Birdenbire fare donuyor

[KlanimaL]

merhaba arkadaşlar bir başka problemle daha karşınızdayım. geçenlerde kubuntu 14.0 kurdum önceleri * bir şey yoktu sonra sonra mouse durduk yere donmaya başladı tabi mouse donduğu için ekranda donuyor mu donmuyor mu onu bilemiyorum ama klavyeden terminali açıp lightdm'e falan restart atabiliyorum. klavye çalışıyor. bilgisayara veya lightdm'e restart atmadan normale dönmüyor.

aynı donanımla ubuntu 14.04 de problem yok kubuntu da böyle * bir şey var. bunun mutlaka bi çözümü olmalı. ekran kartı driverı ile ilgili olduğunu düşündüğün için buraya açtım.

lspci | egrep "VGA|3D|Display"

Kod Seç Genişlet

00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
01:00.0 3D controller: NVIDIA Corporation GK208M [GeForce GT 740M] (rev a1)


lspci

Kod Seç Genişlet

00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
00:01.1 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x8 Controller (rev 06)
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05)
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5)
00:1c.3 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 (rev d5)
00:1c.5 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #6 (rev d5)
00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation HM86 Express LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05)
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05)
01:00.0 3D controller: NVIDIA Corporation GK208M [GeForce GT 740M] (rev a1)
04:00.0 Ethernet controller: Qualcomm Atheros AR8161 Gigabit Ethernet (rev 10)
05:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8723AE PCIe Wireless Network Adapter


xrandr

Kod Seç Genişlet

Screen 0: minimum 320 x 200, current 1366 x 768, maximum 32767 x 32767
eDP1 connected primary 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 194mm
   1366x768       60.0*+
   1360x768       59.8     60.0 
   1024x768       60.0 
   800x600        60.3     56.2 
   640x480        59.9 
VGA1 disconnected (normal left inverted right x axis y axis)
HDMI1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)



glxinfo kubuntu da çalışmadı.

[if]

Kod Seç Genişlet

lsusb
lsmod | grep xhci
dmesg çıktılarına bakayım.

[KlanimaL]

lsusb

Kod Seç Genişlet

Bus 002 Device 002: ID 8087:8000 Intel Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 004: ID 13d3:3394 IMC Networks
Bus 003 Device 002: ID 3938:1031 
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


lsmod | grep xhci
çıktı yok



dmesg

Kod Seç Genişlet

[    0.256936] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.256937] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.256939] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.256940] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    0.256941] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.256942] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.256943] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    0.256944] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    0.256945] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[    0.256946] pci_bus 0000:00: root bus resource [mem 0xcf200000-0xfeafffff]
[    0.256951] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[    0.257022] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[    0.257048] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.257095] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.257113] pci 0000:00:01.1: [8086:0c05] type 01 class 0x060400
[    0.257138] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[    0.257196] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
[    0.257204] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
[    0.257209] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.257213] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.257275] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[    0.257281] pci 0000:00:03.0: reg 0x10: [mem 0xf7a14000-0xf7a17fff 64bit]
[    0.257370] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[    0.257387] pci 0000:00:14.0: reg 0x10: [mem 0xf7a00000-0xf7a0ffff 64bit]
[    0.257441] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.257480] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.257502] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[    0.257519] pci 0000:00:16.0: reg 0x10: [mem 0xf7a1e000-0xf7a1e00f 64bit]
[    0.257577] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.257645] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[    0.257664] pci 0000:00:1a.0: reg 0x10: [mem 0xf7a1c000-0xf7a1c3ff]
[    0.257745] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.257795] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.257819] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[    0.257832] pci 0000:00:1b.0: reg 0x10: [mem 0xf7a10000-0xf7a13fff 64bit]
[    0.257890] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.257949] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[    0.258007] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.258050] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.258072] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
[    0.258130] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.258173] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.258193] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400
[    0.258252] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.258294] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.258320] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[    0.258339] pci 0000:00:1d.0: reg 0x10: [mem 0xf7a1b000-0xf7a1b3ff]
[    0.258420] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.258471] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.258494] pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100
[    0.258642] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
[    0.258656] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.258663] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.258670] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[    0.258677] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[    0.258684] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.258690] pci 0000:00:1f.2: reg 0x24: [mem 0xf7a1a000-0xf7a1a7ff]
[    0.258724] pci 0000:00:1f.2: PME# supported from D3hot
[    0.258778] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[    0.258791] pci 0000:00:1f.3: reg 0x10: [mem 0xf7a19000-0xf7a190ff 64bit]
[    0.258809] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.258910] pci 0000:01:00.0: [10de:1292] type 00 class 0x030200
[    0.258916] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[    0.258923] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.258930] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.258935] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.258940] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[    0.258971] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.263108] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.263111] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.263113] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.263116] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.263144] pci 0000:00:01.1: PCI bridge to [bus 02]
[    0.263210] acpiphp: Slot [1] registered
[    0.263216] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    0.263298] pci 0000:04:00.0: [1969:1091] type 00 class 0x020000
[    0.263323] pci 0000:04:00.0: reg 0x10: [mem 0xf7900000-0xf793ffff 64bit]
[    0.263336] pci 0000:04:00.0: reg 0x18: [io  0xd000-0xd07f]
[    0.263447] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.263476] pci 0000:04:00.0: System wakeup disabled by ACPI
[    0.271124] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.271128] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.271132] pci 0000:00:1c.3:   bridge window [mem 0xf7900000-0xf79fffff]
[    0.271219] pci 0000:05:00.0: [10ec:8723] type 00 class 0x028000
[    0.271239] pci 0000:05:00.0: reg 0x10: [io  0xc000-0xc0ff]
[    0.271273] pci 0000:05:00.0: reg 0x18: [mem 0xf7800000-0xf7803fff 64bit]
[    0.271372] pci 0000:05:00.0: supports D1 D2
[    0.271374] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.271402] pci 0000:05:00.0: System wakeup disabled by ACPI
[    0.279137] pci 0000:00:1c.5: PCI bridge to [bus 05]
[    0.279140] pci 0000:00:1c.5:   bridge window [io  0xc000-0xcfff]
[    0.279144] pci 0000:00:1c.5:   bridge window [mem 0xf7800000-0xf78fffff]
[    0.279173] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[    0.286624] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.286673] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.286715] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.286756] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.286797] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.286838] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.286879] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.286920] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
[    0.287210] ACPI: Enabled 5 GPEs in block 00 to 3F
[    0.287214] ACPI: \_SB_.PCI0: notify handler is installed
[    0.287274] Found 1 acpi root devices
[    0.287295] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.287359] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.287361] vgaarb: loaded
[    0.287362] vgaarb: bridge control possible 0000:00:02.0
[    0.287463] SCSI subsystem initialized
[    0.287495] libata version 3.00 loaded.
[    0.287506] ACPI: bus type USB registered
[    0.287516] usbcore: registered new interface driver usbfs
[    0.287521] usbcore: registered new interface driver hub
[    0.287533] usbcore: registered new device driver usb
[    0.287603] PCI: Using ACPI for IRQ routing
[    0.288862] PCI: pci_cache_line_size set to 64 bytes
[    0.288909] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.288910] e820: reserve RAM buffer [mem 0xbc1c8000-0xbfffffff]
[    0.288911] e820: reserve RAM buffer [mem 0xbc890000-0xbfffffff]
[    0.288912] e820: reserve RAM buffer [mem 0xcb4cf000-0xcbffffff]
[    0.288913] e820: reserve RAM buffer [mem 0xcb7cb000-0xcbffffff]
[    0.288914] e820: reserve RAM buffer [mem 0x22fe00000-0x22fffffff]
[    0.288962] NetLabel: Initializing
[    0.288963] NetLabel:  domain hash size = 128
[    0.288963] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.288971] NetLabel:  unlabeled traffic allowed by default
[    0.289003] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.289007] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.291034] Switched to clocksource hpet
[    0.294101] AppArmor: AppArmor Filesystem Enabled
[    0.294114] pnp: PnP ACPI init
[    0.294120] ACPI: bus type PNP registered
[    0.294165] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.294168] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.294174] pnp 00:01: [dma 4]
[    0.294184] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.294196] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    0.294257] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.294286] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.294359] system 00:05: [io  0x0680-0x069f] has been reserved
[    0.294361] system 00:05: [io  0xffff] has been reserved
[    0.294362] system 00:05: [io  0xffff] has been reserved
[    0.294363] system 00:05: [io  0xffff] has been reserved
[    0.294364] system 00:05: [io  0x1c00-0x1cfe] has been reserved
[    0.294365] system 00:05: [io  0x1d00-0x1dfe] has been reserved
[    0.294367] system 00:05: [io  0x1e00-0x1efe] has been reserved
[    0.294368] system 00:05: [io  0x1f00-0x1ffe] has been reserved
[    0.294369] system 00:05: [io  0x1800-0x18fe] could not be reserved
[    0.294370] system 00:05: [io  0x164e-0x164f] has been reserved
[    0.294372] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.294386] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.294412] system 00:07: [io  0x1854-0x1857] has been reserved
[    0.294413] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.294442] system 00:08: [io  0x04d0-0x04d1] has been reserved
[    0.294443] system 00:08: [io  0x034c-0x034f] has been reserved
[    0.294445] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.297764] pnp 00:09: Plug and Play ACPI device, IDs ENE0110 (active)
[    0.301111] pnp 00:0a: Plug and Play ACPI device, IDs PNP030b (active)
[    0.301145] pnp 00:0b: Plug and Play ACPI device, IDs ETD0300 PNP0f13 (active)
[    0.301575] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.301577] system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.301578] system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.301580] system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.301582] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.301583] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.301585] system 00:0c: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.301586] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.301588] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
[    0.301590] system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.301591] system 00:0c: [mem 0xf7fef000-0xf7feffff] has been reserved
[    0.301593] system 00:0c: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
[    0.301595] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.301827] pnp: PnP ACPI: found 13 devices
[    0.301828] ACPI: bus type PNP unregistered
[    0.307647] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
[    0.307649] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[    0.307650] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
[    0.307665] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[    0.307666] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.307667] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.307670] pci 0000:00:1c.0: BAR 14: assigned [mem 0xcf200000-0xcf3fffff]
[    0.307672] pci 0000:00:1c.0: BAR 15: assigned [mem 0xcf400000-0xcf5fffff 64bit pref]
[    0.307674] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.307676] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.307677] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.307679] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    0.307682] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.307684] pci 0000:00:01.1: PCI bridge to [bus 02]
[    0.307689] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    0.307691] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.307696] pci 0000:00:1c.0:   bridge window [mem 0xcf200000-0xcf3fffff]
[    0.307699] pci 0000:00:1c.0:   bridge window [mem 0xcf400000-0xcf5fffff 64bit pref]
[    0.307704] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.307706] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.307711] pci 0000:00:1c.3:   bridge window [mem 0xf7900000-0xf79fffff]
[    0.307717] pci 0000:00:1c.5: PCI bridge to [bus 05]
[    0.307720] pci 0000:00:1c.5:   bridge window [io  0xc000-0xcfff]
[    0.307724] pci 0000:00:1c.5:   bridge window [mem 0xf7800000-0xf78fffff]
[    0.307731] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.307732] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.307733] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.307735] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[    0.307736] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[    0.307737] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[    0.307738] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[    0.307739] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[    0.307740] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[    0.307741] pci_bus 0000:00: resource 13 [mem 0xcf200000-0xfeafffff]
[    0.307742] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.307743] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[    0.307744] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[    0.307745] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.307746] pci_bus 0000:03: resource 1 [mem 0xcf200000-0xcf3fffff]
[    0.307748] pci_bus 0000:03: resource 2 [mem 0xcf400000-0xcf5fffff 64bit pref]
[    0.307749] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
[    0.307750] pci_bus 0000:04: resource 1 [mem 0xf7900000-0xf79fffff]
[    0.307751] pci_bus 0000:05: resource 0 [io  0xc000-0xcfff]
[    0.307752] pci_bus 0000:05: resource 1 [mem 0xf7800000-0xf78fffff]
[    0.307772] NET: Registered protocol family 2
[    0.307882] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.308011] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.308185] TCP: Hash tables configured (established 65536 bind 65536)
[    0.308201] TCP: reno registered
[    0.308210] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.308239] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.308297] NET: Registered protocol family 1
[    0.308306] pci 0000:00:02.0: Boot video device
[    0.347187] pci 0000:04:00.0: set MSI_INTX_DISABLE_BUG flag
[    0.347194] PCI: CLS 64 bytes, default 64
[    0.347236] Trying to unpack rootfs image as initramfs...
[    0.671614] Freeing initrd memory: 26908K (ffff880034b62000 - ffff8800365a9000)
[    0.671618] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.671621] software IO TLB [mem 0xc74cf000-0xcb4cf000] (64MB) mapped at [ffff8800c74cf000-ffff8800cb4cefff]
[    0.671822] microcode: CPU0 sig=0x306c3, pf=0x10, revision=0x8
[    0.671827] microcode: CPU1 sig=0x306c3, pf=0x10, revision=0x8
[    0.671830] microcode: CPU2 sig=0x306c3, pf=0x10, revision=0x8
[    0.671835] microcode: CPU3 sig=0x306c3, pf=0x10, revision=0x8
[    0.671840] microcode: CPU4 sig=0x306c3, pf=0x10, revision=0x8
[    0.671844] microcode: CPU5 sig=0x306c3, pf=0x10, revision=0x8
[    0.671849] microcode: CPU6 sig=0x306c3, pf=0x10, revision=0x8
[    0.671855] microcode: CPU7 sig=0x306c3, pf=0x10, revision=0x8
[    0.671887] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.671888] Scanning for low memory corruption every 60 seconds
[    0.672076] Initialise system trusted keyring
[    0.672105] audit: initializing netlink socket (disabled)
[    0.672111] type=2000 audit(1409327799.656:1): initialized
[    0.692376] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.693095] zbud: loaded
[    0.693197] VFS: Disk quotas dquot_6.5.2
[    0.693224] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.693480] fuse init (API version 7.22)
[    0.693525] msgmni has been set to 15807
[    0.693560] Key type big_key registered
[    0.693908] Key type asymmetric registered
[    0.693909] Asymmetric key parser 'x509' registered
[    0.693926] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.693963] io scheduler noop registered
[    0.693963] io scheduler deadline registered (default)
[    0.693977] io scheduler cfq registered
[    0.694114] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.694193] pcieport 0000:00:01.1: irq 41 for MSI/MSI-X
[    0.694441] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.694449] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.694471] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[    0.694472] vesafb: scrolling: redraw
[    0.694473] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.694823] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90004e80000, using 4160k, total 4160k
[    0.767797] Console: switching to colour frame buffer device 170x48
[    0.840540] fb0: VESA VGA frame buffer device
[    0.840551] intel_idle: MWAIT substates: 0x42120
[    0.840552] intel_idle: v0.4 model 0x3C
[    0.840553] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.840669] ipmi message handler version 39.2
[    0.843988] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.847314] ACPI: AC Adapter [ADP1] (on-line)
[    0.851616] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/PNP0C09:00/PNP0C0D:00/input/input0
[    0.857288] ACPI: Lid Switch [LID0]
[    0.857317] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.857320] ACPI: Power Button [PWRB]
[    0.857335] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    0.857337] ACPI: Sleep Button [SLPB]
[    0.857353] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.857354] ACPI: Power Button [PWRF]
[    0.867464] thermal LNXTHERM:00: registered as thermal_zone0
[    0.867465] ACPI: Thermal Zone [THRM] (46 C)
[    0.867489] GHES: HEST is not enabled!
[    0.867591] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.868944] Linux agpgart interface v0.103
[    0.869767] brd: module loaded
[    0.870142] loop: module loaded
[    0.870353] libphy: Fixed MDIO Bus: probed
[    0.870402] tun: Universal TUN/TAP device driver, 1.6
[    0.870403] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.870448] PPP generic driver version 2.4.2
[    0.870489] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.870492] ehci-pci: EHCI PCI platform driver
[    0.870580] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.870585] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.870596] ehci-pci 0000:00:1a.0: debug port 2
[    0.874504] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.874516] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7a1c000
[    0.883662] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.883705] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.883706] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.883708] usb usb1: Product: EHCI Host Controller
[    0.883709] usb usb1: Manufacturer: Linux 3.13.0-35-generic ehci_hcd
[    0.883710] usb usb1: SerialNumber: 0000:00:1a.0
[    0.883850] hub 1-0:1.0: USB hub found
[    0.883854] hub 1-0:1.0: 2 ports detected
[    0.883986] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.883990] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.883999] ehci-pci 0000:00:1d.0: debug port 2
[    0.887913] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.887924] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7a1b000
[    0.899688] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.899728] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.899729] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.899730] usb usb2: Product: EHCI Host Controller
[    0.899731] usb usb2: Manufacturer: Linux 3.13.0-35-generic ehci_hcd
[    0.899732] usb usb2: SerialNumber: 0000:00:1d.0
[    0.899863] hub 2-0:1.0: USB hub found
[    0.899867] hub 2-0:1.0: 2 ports detected
[    0.899932] ehci-platform: EHCI generic platform driver
[    0.899937] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.899938] ohci-pci: OHCI PCI platform driver
[    0.899943] ohci-platform: OHCI generic platform driver
[    0.899946] uhci_hcd: USB Universal Host Controller Interface driver
[    0.900022] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.900024] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.900103] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.900118] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
[    0.900161] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.900162] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.900163] usb usb3: Product: xHCI Host Controller
[    0.900164] usb usb3: Manufacturer: Linux 3.13.0-35-generic xhci_hcd
[    0.900165] usb usb3: SerialNumber: 0000:00:14.0
[    0.900308] hub 3-0:1.0: USB hub found
[    0.900325] hub 3-0:1.0: 14 ports detected
[    0.902001] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.902004] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.902032] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.902034] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.902035] usb usb4: Product: xHCI Host Controller
[    0.902036] usb usb4: Manufacturer: Linux 3.13.0-35-generic xhci_hcd
[    0.902036] usb usb4: SerialNumber: 0000:00:14.0
[    0.902166] hub 4-0:1.0: USB hub found
[    0.902177] hub 4-0:1.0: 4 ports detected
[    0.923877] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.945421] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.945425] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.945634] mousedev: PS/2 mouse device common for all mice
[    0.945962] rtc_cmos 00:06: RTC can wake from S4
[    0.946143] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    0.946171] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.946219] device-mapper: uevent: version 1.0.3
[    0.946333] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    0.946339] ledtrig-cpu: registered to indicate activity on CPUs
[    0.946414] TCP: cubic registered
[    0.946463] NET: Registered protocol family 10
[    0.946587] NET: Registered protocol family 17
[    0.946594] Key type dns_resolver registered
[    0.947043] Loading compiled-in X.509 certificates
[    0.947826] Loaded X.509 cert 'Magrathea: Glacier signing key: b1414ae96c1b0ebb7c141fa405c1f6c98e8a66f0'
[    0.947835] registered taskstats version 1
[    0.949577] Key type trusted registered
[    0.951328] Key type encrypted registered
[    0.953234] AppArmor: AppArmor sha1 policy hashing enabled
[    0.953237] IMA: No TPM chip found, activating TPM-bypass!
[    0.953641] regulator-dummy: disabling
[    0.953775]   Magic number: 10:673:943
[    0.953803] tty tty0: hash matches
[    0.953805] tty console: hash matches
[    0.953889] rtc_cmos 00:06: setting system clock to 2014-08-29 15:56:40 UTC (1409327800)
[    0.955361] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.955363] EDD information not available.
[    0.955393] PM: Hibernation image not present or could not be loaded.
[    0.968635] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.023907] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.023913] ACPI: Battery Slot [BAT1] (battery present)
[    1.024707] Freeing unused kernel memory: 1336K (ffffffff81d1f000 - ffffffff81e6d000)
[    1.024709] Write protecting the kernel read-only data: 12288k
[    1.026456] Freeing unused kernel memory: 808K (ffff880001736000 - ffff880001800000)
[    1.027564] Freeing unused kernel memory: 692K (ffff880001b53000 - ffff880001c00000)
[    1.039447] systemd-udevd[146]: starting version 204
[    1.047137] wmi: Mapper loaded
[    1.060300] ahci 0000:00:1f.2: version 3.0
[    1.060326] [drm] Initialized drm 1.1.0 20060810
[    1.060444] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[    1.060488] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x11 impl SATA mode
[    1.060491] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[    1.070164] alx 0000:04:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [8c:89:a5:0e:f5:28]
[    1.071812] scsi0 : ahci
[    1.072002] scsi1 : ahci
[    1.072065] scsi2 : ahci
[    1.072179] scsi3 : ahci
[    1.072231] scsi4 : ahci
[    1.072270] ata1: SATA max UDMA/133 abar m2048@0xf7a1a000 port 0xf7a1a100 irq 43
[    1.072272] ata2: DUMMY
[    1.072273] ata3: DUMMY
[    1.072275] ata4: DUMMY
[    1.072277] ata5: SATA max UDMA/133 abar m2048@0xf7a1a000 port 0xf7a1a300 irq 43
[    1.074369] [drm] Memory usable by graphics device = 2048M
[    1.074372] checking generic (d0000000 410000) vs hw (d0000000 10000000)
[    1.074374] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[    1.074386] Console: switching to colour dummy device 80x25
[    1.076090] MXM: GUID detected in BIOS
[    1.076103] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20131115/nsarguments-95)
[    1.076145] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[    1.076180] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[    1.076329] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[    1.076330] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
[    1.120000] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[    1.120012] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.120013] [drm] Driver supports precise vblank timestamp query.
[    1.120080] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.195968] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.328385] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[    1.328388] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.328552] hub 1-1:1.0: USB hub found
[    1.328637] hub 1-1:1.0: 6 ports detected
[    1.357703] fbcon: inteldrmfb (fb0) is primary device
[    1.392226] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.392244] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.392784] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
[    1.392789] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT4._GTF] (Node ffff8802240fbe10), AE_NOT_FOUND (20131115/psparse-536)
[    1.392977] ata5.00: ATA-9: WDC WD10JPVX-22JC3T0, 01.01A01, max UDMA/133
[    1.392979] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.393590] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
[    1.393595] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT4._GTF] (Node ffff8802240fbe10), AE_NOT_FOUND (20131115/psparse-536)
[    1.393793] ata5.00: configured for UDMA/133
[    1.398210] ata1.00: ATAPI: TSSTcorp CDDVDW SN-208DB, TM00, max UDMA/100
[    1.408294] ata1.00: configured for UDMA/100
[    1.420793] scsi 0:0:0:0: CD-ROM            TSSTcorp CDDVDW SN-208DB  TM00 PQ: 0 ANSI: 5
[    1.431972] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.431973] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.432124] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.432197] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.432477] scsi 4:0:0:0: Direct-Access     ATA      WDC WD10JPVX-22J 01.0 PQ: 0 ANSI: 5
[    1.432618] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.432619] sd 4:0:0:0: [sda] 4096-byte physical blocks
[    1.432638] sd 4:0:0:0: Attached scsi generic sg1 type 0
[    1.432802] sd 4:0:0:0: [sda] Write Protect is off
[    1.432804] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.432859] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.440284] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.542298]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[    1.543182] sd 4:0:0:0: [sda] Attached SCSI disk
[    1.572792] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[    1.572794] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.573048] hub 2-1:1.0: USB hub found
[    1.573143] hub 2-1:1.0: 8 ports detected
[    1.672501] tsc: Refined TSC clocksource calibration: 2194.919 MHz
[    1.740569] usb 3-2: new full-speed USB device number 2 using xhci_hcd
[    1.758278] usb 3-2: New USB device found, idVendor=3938, idProduct=1031
[    1.758279] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.758280] usb 3-2: Product: 2.4G Wireless Mouse
[    1.758281] usb 3-2: Manufacturer: MOSART Semi.
[    1.761063] hidraw: raw HID events driver (C) Jiri Kosina
[    1.763478] usbcore: registered new interface driver usbhid
[    1.763479] usbhid: USB HID core driver
[    1.764789] input: MOSART Semi. 2.4G Wireless Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/input/input7
[    1.764894] hid-generic 0003:3938:1031.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [MOSART Semi. 2.4G Wireless Mouse] on usb-0000:00:14.0-2/input0
[    1.924723] usb 3-3: new high-speed USB device number 3 using xhci_hcd
[    2.081477] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x550f00)
[    2.104743] psmouse serio1: elantech: Synaptics capabilities query result 0x79, 0x15, 0x0c.
[    2.194666] usb 3-3: New USB device found, idVendor=0bda, idProduct=0138
[    2.194668] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.194669] usb 3-3: Product: USB2.0-CRW
[    2.194669] usb 3-3: Manufacturer: Generic
[    2.194670] usb 3-3: SerialNumber: 20090516388200000
[    2.202594] usbcore: registered new interface driver usb-storage
[    2.203473] ums-realtek 3-3:1.0: USB Mass Storage device detected
[    2.218094] scsi5 : usb-storage 3-3:1.0
[    2.218142] usbcore: registered new interface driver ums-realtek
[    2.219753] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6
[    2.365205] usb 3-7: new full-speed USB device number 4 using xhci_hcd
[    2.382205] usb 3-7: New USB device found, idVendor=13d3, idProduct=3394
[    2.382206] usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.382207] usb 3-7: Product: RT Bluetooth Radio
[    2.382208] usb 3-7: Manufacturer: Realtek
[    2.382209] usb 3-7: SerialNumber: 00e04c000001
[    2.382833] usb 3-3: USB disconnect, device number 3
[    2.673612] Switched to clocksource tsc
[    2.821714] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[    2.835989] random: nonblocking pool is initialized
[    3.005773] Console: switching to colour frame buffer device 170x48
[    3.009434] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.009436] i915 0000:00:02.0: registered panic notifier
[    3.009781] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[    3.014636] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[    3.014750] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
[    3.014755] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEG0.PEGP.DD02._BCL] (Node ffff88022410a938), AE_NOT_FOUND (20131115/psparse-536)
[    3.014806] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:46/LNXVIDEO:00/input/input8
[    3.015871] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.019472] acpi device:62: registered as cooling_device8
[    3.019544] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input9
[    3.019627] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    3.019777] [drm] hdmi device  not found 1 0 1
[    3.019915] nouveau  [  DEVICE][0000:01:00.0] BOOT0  : 0x108120a1
[    3.019918] nouveau  [  DEVICE][0000:01:00.0] Chipset: GK208 (NV108)
[    3.019920] nouveau  [  DEVICE][0000:01:00.0] Family : NVE0
[    3.021416] nouveau  [   VBIOS][0000:01:00.0] checking PRAMIN for image...
[    3.022508] nouveau  [   VBIOS][0000:01:00.0] ... signature not found
[    3.022509] nouveau  [   VBIOS][0000:01:00.0] checking PROM for image...
[    3.022564] nouveau  [   VBIOS][0000:01:00.0] ... signature not found
[    3.022565] nouveau  [   VBIOS][0000:01:00.0] checking ACPI for image...
[    3.610673] nouveau  [   VBIOS][0000:01:00.0] ... appears to be valid
[    3.610677] nouveau  [   VBIOS][0000:01:00.0] using image from ACPI
[    3.610767] nouveau  [   VBIOS][0000:01:00.0] BIT signature found
[    3.610770] nouveau  [   VBIOS][0000:01:00.0] version 80.28.25.00.fe
[    3.611099] nouveau  [ DEVINIT][0000:01:00.0] adaptor not initialised
[    3.611101] nouveau  [   VBIOS][0000:01:00.0] running init tables
[    3.673778] nouveau 0000:01:00.0: irq 45 for MSI/MSI-X
[    3.673785] nouveau  [     PMC][0000:01:00.0] MSI interrupts enabled
[    3.673814] nouveau  [     PFB][0000:01:00.0] RAM type: DDR3
[    3.673815] nouveau  [     PFB][0000:01:00.0] RAM size: 2048 MiB
[    3.673816] nouveau  [     PFB][0000:01:00.0]    ZCOMP: 0 tags
[    3.673874] nouveau E[   PIBUS][0000:01:00.0] GPC0: 0x4188ac 0x00000001 (0x1970822e)
[    3.678016] nouveau  [    VOLT][0000:01:00.0] GPU voltage: 600000uv
[    3.700731] nouveau  [  PTHERM][0000:01:00.0] FAN control: none / external
[    3.700735] nouveau  [  PTHERM][0000:01:00.0] fan management: automatic
[    3.700737] nouveau  [  PTHERM][0000:01:00.0] internal sensor: yes
[    3.700755] nouveau  [     CLK][0000:01:00.0] 07: core 405 MHz memory 405 MHz
[    3.700808] nouveau  [     CLK][0000:01:00.0] 0a: core 405-1058 MHz memory 810 MHz
[    3.700876] nouveau  [     CLK][0000:01:00.0] 0f: core 405-1058 MHz memory 1001 MHz
[    3.700937] nouveau  [     CLK][0000:01:00.0] --: core 405 MHz memory 405 MHz
[    3.700944] vga_switcheroo: enabled
[    3.701120] [TTM] Zone  kernel: Available graphics memory: 4048022 kiB
[    3.701122] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    3.701122] [TTM] Initializing pool allocator
[    3.701125] [TTM] Initializing DMA pool allocator
[    3.701133] nouveau  [     DRM] VRAM: 2048 MiB
[    3.701134] nouveau  [     DRM] GART: 1048576 MiB
[    3.701137] nouveau W[     DRM] Pointer to TMDS table invalid
[    3.701138] nouveau  [     DRM] DCB version 4.0
[    3.701139] nouveau W[     DRM] Pointer to flat panel table invalid
[    3.701160] nouveau  [     DRM] ACPI backlight interface available, not registering our own
[    3.701189] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 1
[    3.850351] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[    8.803658] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[    8.804006] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[   15.382118] Adding 8306684k swap on /dev/sda6.  Priority:-1 extents:1 across:8306684k FS
[   15.413046] Adding 3893244k swap on /dev/sda8.  Priority:-2 extents:1 across:3893244k FS
[   15.451871] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.546604] systemd-udevd[374]: starting version 204
[   15.761367] lp: driver loaded but no devices found
[   15.818719] ppdev: user-space parallel port driver
[   16.010698] type=1400 audit(1409317015.536:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=474 comm="apparmor_parser"
[   16.010704] type=1400 audit(1409317015.536:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=474 comm="apparmor_parser"
[   16.010708] type=1400 audit(1409317015.536:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=474 comm="apparmor_parser"
[   16.010717] type=1400 audit(1409317015.536:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=473 comm="apparmor_parser"
[   16.010723] type=1400 audit(1409317015.536:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=473 comm="apparmor_parser"
[   16.010726] type=1400 audit(1409317015.536:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=473 comm="apparmor_parser"
[   16.011040] type=1400 audit(1409317015.540:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=474 comm="apparmor_parser"
[   16.011043] type=1400 audit(1409317015.540:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=474 comm="apparmor_parser"
[   16.011057] type=1400 audit(1409317015.540:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=473 comm="apparmor_parser"
[   16.011060] type=1400 audit(1409317015.540:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=473 comm="apparmor_parser"
[   16.013806] mei_me 0000:00:16.0: irq 46 for MSI/MSI-X
[   16.045486] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[   16.045495] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   16.045499] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
[   16.045503] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
[   16.045508] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPR_ 3 (20131115/utaddress-251)
[   16.045512] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   16.045513] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
[   16.045517] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
[   16.045521] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPR_ 3 (20131115/utaddress-251)
[   16.045524] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   16.045526] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   16.048988] input: MSI WMI hotkeys as /devices/virtual/input/input10
[   16.170124] Bluetooth: Core ver 2.17
[   16.170141] NET: Registered protocol family 31
[   16.170142] Bluetooth: HCI device and connection manager initialized
[   16.170150] Bluetooth: HCI socket layer initialized
[   16.170152] Bluetooth: L2CAP socket layer initialized
[   16.170155] Bluetooth: SCO socket layer initialized
[   16.183452] cfg80211: Calling CRDA to update world regulatory domain
[   16.281044] usbcore: registered new interface driver btusb
[   16.327182] cfg80211: World regulatory domain updated:
[   16.327185] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   16.327187] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.327188] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.327189] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   16.327191] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.327192] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.616698] rtl8723ae: Using firmware rtlwifi/rtl8723fw_B.bin
[   16.732757] HDA driver get symbol successfully from i915 module
[   16.732863] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[   16.743552] snd_hda_intel 0000:00:03.0: irq 48 for MSI/MSI-X
[   16.772432] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[   16.772501] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[   16.772557] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[   16.775177] SKU: Nid=0x1d sku_cfg=0x40459a05
[   16.775178] SKU: port_connectivity=0x1
[   16.775179] SKU: enable_pcbeep=0x0
[   16.775180] SKU: check_sum=0x00000005
[   16.775181] SKU: customization=0x0000009a
[   16.775181] SKU: external_amp=0x0
[   16.775182] SKU: platform_type=0x1
[   16.775182] SKU: swap=0x0
[   16.775183] SKU: override=0x1
[   16.775778] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   16.775780]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   16.775781]    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   16.775782]    mono: mono_out=0x0
[   16.775782]    inputs:
[   16.775783]      Internal Mic=0x19
[   16.775784]      Mic=0x18
[   16.775785] realtek: No valid SSID, checking pincfg 0x40459a05 for NID 0x1d
[   16.775786] realtek: Enabling init ASM_ID=0x9a05 CODEC_ID=10ec0269
[   16.780555] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[   16.780604] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[   16.851956] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[   16.852140] rtlwifi: wireless switch is on
[   18.973883] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
[   19.276370] init: failsafe main process (722) killed by TERM signal
[   19.376345] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   19.376348] Bluetooth: BNEP filters: protocol multicast
[   19.376356] Bluetooth: BNEP socket layer initialized
[   19.396195] Bluetooth: RFCOMM TTY layer initialized
[   19.396202] Bluetooth: RFCOMM socket layer initialized
[   19.396206] Bluetooth: RFCOMM ver 1.11
[   19.540230] init: cups main process (840) killed by HUP signal
[   19.540237] init: cups main process ended, respawning
[   20.198451] nouveau E[   PIBUS][0000:01:00.0] GPC0: 0x4188ac 0x00000001 (0x1c70822e)
[   20.283376] alx 0000:04:00.0: irq 49 for MSI/MSI-X
[   20.283446] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   20.284243] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   20.662148] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   20.662361] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   21.253683] init: plymouth-upstart-bridge main process ended, respawning
[   21.257147] init: plymouth-upstart-bridge main process (1175) terminated with status 1
[   21.257155] init: plymouth-upstart-bridge main process ended, respawning
[   26.829715] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[   26.830023] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[   49.595615] audit_printk_skb: 114 callbacks suppressed
[   49.595617] type=1400 audit(1409317049.088:50): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1507 comm="apparmor_parser"
[   49.595621] type=1400 audit(1409317049.088:51): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1507 comm="apparmor_parser"
[   49.595859] type=1400 audit(1409317049.088:52): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1507 comm="apparmor_parser"
[  153.456919] wlan0: authenticate with 9c:d6:43:37:81:fa
[  153.485849] wlan0: send auth to 9c:d6:43:37:81:fa (try 1/3)
[  153.487237] wlan0: authenticated
[  153.488589] wlan0: associate with 9c:d6:43:37:81:fa (try 1/3)
[  153.498088] wlan0: RX AssocResp from 9c:d6:43:37:81:fa (capab=0x411 status=0 aid=3)
[  153.498321] wlan0: associated
[  153.498339] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  153.543222] wlan0: deauthenticating from 9c:d6:43:37:81:fa by local choice (reason=2)
[  153.578545] cfg80211: Calling CRDA to update world regulatory domain
[  153.578573] wlan0: authenticate with 9c:d6:43:37:81:fa
[  154.302422] wlan0: send auth to 9c:d6:43:37:81:fa (try 1/3)
[  154.302547] cfg80211: World regulatory domain updated:
[  154.302550] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  154.302551] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  154.302552] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  154.302553] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  154.302554] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  154.302555] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  154.303814] wlan0: authenticated
[  154.305391] wlan0: associate with 9c:d6:43:37:81:fa (try 1/3)
[  154.314828] wlan0: RX AssocResp from 9c:d6:43:37:81:fa (capab=0x411 status=0 aid=3)
[  154.315073] wlan0: associated
[  717.977241] wlan0: deauthenticated from 9c:d6:43:37:81:fa (Reason: 6)
[  718.022372] cfg80211: Calling CRDA to update world regulatory domain
[  718.024850] cfg80211: World regulatory domain updated:
[  718.024853] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  718.024854] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  718.024855] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  718.024856] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  718.024857] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  718.024858] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  719.404276] wlan0: authenticate with 9c:d6:43:37:81:fa
[  719.429969] wlan0: send auth to 9c:d6:43:37:81:fa (try 1/3)
[  719.431382] wlan0: authenticated
[  719.431703] wlan0: associate with 9c:d6:43:37:81:fa (try 1/3)
[  719.441172] wlan0: RX AssocResp from 9c:d6:43:37:81:fa (capab=0x411 status=0 aid=3)
[  719.441410] wlan0: associated
[ 1811.746375] wlan0: Connection to AP 9c:d6:43:37:81:fa lost
[ 1811.806429] cfg80211: Calling CRDA to update world regulatory domain
[ 1811.808637] cfg80211: World regulatory domain updated:
[ 1811.808639] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1811.808640] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1811.808641] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1811.808642] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1811.808643] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1811.808644] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1813.184588] wlan0: authenticate with 9c:d6:43:37:81:fa
[ 1813.210171] wlan0: send auth to 9c:d6:43:37:81:fa (try 1/3)
[ 1813.211630] wlan0: authenticated
[ 1813.215751] wlan0: associate with 9c:d6:43:37:81:fa (try 1/3)
[ 1813.225127] wlan0: RX AssocResp from 9c:d6:43:37:81:fa (capab=0x411 status=0 aid=3)
[ 1813.225368] wlan0: associated
[ 2251.571046] wlan0: Connection to AP 9c:d6:43:37:81:fa lost
[ 2251.623252] cfg80211: Calling CRDA to update world regulatory domain
[ 2251.626794] cfg80211: World regulatory domain updated:
[ 2251.626799] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2251.626801] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2251.626804] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2251.626806] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2251.626807] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2251.626809] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2253.004824] wlan0: authenticate with 9c:d6:43:37:81:fa
[ 2253.030766] wlan0: send auth to 9c:d6:43:37:81:fa (try 1/3)
[ 2253.032279] wlan0: authenticated
[ 2253.036464] wlan0: associate with 9c:d6:43:37:81:fa (try 1/3)
[ 2253.047884] wlan0: RX AssocResp from 9c:d6:43:37:81:fa (capab=0x411 status=0 aid=3)
[ 2253.048117] wlan0: associated
[ 2264.107626] wlan0: Connection to AP 9c:d6:43:37:81:fa lost
[ 2264.155962] cfg80211: Calling CRDA to update world regulatory domain
[ 2264.161814] cfg80211: World regulatory domain updated:
[ 2264.161823] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2264.161831] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2264.161838] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2264.161843] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2264.161849] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2264.161855] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2265.538345] wlan0: authenticate with 9c:d6:43:37:81:fa
[ 2265.563459] wlan0: send auth to 9c:d6:43:37:81:fa (try 1/3)
[ 2265.565999] wlan0: authenticated
[ 2265.568993] wlan0: associate with 9c:d6:43:37:81:fa (try 1/3)
[ 2265.578445] wlan0: RX AssocResp from 9c:d6:43:37:81:fa (capab=0x411 status=0 aid=3)
[ 2265.578676] wlan0: associated
[ 3273.627231] wlan0: Connection to AP 9c:d6:43:37:81:fa lost
[ 3273.679343] cfg80211: Calling CRDA to update world regulatory domain
[ 3273.681638] cfg80211: World regulatory domain updated:
[ 3273.681639] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3273.681641] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3273.681642] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3273.681642] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3273.681643] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3273.681644] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3275.057027] wlan0: authenticate with 9c:d6:43:37:81:fa
[ 3275.082864] wlan0: send auth to 9c:d6:43:37:81:fa (try 1/3)
[ 3275.084251] wlan0: authenticated
[ 3275.084556] wlan0: associate with 9c:d6:43:37:81:fa (try 1/3)
[ 3275.094103] wlan0: RX AssocResp from 9c:d6:43:37:81:fa (capab=0x411 status=0 aid=3)
[ 3275.094340] wlan0: associated
[ 3282.147770] wlan0: Connection to AP 9c:d6:43:37:81:fa lost
[ 3282.203970] cfg80211: Calling CRDA to update world regulatory domain
[ 3282.208715] cfg80211: World regulatory domain updated:
[ 3282.208718] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3282.208720] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3282.208722] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3282.208724] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3282.208725] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3282.208726] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3283.581854] wlan0: authenticate with 9c:d6:43:37:81:fa
[ 3283.607634] wlan0: send auth to 9c:d6:43:37:81:fa (try 1/3)
[ 3283.609692] wlan0: authenticated
[ 3283.613132] wlan0: associate with 9c:d6:43:37:81:fa (try 1/3)
[ 3283.622505] wlan0: RX AssocResp from 9c:d6:43:37:81:fa (capab=0x411 status=0 aid=3)
[ 3283.622744] wlan0: associated
[ 3513.341699] wlan0: Connection to AP 9c:d6:43:37:81:fa lost
[ 3513.395543] cfg80211: Calling CRDA to update world regulatory domain
[ 3513.397897] cfg80211: World regulatory domain updated:
[ 3513.397899] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3513.397901] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3513.397902] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3513.397903] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3513.397904] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3513.397905] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3514.777427] wlan0: authenticate with 9c:d6:43:37:81:fa
[ 3514.803182] wlan0: send auth to 9c:d6:43:37:81:fa (try 1/3)
[ 3514.804577] wlan0: authenticated
[ 3514.804769] wlan0: associate with 9c:d6:43:37:81:fa (try 1/3)
[ 3514.814564] wlan0: RX AssocResp from 9c:d6:43:37:81:fa (capab=0x411 status=0 aid=3)
[ 3514.814804] wlan0: associated
[ 3529.891963] wlan0: Connection to AP 9c:d6:43:37:81:fa lost
[ 3529.952317] cfg80211: Calling CRDA to update world regulatory domain
[ 3529.958269] cfg80211: World regulatory domain updated:
[ 3529.958276] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3529.958281] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3529.958285] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3529.958288] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3529.958292] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3529.958295] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3531.325869] wlan0: authenticate with 9c:d6:43:37:81:fa
[ 3531.351799] wlan0: send auth to 9c:d6:43:37:81:fa (try 1/3)
[ 3531.453475] wlan0: send auth to 9c:d6:43:37:81:fa (try 2/3)
[ 3531.557629] wlan0: send auth to 9c:d6:43:37:81:fa (try 3/3)
[ 3531.661670] wlan0: authentication with 9c:d6:43:37:81:fa timed out
[ 3533.115699] wlan0: authenticate with 9c:d6:43:37:81:fa
[ 3533.141521] wlan0: direct probe to 9c:d6:43:37:81:fa (try 1/3)
[ 3533.343432] wlan0: direct probe to 9c:d6:43:37:81:fa (try 2/3)
[ 3533.547616] wlan0: direct probe to 9c:d6:43:37:81:fa (try 3/3)
[ 3533.751832] wlan0: authentication with 9c:d6:43:37:81:fa timed out
[ 3535.706063] wlan0: authenticate with 9c:d6:43:37:81:fa
[ 3535.732065] wlan0: send auth to 9c:d6:43:37:81:fa (try 1/3)
[ 3535.734812] wlan0: authenticated
[ 3535.737828] wlan0: associate with 9c:d6:43:37:81:fa (try 1/3)
[ 3535.747346] wlan0: RX AssocResp from 9c:d6:43:37:81:fa (capab=0x411 status=0 aid=3)
[ 3535.747586] wlan0: associated
[ 3542.428567] wlan0: Connection to AP 9c:d6:43:37:81:fa lost
[ 3542.492693] cfg80211: Calling CRDA to update world regulatory domain
[ 3542.496152] cfg80211: World regulatory domain updated:
[ 3542.496157] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3542.496161] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3542.496164] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3542.496167] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3542.496169] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3542.496172] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3543.866333] wlan0: authenticate with 9c:d6:43:37:81:fa
[ 3543.892224] wlan0: send auth to 9c:d6:43:37:81:fa (try 1/3)
[ 3543.893677] wlan0: authenticated
[ 3543.895343] wlan0: associate with 9c:d6:43:37:81:fa (try 1/3)
[ 3543.905087] wlan0: RX AssocResp from 9c:d6:43:37:81:fa (capab=0x411 status=0 aid=3)
[ 3543.905336] wlan0: associated
[ 3554.969159] wlan0: Connection to AP 9c:d6:43:37:81:fa lost
[ 3555.017290] cfg80211: Calling CRDA to update world regulatory domain
[ 3555.021687] cfg80211: World regulatory domain updated:
[ 3555.021693] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3555.021696] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3555.021699] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3555.021702] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3555.021704] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3555.021706] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3556.399049] wlan0: authenticate with 9c:d6:43:37:81:fa
[ 3556.424907] wlan0: send auth to 9c:d6:43:37:81:fa (try 1/3)
[ 3556.426394] wlan0: authenticated
[ 3556.430528] wlan0: associate with 9c:d6:43:37:81:fa (try 1/3)
[ 3556.440046] wlan0: RX AssocResp from 9c:d6:43:37:81:fa (capab=0x411 status=0 aid=3)
[ 3556.440271] wlan0: associated
[ 3567.501731] wlan0: Connection to AP 9c:d6:43:37:81:fa lost
[ 3567.557865] cfg80211: Calling CRDA to update world regulatory domain
[ 3567.561005] cfg80211: World regulatory domain updated:
[ 3567.561009] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3567.561012] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3567.561014] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3567.561015] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3567.561017] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3567.561018] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3568.935491] wlan0: authenticate with 9c:d6:43:37:81:fa
[ 3568.961364] wlan0: send auth to 9c:d6:43:37:81:fa (try 1/3)
[ 3568.963451] wlan0: authenticated
[ 3568.967148] wlan0: associate with 9c:d6:43:37:81:fa (try 1/3)
[ 3568.977666] wlan0: RX AssocResp from 9c:d6:43:37:81:fa (capab=0x411 status=0 aid=3)
[ 3568.977914] wlan0: associated
[ 3760.579155] wlan0: Connection to AP 9c:d6:43:37:81:fa lost
[ 3760.631279] cfg80211: Calling CRDA to update world regulatory domain
[ 3760.633554] cfg80211: World regulatory domain updated:
[ 3760.633556] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3760.633558] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3760.633560] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3760.633561] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3760.633562] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3760.633563] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3762.013610] wlan0: authenticate with 9c:d6:43:37:81:fa
[ 3762.038897] wlan0: send auth to 9c:d6:43:37:81:fa (try 1/3)
[ 3762.040350] wlan0: authenticated
[ 3762.040526] wlan0: associate with 9c:d6:43:37:81:fa (try 1/3)
[ 3762.052176] wlan0: RX AssocResp from 9c:d6:43:37:81:fa (capab=0x411 status=0 aid=3)
[ 3762.052423] wlan0: associated
[ 4132.191609] wlan0: Connection to AP 9c:d6:43:37:81:fa lost
[ 4132.255729] cfg80211: Calling CRDA to update world regulatory domain
[ 4132.259107] cfg80211: World regulatory domain updated:
[ 4132.259111] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4132.259115] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4132.259118] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4132.259121] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4132.259123] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4132.259126] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4133.629814] wlan0: authenticate with 9c:d6:43:37:81:fa
[ 4133.655292] wlan0: send auth to 9c:d6:43:37:81:fa (try 1/3)
[ 4133.656781] wlan0: authenticated
[ 4133.660937] wlan0: associate with 9c:d6:43:37:81:fa (try 1/3)
[ 4133.672468] wlan0: RX AssocResp from 9c:d6:43:37:81:fa (capab=0x411 status=0 aid=3)
[ 4133.672727] wlan0: associated
[ 4866.903750] wlan0: Connection to AP 9c:d6:43:37:81:fa lost
[ 4866.960038] cfg80211: Calling CRDA to update world regulatory domain
[ 4866.965952] cfg80211: World regulatory domain updated:
[ 4866.965959] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4866.965964] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4866.965968] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4866.965971] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4866.965974] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4866.965977] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4868.341478] wlan0: authenticate with 9c:d6:43:37:81:fa
[ 4868.367384] wlan0: send auth to 9c:d6:43:37:81:fa (try 1/3)
[ 4868.368770] wlan0: authenticated
[ 4868.369133] wlan0: associate with 9c:d6:43:37:81:fa (try 1/3)
[ 4868.379431] wlan0: RX AssocResp from 9c:d6:43:37:81:fa (capab=0x411 status=0 aid=3)
[ 4868.379651] wlan0: associated
[ 6165.296914] wlan0: Connection to AP 9c:d6:43:37:81:fa lost
[ 6165.349053] cfg80211: Calling CRDA to update world regulatory domain
[ 6165.355023] cfg80211: World regulatory domain updated:
[ 6165.355030] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 6165.355035] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6165.355040] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6165.355043] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6165.355046] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6165.355049] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6166.731059] wlan0: authenticate with 9c:d6:43:37:81:fa
[ 6166.756639] wlan0: send auth to 9c:d6:43:37:81:fa (try 1/3)
[ 6166.758789] wlan0: authenticated
[ 6166.762268] wlan0: associate with 9c:d6:43:37:81:fa (try 1/3)
[ 6166.771885] wlan0: RX AssocResp from 9c:d6:43:37:81:fa (capab=0x411 status=0 aid=2)
[ 6166.772131] wlan0: associated
[ 6169.575164] PM: Syncing filesystems ... done.
[ 6169.740707] PM: Preparing system for mem sleep
[ 6169.740857] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 6169.742483] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 6169.743598] PM: Entering mem sleep
[ 6169.743781] Suspending console(s) (use no_console_suspend to debug)
[ 6170.097354] nouveau E[   PIBUS][0000:01:00.0] GPC0: 0x4188ac 0x00000001 (0x1870822e)
[ 6170.100125] wlan0: deauthenticating from 9c:d6:43:37:81:fa by local choice (reason=3)
[ 6170.150008] cfg80211: Calling CRDA to update world regulatory domain
[ 6170.150096] sd 4:0:0:0: [sda] Synchronizing SCSI cache
[ 6170.150193] sd 4:0:0:0: [sda] Stopping disk
[ 6170.172049] nouveau  [     DRM] evicting buffers...
[ 6170.172050] nouveau  [     DRM] waiting for kernel channels to go idle...
[ 6170.172051] nouveau  [     DRM] suspending client object trees...
[ 6170.172054] nouveau  [     DRM] suspending kernel object tree...
[ 6170.172405] mei_me 0000:00:16.0: H_RDY is not cleared 0x80181818
[ 6171.223985] PM: suspend of devices complete after 1122.735 msecs
[ 6171.238768] PM: late suspend of devices complete after 14.765 msecs
[ 6171.254804] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 6171.258773] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 6171.266679] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 6171.270722] PM: noirq suspend of devices complete after 31.920 msecs
[ 6171.271035] ACPI: Preparing to enter system sleep state S3
[ 6171.271180] PM: Saving platform NVS memory
[ 6171.273629] Disabling non-boot CPUs ...
[ 6171.274903] kvm: disabling virtualization on CPU1
[ 6171.275212] smpboot: CPU 1 is now offline
[ 6171.276639] kvm: disabling virtualization on CPU2
[ 6171.378767] smpboot: CPU 2 is now offline
[ 6171.380223] kvm: disabling virtualization on CPU3
[ 6171.482869] smpboot: CPU 3 is now offline
[ 6171.484316] kvm: disabling virtualization on CPU4
[ 6171.586975] smpboot: CPU 4 is now offline
[ 6171.587406] Broke affinity for irq 42
[ 6171.588411] kvm: disabling virtualization on CPU5
[ 6171.691079] smpboot: CPU 5 is now offline
[ 6171.691477] Broke affinity for irq 16
[ 6171.691493] Broke affinity for irq 23
[ 6171.691495] Broke affinity for irq 43
[ 6171.692498] kvm: disabling virtualization on CPU6
[ 6171.795183] smpboot: CPU 6 is now offline
[ 6171.795576] Broke affinity for irq 17
[ 6171.796590] kvm: disabling virtualization on CPU7
[ 6171.899286] smpboot: CPU 7 is now offline
[ 6171.901045] ACPI: Low-level resume complete
[ 6171.901084] PM: Restoring platform NVS memory
[ 6171.902078] Enabling non-boot CPUs ...
[ 6171.902119] x86: Booting SMP configuration:
[ 6171.902120] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 6171.914297] kvm: enabling virtualization on CPU1
[ 6171.916711] CPU1 is up
[ 6171.916731] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 6171.928932] kvm: enabling virtualization on CPU2
[ 6171.931318] CPU2 is up
[ 6171.931336] smpboot: Booting Node 0 Processor 3 APIC 0x6
[ 6171.943556] kvm: enabling virtualization on CPU3
[ 6171.945918] CPU3 is up
[ 6171.945936] smpboot: Booting Node 0 Processor 4 APIC 0x1
[ 6171.958158] kvm: enabling virtualization on CPU4
[ 6171.960527] CPU4 is up
[ 6171.960543] smpboot: Booting Node 0 Processor 5 APIC 0x3
[ 6171.972701] kvm: enabling virtualization on CPU5
[ 6171.975057] CPU5 is up
[ 6171.975071] smpboot: Booting Node 0 Processor 6 APIC 0x5
[ 6171.987246] kvm: enabling virtualization on CPU6
[ 6171.989616] CPU6 is up
[ 6171.989633] smpboot: Booting Node 0 Processor 7 APIC 0x7
[ 6172.001829] kvm: enabling virtualization on CPU7
[ 6172.004175] CPU7 is up
[ 6172.013317] ACPI: Waking up from system sleep state S3
[ 6172.057928] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 6172.065943] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 6172.073948] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 6172.122075] PM: noirq resume of devices complete after 88.329 msecs
[ 6172.122184] PM: early resume of devices complete after 0.088 msecs
[ 6172.122247] mei_me 0000:00:16.0: irq 46 for MSI/MSI-X
[ 6172.122273] nouveau  [     DRM] re-enabling device...
[ 6172.122292] nouveau  [     DRM] resuming kernel object tree...
[ 6172.122298] nouveau  [   VBIOS][0000:01:00.0] running init tables
[ 6172.122300] rtlwifi: wireless switch is on
[ 6172.122304] snd_hda_intel 0000:00:03.0: irq 47 for MSI/MSI-X
[ 6172.122502] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[ 6172.165037] nouveau E[   PIBUS][0000:01:00.0] GPC0: 0x4188ac 0x00000001 (0x1c70822e)
[ 6172.167686] nouveau  [    VOLT][0000:01:00.0] GPU voltage: 600000uv
[ 6172.167688] nouveau  [  PTHERM][0000:01:00.0] fan management: automatic
[ 6172.167762] nouveau  [     CLK][0000:01:00.0] --: core 405 MHz memory 405 MHz
[ 6172.167770] nouveau  [     DRM] resuming client object trees...
[ 6172.220601] dpm_run_callback(): pnp_bus_resume+0x0/0xa0 returns -19
[ 6172.220601] PM: Device 00:0a failed to resume: error -19
[ 6172.442486] usb 3-7: reset full-speed USB device number 4 using xhci_hcd
[ 6172.446307] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6172.456125] ata1.00: configured for UDMA/100
[ 6172.458908] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880223d08900
[ 6172.458909] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880223d08940
[ 6172.458910] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880223d08980
[ 6172.458911] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880035a58980
[ 6172.458911] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880035a589c0
[ 6173.995836] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 6174.472304] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 6174.606443] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
[ 6174.606446] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT4._GTF] (Node ffff8802240fbe10), AE_NOT_FOUND (20131115/psparse-536)
[ 6174.607132] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
[ 6174.607135] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT4._GTF] (Node ffff8802240fbe10), AE_NOT_FOUND (20131115/psparse-536)
[ 6174.607273] ata5.00: configured for UDMA/133
[ 6174.620495] sd 4:0:0:0: [sda] Starting disk
[ 6175.015590] PM: resume of devices complete after 2890.505 msecs
[ 6175.016111] PM: Finishing wakeup.
[ 6175.016112] Restarting tasks ... done.
[ 6175.019169] cfg80211: World regulatory domain updated:
[ 6175.019172] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 6175.019174] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6175.019176] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6175.019177] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6175.019178] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6175.019179] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6175.022167] pci 0000:04:00.0: no hotplug settings from platform
[ 6175.022223] rtl8723ae 0000:05:00.0: no hotplug settings from platform
[ 6175.165085] video LNXVIDEO:00: Restoring backlight state
[ 6175.165088] video LNXVIDEO:01: Restoring backlight state
[ 6175.185048] usb 3-3: new high-speed USB device number 5 using xhci_hcd
[ 6175.458741] usb 3-3: New USB device found, idVendor=0bda, idProduct=0138
[ 6175.458744] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6175.458745] usb 3-3: Product: USB2.0-CRW
[ 6175.458747] usb 3-3: Manufacturer: Generic
[ 6175.458748] usb 3-3: SerialNumber: 20090516388200000
[ 6175.464375] ums-realtek 3-3:1.0: USB Mass Storage device detected
[ 6175.472033] alx 0000:04:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [8c:89:a5:0e:f5:28]
[ 6175.474870] alx 0000:04:00.0: irq 49 for MSI/MSI-X
[ 6175.474955] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6175.475155] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6175.525727] init: anacron main process (3720) killed by TERM signal
[ 6175.729667] scsi6 : usb-storage 3-3:1.0
[ 6175.729844] usb 3-3: USB disconnect, device number 5
[ 6176.406897] wlan0: authenticate with 9c:d6:43:37:81:fa
[ 6176.432600] wlan0: send auth to 9c:d6:43:37:81:fa (try 1/3)
[ 6176.434736] wlan0: authenticated
[ 6176.438302] wlan0: associate with 9c:d6:43:37:81:fa (try 1/3)
[ 6176.447623] wlan0: RX AssocResp from 9c:d6:43:37:81:fa (capab=0x411 status=0 aid=2)
[ 6176.447879] wlan0: associated
[ 6180.029903] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[ 6180.030304] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)


[if]

@KlanimaL, fareyi farklı bir girişe takınca da oluyor mu bu sorun?

Kod Seç Genişlet

uname -a

https://lists.debian.org/debian-kernel/2014/03/msg00153.html

[heartsmagic]

Kubuntu dediğimiz doğru düzgün çalışan Ubuntu'dan bağımsız bir sistem mi yoksa aynı sistem üzerindeki KDE masaüstü mü?
Makinede Optimus var, sürücüleri doğrudan depodan mı kurmaya çalıştın yoksa Bumblebee mi kurdun?

[KlanimaL]

@heartsmagic ubuntu'dan bağımsız bi sistem. sürücu kurmadım herşey çalışıyordu ilk kurduğumda.

@if mouse dediğim mouse imleci hocam touchpd de takılıyordu yani ama mouse alıcısını başka bi yere takmayı denemedim onla alakalı olacağını düşünmedim

zaten problem çözüldü. 4-5 gün önce büyük bi sistem güncelleştirmesi geldi ondan beri hiç olmadı düzeldi herhalde. güncelleştirme ile gelen paketler ekte.



[eklenti yönetici tarafından silindi]

[if]

Çözülmüş en azından:) Konuyu kapatalım.