[Çözüldü] avea jet modem(mf627) ubuntu 13.10 gnome ile internete çıkamıyorum

Başlatan yali, 08 Şubat 2014 - 19:49:50

« önceki - sonraki »

0 Üyeler ve 1 Ziyaretçi konuyu incelemekte.

yali

merhaba,,arkdaşlar avea jet modem ile internete bağlanmaya çalışıyorum. network ayarlarıyla ilgili bir problem görünmüyor fakat tarayıcıyı açıp da bağlanmaya çalıştığımda tarayıcının bağlantı simgesi dönüyor da dönüyor..webe çıkamıyorum.  Ubuntu 13.04 te sorunsuz bağlanabiliyordum.problem ubuntu 13.10 ile mi ilgili acaba? internete
avea telefon ile bağlantı kurarken de aynı sıkıntıyı yaşıyorum, fakat uğraş uğraş bağlanabiliyorum...güncellemeleri yükledim. konu hakkında bilgisi olan veya aynı problemi yaşayan var mı?

avea jet modem ile gelen programı yüklerken de şu hatayı alıyorum:
This software will not run until you install "QT3 Runtime Library". You can refer to Operaing System installation CD or Homepage to find out the QT3 Runtime Library installation package. This installation process will not continue until you install QT3 Runtime Library first.

gnome da qt3 kurulabilir mi kde mi kurmam gerekiyor?

teşekkürler

if


yali

kurmaya çalıştığım uygulama avea jet mobil modem ile gelen uygulama..cihaz ve bağlantı yönetimi arayüzü galiba..kuramadığım için ne işe yaradığını tam bilmiyorum install.sh dosyasından kurmaya çalışıyorum..

13.04 te network connections dan ekleyerek internete çıkabiliyordum

çıktılar ; 

yali@yali-hp:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=13.10
DISTRIB_CODENAME=saucy
DISTRIB_DESCRIPTION="Ubuntu 13.10"
yali@yali-hp:~$ uname -a
Linux yali-hp 3.11.0-15-generic #25-Ubuntu SMP Thu Jan 30 17:22:01 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux
yali@yali-hp:~$ lspci
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05)
00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 05)
00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 05)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 05)
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Robson CE [Radeon HD 6370M/7370M]
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Cedar HDMI Audio [Radeon HD 5400/6300 Series]
44:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)
45:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 03)
ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
yali@yali-hp:~$ lsusb
Bus 002 Device 019: ID 19d2:0031 ZTE WCDMA Technologies MSM MF110/MF627/MF636
Bus 002 Device 003: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0461:4db6 Primax Electronics, Ltd
Bus 001 Device 020: ID 0fce:714f Sony Ericsson Mobile Communications AB
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
yali@yali-hp:~$ rfkill list
0: hp-wifi: Wireless LAN
Soft blocked: no
Hard blocked: yes
1: hp-bluetooth: Bluetooth
Soft blocked: no
Hard blocked: yes
2: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
3: brcmwl-0: Wireless LAN
Soft blocked: no
Hard blocked: yes
yali@yali-hp:~$ sudo lshw -C network
  *-network DISABLED     
       description: Wireless interface
       product: BCM4313 802.11bgn Wireless Network Adapter
       vendor: Broadcom Corporation
       physical id: 0
       bus info: pci@0000:44:00.0
       logical name: eth1
       version: 01
       serial: cc:52:af:58:ee:c9
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
       configuration: broadcast=yes driver=wl0 driverversion=6.30.223.141 (r415941) latency=0 multicast=yes wireless=IEEE 802.11abg
       resources: irq:19 memory:d0300000-d0303fff
  *-network
       description: Ethernet interface
       product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:45:00.0
       logical name: eth0
       version: 03
       serial: 64:31:50:12:bc:5b
       size: 10Mbit/s
       capacity: 1Gbit/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl_nic/rtl8168d-2.fw latency=0 link=no multicast=yes port=MII speed=10Mbit/s
       resources: irq:46 ioport:2000(size=256) memory:d0004000-d0004fff memory:d0000000-d0003fff memory:d0020000-d003ffff
  *-network:0
       description: Ethernet interface
       physical id: 2
       logical name: usb0
       serial: 46:86:62:cd:5e:be
       capabilities: ethernet physical
       configuration: broadcast=yes driver=rndis_host driverversion=22-Aug-2005 firmware=RNDIS device ip=192.168.42.165 link=yes multicast=yes
  *-network:1 DISABLED
       description: Ethernet interface
       physical id: 3
       logical name: wwan0
       serial: 5a:b9:fa:33:4b:99
       capabilities: ethernet physical
       configuration: broadcast=yes driver=qmi_wwan driverversion=22-Aug-2005 firmware=WWAN/QMI device link=no multicast=yes
yali@yali-hp:~$ ifconfig
eth0      Link encap:Ethernet  HWaddr 64:31:50:12:bc:5b 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:10493 errors:0 dropped:0 overruns:0 frame:0
          TX packets:10493 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:1046260 (1.0 MB)  TX bytes:1046260 (1.0 MB)

ppp0      Link encap:Point-to-Point Protocol 
          inet addr:10.81.73.218  P-t-P:10.64.64.64  Mask:255.255.255.255
          UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1500  Metric:1
          RX packets:48 errors:0 dropped:0 overruns:0 frame:0
          TX packets:94 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:3
          RX bytes:4697 (4.6 KB)  TX bytes:6916 (6.9 KB)

usb0      Link encap:Ethernet  HWaddr 46:86:62:cd:5e:be 
          inet addr:192.168.42.165  Bcast:192.168.42.255  Mask:255.255.255.0
          inet6 addr: fe80::4486:62ff:fecd:5ebe/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:83184 errors:16 dropped:0 overruns:0 frame:16
          TX packets:63397 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:92192908 (92.1 MB)  TX bytes:13105731 (13.1 MB)

yali@yali-hp:~$ iwconfig
usb0      no wireless extensions.

wwan0     no wireless extensions.

ppp0      no wireless extensions.

eth0      no wireless extensions.

eth1      IEEE 802.11abg  ESSID:off/any 
          Mode:Managed  Access Point: Not-Associated   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Power Management:off
         
lo        no wireless extensions.

yali@yali-hp:~$ iwlist scanning
usb0      Interface doesn't support scanning.

wwan0     Interface doesn't support scanning.

ppp0      Interface doesn't support scanning.

eth0      Interface doesn't support scanning.

eth1      Failed to read scan data : Network is down

lo        Interface doesn't support scanning.

yali@yali-hp:~$ lsmod
Module                  Size  Used by
ums_realtek            18029  0
ppp_deflate            12950  0
zlib_deflate           26914  1 ppp_deflate
bsd_comp               12921  0
ppp_async              17413  1
crc_ccitt              12707  1 ppp_async
option                 42468  2
qmi_wwan               21699  0
cdc_wdm                18919  1 qmi_wwan
usb_wwan               20380  1 option
usbserial              44667  7 option,usb_wwan
nls_utf8               12557  1
isofs                  39844  1
usb_storage            62062  2 ums_realtek
rndis_host             14503  0
cdc_ether              14351  1 rndis_host
usbnet                 39525  3 rndis_host,qmi_wwan,cdc_ether
parport_pc             32701  0
ppdev                  17671  0
bnep                   19704  2
rfcomm                 69130  0
bluetooth             372041  10 bnep,rfcomm
intel_powerclamp       14705  0
coretemp               13435  0
lib80211_crypt_tkip    17619  0
wl                   4207760  0
kvm                   431720  0
uvcvideo               80885  0
videobuf2_vmalloc      13216  1 uvcvideo
videobuf2_memops       13362  1 videobuf2_vmalloc
hp_wmi                 14062  0
sparse_keymap          13948  1 hp_wmi
videobuf2_core         40499  1 uvcvideo
videodev              133509  2 uvcvideo,videobuf2_core
snd_hda_codec_hdmi     41117  1
radeon               1402995  3
snd_hda_codec_idt      50341  1
snd_hda_intel          48171  5
snd_hda_codec         188738  3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel
joydev                 17377  0
snd_hwdep              13602  1 snd_hda_codec
snd_pcm               102033  3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc         18710  2 snd_pcm,snd_hda_intel
snd_seq_midi           13324  0
snd_seq_midi_event     14899  1 snd_seq_midi
snd_rawmidi            30095  1 snd_seq_midi
ttm                    84169  1 radeon
snd_seq                61560  2 snd_seq_midi_event,snd_seq_midi
snd_seq_device         14497  3 snd_seq,snd_rawmidi,snd_seq_midi
hp_accel               26012  0
lib80211               14381  2 wl,lib80211_crypt_tkip
lis3lv02d              20156  1 hp_accel
drm_kms_helper         52710  1 radeon
cfg80211              480503  1 wl
snd_timer              29433  2 snd_pcm,snd_seq
drm                   297056  5 ttm,drm_kms_helper,radeon
input_polldev          13896  1 lis3lv02d
i2c_algo_bit           13413  1 radeon
microcode              23576  0
snd                    69141  21 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_idt,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi
soundcore              12680  1 snd
intel_ips              18470  0
psmouse                97655  0
mei_me                 18421  0
mei                    77782  1 mei_me
wmi                    19070  1 hp_wmi
serio_raw              13413  0
lpc_ich                21080  0
video                  19318  0
mac_hid                13205  0
lp                     17759  0
parport                42299  3 lp,ppdev,parport_pc
hid_generic            12548  0
usbhid                 53014  0
hid                   105858  2 hid_generic,usbhid
ahci                   25819  2
r8169                  67581  0
libahci                31928  1 ahci
mii                    13934  2 r8169,usbnet
yali@yali-hp:~$ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.11.0-15-generic (buildd@roseapple) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu8) ) #25-Ubuntu SMP Thu Jan 30 17:22:01 UTC 2014 (Ubuntu 3.11.0-15.25-generic 3.11.10)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-15-generic root=UUID=6a3a0044-4718-44ad-bb6d-88d65ebd18b6 ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000befcefff] usable
[    0.000000] BIOS-e820: [mem 0x00000000befcf000-0x00000000bf6cefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bf6cf000-0x00000000bf7cefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bf7cf000-0x00000000bf7fefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bf7ff000-0x00000000bf7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf800000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed19000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000137ffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: Hewlett-Packard HP ProBook 4520s/1411, BIOS 68AZZ Ver. F.0F 02/18/2011
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x138000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 080000000 mask FC0000000 write-back
[    0.000000]   3 base 100000000 mask FC0000000 write-back
[    0.000000]   4 base 138000000 mask FF8000000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01fd1000, 0x01fd1fff] PGTABLE
[    0.000000] BRK [0x01fd2000, 0x01fd2fff] PGTABLE
[    0.000000] BRK [0x01fd3000, 0x01fd3fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x137e00000-0x137ffffff]
[    0.000000]  [mem 0x137e00000-0x137ffffff] page 2M
[    0.000000] BRK [0x01fd4000, 0x01fd4fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x134000000-0x137dfffff]
[    0.000000]  [mem 0x134000000-0x137dfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x133ffffff]
[    0.000000]  [mem 0x100000000-0x133ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xbefcefff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0xbedfffff] page 2M
[    0.000000]  [mem 0xbee00000-0xbefcefff] page 4k
[    0.000000] init_memory_mapping: [mem 0xbf7ff000-0xbf7fffff]
[    0.000000]  [mem 0xbf7ff000-0xbf7fffff] page 4k
[    0.000000] BRK [0x01fd5000, 0x01fd5fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35eb0000-0x36f4ffff]
[    0.000000] ACPI: RSDP 00000000000fddc0 00024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 00000000bf7fe120 0007C (v01 HPQOEM SLIC-MPC 0000000F      01000013)
[    0.000000] ACPI: FACP 00000000bf7fc000 000F4 (v03 HPQOEM 1411     0000000F HP   00000001)
[    0.000000] ACPI: DSDT 00000000bf7d8000 1EC21 (v02 HPQOEM 1411     00000001 INTL 20060912)
[    0.000000] ACPI: FACS 00000000bf77e000 00040
[    0.000000] ACPI: HPET 00000000bf7fb000 00038 (v01 HPQOEM 1411     00000001 HP   00000001)
[    0.000000] ACPI: APIC 00000000bf7fa000 000BC (v01 HPQOEM 1411     00000001 HP   00000001)
[    0.000000] ACPI: MCFG 00000000bf7f9000 0003C (v01 HPQOEM 1411     00000001 HP   00000001)
[    0.000000] ACPI: ASF! 00000000bf7f8000 000A0 (v32 HPQOEM 1411     00000001 HP   00000001)
[    0.000000] ACPI: SSDT 00000000bf7d5000 00135 (v01 HPQOEM SataAhci 00001000 INTL 20060912)
[    0.000000] ACPI: SSDT 00000000bf7d4000 00314 (v01 HPQOEM PtidDevc 00001000 INTL 20060912)
[    0.000000] ACPI: SSDT 00000000bf7d3000 0005F (v01 HPQOEM   HPQNLP 00000001 INTL 20060912)
[    0.000000] ACPI: SSDT 00000000bf7d2000 00A10 (v01  PmRef    CpuPm 00003000 INTL 20060912)
[    0.000000] ACPI: SSDT 00000000bf7d1000 00288 (v01  PmRef  Cpu0Tst 00003000 INTL 20060912)
[    0.000000] ACPI: SSDT 00000000bf7d0000 00225 (v01  PmRef    ApTst 00003000 INTL 20060912)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x0000000137ffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x137ffffff]
[    0.000000]   NODE_DATA [mem 0x137ff8000-0x137ffcfff]
[    0.000000]  [ffffea0000000000-ffffea0004dfffff] PMD -> [ffff880133800000-ffff8801375fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x137ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xbefcefff]
[    0.000000]   node   0: [mem 0xbf7ff000-0xbf7fffff]
[    0.000000]   node   0: [mem 0x100000000-0x137ffffff]
[    0.000000] On node 0 totalpages: 1011566
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12160 pages used for memmap
[    0.000000]   DMA32 zone: 778192 pages, LIFO batch:31
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 229376 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbefcf000-0xbf6cefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf6cf000-0xbf7cefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf7cf000-0xbf7fefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed18fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed19000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1afff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1b000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
[    0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff880137c00000 s86720 r8192 d23872 u262144
[    0.000000] pcpu-alloc: s86720 r8192 d23872 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 995737
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-15-generic root=UUID=6a3a0044-4718-44ad-bb6d-88d65ebd18b6 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3882184K/4046264K available (7149K kernel code, 1082K rwdata, 3312K rodata, 1364K init, 1420K bss, 164080K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[    0.000000] Offload RCU callbacks from all CPUs
[    0.000000] Offload RCU callbacks from CPUs: 0-255.
[    0.000000] NR_IRQS:16640 nr_irqs:744 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 16252928 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration failed
[    0.008000] tsc: PIT calibration matches HPET. 1 loops
[    0.008000] tsc: Detected 2660.047 MHz processor
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5320.09 BogoMIPS (lpj=10640188)
[    0.000006] pid_max: default: 32768 minimum: 301
[    0.000031] Security Framework initialized
[    0.000051] AppArmor: AppArmor initialized
[    0.000052] Yama: becoming mindful.
[    0.000307] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.001576] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.002141] Mount-cache hash table entries: 256
[    0.002333] Initializing cgroup subsys memory
[    0.002345] Initializing cgroup subsys devices
[    0.002347] Initializing cgroup subsys freezer
[    0.002348] Initializing cgroup subsys blkio
[    0.002350] Initializing cgroup subsys perf_event
[    0.002352] Initializing cgroup subsys hugetlb
[    0.002370] CPU: Physical Processor ID: 0
[    0.002371] CPU: Processor Core ID: 0
[    0.002377] mce: CPU supports 9 MCE banks
[    0.002387] CPU0: Thermal monitoring enabled (TM1)
[    0.002396] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[    0.002396] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[    0.002396] tlb_flushall_shift: 6
[    0.002489] Freeing SMP alternatives memory: 28K (ffffffff81e65000 - ffffffff81e6c000)
[    0.004467] ACPI: Core revision 20130517
[    0.012650] ACPI: All ACPI Tables successfully acquired
[    0.013261] ftrace: allocating 27844 entries in 109 pages
[    0.026261] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.065952] smpboot: CPU0: Intel(R) Core(TM) i5 CPU       M 480  @ 2.67GHz (fam: 06, model: 25, stepping: 05)
[    0.171174] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[    0.171181] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[    0.171183] ... version:                3
[    0.171184] ... bit width:              48
[    0.171185] ... generic registers:      4
[    0.171186] ... value mask:             0000ffffffffffff
[    0.171186] ... max period:             000000007fffffff
[    0.171187] ... fixed-purpose events:   3
[    0.171188] ... event mask:             000000070000000f
[    0.185931] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.172661] smpboot: Booting Node   0, Processors  #1 #2 #3
[    0.212459] Brought up 4 CPUs
[    0.212465] smpboot: Total of 4 processors activated (21280.37 BogoMIPS)
[    0.214923] devtmpfs: initialized
[    0.215826] EVM: security.selinux
[    0.215827] EVM: security.SMACK64
[    0.215828] EVM: security.capability
[    0.215876] PM: Registering ACPI NVS region [mem 0xbf6cf000-0xbf7cefff] (1048576 bytes)
[    0.216722] regulator-dummy: no parameters
[    0.216754] RTC time: 21:52:09, date: 02/07/14
[    0.216787] NET: Registered protocol family 16
[    0.216905] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.216907] ACPI: bus type PCI registered
[    0.216909] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.216969] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.216972] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.230615] PCI: Using configuration type 1 for base access
[    0.230745] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.230746] mtrr: probably your BIOS does not setup all CPUs.
[    0.230747] mtrr: corrected configuration.
[    0.231363] bio: create slab <bio-0> at 0
[    0.231506] ACPI: Added _OSI(Module Device)
[    0.231507] ACPI: Added _OSI(Processor Device)
[    0.231509] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.231510] ACPI: Added _OSI(Processor Aggregator Device)
[    0.233077] ACPI: EC: Look up EC in DSDT
[    0.236555] ACPI: Executed 2 blocks of module-level executable AML code
[    0.243244] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.249066] ACPI: SSDT 00000000bf6c8a18 0047D (v01  PmRef  Cpu0Ist 00003000 INTL 20060912)
[    0.249437] ACPI: Dynamic OEM Table Load:
[    0.249439] ACPI: SSDT           (null) 0047D (v01  PmRef  Cpu0Ist 00003000 INTL 20060912)
[    0.249540] ACPI: SSDT 00000000bf6c6018 008AA (v01  PmRef  Cpu0Cst 00003001 INTL 20060912)
[    0.249897] ACPI: Dynamic OEM Table Load:
[    0.249899] ACPI: SSDT           (null) 008AA (v01  PmRef  Cpu0Cst 00003001 INTL 20060912)
[    0.255427] ACPI: SSDT 00000000bf6c7a98 00303 (v01  PmRef    ApIst 00003000 INTL 20060912)
[    0.255838] ACPI: Dynamic OEM Table Load:
[    0.255840] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20060912)
[    0.259318] ACPI: SSDT 00000000bf6c5d98 00119 (v01  PmRef    ApCst 00003000 INTL 20060912)
[    0.259703] ACPI: Dynamic OEM Table Load:
[    0.259704] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20060912)
[    0.692309] ACPI: Interpreter enabled
[    0.692316] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
[    0.692320] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
[    0.692332] ACPI: (supports S0 S3 S4 S5)
[    0.692334] ACPI: Using IOAPIC for interrupt routing
[    0.692361] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.692485] ACPI: No dock devices found.
[    0.694293] ACPI: Power Resource [APPR] (off)
[    0.702915] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.703613] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[    0.704608] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
[    0.705238] PCI host bridge to bus 0000:00
[    0.705240] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.705242] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.705244] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.705245] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.705246] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
[    0.705248] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff]
[    0.705251] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff]
[    0.705259] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[    0.705276] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[    0.705339] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
[    0.705369] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.705461] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[    0.705489] pci 0000:00:16.0: reg 0x10: [mem 0xd4604000-0xd460400f 64bit]
[    0.705580] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.705666] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[    0.705691] pci 0000:00:1a.0: reg 0x10: [mem 0xd4609000-0xd46093ff]
[    0.705797] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.705843] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.705879] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[    0.705899] pci 0000:00:1b.0: reg 0x10: [mem 0xd4600000-0xd4603fff 64bit]
[    0.705995] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.706042] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.706074] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[    0.706171] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.706246] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[    0.706344] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.706394] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.706425] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
[    0.706523] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.706571] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.706603] pci 0000:00:1c.5: [8086:3b4c] type 01 class 0x060400
[    0.706700] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.706748] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.706786] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[    0.706811] pci 0000:00:1d.0: reg 0x10: [mem 0xd4608000-0xd46083ff]
[    0.706917] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.706963] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.706992] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.707097] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.707127] pci 0000:00:1f.0: [8086:3b0b] type 00 class 0x060100
[    0.707297] pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
[    0.707324] pci 0000:00:1f.2: reg 0x10: [io  0x6028-0x602f]
[    0.707334] pci 0000:00:1f.2: reg 0x14: [io  0x6034-0x6037]
[    0.707345] pci 0000:00:1f.2: reg 0x18: [io  0x6020-0x6027]
[    0.707356] pci 0000:00:1f.2: reg 0x1c: [io  0x6030-0x6033]
[    0.707366] pci 0000:00:1f.2: reg 0x20: [io  0x6000-0x601f]
[    0.707377] pci 0000:00:1f.2: reg 0x24: [mem 0xd4607000-0xd46077ff]
[    0.707442] pci 0000:00:1f.2: PME# supported from D3hot
[    0.707522] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[    0.707549] pci 0000:00:1f.6: reg 0x10: [mem 0xd4606000-0xd4606fff 64bit]
[    0.707730] pci 0000:01:00.0: [1002:68e4] type 00 class 0x030000
[    0.707744] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.707754] pci 0000:01:00.0: reg 0x18: [mem 0xd4500000-0xd451ffff 64bit]
[    0.707761] pci 0000:01:00.0: reg 0x20: [io  0x5000-0x50ff]
[    0.707773] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[    0.707801] pci 0000:01:00.0: supports D1 D2
[    0.707839] pci 0000:01:00.1: [1002:aa68] type 00 class 0x040300
[    0.707853] pci 0000:01:00.1: reg 0x10: [mem 0xd4520000-0xd4523fff 64bit]
[    0.707906] pci 0000:01:00.1: supports D1 D2
[    0.707953] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.707955] pci 0000:00:01.0:   bridge window [io  0x5000-0x5fff]
[    0.707957] pci 0000:00:01.0:   bridge window [mem 0xd4500000-0xd45fffff]
[    0.707960] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.708025] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.708032] pci 0000:00:1c.0:   bridge window [mem 0xd4400000-0xd44fffff]
[    0.708135] pci 0000:00:1c.1: PCI bridge to [bus 03-43]
[    0.708139] pci 0000:00:1c.1:   bridge window [io  0x3000-0x4fff]
[    0.708143] pci 0000:00:1c.1:   bridge window [mem 0xd0400000-0xd43fffff]
[    0.708276] pci 0000:44:00.0: [14e4:4727] type 00 class 0x028000
[    0.708306] pci 0000:44:00.0: reg 0x10: [mem 0xd0300000-0xd0303fff 64bit]
[    0.708473] pci 0000:44:00.0: supports D1 D2
[    0.708509] pci 0000:44:00.0: System wakeup disabled by ACPI
[    0.716525] pci 0000:00:1c.3: PCI bridge to [bus 44]
[    0.716536] pci 0000:00:1c.3:   bridge window [mem 0xd0300000-0xd03fffff]
[    0.716649] pci 0000:45:00.0: [10ec:8168] type 00 class 0x020000
[    0.716667] pci 0000:45:00.0: reg 0x10: [io  0x2000-0x20ff]
[    0.716694] pci 0000:45:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
[    0.716711] pci 0000:45:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
[    0.716723] pci 0000:45:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[    0.716786] pci 0000:45:00.0: supports D1 D2
[    0.716788] pci 0000:45:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.716820] pci 0000:45:00.0: System wakeup disabled by ACPI
[    0.724488] pci 0000:00:1c.5: PCI bridge to [bus 45]
[    0.724495] pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
[    0.724502] pci 0000:00:1c.5:   bridge window [mem 0xd0200000-0xd02fffff]
[    0.724513] pci 0000:00:1c.5:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.724627] pci 0000:00:1e.0: PCI bridge to [bus 46] (subtractive decode)
[    0.724634] pci 0000:00:1e.0:   bridge window [mem 0xd0100000-0xd01fffff]
[    0.724641] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.724642] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.724644] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.724645] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[    0.724647] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfedfffff] (subtractive decode)
[    0.724648] pci 0000:00:1e.0:   bridge window [mem 0xfee01000-0xffffffff] (subtractive decode)
[    0.724679] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[    0.725336] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.725382] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[    0.725426] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.725471] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.725515] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.725559] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.725603] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.725647] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.725689] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[    0.725692] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.725694] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.725746] PCI host bridge to bus 0000:ff
[    0.725748] pci_bus 0000:ff: root bus resource [bus ff]
[    0.725753] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[    0.725787] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[    0.725825] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[    0.725856] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[    0.725887] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[    0.725917] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[    0.726258] ACPI: Enabled 6 GPEs in block 00 to 3F
[    0.726264] ACPI: \_SB_.PCI0: notify handler is installed
[    0.726308] ACPI: \_SB_.CPBG: notify handler is installed
[    0.726318] Found 2 acpi root devices
[    0.726351] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[    0.726445] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.726448] vgaarb: loaded
[    0.726448] vgaarb: bridge control possible 0000:01:00.0
[    0.726591] SCSI subsystem initialized
[    0.726594] ACPI: bus type ATA registered
[    0.726657] libata version 3.00 loaded.
[    0.726672] ACPI: bus type USB registered
[    0.726688] usbcore: registered new interface driver usbfs
[    0.726696] usbcore: registered new interface driver hub
[    0.726716] usbcore: registered new device driver usb
[    0.726811] PCI: Using ACPI for IRQ routing
[    0.736666] PCI: pci_cache_line_size set to 64 bytes
[    0.736724] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.736726] e820: reserve RAM buffer [mem 0xbefcf000-0xbfffffff]
[    0.736727] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
[    0.736808] NetLabel: Initializing
[    0.736810] NetLabel:  domain hash size = 128
[    0.736811] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.736820] NetLabel:  unlabeled traffic allowed by default
[    0.736892] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.736896] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.738923] Switched to clocksource hpet
[    0.743357] AppArmor: AppArmor Filesystem Enabled
[    0.743394] pnp: PnP ACPI init
[    0.743409] ACPI: bus type PNP registered
[    0.743682] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.743684] system 00:00: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.743686] system 00:00: [mem 0xfed1b000-0xfed1bfff] has been reserved
[    0.743687] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.743689] system 00:00: [mem 0xd4700000-0xd4700fff] has been reserved
[    0.743690] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.743692] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.743694] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.743696] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.743699] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.743772] pnp 00:01: [dma 4]
[    0.743793] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.743811] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    0.743859] system 00:03: [io  0xfe00-0xfe0f] has been reserved
[    0.743861] system 00:03: [io  0xfe80-0xfe8f] has been reserved
[    0.743863] system 00:03: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.743865] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.743955] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.743989] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.744023] system 00:06: [io  0x0200-0x027f] has been reserved
[    0.744025] system 00:06: [io  0x1000-0x100f] has been reserved
[    0.744027] system 00:06: [io  0xffff] has been reserved
[    0.744029] system 00:06: [io  0xffff] has been reserved
[    0.744030] system 00:06: [io  0x0400-0x047f] could not be reserved
[    0.744032] system 00:06: [io  0x0500-0x057f] has been reserved
[    0.744034] system 00:06: [io  0xef80-0xef9f] has been reserved
[    0.744036] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.744061] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.744189] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.744215] pnp 00:09: Plug and Play ACPI device, IDs SYN016a SYN0100 SYN0002 PNP0f13 (active)
[    0.744423] pnp 00:0a: Plug and Play ACPI device, IDs HPQ0004 (active)
[    0.744588] pnp: PnP ACPI: found 11 devices
[    0.744589] ACPI: bus type PNP unregistered
[    0.750952] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[    0.750956] pci 0000:45:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[    0.750985] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-43] add_size 200000
[    0.751014] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.751018] pci 0000:00:1c.1: BAR 15: assigned [mem 0xd4800000-0xd49fffff 64bit pref]
[    0.751021] pci 0000:01:00.0: BAR 6: assigned [mem 0xd4540000-0xd455ffff pref]
[    0.751024] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.751026] pci 0000:00:01.0:   bridge window [io  0x5000-0x5fff]
[    0.751028] pci 0000:00:01.0:   bridge window [mem 0xd4500000-0xd45fffff]
[    0.751031] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.751034] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.751040] pci 0000:00:1c.0:   bridge window [mem 0xd4400000-0xd44fffff]
[    0.751049] pci 0000:00:1c.1: PCI bridge to [bus 03-43]
[    0.751052] pci 0000:00:1c.1:   bridge window [io  0x3000-0x4fff]
[    0.751058] pci 0000:00:1c.1:   bridge window [mem 0xd0400000-0xd43fffff]
[    0.751062] pci 0000:00:1c.1:   bridge window [mem 0xd4800000-0xd49fffff 64bit pref]
[    0.751070] pci 0000:00:1c.3: PCI bridge to [bus 44]
[    0.751075] pci 0000:00:1c.3:   bridge window [mem 0xd0300000-0xd03fffff]
[    0.751085] pci 0000:45:00.0: BAR 6: assigned [mem 0xd0020000-0xd003ffff pref]
[    0.751087] pci 0000:00:1c.5: PCI bridge to [bus 45]
[    0.751090] pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
[    0.751095] pci 0000:00:1c.5:   bridge window [mem 0xd0200000-0xd02fffff]
[    0.751100] pci 0000:00:1c.5:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.751107] pci 0000:00:1e.0: PCI bridge to [bus 46]
[    0.751112] pci 0000:00:1e.0:   bridge window [mem 0xd0100000-0xd01fffff]
[    0.751775] pci 0000:00:1e.0: setting latency timer to 64
[    0.751779] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.751781] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.751782] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.751784] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xdfffffff]
[    0.751785] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff]
[    0.751787] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff]
[    0.751789] pci_bus 0000:01: resource 0 [io  0x5000-0x5fff]
[    0.751790] pci_bus 0000:01: resource 1 [mem 0xd4500000-0xd45fffff]
[    0.751792] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.751793] pci_bus 0000:02: resource 1 [mem 0xd4400000-0xd44fffff]
[    0.751795] pci_bus 0000:03: resource 0 [io  0x3000-0x4fff]
[    0.751797] pci_bus 0000:03: resource 1 [mem 0xd0400000-0xd43fffff]
[    0.751798] pci_bus 0000:03: resource 2 [mem 0xd4800000-0xd49fffff 64bit pref]
[    0.751800] pci_bus 0000:44: resource 1 [mem 0xd0300000-0xd03fffff]
[    0.751801] pci_bus 0000:45: resource 0 [io  0x2000-0x2fff]
[    0.751803] pci_bus 0000:45: resource 1 [mem 0xd0200000-0xd02fffff]
[    0.751804] pci_bus 0000:45: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.751805] pci_bus 0000:46: resource 1 [mem 0xd0100000-0xd01fffff]
[    0.751807] pci_bus 0000:46: resource 4 [io  0x0000-0x0cf7]
[    0.751808] pci_bus 0000:46: resource 5 [io  0x0d00-0xffff]
[    0.751810] pci_bus 0000:46: resource 6 [mem 0x000a0000-0x000bffff]
[    0.751811] pci_bus 0000:46: resource 7 [mem 0xc0000000-0xdfffffff]
[    0.751812] pci_bus 0000:46: resource 8 [mem 0xf0000000-0xfedfffff]
[    0.751814] pci_bus 0000:46: resource 9 [mem 0xfee01000-0xffffffff]
[    0.751843] NET: Registered protocol family 2
[    0.752018] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[    0.752179] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.752315] TCP: Hash tables configured (established 32768 bind 32768)
[    0.752347] TCP: reno registered
[    0.752354] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.752374] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.752449] NET: Registered protocol family 1
[    0.753037] pci 0000:01:00.0: Boot video device
[    0.753054] PCI: CLS 64 bytes, default 64
[    0.753098] Trying to unpack rootfs image as initramfs...
[    1.002171] Freeing initrd memory: 17024K (ffff880035eb0000 - ffff880036f50000)
[    1.002179] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.002181] software IO TLB [mem 0xbafcf000-0xbefcf000] (64MB) mapped at [ffff8800bafcf000-ffff8800befcefff]
[    1.002401] Scanning for low memory corruption every 60 seconds
[    1.002713] Initialise module verification
[    1.002753] audit: initializing netlink socket (disabled)
[    1.002765] type=2000 audit(1391809929.896:1): initialized
[    1.024448] bounce pool size: 64 pages
[    1.024458] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.025463] zbud: loaded
[    1.025590] VFS: Disk quotas dquot_6.5.2
[    1.025626] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.026040] fuse init (API version 7.22)
[    1.026105] msgmni has been set to 7615
[    1.026719] Key type asymmetric registered
[    1.026723] Asymmetric key parser 'x509' registered
[    1.026750] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.026795] io scheduler noop registered
[    1.026797] io scheduler deadline registered (default)
[    1.026820] io scheduler cfq registered
[    1.026913] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    1.026992] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    1.027081] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[    1.027174] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[    1.027259] pcieport 0000:00:1c.5: irq 44 for MSI/MSI-X
[    1.027345] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[    1.027348] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    1.027349] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[    1.027352] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[    1.027371] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    1.027375] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    1.027392] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    1.027396] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[    1.027412] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    1.027414] pci 0000:44:00.0: Signaling PME through PCIe PME interrupt
[    1.027418] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[    1.027435] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[    1.027436] pci 0000:45:00.0: Signaling PME through PCIe PME interrupt
[    1.027441] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[    1.027449] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.027507] pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 3b44 ss_vid 103c ss_did 1411
[    1.027540] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
[    1.027552] pciehp 0000:00:1c.5:pcie04: HPC vendor_id 8086 device_id 3b4c ss_vid 103c ss_did 1411
[    1.027579] pciehp 0000:00:1c.5:pcie04: service driver pciehp loaded
[    1.027585] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.027627] intel_idle: MWAIT substates: 0x1120
[    1.027629] intel_idle: v0.4 model 0x25
[    1.027629] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.027857] ACPI: AC Adapter [AC] (on-line)
[    1.028017] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
[    1.028021] ACPI: Sleep Button [SLPB]
[    1.028047] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    1.028068] ACPI: Lid Switch [LID]
[    1.028095] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.028097] ACPI: Power Button [PWRF]
[    1.028152] ACPI: Requesting acpi_cpufreq
[    1.034367] thermal LNXTHERM:00: registered as thermal_zone0
[    1.034369] ACPI: Thermal Zone [EXTZ] (66 C)
[    1.034412] thermal LNXTHERM:01: registered as thermal_zone1
[    1.034413] ACPI: Thermal Zone [EX2Z] (0 C)
[    1.034458] thermal LNXTHERM:02: registered as thermal_zone2
[    1.034459] ACPI: Thermal Zone [PWMZ] (0 C)
[    1.037502] thermal LNXTHERM:03: registered as thermal_zone3
[    1.037504] ACPI: Thermal Zone [LOCZ] (43 C)
[    1.037931] thermal LNXTHERM:04: registered as thermal_zone4
[    1.037933] ACPI: Thermal Zone [GFXZ] (0 C)
[    1.050010] thermal LNXTHERM:05: registered as thermal_zone5
[    1.050011] ACPI: Thermal Zone [BATZ] (25 C)
[    1.064813] thermal LNXTHERM:06: registered as thermal_zone6
[    1.064815] ACPI: Thermal Zone [EGXZ] (0 C)
[    1.065023] thermal LNXTHERM:07: registered as thermal_zone7
[    1.065025] ACPI: Thermal Zone [CPUZ] (71 C)
[    1.065195] thermal LNXTHERM:08: registered as thermal_zone8
[    1.065197] ACPI: Thermal Zone [MCHZ] (64 C)
[    1.065359] thermal LNXTHERM:09: registered as thermal_zone9
[    1.065361] ACPI: Thermal Zone [PCHZ] (59 C)
[    1.065384] GHES: HEST is not enabled!
[    1.065460] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.066776] Linux agpgart interface v0.103
[    1.067868] brd: module loaded
[    1.068396] loop: module loaded
[    1.068675] libphy: Fixed MDIO Bus: probed
[    1.068733] tun: Universal TUN/TAP device driver, 1.6
[    1.068734] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.068771] PPP generic driver version 2.4.2
[    1.068802] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.068803] ehci-pci: EHCI PCI platform driver
[    1.068969] ehci-pci 0000:00:1a.0: setting latency timer to 64
[    1.068979] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.068985] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.069000] ehci-pci 0000:00:1a.0: debug port 2
[    1.072924] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.072947] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd4609000
[    1.082995] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.083024] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.083026] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.083028] usb usb1: Product: EHCI Host Controller
[    1.083029] usb usb1: Manufacturer: Linux 3.11.0-15-generic ehci_hcd
[    1.083030] usb usb1: SerialNumber: 0000:00:1a.0
[    1.083121] hub 1-0:1.0: USB hub found
[    1.083126] hub 1-0:1.0: 2 ports detected
[    1.083357] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    1.083364] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.083368] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.083381] ehci-pci 0000:00:1d.0: debug port 2
[    1.087339] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.087352] ehci-pci 0000:00:1d.0: irq 20, io mem 0xd4608000
[    1.098980] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.098993] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.098994] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.098996] usb usb2: Product: EHCI Host Controller
[    1.098997] usb usb2: Manufacturer: Linux 3.11.0-15-generic ehci_hcd
[    1.098998] usb usb2: SerialNumber: 0000:00:1d.0
[    1.099073] hub 2-0:1.0: USB hub found
[    1.099076] hub 2-0:1.0: 2 ports detected
[    1.099165] ehci-platform: EHCI generic platform driver
[    1.099171] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.099172] ohci-pci: OHCI PCI platform driver
[    1.099179] ohci-platform: OHCI generic platform driver
[    1.099183] uhci_hcd: USB Universal Host Controller Interface driver
[    1.099231] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.101042] i8042: Detected active multiplexing controller, rev 1.1
[    1.101715] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.101719] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.101737] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.101750] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.101762] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.101840] mousedev: PS/2 mouse device common for all mice
[    1.101953] rtc_cmos 00:07: RTC can wake from S4
[    1.102121] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    1.102153] rtc_cmos 00:07: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.102205] device-mapper: uevent: version 1.0.3
[    1.102249] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[    1.102309] cpuidle: using governor ladder
[    1.102386] cpuidle: using governor menu
[    1.102394] ledtrig-cpu: registered to indicate activity on CPUs
[    1.102473] TCP: cubic registered
[    1.102544] NET: Registered protocol family 10
[    1.102712] NET: Registered protocol family 17
[    1.102721] Key type dns_resolver registered
[    1.102930] PM: Hibernation image not present or could not be loaded.
[    1.102933] Loading module verification certificates
[    1.103792] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 233c65a83836c14ba34eda83a0b805044bc3b448'
[    1.103803] registered taskstats version 1
[    1.105854] Key type trusted registered
[    1.107569] Key type encrypted registered
[    1.109081] AppArmor: AppArmor sha1 policy hashing enabled
[    1.109462]   Magic number: 2:69:904
[    1.109613] rtc_cmos 00:07: setting system clock to 2014-02-07 21:52:10 UTC (1391809930)
[    1.110225] ACPI: Battery Slot [BAT0] (battery present)
[    1.110461] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.110463] EDD information not available.
[    1.111555] Freeing unused kernel memory: 1364K (ffffffff81d10000 - ffffffff81e65000)
[    1.111558] Write protecting the kernel read-only data: 12288k
[    1.113703] Freeing unused kernel memory: 1032K (ffff8800016fe000 - ffff880001800000)
[    1.115346] Freeing unused kernel memory: 784K (ffff880001b3c000 - ffff880001c00000)
[    1.126057] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.130715] systemd-udevd[124]: starting version 204
[    1.159121] ahci 0000:00:1f.2: version 3.0
[    1.159253] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.159265] r8169 0000:45:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.159464] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[    1.159513] ahci: SSS flag set, parallel bus scan disabled
[    1.159579] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x13 impl SATA mode
[    1.159583] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
[    1.159589] r8169 0000:45:00.0: irq 46 for MSI/MSI-X
[    1.159592] ahci 0000:00:1f.2: setting latency timer to 64
[    1.159798] r8169 0000:45:00.0 eth0: RTL8168d/8111d at 0xffffc9000064c000, 64:31:50:12:bc:5b, XID 083000c0 IRQ 46
[    1.159802] r8169 0000:45:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.175669] scsi0 : ahci
[    1.175771] scsi1 : ahci
[    1.175843] scsi2 : ahci
[    1.175915] scsi3 : ahci
[    1.175977] scsi4 : ahci
[    1.176205] scsi5 : ahci
[    1.176292] ata1: SATA max UDMA/133 abar m2048@0xd4607000 port 0xd4607100 irq 45
[    1.176296] ata2: SATA max UDMA/133 abar m2048@0xd4607000 port 0xd4607180 irq 45
[    1.176297] ata3: DUMMY
[    1.176298] ata4: DUMMY
[    1.176300] ata5: SATA max UDMA/133 abar m2048@0xd4607000 port 0xd4607300 irq 45
[    1.176301] ata6: DUMMY
[    1.395084] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.495104] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.495868] ata1.00: unexpected _GTF length (8)
[    1.496134] ata1.00: ATA-8: Hitachi HTS725050A9A364, PC4OCH0A, max UDMA/100
[    1.496139] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.497119] ata1.00: unexpected _GTF length (8)
[    1.497388] ata1.00: configured for UDMA/100
[    1.497700] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS72505 PC4O PQ: 0 ANSI: 5
[    1.497942] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.497967] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.498027] sd 0:0:0:0: [sda] Write Protect is off
[    1.498029] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.498061] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.527488] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[    1.527494] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.527907] hub 1-1:1.0: USB hub found
[    1.528076] hub 1-1:1.0: 6 ports detected
[    1.542432]  sda: sda1 sda2 sda3 sda4
[    1.542850] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.639117] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.771504] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[    1.771509] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.771941] hub 2-1:1.0: USB hub found
[    1.772079] hub 2-1:1.0: 8 ports detected
[    1.815132] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.818218] ata2.00: unexpected _GTF length (8)
[    1.818224] ata2.00: ATAPI: hp      DVDRAM GT30L, mP04, max UDMA/100
[    1.821789] ata2.00: unexpected _GTF length (8)
[    1.821797] ata2.00: configured for UDMA/100
[    1.824838] scsi 1:0:0:0: CD-ROM            hp       DVDRAM GT30L     mP04 PQ: 0 ANSI: 5
[    1.828907] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.828911] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.829103] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.829189] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.843308] usb 1-1.5: new high-speed USB device number 3 using ehci-pci
[    1.967394] usb 1-1.5: New USB device found, idVendor=0461, idProduct=4db6
[    1.967399] usb 1-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    1.967402] usb 1-1.5: Product: Villem
[    1.967405] usb 1-1.5: Manufacturer: Primax Electronics Ltd.
[    1.967408] usb 1-1.5: SerialNumber: PMX01
[    1.999123] tsc: Refined TSC clocksource calibration: 2659.981 MHz
[    2.043310] usb 2-1.1: new full-speed USB device number 3 using ehci-pci
[    2.142036] usb 2-1.1: New USB device found, idVendor=045e, idProduct=0745
[    2.142042] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.142046] usb 2-1.1: Product: Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0
[    2.142050] usb 2-1.1: Manufacturer: Microsoft
[    2.145236] hidraw: raw HID events driver (C) Jiri Kosina
[    2.147094] ata5: SATA link down (SStatus 0 SControl 300)
[    2.159256] usbcore: registered new interface driver usbhid
[    2.159263] usbhid: USB HID core driver
[    2.160801] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input4
[    2.160934] hid-generic 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0] on usb-0000:00:1d.0-1.1/input0
[    2.161274] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/input/input5
[    2.161514] hid-generic 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0] on usb-0000:00:1d.0-1.1/input1
[    2.172465] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.2/input/input6
[    2.172837] hid-generic 0003:045E:0745.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Nano Transceiver v2.0] on usb-0000:00:1d.0-1.1/input2
[    2.343354] usb 2-1.2: new high-speed USB device number 4 using ehci-pci
[    2.436832] usb 2-1.2: New USB device found, idVendor=0fce, idProduct=014f
[    2.436838] usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[    2.436842] usb 2-1.2: Product: LT15i
[    2.436846] usb 2-1.2: Manufacturer: Sony
[    2.436849] usb 2-1.2: SerialNumber: CB5A1FXTTB
[    2.753409] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[    2.753413] EXT4-fs (sda1): write access will be enabled during recovery
[    2.999296] Switched to clocksource tsc
[    4.064515] EXT4-fs (sda1): recovery complete
[    4.070895] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    5.593637] Swap area shorter than signature indicates
[    6.245384] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    6.417041] systemd-udevd[315]: starting version 204
[    7.132585] lp: driver loaded but no devices found
[    7.419287] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    7.849764] acpi device:04: registered as cooling_device4
[    7.850116] ACPI: Video Device [DGFX] (multi-head: yes  rom: no  post: no)
[    7.850159] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/LNXVIDEO:00/input/input7
[    8.003707] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251)
[    8.003713] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.003717] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
[    8.003719] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.003720] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
[    8.003723] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.003724] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
[    8.003726] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.003727] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    8.328735] wmi: Mapper loaded
[    8.397361] mei_me 0000:00:16.0: setting latency timer to 64
[    8.397407] mei_me 0000:00:16.0: irq 47 for MSI/MSI-X
[    8.464410] Blacklisted intel_ips for HP ProBook
[    8.575038] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
[    8.740554] [drm] Initialized drm 1.1.0 20060810
[    8.786000] cfg80211: Calling CRDA to update world regulatory domain
[    8.827892] lib80211: common routines for IEEE802.11 drivers
[    8.827896] lib80211_crypt: registered algorithm 'NULL'
[    8.837534] hp_accel: hardware type HPB452x found
[    8.838143] lis3lv02d: 8 bits sensor found
[    8.875772] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input8
[    9.295123] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xe40000/0x5a0400, board id: 3655, fw id: 640916
[    9.338917] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
[    9.545768] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[    9.618481] autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[    9.618486]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    9.618488]    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[    9.618489]    mono: mono_out=0x0
[    9.618490]    inputs:
[    9.618492]      Internal Mic=0x11
[    9.618494]      Mic=0xa
[    9.631444] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    9.631530] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    9.631798] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[    9.631801] hda-intel 0000:01:00.1: Using LPIB position fix
[    9.631843] snd_hda_intel 0000:01:00.1: irq 49 for MSI/MSI-X
[    9.634142] hda-intel 0000:01:00.1: Enable sync_write for stable communication
[    9.658964] [drm] radeon kernel modesetting enabled.
[    9.667666] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[    9.668117] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68E4 0x103C:0x1411).
[    9.668147] [drm] register mmio base: 0xD4500000
[    9.668149] [drm] register mmio size: 131072
[    9.668221] ATOM BIOS: HP
[    9.668282] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[    9.668286] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[    9.668288] [drm] Detected VRAM RAM=1024M, BAR=256M
[    9.668290] [drm] RAM width 64bits DDR
[    9.668353] [TTM] Zone  kernel: Available graphics memory: 1951208 kiB
[    9.668355] [TTM] Initializing pool allocator
[    9.668359] [TTM] Initializing DMA pool allocator
[    9.668382] [drm] radeon: 1024M of VRAM memory ready
[    9.668384] [drm] radeon: 512M of GTT memory ready.
[    9.685806] Linux video capture interface: v2.00
[    9.947979] input: HP WMI hotkeys as /devices/virtual/input/input13
[   10.013170] [drm] GART: num cpu pages 131072, num gpu pages 131072
[   10.029209] type=1400 audit(1391809939.416:2): apparmor="STATUS" operation="profile_load" parent=470 profile="unconfined" name="/sbin/dhclient" pid=472 comm="apparmor_parser"
[   10.029218] type=1400 audit(1391809939.416:3): apparmor="STATUS" operation="profile_load" parent=470 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=472 comm="apparmor_parser"
[   10.029224] type=1400 audit(1391809939.416:4): apparmor="STATUS" operation="profile_load" parent=470 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=472 comm="apparmor_parser"
[   10.029234] type=1400 audit(1391809939.416:5): apparmor="STATUS" operation="profile_replace" parent=413 profile="unconfined" name="/sbin/dhclient" pid=416 comm="apparmor_parser"
[   10.029243] type=1400 audit(1391809939.416:6): apparmor="STATUS" operation="profile_replace" parent=413 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=416 comm="apparmor_parser"
[   10.029249] type=1400 audit(1391809939.416:7): apparmor="STATUS" operation="profile_replace" parent=413 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=416 comm="apparmor_parser"
[   10.029750] type=1400 audit(1391809939.416:8): apparmor="STATUS" operation="profile_replace" parent=413 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=416 comm="apparmor_parser"
[   10.029754] type=1400 audit(1391809939.416:9): apparmor="STATUS" operation="profile_replace" parent=413 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=416 comm="apparmor_parser"
[   10.029834] type=1400 audit(1391809939.416:10): apparmor="STATUS" operation="profile_replace" parent=470 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=472 comm="apparmor_parser"
[   10.029839] type=1400 audit(1391809939.416:11): apparmor="STATUS" operation="profile_replace" parent=470 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=472 comm="apparmor_parser"
[   10.030370] [drm] Loading CEDAR Microcode
[   10.042013] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
[   10.051950] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
[   10.052615] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2
[   10.053161] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   10.230831] uvcvideo: Found UVC 1.00 device Villem (0461:4db6)
[   10.238894] input: Villem as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input14
[   10.239019] usbcore: registered new interface driver uvcvideo
[   10.239021] USB Video Class driver (1.1.1)
[   10.544468] wl: module license 'MIXED/Proprietary' taints kernel.
[   10.544476] Disabling lock debugging due to kernel taint
[   10.547144] wl: module verification failed: signature and/or required key missing - tainting kernel
[   10.581855] INFO @wl_cfg80211_attach : Registered CFG80211 phy
[   10.652915] kvm: disabled by bios
[   10.664767] kvm: disabled by bios
[   10.679101] [drm] PCIE GART of 512M enabled (table at 0x000000000025D000).
[   10.679267] radeon 0000:01:00.0: WB enabled
[   10.679271] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88012f242c00
[   10.679274] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88012f242c0c
[   10.680117] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc90010f9c418
[   10.680121] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   10.680123] [drm] Driver supports precise vblank timestamp query.
[   10.680152] radeon 0000:01:00.0: irq 50 for MSI/MSI-X
[   10.680169] radeon 0000:01:00.0: radeon: using MSI.
[   10.680204] [drm] radeon: irq initialized.
[   10.696960] [drm] ring test on 0 succeeded in 1 usecs
[   10.697025] [drm] ring test on 3 succeeded in 1 usecs
[   10.698366] kvm: disabled by bios
[   10.720158] lib80211_crypt: registered algorithm 'TKIP'
[   10.882698] [drm] ring test on 5 succeeded in 1 usecs
[   10.882704] [drm] UVD initialized successfully.
[   10.883007] [drm] ib test on ring 0 succeeded in 0 usecs
[   10.883040] [drm] ib test on ring 3 succeeded in 0 usecs
[   11.033810] [drm] ib test on ring 5 succeeded
[   11.091922] [drm] radeon atom DIG backlight initialized
[   11.091936] [drm] Radeon Display Connectors
[   11.091939] [drm] Connector 0:
[   11.091942] [drm]   LVDS-1
[   11.091946] [drm]   DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[   11.091948] [drm]   Encoders:
[   11.091951] [drm]     LCD1: INTERNAL_UNIPHY
[   11.091953] [drm] Connector 1:
[   11.091955] [drm]   HDMI-A-1
[   11.091957] [drm]   HPD1
[   11.091960] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[   11.091962] [drm]   Encoders:
[   11.091964] [drm]     DFP1: INTERNAL_UNIPHY1
[   11.091966] [drm] Connector 2:
[   11.091969] [drm]   VGA-1
[   11.091972] [drm]   DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[   11.091974] [drm]   Encoders:
[   11.091976] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   11.092048] [drm] Internal thermal controller with fan control
[   11.092113] [drm] radeon: power management initialized
[   11.096445] eth1: Broadcom BCM4727 802.11 Hybrid Wireless Controller 6.30.223.141 (r415941)
[   11.202464] cfg80211: World regulatory domain updated:
[   11.202468] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   11.202470] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.202471] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.202473] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   11.202474] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.202475] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.253152] init: failsafe main process (511) killed by TERM signal
[   11.498078] [drm] fb mappable at 0xC035F000
[   11.498081] [drm] vram apper at 0xC0000000
[   11.498082] [drm] size 4325376
[   11.498083] [drm] fb depth is 24
[   11.498084] [drm]    pitch is 5632
[   11.498182] fbcon: radeondrmfb (fb0) is primary device
[   12.076208] Console: switching to colour frame buffer device 170x48
[   12.078726] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[   12.078728] radeon 0000:01:00.0: registered panic notifier
[   12.078747] [drm] Initialized radeon 2.34.0 20080528 for 0000:01:00.0 on minor 0
[   13.071053] Bluetooth: Core ver 2.16
[   13.071080] NET: Registered protocol family 31
[   13.071082] Bluetooth: HCI device and connection manager initialized
[   13.071095] Bluetooth: HCI socket layer initialized
[   13.071098] Bluetooth: L2CAP socket layer initialized
[   13.071103] Bluetooth: SCO socket layer initialized
[   13.286825] Bluetooth: RFCOMM TTY layer initialized
[   13.286842] Bluetooth: RFCOMM socket layer initialized
[   13.286844] Bluetooth: RFCOMM ver 1.11
[   13.410123] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   13.410128] Bluetooth: BNEP filters: protocol multicast
[   13.410142] Bluetooth: BNEP socket layer initialized
[   13.459125] init: avahi-cups-reload main process (743) terminated with status 1
[   13.729768] ppdev: user-space parallel port driver
[   16.223130] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   16.357719] r8169 0000:45:00.0 eth0: link down
[   16.357758] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.358064] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.213067] kvm: disabled by bios
[   17.355644] audit_printk_skb: 183 callbacks suppressed
[   17.355648] type=1400 audit(1391809946.740:73): apparmor="STATUS" operation="profile_replace" parent=974 profile="unconfined" name="/usr/sbin/mysqld" pid=995 comm="apparmor_parser"
[   22.385225] init: plymouth-stop pre-start process (1168) terminated with status 1
[   86.345185] usb 2-1.2: USB disconnect, device number 4
[   86.546956] usb 2-1.2: new high-speed USB device number 5 using ehci-pci
[   86.640321] usb 2-1.2: New USB device found, idVendor=0fce, idProduct=714f
[   86.640327] usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[   86.640332] usb 2-1.2: Product: LT15i
[   86.640335] usb 2-1.2: Manufacturer: Sony
[   86.640339] usb 2-1.2: SerialNumber: CB5A1FXTTB
[   86.724820] usbcore: registered new interface driver cdc_ether
[   86.728128] rndis_host 2-1.2:1.0 usb0: register 'rndis_host' at usb-0000:00:1d.0-1.2, RNDIS device, 7e:21:8b:67:59:b7
[   86.728178] usbcore: registered new interface driver rndis_host
[  157.386278] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[  157.569834] systemd-hostnamed[2556]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 1167.170942] perf samples too long (2513 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 1559.556679] systemd-hostnamed[3113]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 4425.427501] usb 2-1.2: USB disconnect, device number 5
[ 4425.429772] rndis_host 2-1.2:1.0 usb0: unregister 'rndis_host' usb-0000:00:1d.0-1.2, RNDIS device
[ 4454.532694] usb 1-1.4: new high-speed USB device number 4 using ehci-pci
[ 4454.627811] usb 1-1.4: New USB device found, idVendor=19d2, idProduct=2000
[ 4454.627818] usb 1-1.4: New USB device strings: Mfr=3, Product=2, SerialNumber=4
[ 4454.627823] usb 1-1.4: Product: ZTE WCDMA Technologies MSM
[ 4454.627827] usb 1-1.4: Manufacturer: ZTE,Incorporated
[ 4454.627830] usb 1-1.4: SerialNumber: MF6670AVED010000
[ 4454.688842] usb-storage 1-1.4:1.0: USB Mass Storage device detected
[ 4454.689001] scsi6 : usb-storage 1-1.4:1.0
[ 4454.689181] usbcore: registered new interface driver usb-storage
[ 4455.690186] scsi 6:0:0:0: CD-ROM            ZTE      USB SCSI CD-ROM  2.31 PQ: 0 ANSI: 2
[ 4455.690816] scsi 6:0:0:1: Direct-Access     ZTE      MMC Storage      2.31 PQ: 0 ANSI: 2
[ 4455.693200] sr1: scsi-1 drive
[ 4455.693439] sr 6:0:0:0: Attached scsi CD-ROM sr1
[ 4455.693574] sr 6:0:0:0: Attached scsi generic sg2 type 5
[ 4455.693981] sd 6:0:0:1: Attached scsi generic sg3 type 0
[ 4455.701727] sd 6:0:0:1: [sdb] Attached SCSI removable disk
[ 4455.753748] sr 6:0:0:0: ioctl_internal_command return code = 8070000
[ 4455.753755]    : Sense Key : Hardware Error [current]
[ 4455.753761]    : Add. Sense: No additional sense information
[ 4455.953731] sr 6:0:0:0: ioctl_internal_command return code = 8070000
[ 4455.953739]    : Sense Key : Hardware Error [current]
[ 4455.953744]    : Add. Sense: No additional sense information
[ 4456.087522] ISO 9660 Extensions: Microsoft Joliet Level 1
[ 4456.127622] ISOFS: changing to secondary root
[ 4476.166425] systemd-hostnamed[3895]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 4630.758764] usb 1-1.4: USB disconnect, device number 4
[ 4642.877614] usb 1-1.4: new high-speed USB device number 5 using ehci-pci
[ 4642.972639] usb 1-1.4: New USB device found, idVendor=19d2, idProduct=2000
[ 4642.972646] usb 1-1.4: New USB device strings: Mfr=3, Product=2, SerialNumber=4
[ 4642.972651] usb 1-1.4: Product: ZTE WCDMA Technologies MSM
[ 4642.972654] usb 1-1.4: Manufacturer: ZTE,Incorporated
[ 4642.972658] usb 1-1.4: SerialNumber: MF6670AVED010000
[ 4642.975140] usb-storage 1-1.4:1.0: USB Mass Storage device detected
[ 4642.975314] scsi7 : usb-storage 1-1.4:1.0
[ 4643.975214] scsi 7:0:0:0: CD-ROM            ZTE      USB SCSI CD-ROM  2.31 PQ: 0 ANSI: 2
[ 4643.975926] scsi 7:0:0:1: Direct-Access     ZTE      MMC Storage      2.31 PQ: 0 ANSI: 2
[ 4643.978861] sr1: scsi-1 drive
[ 4643.979114] sr 7:0:0:0: Attached scsi CD-ROM sr1
[ 4643.979295] sr 7:0:0:0: Attached scsi generic sg2 type 5
[ 4643.979661] sd 7:0:0:1: Attached scsi generic sg3 type 0
[ 4643.984490] sd 7:0:0:1: [sdb] Attached SCSI removable disk
[ 4644.046788] sr 7:0:0:0: ioctl_internal_command return code = 8070000
[ 4644.046797]    : Sense Key : Hardware Error [current]
[ 4644.046803]    : Add. Sense: No additional sense information
[ 4644.200246] scsi 7:0:0:0: ioctl_internal_command return code = 8070000
[ 4644.200253]    : Sense Key : Hardware Error [current]
[ 4644.200258]    : Add. Sense: No additional sense information
[ 4644.215954] systemd-udevd[3944]: Failed to apply ACL on /dev/sr1: No such file or directory
[ 4644.215967] systemd-udevd[3944]: Failed to apply ACL on /dev/sr1: No such file or directory
[ 4645.834410] usb 1-1.4: USB disconnect, device number 5
[ 4649.106299] usb 1-1.4: new high-speed USB device number 6 using ehci-pci
[ 4649.201727] usb 1-1.4: New USB device found, idVendor=19d2, idProduct=0031
[ 4649.201735] usb 1-1.4: New USB device strings: Mfr=3, Product=2, SerialNumber=4
[ 4649.201739] usb 1-1.4: Product: ZTE WCDMA Technologies MSM
[ 4649.201743] usb 1-1.4: Manufacturer: ZTE,Incorporated
[ 4649.201746] usb 1-1.4: SerialNumber: MF6670AVED010000
[ 4649.205728] usb-storage 1-1.4:1.2: USB Mass Storage device detected
[ 4649.205857] scsi8 : usb-storage 1-1.4:1.2
[ 4649.262810] usbcore: registered new interface driver usbserial
[ 4649.262821] usbcore: registered new interface driver usbserial_generic
[ 4649.262828] usbserial: USB Serial support registered for generic
[ 4649.290133] usbcore: registered new interface driver cdc_wdm
[ 4649.319524] qmi_wwan 1-1.4:1.4: cdc-wdm1: USB WDM device
[ 4649.319863] qmi_wwan 1-1.4:1.4 wwan0: register 'qmi_wwan' at usb-0000:00:1a.0-1.4, WWAN/QMI device, 5a:b9:fa:33:4b:99
[ 4649.320004] usbcore: registered new interface driver qmi_wwan
[ 4649.320029] usbcore: registered new interface driver option
[ 4649.320048] usbserial: USB Serial support registered for GSM modem (1-port)
[ 4649.320157] option 1-1.4:1.0: GSM modem (1-port) converter detected
[ 4649.320755] usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB0
[ 4649.320805] option 1-1.4:1.1: GSM modem (1-port) converter detected
[ 4649.320919] usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB1
[ 4649.320973] option 1-1.4:1.3: GSM modem (1-port) converter detected
[ 4649.321052] usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB2
[ 4650.203718] scsi 8:0:0:0: CD-ROM            ZTE      USB SCSI CD-ROM  2.31 PQ: 0 ANSI: 2
[ 4650.204435] scsi 8:0:0:1: Direct-Access     ZTE      MMC Storage      2.31 PQ: 0 ANSI: 2
[ 4650.206910] sr1: scsi-1 drive
[ 4650.207080] sr 8:0:0:0: Attached scsi CD-ROM sr1
[ 4650.207169] sr 8:0:0:0: Attached scsi generic sg2 type 5
[ 4650.209628] sd 8:0:0:1: Attached scsi generic sg3 type 0
[ 4650.222909] sd 8:0:0:1: [sdb] Attached SCSI removable disk
[ 4650.283197] sr 8:0:0:0: ioctl_internal_command return code = 8070000
[ 4650.283202]    : Sense Key : Hardware Error [current]
[ 4650.283205]    : Add. Sense: No additional sense information
[ 4650.475210] sr 8:0:0:0: ioctl_internal_command return code = 8070000
[ 4650.475216]    : Sense Key : Hardware Error [current]
[ 4650.475219]    : Add. Sense: No additional sense information
[ 4686.671025] PPP BSD Compression module registered
[ 4686.693211] PPP Deflate Compression module registered
[ 4782.550617] usb 1-1.4: USB disconnect, device number 6
[ 4782.550912] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[ 4782.550938] option 1-1.4:1.0: device disconnected
[ 4782.551197] option1 ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 4782.551205] option1 ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 4782.551210] option1 ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 4782.551214] option1 ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 4782.552017] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[ 4782.552046] option 1-1.4:1.1: device disconnected
[ 4782.552296] option1 ttyUSB2: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 4782.556551] option1 ttyUSB2: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 4782.560177] option1 ttyUSB2: option_instat_callback: error -71
[ 4782.560796] option1 ttyUSB2: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 4782.563671] option1 ttyUSB2: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 4782.564794] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[ 4782.564807] option 1-1.4:1.3: device disconnected
[ 4782.564886] qmi_wwan 1-1.4:1.4 wwan0: unregister 'qmi_wwan' usb-0000:00:1a.0-1.4, WWAN/QMI device
[ 4801.176494] init: anacron main process (4308) killed by TERM signal
[ 4801.501933] PM: Syncing filesystems ... done.
[ 4801.618336] PM: Preparing system for mem sleep
[ 4802.132788] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 4802.134588] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 4802.135793] PM: Entering mem sleep
[ 4802.135893] Suspending console(s) (use no_console_suspend to debug)
[ 4802.136241] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 4802.136292] sd 0:0:0:0: [sda] Stopping disk
[ 4802.182177] mei_me 0000:00:16.0: suspend
[ 4802.299935] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D3cold
[ 4802.908190] PM: suspend of devices complete after 772.072 msecs
[ 4802.908445] PM: late suspend of devices complete after 0.251 msecs
[ 4802.908651] r8169 0000:45:00.0: System wakeup enabled by ACPI
[ 4802.924066] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 4802.940132] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 4802.971967] PM: noirq suspend of devices complete after 63.514 msecs
[ 4802.972194] ACPI: Preparing to enter system sleep state S3
[ 4802.986541] PM: Saving platform NVS memory
[ 4802.987288] Disabling non-boot CPUs ...
[ 4802.988882] smpboot: CPU 1 is now offline
[ 4803.091943] smpboot: CPU 2 is now offline
[ 4803.092525] Broke affinity for irq 16
[ 4803.195952] smpboot: CPU 3 is now offline
[ 4803.197031] ACPI: Low-level resume complete
[ 4803.197076] PM: Restoring platform NVS memory
[ 4803.197723] Enabling non-boot CPUs ...
[ 4803.197770] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 4803.211315] CPU1 is up
[ 4803.211334] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 4803.224710] CPU2 is up
[ 4803.224730] smpboot: Booting Node 0 Processor 3 APIC 0x5
[ 4803.238231] CPU3 is up
[ 4803.240614] ACPI: Waking up from system sleep state S3
[ 4803.325364] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 4803.330355] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
[ 4803.361362] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 4803.441538] PM: noirq resume of devices complete after 147.766 msecs
[ 4803.441694] PM: early resume of devices complete after 0.124 msecs
[ 4803.441750] mei_me 0000:00:16.0: irq 47 for MSI/MSI-X
[ 4803.441845] pci 0000:00:1e.0: setting latency timer to 64
[ 4803.441870] ahci 0000:00:1f.2: setting latency timer to 64
[ 4803.441984] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 4803.442150] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[ 4803.446894] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 4803.446915] snd_hda_intel 0000:01:00.1: irq 49 for MSI/MSI-X
[ 4803.447304] [drm] PCIE GART of 512M enabled (table at 0x000000000025D000).
[ 4803.447469] radeon 0000:01:00.0: WB enabled
[ 4803.447472] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88012f242c00
[ 4803.447474] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88012f242c0c
[ 4803.448219] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc90010f9c418
[ 4803.464602] [drm] ring test on 0 succeeded in 1 usecs
[ 4803.464660] [drm] ring test on 3 succeeded in 1 usecs
[ 4803.545368] pciehp 0000:00:1c.5:pcie04: Device 0000:45:00.0 already exists at 0000:45:00, cannot hot-add
[ 4803.545370] pciehp 0000:00:1c.5:pcie04: Cannot add device at 0000:45:00
[ 4803.545393] r8169 0000:45:00.0: System wakeup disabled by ACPI
[ 4803.650266] [drm] ring test on 5 succeeded in 1 usecs
[ 4803.650268] [drm] UVD initialized successfully.
[ 4803.650306] [drm] ib test on ring 0 succeeded in 0 usecs
[ 4803.650341] [drm] ib test on ring 3 succeeded in 1 usecs
[ 4803.657448] usb 1-1.5: reset high-speed USB device number 3 using ehci-pci
[ 4803.777361] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4803.780018] ata2.00: unexpected _GTF length (8)
[ 4803.783139] ata2.00: unexpected _GTF length (8)
[ 4803.783143] ata2.00: configured for UDMA/100
[ 4803.785394] ata5: SATA link down (SStatus 0 SControl 300)
[ 4803.800765] [drm] ib test on ring 5 succeeded
[ 4806.289638] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4806.290525] ata1.00: unexpected _GTF length (8)
[ 4806.298337] ata1.00: unexpected _GTF length (8)
[ 4806.298648] ata1.00: configured for UDMA/100
[ 4806.313712] sd 0:0:0:0: [sda] Starting disk
[ 4806.377794] PM: resume of devices complete after 2935.828 msecs
[ 4806.378092] PM: Finishing wakeup.
[ 4806.378093] Restarting tasks ... done.
[ 4806.386991] video LNXVIDEO:00: Restoring backlight state
[ 4806.457881] usb 2-1.4: new high-speed USB device number 6 using ehci-pci
[ 4806.774983] r8169 0000:45:00.0 eth0: link down
[ 4806.775030] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4806.806587] usb 2-1.4: New USB device found, idVendor=0bda, idProduct=0138
[ 4806.806593] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4806.806595] usb 2-1.4: Product: USB2.0-CRW
[ 4806.806598] usb 2-1.4: Manufacturer: Generic
[ 4806.806600] usb 2-1.4: SerialNumber: 20090516388200000
[ 4806.860466] ums-realtek 2-1.4:1.0: USB Mass Storage device detected
[ 4806.879530] scsi9 : usb-storage 2-1.4:1.0
[ 4806.879818] usbcore: registered new interface driver ums-realtek
[ 4807.033430] usb 2-1.4: USB disconnect, device number 6
[ 4827.907801] usb 1-1.4: new high-speed USB device number 7 using ehci-pci
[ 4828.002771] usb 1-1.4: New USB device found, idVendor=19d2, idProduct=2000
[ 4828.002779] usb 1-1.4: New USB device strings: Mfr=3, Product=2, SerialNumber=4
[ 4828.002784] usb 1-1.4: Product: ZTE WCDMA Technologies MSM
[ 4828.002787] usb 1-1.4: Manufacturer: ZTE,Incorporated
[ 4828.002791] usb 1-1.4: SerialNumber: MF6670AVED010000
[ 4828.005255] usb-storage 1-1.4:1.0: USB Mass Storage device detected
[ 4828.005381] scsi10 : usb-storage 1-1.4:1.0
[ 4829.005060] scsi 10:0:0:0: CD-ROM            ZTE      USB SCSI CD-ROM  2.31 PQ: 0 ANSI: 2
[ 4829.005630] scsi 10:0:0:1: Direct-Access     ZTE      MMC Storage      2.31 PQ: 0 ANSI: 2
[ 4829.007500] sr1: scsi-1 drive
[ 4829.008149] sr 10:0:0:0: Attached scsi CD-ROM sr1
[ 4829.008290] sr 10:0:0:0: Attached scsi generic sg2 type 5
[ 4829.008621] sd 10:0:0:1: Attached scsi generic sg3 type 0
[ 4829.020874] sd 10:0:0:1: [sdb] Attached SCSI removable disk
[ 4829.084566] sr 10:0:0:0: ioctl_internal_command return code = 8070000
[ 4829.084573]    : Sense Key : Hardware Error [current]
[ 4829.084579]    : Add. Sense: No additional sense information
[ 4829.099390] systemd-udevd[4810]: Failed to apply ACL on /dev/sr1: No such file or directory
[ 4829.099408] systemd-udevd[4810]: Failed to apply ACL on /dev/sr1: No such file or directory
[ 4829.116454] systemd-udevd[4810]: Failed to apply ACL on /dev/sr1: No such file or directory
[ 4829.116467] systemd-udevd[4810]: Failed to apply ACL on /dev/sr1: No such file or directory
[ 4830.862704] usb 1-1.4: USB disconnect, device number 7
[ 4834.132390] usb 1-1.4: new high-speed USB device number 8 using ehci-pci
[ 4834.227483] usb 1-1.4: New USB device found, idVendor=19d2, idProduct=0031
[ 4834.227491] usb 1-1.4: New USB device strings: Mfr=3, Product=2, SerialNumber=4
[ 4834.227495] usb 1-1.4: Product: ZTE WCDMA Technologies MSM
[ 4834.227499] usb 1-1.4: Manufacturer: ZTE,Incorporated
[ 4834.227502] usb 1-1.4: SerialNumber: MF6670AVED010000
[ 4834.231232] option 1-1.4:1.0: GSM modem (1-port) converter detected
[ 4834.231365] usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB0
[ 4834.231496] option 1-1.4:1.1: GSM modem (1-port) converter detected
[ 4834.231599] usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB1
[ 4834.231703] usb-storage 1-1.4:1.2: USB Mass Storage device detected
[ 4834.231831] scsi11 : usb-storage 1-1.4:1.2
[ 4834.232050] option 1-1.4:1.3: GSM modem (1-port) converter detected
[ 4834.232212] usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB2
[ 4834.233650] qmi_wwan 1-1.4:1.4: cdc-wdm1: USB WDM device
[ 4834.233906] qmi_wwan 1-1.4:1.4 wwan0: register 'qmi_wwan' at usb-0000:00:1a.0-1.4, WWAN/QMI device, 5a:b9:fa:33:4b:99
[ 4835.229697] scsi 11:0:0:0: CD-ROM            ZTE      USB SCSI CD-ROM  2.31 PQ: 0 ANSI: 2
[ 4835.230423] scsi 11:0:0:1: Direct-Access     ZTE      MMC Storage      2.31 PQ: 0 ANSI: 2
[ 4835.233942] sr1: scsi-1 drive
[ 4835.234095] sr 11:0:0:0: Attached scsi CD-ROM sr1
[ 4835.234176] sr 11:0:0:0: Attached scsi generic sg2 type 5
[ 4835.235696] sd 11:0:0:1: Attached scsi generic sg3 type 0
[ 4835.241552] sd 11:0:0:1: [sdb] Attached SCSI removable disk
[ 4835.305189] sr 11:0:0:0: ioctl_internal_command return code = 8070000
[ 4835.305194]    : Sense Key : Hardware Error [current]
[ 4835.305197]    : Add. Sense: No additional sense information
[ 4835.513215] sr 11:0:0:0: ioctl_internal_command return code = 8070000
[ 4835.513220]    : Sense Key : Hardware Error [current]
[ 4835.513222]    : Add. Sense: No additional sense information
[ 4957.028645] option1 ttyUSB2: option_instat_callback: error -71
[ 4957.082057] usb 1-1.4: USB disconnect, device number 8
[ 4957.082389] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[ 4957.082416] option 1-1.4:1.0: device disconnected
[ 4957.082732] option1 ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 4957.082740] option1 ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 4957.082746] option1 ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 4957.082753] option1 ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 4957.082929] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[ 4957.082950] option 1-1.4:1.1: device disconnected
[ 4957.083986] option1 ttyUSB2: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 4957.088239] option1 ttyUSB2: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 4957.092490] option1 ttyUSB2: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 4957.093887] option1 ttyUSB2: option_instat_callback: error -108
[ 4957.095858] option1 ttyUSB2: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 4957.097368] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[ 4957.097383] option 1-1.4:1.3: device disconnected
[ 4957.097471] qmi_wwan 1-1.4:1.4 wwan0: unregister 'qmi_wwan' usb-0000:00:1a.0-1.4, WWAN/QMI device
[ 4971.084720] usb 2-1.2: new high-speed USB device number 7 using ehci-pci
[ 4971.177568] usb 2-1.2: New USB device found, idVendor=0fce, idProduct=714f
[ 4971.177576] usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[ 4971.177581] usb 2-1.2: Product: LT15i
[ 4971.177585] usb 2-1.2: Manufacturer: Sony
[ 4971.177588] usb 2-1.2: SerialNumber: CB5A1FXTTB
[ 4971.179456] rndis_host 2-1.2:1.0 usb0: register 'rndis_host' at usb-0000:00:1d.0-1.2, RNDIS device, c6:bc:4d:a2:7c:ae
[ 5108.283911] type=1400 audit(1391851034.051:74): apparmor="STATUS" operation="profile_replace" parent=5469 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=5473 comm="apparmor_parser"
[ 5108.283931] type=1400 audit(1391851034.051:75): apparmor="STATUS" operation="profile_replace" parent=5469 profile="unconfined" name="/usr/sbin/cupsd" pid=5473 comm="apparmor_parser"
[ 5108.285368] type=1400 audit(1391851034.055:76): apparmor="STATUS" operation="profile_replace" parent=5469 profile="unconfined" name="/usr/sbin/cupsd" pid=5473 comm="apparmor_parser"
[ 5135.767028] usb 2-1.2: USB disconnect, device number 7
[ 5135.769283] rndis_host 2-1.2:1.0 usb0: unregister 'rndis_host' usb-0000:00:1d.0-1.2, RNDIS device
[ 5136.475723] usb 2-1.2: new high-speed USB device number 8 using ehci-pci
[ 5136.568876] usb 2-1.2: New USB device found, idVendor=0fce, idProduct=014f
[ 5136.568885] usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[ 5136.568889] usb 2-1.2: Product: LT15i
[ 5136.568893] usb 2-1.2: Manufacturer: Sony
[ 5136.568896] usb 2-1.2: SerialNumber: CB5A1FXTTB
[ 5142.061503] systemd-hostnamed[5602]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 5162.393732] usb 2-1.2: USB disconnect, device number 8
[ 5162.593977] usb 2-1.2: new high-speed USB device number 9 using ehci-pci
[ 5162.687224] usb 2-1.2: New USB device found, idVendor=0fce, idProduct=714f
[ 5162.687233] usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[ 5162.687237] usb 2-1.2: Product: LT15i
[ 5162.687241] usb 2-1.2: Manufacturer: Sony
[ 5162.687244] usb 2-1.2: SerialNumber: CB5A1FXTTB
[ 5162.689261] rndis_host 2-1.2:1.0 usb0: register 'rndis_host' at usb-0000:00:1d.0-1.2, RNDIS device, e2:4b:72:10:d0:fa
[ 5458.868400] usb 2-1.2: USB disconnect, device number 9
[ 5458.870632] rndis_host 2-1.2:1.0 usb0: unregister 'rndis_host' usb-0000:00:1d.0-1.2, RNDIS device
[ 5459.580984] usb 2-1.2: new high-speed USB device number 10 using ehci-pci
[ 5459.674332] usb 2-1.2: New USB device found, idVendor=0fce, idProduct=014f
[ 5459.674340] usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[ 5459.674344] usb 2-1.2: Product: LT15i
[ 5459.674348] usb 2-1.2: Manufacturer: Sony
[ 5459.674352] usb 2-1.2: SerialNumber: CB5A1FXTTB
[ 5460.650085] systemd-hostnamed[6040]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 5464.501469] usb 2-1.2: USB disconnect, device number 10
[ 5464.705315] usb 2-1.2: new high-speed USB device number 11 using ehci-pci
[ 5464.798294] usb 2-1.2: New USB device found, idVendor=0fce, idProduct=714f
[ 5464.798302] usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[ 5464.798306] usb 2-1.2: Product: LT15i
[ 5464.798310] usb 2-1.2: Manufacturer: Sony
[ 5464.798313] usb 2-1.2: SerialNumber: CB5A1FXTTB
[ 5464.800227] rndis_host 2-1.2:1.0 usb0: register 'rndis_host' at usb-0000:00:1d.0-1.2, RNDIS device, 1a:88:b6:3f:e5:8c
[ 5994.778914] systemd-hostnamed[6331]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 6571.753755] usb 1-1.4: new high-speed USB device number 9 using ehci-pci
[ 6571.848574] usb 1-1.4: New USB device found, idVendor=19d2, idProduct=2000
[ 6571.848583] usb 1-1.4: New USB device strings: Mfr=3, Product=2, SerialNumber=4
[ 6571.848587] usb 1-1.4: Product: ZTE WCDMA Technologies MSM
[ 6571.848591] usb 1-1.4: Manufacturer: ZTE,Incorporated
[ 6571.848594] usb 1-1.4: SerialNumber: MF6670AVED010000
[ 6571.851163] usb-storage 1-1.4:1.0: USB Mass Storage device detected
[ 6571.851291] scsi12 : usb-storage 1-1.4:1.0
[ 6572.851055] scsi 12:0:0:0: CD-ROM            ZTE      USB SCSI CD-ROM  2.31 PQ: 0 ANSI: 2
[ 6572.851693] scsi 12:0:0:1: Direct-Access     ZTE      MMC Storage      2.31 PQ: 0 ANSI: 2
[ 6572.854320] sr1: scsi-1 drive
[ 6572.856045] sr 12:0:0:0: Attached scsi CD-ROM sr1
[ 6572.856184] sr 12:0:0:0: Attached scsi generic sg2 type 5
[ 6572.856547] sd 12:0:0:1: Attached scsi generic sg3 type 0
[ 6572.876022] sd 12:0:0:1: [sdb] Attached SCSI removable disk
[ 6572.930484] sr 12:0:0:0: ioctl_internal_command return code = 8070000
[ 6572.930492]    : Sense Key : Hardware Error [current]
[ 6572.930497]    : Add. Sense: No additional sense information
[ 6572.950040] systemd-udevd[6552]: Failed to apply ACL on /dev/sr1: No such file or directory
[ 6572.950050] systemd-udevd[6552]: Failed to apply ACL on /dev/sr1: No such file or directory
[ 6572.952969] systemd-udevd[6552]: Failed to apply ACL on /dev/sr1: No such file or directory
[ 6572.952978] systemd-udevd[6552]: Failed to apply ACL on /dev/sr1: No such file or directory
[ 6574.677228] usb 1-1.4: USB disconnect, device number 9
[ 6577.946149] usb 1-1.4: new high-speed USB device number 10 using ehci-pci
[ 6578.041424] usb 1-1.4: New USB device found, idVendor=19d2, idProduct=0031
[ 6578.041432] usb 1-1.4: New USB device strings: Mfr=3, Product=2, SerialNumber=4
[ 6578.041436] usb 1-1.4: Product: ZTE WCDMA Technologies MSM
[ 6578.041440] usb 1-1.4: Manufacturer: ZTE,Incorporated
[ 6578.041443] usb 1-1.4: SerialNumber: MF6670AVED010000
[ 6578.045003] option 1-1.4:1.0: GSM modem (1-port) converter detected
[ 6578.045137] usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB0
[ 6578.045281] option 1-1.4:1.1: GSM modem (1-port) converter detected
[ 6578.045386] usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB1
[ 6578.045488] usb-storage 1-1.4:1.2: USB Mass Storage device detected
[ 6578.045612] scsi13 : usb-storage 1-1.4:1.2
[ 6578.045835] option 1-1.4:1.3: GSM modem (1-port) converter detected
[ 6578.045990] usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB2
[ 6578.047549] qmi_wwan 1-1.4:1.4: cdc-wdm1: USB WDM device
[ 6578.047806] qmi_wwan 1-1.4:1.4 wwan0: register 'qmi_wwan' at usb-0000:00:1a.0-1.4, WWAN/QMI device, 5a:b9:fa:33:4b:99
[ 6579.043480] scsi 13:0:0:0: CD-ROM            ZTE      USB SCSI CD-ROM  2.31 PQ: 0 ANSI: 2
[ 6579.044095] scsi 13:0:0:1: Direct-Access     ZTE      MMC Storage      2.31 PQ: 0 ANSI: 2
[ 6579.046705] sr1: scsi-1 drive
[ 6579.046830] sr 13:0:0:0: Attached scsi CD-ROM sr1
[ 6579.046919] sr 13:0:0:0: Attached scsi generic sg2 type 5
[ 6579.047102] sd 13:0:0:1: Attached scsi generic sg3 type 0
[ 6579.052731] sd 13:0:0:1: [sdb] Attached SCSI removable disk
[ 6579.118958] sr 13:0:0:0: ioctl_internal_command return code = 8070000
[ 6579.118963]    : Sense Key : Hardware Error [current]
[ 6579.118966]    : Add. Sense: No additional sense information
[ 6579.331248] sr 13:0:0:0: ioctl_internal_command return code = 8070000
[ 6579.331253]    : Sense Key : Hardware Error [current]
[ 6579.331256]    : Add. Sense: No additional sense information
[ 6582.141557] ISO 9660 Extensions: Microsoft Joliet Level 1
[ 6582.151062] ISOFS: changing to secondary root
[ 6677.795212] usb 2-1.2: USB disconnect, device number 11
[ 6677.797448] rndis_host 2-1.2:1.0 usb0: unregister 'rndis_host' usb-0000:00:1d.0-1.2, RNDIS device
[ 6750.191327] usb 2-1.2: new high-speed USB device number 12 using ehci-pci
[ 6750.284181] usb 2-1.2: New USB device found, idVendor=0fce, idProduct=014f
[ 6750.284190] usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[ 6750.284195] usb 2-1.2: Product: LT15i
[ 6750.284198] usb 2-1.2: Manufacturer: Sony
[ 6750.284202] usb 2-1.2: SerialNumber: CB5A1FXTTB
[ 6751.820186] systemd-hostnamed[7025]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 6817.840233] usb 2-1.2: USB disconnect, device number 12
[ 6818.135507] usb 2-1.2: new high-speed USB device number 13 using ehci-pci
[ 6818.228605] usb 2-1.2: New USB device found, idVendor=0fce, idProduct=714f
[ 6818.228613] usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[ 6818.228618] usb 2-1.2: Product: LT15i
[ 6818.228621] usb 2-1.2: Manufacturer: Sony
[ 6818.228625] usb 2-1.2: SerialNumber: CB5A1FXTTB
[ 6818.230490] rndis_host 2-1.2:1.0 usb0: register 'rndis_host' at usb-0000:00:1d.0-1.2, RNDIS device, d2:59:d6:8b:6c:9f
[ 9785.208962] usb 1-1.4: USB disconnect, device number 10
[ 9785.209253] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[ 9785.209281] option 1-1.4:1.0: device disconnected
[ 9785.209557] option1 ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 9785.209566] option1 ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 9785.209571] option1 ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 9785.209575] option1 ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 9785.209875] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[ 9785.209897] option 1-1.4:1.1: device disconnected
[ 9785.210029] option1 ttyUSB2: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 9785.214284] option1 ttyUSB2: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 9785.218536] option1 ttyUSB2: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 9785.221162] option1 ttyUSB2: option_instat_callback: error -108
[ 9785.221656] option1 ttyUSB2: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 9785.222023] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[ 9785.222047] option 1-1.4:1.3: device disconnected
[ 9785.222204] qmi_wwan 1-1.4:1.4 wwan0: unregister 'qmi_wwan' usb-0000:00:1a.0-1.4, WWAN/QMI device
[ 9851.939117] usb 1-1.4: new high-speed USB device number 11 using ehci-pci
[ 9852.034277] usb 1-1.4: New USB device found, idVendor=19d2, idProduct=2000
[ 9852.034286] usb 1-1.4: New USB device strings: Mfr=3, Product=2, SerialNumber=4
[ 9852.034290] usb 1-1.4: Product: ZTE WCDMA Technologies MSM
[ 9852.034294] usb 1-1.4: Manufacturer: ZTE,Incorporated
[ 9852.034297] usb 1-1.4: SerialNumber: MF6670AVED010000
[ 9852.036729] usb-storage 1-1.4:1.0: USB Mass Storage device detected
[ 9852.036871] scsi14 : usb-storage 1-1.4:1.0
[ 9853.036225] scsi 14:0:0:0: CD-ROM            ZTE      USB SCSI CD-ROM  2.31 PQ: 0 ANSI: 2
[ 9853.036958] scsi 14:0:0:1: Direct-Access     ZTE      MMC Storage      2.31 PQ: 0 ANSI: 2
[ 9853.039244] sr1: scsi-1 drive
[ 9853.039518] sr 14:0:0:0: Attached scsi CD-ROM sr1
[ 9853.039660] sr 14:0:0:0: Attached scsi generic sg2 type 5
[ 9853.040012] sd 14:0:0:1: Attached scsi generic sg3 type 0
[ 9853.048990] sd 14:0:0:1: [sdb] Attached SCSI removable disk
[ 9853.103530] sr 14:0:0:0: ioctl_internal_command return code = 8070000
[ 9853.103540]    : Sense Key : Hardware Error [current]
[ 9853.103546]    : Add. Sense: No additional sense information
[ 9853.123688] Buffer I/O error on device sr1, logical block 4
[ 9853.123701] Buffer I/O error on device sr1, logical block 5
[ 9853.123709] Buffer I/O error on device sr1, logical block 4
[ 9853.123716] Buffer I/O error on device sr1, logical block 5
[ 9853.123740] Buffer I/O error on device sr1, logical block 32
[ 9853.123747] Buffer I/O error on device sr1, logical block 33
[ 9853.123755] Buffer I/O error on device sr1, logical block 32
[ 9853.123760] Buffer I/O error on device sr1, logical block 33
[ 9853.123772] Buffer I/O error on device sr1, logical block 32
[ 9853.123777] Buffer I/O error on device sr1, logical block 33
[ 9853.127619] systemd-udevd[9320]: Failed to apply ACL on /dev/sr1: No such file or directory
[ 9853.127636] systemd-udevd[9320]: Failed to apply ACL on /dev/sr1: No such file or directory
[ 9853.146067] systemd-udevd[9305]: Failed to apply ACL on /dev/sr1: No such file or directory
[ 9853.146084] systemd-udevd[9305]: Failed to apply ACL on /dev/sr1: No such file or directory
[ 9854.844814] usb 1-1.4: USB disconnect, device number 11
[ 9858.116625] usb 1-1.4: new high-speed USB device number 12 using ehci-pci
[ 9858.212130] usb 1-1.4: New USB device found, idVendor=19d2, idProduct=0031
[ 9858.212138] usb 1-1.4: New USB device strings: Mfr=3, Product=2, SerialNumber=4
[ 9858.212143] usb 1-1.4: Product: ZTE WCDMA Technologies MSM
[ 9858.212147] usb 1-1.4: Manufacturer: ZTE,Incorporated
[ 9858.212150] usb 1-1.4: SerialNumber: MF6670AVED010000
[ 9858.215978] option 1-1.4:1.0: GSM modem (1-port) converter detected
[ 9858.216116] usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB0
[ 9858.216246] option 1-1.4:1.1: GSM modem (1-port) converter detected
[ 9858.216341] usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB1
[ 9858.216477] usb-storage 1-1.4:1.2: USB Mass Storage device detected
[ 9858.216585] scsi15 : usb-storage 1-1.4:1.2
[ 9858.216845] option 1-1.4:1.3: GSM modem (1-port) converter detected
[ 9858.216967] usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB2
[ 9858.218287] qmi_wwan 1-1.4:1.4: cdc-wdm1: USB WDM device
[ 9858.218537] qmi_wwan 1-1.4:1.4 wwan0: register 'qmi_wwan' at usb-0000:00:1a.0-1.4, WWAN/QMI device, 5a:b9:fa:33:4b:99
[ 9859.217423] scsi 15:0:0:0: CD-ROM            ZTE      USB SCSI CD-ROM  2.31 PQ: 0 ANSI: 2
[ 9859.218033] scsi 15:0:0:1: Direct-Access     ZTE      MMC Storage      2.31 PQ: 0 ANSI: 2
[ 9859.220317] sr1: scsi-1 drive
[ 9859.220460] sr 15:0:0:0: Attached scsi CD-ROM sr1
[ 9859.221773] sr 15:0:0:0: Attached scsi generic sg2 type 5
[ 9859.222740] sd 15:0:0:1: Attached scsi generic sg3 type 0
[ 9859.226403] sd 15:0:0:1: [sdb] Attached SCSI removable disk
[ 9859.297045] sr 15:0:0:0: ioctl_internal_command return code = 8070000
[ 9859.297050]    : Sense Key : Hardware Error [current]
[ 9859.297053]    : Add. Sense: No additional sense information
[ 9859.496820] sr 15:0:0:0: ioctl_internal_command return code = 8070000
[ 9859.496825]    : Sense Key : Hardware Error [current]
[ 9859.496828]    : Add. Sense: No additional sense information
[ 9860.956582] option1 ttyUSB2: option_instat_callback: error -71
[ 9860.988967] usb 1-1.4: USB disconnect, device number 12
[ 9860.989338] option1 ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 9860.989364] option1 ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 9860.989371] option1 ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 9860.989376] option1 ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 9860.989591] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[ 9860.989615] option 1-1.4:1.0: device disconnected
[ 9860.989919] option1 ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 9860.989927] option1 ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 9860.989933] option1 ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 9860.989941] option1 ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 9860.991811] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[ 9860.991830] option 1-1.4:1.1: device disconnected
[ 9860.992548] option1 ttyUSB2: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 9860.995264] option1 ttyUSB2: option_instat_callback: error -108
[ 9860.995544] option1 ttyUSB2: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 9860.995553] option1 ttyUSB2: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 9860.995559] option1 ttyUSB2: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 9860.995744] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[ 9860.995767] option 1-1.4:1.3: device disconnected
[ 9860.995969] qmi_wwan 1-1.4:1.4 wwan0: unregister 'qmi_wwan' usb-0000:00:1a.0-1.4, WWAN/QMI device
[ 9881.994919] usb 1-1.4: new high-speed USB device number 13 using ehci-pci
[ 9882.090132] usb 1-1.4: New USB device found, idVendor=19d2, idProduct=2000
[ 9882.090140] usb 1-1.4: New USB device strings: Mfr=3, Product=2, SerialNumber=4
[ 9882.090144] usb 1-1.4: Product: ZTE WCDMA Technologies MSM
[ 9882.090148] usb 1-1.4: Manufacturer: ZTE,Incorporated
[ 9882.090151] usb 1-1.4: SerialNumber: MF6670AVED010000
[ 9882.092602] usb-storage 1-1.4:1.0: USB Mass Storage device detected
[ 9882.092786] scsi16 : usb-storage 1-1.4:1.0
[ 9883.092428] scsi 16:0:0:0: CD-ROM            ZTE      USB SCSI CD-ROM  2.31 PQ: 0 ANSI: 2
[ 9883.093634] scsi 16:0:0:1: Direct-Access     ZTE      MMC Storage      2.31 PQ: 0 ANSI: 2
[ 9883.097102] sr1: scsi-1 drive
[ 9883.097408] sr 16:0:0:0: Attached scsi CD-ROM sr1
[ 9883.097579] sr 16:0:0:0: Attached scsi generic sg2 type 5
[ 9883.097943] sd 16:0:0:1: Attached scsi generic sg3 type 0
[ 9883.102849] sd 16:0:0:1: [sdb] Attached SCSI removable disk
[ 9883.167276] sr 16:0:0:0: ioctl_internal_command return code = 8070000
[ 9883.167283]    : Sense Key : Hardware Error [current]
[ 9883.167289]    : Add. Sense: No additional sense information
[ 9883.189314] quiet_error: 44 callbacks suppressed
[ 9883.189322] Buffer I/O error on device sr1, logical block 4
[ 9883.189328] Buffer I/O error on device sr1, logical block 5
[ 9883.189334] Buffer I/O error on device sr1, logical block 4
[ 9883.189338] Buffer I/O error on device sr1, logical block 5
[ 9883.189351] Buffer I/O error on device sr1, logical block 32
[ 9883.189355] Buffer I/O error on device sr1, logical block 33
[ 9883.189359] Buffer I/O error on device sr1, logical block 32
[ 9883.189363] Buffer I/O error on device sr1, logical block 33
[ 9883.189369] Buffer I/O error on device sr1, logical block 32
[ 9883.189372] Buffer I/O error on device sr1, logical block 33
[ 9883.195145] systemd-udevd[9421]: Failed to apply ACL on /dev/sr1: No such file or directory
[ 9883.195162] systemd-udevd[9421]: Failed to apply ACL on /dev/sr1: No such file or directory
[ 9883.204916] systemd-udevd[9407]: Failed to apply ACL on /dev/sr1: No such file or directory
[ 9883.204925] systemd-udevd[9407]: Failed to apply ACL on /dev/sr1: No such file or directory
[ 9884.921280] usb 1-1.4: USB disconnect, device number 13
[ 9888.196316] usb 1-1.4: new high-speed USB device number 14 using ehci-pci
[ 9888.291700] usb 1-1.4: New USB device found, idVendor=19d2, idProduct=0031
[ 9888.291708] usb 1-1.4: New USB device strings: Mfr=3, Product=2, SerialNumber=4
[ 9888.291712] usb 1-1.4: Product: ZTE WCDMA Technologies MSM
[ 9888.291716] usb 1-1.4: Manufacturer: ZTE,Incorporated
[ 9888.291719] usb 1-1.4: SerialNumber: MF6670AVED010000
[ 9888.295446] option 1-1.4:1.0: GSM modem (1-port) converter detected
[ 9888.295580] usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB0
[ 9888.295749] option 1-1.4:1.1: GSM modem (1-port) converter detected
[ 9888.295966] usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB1
[ 9888.296116] usb-storage 1-1.4:1.2: USB Mass Storage device detected
[ 9888.296385] scsi17 : usb-storage 1-1.4:1.2
[ 9888.296657] option 1-1.4:1.3: GSM modem (1-port) converter detected
[ 9888.296824] usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB2
[ 9888.298399] qmi_wwan 1-1.4:1.4: cdc-wdm1: USB WDM device
[ 9888.298668] qmi_wwan 1-1.4:1.4 wwan0: register 'qmi_wwan' at usb-0000:00:1a.0-1.4, WWAN/QMI device, 5a:b9:fa:33:4b:99
[ 9889.297041] scsi 17:0:0:0: CD-ROM            ZTE      USB SCSI CD-ROM  2.31 PQ: 0 ANSI: 2
[ 9889.297652] scsi 17:0:0:1: Direct-Access     ZTE      MMC Storage      2.31 PQ: 0 ANSI: 2
[ 9889.300009] sr1: scsi-1 drive
[ 9889.300139] sr 17:0:0:0: Attached scsi CD-ROM sr1
[ 9889.300239] sr 17:0:0:0: Attached scsi generic sg2 type 5
[ 9889.300468] sd 17:0:0:1: Attached scsi generic sg3 type 0
[ 9889.315015] sd 17:0:0:1: [sdb] Attached SCSI removable disk
[ 9889.376662] sr 17:0:0:0: ioctl_internal_command return code = 8070000
[ 9889.376667]    : Sense Key : Hardware Error [current]
[ 9889.376670]    : Add. Sense: No additional sense information
[ 9889.584559] sr 17:0:0:0: ioctl_internal_command return code = 8070000
[ 9889.584563]    : Sense Key : Hardware Error [current]
[ 9889.584566]    : Add. Sense: No additional sense information
[10015.570649] usb 2-1.2: USB disconnect, device number 13
[10015.572012] rndis_host 2-1.2:1.0 usb0: unregister 'rndis_host' usb-0000:00:1d.0-1.2, RNDIS device
[10210.326747] usb 1-1.4: USB disconnect, device number 14
[10210.326951] option1 ttyUSB2: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[10210.327110] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[10210.327139] option 1-1.4:1.0: device disconnected
[10210.327178] option1 ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[10210.327427] option1 ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[10210.327437] option1 ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[10210.327445] option1 ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[10210.327636] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[10210.327659] option 1-1.4:1.1: device disconnected
[10210.331185] option1 ttyUSB2: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[10210.334558] option1 ttyUSB2: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[10210.336559] option1 ttyUSB2: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[10210.340440] option1 ttyUSB2: option_instat_callback: error -108
[10210.341574] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[10210.341610] option 1-1.4:1.3: device disconnected
[10210.341847] qmi_wwan 1-1.4:1.4 wwan0: unregister 'qmi_wwan' usb-0000:00:1a.0-1.4, WWAN/QMI device
[10224.195080] usb 1-1.4: new high-speed USB device number 15 using ehci-pci
[10224.290373] usb 1-1.4: New USB device found, idVendor=19d2, idProduct=2000
[10224.290380] usb 1-1.4: New USB device strings: Mfr=3, Product=2, SerialNumber=4
[10224.290385] usb 1-1.4: Product: ZTE WCDMA Technologies MSM
[10224.290389] usb 1-1.4: Manufacturer: ZTE,Incorporated
[10224.290392] usb 1-1.4: SerialNumber: MF6670AVED010000
[10224.292956] usb-storage 1-1.4:1.0: USB Mass Storage device detected
[10224.293119] scsi18 : usb-storage 1-1.4:1.0
[10225.292627] scsi 18:0:0:0: CD-ROM            ZTE      USB SCSI CD-ROM  2.31 PQ: 0 ANSI: 2
[10225.293359] scsi 18:0:0:1: Direct-Access     ZTE      MMC Storage      2.31 PQ: 0 ANSI: 2
[10225.295707] sr1: scsi-1 drive
[10225.296798] sr 18:0:0:0: Attached scsi CD-ROM sr1
[10225.297535] sr 18:0:0:0: Attached scsi generic sg2 type 5
[10225.302892] sd 18:0:0:1: Attached scsi generic sg3 type 0
[10225.304374] sd 18:0:0:1: [sdb] Attached SCSI removable disk
[10225.368255] sr 18:0:0:0: ioctl_internal_command return code = 8070000
[10225.368261]    : Sense Key : Hardware Error [current]
[10225.368267]    : Add. Sense: No additional sense information
[10225.387542] quiet_error: 44 callbacks suppressed
[10225.387551] Buffer I/O error on device sr1, logical block 4
[10225.387559] Buffer I/O error on device sr1, logical block 5
[10225.387566] Buffer I/O error on device sr1, logical block 4
[10225.387571] Buffer I/O error on device sr1, logical block 5
[10225.387589] Buffer I/O error on device sr1, logical block 32
[10225.387594] Buffer I/O error on device sr1, logical block 33
[10225.387600] Buffer I/O error on device sr1, logical block 32
[10225.387605] Buffer I/O error on device sr1, logical block 33
[10225.387614] Buffer I/O error on device sr1, logical block 32
[10225.387619] Buffer I/O error on device sr1, logical block 33
[10225.392665] systemd-udevd[9691]: Failed to apply ACL on /dev/sr1: No such file or directory
[10225.392682] systemd-udevd[9691]: Failed to apply ACL on /dev/sr1: No such file or directory
[10225.400194] systemd-udevd[9691]: Failed to apply ACL on /dev/sr1: No such file or directory
[10225.400203] systemd-udevd[9691]: Failed to apply ACL on /dev/sr1: No such file or directory
[10227.111493] usb 1-1.4: USB disconnect, device number 15
[10230.383680] usb 1-1.4: new high-speed USB device number 16 using ehci-pci
[10230.479186] usb 1-1.4: New USB device found, idVendor=19d2, idProduct=0031
[10230.479194] usb 1-1.4: New USB device strings: Mfr=3, Product=2, SerialNumber=4
[10230.479198] usb 1-1.4: Product: ZTE WCDMA Technologies MSM
[10230.479202] usb 1-1.4: Manufacturer: ZTE,Incorporated
[10230.479206] usb 1-1.4: SerialNumber: MF6670AVED010000
[10230.482919] option 1-1.4:1.0: GSM modem (1-port) converter detected
[10230.483059] usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB0
[10230.483188] option 1-1.4:1.1: GSM modem (1-port) converter detected
[10230.483303] usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB1
[10230.483394] usb-storage 1-1.4:1.2: USB Mass Storage device detected
[10230.483519] scsi19 : usb-storage 1-1.4:1.2
[10230.483734] option 1-1.4:1.3: GSM modem (1-port) converter detected
[10230.483856] usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB2
[10230.485554] qmi_wwan 1-1.4:1.4: cdc-wdm1: USB WDM device
[10230.485820] qmi_wwan 1-1.4:1.4 wwan0: register 'qmi_wwan' at usb-0000:00:1a.0-1.4, WWAN/QMI device, 5a:b9:fa:33:4b:99
[10231.485043] scsi 19:0:0:0: CD-ROM            ZTE      USB SCSI CD-ROM  2.31 PQ: 0 ANSI: 2
[10231.485759] scsi 19:0:0:1: Direct-Access     ZTE      MMC Storage      2.31 PQ: 0 ANSI: 2
[10231.487997] sr1: scsi-1 drive
[10231.488142] sr 19:0:0:0: Attached scsi CD-ROM sr1
[10231.488213] sr 19:0:0:0: Attached scsi generic sg2 type 5
[10231.488334] sd 19:0:0:1: Attached scsi generic sg3 type 0
[10231.495745] sd 19:0:0:1: [sdb] Attached SCSI removable disk
[10231.556643] sr 19:0:0:0: ioctl_internal_command return code = 8070000
[10231.556648]    : Sense Key : Hardware Error [current]
[10231.556651]    : Add. Sense: No additional sense information
[10231.777163] sr 19:0:0:0: ioctl_internal_command return code = 8070000
[10231.777168]    : Sense Key : Hardware Error [current]
[10231.777171]    : Add. Sense: No additional sense information
[10421.433046] usb 1-1.4: USB disconnect, device number 16
[10421.433363] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[10421.433397] option 1-1.4:1.0: device disconnected
[10421.433744] option1 ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[10421.433753] option1 ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[10421.433759] option1 ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[10421.433764] option1 ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[10421.433928] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[10421.433948] option 1-1.4:1.1: device disconnected
[10421.435624] option1 ttyUSB2: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[10421.439876] option1 ttyUSB2: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[10421.441834] option1 ttyUSB2: option_instat_callback: error -108
[10421.444126] option1 ttyUSB2: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[10421.445119] option1 ttyUSB2: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[10421.445259] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[10421.445271] option 1-1.4:1.3: device disconnected
[10421.445370] qmi_wwan 1-1.4:1.4 wwan0: unregister 'qmi_wwan' usb-0000:00:1a.0-1.4, WWAN/QMI device
[10474.286892] systemd-hostnamed[10043]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[10913.819534] PM: Syncing filesystems ... done.
[10913.905735] PM: Preparing system for mem sleep
[10914.026254] Freezing user space processes ... (elapsed 0.002 seconds) done.
[10914.028286] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[10914.029589] PM: Entering mem sleep
[10914.029684] Suspending console(s) (use no_console_suspend to debug)
[10914.030253] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[10914.030324] sd 0:0:0:0: [sda] Stopping disk
[10914.082000] mei_me 0000:00:16.0: suspend
[10914.205915] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D3cold
[10914.773612] PM: suspend of devices complete after 743.704 msecs
[10914.773870] PM: late suspend of devices complete after 0.254 msecs
[10914.774057] r8169 0000:45:00.0: System wakeup enabled by ACPI
[10914.789618] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[10914.805686] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[10914.837535] PM: noirq suspend of devices complete after 63.656 msecs
[10914.837790] ACPI: Preparing to enter system sleep state S3
[10914.848458] PM: Saving platform NVS memory
[10914.849206] Disabling non-boot CPUs ...
[10914.953473] smpboot: CPU 1 is now offline
[10915.057476] smpboot: CPU 2 is now offline
[10915.058072] Broke affinity for irq 16
[10915.161487] smpboot: CPU 3 is now offline
[10915.162617] ACPI: Low-level resume complete
[10915.162662] PM: Restoring platform NVS memory
[10915.163319] Enabling non-boot CPUs ...
[10915.163364] smpboot: Booting Node 0 Processor 1 APIC 0x1
[10915.176874] CPU1 is up
[10915.176896] smpboot: Booting Node 0 Processor 2 APIC 0x4
[10915.190358] CPU2 is up
[10915.190379] smpboot: Booting Node 0 Processor 3 APIC 0x5
[10915.203872] CPU3 is up
[10915.206267] ACPI: Waking up from system sleep state S3
[10915.290887] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[10915.295711] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
[10915.326886] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[10915.407059] PM: noirq resume of devices complete after 147.770 msecs
[10915.407215] PM: early resume of devices complete after 0.124 msecs
[10915.407273] mei_me 0000:00:16.0: irq 47 for MSI/MSI-X
[10915.407346] pci 0000:00:1e.0: setting latency timer to 64
[10915.407359] ahci 0000:00:1f.2: setting latency timer to 64
[10915.407459] ehci-pci 0000:00:1a.0: setting latency timer to 64
[10915.412603] [drm] PCIE GART of 512M enabled (table at 0x000000000025D000).
[10915.412665] ehci-pci 0000:00:1d.0: setting latency timer to 64
[10915.412691] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
[10915.412811] radeon 0000:01:00.0: WB enabled
[10915.412814] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88012f242c00
[10915.412815] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88012f242c0c
[10915.412965] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[10915.413562] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc90010f9c418
[10915.429949] [drm] ring test on 0 succeeded in 1 usecs
[10915.430007] [drm] ring test on 3 succeeded in 1 usecs
[10915.510891] pciehp 0000:00:1c.5:pcie04: Device 0000:45:00.0 already exists at 0000:45:00, cannot hot-add
[10915.510894] pciehp 0000:00:1c.5:pcie04: Cannot add device at 0000:45:00
[10915.510917] r8169 0000:45:00.0: System wakeup disabled by ACPI
[10915.614980] usb 1-1.5: reset high-speed USB device number 3 using ehci-pci
[10915.615612] [drm] ring test on 5 succeeded in 1 usecs
[10915.615614] [drm] UVD initialized successfully.
[10915.615652] [drm] ib test on ring 0 succeeded in 0 usecs
[10915.615685] [drm] ib test on ring 3 succeeded in 1 usecs
[10915.738919] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[10915.741431] ata2.00: unexpected _GTF length (8)
[10915.744198] ata2.00: unexpected _GTF length (8)
[10915.744201] ata2.00: configured for UDMA/100
[10915.746917] ata5: SATA link down (SStatus 0 SControl 300)
[10915.766112] [drm] ib test on ring 5 succeeded
[10918.195167] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[10918.196077] ata1.00: unexpected _GTF length (8)
[10918.206944] ata1.00: unexpected _GTF length (8)
[10918.207259] ata1.00: configured for UDMA/100
[10918.223232] sd 0:0:0:0: [sda] Starting disk
[10918.283315] PM: resume of devices complete after 2875.834 msecs
[10918.283612] PM: Finishing wakeup.
[10918.283613] Restarting tasks ... done.
[10918.287569] video LNXVIDEO:00: Restoring backlight state
[10918.363197] usb 2-1.4: new high-speed USB device number 14 using ehci-pci
[10918.704478] r8169 0000:45:00.0 eth0: link down
[10918.704523] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[10918.713735] usb 2-1.4: New USB device found, idVendor=0bda, idProduct=0138
[10918.713742] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[10918.713745] usb 2-1.4: Product: USB2.0-CRW
[10918.713747] usb 2-1.4: Manufacturer: Generic
[10918.713750] usb 2-1.4: SerialNumber: 20090516388200000
[10918.723136] ums-realtek 2-1.4:1.0: USB Mass Storage device detected
[10918.742026] scsi20 : usb-storage 2-1.4:1.0
[10918.743246] usb 2-1.4: USB disconnect, device number 14
[10932.272633] usb 1-1.4: new high-speed USB device number 17 using ehci-pci
[10932.366150] usb 1-1.4: New USB device found, idVendor=0fce, idProduct=014f
[10932.366157] usb 1-1.4: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[10932.366162] usb 1-1.4: Product: LT15i
[10932.366165] usb 1-1.4: Manufacturer: Sony
[10932.366169] usb 1-1.4: SerialNumber: CB5A1FXTTB
[10933.532549] systemd-hostnamed[10796]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[10948.344609] usb 1-1.4: USB disconnect, device number 17
[10948.546142] usb 1-1.4: new high-speed USB device number 18 using ehci-pci
[10948.639525] usb 1-1.4: New USB device found, idVendor=0fce, idProduct=714f
[10948.639531] usb 1-1.4: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[10948.639534] usb 1-1.4: Product: LT15i
[10948.639537] usb 1-1.4: Manufacturer: Sony
[10948.639540] usb 1-1.4: SerialNumber: CB5A1FXTTB
[10948.641656] rndis_host 1-1.4:1.0 usb0: register 'rndis_host' at usb-0000:00:1a.0-1.4, RNDIS device, 32:c2:2f:3b:8f:c2
[11132.169173] usb 1-1.4: USB disconnect, device number 18
[11132.170526] rndis_host 1-1.4:1.0 usb0: unregister 'rndis_host' usb-0000:00:1a.0-1.4, RNDIS device
[11132.702729] usb 1-1.4: new high-speed USB device number 19 using ehci-pci
[11132.796228] usb 1-1.4: New USB device found, idVendor=0fce, idProduct=014f
[11132.796236] usb 1-1.4: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[11132.796241] usb 1-1.4: Product: LT15i
[11132.796245] usb 1-1.4: Manufacturer: Sony
[11132.796248] usb 1-1.4: SerialNumber: CB5A1FXTTB
[11135.890295] usb 1-1.4: USB disconnect, device number 19
[11136.091225] usb 1-1.4: new high-speed USB device number 20 using ehci-pci
[11136.184668] usb 1-1.4: New USB device found, idVendor=0fce, idProduct=714f
[11136.184676] usb 1-1.4: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[11136.184680] usb 1-1.4: Product: LT15i
[11136.184684] usb 1-1.4: Manufacturer: Sony
[11136.184687] usb 1-1.4: SerialNumber: CB5A1FXTTB
[11136.187132] rndis_host 1-1.4:1.0 usb0: register 'rndis_host' at usb-0000:00:1a.0-1.4, RNDIS device, 46:86:62:cd:5e:be
[11960.445741] usb 2-1.2: new high-speed USB device number 15 using ehci-pci
[11960.540607] usb 2-1.2: New USB device found, idVendor=19d2, idProduct=2000
[11960.540615] usb 2-1.2: New USB device strings: Mfr=3, Product=2, SerialNumber=4
[11960.540620] usb 2-1.2: Product: ZTE WCDMA Technologies MSM
[11960.540624] usb 2-1.2: Manufacturer: ZTE,Incorporated
[11960.540627] usb 2-1.2: SerialNumber: MF6670AVED010000
[11960.543054] usb-storage 2-1.2:1.0: USB Mass Storage device detected
[11960.543170] scsi21 : usb-storage 2-1.2:1.0
[11961.543133] scsi 21:0:0:0: CD-ROM            ZTE      USB SCSI CD-ROM  2.31 PQ: 0 ANSI: 2
[11961.543709] scsi 21:0:0:1: Direct-Access     ZTE      MMC Storage      2.31 PQ: 0 ANSI: 2
[11961.545584] sr1: scsi-1 drive
[11961.546325] sr 21:0:0:0: Attached scsi CD-ROM sr1
[11961.546483] sr 21:0:0:0: Attached scsi generic sg2 type 5
[11961.546838] sd 21:0:0:1: Attached scsi generic sg3 type 0
[11961.555608] sd 21:0:0:1: [sdb] Attached SCSI removable disk
[11961.618511] sr 21:0:0:0: ioctl_internal_command return code = 8070000
[11961.618518]    : Sense Key : Hardware Error [current]
[11961.618524]    : Add. Sense: No additional sense information
[11961.638455] quiet_error: 44 callbacks suppressed
[11961.638462] Buffer I/O error on device sr1, logical block 4
[11961.638470] Buffer I/O error on device sr1, logical block 5
[11961.638476] Buffer I/O error on device sr1, logical block 4
[11961.638484] Buffer I/O error on device sr1, logical block 5
[11961.638499] Buffer I/O error on device sr1, logical block 32
[11961.638503] Buffer I/O error on device sr1, logical block 33
[11961.638507] Buffer I/O error on device sr1, logical block 32
[11961.638511] Buffer I/O error on device sr1, logical block 33
[11961.638518] Buffer I/O error on device sr1, logical block 32
[11961.638521] Buffer I/O error on device sr1, logical block 33
[11961.643218] systemd-udevd[11570]: Failed to apply ACL on /dev/sr1: No such file or directory
[11961.643234] systemd-udevd[11570]: Failed to apply ACL on /dev/sr1: No such file or directory
[11961.653602] systemd-udevd[11570]: Failed to apply ACL on /dev/sr1: No such file or directory
[11961.653619] systemd-udevd[11570]: Failed to apply ACL on /dev/sr1: No such file or directory
[11963.318672] usb 2-1.2: USB disconnect, device number 15
[11966.590352] usb 2-1.2: new high-speed USB device number 16 using ehci-pci
[11966.685420] usb 2-1.2: New USB device found, idVendor=19d2, idProduct=0031
[11966.685428] usb 2-1.2: New USB device strings: Mfr=3, Product=2, SerialNumber=4
[11966.685433] usb 2-1.2: Product: ZTE WCDMA Technologies MSM
[11966.685437] usb 2-1.2: Manufacturer: ZTE,Incorporated
[11966.685440] usb 2-1.2: SerialNumber: MF6670AVED010000
[11966.689162] option 2-1.2:1.0: GSM modem (1-port) converter detected
[11966.689302] usb 2-1.2: GSM modem (1-port) converter now attached to ttyUSB0
[11966.689455] option 2-1.2:1.1: GSM modem (1-port) converter detected
[11966.689646] usb 2-1.2: GSM modem (1-port) converter now attached to ttyUSB1
[11966.689755] usb-storage 2-1.2:1.2: USB Mass Storage device detected
[11966.689955] scsi22 : usb-storage 2-1.2:1.2
[11966.690211] option 2-1.2:1.3: GSM modem (1-port) converter detected
[11966.690372] usb 2-1.2: GSM modem (1-port) converter now attached to ttyUSB2
[11966.692189] qmi_wwan 2-1.2:1.4: cdc-wdm1: USB WDM device
[11966.692448] qmi_wwan 2-1.2:1.4 wwan0: register 'qmi_wwan' at usb-0000:00:1d.0-1.2, WWAN/QMI device, 5a:b9:fa:33:4b:99
[11967.691505] scsi 22:0:0:0: CD-ROM            ZTE      USB SCSI CD-ROM  2.31 PQ: 0 ANSI: 2
[11967.692846] scsi 22:0:0:1: Direct-Access     ZTE      MMC Storage      2.31 PQ: 0 ANSI: 2
[11967.697347] sr1: scsi-1 drive
[11967.697495] sr 22:0:0:0: Attached scsi CD-ROM sr1
[11967.697593] sr 22:0:0:0: Attached scsi generic sg2 type 5
[11967.697788] sd 22:0:0:1: Attached scsi generic sg3 type 0
[11967.707188] sd 22:0:0:1: [sdb] Attached SCSI removable disk
[11967.775029] sr 22:0:0:0: ioctl_internal_command return code = 8070000
[11967.775034]    : Sense Key : Hardware Error [current]
[11967.775037]    : Add. Sense: No additional sense information
[11967.975152] sr 22:0:0:0: ioctl_internal_command return code = 8070000
[11967.975157]    : Sense Key : Hardware Error [current]
[11967.975160]    : Add. Sense: No additional sense information
[13572.504802] systemd-hostnamed[11903]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[14625.240645] systemd-hostnamed[12197]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[17178.970714] systemd-hostnamed[12683]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[18183.523543] PM: Syncing filesystems ... done.
[18183.658159] PM: Preparing system for mem sleep
[18184.057102] Freezing user space processes ... (elapsed 0.001 seconds) done.
[18184.059001] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[18184.060279] PM: Entering mem sleep
[18184.060348] Suspending console(s) (use no_console_suspend to debug)
[18184.060904] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[18184.060961] sd 0:0:0:0: [sda] Stopping disk
[18184.065148] option1 ttyUSB2: option_instat_callback: error -2
[18184.110394] mei_me 0000:00:16.0: suspend
[18184.233281] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D3cold
[18184.852135] PM: suspend of devices complete after 791.942 msecs
[18184.852389] PM: late suspend of devices complete after 0.250 msecs
[18184.852602] r8169 0000:45:00.0: System wakeup enabled by ACPI
[18184.868041] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[18184.884100] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[18184.915927] PM: noirq suspend of devices complete after 63.561 msecs
[18184.916183] ACPI: Preparing to enter system sleep state S3
[18184.926483] PM: Saving platform NVS memory
[18184.927324] Disabling non-boot CPUs ...
[18184.928880] smpboot: CPU 1 is now offline
[18185.031825] smpboot: CPU 2 is now offline
[18185.032377] Broke affinity for irq 16
[18185.032412] Broke affinity for irq 45
[18185.135805] smpboot: CPU 3 is now offline
[18185.136900] ACPI: Low-level resume complete
[18185.136944] PM: Restoring platform NVS memory
[18185.137590] Enabling non-boot CPUs ...
[18185.137638] smpboot: Booting Node 0 Processor 1 APIC 0x1
[18185.151187] CPU1 is up
[18185.151207] smpboot: Booting Node 0 Processor 2 APIC 0x4
[18185.164679] CPU2 is up
[18185.164699] smpboot: Booting Node 0 Processor 3 APIC 0x5
[18185.178201] CPU3 is up
[18185.180603] ACPI: Waking up from system sleep state S3
[18185.257097] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[18185.261431] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
[18185.293074] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[18185.373225] PM: noirq resume of devices complete after 147.828 msecs
[18185.373393] PM: early resume of devices complete after 0.135 msecs
[18185.373448] mei_me 0000:00:16.0: irq 47 for MSI/MSI-X
[18185.373585] pci 0000:00:1e.0: setting latency timer to 64
[18185.373600] ahci 0000:00:1f.2: setting latency timer to 64
[18185.373635] ehci-pci 0000:00:1a.0: setting latency timer to 64
[18185.378524] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[18185.378783] snd_hda_intel 0000:01:00.1: irq 49 for MSI/MSI-X
[18185.378793] ehci-pci 0000:00:1d.0: setting latency timer to 64
[18185.378815] [drm] PCIE GART of 512M enabled (table at 0x000000000025D000).
[18185.378863] mei_me 0000:00:16.0: we can't read the message slots =00000005.
[18185.379157] radeon 0000:01:00.0: WB enabled
[18185.379160] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88012f242c00
[18185.379162] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88012f242c0c
[18185.379923] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc90010f9c418
[18185.396312] [drm] ring test on 0 succeeded in 1 usecs
[18185.396371] [drm] ring test on 3 succeeded in 1 usecs
[18185.476987] pciehp 0000:00:1c.5:pcie04: Device 0000:45:00.0 already exists at 0000:45:00, cannot hot-add
[18185.476989] pciehp 0000:00:1c.5:pcie04: Cannot add device at 0000:45:00
[18185.477010] r8169 0000:45:00.0: System wakeup disabled by ACPI
[18185.581978] [drm] ring test on 5 succeeded in 1 usecs
[18185.581980] [drm] UVD initialized successfully.
[18185.582018] [drm] ib test on ring 0 succeeded in 0 usecs
[18185.582051] [drm] ib test on ring 3 succeeded in 1 usecs
[18185.589024] usb 1-1.5: reset high-speed USB device number 3 using ehci-pci
[18185.704897] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[18185.707410] ata2.00: unexpected _GTF length (8)
[18185.710208] ata2.00: unexpected _GTF length (8)
[18185.710212] ata2.00: configured for UDMA/100
[18185.712854] ata5: SATA link down (SStatus 0 SControl 300)
[18185.732448] [drm] ib test on ring 5 succeeded
[18188.215922] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[18188.216794] ata1.00: unexpected _GTF length (8)
[18188.226198] ata1.00: unexpected _GTF length (8)
[18188.226500] ata1.00: configured for UDMA/100
[18188.239986] sd 0:0:0:0: [sda] Starting disk
[18188.303981] PM: resume of devices complete after 2931.783 msecs
[18188.304671] PM: Finishing wakeup.
[18188.304673] Restarting tasks ... done.
[18188.310446] video LNXVIDEO:00: Restoring backlight state
[18188.387892] usb 2-1.4: new high-speed USB device number 17 using ehci-pci
[18188.431513] option1 ttyUSB2: option_instat_callback: error -71
[18188.492531] usb 2-1.4: New USB device found, idVendor=0bda, idProduct=0138
[18188.492537] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[18188.492540] usb 2-1.4: Product: USB2.0-CRW
[18188.492542] usb 2-1.4: Manufacturer: Generic
[18188.492544] usb 2-1.4: SerialNumber: 20090516388200000
[18188.498243] ums-realtek 2-1.4:1.0: USB Mass Storage device detected
[18188.516936] scsi23 : usb-storage 2-1.4:1.0
[18188.517528] usb 2-1.2: USB disconnect, device number 16
[18188.517730] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[18188.517747] option 2-1.2:1.0: device disconnected
[18188.518018] option1 ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[18188.518023] option1 ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[18188.518026] option1 ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[18188.518028] option1 ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[18188.518743] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[18188.518769] option 2-1.2:1.1: device disconnected
[18188.519022] option1 ttyUSB2: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[18188.523275] option1 ttyUSB2: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[18188.525302] option1 ttyUSB2: option_instat_callback: error -108
[18188.525771] option1 ttyUSB2: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[18188.525776] option1 ttyUSB2: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[18188.526136] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[18188.526149] option 2-1.2:1.3: device disconnected
[18188.526231] qmi_wwan 2-1.2:1.4 wwan0: unregister 'qmi_wwan' usb-0000:00:1d.0-1.2, WWAN/QMI device
[18188.700047] usb 2-1.4: USB disconnect, device number 17
[18188.756942] r8169 0000:45:00.0 eth0: link down
[18188.756993] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[18371.196426] usb 2-1.2: new high-speed USB device number 18 using ehci-pci
[18371.291321] usb 2-1.2: New USB device found, idVendor=19d2, idProduct=2000
[18371.291328] usb 2-1.2: New USB device strings: Mfr=3, Product=2, SerialNumber=4
[18371.291332] usb 2-1.2: Product: ZTE WCDMA Technologies MSM
[18371.291336] usb 2-1.2: Manufacturer: ZTE,Incorporated
[18371.291340] usb 2-1.2: SerialNumber: MF6670AVED010000
[18371.294037] usb-storage 2-1.2:1.0: USB Mass Storage device detected
[18371.294177] scsi24 : usb-storage 2-1.2:1.0
[18372.294142] scsi 24:0:0:0: CD-ROM            ZTE      USB SCSI CD-ROM  2.31 PQ: 0 ANSI: 2
[18372.294890] scsi 24:0:0:1: Direct-Access     ZTE      MMC Storage      2.31 PQ: 0 ANSI: 2
[18372.297385] sr1: scsi-1 drive
[18372.297636] sr 24:0:0:0: Attached scsi CD-ROM sr1
[18372.297805] sr 24:0:0:0: Attached scsi generic sg2 type 5
[18372.298143] sd 24:0:0:1: Attached scsi generic sg3 type 0
[18372.303111] sd 24:0:0:1: [sdb] Attached SCSI removable disk
[18372.373331] sr 24:0:0:0: ioctl_internal_command return code = 8070000
[18372.373338]    : Sense Key : Hardware Error [current]
[18372.373344]    : Add. Sense: No additional sense information
[18372.393520] quiet_error: 44 callbacks suppressed
[18372.393526] Buffer I/O error on device sr1, logical block 4
[18372.393533] Buffer I/O error on device sr1, logical block 5
[18372.393540] Buffer I/O error on device sr1, logical block 4
[18372.393544] Buffer I/O error on device sr1, logical block 5
[18372.393563] Buffer I/O error on device sr1, logical block 32
[18372.393568] Buffer I/O error on device sr1, logical block 33
[18372.393573] Buffer I/O error on device sr1, logical block 32
[18372.393578] Buffer I/O error on device sr1, logical block 33
[18372.393586] Buffer I/O error on device sr1, logical block 32
[18372.393591] Buffer I/O error on device sr1, logical block 33
[18372.399309] systemd-udevd[15046]: Failed to apply ACL on /dev/sr1: No such file or directory
[18372.399327] systemd-udevd[15046]: Failed to apply ACL on /dev/sr1: No such file or directory
[18372.413632] systemd-udevd[15032]: Failed to apply ACL on /dev/sr1: No such file or directory
[18372.413649] systemd-udevd[15032]: Failed to apply ACL on /dev/sr1: No such file or directory
[18374.072086] usb 2-1.2: USB disconnect, device number 18
[18377.341067] usb 2-1.2: new high-speed USB device number 19 using ehci-pci
[18377.436299] usb 2-1.2: New USB device found, idVendor=19d2, idProduct=0031
[18377.436307] usb 2-1.2: New USB device strings: Mfr=3, Product=2, SerialNumber=4
[18377.436311] usb 2-1.2: Product: ZTE WCDMA Technologies MSM
[18377.436315] usb 2-1.2: Manufacturer: ZTE,Incorporated
[18377.436319] usb 2-1.2: SerialNumber: MF6670AVED010000
[18377.439923] option 2-1.2:1.0: GSM modem (1-port) converter detected
[18377.440061] usb 2-1.2: GSM modem (1-port) converter now attached to ttyUSB0
[18377.440212] option 2-1.2:1.1: GSM modem (1-port) converter detected
[18377.440332] usb 2-1.2: GSM modem (1-port) converter now attached to ttyUSB1
[18377.440444] usb-storage 2-1.2:1.2: USB Mass Storage device detected
[18377.440568] scsi25 : usb-storage 2-1.2:1.2
[18377.440824] option 2-1.2:1.3: GSM modem (1-port) converter detected
[18377.441018] usb 2-1.2: GSM modem (1-port) converter now attached to ttyUSB2
[18377.442559] qmi_wwan 2-1.2:1.4: cdc-wdm1: USB WDM device
[18377.442794] qmi_wwan 2-1.2:1.4 wwan0: register 'qmi_wwan' at usb-0000:00:1d.0-1.2, WWAN/QMI device, 5a:b9:fa:33:4b:99
[18378.438336] scsi 25:0:0:0: CD-ROM            ZTE      USB SCSI CD-ROM  2.31 PQ: 0 ANSI: 2
[18378.438925] scsi 25:0:0:1: Direct-Access     ZTE      MMC Storage      2.31 PQ: 0 ANSI: 2
[18378.441065] sr1: scsi-1 drive
[18378.441528] sr 25:0:0:0: Attached scsi CD-ROM sr1
[18378.441623] sr 25:0:0:0: Attached scsi generic sg2 type 5
[18378.441783] sd 25:0:0:1: Attached scsi generic sg3 type 0
[18378.445183] sd 25:0:0:1: [sdb] Attached SCSI removable disk
[18378.513957] sr 25:0:0:0: ioctl_internal_command return code = 8070000
[18378.513963]    : Sense Key : Hardware Error [current]
[18378.513966]    : Add. Sense: No additional sense information
[18378.705957] sr 25:0:0:0: ioctl_internal_command return code = 8070000
[18378.705962]    : Sense Key : Hardware Error [current]
[18378.705964]    : Add. Sense: No additional sense information
[18602.114481] sd 25:0:0:1: ioctl_internal_command return code = 8070000
[18602.114488]    : Sense Key : Hardware Error [current]
[18602.114494]    : Add. Sense: No additional sense information
[18602.398353] sd 25:0:0:1: ioctl_internal_command return code = 8070000
[18602.398359]    : Sense Key : Hardware Error [current]
[18602.398365]    : Add. Sense: No additional sense information
[18602.442436] sd 25:0:0:1: ioctl_internal_command return code = 8070000
[18602.442441]    : Sense Key : Hardware Error [current]
[18602.442446]    : Add. Sense: No additional sense information
[18629.100712] sd 25:0:0:1: ioctl_internal_command return code = 8070000
[18629.100719]    : Sense Key : Hardware Error [current]
[18629.100725]    : Add. Sense: No additional sense information
[18629.292774] sd 25:0:0:1: ioctl_internal_command return code = 8070000
[18629.292781]    : Sense Key : Hardware Error [current]
[18629.292787]    : Add. Sense: No additional sense information
[18629.336957] sd 25:0:0:1: ioctl_internal_command return code = 8070000
[18629.336963]    : Sense Key : Hardware Error [current]
[18629.336969]    : Add. Sense: No additional sense information
[18629.428666] ERROR @wl_dev_intvar_get : error (-1)
[18629.428675] ERROR @wl_cfg80211_get_tx_power : error (-1)
[18891.900454] sd 25:0:0:1: ioctl_internal_command return code = 8070000
[18891.900461]    : Sense Key : Hardware Error [current]
[18891.900467]    : Add. Sense: No additional sense information
[18892.164472] sd 25:0:0:1: ioctl_internal_command return code = 8070000
[18892.164479]    : Sense Key : Hardware Error [current]
[18892.164485]    : Add. Sense: No additional sense information
[18892.208601] sd 25:0:0:1: ioctl_internal_command return code = 8070000
[18892.208606]    : Sense Key : Hardware Error [current]
[18892.208611]    : Add. Sense: No additional sense information
[18892.300357] ERROR @wl_dev_intvar_get : error (-1)
[18892.300368] ERROR @wl_cfg80211_get_tx_power : error (-1)
[19041.430425] sd 25:0:0:1: ioctl_internal_command return code = 8070000
[19041.430432]    : Sense Key : Hardware Error [current]
[19041.430437]    : Add. Sense: No additional sense information
[19041.702363] sd 25:0:0:1: ioctl_internal_command return code = 8070000
[19041.702370]    : Sense Key : Hardware Error [current]
[19041.702376]    : Add. Sense: No additional sense information
[19041.746490] sd 25:0:0:1: ioctl_internal_command return code = 8070000
[19041.746496]    : Sense Key : Hardware Error [current]
[19041.746501]    : Add. Sense: No additional sense information
[19041.841768] ERROR @wl_dev_intvar_get : error (-1)
[19041.841776] ERROR @wl_cfg80211_get_tx_power : error (-1)
[19117.505567] sd 25:0:0:1: ioctl_internal_command return code = 8070000
[19117.505574]    : Sense Key : Hardware Error [current]
[19117.505580]    : Add. Sense: No additional sense information
[19117.709335] sd 25:0:0:1: ioctl_internal_command return code = 8070000
[19117.709342]    : Sense Key : Hardware Error [current]
[19117.709348]    : Add. Sense: No additional sense information
[19117.753356] sd 25:0:0:1: ioctl_internal_command return code = 8070000
[19117.753360]    : Sense Key : Hardware Error [current]
[19117.753366]    : Add. Sense: No additional sense information
[19156.617131] sd 25:0:0:1: ioctl_internal_command return code = 8070000
[19156.617139]    : Sense Key : Hardware Error [current]
[19156.617145]    : Add. Sense: No additional sense information
[19157.104942] sd 25:0:0:1: ioctl_internal_command return code = 8070000
[19157.104949]    : Sense Key : Hardware Error [current]
[19157.104954]    : Add. Sense: No additional sense information
[19157.148957] sd 25:0:0:1: ioctl_internal_command return code = 8070000
[19157.148962]    : Sense Key : Hardware Error [current]
[19157.148967]    : Add. Sense: No additional sense information
[19157.244512] ERROR @wl_dev_intvar_get : error (-1)
[19157.244520] ERROR @wl_cfg80211_get_tx_power : error (-1)
[19538.289066] systemd-hostnamed[15989]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[19542.475873] ISO 9660 Extensions: Microsoft Joliet Level 1
[19542.488097] ISOFS: changing to secondary root
[20183.938057] sd 25:0:0:1: ioctl_internal_command return code = 8070000
[20183.938064]    : Sense Key : Hardware Error [current]
[20183.938070]    : Add. Sense: No additional sense information
[20184.229964] sd 25:0:0:1: ioctl_internal_command return code = 8070000
[20184.229971]    : Sense Key : Hardware Error [current]
[20184.229976]    : Add. Sense: No additional sense information
[20184.273939] sd 25:0:0:1: ioctl_internal_command return code = 8070000
[20184.273944]    : Sense Key : Hardware Error [current]
[20184.273950]    : Add. Sense: No additional sense information
[20229.637947] sd 25:0:0:1: ioctl_internal_command return code = 8070000
[20229.637954]    : Sense Key : Hardware Error [current]
[20229.637960]    : Add. Sense: No additional sense information
[20229.778100] sd 25:0:0:1: ioctl_internal_command return code = 8070000
[20229.778107]    : Sense Key : Hardware Error [current]
[20229.778112]    : Add. Sense: No additional sense information
[20229.822072] sd 25:0:0:1: ioctl_internal_command return code = 8070000
[20229.822077]    : Sense Key : Hardware Error [current]
[20229.822082]    : Add. Sense: No additional sense information
[20229.918316] ERROR @wl_dev_intvar_get : error (-1)
[20229.918324] ERROR @wl_cfg80211_get_tx_power : error (-1)
yali@yali-hp:~$ dmesg | tail
[20229.637954]    : Sense Key : Hardware Error [current]
[20229.637960]    : Add. Sense: No additional sense information
[20229.778100] sd 25:0:0:1: ioctl_internal_command return code = 8070000
[20229.778107]    : Sense Key : Hardware Error [current]
[20229.778112]    : Add. Sense: No additional sense information
[20229.822072] sd 25:0:0:1: ioctl_internal_command return code = 8070000
[20229.822077]    : Sense Key : Hardware Error [current]
[20229.822082]    : Add. Sense: No additional sense information
[20229.918316] ERROR @wl_dev_intvar_get : error (-1)
[20229.918324] ERROR @wl_cfg80211_get_tx_power : error (-1)
yali@yali-hp:~$


if

@yali, öncelikle bu aygıttaki pin'i açın. Pin'i açtıktan sonra bağlanmayı deneyin. Bağlanamazsanız önce sudo eject /dev/sr1 komutunu verip deneyin, olmazsa verdiğim ilk bağlantıdaki çözeüm önerisini deneyin. Dahili kablosuz aygıtın da donanımsal olarak kapalı olduğu görülüyor. Siz özellikle mi kapattınız?

yali

aygıttaki pinin kapalı olduğunu nasıl anladınız ve nasıl açıyoruz? kablosuz aygıtı kullanmadığım için kendim kapattım.

if

@yali, pinin açık kapalı olduğunu gösteren bir çıktı istemedim. Kapalıysa açın çünkü kapalı olunca uygulama kullanılamıyor. Nasıl açılacağını bilmiyorum.

yali

@if öncelikle teşekkür ederim iginiz için..modem manager gui adlı bir program kurdum az da olsa giden gelen paketlerin olduğunu gördüm sonra araştırdım kotam dolmuş ve avea bağlantı hızımı minuma çekmiş..