161] sdhci-pci 0000:0d:00.0: dummy supplies not allowed
[    1.074163] mmc0: no vmmc regulator found
[    1.074246] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.074281] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
[    1.083089] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.083092] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.089312] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode
[    1.089318] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[    1.109389] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.117975] scsi0 : ahci
[    1.118079] scsi1 : ahci
[    1.118151] scsi2 : ahci
[    1.118229] scsi3 : ahci
[    1.118309] scsi4 : ahci
[    1.118378] scsi5 : ahci
[    1.118422] ata1: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528100 irq 40
[    1.118425] ata2: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528180 irq 40
[    1.118427] ata3: DUMMY
[    1.118430] ata4: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528280 irq 40
[    1.118432] ata5: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528300 irq 40
[    1.118433] ata6: DUMMY
[    1.118611] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.118631] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[    1.241937] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.241949] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.242346] hub 1-1:1.0: USB hub found
[    1.242455] hub 1-1:1.0: 6 ports detected
[    1.317323] e1000e 0000:00:19.0 eth0: registered PHC clock
[    1.317327] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:21:cc:c0:fc:96
[    1.317329] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    1.317380] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[    1.353364] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.437452] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.465367] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    1.465381] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.465390] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.466473] ata1.00: ATA-8: HITACHI HTS727550A9E364, JF3ZD0H0, max UDMA/100
[    1.466483] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.467759] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    1.467771] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.467778] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.468811] ata1.00: configured for UDMA/100
[    1.469123] scsi 0:0:0:0: Direct-Access     ATA      HITACHI HTS72755 JF3Z PQ: 0 ANSI: 5
[    1.469265] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.469267] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.469297] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.469303] sd 0:0:0:0: [sda] Write Protect is off
[    1.469305] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.469319] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.486223] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.486234] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.486615] hub 2-1:1.0: USB hub found
[    1.486686] hub 2-1:1.0: 8 ports detected
[    1.527293]  sda: sda1 sda2 < sda5 >
[    1.527903] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.561708] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[    1.589400] tsc: Refined TSC clocksource calibration: 2491.905 MHz
[    1.655512] usb 1-1.1: New USB device found, idVendor=12d1, idProduct=14db
[    1.655516] usb 1-1.1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    1.655518] usb 1-1.1: Product: HUAWEI HiLink
[    1.655520] usb 1-1.1: Manufacturer: HUAWEI
[    1.725741] usb 1-1.6: new high-speed USB device number 4 using ehci-pci
[    1.789498] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.794600] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[    1.796318] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[    1.796330] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.800312] ata2.00: ATAPI: HL-DT-ST DVDRAM GT50N, LT20, max UDMA/33
[    1.807469] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[    1.809060] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[    1.809073] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.812933] ata2.00: configured for UDMA/33
[    1.817527] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GT50N     LT20 PQ: 0 ANSI: 5
[    1.823918] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.823922] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.824116] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.824205] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.824649] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b221
[    1.824652] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.824654] usb 1-1.6: Product: Integrated Camera
[    1.824656] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[    1.897701] usb 2-1.2: new low-speed USB device number 3 using ehci-pci
[    1.995506] usb 2-1.2: New USB device found, idVendor=17ef, idProduct=6025
[    1.995517] usb 2-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    1.995524] usb 2-1.2: Product: ThinkPad USB Travel Mouse
[    2.001692] hidraw: raw HID events driver (C) Jiri Kosina
[    2.008337] usbcore: registered new interface driver usbhid
[    2.008339] usbhid: USB HID core driver
[    2.011560] input: ThinkPad USB Travel Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input6
[    2.011716] hid-generic 0003:17EF:6025.0001: input,hidraw0: USB HID v11.10 Mouse [ThinkPad USB Travel Mouse] on usb-0000:00:1d.0-1.2/input0
[    2.048815] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000, board id: 71, fw id: 578367
[    2.048835] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[    2.100558] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[    2.141568] ata4: SATA link down (SStatus 0 SControl 300)
[    2.461626] ata5: SATA link down (SStatus 0 SControl 300)
[    2.589711] Switched to clocksource tsc
[    2.797677] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    3.319500] random: init urandom read with 110 bits of entropy available
[    3.643859] random: nonblocking pool is initialized
[    3.811427] init: plymouth-upstart-bridge main process (176) terminated with status 1
[    3.811437] init: plymouth-upstart-bridge main process ended, respawning
[    3.813686] init: plymouth-upstart-bridge main process (187) terminated with status 1
[    3.813698] init: plymouth-upstart-bridge main process ended, respawning
[    3.815427] init: plymouth-upstart-bridge main process (189) terminated with status 1
[    3.815437] init: plymouth-upstart-bridge main process ended, respawning
[    3.817426] init: plymouth-upstart-bridge main process (190) terminated with status 1
[    3.817434] init: plymouth-upstart-bridge main process ended, respawning
[    3.819028] init: plymouth-upstart-bridge main process (192) terminated with status 1
[    3.819041] init: plymouth-upstart-bridge main process ended, respawning
[    3.821237] init: plymouth-upstart-bridge main process (193) terminated with status 1
[    3.821257] init: plymouth-upstart-bridge main process ended, respawning
[    3.822951] init: plymouth-upstart-bridge main process (195) terminated with status 1
[    3.822962] init: plymouth-upstart-bridge main process ended, respawning
[    3.824914] init: plymouth-upstart-bridge main process (196) terminated with status 1
[    3.824922] init: plymouth-upstart-bridge main process ended, respawning
[    3.826480] init: plymouth-upstart-bridge main process (198) terminated with status 1
[    3.826491] init: plymouth-upstart-bridge main process ended, respawning
[    3.828766] init: plymouth-upstart-bridge main process (199) terminated with status 1
[    3.828780] init: plymouth-upstart-bridge main process ended, respawning
[    3.830593] init: plymouth-upstart-bridge main process (201) terminated with status 1
[    3.830605] init: plymouth-upstart-bridge respawning too fast, stopped
[    5.780922] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[    7.432769] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    7.709990] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7
[   12.273499] Adding 4072444k swap on /dev/sda5.  Priority:-1 extents:1 across:4072444k FS
[   12.339610] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   12.400568] systemd-udevd[317]: starting version 204
[   12.484866] wmi: Mapper loaded
[   12.517181] [drm] Initialized drm 1.1.0 20060810
[   12.524149] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20131115/utaddress-251)
[   12.524156] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.524160] ACPI Warning: 0x00000540-0x0000054f SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20131115/utaddress-251)
[   12.524164] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.524166] ACPI Warning: 0x00000530-0x0000053f SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20131115/utaddress-251)
[   12.524169] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.524171] ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20131115/utaddress-251)
[   12.524174] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.524176] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   12.566591] cfg80211: Calling CRDA to update world regulatory domain
[   12.566929] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
[   12.575231] lp: driver loaded but no devices found
[   12.581455] [drm] Memory usable by graphics device = 2048M
[   12.581460] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[   12.581462] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[   12.581478] Console: switching to colour dummy device 80x25
[   12.603264] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[   12.603274] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   12.603276] [drm] Driver supports precise vblank timestamp query.
[   12.603351] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   12.641000] kvm: disabled by bios
[   12.643945] type=1400 audit(1415885875.302:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=366 comm="apparmor_parser"
[   12.643952] type=1400 audit(1415885875.302:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=366 comm="apparmor_parser"
[   12.643957] type=1400 audit(1415885875.302:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=366 comm="apparmor_parser"
[   12.644525] type=1400 audit(1415885875.302:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=366 comm="apparmor_parser"
[   12.644533] type=1400 audit(1415885875.302:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=366 comm="apparmor_parser"
[   12.644830] type=1400 audit(1415885875.302:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=366 comm="apparmor_parser"
[   12.655337] rtl8192ce: Using firmware rtlwifi/rtl8192cfw.bin
[   12.666862] [drm] Wrong MCH_SSKPD value: 0x16040307
[   12.666865] [drm] This can cause pipe underruns and display issues.
[   12.666867] [drm] Please upgrade your BIOS to fix this.
[   12.695578] kvm: disabled by bios
[   12.730643] usbcore: registered new interface driver usbserial
[   12.730663] usbcore: registered new interface driver usbserial_generic
[   12.730679] usbserial: USB Serial support registered for generic
[   12.736432] Non-volatile memory driver v1.3
[   12.744504] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
[   12.746060] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[   12.746063] thinkpad_acpi: http://ibm-acpi.sf.net/
[   12.746064] thinkpad_acpi: ThinkPad BIOS 83ET67WW (1.37 ), EC unknown
[   12.746065] thinkpad_acpi: Lenovo ThinkPad T420, model 4180JR7
[   12.753200] thinkpad_acpi: detected a 16-level brightness capable ThinkPad
[   12.753319] thinkpad_acpi: radio switch found; radios are disabled
[   12.753393] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[   12.753394] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[   12.755450] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked
[   12.756684] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[   12.756791] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[   12.758322] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8
[   12.762812] fbcon: inteldrmfb (fb0) is primary device
[   12.763736] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[   12.764014] rtlwifi: wireless switch is on
[   12.768490] ppdev: user-space parallel port driver
[   12.851659] Linux video capture interface: v2.00
[   12.866259] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b221)
[   12.867906] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input9
[   12.867980] usbcore: registered new interface driver uvcvideo
[   12.867981] USB Video Class driver (1.1.1)
[   12.926097] cfg80211: World regulatory domain updated:
[   12.926098] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   12.926100] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.926100] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.926101] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.926102] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.926102] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.007472] cdc_ether 1-1.1:1.0 eth1: register 'cdc_ether' at usb-0000:00:1a.0-1.1, CDC Ethernet Device, 58:2c:80:13:92:63
[   13.007493] usbcore: registered new interface driver cdc_ether
[   13.591632] Console: switching to colour frame buffer device 170x48
[   13.594360] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   13.594362] i915 0000:00:02.0: registered panic notifier
[   13.647947] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[   13.668580] acpi device:01: registered as cooling_device5
[   13.668655] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input10
[   13.668760] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   13.668924] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   13.687679] hda_codec: CX20590: BIOS auto-probing.
[   13.688102] autoconfig: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[   13.688105]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   13.688107]    hp_outs=2 (0x1c/0x19/0x0/0x0/0x0)
[   13.688108]    mono: mono_out=0x0
[   13.688109]    inputs:
[   13.688111]      Mic=0x1b
[   13.688112]      Internal Mic=0x23
[   13.688114]      Dock Mic=0x1a
[   13.689160] hda_codec: Enable sync_write for stable communication
[   13.701168] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[   13.701315] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   13.701458] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   13.701597] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   13.701724] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   13.701796] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   13.701870] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   13.724440] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   13.807714] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   13.994656] init: failsafe main process (716) killed by TERM signal
[   14.301221] type=1400 audit(1415885876.958:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=805 comm="apparmor_parser"
[   14.301229] type=1400 audit(1415885876.958:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=805 comm="apparmor_parser"
[   14.301632] type=1400 audit(1415885876.958:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=805 comm="apparmor_parser"
[   14.743823] init: cups main process (806) killed by HUP signal
[   14.743837] init: cups main process ended, respawning
[   14.762566] Bluetooth: Core ver 2.17
[   14.762588] NET: Registered protocol family 31
[   14.762590] Bluetooth: HCI device and connection manager initialized
[   14.762597] Bluetooth: HCI socket layer initialized
[   14.762601] Bluetooth: L2CAP socket layer initialized
[   14.762606] Bluetooth: SCO socket layer initialized
[   14.768305] Bluetooth: RFCOMM TTY layer initialized
[   14.768312] Bluetooth: RFCOMM socket layer initialized
[   14.768316] Bluetooth: RFCOMM ver 1.11
[   14.799529] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   14.799532] Bluetooth: BNEP filters: protocol multicast
[   14.799539] Bluetooth: BNEP socket layer initialized
[   15.400853] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[   15.503913] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[   15.504178] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.504606] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.508872] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   15.782155] init: samba-ad-dc main process (865) terminated with status 1
[   15.962400] type=1400 audit(1415885878.618:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=913 comm="apparmor_parser"
[   17.028184] vboxdrv: module verification failed: signature and/or  required key missing - tainting kernel
[   17.030652] vboxdrv: Found 4 processor cores.
[   17.030933] vboxdrv: fAsync=0 offMin=0xe3 offMax=0xa86
[   17.031019] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   17.031021] vboxdrv: Successfully loaded version 4.3.10_Ubuntu (interface 0x001a0007).
[   17.045268] vboxpci: IOMMU not found (not registered)
[   44.366746] audit_printk_skb: 150 callbacks suppressed
[   44.366750] type=1400 audit(1415885907.018:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2195 comm="apparmor_parser"
[   44.366756] type=1400 audit(1415885907.018:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2195 comm="apparmor_parser"
[   44.367163] type=1400 audit(1415885907.018:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2195 comm="apparmor_parser"
[  210.277903] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[  210.380869] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[  210.381347] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  260.279031] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[  260.279043] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
[  260.279088] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready


[    0.238825] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[    0.238826] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[    0.238828] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[    0.238830] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[    0.238832] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.238834] system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved
[    0.238837] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[    0.238839] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[    0.238842] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.238941] system 00:01: [io  0x0400-0x047f] could not be reserved
[    0.238944] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.238946] system 00:01: [io  0x0800-0x080f] has been reserved
[    0.238949] system 00:01: [io  0x15e0-0x15ef] has been reserved
[    0.238951] system 00:01: [io  0x1600-0x167f] has been reserved
[    0.238953] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.238955] system 00:01: [mem 0x00000000-0x00000fff] could not be reserved
[    0.238958] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.238960] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.238962] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.238964] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.238966] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[    0.238968] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.239022] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.239031] pnp 00:03: [dma 4]
[    0.239048] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.239074] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.239106] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.239138] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.239166] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.239192] pnp 00:08: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
[    0.239238] pnp 00:09: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[    0.239650] pnp: PnP ACPI: found 10 devices
[    0.239651] ACPI: bus type PNP unregistered
[    0.239654] PnPBIOS: Disabled by ACPI PNP
[    0.276004] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.276017] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.276020] pci 0000:00:1c.1:   bridge window [io  0x5000-0x5fff]
[    0.276026] pci 0000:00:1c.1:   bridge window [mem 0xf2400000-0xf24fffff]
[    0.276034] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[    0.276038] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
[    0.276043] pci 0000:00:1c.3:   bridge window [mem 0xf1c00000-0xf23fffff]
[    0.276048] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[    0.276054] pci 0000:00:1c.4: PCI bridge to [bus 0d]
[    0.276058] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    0.276065] pci 0000:00:1c.4:   bridge window [mem 0xf1400000-0xf1bfffff]
[    0.276070] pci 0000:00:1c.4:   bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
[    0.276079] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.276081] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.276083] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.276085] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff]
[    0.276087] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff]
[    0.276089] pci_bus 0000:03: resource 0 [io  0x5000-0x5fff]
[    0.276090] pci_bus 0000:03: resource 1 [mem 0xf2400000-0xf24fffff]
[    0.276092] pci_bus 0000:05: resource 0 [io  0x4000-0x4fff]
[    0.276094] pci_bus 0000:05: resource 1 [mem 0xf1c00000-0xf23fffff]
[    0.276096] pci_bus 0000:05: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref]
[    0.276098] pci_bus 0000:0d: resource 0 [io  0x3000-0x3fff]
[    0.276099] pci_bus 0000:0d: resource 1 [mem 0xf1400000-0xf1bfffff]
[    0.276101] pci_bus 0000:0d: resource 2 [mem 0xf0c00000-0xf13fffff 64bit pref]
[    0.276134] NET: Registered protocol family 2
[    0.276311] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.276321] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.276336] TCP: Hash tables configured (established 8192 bind 8192)
[    0.276354] TCP: reno registered
[    0.276356] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.276361] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.276415] NET: Registered protocol family 1
[    0.276426] pci 0000:00:02.0: Boot video device
[    0.276736] PCI: CLS 64 bytes, default 64
[    0.276777] Trying to unpack rootfs image as initramfs...
[    0.591384] Freeing initrd memory: 18292K (f5c36000 - f6e13000)
[    0.591658] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x25
[    0.591665] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x25
[    0.591672] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x25
[    0.591679] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x25
[    0.591737] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.591739] Scanning for low memory corruption every 60 seconds
[    0.592045] Initialise system trusted keyring
[    0.592080] audit: initializing netlink socket (disabled)
[    0.592090] type=2000 audit(1415885863.588:1): initialized
[    0.612320] bounce pool size: 64 pages
[    0.612329] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.613535] zbud: loaded
[    0.613596] VFS: Disk quotas dquot_6.5.2
[    0.613641] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.614043] fuse init (API version 7.22)
[    0.614121] msgmni has been set to 1662
[    0.614175] Key type big_key registered
[    0.614611] Key type asymmetric registered
[    0.614613] Asymmetric key parser 'x509' registered
[    0.614644] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.614678] io scheduler noop registered
[    0.614680] io scheduler deadline registered (default)
[    0.614710] io scheduler cfq registered
[    0.615220] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.615239] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.615277] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    0.615279] vesafb: scrolling: redraw
[    0.615280] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.615441] vesafb: framebuffer at 0xe0000000, mapped to 0xf8480000, using 3072k, total 3072k
[    0.667695] Console: switching to colour frame buffer device 128x48
[    0.719892] fb0: VESA VGA frame buffer device
[    0.719914] intel_idle: MWAIT substates: 0x21120
[    0.719915] intel_idle: v0.4 model 0x2A
[    0.719916] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.720020] ipmi message handler version 39.2
[    0.720241] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.720476] ACPI: AC Adapter [AC] (on-line)
[    0.720597] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    0.720773] ACPI: Lid Switch [LID]
[    0.720855] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[    0.720858] ACPI: Sleep Button [SLPB]
[    0.720932] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.720946] ACPI: Power Button [PWRF]
[    0.722113] thermal LNXTHERM:00: registered as thermal_zone0
[    0.722115] ACPI: Thermal Zone [THM0] (48 C)
[    0.722138] GHES: HEST is not enabled!
[    0.722250] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.722258] isapnp: Scanning for PnP cards...
[    0.723983] Linux agpgart interface v0.103
[    0.724116] tpm_tis 00:09: 1.2 TPM (device-id 0x0, rev-id 78)
[    0.734208] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.734215] ACPI: Battery Slot [BAT0] (battery present)
[    0.781278] tpm_tis 00:09: TPM is disabled/deactivated (0x6)
[    0.782614] brd: module loaded
[    0.783332] loop: module loaded
[    0.783775] libphy: Fixed MDIO Bus: probed
[    0.783884] tun: Universal TUN/TAP device driver, 1.6
[    0.783885] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.783926] PPP generic driver version 2.4.2
[    0.783971] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.783976] ehci-pci: EHCI PCI platform driver
[    0.784067] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.784072] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.784086] ehci-pci 0000:00:1a.0: debug port 2
[    0.788004] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.788023] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf252a000
[    0.797237] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.797273] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.797275] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.797277] usb usb1: Product: EHCI Host Controller
[    0.797278] usb usb1: Manufacturer: Linux 3.13.0-39-generic ehci_hcd
[    0.797280] usb usb1: SerialNumber: 0000:00:1a.0
[    0.797382] hub 1-0:1.0: USB hub found
[    0.797388] hub 1-0:1.0: 3 ports detected
[    0.797555] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.797559] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.797571] ehci-pci 0000:00:1d.0: debug port 2
[    0.801463] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.801479] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf2529000
[    0.813240] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.813274] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.813276] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.813278] usb usb2: Product: EHCI Host Controller
[    0.813279] usb usb2: Manufacturer: Linux 3.13.0-39-generic ehci_hcd
[    0.813281] usb usb2: SerialNumber: 0000:00:1d.0
[    0.813374] hub 2-0:1.0: USB hub found
[    0.813380] hub 2-0:1.0: 3 ports detected
[    0.813472] ehci-platform: EHCI generic platform driver
[    0.813480] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.813481] ohci-pci: OHCI PCI platform driver
[    0.813491] ohci-platform: OHCI generic platform driver
[    0.813497] uhci_hcd: USB Universal Host Controller Interface driver
[    0.813561] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    0.816938] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.816942] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.817055] mousedev: PS/2 mouse device common for all mice
[    0.817233] rtc_cmos 00:06: RTC can wake from S4
[    0.817357] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    0.817386] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.817452] device-mapper: uevent: version 1.0.3
[    0.817520] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    0.817536] platform eisa.0: Probing EISA bus 0
[    0.817538] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    0.817541] platform eisa.0: Cannot allocate resource for EISA slot 1
[    0.817543] platform eisa.0: Cannot allocate resource for EISA slot 2
[    0.817545] platform eisa.0: Cannot allocate resource for EISA slot 3
[    0.817547] platform eisa.0: Cannot allocate resource for EISA slot 4
[    0.817549] platform eisa.0: Cannot allocate resource for EISA slot 5
[    0.817551] platform eisa.0: Cannot allocate resource for EISA slot 6
[    0.817552] platform eisa.0: Cannot allocate resource for EISA slot 7
[    0.817554] platform eisa.0: Cannot allocate resource for EISA slot 8
[    0.817556] platform eisa.0: EISA: Detected 0 cards
[    0.817560] cpufreq-nforce2: No nForce2 chipset.
[    0.817564] ledtrig-cpu: registered to indicate activity on CPUs
[    0.817688] TCP: cubic registered
[    0.817771] NET: Registered protocol family 10
[    0.817946] NET: Registered protocol family 17
[    0.817954] Key type dns_resolver registered
[    0.818135] Using IPI No-Shortcut mode
[    0.818226] Loading compiled-in X.509 certificates
[    0.821430] Loaded X.509 cert 'Magrathea: Glacier signing key: a69631ee8432bd22004ba4daa978cfd92cd55e69'
[    0.821440] registered taskstats version 1
[    0.823047] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.823514] Key type trusted registered
[    0.825131] Key type encrypted registered
[    0.826760] AppArmor: AppArmor sha1 policy hashing enabled
[    0.837273] tpm_tis 00:09: A TPM error (6) occurred attempting to read a pcr value
[    0.837275] IMA: No TPM chip found, activating TPM-bypass!
[    0.837590] regulator-dummy: disabling
[    0.837624]   Magic number: 6:965:634
[    0.837696] rtc_cmos 00:06: setting system clock to 2014-11-13 13:37:43 UTC (1415885863)
[    0.843394] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.843395] EDD information not available.
[    0.843452] PM: Hibernation image not present or could not be loaded.
[    1.033259] isapnp: No Plug & Play device found
[    1.033557] Freeing unused kernel memory: 872K (c19b9000 - c1a93000)
[    1.033623] Write protecting the kernel text: 6544k
[    1.033708] Write protecting the kernel read-only data: 2768k
[    1.033709] NX-protecting the kernel data: 5744k
[    1.044331] systemd-udevd[106]: starting version 204
[    1.066241] pps_core: LinuxPPS API ver. 1 registered
[    1.066244] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.068444] sdhci: Secure Digital Host Controller Interface driver
[    1.068447] sdhci: Copyright(c) Pierre Ossman
[    1.071227] PTP clock support registered
[    1.073950] ahci 0000:00:1f.2: version 3.0
[    1.073955] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e822] (rev 8)
[    1.074155] sdhci-pci 0000:0d:00.0: dummy supplies not allowed
[    1.074156] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[    1.074159] mmc0: no vqmmc regulator found
[    1.074161] sdhci-pci 0000:0d:00.0: dummy supplies not allowed
[    1.074163] mmc0: no vmmc regulator found
[    1.074246] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.074281] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
[    1.083089] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.083092] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.089312] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode
[    1.089318] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[    1.109389] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.117975] scsi0 : ahci
[    1.118079] scsi1 : ahci
[    1.118151] scsi2 : ahci
[    1.118229] scsi3 : ahci
[    1.118309] scsi4 : ahci
[    1.118378] scsi5 : ahci
[    1.118422] ata1: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528100 irq 40
[    1.118425] ata2: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528180 irq 40
[    1.118427] ata3: DUMMY
[    1.118430] ata4: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528280 irq 40
[    1.118432] ata5: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528300 irq 40
[    1.118433] ata6: DUMMY
[    1.118611] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.118631] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[    1.241937] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.241949] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.242346] hub 1-1:1.0: USB hub found
[    1.242455] hub 1-1:1.0: 6 ports detected
[    1.317323] e1000e 0000:00:19.0 eth0: registered PHC clock
[    1.317327] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:21:cc:c0:fc:96
[    1.317329] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    1.317380] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[    1.353364] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.437452] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.465367] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    1.465381] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.465390] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.466473] ata1.00: ATA-8: HITACHI HTS727550A9E364, JF3ZD0H0, max UDMA/100
[    1.466483] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.467759] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    1.467771] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.467778] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.468811] ata1.00: configured for UDMA/100
[    1.469123] scsi 0:0:0:0: Direct-Access     ATA      HITACHI HTS72755 JF3Z PQ: 0 ANSI: 5
[    1.469265] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.469267] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.469297] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.469303] sd 0:0:0:0: [sda] Write Protect is off
[    1.469305] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.469319] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.486223] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.486234] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.486615] hub 2-1:1.0: USB hub found
[    1.486686] hub 2-1:1.0: 8 ports detected
[    1.527293]  sda: sda1 sda2 < sda5 >
[    1.527903] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.561708] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[    1.589400] tsc: Refined TSC clocksource calibration: 2491.905 MHz
[    1.655512] usb 1-1.1: New USB device found, idVendor=12d1, idProduct=14db
[    1.655516] usb 1-1.1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    1.655518] usb 1-1.1: Product: HUAWEI HiLink
[    1.655520] usb 1-1.1: Manufacturer: HUAWEI
[    1.725741] usb 1-1.6: new high-speed USB device number 4 using ehci-pci
[    1.789498] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.794600] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[    1.796318] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[    1.796330] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.800312] ata2.00: ATAPI: HL-DT-ST DVDRAM GT50N, LT20, max UDMA/33
[    1.807469] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[    1.809060] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[    1.809073] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.812933] ata2.00: configured for UDMA/33
[    1.817527] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GT50N     LT20 PQ: 0 ANSI: 5
[    1.823918] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.823922] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.824116] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.824205] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.824649] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b221
[    1.824652] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.824654] usb 1-1.6: Product: Integrated Camera
[    1.824656] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[    1.897701] usb 2-1.2: new low-speed USB device number 3 using ehci-pci
[    1.995506] usb 2-1.2: New USB device found, idVendor=17ef, idProduct=6025
[    1.995517] usb 2-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    1.995524] usb 2-1.2: Product: ThinkPad USB Travel Mouse
[    2.001692] hidraw: raw HID events driver (C) Jiri Kosina
[    2.008337] usbcore: registered new interface driver usbhid
[    2.008339] usbhid: USB HID core driver
[    2.011560] input: ThinkPad USB Travel Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input6
[    2.011716] hid-generic 0003:17EF:6025.0001: input,hidraw0: USB HID v11.10 Mouse [ThinkPad USB Travel Mouse] on usb-0000:00:1d.0-1.2/input0
[    2.048815] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000, board id: 71, fw id: 578367
[    2.048835] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[    2.100558] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[    2.141568] ata4: SATA link down (SStatus 0 SControl 300)
[    2.461626] ata5: SATA link down (SStatus 0 SControl 300)
[    2.589711] Switched to clocksource tsc
[    2.797677] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    3.319500] random: init urandom read with 110 bits of entropy available
[    3.643859] random: nonblocking pool is initialized
[    3.811427] init: plymouth-upstart-bridge main process (176) terminated with status 1
[    3.811437] init: plymouth-upstart-bridge main process ended, respawning
[    3.813686] init: plymouth-upstart-bridge main process (187) terminated with status 1
[    3.813698] init: plymouth-upstart-bridge main process ended, respawning
[    3.815427] init: plymouth-upstart-bridge main process (189) terminated with status 1
[    3.815437] init: plymouth-upstart-bridge main process ended, respawning
[    3.817426] init: plymouth-upstart-bridge main process (190) terminated with status 1
[    3.817434] init: plymouth-upstart-bridge main process ended, respawning
[    3.819028] init: plymouth-upstart-bridge main process (192) terminated with status 1
[    3.819041] init: plymouth-upstart-bridge main process ended, respawning
[    3.821237] init: plymouth-upstart-bridge main process (193) terminated with status 1
[    3.821257] init: plymouth-upstart-bridge main process ended, respawning
[    3.822951] init: plymouth-upstart-bridge main process (195) terminated with status 1
[    3.822962] init: plymouth-upstart-bridge main process ended, respawning
[    3.824914] init: plymouth-upstart-bridge main process (196) terminated with status 1
[    3.824922] init: plymouth-upstart-bridge main process ended, respawning
[    3.826480] init: plymouth-upstart-bridge main process (198) terminated with status 1
[    3.826491] init: plymouth-upstart-bridge main process ended, respawning
[    3.828766] init: plymouth-upstart-bridge main process (199) terminated with status 1
[    3.828780] init: plymouth-upstart-bridge main process ended, respawning
[    3.830593] init: plymouth-upstart-bridge main process (201) terminated with status 1
[    3.830605] init: plymouth-upstart-bridge respawning too fast, stopped
[    5.780922] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[    7.432769] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    7.709990] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7
[   12.273499] Adding 4072444k swap on /dev/sda5.  Priority:-1 extents:1 across:4072444k FS
[   12.339610] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   12.400568] systemd-udevd[317]: starting version 204
[   12.484866] wmi: Mapper loaded
[   12.517181] [drm] Initialized drm 1.1.0 20060810
[   12.524149] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20131115/utaddress-251)
[   12.524156] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.524160] ACPI Warning: 0x00000540-0x0000054f SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20131115/utaddress-251)
[   12.524164] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.524166] ACPI Warning: 0x00000530-0x0000053f SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20131115/utaddress-251)
[   12.524169] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.524171] ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20131115/utaddress-251)
[   12.524174] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.524176] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   12.566591] cfg80211: Calling CRDA to update world regulatory domain
[   12.566929] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
[   12.575231] lp: driver loaded but no devices found
[   12.581455] [drm] Memory usable by graphics device = 2048M
[   12.581460] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[   12.581462] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[   12.581478] Console: switching to colour dummy device 80x25
[   12.603264] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[   12.603274] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   12.603276] [drm] Driver supports precise vblank timestamp query.
[   12.603351] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   12.641000] kvm: disabled by bios
[   12.643945] type=1400 audit(1415885875.302:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=366 comm="apparmor_parser"
[   12.643952] type=1400 audit(1415885875.302:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=366 comm="apparmor_parser"
[   12.643957] type=1400 audit(1415885875.302:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=366 comm="apparmor_parser"
[   12.644525] type=1400 audit(1415885875.302:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=366 comm="apparmor_parser"
[   12.644533] type=1400 audit(1415885875.302:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=366 comm="apparmor_parser"
[   12.644830] type=1400 audit(1415885875.302:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=366 comm="apparmor_parser"
[   12.655337] rtl8192ce: Using firmware rtlwifi/rtl8192cfw.bin
[   12.666862] [drm] Wrong MCH_SSKPD value: 0x16040307
[   12.666865] [drm] This can cause pipe underruns and display issues.
[   12.666867] [drm] Please upgrade your BIOS to fix this.
[   12.695578] kvm: disabled by bios
[   12.730643] usbcore: registered new interface driver usbserial
[   12.730663] usbcore: registered new interface driver usbserial_generic
[   12.730679] usbserial: USB Serial support registered for generic
[   12.736432] Non-volatile memory driver v1.3
[   12.744504] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
[   12.746060] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[   12.746063] thinkpad_acpi: http://ibm-acpi.sf.net/
[   12.746064] thinkpad_acpi: ThinkPad BIOS 83ET67WW (1.37 ), EC unknown
[   12.746065] thinkpad_acpi: Lenovo ThinkPad T420, model 4180JR7
[   12.753200] thinkpad_acpi: detected a 16-level brightness capable ThinkPad
[   12.753319] thinkpad_acpi: radio switch found; radios are disabled
[   12.753393] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[   12.753394] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[   12.755450] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked
[   12.756684] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[   12.756791] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[   12.758322] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8
[   12.762812] fbcon: inteldrmfb (fb0) is primary device
[   12.763736] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[   12.764014] rtlwifi: wireless switch is on
[   12.768490] ppdev: user-space parallel port driver
[   12.851659] Linux video capture interface: v2.00
[   12.866259] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b221)
[   12.867906] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input9
[   12.867980] usbcore: registered new interface driver uvcvideo
[   12.867981] USB Video Class driver (1.1.1)
[   12.926097] cfg80211: World regulatory domain updated:
[   12.926098] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   12.926100] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.926100] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.926101] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.926102] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.926102] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.007472] cdc_ether 1-1.1:1.0 eth1: register 'cdc_ether' at usb-0000:00:1a.0-1.1, CDC Ethernet Device, 58:2c:80:13:92:63
[   13.007493] usbcore: registered new interface driver cdc_ether
[   13.591632] Console: switching to colour frame buffer device 170x48
[   13.594360] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   13.594362] i915 0000:00:02.0: registered panic notifier
[   13.647947] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[   13.668580] acpi device:01: registered as cooling_device5
[   13.668655] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input10
[   13.668760] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   13.668924] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   13.687679] hda_codec: CX20590: BIOS auto-probing.
[   13.688102] autoconfig: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[   13.688105]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   13.688107]    hp_outs=2 (0x1c/0x19/0x0/0x0/0x0)
[   13.688108]    mono: mono_out=0x0
[   13.688109]    inputs:
[   13.688111]      Mic=0x1b
[   13.688112]      Internal Mic=0x23
[   13.688114]      Dock Mic=0x1a
[   13.689160] hda_codec: Enable sync_write for stable communication
[   13.701168] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[   13.701315] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   13.701458] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   13.701597] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   13.701724] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   13.701796] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   13.701870] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   13.724440] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   13.807714] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   13.994656] init: failsafe main process (716) killed by TERM signal
[   14.301221] type=1400 audit(1415885876.958:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=805 comm="apparmor_parser"
[   14.301229] type=1400 audit(1415885876.958:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=805 comm="apparmor_parser"
[   14.301632] type=1400 audit(1415885876.958:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=805 comm="apparmor_parser"
[   14.743823] init: cups main process (806) killed by HUP signal
[   14.743837] init: cups main process ended, respawning
[   14.762566] Bluetooth: Core ver 2.17
[   14.762588] NET: Registered protocol family 31
[   14.762590] Bluetooth: HCI device and connection manager initialized
[   14.762597] Bluetooth: HCI socket layer initialized
[   14.762601] Bluetooth: L2CAP socket layer initialized
[   14.762606] Bluetooth: SCO socket layer initialized
[   14.768305] Bluetooth: RFCOMM TTY layer initialized
[   14.768312] Bluetooth: RFCOMM socket layer initialized
[   14.768316] Bluetooth: RFCOMM ver 1.11
[   14.799529] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   14.799532] Bluetooth: BNEP filters: protocol multicast
[   14.799539] Bluetooth: BNEP socket layer initialized
[   15.400853] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[   15.503913] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[   15.504178] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.504606] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.508872] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   15.782155] init: samba-ad-dc main process (865) terminated with status 1
[   15.962400] type=1400 audit(1415885878.618:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=913 comm="apparmor_parser"
[   17.028184] vboxdrv: module verification failed: signature and/or  required key missing - tainting kernel
[   17.030652] vboxdrv: Found 4 processor cores.
[   17.030933] vboxdrv: fAsync=0 offMin=0xe3 offMax=0xa86
[   17.031019] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   17.031021] vboxdrv: Successfully loaded version 4.3.10_Ubuntu (interface 0x001a0007).
[   17.045268] vboxpci: IOMMU not found (not registered)
[   44.366746] audit_printk_skb: 150 callbacks suppressed
[   44.366750] type=1400 audit(1415885907.018:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2195 comm="apparmor_parser"
[   44.366756] type=1400 audit(1415885907.018:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2195 comm="apparmor_parser"
[   44.367163] type=1400 audit(1415885907.018:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2195 comm="apparmor_parser"
[  210.277903] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[  210.380869] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[  210.381347] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  260.279031] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[  260.279043] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
[  260.279088] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
a@abc:~$ dmesg | tail
[   44.366746] audit_printk_skb: 150 callbacks suppressed
[   44.366750] type=1400 audit(1415885907.018:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2195 comm="apparmor_parser"
[   44.366756] type=1400 audit(1415885907.018:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2195 comm="apparmor_parser"
[   44.367163] type=1400 audit(1415885907.018:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2195 comm="apparmor_parser"
[  210.277903] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[  210.380869] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[  210.381347] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  260.279031] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[  260.279043] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
[  260.279088] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
♥ Kız tavlamak için kahraman olmak gerekmez. Doğru kadın zaten sizi kahraman yapar ;)

heartsmagic

sudo ifconfig wlan0 up
dediğinde ne diyor?
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?


Böylece yalan, dünyanın düzenine dönüştürülüyor.

ahmet_matematikci

a@abc:~$ sudo ifconfig wlan0 up
SIOCSIFFLAGS: Operation not possible due to RF-kill
♥ Kız tavlamak için kahraman olmak gerekmez. Doğru kadın zaten sizi kahraman yapar ;)

heartsmagic

Bu makinede normal şartlarda bir de kablosuz kart var ve donanımsal olarak kapalı değil mi? wlan0 dediği o olsa gerek bu durumda, kısacası oraya takılmayalım.
Şimdi, normalde Vınn'ı takınca olması gerekenler olmuyor mu sistemde?
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?


Böylece yalan, dünyanın düzenine dönüştürülüyor.

ahmet_matematikci

ubuntu içinde ki sanal windows da  giriyor ancak ubuntu da girmiyor sitelere
♥ Kız tavlamak için kahraman olmak gerekmez. Doğru kadın zaten sizi kahraman yapar ;)

ekremsenturk

Aynı cihaz bende var (benimki normal, kısıtlaması yok) Bazen ısınma sorunu çıkarıyor olmakla birlikte, denediğim her Linux dağıtımında düzgün çalışıyor. Bazen ısınma yapıyor ve kapatıp soğumasını bekliyorum. Çalışmayacağı zaman Işık Türkiz (Kurbağa yeşili) yanıyor ve bir süre sonra ısınma başlıyor. Bir kaç kez yeniden başlatıp, ışığın yaprak yeşili yanmasını bekleyebilirsin. Veya bağlantı yokken Firefox'u aç, ve kendi web sayfasına ve ayarlar bölümüne bağlanmasını bekle. O bağlantı esnasında bir süre sonra İnternet'e de bağlanıyor. Güncellemelere bak ve varsa daha yeni bir sürücü sürümü, güncelle.


!! Hiç çalışmıyorsa, dosya yöneticisi ile hafızasını aç ve orada göreceğin dosyalar arasından Linux için olan uygulamayı (sürücüyü) bir kereliğine çalıştır. Ardından sistemini yeniden başlat.

heartsmagic

@ahmet_matematikci, sitelere mi girmiyor? Yani IP alıyor mu, görüyor musun bunu?

ifconfig
ping 173.194.44.128
ping google.com

ne diyor bağlandığında?
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?


Böylece yalan, dünyanın düzenine dönüştürülüyor.

ahmet_matematikci

a@abc:~$ ifconfig
eth0      Link encap:Ethernet  HWaddr 00:21:cc:c0:fc:96 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:471094 errors:0 dropped:0 overruns:0 frame:0
          TX packets:323174 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:631804389 (631.8 MB)  TX bytes:32216334 (32.2 MB)
          Interrupt:20 Hafıza:f2500000-f2520000

eth1      Link encap:Ethernet  HWaddr 58:2c:80:13:92:63 
          inet6 addr: fe80::5a2c:80ff:fe13:9263/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:12 errors:0 dropped:0 overruns:0 frame:0
          TX packets:21 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:3821 (3.8 KB)  TX bytes:3643 (3.6 KB)

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Sunucu
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:5507 errors:0 dropped:0 overruns:0 frame:0
          TX packets:5507 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:750647 (750.6 KB)  TX bytes:750647 (750.6 KB)

a@abc:~$ ping 173.194.44.128
connect: Network is unreachable
a@abc:~$ ping google.com
ping: unknown host google.com
a@abc:~$
♥ Kız tavlamak için kahraman olmak gerekmez. Doğru kadın zaten sizi kahraman yapar ;)

if

@ahmet_matematikci, 192.168.1.1 ile aygıt arayüzüne ulaşabiliyor musunuz? Herhangi bir ek işlem yapmadan başlanabilmesi gerekmiş[1] aslında. Diskler uygulamasında Huawei adında bir şey görünüyor mu?

[1] http://www.draisberghof.de/usb_modeswitch/bb/viewtopic.php?f=4&t=1945

ahmet_matematikci

♥ Kız tavlamak için kahraman olmak gerekmez. Doğru kadın zaten sizi kahraman yapar ;)

if

O arayüzden herhangi bir ayarlama yaptınız mı @ahmet_matematikci?

ahmet_matematikci

o ara  yüz de ayarlamalara baktım. ubuntu içinde ki  Sanal bilgisayarda otomatik çalışırken ubuntu da çalışmaması garip
♥ Kız tavlamak için kahraman olmak gerekmez. Doğru kadın zaten sizi kahraman yapar ;)

ekremsenturk

Kısıtlandırılmış bir cihaz olduğuna göre, kısıtlamaların aşılamasını engellemek için Linux ve Mac sürücüleri kaldırılmış olabilir. Şirketin bir bilgi işlem sorumlusu varsa, o kişiye sorsan bunun nedenini.

heartsmagic

Windows için özel bir şey yapıyor mu bu aygıt?
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?


Böylece yalan, dünyanın düzenine dönüştürülüyor.

ahmet_matematikci

windows için özel bir şey yapmıyor gibi.. :( :(
♥ Kız tavlamak için kahraman olmak gerekmez. Doğru kadın zaten sizi kahraman yapar ;)

gokhanyildiz

Eskinden vınn da pin kodu olunca problem oluyordu ubuntuda. Windows tarafında pin kodu kullanıyorsanız bir de pin kodunu kaldırarak deneyin.

ahmet_matematikci

evet hocam pin kodunu kaldırarak denedim ancak kısıtlama anladığım kadarı ile windows dışı sistemlerde çalışmama üzerine
♥ Kız tavlamak için kahraman olmak gerekmez. Doğru kadın zaten sizi kahraman yapar ;)

heartsmagic

Nasıl bir şey yapılmış ki bu Vınn'a? Bunu sorabileceğin bir kişi varsa en azından durumu öğrenmiş oluruz. Çözebiliyorsak ondan sonra çözmeye çalışırız.
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?


Böylece yalan, dünyanın düzenine dönüştürülüyor.

ahmet_matematikci

Hocam bizim web tabanlı sistem sadece windows işletim sistemlerinde açılıyormuş.
♥ Kız tavlamak için kahraman olmak gerekmez. Doğru kadın zaten sizi kahraman yapar ;)

heartsmagic

Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?


Böylece yalan, dünyanın düzenine dönüştürülüyor.