[Çözüldü] RTL8111/8168B Ubuntu 12.10 Kablolu İnternet Sorunu

[tlg]

Ubuntu 12.10 sürümünü yeni kurdum. Kurulduktan 3-4 saat kadar internete bağlanabiliyordum daha sonra birden kesildi. Kablolu bağlantı kullanıyorum, bağlı görünüyorum ancak internete giremiyorum, win7 de sorunsuz bir şekilde bağlanabiliyorum.

cat /etc/lsb-release

Kod Seç Genişlet

DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=12.10
DISTRIB_CODENAME=quantal
DISTRIB_DESCRIPTION="Ubuntu 12.10"

uname -a

Kod Seç Genişlet

Linux tlg 3.5.0-17-generic #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux

lspci

Kod Seç Genişlet

00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5)
00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b5)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 540M] (rev a1)
03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)

lsusb

Kod Seç Genişlet

Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0cf3:3005 Atheros Communications, Inc. AR3011 Bluetooth
Bus 001 Device 004: ID 058f:a014 Alcor Micro Corp. Asus Integrated Webcam
Bus 002 Device 003: ID 04f3:00a4 Elan Microelectronics Corp.

rfkill list

Kod Seç Genişlet

0: hci0: Bluetooth
Soft blocked: yes
Hard blocked: no
1: phy0: Wireless LAN
Soft blocked: yes
Hard blocked: no
2: asus-wlan: Wireless LAN
Soft blocked: yes
Hard blocked: no
3: asus-bluetooth: Bluetooth
Soft blocked: yes
Hard blocked: no

sudo lshw -C network

Kod Seç Genişlet

*-network ETKİSİZLEŞTİRİLDİ
       Açıklama: Kablosuz arayüz
       Ürün: AR9285 Wireless Network Adapter (PCI-Express)
       Üretici: Atheros Communications Inc.
       physical id: 0
       bus info: pci@0000:03:00.0
       mantısal ad: wlan0
       sürüm: 01
       serial: e0:b9:a5:9a:d3:e1
       genişlik: 64 bits
       saat: 33MHz
       kapasiteler: pm msi pciexpress bus_master cap_list eternet physical wireless
       yapılandırma: broadcast=yes driver=ath9k driverversion=3.5.0-17-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn
       kaynaklar: irq:17 bellek:de200000-de20ffff
  *-network
       Açıkklama: Eternet interface
       Ürün: RTL8111/8168B PCI Express Gigabit Ethernet controller
       Üretici: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:04:00.0
       mantıksal ad: eth0
       sürüm: 06
       serial: f4:6d:04:30:98:69
       boyut: 100Mbit/s
       kapasite: 1Gbit/s
       genişlik: 64 bits
       saat: 33MHz
       kapasiteler: pm msi pciexpress msix vpd bus_master cap_list eternet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
       yapılandırma: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168e-2.fw ip=192.168.2.2 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s
       kaynaklar: irq:42 ioport:a000(boyut=256) bellek:d2104000-d2104fff bellek:d2100000-d2103fff

ifconfig

Kod Seç Genişlet

eth0      Link encap:Ethernet  HWaddr f4:6d:04:30:98:69 
          inet addr:192.168.2.2  Bcast:192.168.2.255  Mask:255.255.255.0
          inet6 addr: fe80::f66d:4ff:fe30:9869/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:144 errors:0 dropped:0 overruns:0 frame:0
          TX packets:555 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:15442 (15.4 KB)  TX bytes:37369 (37.3 KB)

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Sunucu
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:1101 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1101 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0

iwconfig

Kod Seç Genişlet

eth0      no wireless extensions.

lo        no wireless extensions.

wlan0     IEEE 802.11bgn  ESSID:off/any 
          Mode:Managed  Access Point: Not-Associated   Tx-Power=off   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Power Management:off

lsmod

Kod Seç Genişlet

Module                  Size  Used by
parport_pc             32688  0
snd_hda_codec_hdmi     32007  1
ppdev                  17073  0
snd_hda_codec_realtek    77876  1
bnep                   18140  2
rfcomm                 46619  0
coretemp               13400  0
kvm_intel             132759  0
kvm                   414070  1 kvm_intel
ghash_clmulni_intel    13180  0
aesni_intel            51037  0
cryptd                 20403  2 ghash_clmulni_intel,aesni_intel
aes_x86_64             17208  1 aesni_intel
snd_hda_intel          33491  3
snd_hda_codec         134212  3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep              13602  1 snd_hda_codec
snd_pcm                96580  3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
snd_seq_midi           13324  0
snd_rawmidi            30512  1 snd_seq_midi
snd_seq_midi_event     14899  1 snd_seq_midi
snd_seq                61521  2 snd_seq_midi,snd_seq_midi_event
uvcvideo               76749  0
snd_timer              29425  2 snd_pcm,snd_seq
arc4                   12529  2
snd_seq_device         14497  3 snd_seq_midi,snd_rawmidi,snd_seq
i915                  520519  3
snd                    78734  16 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
asus_nb_wmi            12710  0
asus_wmi               24088  1 asus_nb_wmi
sparse_keymap          13890  1 asus_wmi
ath9k                 131308  0
nouveau               895609  1
videobuf2_core         32851  1 uvcvideo
videodev              120309  2 uvcvideo,videobuf2_core
videobuf2_vmalloc      12860  1 uvcvideo
videobuf2_memops       13368  1 videobuf2_vmalloc
mei                    40690  0
joydev                 17457  0
mac_hid                13205  0
ttm                    83595  1 nouveau
soundcore              15047  1 snd
snd_page_alloc         18484  2 snd_hda_intel,snd_pcm
mac80211              539908  1 ath9k
microcode              22803  0
psmouse                95552  0
ath9k_common           14055  1 ath9k
ath9k_hw              395218  2 ath9k,ath9k_common
btusb                  18334  0
ath                    23827  3 ath9k,ath9k_common,ath9k_hw
bluetooth             209199  12 bnep,rfcomm,btusb
cfg80211              206566  3 ath9k,mac80211,ath
lpc_ich                17061  0
drm_kms_helper         46784  2 i915,nouveau
serio_raw              13215  0
drm                   275528  7 i915,nouveau,ttm,drm_kms_helper
lp                     17759  0
parport                46345  3 parport_pc,ppdev,lp
mxm_wmi                12979  1 nouveau
wmi                    19070  3 asus_wmi,nouveau,mxm_wmi
i2c_algo_bit           13413  2 i915,nouveau
video                  19335  2 i915,nouveau
hid_generic            12493  0
usbhid                 46947  0
hid                   100366  2 hid_generic,usbhid
r8169                  61650  0

dmesg

Kod Seç Genişlet

[    1.600365] software IO TLB [mem 0xa6ce0000-0xaacdffff] (64MB) mapped at [ffff8800a6ce0000-ffff8800aacdffff]
[    1.600825] audit: initializing netlink socket (disabled)
[    1.600833] type=2000 audit(1351381735.488:1): initialized
[    1.622552] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.623841] VFS: Disk quotas dquot_6.5.2
[    1.623880] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.624301] fuse init (API version 7.19)
[    1.624370] msgmni has been set to 7723
[    1.624693] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.624720] io scheduler noop registered
[    1.624722] io scheduler deadline registered (default)
[    1.624743] io scheduler cfq registered
[    1.624829] pcieport 0000:00:01.0: >irq 40 for MSI/MSI-X
[    1.624998] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.625013] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.625047] intel_idle: MWAIT substates: 0x21120
[    1.625048] intel_idle: v0.4 model 0x2A
[    1.625049] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.625126] ACPI: AC Adapter [AC0] (on-line)
[    1.625208] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    1.626432] ACPI: Lid Switch [LID]
[    1.626463] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[    1.626466] ACPI: Sleep Button [SLPB]
[    1.626493] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.626495] ACPI: Power Button [PWRF]
[    1.626553] ACPI: Requesting acpi_cpufreq
[    1.733103] thermal LNXTHERM:00: >registered as thermal_zone0
[    1.733106] ACPI: Thermal Zone [TZ00] (52 C)
[    1.733124] ACPI: Battery Slot [BAT0] (battery present)
[    1.733160] GHES: HEST is not enabled!
[    1.733242] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.733874] ACPI: Battery Slot [BAT0] (battery present)
[    1.734501] Linux agpgart interface v0.103
[    1.735578] brd: module loaded
[    1.736138] loop: module loaded
[    1.736236] ahci 0000:00:1f.2: >version 3.0
[    1.736298] ahci 0000:00:1f.2: >irq 41 for MSI/MSI-X
[    1.736350] ahci 0000:00:1f.2: >AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[    1.736353] ahci 0000:00:1f.2: >flags: 64bit ncq sntf pm led clo pio slum part ems apst
[    1.736358] ahci 0000:00:1f.2: >setting latency timer to 64
[    1.744619] scsi0 : ahci
[    1.744681] scsi1 : ahci
[    1.744732] scsi2 : ahci
[    1.744782] scsi3 : ahci
[    1.744836] scsi4 : ahci
[    1.744886] scsi5 : ahci
[    1.745198] ata1: SATA max UDMA/133 abar m2048@0xdf606000 port 0xdf606100 irq 41
[    1.745201] ata2: SATA max UDMA/133 abar m2048@0xdf606000 port 0xdf606180 irq 41
[    1.745203] ata3: DUMMY
[    1.745204] ata4: DUMMY
[    1.745205] ata5: DUMMY
[    1.745206] ata6: DUMMY
[    1.745462] Fixed MDIO Bus: probed
[    1.745492] tun: Universal TUN/TAP device driver, 1.6
[    1.745493] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.745525] PPP generic driver version 2.4.2
[    1.745563] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.745594] ehci_hcd 0000:00:1a.0: >setting latency timer to 64
[    1.745598] ehci_hcd 0000:00:1a.0: >EHCI Host Controller
[    1.745602] ehci_hcd 0000:00:1a.0: >new USB bus registered, assigned bus number 1
[    1.745629] ehci_hcd 0000:00:1a.0: >debug port 2
[    1.749498] ehci_hcd 0000:00:1a.0: >cache line size of 64 is not supported
[    1.749511] ehci_hcd 0000:00:1a.0: >irq 16, io mem 0xdf608000
[    1.760217] ehci_hcd 0000:00:1a.0: >USB 2.0 started, EHCI 1.00
[    1.760256] usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
[    1.760262] usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.760266] usb usb1: >Product: EHCI Host Controller
[    1.760271] usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
[    1.760276] usb usb1: >SerialNumber: 0000:00:1a.0
[    1.760393] hub 1-0:1.0: >USB hub found
[    1.760397] hub 1-0:1.0: >2 ports detected
[    1.760455] ehci_hcd 0000:00:1d.0: >setting latency timer to 64
[    1.760459] ehci_hcd 0000:00:1d.0: >EHCI Host Controller
[    1.760463] ehci_hcd 0000:00:1d.0: >new USB bus registered, assigned bus number 2
[    1.760482] ehci_hcd 0000:00:1d.0: >debug port 2
[    1.764351] ehci_hcd 0000:00:1d.0: >cache line size of 64 is not supported
[    1.764363] ehci_hcd 0000:00:1d.0: >irq 23, io mem 0xdf607000
[    1.776204] ehci_hcd 0000:00:1d.0: >USB 2.0 started, EHCI 1.00
[    1.776234] usb usb2: >New USB device found, idVendor=1d6b, idProduct=0002
[    1.776240] usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.776244] usb usb2: >Product: EHCI Host Controller
[    1.776249] usb usb2: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
[    1.776253] usb usb2: >SerialNumber: 0000:00:1d.0
[    1.776372] hub 2-0:1.0: >USB hub found
[    1.776375] hub 2-0:1.0: >2 ports detected
[    1.776417] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.776428] uhci_hcd: USB Universal Host Controller Interface driver
[    1.776467] usbcore: registered new interface driver libusual
[    1.776496] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.777955] i8042: Detected active multiplexing controller, rev 1.1
[    1.778771] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.778775] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.778794] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.778809] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.778824] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.778899] mousedev: PS/2 mouse device common for all mice
[    1.779016] rtc_cmos 00:06: >RTC can wake from S4
[    1.779132] rtc_cmos 00:06: >rtc core: registered rtc_cmos as rtc0
[    1.779160] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    1.779219] device-mapper: uevent: version 1.0.3
[    1.779269] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    1.779337] cpuidle: using governor ladder
[    1.779422] cpuidle: using governor menu
[    1.779424] EFI Variables Facility v0.08 2004-May-17
[    1.779615] ashmem: initialized
[    1.779709] TCP: cubic registered
[    1.779792] NET: Registered protocol family 10
[    1.779953] NET: Registered protocol family 17
[    1.779964] Key type dns_resolver registered
[    1.780065] PM: Hibernation image not present or could not be loaded.
[    1.780075] registered taskstats version 1
[    1.782249] Key type trusted registered
[    1.784059] Key type encrypted registered
[    1.786051]   Magic number: 0:284:859
[    1.786157] rtc_cmos 00:06: >setting system clock to 2012-10-27 23:48:56 UTC (1351381736)
[    1.786807] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.786808] EDD information not available.
[    1.813036] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    2.064148] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.064192] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.065498] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[    2.065509] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    2.065516] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    2.066803] ata1.00: ATA-8: WDC WD3200BPVT-80ZEST0, 01.01A01, max UDMA/133
[    2.066811] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.068345] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[    2.068355] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    2.068361] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    2.068453] ata2.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[    2.068456] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    2.068458] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    2.068900] ata2.00: ATAPI: SlimtypeDVD A  DS8A5SH, XAA2, max UDMA/100
[    2.069642] ata1.00: configured for UDMA/133
[    2.069934] scsi 0:0:0:0: >Direct-Access     ATA      WDC WD3200BPVT-8 01.0 PQ: 0 ANSI: 5
[    2.070081] sd 0:0:0:0: >Attached scsi generic sg0 type 0
[    2.070083] sd 0:0:0:0: >[sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    2.070085] sd 0:0:0:0: >[sda] 4096-byte physical blocks
[    2.070171] sd 0:0:0:0: >[sda] Write Protect is off
[    2.070174] sd 0:0:0:0: >[sda] Mode Sense: 00 3a 00 00
[    2.070263] sd 0:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.071327] ata2.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[    2.071336] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    2.071342] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    2.071728] ata2.00: configured for UDMA/100
[    2.072077] usb 1-1: >new high-speed USB device number 2 using ehci_hcd
[    2.106351]  sda: sda1 sda2 sda3 sda4
[    2.107200] sd 0:0:0:0: >[sda] Attached SCSI disk
[    2.112090] scsi 1:0:0:0: >CD-ROM            Slimtype DVD A  DS8A5SH   XAA2 PQ: 0 ANSI: 5
[    2.117724] sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.117734] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.117877] sr 1:0:0:0: >Attached scsi CD-ROM sr0
[    2.117943] sr 1:0:0:0: >Attached scsi generic sg1 type 5
[    2.119194] Freeing unused kernel memory: 928k freed
[    2.119280] Write protecting the kernel read-only data: 12288k
[    2.122593] Freeing unused kernel memory: 1472k freed
[    2.125047] Freeing unused kernel memory: 1124k freed
[    2.137125] udevd[112]: starting version 175
[    2.177622] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.177744] r8169 0000:04:00.0: >irq 42 for MSI/MSI-X
[    2.177916] r8169 0000:04:00.0: >eth0: RTL8168e/8111e at 0xffffc9000062c000, f4:6d:04:30:98:69, XID 0c200000 IRQ 42
[    2.177919] r8169 0000:04:00.0: >eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.204483] usb 1-1: >New USB device found, idVendor=8087, idProduct=0024
[    2.204493] usb 1-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.204759] hub 1-1:1.0: >USB hub found
[    2.204845] hub 1-1:1.0: >6 ports detected
[    2.315942] usb 2-1: >new high-speed USB device number 2 using ehci_hcd
[    2.448341] usb 2-1: >New USB device found, idVendor=8087, idProduct=0024
[    2.448351] usb 2-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.448595] hub 2-1:1.0: >USB hub found
[    2.448692] hub 2-1:1.0: >6 ports detected
[    2.520035] usb 1-1.1: >new full-speed USB device number 3 using ehci_hcd
[    2.599775] Refined TSC clocksource calibration: 2294.786 MHz.
[    2.599785] Switching to clocksource tsc
[    2.612882] usb 1-1.1: >New USB device found, idVendor=0cf3, idProduct=3005
[    2.612892] usb 1-1.1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.683853] usb 1-1.2: >new high-speed USB device number 4 using ehci_hcd
[    2.907476] usb 1-1.2: >New USB device found, idVendor=058f, idProduct=a014
[    2.907486] usb 1-1.2: >New USB device strings: Mfr=3, Product=1, SerialNumber=0
[    2.907492] usb 1-1.2: >Product: ASUS USB2.0 WebCam
[    2.907497] usb 1-1.2: >Manufacturer: 04G6200086K0AN13V0018C6
[    2.987806] usb 2-1.2: >new low-speed USB device number 3 using ehci_hcd
[    3.059649] usb 2-1.2: >device descriptor read/64, error -32
[    3.142747] EXT4-fs (sda4): INFO: recovery required on readonly filesystem
[    3.142750] EXT4-fs (sda4): write access will be enabled during recovery
[    3.316364] usb 2-1.2: >New USB device found, idVendor=04f3, idProduct=00a4
[    3.316367] usb 2-1.2: >New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    3.316369] usb 2-1.2: >Product: 2.4G RX
[    3.404481] usbcore: registered new interface driver usbhid
[    3.404484] usbhid: USB HID core driver
[    3.406029] input: 2.4G RX as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input4
[    3.406164] hid-generic 0003:04F3:00A4.0001: >input,hidraw0: USB HID v1.10 Keyboard [2.4G RX] on usb-0000:00:1d.0-1.2/input0
[    5.179358] EXT4-fs (sda4): recovery complete
[    5.190145] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[   15.218237] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.525998] udevd[367]: starting version 175
[   15.841827] wmi: Mapper loaded
[   15.843908] [drm] Initialized drm 1.1.0 20060810
[   15.844632] ACPI Warning: 0x0000000000000460-0x000000000000047f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[   15.844639] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   15.844641] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
[   15.844644] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[   15.844648] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   15.844651] ACPI Warning: 0x0000000000000500-0x000000000000057f SystemIO conflicts with Region \SBGP 1 (20120320/utaddress-251)
[   15.844655] ACPI Warning: 0x0000000000000500-0x000000000000057f SystemIO conflicts with Region \GPIO 2 (20120320/utaddress-251)
[   15.844659] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   15.844660] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   15.845395] cfg80211: Calling CRDA to update world regulatory domain
[   15.845626] Bluetooth: Core ver 2.16
[   15.845640] NET: Registered protocol family 31
[   15.845641] Bluetooth: HCI device and connection manager initialized
[   15.845643] Bluetooth: HCI socket layer initialized
[   15.845645] Bluetooth: L2CAP socket layer initialized
[   15.845649] Bluetooth: SCO socket layer initialized
[   15.846029] lp: driver loaded but no devices found
[   15.846283] usbcore: registered new interface driver btusb
[   15.850260] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1b
[   15.853245] mei 0000:00:16.0: >setting latency timer to 64
[   15.853309] mei 0000:00:16.0: >irq 43 for MSI/MSI-X
[   15.854643] Linux video capture interface: v2.00
[   15.869647] mei 0000:00:16.0: >wd: failed to find the client
[   15.889178] MXM: GUID detected in BIOS
[   15.889611] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEGR.GFX0 handle
[   15.889640] nouveau 0000:01:00.0: >power state changed by ACPI to D0
[   15.889644] nouveau 0000:01:00.0: >power state changed by ACPI to D0
[   15.889649] nouveau 0000:01:00.0: >enabling device (0000 -> 0003)
[   15.889876] [drm] nouveau 0000:01:00.0: Detected an NVc0 generation card (0x0c1a00a1)
[   15.895943] asus_wmi: ASUS WMI generic driver loaded
[   15.896210] asus_wmi: Initialization: 0x1asus_wmi: SFUN value: 0x1a0af7
[   15.897037] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input5
[   15.901317] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
[   15.911034] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[   15.911036] [drm] nouveau 0000:01:00.0: Checking PROM for VBIOS
[   15.911117] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[   15.911118] [drm] nouveau 0000:01:00.0: Checking ACPI for VBIOS
[   15.919560] cfg80211: World regulatory domain updated:
[   15.919564] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   15.919566] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   15.919568] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   15.919570] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   15.919572] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   15.919574] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   15.922295] ath: EEPROM regdomain: 0x60
[   15.922298] ath: EEPROM indicates we should expect a direct regpair map
[   15.922300] ath: Country alpha2 being used: 00
[   15.922302] ath: Regpair used: 0x60
[   15.922305] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   15.922307] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   15.922309] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   15.922311] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   15.922312] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   15.922314] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   15.922316] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   15.922318] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   15.922320] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   15.922322] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   15.922323] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   15.922325] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   15.922327] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   15.922329] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   15.922330] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   15.922333] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   15.922334] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   15.922336] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   15.922338] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   15.922340] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   15.922341] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   15.922343] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   15.922345] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   15.922347] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   15.922348] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   15.922350] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   15.922352] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[   15.922354] cfg80211: 2474000 KHz - 2494000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   15.924609] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[   15.926798] uvcvideo: Found UVC 1.00 device ASUS USB2.0 WebCam (058f:a014)
[   15.927955] ieee80211 phy0: >Selected rate control algorithm 'ath9k_rate_control'
[   15.928313] Registered led device: ath9k-phy0
[   15.928319] ieee80211 phy0: >Atheros AR9285 Rev:2 mem=0xffffc90005180000, irq=17
[   15.930154] input: ASUS USB2.0 WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input6
[   15.930231] usbcore: registered new interface driver uvcvideo
[   15.930234] USB Video Class driver (1.1.1)
[   15.961368] type=1400 audit(1351370950.678:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=496 comm="apparmor_parser"
[   15.961496] type=1400 audit(1351370950.678:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=606 comm="apparmor_parser"
[   15.961740] type=1400 audit(1351370950.678:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=496 comm="apparmor_parser"
[   15.961782] type=1400 audit(1351370950.678:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=493 comm="apparmor_parser"
[   15.961853] type=1400 audit(1351370950.678:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=606 comm="apparmor_parser"
[   15.961960] type=1400 audit(1351370950.678:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=496 comm="apparmor_parser"
[   15.962032] type=1400 audit(1351370950.678:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=606 comm="apparmor_parser"
[   15.962154] type=1400 audit(1351370950.678:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=493 comm="apparmor_parser"
[   15.962352] type=1400 audit(1351370950.678:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=493 comm="apparmor_parser"
[   15.974262] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1b
[   15.975767] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1b
[   15.977384] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1b
[   15.978453] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   16.017438] [drm] nouveau 0000:01:00.0: ... appears to be valid
[   16.017441] [drm] nouveau 0000:01:00.0: Using VBIOS from ACPI
[   16.017443] [drm] nouveau 0000:01:00.0: BIT BIOS found
[   16.017445] [drm] nouveau 0000:01:00.0: Bios version 70.08.58.00
[   16.017447] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[   16.017733] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
[   16.017735] [drm] nouveau 0000:01:00.0: DCB version 4.0
[   16.017738] [drm] nouveau 0000:01:00.0: DCB outp 00: 02010300 00000000
[   16.017739] [drm] nouveau 0000:01:00.0: DCB conn 00: 00000100
[   16.017754] [drm] nouveau 0000:01:00.0: Adaptor not initialised, running VBIOS init tables.
[   16.017756] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD607
[   16.017900] asus_wmi: Backlight controlled by ACPI video driver
[   16.038948] [drm] nouveau 0000:01:00.0: 0xD5B1: i2c wr fail: -6
[   16.079126] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xDC63
[   16.105973] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xEE69
[   16.105978] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEE6D
[   16.106029] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEF55
[   16.106030] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xEFBA
[   16.128372] [TTM] Zone  kernel: Available graphics memory: 1979090 kiB
[   16.128374] [TTM] Initializing pool allocator
[   16.128380] [TTM] Initializing DMA pool allocator
[   16.128393] [drm] nouveau 0000:01:00.0: Detected 512MiB VRAM (DDR3)
[   16.130305] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[   16.135301] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   16.135302] [drm] No driver support for vblank timestamp query.
[   16.135303] [drm] nouveau 0000:01:00.0: ACPI backlight interface available, not registering our own
[   16.140631] [drm] nouveau 0000:01:00.0: 3 available performance level(s)
[   16.140633] [drm] nouveau 0000:01:00.0: 0: core 50MHz shader 101MHz memory 135MHz voltage 830mV
[   16.140635] [drm] nouveau 0000:01:00.0: 1: core 202MHz shader 405MHz memory 324MHz voltage 830mV
[   16.140636] [drm] nouveau 0000:01:00.0: 3: core 672MHz shader 1344MHz memory 900MHz voltage 980mV
[   16.140638] [drm] nouveau 0000:01:00.0: c: core 202MHz shader 405MHz memory 324MHz voltage 830mV
[   16.145285] [drm] nouveau 0000:01:00.0: MM: using COPY1 for buffer copies
[   16.217046] [drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x120000, bo ffff8801457c4800
[   16.217236] Console: switching to colour frame buffer device 128x48
[   16.217256] fb0: nouveaufb frame buffer device
[   16.217257] drm: registered panic notifier
[   16.217262] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0
[   16.217719] i915 0000:00:02.0: >setting latency timer to 64
[   16.218378] pci 0000:00:00.0: >Intel Sandybridge Chipset
[   16.218472] pci 0000:00:00.0: >detected gtt size: 2097152K total, 262144K mappable
[   16.219404] pci 0000:00:00.0: >detected 65536K stolen memory
[   16.253092] i915 0000:00:02.0: >irq 44 for MSI/MSI-X
[   16.253103] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   16.253105] [drm] Driver supports precise vblank timestamp query.
[   16.253196] vga_switcheroo: enabled
[   16.253221] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[   16.253224] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   16.527968] psmouse serio4: >elantech: assuming hardware version 3 (with firmware version 0x450f01)
[   16.540390] psmouse serio4: >elantech: Synaptics capabilities query result 0x78, 0x15, 0x0c.
[   16.599893] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input7
[   16.748859] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   16.904015] fbcon: inteldrmfb (fb1) is primary device
[   16.904019] fbcon: Remapping primary device, fb1, to tty 1-63
[   17.085223] fb1: inteldrmfb frame buffer device
[   17.085950] ACPI Warning: _BQC returned an invalid level (20120320/video-480)
[   17.086217] acpi device:51: >registered as cooling_device4
[   17.086234] ACPI: Video Device [GFX0] (multi-head: yes  rom: yes  post: no)
[   17.086266] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:4d/LNXVIDEO:00/input/input8
[   17.087439] ACPI Warning: _BQC returned an invalid level (20120320/video-480)
[   17.087721] acpi device:53: >registered as cooling_device5
[   17.087918] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   17.087968] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input9
[   17.088039] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 1
[   17.088160] snd_hda_intel 0000:00:1b.0: >irq 45 for MSI/MSI-X
[   17.437477] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro
[   17.469361] init: failsafe main process (836) killed by TERM signal
[   17.570241] Bluetooth: RFCOMM TTY layer initialized
[   17.570247] Bluetooth: RFCOMM socket layer initialized
[   17.570249] Bluetooth: RFCOMM ver 1.11
[   17.572625] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   17.572628] Bluetooth: BNEP filters: protocol multicast
[   17.619154] type=1400 audit(1351370952.334:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=930 comm="apparmor_parser"
[   17.630767] ppdev: user-space parallel port driver
[   17.631694] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   17.633388] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   17.633969] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   17.649698] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   17.796161] r8169 0000:04:00.0: >eth0: link down
[   17.796403] r8169 0000:04:00.0: >eth0: link down
[   17.796570] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.797042] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.204003] [drm] nouveau 0000:01:00.0: 906e not supported yet
[   18.452536] init: plymouth-stop pre-start process (1261) terminated with status 1
[   19.329776] r8169 0000:04:00.0: >eth0: link up
[   19.329996] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready


dmesg | tail

Kod Seç Genişlet

[   17.633969] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   17.649698] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   17.796161] r8169 0000:04:00.0: >eth0: link down
[   17.796403] r8169 0000:04:00.0: >eth0: link down
[   17.796570] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.797042] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.204003] [drm] nouveau 0000:01:00.0: 906e not supported yet
[   18.452536] init: plymouth-stop pre-start process (1261) terminated with status 1
[   19.329776] r8169 0000:04:00.0: >eth0: link up
[   19.329996] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

[if]

@tlg, buradaki[1] çözüm yoluna göre bilgisayarı kapatın; bataryayı çıkartın; 5 dakika bekleyin; bataryayı tekrar takın; 30 saniye kadar güç tuşuna basın; sonra bırakıp bilgisayarı başlatın. Garip bir çözüm ama işe yaramış:)

Aslında bu kart için yanlış modülün kullanıldığı söyleniyor ki hemen hemen her dağıtımda varmış bu sorun. Kartın kullanması gereken modül r8168'miş.

İlk öneri işe yaramazsa

Kod Seç Genişlet

sudo modprobe -r r8169
sudo modprobe r8168 komutlarından sonra tekrar bağlanmayı dener misiniz?

[1] http://askubuntu.com/questions/96343/internet-unusably-slow-with-realtek-semiconductor-co-ltd-rtl8111-8168b-card

[tlg]

İlk öneriyi denedim olmadı, ikinci öneride şöyle bir çıktı aldım.

Kod Seç Genişlet

FATAL: Module r8168 not found.


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 27 Ekim 2012 - 12:43:10
@if, forumda çözüm ararken sonunda şu konu sayesinde hallettim

http://forum.ubuntu-tr.net/index.php?topic=30657.msg368042#msg368042

Çözüm :

Kod Seç Genişlet

sudo ifconfig eth0 down
sudo ifconfig eth0 mtu 1024
sudo ifconfig eth0 up