Lenovo b 570e atheros 9285 kablosuz kartı sorunu

[emrahtr]

Merhaba forumdaki bu kartla ilgili bütün sorunları araştırdım fakat bi çözüm bulamadım konu açmadan önce yapılması gereken çıktılarımı aşagıya yapıştırdım.

Kod Seç Genişlet

code: cat /etc/lsb-release

DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=11.10
DISTRIB_CODENAME=oneiric
DISTRIB_DESCRIPTION="Ubuntu 11.10"

Kod Seç Genişlet

code: uname -a
Linux lenovo-Lenovo-B570e 3.0.0-16-generic-pae #28-Ubuntu SMP Fri Jan 27 19:24:01 UTC 2012 i686 i686 i386 GNU/Linux

Kod Seç Genişlet

code: lspci

00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5)
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5)
00:1d.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)

Kod Seç Genişlet

code: lsusb

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 15d9:0a4c Trust International B.V. USB+PS/2 Optical Mouse
Bus 001 Device 004: ID 04f2:b272 Chicony Electronics Co., Ltd
Bus 002 Device 003: ID 0bda:0139 Realtek Semiconductor Corp.

Kod Seç Genişlet

code: rfkill list

0: ideapad_wlan: Wireless LAN
Soft blocked: no
Hard blocked: no
1: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no

Kod Seç Genişlet

code: sudo lshw -C network

*-network               
       description: Wireless interface
       product: AR9285 Wireless Network Adapter (PCI-Express)
       vendor: Atheros Communications Inc.
       physical id: 0
       bus info: pci@0000:02:00.0
       logical name: wlan0
       version: 01
       serial: 74:de:2b:e5:c6:c5
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
       configuration: broadcast=yes driver=ath9k driverversion=3.0.0-16-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn
       resources: irq:17 memory:d0500000-d050ffff
  *-network
       description: Ethernet interface
       product: RTL8111/8168B PCI Express Gigabit Ethernet controller
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:03:00.0
       logical name: eth0
       version: 06
       serial: f0:de:f1:ab:df:ca
       size: 100Mbit/s
       capacity: 1Gbit/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168e-2.fw ip=192.168.2.199 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s
       resources: irq:41 ioport:2000(size=256) memory:d0404000-d0404fff memory:d0400000-d0403fff

Kod Seç Genişlet

code: ifconfig

eth0      Link encap:Ethernet  HWaddr f0:de:f1:ab:df:ca 
          inet addr:192.168.2.199  Bcast:192.168.2.255  Mask:255.255.255.0
          inet6 addr: fe80::f2de:f1ff:feab:dfca/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:3463 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2593 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:2654910 (2.6 MB)  TX bytes:517304 (517.3 KB)
          Interrupt:41 Base address:0xc000

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Sunucu
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:64 errors:0 dropped:0 overruns:0 frame:0
          TX packets:64 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:4960 (4.9 KB)  TX bytes:4960 (4.9 KB)

wlan0     Link encap:Ethernet  HWaddr 74:de:2b:e5:c6:c5 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

Kod Seç Genişlet

code: iwconfig

lo        no wireless extensions.

eth0      no wireless extensions.

wlan0     IEEE 802.11bgn  ESSID:off/any 
          Mode:Managed  Access Point: Not-Associated   Tx-Power=14 dBm   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Power Management:off

Kod Seç Genişlet

code: iwlist scanning
lo        Interface doesn't support scanning.

eth0      Interface doesn't support scanning.

wlan0     No scan results

Kod Seç Genişlet

code: lsmod

Module                  Size  Used by
nls_iso8859_1          12617  0
nls_cp437              12751  0
vfat                   17308  0
fat                    55577  1 vfat
usb_storage            44173  0
uas                    17699  0
rfcomm                 38408  0
bnep                   17923  2
bluetooth             148839  10 rfcomm,bnep
parport_pc             32114  0
ppdev                  12849  0
snd_hda_codec_hdmi     31426  1
snd_hda_codec_realtek   254125  1
snd_hda_intel          28358  2
snd_hda_codec          91859  3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel
binfmt_misc            17292  1
snd_hwdep              13276  1 snd_hda_codec
snd_pcm                80435  3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
snd_seq_midi           13132  0
rts5139               279517  0
snd_rawmidi            25241  1 snd_seq_midi
snd_seq_midi_event     14475  1 snd_seq_midi
arc4                   12473  2
uvcvideo               67271  0
snd_seq                51567  2 snd_seq_midi,snd_seq_midi_event
videodev               85626  1 uvcvideo
ath9k                 112612  0
snd_timer              28932  2 snd_pcm,snd_seq
snd_seq_device         14172  3 snd_seq_midi,snd_rawmidi,snd_seq
joydev                 17393  0
snd                    55902  14 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
mac80211              393421  1 ath9k
i915                  509554  3
soundcore              12600  1 snd
ath9k_common           13599  1 ath9k
ath9k_hw              293933  2 ath9k,ath9k_common
ath                    19387  2 ath9k,ath9k_hw
ideapad_laptop         13575  0
sparse_keymap          13658  1 ideapad_laptop
cfg80211              172427  3 ath9k,mac80211,ath
drm_kms_helper         32889  1 i915
drm                   196290  4 i915,drm_kms_helper
i2c_algo_bit           13199  1 i915
video                  18908  1 i915
snd_page_alloc         14108  2 snd_hda_intel,snd_pcm
mei                    36466  0
psmouse                63474  0
serio_raw              12990  0
wmi                    18744  0
lp                     17455  0
parport                40930  3 parport_pc,ppdev,lp
usbhid                 41905  0
hid                    77367  1 usbhid
r8169                  47200  0
ahci                   21634  2
libahci                25761  1 ahci

Kod Seç Genişlet

code: dmesg

[    2.101403] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.105345] ata5.00: ATAPI: TSSTcorp CDDVDW SN-208AB, LA01, max UDMA/100
[    2.115370] ata5.00: configured for UDMA/100
[    2.127994] scsi 4:0:0:0: CD-ROM            TSSTcorp CDDVDW SN-208AB  LA01 PQ: 0 ANSI: 5
[    2.143194] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.143205] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.143364] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    2.143430] sr 4:0:0:0: Attached scsi generic sg1 type 5
[    2.460863] ata6: SATA link down (SStatus 0 SControl 300)
[    2.464117] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4
[    2.464225] generic-usb 0003:15D9:0A4C.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1a.0-1.2/input0
[    2.464243] usbcore: registered new interface driver usbhid
[    2.464245] usbhid: USB HID core driver
[    2.771179] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    5.144416] udevd[348]: starting version 173
[    5.149187] Adding 6201052k swap on /dev/sda5.  Priority:-1 extents:1 across:6201052k
[    5.992644] lp: driver loaded but no devices found
[    6.511989] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    6.960174] wmi: Mapper loaded
[    7.085834] mei: module is from the staging directory, the quality is unknown, you have been warned.
[    7.086137] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    7.086145] mei 0000:00:16.0: setting latency timer to 64
[    7.219664] [drm] Initialized drm 1.1.0 20060810
[    7.278710] cfg80211: Calling CRDA to update world regulatory domain
[    7.326406] input: Ideapad extra buttons as /devices/platform/ideapad/input/input5
[    7.636955] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    7.636961] i915 0000:00:02.0: setting latency timer to 64
[    7.650809] i915 0000:00:02.0: irq 42 for MSI/MSI-X
[    7.650815] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    7.650816] [drm] Driver supports precise vblank timestamp query.
[    7.650854] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    7.735832] Synaptics Touchpad, model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400
[    7.767605] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[    7.893570] fbcon: inteldrmfb (fb0) is primary device
[    7.893645] Console: switching to colour frame buffer device 170x48
[    7.893678] fb0: inteldrmfb frame buffer device
[    7.893679] drm: registered panic notifier
[    7.916424] ACPI Warning: _BQC returned an invalid level (20110413/video-473)
[    7.916452] acpi device:3f: registered as cooling_device2
[    7.916860] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input7
[    7.916908] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    7.916943] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    8.363942] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    8.363962] ath9k 0000:02:00.0: setting latency timer to 64
[    8.417220] ath: EEPROM regdomain: 0x65
[    8.417222] ath: EEPROM indicates we should expect a direct regpair map
[    8.417225] ath: Country alpha2 being used: 00
[    8.417227] ath: Regpair used: 0x65
[    8.417229] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[    8.417232] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[    8.417234] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[    8.417236] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[    8.417238] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[    8.417240] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[    8.417242] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[    8.417244] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[    8.417246] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[    8.417248] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[    8.417250] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[    8.417252] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[    8.417254] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[    8.417257] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[    8.417259] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[    8.417261] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[    8.417263] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[    8.417265] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[    8.417267] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[    8.417269] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[    8.417271] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[    8.417273] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
[    8.417275] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[    8.417277] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[    8.417279] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[    8.417282] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
[    8.417284] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    8.418735] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[    8.547919] Linux video capture interface: v2.00
[    8.680760] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[    8.680764] cfg80211: World regulatory domain updated:
[    8.680766] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    8.680769] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.680771] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    8.680774] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    8.680776] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.680778] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.746145] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (04f2:b272)
[    8.748022] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input8
[    8.748080] usbcore: registered new interface driver uvcvideo
[    8.748082] USB Video Class driver (v1.1.0)
[    8.832422] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[    8.832971] Registered led device: ath9k-phy0
[    8.832979] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8a80000, irq=17
[    9.162250] rts5139: module is from the staging directory, the quality is unknown, you have been warned.
[    9.163103] Initializing rts5139 USB card reader driver...
[    9.166765] scsi6 : SCSI emulation for RTS5139 USB card reader
[    9.166978] usbcore: registered new interface driver rts5139
[    9.166981] Realtek rts5139 USB card reader support registered.
[    9.167165] scsi 6:0:0:0: Direct-Access     Generic- xD/SD/M.S.       1.00 PQ: 0 ANSI: 0 CCS
[    9.231099] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    9.232661] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    9.742422] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    9.742489] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[    9.742516] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    9.890420] type=1400 audit(1330155279.410:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=790 comm="apparmor_parser"
[    9.890477] type=1400 audit(1330155279.410:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=739 comm="apparmor_parser"
[    9.890822] type=1400 audit(1330155279.410:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=790 comm="apparmor_parser"
[    9.890881] type=1400 audit(1330155279.410:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=739 comm="apparmor_parser"
[    9.891077] type=1400 audit(1330155279.410:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=790 comm="apparmor_parser"
[    9.891139] type=1400 audit(1330155279.410:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=739 comm="apparmor_parser"
[    9.891717] type=1400 audit(1330155279.410:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=738 comm="apparmor_parser"
[    9.892120] type=1400 audit(1330155279.410:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=738 comm="apparmor_parser"
[    9.892380] type=1400 audit(1330155279.410:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=738 comm="apparmor_parser"
[   10.423762] hda_codec: ALC272: BIOS auto-probing.
[   10.802277] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
[   10.802434] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   10.802595] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   10.802654] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   12.343094] init: failsafe main process (839) killed by TERM signal
[   14.050919] ppdev: user-space parallel port driver
[   14.250985] type=1400 audit(1330155283.778:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=970 comm="apparmor_parser"
[   15.117728] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   15.147469] audit_printk_skb: 30 callbacks suppressed
[   15.147472] type=1400 audit(1330155284.678:22): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=978 comm="apparmor_parser"
[   15.147884] type=1400 audit(1330155284.678:23): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=978 comm="apparmor_parser"
[   15.163021] type=1400 audit(1330155284.690:24): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=985 comm="apparmor_parser"
[   15.349641] r8169 0000:03:00.0: eth0: link down
[   15.349656] r8169 0000:03:00.0: eth0: link down
[   15.349827] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   16.047589] init: apport pre-start process (1023) terminated with status 1
[   16.060348] init: apport post-stop process (1045) terminated with status 1
[   16.941433] r8169 0000:03:00.0: eth0: link up
[   16.941624] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   20.196135] Bluetooth: Core ver 2.16
[   20.196157] NET: Registered protocol family 31
[   20.196159] Bluetooth: HCI device and connection manager initialized
[   20.196161] Bluetooth: HCI socket layer initialized
[   20.196162] Bluetooth: L2CAP socket layer initialized
[   20.196936] Bluetooth: SCO socket layer initialized
[   20.351936] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   20.351939] Bluetooth: BNEP filters: protocol multicast
[   20.353610] Bluetooth: RFCOMM TTY layer initialized
[   20.353614] Bluetooth: RFCOMM socket layer initialized
[   20.353616] Bluetooth: RFCOMM ver 1.11
[   23.132169] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[   24.092801] init: plymouth-stop pre-start process (1399) terminated with status 1
[   27.395656] eth0: no IPv6 routers present
[   27.989456] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[   64.466863] r8169 0000:03:00.0: eth0: link down
[   67.479053] r8169 0000:03:00.0: eth0: link down
[   67.479225] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   68.651519] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   68.837636] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   69.025532] r8169 0000:03:00.0: eth0: link down
[   69.025821] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  219.117464] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  230.690371] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  230.829521] r8169 0000:03:00.0: eth0: link down
[  230.829923] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  305.261323] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  405.725594] r8169 0000:03:00.0: eth0: link up
[  405.725922] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  410.663883] usb 2-1.2: new high speed USB device number 4 using ehci_hcd
[  410.862397] usbcore: registered new interface driver uas
[  410.875940] Initializing USB Mass Storage driver...
[  410.876681] scsi7 : usb-storage 2-1.2:1.0
[  410.876840] usbcore: registered new interface driver usb-storage
[  410.876843] USB Mass Storage support registered.
[  411.910526] scsi 7:0:0:0: Direct-Access     Kingston DataTraveler G3  PMAP PQ: 0 ANSI: 0 CCS
[  411.946993] sd 7:0:0:0: Attached scsi generic sg3 type 0
[  413.128380] sd 7:0:0:0: [sdc] 15622144 512-byte logical blocks: (7.99 GB/7.44 GiB)
[  413.128939] sd 7:0:0:0: [sdc] Write Protect is off
[  413.128946] sd 7:0:0:0: [sdc] Mode Sense: 23 00 00 00
[  413.129469] sd 7:0:0:0: [sdc] No Caching mode page present
[  413.129476] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[  413.132805] sd 7:0:0:0: [sdc] No Caching mode page present
[  413.132813] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[  413.160050]  sdc: sdc1
[  413.163016] sd 7:0:0:0: [sdc] No Caching mode page present
[  413.163026] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[  413.163033] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[  415.938510] eth0: no IPv6 routers present
[  483.179790] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  493.614428] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  910.879257] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[  911.392781] r8169 0000:03:00.0: eth0: link down
[  911.392808] r8169 0000:03:00.0: eth0: link down
[  911.393566] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  911.453552] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  912.963363] r8169 0000:03:00.0: eth0: link up
[  912.963671] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  913.590970] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  914.026136] r8169 0000:03:00.0: eth0: link down
[  914.026185] r8169 0000:03:00.0: eth0: link down
[  914.026570] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  914.227219] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  914.517653] r8169 0000:03:00.0: eth0: link down
[  914.517827] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  915.805857] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  915.967944] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  916.130364] r8169 0000:03:00.0: eth0: link up
[  916.131528] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  916.315873] r8169 0000:03:00.0: eth0: link down
[  916.315907] r8169 0000:03:00.0: eth0: link down
[  916.316054] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  916.558899] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  916.559058] type=1400 audit(1330156186.986:25): apparmor="DENIED" operation="open" parent=3042 profile="/sbin/dhclient" name="/var/lib/wicd/dhclient.conf" pid=3188 comm="dhclient" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[  916.959243] r8169 0000:03:00.0: eth0: link down
[  916.959638] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  917.322777] PM: Syncing filesystems ... done.
[  917.324307] PM: Preparing system for mem sleep
[  917.470955] Freezing user space processes ... (elapsed 0.01 seconds) done.
[  917.486737] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[  917.502721] PM: Entering mem sleep
[  917.502804] Suspending console(s) (use no_console_suspend to debug)
[  917.503235] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  917.503354] sd 0:0:0:0: [sda] Stopping disk
[  917.558637] ehci_hcd 0000:00:1d.0: PCI INT A disabled
[  917.558667] ehci_hcd 0000:00:1a.0: PCI INT A disabled
[  917.954639] HDA Intel 0000:00:1b.0: PCI INT A disabled
[  917.970213] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 426.420 msecs
[  918.139823] PM: suspend of drv:sd dev:0:0:0:0 complete after 637.214 msecs
[  918.139936] PM: suspend of drv:scsi dev:target0:0:0 complete after 637.303 msecs
[  918.139977] PM: suspend of drv:scsi dev:host0 complete after 637.165 msecs
[  918.162027] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 618.453 msecs
[  918.162140] PM: suspend of drv: dev:pci0000:00 complete after 618.396 msecs
[  918.162147] PM: suspend of devices complete after 659.773 msecs
[  918.162150] PM: suspend devices took 0.660 seconds
[  918.162501] r8169 0000:03:00.0: PME# enabled
[  918.162509] r8169 0000:03:00.0: wake-up capability enabled by ACPI
[  918.242017] PM: late suspend of devices complete after 79.938 msecs
[  918.242473] ACPI: Preparing to enter system sleep state S3
[  918.306292] PM: Saving platform NVS memory
[  918.307267] Disabling non-boot CPUs ...
[  918.307769] Broke affinity for irq 1
[  918.409769] CPU 1 is now offline
[  918.410127] Extended CMOS year: 2000
[  918.410380] ACPI: Low-level resume complete
[  918.410421] PM: Restoring platform NVS memory
[  918.411111] Extended CMOS year: 2000
[  918.411133] Enabling non-boot CPUs ...
[  918.411236] Booting Node 0 Processor 1 APIC 0x2
[  918.411238] smpboot cpu 1: start_ip = 99000
[  918.421424] Initializing CPU#1
[  918.498643] Disabled fast string operations
[  918.519351] CPU1 is up
[  918.520649] ACPI: Waking up from system sleep state S3
[  918.522636] Switched to NOHz mode on CPU #1
[  918.698739] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[  918.698750] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
[  918.698773] mei 0000:00:16.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[  918.698788] mei 0000:00:16.0: restoring config space at offset 0x4 (was 0xfed0a004, writing 0xd0605004)
[  918.698816] ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[  918.698833] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x4 (was 0x0, writing 0xd060a000)
[  918.698841] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
[  918.698871] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[  918.698886] HDA Intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0x4, writing 0xd0600004)
[  918.698891] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[  918.698897] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)
[  918.698927] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[  918.698937] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[  918.698942] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
[  918.698947] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x200000f0)
[  918.698956] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[  918.698962] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100004)
[  918.698997] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x20a)
[  918.699008] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[  918.699013] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xd050d050)
[  918.699018] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0xf0)
[  918.699026] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[  918.699032] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[  918.699067] pcieport 0000:00:1c.3: restoring config space at offset 0xf (was 0x400, writing 0x40b)
[  918.699078] pcieport 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0xd041d041)
[  918.699083] pcieport 0000:00:1c.3: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
[  918.699088] pcieport 0000:00:1c.3: restoring config space at offset 0x7 (was 0x0, writing 0x2020)
[  918.699096] pcieport 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[  918.699102] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[  918.699134] ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[  918.699151] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x4 (was 0x0, writing 0xd0609000)
[  918.699158] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
[  918.699234] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[  918.699332] ath9k 0000:02:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10a)
[  918.699373] ath9k 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xd0500004)
[  918.699384] ath9k 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[  918.699398] ath9k 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)
[  918.699549] r8169 0000:03:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b)
[  918.699604] r8169 0000:03:00.0: restoring config space at offset 0x8 (was 0xc, writing 0xd040000c)
[  918.699627] r8169 0000:03:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xd040400c)
[  918.699649] r8169 0000:03:00.0: restoring config space at offset 0x4 (was 0x1, writing 0x2001)
[  918.699665] r8169 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[  918.699688] r8169 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[  918.699942] PM: early resume of devices complete after 1.253 msecs
[  918.700024] i915 0000:00:02.0: setting latency timer to 64
[  918.700242] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[  918.700248] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[  918.700276] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[  918.700283] HDA Intel 0000:00:1b.0: setting latency timer to 64
[  918.700321] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[  918.700358] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[  918.700364] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[  918.700392] ahci 0000:00:1f.2: setting latency timer to 64
[  918.707465] r8169 0000:03:00.0: wake-up capability disabled by ACPI
[  918.707481] r8169 0000:03:00.0: PME# disabled
[  918.822413] PM: resume of drv:thermal dev:LNXTHERM:00 complete after 122.366 msecs
[  918.823424] Extended CMOS year: 2000
[  918.824015] PM: resume of drv:ahci dev:0000:00:1f.2 complete after 123.753 msecs
[  918.824210] sd 0:0:0:0: [sda] Starting disk
[  918.831557] PM: resume of drv:ath9k dev:0000:02:00.0 complete after 131.250 msecs
[  918.839478] PM: resume of drv:r8169 dev:0000:03:00.0 complete after 132.145 msecs
[  918.857420] r8169 0000:03:00.0: eth0: link down
[  919.002316] PM: resume of drv: dev:ep_00 complete after 178.212 msecs
[  919.002321] PM: resume of drv:hub dev:2-1:1.0 complete after 178.240 msecs
[  919.002333] PM: resume of drv: dev:ep_00 complete after 178.313 msecs
[  919.002337] PM: resume of drv:hub dev:1-1:1.0 complete after 178.338 msecs
[  919.002369] PM: resume of drv: dev:ep_81 complete after 178.357 msecs
[  919.002375] PM: resume of drv: dev:ep_81 complete after 178.284 msecs
[  919.050699] PM: resume of drv: dev:ep_00 complete after 226.344 msecs
[  919.050705] PM: resume of drv:usb-storage dev:2-1.2:1.0 complete after 226.409 msecs
[  919.050744] PM: resume of drv:scsi dev:host7 complete after 226.403 msecs
[  919.050753] PM: resume of drv: dev:ep_02 complete after 226.435 msecs
[  919.050756] PM: resume of drv: dev:ep_81 complete after 226.451 msecs
[  919.050783] PM: resume of drv:scsi dev:target7:0:0 complete after 226.421 msecs
[  919.050790] PM: resume of drv:scsi_host dev:host7 complete after 226.441 msecs
[  919.050818] PM: resume of drv:sd dev:7:0:0:0 complete after 226.446 msecs
[  919.050841] PM: resume of drv:scsi_device dev:7:0:0:0 complete after 226.458 msecs
[  919.050885] PM: resume of drv: dev:ep_00 complete after 226.784 msecs
[  919.050892] PM: resume of drv:usbhid dev:1-1.2:1.0 complete after 226.816 msecs
[  919.050929] PM: resume of drv: dev:ep_81 complete after 226.840 msecs
[  919.056998] PM: resume of drv:i915 dev:0000:00:02.0 complete after 357.331 msecs
[  919.074326] usb 2-1.6: reset high speed USB device number 3 using ehci_hcd
[  919.150067] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  919.158034] ata4: SATA link down (SStatus 0 SControl 300)
[  919.159757] ata5.00: configured for UDMA/100
[  919.166031] ata6: SATA link down (SStatus 0 SControl 300)
[  919.170642] PM: resume of drv: dev:ep_00 complete after 346.537 msecs
[  919.170648] PM: resume of drv:rts5139 dev:2-1.6:1.0 complete after 346.588 msecs
[  919.170659] PM: resume of drv: dev:ep_82 complete after 346.576 msecs
[  919.170662] PM: resume of drv: dev:ep_83 complete after 346.570 msecs
[  919.170666] PM: resume of drv: dev:ep_01 complete after 346.594 msecs
[  919.170668] PM: resume of drv:scsi dev:host6 complete after 346.554 msecs
[  919.170675] PM: resume of drv:scsi dev:target6:0:0 complete after 346.539 msecs
[  919.170678] PM: resume of drv:scsi_host dev:host6 complete after 346.553 msecs
[  919.170683] PM: resume of drv:sd dev:6:0:0:0 complete after 346.538 msecs
[  919.170692] PM: resume of drv:scsi_device dev:6:0:0:0 complete after 346.535 msecs
[  919.238040] usb 1-1.5: reset high speed USB device number 4 using ehci_hcd
[  919.339666] PM: resume of drv: dev:ep_00 complete after 515.798 msecs
[  919.339673] PM: resume of drv:uvcvideo dev:1-1.5:1.1 complete after 515.816 msecs
[  919.339676] PM: resume of drv:uvcvideo dev:1-1.5:1.0 complete after 515.842 msecs
[  919.339714] PM: resume of drv: dev:ep_81 complete after 515.867 msecs
[  919.869328] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  919.871181] ata1.00: configured for UDMA/100
[  919.908799] PM: resume of drv:sd dev:0:0:0:0 complete after 1085.656 msecs
[  919.908906] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 1070.445 msecs
[  919.912396] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 1089.236 msecs
[  919.912445] PM: resume of devices complete after 1213.674 msecs
[  919.912520] PM: resume devices took 1.212 seconds
[  919.912547] PM: Finishing wakeup.
[  919.912548] Restarting tasks ... done.
[  919.922664] video LNXVIDEO:01: Restoring backlight state
[  919.935693] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[  920.380876] r8169 0000:03:00.0: eth0: link up
[  920.381187] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  922.205849] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  922.309652] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  922.626624] r8169 0000:03:00.0: eth0: link down
[  922.626644] r8169 0000:03:00.0: eth0: link down
[  922.626916] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  923.325834] r8169 0000:03:00.0: eth0: link down
[  923.326215] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  923.369263] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[  925.012937] r8169 0000:03:00.0: eth0: link up
[  925.013263] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  925.343089] type=1400 audit(1330156200.774:26): apparmor="DENIED" operation="open" parent=3789 profile="/sbin/dhclient" name="/var/lib/wicd/dhclient.conf" pid=3838 comm="dhclient" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[  935.933794] eth0: no IPv6 routers present
[ 1530.262919] usb 2-1.2: USB disconnect, device number

Kod Seç Genişlet

code: dmesg | tail

[  922.626644] r8169 0000:03:00.0: eth0: link down
[  922.626916] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  923.325834] r8169 0000:03:00.0: eth0: link down
[  923.326215] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  923.369263] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[  925.012937] r8169 0000:03:00.0: eth0: link up
[  925.013263] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  925.343089] type=1400 audit(1330156200.774:26): apparmor="DENIED" operation="open" parent=3789 profile="/sbin/dhclient" name="/var/lib/wicd/dhclient.conf" pid=3838 comm="dhclient" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[  935.933794] eth0: no IPv6 routers present
[ 1530.262919] usb 2-1.2: USB disconnect, device number 4


[heartsmagic]

Foruma hoş geldin. Çıktıları kod etiketi içinde verirsen daha rahat okunurlar.

Araştırma yaptığını söylemişsin fakat senin kartınla forumda arama yaptığımda karşıma çıkan ikinci başlık şu:
http://forum.ubuntu-tr.net/index.php?topic=32096.0

Kartın birebir aynı o kullanıcıyla. Ubuntu sürümleri de aynı, fakat olay biraz değişik. O arkadaş ağları görebiliyor fakat bağlanamıyormuş, sorunu da çözmüş. Sende ise taramada ağlar görünmüyor. Çevrede ağ var mı, yakında mısın?

[emrahtr]

ağları göremiyorum fakat  modemin yanına geldiğimde yaklaşık 10 m  görüyorum bağlanıyorum ama önceden aynı bulunduğum yerden aynı makinada   windowsta görüp bağlanabiliyorum. üstelik full çekmiyo ama bi diş eksik çekiyo.çevremde çok ağ var  modemde  airties 5340.verdiğin link teki parametreyi de yaptım yine olmadı.Bu arada  hoşbulduk  code etiketi demişsin yeniyim bilmiyorum o yüzden yapamadım.ilgilendiğiniz için teşekkür ederim.sorun devam ediyo hala.

[heartsmagic]

Kısacası değişikliği yaptın, modemin yakınına gittin fakat yine de bağlanamadın? Modem için bir de şuradaki değişikliği dener misin?
http://forum.ubuntu-tr.net/index.php?topic=29559.msg355359#msg355359

Gerçi modemle alakasının olduğunu pek düşünmüyorum ama deneyelim yine de.

[emrahtr]

yok modemin yakınına gittiğimde bağlanıyorum fakat ofisten bağlanamıyorum windowsla bağlanıyorum ama .makina işyerinde pazartesi günü deneyeceğim.

[heartsmagic]

Bu durumda demek ki sinyal zayıflığı var. Sorun sürücü müdür, başka bir şey midir bilemiyorum ama. Sana önerdiğim çözüm yolu hiç bağlanamama durumu için geçerli normalde.

[emrahtr]

aslında başka ağ kartında sıkıntı yok asus laptop vardı o bağlanıyor .bence bu ar9285 de sıkıntı var.wicd de kurdum yine aynı neyse pazartesi yine yazarım gelişmeleri

[if]

@emrahtr, http://forum.ubuntu-tr.net/index.php?topic=32243.msg386147#msg386147 iletisindeki gibi dns değiştirip dener misiniz?