Asus k53sv Sdcard okuyucu sorunu

[heartsmagic]

Takas alanı eklenmesi aşamasında sorun yoktur, mesele başka bir şey olabilir. Biraz bakındım ama takas alanı konusunda bir şey elde edemedim ne yazık ki. fstab üzerinden kapatmayı deneyelim ama etrafta gördüklerim bunun da çözüm olmayacağı yönünde. Bir bakalım sende nasıl tepki verecek.

Kod Seç Genişlet

sudo -H gedit /etc/fstab

ile açacağın dosyada son satırın başına bir adet # koy. Kısacası şöyle olacak:

Kod Seç Genişlet

#UUID=a29a9804-3ff1-42c3-b653-e0e30d4d905c none            swap    sw              0       0

Diğer mesele de yazıcı ile alakalı olmayabilirmiş, biraz Apparmor kısmına değinmiş insanlar. Onu da bir iptal edip duruma bakalım.

Kod Seç Genişlet

sudo /etc/init.d/apparmor stop
sudo update-rc.d -f apparmor remove

Bu işlemlerden sonra sistemi yeniden başlatıp yine dmesg çıktısını geçersin.

[FevziOztas]

Şimdi açılırken gelen 2 satır 3 e çıktı ve gelen satırda şöyle yazıyor
Edit : Hocam süre tuttum açılırken bu usb port hatalarının geldiği ekranda 20 saniye bekliyor daha sonra açılıyor hani 1 2 saniye gösterse takılmıcam zararı yok nasıl olsa yazanların ama 20 saniye sizce de çok değilmi ? Çok değil Sen kendi kendine takılmışsın açılış süresine diyosanız  konuyu kapatabiliriz.

Kod Seç Genişlet

[    1.840940] usb 3-1.1: device descriptor read/64, error -32


Kod Seç Genişlet

[    1.036461] xhci_hcd 0000:04:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
[    1.036638] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.036640] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.036641] usb usb1: Product: xHCI Host Controller
[    1.036643] usb usb1: Manufacturer: Linux 4.2.0-35-generic xhci-hcd
[    1.036644] usb usb1: SerialNumber: 0000:04:00.0
[    1.036759] hub 1-0:1.0: USB hub found
[    1.036770] hub 1-0:1.0: 2 ports detected
[    1.036855] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    1.036858] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2
[    1.036902] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.036918] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    1.036919] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.036921] usb usb2: Product: xHCI Host Controller
[    1.036922] usb usb2: Manufacturer: Linux 4.2.0-35-generic xhci-hcd
[    1.036924] usb usb2: SerialNumber: 0000:04:00.0
[    1.037022] hub 2-0:1.0: USB hub found
[    1.037031] hub 2-0:1.0: 2 ports detected
[    1.037117] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.037123] ehci-pci: EHCI PCI platform driver
[    1.037218] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.037222] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    1.037234] ehci-pci 0000:00:1a.0: debug port 2
[    1.041151] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.041161] ehci-pci 0000:00:1a.0: irq 16, io mem 0xdf008000
[    1.052256] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.052290] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.052292] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.052293] usb usb3: Product: EHCI Host Controller
[    1.052295] usb usb3: Manufacturer: Linux 4.2.0-35-generic ehci_hcd
[    1.052296] usb usb3: SerialNumber: 0000:00:1a.0
[    1.052403] hub 3-0:1.0: USB hub found
[    1.052408] hub 3-0:1.0: 2 ports detected
[    1.052574] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.052579] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    1.052591] ehci-pci 0000:00:1d.0: debug port 2
[    1.056483] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.056491] ehci-pci 0000:00:1d.0: irq 23, io mem 0xdf007000
[    1.068370] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.068469] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    1.068471] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.068473] usb usb4: Product: EHCI Host Controller
[    1.068475] usb usb4: Manufacturer: Linux 4.2.0-35-generic ehci_hcd
[    1.068477] usb usb4: SerialNumber: 0000:00:1d.0
[    1.068645] hub 4-0:1.0: USB hub found
[    1.068652] hub 4-0:1.0: 2 ports detected
[    1.068761] ehci-platform: EHCI generic platform driver
[    1.068777] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.068783] ohci-pci: OHCI PCI platform driver
[    1.068796] ohci-platform: OHCI generic platform driver
[    1.068808] uhci_hcd: USB Universal Host Controller Interface driver
[    1.068869] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.070891] i8042: Detected active multiplexing controller, rev 1.1
[    1.071762] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.071766] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.071797] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.071822] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.071847] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.071987] mousedev: PS/2 mouse device common for all mice
[    1.072182] rtc_cmos 00:01: RTC can wake from S4
[    1.072325] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.072352] rtc_cmos 00:01: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    1.072359] i2c /dev entries driver
[    1.072435] device-mapper: uevent: version 1.0.3
[    1.072512] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
[    1.072525] Intel P-state driver initializing.
[    1.072907] ledtrig-cpu: registered to indicate activity on CPUs
[    1.073392] PCCT header not found.
[    1.073987] NET: Registered protocol family 10
[    1.074673] NET: Registered protocol family 17
[    1.074706] Key type dns_resolver registered
[    1.076045] Loading compiled-in X.509 certificates
[    1.078826] Loaded X.509 cert 'Build time autogenerated kernel key: 78a2b17e20a39676a35e2c3e160e701f99e0659b'
[    1.078871] registered taskstats version 1
[    1.078934] zswap: loading zswap
[    1.078940] zswap: using zbud pool
[    1.078952] zswap: using lzo compressor
[    1.082337] Key type trusted registered
[    1.086862] Key type encrypted registered
[    1.086869] AppArmor: AppArmor sha1 policy hashing enabled
[    1.086873] ima: No TPM chip found, activating TPM-bypass!
[    1.086894] evm: HMAC attrs: 0x1
[    1.087259]   Magic number: 12:468:433
[    1.087358] rtc_cmos 00:01: setting system clock to 2016-04-23 13:24:45 UTC (1461417885)
[    1.087414] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.087415] EDD information not available.
[    1.087492] PM: Hibernation image not present or could not be loaded.
[    1.087766] Freeing unused kernel memory: 1472K (ffffffff81d39000 - ffffffff81ea9000)
[    1.087768] Write protecting the kernel read-only data: 12288k
[    1.087930] Freeing unused kernel memory: 208K (ffff8800017cc000 - ffff880001800000)
[    1.088007] Freeing unused kernel memory: 280K (ffff880001bba000 - ffff880001c00000)
[    1.098579] systemd-udevd[119]: starting version 204
[    1.108464] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.122139] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.122150] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.122579] r8169 0000:05:00.0 eth0: RTL8168e/8111e at 0xffffc90000ef6000, 54:04:a6:34:c9:bb, XID 0c200000 IRQ 30
[    1.122582] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.124663] ahci 0000:00:1f.2: version 3.0
[    1.124881] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[    1.124886] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[    1.134272] scsi host0: ahci
[    1.134397] scsi host1: ahci
[    1.134505] scsi host2: ahci
[    1.134619] scsi host3: ahci
[    1.134749] scsi host4: ahci
[    1.134976] scsi host5: ahci
[    1.135048] ata1: SATA max UDMA/133 abar m2048@0xdf006000 port 0xdf006100 irq 31
[    1.135052] ata2: SATA max UDMA/133 abar m2048@0xdf006000 port 0xdf006180 irq 31
[    1.135054] ata3: DUMMY
[    1.135056] ata4: DUMMY
[    1.135057] ata5: DUMMY
[    1.135058] ata6: DUMMY
[    1.364622] usb 3-1: new high-speed USB device number 2 using ehci-pci
[    1.380647] usb 4-1: new high-speed USB device number 2 using ehci-pci
[    1.404643] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[    1.452714] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.452759] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.454621] ata2.00: ATAPI: MATSHITADVD-RAM UJ8B0, 1.00, max UDMA/100
[    1.456866] ata2.00: configured for UDMA/100
[    1.457390] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[    1.457401] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.457407] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.462443] ata1.00: ATA-8: WDC WD7500BPVT-80HXZT3, 01.01A01, max UDMA/133
[    1.462452] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.467445] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[    1.467457] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.467464] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.471723] ata1.00: configured for UDMA/133
[    1.472015] scsi 0:0:0:0: Direct-Access     ATA      WDC WD7500BPVT-8 1A01 PQ: 0 ANSI: 5
[    1.472267] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[    1.472271] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.472288] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.472395] sd 0:0:0:0: [sda] Write Protect is off
[    1.472397] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.472464] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.474002] scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ8B0    1.00 PQ: 0 ANSI: 5
[    1.490634] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.490638] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.490819] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.490884] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.497462] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
[    1.497465] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.497776] hub 3-1:1.0: USB hub found
[    1.497901] hub 3-1:1.0: 6 ports detected
[    1.513505] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
[    1.513509] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.513796] hub 4-1:1.0: USB hub found
[    1.513875] hub 4-1:1.0: 6 ports detected
[    1.532690]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[    1.533240] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.593208] usb 1-1: New USB device found, idVendor=046d, idProduct=c21d
[    1.593219] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.593224] usb 1-1: Product: Gamepad F310
[    1.593229] usb 1-1: Manufacturer: Logitech
[    1.593233] usb 1-1: SerialNumber: C15028A6
[    1.768877] usb 3-1.1: new full-speed USB device number 3 using ehci-pci
[    1.784890] usb 4-1.2: new full-speed USB device number 3 using ehci-pci
[    1.840940] usb 3-1.1: device descriptor read/64, error -32
[    1.879603] usb 4-1.2: New USB device found, idVendor=09da, idProduct=054f
[    1.879614] usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.879620] usb 4-1.2: Product: USB Device
[    1.879625] usb 4-1.2: Manufacturer: A4TECH
[    1.882943] hidraw: raw HID events driver (C) Jiri Kosina
[    1.886740] usbcore: registered new interface driver usbhid
[    1.886742] usbhid: USB HID core driver
[    1.888145] input: A4TECH USB Device as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2:1.0/0003:09DA:054F.0001/input/input12
[    1.941148] hid-generic 0003:09DA:054F.0001: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:1d.0-1.2/input0
[    1.941259] input: A4TECH USB Device as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2:1.1/0003:09DA:054F.0002/input/input13
[    1.941361] hid-generic 0003:09DA:054F.0002: input,hidraw1: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:1d.0-1.2/input1
[    2.017082] tsc: Refined TSC clocksource calibration: 2394.562 MHz
[    2.017085] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22842644443, max_idle_ns: 440795204673 ns
[    2.038199] usb 3-1.1: New USB device found, idVendor=0cf3, idProduct=3005
[    2.038208] usb 3-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.085454] usb 4-1-port3: over-current condition
[    2.109189] usb 3-1.2: new high-speed USB device number 4 using ehci-pci
[    2.293649] usb 4-1-port4: over-current condition
[    2.333487] usb 3-1.2: New USB device found, idVendor=058f, idProduct=a014
[    2.333498] usb 3-1.2: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[    2.333504] usb 3-1.2: Product: ASUS USB2.0 WebCam
[    2.333509] usb 3-1.2: Manufacturer: 04G6200086K1AN1AD000F2Y
[    2.413443] usb 3-1.4: new high-speed USB device number 5 using ehci-pci
[    2.506459] usb 3-1.4: New USB device found, idVendor=0bda, idProduct=0139
[    2.506473] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.506475] usb 3-1.4: Product: USB2.0-CRW
[    2.506476] usb 3-1.4: Manufacturer: Generic
[    2.506477] usb 3-1.4: SerialNumber: 20100201396000000
[    2.511003] usbcore: registered new interface driver rtsx_usb
[    2.843090] random: nonblocking pool is initialized
[    3.018100] clocksource: Switched to clocksource tsc
[    3.421208] mmc0: new ultra high speed SDR50 SDHC card at address 0002
[    3.422892] mmcblk0: mmc0:0002 SD16G 14.9 GiB
[    3.887240] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    5.130467] init: plymouth-upstart-bridge main process (201) terminated with status 1
[    5.130477] init: plymouth-upstart-bridge main process ended, respawning
[    5.132175] init: plymouth-upstart-bridge main process (215) terminated with status 1
[    5.132187] init: plymouth-upstart-bridge main process ended, respawning
[    5.133400] init: plymouth-upstart-bridge main process (217) terminated with status 1
[    5.133410] init: plymouth-upstart-bridge main process ended, respawning
[    5.134972] init: plymouth-upstart-bridge main process (218) terminated with status 1
[    5.134983] init: plymouth-upstart-bridge main process ended, respawning
[    5.136220] init: plymouth-upstart-bridge main process (220) terminated with status 1
[    5.136230] init: plymouth-upstart-bridge main process ended, respawning
[    5.137789] init: plymouth-upstart-bridge main process (221) terminated with status 1
[    5.137801] init: plymouth-upstart-bridge main process ended, respawning
[    5.139218] init: plymouth-upstart-bridge main process (223) terminated with status 1
[    5.139226] init: plymouth-upstart-bridge main process ended, respawning
[    5.140813] init: plymouth-upstart-bridge main process (224) terminated with status 1
[    5.140825] init: plymouth-upstart-bridge main process ended, respawning
[    5.142266] init: plymouth-upstart-bridge main process (226) terminated with status 1
[    5.142275] init: plymouth-upstart-bridge main process ended, respawning
[    5.143869] init: plymouth-upstart-bridge main process (227) terminated with status 1
[    5.143881] init: plymouth-upstart-bridge main process ended, respawning
[    5.145232] init: plymouth-upstart-bridge main process (229) terminated with status 1
[    5.145240] init: plymouth-upstart-bridge respawning too fast, stopped
[   14.488692] systemd-udevd[330]: starting version 204
[   14.611253] wmi: Mapper loaded
[   14.631789] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   14.647064] [drm] Initialized drm 1.1.0 20060810
[   14.649557] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150619/utaddress-254)
[   14.649565] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.649569] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000549 (\SBGP) (20150619/utaddress-254)
[   14.649574] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150619/utaddress-254)
[   14.649577] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.649579] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000549 (\SBGP) (20150619/utaddress-254)
[   14.649583] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150619/utaddress-254)
[   14.649586] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.649588] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000549 (\SBGP) (20150619/utaddress-254)
[   14.649591] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150619/utaddress-254)
[   14.649595] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.649597] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   14.680114] Bluetooth: Core ver 2.20
[   14.680131] NET: Registered protocol family 31
[   14.680133] Bluetooth: HCI device and connection manager initialized
[   14.680138] Bluetooth: HCI socket layer initialized
[   14.680141] Bluetooth: L2CAP socket layer initialized
[   14.680147] Bluetooth: SCO socket layer initialized
[   14.718476] usbcore: registered new interface driver btusb
[   14.721754] ath: phy0: Set BT/WLAN RX diversity capability
[   14.722656] [drm] Memory usable by graphics device = 2048M
[   14.722661] [drm] Replacing VGA console driver
[   14.723341] Console: switching to colour dummy device 80x25
[   14.732423] AVX version of gcm_enc/dec engaged.
[   14.732426] AES CTR mode by8 optimization enabled
[   14.772355] ath: phy0: ASPM enabled: 0x42
[   14.772360] ath: EEPROM regdomain: 0x60
[   14.772361] ath: EEPROM indicates we should expect a direct regpair map
[   14.772364] ath: Country alpha2 being used: 00
[   14.772365] ath: Regpair used: 0x60
[   14.774057] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   14.774059] [drm] Driver supports precise vblank timestamp query.
[   14.774192] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   14.793617] ACPI: Video Device [GFX0] (multi-head: yes  rom: yes  post: no)
[   14.794732] acpi device:50: registered as cooling_device4
[   14.794793] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:4c/LNXVIDEO:00/input/input14
[   14.795285] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   14.801885] acpi device:52: registered as cooling_device5
[   14.801975] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input15
[   14.802688] lp: driver loaded but no devices found
[   14.807094] fbcon: inteldrmfb (fb0) is primary device
[   14.811936] ppdev: user-space parallel port driver
[   14.825473] [drm] Initialized i915 1.6.0 20150522 for 0000:00:02.0 on minor 0
[   14.827751] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   14.828160] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90000f80000, irq=17
[   14.859440] intel_rapl: Found RAPL domain package
[   14.859442] intel_rapl: Found RAPL domain core
[   14.859443] intel_rapl: Found RAPL domain uncore
[   14.877595] asus_wmi: ASUS WMI generic driver loaded
[   14.879222] asus_wmi: Initialization: 0x1
[   14.879392] asus_wmi: SFUN value: 0x1a0af7
[   14.880100] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input16
[   14.880416] asus_wmi: Number of fans: 0
[   14.958815] cfg80211: World regulatory domain updated:
[   14.958817] cfg80211:  DFS Master region: unset
[   14.958817] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   14.958819] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   14.958820] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   14.958821] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[   14.958821] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   14.958822] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   14.968918] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   14.968920] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   14.968921] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   14.968921] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   14.968922] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   14.968924] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x19
[   14.968925] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   14.988194] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[   14.988297] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[   14.988389] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[   15.080339] audit: type=1400 audit(1461407099.479:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=416 comm="apparmor_parser"
[   15.080519] audit: type=1400 audit(1461407099.479:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=416 comm="apparmor_parser"
[   15.080687] audit: type=1400 audit(1461407099.479:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=416 comm="apparmor_parser"
[   15.150975] media: Linux media interface: v0.10
[   15.152338] input: Logitech Gamepad F310 as /devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb1/1-1/1-1:1.0/input/input20
[   15.152405] usbcore: registered new interface driver xpad
[   15.156367] Linux video capture interface: v2.00
[   15.165068] uvcvideo: Found UVC 1.00 device ASUS USB2.0 WebCam (058f:a014)
[   15.167967] input: ASUS USB2.0 WebCam as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input21
[   15.168234] usbcore: registered new interface driver uvcvideo
[   15.168234] USB Video Class driver (1.1.1)
[   15.466656] Console: switching to colour frame buffer device 170x48
[   15.470151] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   15.470153] i915 0000:00:02.0: registered panic notifier
[   15.486222] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   16.126164] init: failsafe main process (643) killed by TERM signal
[   16.566594] Bluetooth: RFCOMM TTY layer initialized
[   16.566602] Bluetooth: RFCOMM socket layer initialized
[   16.566608] Bluetooth: RFCOMM ver 1.11
[   16.617794] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   16.617797] Bluetooth: BNEP filters: protocol multicast
[   16.617801] Bluetooth: BNEP socket layer initialized
[   16.675153] init: avahi-cups-reload main process (756) terminated with status 1
[   16.819500] audit: type=1400 audit(1461407101.215:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=746 comm="apparmor_parser"
[   16.819783] audit: type=1400 audit(1461407101.215:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=746 comm="apparmor_parser"
[   18.250917] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   18.458250] audit: type=1400 audit(1461407102.851:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=808 comm="apparmor_parser"
[   18.507054] r8169 0000:05:00.0 eth0: link down
[   18.507070] r8169 0000:05:00.0 eth0: link down
[   18.507128] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   20.461337] wlan0: authenticate with 14:b9:68:80:40:d4
[   20.480969] wlan0: send auth to 14:b9:68:80:40:d4 (try 1/3)
[   20.482771] wlan0: authenticated
[   20.484848] wlan0: associate with 14:b9:68:80:40:d4 (try 1/3)
[   20.488620] wlan0: RX AssocResp from 14:b9:68:80:40:d4 (capab=0x431 status=0 aid=1)
[   20.488729] wlan0: associated
[   20.488739] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   20.490452] ath: EEPROM regdomain: 0x8318
[   20.490455] ath: EEPROM indicates we should expect a country code
[   20.490456] ath: doing EEPROM country->regdmn map search
[   20.490457] ath: country maps to regdmn code: 0x36
[   20.490458] ath: Country alpha2 being used: TR
[   20.490458] ath: Regpair used: 0x36
[   20.490460] ath: regdomain 0x8318 dynamically updated by country IE
[   20.490485] cfg80211: Regulatory domain changed to country: TR
[   20.490486] cfg80211:  DFS Master region: unset
[   20.490487] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   20.490489] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   20.490490] cfg80211:   (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   20.490492] cfg80211:   (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 2000 mBm), (0 s)
[   20.490493] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[   20.649368] r8169 0000:05:00.0 eth0: link up
[   20.649393] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   20.742329] wlan0: deauthenticating from 14:b9:68:80:40:d4 by local choice (Reason: 2=PREV_AUTH_NOT_VALID)
[   20.750252] wlan0: authenticate with 14:b9:68:80:40:d4
[   20.763770] wlan0: send auth to 14:b9:68:80:40:d4 (try 1/3)
[   20.764590] cfg80211: World regulatory domain updated:
[   20.764608] cfg80211:  DFS Master region: unset
[   20.764610] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   20.764613] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   20.764617] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   20.764620] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[   20.764622] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   20.764625] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   20.765441] wlan0: authenticated
[   20.769045] wlan0: associate with 14:b9:68:80:40:d4 (try 1/3)
[   20.773322] wlan0: RX AssocResp from 14:b9:68:80:40:d4 (capab=0x431 status=0 aid=1)
[   20.773431] wlan0: associated
[   20.775074] ath: EEPROM regdomain: 0x8318
[   20.775076] ath: EEPROM indicates we should expect a country code
[   20.775078] ath: doing EEPROM country->regdmn map search
[   20.775079] ath: country maps to regdmn code: 0x36
[   20.775080] ath: Country alpha2 being used: TR
[   20.775080] ath: Regpair used: 0x36
[   20.775082] ath: regdomain 0x8318 dynamically updated by country IE
[   20.775110] cfg80211: Regulatory domain changed to country: TR
[   20.775110] cfg80211:  DFS Master region: unset
[   20.775112] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   20.775114] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   20.775115] cfg80211:   (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   20.775117] cfg80211:   (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 2000 mBm), (0 s)
[   20.775118] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[   25.162793] bbswitch: module verification failed: signature and/or required key missing - tainting kernel
[   25.162992] bbswitch: version 0.7
[   25.162998] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[   25.163002] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEGR.GFX0
[   25.163012] ACPI Warning: \_SB_.PCI0.PEGR.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)
[   25.163118] bbswitch: detected an Optimus _DSM function
[   25.163136] pci 0000:01:00.0: enabling device (0000 -> 0003)
[   25.163180] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[   25.165030] bbswitch: disabling discrete graphics
[   25.165039] ACPI Warning: \_SB_.PCI0.PEGR.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150619/nsarguments-95)


[heartsmagic]

20 saniye normal, bende de o kadar sürede açılıyor sistem:

Kod Seç Genişlet

systemd-analyze                                                                                                     

Startup finished in 2.902s (kernel) + 19.441s (userspace) = 22.344s

Sende ne diyor ilgili komut? Hoş yine bekleyen yerler var ama o kısmı incelememiz dmesg üzerinden mümkün değil. bootchart olayı falan lazım ki orada da görsek bir şeyler yapabilir miyiz bilmiyorum. 20 saniye normal ama.

Fakat, şu an takas alanını iptal etmiş durumdayız. Bence süreye fazlaca takılma, bir önceki yaptığın işlemi geri al sistem takas alanı ile çalışsın. apparmor kısmını geri alma ama, o kalsın şimdilik.

[FevziOztas]

Diğer dediğinizi yaptım.Ama system analyze de komut bulunamadı hatası alıyorum

Kod Seç Genişlet

fevzi@fevzi-desktop:~$ systemd-analyze
systemd-analyze: komut bulunamadı


[heartsmagic]

Sürüm 14.04 müydü? Öyleyse olmaması normal, benim dalgınlığıma gelmiş.
Söylediğim gibi 20 saniye falansa süre bence hiç takılma

[FevziOztas]

  Tamam hocam.İlgilendiğiniz için çok teşekkür ederim. Konuyu kapatabilirsiniz.