[Çözüldü] ASUS K53S için wireless sorunu

[seckinylmz]

yardımcı olabilecek varmı lan ile girebiliyorum internete sadece wireless ile internet keiliyor.

[burk]

http://forum.ubuntu-tr.net/index.php?topic=28764.0
ayrıca konuyu taşıyorum.

[seckinylmz]

Teşekkür ederim bu kodları tek tekmi giriyim yoksa toplu olarakmı ?

[burk]

Rica ederim @seckinylmz, o kodları tek tek girin ve her birini, çıktıları ile birlikte teker teker kod etiketi içinde buraya geçin;
http://forum.ubuntu-tr.net/index.php?topic=14283.0
Ayrıca fourmda başlığınızla bir arama yapın, örneğin benim bulduğum bir sonuç;
http://forum.ubuntu-tr.net/index.php?topic=30729.0

[aurora]

Şu adresteki ''Wireless için'' olan bölüm benim sorunumu çözmüştü. Deneyebilirsiniz.,

http://forum.ubuntu-tr.net/index.php?topic=29303.msg352344#msg352344

[seckinylmz]

cat /etc/lsb-release

Kod Seç Genişlet

DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=11.10
DISTRIB_CODENAME=oneiric
DISTRIB_DESCRIPTION="Ubuntu 11.10"


uname -a

Kod Seç Genişlet

Linux ubuntu 3.0.0-12-generic #20-Ubuntu SMP Fri Oct 7 14:56:25 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux
lspci

Kod Seç Genişlet

00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5)
00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b5)
00:1d.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
01:00.0 VGA compatible controller: nVidia Corporation GF106 [GeForce GT 555M] (rev a1)
03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)

lsusb

Kod Seç Genişlet

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 0cf3:3005 Atheros Communications, Inc.
Bus 001 Device 004: ID 13d3:5120 IMC Networks
Bus 001 Device 005: ID 0bda:0139 Realtek Semiconductor Corp.
Bus 002 Device 003: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth

rfkill list

Kod Seç Genişlet

0: hci0: Bluetooth
Soft blocked: yes
Hard blocked: no
1: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
2: asus-wlan: Wireless LAN
Soft blocked: no
Hard blocked: no
3: asus-bluetooth: Bluetooth
Soft blocked: yes
Hard blocked: no


sudo lshw -C network

Kod Seç Genişlet

*-network               
       description: Wireless interface
       product: AR9285 Wireless Network Adapter (PCI-Express)
       vendor: Atheros Communications Inc.
       physical id: 0
       bus info: pci@0000:03:00.0
       logical name: wlan0
       version: 01
       serial: 74:2f:68:1f:91:fe
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
       configuration: broadcast=yes driver=ath9k driverversion=3.0.0-12-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn
       resources: irq:17 memory:de200000-de20ffff
  *-network
       description: Ethernet interface
       product: RTL8111/8168B PCI Express Gigabit Ethernet controller
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:04:00.0
       logical name: eth0
       version: 06
       serial: 14:da:e9:05:f1:5c
       size: 100Mbit/s
       capacity: 1Gbit/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168e-2.fw ip=192.168.1.4 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s
       resources: irq:41 ioport:a000(size=256) memory:d2104000-d2104fff memory:d2100000-d2103fff


ifconfig

Kod Seç Genişlet

eth0      Link encap:Ethernet  HWaddr 14:da:e9:05:f1:5c 
          inet addr:192.168.1.4  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::16da:e9ff:fe05:f15c/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:3272 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2431 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:3244119 (3.2 MB)  TX bytes:359233 (359.2 KB)
          Interrupt:41 Base address:0x2000

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:112 errors:0 dropped:0 overruns:0 frame:0
          TX packets:112 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:8416 (8.4 KB)  TX bytes:8416 (8.4 KB)

wlan0     Link encap:Ethernet  HWaddr 74:2f:68:1f:91:fe 
          inet6 addr: fe80::762f:68ff:fe1f:91fe/64 Scope:Link
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:60 errors:0 dropped:0 overruns:0 frame:0
          TX packets:121 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:10334 (10.3 KB)  TX bytes:27851 (27.8 KB)


iwconfig

Kod Seç Genişlet

lo        no wireless extensions.

eth0      no wireless extensions.

wlan0     IEEE 802.11bgn  ESSID:off/any 
          Mode:Managed  Access Point: Not-Associated   Tx-Power=15 dBm   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Power Management:on


iwlist scanning

Kod Seç Genişlet

lo        Interface doesn't support scanning.

eth0      Interface doesn't support scanning.

wlan0     No scan results

lsmod

Kod Seç Genişlet

Module                  Size  Used by
parport_pc             36962  0
ppdev                  17113  0
snd_hda_codec_hdmi     32040  1
snd_hda_codec_realtek   330769  1
bnep                   18436  2
rfcomm                 47946  8
binfmt_misc            17540  1
snd_hda_intel          33390  2
snd_hda_codec         104802  3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep              13668  1 snd_hda_codec
snd_pcm                96755  3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
joydev                 17693  0
snd_seq_midi           13324  0
snd_rawmidi            30547  1 snd_seq_midi
uvcvideo               72711  0
rts5139               351143  0
videodev               93004  1 uvcvideo
arc4                   12529  2
snd_seq_midi_event     14899  1 snd_seq_midi
snd_seq                61896  2 snd_seq_midi,snd_seq_midi_event
v4l2_compat_ioctl32    17083  1 videodev
snd_timer              29991  2 snd_pcm,snd_seq
asus_nb_wmi            12517  0
snd_seq_device         14540  3 snd_seq_midi,snd_rawmidi,snd_seq
asus_wmi               20035  1 asus_nb_wmi
sparse_keymap          13890  1 asus_wmi
btusb                  18600  1
bluetooth             166112  23 bnep,rfcomm,btusb
usbhid                 47198  0
hid                    95463  1 usbhid
nouveau               728662  0
ttm                    76805  1 nouveau
mxm_wmi                12979  1 nouveau
snd                    68266  14 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
ath9k                 127538  0
psmouse                73882  0
serio_raw              13166  0
mac80211              310872  1 ath9k
soundcore              12680  1 snd
ath9k_common           13839  1 ath9k
snd_page_alloc         18529  2 snd_hda_intel,snd_pcm
ath9k_hw              312866  2 ath9k,ath9k_common
ath                    24067  2 ath9k,ath9k_hw
cfg80211              199587  3 ath9k,mac80211,ath
i915                  566711  3
mei                    41480  0
wmi                    19256  2 asus_wmi,mxm_wmi
drm_kms_helper         42558  2 nouveau,i915
drm                   236330  6 nouveau,ttm,i915,drm_kms_helper
i2c_algo_bit           13423  2 nouveau,i915
video                  19412  2 nouveau,i915
lp                     17799  0
parport                46562  3 parport_pc,ppdev,lp
ahci                   26002  1
libahci                26861  1 ahci
r8169                  52788  0
dmesg

Kod Seç Genişlet

[    3.004160] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.007641] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[    3.007645] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    3.007648] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    3.008632] ata2.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[    3.008643] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    3.008651] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    3.009119] ata2.00: ATAPI: SlimtypeDVD A  DS8A5SH, XAA2, max UDMA/100
[    3.011213] ata1.00: ATA-8: WDC WD6400BPVT-80HXZT1, 01.01A01, max UDMA/133
[    3.011223] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    3.011645] ata2.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[    3.011654] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    3.011662] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    3.012046] ata2.00: configured for UDMA/100
[    3.014785] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[    3.014797] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    3.014805] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    3.018594] ata1.00: configured for UDMA/133
[    3.018801] scsi 0:0:0:0: Direct-Access     ATA      WDC WD6400BPVT-8 01.0 PQ: 0 ANSI: 5
[    3.018973] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.019046] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[    3.019049] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    3.019085] sd 0:0:0:0: [sda] Write Protect is off
[    3.019095] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.019106] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.024748] scsi 1:0:0:0: CD-ROM            Slimtype DVD A  DS8A5SH   XAA2 PQ: 0 ANSI: 5
[    3.030841] sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.030852] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.031016] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    3.031070] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    3.040763] hub 1-1:1.0: USB hub found
[    3.040864] hub 1-1:1.0: 6 ports detected
[    3.094537]  sda: sda1 sda2 sda3 < sda5 sda6 >
[    3.094902] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.152080] usb 2-1: new high speed USB device number 2 using ehci_hcd
[    3.284650] hub 2-1:1.0: USB hub found
[    3.284743] hub 2-1:1.0: 6 ports detected
[    3.356003] usb 1-1.1: new full speed USB device number 3 using ehci_hcd
[    3.367924] Refined TSC clocksource calibration: 1995.467 MHz.
[    3.367932] Switching to clocksource tsc
[    3.428112] usb 1-1.1: device descriptor read/64, error -32
[    3.696068] usb 1-1.2: new high speed USB device number 4 using ehci_hcd
[    3.896005] usb 1-1.4: new high speed USB device number 5 using ehci_hcd
[    3.902829] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
[    4.059950] usb 2-1.2: new full speed USB device number 3 using ehci_hcd
[   13.285485] udevd[386]: starting version 173
[   13.290434] lp: driver loaded but no devices found
[   13.314394] [drm] Initialized drm 1.1.0 20060810
[   13.321764] mei: module is from the staging directory, the quality is unknown, you have been warned.
[   13.321968] wmi: Mapper loaded
[   13.322070] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   13.322077] mei 0000:00:16.0: setting latency timer to 64
[   13.331267] cfg80211: Calling CRDA to update world regulatory domain
[   13.337644] ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   13.337659] ath9k 0000:03:00.0: setting latency timer to 64
[   13.354097] MXM: GUID detected in BIOS
[   13.354170] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0x0000000000000003) is beyond end of object (20110413/exoparg2-418)
[   13.354179] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0._DSM] (Node ffff880148e47730), AE_AML_BUFFER_LIMIT (20110413/psparse-536)
[   13.354191] failed to evaluate _DSM: 12298
[   13.356913] ACPI Exception: AE_AML_BUFFER_LIMIT, Index (0x0000000000000003) is beyond end of object (20110413/exoparg2-418)
[   13.356921] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0._DSM] (Node ffff880148e47730), AE_AML_BUFFER_LIMIT (20110413/psparse-536)
[   13.356930] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEGR.GFX0._DSM] (Node ffff880148e63230), AE_AML_BUFFER_LIMIT (20110413/psparse-536)
[   13.356941] failed to evaluate _DSM: 12298
[   13.356945] VGA switcheroo: detected DSM switching method \_SB_.PCI0.PEGR.GFX0 handle
[   13.356974] nouveau 0000:01:00.0: power state changed by ACPI to D0
[   13.356979] nouveau 0000:01:00.0: power state changed by ACPI to D0
[   13.356985] nouveau 0000:01:00.0: enabling device (0000 -> 0003)
[   13.356992] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   13.356997] nouveau 0000:01:00.0: setting latency timer to 64
[   13.359336] [drm] nouveau 0000:01:00.0: Detected an NVc0 generation card (0x0c1a00a1)
[   13.362572] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   13.362577] i915 0000:00:02.0: setting latency timer to 64
[   13.365633] Bluetooth: Core ver 2.16
[   13.365648] NET: Registered protocol family 31
[   13.365650] Bluetooth: HCI device and connection manager initialized
[   13.365652] Bluetooth: HCI socket layer initialized
[   13.365654] Bluetooth: L2CAP socket layer initialized
[   13.366136] Bluetooth: SCO socket layer initialized
[   13.366408] Bluetooth: Generic Bluetooth USB driver ver 0.6
[   13.366505] type=1400 audit(1331848415.232:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=584 comm="apparmor_parser"
[   13.366523] usbcore: registered new interface driver btusb
[   13.366857] type=1400 audit(1331848415.232:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=584 comm="apparmor_parser"
[   13.367091] type=1400 audit(1331848415.232:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=584 comm="apparmor_parser"
[   13.367705] input: Microsoft Microsoft® Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input4
[   13.367812] generic-usb 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® Nano Transceiver v2.0] on usb-0000:00:1d.0-1.2/input0
[   13.369782] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[   13.379505] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[   13.379507] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM
[   13.379519] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[   13.379521] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PCIROM
[   13.381877] input: Microsoft Microsoft® Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input5
[   13.382181] generic-usb 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® Nano Transceiver v2.0] on usb-0000:00:1d.0-1.2/input1
[   13.389428] nouveau 0000:01:00.0: Invalid ROM contents
[   13.390726] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[   13.390730] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from ACPI
[   13.405945] input: Microsoft Microsoft® Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.2/input/input6
[   13.406216] generic-usb 0003:045E:0745.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® Nano Transceiver v2.0] on usb-0000:00:1d.0-1.2/input2
[   13.406236] usbcore: registered new interface driver usbhid
[   13.406239] usbhid: USB HID core driver
[   13.407775] asus_wmi: ASUS WMI generic driver loaded
[   13.410307] ath: EEPROM regdomain: 0x60
[   13.410310] ath: EEPROM indicates we should expect a direct regpair map
[   13.410314] ath: Country alpha2 being used: 00
[   13.410315] ath: Regpair used: 0x60
[   13.410320] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   13.410324] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   13.410326] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   13.410329] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   13.410331] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   13.410334] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   13.410337] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   13.410341] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   13.410344] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   13.410348] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   13.410350] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   13.410354] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   13.410357] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   13.410361] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   13.410364] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   13.410368] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   13.410370] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   13.410374] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   13.410376] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   13.410380] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   13.410383] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   13.410386] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   13.410389] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   13.410393] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   13.410396] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   13.410399] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   13.410402] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[   13.410405] cfg80211: 2474000 KHz - 2494000 KHz @  KHz), (N/A mBi, 2000 mBm)
[   13.411885] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[   13.414297] rts5139: module is from the staging directory, the quality is unknown, you have been warned.
[   13.415808] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[   13.415811] cfg80211: World regulatory domain updated:
[   13.415813] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   13.415816] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.415818] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.415821] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.415825] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.415828] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.417876] Linux video capture interface: v2.00
[   13.418455] Initializing rts5139 USB card reader driver...
[   13.418491] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (13d3:5120)
[   13.420410] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[   13.420971] Registered led device: ath9k-phy0
[   13.420980] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc900050a0000, irq=17
[   13.424872] scsi6 : SCSI emulation for RTS5139 USB card reader
[   13.425739] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input7
[   13.425939] usbcore: registered new interface driver uvcvideo
[   13.425942] USB Video Class driver (v1.1.0)
[   13.426761] scsi 6:0:0:0: Direct-Access     Generic- xD/SD/M.S.       1.00 PQ: 0 ANSI: 0 CCS
[   13.426986] usbcore: registered new interface driver rts5139
[   13.426989] Realtek rts5139 USB card reader support registered.
[   13.485610] asus_wmi: Initialization: 0x1
[   13.604033] elantech: assuming hardware version 3, firmware version 69.15.1
[   13.632709] asus_wmi: SFUN value: 0x1a0af7
[   13.634813] elantech: Synaptics capabilities query result 0x78, 0x15, 0x0c.
[   13.701503] elantech: x_max = 2508, y_max = 1320
[   13.714610] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input8
[   13.796702] sd 6:0:0:0: Attached scsi generic sg2 type 0
[   13.797843] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[   13.932832] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input9
[   14.007889] Adding 262136k swap on /host/ubuntu/disks/swap.disk.  Priority:-1 extents:1 across:262136k
[   14.322788] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro
[   14.902571] type=1400 audit(1331848416.768:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=931 comm="apparmor_parser"
[   14.902771] type=1400 audit(1331848416.768:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=932 comm="apparmor_parser"
[   14.902815] type=1400 audit(1331848416.768:7): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=937 comm="apparmor_parser"
[   14.903143] type=1400 audit(1331848416.768:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=935 comm="apparmor_parser"
[   14.903153] type=1400 audit(1331848416.768:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=932 comm="apparmor_parser"
[   14.903392] type=1400 audit(1331848416.768:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=932 comm="apparmor_parser"
[   14.903486] type=1400 audit(1331848416.768:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=935 comm="apparmor_parser"
[   15.009932] init: failsafe main process (879) killed by TERM signal
[   15.010556] init: apport pre-start process (973) terminated with status 1
[   15.015221] init: apport post-stop process (998) terminated with status 1
[   15.019780] init: alsa-restore main process (978) terminated with status 19
[   15.062692] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   15.247811] r8169 0000:04:00.0: eth0: link down
[   15.247854] r8169 0000:04:00.0: eth0: link down
[   15.248093] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.312305] Bluetooth: RFCOMM TTY layer initialized
[   15.312311] Bluetooth: RFCOMM socket layer initialized
[   15.312313] Bluetooth: RFCOMM ver 1.11
[   15.313722] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   15.313725] Bluetooth: BNEP filters: protocol multicast
[   15.710949] init: anacron main process (1003) killed by TERM signal
[   15.888319] [drm] nouveau 0000:01:00.0: ... appears to be valid
[   15.888323] [drm] nouveau 0000:01:00.0: BIT BIOS found
[   15.888326] [drm] nouveau 0000:01:00.0: Bios version 70.08.58.00
[   15.888327] [drm] nouveau 0000:01:00.0: Pointer to BIT loadval table invalid
[   15.888330] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[   15.888332] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[   15.888334] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 02010300 00000000
[   15.888336] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 0000000e 00000000
[   15.888339] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
[   15.888341] [drm] nouveau 0000:01:00.0:   0: 0x00000100: type 0x00 idx 0 tag 0xff
[   15.888355] [drm] nouveau 0000:01:00.0: Adaptor not initialised, running VBIOS init tables.
[   15.888357] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD607
[   15.888757] asus_wmi: Backlight controlled by ACPI video driver
[   15.912392] [drm] nouveau 0000:01:00.0: 0xD5B1: i2c wr fail: -6
[   15.952561] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xDC63
[   15.979409] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xEE69
[   15.979414] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEE6D
[   15.979465] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEF55
[   15.979466] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xEFBA
[   16.018056] [drm] nouveau 0000:01:00.0: 3 available performance level(s)
[   16.018060] [drm] nouveau 0000:01:00.0: 0: memory 135MHz core 50MHz shader 101MHz voltage 830mV timing 4
[   16.018063] [drm] nouveau 0000:01:00.0: 1: memory 324MHz core 202MHz shader 405MHz voltage 830mV timing 5
[   16.018065] [drm] nouveau 0000:01:00.0: 3: memory 900MHz core 672MHz shader 1344MHz voltage 980mV timing 6
[   16.018134] [TTM] Zone  kernel: Available graphics memory: 1982806 kiB.
[   16.018136] [TTM] Initializing pool allocator.
[   16.018152] [drm] nouveau 0000:01:00.0: Detected 1024MiB VRAM
[   16.024519] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[   16.024527] [drm] nouveau 0000:01:00.0: PGRAPH: unsupported chipset, please report!
[   16.033783] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   16.033785] [drm] No driver support for vblank timestamp query.
[   16.084414] [drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x8020000, bo ffff880145025800
[   16.084534] Console: switching to colour frame buffer device 128x48
[   16.084550] fb0: nouveaufb frame buffer device
[   16.084551] drm: registered panic notifier
[   16.084556] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
[   16.151583] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[   16.151588] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   16.151589] [drm] Driver supports precise vblank timestamp query.
[   16.151645] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
[   16.151680] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
[   16.151682] vga_switcheroo: enabled
[   16.151699] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[   16.151702] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   16.252776] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro,commit=600
[   16.380280] fbcon: inteldrmfb (fb1) is primary device
[   16.380284] fbcon: Remapping primary device, fb1, to tty 1-63
[   16.551147] fb1: inteldrmfb frame buffer device
[   16.551948] ACPI Warning: _BQC returned an invalid level (20110413/video-473)
[   16.552235] acpi device:51: registered as cooling_device8
[   16.552285] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:4d/LNXVIDEO:00/input/input10
[   16.552319] ACPI: Video Device [GFX0] (multi-head: yes  rom: yes  post: no)
[   16.553270] ACPI Warning: _BQC returned an invalid level (20110413/video-473)
[   16.553555] acpi device:53: registered as cooling_device9
[   16.553747] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input11
[   16.553774] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   16.553815] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 1
[   16.554027] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   16.554095] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   16.554125] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   16.777722] r8169 0000:04:00.0: eth0: link up
[   16.778047] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   17.098426] hda_codec: ALC269VB: BIOS auto-probing.
[   17.104565] HDMI status: Pin=6 Presence_Detect=0 ELD_Valid=0
[   17.104731] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   17.104890] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   17.104931] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   17.364186] ppdev: user-space parallel port driver
[   18.089238] wlan0: authenticate with 00:e0:4c:ca:24:4f (try 1)
[   18.100437] wlan0: authenticated
[   18.129067] wlan0: associate with 00:e0:4c:ca:24:4f (try 1)
[   18.138550] wlan0: RX AssocResp from 00:e0:4c:ca:24:4f (capab=0x411 status=0 aid=2)
[   18.138557] wlan0: associated
[   18.145357] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   19.506796] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro,commit=600
[   27.164328] eth0: no IPv6 routers present
[   28.775850] wlan0: no IPv6 routers present
[   38.420921] wlan0: deauthenticating from 00:e0:4c:ca:24:4f by local choice (reason=3)
[   38.595574] cfg80211: All devices are disconnected, going to restore regulatory settings
[   38.595580] cfg80211: Restoring regulatory settings
[   38.595584] cfg80211: Calling CRDA to update world regulatory domain
[   38.597762] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[   38.597764] cfg80211: World regulatory domain updated:
[   38.597766] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   38.597768] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   38.597769] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   38.597771] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   38.597773] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   38.597774] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   42.284948] wlan0: authenticate with 00:e0:4c:ca:24:4f (try 1)
[   42.287799] wlan0: authenticated
[   42.306368] wlan0: associate with 00:e0:4c:ca:24:4f (try 1)
[   42.315644] wlan0: RX ReassocResp from 00:e0:4c:ca:24:4f (capab=0x411 status=0 aid=2)
[   42.315654] wlan0: associated
[   53.368025] wlan0: no IPv6 routers present
[   60.046090] r8169 0000:04:00.0: eth0: link down
[   62.615451] wlan0: deauthenticating from 00:e0:4c:ca:24:4f by local choice (reason=3)
[   62.803785] cfg80211: All devices are disconnected, going to restore regulatory settings
[   62.803788] cfg80211: Restoring regulatory settings
[   62.803808] cfg80211: Calling CRDA to update world regulatory domain
[   62.806205] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[   62.806207] cfg80211: World regulatory domain updated:
[   62.806209] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   62.806211] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   62.806213] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   62.806215] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   62.806216] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   62.806218] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   67.008935] wlan0: authenticate with 00:e0:4c:ca:24:4f (try 1)
[   67.013162] wlan0: authenticated
[   67.031936] wlan0: associate with 00:e0:4c:ca:24:4f (try 1)
[   67.041441] wlan0: RX ReassocResp from 00:e0:4c:ca:24:4f (capab=0x411 status=0 aid=2)
[   67.041450] wlan0: associated
[   70.225529] cfg80211: All devices are disconnected, going to restore regulatory settings
[   70.225535] cfg80211: Restoring regulatory settings
[   70.225539] cfg80211: Calling CRDA to update world regulatory domain
[   70.227751] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[   70.227755] cfg80211: World regulatory domain updated:
[   70.227756] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   70.227759] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   70.227762] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   70.227765] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   70.227767] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   70.227770] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   71.323475] wlan0: authenticate with 00:e0:4c:ca:24:4f (try 1)
[   71.522282] wlan0: authenticate with 00:e0:4c:ca:24:4f (try 2)
[   71.722225] wlan0: authenticate with 00:e0:4c:ca:24:4f (try 3)
[   71.922153] wlan0: authentication with 00:e0:4c:ca:24:4f timed out
[   77.480353] wlan0: no IPv6 routers present
[   92.616566] CPU4: Package power limit notification (total events = 1)
[   92.616572] CPU0: Package power limit notification (total events = 1)
[   92.616576] CPU2: Package power limit notification (total events = 1)
[   92.616582] CPU3: Package power limit notification (total events = 1)
[   92.616586] CPU7: Package power limit notification (total events = 1)
[   92.616589] CPU6: Package power limit notification (total events = 1)
[   92.616594] CPU1: Package power limit notification (total events = 1)
[   92.616597] CPU5: Package power limit notification (total events = 1)
[   92.627570] CPU3: Package power limit normal
[   92.627574] CPU6: Package power limit normal
[   92.627577] CPU2: Package power limit normal
[   92.627580] CPU4: Package power limit normal
[   92.627583] CPU7: Package power limit normal
[   92.627586] CPU0: Package power limit normal
[   92.627597] CPU1: Package power limit normal
[   92.627600] CPU5: Package power limit normal
[  109.387702] wlan0: authenticate with 00:e0:4c:ca:24:4f (try 1)
[  109.390340] wlan0: authenticated
[  109.409060] wlan0: associate with 00:e0:4c:ca:24:4f (try 1)
[  109.427539] wlan0: RX ReassocResp from 00:e0:4c:ca:24:4f (capab=0x411 status=0 aid=2)
[  109.427550] wlan0: associated
[  120.498680] wlan0: no IPv6 routers present
[  126.799645] r8169 0000:04:00.0: eth0: link up
[  157.767295] wlan0: deauthenticating from 00:e0:4c:ca:24:4f by local choice (reason=3)
[  157.961541] cfg80211: All devices are disconnected, going to restore regulatory settings
[  157.961552] cfg80211: Restoring regulatory settings
[  157.961566] cfg80211: Calling CRDA to update world regulatory domain
[  157.969070] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[  157.969078] cfg80211: World regulatory domain updated:
[  157.969083] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  157.969091] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  157.969097] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  157.969103] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  157.969109] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  157.969114] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  299.945648] [Hardware Error]: Machine check events logged
[  657.593879] CPU0: Package power limit notification (total events = 2)
[  657.593885] CPU4: Package power limit notification (total events = 2)
[  657.593889] CPU1: Package power limit notification (total events = 2)
[  657.593893] CPU5: Package power limit notification (total events = 2)
[  657.593898] CPU3: Package power limit notification (total events = 2)
[  657.593902] CPU2: Package power limit notification (total events = 2)
[  657.593906] CPU6: Package power limit notification (total events = 2)
[  657.593910] CPU7: Package power limit notification (total events = 2)
[  657.604889] CPU4: Package power limit normal
[  657.604895] CPU3: Package power limit normal
[  657.604898] CPU0: Package power limit normal
[  657.604900] CPU7: Package power limit normal
[  657.604921] CPU1: Package power limit normal
[  657.604925] CPU5: Package power limit normal
[  657.604928] CPU2: Package power limit normal
[  657.604931] CPU6: Package power limit normal

dmesg | tail

Kod Seç Genişlet


[  657.593906] CPU6: Package power limit notification (total events = 2)
[  657.593910] CPU7: Package power limit notification (total events = 2)
[  657.604889] CPU4: Package power limit normal
[  657.604895] CPU3: Package power limit normal
[  657.604898] CPU0: Package power limit normal
[  657.604900] CPU7: Package power limit normal
[  657.604921] CPU1: Package power limit normal
[  657.604925] CPU5: Package power limit normal
[  657.604928] CPU2: Package power limit normal
[  657.604931] CPU6: Package power limit normal


kodlar bunlar

[burk]

@aurora'nın çözüm önerisi üzerine;

Kod Seç Genişlet

wget http://www.orbit-lab.org/kernel/compat-wireless-2.6-stable/v2.6.39/compat-wireless-2.6.39-1.tar.bz2
tar xfvj compat-wireless-2.6.39-1.tar.bz2

Kod Seç Genişlet

cd compat-wireless-2.6.39-1

Kod Seç Genişlet

./scripts/driver-select ath9k

Kod Seç Genişlet

make

Kod Seç Genişlet

sudo make install

Kod Seç Genişlet

sudo make unload

Kod Seç Genişlet

sudo modprobe ath9k

[if]

Paketin yeni sürümleri de çıkmış: http://www.orbit-lab.org/kernel/compat-wireless-3.0-stable/

[seckinylmz]

dediğiniz kodları yazdım bir sürü şey yükledi ama yinede aynı.

[heartsmagic]

@seckinylmz, sana yardımcı olabilmemiz için neler yaptığını, ne sonuç aldığını görmemiz gerekiyor. Aksi takdirde gözümüz kapalı ilerleyemeyiz. Bu nedenle lütfen uyguladığın adımlar da dahil olmak üzere tüm çıktıları buraya kod etiketi içinde aktar.

[burk]

@seckinylmz ayrıca bir de güncel sürümle deneme yapalım;

Kod Seç Genişlet

wget http://www.orbit-lab.org/kernel/compat-wireless-3.0-stable/v3.3/compat-wireless-3.3-rc1-2.tar.bz2
tar xfvj compat-wireless-3.3-rc1-2.tar.bz2

Kod Seç Genişlet

cd compat-wireless-3.3-rc1-2

Kod Seç Genişlet

./scripts/driver-select ath9k

Kod Seç Genişlet

make

Kod Seç Genişlet

sudo make install

Kod Seç Genişlet

sudo make unload

Kod Seç Genişlet

sudo modprobe ath9k 

[seckinylmz]

Teşekkürler şimdi oldu ilgin için teşekkür ederim tekrar

[if]

@seckinylmz, çözüldü ise sorun sizi bu¹ başlığa alalım:)

1 http://forum.ubuntu-tr.net/index.php?topic=2917.0

[seckinylmz]

Dün çözülmüştü fakat 104 mb lık bir güncelleme paketi geldi onu güncellediğimde  yenidne wireless sorunu ortaya çıktı aynı kodları yenden girsem düzelirmi?

[if]

@seckinylmz, çözümü denemeden önce

Kod Seç Genişlet

rfkill list
iwconfig
iwlist scanning
dmesg | grep ath9k
çıktılarına bakabilir miyim? Çekirdek güncellemesi mi geldi?

[burk]

@seckinylmz ayrıca grub ekranından bir önceki sürüm çekirdeği seçerek de deneme yapabilirsiniz.

[seckinylmz]

rfkill list

Kod Seç Genişlet

0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
1: asus-wlan: Wireless LAN
Soft blocked: no
Hard blocked: no
2: asus-bluetooth: Bluetooth
Soft blocked: yes
Hard blocked: no
3: hci0: Bluetooth
Soft blocked: yes
Hard blocked: no

iwconfig

Kod Seç Genişlet

lo        no wireless extensions.

eth0      no wireless extensions.

wlan0     IEEE 802.11bgn  ESSID:off/any 
          Mode:Managed  Access Point: Not-Associated   Tx-Power=15 dBm   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Power Management:on

iwlist scanning

Kod Seç Genişlet

lo        Interface doesn't support scanning.

eth0      Interface doesn't support scanning.

wlan0     No scan results


dmesg | grep ath9k

Kod Seç Genişlet

[   20.059535] ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   20.059550] ath9k 0000:03:00.0: setting latency timer to 64
[   20.132041] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[   20.132443] Registered led device: ath9k-phy0


[if]

@seckinylmz, yeniden derleme yapınız.

[seckinylmz]

derleme yapınız derken güncellememi yapayım ?

[burk]

derleme yapınız derken güncellememi yapayım ?

Hayır size verdiğim yükleme yönergesini tekrar yapın.

[seckinylmz]

Tekrar çözüldü wireless sorunum teşekkürler.

[burk]

Rica ederiz @seckinylmz, sorun yaşarsanız bu derleme işlemini tekrar deneyin, konuyu kilitliyorum.