Ubuntu 12.10 kurulumu ve kablosuz modem bulamama

Başlatan nexusmodera, 19 Aralık 2012 - 21:16:00

« önceki - sonraki »

0 Üyeler ve 1 Ziyaretçi konuyu incelemekte.

Yazdır
Aşağı git Sayfa1
Kullanıcı Eylemleri

nexusmodera

19 Aralık 2012 - 21:16:00 Son düzenlenme: 22 Aralık 2012 - 14:43:24 if
merhaba Ubuntu 12.10 kurulumunu başarıyla yaptım;
ancak wireless modemimi bulamıyor
kablolu olarakta bulamadi.
yardımınız için teşekkürler.

burk

#1
19 Aralık 2012 - 21:31:27
Öncelikle forumda lütfen arama yapın ve lütfen Türkçe karşılığı olan kelimeler kullanmaya çalışın.

ct

#2
22 Aralık 2012 - 12:34:03
@nexusmodera,

Merhaba, CTRL+T ile uçbirimi açıp aşağıdaki komutları girip çıktılarını buraya kopyala yapıştır yöntemiyle gönderebilir misiniz? O bilgisayardan internete giremiyorsanız çıktıları bir dosyaya kaydedin parmak bellekle (USB bellek) internet olan bir bilgisayara kopyalayıp oradan gönderin. Kablosuz ağınızı göremiyor da başka ağları görüyorsa, gizli ağlara bağlan'ı tıklayıp kendi ağınızın adını ve şifresini girerek ağa bağlanmayı deneyebilirsiniz.

Kod Seç
cat /etc/lsb-release
uname -a
lspci
lsusb
rfkill list
sudo lshw -C network
ifconfig
iwconfig
iwlist scanning
lsmod
dmesg
dmesg | tail

nexusmodera

#3
23 Aralık 2012 - 12:13:24
Merhaba;
Ctrl+T komutunu ubuntu açıldığı zaman tam olarak nasil yazacağım,
dediğiniz şekilde Ctrl+T yaptiğimda ekran da hiç bir değişiklik olmuyor,
ben yeni başladığım için bu işletim sistemine o sebeple henüz bilgim son derece az internet bağlantısı da olmadan işletim sistemini keşfetmem çok daha zorlaşıyor,
yardımcı olursanız çok sevinirim...

komutları sırasıyla yazmanız benim için çok makbule geçer,
yardımlaarınız için şimdiden teşekkür ederim.

ct

#4
23 Aralık 2012 - 13:03:40
Pardon yanlış yazmışım. Klavyenizdeki CTRL ALT ve T tuşlarına (CTRL+ALT+T) aynı anda basın uçbirim çıkacaktır. Yukarıda verdiğim komutları ayrı ayrı yazın. Ben de ayırayım. Her satırı (komutu) yazdıktan sonra enter tuşuna basın. Sonuçlarını yazdıracaktır uçbirimde. Oradakileri fareyle seçip sağ tıklayıp kopyalayın. Ardından sonuclar.txt gibi bir dosya oluşturup içine bu komutları farenin sağ tuşuna tıklayıp yapıştırı seçerek yapıştırın. Dosyayı masaüstünde sağ tıklayıp yeni dosya diyerek oluşturabilirsiniz. En son olarak bu dosyayı parmak bellek yardımıyla (USB bellek de deniyor) interneti olan bilgisayarınıza kopyalayın ve buraya gönderin.

Kod Seç
cat /etc/lsb-release

Kod Seç
uname -a

Kod Seç
lspci

Kod Seç
lsusb

Kod Seç
rfkill list

Kod Seç
sudo lshw -C network

Kod Seç
ifconfig

Kod Seç
iwconfig

Kod Seç
iwlist scanning

Kod Seç
lsmod

Kod Seç
dmesg

Kod Seç
dmesg | tail

nexusmodera

#5
23 Aralık 2012 - 15:35:04 Son düzenlenme: 23 Aralık 2012 - 18:14:11 burk
Selam sanırım oldu,

yardımın için şimdiden teşekkürler.

Kod Seç
[    0.351299] TCP: Hash tables configured (established 262144 bind 65536)
[    0.351302] TCP: reno registered
[    0.351316] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.351336] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.351477] NET: Registered protocol family 1
[    0.351802] pci 0000:01:00.0: >Boot video device
[    0.352092] PCI: CLS 64 bytes, default 64
[    0.352137] Simple Boot Flag at 0x36 set to 0x1
[    0.352512] audit: initializing netlink socket (disabled)
[    0.352527] type=2000 audit(1356274656.352:1): initialized
[    0.375705] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.377632] VFS: Disk quotas dquot_6.5.2
[    0.377680] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.378223] fuse init (API version 7.19)
[    0.378306] msgmni has been set to 3960
[    0.378659] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.378691] io scheduler noop registered
[    0.378693] io scheduler deadline registered (default)
[    0.378723] io scheduler cfq registered
[    0.378876] pcieport 0000:00:01.0: >irq 40 for MSI/MSI-X
[    0.378986] pcieport 0000:00:1c.0: >irq 41 for MSI/MSI-X
[    0.379114] pcieport 0000:00:1c.1: >irq 42 for MSI/MSI-X
[    0.379247] pcieport 0000:00:1c.2: >irq 43 for MSI/MSI-X
[    0.379381] pcieport 0000:00:1c.3: >irq 44 for MSI/MSI-X
[    0.379512] pcieport 0000:00:1c.5: >irq 45 for MSI/MSI-X
[    0.379614] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.379635] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.379689] intel_idle: does not run on family 6 model 23
[    0.380711] ACPI: AC Adapter [ACAD] (on-line)
[    0.380795] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    0.380821] ACPI: Lid Switch [LID0]
[    0.380862] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.380866] ACPI: Power Button [PWRB]
[    0.380906] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    0.380909] ACPI: Sleep Button [SLPB]
[    0.380963] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.380966] ACPI: Power Button [PWRF]
[    0.381046] ACPI: Requesting acpi_cpufreq
[    0.392441] Freeing initrd memory: 14852k freed
[    0.401543] Monitor-Mwait will be used to enter C-1 state
[    0.405565] Monitor-Mwait will be used to enter C-2 state
[    0.405613] Marking TSC unstable due to TSC halts in idle
[    0.405623] ACPI: acpi_idle registered with cpuidle
[    0.448536] ACPI: Invalid active0 threshold
[    0.449520] thermal LNXTHERM:00: >registered as thermal_zone0
[    0.449523] ACPI: Thermal Zone [TZ00] (62 C)
[    0.449579] ACPI: Battery Slot [BAT1] (battery present)
[    0.449608] GHES: HEST is not enabled!
[    0.449707] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.451201] Linux agpgart interface v0.103
[    0.452925] brd: module loaded
[    0.453719] loop: module loaded
[    0.453844] ahci 0000:00:1f.2: >version 3.0
[    0.453912] ahci 0000:00:1f.2: >irq 46 for MSI/MSI-X
[    0.453966] ahci: SSS flag set, parallel bus scan disabled
[    0.454001] ahci 0000:00:1f.2: >AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x13 impl SATA mode
[    0.454004] ahci 0000:00:1f.2: >flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
[    0.454010] ahci 0000:00:1f.2: >setting latency timer to 64
[    0.468729] scsi0 : ahci
[    0.468966] scsi1 : ahci
[    0.469032] scsi2 : ahci
[    0.469100] scsi3 : ahci
[    0.469170] scsi4 : ahci
[    0.469220] ata1: SATA max UDMA/133 abar m2048@0xf5505000 port 0xf5505100 irq 46
[    0.469223] ata2: SATA max UDMA/133 abar m2048@0xf5505000 port 0xf5505180 irq 46
[    0.469225] ata3: DUMMY
[    0.469226] ata4: DUMMY
[    0.469229] ata5: SATA max UDMA/133 abar m2048@0xf5505000 port 0xf5505300 irq 46
[    0.469549] Fixed MDIO Bus: probed
[    0.469594] tun: Universal TUN/TAP device driver, 1.6
[    0.469596] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.469665] PPP generic driver version 2.4.2
[    0.469718] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.469772] ehci_hcd 0000:00:1a.7: >setting latency timer to 64
[    0.469776] ehci_hcd 0000:00:1a.7: >EHCI Host Controller
[    0.469783] ehci_hcd 0000:00:1a.7: >new USB bus registered, assigned bus number 1
[    0.469817] ehci_hcd 0000:00:1a.7: >debug port 1
[    0.473687] ehci_hcd 0000:00:1a.7: >cache line size of 64 is not supported
[    0.473707] ehci_hcd 0000:00:1a.7: >irq 20, io mem 0xf5505800
[    0.484016] ehci_hcd 0000:00:1a.7: >USB 2.0 started, EHCI 1.00
[    0.484041] usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
[    0.484044] usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.484046] usb usb1: >Product: EHCI Host Controller
[    0.484048] usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
[    0.484051] usb usb1: >SerialNumber: 0000:00:1a.7
[    0.484190] hub 1-0:1.0: >USB hub found
[    0.484195] hub 1-0:1.0: >6 ports detected
[    0.484301] ehci_hcd 0000:00:1d.7: >setting latency timer to 64
[    0.484305] ehci_hcd 0000:00:1d.7: >EHCI Host Controller
[    0.484311] ehci_hcd 0000:00:1d.7: >new USB bus registered, assigned bus number 2
[    0.484339] ehci_hcd 0000:00:1d.7: >debug port 1
[    0.488228] ehci_hcd 0000:00:1d.7: >cache line size of 64 is not supported
[    0.488251] ehci_hcd 0000:00:1d.7: >irq 23, io mem 0xf5505c00
[    0.500016] ehci_hcd 0000:00:1d.7: >USB 2.0 started, EHCI 1.00
[    0.500051] usb usb2: >New USB device found, idVendor=1d6b, idProduct=0002
[    0.500053] usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.500056] usb usb2: >Product: EHCI Host Controller
[    0.500058] usb usb2: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
[    0.500060] usb usb2: >SerialNumber: 0000:00:1d.7
[    0.500177] hub 2-0:1.0: >USB hub found
[    0.500182] hub 2-0:1.0: >6 ports detected
[    0.500259] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.500283] uhci_hcd: USB Universal Host Controller Interface driver
[    0.500308] uhci_hcd 0000:00:1a.0: >setting latency timer to 64
[    0.500312] uhci_hcd 0000:00:1a.0: >UHCI Host Controller
[    0.500318] uhci_hcd 0000:00:1a.0: >new USB bus registered, assigned bus number 3
[    0.500356] uhci_hcd 0000:00:1a.0: >irq 16, io base 0x00001800
[    0.500392] usb usb3: >New USB device found, idVendor=1d6b, idProduct=0001
[    0.500395] usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.500397] usb usb3: >Product: UHCI Host Controller
[    0.500400] usb usb3: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
[    0.500402] usb usb3: >SerialNumber: 0000:00:1a.0
[    0.500510] hub 3-0:1.0: >USB hub found
[    0.500516] hub 3-0:1.0: >2 ports detected
[    0.500585] uhci_hcd 0000:00:1a.1: >setting latency timer to 64
[    0.500589] uhci_hcd 0000:00:1a.1: >UHCI Host Controller
[    0.500594] uhci_hcd 0000:00:1a.1: >new USB bus registered, assigned bus number 4
[    0.500631] uhci_hcd 0000:00:1a.1: >irq 21, io base 0x00001820
[    0.500667] usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001
[    0.500670] usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.500672] usb usb4: >Product: UHCI Host Controller
[    0.500674] usb usb4: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
[    0.500676] usb usb4: >SerialNumber: 0000:00:1a.1
[    0.500768] hub 4-0:1.0: >USB hub found
[    0.500772] hub 4-0:1.0: >2 ports detected
[    0.500844] uhci_hcd 0000:00:1a.2: >setting latency timer to 64
[    0.500847] uhci_hcd 0000:00:1a.2: >UHCI Host Controller
[    0.500853] uhci_hcd 0000:00:1a.2: >new USB bus registered, assigned bus number 5
[    0.500881] uhci_hcd 0000:00:1a.2: >irq 20, io base 0x00001840
[    0.500914] usb usb5: >New USB device found, idVendor=1d6b, idProduct=0001
[    0.500917] usb usb5: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.500919] usb usb5: >Product: UHCI Host Controller
[    0.500921] usb usb5: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
[    0.500923] usb usb5: >SerialNumber: 0000:00:1a.2
[    0.501010] hub 5-0:1.0: >USB hub found
[    0.501014] hub 5-0:1.0: >2 ports detected
[    0.501083] uhci_hcd 0000:00:1d.0: >setting latency timer to 64
[    0.501087] uhci_hcd 0000:00:1d.0: >UHCI Host Controller
[    0.501092] uhci_hcd 0000:00:1d.0: >new USB bus registered, assigned bus number 6
[    0.501121] uhci_hcd 0000:00:1d.0: >irq 23, io base 0x00001860
[    0.501154] usb usb6: >New USB device found, idVendor=1d6b, idProduct=0001
[    0.501157] usb usb6: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.501159] usb usb6: >Product: UHCI Host Controller
[    0.501161] usb usb6: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
[    0.501163] usb usb6: >SerialNumber: 0000:00:1d.0
[    0.501256] hub 6-0:1.0: >USB hub found
[    0.501261] hub 6-0:1.0: >2 ports detected
[    0.501338] uhci_hcd 0000:00:1d.1: >setting latency timer to 64
[    0.501342] uhci_hcd 0000:00:1d.1: >UHCI Host Controller
[    0.501349] uhci_hcd 0000:00:1d.1: >new USB bus registered, assigned bus number 7
[    0.501387] uhci_hcd 0000:00:1d.1: >irq 19, io base 0x00001880
[    0.501422] usb usb7: >New USB device found, idVendor=1d6b, idProduct=0001
[    0.501425] usb usb7: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.501427] usb usb7: >Product: UHCI Host Controller
[    0.501429] usb usb7: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
[    0.501431] usb usb7: >SerialNumber: 0000:00:1d.1
[    0.501520] hub 7-0:1.0: >USB hub found
[    0.501524] hub 7-0:1.0: >2 ports detected
[    0.501592] uhci_hcd 0000:00:1d.2: >setting latency timer to 64
[    0.501596] uhci_hcd 0000:00:1d.2: >UHCI Host Controller
[    0.501602] uhci_hcd 0000:00:1d.2: >new USB bus registered, assigned bus number 8
[    0.501640] uhci_hcd 0000:00:1d.2: >irq 18, io base 0x000018a0
[    0.501676] usb usb8: >New USB device found, idVendor=1d6b, idProduct=0001
[    0.501679] usb usb8: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.501681] usb usb8: >Product: UHCI Host Controller
[    0.501683] usb usb8: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
[    0.501685] usb usb8: >SerialNumber: 0000:00:1d.2
[    0.501775] hub 8-0:1.0: >USB hub found
[    0.501779] hub 8-0:1.0: >2 ports detected
[    0.501910] usbcore: registered new interface driver libusual
[    0.501948] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.568354] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.568361] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.568494] mousedev: PS/2 mouse device common for all mice
[    0.573586] rtc_cmos 00:06: >RTC can wake from S4
[    0.573740] rtc_cmos 00:06: >rtc core: registered rtc_cmos as rtc0
[    0.573816] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.573926] device-mapper: uevent: version 1.0.3
[    0.573996] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    0.574069] cpuidle: using governor ladder
[    0.574165] cpuidle: using governor menu
[    0.574167] EFI Variables Facility v0.08 2004-May-17
[    0.574512] ashmem: initialized
[    0.574706] TCP: cubic registered
[    0.574878] NET: Registered protocol family 10
[    0.575118] NET: Registered protocol family 17
[    0.575129] Key type dns_resolver registered
[    0.575304] PM: Hibernation image not present or could not be loaded.
[    0.575318] registered taskstats version 1
[    0.577982] Key type trusted registered
[    0.580763] Key type encrypted registered
[    0.583797] ACPI: Battery Slot [BAT1] (battery present)
[    0.583846]   Magic number: 8:692:991
[    0.583987] rtc_cmos 00:06: >setting system clock to 2012-12-23 14:57:37 UTC (1356274657)
[    0.588580] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.588582] EDD information not available.
[    0.636840] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    0.788068] ata1: SATA *bağlantı up 1.5 Gbps (SStatus 113 SControl 300)
[    0.789094] ata1.00: ATA-8: HITACHI HTS545025B9A300, PB2ZC61H, max UDMA/100
[    0.789098] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.790288] ata1.00: configured for UDMA/100
[    0.790438] scsi 0:0:0:0: >Direct-Access     ATA      HITACHI HTS54502 PB2Z PQ: 0 ANSI: 5
[    0.790564] sd 0:0:0:0: >[sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    0.790582] sd 0:0:0:0: >Attached scsi generic sg0 type 0
[    0.790613] sd 0:0:0:0: >[sda] Write Protect is off
[    0.790616] sd 0:0:0:0: >[sda] Mode Sense: 00 3a 00 00
[    0.790645] sd 0:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.839668]  sda: sda1 sda2 sda3 < sda5 > sda4
[    0.840244] sd 0:0:0:0: >[sda] Attached SCSI disk
[    0.964077] usb 2-3: >new high-speed USB device number 3 using ehci_hcd
[    1.108053] ata2: SATA *bağlantı up 1.5 Gbps (SStatus 113 SControl 300)
[    1.110448] ata2.00: ATAPI: SlimtypeDVD A DS8A4S, JL61, max UDMA/100
[    1.111715] ata2.00: configured for UDMA/100
[    1.117145] scsi 1:0:0:0: >CD-ROM            Slimtype DVD A DS8A4S     JL61 PQ: 0 ANSI: 5
[    1.122813] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda pop-up
[    1.122816] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.122942] sr 1:0:0:0: >Attached scsi CD-ROM sr0
[    1.123026] sr 1:0:0:0: >Attached scsi generic sg1 type 5
[    1.208940] usb 2-3: >New USB device found, idVendor=5986, idProduct=0145
[    1.208943] usb 2-3: >New USB device strings: Mfr=3, Product=1, SerialNumber=0
[    1.208946] usb 2-3: >Product: Lenovo EasyCamera
[    1.208948] usb 2-3: >Manufacturer: Bison Electronics Inc.
[    1.440064] ata5: SATA *bağlantı down (SStatus 0 SControl 300)
[    1.441477] Freeing unused kernel memory: 928k freed
[    1.441759] Write protecting the kernel read-only data: 12288k
[    1.446653] Freeing unused kernel memory: 1472k freed
[    1.450893] Freeing unused kernel memory: 1124k freed
[    1.464046] usb 3-1: >new full-speed USB device number 2 using uhci_hcd
[    1.471505] udevd[100]: starting version 175
[    1.576993] tg3.c:v3.123 (March 21, 2012)
[    1.584299] ssb: Found chip with id 0x4312, rev 0x01 and package 0x00
[    1.584319] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x16, vendor 0x4243)
[    1.584336] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0F, vendor 0x4243)
[    1.584353] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x0A, vendor 0x4243)
[    1.584370] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x09, vendor 0x4243)
[    1.630743] tg3 0000:07:00.0: >eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address 00:26:22:cf:3b:5f
[    1.630749] tg3 0000:07:00.0: >eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0], EEE[0])
[    1.630752] tg3 0000:07:00.0: >eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[0]
[    1.630755] tg3 0000:07:00.0: >eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    1.637420] usb 3-1: >New USB device found, idVendor=0a5c, idProduct=2150
[    1.637425] usb 3-1: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.637428] usb 3-1: >Product: BCM2046 Bluetooth Device
[    1.637430] usb 3-1: >Manufacturer: Broadcom Corp
[    1.637432] usb 3-1: >SerialNumber: 0C6076A8723B
[    1.656304] ssb: Sonics Silicon Backplane found on PCI device 0000:04:00.0
[    1.880078] usb 6-1: >new low-speed USB device number 2 using uhci_hcd
[    2.079185] usb 6-1: >New USB device found, idVendor=04d9, idProduct=0499
[    2.079189] usb 6-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.128252] usbcore: registered new interface driver usbhid
[    2.128256] usbhid: USB HID core driver
[    2.130659] input: HID 04d9:0499 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input5
[    2.130780] hid-generic 0003:04D9:0499.0001: >input,hidraw0: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:1d.0-1/input0
[    2.643586] kjournald starting.  Commit interval 5 seconds
[    2.643695] EXT3-fs (loop0): mounted filesystem with ordered data mode
[   25.212037] Adding 262140k swap on /host/ubuntu/disks/swap.disk.  Priority:-1 extents:1 across:262140k
[   25.219127] IPv6: ADDRCONF(NETDEV_UP): eth0: *bağlantı is not ready
[   25.231713] udevd[378]: starting version 175
[   25.243098] EXT3-fs (loop0): using internal journal
[   25.332407] wmi: Mapper loaded
[   25.338018] acpi device:03: >registered as cooling_device2
[   25.338086] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   25.338230] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input6
[   25.342095] [drm] Initialized drm 1.1.0 20060810
[   25.384141] ACPI Warning: 0x0000000000000460-0x000000000000047f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[   25.384151] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   25.384153] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
[   25.384157] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[   25.384161] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   25.384165] ACPI Warning: 0x0000000000001180-0x00000000000011bf SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
[   25.384169] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   25.384171] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   25.385545] nouveau 0000:01:00.0: >power state changed by ACPI to D0
[   25.385558] nouveau 0000:01:00.0: >power state changed by ACPI to D0
[   25.431997] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x0a8a00a2)
[   25.438581] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
[   25.442468] Bluetooth: Core ver 2.16
[   25.442523] NET: Registered protocol family 31
[   25.442525] Bluetooth: HCI device and connection manager initialized
[   25.442527] Bluetooth: HCI socket layer initialized
[   25.442529] Bluetooth: L2CAP socket layer initialized
[   25.442535] Bluetooth: SCO socket layer initialized
[   25.443498] usbcore: registered new interface driver btusb
[   25.453792] cfg80211: Calling CRDA to update world regulatory domain
[   25.526397] input: Ideapad extra buttons as /devices/platform/ideapad/input/input7
[   25.548731] [drm] nouveau 0000:01:00.0: ... appears to be valid
[   25.548736] [drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN
[   25.548740] [drm] nouveau 0000:01:00.0: BIT BIOS found
[   25.548743] [drm] nouveau 0000:01:00.0: Bios version 70.18.2b.00
[   25.548747] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[   25.550847] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
[   25.550852] [drm] nouveau 0000:01:00.0: DCB version 4.0
[   25.550855] [drm] nouveau 0000:01:00.0: DCB outp 00: 01010323 00010034
[   25.550857] [drm] nouveau 0000:01:00.0: DCB outp 01: 02001300 00000000
[   25.550859] [drm] nouveau 0000:01:00.0: DCB outp 02: 02025362 00020010
[   25.550860] [drm] nouveau 0000:01:00.0: DCB conn 00: 00000040
[   25.550863] [drm] nouveau 0000:01:00.0: DCB conn 01: 00000100
[   25.550865] [drm] nouveau 0000:01:00.0: DCB conn 02: 00000310
[   25.550866] [drm] nouveau 0000:01:00.0: DCB conn 03: 00000311
[   25.550868] [drm] nouveau 0000:01:00.0: DCB conn 04: 00000313
[   25.550870] [drm] nouveau 0000:01:00.0: DCB conn 05: 00002461
[   25.550927] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xDDE0
[   25.590871] [drm] nouveau 0000:01:00.0: 0xE136: Condition still not met after 20ms, skipping following opcodes
[   25.610752] [drm] nouveau 0000:01:00.0: 0xE13A: Condition still not met after 20ms, skipping following opcodes
[   25.618587] Linux video capture interface: v2.00
[   25.622157] b43-phy0: Broadcom 4312 WLAN found (core revision 15)
[   25.629487] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0145)
[   25.630653] [drm] nouveau 0000:01:00.0: 0xE304: Condition still not met after 20ms, skipping following opcodes
[   25.630672] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xE331
[   25.633717] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3:1.0/input/input8
[   25.635671] usbcore: registered new interface driver uvcvideo
[   25.635675] USB Video Class driver (1.1.1)
[   25.637060] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xEE03
[   25.637079] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEE38
[   25.680084] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEFEB
[   25.680088] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xF050
[   25.699945] [drm] nouveau 0000:01:00.0: 0xF050: Condition still not met after 20ms, skipping following opcodes
[   25.708529] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
[   25.710936] [TTM] Zone  kernel: Available graphics memory: 1023124 kiB
[   25.710940] [TTM] Initializing pool allocator
[   25.710946] [TTM] Initializing DMA pool allocator
[   25.710959] [drm] nouveau 0000:01:00.0: Detected 512MiB VRAM (DDR2)
[   25.711633] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[   25.854482] snd_hda_intel 0000:00:1b.0: >power state changed by ACPI to D0
[   25.854490] snd_hda_intel 0000:00:1b.0: >power state changed by ACPI to D0
[   25.855627] snd_hda_intel 0000:00:1b.0: >irq 47 for MSI/MSI-X
[   25.914897] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   25.914902] [drm] No driver support for vblank timestamp query.
[   25.914905] [drm] nouveau 0000:01:00.0: ACPI backlight interface available, not registering our own
[   25.920540] Broadcom 43xx driver loaded [ Features: PNL ]
[   25.952387] cfg80211: World regulatory domain updated:
[   25.952392] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   25.952395] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   25.952398] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   25.952399] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   25.952401] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   25.952403] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   25.964563] [drm] nouveau 0000:01:00.0: 3 available performance level(s)
[   25.964570] [drm] nouveau 0000:01:00.0: 0: core 135MHz shader 270MHz memory 135MHz voltage 850mV
[   25.964573] [drm] nouveau 0000:01:00.0: 1: core 405MHz shader 810MHz memory 405MHz voltage 850mV
[   25.964576] [drm] nouveau 0000:01:00.0: 3: core 606MHz shader 1468MHz memory 500MHz voltage 1000mV
[   25.964579] [drm] nouveau 0000:01:00.0: c: core 405MHz shader 810MHz memory 405MHz voltage 800mV
[   25.984495] [drm] nouveau 0000:01:00.0: MM: using COPY for buffer copies
[   26.050974] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   26.050978] Bluetooth: BNEP filters: protocol multicast
[   26.169954] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
[   26.191304] b43-phy0 ERROR: Firmware file "b43/ucode15.fw" not found
[   26.191308] b43-phy0 ERROR: Firmware file "b43-open/ucode15.fw" not found
[   26.191311] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[   26.221247] lp: driver loaded but no devices found
[   26.243208] ppdev: user-space parallel port driver
[   26.277184] Bluetooth: RFCOMM TTY layer initialized
[   26.277192] Bluetooth: RFCOMM socket layer initialized
[   26.277193] Bluetooth: RFCOMM ver 1.11
[   27.053369] type=1400 audit(1356267483.967:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=666 comm="apparmor_parser"
[   27.053927] type=1400 audit(1356267483.967:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=666 comm="apparmor_parser"
[   27.109858] init: failsafe main process (681) killed by TERM signal
[   27.247529] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   27.427097] tg3 0000:07:00.0: >irq 48 for MSI/MSI-X
[   27.446727] [drm] nouveau 0000:01:00.0: allocated 1366x768 fb: 0x2c0000, bo ffff880036dadc00
[   27.446891] fbcon: nouveaufb (fb0) is primary device
[   27.447008] Console: switching to colour frame buffer device 170x48
[   27.447041] fb0: nouveaufb frame buffer device
[   27.447043] drm: registered panic notifier
[   27.447050] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0
[   27.447099] hda_intel: Disabling MSI
[   27.447115] hda-intel: 0000:01:00.1: Handle VGA-switcheroo audio client
[   27.476500] IPv6: ADDRCONF(NETDEV_UP): eth0: *bağlantı is not ready
[   27.477460] IPv6: ADDRCONF(NETDEV_UP): eth0: *bağlantı is not ready
[   27.478079] type=1400 audit(1356267484.391:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=760 comm="apparmor_parser"
[   27.478455] type=1400 audit(1356267484.391:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=760 comm="apparmor_parser"
[   27.488888] type=1400 audit(1356267484.403:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=761 comm="apparmor_parser"
[   27.489273] type=1400 audit(1356267484.403:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=761 comm="apparmor_parser"
[   27.520822] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input9
[   27.581092] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input10
[   27.611740] type=1400 audit(1356267484.523:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=791 comm="apparmor_parser"
[   27.612135] type=1400 audit(1356267484.527:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=791 comm="apparmor_parser"
[   27.645539] type=1400 audit(1356267484.559:10): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=794 comm="apparmor_parser"
[   27.645994] type=1400 audit(1356267484.559:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=794 comm="apparmor_parser"
[   28.440151] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[   28.440324] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[   28.440455] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[   28.440578] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
bora@ubuntu:~$ dmesg | tail
[   27.520822] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input9
[   27.581092] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input10
[   27.611740] type=1400 audit(1356267484.523:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=791 comm="apparmor_parser"
[   27.612135] type=1400 audit(1356267484.527:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=791 comm="apparmor_parser"
[   27.645539] type=1400 audit(1356267484.559:10): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=794 comm="apparmor_parser"
[   27.645994] type=1400 audit(1356267484.559:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=794 comm="apparmor_parser"
[   28.440151] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[   28.440324] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[   28.440455] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[   28.440578] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
bora@ubuntu:~$
[    0.351299] TCP: Hash tables configured (established 262144 bind 65536)
[    0.351302] TCP: reno registered
[    0.351316] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.351336] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.351477] NET: Registered protocol family 1
[    0.351802] pci 0000:01:00.0: >Boot video device
[    0.352092] PCI: CLS 64 bytes, default 64
[    0.352137] Simple Boot Flag at 0x36 set to 0x1
[    0.352512] audit: initializing netlink socket (disabled)
[    0.352527] type=2000 audit(1356274656.352:1): initialized
[    0.375705] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.377632] VFS: Disk quotas dquot_6.5.2
[    0.377680] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.378223] fuse init (API version 7.19)
[    0.378306] msgmni has been set to 3960
[    0.378659] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.378691] io scheduler noop registered
[    0.378693] io scheduler deadline registered (default)
[    0.378723] io scheduler cfq registered
[    0.378876] pcieport 0000:00:01.0: >irq 40 for MSI/MSI-X
[    0.378986] pcieport 0000:00:1c.0: >irq 41 for MSI/MSI-X
[    0.379114] pcieport 0000:00:1c.1: >irq 42 for MSI/MSI-X
[    0.379247] pcieport 0000:00:1c.2: >irq 43 for MSI/MSI-X
[    0.379381] pcieport 0000:00:1c.3: >irq 44 for MSI/MSI-X
[    0.379512] pcieport 0000:00:1c.5: >irq 45 for MSI/MSI-X
[    0.379614] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.379635] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.379689] intel_idle: does not run on family 6 model 23
[    0.380711] ACPI: AC Adapter [ACAD] (on-line)
[    0.380795] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    0.380821] ACPI: Lid Switch [LID0]
[    0.380862] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.380866] ACPI: Power Button [PWRB]
[    0.380906] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    0.380909] ACPI: Sleep Button [SLPB]
[    0.380963] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.380966] ACPI: Power Button [PWRF]
[    0.381046] ACPI: Requesting acpi_cpufreq
[    0.392441] Freeing initrd memory: 14852k freed
[    0.401543] Monitor-Mwait will be used to enter C-1 state
[    0.405565] Monitor-Mwait will be used to enter C-2 state
[    0.405613] Marking TSC unstable due to TSC halts in idle
[    0.405623] ACPI: acpi_idle registered with cpuidle
[    0.448536] ACPI: Invalid active0 threshold
[    0.449520] thermal LNXTHERM:00: >registered as thermal_zone0
[    0.449523] ACPI: Thermal Zone [TZ00] (62 C)
[    0.449579] ACPI: Battery Slot [BAT1] (battery present)
[    0.449608] GHES: HEST is not enabled!
[    0.449707] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.451201] Linux agpgart interface v0.103
[    0.452925] brd: module loaded
[    0.453719] loop: module loaded
[    0.453844] ahci 0000:00:1f.2: >version 3.0
[    0.453912] ahci 0000:00:1f.2: >irq 46 for MSI/MSI-X
[    0.453966] ahci: SSS flag set, parallel bus scan disabled
[    0.454001] ahci 0000:00:1f.2: >AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x13 impl SATA mode
[    0.454004] ahci 0000:00:1f.2: >flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
[    0.454010] ahci 0000:00:1f.2: >setting latency timer to 64
[    0.468729] scsi0 : ahci
[    0.468966] scsi1 : ahci
[    0.469032] scsi2 : ahci
[    0.469100] scsi3 : ahci
[    0.469170] scsi4 : ahci
[    0.469220] ata1: SATA max UDMA/133 abar m2048@0xf5505000 port 0xf5505100 irq 46
[    0.469223] ata2: SATA max UDMA/133 abar m2048@0xf5505000 port 0xf5505180 irq 46
[    0.469225] ata3: DUMMY
[    0.469226] ata4: DUMMY
[    0.469229] ata5: SATA max UDMA/133 abar m2048@0xf5505000 port 0xf5505300 irq 46
[    0.469549] Fixed MDIO Bus: probed
[    0.469594] tun: Universal TUN/TAP device driver, 1.6
[    0.469596] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.469665] PPP generic driver version 2.4.2
[    0.469718] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.469772] ehci_hcd 0000:00:1a.7: >setting latency timer to 64
[    0.469776] ehci_hcd 0000:00:1a.7: >EHCI Host Controller
[    0.469783] ehci_hcd 0000:00:1a.7: >new USB bus registered, assigned bus number 1
[    0.469817] ehci_hcd 0000:00:1a.7: >debug port 1
[    0.473687] ehci_hcd 0000:00:1a.7: >cache line size of 64 is not supported
[    0.473707] ehci_hcd 0000:00:1a.7: >irq 20, io mem 0xf5505800
[    0.484016] ehci_hcd 0000:00:1a.7: >USB 2.0 started, EHCI 1.00
[    0.484041] usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
[    0.484044] usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.484046] usb usb1: >Product: EHCI Host Controller
[    0.484048] usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
[    0.484051] usb usb1: >SerialNumber: 0000:00:1a.7
[    0.484190] hub 1-0:1.0: >USB hub found
[    0.484195] hub 1-0:1.0: >6 ports detected
[    0.484301] ehci_hcd 0000:00:1d.7: >setting latency timer to 64
[    0.484305] ehci_hcd 0000:00:1d.7: >EHCI Host Controller
[    0.484311] ehci_hcd 0000:00:1d.7: >new USB bus registered, assigned bus number 2
[    0.484339] ehci_hcd 0000:00:1d.7: >debug port 1
[    0.488228] ehci_hcd 0000:00:1d.7: >cache line size of 64 is not supported
[    0.488251] ehci_hcd 0000:00:1d.7: >irq 23, io mem 0xf5505c00
[    0.500016] ehci_hcd 0000:00:1d.7: >USB 2.0 started, EHCI 1.00
[    0.500051] usb usb2: >New USB device found, idVendor=1d6b, idProduct=0002
[    0.500053] usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.500056] usb usb2: >Product: EHCI Host Controller
[    0.500058] usb usb2: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
[    0.500060] usb usb2: >SerialNumber: 0000:00:1d.7
[    0.500177] hub 2-0:1.0: >USB hub found
[    0.500182] hub 2-0:1.0: >6 ports detected
[    0.500259] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.500283] uhci_hcd: USB Universal Host Controller Interface driver
[    0.500308] uhci_hcd 0000:00:1a.0: >setting latency timer to 64
[    0.500312] uhci_hcd 0000:00:1a.0: >UHCI Host Controller
[    0.500318] uhci_hcd 0000:00:1a.0: >new USB bus registered, assigned bus number 3
[    0.500356] uhci_hcd 0000:00:1a.0: >irq 16, io base 0x00001800
[    0.500392] usb usb3: >New USB device found, idVendor=1d6b, idProduct=0001
[    0.500395] usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.500397] usb usb3: >Product: UHCI Host Controller
[    0.500400] usb usb3: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
[    0.500402] usb usb3: >SerialNumber: 0000:00:1a.0
[    0.500510] hub 3-0:1.0: >USB hub found
[    0.500516] hub 3-0:1.0: >2 ports detected
[    0.500585] uhci_hcd 0000:00:1a.1: >setting latency timer to 64
[    0.500589] uhci_hcd 0000:00:1a.1: >UHCI Host Controller
[    0.500594] uhci_hcd 0000:00:1a.1: >new USB bus registered, assigned bus number 4
[    0.500631] uhci_hcd 0000:00:1a.1: >irq 21, io base 0x00001820
[    0.500667] usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001
[    0.500670] usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.500672] usb usb4: >Product: UHCI Host Controller
[    0.500674] usb usb4: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
[    0.500676] usb usb4: >SerialNumber: 0000:00:1a.1
[    0.500768] hub 4-0:1.0: >USB hub found
[    0.500772] hub 4-0:1.0: >2 ports detected
[    0.500844] uhci_hcd 0000:00:1a.2: >setting latency timer to 64
[    0.500847] uhci_hcd 0000:00:1a.2: >UHCI Host Controller
[    0.500853] uhci_hcd 0000:00:1a.2: >new USB bus registered, assigned bus number 5
[    0.500881] uhci_hcd 0000:00:1a.2: >irq 20, io base 0x00001840
[    0.500914] usb usb5: >New USB device found, idVendor=1d6b, idProduct=0001
[    0.500917] usb usb5: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.500919] usb usb5: >Product: UHCI Host Controller
[    0.500921] usb usb5: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
[    0.500923] usb usb5: >SerialNumber: 0000:00:1a.2
[    0.501010] hub 5-0:1.0: >USB hub found
[    0.501014] hub 5-0:1.0: >2 ports detected
[    0.501083] uhci_hcd 0000:00:1d.0: >setting latency timer to 64
[    0.501087] uhci_hcd 0000:00:1d.0: >UHCI Host Controller
[    0.501092] uhci_hcd 0000:00:1d.0: >new USB bus registered, assigned bus number 6
[    0.501121] uhci_hcd 0000:00:1d.0: >irq 23, io base 0x00001860
[    0.501154] usb usb6: >New USB device found, idVendor=1d6b, idProduct=0001
[    0.501157] usb usb6: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.501159] usb usb6: >Product: UHCI Host Controller
[    0.501161] usb usb6: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
[    0.501163] usb usb6: >SerialNumber: 0000:00:1d.0
[    0.501256] hub 6-0:1.0: >USB hub found
[    0.501261] hub 6-0:1.0: >2 ports detected
[    0.501338] uhci_hcd 0000:00:1d.1: >setting latency timer to 64
[    0.501342] uhci_hcd 0000:00:1d.1: >UHCI Host Controller
[    0.501349] uhci_hcd 0000:00:1d.1: >new USB bus registered, assigned bus number 7
[    0.501387] uhci_hcd 0000:00:1d.1: >irq 19, io base 0x00001880
[    0.501422] usb usb7: >New USB device found, idVendor=1d6b, idProduct=0001
[    0.501425] usb usb7: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.501427] usb usb7: >Product: UHCI Host Controller
[    0.501429] usb usb7: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
[    0.501431] usb usb7: >SerialNumber: 0000:00:1d.1
[    0.501520] hub 7-0:1.0: >USB hub found
[    0.501524] hub 7-0:1.0: >2 ports detected
[    0.501592] uhci_hcd 0000:00:1d.2: >setting latency timer to 64
[    0.501596] uhci_hcd 0000:00:1d.2: >UHCI Host Controller
[    0.501602] uhci_hcd 0000:00:1d.2: >new USB bus registered, assigned bus number 8
[    0.501640] uhci_hcd 0000:00:1d.2: >irq 18, io base 0x000018a0
[    0.501676] usb usb8: >New USB device found, idVendor=1d6b, idProduct=0001
[    0.501679] usb usb8: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.501681] usb usb8: >Product: UHCI Host Controller
[    0.501683] usb usb8: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
[    0.501685] usb usb8: >SerialNumber: 0000:00:1d.2
[    0.501775] hub 8-0:1.0: >USB hub found
[    0.501779] hub 8-0:1.0: >2 ports detected
[    0.501910] usbcore: registered new interface driver libusual
[    0.501948] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.568354] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.568361] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.568494] mousedev: PS/2 mouse device common for all mice
[    0.573586] rtc_cmos 00:06: >RTC can wake from S4
[    0.573740] rtc_cmos 00:06: >rtc core: registered rtc_cmos as rtc0
[    0.573816] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.573926] device-mapper: uevent: version 1.0.3
[    0.573996] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    0.574069] cpuidle: using governor ladder
[    0.574165] cpuidle: using governor menu
[    0.574167] EFI Variables Facility v0.08 2004-May-17
[    0.574512] ashmem: initialized
[    0.574706] TCP: cubic registered
[    0.574878] NET: Registered protocol family 10
[    0.575118] NET: Registered protocol family 17
[    0.575129] Key type dns_resolver registered
[    0.575304] PM: Hibernation image not present or could not be loaded.
[    0.575318] registered taskstats version 1
[    0.577982] Key type trusted registered
[    0.580763] Key type encrypted registered
[    0.583797] ACPI: Battery Slot [BAT1] (battery present)
[    0.583846]   Magic number: 8:692:991
[    0.583987] rtc_cmos 00:06: >setting system clock to 2012-12-23 14:57:37 UTC (1356274657)
[    0.588580] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.588582] EDD information not available.
[    0.636840] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    0.788068] ata1: SATA *bağlantı up 1.5 Gbps (SStatus 113 SControl 300)
[    0.789094] ata1.00: ATA-8: HITACHI HTS545025B9A300, PB2ZC61H, max UDMA/100
[    0.789098] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.790288] ata1.00: configured for UDMA/100
[    0.790438] scsi 0:0:0:0: >Direct-Access     ATA      HITACHI HTS54502 PB2Z PQ: 0 ANSI: 5
[    0.790564] sd 0:0:0:0: >[sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    0.790582] sd 0:0:0:0: >Attached scsi generic sg0 type 0
[    0.790613] sd 0:0:0:0: >[sda] Write Protect is off
[    0.790616] sd 0:0:0:0: >[sda] Mode Sense: 00 3a 00 00
[    0.790645] sd 0:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.839668]  sda: sda1 sda2 sda3 < sda5 > sda4
[    0.840244] sd 0:0:0:0: >[sda] Attached SCSI disk
[    0.964077] usb 2-3: >new high-speed USB device number 3 using ehci_hcd
[    1.108053] ata2: SATA *bağlantı up 1.5 Gbps (SStatus 113 SControl 300)
[    1.110448] ata2.00: ATAPI: SlimtypeDVD A DS8A4S, JL61, max UDMA/100
[    1.111715] ata2.00: configured for UDMA/100
[    1.117145] scsi 1:0:0:0: >CD-ROM            Slimtype DVD A DS8A4S     JL61 PQ: 0 ANSI: 5
[    1.122813] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda pop-up
[    1.122816] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.122942] sr 1:0:0:0: >Attached scsi CD-ROM sr0
[    1.123026] sr 1:0:0:0: >Attached scsi generic sg1 type 5
[    1.208940] usb 2-3: >New USB device found, idVendor=5986, idProduct=0145
[    1.208943] usb 2-3: >New USB device strings: Mfr=3, Product=1, SerialNumber=0
[    1.208946] usb 2-3: >Product: Lenovo EasyCamera
[    1.208948] usb 2-3: >Manufacturer: Bison Electronics Inc.
[    1.440064] ata5: SATA *bağlantı down (SStatus 0 SControl 300)
[    1.441477] Freeing unused kernel memory: 928k freed
[    1.441759] Write protecting the kernel read-only data: 12288k
[    1.446653] Freeing unused kernel memory: 1472k freed
[    1.450893] Freeing unused kernel memory: 1124k freed
[    1.464046] usb 3-1: >new full-speed USB device number 2 using uhci_hcd
[    1.471505] udevd[100]: starting version 175
[    1.576993] tg3.c:v3.123 (March 21, 2012)
[    1.584299] ssb: Found chip with id 0x4312, rev 0x01 and package 0x00
[    1.584319] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x16, vendor 0x4243)
[    1.584336] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0F, vendor 0x4243)
[    1.584353] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x0A, vendor 0x4243)
[    1.584370] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x09, vendor 0x4243)
[    1.630743] tg3 0000:07:00.0: >eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address 00:26:22:cf:3b:5f
[    1.630749] tg3 0000:07:00.0: >eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0], EEE[0])
[    1.630752] tg3 0000:07:00.0: >eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[0]
[    1.630755] tg3 0000:07:00.0: >eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    1.637420] usb 3-1: >New USB device found, idVendor=0a5c, idProduct=2150
[    1.637425] usb 3-1: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.637428] usb 3-1: >Product: BCM2046 Bluetooth Device
[    1.637430] usb 3-1: >Manufacturer: Broadcom Corp
[    1.637432] usb 3-1: >SerialNumber: 0C6076A8723B
[    1.656304] ssb: Sonics Silicon Backplane found on PCI device 0000:04:00.0
[    1.880078] usb 6-1: >new low-speed USB device number 2 using uhci_hcd
[    2.079185] usb 6-1: >New USB device found, idVendor=04d9, idProduct=0499
[    2.079189] usb 6-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.128252] usbcore: registered new interface driver usbhid
[    2.128256] usbhid: USB HID core driver
[    2.130659] input: HID 04d9:0499 as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input5
[    2.130780] hid-generic 0003:04D9:0499.0001: >input,hidraw0: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:1d.0-1/input0
[    2.643586] kjournald starting.  Commit interval 5 seconds
[    2.643695] EXT3-fs (loop0): mounted filesystem with ordered data mode
[   25.212037] Adding 262140k swap on /host/ubuntu/disks/swap.disk.  Priority:-1 extents:1 across:262140k
[   25.219127] IPv6: ADDRCONF(NETDEV_UP): eth0: *bağlantı is not ready
[   25.231713] udevd[378]: starting version 175
[   25.243098] EXT3-fs (loop0): using internal journal
[   25.332407] wmi: Mapper loaded
[   25.338018] acpi device:03: >registered as cooling_device2
[   25.338086] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   25.338230] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input6
[   25.342095] [drm] Initialized drm 1.1.0 20060810
[   25.384141] ACPI Warning: 0x0000000000000460-0x000000000000047f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[   25.384151] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   25.384153] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
[   25.384157] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[   25.384161] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   25.384165] ACPI Warning: 0x0000000000001180-0x00000000000011bf SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
[   25.384169] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   25.384171] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   25.385545] nouveau 0000:01:00.0: >power state changed by ACPI to D0
[   25.385558] nouveau 0000:01:00.0: >power state changed by ACPI to D0
[   25.431997] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x0a8a00a2)
[   25.438581] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
[   25.442468] Bluetooth: Core ver 2.16
[   25.442523] NET: Registered protocol family 31
[   25.442525] Bluetooth: HCI device and connection manager initialized
[   25.442527] Bluetooth: HCI socket layer initialized
[   25.442529] Bluetooth: L2CAP socket layer initialized
[   25.442535] Bluetooth: SCO socket layer initialized
[   25.443498] usbcore: registered new interface driver btusb
[   25.453792] cfg80211: Calling CRDA to update world regulatory domain
[   25.526397] input: Ideapad extra buttons as /devices/platform/ideapad/input/input7
[   25.548731] [drm] nouveau 0000:01:00.0: ... appears to be valid
[   25.548736] [drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN
[   25.548740] [drm] nouveau 0000:01:00.0: BIT BIOS found
[   25.548743] [drm] nouveau 0000:01:00.0: Bios version 70.18.2b.00
[   25.548747] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[   25.550847] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
[   25.550852] [drm] nouveau 0000:01:00.0: DCB version 4.0
[   25.550855] [drm] nouveau 0000:01:00.0: DCB outp 00: 01010323 00010034
[   25.550857] [drm] nouveau 0000:01:00.0: DCB outp 01: 02001300 00000000
[   25.550859] [drm] nouveau 0000:01:00.0: DCB outp 02: 02025362 00020010
[   25.550860] [drm] nouveau 0000:01:00.0: DCB conn 00: 00000040
[   25.550863] [drm] nouveau 0000:01:00.0: DCB conn 01: 00000100
[   25.550865] [drm] nouveau 0000:01:00.0: DCB conn 02: 00000310
[   25.550866] [drm] nouveau 0000:01:00.0: DCB conn 03: 00000311
[   25.550868] [drm] nouveau 0000:01:00.0: DCB conn 04: 00000313
[   25.550870] [drm] nouveau 0000:01:00.0: DCB conn 05: 00002461
[   25.550927] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xDDE0
[   25.590871] [drm] nouveau 0000:01:00.0: 0xE136: Condition still not met after 20ms, skipping following opcodes
[   25.610752] [drm] nouveau 0000:01:00.0: 0xE13A: Condition still not met after 20ms, skipping following opcodes
[   25.618587] Linux video capture interface: v2.00
[   25.622157] b43-phy0: Broadcom 4312 WLAN found (core revision 15)
[   25.629487] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0145)
[   25.630653] [drm] nouveau 0000:01:00.0: 0xE304: Condition still not met after 20ms, skipping following opcodes
[   25.630672] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xE331
[   25.633717] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3:1.0/input/input8
[   25.635671] usbcore: registered new interface driver uvcvideo
[   25.635675] USB Video Class driver (1.1.1)
[   25.637060] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xEE03
[   25.637079] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEE38
[   25.680084] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEFEB
[   25.680088] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xF050
[   25.699945] [drm] nouveau 0000:01:00.0: 0xF050: Condition still not met after 20ms, skipping following opcodes
[   25.708529] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
[   25.710936] [TTM] Zone  kernel: Available graphics memory: 1023124 kiB
[   25.710940] [TTM] Initializing pool allocator
[   25.710946] [TTM] Initializing DMA pool allocator
[   25.710959] [drm] nouveau 0000:01:00.0: Detected 512MiB VRAM (DDR2)
[   25.711633] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[   25.854482] snd_hda_intel 0000:00:1b.0: >power state changed by ACPI to D0
[   25.854490] snd_hda_intel 0000:00:1b.0: >power state changed by ACPI to D0
[   25.855627] snd_hda_intel 0000:00:1b.0: >irq 47 for MSI/MSI-X
[   25.914897] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   25.914902] [drm] No driver support for vblank timestamp query.
[   25.914905] [drm] nouveau 0000:01:00.0: ACPI backlight interface available, not registering our own
[   25.920540] Broadcom 43xx driver loaded [ Features: PNL ]
[   25.952387] cfg80211: World regulatory domain updated:
[   25.952392] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   25.952395] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   25.952398] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   25.952399] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   25.952401] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   25.952403] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   25.964563] [drm] nouveau 0000:01:00.0: 3 available performance level(s)
[   25.964570] [drm] nouveau 0000:01:00.0: 0: core 135MHz shader 270MHz memory 135MHz voltage 850mV
[   25.964573] [drm] nouveau 0000:01:00.0: 1: core 405MHz shader 810MHz memory 405MHz voltage 850mV
[   25.964576] [drm] nouveau 0000:01:00.0: 3: core 606MHz shader 1468MHz memory 500MHz voltage 1000mV
[   25.964579] [drm] nouveau 0000:01:00.0: c: core 405MHz shader 810MHz memory 405MHz voltage 800mV
[   25.984495] [drm] nouveau 0000:01:00.0: MM: using COPY for buffer copies
[   26.050974] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   26.050978] Bluetooth: BNEP filters: protocol multicast
[   26.169954] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
[   26.191304] b43-phy0 ERROR: Firmware file "b43/ucode15.fw" not found
[   26.191308] b43-phy0 ERROR: Firmware file "b43-open/ucode15.fw" not found
[   26.191311] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[   26.221247] lp: driver loaded but no devices found
[   26.243208] ppdev: user-space parallel port driver
[   26.277184] Bluetooth: RFCOMM TTY layer initialized
[   26.277192] Bluetooth: RFCOMM socket layer initialized
[   26.277193] Bluetooth: RFCOMM ver 1.11
[   27.053369] type=1400 audit(1356267483.967:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=666 comm="apparmor_parser"
[   27.053927] type=1400 audit(1356267483.967:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=666 comm="apparmor_parser"
[   27.109858] init: failsafe main process (681) killed by TERM signal
[   27.247529] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   27.427097] tg3 0000:07:00.0: >irq 48 for MSI/MSI-X
[   27.446727] [drm] nouveau 0000:01:00.0: allocated 1366x768 fb: 0x2c0000, bo ffff880036dadc00
[   27.446891] fbcon: nouveaufb (fb0) is primary device
[   27.447008] Console: switching to colour frame buffer device 170x48
[   27.447041] fb0: nouveaufb frame buffer device
[   27.447043] drm: registered panic notifier
[   27.447050] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0
[   27.447099] hda_intel: Disabling MSI
[   27.447115] hda-intel: 0000:01:00.1: Handle VGA-switcheroo audio client
[   27.476500] IPv6: ADDRCONF(NETDEV_UP): eth0: *bağlantı is not ready
[   27.477460] IPv6: ADDRCONF(NETDEV_UP): eth0: *bağlantı is not ready
[   27.478079] type=1400 audit(1356267484.391:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=760 comm="apparmor_parser"
[   27.478455] type=1400 audit(1356267484.391:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=760 comm="apparmor_parser"
[   27.488888] type=1400 audit(1356267484.403:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=761 comm="apparmor_parser"
[   27.489273] type=1400 audit(1356267484.403:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=761 comm="apparmor_parser"
[   27.520822] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input9
[   27.581092] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input10
[   27.611740] type=1400 audit(1356267484.523:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=791 comm="apparmor_parser"
[   27.612135] type=1400 audit(1356267484.527:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=791 comm="apparmor_parser"
[   27.645539] type=1400 audit(1356267484.559:10): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=794 comm="apparmor_parser"
[   27.645994] type=1400 audit(1356267484.559:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=794 comm="apparmor_parser"
[   28.440151] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[   28.440324] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[   28.440455] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[   28.440578] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
bora@ubuntu:~$ dmesg | tail
[   27.520822] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input9
[   27.581092] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input10
[   27.611740] type=1400 audit(1356267484.523:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=791 comm="apparmor_parser"
[   27.612135] type=1400 audit(1356267484.527:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=791 comm="apparmor_parser"
[   27.645539] type=1400 audit(1356267484.559:10): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=794 comm="apparmor_parser"
[   27.645994] type=1400 audit(1356267484.559:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=794 comm="apparmor_parser"
[   28.440151] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[   28.440324] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[   28.440455] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[   28.440578] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
bora@ubuntu:~$

ct

#6
23 Aralık 2012 - 17:07:50
Sonuncusunu vermişsiniz sanırım sadece fakat oradaki şu kısım b43 yazılımının kurulamadığını:

Kod Seç
[   26.191304] b43-phy0 ERROR: Firmware file "b43/ucode15.fw" not found
[   26.191308] b43-phy0 ERROR: Firmware file "b43-open/ucode15.fw" not found
[   26.191311] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[   26.221247] lp: driver loaded but no devices found

İnternetsiz kurulumu şuradaki gibi olacak:

http://forum.ubuntu-tr.net/index.php?topic=37233.msg447856#msg447856

Ancak kabloyla internete bağlanıtsanız işiniz daha kolay olacaktır. Kendim denemedim ancak şurada birisi internet varken nasıl çözüleceğini açıklamış:

http://sanalparmak.com/2012/04/21/cozum-ubuntu-wireless-problemi/

Yazdır
Yukarı git Sayfa1
Kullanıcı Eylemleri