[Çözüldü]Fare ve İnternet Problemi

Başlatan canavaroski90, 03 Mart 2012 - 11:47:44

« önceki - sonraki »

0 Üyeler ve 2 Ziyaretçi konuyu incelemekte.

Yazdır
Aşağı git Sayfa1
Kullanıcı Eylemleri

canavaroski90

03 Mart 2012 - 11:47:44 Son düzenlenme: 10 Mart 2012 - 21:24:03 canavaroski90
Herkese merhabalar. Daha önce de bu konuyla alakalı bir başlık açmıştım. Ancak birden çok problem vardı ve konu çok genişti. Şimdi biraz daha detaylı olarak farkettiğim sorunlardan bahsetmek istiyorum.

İnternet windows 7 de normal hızında. Speedtest yaptırdığım zaman rahatça 5-10 Mbit görebiliyorum. Gel gelelim Ubuntu 12.04'te speedtest sayfası bile açılmıyor. Şu an Ubuntu 12.04'teyim ve foruma bile 3-5 kez yeniledikten sonra girebiliyorum. Sayfayı bile bulamıyor çoğu zaman. (Ubuntu 11.04'te ya da 11.10 'da da yaşamıştım bu problemi)

Ayrıca fare sorunum tekrarlandı. Nedir fare sorunum? USB bağlı A4tech kablosuz fare kullanıyorum (farklı farelerle de denedim), fare ara ara takılıyor. Normalde bir performans sorunu yaşarsanız, fare oynar ancak size geç cevap verir. Bende ise örneğin fare masaüstünde en altta, en üste getirirken ortada takılıyor kalıyor, 2-3 saniye sonra tekrar hareket ettirebiliyorum. Yani performanssızlıktan değil, ama anlamadım olayı net. (Bu sorunu Ubuntu 11.04'te, 11.10'da ve Kubuntu da da yaşamıştım. Hem 32 bit hem 64 bit versiyonlarında)

Ancak gözüme * bir şey çarptı, çok ilginçtir ki, internet ile işim olduğunda fare sapıtıyor. İnternette işim yokken uzun uzun denedim, hiçbir sıkıntısı yok farenin. Mükemmel çalışıyor. Ancak internetle işim olduğunda (bir internet sayfası açtığımda, güncelleme yapmaya çalıştığımda, yani bilgisayar internetten veri alışverişine girdiğinde) farem sapıtıyor. Yukarıda bahsettiğim problem ortaya çıkıyor. Mesela şu an güncelleme yapıyorum, fare sürekli takılıyor.

*** Dizüstümün touchpadi her zaman çalışıyor. Touchpad farede hiç bir sıkıntım yok. Sorun USB farelerde ortaya çıkıyor.

OS : Ubuntu 12.04 32-Bit
Donanımım
Packardbell TJ75
İntel Core-i5 2.20 Ghz
4 GB DDR3 1333 Mhz Ram
500 GB 7200 RPM Western Digital HDD
Ati Radeon HD5650 1 GB Ekran Kartı

if

#1
03 Mart 2012 - 12:01:42
@canavaroski90, gerekli çıktıları alalım: http://forum.ubuntu-tr.net/index.php?topic=28764.0

canavaroski90

#2
04 Mart 2012 - 11:56:02
Direk çıktıları kopyala yapıştır mı yapayım? Yoksa bir metin belgesine falan mı kopyalayayım?

if

#3
04 Mart 2012 - 11:57:41
@canavaroski90, buraya kopyala yapıştır yapacaksınız fakat code etiketi içerisinde. code etiketini nasıl kullanacağım derseniz imzamdaki ilk bağlantıyı takip edin:)

canavaroski90

#4
09 Mart 2012 - 14:00:29
Alıntı yapılan: if - 04 Mart 2012 - 11:57:41
@canavaroski90, buraya kopyala yapıştır yapacaksınız fakat code etiketi içerisinde. code etiketini nasıl kullanacağım derseniz imzamdaki ilk bağlantıyı takip edin:)

Teşekkürler cevabınız için, kod şeklinde eklemeyi biliyorum ancak belirtmek istediğim şuydu; bahsettiğiniz linkteki çıktıları biraz aldım, feci uzun çıktılar. Konuda kalabalık yapmaması açısında note defteri gibi bir şeye kopyalayım mı diyer sormuştum. Eğer herhangi bir kalabalık yapmaz, direk kopyala derseniz, kopyalayayım buraya :)

heartsmagic

#5
09 Mart 2012 - 20:34:49
Buraya ekle ve kod etiketini kullan lütfen:
http://forum.ubuntu-tr.net/index.php?topic=14283.0
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?

Böylece yalan, dünyanın düzenine dönüştürülüyor.

canavaroski90

#6
09 Mart 2012 - 22:24:31 Son düzenlenme: 10 Mart 2012 - 10:42:52 canavaroski90
Kod Seç
wsw@wsw-ubnt:~$ cat /etc/lsb-release
Kod Seç
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=12.04
DISTRIB_CODENAME=precise
DISTRIB_DESCRIPTION="Ubuntu precise (development branch)"

Kod Seç
wsw@wsw-ubnt:~$ uname -a
Kod Seç
Linux wsw-ubnt 3.2.0-17-generic-pae #27-Ubuntu SMP Fri Feb 24 15:59:25 UTC 2012 i686 i686 i386 GNU/Linux

Kod Seç
wsw@wsw-ubnt:~$ lspci
Kod Seç
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 12)
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 12)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
02:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Madison [Radeon HD 5000M Series]
02:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Redwood HDMI Audio [Radeon HD 5000 Series]
03:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe (rev 01)
05:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01)
ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)

Kod Seç
wsw@wsw-ubnt:~$ lsusb
Kod Seç
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 003: ID 09da:054f A4 Tech Co., Ltd
Bus 002 Device 004: ID 04f2:b044 Chicony Electronics Co., Ltd Acer CrystalEye Webcam
Bus 001 Device 005: ID 04e8:689e Samsung Electronics Co., Ltd GT-S5670 [Galaxy Fit]

Kod Seç
wsw@wsw-ubnt:~$ rfkill list
Kod Seç
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
1: acer-bluetooth: Bluetooth
Soft blocked: yes
Hard blocked: no

Kod Seç
wsw@wsw-ubnt:~$ sudo lshw -C network
Kod Seç
[sudo] password for wsw:
  *-network               
       description: Ethernet interface
       product: NetLink BCM57780 Gigabit Ethernet PCIe
       vendor: Broadcom Corporation
       physical id: 0
       bus info: pci@0000:03:00.0
       logical name: eth0
       version: 01
       serial: 00:26:2d:9c:02:20
       size: 10Mbit/s
       capacity: 1Gbit/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 duplex=half firmware=sb latency=0 link=no multicast=yes port=MII speed=10Mbit/s
       resources: irq:45 memory:f0200000-f020ffff
  *-network
       description: Wireless interface
       product: AR928X Wireless Network Adapter (PCI-Express)
       vendor: Atheros Communications Inc.
       physical id: 0
       bus info: pci@0000:05:00.0
       logical name: wlan0
       version: 01
       serial: 70:f1:a1:03:dd:aa
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical wireless
       configuration: broadcast=yes driver=ath9k driverversion=3.2.0-17-generic-pae firmware=N/A ip=192.168.0.13 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn
       resources: irq:17 memory:f0300000-f030ffff

Kod Seç
wsw@wsw-ubnt:~$ ifconfig
Kod Seç
eth0      Link encap:Ethernet  HWaddr 00:26:2d:9c:02:20 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:16

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:5408 errors:0 dropped:0 overruns:0 frame:0
          TX packets:5408 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:705641 (705.6 KB)  TX bytes:705641 (705.6 KB)

wlan0     Link encap:Ethernet  HWaddr 70:f1:a1:03:dd:aa 
          inet addr:192.168.0.13  Bcast:192.168.0.255  Mask:255.255.255.0
          inet6 addr: fe80::72f1:a1ff:fe03:ddaa/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:388346 errors:0 dropped:0 overruns:0 frame:0
          TX packets:198096 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:476702818 (476.7 MB)  TX bytes:21698314 (21.6 MB)

Kod Seç
wsw@wsw-ubnt:~$ iwconfig
Kod Seç
lo        no wireless extensions.

wlan0     IEEE 802.11bgn  ESSID:"CBV704W-B915" 
          Mode:Managed  Frequency:2.462 GHz  Access Point: 00:1A:2B:0D:C6:9A   
          Bit Rate=1 Mb/s   Tx-Power=16 dBm   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Power Management:off
          Link Quality=53/70  Signal level=-57 dBm 
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:224   Missed beacon:0

eth0      no wireless extensions.

Kod Seç
wsw@wsw-ubnt:~$ iwlist scanning
Kod Seç
lo        Interface doesn't support scanning.

wlan0     Scan completed :
          Cell 01 - Address: 00:1A:2B:0D:C6:9A
                    Channel:11
                    Frequency:2.462 GHz (Channel 11)
                    Quality=51/70  Signal level=-59 dBm 
                    Encryption key:on
                    ESSID:"CBV704W-B915"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
                              24 Mb/s; 36 Mb/s; 54 Mb/s
                    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
                    Mode:Master
                    Extra:tsf=0000004820b5a006
                    Extra: Last beacon: 89628ms ago
                    IE: Unknown: 000C434256373034572D42393135
                    IE: Unknown: 010882848B962430486C
                    IE: Unknown: 03010B
                    IE: Unknown: 2A0102
                    IE: Unknown: 2F0102
                    IE: Unknown: 32040C121860
                    IE: Unknown: DD090010180201F0000000
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (1) : TKIP
                        Authentication Suites (1) : PSK
                    IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00

eth0      Interface doesn't support scanning.


Kod Seç
wsw@wsw-ubnt:~$ lsmod
Kod Seç
Module                  Size  Used by
btrfs                 638208  0
zlib_deflate           26622  1 btrfs
libcrc32c              12543  1 btrfs
ufs                    78131  0
qnx4                   13309  0
hfsplus                83507  0
hfs                    49479  0
minix                  31418  0
ntfs                  100171  0
vfat                   17308  0
msdos                  17132  0
fat                    55605  2 vfat,msdos
jfs                   175085  0
xfs                   747494  0
reiserfs              230896  0
ext2                   67987  0
cdc_acm                22306  0
usb_storage            39647  0
btusb                  17912  0
parport_pc             32114  0
ppdev                  12849  0
vesafb                 13489  1
arc4                   12473  2
acer_wmi               23480  0
sparse_keymap          13658  1 acer_wmi
uvcvideo               67203  0
videodev               86588  1 uvcvideo
snd_hda_codec_hdmi     31775  1
joydev                 17393  0
snd_hda_codec_realtek   174009  1
snd_seq_midi           13132  0
snd_rawmidi            25424  1 snd_seq_midi
ath9k                 117326  0
snd_seq_midi_event     14475  1 snd_seq_midi
mac80211              436455  1 ath9k
snd_hda_intel          32765  5
ath9k_common           13781  1 ath9k
ath9k_hw              391523  2 ath9k,ath9k_common
snd_hda_codec         109533  3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep              13276  1 snd_hda_codec
ath                    19387  3 ath9k,ath9k_common,ath9k_hw
snd_seq                51567  2 snd_seq_midi,snd_seq_midi_event
psmouse                72846  0
snd_pcm                80845  3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
snd_seq_device         14172  3 snd_seq_midi,snd_rawmidi,snd_seq
fglrx                2756856  182
serio_raw              13027  0
intel_ips              17753  0
cfg80211              178679  3 ath9k,mac80211,ath
snd_timer              28931  2 snd_seq,snd_pcm
snd                    62064  20 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_rawmidi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_seq,snd_pcm,snd_seq_device,snd_timer
mei                    36570  0
soundcore              14635  1 snd
snd_page_alloc         14108  2 snd_hda_intel,snd_pcm
wmi                    18744  1 acer_wmi
bnep                   17830  2
rfcomm                 38139  0
bluetooth             158438  11 btusb,bnep,rfcomm
video                  18907  0
mac_hid                13077  0
lp                     17455  0
parport                40930  3 parport_pc,ppdev,lp
tg3                   141369  0
usbhid                 41906  0
hid                    77367  1 usbhid



Kod Seç
wsw@wsw-ubnt:~$ dmesg
Kod Seç
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-17-generic-pae (buildd@roseapple) (gcc version 4.6.2 (Ubuntu/Linaro 4.6.2-16ubuntu1) ) #27-Ubuntu SMP Fri Feb 24 15:59:25 UTC 2012 (Ubuntu 3.2.0-17.27-generic-pae 3.2.6)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009c400 (usable)
[    0.000000]  BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bf27c000 (usable)
[    0.000000]  BIOS-e820: 00000000bf27c000 - 00000000bf282000 (reserved)
[    0.000000]  BIOS-e820: 00000000bf282000 - 00000000bf3e4000 (usable)
[    0.000000]  BIOS-e820: 00000000bf3e4000 - 00000000bf40f000 (reserved)
[    0.000000]  BIOS-e820: 00000000bf40f000 - 00000000bf46f000 (usable)
[    0.000000]  BIOS-e820: 00000000bf46f000 - 00000000bf470000 (reserved)
[    0.000000]  BIOS-e820: 00000000bf470000 - 00000000bf4f1000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bf4f1000 - 00000000bf70f000 (reserved)
[    0.000000]  BIOS-e820: 00000000bf70f000 - 00000000bf717000 (usable)
[    0.000000]  BIOS-e820: 00000000bf717000 - 00000000bf71f000 (reserved)
[    0.000000]  BIOS-e820: 00000000bf71f000 - 00000000bf77d000 (usable)
[    0.000000]  BIOS-e820: 00000000bf77d000 - 00000000bf79f000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bf79f000 - 00000000bf7df000 (usable)
[    0.000000]  BIOS-e820: 00000000bf7df000 - 00000000bf7ff000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bf7ff000 - 00000000bf800000 (usable)
[    0.000000]  BIOS-e820: 00000000bf800000 - 00000000c0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f060a000 - 00000000f060b000 (reserved)
[    0.000000]  BIOS-e820: 00000000feaff000 - 00000000feb00000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000138000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI present.
[    0.000000] DMI: Packard Bell    EasyNote TJ75                  /EasyNote TJ75                  , BIOS V1.26           05/04/2010
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x138000 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-D3FFF write-protect
[    0.000000]   D4000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 disabled
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 080000000 mask FC0000000 write-back
[    0.000000]   3 base 100000000 mask FC0000000 write-back
[    0.000000]   4 base 138000000 mask FF8000000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 1, base: 0GB, range: 2GB, type WB
[    0.000000] reg 2, base: 2GB, range: 1GB, type WB
[    0.000000] reg 3, base: 4GB, range: 1GB, type WB
[    0.000000] reg 4, base: 4992MB, range: 128MB, type UC
[    0.000000] total RAM covered: 3968M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K chunk_size: 256M num_reg: 4  lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 4GB, range: 1GB, type WB
[    0.000000] reg 3, base: 4992MB, range: 128MB, type UC
[    0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] found SMP MP-table at [c00f6c30] f6c30
[    0.000000] initial memory mapped : 0 - 02000000
[    0.000000] Base memory trampoline at [c0098000] 98000 size 16384
[    0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000
[    0.000000]  0000000000 - 0000200000 page 4k
[    0.000000]  0000200000 - 0037a00000 page 2M
[    0.000000]  0037a00000 - 0037bfe000 page 4k
[    0.000000] kernel direct mapping tables up to 37bfe000 @ 1ffb000-2000000
[    0.000000] RAMDISK: 36500000 - 37278000
[    0.000000] ACPI: RSDP 000f6ac0 00024 (v02 PTLTD )
[    0.000000] ACPI: XSDT bf7f1245 0005C (v01 ACRSYS ACRPRDCT 06040000 INNA 00000000)
[    0.000000] ACPI: FACP bf7e1000 000F4 (v03 INTEL  CALPELLA 06040000 PTEC 00000001)
[    0.000000] ACPI: DSDT bf7e2000 0D929 (v02 Intel  CALPELLA 06040000 INTL 20060912)
[    0.000000] ACPI: FACS bf79afc0 00040
[    0.000000] ACPI: HPET bf7fed6a 00038 (v01 INTEL  CALPELLA 06040000 PTEC 00000001)
[    0.000000] ACPI: MCFG bf7feda2 0003C (v01 INTEL  CALPELLA 06040000 PTEC 00000001)
[    0.000000] ACPI: SLIC bf7fedde 00176 (v01 ACRSYS ACRPRDCT 06040000 ANNI 00000001)
[    0.000000] ACPI: APIC bf7fef54 00084 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
[    0.000000] ACPI: BOOT bf7fefd8 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
[    0.000000] ACPI: SSDT bf7e0000 009F1 (v01  PmRef    CpuPm 00003000 INTL 20060912)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 4100MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37bfe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x00037bfe
[    0.000000]   HighMem  0x00037bfe -> 0x00138000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[9] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009c
[    0.000000]     0: 0x00000100 -> 0x000bf27c
[    0.000000]     0: 0x000bf282 -> 0x000bf3e4
[    0.000000]     0: 0x000bf40f -> 0x000bf46f
[    0.000000]     0: 0x000bf70f -> 0x000bf717
[    0.000000]     0: 0x000bf71f -> 0x000bf77d
[    0.000000]     0: 0x000bf79f -> 0x000bf7df
[    0.000000]     0: 0x000bf7ff -> 0x000bf800
[    0.000000]     0: 0x00100000 -> 0x00138000
[    0.000000] On node 0 totalpages: 1012849
[    0.000000] free_area_init_node: node 0, pgdat c18651c0, node_mem_map f3e00200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3948 pages, LIFO batch:0
[    0.000000]   Normal zone: 1752 pages used for memmap
[    0.000000]   Normal zone: 222502 pages, LIFO batch:31
[    0.000000]   HighMem zone: 8201 pages used for memmap
[    0.000000]   HighMem zone: 776414 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[    0.000000] PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
[    0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f7800000 s34176 r0 d23168 u524288
[    0.000000] pcpu-alloc: s34176 r0 d23168 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1002864
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-17-generic-pae root=UUID=726e79d5-2542-4953-9721-2c237e8ea5bc ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 20446976 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (00037bfe:00138000)
[    0.000000] Memory: 3966244k/5111808k available (5811k kernel code, 85152k reserved, 2839k data, 740k init, 3138460k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
[    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
[    0.000000]       .init : 0xc1873000 - 0xc192c000   ( 740 kB)
[    0.000000]       .data : 0xc15accbc - 0xc1872a40   (2839 kB)
[    0.000000]       .text : 0xc1000000 - 0xc15accbc   (5811 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:2304 nr_irqs:712 16
[    0.000000] CPU 0 irqstacks, hard=f740a000 soft=f740c000
[    0.000000] Extended CMOS year: 2000
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.004000] Detected 2260.765 MHz processor.
[    0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 4521.53 BogoMIPS (lpj=9043060)
[    0.000005] pid_max: default: 32768 minimum: 301
[    0.000024] Security Framework initialized
[    0.000037] AppArmor: AppArmor initialized
[    0.000039] Yama: becoming mindful.
[    0.000087] Mount-cache hash table entries: 512
[    0.000194] Initializing cgroup subsys cpuacct
[    0.000199] Initializing cgroup subsys memory
[    0.000206] Initializing cgroup subsys devices
[    0.000208] Initializing cgroup subsys freezer
[    0.000210] Initializing cgroup subsys blkio
[    0.000215] Initializing cgroup subsys perf_event
[    0.000237] CPU: Physical Processor ID: 0
[    0.000238] CPU: Processor Core ID: 0
[    0.000244] mce: CPU supports 9 MCE banks
[    0.000254] CPU0: Thermal monitoring enabled (TM1)
[    0.000261] using mwait in idle threads.
[    0.002201] ACPI: Core revision 20110623
[    0.016570] ftrace: allocating 26549 entries in 52 pages
[    0.024224] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.024612] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.064214] CPU0: Intel(R) Core(TM) i5 CPU       M 430  @ 2.27GHz stepping 02
[    0.168904] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[    0.168911] ... version:                3
[    0.168913] ... bit width:              48
[    0.168914] ... generic registers:      4
[    0.168915] ... value mask:             0000ffffffffffff
[    0.168916] ... max period:             000000007fffffff
[    0.168918] ... fixed-purpose events:   3
[    0.168919] ... event mask:             000000070000000f
[    0.169065] NMI watchdog enabled, takes one hw-pmu counter.
[    0.169145] CPU 1 irqstacks, hard=f7512000 soft=f7514000
[    0.169146] Booting Node   0, Processors  #1
[    0.169148] smpboot cpu 1: start_ip = 98000
[    0.179367] Initializing CPU#1
[    0.276765] NMI watchdog enabled, takes one hw-pmu counter.
[    0.276854] CPU 2 irqstacks, hard=f7520000 soft=f7522000
[    0.276856]  #2
[    0.276857] smpboot cpu 2: start_ip = 98000
[    0.286989] Initializing CPU#2
[    0.384639] NMI watchdog enabled, takes one hw-pmu counter.
[    0.384742] CPU 3 irqstacks, hard=f7554000 soft=f7556000
[    0.384744]  #3 Ok.
[    0.384745] smpboot cpu 3: start_ip = 98000
[    0.394877] Initializing CPU#3
[    0.492358] NMI watchdog enabled, takes one hw-pmu counter.
[    0.492396] Brought up 4 CPUs
[    0.492398] Total of 4 processors activated (18087.23 BogoMIPS).
[    0.495415] devtmpfs: initialized
[    0.495524] EVM: security.selinux
[    0.495526] EVM: security.SMACK64
[    0.495527] EVM: security.capability
[    0.495552] PM: Registering ACPI NVS region at bf470000 (528384 bytes)
[    0.495564] PM: Registering ACPI NVS region at bf77d000 (139264 bytes)
[    0.496476] print_constraints: dummy:
[    0.496505] RTC time: 11:59:34, date: 03/09/12
[    0.496541] NET: Registered protocol family 16
[    0.496636] Trying to unpack rootfs image as initramfs...
[    0.496639] EISA bus registered
[    0.496657] ACPI: bus type pci registered
[    0.496724] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.496727] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.496729] PCI: Using MMCONFIG for extended config space
[    0.496730] PCI: Using configuration type 1 for base access
[    0.497625] bio: create slab <bio-0> at 0
[    0.497703] ACPI: Added _OSI(Module Device)
[    0.497705] ACPI: Added _OSI(Processor Device)
[    0.497707] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.497709] ACPI: Added _OSI(Processor Aggregator Device)
[    0.499630] ACPI: EC: Look up EC in DSDT
[    0.506037] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.506328] ACPI: SSDT bf71ac18 003AE (v01  PmRef  Cpu0Ist 00003000 INTL 20060912)
[    0.506797] ACPI: Dynamic OEM Table Load:
[    0.506800] ACPI: SSDT   (null) 003AE (v01  PmRef  Cpu0Ist 00003000 INTL 20060912)
[    0.506938] ACPI: SSDT bf718018 00891 (v01  PmRef  Cpu0Cst 00003001 INTL 20060912)
[    0.507387] ACPI: Dynamic OEM Table Load:
[    0.507390] ACPI: SSDT   (null) 00891 (v01  PmRef  Cpu0Cst 00003001 INTL 20060912)
[    0.560400] ACPI: SSDT bf719a98 00303 (v01  PmRef    ApIst 00003000 INTL 20060912)
[    0.560921] ACPI: Dynamic OEM Table Load:
[    0.560923] ACPI: SSDT   (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20060912)
[    0.584203] ACPI: SSDT bf717d98 00119 (v01  PmRef    ApCst 00003000 INTL 20060912)
[    0.584692] ACPI: Dynamic OEM Table Load:
[    0.584695] ACPI: SSDT   (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20060912)
[    0.766807] Freeing initrd memory: 13792k freed
[    1.137668] ACPI: Interpreter enabled
[    1.137679] ACPI: (supports S0 S3 S4 S5)
[    1.137704] ACPI: Using IOAPIC for interrupt routing
[    1.151218] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    1.151424] ACPI: No dock devices found.
[    1.151426] HEST: Table not found.
[    1.151430] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.151793] \_SB_.PCI0:_OSC invalid UUID
[    1.151795] _OSC request data:1 8 1f
[    1.151799] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    1.152377] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    1.152379] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    1.152382] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    1.152384] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[    1.152386] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[    1.152388] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[    1.152391] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfeafffff]
[    1.152405] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
[    1.152425] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[    1.152446] pci 0000:00:01.0: [8086:0045] type 1 class 0x000604
[    1.152480] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    1.152483] pci 0000:00:01.0: PME# disabled
[    1.152519] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
[    1.152546] pci 0000:00:16.0: reg 10: [mem 0xf0604000-0xf060400f 64bit]
[    1.152634] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    1.152638] pci 0000:00:16.0: PME# disabled
[    1.152667] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[    1.152686] pci 0000:00:1a.0: reg 10: [mem 0xf0606000-0xf06063ff]
[    1.152769] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    1.152773] pci 0000:00:1a.0: PME# disabled
[    1.152794] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[    1.152808] pci 0000:00:1b.0: reg 10: [mem 0xf0600000-0xf0603fff 64bit]
[    1.152869] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.152872] pci 0000:00:1b.0: PME# disabled
[    1.152890] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[    1.152953] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.152956] pci 0000:00:1c.0: PME# disabled
[    1.152975] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
[    1.153037] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    1.153041] pci 0000:00:1c.1: PME# disabled
[    1.153069] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[    1.153088] pci 0000:00:1d.0: reg 10: [mem 0xf0607000-0xf06073ff]
[    1.153170] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    1.153174] pci 0000:00:1d.0: PME# disabled
[    1.153191] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[    1.153248] pci 0000:00:1f.0: [8086:3b09] type 0 class 0x000601
[    1.153363] pci 0000:00:1f.2: [8086:3b29] type 0 class 0x000106
[    1.153380] pci 0000:00:1f.2: reg 10: [io  0x1830-0x1837]
[    1.153388] pci 0000:00:1f.2: reg 14: [io  0x1824-0x1827]
[    1.153395] pci 0000:00:1f.2: reg 18: [io  0x1828-0x182f]
[    1.153402] pci 0000:00:1f.2: reg 1c: [io  0x1820-0x1823]
[    1.153409] pci 0000:00:1f.2: reg 20: [io  0x1800-0x181f]
[    1.153417] pci 0000:00:1f.2: reg 24: [mem 0xf0608000-0xf06087ff]
[    1.153458] pci 0000:00:1f.2: PME# supported from D3hot
[    1.153461] pci 0000:00:1f.2: PME# disabled
[    1.153476] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[    1.153489] pci 0000:00:1f.3: reg 10: [mem 0xf0609000-0xf06090ff 64bit]
[    1.153508] pci 0000:00:1f.3: reg 20: [io  0x1840-0x185f]
[    1.153541] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
[    1.153562] pci 0000:00:1f.6: reg 10: [mem 0xf060a000-0xf060afff 64bit]
[    1.153666] pci 0000:02:00.0: [1002:68c1] type 0 class 0x000300
[    1.153679] pci 0000:02:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.153689] pci 0000:02:00.0: reg 18: [mem 0xcfee0000-0xcfefffff 64bit]
[    1.153696] pci 0000:02:00.0: reg 20: [io  0x2000-0x20ff]
[    1.153708] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    1.153736] pci 0000:02:00.0: supports D1 D2
[    1.153754] pci 0000:02:00.1: [1002:aa60] type 0 class 0x000403
[    1.153766] pci 0000:02:00.1: reg 10: [mem 0xcfedc000-0xcfedffff 64bit]
[    1.153820] pci 0000:02:00.1: supports D1 D2
[    1.153848] pci 0000:00:01.0: PCI bridge to [bus 02-02]
[    1.153851] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
[    1.153854] pci 0000:00:01.0:   bridge window [mem 0xcfe00000-0xcfefffff]
[    1.153857] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.153943] pci 0000:03:00.0: [14e4:1692] type 0 class 0x000200
[    1.153965] pci 0000:03:00.0: reg 10: [mem 0xf0200000-0xf020ffff 64bit]
[    1.154083] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    1.154087] pci 0000:03:00.0: PME# disabled
[    1.159031] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[    1.159034] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    1.159038] pci 0000:00:1c.0:   bridge window [mem 0xf0200000-0xf02fffff]
[    1.159043] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[    1.159097] pci 0000:05:00.0: [168c:002a] type 0 class 0x000280
[    1.159119] pci 0000:05:00.0: reg 10: [mem 0xf0300000-0xf030ffff 64bit]
[    1.159228] pci 0000:05:00.0: supports D1
[    1.159229] pci 0000:05:00.0: PME# supported from D0 D1 D3hot
[    1.159234] pci 0000:05:00.0: PME# disabled
[    1.159258] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    1.159267] pci 0000:00:1c.1: PCI bridge to [bus 05-05]
[    1.159272] pci 0000:00:1c.1:   bridge window [mem 0xf0300000-0xf03fffff]
[    1.159330] pci 0000:00:1e.0: PCI bridge to [bus 0f-0f] (subtractive decode)
[    1.159338] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    1.159341] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    1.159343] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    1.159345] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    1.159347] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    1.159349] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[    1.159351] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfeafffff] (subtractive decode)
[    1.159366] pci_bus 0000:00: on NUMA node 0
[    1.159369] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    1.159570] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[    1.159626] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    1.159756] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    1.159809] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    1.159921] \_SB_.PCI0:_OSC invalid UUID
[    1.159923] _OSC request data:1 1f 1f
[    1.159927]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    1.159958] \_SB_.PCI0:_OSC invalid UUID
[    1.159959] _OSC request data:1 0 1d
[    1.159963]  pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[    1.159965] ACPI _OSC control for PCIe not granted, disabling ASPM
[    1.164281] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[    1.164342] pci 0000:ff:00.0: [8086:2c62] type 0 class 0x000600
[    1.164362] pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600
[    1.164382] pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600
[    1.164400] pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600
[    1.164418] pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600
[    1.164435] pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600
[    1.164462] pci_bus 0000:ff: on NUMA node 0
[    1.164469]  pci0000:ff: Requesting ACPI _OSC control (0x1d)
[    1.164471]  pci0000:ff: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    1.164473] ACPI _OSC control for PCIe not granted, disabling ASPM
[    1.164698] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    1.164741] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    1.164783] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    1.164824] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[    1.164865] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    1.164907] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    1.164948] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[    1.164991] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    1.165102] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[    1.165107] vgaarb: loaded
[    1.165108] vgaarb: bridge control possible 0000:02:00.0
[    1.165210] i2c-core: driver [aat2870] using legacy suspend method
[    1.165212] i2c-core: driver [aat2870] using legacy resume method
[    1.165283] SCSI subsystem initialized
[    1.165334] libata version 3.00 loaded.
[    1.165374] usbcore: registered new interface driver usbfs
[    1.165383] usbcore: registered new interface driver hub
[    1.165407] usbcore: registered new device driver usb
[    1.165485] PCI: Using ACPI for IRQ routing
[    1.171170] PCI: pci_cache_line_size set to 64 bytes
[    1.171261] reserve RAM buffer: 000000000009c400 - 000000000009ffff
[    1.171264] reserve RAM buffer: 00000000bf27c000 - 00000000bfffffff
[    1.171268] reserve RAM buffer: 00000000bf3e4000 - 00000000bfffffff
[    1.171272] reserve RAM buffer: 00000000bf46f000 - 00000000bfffffff
[    1.171276] reserve RAM buffer: 00000000bf717000 - 00000000bfffffff
[    1.171279] reserve RAM buffer: 00000000bf77d000 - 00000000bfffffff
[    1.171281] reserve RAM buffer: 00000000bf7df000 - 00000000bfffffff
[    1.171283] reserve RAM buffer: 00000000bf800000 - 00000000bfffffff
[    1.171370] NetLabel: Initializing
[    1.171372] NetLabel:  domain hash size = 128
[    1.171373] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.171383] NetLabel:  unlabeled traffic allowed by default
[    1.171423] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    1.171429] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    1.173441] Switching to clocksource hpet
[    1.179813] AppArmor: AppArmor Filesystem Enabled
[    1.179837] pnp: PnP ACPI init
[    1.179854] ACPI: bus type pnp registered
[    1.180177] pnp 00:00: [bus 00-fe]
[    1.180180] pnp 00:00: [io  0x0000-0x0cf7 window]
[    1.180182] pnp 00:00: [io  0x0cf8-0x0cff]
[    1.180184] pnp 00:00: [io  0x0d00-0xffff window]
[    1.180186] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    1.180189] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    1.180191] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    1.180193] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    1.180195] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    1.180197] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    1.180199] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    1.180201] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    1.180203] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    1.180204] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    1.180206] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    1.180208] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    1.180210] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    1.180212] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    1.180214] pnp 00:00: [mem 0xc0000000-0xfeafffff window]
[    1.180216] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[    1.180283] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    1.180318] pnp 00:01: [io  0x0000-0x001f]
[    1.180319] pnp 00:01: [io  0x0081-0x0091]
[    1.180321] pnp 00:01: [io  0x0093-0x009f]
[    1.180323] pnp 00:01: [io  0x00c0-0x00df]
[    1.180325] pnp 00:01: [dma 4]
[    1.180348] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    1.180355] pnp 00:02: [mem 0xff000000-0xffffffff]
[    1.180379] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    1.180443] pnp 00:03: [irq 0 disabled]
[    1.180453] pnp 00:03: [irq 8]
[    1.180455] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[    1.180480] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    1.180489] pnp 00:04: [io  0x00f0]
[    1.180494] pnp 00:04: [irq 13]
[    1.180518] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    1.180528] pnp 00:05: [io  0x002e-0x002f]
[    1.180529] pnp 00:05: [io  0x004e-0x004f]
[    1.180531] pnp 00:05: [io  0x0061]
[    1.180533] pnp 00:05: [io  0x0063]
[    1.180534] pnp 00:05: [io  0x0065]
[    1.180536] pnp 00:05: [io  0x0067]
[    1.180537] pnp 00:05: [io  0x0070]
[    1.180538] pnp 00:05: [io  0x0080]
[    1.180540] pnp 00:05: [io  0x0092]
[    1.180542] pnp 00:05: [io  0x00b2-0x00b3]
[    1.180543] pnp 00:05: [io  0x0068-0x006f]
[    1.180545] pnp 00:05: [io  0x0500-0x050f]
[    1.180546] pnp 00:05: [io  0xffff]
[    1.180548] pnp 00:05: [io  0xffff]
[    1.180549] pnp 00:05: [io  0x0400-0x047f]
[    1.180551] pnp 00:05: [io  0x1180-0x11ff]
[    1.180553] pnp 00:05: [io  0xfe00]
[    1.180554] pnp 00:05: [mem 0xff800000-0xff800fff]
[    1.180610] system 00:05: [io  0x0500-0x050f] has been reserved
[    1.180613] system 00:05: [io  0xffff] has been reserved
[    1.180615] system 00:05: [io  0xffff] has been reserved
[    1.180617] system 00:05: [io  0x0400-0x047f] has been reserved
[    1.180619] system 00:05: [io  0x1180-0x11ff] has been reserved
[    1.180622] system 00:05: [io  0xfe00] has been reserved
[    1.180625] system 00:05: [mem 0xff800000-0xff800fff] has been reserved
[    1.180628] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.180654] pnp 00:06: [io  0x0070-0x0077]
[    1.180681] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.180721] pnp 00:07: [io  0x0060]
[    1.180723] pnp 00:07: [io  0x0064]
[    1.180728] pnp 00:07: [irq 1]
[    1.180756] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.180767] pnp 00:08: [irq 12]
[    1.180794] pnp 00:08: Plug and Play ACPI device, IDs SYN0302 SYN0300 SYN0002 PNP0f13 (active)
[    1.181083] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
[    1.181085] pnp 00:09: [mem 0xfed10000-0xfed13fff]
[    1.181087] pnp 00:09: [mem 0xfed18000-0xfed18fff]
[    1.181089] pnp 00:09: [mem 0xfed19000-0xfed19fff]
[    1.181091] pnp 00:09: [mem 0xe0000000-0xefffffff]
[    1.181094] pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled]
[    1.181096] pnp 00:09: [mem 0xfeaff000-0xfeafffff]
[    1.181098] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
[    1.181100] pnp 00:09: [mem 0xfed90000-0xfed8ffff disabled]
[    1.181101] pnp 00:09: [mem 0xfed40000-0xfed44fff]
[    1.181103] pnp 00:09: [mem 0xfed45000-0xfed8ffff]
[    1.181105] pnp 00:09: [mem 0xff000000-0xffffffff]
[    1.181107] pnp 00:09: [mem 0xfee00000-0xfeefffff]
[    1.181171] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.181174] system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
[    1.181176] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    1.181179] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    1.181181] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[    1.181184] system 00:09: [mem 0xfeaff000-0xfeafffff] has been reserved
[    1.181186] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.181188] system 00:09: [mem 0xfed40000-0xfed44fff] has been reserved
[    1.181191] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[    1.181193] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[    1.181196] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    1.181199] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.181326] pnp 00:0a: [bus ff]
[    1.181385] pnp 00:0a: Plug and Play ACPI device, IDs PNP0a03 (active)
[    1.181401] pnp: PnP ACPI: found 11 devices
[    1.181403] ACPI: ACPI bus type pnp unregistered
[    1.181406] PnPBIOS: Disabled by ACPI PNP
[    1.217781] PCI: max bus depth: 1 pci_try_num: 2
[    1.217812] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
[    1.217816] pci 0000:00:1c.1: BAR 13: assigned [io  0x4000-0x4fff]
[    1.217819] pci 0000:02:00.0: BAR 6: assigned [mem 0xcfe00000-0xcfe1ffff pref]
[    1.217822] pci 0000:00:01.0: PCI bridge to [bus 02-02]
[    1.217824] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
[    1.217827] pci 0000:00:01.0:   bridge window [mem 0xcfe00000-0xcfefffff]
[    1.217830] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.217834] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[    1.217837] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    1.217841] pci 0000:00:1c.0:   bridge window [mem 0xf0200000-0xf02fffff]
[    1.217845] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[    1.217850] pci 0000:00:1c.1: PCI bridge to [bus 05-05]
[    1.217852] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    1.217857] pci 0000:00:1c.1:   bridge window [mem 0xf0300000-0xf03fffff]
[    1.217860] pci 0000:00:1c.1:   bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
[    1.217866] pci 0000:00:1e.0: PCI bridge to [bus 0f-0f]
[    1.217886] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.217890] pci 0000:00:01.0: setting latency timer to 64
[    1.217895] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.217899] pci 0000:00:1c.0: setting latency timer to 64
[    1.217907] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.217911] pci 0000:00:1c.1: setting latency timer to 64
[    1.217916] pci 0000:00:1e.0: setting latency timer to 64
[    1.217919] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.217921] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.217923] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.217925] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[    1.217927] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[    1.217929] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000e3fff]
[    1.217931] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfeafffff]
[    1.217933] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    1.217935] pci_bus 0000:02: resource 1 [mem 0xcfe00000-0xcfefffff]
[    1.217937] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    1.217939] pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
[    1.217941] pci_bus 0000:03: resource 1 [mem 0xf0200000-0xf02fffff]
[    1.217943] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
[    1.217946] pci_bus 0000:05: resource 0 [io  0x4000-0x4fff]
[    1.217947] pci_bus 0000:05: resource 1 [mem 0xf0300000-0xf03fffff]
[    1.217949] pci_bus 0000:05: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
[    1.217952] pci_bus 0000:0f: resource 4 [io  0x0000-0x0cf7]
[    1.217954] pci_bus 0000:0f: resource 5 [io  0x0d00-0xffff]
[    1.217956] pci_bus 0000:0f: resource 6 [mem 0x000a0000-0x000bffff]
[    1.217958] pci_bus 0000:0f: resource 7 [mem 0x000d4000-0x000d7fff]
[    1.217960] pci_bus 0000:0f: resource 8 [mem 0x000d8000-0x000dbfff]
[    1.217961] pci_bus 0000:0f: resource 9 [mem 0x000e0000-0x000e3fff]
[    1.217963] pci_bus 0000:0f: resource 10 [mem 0xc0000000-0xfeafffff]
[    1.217994] NET: Registered protocol family 2
[    1.218046] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    1.218208] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    1.218787] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    1.219077] TCP: Hash tables configured (established 131072 bind 65536)
[    1.219079] TCP reno registered
[    1.219081] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    1.219090] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    1.219149] NET: Registered protocol family 1
[    1.219207] pci 0000:02:00.0: Boot video device
[    1.219252] PCI: CLS 64 bytes, default 64
[    1.219257] Simple Boot Flag at 0x3e set to 0x1
[    1.219705] audit: initializing netlink socket (disabled)
[    1.219713] type=2000 audit(1331294374.056:1): initialized
[    1.244885] highmem bounce pool size: 64 pages
[    1.244891] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.255155] VFS: Disk quotas dquot_6.5.2
[    1.255217] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.255725] fuse init (API version 7.17)
[    1.255811] msgmni has been set to 1643
[    1.256143] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.256168] io scheduler noop registered
[    1.256170] io scheduler deadline registered
[    1.256177] io scheduler cfq registered (default)
[    1.256281] pcieport 0000:00:01.0: setting latency timer to 64
[    1.256310] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    1.256434] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.256453] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.256517] intel_idle: MWAIT substates: 0x1120
[    1.256518] intel_idle: v0.4 model 0x25
[    1.256519] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.258061] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.258132] ACPI: AC Adapter [ADP1] (on-line)
[    1.258264] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    1.259756] ACPI: Lid Switch [LID0]
[    1.259823] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[    1.259828] ACPI: Sleep Button [SLPB]
[    1.259862] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.259865] ACPI: Power Button [PWRF]
[    1.288455] thermal LNXTHERM:00: registered as thermal_zone0
[    1.288460] ACPI: Thermal Zone [TZS0] (57 C)
[    1.298280] thermal LNXTHERM:01: registered as thermal_zone1
[    1.298285] ACPI: Thermal Zone [TZS1] (40 C)
[    1.298310] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    1.298318] ACPI: Battery Slot [BAT0] (battery present)
[    1.298358] ERST: Table is not found!
[    1.298360] GHES: HEST is not enabled!
[    1.298412] isapnp: Scanning for PnP cards...
[    1.298435] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.651013] isapnp: No Plug & Play device found
[    1.837621] ACPI: EC: GPE storm detected, transactions will use polling mode
[    2.020053] Linux agpgart interface v0.103
[    2.021409] brd: module loaded
[    2.022063] loop: module loaded
[    2.022166] ahci 0000:00:1f.2: version 3.0
[    2.022182] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    2.022215] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[    2.022242] ahci: SSS flag set, parallel bus scan disabled
[    2.022265] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x11 impl SATA mode
[    2.022268] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[    2.022272] ahci 0000:00:1f.2: setting latency timer to 64
[    2.028133] scsi0 : ahci
[    2.028209] scsi1 : ahci
[    2.028279] scsi2 : ahci
[    2.028341] scsi3 : ahci
[    2.028401] scsi4 : ahci
[    2.028447] ata1: SATA max UDMA/133 abar m2048@0xf0608000 port 0xf0608100 irq 41
[    2.028449] ata2: DUMMY
[    2.028450] ata3: DUMMY
[    2.028451] ata4: DUMMY
[    2.028453] ata5: SATA max UDMA/133 abar m2048@0xf0608000 port 0xf0608300 irq 41
[    2.028784] Fixed MDIO Bus: probed
[    2.028800] tun: Universal TUN/TAP device driver, 1.6
[    2.028802] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    2.028842] PPP generic driver version 2.4.2
[    2.028920] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.028933] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.028945] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    2.028948] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    2.028982] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    2.029005] ehci_hcd 0000:00:1a.0: debug port 2
[    2.032950] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    2.032963] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf0606000
[    2.047669] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    2.047825] hub 1-0:1.0: USB hub found
[    2.047829] hub 1-0:1.0: 3 ports detected
[    2.047892] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    2.047903] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    2.047906] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    2.047948] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.047970] ehci_hcd 0000:00:1d.0: debug port 2
[    2.051902] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    2.051914] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf0607000
[    2.067627] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    2.067766] hub 2-0:1.0: USB hub found
[    2.067770] hub 2-0:1.0: 3 ports detected
[    2.067825] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.067835] uhci_hcd: USB Universal Host Controller Interface driver
[    2.067877] usbcore: registered new interface driver libusual
[    2.067917] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.085897] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.085903] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.086008] mousedev: PS/2 mouse device common for all mice
[    2.086666] rtc_cmos 00:06: RTC can wake from S4
[    2.086761] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    2.086787] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    2.086832] device-mapper: uevent: version 1.0.3
[    2.086890] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    2.086916] EISA: Probing bus 0 at eisa.0
[    2.086918] EISA: Cannot allocate resource for mainboard
[    2.086919] Cannot allocate resource for EISA slot 1
[    2.086921] Cannot allocate resource for EISA slot 2
[    2.086922] Cannot allocate resource for EISA slot 3
[    2.086924] Cannot allocate resource for EISA slot 4
[    2.086925] Cannot allocate resource for EISA slot 5
[    2.086926] Cannot allocate resource for EISA slot 6
[    2.086928] Cannot allocate resource for EISA slot 7
[    2.086929] Cannot allocate resource for EISA slot 8
[    2.086931] EISA: Detected 0 cards.
[    2.086939] cpufreq-nforce2: No nForce2 chipset.
[    2.087028] cpuidle: using governor ladder
[    2.087171] cpuidle: using governor menu
[    2.087173] EFI Variables Facility v0.08 2004-May-17
[    2.087356] TCP cubic registered
[    2.087458] NET: Registered protocol family 10
[    2.087874] NET: Registered protocol family 17
[    2.087886] Registering the dns_resolver key type
[    2.087906] Using IPI No-Shortcut mode
[    2.088007] PM: Hibernation image not present or could not be loaded.
[    2.088017] registered taskstats version 1
[    2.103820]   Magic number: 4:265:984
[    2.103982] rtc_cmos 00:06: setting system clock to 2012-03-09 11:59:35 UTC (1331294375)
[    2.105237] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.105238] EDD information not available.
[    2.110290] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    2.215399] Refined TSC clocksource calibration: 2260.984 MHz.
[    2.215407] Switching to clocksource tsc
[    2.347147] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.359119] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    2.375060] ata1.00: ATA-8: WDC WD5000BEKT-00KA9T0, 01.01A01, max UDMA/133
[    2.375065] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.377217] ata1.00: configured for UDMA/133
[    2.377546] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000BEKT-0 01.0 PQ: 0 ANSI: 5
[    2.377788] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.377847] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.378068] sd 0:0:0:0: [sda] Write Protect is off
[    2.378076] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.378135] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.457849]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[    2.459222] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.491653] hub 1-1:1.0: USB hub found
[    2.491850] hub 1-1:1.0: 6 ports detected
[    2.602619] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[    2.694453] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.695974] ata5.00: ATAPI: HL-DT-STDVDRAM GT30N, 1.01, max UDMA/100
[    2.697885] ata5.00: configured for UDMA/100
[    2.700528] scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GT30N     1.01 PQ: 0 ANSI: 5
[    2.703260] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.703265] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.703496] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    2.703614] sr 4:0:0:0: Attached scsi generic sg1 type 5
[    2.703837] Freeing unused kernel memory: 740k freed
[    2.704076] Write protecting the kernel text: 5812k
[    2.704163] Write protecting the kernel read-only data: 2372k
[    2.704165] NX-protecting the kernel data: 4428k
[    2.723003] udevd[105]: starting version 175
[    2.734975] hub 2-1:1.0: USB hub found
[    2.735051] hub 2-1:1.0: 8 ports detected
[    2.918228] ACPI: Battery Slot [BAT0] (battery present)
[    3.005921] usb 2-1.1: new full-speed USB device number 3 using ehci_hcd
[    3.104229] input: A4TECH USB Device as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input4
[    3.104437] generic-usb 0003:09DA:054F.0001: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:1d.0-1.1/input0
[    3.105504] input: A4TECH USB Device as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/input/input5
[    3.105673] generic-usb 0003:09DA:054F.0002: input,hidraw1: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:1d.0-1.1/input1
[    3.105700] usbcore: registered new interface driver usbhid
[    3.105703] usbhid: USB HID core driver
[    3.169600] usb 2-1.5: new high-speed USB device number 4 using ehci_hcd
[    3.210272] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[    3.212950] tg3.c:v3.121 (November 2, 2011)
[    3.212999] tg3 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    3.213010] tg3 0000:03:00.0: setting latency timer to 64
[    3.235358] tg3 mdio bus: probed
[    3.245154] tg3 0000:03:00.0: eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address 00:26:2d:9c:02:20
[    3.245157] tg3 0000:03:00.0: eth0: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=300:01)
[    3.245160] tg3 0000:03:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    3.245162] tg3 0000:03:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[   11.539348] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.549895] udevd[321]: starting version 175
[   11.582247] lp: driver loaded but no devices found
[   11.591057] Adding 7999484k swap on /dev/sda5.  Priority:-1 extents:1 across:7999484k
[   11.723528] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[   11.819377] type=1400 audit(1331287185.229:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=508 comm="apparmor_parser"
[   11.819787] type=1400 audit(1331287185.229:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=508 comm="apparmor_parser"
[   11.820018] type=1400 audit(1331287185.229:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=508 comm="apparmor_parser"
[   11.827788] Bluetooth: Core ver 2.16
[   11.827866] NET: Registered protocol family 31
[   11.827868] Bluetooth: HCI device and connection manager initialized
[   11.827871] Bluetooth: HCI socket layer initialized
[   11.827874] Bluetooth: L2CAP socket layer initialized
[   11.827880] Bluetooth: SCO socket layer initialized
[   11.832914] Bluetooth: RFCOMM TTY layer initialized
[   11.832926] Bluetooth: RFCOMM socket layer initialized
[   11.832928] Bluetooth: RFCOMM ver 1.11
[   11.833718] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   11.833720] Bluetooth: BNEP filters: protocol multicast
[   11.891949] wmi: Mapper loaded
[   11.893248] mei: module is from the staging directory, the quality is unknown, you have been warned.
[   11.893585] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   11.893592] mei 0000:00:16.0: setting latency timer to 64
[   11.893662] mei 0000:00:16.0: irq 42 for MSI/MSI-X
[   11.897349] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   11.897354] Disabling lock debugging due to kernel taint
[   11.912109] tg3 0000:03:00.0: irq 43 for MSI/MSI-X
[   11.926065] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[   11.926093] intel ips 0000:00:1f.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   11.926136] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
[   11.937297] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.937592] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.961701] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[   11.966142] [fglrx] Maximum main memory to use for locked dma buffers: 3726 MBytes.
[   11.966440] [fglrx]   vendor: 1002 device: 68c1 count: 1
[   11.966967] [fglrx] ioport: bar 4, base 0x2000, size: 0x100
[   11.966986] pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   11.966992] pci 0000:02:00.0: setting latency timer to 64
[   11.967250] [fglrx] Kernel PAT support is enabled
[   11.967274] [fglrx] module loaded - fglrx 8.91.4 [Oct 25 2011] with 1 minors
[   11.969014] cfg80211: Calling CRDA to update world regulatory domain
[   11.975916] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   11.975979] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   11.976007] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[   11.989496] ath9k 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   11.989508] ath9k 0000:05:00.0: setting latency timer to 64
[   12.073411] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   12.073499] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   12.073734] snd_hda_intel 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   12.073811] snd_hda_intel 0000:02:00.1: irq 45 for MSI/MSI-X
[   12.073835] snd_hda_intel 0000:02:00.1: setting latency timer to 64
[   12.097754] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[   12.097847] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:02:00.1/sound/card1/input8
[   12.112351] acpi device:03: registered as cooling_device4
[   12.112543] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input9
[   12.112638] ACPI: Video Device [PEGP] (multi-head: yes  rom: no  post: no)
[   12.125662] Linux video capture interface: v2.00
[   12.127172] uvcvideo: Found UVC 1.00 device Video WebCam (04f2:b044)
[   12.159222] acer_wmi: Acer Laptop ACPI-WMI Extras
[   12.181117] cfg80211: World regulatory domain updated:
[   12.181121] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   12.181125] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.181129] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.181135] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.181138] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.181141] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.184001] input: Video WebCam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input10
[   12.184074] usbcore: registered new interface driver uvcvideo
[   12.184076] USB Video Class driver (1.1.1)
[   12.230411] init: failsafe main process (696) killed by TERM signal
[   12.232206] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   12.250352] type=1400 audit(1331287185.661:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=810 comm="apparmor_parser"
[   12.254151] type=1400 audit(1331287185.665:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=814 comm="apparmor_parser"
[   12.254870] type=1400 audit(1331287185.665:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=814 comm="apparmor_parser"
[   12.256079] type=1400 audit(1331287185.669:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=811 comm="apparmor_parser"
[   12.256218] type=1400 audit(1331287185.669:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=815 comm="apparmor_parser"
[   12.256615] type=1400 audit(1331287185.669:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=811 comm="apparmor_parser"
[   12.256861] type=1400 audit(1331287185.669:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=815 comm="apparmor_parser"
[   12.419519] tg3 0000:03:00.0: eth0: Link is down
[   12.419708] ath: EEPROM regdomain: 0x65
[   12.419710] ath: EEPROM indicates we should expect a direct regpair map
[   12.419712] ath: Country alpha2 being used: 00
[   12.419714] ath: Regpair used: 0x65
[   12.419717] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   12.419719] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   12.419721] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   12.419724] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   12.419725] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   12.419728] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   12.419729] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   12.419732] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   12.419733] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   12.419736] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   12.419738] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   12.419740] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   12.419742] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   12.419744] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   12.419746] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   12.419748] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   12.419750] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   12.419752] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   12.419754] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   12.419756] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   12.419758] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   12.419760] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   12.419762] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   12.419764] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   12.419766] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   12.419768] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   12.419770] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[   12.422639] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[   12.425118] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[   12.425814] Registered led device: ath9k-phy0
[   12.425823] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xf8880000, irq=17
[   12.484279] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   12.484673] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   12.566923] acer_wmi: Function bitmap for Communication Device: 0x18
[   12.567433] acer_wmi: Brightness must be controlled by generic video driver
[   13.183570] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input11
[   13.205323] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input12
[   13.228054] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[   13.228058] vesafb: scrolling: redraw
[   13.228061] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[   13.230165] vesafb: framebuffer at 0xd0000000, mapped to 0xf8e00000, using 3072k, total 3072k
[   13.230355] Console: switching to colour frame buffer device 128x48
[   13.230381] fb0: VESA VGA frame buffer device
[   13.244826] ppdev: user-space parallel port driver
[   13.246681] init: plymouth-splash main process (1124) terminated with status 1
[   13.297404] usb 1-1.4: new full-speed USB device number 3 using ehci_hcd
[   13.344187] [fglrx] ATIF platform detected with notification ID: 0x81
[   13.410850] Bluetooth: Generic Bluetooth USB driver ver 0.6
[   13.411661] usbcore: registered new interface driver btusb
[   13.876777] fglrx_pci 0000:02:00.0: irq 46 for MSI/MSI-X
[   13.877397] [fglrx] Firegl kernel thread PID: 1168
[   13.877448] [fglrx] Firegl kernel thread PID: 1169
[   13.877496] [fglrx] Firegl kernel thread PID: 1170
[   13.877585] [fglrx] IRQ 46 Enabled
[   13.967354] [fglrx] Gart USWC size:1216 M.
[   13.967357] [fglrx] Gart cacheable size:481 M.
[   13.967363] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[   13.967365] [fglrx] Reserved FB block: Unshared offset:f931000, size:3cf000
[   13.967367] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
[   14.187620] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
[   14.764927] atkbd serio0: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[   14.764931] atkbd serio0: Use 'setkeycodes e059 <keycode>' to make it known.
[   14.774744] atkbd serio0: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0).
[   14.774748] atkbd serio0: Use 'setkeycodes e059 <keycode>' to make it known.
[   14.919918] atkbd serio0: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[   14.919920] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
[   14.928799] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[   14.928803] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
[   15.144240] usb 1-1.4: USB disconnect, device number 3
[   15.144371] Bluetooth: hci0 urb ef3b8e40 submission failed
[   32.285318] audit_printk_skb: 36 callbacks suppressed
[   32.285321] type=1400 audit(1331287205.737:24): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/gvfs/remote-volume-monitors/" pid=1837 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[   93.227370] qtcreator[1928]: segfault at b ip b66e6005 sp a7a95a00 error 6 in libc-2.15.so[b65c7000+19e000]
[  145.338725] qtcreator[1991]: segfault at b ip b6682005 sp a7a58a00 error 6 in libc-2.15.so[b6563000+19e000]
[  198.492303] wlan0: authenticate with 00:22:6b:e3:db:5b (try 1)
[  198.494899] wlan0: authenticated
[  198.543935] wlan0: associate with 00:22:6b:e3:db:5b (try 1)
[  198.548474] wlan0: RX AssocResp from 00:22:6b:e3:db:5b (capab=0x431 status=0 aid=18)
[  198.548477] wlan0: associated
[  198.548752] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  198.548995] cfg80211: Calling CRDA for country: FR
[  198.556026] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[  198.556031] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  198.556034] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[  198.556037] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  198.556040] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[  198.556043] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  198.556045] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[  198.556048] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  198.556050] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[  198.556053] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  198.556056] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[  198.556059] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  198.556061] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[  198.556064] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  198.556067] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[  198.556070] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  198.556072] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[  198.556075] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  198.556077] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[  198.556080] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  198.556083] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[  198.556086] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  198.556088] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[  198.556091] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  198.556093] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[  198.556096] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  198.556099] cfg80211: Disabling freq 2484 MHz
[  198.556104] cfg80211: Regulatory domain changed to country: FR
[  198.556106] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  198.556109] cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  198.556111] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  198.556114] cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  198.556117] cfg80211:     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[  208.783963] wlan0: no IPv6 routers present
[  238.594208] wlan0: deauthenticating from 00:22:6b:e3:db:5b by local choice (reason=3)
[  238.774020] cfg80211: All devices are disconnected, going to restore regulatory settings
[  238.774027] cfg80211: Restoring regulatory settings
[  238.774039] cfg80211: Calling CRDA to update world regulatory domain
[  238.972172] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[  238.972177] cfg80211: World regulatory domain updated:
[  238.972179] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  238.972183] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  238.972186] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  238.972189] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  238.972192] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  238.972196] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  326.052988] wlan0: authenticate with 00:22:6b:e3:db:5b (try 1)
[  326.055641] wlan0: authenticated
[  326.080536] wlan0: associate with 00:22:6b:e3:db:5b (try 1)
[  326.085194] wlan0: RX ReassocResp from 00:22:6b:e3:db:5b (capab=0x431 status=0 aid=18)
[  326.085202] wlan0: associated
[  326.085604] cfg80211: Calling CRDA for country: FR
[  326.092649] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[  326.092653] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  326.092656] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[  326.092659] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  326.092662] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[  326.092665] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  326.092668] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[  326.092671] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  326.092673] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[  326.092677] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  326.092679] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[  326.092682] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  326.092685] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[  326.092688] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  326.092691] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[  326.092694] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  326.092697] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[  326.092700] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  326.092703] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[  326.092706] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  326.092709] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[  326.092713] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  326.092715] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[  326.092718] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  326.092721] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[  326.092725] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[  326.092728] cfg80211: Disabling freq 2484 MHz
[  326.092732] cfg80211: Regulatory domain changed to country: FR
[  326.092735] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  326.092738] cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  326.092741] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  326.092744] cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  326.092747] cfg80211:     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[  336.241853] wlan0: no IPv6 routers present
[  374.171179] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
[ 2335.667463] atkbd serio0: Unknown key pressed (translated set 2, code 0xf2 on isa0060/serio0).
[ 2335.667467] atkbd serio0: Use 'setkeycodes e072 <keycode>' to make it known.
[ 2335.676605] atkbd serio0: Unknown key released (translated set 2, code 0xf2 on isa0060/serio0).
[ 2335.676608] atkbd serio0: Use 'setkeycodes e072 <keycode>' to make it known.
[ 2676.015918] atkbd serio0: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[ 2676.015923] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
[ 2676.023239] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[ 2676.023245] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
[13239.794422] ACPI Error: [CB04] Namespace lookup failure, AE_ALREADY_EXISTS (20110623/dsfield-143)
[13239.794436] ACPI Error: Method parse/execution failed [\_SB_.AMW0.WMCA] (Node f742ed50), AE_ALREADY_EXISTS (20110623/psparse-536)
[13239.794507] ACPI: Marking method WMCA as Serialized because of AE_ALREADY_EXISTS error
[13240.361519] usb 1-1.4: new full-speed USB device number 4 using ehci_hcd
[13418.240069] usb 1-1.4: USB disconnect, device number 4
[15183.030928] cfg80211: All devices are disconnected, going to restore regulatory settings
[15183.030936] cfg80211: Restoring regulatory settings
[15183.030960] cfg80211: Calling CRDA to update world regulatory domain
[15183.039988] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[15183.039995] cfg80211: World regulatory domain updated:
[15183.039998] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[15183.040003] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[15183.040007] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[15183.040012] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[15183.040016] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[15183.040020] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[15198.093248] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[15237.514707] wlan0: authenticate with 00:22:6b:e3:db:5b (try 1)
[15237.711569] wlan0: authenticate with 00:22:6b:e3:db:5b (try 2)
[15237.911173] wlan0: authenticate with 00:22:6b:e3:db:5b (try 3)
[15238.110758] wlan0: authentication with 00:22:6b:e3:db:5b timed out
[15287.371387] wlan0: authenticate with 00:22:6b:e3:db:5b (try 1)
[15287.374090] wlan0: authenticated
[15287.374315] wlan0: associate with 00:22:6b:e3:db:5b (try 1)
[15287.378533] wlan0: RX ReassocResp from 00:22:6b:e3:db:5b (capab=0x431 status=0 aid=11)
[15287.378538] wlan0: associated
[15287.378814] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[15287.378955] cfg80211: Calling CRDA for country: FR
[15287.385542] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[15287.385546] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[15287.385548] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[15287.385550] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[15287.385552] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[15287.385554] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[15287.385556] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[15287.385559] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[15287.385560] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[15287.385563] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[15287.385564] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[15287.385567] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[15287.385569] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[15287.385571] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[15287.385573] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[15287.385575] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[15287.385577] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[15287.385579] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[15287.385581] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[15287.385583] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[15287.385585] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[15287.385587] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[15287.385589] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[15287.385591] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[15287.385593] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[15287.385595] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[15287.385597] cfg80211: Disabling freq 2484 MHz
[15287.385601] cfg80211: Regulatory domain changed to country: FR
[15287.385602] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[15287.385604] cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[15287.385606] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[15287.385608] cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[15287.385610] cfg80211:     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[15297.596308] wlan0: no IPv6 routers present
[15424.157479] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
[23477.664376] tg3 0000:03:00.0: PME# enabled
[23477.664397] tg3 0000:03:00.0: wake-up capability enabled by ACPI
[23477.832959] atkbd serio0: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[23477.832966] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
[23477.840752] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[23477.840758] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
[23477.879926] wlan0: deauthenticating from 00:22:6b:e3:db:5b by local choice (reason=3)
[23478.064349] cfg80211: All devices are disconnected, going to restore regulatory settings
[23478.064356] cfg80211: Restoring regulatory settings
[23478.064374] cfg80211: Calling CRDA to update world regulatory domain
[23478.072132] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[23478.072136] cfg80211: World regulatory domain updated:
[23478.072137] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[23478.072140] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[23478.072142] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[23478.072144] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[23478.072146] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[23478.072148] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[23481.536623] PM: Syncing filesystems ... done.
[23481.540839] PM: Preparing system for mem sleep
[23481.540861] Freezing user space processes ... (elapsed 0.01 seconds) done.
[23481.553952] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[23481.569920] PM: Entering mem sleep
[23481.569991] Suspending console(s) (use no_console_suspend to debug)
[23481.570341] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[23481.593593] [fglrx] IRQ 46 Disabled
[23481.593819] [fglrx] Preparing suspend fglrx in kernel.
[23481.617740] ehci_hcd 0000:00:1d.0: PCI INT A disabled
[23481.677678] ehci_hcd 0000:00:1a.0: PCI INT A disabled
[23481.693659] snd_hda_intel 0000:02:00.1: PCI INT B disabled
[23481.693691] ACPI handle has no context!
[23481.709605] PM: suspend of drv:snd_hda_intel dev:0000:02:00.1 complete after 116.384 msecs
[23481.736155] sd 0:0:0:0: [sda] Stopping disk
[23481.906072] snd_hda_intel 0000:00:1b.0: PCI INT A disabled
[23481.921186] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 323.896 msecs
[23482.099473] [fglrx] Suspending fglrx in kernel completed.
[23482.099476] [fglrx] Power down the ASIC .
[23482.099576] PM: suspend of drv:fglrx_pci dev:0000:02:00.0 complete after 507.121 msecs
[23482.099638] PM: suspend of drv:pcieport dev:0000:00:01.0 complete after 502.625 msecs
[23482.335954] PM: suspend of drv:sd dev:0:0:0:0 complete after 767.140 msecs
[23482.336044] PM: suspend of drv:scsi dev:target0:0:0 complete after 767.202 msecs
[23482.336073] PM: suspend of drv:scsi dev:host0 complete after 744.148 msecs
[23482.352377] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 756.044 msecs
[23482.352453] PM: suspend of drv: dev:pci0000:00 complete after 755.911 msecs
[23482.352517] PM: suspend of devices complete after 783.953 msecs
[23482.352520] PM: suspend devices took 0.784 seconds
[23482.368502] ehci_hcd 0000:00:1d.0: PME# enabled
[23482.368528] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
[23482.384353] ehci_hcd 0000:00:1a.0: PME# enabled
[23482.384391] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
[23482.416279] PM: late suspend of devices complete after 63.881 msecs
[23482.416601] ACPI: Preparing to enter system sleep state S3
[23482.676068] PM: Saving platform NVS memory
[23482.676824] Disabling non-boot CPUs ...
[23482.779479] CPU 1 is now offline
[23482.883298] CPU 2 is now offline
[23482.884404] Broke affinity for irq 9
[23482.884417] Broke affinity for irq 16
[23482.884423] Broke affinity for irq 17
[23482.955266] ACPI Exception: AE_BAD_PARAMETER, Returned by Handler for [EmbeddedControl] (20110623/evregion-478)
[23482.955276] ACPI Error: Method parse/execution failed [\_SB_.AMW0.WMCA] (Node f742ed50), AE_BAD_PARAMETER (20110623/psparse-536)
[23482.987091] CPU 3 is now offline
[23482.987529] Extended CMOS year: 2000
[23482.987731] ACPI: Low-level resume complete
[23482.987775] PM: Restoring platform NVS memory
[23482.988223] Extended CMOS year: 2000
[23482.988271] Enabling non-boot CPUs ...
[23482.988391] Booting Node 0 Processor 1 APIC 0x4
[23482.988392] smpboot cpu 1: start_ip = 98000
[23482.998579] Initializing CPU#1
[23482.999398] Calibrating delay loop (skipped) already calibrated this CPU
[23483.019743] NMI watchdog enabled, takes one hw-pmu counter.
[23483.020028] CPU1 is up
[23483.020100] Booting Node 0 Processor 2 APIC 0x1
[23483.020101] smpboot cpu 2: start_ip = 98000
[23483.030235] Initializing CPU#2
[23483.031108] Calibrating delay loop (skipped) already calibrated this CPU
[23483.051520] NMI watchdog enabled, takes one hw-pmu counter.
[23483.051812] CPU2 is up
[23483.051881] Booting Node 0 Processor 3 APIC 0x5
[23483.051882] smpboot cpu 3: start_ip = 98000
[23483.062016] Initializing CPU#3
[23483.062887] Calibrating delay loop (skipped) already calibrated this CPU
[23483.083432] NMI watchdog enabled, takes one hw-pmu counter.
[23483.083800] CPU3 is up
[23483.086818] ACPI: Waking up from system sleep state S3
[23483.818318] pcieport 0000:00:01.0: restoring config space at offset 0xf (was 0x80100, writing 0x8010b)
[23483.818327] pcieport 0000:00:01.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10010)
[23483.818330] pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100507)
[23483.818381] ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[23483.818395] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0606000)
[23483.818401] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102)
[23483.818432] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
[23483.818437] ehci_hcd 0000:00:1a.0: PME# disabled
[23483.818449] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x107)
[23483.818461] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0xdc000004, writing 0xf0600004)
[23483.818465] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[23483.818470] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100102)
[23483.818492] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x4010a)
[23483.818499] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xf011f001)
[23483.818503] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xf020f020)
[23483.818506] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x0, writing 0x3030)
[23483.818510] pcieport 0000:00:1c.0: restoring config space at offset 0x6 (was 0x0, writing 0x40300)
[23483.818515] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[23483.818520] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[23483.818544] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x4020b)
[23483.818552] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0xc011c001)
[23483.818555] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf030f030)
[23483.818559] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0x4040)
[23483.818562] pcieport 0000:00:1c.1: restoring config space at offset 0x6 (was 0x0, writing 0x50500)
[23483.818568] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[23483.818572] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[23483.818596] ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[23483.818610] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0607000)
[23483.818616] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102)
[23483.818641] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[23483.818645] ehci_hcd 0000:00:1d.0: PME# disabled
[23483.818652] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x40000, writing 0x400ff)
[23483.818660] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[23483.818664] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
[23483.818667] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
[23483.818675] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[23483.818723] ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x205)
[23483.818736] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[23483.818780] intel ips 0000:00:1f.6: restoring config space at offset 0xf (was 0x300, writing 0x30a)
[23483.818797] intel ips 0000:00:1f.6: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)
[23483.818821] fglrx_pci 0000:02:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b)
[23483.818830] fglrx_pci 0000:02:00.0: restoring config space at offset 0x8 (was 0x1, writing 0x2001)
[23483.818834] fglrx_pci 0000:02:00.0: restoring config space at offset 0x6 (was 0x4, writing 0xcfee0004)
[23483.818839] fglrx_pci 0000:02:00.0: restoring config space at offset 0x4 (was 0xc, writing 0xd000000c)
[23483.818843] fglrx_pci 0000:02:00.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800010)
[23483.818847] fglrx_pci 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x40100503)
[23483.818881] snd_hda_intel 0000:02:00.1: restoring config space at offset 0xf (was 0x2ff, writing 0x20a)
[23483.818893] snd_hda_intel 0000:02:00.1: restoring config space at offset 0x4 (was 0x4, writing 0xcfedc004)
[23483.818897] snd_hda_intel 0000:02:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x800010)
[23483.818901] snd_hda_intel 0000:02:00.1: restoring config space at offset 0x1 (was 0x100000, writing 0x40100103)
[23483.818989] tg3 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[23483.818995] tg3 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100106)
[23483.819033] ath9k 0000:05:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10a)
[23483.819052] ath9k 0000:05:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf0300004)
[23483.819056] ath9k 0000:05:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[23483.819063] ath9k 0000:05:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
[23483.819225] PM: early resume of devices complete after 0.968 msecs
[23483.819336] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[23483.819346] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[23483.819352] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[23483.819355] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[23483.819359] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[23483.819363] mei 0000:00:16.0: irq 42 for MSI/MSI-X
[23483.819366] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[23483.819380] pci 0000:00:1e.0: setting latency timer to 64
[23483.819395] snd_hda_intel 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[23483.819399] ahci 0000:00:1f.2: setting latency timer to 64
[23483.819404] snd_hda_intel 0000:02:00.1: setting latency timer to 64
[23483.819420] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[23483.819449] tg3 0000:03:00.0: wake-up capability disabled by ACPI
[23483.819487] tg3 0000:03:00.0: PME# disabled
[23483.819504] fglrx_pci 0000:02:00.0: setting latency timer to 64
[23483.819518] snd_hda_intel 0000:02:00.1: irq 44 for MSI/MSI-X
[23483.824273] [fglrx] Power up the ASIC
[23483.824322] [fglrx] Preparing resume fglrx in kernel.
[23483.826073] sd 0:0:0:0: [sda] Starting disk
[23483.939240] [fglrx] Resuming fglrx in kernel completed.
[23483.939361] [fglrx] IRQ 46 Enabled
[23483.939367] PM: resume of drv:fglrx_pci dev:0000:02:00.0 complete after 120.217 msecs
[23483.997791] PM: resume of drv:hub dev:2-1:1.0 complete after 167.951 msecs
[23483.997797] PM: resume of drv: dev:ep_00 complete after 167.872 msecs
[23483.997811] PM: resume of drv: dev:ep_81 complete after 167.937 msecs
[23484.050505] PM: resume of drv:usbhid dev:2-1.1:1.0 complete after 220.614 msecs
[23484.050515] PM: resume of drv: dev:ep_00 complete after 220.492 msecs
[23484.050528] PM: resume of drv:usbhid dev:2-1.1:1.1 complete after 220.557 msecs
[23484.050535] PM: resume of drv: dev:ep_81 complete after 220.616 msecs
[23484.050541] PM: resume of drv: dev:ep_82 complete after 220.565 msecs
[23484.069768] usb 2-1.5: reset high-speed USB device number 4 using ehci_hcd
[23484.141505] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[23484.144928] ata5.00: configured for UDMA/100
[23484.253453] PM: resume of drv:uvcvideo dev:2-1.5:1.0 complete after 423.782 msecs
[23484.253462] PM: resume of drv:uvcvideo dev:2-1.5:1.1 complete after 423.732 msecs
[23484.253473] PM: resume of drv: dev:ep_00 complete after 423.707 msecs
[23484.253479] PM: resume of drv: dev:ep_83 complete after 423.784 msecs
[23486.385025] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[23486.452992] PM: resume of drv:battery dev:PNP0C0A:00 complete after 2638.907 msecs
[23486.558869] ata1.00: configured for UDMA/133
[23486.576607] PM: resume of drv:sd dev:0:0:0:0 complete after 2756.011 msecs
[23486.576630] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2755.990 msecs
[23486.633886] PM: resume of devices complete after 2820.236 msecs
[23486.633950] PM: resume devices took 2.820 seconds
[23486.633977] PM: Finishing wakeup.
[23486.633979] Restarting tasks ... done.
[23486.635611] video LNXVIDEO:00: Restoring backlight state
[23487.572262] tg3 0000:03:00.0: irq 45 for MSI/MSI-X
[23487.584922] ADDRCONF(NETDEV_UP): eth0: link is not ready
[23487.585343] ADDRCONF(NETDEV_UP): eth0: link is not ready
[23487.664647] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[23488.581646] tg3 0000:03:00.0: eth0: Link is down
[23490.503378] wlan0: authenticate with 00:1a:2b:0d:c6:9a (try 1)
[23490.506808] wlan0: authenticated
[23490.531744] wlan0: associate with 00:1a:2b:0d:c6:9a (try 1)
[23490.534658] wlan0: RX AssocResp from 00:1a:2b:0d:c6:9a (capab=0x411 status=0 aid=1)
[23490.534663] wlan0: associated
[23490.535042] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[23500.979913] wlan0: no IPv6 routers present
[23604.908697] usb 1-1.2: new high-speed USB device number 5 using ehci_hcd
[23605.048115] Initializing USB Mass Storage driver...
[23605.048332] scsi5 : usb-storage 1-1.2:1.3
[23605.048580] usbcore: registered new interface driver usb-storage
[23605.048583] USB Mass Storage support registered.
[23605.207169] cdc_acm 1-1.2:1.0: This device cannot do calls on its own. It is not a modem.
[23605.207245] cdc_acm 1-1.2:1.0: ttyACM0: USB ACM device
[23605.208269] usbcore: registered new interface driver cdc_acm
[23605.208273] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[23606.047756] scsi 5:0:0:0: Direct-Access     SAMSUNG  GT-B7510 Card    ffff PQ: 0 ANSI: 2
[23606.048790] sd 5:0:0:0: Attached scsi generic sg2 type 0
[23606.051460] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[23896.816629] type=1400 audit(1331323283.377:25): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=23306 comm="apparmor_parser"
[23896.817060] type=1400 audit(1331323283.377:26): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=23306 comm="apparmor_parser"
[23896.946731] type=1400 audit(1331323283.509:27): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=23342 comm="apparmor_parser"
[23896.947541] type=1400 audit(1331323283.509:28): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=23342 comm="apparmor_parser"
[23915.456377] type=1400 audit(1331323302.051:29): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=23827 comm="apparmor_parser"
[23915.456497] type=1400 audit(1331323302.051:30): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=23827 comm="apparmor_parser"
[23915.456578] type=1400 audit(1331323302.051:31): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=23827 comm="apparmor_parser"
[23933.631640] type=1400 audit(1331323320.263:32): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/tcpdump" pid=24625 comm="apparmor_parser"
[23949.865037] type=1400 audit(1331323336.527:33): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince" pid=24752 comm="apparmor_parser"
[23949.866057] type=1400 audit(1331323336.527:34): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince//launchpad_integration" pid=24752 comm="apparmor_parser"
[23949.866426] type=1400 audit(1331323336.531:35): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince//sanitized_helper" pid=24752 comm="apparmor_parser"
[23949.867321] type=1400 audit(1331323336.531:36): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-previewer" pid=24752 comm="apparmor_parser"
[23949.868002] type=1400 audit(1331323336.531:37): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-previewer//launchpad_integration" pid=24752 comm="apparmor_parser"
[23949.868335] type=1400 audit(1331323336.531:38): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-previewer//sanitized_helper" pid=24752 comm="apparmor_parser"
[23949.869030] type=1400 audit(1331323336.531:39): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-thumbnailer" pid=24752 comm="apparmor_parser"
[23949.869520] type=1400 audit(1331323336.531:40): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=24752 comm="apparmor_parser"
[24010.181576] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[24010.183069] SGI XFS Quota Management subsystem
[24010.204940] JFS: nTxBlock = 8192, nTxLock = 65536
[24010.226734] NTFS driver 2.1.30 [Flags: R/O MODULE].
[24010.255638] QNX4 filesystem 0.2.3 registered.
[24010.317955] Btrfs loaded
[24034.409312] init: modemmanager main process (27442) terminated with status 255
[24034.409376] init: modemmanager main process ended, respawning
[24034.420655] init: modemmanager main process (27445) terminated with status 255
[24034.420717] init: modemmanager main process ended, respawning
[24034.432854] init: modemmanager main process (27447) terminated with status 255
[24034.432902] init: modemmanager main process ended, respawning
[24034.443034] init: modemmanager main process (27449) terminated with status 255
[24034.443058] init: modemmanager main process ended, respawning
[24034.453557] init: modemmanager main process (27451) terminated with status 255
[24034.453590] init: modemmanager main process ended, respawning
[24034.462763] init: modemmanager main process (27453) terminated with status 255
[24034.462804] init: modemmanager main process ended, respawning
[24034.470680] init: modemmanager main process (27455) terminated with status 255
[24034.470713] init: modemmanager main process ended, respawning
[24034.479887] init: modemmanager main process (27457) terminated with status 255
[24034.479944] init: modemmanager main process ended, respawning
[24034.490628] init: modemmanager main process (27459) terminated with status 255
[24034.490652] init: modemmanager main process ended, respawning
[24034.500024] init: modemmanager main process (27461) terminated with status 255
[24034.500049] init: modemmanager main process ended, respawning
[24034.509419] init: modemmanager main process (27463) terminated with status 255
[24034.509442] init: modemmanager respawning too fast, stopped
[24070.468972] udevd[27662]: starting version 175
[24077.340132] type=1400 audit(1331323464.255:41): apparmor="STATUS" operation="profile_replace" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=27795 comm="apparmor_parser"
[24077.649939] type=1400 audit(1331323464.567:42): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=27796 comm="apparmor_parser"
[24077.650103] type=1400 audit(1331323464.567:43): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=27796 comm="apparmor_parser"
[24077.650219] type=1400 audit(1331323464.567:44): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=27796 comm="apparmor_parser"
[24078.033680] type=1400 audit(1331323464.951:45): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/tcpdump" pid=27802 comm="apparmor_parser"
[24078.321021] type=1400 audit(1331323465.239:46): apparmor="STATUS" operation="profile_replace" name="/usr/lib/telepathy/mission-control-5" pid=27799 comm="apparmor_parser"
[24078.321459] type=1400 audit(1331323465.239:47): apparmor="STATUS" operation="profile_replace" name="/usr/lib/telepathy/telepathy-*" pid=27799 comm="apparmor_parser"
[24078.354661] type=1400 audit(1331323465.275:48): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=27800 comm="apparmor_parser"
[24078.354965] type=1400 audit(1331323465.275:49): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=27800 comm="apparmor_parser"
[24086.305529] type=1400 audit(1331323473.239:50): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince" pid=27797 comm="apparmor_parser"
[24086.306591] type=1400 audit(1331323473.243:51): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince//launchpad_integration" pid=27797 comm="apparmor_parser"
[24086.306945] type=1400 audit(1331323473.243:52): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince//sanitized_helper" pid=27797 comm="apparmor_parser"
[24086.307887] type=1400 audit(1331323473.243:53): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-previewer" pid=27797 comm="apparmor_parser"
[24086.308626] type=1400 audit(1331323473.243:54): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-previewer//launchpad_integration" pid=27797 comm="apparmor_parser"
[24086.308955] type=1400 audit(1331323473.243:55): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-previewer//sanitized_helper" pid=27797 comm="apparmor_parser"
[24086.309648] type=1400 audit(1331323473.243:56): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-thumbnailer" pid=27797 comm="apparmor_parser"
[24086.310108] type=1400 audit(1331323473.243:57): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=27797 comm="apparmor_parser"
[24086.669060] type=1400 audit(1331323473.603:58): apparmor="STATUS" operation="profile_replace" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=27846 comm="apparmor_parser"
[24087.087763] type=1400 audit(1331323474.023:59): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=27847 comm="apparmor_parser"
[24095.707006] audit_printk_skb: 21 callbacks suppressed
[24095.707009] type=1400 audit(1331323482.659:67): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince" pid=27848 comm="apparmor_parser"
[24095.708282] type=1400 audit(1331323482.663:68): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince//launchpad_integration" pid=27848 comm="apparmor_parser"
[24095.708615] type=1400 audit(1331323482.663:69): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince//sanitized_helper" pid=27848 comm="apparmor_parser"
[24095.709549] type=1400 audit(1331323482.663:70): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-previewer" pid=27848 comm="apparmor_parser"
[24095.710217] type=1400 audit(1331323482.663:71): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-previewer//launchpad_integration" pid=27848 comm="apparmor_parser"
[24095.710543] type=1400 audit(1331323482.663:72): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-previewer//sanitized_helper" pid=27848 comm="apparmor_parser"
[24095.711210] type=1400 audit(1331323482.663:73): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-thumbnailer" pid=27848 comm="apparmor_parser"
[24095.711675] type=1400 audit(1331323482.663:74): apparmor="STATUS" operation="profile_replace" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=27848 comm="apparmor_parser"




Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 10 Mart 2012 - 10:42:52

İlginç iki ayrıntı daha keşfettim.

Birincisi, Ubuntu dağıtımlarının tümünde yaşadığım bu fare takılması ve internet yavaşlığı sorunu AZTECH HW-550 3G marka-model modeme bağlanınca kesinlikle gerçekleşmekte. Sürekli netim yavaş ve fare takılarak hareket etmekte. Bunun haricinde 3 ya da 4 adet modemle daha denedim, hiç bir sıkıntım yok.

İkincisi, internetim eğer yavaş ve sıkıntılıysa, faredeki takılarak hareket etme sorunu hemen kendini gösteriyor.

if

#7
10 Mart 2012 - 12:00:31
@canavaroski90, o zaman sıkıntı yaşatmayan modemlerden birini kullanmanız gerek.

canavaroski90

#8
10 Mart 2012 - 14:31:11
Alıntı yapılan: if - 10 Mart 2012 - 12:00:31
@canavaroski90, o zaman sıkıntı yaşatmayan modemlerden birini kullanmanız gerek.

Cevabınız için teşekkürler. Benim açımdan biraz kumar oynamak gibi olacak, farklı yerlerde sürekli farklı modemlere bağlanarak çalışmam gerekmekte. Ancak sorun 11.10'da da kendini göstermişti. ama anlamadığım, internet yavaşken fare neden sapıtıyor?

++ Ayrıca şunu farkettim ki, 20Mbps hızında internete bağlanabilirken windows 7'de (ve yanımdaki yaklaşık 3-4 kişi de buna dahil olmak üzere), Ubuntuya geçtiğimde resmen internet çöküyor. Sadece bende değil, çevremdekilerin internet hızı bile 0.5 - 1Mbps arasında değişiyor. Neredeyse 20-40 kat düşüyor hızımız. Yani benim ubuntudan kablosuz ağa bağlanarak internete erişmem bütün interneti kitliyor. Birkaç kez denedim bunu, aynı sıkıntı sürekli baş göstermekte.  Bu sıkıntının sebebi ne olabilir?

if

#9
10 Mart 2012 - 15:00:04
@canavaroski90,
Kod Seç
echo "options ath9k nohwcrypt=1" | sudo tee /etc/modprobe.d/ath9k.conf
sudo modprobe -r ath9k
sudo modprobe ath9k komutlarını uygulayınca durum nedir?

canavaroski90

#10
10 Mart 2012 - 15:39:09 Son düzenlenme: 10 Mart 2012 - 15:57:18 canavaroski90
Deniyorum birazdan..


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 10 Mart 2012 - 15:57:18

Sanırım düzeldi. Fare sıkıntısı da gözlemlemedim. Komple düzene girdi sistem. Çok çok teşekkür ederim bu kadar vakit ayırdığınız için. Bir ricam olacak, sorunumu tahmin edip düzeltebildiğinize göre sıkıntıyı bildiğinizi düşünmekteyim, acaba bu sıkıntı neymiş? Biraz teknik bilgi vermeniz mümkün müdür? Şu kurak beynime birkaç damla su dökseniz ? :)

if

#11
10 Mart 2012 - 20:09:58
@canavaroski90, kablosuz kartın kullandığı ath9k modülünü "donanım şifrelemesi" olmadan çalıştırmış olduk. /etc/modprobe.d/ath9k.conf dosyayı sistemin her açılışında okunacak ve oraya girdiğimiz parametreyle başlatılacak modül. Kullandığınız kablosuz kartlarında sık görülen bir sorun bu.

Ayrıntılı bilgi için:
Kod Seç
modinfo ath9k ve http://linux.die.net/man/5/modprobe.d

Çözüldü etiketi için: http://forum.ubuntu-tr.net/index.php?topic=2917.0

canavaroski90

#12
10 Mart 2012 - 20:24:01
Alıntı yapılan: if - 10 Mart 2012 - 20:09:58
@canavaroski90, kablosuz kartın kullandığı ath9k modülünü "donanım şifrelemesi" olmadan çalıştırmış olduk. /etc/modprobe.d/ath9k.conf dosyayı sistemin her açılışında okunacak ve oraya girdiğimiz parametreyle başlatılacak modül. Kullandığınız kablosuz kartlarında sık görülen bir sorun bu.

Ayrıntılı bilgi için:
Kod Seç
modinfo ath9k ve http://linux.die.net/man/5/modprobe.d

Çözüldü etiketi için: http://forum.ubuntu-tr.net/index.php?topic=2917.0
Cevabınız için tekrar teşekkürler. Kusuruma bakmayın ancak biraz bilgiye aç bir insanım :). Vaktiniz varsa bana neden donanım şifrelemesi gerektiğini, ne işe yaradığını, ubuntuda neden kapattığımızı, neden sıkıntı yarattığını biraz (çok kısa cümlelerle) açıklayabilir misiniz? Eğer vaktim yok derseniz kaynak önerebilir misiniz? Onuda öneremem derseniz en azından arama motorlarında bu konuda araştırma yapabilmem için anahtar kelime önerebilir misiniz? 

Tekrar tekrar teşekkür ediyorum. Cevap yazdığınız anda (konu kilitlenmesin diye) konuya Çözüldü etiketi yapıştıracağım.

if

#13
10 Mart 2012 - 20:38:06 Son düzenlenme: 10 Mart 2012 - 20:59:09 if
:) O kadar bilgim yok @canavaroski90. Donanım şifrelemesi etkin olduğu zaman cfg80211 modülü bir kaç kez "World regulatory domain"i güncellemeye çalışıyor1. Sanırım her ülkenin kendi "regulatory domain"i var. Bu modül Zengibar için ayarlanmış olarak geliyorsa, Türkiye'de çalışmada sıkıntı yaşıyor sanki. Bunlar benim yorumum sadece. Nereye bakılır onu da bilmiyorum.

1
Kod Seç
[23478.064349] cfg80211: All devices are disconnected, going to restore regulatory settings
[23478.064356] cfg80211: Restoring regulatory settings
[23478.064374] cfg80211: Calling CRDA to update world regulatory domain
[23478.072132] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[23478.072136] cfg80211: World regulatory domain updated:
[23478.072137] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[23478.072140] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[23478.072142] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[23478.072144] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[23478.072146] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[23478.072148] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

canavaroski90

#14
10 Mart 2012 - 21:23:34
Tekrar tekrar teşekkürler. Ben biraz araştırayım. Etiketliyorum konuyu..

if

#15
10 Mart 2012 - 21:38:01
Rica ederim:)
Yazdır
Yukarı git Sayfa1
Kullanıcı Eylemleri