Xubuntu 11.10 Login ekranında kaldı ?!?

[MrKowalski]

Merhaba

Xubuntu 11.10'u kurdum bütün ayarlarımı yaptım güzel güzel çalışırken kaşıntı tuttu conky kurayım dedim. synaptic'ten "conky" ve "conky-all" kurdum ve sistemi yeniden başlattım. Ama login ekranında kullanıcı adımı seçip şifremi girdigimde ekran kararıp tekrar login ekranına geri dönüyor. Herhangi şifre yanlış uyarısıda almıyorum ki şifrenin dogru oldugundan da eminim.

guest hesabından giriş yapıp terminalden

Kod Seç Genişlet

sudo apt-get remove conky
sudo apt-get remove conky-all

diyerek kurdugum paketleri kaldırdım ve sistemi yeniden başlattım ama herhangi degişen bir şey olmadı. hala sisteme giriş yapamıyorum.  yardımcı olurmusunuz ??

[if]

@MrKowalski,

Kod Seç Genişlet

cat /var/log/dpkg.log çıktısından sorunun yaşanmadığı günleri çıkartın ve buraya aktarın.

Kod Seç Genişlet

lspci | grep VGA


Ayrıca sorunu tekrar ettikten sonra

Kod Seç Genişlet

cat /var/log/Xorg.0.log
cat /var/log/Xorg.0.log.old çıktılarını da alalım.

[MrKowalski]

"cat /var/log/dpkg.log" çıktısı (Not: Sistem saati yanlışmış. o yüzden tarihler eski. bütün olaylar bu gün oldu )

Kod Seç Genişlet

2011-10-24 22:06:45 startup archives unpack
2011-10-24 22:06:46 install libgif4 <none> 4.1.6-9
2011-10-24 22:06:46 status half-installed libgif4 4.1.6-9
2011-10-24 22:06:46 status unpacked libgif4 4.1.6-9
2011-10-24 22:06:46 status unpacked libgif4 4.1.6-9
2011-10-24 22:06:47 install libimlib2 <none> 1.4.4-1
2011-10-24 22:06:47 status half-installed libimlib2 1.4.4-1
2011-10-24 22:06:47 status unpacked libimlib2 1.4.4-1
2011-10-24 22:06:47 status unpacked libimlib2 1.4.4-1
2011-10-24 22:06:47 install conky-all <none> 1.8.1-2
2011-10-24 22:06:47 status half-installed conky-all 1.8.1-2
2011-10-24 22:06:47 status triggers-pending man-db 2.6.0.2-2
2011-10-24 22:06:47 status half-installed conky-all 1.8.1-2
2011-10-24 22:06:48 status unpacked conky-all 1.8.1-2
2011-10-24 22:06:48 status unpacked conky-all 1.8.1-2
2011-10-24 22:06:48 install conky <none> 1.8.1-2
2011-10-24 22:06:48 status half-installed conky 1.8.1-2
2011-10-24 22:06:48 status unpacked conky 1.8.1-2
2011-10-24 22:06:48 status unpacked conky 1.8.1-2
2011-10-24 22:06:48 trigproc man-db 2.6.0.2-2 2.6.0.2-2
2011-10-24 22:06:48 status half-configured man-db 2.6.0.2-2
2011-10-24 22:06:49 status installed man-db 2.6.0.2-2
2011-10-24 22:06:50 startup packages configure
2011-10-24 22:06:50 configure libgif4 4.1.6-9 <none>
2011-10-24 22:06:50 status unpacked libgif4 4.1.6-9
2011-10-24 22:06:50 status half-configured libgif4 4.1.6-9
2011-10-24 22:06:50 status installed libgif4 4.1.6-9
2011-10-24 22:06:50 status triggers-pending libc-bin 2.13-20ubuntu5
2011-10-24 22:06:50 configure libimlib2 1.4.4-1 <none>
2011-10-24 22:06:50 status unpacked libimlib2 1.4.4-1
2011-10-24 22:06:50 status half-configured libimlib2 1.4.4-1
2011-10-24 22:06:50 status installed libimlib2 1.4.4-1
2011-10-24 22:06:50 configure conky-all 1.8.1-2 <none>
2011-10-24 22:06:50 status unpacked conky-all 1.8.1-2
2011-10-24 22:06:50 status unpacked conky-all 1.8.1-2
2011-10-24 22:06:51 status unpacked conky-all 1.8.1-2
2011-10-24 22:06:51 status half-configured conky-all 1.8.1-2
2011-10-24 22:06:51 status installed conky-all 1.8.1-2
2011-10-24 22:06:51 configure conky 1.8.1-2 <none>
2011-10-24 22:06:51 status unpacked conky 1.8.1-2
2011-10-24 22:06:51 status half-configured conky 1.8.1-2
2011-10-24 22:06:51 status installed conky 1.8.1-2
2011-10-24 22:06:51 trigproc libc-bin 2.13-20ubuntu5 <none>
2011-10-24 22:06:51 status half-configured libc-bin 2.13-20ubuntu5
2011-10-24 22:06:51 status installed libc-bin 2.13-20ubuntu5
2011-10-24 22:16:02 startup packages remove
2011-10-24 22:16:02 status installed conky 1.8.1-2
2011-10-24 22:16:03 remove conky 1.8.1-2 <none>
2011-10-24 22:16:03 status half-configured conky 1.8.1-2
2011-10-24 22:16:03 status half-installed conky 1.8.1-2
2011-10-24 22:16:04 status config-files conky 1.8.1-2
2011-10-24 22:16:04 status config-files conky 1.8.1-2
2011-10-24 22:16:04 status config-files conky 1.8.1-2
2011-10-24 22:16:04 status not-installed conky <none>
2011-10-24 22:19:50 startup packages remove
2011-10-24 22:19:50 status installed conky-all 1.8.1-2
2011-10-24 22:19:51 remove conky-all 1.8.1-2 <none>
2011-10-24 22:19:51 status half-configured conky-all 1.8.1-2
2011-10-24 22:19:51 status half-installed conky-all 1.8.1-2
2011-10-24 22:19:51 status triggers-pending man-db 2.6.0.2-2
2011-10-24 22:19:51 status half-installed conky-all 1.8.1-2
2011-10-24 22:19:51 status config-files conky-all 1.8.1-2
2011-10-24 22:19:51 status config-files conky-all 1.8.1-2
2011-10-24 22:19:51 trigproc man-db 2.6.0.2-2 <none>
2011-10-24 22:19:51 status half-configured man-db 2.6.0.2-2
2011-10-24 22:19:52 status installed man-db 2.6.0.2-2
2011-10-25 01:22:35 startup packages remove
2011-10-25 01:22:35 status installed libimlib2 1.4.4-1
2011-10-25 01:22:36 remove libimlib2 1.4.4-1 <none>
2011-10-25 01:22:36 status half-configured libimlib2 1.4.4-1
2011-10-25 01:22:36 status half-installed libimlib2 1.4.4-1
2011-10-25 01:22:36 status triggers-pending libc-bin 2.13-20ubuntu5
2011-10-25 01:22:36 status config-files libimlib2 1.4.4-1
2011-10-25 01:22:36 status config-files libimlib2 1.4.4-1
2011-10-25 01:22:36 status installed libgif4 4.1.6-9
2011-10-25 01:22:37 remove libgif4 4.1.6-9 <none>
2011-10-25 01:22:37 status half-configured libgif4 4.1.6-9
2011-10-25 01:22:37 status half-installed libgif4 4.1.6-9
2011-10-25 01:22:37 status config-files libgif4 4.1.6-9
2011-10-25 01:22:37 status config-files libgif4 4.1.6-9
2011-10-25 01:22:37 trigproc libc-bin 2.13-20ubuntu5 <none>
2011-10-25 01:22:37 status half-configured libc-bin 2.13-20ubuntu5
2011-10-25 01:22:37 status installed libc-bin 2.13-20ubuntu5
2011-10-25 01:22:41 startup packages configure


"lspci | grep VGA" çıktısı

Kod Seç Genişlet

lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03)


"cat /var/log/Xorg.0.log" çıktısı

Kod Seç Genişlet

[    20.608]
X.Org X Server 1.10.4
Release Date: 2011-08-19
[    20.608] X Protocol Version 11, Revision 0
[    20.608] Build Operating System: Linux 2.6.24-29-server i686 Ubuntu
[    20.608] Current Operating System: Linux xubuntu-8000 3.0.0-12-generic #20-Ubuntu SMP Fri Oct 7 14:50:42 UTC 2011 i686
[    20.608] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-12-generic root=UUID=9273a190-e387-4928-a311-d855ce19ddd4 ro quiet splash vt.handoff=7
[    20.608] Build Date: 13 October 2011  05:33:17PM
[    20.608] xorg-server 2:1.10.4-1ubuntu4.1 (For technical support please see http://www.ubuntu.com/support)
[    20.608] Current version of pixman: 0.22.2
[    20.608] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[    20.608] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    20.608] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct 25 02:36:35 2011
[    20.608] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    20.609] (==) No Layout section.  Using the first Screen section.
[    20.609] (==) No screen section available. Using defaults.
[    20.609] (**) |-->Screen "Default Screen Section" (0)
[    20.609] (**) |   |-->Monitor "<default monitor>"
[    20.609] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[    20.609] (==) Automatically adding devices
[    20.609] (==) Automatically enabling devices
[    20.609] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    20.609] Entry deleted from font path.
[    20.609] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    20.609] Entry deleted from font path.
[    20.609] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    20.609] Entry deleted from font path.
[    20.609] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    20.609] Entry deleted from font path.
[    20.609] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    20.609] Entry deleted from font path.
[    20.609] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[    20.609] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    20.609] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[    20.609] (II) Loader magic: 0x823ada0
[    20.609] (II) Module ABI versions:
[    20.609] X.Org ANSI C Emulation: 0.4
[    20.609] X.Org Video Driver: 10.0
[    20.609] X.Org XInput driver : 12.3
[    20.609] X.Org Server Extension : 5.0
[    20.610] (--) PCI:*(0:0:2:0) 8086:2e12:103c:3647 rev 3, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00001230/8
[    20.610] (--) PCI: (0:0:2:1) 8086:2e13:103c:3647 rev 3, Mem @ 0xf0400000/1048576
[    20.610] (II) Open ACPI successful (/var/run/acpid.socket)
[    20.610] (II) LoadModule: "extmod"
[    20.610] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    20.610] (II) Module extmod: vendor="X.Org Foundation"
[    20.610] compiled for 1.10.4, module version = 1.0.0
[    20.610] Module class: X.Org Server Extension
[    20.610] ABI class: X.Org Server Extension, version 5.0
[    20.610] (II) Loading extension MIT-SCREEN-SAVER
[    20.610] (II) Loading extension XFree86-VidModeExtension
[    20.610] (II) Loading extension XFree86-DGA
[    20.610] (II) Loading extension DPMS
[    20.610] (II) Loading extension XVideo
[    20.610] (II) Loading extension XVideo-MotionCompensation
[    20.610] (II) Loading extension X-Resource
[    20.610] (II) LoadModule: "dbe"
[    20.611] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    20.611] (II) Module dbe: vendor="X.Org Foundation"
[    20.611] compiled for 1.10.4, module version = 1.0.0
[    20.611] Module class: X.Org Server Extension
[    20.611] ABI class: X.Org Server Extension, version 5.0
[    20.611] (II) Loading extension DOUBLE-BUFFER
[    20.611] (II) LoadModule: "glx"
[    20.611] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    20.611] (II) Module glx: vendor="X.Org Foundation"
[    20.611] compiled for 1.10.4, module version = 1.0.0
[    20.611] ABI class: X.Org Server Extension, version 5.0
[    20.611] (==) AIGLX enabled
[    20.611] (II) Loading extension GLX
[    20.611] (II) LoadModule: "record"
[    20.611] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    20.611] (II) Module record: vendor="X.Org Foundation"
[    20.611] compiled for 1.10.4, module version = 1.13.0
[    20.611] Module class: X.Org Server Extension
[    20.611] ABI class: X.Org Server Extension, version 5.0
[    20.611] (II) Loading extension RECORD
[    20.611] (II) LoadModule: "dri"
[    20.611] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    20.611] (II) Module dri: vendor="X.Org Foundation"
[    20.611] compiled for 1.10.4, module version = 1.0.0
[    20.611] ABI class: X.Org Server Extension, version 5.0
[    20.611] (II) Loading extension XFree86-DRI
[    20.611] (II) LoadModule: "dri2"
[    20.612] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    20.612] (II) Module dri2: vendor="X.Org Foundation"
[    20.612] compiled for 1.10.4, module version = 1.2.0
[    20.612] ABI class: X.Org Server Extension, version 5.0
[    20.612] (II) Loading extension DRI2
[    20.612] (==) Matched intel as autoconfigured driver 0
[    20.612] (==) Matched vesa as autoconfigured driver 1
[    20.612] (==) Matched fbdev as autoconfigured driver 2
[    20.612] (==) Assigned the driver to the xf86ConfigLayout
[    20.612] (II) LoadModule: "intel"
[    20.612] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    20.612] (II) Module intel: vendor="X.Org Foundation"
[    20.612] compiled for 1.10.2.902, module version = 2.15.901
[    20.612] Module class: X.Org Video Driver
[    20.612] ABI class: X.Org Video Driver, version 10.0
[    20.612] (II) LoadModule: "vesa"
[    20.612] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    20.613] (II) Module vesa: vendor="X.Org Foundation"
[    20.613] compiled for 1.10.2, module version = 2.3.0
[    20.613] Module class: X.Org Video Driver
[    20.613] ABI class: X.Org Video Driver, version 10.0
[    20.613] (II) LoadModule: "fbdev"
[    20.613] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    20.613] (II) Module fbdev: vendor="X.Org Foundation"
[    20.613] compiled for 1.10.0, module version = 0.4.2
[    20.613] ABI class: X.Org Video Driver, version 10.0
[    20.613] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[    20.613] (II) VESA: driver for VESA chipsets: vesa
[    20.613] (II) FBDEV: driver for framebuffer: fbdev
[    20.613] (++) using VT number 7

[    20.615] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    20.615] (WW) Falling back to old probe method for vesa
[    20.615] (WW) Falling back to old probe method for fbdev
[    20.615] (II) Loading sub module "fbdevhw"
[    20.615] (II) LoadModule: "fbdevhw"
[    20.615] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    20.615] (II) Module fbdevhw: vendor="X.Org Foundation"
[    20.615] compiled for 1.10.4, module version = 0.0.2
[    20.615] ABI class: X.Org Video Driver, version 10.0
[    20.615] drmOpenDevice: node name is /dev/dri/card0
[    20.615] drmOpenDevice: open result is 12, (OK)
[    20.615] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    20.615] drmOpenDevice: node name is /dev/dri/card0
[    20.615] drmOpenDevice: open result is 12, (OK)
[    20.615] drmOpenByBusid: drmOpenMinor returns 12
[    20.615] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    20.615] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[    20.615] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    20.615] (==) intel(0): RGB weight 888
[    20.615] (==) intel(0): Default visual is TrueColor
[    20.615] (II) intel(0): Integrated Graphics Chipset: Intel(R) Q45/Q43
[    20.615] (--) intel(0): Chipset: "Q45/Q43"
[    20.615] (**) intel(0): Relaxed fencing enabled
[    20.615] (**) intel(0): Wait on SwapBuffers? enabled
[    20.615] (**) intel(0): Triple buffering? enabled
[    20.615] (**) intel(0): Framebuffer tiled
[    20.615] (**) intel(0): Pixmaps tiled
[    20.615] (**) intel(0): 3D buffers tiled
[    20.615] (**) intel(0): SwapBuffers wait enabled
[    20.615] (==) intel(0): video overlay key set to 0x101fe
[    20.695] (II) intel(0): Output VGA1 has no monitor section
[    20.714] (II) intel(0): Output HDMI1 has no monitor section
[    20.714] (II) intel(0): Output DP1 has no monitor section
[    20.795] (II) intel(0): EDID for output VGA1
[    20.795] (II) intel(0): Manufacturer: HWP  Model: 2842  Serial#: 16843009
[    20.795] (II) intel(0): Year: 2010  Week: 24
[    20.795] (II) intel(0): EDID Version: 1.3
[    20.795] (II) intel(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
[    20.795] (II) intel(0): Sync:  Separate  Composite  SyncOnGreen
[    20.795] (II) intel(0): Max Image Size [cm]: horiz.: 41  vert.: 26
[    20.795] (II) intel(0): Gamma: 2.20
[    20.795] (II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[    20.795] (II) intel(0): Default color space is primary color space
[    20.795] (II) intel(0): First detailed timing is preferred mode
[    20.795] (II) intel(0): redX: 0.641 redY: 0.335   greenX: 0.298 greenY: 0.608
[    20.795] (II) intel(0): blueX: 0.147 blueY: 0.070   whiteX: 0.313 whiteY: 0.329
[    20.795] (II) intel(0): Supported established timings:
[    20.795] (II) intel(0): 720x400@70Hz
[    20.795] (II) intel(0): 640x480@60Hz
[    20.795] (II) intel(0): 640x480@75Hz
[    20.795] (II) intel(0): 800x600@60Hz
[    20.795] (II) intel(0): 800x600@75Hz
[    20.795] (II) intel(0): 832x624@75Hz
[    20.795] (II) intel(0): 1024x768@60Hz
[    20.795] (II) intel(0): 1024x768@75Hz
[    20.795] (II) intel(0): 1280x1024@75Hz
[    20.795] (II) intel(0): 1152x864@75Hz
[    20.795] (II) intel(0): Manufacturer's mask: 0
[    20.795] (II) intel(0): Supported standard timings:
[    20.795] (II) intel(0): #0: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    20.795] (II) intel(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    20.795] (II) intel(0): #2: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    20.795] (II) intel(0): Supported detailed timing:
[    20.795] (II) intel(0): clock: 106.5 MHz   Image Size:  410 x 256 mm
[    20.795] (II) intel(0): h_active: 1440  h_sync: 1520  h_sync_end 1672 h_blank_end 1904 h_border: 0
[    20.795] (II) intel(0): v_active: 900  v_sync: 903  v_sync_end 909 v_blanking: 934 v_border: 0
[    20.795] (II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 83 kHz, PixClock max 145 MHz
[    20.795] (II) intel(0): Monitor name: HP LE1901w
[    20.795] (II) intel(0): Serial No: 3CQ0240K1G
[    20.795] (II) intel(0): EDID (in hex):
[    20.795] (II) intel(0): 00ffffffffffff0022f0422801010101
[    20.795] (II) intel(0): 181401036e291a78ee37c5a4554c9b25
[    20.795] (II) intel(0): 125054a56b8095008180814001010101
[    20.795] (II) intel(0): 0101010101019a29a0d0518422305098
[    20.795] (II) intel(0): 36009a001100001c000000fd00324c18
[    20.796] (II) intel(0): 530e000a202020202020000000fc0048
[    20.796] (II) intel(0): 50204c4531393031770a2020000000ff
[    20.796] (II) intel(0): 00334351303234304b31470a20200030
[    20.796] (II) intel(0): EDID vendor "HWP", prod id 10306
[    20.796] (II) intel(0): Using EDID range info for horizontal sync
[    20.796] (II) intel(0): Using EDID range info for vertical refresh
[    20.796] (II) intel(0): Printing DDC gathered Modelines:
[    20.796] (II) intel(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
[    20.796] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    20.796] (II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    20.796] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    20.796] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    20.796] (II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    20.796] (II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    20.796] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    20.796] (II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    20.796] (II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    20.796] (II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    20.796] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    20.796] (II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    20.796] (II) intel(0): Printing probed modes for output VGA1
[    20.796] (II) intel(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
[    20.796] (II) intel(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    20.796] (II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    20.796] (II) intel(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    20.796] (II) intel(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    20.796] (II) intel(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
[    20.796] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    20.796] (II) intel(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    20.796] (II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    20.796] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    20.796] (II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    20.796] (II) intel(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    20.796] (II) intel(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    20.815] (II) intel(0): EDID for output HDMI1
[    20.815] (II) intel(0): EDID for output DP1
[    20.815] (II) intel(0): Output VGA1 connected
[    20.815] (II) intel(0): Output HDMI1 disconnected
[    20.815] (II) intel(0): Output DP1 disconnected
[    20.815] (II) intel(0): Using exact sizes for initial modes
[    20.815] (II) intel(0): Output VGA1 using initial mode 1440x900
[    20.815] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    20.815] (II) intel(0): Kernel page flipping support detected, enabling
[    20.815] (**) intel(0): Display dimensions: (410, 260) mm
[    20.815] (**) intel(0): DPI set to (89, 87)
[    20.815] (II) Loading sub module "fb"
[    20.815] (II) LoadModule: "fb"
[    20.816] (II) Loading /usr/lib/xorg/modules/libfb.so
[    20.816] (II) Module fb: vendor="X.Org Foundation"
[    20.816] compiled for 1.10.4, module version = 1.0.0
[    20.816] ABI class: X.Org ANSI C Emulation, version 0.4
[    20.816] (II) Loading sub module "dri2"
[    20.816] (II) LoadModule: "dri2"
[    20.816] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    20.816] (II) Module dri2: vendor="X.Org Foundation"
[    20.816] compiled for 1.10.4, module version = 1.2.0
[    20.816] ABI class: X.Org Server Extension, version 5.0
[    20.816] (II) UnloadModule: "vesa"
[    20.816] (II) Unloading vesa
[    20.816] (II) UnloadModule: "fbdev"
[    20.816] (II) Unloading fbdev
[    20.816] (II) UnloadModule: "fbdevhw"
[    20.816] (II) Unloading fbdevhw
[    20.816] (==) Depth 24 pixmap format is 32 bpp
[    20.816] (II) intel(0): [DRI2] Setup complete
[    20.816] (II) intel(0): [DRI2]   DRI driver: i965
[    20.816] (II) intel(0): Allocated new frame buffer 1472x900 stride 6144, tiled
[    20.825] (II) UXA(0): Driver registered support for the following operations:
[    20.825] (II)         solid
[    20.825] (II)         copy
[    20.825] (II)         composite (RENDER acceleration)
[    20.825] (II)         put_image
[    20.825] (II)         get_image
[    20.825] (==) intel(0): Backing store disabled
[    20.825] (==) intel(0): Silken mouse enabled
[    20.825] (II) intel(0): Initializing HW Cursor
[    20.840] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    20.840] (==) intel(0): DPMS enabled
[    20.840] (==) intel(0): Intel XvMC decoder enabled
[    20.840] (II) intel(0): Set up textured video
[    20.840] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[    20.840] (II) intel(0): direct rendering: DRI2 Enabled
[    20.840] (==) intel(0): hotplug detection: "enabled"
[    20.840] (--) RandR disabled
[    20.840] (II) Initializing built-in extension Generic Event Extension
[    20.840] (II) Initializing built-in extension SHAPE
[    20.840] (II) Initializing built-in extension MIT-SHM
[    20.840] (II) Initializing built-in extension XInputExtension
[    20.840] (II) Initializing built-in extension XTEST
[    20.840] (II) Initializing built-in extension BIG-REQUESTS
[    20.840] (II) Initializing built-in extension SYNC
[    20.840] (II) Initializing built-in extension XKEYBOARD
[    20.840] (II) Initializing built-in extension XC-MISC
[    20.840] (II) Initializing built-in extension SECURITY
[    20.840] (II) Initializing built-in extension XINERAMA
[    20.840] (II) Initializing built-in extension XFIXES
[    20.840] (II) Initializing built-in extension RENDER
[    20.840] (II) Initializing built-in extension RANDR
[    20.840] (II) Initializing built-in extension COMPOSITE
[    20.840] (II) Initializing built-in extension DAMAGE
[    20.840] (II) Initializing built-in extension GESTURE
[    20.848] (II) AIGLX: Trying DRI driver /usr/lib/i386-linux-gnu/dri/i965_dri.so
[    20.851] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    20.851] (II) AIGLX: enabled GLX_INTEL_swap_event
[    20.851] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    20.851] (II) AIGLX: enabled GLX_SGI_make_current_read
[    20.851] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    20.851] (II) AIGLX: Loaded and initialized i965
[    20.851] (II) GLX: Initialized DRI2 GL provider for screen 0
[    20.852] (II) intel(0): Setting screen physical size to 380 x 238
[    20.858] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    20.867] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    20.867] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    20.867] (II) LoadModule: "evdev"
[    20.867] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    20.867] (II) Module evdev: vendor="X.Org Foundation"
[    20.867] compiled for 1.10.2, module version = 2.6.0
[    20.867] Module class: X.Org XInput Driver
[    20.867] ABI class: X.Org XInput driver, version 12.3
[    20.867] (II) Using input driver 'evdev' for 'Power Button'
[    20.867] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    20.867] (**) Power Button: always reports core events
[    20.867] (**) Power Button: Device: "/dev/input/event1"
[    20.868] (--) Power Button: Found keys
[    20.868] (II) Power Button: Configuring as keyboard
[    20.868] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    20.868] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    20.868] (**) Option "xkb_rules" "evdev"
[    20.868] (**) Option "xkb_model" "pc105"
[    20.868] (**) Option "xkb_layout" "tr"
[    20.869] (II) XKB: reuse xkmfile /var/lib/xkb/server-609880D4F1521A95A29BCD7AB1227A69EC9A1B72.xkm
[    20.870] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[    20.870] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    20.870] (II) Using input driver 'evdev' for 'Video Bus'
[    20.870] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    20.870] (**) Video Bus: always reports core events
[    20.870] (**) Video Bus: Device: "/dev/input/event4"
[    20.870] (--) Video Bus: Found keys
[    20.870] (II) Video Bus: Configuring as keyboard
[    20.870] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
[    20.870] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[    20.870] (**) Option "xkb_rules" "evdev"
[    20.870] (**) Option "xkb_model" "pc105"
[    20.870] (**) Option "xkb_layout" "tr"
[    20.873] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    20.873] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    20.873] (II) Using input driver 'evdev' for 'Power Button'
[    20.873] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    20.873] (**) Power Button: always reports core events
[    20.873] (**) Power Button: Device: "/dev/input/event0"
[    20.873] (--) Power Button: Found keys
[    20.873] (II) Power Button: Configuring as keyboard
[    20.873] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[    20.873] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    20.873] (**) Option "xkb_rules" "evdev"
[    20.873] (**) Option "xkb_model" "pc105"
[    20.873] (**) Option "xkb_layout" "tr"
[    20.876] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event6)
[    20.876] (II) No input driver/identifier specified (ignoring)
[    20.877] (II) config/udev: Adding input device USB Mouse (/dev/input/event3)
[    20.877] (**) USB Mouse: Applying InputClass "evdev pointer catchall"
[    20.877] (II) Using input driver 'evdev' for 'USB Mouse'
[    20.877] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    20.877] (**) USB Mouse: always reports core events
[    20.877] (**) USB Mouse: Device: "/dev/input/event3"
[    20.877] (--) USB Mouse: Found 3 mouse buttons
[    20.877] (--) USB Mouse: Found scroll wheel(s)
[    20.877] (--) USB Mouse: Found relative axes
[    20.877] (--) USB Mouse: Found x and y relative axes
[    20.877] (II) USB Mouse: Configuring as mouse
[    20.877] (II) USB Mouse: Adding scrollwheel support
[    20.877] (**) USB Mouse: YAxisMapping: buttons 4 and 5
[    20.877] (**) USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    20.877] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input3/event3"
[    20.877] (II) XINPUT: Adding extended input device "USB Mouse" (type: MOUSE)
[    20.878] (II) USB Mouse: initialized for relative axes.
[    20.878] (**) USB Mouse: (accel) keeping acceleration scheme 1
[    20.878] (**) USB Mouse: (accel) acceleration profile 0
[    20.878] (**) USB Mouse: (accel) acceleration factor: 2.000
[    20.878] (**) USB Mouse: (accel) acceleration threshold: 4
[    20.878] (II) config/udev: Adding input device USB Mouse (/dev/input/mouse0)
[    20.878] (II) No input driver/identifier specified (ignoring)
[    20.881] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[    20.882] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    20.882] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    20.882] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    20.882] (**) AT Translated Set 2 keyboard: always reports core events
[    20.882] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[    20.882] (--) AT Translated Set 2 keyboard: Found keys
[    20.882] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[    20.882] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[    20.882] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[    20.882] (**) Option "xkb_rules" "evdev"
[    20.882] (**) Option "xkb_model" "pc105"
[    20.882] (**) Option "xkb_layout" "tr"
[    20.886] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event5)
[    20.886] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    20.886] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[    20.886] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    20.886] (**) HP WMI hotkeys: always reports core events
[    20.886] (**) HP WMI hotkeys: Device: "/dev/input/event5"
[    20.886] (--) HP WMI hotkeys: Found keys
[    20.886] (II) HP WMI hotkeys: Configuring as keyboard
[    20.886] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event5"
[    20.886] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD)
[    20.886] (**) Option "xkb_rules" "evdev"
[    20.886] (**) Option "xkb_model" "pc105"
[    20.887] (**) Option "xkb_layout" "tr"
[    26.643] (II) intel(0): EDID vendor "HWP", prod id 10306
[    26.643] (II) intel(0): Using hsync ranges from config file
[    26.643] (II) intel(0): Using vrefresh ranges from config file
[    26.643] (II) intel(0): Printing DDC gathered Modelines:
[    26.643] (II) intel(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
[    26.643] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    26.643] (II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    26.643] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    26.643] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    26.643] (II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    26.643] (II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    26.643] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    26.643] (II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    26.643] (II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    26.643] (II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    26.643] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    26.643] (II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    26.743] (II) intel(0): EDID vendor "HWP", prod id 10306
[    26.743] (II) intel(0): Using hsync ranges from config file
[    26.743] (II) intel(0): Using vrefresh ranges from config file
[    26.743] (II) intel(0): Printing DDC gathered Modelines:
[    26.743] (II) intel(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
[    26.743] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    26.743] (II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    26.743] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    26.743] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    26.743] (II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    26.743] (II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    26.743] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    26.743] (II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    26.743] (II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    26.743] (II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    26.743] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    26.743] (II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    27.296] (II) intel(0): EDID vendor "HWP", prod id 10306
[    27.296] (II) intel(0): Using hsync ranges from config file
[    27.296] (II) intel(0): Using vrefresh ranges from config file
[    27.296] (II) intel(0): Printing DDC gathered Modelines:
[    27.296] (II) intel(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
[    27.296] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    27.296] (II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    27.296] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    27.296] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    27.296] (II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    27.296] (II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    27.296] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    27.296] (II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    27.296] (II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    27.296] (II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    27.296] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    27.296] (II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)


"cat /var/log/Xorg.0.log.old" çıktısı

Kod Seç Genişlet

[    10.198]
X.Org X Server 1.10.4
Release Date: 2011-08-19
[    10.198] X Protocol Version 11, Revision 0
[    10.198] Build Operating System: Linux 2.6.24-29-server i686 Ubuntu
[    10.198] Current Operating System: Linux xubuntu-8000 3.0.0-12-generic #20-Ubuntu SMP Fri Oct 7 14:50:42 UTC 2011 i686
[    10.198] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-12-generic root=UUID=9273a190-e387-4928-a311-d855ce19ddd4 ro quiet splash vt.handoff=7
[    10.198] Build Date: 13 October 2011  05:33:17PM
[    10.198] xorg-server 2:1.10.4-1ubuntu4.1 (For technical support please see http://www.ubuntu.com/support)
[    10.198] Current version of pixman: 0.22.2
[    10.198] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[    10.198] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    10.198] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct 25 02:36:24 2011
[    10.199] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    10.199] (==) No Layout section.  Using the first Screen section.
[    10.199] (==) No screen section available. Using defaults.
[    10.199] (**) |-->Screen "Default Screen Section" (0)
[    10.199] (**) |   |-->Monitor "<default monitor>"
[    10.199] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[    10.199] (==) Automatically adding devices
[    10.199] (==) Automatically enabling devices
[    10.199] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    10.199] Entry deleted from font path.
[    10.199] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    10.199] Entry deleted from font path.
[    10.199] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    10.199] Entry deleted from font path.
[    10.199] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    10.199] Entry deleted from font path.
[    10.199] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    10.199] Entry deleted from font path.
[    10.199] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[    10.199] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    10.199] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[    10.199] (II) Loader magic: 0x823ada0
[    10.199] (II) Module ABI versions:
[    10.199] X.Org ANSI C Emulation: 0.4
[    10.199] X.Org Video Driver: 10.0
[    10.199] X.Org XInput driver : 12.3
[    10.199] X.Org Server Extension : 5.0
[    10.200] (--) PCI:*(0:0:2:0) 8086:2e12:103c:3647 rev 3, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00001230/8
[    10.200] (--) PCI: (0:0:2:1) 8086:2e13:103c:3647 rev 3, Mem @ 0xf0400000/1048576
[    10.200] (II) Open ACPI successful (/var/run/acpid.socket)
[    10.200] (II) LoadModule: "extmod"
[    10.218] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    10.219] (II) Module extmod: vendor="X.Org Foundation"
[    10.219] compiled for 1.10.4, module version = 1.0.0
[    10.219] Module class: X.Org Server Extension
[    10.219] ABI class: X.Org Server Extension, version 5.0
[    10.219] (II) Loading extension MIT-SCREEN-SAVER
[    10.219] (II) Loading extension XFree86-VidModeExtension
[    10.219] (II) Loading extension XFree86-DGA
[    10.219] (II) Loading extension DPMS
[    10.219] (II) Loading extension XVideo
[    10.219] (II) Loading extension XVideo-MotionCompensation
[    10.219] (II) Loading extension X-Resource
[    10.219] (II) LoadModule: "dbe"
[    10.219] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    10.219] (II) Module dbe: vendor="X.Org Foundation"
[    10.219] compiled for 1.10.4, module version = 1.0.0
[    10.219] Module class: X.Org Server Extension
[    10.219] ABI class: X.Org Server Extension, version 5.0
[    10.219] (II) Loading extension DOUBLE-BUFFER
[    10.219] (II) LoadModule: "glx"
[    10.219] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    10.219] (II) Module glx: vendor="X.Org Foundation"
[    10.219] compiled for 1.10.4, module version = 1.0.0
[    10.219] ABI class: X.Org Server Extension, version 5.0
[    10.219] (==) AIGLX enabled
[    10.219] (II) Loading extension GLX
[    10.219] (II) LoadModule: "record"
[    10.219] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    10.219] (II) Module record: vendor="X.Org Foundation"
[    10.219] compiled for 1.10.4, module version = 1.13.0
[    10.219] Module class: X.Org Server Extension
[    10.219] ABI class: X.Org Server Extension, version 5.0
[    10.219] (II) Loading extension RECORD
[    10.219] (II) LoadModule: "dri"
[    10.220] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    10.220] (II) Module dri: vendor="X.Org Foundation"
[    10.220] compiled for 1.10.4, module version = 1.0.0
[    10.220] ABI class: X.Org Server Extension, version 5.0
[    10.220] (II) Loading extension XFree86-DRI
[    10.220] (II) LoadModule: "dri2"
[    10.220] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    10.220] (II) Module dri2: vendor="X.Org Foundation"
[    10.220] compiled for 1.10.4, module version = 1.2.0
[    10.220] ABI class: X.Org Server Extension, version 5.0
[    10.220] (II) Loading extension DRI2
[    10.220] (==) Matched intel as autoconfigured driver 0
[    10.220] (==) Matched vesa as autoconfigured driver 1
[    10.220] (==) Matched fbdev as autoconfigured driver 2
[    10.220] (==) Assigned the driver to the xf86ConfigLayout
[    10.220] (II) LoadModule: "intel"
[    10.239] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    10.239] (II) Module intel: vendor="X.Org Foundation"
[    10.239] compiled for 1.10.2.902, module version = 2.15.901
[    10.239] Module class: X.Org Video Driver
[    10.239] ABI class: X.Org Video Driver, version 10.0
[    10.239] (II) LoadModule: "vesa"
[    10.240] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    10.240] (II) Module vesa: vendor="X.Org Foundation"
[    10.240] compiled for 1.10.2, module version = 2.3.0
[    10.240] Module class: X.Org Video Driver
[    10.240] ABI class: X.Org Video Driver, version 10.0
[    10.240] (II) LoadModule: "fbdev"
[    10.240] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    10.240] (II) Module fbdev: vendor="X.Org Foundation"
[    10.240] compiled for 1.10.0, module version = 0.4.2
[    10.240] ABI class: X.Org Video Driver, version 10.0
[    10.240] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[    10.240] (II) VESA: driver for VESA chipsets: vesa
[    10.240] (II) FBDEV: driver for framebuffer: fbdev
[    10.240] (++) using VT number 7

[    10.242] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    10.242] (WW) Falling back to old probe method for vesa
[    10.242] (WW) Falling back to old probe method for fbdev
[    10.242] (II) Loading sub module "fbdevhw"
[    10.242] (II) LoadModule: "fbdevhw"
[    10.242] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    10.242] (II) Module fbdevhw: vendor="X.Org Foundation"
[    10.242] compiled for 1.10.4, module version = 0.0.2
[    10.242] ABI class: X.Org Video Driver, version 10.0
[    10.242] drmOpenDevice: node name is /dev/dri/card0
[    10.242] drmOpenDevice: open result is 12, (OK)
[    10.242] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    10.242] drmOpenDevice: node name is /dev/dri/card0
[    10.242] drmOpenDevice: open result is 12, (OK)
[    10.242] drmOpenByBusid: drmOpenMinor returns 12
[    10.242] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    10.242] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[    10.242] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    10.242] (==) intel(0): RGB weight 888
[    10.242] (==) intel(0): Default visual is TrueColor
[    10.242] (II) intel(0): Integrated Graphics Chipset: Intel(R) Q45/Q43
[    10.242] (--) intel(0): Chipset: "Q45/Q43"
[    10.242] (**) intel(0): Relaxed fencing enabled
[    10.242] (**) intel(0): Wait on SwapBuffers? enabled
[    10.242] (**) intel(0): Triple buffering? enabled
[    10.242] (**) intel(0): Framebuffer tiled
[    10.242] (**) intel(0): Pixmaps tiled
[    10.242] (**) intel(0): 3D buffers tiled
[    10.242] (**) intel(0): SwapBuffers wait enabled
[    10.243] (==) intel(0): video overlay key set to 0x101fe
[    10.327] (II) intel(0): Output VGA1 has no monitor section
[    10.346] (II) intel(0): Output HDMI1 has no monitor section
[    10.347] (II) intel(0): Output DP1 has no monitor section
[    10.428] (II) intel(0): EDID for output VGA1
[    10.428] (II) intel(0): Manufacturer: HWP  Model: 2842  Serial#: 16843009
[    10.428] (II) intel(0): Year: 2010  Week: 24
[    10.428] (II) intel(0): EDID Version: 1.3
[    10.428] (II) intel(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
[    10.428] (II) intel(0): Sync:  Separate  Composite  SyncOnGreen
[    10.428] (II) intel(0): Max Image Size [cm]: horiz.: 41  vert.: 26
[    10.428] (II) intel(0): Gamma: 2.20
[    10.428] (II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[    10.428] (II) intel(0): Default color space is primary color space
[    10.428] (II) intel(0): First detailed timing is preferred mode
[    10.428] (II) intel(0): redX: 0.641 redY: 0.335   greenX: 0.298 greenY: 0.608
[    10.428] (II) intel(0): blueX: 0.147 blueY: 0.070   whiteX: 0.313 whiteY: 0.329
[    10.428] (II) intel(0): Supported established timings:
[    10.428] (II) intel(0): 720x400@70Hz
[    10.428] (II) intel(0): 640x480@60Hz
[    10.428] (II) intel(0): 640x480@75Hz
[    10.428] (II) intel(0): 800x600@60Hz
[    10.428] (II) intel(0): 800x600@75Hz
[    10.428] (II) intel(0): 832x624@75Hz
[    10.428] (II) intel(0): 1024x768@60Hz
[    10.428] (II) intel(0): 1024x768@75Hz
[    10.428] (II) intel(0): 1280x1024@75Hz
[    10.428] (II) intel(0): 1152x864@75Hz
[    10.428] (II) intel(0): Manufacturer's mask: 0
[    10.428] (II) intel(0): Supported standard timings:
[    10.428] (II) intel(0): #0: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    10.428] (II) intel(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    10.428] (II) intel(0): #2: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    10.428] (II) intel(0): Supported detailed timing:
[    10.428] (II) intel(0): clock: 106.5 MHz   Image Size:  410 x 256 mm
[    10.428] (II) intel(0): h_active: 1440  h_sync: 1520  h_sync_end 1672 h_blank_end 1904 h_border: 0
[    10.428] (II) intel(0): v_active: 900  v_sync: 903  v_sync_end 909 v_blanking: 934 v_border: 0
[    10.428] (II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 83 kHz, PixClock max 145 MHz
[    10.428] (II) intel(0): Monitor name: HP LE1901w
[    10.428] (II) intel(0): Serial No: 3CQ0240K1G
[    10.428] (II) intel(0): EDID (in hex):
[    10.428] (II) intel(0): 00ffffffffffff0022f0422801010101
[    10.428] (II) intel(0): 181401036e291a78ee37c5a4554c9b25
[    10.428] (II) intel(0): 125054a56b8095008180814001010101
[    10.428] (II) intel(0): 0101010101019a29a0d0518422305098
[    10.428] (II) intel(0): 36009a001100001c000000fd00324c18
[    10.428] (II) intel(0): 530e000a202020202020000000fc0048
[    10.428] (II) intel(0): 50204c4531393031770a2020000000ff
[    10.428] (II) intel(0): 00334351303234304b31470a20200030
[    10.428] (II) intel(0): EDID vendor "HWP", prod id 10306
[    10.428] (II) intel(0): Using EDID range info for horizontal sync
[    10.428] (II) intel(0): Using EDID range info for vertical refresh
[    10.428] (II) intel(0): Printing DDC gathered Modelines:
[    10.428] (II) intel(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
[    10.428] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    10.428] (II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    10.428] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    10.428] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    10.428] (II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    10.428] (II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    10.428] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    10.428] (II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    10.428] (II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    10.428] (II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    10.428] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    10.428] (II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    10.429] (II) intel(0): Printing probed modes for output VGA1
[    10.429] (II) intel(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
[    10.429] (II) intel(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    10.429] (II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    10.429] (II) intel(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    10.429] (II) intel(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    10.429] (II) intel(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
[    10.429] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    10.429] (II) intel(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    10.429] (II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    10.429] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    10.429] (II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    10.429] (II) intel(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    10.429] (II) intel(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    10.449] (II) intel(0): EDID for output HDMI1
[    10.449] (II) intel(0): EDID for output DP1
[    10.449] (II) intel(0): Output VGA1 connected
[    10.449] (II) intel(0): Output HDMI1 disconnected
[    10.449] (II) intel(0): Output DP1 disconnected
[    10.449] (II) intel(0): Using exact sizes for initial modes
[    10.449] (II) intel(0): Output VGA1 using initial mode 1440x900
[    10.449] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    10.449] (II) intel(0): Kernel page flipping support detected, enabling
[    10.449] (**) intel(0): Display dimensions: (410, 260) mm
[    10.449] (**) intel(0): DPI set to (89, 87)
[    10.449] (II) Loading sub module "fb"
[    10.449] (II) LoadModule: "fb"
[    10.450] (II) Loading /usr/lib/xorg/modules/libfb.so
[    10.450] (II) Module fb: vendor="X.Org Foundation"
[    10.450] compiled for 1.10.4, module version = 1.0.0
[    10.450] ABI class: X.Org ANSI C Emulation, version 0.4
[    10.450] (II) Loading sub module "dri2"
[    10.450] (II) LoadModule: "dri2"
[    10.450] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    10.450] (II) Module dri2: vendor="X.Org Foundation"
[    10.450] compiled for 1.10.4, module version = 1.2.0
[    10.450] ABI class: X.Org Server Extension, version 5.0
[    10.450] (II) UnloadModule: "vesa"
[    10.450] (II) Unloading vesa
[    10.450] (II) UnloadModule: "fbdev"
[    10.450] (II) Unloading fbdev
[    10.450] (II) UnloadModule: "fbdevhw"
[    10.450] (II) Unloading fbdevhw
[    10.450] (==) Depth 24 pixmap format is 32 bpp
[    10.450] (II) intel(0): [DRI2] Setup complete
[    10.450] (II) intel(0): [DRI2]   DRI driver: i965
[    10.450] (II) intel(0): Allocated new frame buffer 1472x900 stride 6144, tiled
[    10.460] (II) UXA(0): Driver registered support for the following operations:
[    10.460] (II)         solid
[    10.460] (II)         copy
[    10.460] (II)         composite (RENDER acceleration)
[    10.460] (II)         put_image
[    10.460] (II)         get_image
[    10.460] (==) intel(0): Backing store disabled
[    10.460] (==) intel(0): Silken mouse enabled
[    10.460] (II) intel(0): Initializing HW Cursor
[    10.476] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    10.476] (==) intel(0): DPMS enabled
[    10.476] (==) intel(0): Intel XvMC decoder enabled
[    10.476] (II) intel(0): Set up textured video
[    10.476] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[    10.476] (II) intel(0): direct rendering: DRI2 Enabled
[    10.476] (==) intel(0): hotplug detection: "enabled"
[    10.476] (--) RandR disabled
[    10.476] (II) Initializing built-in extension Generic Event Extension
[    10.476] (II) Initializing built-in extension SHAPE
[    10.476] (II) Initializing built-in extension MIT-SHM
[    10.476] (II) Initializing built-in extension XInputExtension
[    10.476] (II) Initializing built-in extension XTEST
[    10.476] (II) Initializing built-in extension BIG-REQUESTS
[    10.476] (II) Initializing built-in extension SYNC
[    10.476] (II) Initializing built-in extension XKEYBOARD
[    10.476] (II) Initializing built-in extension XC-MISC
[    10.476] (II) Initializing built-in extension SECURITY
[    10.476] (II) Initializing built-in extension XINERAMA
[    10.476] (II) Initializing built-in extension XFIXES
[    10.476] (II) Initializing built-in extension RENDER
[    10.476] (II) Initializing built-in extension RANDR
[    10.476] (II) Initializing built-in extension COMPOSITE
[    10.476] (II) Initializing built-in extension DAMAGE
[    10.476] (II) Initializing built-in extension GESTURE
[    10.484] (II) AIGLX: Trying DRI driver /usr/lib/i386-linux-gnu/dri/i965_dri.so
[    10.487] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    10.487] (II) AIGLX: enabled GLX_INTEL_swap_event
[    10.487] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    10.487] (II) AIGLX: enabled GLX_SGI_make_current_read
[    10.487] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    10.487] (II) AIGLX: Loaded and initialized i965
[    10.487] (II) GLX: Initialized DRI2 GL provider for screen 0
[    10.487] (II) intel(0): Setting screen physical size to 380 x 238
[    10.494] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    10.503] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    10.503] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    10.503] (II) LoadModule: "evdev"
[    10.503] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    10.504] (II) Module evdev: vendor="X.Org Foundation"
[    10.504] compiled for 1.10.2, module version = 2.6.0
[    10.504] Module class: X.Org XInput Driver
[    10.504] ABI class: X.Org XInput driver, version 12.3
[    10.504] (II) Using input driver 'evdev' for 'Power Button'
[    10.504] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    10.504] (**) Power Button: always reports core events
[    10.504] (**) Power Button: Device: "/dev/input/event1"
[    10.504] (--) Power Button: Found keys
[    10.504] (II) Power Button: Configuring as keyboard
[    10.504] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    10.504] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    10.504] (**) Option "xkb_rules" "evdev"
[    10.504] (**) Option "xkb_model" "pc105"
[    10.504] (**) Option "xkb_layout" "tr"
[    10.506] (II) XKB: reuse xkmfile /var/lib/xkb/server-609880D4F1521A95A29BCD7AB1227A69EC9A1B72.xkm
[    10.507] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[    10.507] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    10.507] (II) Using input driver 'evdev' for 'Video Bus'
[    10.507] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    10.507] (**) Video Bus: always reports core events
[    10.507] (**) Video Bus: Device: "/dev/input/event4"
[    10.507] (--) Video Bus: Found keys
[    10.507] (II) Video Bus: Configuring as keyboard
[    10.507] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
[    10.507] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[    10.507] (**) Option "xkb_rules" "evdev"
[    10.507] (**) Option "xkb_model" "pc105"
[    10.507] (**) Option "xkb_layout" "tr"
[    10.509] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    10.509] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    10.509] (II) Using input driver 'evdev' for 'Power Button'
[    10.509] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    10.509] (**) Power Button: always reports core events
[    10.509] (**) Power Button: Device: "/dev/input/event0"
[    10.509] (--) Power Button: Found keys
[    10.510] (II) Power Button: Configuring as keyboard
[    10.510] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[    10.510] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    10.510] (**) Option "xkb_rules" "evdev"
[    10.510] (**) Option "xkb_model" "pc105"
[    10.510] (**) Option "xkb_layout" "tr"
[    10.513] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event6)
[    10.513] (II) No input driver/identifier specified (ignoring)
[    10.514] (II) config/udev: Adding input device USB Mouse (/dev/input/event3)
[    10.514] (**) USB Mouse: Applying InputClass "evdev pointer catchall"
[    10.514] (II) Using input driver 'evdev' for 'USB Mouse'
[    10.514] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    10.514] (**) USB Mouse: always reports core events
[    10.514] (**) USB Mouse: Device: "/dev/input/event3"
[    10.514] (--) USB Mouse: Found 3 mouse buttons
[    10.514] (--) USB Mouse: Found scroll wheel(s)
[    10.514] (--) USB Mouse: Found relative axes
[    10.514] (--) USB Mouse: Found x and y relative axes
[    10.514] (II) USB Mouse: Configuring as mouse
[    10.514] (II) USB Mouse: Adding scrollwheel support
[    10.514] (**) USB Mouse: YAxisMapping: buttons 4 and 5
[    10.514] (**) USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    10.514] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input3/event3"
[    10.514] (II) XINPUT: Adding extended input device "USB Mouse" (type: MOUSE)
[    10.514] (II) USB Mouse: initialized for relative axes.
[    10.514] (**) USB Mouse: (accel) keeping acceleration scheme 1
[    10.514] (**) USB Mouse: (accel) acceleration profile 0
[    10.514] (**) USB Mouse: (accel) acceleration factor: 2.000
[    10.514] (**) USB Mouse: (accel) acceleration threshold: 4
[    10.514] (II) config/udev: Adding input device USB Mouse (/dev/input/mouse0)
[    10.515] (II) No input driver/identifier specified (ignoring)
[    10.521] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[    10.522] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    10.522] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    10.522] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    10.522] (**) AT Translated Set 2 keyboard: always reports core events
[    10.522] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[    10.522] (--) AT Translated Set 2 keyboard: Found keys
[    10.522] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[    10.522] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[    10.522] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[    10.522] (**) Option "xkb_rules" "evdev"
[    10.522] (**) Option "xkb_model" "pc105"
[    10.522] (**) Option "xkb_layout" "tr"
[    10.526] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event5)
[    10.527] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    10.527] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[    10.527] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    10.527] (**) HP WMI hotkeys: always reports core events
[    10.527] (**) HP WMI hotkeys: Device: "/dev/input/event5"
[    10.527] (--) HP WMI hotkeys: Found keys
[    10.527] (II) HP WMI hotkeys: Configuring as keyboard
[    10.527] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event5"
[    10.527] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD)
[    10.527] (**) Option "xkb_rules" "evdev"
[    10.527] (**) Option "xkb_model" "pc105"
[    10.527] (**) Option "xkb_layout" "tr"
[    20.528] (II) Power Button: Close
[    20.528] (II) UnloadModule: "evdev"
[    20.528] (II) Unloading evdev
[    20.556] (II) Video Bus: Close
[    20.556] (II) UnloadModule: "evdev"
[    20.556] (II) Unloading evdev
[    20.556] (II) Power Button: Close
[    20.556] (II) UnloadModule: "evdev"
[    20.556] (II) Unloading evdev
[    20.562] (II) USB Mouse: Close
[    20.562] (II) UnloadModule: "evdev"
[    20.562] (II) Unloading evdev
[    20.564] (II) AT Translated Set 2 keyboard: Close
[    20.564] (II) UnloadModule: "evdev"
[    20.564] (II) Unloading evdev
[    20.568] (II) HP WMI hotkeys: Close
[    20.568] (II) UnloadModule: "evdev"
[    20.568] (II) Unloading evdev
[    20.592]  ddxSigGiveUp: Closing log


[MrKowalski]

herhangi bir çözüme ulaşamadıgım için format atmayı düşünüyorum. konu kilitlenebilir.

[decent]

Elinde Ubuntu CD varsa normal onu yükledikten sonra,

Kod Seç Genişlet

sudo apt-get install xubuntu-desktop
komutu ile XFCE masaüstü kullanabilirsin, tavsiyemdir.

Yeniden kurulum tercih ettiğin için bu konuyu kilitliyorum.