[Çözüldü] Conky Lua Hava Durumu ve CPU Sıcaklığı Ayarlama

[noktakom]

http://www.webupd8.org/2011/02/try-this-great-looking-conky-lua.html

Linkteki aracı kullanmaya başladım da Hava Durumu ayarlarının nasıl yapılacağını tam anlayadım. Bir de hava durumu bilgilerini aldığı site çok uzun aralıklarla güncelleniyor, bilgileri farklı bir yerden almasını sağlayabilir miyiz? meteoroloji veya google gibi..

Alternatif olarak ilgili bölgede "Hava Durumu" yerine PC sıcaklığını nasıl göstertebiliriz?

[alquirel]

Sadece hava durumu bölgesini ayarlama konusunda cevap verebilirim, diğer soruların konusunda pek bi bilgim yok.

http://weather.noaa.gov/ sitesine girdikten sonra Türkiye'yi ve bulunduğun ili seçtiğin zaman adresin şöyle bir şey olduğunu göreceksin.
Mesela Erzurum için : http://weather.noaa.gov/weather/current/LTCE.html

Burada Erzurum'un kodu sondaki büyük harfler oluyor. Yani LTCE.
Bunu da .conkyrc dosyası içerisinde hava durumu ile ilgili kısma yazman gerekiyor.

Yani şu kısmı bulup LQBK yazan yeri değiştirin.

Kod Seç Genişlet


{weather http://weather.noaa.gov/pub/data/observations/metar/stations/ LQBK temperature temperature 30}


[noktakom]

Teşekkürler, oldu.

İzniniz olursa konuyu şimdilik etiketlemeyelim. Diğer sorular hakkında bilgisi olan varsa, belki bir şeyler yazar.

[alquirel]

Tabii ki, zaten başlığı açandan onay gelmedikçe konuyu kilitlemeyiz

[if]

Sıcaklık için:

Kod Seç Genişlet

${hwmon temp sayı} kullanılabilir. ~/.conkyrc. dosyanız konusuna bakılabilir.

[Sherlock Holmes]

PC sıcaklığını nasıl göstertebiliriz?

PC, birçok donanım birimlerinden/bileşenlerinden oluştuğu için tam olarak neyin sıcaklığını öğrenmek istediğinizi merak ettim.

Kod Seç Genişlet

acpi -V
çıktınızı buraya [/#] ile aktarırmısınız.?

[noktakom]

Tek cpu sıcaklığını gösteriyor bende.

Kod Seç Genişlet

$ acpi -V
Battery 0: Unknown, 95%
Battery 0: design capacity 3840 mAh, last full capacity 3215 mAh = 83%
Adapter 0: on-line
Thermal 0: ok, 56.0 degrees C
Thermal 0: trip point 0 switches to mode critical at temperature 90.0 degrees C
Thermal 0: trip point 1 switches to mode passive at temperature 87.0 degrees C
Cooling 0: LCD 13 of 15
Cooling 1: Processor 0 of 10
Cooling 2: Processor 0 of 10


Bu da .conkyrc dosyam

Kod Seç Genişlet

# Conky settings #
background no
update_interval 1

cpu_avg_samples 2
net_avg_samples 2

override_utf8_locale yes

double_buffer yes
no_buffers yes

text_buffer_size 2048
#imlib_cache_size 0

temperature_unit fahrenheit

# Window specifications #

own_window yes
own_window_type override
own_window_transparent yes
own_window_hints undecorate,sticky,skip_taskbar,skip_pager,below

border_inner_margin 0
border_outer_margin 0

minimum_size 200 250
maximum_width 200

alignment tr
gap_x 35
gap_y 55

# Graphics settings #
draw_shades no
draw_outline no
draw_borders no
draw_graph_borders no

# Text settings #
use_xft yes
xftfont caviar dreams:size=8
xftalpha 0.5

uppercase no

temperature_unit celsius


default_color FFFFFF

# Lua Load  #
lua_load ~/.lua/scripts/clock_rings.lua
lua_draw_hook_pre clock_rings

TEXT
${voffset 8}${color FF6600}${font caviar dreams:size=16}${time %A}${font}${voffset -8}${alignr 50}${color FFFFFF}${font caviar dreams:size=38}${time %e}${font}
${color FFFFFF}${voffset -30}${color FFFFFF}${font caviar dreams:size=18}${time %b}${font}${voffset -3} ${color FFFFFF}${font caviar dreams:size=20}${time %Y}${font}${color FF6600}${hr}
${voffset 140}${font caviar dreams:size=10}${alignr}İstanbul${font}
${font caviar dreams:size=12}${color FFFFFF}${alignr}${weather http://weather.noaa.gov/pub/data/observations/metar/stations/ LTBA temperature temperature 30} °C${font}
${image ~/.conky/new-ubuntu-logo.png -p 64,125 -s 70x20}

${color FFFFFF}${goto 25}${voffset 35}${cpu cpu0}%
${color FF6600}${goto 25}CPU
${color FFFFFF}${goto 50}${voffset 23}${memperc}%
${color FF6600}${goto 50}RAM
${color FFFFFF}${goto 75}${voffset 23}${swapperc}%
${color FF6600}${goto 75}Swap
${color FFFFFF}${goto 100}${voffset 23}${fs_used_perc /}%
${color FF6600}${goto 100}Disk
${color FFFFFF}${goto 125}${voffset 25}${downspeed wlan0}
${color FFFFFF}${goto 125}${upspeed wlan0}
${color FF6600}${goto 125}Net



${color FFFFFF}${font caviar dreams:size=8}Uptime: ${uptime_short}
${color FFFFFF}${font caviar dreams:size=8}Processes: ${processes}
${color FFFFFF}${font caviar dreams:size=8}Running: ${running_processes}


${color FF6600}${font caviar dreams:size=8}${alignr}${nodename}
${color FF6600}${font caviar dreams:size=8}${alignr}${pre_exec cat /etc/issue.net}  $machine
${color FF6600}${font caviar dreams:size=8}${alignr}Kernel: ${kernel}


Bir de yeni bir sorun daha gözüme çarptı. Araç internet hızlarını sadece yazıyla/ sayıyla gösteriyor, o yaylı görsel bölümde hareket yok.

[if]

Kod Seç Genişlet

man conky

[alquirel]

Kod Seç Genişlet


${color FFFFFF}${goto 125}${voffset 25}${downspeed wlan0}
${color FFFFFF}${goto 125}${upspeed wlan0}
${color FF6600}${goto 125}Net


Bir de yeni bir sorun daha gözüme çarptı. Araç internet hızlarını sadece yazıyla/ sayıyla gösteriyor, o yaylı görsel bölümde hareket yok.

Burada yazı olan kısmın wlan0 aygıtını dinlediği gözüküyor, yaylı kısımlar için aynı değişikliği .lua dosyası içinde de yapman gerek.

[noktakom]

Hepinize teşekkür ederim, gerekli düzenlemeleri yaptım. Şu an sorun gözükmüyor. Dosyaların son halleri şöyle oldu. Kullanmak isteyen olabilir diye ekliyorum.

Arkaplan: http://img215.imageshack.us/img215/5254/bp9b.jpg



.conkyrc

Kod Seç Genişlet

# Conky settings #
background no
update_interval 1

cpu_avg_samples 2
net_avg_samples 2

override_utf8_locale yes

double_buffer yes
no_buffers yes

text_buffer_size 2048
#imlib_cache_size 0

temperature_unit fahrenheit

# Window specifications #

own_window yes
own_window_type override
own_window_transparent yes
own_window_hints undecorate,sticky,skip_taskbar,skip_pager,below

border_inner_margin 0
border_outer_margin 0

minimum_size 200 250
maximum_width 200

alignment tr
gap_x 35
gap_y 55

# Graphics settings #
draw_shades no
draw_outline no
draw_borders no
draw_graph_borders no

# Text settings #
use_xft yes
xftfont caviar dreams:size=8
xftalpha 0.5

uppercase no

temperature_unit celsius


default_color FFFFFF

# Lua Load  #
lua_load ~/.lua/scripts/clock_rings.lua
lua_draw_hook_pre clock_rings

TEXT
${voffset 8}${color FF6600}${font caviar dreams:size=16}${time %A}${font}${voffset -8}${alignr 50}${color FFFFFF}${font caviar dreams:size=38}${time %e}${font}
${color FFFFFF}${voffset -30}${color FFFFFF}${font caviar dreams:size=18}${time %b}${font}${voffset -3} ${color FFFFFF}${font caviar dreams:size=20}${time %Y}${font}${color FF6600}${hr}
${voffset 140}${font caviar dreams:size=10}${alignr}İstanbul${font}
${font caviar dreams:size=12}${color FFFFFF}${alignr}${weather http://weather.noaa.gov/pub/data/observations/metar/stations/ LTBA temperature temperature 30} °C${font}
${image ~/.conky/new-ubuntu-logo.png -p 64,125 -s 70x20}

${color FFFFFF}${goto 25}${voffset 35}${cpu cpu0}%
${color FF6600}${goto 25}CPU
${color FFFFFF}${goto 50}${voffset 23}${memperc}%
${color FF6600}${goto 50}RAM
${color FFFFFF}${goto 75}${voffset 23}${swapperc}%
${color FF6600}${goto 75}Swap
${color FFFFFF}${goto 100}${voffset 23}${fs_used_perc /}%
${color FF6600}${goto 100}Disk
${color FFFFFF}${goto 125}${voffset 25}${downspeed wlan0}
${color FFFFFF}${goto 125}${upspeed wlan0}
${color FF6600}${goto 125}Net



${color FFFFFF}${font caviar dreams:size=8}Uptime: ${uptime_short}
${color FFFFFF}${font caviar dreams:size=8}Processes: ${processes}
${color FFFFFF}${font caviar dreams:size=8}Running: ${running_processes}


${color FF6600}${font caviar dreams:size=8}${alignr}${nodename}
${color FF6600}${font caviar dreams:size=8}${alignr}${pre_exec cat /etc/issue.net}  $machine
${color FF6600}${font caviar dreams:size=8}${alignr}Kernel: ${kernel}

${color FFFFFF}${font caviar dreams:size=10}${alignr}Cpu Temp: ${acpitemp} °C

clock_rings.lua

Kod Seç Genişlet

--[[
Clock Rings by Linux Mint (2011) reEdited by despot77

This script draws percentage meters as rings, and also draws clock hands if you want! It is fully customisable; all options are described in the script. This script is based off a combination of my clock.lua script and my rings.lua script.

IMPORTANT: if you are using the 'cpu' function, it will cause a segmentation fault if it tries to draw a ring straight away. The if statement on line 145 uses a delay to make sure that this doesn't happen. It calculates the length of the delay by the number of updates since Conky started. Generally, a value of 5s is long enough, so if you update Conky every 1s, use update_num>5 in that if statement (the default). If you only update Conky every 2s, you should change it to update_num>3; conversely if you update Conky every 0.5s, you should use update_num>10. ALSO, if you change your Conky, is it best to use "killall conky; conky" to update it, otherwise the update_num will not be reset and you will get an error.

To call this script in Conky, use the following (assuming that you save this script to ~/scripts/rings.lua):
    lua_load ~/scripts/clock_rings.lua
    lua_draw_hook_pre clock_rings
   
Changelog:
+ v1.0 -- Original release (30.09.2009)
   v1.1p -- Jpope edit londonali1010 (05.10.2009)
*v 2011mint -- reEdit despot77 (18.02.2011)
]]

settings_table = {
    {
        -- Edit this table to customise your rings.
        -- You can create more rings simply by adding more elements to settings_table.
        -- "name" is the type of stat to display; you can choose from 'cpu', 'memperc', 'fs_used_perc', 'battery_used_perc'.
        name='time',
        -- "arg" is the argument to the stat type, e.g. if in Conky you would write ${cpu cpu0}, 'cpu0' would be the argument. If you would not use an argument in the Conky variable, use ''.
        arg='%I.%M',
        -- "max" is the maximum value of the ring. If the Conky variable outputs a percentage, use 100.
        max=12,
        -- "bg_colour" is the colour of the base ring.
        bg_colour=0xffffff,
        -- "bg_alpha" is the alpha value of the base ring.
        bg_alpha=0.1,
        -- "fg_colour" is the colour of the indicator part of the ring.
        fg_colour=0xFF6600,
        -- "fg_alpha" is the alpha value of the indicator part of the ring.
        fg_alpha=0.2,
        -- "x" and "y" are the x and y coordinates of the centre of the ring, relative to the top left corner of the Conky window.
        x=100, y=150,
        -- "radius" is the radius of the ring.
        radius=50,
        -- "thickness" is the thickness of the ring, centred around the radius.
        thickness=5,
        -- "start_angle" is the starting angle of the ring, in degrees, clockwise from top. Value can be either positive or negative.
        start_angle=0,
        -- "end_angle" is the ending angle of the ring, in degrees, clockwise from top. Value can be either positive or negative, but must be larger than start_angle.
        end_angle=360
    },
    {
        name='time',
        arg='%M.%S',
        max=60,
        bg_colour=0xffffff,
        bg_alpha=0.1,
        fg_colour=0xFF6600,
        fg_alpha=0.4,
        x=100, y=150,
        radius=56,
        thickness=5,
        start_angle=0,
        end_angle=360
    },
    {
        name='time',
        arg='%S',
        max=60,
        bg_colour=0xffffff,
        bg_alpha=0.1,
        fg_colour=0xFF6600,
        fg_alpha=0.6,
        x=100, y=150,
        radius=62,
        thickness=5,
        start_angle=0,
        end_angle=360
    },
    {
        name='time',
        arg='%d',
        max=31,
        bg_colour=0xffffff,
        bg_alpha=0.1,
        fg_colour=0xFF6600,
        fg_alpha=0.8,
        x=100, y=150,
        radius=70,
        thickness=5,
        start_angle=-90,
        end_angle=90
    },
    {
        name='time',
        arg='%m',
        max=12,
        bg_colour=0xffffff,
        bg_alpha=0.1,
        fg_colour=0xFF6600,
        fg_alpha=1,
        x=100, y=150,
        radius=76,
        thickness=5,
        start_angle=-90,
        end_angle=90
    },
    {
        name='cpu',
        arg='cpu0',
        max=100,
        bg_colour=0xffffff,
        bg_alpha=0.2,
        fg_colour=0xFF6600,
        fg_alpha=0.8,
        x=50, y=300,
        radius=25,
        thickness=5,
        start_angle=-90,
        end_angle=180
    },
    {
        name='memperc',
        arg='',
        max=100,
        bg_colour=0xffffff,
        bg_alpha=0.2,
        fg_colour=0xFF6600,
        fg_alpha=0.8,
        x=75, y=350,
        radius=25,
        thickness=5,
        start_angle=-90,
        end_angle=180
    },
    {
        name='swapperc',
        arg='',
        max=100,
        bg_colour=0xffffff,
        bg_alpha=0.2,
        fg_colour=0xFF6600,
        fg_alpha=0.8,
        x=100, y=400,
        radius=25,
        thickness=5,
        start_angle=-90,
        end_angle=180
    },
    {
        name='fs_used_perc',
        arg='/',
        max=100,
        bg_colour=0xffffff,
        bg_alpha=0.2,
        fg_colour=0xFF6600,
        fg_alpha=0.8,
        x=125, y=450,
        radius=25,
        thickness=5,
        start_angle=-90,
        end_angle=180
    },
        {
        name='downspeedf',
        arg='wlan0',
        max=1000,
        bg_colour=0xffffff,
        bg_alpha=0.2,
        fg_colour=0x339900,
        fg_alpha=0.8,
        x=150, y=500,
        radius=25,
        thickness=4,
        start_angle=-90,
        end_angle=180
    },
        {
        name='upspeedf',
        arg='wlan0',
        max=100,
        bg_colour=0xffffff,
        bg_alpha=0.2,
        fg_colour=0xff6600,
        fg_alpha=0.8,
        x=150, y=500,
        radius=20,
        thickness=4,
        start_angle=-90,
        end_angle=180
    },
}

-- Use these settings to define the origin and extent of your clock.

clock_r=65

-- "clock_x" and "clock_y" are the coordinates of the centre of the clock, in pixels, from the top left of the Conky window.

clock_x=100
clock_y=150

show_seconds=true

require 'cairo'

function rgb_to_r_g_b(colour,alpha)
    return ((colour / 0x10000) % 0x100) / 255., ((colour / 0x100) % 0x100) / 255., (colour % 0x100) / 255., alpha
end

function draw_ring(cr,t,pt)
    local w,h=conky_window.width,conky_window.height
   
    local xc,yc,ring_r,ring_w,sa,ea=pt['x'],pt['y'],pt['radius'],pt['thickness'],pt['start_angle'],pt['end_angle']
    local bgc, bga, fgc, fga=pt['bg_colour'], pt['bg_alpha'], pt['fg_colour'], pt['fg_alpha']

    local angle_0=sa*(2*math.pi/360)-math.pi/2
    local angle_f=ea*(2*math.pi/360)-math.pi/2
    local t_arc=t*(angle_f-angle_0)

    -- Draw background ring

    cairo_arc(cr,xc,yc,ring_r,angle_0,angle_f)
    cairo_set_source_rgba(cr,rgb_to_r_g_b(bgc,bga))
    cairo_set_line_width(cr,ring_w)
    cairo_stroke(cr)
   
    -- Draw indicator ring

    cairo_arc(cr,xc,yc,ring_r,angle_0,angle_0+t_arc)
    cairo_set_source_rgba(cr,rgb_to_r_g_b(fgc,fga))
    cairo_stroke(cr)       
end

function draw_clock_hands(cr,xc,yc)
    local secs,mins,hours,secs_arc,mins_arc,hours_arc
    local xh,yh,xm,ym,xs,ys
   
    secs=os.date("%S")   
    mins=os.date("%M")
    hours=os.date("%I")
       
    secs_arc=(2*math.pi/60)*secs
    mins_arc=(2*math.pi/60)*mins+secs_arc/60
    hours_arc=(2*math.pi/12)*hours+mins_arc/12
       
    -- Draw hour hand
   
    xh=xc+0.7*clock_r*math.sin(hours_arc)
    yh=yc-0.7*clock_r*math.cos(hours_arc)
    cairo_move_to(cr,xc,yc)
    cairo_line_to(cr,xh,yh)
   
    cairo_set_line_cap(cr,CAIRO_LINE_CAP_ROUND)
    cairo_set_line_width(cr,5)
    cairo_set_source_rgba(cr,1.0,1.0,1.0,1.0)
    cairo_stroke(cr)
   
    -- Draw minute hand
   
    xm=xc+clock_r*math.sin(mins_arc)
    ym=yc-clock_r*math.cos(mins_arc)
    cairo_move_to(cr,xc,yc)
    cairo_line_to(cr,xm,ym)
   
    cairo_set_line_width(cr,3)
    cairo_stroke(cr)
   
    -- Draw seconds hand
   
    if show_seconds then
        xs=xc+clock_r*math.sin(secs_arc)
        ys=yc-clock_r*math.cos(secs_arc)
        cairo_move_to(cr,xc,yc)
        cairo_line_to(cr,xs,ys)
   
        cairo_set_line_width(cr,1)
        cairo_stroke(cr)
    end
end

function conky_clock_rings()
    local function setup_rings(cr,pt)
        local str=''
        local value=0
       
        str=string.format('${%s %s}',pt['name'],pt['arg'])
        str=conky_parse(str)
       
        value=tonumber(str)
        pct=value/pt['max']
       
        draw_ring(cr,pct,pt)
    end
   
    -- Check that Conky has been running for at least 5s

    if conky_window==nil then return end
    local cs=cairo_xlib_surface_create(conky_window.display,conky_window.drawable,conky_window.visual, conky_window.width,conky_window.height)
   
    local cr=cairo_create(cs)   
   
    local updates=conky_parse('${updates}')
    update_num=tonumber(updates)
   
    if update_num>5 then
        for i in pairs(settings_table) do
            setup_rings(cr,settings_table[i])
        end
    end
   
    draw_clock_hands(cr,clock_x,clock_y)
end

[alquirel]

Etiket için teşekkürler.