[Çözüldü] Vodafone Vodem K4201 ile internete bağlanamıyorum.

[yağmuradam]

   Xubuntu 12.04 LTS üzerinde, Vodafone'dan aldığım Vodem K4201 ile ne yaparsam yapayım, yaklaşık bir haftadan beri internete bağlanamıyorum. Modem üzerinde sürekli yeşil ışık yanıp sönüyor. Vodafone'un çağrı merkezlerindeki, müşteri temsilcileri ve teknik servis elemanları ve Vodafone şubelerindeki kişiler, Linux konusunda son derece yetersiz olduğu için ne yapacağımı bilemiyorum. Hiçbir yerden yardım alamıyorum. Vodem K4201 ile internete bağlanmayı başaran ve Bursa'da ikamet eden bir arkadaşım bana acil yardım ederse çok sevinirim.

[ekremsenturk]

Vodafone web sayfasına gir, Vodem sürücüsünü ara, Linux için olanı seç, yönlendirileceğin sayfadan son sürümünü kur. (Toplam üç dosyadan oluşması gerekiyor ve kurulumu belli bir sıralamada yapman gerekiyor(du))

[if]

http://kb.ubuntu-tr.net/ag-komutlari

Çıktılarını alayım.

[yağmuradam]

  ekremsenturk;
Birkaç gün önce;

Kod Seç Genişlet

http://developer.vodafone.com/labs/opensource/linux-connection-manager/operating-systems/ubuntu-linux-setup/
sayfasına girip;

Kod Seç Genişlet

ubuntu.tgz
dosyasını indirip, içindeki dosyaları kurmaya çalıştım. Fakat;

Kod Seç Genişlet

sudo dpkg -i usb-modeswitch_0.9.7_i386.deb
sudo dpkg -i ozerocdoff_0.4-2_i386.deb
sudo dpkg -i vodafone-mobile-connect_2.20.01-1_all.deb
komutlarından, sadece ikinci komutta paketin kurulduğuna dair yanıt alabildim, diğer iki komut hata mesajı verdi. Forumumuza şu anda sadece internet kafeden ulaşabiliyorum. Xubuntu yüklü olan evdeki bilgisayarımda şu anda internet olmadığı için, komutlara verilen yanıtları buraya yazamıyorum. Birinci komutta belirtilen;

Kod Seç Genişlet

usb-modeswitch
paketi sistemimde önceden kurulu idi.

Kod Seç Genişlet

sudo aptitude install wvdial hal usb-modeswitch ozerocdoff python-twisted python-serial python-sqlite python-tz python-gobject python-dbus python-cairo python-crypto python-gtk2 python-gnome2 python-gnome2-extras lsb-release python-glade2
komutunda belirtilen bağımlılık paketlerini kuramadığım için, üçüncü komuta da hata mesajı aldım.

  if;
Şu anda evdeki bilgisayarımda internet olmadığı için vermiş olduğunuz komutlara yanıt alamıyorum.

Bursa'da ikamet edip, bana yardımcı olabilecek bir arkadaşım, bana ulaşabilirse çok memnun olurum.

[ekremsenturk]

                                      https://forge.betavine.net/frs/?group_id=12

Bu sayfadan Ubuntu/Debian paketlerinin kendi donanımına uygun olanlarını indir ve kur. Sayfaya girişte güvenlik sertifikasının desteklenmediği yazabilir. Sayfa güvenlidir.

[burak öztürk]

Huawei markası Linux sürücüsünü içinde barındırıyor. Ama Zte markalar Linux sürücüleriyle gelmiyor.

[if]

@yağmuradam, en azından aygıt takılı iken

Kod Seç Genişlet

lsusb çıktısını alıp buraya geçin bir şekilde.

@ekremşentürk, Vodafone'un yönlendirdiği bağlantıdaki usbmodeswitch paketi eski bir sürüm. Zaten bu paketleri kurmaya gerek olmadığını düşünüyorum. Bu iş bir udev kuralı oluşturmakla yapılabilir diye düşünüyorum.

[ekremsenturk]

@if, doğrudur, usb modeswitch sürümü eski. (sonradan fark ettim) Usb_modeswitch'i kendi sayfasından son sürümü ile kurmak, sorunu giderir. Ama Vodafone Mobile Connect, ek olarak kullanılan veri akışını ayarlayarak sürekli gözetimde tutabilmeyi ve SMS çekebilme ve alınanları görüntüleyebilme imkânıda tanıyor.

[if]

@ekremsenturk, o tür artıları varsa kurmak faydalıdır o zaman.

@yağmuradam, paketlerin kurulumunu uç birimde yapın. Çıktılarını kopyalayıp bir metin belgesine kopyalayın. O metin belgelerini de bir parmak belleğe atarak internete bağlanan bir bilgisayar aracılığıyla buraya aktarın. Çıktıları görmeden kurulumun neden başarılı olmadığını bilemeyiz. Vodafone'un sağladığı usb_modeswitch'i kurma yalnız. Ubuntu'daki güncel paket onun işini görecektir. ozerocdoff ve vodafone-mobile-connect paketlerini kurmaya çalışın.

[baranbarlas]

Bi arkadasimin basina gelmisti ag baglantilarindan mobil ekleme yaparak duzeltmistim herhangi bir yazilim yuklemek zorunda kalmamistim ama eger imkaniniz varsa bi yakininizin internetini kullanarak guncrlleme yapin

[yağmuradam]

   Bir süredir size cevap yazamadığım için kusuruma bakmayın, özür dilerim. Son bir haftayı yeni bir eve taşınmak için harcadım. Sizin anlayacağınız şu anda evin her yeri karmakarışık.
   if;
   Aynen sizin yazdığınız gibi yapıp, Vodem K4201 Xubuntu üzerinde takılı iken komutları verip, bir ofis belgesi aracılığı ile size ulaştırıyorum. İnşallah bir çözüm yolu bulacağız.
   Komutlara karşılık elde ettiğim yanıtları aşağıya yapıştırıyorum. Tam üç haftadır Xubuntu üzerinden 3G ile internete bağlanamıyorum.

   

Kod Seç Genişlet

cat /etc/lsb-release
komutunun yanıtı;
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=12.04
DISTRIB_CODENAME=precise
DISTRIB_DESCRIPTION="Ubuntu 12.04.3 LTS"

uname -a
komutunun yanıtı;
Linux mangrove 3.2.0-52-generic #78-Ubuntu SMP Fri Jul 26 16:23:24 UTC 2013 i686 i686 i386 GNU/Linux

lspci
komutunun yanıtı;
00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)
00:01.0 PCI bridge: Intel Corporation 82865G/PE/P AGP Bridge (rev 02)
00:06.0 System peripheral: Intel Corporation 82865G/PE/P Processor to I/O Memory Interface (rev 02)
00:1d.0 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02)
00:1d.3 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02)
00:1d.7 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)
00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
01:00.0 VGA compatible controller: NVIDIA Corporation NV20 [GeForce3 Ti 200] (rev a3)
02:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
02:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 02)
02:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 02)
02:0c.0 Communication controller: LSI Corporation 56k WinModem (rev 01)

lsusb
komutunun yanıtı;
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 12d1:1576 Huawei Technologies Co., Ltd.

sudo lshw -C network
komutunun yanıtı;
  *-network               
       description: Ethernet interface
       product: RTL-8139/8139C/8139C+
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 5
       bus info: pci@0000:02:05.0
       logical name: eth0
       version: 10
       serial: 00:13:d4:3d:24:06
       size: 10Mbit/s
       capacity: 100Mbit/s
       width: 32 bits
       clock: 33MHz
       capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=half latency=64 link=no maxlatency=64 mingnt=32 multicast=yes port=MII speed=10Mbit/s
       resources: irq:22 ioport:d800(size=256) memory:feaffc00-feaffcff
  *-network
       description: Ethernet interface
       physical id: 1
       logical name: eth1
       serial: 58:2c:80:13:92:63
       capabilities: ethernet physical
       configuration: broadcast=yes driver=cdc_ether driverversion=22-Aug-2005 firmware=CDC Ethernet Device link=yes multicast=yes

ifconfig
komutunun yanıtı;
eth0      Link encap:Ethernet  HWaddr 00:13:d4:3d:24:06   
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:22 Base address:0xd800

eth1      Link encap:Ethernet  HWaddr 58:2c:80:13:92:63   
          inet6 addr: fe80::5a2c:80ff:fe13:9263/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:12 errors:0 dropped:0 overruns:0 frame:0
          TX packets:25 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:3821 (3.8 KB)  TX bytes:5225 (5.2 KB)

lo        Link encap:Local Loopback   
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:12 errors:0 dropped:0 overruns:0 frame:0
          TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:792 (792.0 B)  TX bytes:792 (792.0 B)

iwconfig
komutunun yanıtı;
lo        no wireless extensions.

eth1      no wireless extensions.

eth0      no wireless extensions.

iwlist scanning
komutunun yanıtı;
lo        Interface doesn't support scanning.

eth1      Interface doesn't support scanning.

eth0      Interface doesn't support scanning.

Lsmod
komutunun yanıtı;
Module                  Size  Used by
cdc_ether              13312  0
usbnet                 25214  1 cdc_ether
isofs                  39553  0
usb_storage            39646  0
vesafb                 13516  1
snd_intel8x0           33455  3
snd_ac97_codec        110213  1 snd_intel8x0
ac97_bus               12642  1 snd_ac97_codec
snd_pcm                80916  2 snd_intel8x0,snd_ac97_codec
nvidia               4708655  22
snd_seq_midi           13132  0
snd_rawmidi            25424  1 snd_seq_midi
snd_seq_midi_event     14475  1 snd_seq_midi
snd_seq                51592  2 snd_seq_midi,snd_seq_midi_event
tuner_simple           18151  1
tuner_types            18998  1 tuner_simple
snd_timer              28931  2 snd_pcm,snd_seq
snd_seq_device         14172  3 snd_seq_midi,snd_rawmidi,snd_seq
tuner                  26836  1
snd                    62218  13 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
tvaudio                32496  0
psmouse                96744  0
tda7432                13070  0
msp3400                35698  0
ir_lirc_codec          12739  0
lirc_dev               18700  1 ir_lirc_codec
bttv                  113035  0
ir_mce_kbd_decoder     12681  0
ir_sony_decoder        12462  0
ir_jvc_decoder         12459  0
ir_rc6_decoder         12459  0
ir_rc5_decoder         12459  0
soundcore              14635  1 snd
i2c_algo_bit           13199  1 bttv
serio_raw              13027  0
videobuf_dma_sg        18786  1 bttv
videobuf_core          25409  2 bttv,videobuf_dma_sg
ir_nec_decoder         12459  0
btcx_risc              13400  1 bttv
rc_core                21263  8 ir_lirc_codec,ir_mce_kbd_decoder,bttv,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,ir_nec_decoder
tveeprom               17009  1 bttv
snd_page_alloc         14115  2 snd_intel8x0,snd_pcm
v4l2_common            15793  5 tuner,tvaudio,tda7432,msp3400,bttv
videodev               86588  6 tuner,tvaudio,tda7432,msp3400,bttv,v4l2_common
bnep                   17830  2
rfcomm                 38139  4
bluetooth             158447  8 bnep,rfcomm
parport_pc             32114  0
ppdev                  12849  0
binfmt_misc            17292  1
mac_hid                13077  0
shpchp                 32265  0
lp                     17455  0
parport                40930  3 parport_pc,ppdev,lp
8139too                23283  0
8139cp                 22633  0
floppy                 60184  0

dmesg
komutunun yanıtı;
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-52-generic (buildd@batsu) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #78-Ubuntu SMP Fri Jul 26 16:23:24 UTC 2013 (Ubuntu 3.2.0-52.78-generic 3.2.48)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
[    0.000000]  BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffba0000 - 0000000100000000 (reserved)
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[    0.000000] SMBIOS 2.3 present.
[    0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./P4P800-X, BIOS 080009   09/15/2005
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x3ffb0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-DFFFF uncachable
[    0.000000]   E0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [c00ff780] ff780
[    0.000000] initial memory mapped : 0 - 01c00000
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 1bf8000-1c00000
[    0.000000] RAMDISK: 364de000 - 37267000
[    0.000000] ACPI: RSDP 000faca0 00014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 3ffb0000 00030 (v01 A M I  OEMRSDT  09000515 MSFT 00000097)
[    0.000000] ACPI: FACP 3ffb0200 00081 (v02 A M I  OEMFACP  09000515 MSFT 00000097)
[    0.000000] ACPI: DSDT 3ffb03f0 0376B (v01  AH004 AH004001 00000001 INTL 02002026)
[    0.000000] ACPI: FACS 3ffc0000 00040
[    0.000000] ACPI: APIC 3ffb0390 0005C (v01 A M I  OEMAPIC  09000515 MSFT 00000097)
[    0.000000] ACPI: OEMB 3ffc0040 0003F (v01 A M I  OEMBIOS  09000515 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 135MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0003ffb0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0003ffb0
[    0.000000] On node 0 totalpages: 261951
[    0.000000] free_area_init_node: node 0, pgdat c1829d40, node_mem_map f5cde200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 272 pages used for memmap
[    0.000000]   HighMem zone: 34466 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
[    0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bfba0000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 13 pages/cpu @f77dc000 s31616 r0 d21632 u53248
[    0.000000] pcpu-alloc: s31616 r0 d21632 u53248 alloc=13*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259903
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-52-generic root=UUID=d360477d-dd3d-4b74-a911-342d70997fcc ro nomodeset quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 4192768 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:0003ffb0)
[    0.000000] Memory: 1010676k/1048256k available (5635k kernel code, 37128k reserved, 2773k data, 716k init, 138952k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc1837000 - 0xc18ea000   ( 716 kB)
[    0.000000]       .data : 0xc1580f44 - 0xc1836480   (2773 kB)
[    0.000000]       .text : 0xc1000000 - 0xc1580f44   (5635 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:2304 nr_irqs:512 16
[    0.000000] CPU 0 irqstacks, hard=f5808000 soft=f580a000
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1700.003 MHz processor.
[    0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3400.00 BogoMIPS (lpj=6800012)
[    0.004015] pid_max: default: 32768 minimum: 301
[    0.004063] Security Framework initialized
[    0.004105] AppArmor: AppArmor initialized
[    0.004111] Yama: becoming mindful.
[    0.008040] Mount-cache hash table entries: 512
[    0.008344] Initializing cgroup subsys cpuacct
[    0.008358] Initializing cgroup subsys memory
[    0.008379] Initializing cgroup subsys devices
[    0.008384] Initializing cgroup subsys freezer
[    0.008390] Initializing cgroup subsys blkio
[    0.008408] Initializing cgroup subsys perf_event
[    0.008467] CPU0: Hyper-Threading is disabled
[    0.008475] mce: CPU supports 4 MCE banks
[    0.008494] CPU0: Thermal monitoring enabled (TM1)
[    0.008903] SMP alternatives: switching to UP code
[    0.026938] ACPI: Core revision 20110623
[    0.031421] ftrace: allocating 25514 entries in 50 pages
[    0.036127] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.036504] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.078090] CPU0: Intel(R) Pentium(R) 4 CPU 1.70GHz stepping 02
[    0.080004] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[    0.080004] ... version:                0
[    0.080004] ... bit width:              40
[    0.080004] ... generic registers:      18
[    0.080004] ... value mask:             000000ffffffffff
[    0.080004] ... max period:             0000007fffffffff
[    0.080004] ... fixed-purpose events:   0
[    0.080004] ... event mask:             000000000003ffff
[    0.080004] NMI watchdog enabled, takes one hw-pmu counter.
[    0.080004] Brought up 1 CPUs
[    0.080004] Total of 1 processors activated (3400.00 BogoMIPS).
[    0.080004] devtmpfs: initialized
[    0.080004] EVM: security.selinux
[    0.080004] EVM: security.SMACK64
[    0.080004] EVM: security.capability
[    0.080004] PM: Registering ACPI NVS region at 3ffc0000 (196608 bytes)
[    0.080391] print_constraints: dummy:
[    0.080439] RTC time:  0:00:27, date: 01/01/02
[    0.080531] NET: Registered protocol family 16
[    0.080820] EISA bus registered
[    0.080895] ACPI: bus type pci registered
[    0.081127] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
[    0.081133] PCI: Using configuration type 1 for base access
[    0.084162] bio: create slab <bio-0> at 0
[    0.084418] ACPI: Added _OSI(Module Device)
[    0.084428] ACPI: Added _OSI(Processor Device)
[    0.084433] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.084438] ACPI: Added _OSI(Processor Aggregator Device)
[    0.085736] ACPI: EC: Look up EC in DSDT
[    0.087588] ACPI: Executed 1 blocks of module-level executable AML code
[    0.092021] ACPI: Interpreter enabled
[    0.092051] ACPI: (supports S0 S1 S3 S4 S5)
[    0.092105] ACPI: Using IOAPIC for interrupt routing
[    0.103750] ACPI: No dock devices found.
[    0.103757] HEST: Table not found.
[    0.103769] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.103954] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.104355] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.104363] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.104369] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.104375] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xffefffff] (ignored)
[    0.104404] pci 0000:00:00.0: [8086:2570] type 0 class 0x000600
[    0.104412] pci 0000:00:00.0: Enabling MCH 'Overflow' Device
[    0.104430] pci 0000:00:00.0: reg 10: [mem 0xf8000000-0xfbffffff pref]
[    0.104540] pci 0000:00:01.0: [8086:2571] type 1 class 0x000604
[    0.104606] pci 0000:00:06.0: [8086:2576] type 0 class 0x000880
[    0.104625] pci 0000:00:06.0: reg 10: [mem 0xfecf0000-0xfecf0fff]
[    0.104748] pci 0000:00:1d.0: [8086:24d2] type 0 class 0x000c03
[    0.104811] pci 0000:00:1d.0: reg 20: [io  0xef00-0xef1f]
[    0.104866] pci 0000:00:1d.1: [8086:24d4] type 0 class 0x000c03
[    0.104929] pci 0000:00:1d.1: reg 20: [io  0xef20-0xef3f]
[    0.104981] pci 0000:00:1d.2: [8086:24d7] type 0 class 0x000c03
[    0.105043] pci 0000:00:1d.2: reg 20: [io  0xef40-0xef5f]
[    0.105097] pci 0000:00:1d.3: [8086:24de] type 0 class 0x000c03
[    0.105159] pci 0000:00:1d.3: reg 20: [io  0xef80-0xef9f]
[    0.105226] pci 0000:00:1d.7: [8086:24dd] type 0 class 0x000c03
[    0.105258] pci 0000:00:1d.7: reg 10: [mem 0xfebffc00-0xfebfffff]
[    0.105385] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.105395] pci 0000:00:1d.7: PME# disabled
[    0.105422] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[    0.105485] pci 0000:00:1f.0: [8086:24d0] type 0 class 0x000601
[    0.105574] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    0.105585] pci 0000:00:1f.0: Enabled i801 SMBus device
[    0.105619] pci 0000:00:1f.1: [8086:24db] type 0 class 0x000101
[    0.105641] pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
[    0.105658] pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
[    0.105674] pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
[    0.105689] pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
[    0.105704] pci 0000:00:1f.1: reg 20: [io  0xfc00-0xfc0f]
[    0.105720] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
[    0.105765] pci 0000:00:1f.3: [8086:24d3] type 0 class 0x000c05
[    0.105828] pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
[    0.105885] pci 0000:00:1f.5: [8086:24d5] type 0 class 0x000401
[    0.105909] pci 0000:00:1f.5: reg 10: [io  0xe800-0xe8ff]
[    0.105926] pci 0000:00:1f.5: reg 14: [io  0xee80-0xeebf]
[    0.105941] pci 0000:00:1f.5: reg 18: [mem 0xfebff800-0xfebff9ff]
[    0.105957] pci 0000:00:1f.5: reg 1c: [mem 0xfebff400-0xfebff4ff]
[    0.106024] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[    0.106031] pci 0000:00:1f.5: PME# disabled
[    0.106076] pci 0000:01:00.0: [10de:0201] type 0 class 0x000300
[    0.106101] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
[    0.106115] pci 0000:01:00.0: reg 14: [mem 0xe8000000-0xefffffff pref]
[    0.106129] pci 0000:01:00.0: reg 18: [mem 0xf7d80000-0xf7dfffff pref]
[    0.106167] pci 0000:01:00.0: reg 30: [mem 0xfe9f0000-0xfe9fffff pref]
[    0.106259] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.106270] pci 0000:00:01.0:   bridge window [mem 0xfc900000-0xfe9fffff]
[    0.106278] pci 0000:00:01.0:   bridge window [mem 0xe7d00000-0xf7dfffff pref]
[    0.106330] pci 0000:02:05.0: [10ec:8139] type 0 class 0x000200
[    0.106356] pci 0000:02:05.0: reg 10: [io  0xd800-0xd8ff]
[    0.106373] pci 0000:02:05.0: reg 14: [mem 0xfeaffc00-0xfeaffcff]
[    0.106461] pci 0000:02:05.0: supports D1 D2
[    0.106465] pci 0000:02:05.0: PME# supported from D1 D2 D3hot D3cold
[    0.106473] pci 0000:02:05.0: PME# disabled
[    0.106501] pci 0000:02:0a.0: [109e:036e] type 0 class 0x000400
[    0.106522] pci 0000:02:0a.0: reg 10: [mem 0xf7efe000-0xf7efefff pref]
[    0.106609] pci 0000:02:0a.1: [109e:0878] type 0 class 0x000480
[    0.106630] pci 0000:02:0a.1: reg 10: [mem 0xf7eff000-0xf7efffff pref]
[    0.106734] pci 0000:02:0c.0: [11c1:0442] type 0 class 0x000780
[    0.106759] pci 0000:02:0c.0: reg 10: [mem 0xfeaff800-0xfeaff8ff]
[    0.106777] pci 0000:02:0c.0: reg 14: [io  0xdff0-0xdff7]
[    0.106792] pci 0000:02:0c.0: reg 18: [io  0xd400-0xd4ff]
[    0.106870] pci 0000:02:0c.0: supports D2
[    0.106874] pci 0000:02:0c.0: PME# supported from D2 D3hot D3cold
[    0.106881] pci 0000:02:0c.0: PME# disabled
[    0.106922] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)
[    0.106930] pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
[    0.106940] pci 0000:00:1e.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.106949] pci 0000:00:1e.0:   bridge window [mem 0xf7e00000-0xf7efffff pref]
[    0.106955] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.106961] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[    0.106982] pci_bus 0000:00: on NUMA node 0
[    0.106990] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.107208] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[    0.107560]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[    0.112538] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.112667] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.112792] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.112914] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.113038] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.113161] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.113287] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.113411] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.113697] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.113708] vgaarb: loaded
[    0.113712] vgaarb: bridge control possible 0000:01:00.0
[    0.114009] i2c-core: driver [aat2870] using legacy suspend method
[    0.114014] i2c-core: driver [aat2870] using legacy resume method
[    0.114234] SCSI subsystem initialized
[    0.114359] libata version 3.00 loaded.
[    0.114489] usbcore: registered new interface driver usbfs
[    0.114518] usbcore: registered new interface driver hub
[    0.114590] usbcore: registered new device driver usb
[    0.114836] PCI: Using ACPI for IRQ routing
[    0.114847] PCI: pci_cache_line_size set to 64 bytes
[    0.114962] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[    0.114968] reserve RAM buffer: 000000003ffb0000 - 000000003fffffff
[    0.115212] NetLabel: Initializing
[    0.115218] NetLabel:  domain hash size = 128
[    0.115222] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.115246] NetLabel:  unlabeled traffic allowed by default
[    0.115559] hpet clockevent registered
[    0.115567] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.115576] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.115586] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.120119] Switching to clocksource hpet
[    0.139547] AppArmor: AppArmor Filesystem Enabled
[    0.139611] pnp: PnP ACPI init
[    0.139649] ACPI: bus type pnp registered
[    0.139872] pnp 00:00: [bus 00-ff]
[    0.139879] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.139885] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.139890] pnp 00:00: [io  0x0d00-0xffff window]
[    0.139896] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.139901] pnp 00:00: [mem 0x00000000 window]
[    0.139906] pnp 00:00: [mem 0x40000000-0xffefffff window]
[    0.140052] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.140146] pnp 00:01: [dma 4]
[    0.140151] pnp 00:01: [io  0x0000-0x000f]
[    0.140156] pnp 00:01: [io  0x0081-0x0083]
[    0.140161] pnp 00:01: [io  0x0087]
[    0.140165] pnp 00:01: [io  0x0089-0x008b]
[    0.140170] pnp 00:01: [io  0x008f]
[    0.140174] pnp 00:01: [io  0x00c0-0x00df]
[    0.140250] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.140279] pnp 00:02: [io  0x0070-0x0071]
[    0.140298] pnp 00:02: [irq 8]
[    0.140366] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.140390] pnp 00:03: [io  0x0061]
[    0.140460] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.140484] pnp 00:04: [io  0x00f0-0x00ff]
[    0.140496] pnp 00:04: [irq 13]
[    0.140567] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.141284] pnp 00:05: [irq 6]
[    0.141291] pnp 00:05: [dma 0 disabled]
[    0.141296] pnp 00:05: [io  0x03f0-0x03f5]
[    0.141301] pnp 00:05: [io  0x03f7]
[    0.141456] pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.142485] pnp 00:06: [io  0x0000-0xffffffff disabled]
[    0.142492] pnp 00:06: [io  0x0680-0x06ff]
[    0.142496] pnp 00:06: [io  0x0290-0x0297]
[    0.142624] system 00:06: [io  0x0680-0x06ff] has been reserved
[    0.142631] system 00:06: [io  0x0290-0x0297] has been reserved
[    0.142639] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.142902] pnp 00:07: [io  0x0010-0x001f]
[    0.142907] pnp 00:07: [io  0x0022-0x003f]
[    0.142912] pnp 00:07: [io  0x0044-0x005f]
[    0.142917] pnp 00:07: [io  0x0062-0x0063]
[    0.142921] pnp 00:07: [io  0x0065-0x006f]
[    0.142926] pnp 00:07: [io  0x0072-0x007f]
[    0.142930] pnp 00:07: [io  0x0080]
[    0.142934] pnp 00:07: [io  0x0084-0x0086]
[    0.142939] pnp 00:07: [io  0x0088]
[    0.142943] pnp 00:07: [io  0x008c-0x008e]
[    0.142948] pnp 00:07: [io  0x0090-0x009f]
[    0.142952] pnp 00:07: [io  0x00a2-0x00bf]
[    0.142956] pnp 00:07: [io  0x00e0-0x00ef]
[    0.142961] pnp 00:07: [io  0x04d0-0x04d1]
[    0.142965] pnp 00:07: [io  0x0800-0x087f]
[    0.142970] pnp 00:07: [io  0x0400-0x041f]
[    0.142974] pnp 00:07: [io  0x0480-0x04bf]
[    0.142980] pnp 00:07: [mem 0xfed20000-0xfed8ffff]
[    0.142985] pnp 00:07: [mem 0xffb00000-0xffbfffff]
[    0.143133] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    0.143140] system 00:07: [io  0x0800-0x087f] has been reserved
[    0.143146] system 00:07: [io  0x0400-0x041f] has been reserved
[    0.143152] system 00:07: [io  0x0480-0x04bf] has been reserved
[    0.143159] system 00:07: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.143166] system 00:07: [mem 0xffb00000-0xffbfffff] could not be reserved
[    0.143173] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.143396] pnp 00:08: [mem 0xfec00000-0xfec00fff]
[    0.143402] pnp 00:08: [mem 0xfee00000-0xfee00fff]
[    0.143514] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.143522] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.143529] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.143616] pnp 00:09: [io  0x0060]
[    0.143621] pnp 00:09: [io  0x0064]
[    0.143638] pnp 00:09: [irq 1]
[    0.143741] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.143869] pnp 00:0a: [irq 12]
[    0.143966] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    0.144626] pnp 00:0b: [irq 3]
[    0.144632] pnp 00:0b: [dma 0 disabled]
[    0.144638] pnp 00:0b: [io  0x02f8-0x02ff]
[    0.144813] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.145444] pnp 00:0c: [io  0x03f8-0x03ff]
[    0.145459] pnp 00:0c: [irq 4]
[    0.145646] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.146953] pnp 00:0d: [mem 0x00000000-0x0009ffff]
[    0.146960] pnp 00:0d: [mem 0x000c0000-0x000dffff]
[    0.146965] pnp 00:0d: [mem 0x000e0000-0x000fffff]
[    0.146970] pnp 00:0d: [mem 0x00100000-0x3ffeffff]
[    0.146975] pnp 00:0d: [mem 0xfff00000-0xffffffff]
[    0.147117] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.147125] system 00:0d: [mem 0x000c0000-0x000dffff] could not be reserved
[    0.147131] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.147138] system 00:0d: [mem 0x00100000-0x3ffeffff] could not be reserved
[    0.147145] system 00:0d: [mem 0xfff00000-0xffffffff] has been reserved
[    0.147153] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.147486] pnp: PnP ACPI: found 14 devices
[    0.147491] ACPI: ACPI bus type pnp unregistered
[    0.147499] PnPBIOS: Disabled by ACPI PNP
[    0.186843] PCI: max bus depth: 1 pci_try_num: 2
[    0.186879] pci 0000:00:1f.1: BAR 5: assigned [mem 0x40000000-0x400003ff]
[    0.186891] pci 0000:00:1f.1: BAR 5: set to [mem 0x40000000-0x400003ff] (PCI address [0x40000000-0x400003ff])
[    0.186899] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.186911] pci 0000:00:01.0:   bridge window [mem 0xfc900000-0xfe9fffff]
[    0.186920] pci 0000:00:01.0:   bridge window [mem 0xe7d00000-0xf7dfffff pref]
[    0.186934] pci 0000:00:1e.0: PCI bridge to [bus 02-02]
[    0.186942] pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
[    0.186952] pci 0000:00:1e.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.186960] pci 0000:00:1e.0:   bridge window [mem 0xf7e00000-0xf7efffff pref]
[    0.186992] pci 0000:00:1e.0: setting latency timer to 64
[    0.187001] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.187007] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[    0.187013] pci_bus 0000:01: resource 1 [mem 0xfc900000-0xfe9fffff]
[    0.187018] pci_bus 0000:01: resource 2 [mem 0xe7d00000-0xf7dfffff pref]
[    0.187024] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.187029] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.187035] pci_bus 0000:02: resource 2 [mem 0xf7e00000-0xf7efffff pref]
[    0.187040] pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
[    0.187045] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[    0.187123] NET: Registered protocol family 2
[    0.187250] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.187777] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.188696] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.189141] TCP: Hash tables configured (established 131072 bind 65536)
[    0.189147] TCP reno registered
[    0.189158] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.189177] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.189376] NET: Registered protocol family 1
[    0.189452] pci 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.189479] pci 0000:00:1d.0: PCI INT A disabled
[    0.189503] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.189525] pci 0000:00:1d.1: PCI INT B disabled
[    0.189547] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.189570] pci 0000:00:1d.2: PCI INT C disabled
[    0.189584] pci 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.189606] pci 0000:00:1d.3: PCI INT A disabled
[    0.189628] pci 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    0.189671] pci 0000:00:1d.7: PCI INT D disabled
[    0.189713] pci 0000:01:00.0: Boot video device
[    0.189734] PCI: CLS 0 bytes, default 64
[    0.190411] audit: initializing netlink socket (disabled)
[    0.190433] type=2000 audit(1009843226.188:1): initialized
[    0.226160] Trying to unpack rootfs image as initramfs...
[    0.269087] highmem bounce pool size: 64 pages
[    0.269102] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.277069] VFS: Disk quotas dquot_6.5.2
[    0.277209] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.278533] fuse init (API version 7.17)
[    0.278783] msgmni has been set to 1702
[    0.292678] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.292761] io scheduler noop registered
[    0.292767] io scheduler deadline registered
[    0.292790] io scheduler cfq registered (default)
[    0.293127] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.293177] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.293524] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.293537] ACPI: Power Button [PWRB]
[    0.293644] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.293654] ACPI: Power Button [PWRF]
[    0.297596] ERST: Table is not found!
[    0.297603] GHES: HEST is not enabled!
[    0.300761] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.321231] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.321296] isapnp: Scanning for PnP cards...
[    0.413164] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.505275] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.545099] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.608650] Linux agpgart interface v0.103
[    0.608886] agpgart-intel 0000:00:00.0: Intel 865 Chipset
[    0.616410] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
[    0.628656] brd: module loaded
[    0.630486] loop: module loaded
[    0.630847] ata_piix 0000:00:1f.1: version 2.13
[    0.630870] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[    0.630884] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.630959] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.631693] scsi0 : ata_piix
[    0.631887] scsi1 : ata_piix
[    0.635479] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[    0.635487] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[    0.641290] Fixed MDIO Bus: probed
[    0.641350] tun: Universal TUN/TAP device driver, 1.6
[    0.641356] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.641663] PPP generic driver version 2.4.2
[    0.641919] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.641971] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    0.642005] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.642013] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.642126] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.642176] ehci_hcd 0000:00:1d.7: debug port 1
[    0.646068] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    0.646106] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebffc00
[    0.668481] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.668885] hub 1-0:1.0: USB hub found
[    0.668899] hub 1-0:1.0: 8 ports detected
[    0.669082] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.669120] uhci_hcd: USB Universal Host Controller Interface driver
[    0.669174] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.669193] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.669200] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.669349] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.669411] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ef00
[    0.669748] hub 2-0:1.0: USB hub found
[    0.669760] hub 2-0:1.0: 2 ports detected
[    0.669904] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.669922] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.669929] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.670062] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.670122] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ef20
[    0.670443] hub 3-0:1.0: USB hub found
[    0.670455] hub 3-0:1.0: 2 ports detected
[    0.670597] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.670614] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.670621] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.670741] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.670800] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ef40
[    0.671131] hub 4-0:1.0: USB hub found
[    0.671143] hub 4-0:1.0: 2 ports detected
[    0.671289] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.671307] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.671313] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.676629] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.676679] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ef80
[    0.677070] hub 5-0:1.0: USB hub found
[    0.677083] hub 5-0:1.0: 2 ports detected
[    0.677367] usbcore: registered new interface driver libusual
[    0.677480] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    0.723268] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.723284] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.800838] ata2.00: ATAPI: HL-DT-ST GCE-8526B, 1.02, max UDMA/33
[    0.800851] ata2.01: ATAPI: HL-DT-STDVD-ROM GDR8163B, 0L15, max UDMA/33
[    0.804827] ata1.00: ATA-5: ST360021A, 3.19, max UDMA/100
[    0.804835] ata1.00: 117231408 sectors, multi 16: LBA
[    0.808888] ata2.00: configured for UDMA/33
[    0.813440] ata1.00: configured for UDMA/100
[    0.816957] mousedev: PS/2 mouse device common for all mice
[    0.817308] rtc_cmos 00:02: RTC can wake from S4
[    0.817491] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.817531] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[    0.817720] device-mapper: uevent: version 1.0.3
[    0.817925] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    0.817983] EISA: Probing bus 0 at eisa.0
[    0.818034] EISA: Detected 0 cards.
[    0.818055] cpufreq-nforce2: No nForce2 chipset.
[    0.818061] cpuidle: using governor ladder
[    0.818065] cpuidle: using governor menu
[    0.818069] EFI Variables Facility v0.08 2004-May-17
[    0.818590] TCP cubic registered
[    0.818868] NET: Registered protocol family 10
[    0.820094] NET: Registered protocol family 17
[    0.865913] ata2.01: configured for UDMA/33
[    0.953304] isapnp: No Plug & Play device found
[    0.953549] scsi 0:0:0:0: Direct-Access     ATA      ST360021A        3.19 PQ: 0 ANSI: 5
[    0.953938] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.954149] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
[    0.954284] sd 0:0:0:0: [sda] Write Protect is off
[    0.954291] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.954346] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.954997] Registering the dns_resolver key type
[    0.955066] Using IPI No-Shortcut mode
[    0.960534] PM: Hibernation image not present or could not be loaded.
[    0.960564] registered taskstats version 1
[    0.980978]  sda: sda1 sda2 sda3 sda4
[    0.981857] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.009405] scsi 1:0:0:0: CD-ROM            HL-DT-ST CD-RW GCE-8526B  1.02 PQ: 0 ANSI: 5
[    1.010969] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    1.012173] hub 1-0:1.0: over-current condition on port 7
[    1.013009] sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
[    1.013019] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.013335] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.013669] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.019924] scsi 1:0:1:0: CD-ROM            HL-DT-ST DVD-ROM GDR8163B 0L15 PQ: 0 ANSI: 5
[    1.024260] sr1: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[    1.024572] sr 1:0:1:0: Attached scsi CD-ROM sr1
[    1.024865] sr 1:0:1:0: Attached scsi generic sg2 type 5
[    1.188140] Refined TSC clocksource calibration: 1700.060 MHz.
[    1.188153] Switching to clocksource tsc
[    1.220099] hub 1-0:1.0: over-current condition on port 8
[    1.404946] Freeing initrd memory: 13860k freed
[    1.428118] hub 5-0:1.0: over-current condition on port 1
[    1.437792]   Magic number: 2:0:0
[    1.437938] rtc_cmos 00:02: setting system clock to 2002-01-01 00:00:28 UTC (1009843228)
[    1.437974] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.437978] EDD information not available.
[    1.438278] Freeing unused kernel memory: 716k freed
[    1.439121] Write protecting the kernel text: 5636k
[    1.439198] Write protecting the kernel read-only data: 2332k
[    1.494615] udevd[85]: starting version 175
[    1.636090] hub 5-0:1.0: over-current condition on port 2
[    1.886747] Floppy drive(s): fd0 is 1.44M
[    1.906171] FDC 0 is a post-1991 82077
[    1.949826] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    1.949869] 8139cp 0000:02:05.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[    1.951035] 8139too: 8139too Fast Ethernet driver 0.9.28
[    1.951117] 8139too 0000:02:05.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    1.991597] 8139too 0000:02:05.0: eth0: RealTek RTL8139 at 0xd800, 00:13:d4:3d:24:06, IRQ 22
[    7.336492] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[   22.766532] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   22.827738] udevd[298]: starting version 175
[   22.947072] lp: driver loaded but no devices found
[   23.328389] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[   23.335954] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   23.696833] intel_rng: FWH not detected
[   24.069926] nvidia: module license 'NVIDIA' taints kernel.
[   24.069934] Disabling lock debugging due to kernel taint
[   24.135145] ppdev: user-space parallel port driver
[   24.185109] Bluetooth: Core ver 2.16
[   24.185258] NET: Registered protocol family 31
[   24.185264] Bluetooth: HCI device and connection manager initialized
[   24.185270] Bluetooth: HCI socket layer initialized
[   24.185274] Bluetooth: L2CAP socket layer initialized
[   24.185290] Bluetooth: SCO socket layer initialized
[   24.264098] Bluetooth: RFCOMM TTY layer initialized
[   24.264113] Bluetooth: RFCOMM socket layer initialized
[   24.264118] Bluetooth: RFCOMM ver 1.11
[   24.276546] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   24.276554] Bluetooth: BNEP filters: protocol multicast
[   24.391220] type=1400 audit(1009843251.447:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=548 comm="apparmor_parser"
[   24.405447] type=1400 audit(1009843251.463:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=548 comm="apparmor_parser"
[   24.658480] Linux video capture interface: v2.00
[   24.813722] IR NEC protocol handler initialized
[   24.829060] IR RC5(x) protocol handler initialized
[   24.845939] IR RC6 protocol handler initialized
[   24.863921] IR JVC protocol handler initialized
[   24.886348] IR Sony protocol handler initialized
[   24.900146] IR MCE Keyboard/mouse protocol handler initialized
[   24.969506] bttv: driver version 0.9.19 loaded
[   24.969515] bttv: using 8 buffers with 2080k (520 pages) each for capture
[   24.973317] bttv: Bt8xx card found (0)
[   24.973343] bttv 0000:02:0a.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   24.973366] bttv: 0: Bt878 (rev 2) at 0000:02:0a.0, irq: 22, latency: 64, mmio: 0xf7efe000
[   24.976394] bttv: 0: detected: FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner [card=36], PCI subsystem ID is 1852:1852
[   24.976404] bttv: 0: using: Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner [card=36,autodetected]
[   24.980967] type=1400 audit(1009843252.039:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=602 comm="apparmor_parser"
[   24.985429] type=1400 audit(1009843252.043:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=602 comm="apparmor_parser"
[   24.985989] type=1400 audit(1009843252.043:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=602 comm="apparmor_parser"
[   24.988606] lirc_dev: IR Remote Control driver registered, major 251
[   24.989233] IR LIRC bridge handler initialized
[   24.989692] bttv: 0: FlyVideo Radio=yes RemoteControl=yes Tuner=5 gpio=0xe4ff00
[   24.989700] bttv: 0: FlyVideo  LR90=no tda9821/tda9820=no capture_only=no
[   24.989706] bttv: 0: tuner type=5
[   25.308374] i2c-core: driver [msp3400] using legacy suspend method
[   25.308381] i2c-core: driver [msp3400] using legacy resume method
[   25.496296] bttv: 0: audio absent, no audio device found!
[   25.519242] i2c-core: driver [tuner] using legacy suspend method
[   25.519250] i2c-core: driver [tuner] using legacy resume method
[   25.607835] tuner 0-0061: Tuner -1 found with type(s) Radio TV.
[   25.630258] tuner-simple 0-0061: creating new instance
[   25.630268] tuner-simple 0-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
[   25.631176] bttv: 0: registered device video0
[   25.631386] bttv: 0: registered device vbi0
[   25.631566] bttv: 0: registered device radio0
[   25.631593] bttv: 0: Setting PLL: 28636363 => 35468950 (needs up to 100ms)
[   25.660571] bttv: PLL set ok
[   25.947192] psmouse serio1: hgpk: ID: 10 00 64
[   26.543097] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
[   27.197679] init: failsafe main process (701) killed by TERM signal
[   27.345002] snd_intel8x0 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   27.345060] snd_intel8x0 0000:00:1f.5: setting latency timer to 64
[   27.975480] type=1400 audit(1009843255.031:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=819 comm="apparmor_parser"
[   27.994200] type=1400 audit(1009843255.051:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=819 comm="apparmor_parser"
[   28.019881] type=1400 audit(1009843255.075:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=820 comm="apparmor_parser"
[   28.042372] type=1400 audit(1009843255.099:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=820 comm="apparmor_parser"
[   28.042942] type=1400 audit(1009843255.099:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=820 comm="apparmor_parser"
[   28.089957] 8139too 0000:02:05.0: eth0: link down
[   28.092610] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   28.100463] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   28.202156] intel8x0_measure_ac97_clock: measured 59818 usecs (2881 samples)
[   28.202164] intel8x0: clocking to 48000
[   28.567958] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   28.567977] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   28.589668] NVRM: loading NVIDIA Linux x86 Kernel Module  96.43.23  Fri Aug 31 14:52:31 PDT 2012
[   28.752239] vesafb: mode is 640x480x32, linelength=2560, pages=0
[   28.752246] vesafb: scrolling: redraw
[   28.752254] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[   28.752846] vesafb: framebuffer at 0xe8000000, mapped to 0xf8200000, using 1216k, total 1216k
[   28.754403] fbcon: VESA VGA (fb0) is primary device
[   28.754547] Console: switching to colour frame buffer device 80x30
[   28.754576] fb0: VESA VGA frame buffer device
[   32.002087] agpgart-intel 0000:00:00.0: AGP 3.0 bridge
[   32.002113] agpgart-intel 0000:00:00.0: bridge is in legacy mode, falling back to 2.x
[   32.002127] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[   32.002183] nvidia 0000:01:00.0: putting AGP V2 device into 4x mode
[  164.108035] usb 1-5: new high-speed USB device number 2 using ehci_hcd
[  164.275287] Initializing USB Mass Storage driver...
[  164.275515] scsi2 : usb-storage 1-5:1.0
[  164.275712] usbcore: registered new interface driver usb-storage
[  164.275718] USB Mass Storage support registered.
[  165.272889] scsi 2:0:0:0: CD-ROM            Vodafone Storage(Huawei)  2.31 PQ: 0 ANSI: 2
[  165.283995] sr2: scsi-1 drive
[  165.284612] sr 2:0:0:0: Attached scsi CD-ROM sr2
[  165.284893] sr 2:0:0:0: Attached scsi generic sg3 type 5
[  165.847906] ISO 9660 Extensions: RRIP_1991A
[  165.915057] init: ureadahead-other main process (1613) terminated with status 2
[  168.065433] usb 1-5: USB disconnect, device number 2
[  169.140081] usb 1-5: new high-speed USB device number 3 using ehci_hcd
[  169.398345] cdc_ether 1-5:1.0: eth1: register 'cdc_ether' at usb-0000:00:1d.7-5, CDC Ethernet Device, 58:2c:80:13:92:63
[  169.401078] usbcore: registered new interface driver cdc_ether

dmesg | tail
komutunun yanıtı;
[  165.272889] scsi 2:0:0:0: CD-ROM            Vodafone Storage(Huawei)  2.31 PQ: 0 ANSI: 2
[  165.283995] sr2: scsi-1 drive
[  165.284612] sr 2:0:0:0: Attached scsi CD-ROM sr2
[  165.284893] sr 2:0:0:0: Attached scsi generic sg3 type 5
[  165.847906] ISO 9660 Extensions: RRIP_1991A
[  165.915057] init: ureadahead-other main process (1613) terminated with status 2
[  168.065433] usb 1-5: USB disconnect, device number 2
[  169.140081] usb 1-5: new high-speed USB device number 3 using ehci_hcd
[  169.398345] cdc_ether 1-5:1.0: eth1: register 'cdc_ether' at usb-0000:00:1d.7-5, CDC Ethernet Device, 58:2c:80:13:92:63
[  169.401078] usbcore: registered new interface driver cdc_ether

şeklinde oluyor.

   Bir kez daha yazacağım ama, Bursa'da ikamet edip de, bana yardımcı olabilecek bir arkadaşım varsa, lütfen benimle bağlantıya geçerse çok sevineceğim.

[if]

@yağmuradam,

Kod Seç Genişlet

wget https://dl.dropboxusercontent.com/u/84994792/VMB%2010.3.401.43721(k4201).rar
unrar x VMB\ 10.3.401.43721\(k4201\).rar
cd VMB\ 10.3.401.43721\(k4201\)/
sudo chmod +x install
sudo ./install

kurulumu sonrası aygıtı takınca ağ bağğlantılarında görünüyor mu?

http://192.168.9.1 ya da http://VodafoneMobile.vmb  adreslerinden birine girince durum nedir?

https://forum.vodafone.ro/t5/Modemuri-internet/Huawei-K4201/td-p/84790
http://parliamodi-ubuntu.blogspot.it/2011/12/internet-key-onda-k3806-z-su-archbang-e.html

[yağmuradam]

    if;
    Şu anda size bu mesajı, Xubuntu üzerinden yazıyorum. Yazmış olduğunuz adresteki;
   

Kod Seç Genişlet

VMB 10.3.401.43721(k4201).rar
dosyasını indirip, vermiş olduğunuz komutları uygulayıp;
   

Kod Seç Genişlet

install
dosyasını kurdum. Şu anda Vodem K4201 üzerindeki ışık, devamlı yeşil olarak yanıyor. Xubuntu menüsü altındaki "Internet" altmenüsü içinde "Vodafone Mobile Connect" ifadesine tıkladığımda, ne yazık ki hiçbir şey açılmıyor. Yani "Vodafone Mobile Connect" programı çalışmıyor.
    Yazmış olduğunuz;
   

Kod Seç Genişlet

http://192.168.9.1
sayfasına bağlandığımda "Vodafone QuickStart" sayfası açılıyor. Sayfanın sağ tarafında "Mobile Number" bölümünde SIM kartımın bağlantı numaram gözüküyor. "Status" bölümünde "Connected" ifadesi gözüküyor. "Network" bölümünde "Vodafone TR EDGE" ifadesi yazıyor. Yani sizin anlayacağınız İnternete 3G ile değil de, EDGE ile bağlanıyorum. Tabii ki hızı çok düşük.
   Yazmış olduğunuz;
   

Kod Seç Genişlet

http://VodafoneMobile.vmb
adresine bağlandığımda "OpenDNS Guide" bana bir sürü site ismi veriyor. Yani sonuç hiçbir yere varmıyor.
   Şu anda "Network Connections" bağlantı ayarlarında, bağlantı türü olarak "Mobile Broadband" değil de, "Wired Connection" yani kablolu bağlantı olarak gözüküyor.
   Bundan sonra nasıl bir yol izleyebiliriz?
   

[ekremsenturk]

Oturduğun bölgede Vodafone'un 3G hizmeti olmadığından EDGE ile bağlanıyorsun. Vodafone'un 3G hizmet verdiği bir konuma gittiğinde, İnternet hızın da otomatik olarak artar.

[yağmuradam]

  ekremsenturk;
  Evimin bulunduğum bölgede Vodafone'un 3G hizmeti var. Yeğenimin dizüstü bilgisayarı ve Vodem ile benim evimden rahatlıkla 3G bağlantı sağlanabiliyor.
  Bu arada bana yardımcı olabilecek, Bursa'da oturan ve Ubuntu kullanan hiçbir arkadaşım yok mu? Bursa'da tek Ubuntu kullanan benmişim gibi hissetmeye başladım.

[ekremsenturk]

http://www.draisberghof.de/usb_modeswitch/

Bu adresten usb_modeswitch'in son sürümünü indir ve el ile, sayfada anlatılan, veya dosya içinde anlatılan şekilde kur ve Yazılım Merkezinden'de wvdial paketini kur, modemmanager'i kur ve ardından Ubuntu'nun Network-Manager'inden (ağ yöneticisi) bağlantı ayarlarını yap ve ağ yöneticisinden bağlanmayı dene. (usb_modeswitch için de bazı ayarlar yapılması gerekebilir, yardım bölümünü dikkatlice oku)

[if]

@yağmuradam, maalesef bu aygıt için başka çözüm bulamadım fakat usb-modeswitch örneklerine bakarak doğaçlama bir şey yapabiliriz.

[yağmuradam]

    ekremsenturk;
  Vermiş olduğunuz linkteki "usb-modeswitch" paketini kurdum. Tavsiye ettiğiniz diğer paketler olan "wvdial" ve "modemmanager" paketleri, Synaptic içinde zaten kurulu olarak gözüküyordu. Şu anda 3G bağlantısının yavaş olması dışında herhangi bir problem yok. Daha önceden kullandığım ve iptal ettiğim Türksat'a ait 1Mb'lik kablo internette web sayfaları çok daha hızlı geliyordu. 3G üzerinde bazen bağlantının sıfıra düşmesi de ayrı bir handikap. Maalesef 3G bağlantı hızı umduğum gibi çıkmadı. Tek tesellim şu anda 3G üzerinden internete bağlanıyor olmam.

   if;
  Yazmış olduğunuz;

 

Kod Seç Genişlet

http://192.168.9.1

web sayfasındaki bazı ayarları değiştirerek, sonunda 3G hızında internete bağlanmayı başarabildim. Fakat yukarıda belirttiğim gibi 3G'nin bağlantı hızı tahminlerimin çok gerisinde kaldı. Belirttiğim "Vodafone QuickStart" web sayfasında, ayarlarda hangi değişikliği yaptığımı aşağıya yazıyorum. Benim durumumdaki diğer arkadaşlarıma yardımı dokunur İnşallah.
  Öncelikle sizin vermiş olduğunuz;

 

Kod Seç Genişlet

http://192.168.9.1

web sayfasına girdiğimizde kırmızı ile yazan;

 

Kod Seç Genişlet

Quick Start

sekmesinin hemen sağ alt tarafında;

 

Kod Seç Genişlet

Settings

ifadesine tıkladığımızda;

 

Kod Seç Genişlet

Mobile Broadband connection status

bölümünde;

 

Kod Seç Genişlet

3G Only(Change)

ifadesindeki;

 

Kod Seç Genişlet

Change

üzerine tıklıyoruz. Açılan;

 

Kod Seç Genişlet

Network settings

bölümünde;

 

Kod Seç Genişlet

Connection Type

altında;

 

Kod Seç Genişlet

3G Only

ifadesini seçip, "Save" butonuna tıklıyoruz. Hemen altındaki;

 

Kod Seç Genişlet

Preferred Network

altında "Search" butonuna tıklayıp, arama sonucunda çıkan sonuçlardan;

 

Kod Seç Genişlet

Vodafone TR 3G - Current

ifadesini seçip, "Save" butonuna tıklıyoruz. Belli bir işleme tabi tutulduktan sonra, bizim ağ tercihimiz;

 

Kod Seç Genişlet

Preferred Network

bölümü altında;

 

Kod Seç Genişlet

Manual Vodafone TR 3G

ifadesi olarak gözüküyor. Hemen ardından otomatik olarak 3G bağlantımız sağlanıyor.
   
  ekremsenturk ve if;
  Her ikinize ve ilgilenen diğer arkadaşlarıma çok teşekkür ederim. Sağ olun, var olun.

[akifguzen]

Takip ettiğim bir konuydu. Sorunun halledilmesine sevindim.

http://forum.ubuntu-tr.net/index.php?topic=31789.0