[Çözüldü] Wi-Fi Etkinleşmiyor

Başlatan dalyaro, 08 Aralık 2014 - 14:57:37

« önceki - sonraki »

0 Üyeler ve 1 Ziyaretçi konuyu incelemekte.

dalyaro

Merhaba bilgisayarımda(asus x550vc) uzun süredir ubuntu var fakat kullanamıyorum wifi bir türlü etkinleşmiyor windowsta başlattığımda ise herhangibir sorun yok çıldıracağım artık denemediğim yol kalmadı 3 tane harici wirelless denedim yine olmadı kablolu şekilde bağlanıyor fakat Wi-Fi ne uçbirim üzerinden nede Wi-Fi etkinleştir düğmesinden etkinleşmiyor.
Çıktıları alırken telefonumun internetini kablo ile paylaşıyordum.
Ekran görüntüleri şu şekilde:

http://imgim.com/ekrang%C3%B6r%C3%BCnt%C3%BCs%C3%BC2014-12-0814:46:59.png
http://imgim.com/ekrang%C3%B6r%C3%BCnt%C3%BCs%C3%BC2014-12-0814:51:48.png (burada kablosuzun yanındaki kapalı yazan yeri açık yaptığım an tekrar kapalı hale geliyor bi saniye bile sürmeden)

cat /etc/lsb-release

DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=14.10
DISTRIB_CODENAME=utopic
DISTRIB_DESCRIPTION="Ubuntu 14.10"


uname -a

Linux bahadir-ubuntu 3.16.0-25-generic #33-Ubuntu SMP Tue Nov 4 12:06:54 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux


lspci

00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1c.3 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04)
00:1f.2 IDE interface: Intel Corporation 7 Series Chipset Family 4-port SATA Controller [IDE mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
00:1f.5 IDE interface: Intel Corporation 7 Series Chipset Family 2-port SATA Controller [IDE mode] (rev 04)
01:00.0 3D controller: NVIDIA Corporation GF117M [GeForce 610M/710M/820M / GT 620M/625M/630M/720M] (rev a1)
03:00.0 Network controller: Qualcomm Atheros AR9485 Wireless Network Adapter (rev 01)
04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5289 (rev 01)
04:00.2 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0a)


lsusb

Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 04f2:b40a Chicony Electronics Co., Ltd
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 002: ID 046d:c52f Logitech, Inc. Unifying Receiver
Bus 003 Device 005: ID 04e8:6863 Samsung Electronics Co., Ltd
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


rfkill list

0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: yes
1: asus-wlan: Wireless LAN
Soft blocked: no
Hard blocked: no
2: asus-bluetooth: Bluetooth
Soft blocked: yes
Hard blocked: no


sudo lshw -C network

  *-network ETKİSİZLEŞTİRİLDİ
       açıklama: Kablosuz arayüz
       ürün: AR9485 Wireless Network Adapter
       üretici: Qualcomm Atheros
       physical id: 0
       bus info: pci@0000:03:00.0
       mantıksal ad: wlan0
       sürüm: 01
       serial: 24:0a:64:56:4c:dd
       genişlik: 64 bits
       saat: 33MHz
       kapasiteler: pm msi pciexpress bus_master cap_list rom eternet physical wireless
       yapılandırma: broadcast=yes driver=ath9k driverversion=3.16.0-25-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn
       kaynaklar: irq:17 bellek:f7900000-f797ffff bellek:f7980000-f798ffff
  *-network
       açıklama: Eternet interface
       ürün: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
       üretici: Realtek Semiconductor Co., Ltd.
       physical id: 0.2
       bus info: pci@0000:04:00.2
       mantıksal ad: eth0
       sürüm: 0a
       serial: ac:22:0b:b8:43:1d
       boyut: 10Mbit/s
       kapasite: 1Gbit/s
       genişlik: 64 bits
       saat: 33MHz
       kapasiteler: pm msi pciexpress msix vpd bus_master cap_list eternet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
       yapılandırma: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl8411-1_0.0.3 06/18/12 latency=0 link=no multicast=yes port=MII speed=10Mbit/s
       kaynaklar: irq:42 ioport:d000(boyut=256) bellek:f2104000-f2104fff bellek:f2100000-f2103fff
  *-network
       açıklama: Eternet interface
       physical id: 1
       mantıksal ad: usb0
       serial: 02:04:64:33:63:6c
       kapasiteler: eternet physical
       yapılandırma: broadcast=yes driver=rndis_host driverversion=22-Aug-2005 firmware=RNDIS device ip=192.168.42.97 link=yes multicast=yes


ifconfig

eth0      Link encap:Ethernet  HWaddr ac:22:0b:b8:43:1d 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Sunucu
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:1115 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1115 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:130727 (130.7 KB)  TX bytes:130727 (130.7 KB)

usb0      Link encap:Ethernet  HWaddr 02:04:64:33:63:6c 
          inet addr:192.168.42.97  Bcast:192.168.42.255  Mask:255.255.255.0
          inet6 addr: fe80::4:64ff:fe33:636c/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:8545 errors:0 dropped:0 overruns:0 frame:0
          TX packets:7655 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:7938182 (7.9 MB)  TX bytes:1584683 (1.5 MB)


iwconfig

eth0      no wireless extensions.

wlan0     IEEE 802.11bgn  ESSID:off/any 
          Mode:Managed  Access Point: Not-Associated   Tx-Power=off   
          Retry short limit:7   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off
         
usb0      no wireless extensions.

lo        no wireless extensions.


iwlist scanning

eth0      Interface doesn't support scanning.

wlan0     Interface doesn't support scanning : Network is down

usb0      Interface doesn't support scanning.

lo        Interface doesn't support scanning.


lsmod

Module                  Size  Used by
rndis_host             14513  0
cdc_ether              14361  1 rndis_host
usbnet                 43848  2 rndis_host,cdc_ether
bnep                   19543  2
rfcomm                 69509  0
binfmt_misc            17468  1
uvcvideo               81065  0
videobuf2_vmalloc      13216  1 uvcvideo
videobuf2_memops       13362  1 videobuf2_vmalloc
videobuf2_core         59104  1 uvcvideo
v4l2_common            15682  1 videobuf2_core
videodev              149725  3 uvcvideo,v4l2_common,videobuf2_core
media                  21963  2 uvcvideo,videodev
asus_nb_wmi            16990  0
asus_wmi               24094  1 asus_nb_wmi
sparse_keymap          13948  1 asus_wmi
intel_rapl             18783  0
x86_pkg_temp_thermal    14205  0
intel_powerclamp       18786  0
coretemp               13441  0
kvm_intel             143553  0
kvm                   459835  1 kvm_intel
crct10dif_pclmul       14307  0
crc32_pclmul           13133  0
ghash_clmulni_intel    13230  0
aesni_intel           152552  1803
aes_x86_64             17131  1 aesni_intel
lrw                    13287  1 aesni_intel
gf128mul               14951  1 lrw
glue_helper            13944  1 aesni_intel
ablk_helper            13597  1 aesni_intel
snd_hda_codec_hdmi     47547  1
cryptd                 20360  904 ghash_clmulni_intel,aesni_intel,ablk_helper
snd_hda_codec_realtek    76887  1
snd_hda_codec_generic    68914  1 snd_hda_codec_realtek
arc4                   12608  2
joydev                 17344  0
serio_raw              13434  0
ath9k                 136984  0
snd_hda_intel          30379  3
ath9k_common           25638  1 ath9k
snd_hda_controller     35152  1 snd_hda_intel
ath9k_hw              450664  2 ath9k_common,ath9k
snd_hda_codec         139675  5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
snd_hwdep              17698  1 snd_hda_codec
ath                    29052  3 ath9k_common,ath9k,ath9k_hw
snd_pcm               104102  4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller
mac80211              660592  1 ath9k
snd_seq_midi           13564  0
snd_seq_midi_event     14899  1 snd_seq_midi
cfg80211              510218  4 ath,ath9k_common,ath9k,mac80211
rtsx_pci_ms            18168  0
snd_rawmidi            30876  1 snd_seq_midi
memstick               16966  1 rtsx_pci_ms
lpc_ich                21093  0
snd_seq                67224  2 snd_seq_midi_event,snd_seq_midi
ath3k                  13331  0
snd_seq_device         14497  3 snd_seq,snd_rawmidi,snd_seq_midi
btusb                  32448  0
snd_timer              29513  2 snd_pcm,snd_seq
bluetooth             446190  12 bnep,ath3k,btusb,rfcomm
mei_me                 19742  0
snd                    87611  17 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,snd_seq_device
mei                    87931  1 mei_me
6lowpan_iphc           18702  1 bluetooth
soundcore              15052  2 snd,snd_hda_codec
shpchp                 37040  0
mac_hid                13227  0
parport_pc             32741  0
ppdev                  17671  0
lp                     17759  0
parport                42299  3 lp,ppdev,parport_pc
i915                  917658  3
rtsx_pci_sdmmc         23043  0
hid_generic            12559  0
nouveau              1234845  1
mxm_wmi                13021  1 nouveau
i2c_algo_bit           13406  2 i915,nouveau
psmouse               106548  0
ttm                    89406  1 nouveau
rtsx_pci               46258  2 rtsx_pci_ms,rtsx_pci_sdmmc
drm_kms_helper         61627  2 i915,nouveau
usbhid                 52574  0
drm                   310919  8 ttm,i915,drm_kms_helper,nouveau
r8169                  71471  0
pata_acpi              13053  0
hid                   110426  3 hid_generic,usbhid
mii                    13934  2 r8169,usbnet
wmi                    19193  3 mxm_wmi,nouveau,asus_wmi
video                  20128  3 i915,nouveau,asus_wmi


dmesg

[    0.676647] PCI: CLS 64 bytes, default 64
[    0.676697] Trying to unpack rootfs image as initramfs...
[    1.077853] Freeing initrd memory: 28324K (ffff88003489e000 - ffff880036447000)
[    1.077887] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.077889] software IO TLB [mem 0xc5715000-0xc9715000] (64MB) mapped at [ffff8800c5715000-ffff8800c9714fff]
[    1.078134] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    1.078174] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
[    1.078181] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
[    1.078189] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
[    1.078198] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
[    1.078249] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.078270] Scanning for low memory corruption every 60 seconds
[    1.078551] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    1.078572] Initialise system trusted keyring
[    1.078599] audit: initializing netlink subsys (disabled)
[    1.078613] audit: type=2000 audit(1418048168.000:1): initialized
[    1.078968] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.080245] zpool: loaded
[    1.080248] zbud: loaded
[    1.080404] VFS: Disk quotas dquot_6.5.2
[    1.080433] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.080837] fuse init (API version 7.23)
[    1.080910] msgmni has been set to 7672
[    1.080960] Key type big_key registered
[    1.081338] Key type asymmetric registered
[    1.081342] Asymmetric key parser 'x509' registered
[    1.081376] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.081424] io scheduler noop registered
[    1.081428] io scheduler deadline registered (default)
[    1.081470] io scheduler cfq registered
[    1.081644] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    1.082003] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.082016] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.082057] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[    1.082058] vesafb: scrolling: redraw
[    1.082059] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.082073] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90004780000, using 4160k, total 4160k
[    1.082145] Console: switching to colour frame buffer device 170x48
[    1.082160] fb0: VESA VGA frame buffer device
[    1.082180] intel_idle: MWAIT substates: 0x21120
[    1.082181] intel_idle: v0.4 model 0x3A
[    1.082182] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.092866] ACPI: AC Adapter [AC0] (off-line)
[    1.092956] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    1.128892] ACPI: Lid Switch [LID]
[    1.128935] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    1.128939] ACPI: Sleep Button [SLPB]
[    1.128972] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.128974] ACPI: Power Button [PWRF]
[    1.129591] thermal LNXTHERM:00: registered as thermal_zone0
[    1.129593] ACPI: Thermal Zone [THRM] (37 C)
[    1.129623] GHES: HEST is not enabled!
[    1.129729] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.132090] Linux agpgart interface v0.103
[    1.133453] brd: module loaded
[    1.134056] loop: module loaded
[    1.134187] ata_piix 0000:00:1f.2: version 2.13
[    1.134266] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    1.289218] scsi0 : ata_piix
[    1.289433] scsi1 : ata_piix
[    1.289479] ata1: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 19
[    1.289484] ata2: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 19
[    1.289569] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    1.297454] ACPI: Battery Slot [BAT0] (battery present)
[    1.445076] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
[    1.445385] scsi2 : ata_piix
[    1.445541] scsi3 : ata_piix
[    1.445575] ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 19
[    1.445576] ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 19
[    1.445666] libphy: Fixed MDIO Bus: probed
[    1.445670] tun: Universal TUN/TAP device driver, 1.6
[    1.445672] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.445724] PPP generic driver version 2.4.2
[    1.445806] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.445811] ehci-pci: EHCI PCI platform driver
[    1.445911] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.445916] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.445929] ehci-pci 0000:00:1a.0: debug port 2
[    1.449825] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.449842] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7a17000
[    1.461041] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.461080] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.461082] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.461083] usb usb1: Product: EHCI Host Controller
[    1.461085] usb usb1: Manufacturer: Linux 3.16.0-25-generic ehci_hcd
[    1.461086] usb usb1: SerialNumber: 0000:00:1a.0
[    1.461230] hub 1-0:1.0: USB hub found
[    1.461237] hub 1-0:1.0: 2 ports detected
[    1.461411] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.461418] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.461429] ehci-pci 0000:00:1d.0: debug port 2
[    1.465336] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.465349] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7a16000
[    1.477095] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.477134] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.477136] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.477138] usb usb2: Product: EHCI Host Controller
[    1.477139] usb usb2: Manufacturer: Linux 3.16.0-25-generic ehci_hcd
[    1.477141] usb usb2: SerialNumber: 0000:00:1d.0
[    1.477246] hub 2-0:1.0: USB hub found
[    1.477251] hub 2-0:1.0: 2 ports detected
[    1.477331] ehci-platform: EHCI generic platform driver
[    1.477341] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.477345] ohci-pci: OHCI PCI platform driver
[    1.477356] ohci-platform: OHCI generic platform driver
[    1.477364] uhci_hcd: USB Universal Host Controller Interface driver
[    1.477469] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.477474] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.477565] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.477584] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
[    1.477639] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.477640] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.477642] usb usb3: Product: xHCI Host Controller
[    1.477643] usb usb3: Manufacturer: Linux 3.16.0-25-generic xhci_hcd
[    1.477645] usb usb3: SerialNumber: 0000:00:14.0
[    1.477737] hub 3-0:1.0: USB hub found
[    1.477746] hub 3-0:1.0: 4 ports detected
[    1.477840] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.477842] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    1.477871] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.477872] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.477874] usb usb4: Product: xHCI Host Controller
[    1.477875] usb usb4: Manufacturer: Linux 3.16.0-25-generic xhci_hcd
[    1.477877] usb usb4: SerialNumber: 0000:00:14.0
[    1.477964] hub 4-0:1.0: USB hub found
[    1.477974] hub 4-0:1.0: 4 ports detected
[    1.478111] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.479964] i8042: Detected active multiplexing controller, rev 1.1
[    1.480887] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.480890] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.480911] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.480928] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.480946] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.481070] mousedev: PS/2 mouse device common for all mice
[    1.481250] rtc_cmos 00:02: RTC can wake from S4
[    1.481377] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.481405] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.481462] device-mapper: uevent: version 1.0.3
[    1.481523] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    1.481543] Intel P-state driver initializing.
[    1.481578] Intel pstate controlling: cpu 0
[    1.481600] Intel pstate controlling: cpu 1
[    1.481637] Intel pstate controlling: cpu 2
[    1.481649] Intel pstate controlling: cpu 3
[    1.481685] Consider also installing thermald for improved thermal control.
[    1.481688] ledtrig-cpu: registered to indicate activity on CPUs
[    1.481768] TCP: cubic registered
[    1.481847] NET: Registered protocol family 10
[    1.482038] NET: Registered protocol family 17
[    1.482049] Key type dns_resolver registered
[    1.482314] Loading compiled-in X.509 certificates
[    1.483018] Loaded X.509 cert 'Magrathea: Glacier signing key: 5784eb6867a4540d81005486b7553828888a60e0'
[    1.483032] registered taskstats version 1
[    1.484599] Key type trusted registered
[    1.485865] Key type encrypted registered
[    1.487081] AppArmor: AppArmor sha1 policy hashing enabled
[    1.487085] ima: No TPM chip found, activating TPM-bypass!
[    1.487114] evm: HMAC attrs: 0x1
[    1.487537]   Magic number: 10:840:282
[    1.487577] tty tty19: hash matches
[    1.487668] rtc_cmos 00:02: setting system clock to 2014-12-08 14:16:08 UTC (1418048168)
[    1.487741] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.487742] EDD information not available.
[    1.487868] PM: Hibernation image not present or could not be loaded.
[    1.519151] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.773331] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.905726] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.905732] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.906157] hub 1-1:1.0: USB hub found
[    1.906346] hub 1-1:1.0: 6 ports detected
[    2.017474] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    2.077479] tsc: Refined TSC clocksource calibration: 2594.107 MHz
[    2.089570] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
[    2.089586] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 330)
[    2.106000] ata1.00: ATA-8: HGST HTS545050A7E680, GG2OAF10, max UDMA/133
[    2.106006] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.106028] ata1.01: ATAPI: TSSTcorp CDDVDW SU-228CB, AS00, max UDMA/100
[    2.121996] ata1.00: configured for UDMA/133
[    2.137796] ata1.01: configured for UDMA/100
[    2.149884] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    2.149891] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.150191] hub 2-1:1.0: USB hub found
[    2.150378] hub 2-1:1.0: 6 ports detected
[    2.153751] scsi 0:0:0:0: Direct-Access     ATA      HGST HTS545050A7 AF10 PQ: 0 ANSI: 5
[    2.154096] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.154127] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.154131] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.155065] scsi 0:0:1:0: CD-ROM            TSSTcorp CDDVDW SU-228CB  AS00 PQ: 0 ANSI: 5
[    2.166866] sd 0:0:0:0: [sda] Write Protect is off
[    2.166869] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.189750] sr0: scsi3-mmc drive: 8x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.189752] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.189768] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.189861] sr 0:0:1:0: Attached scsi CD-ROM sr0
[    2.189922] sr 0:0:1:0: Attached scsi generic sg1 type 5
[    2.317633] ata2.00: failed to resume link (SControl 30)
[    2.317648] usb 3-3: new full-speed USB device number 2 using xhci_hcd
[    2.448045] usb 3-3: New USB device found, idVendor=046d, idProduct=c52f
[    2.448052] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.448055] usb 3-3: Product: USB Receiver
[    2.448059] usb 3-3: Manufacturer: Logitech
[    2.517896] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[    2.562757]  sda: sda1 sda2 sda3 sda4 < sda5 >
[    2.563847] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.611806] usb 1-1.1: New USB device found, idVendor=13d3, idProduct=3362
[    2.611812] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.611816] usb 1-1.1: Product: Bluetooth USB Host Controller
[    2.611819] usb 1-1.1: Manufacturer: Atheros Communications
[    2.611822] usb 1-1.1: SerialNumber: Alaska Day 2006
[    2.681992] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
[    2.807440] usb 1-1.3: New USB device found, idVendor=04f2, idProduct=b40a
[    2.807447] usb 1-1.3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    2.807450] usb 1-1.3: Product: USB2.0 HD UVC WebCam
[    2.807454] usb 1-1.3: Manufacturer: Chicony Electronics Co.,Ltd.
[    2.807457] usb 1-1.3: SerialNumber: 0x0001
[    3.078315] Switched to clocksource tsc
[    3.346299] ata2.01: failed to resume link (SControl 30)
[    3.357793] ata2.00: SATA link down (SStatus 4 SControl 30)
[    3.357807] ata2.01: SATA link down (SStatus 4 SControl 30)
[    3.358604] Freeing unused kernel memory: 1360K (ffffffff81d2e000 - ffffffff81e82000)
[    3.358606] Write protecting the kernel read-only data: 12288k
[    3.359506] Freeing unused kernel memory: 448K (ffff880001790000 - ffff880001800000)
[    3.360323] Freeing unused kernel memory: 488K (ffff880001b86000 - ffff880001c00000)
[    3.369304] systemd-udevd[133]: starting version 208
[    3.369655] random: systemd-udevd urandom read with 25 bits of entropy available
[    3.382594] wmi: Mapper loaded
[    3.389134] hidraw: raw HID events driver (C) Jiri Kosina
[    3.390648] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    3.390658] r8169 0000:04:00.2: can't disable ASPM; OS doesn't have ASPM control
[    3.391128] r8169 0000:04:00.2: irq 42 for MSI/MSI-X
[    3.391405] r8169 0000:04:00.2 eth0: RTL8411 at 0xffffc9000064e000, ac:22:0b:b8:43:1d, XID 08800880 IRQ 42
[    3.391408] r8169 0000:04:00.2 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    3.391749] [drm] Initialized drm 1.1.0 20060810
[    3.396520] rtsx_pci 0000:04:00.0: irq 43 for MSI/MSI-X
[    3.396535] rtsx_pci 0000:04:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 43
[    3.399433] usbcore: registered new interface driver usbhid
[    3.399435] usbhid: USB HID core driver
[    3.417299] MXM: GUID detected in BIOS
[    3.417347] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000003) is beyond end of object (length 0x0) (20140424/exoparg2-420)
[    3.417352] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0._DSM] (Node ffff88012a431b18), AE_AML_PACKAGE_LIMIT (20140424/psparse-536)
[    3.417360] ACPI: \_SB_.PCI0.GFX0: failed to evaluate _DSM (0x300b)
[    3.417364] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[    3.417418] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[    3.417506] pci 0000:00:02.0: optimus capabilities: enabled, status dynamic power,
[    3.417539] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000003) is beyond end of object (length 0x0) (20140424/exoparg2-420)
[    3.417544] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0._DSM] (Node ffff88012a431b18), AE_AML_PACKAGE_LIMIT (20140424/psparse-536)
[    3.417550] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEG0.PEGP._DSM] (Node ffff88012a449b90), AE_AML_PACKAGE_LIMIT (20140424/psparse-536)
[    3.417558] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM (0x300b)
[    3.417562] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[    3.417643] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[    3.417722] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power,
[    3.417724] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
[    3.417741] checking generic (d0000000 410000) vs hw (e0000000 10000000)
[    3.417743] checking generic (d0000000 410000) vs hw (f0000000 2000000)
[    3.420363] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:046D:C52F.0001/input/input9
[    3.420581] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
[    3.421290] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:046D:C52F.0002/input/input10
[    3.421367] nouveau  [  DEVICE][0000:01:00.0] BOOT0  : 0x0d7000a2
[    3.421370] nouveau  [  DEVICE][0000:01:00.0] Chipset: GF117 (NVD7)
[    3.421372] nouveau  [  DEVICE][0000:01:00.0] Family : NVD0
[    3.421396] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
[    3.421410] nouveau  [   VBIOS][0000:01:00.0] checking PRAMIN for image...
[    3.421414] nouveau  [   VBIOS][0000:01:00.0] ... signature not found
[    3.421416] nouveau  [   VBIOS][0000:01:00.0] checking PROM for image...
[    3.428359] nouveau  [   VBIOS][0000:01:00.0] ... signature not found
[    3.428362] nouveau  [   VBIOS][0000:01:00.0] checking ACPI for image...
[    3.662623] nouveau  [   VBIOS][0000:01:00.0] ... appears to be valid
[    3.662626] nouveau  [   VBIOS][0000:01:00.0] using image from ACPI
[    3.662684] nouveau  [   VBIOS][0000:01:00.0] BIT signature found
[    3.662687] nouveau  [   VBIOS][0000:01:00.0] version 75.17.54.00.0c
[    3.662775] nouveau  [   VBIOS][0000:01:00.0] running init tables
[    3.745158] nouveau 0000:01:00.0: irq 44 for MSI/MSI-X
[    3.745165] nouveau  [     PMC][0000:01:00.0] MSI interrupts enabled
[    3.745198] nouveau W[     PFB][0000:01:00.0][0x00000000][ffff880127791000] reclocking of this ram type unsupported
[    3.745200] nouveau  [     PFB][0000:01:00.0] RAM type: DDR3
[    3.745201] nouveau  [     PFB][0000:01:00.0] RAM size: 2048 MiB
[    3.745202] nouveau  [     PFB][0000:01:00.0]    ZCOMP: 0 tags
[    3.775175] nouveau  [  PTHERM][0000:01:00.0] FAN control: none / external
[    3.775183] nouveau  [  PTHERM][0000:01:00.0] internal sensor: yes
[    3.775211] nouveau  [     CLK][0000:01:00.0] 07: core 270 MHz memory 405 MHz
[    3.775217] nouveau  [     CLK][0000:01:00.0] 0f: core 775 MHz memory 800 MHz
[    3.775366] nouveau  [     CLK][0000:01:00.0] --: core 270 MHz memory 324 MHz
[    3.778600] [TTM] Zone  kernel: Available graphics memory: 1965416 kiB
[    3.778601] [TTM] Initializing pool allocator
[    3.778605] [TTM] Initializing DMA pool allocator
[    3.778614] nouveau  [     DRM] VRAM: 2048 MiB
[    3.778615] nouveau  [     DRM] GART: 1048576 MiB
[    3.778618] nouveau W[     DRM] Pointer to TMDS table invalid
[    3.778620] nouveau  [     DRM] DCB version 4.0
[    3.778621] nouveau W[     DRM] Pointer to flat panel table invalid
[    3.783929] nouveau  [     DRM] MM: using COPY0 for buffer copies
[    3.783935] [drm] Initialized nouveau 1.1.2 20120801 for 0000:01:00.0 on minor 0
[    3.784446] [drm] Memory usable by graphics device = 2048M
[    3.784448] [drm] Replacing VGA console driver
[    3.784451] checking generic (d0000000 410000) vs hw (d0000000 10000000)
[    3.784452] fb: switching to inteldrmfb from VESA VGA
[    3.784469] Console: switching to colour dummy device 80x25
[    3.822620] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[    3.822630] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.822631] [drm] Driver supports precise vblank timestamp query.
[    3.826746] vga_switcheroo: enabled
[    3.826802] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.836623] psmouse serio4: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[    3.863945] fbcon: inteldrmfb (fb0) is primary device
[    3.863967] Console: switching to colour frame buffer device 170x48
[    3.863984] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.863985] i915 0000:00:02.0: registered panic notifier
[    3.866920] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[    3.866967] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input14
[    3.871141] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.878774] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input15
[    3.878845] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 1
[    4.335272] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x361f03)
[    4.349478] psmouse serio4: elantech: Synaptics capabilities query result 0x10, 0x14, 0x0e.
[    4.418863] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input13
[    4.580481] [drm:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch fifo underrun on pch transcoder A
[    4.580488] [drm:cpt_serr_int_handler] *ERROR* PCH transcoder A FIFO underrun
[    4.867316] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[    5.046862] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    5.442033] random: nonblocking pool is initialized
[    7.103965] init: plymouth-upstart-bridge main process (226) killed by TERM signal
[    9.870646] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[    9.870722] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[   15.514986] systemd-udevd[352]: starting version 208
[   15.587319] lp: driver loaded but no devices found
[   15.591584] ppdev: user-space parallel port driver
[   15.636957] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   15.660489] mei_me 0000:00:16.0: irq 46 for MSI/MSI-X
[   15.662951] Bluetooth: Core ver 2.19
[   15.662975] NET: Registered protocol family 31
[   15.662977] Bluetooth: HCI device and connection manager initialized
[   15.662989] Bluetooth: HCI socket layer initialized
[   15.662992] Bluetooth: L2CAP socket layer initialized
[   15.663004] Bluetooth: SCO socket layer initialized
[   15.664811] usbcore: registered new interface driver btusb
[   15.672678] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000044f (\GPIS) (20140424/utaddress-258)
[   15.672684] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140424/utaddress-258)
[   15.672689] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   15.672692] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\GPIO) (20140424/utaddress-258)
[   15.672696] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GP01) (20140424/utaddress-258)
[   15.672699] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   15.672701] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\GPIO) (20140424/utaddress-258)
[   15.672704] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GP01) (20140424/utaddress-258)
[   15.672707] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   15.672709] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\GPIO) (20140424/utaddress-258)
[   15.672712] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GP01) (20140424/utaddress-258)
[   15.672715] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   15.672717] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   15.677028] cfg80211: Calling CRDA to update world regulatory domain
[   15.697955] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[   15.705197] ath: phy0: Disable PLL PowerSave
[   15.713796] ath: EEPROM regdomain: 0x60
[   15.713799] ath: EEPROM indicates we should expect a direct regpair map
[   15.713802] ath: Country alpha2 being used: 00
[   15.713803] ath: Regpair used: 0x60
[   15.717953] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   15.718306] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90018880000, irq=17
[   15.721930] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   15.721934] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   15.721937] sound hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   15.721939] sound hdaudioC0D0:    mono: mono_out=0x0
[   15.721941] sound hdaudioC0D0:    inputs:
[   15.721944] sound hdaudioC0D0:      Mic=0x19
[   15.735061] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   15.735147] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[   15.739395] AVX version of gcm_enc/dec engaged.
[   15.783413] intel_rapl: Found RAPL domain package
[   15.783417] intel_rapl: Found RAPL domain core
[   15.783420] intel_rapl: Found RAPL domain uncore
[   15.939812] asus_wmi: ASUS WMI generic driver loaded
[   15.940872] asus_wmi: Initialization: 0x1
[   15.940913] asus_wmi: BIOS WMI version: 7.9
[   15.940959] asus_wmi: SFUN value: 0x4a0877
[   15.941767] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input18
[   16.036889] asus_wmi: Backlight controlled by ACPI video driver
[   16.451054] usbcore: registered new interface driver ath3k
[   16.489933] cfg80211: World regulatory domain updated:
[   16.489938] cfg80211:  DFS Master region: unset
[   16.489939] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   16.489941] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   16.489942] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   16.489943] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[   16.489944] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   16.489945] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   16.565118] usb 1-1.1: USB disconnect, device number 3
[   16.715591] media: Linux media interface: v0.10
[   16.718609] Linux video capture interface: v2.00
[   16.724591] uvcvideo: Found UVC 1.00 device USB2.0 HD UVC WebCam (04f2:b40a)
[   16.725997] input: USB2.0 HD UVC WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input19
[   16.726069] usbcore: registered new interface driver uvcvideo
[   16.726071] USB Video Class driver (1.1.1)
[   16.911299] audit: type=1400 audit(1418040983.909:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=510 comm="apparmor_parser"
[   16.911304] audit: type=1400 audit(1418040983.909:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=510 comm="apparmor_parser"
[   16.911308] audit: type=1400 audit(1418040983.909:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=510 comm="apparmor_parser"
[   16.911344] audit: type=1400 audit(1418040983.909:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=509 comm="apparmor_parser"
[   16.911352] audit: type=1400 audit(1418040983.909:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=509 comm="apparmor_parser"
[   16.911358] audit: type=1400 audit(1418040983.909:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=509 comm="apparmor_parser"
[   16.912824] audit: type=1400 audit(1418040983.909:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=511 comm="apparmor_parser"
[   16.912834] audit: type=1400 audit(1418040983.909:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=511 comm="apparmor_parser"
[   16.912839] audit: type=1400 audit(1418040983.909:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=511 comm="apparmor_parser"
[   17.074113] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   18.127501] init: Error while reading from descriptor: Broken pipe
[   18.128961] init: failsafe main process (660) killed by TERM signal
[   19.003438] audit: type=1400 audit(1418040986.001:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=783 comm="apparmor_parser"
[   19.772578] init: cups main process (805) killed by HUP signal
[   19.772586] init: cups main process ended, respawning
[   19.993163] Bluetooth: RFCOMM TTY layer initialized
[   19.993174] Bluetooth: RFCOMM socket layer initialized
[   19.993178] Bluetooth: RFCOMM ver 1.11
[   20.099028] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   20.099031] Bluetooth: BNEP filters: protocol multicast
[   20.099037] Bluetooth: BNEP socket layer initialized
[   21.299934] systemd-logind[1061]: New seat seat0.
[   21.384671] systemd-logind[1061]: Watching system buttons on /dev/input/event2 (Power Button)
[   21.384762] systemd-logind[1061]: Watching system buttons on /dev/input/event7 (Video Bus)
[   21.384835] systemd-logind[1061]: Watching system buttons on /dev/input/event6 (Video Bus)
[   21.384906] systemd-logind[1061]: Watching system buttons on /dev/input/event0 (Lid Switch)
[   21.384981] systemd-logind[1061]: Watching system buttons on /dev/input/event1 (Sleep Button)
[   21.910508] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[   21.910598] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[   22.009530] r8169 0000:04:00.2 eth0: link down
[   22.009580] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   28.204765] systemd-logind[1061]: Failed to start unit user@112.service: Unknown unit: user@112.service
[   28.204771] systemd-logind[1061]: Failed to start user service: Unknown unit: user@112.service
[   28.207680] systemd-logind[1061]: New session c1 of user lightdm.
[   28.207695] systemd-logind[1061]: Linked /tmp/.X11-unix/X0 to /run/user/112/X11-display.
[   33.093804] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[   33.093885] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[   33.221888] init: anacron main process (1127) killed by TERM signal
[   42.937943] systemd-logind[1061]: Failed to start unit user@1000.service: Unknown unit: user@1000.service
[   42.937961] systemd-logind[1061]: Failed to start user service: Unknown unit: user@1000.service
[   42.940872] systemd-logind[1061]: New session c2 of user bahadir.
[   42.940888] systemd-logind[1061]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display.
[   49.854351] audit_printk_skb: 72 callbacks suppressed
[   49.854353] audit: type=1400 audit(1418041016.829:36): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2280 comm="apparmor_parser"
[   49.854360] audit: type=1400 audit(1418041016.829:37): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2280 comm="apparmor_parser"
[   49.868886] audit: type=1400 audit(1418041016.845:38): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="third_party" pid=2280 comm="apparmor_parser"
[   63.066421] systemd-hostnamed[2390]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[  128.476509] usb 3-1: new high-speed USB device number 3 using xhci_hcd
[  128.606071] usb 3-1: New USB device found, idVendor=04e8, idProduct=6860
[  128.606079] usb 3-1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[  128.606083] usb 3-1: Product: GT-N7100
[  128.606086] usb 3-1: Manufacturer: samsung
[  128.606090] usb 3-1: SerialNumber: 4df107444d04af87
[  153.635645] usb 3-1: USB disconnect, device number 3
[  174.874951] usb 3-1: new high-speed USB device number 4 using xhci_hcd
[  175.004468] usb 3-1: New USB device found, idVendor=04e8, idProduct=6860
[  175.004476] usb 3-1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[  175.004480] usb 3-1: Product: GT-N7100
[  175.004483] usb 3-1: Manufacturer: samsung
[  175.004487] usb 3-1: SerialNumber: 4df107444d04af87
[  194.783593] usb 3-1: USB disconnect, device number 4
[  195.092227] usb 3-1: new high-speed USB device number 5 using xhci_hcd
[  195.221243] usb 3-1: New USB device found, idVendor=04e8, idProduct=6863
[  195.221251] usb 3-1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[  195.221255] usb 3-1: Product: GT-N7100
[  195.221258] usb 3-1: Manufacturer: samsung
[  195.221261] usb 3-1: SerialNumber: 4df107444d04af87
[  195.237911] usbcore: registered new interface driver cdc_ether
[  195.243047] rndis_host 3-1:1.0 usb0: register 'rndis_host' at usb-0000:00:14.0-1, RNDIS device, 02:04:64:33:63:6c
[  195.243101] usbcore: registered new interface driver rndis_host
[ 1205.132455] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 1205.132649] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 1205.133327] nouveau E[    PBUS][0000:01:00.0] MMIO write of 0x0000001f FAULT at 0x6013d4 [ !ENGINE ]
[ 1220.102269] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 1220.102447] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 1251.967178] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 1251.967356] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 1465.099052] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 1465.099241] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)


dmesg | tail

[  195.243101] usbcore: registered new interface driver rndis_host
[ 1205.132455] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 1205.132649] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 1205.133327] nouveau E[    PBUS][0000:01:00.0] MMIO write of 0x0000001f FAULT at 0x6013d4 [ !ENGINE ]
[ 1220.102269] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 1220.102447] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 1251.967178] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 1251.967356] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 1465.099052] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 1465.099241] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)


Şimdiden Teşekkürler Lütfen Şu Sorunu Çözmeme Yardımcı Olun   :(

kodadiirem

sudo ifconfig wlan0 up komutunu denediniz mi?
Lütfen Türkçemizi doğru kullanalım.

meda

BİOS ayarlarınızı default yaparak deneme yapın olmazsa. BİOS güncellemeyi deneyebilirsiniz. Hatta 3.18 çekirdek ile deneme yapabilirsiniz. 
http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.18-vivid/
"BEDAVA Bedava yaşıyoruz, bedava;Hava bedava, bulut bedava;
Dere tepe bedava;Yağmur çamur bedava;Otomobillerin dışı,Sinemaların kapısı,Camekanlar bedava; Peynir ekmek değil ama Acı su bedava;Kelle fiyatına hürriyet, Esirlik bedava; Bedava yaşıyoruz, bedava. Orhan VELİ"

dalyaro

#3
Alıntı yapılan: kodadiirem - 08 Aralık 2014 - 16:03:18
sudo ifconfig wlan0 up komutunu denediniz mi?

Şu yanıtı alıyorum

SIOCSIFFLAGS: Operation not possible due to RF-kill



Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 08 Aralık 2014 - 17:23:52

Alıntı yapılan: meda - 08 Aralık 2014 - 16:43:01
BİOS ayarlarınızı default yaparak deneme yapın olmazsa. BİOS güncellemeyi deneyebilirsiniz. Hatta 3.18 çekirdek ile deneme yapabilirsiniz. 
http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.18-vivid/

BIOS ayarlarını default yaptım ancak hala devam ediyor
BIOS veya Çekirdek güncellemek gözümü korkutmuyor değil  :-\ 

kodadiirem

Burada[1] da benzer bir problemden bahsedilmiş. meda'nın da değindiği üzere bios ayarlarınıza bakmanızın yararı olabilir. "Onboard WLAN Disabled" gibi bir ayar var ise "Enabled" yaparak düzeltilebilir.

[1]: http://askubuntu.com/questions/508143/operation-not-possible-due-to-rf-kill-phy0-hard-blocked
Lütfen Türkçemizi doğru kullanalım.

dalyaro

#5
Alıntı yapılan: kodadiirem - 08 Aralık 2014 - 17:30:15
Burada[1] da benzer bir problemden bahsedilmiş. meda'nın da değindiği üzere bios ayarlarınıza bakmanızın yararı olabilir. "Onboard WLAN Disabled" gibi bir ayar var ise "Enabled" yaparak düzeltilebilir.

[1]: http://askubuntu.com/questions/508143/operation-not-possible-due-to-rf-kill-phy0-hard-blocked

tüm bios'u kontrol ettim ancak dediğiniz gibi bir ayar göremedim 
edit: ayrıca windowsta sorunsuz çalışıyor

meda

cd /tmp/
wget http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.18-vivid/linux-headers-3.18.0-031800-generic_3.18.0-031800.201412071935_amd64.deb
wget http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.18-vivid/linux-headers-3.18.0-031800_3.18.0-031800.201412071935_all.deb
wget http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.18-vivid/linux-image-3.18.0-031800-generic_3.18.0-031800.201412071935_amd64.deb
sudo dpkg -i linux-headers-3.18.0-*.deb linux-image-3.18.0-*.deb
Gözün korkmasın. En kötü başlangıçta eski çekirdeği seçerek sistemi açarsın.  :)

Belki 14.10 özel bir durumdur. Ubuntu 14.04.1 kurmadan deneme yapar mısınız ?
"BEDAVA Bedava yaşıyoruz, bedava;Hava bedava, bulut bedava;
Dere tepe bedava;Yağmur çamur bedava;Otomobillerin dışı,Sinemaların kapısı,Camekanlar bedava; Peynir ekmek değil ama Acı su bedava;Kelle fiyatına hürriyet, Esirlik bedava; Bedava yaşıyoruz, bedava. Orhan VELİ"

if

Hard blocked: yes
Fn tuşuyla açın aygıtı.

dalyaro

Alıntı yapılan: meda - 08 Aralık 2014 - 22:26:56
cd /tmp/
wget http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.18-vivid/linux-headers-3.18.0-031800-generic_3.18.0-031800.201412071935_amd64.deb
wget http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.18-vivid/linux-headers-3.18.0-031800_3.18.0-031800.201412071935_all.deb
wget http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.18-vivid/linux-image-3.18.0-031800-generic_3.18.0-031800.201412071935_amd64.deb
sudo dpkg -i linux-headers-3.18.0-*.deb linux-image-3.18.0-*.deb
Gözün korkmasın. En kötü başlangıçta eski çekirdeği seçerek sistemi açarsın.  :)

Belki 14.10 özel bir durumdur. Ubuntu 14.04.1 kurmadan deneme yapar mısınız ?

14.04 te kullandım aynı sorun vardı hatta Linux mint denedim ondada aynı sorun vardı birebir aynı şekilde


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 09 Aralık 2014 - 22:27:10

Alıntı yapılan: if - 08 Aralık 2014 - 22:36:56
Hard blocked: yes
Fn tuşuyla açın aygıtı.

Fn tuşu işe yaramıyor tüm Fn tuşları çalışıyor ona gelince hiç bir hareket yok

meda

Manjaro-XFCE 0.8.11 sürümü ile deneme yapın. Olmazsa bu iş daha da çetrefilli hal alacak, BİOS güncellemeyi deneyin.
"BEDAVA Bedava yaşıyoruz, bedava;Hava bedava, bulut bedava;
Dere tepe bedava;Yağmur çamur bedava;Otomobillerin dışı,Sinemaların kapısı,Camekanlar bedava; Peynir ekmek değil ama Acı su bedava;Kelle fiyatına hürriyet, Esirlik bedava; Bedava yaşıyoruz, bedava. Orhan VELİ"

dalyaro

Alıntı yapılan: meda - 09 Aralık 2014 - 22:59:35
Manjaro-XFCE 0.8.11 sürümü ile deneme yapın. Olmazsa bu iş daha da çetrefilli hal alacak, BİOS güncellemeyi deneyin.

Manjaro-XFCE 0.8.11 indiriyorum şuan canlı olarak deneyeceğim

meda

#11
Çift sistem kullandığım zamanlar Windows üzerinden Wifi kapattıp. Ubuntu'ya geçtiğimde fn-f2 aç-kapat işlevi çalışmadığını gördüm. Birkaç çözüm çözüm denedikten sonra BİOS ayarlarını default yani önanımlı duruma getirince wifi aktif olmuştu. Kablosuzun çalışmaması kötü oluyor. :( Umarım sizin sorunuzda bir şekilde çözülür.
"BEDAVA Bedava yaşıyoruz, bedava;Hava bedava, bulut bedava;
Dere tepe bedava;Yağmur çamur bedava;Otomobillerin dışı,Sinemaların kapısı,Camekanlar bedava; Peynir ekmek değil ama Acı su bedava;Kelle fiyatına hürriyet, Esirlik bedava; Bedava yaşıyoruz, bedava. Orhan VELİ"

dalyaro

Alıntı yapılan: meda - 09 Aralık 2014 - 22:59:35
Manjaro-XFCE 0.8.11 sürümü ile deneme yapın. Olmazsa bu iş daha da çetrefilli hal alacak, BİOS güncellemeyi deneyin.

Manjaro-XFCE 0.8.11 ile canlı deneme yaptım sonuç yine aynı :(

meda

sudo modprobe -rfv ath9k
sudo rfkill unblock all
sudo modprobe -v ath9k


Burada birşeyler var. http://ubuntuforums.org/showthread.php?t=1895671
"BEDAVA Bedava yaşıyoruz, bedava;Hava bedava, bulut bedava;
Dere tepe bedava;Yağmur çamur bedava;Otomobillerin dışı,Sinemaların kapısı,Camekanlar bedava; Peynir ekmek değil ama Acı su bedava;Kelle fiyatına hürriyet, Esirlik bedava; Bedava yaşıyoruz, bedava. Orhan VELİ"

dalyaro

Alıntı yapılan: meda - 10 Aralık 2014 - 00:13:52
sudo modprobe -rfv ath9k
sudo rfkill unblock all
sudo modprobe -v ath9k


Burada *bir şeyler var. http://ubuntuforums.org/showthread.php?t=1895671

bahsettiğiniz kaynaktaki yöntemide denedim ama malesef hala olmuyor :(

emrr5

Ayni sorunu masaüstü bilgisayarimda ubuntu 12.04 surumunfen ber ben de yasiyorum. Daha once benzer basliklar ve burada onerilen cozumleri denedim hicbirinden sonuc alamadim. Ancak ben de soyle bir sey oluyor: önce windowsu acip yeniden baslat deyip ubuntuya gecersem wifi calisiyor. Uzun zamandir bu sekilde idare ediyorum. Kesin bir cozum degil ancak isimi görüyor, isterseniz siz de bir deneyin.

heartsmagic

Şu öneriyi [1] bir deneyelim:
echo "options asus_nb_wmi wapf=0" | sudo tee -a /etc/modprobe.d/asus.conf
Sonra sistemi yeniden başlat, fn tuşu çalışıyor mu diye bir bak. Eğer işe yaramazsa:
sudo sed -i 's/wapf=0/wapf=1/' /etc/modprobe.d/asus.conf
Sistemi yeniden başlatıp dene. Bu da işe yaramazsa:
sudo sed -i 's/wapf=1/wapf=4/' /etc/modprobe.d/asus.conf
Yeniden sistemi başlatıp denersin.

[1] http://askubuntu.com/a/351860/32037
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?


Böylece yalan, dünyanın düzenine dönüştürülüyor.

dalyaro

Alıntı yapılan: heartsmagic - 11 Aralık 2014 - 14:04:11
Şu öneriyi [1] bir deneyelim:
echo "options asus_nb_wmi wapf=0" | sudo tee -a /etc/modprobe.d/asus.conf
Sonra sistemi yeniden başlat, fn tuşu çalışıyor mu diye bir bak. Eğer işe yaramazsa:
sudo sed -i 's/wapf=0/wapf=1/' /etc/modprobe.d/asus.conf
Sistemi yeniden başlatıp dene. Bu da işe yaramazsa:
sudo sed -i 's/wapf=1/wapf=4/' /etc/modprobe.d/asus.conf
Yeniden sistemi başlatıp denersin.

[1] http://askubuntu.com/a/351860/32037


Ne diyeceğimi bilmşyorum üstad allah razı olsun sizde sorunum çözüldü çok teşekkür ediyorum  :)

if