Ubuntuda Klavye ve Tam ekran video sorunu.

[Neptunmavisi]

Merhaba, 

Ubuntu 10.10  Kullanıyorum.  İki sorunum  var yardımcı olursanız sevinirim.   

1. sorunum Klavye ile ilgili. Bir önceki Klavyemde Klavyemin bozulduğunu düşünmüştüm.  PS2 klavye idi. şimdilik klavye ise  Usb klavye fakat klavyeden değilmiş. sorunun anakartla ilgili oldunu düşünüyordum. Taki geçen gün kurulu olan ama hiç kullanmadğım aslında kazara kurduğum XP yi açıp biraz kullanmakla anladım. bu sorunu bir tek Ubuntu da görüyorum.  Klavyede herhangi bir tuşa bir kaç kez dokunma sonrası tuşlar cevap verebiliyor. ve yazarken yanlışlıkla bir tuşa dokunduğumda Backspace tuşuna bir kaç kez dokunduktan sonra anca söz konusu harfi silebiliyorum. tuşlar her zaman cevap vermiyor. klavye üzerindeki harlere dokunduğumda takılıyor tepki vermiyor. oyunlardada yine durum aynı.  sorunun ubuntu kullanırken olduğunu farketmem ise XP sayesinde oldu.  XP açtım kullandım hiç bir sorun yok.  tüm tuşları sorunsuz kullanabiliyorum.   XP kullanmıyorum kullanmamda. kazara kurmamın sebebi ise  Ubuntu dan önce PCLİNUXOS  kuruluydu. kerneli eski olduğunda yeni aldığım Wireless usb adaptoru tanımayınca Linux için henüz driverının çıkmadığını zannedip XP kurmak zorunda kalmıştım. sonra UBuntu cd sini taktığım Ubuntu nun güncel kernele sahip olduğundan driverının mevcut olduğunu görünce tekrar ubuntu kurdum. XP böylelikle kazara Bilgisayarıma girmiş oldu, sileceğim elbette, zaten Windows işletim sistemlerini kullanmıyorum.

2.sorunum ise Genelde TV ve Film izlerim. fakat Tam ekranda TV ve Film veya herhangi bir video izlediğimde sanki PC uyku moduna giriyormuş gibi monitor kapanıyor.  Film ve Videodanda ses kesiliyor Monitorde uyku moduna geçiyor. aynı sorunu yine XP ile yaşamıyorum.

Konu biraz uzun cümlelerden oluştu. okuduğunz için teşekkürler.

[ekremsenturk]

Sistem/Yönetim/Hardware Drivers aç ve devre dışı kalmışlarsa aktiv et veya kurulu görünmüyorsa, açtığında seçilenler kurulacaktır. (İnternet bağlıysa) Bu Video sorununu çözer.

[Neptunmavisi]

Ekran kartı sürücüleri kurulu. kurmadan nasıl tam ekran  video oynatsınki.

Sorunum hala devam ediyor.

[eribol]

2. sorun için uyku modu ayarını kapatmak kısmen çözüm olabilir. Ayrıca oynatıcının da ekran kilitleme özelliğini devre dışı bırakma yeteneği var ise oradan da yapılabilir. Smplayer'da olması lazım ama diğerleri hakkında bilgim yok.

1. Sorun için klavyeyi usb'ye takıp

Kod Seç Genişlet

dmesgkomutunu işletin. Çıktılar fikir verebilir. Ayrıca

Kod Seç Genişlet

lsusbkomutunun çıktısı da gerekebilir.

[Neptunmavisi]

Kod Seç Genişlet

neptun@neptun-desktop:~$ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.35-25-generic (buildd@palmer) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #44-Ubuntu SMP Fri Jan 21 17:40:48 UTC 2011 (Ubuntu 2.6.35-25.44-generic 2.6.35.10)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000006fef0000 (usable)
[    0.000000]  BIOS-e820: 000000006fef0000 - 000000006fef3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000006fef3000 - 000000006ff00000 (ACPI data)
[    0.000000]  BIOS-e820: 0000000070000000 - 0000000080000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f0000000 - 00000000f2000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] DMI 2.4 present.
[    0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x6fef0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-CFFFF uncachable
[    0.000000]   D0000-D7FFF write-back
[    0.000000]   D8000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FFC0000000 write-back
[    0.000000]   1 base 0040000000 mask FFE0000000 write-back
[    0.000000]   2 base 0060000000 mask FFF0000000 write-back
[    0.000000]   3 base 006FF00000 mask FFFFF00000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000001000 (reserved)
[    0.000000]  modified: 0000000000001000 - 0000000000002000 (usable)
[    0.000000]  modified: 0000000000002000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 000000000009f800 (usable)
[    0.000000]  modified: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000006fef0000 (usable)
[    0.000000]  modified: 000000006fef0000 - 000000006fef3000 (ACPI NVS)
[    0.000000]  modified: 000000006fef3000 - 000000006ff00000 (ACPI data)
[    0.000000]  modified: 0000000070000000 - 0000000080000000 (reserved)
[    0.000000]  modified: 00000000f0000000 - 00000000f2000000 (reserved)
[    0.000000]  modified: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] initial memory mapped : 0 - 00c00000
[    0.000000] found SMP MP-table at [c00f4ab0] f4ab0
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 15000-1a000
[    0.000000] RAMDISK: 375ac000 - 37ff0000
[    0.000000] Allocated new RAMDISK: 009a7000 - 013eac0c
[    0.000000] Move RAMDISK from 00000000375ac000 - 0000000037fefc0b to 009a7000 - 013eac0b
[    0.000000] ACPI: RSDP 000f6480 00014 (v00 GBT   )
[    0.000000] ACPI: RSDT 6fef3000 00038 (v01 GBT    NVDAACPI 42302E31 NVDA 01010101)
[    0.000000] ACPI: FACP 6fef3040 00074 (v01 GBT    NVDAACPI 42302E31 NVDA 01010101)
[    0.000000] ACPI: DSDT 6fef30c0 05272 (v01 GBT    NVDAACPI 00001000 MSFT 03000000)
[    0.000000] ACPI: FACS 6fef1800 00040
[    0.000000] ACPI: SSDT 6fef8400 00206 (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
[    0.000000] ACPI: HPET 6fef8640 00038 (v01 GBT    NVDAACPI 42302E31 NVDA 00000098)
[    0.000000] ACPI: MCFG 6fef8680 0003C (v01 GBT    NVDAACPI 42302E31 NVDA 01010101)
[    0.000000] ACPI: APIC 6fef8340 0008E (v01 GBT    NVDAACPI 42302E31 NVDA 01010101)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 902MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000001 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0006fef0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000001 -> 0x00000002
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0006fef0
[    0.000000] On node 0 totalpages: 458368
[    0.000000] free_area_init_node: node 0, pgdat c07fffc0, node_mem_map c13ec020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3952 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 1806 pages used for memmap
[    0.000000]   HighMem zone: 229348 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] early_res array is doubled to 64 at [16000 - 167ff]
[    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000010000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:70000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s36416 r0 d20928 u1048576
[    0.000000] pcpu-alloc: s36416 r0 d20928 u1048576 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 454786
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-25-generic root=UUID=82c27f4d-90ab-4878-abcb-0e94367893b3 ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] allocated 9169580 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Subtract (51 early reservations)
[    0.000000]   #1 [0000001000 - 0000002000]   EX TRAMPOLINE
[    0.000000]   #2 [0000100000 - 00009a2adc]   TEXT DATA BSS
[    0.000000]   #3 [00009a3000 - 00009a60f6]             BRK
[    0.000000]   #4 [00000f4ac0 - 0000100000]   BIOS reserved
[    0.000000]   #5 [00000f4ab0 - 00000f4ac0]    MP-table mpf
[    0.000000]   #6 [000009f800 - 00000f0f00]   BIOS reserved
[    0.000000]   #7 [00000f101c - 00000f4ab0]   BIOS reserved
[    0.000000]   #8 [00000f0f00 - 00000f101c]    MP-table mpc
[    0.000000]   #9 [0000010000 - 0000011000]      TRAMPOLINE
[    0.000000]   #10 [0000011000 - 0000015000]     ACPI WAKEUP
[    0.000000]   #11 [0000015000 - 0000016000]         PGTABLE
[    0.000000]   #12 [00009a7000 - 00013eb000]     NEW RAMDISK
[    0.000000]   #13 [00013eb000 - 00013ec000]         BOOTMEM
[    0.000000]   #14 [00013ec000 - 00021ec000]         BOOTMEM
[    0.000000]   #15 [00021ec000 - 00021ec004]         BOOTMEM
[    0.000000]   #16 [00021ec040 - 00021ec100]         BOOTMEM
[    0.000000]   #17 [00021ec100 - 00021ec154]         BOOTMEM
[    0.000000]   #18 [00021ec180 - 00021ef180]         BOOTMEM
[    0.000000]   #19 [00021ef180 - 00021ef1d8]         BOOTMEM
[    0.000000]   #20 [00021ef200 - 00021f2200]         BOOTMEM
[    0.000000]   #21 [00021f2200 - 00021f2225]         BOOTMEM
[    0.000000]   #22 [00021f2240 - 00021f2267]         BOOTMEM
[    0.000000]   #23 [00021f2280 - 00021f23d0]         BOOTMEM
[    0.000000]   #24 [00021f2400 - 00021f2440]         BOOTMEM
[    0.000000]   #25 [00021f2440 - 00021f2480]         BOOTMEM
[    0.000000]   #26 [00021f2480 - 00021f24c0]         BOOTMEM
[    0.000000]   #27 [00021f24c0 - 00021f2500]         BOOTMEM
[    0.000000]   #28 [00021f2500 - 00021f2540]         BOOTMEM
[    0.000000]   #29 [00021f2540 - 00021f2580]         BOOTMEM
[    0.000000]   #30 [00021f2580 - 00021f25c0]         BOOTMEM
[    0.000000]   #31 [00021f25c0 - 00021f2600]         BOOTMEM
[    0.000000]   #32 [00021f2600 - 00021f2640]         BOOTMEM
[    0.000000]   #33 [00021f2640 - 00021f2650]         BOOTMEM
[    0.000000]   #34 [00021f2680 - 00021f2690]         BOOTMEM
[    0.000000]   #35 [00021f26c0 - 00021f272a]         BOOTMEM
[    0.000000]   #36 [00021f2740 - 00021f27aa]         BOOTMEM
[    0.000000]   #37 [0002400000 - 000240e000]         BOOTMEM
[    0.000000]   #38 [0002500000 - 000250e000]         BOOTMEM
[    0.000000]   #39 [0002600000 - 000260e000]         BOOTMEM
[    0.000000]   #40 [0002700000 - 000270e000]         BOOTMEM
[    0.000000]   #41 [00021f47c0 - 00021f47c4]         BOOTMEM
[    0.000000]   #42 [00021f4800 - 00021f4804]         BOOTMEM
[    0.000000]   #43 [00021f4840 - 00021f4850]         BOOTMEM
[    0.000000]   #44 [00021f4880 - 00021f4890]         BOOTMEM
[    0.000000]   #45 [00021f48c0 - 00021f4960]         BOOTMEM
[    0.000000]   #46 [00021f4980 - 00021f49c8]         BOOTMEM
[    0.000000]   #47 [00021f4a00 - 00021f8a00]         BOOTMEM
[    0.000000]   #48 [00021f8a00 - 0002278a00]         BOOTMEM
[    0.000000]   #49 [0002278a00 - 00022b8a00]         BOOTMEM
[    0.000000]   #50 [000270e000 - 0002fccaac]         BOOTMEM
[    0.000000] Initializing HighMem for node 0 (000377fe:0006fef0)
[    0.000000] Memory: 1789736k/1833920k available (4933k kernel code, 43736k reserved, 2331k data, 688k init, 924616k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc0819000 - 0xc08c5000   ( 688 kB)
[    0.000000]       .data : 0xc05d17ce - 0xc08187a8   (2331 kB)
[    0.000000]       .text : 0xc0100000 - 0xc05d17ce   (4933 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] RCU-based detection of stalled CPUs is disabled.
[    0.000000] Verbose stalled-CPUs detection is disabled.
[    0.000000] NR_IRQS:2304 nr_irqs:712
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2099.936 MHz processor.
[    0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4199.87 BogoMIPS (lpj=8399744)
[    0.004014] pid_max: default: 32768 minimum: 301
[    0.004049] Security Framework initialized
[    0.004074] AppArmor: AppArmor initialized
[    0.004077] Yama: becoming mindful.
[    0.004152] Mount-cache hash table entries: 512
[    0.004328] Initializing cgroup subsys ns
[    0.004334] Initializing cgroup subsys cpuacct
[    0.004341] Initializing cgroup subsys memory
[    0.004353] Initializing cgroup subsys devices
[    0.004357] Initializing cgroup subsys freezer
[    0.004361] Initializing cgroup subsys net_cls
[    0.004392] CPU: Physical Processor ID: 0
[    0.004395] CPU: Processor Core ID: 0
[    0.004399] mce: CPU supports 5 MCE banks
[    0.004410] using C1E aware idle routine
[    0.004419] Performance Events: AMD PMU driver.
[    0.004428] ... version:                0
[    0.004430] ... bit width:              48
[    0.004433] ... generic registers:      4
[    0.004436] ... value mask:             0000ffffffffffff
[    0.004439] ... max period:             00007fffffffffff
[    0.004442] ... fixed-purpose events:   0
[    0.004444] ... event mask:             000000000000000f
[    0.008742] ACPI: Core revision 20100428
[    0.018350] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.018358] ftrace: allocating 21756 entries in 43 pages
[    0.020102] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.020509] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.061660] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ stepping 01
[    0.064000] Booting Node   0, Processors  #1
[    0.008000] Initializing CPU#1
[    0.148071] Brought up 2 CPUs
[    0.148074] Total of 2 processors activated (8399.87 BogoMIPS).
[    0.148336] devtmpfs: initialized
[    0.149049] regulator: core version 0.5
[    0.149088] Time:  8:51:23  Date: 02/20/11
[    0.149145] NET: Registered protocol family 16
[    0.149300] EISA bus registered
[    0.149306] node 0 link 0: io port [1000, fffff]
[    0.149310] TOM: 0000000080000000 aka 2048M
[    0.149313] node 0 link 0: mmio [f0000000, f1ffffff]
[    0.149317] node 0 link 0: mmio [f2000000, ffb7ffff]
[    0.149321] node 0 link 0: mmio [a0000, bffff]
[    0.149324] node 0 link 0: mmio [80000000, efffffff]
[    0.149327] bus: [00, ff] on node 0 link 0
[    0.149331] bus: 00 index 0 [io  0x0000-0xffff]
[    0.149333] bus: 00 index 1 [mem 0x80000000-0xffffffff]
[    0.149336] bus: 00 index 2 [mem 0x000a0000-0x000bffff]
[    0.149346] ACPI: bus type pci registered
[    0.149435] PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xf0000000-0xf1ffffff] (base 0xf0000000)
[    0.149439] PCI: MMCONFIG at [mem 0xf0000000-0xf1ffffff] reserved in E820
[    0.149441] PCI: Using MMCONFIG for extended config space
[    0.149443] PCI: Using configuration type 1 for base access
[    0.150521] Trying to unpack rootfs image as initramfs...
[    0.152035] bio: create slab <bio-0> at 0
[    0.153438] ACPI: EC: Look up EC in DSDT
[    0.159545] ACPI: Interpreter enabled
[    0.159550] ACPI: (supports S0 S3 S4 S5)
[    0.159573] ACPI: Using IOAPIC for interrupt routing
[    0.169267] ACPI: No dock devices found.
[    0.169271] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.169370] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.169563] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.169566] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.169569] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.169573] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
[    0.169576] pci_root PNP0A08:00: host bridge window [mem 0x6ff00000-0xfebfffff]
[    0.169755] pci 0000:00:01.1: reg 10: [io  0xd000-0xd03f]
[    0.169766] pci 0000:00:01.1: reg 20: [io  0x1c00-0x1c3f]
[    0.169770] pci 0000:00:01.1: reg 24: [io  0x1c40-0x1c7f]
[    0.169789] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.169795] pci 0000:00:01.1: PME# disabled
[    0.169845] pci 0000:00:02.0: reg 10: [mem 0xf5008000-0xf5008fff]
[    0.169868] pci 0000:00:02.0: supports D1 D2
[    0.169871] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.169874] pci 0000:00:02.0: PME# disabled
[    0.169893] pci 0000:00:02.1: reg 10: [mem 0xf5009000-0xf50090ff]
[    0.169920] pci 0000:00:02.1: supports D1 D2
[    0.169922] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.169925] pci 0000:00:02.1: PME# disabled
[    0.169949] pci 0000:00:04.0: reg 10: [mem 0xf5006000-0xf5006fff]
[    0.169971] pci 0000:00:04.0: supports D1 D2
[    0.169974] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.169977] pci 0000:00:04.0: PME# disabled
[    0.169997] pci 0000:00:04.1: reg 10: [mem 0xf5007000-0xf50070ff]
[    0.170023] pci 0000:00:04.1: supports D1 D2
[    0.170025] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.170029] pci 0000:00:04.1: PME# disabled
[    0.170060] pci 0000:00:06.0: reg 20: [io  0xf000-0xf00f]
[    0.170093] pci 0000:00:07.0: reg 10: [mem 0xf5000000-0xf5003fff]
[    0.170120] pci 0000:00:07.0: PME# supported from D3hot D3cold
[    0.170123] pci 0000:00:07.0: PME# disabled
[    0.170178] pci 0000:00:09.0: reg 10: [io  0x09f0-0x09f7]
[    0.170182] pci 0000:00:09.0: reg 14: [io  0x0bf0-0x0bf3]
[    0.170186] pci 0000:00:09.0: reg 18: [io  0x0970-0x0977]
[    0.170190] pci 0000:00:09.0: reg 1c: [io  0x0b70-0x0b73]
[    0.170194] pci 0000:00:09.0: reg 20: [io  0xec00-0xec0f]
[    0.170198] pci 0000:00:09.0: reg 24: [mem 0xf5004000-0xf5005fff]
[    0.170239] pci 0000:00:12.0: reg 10: [mem 0xf2000000-0xf2ffffff]
[    0.170245] pci 0000:00:12.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.170250] pci 0000:00:12.0: reg 1c: [mem 0xf3000000-0xf3ffffff 64bit]
[    0.170256] pci 0000:00:12.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.170389] pci 0000:00:08.0: PCI bridge to [bus 01-01] (subtractive decode)
[    0.170393] pci 0000:00:08.0:   bridge window [io  0xc000-0xcfff]
[    0.170397] pci 0000:00:08.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    0.170401] pci 0000:00:08.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.170405] pci 0000:00:08.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.170408] pci 0000:00:08.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.170411] pci 0000:00:08.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.170414] pci 0000:00:08.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    0.170417] pci 0000:00:08.0:   bridge window [mem 0x6ff00000-0xfebfffff] (subtractive decode)
[    0.170423] pci_bus 0000:00: on NUMA node 0
[    0.170427] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.170747] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[    0.211079] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.211216] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.211346] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.211477] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.211608] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.211742] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.211872] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.212012] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.212144] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.212277] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 *10 11 14 15)
[    0.212408] ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15)
[    0.212540] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15)
[    0.212671] ACPI: PCI Interrupt Link [LU1B] (IRQs 5 7 9 10 *11 14 15)
[    0.212802] ACPI: PCI Interrupt Link [LU2B] (IRQs 5 *7 9 10 11 14 15)
[    0.212932] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.213064] ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15)
[    0.213194] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.213326] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 *7 9 10 11 14 15)
[    0.213456] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.213588] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
[    0.213761] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[    0.213930] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[    0.214100] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[    0.214268] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[    0.214436] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[    0.214604] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[    0.214772] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[    0.214941] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[    0.215110] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0
[    0.215279] ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0
[    0.215449] ACPI: PCI Interrupt Link [AUB2] (IRQs 20 21 22 23) *0
[    0.215620] ACPI: PCI Interrupt Link [AU1B] (IRQs 20 21 22 23) *0
[    0.215790] ACPI: PCI Interrupt Link [AU2B] (IRQs 20 21 22 23) *0
[    0.215960] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
[    0.216148] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[    0.216319] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[    0.216488] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[    0.216658] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[    0.216830] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[    0.217000] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[    0.217048] HEST: Table is not found!
[    0.217157] vgaarb: device added: PCI:0000:00:12.0,decodes=io+mem,owns=io+mem,locks=none
[    0.217162] vgaarb: loaded
[    0.217344] SCSI subsystem initialized
[    0.217450] libata version 3.00 loaded.
[    0.217514] usbcore: registered new interface driver usbfs
[    0.217531] usbcore: registered new interface driver hub
[    0.217560] usbcore: registered new device driver usb
[    0.217794] ACPI: WMI: Mapper loaded
[    0.217797] PCI: Using ACPI for IRQ routing
[    0.217802] PCI: pci_cache_line_size set to 64 bytes
[    0.217854] reserve RAM buffer: 0000000000002000 - 000000000000ffff
[    0.217858] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[    0.217861] reserve RAM buffer: 000000006fef0000 - 000000006fffffff
[    0.217971] NetLabel: Initializing
[    0.217974] NetLabel:  domain hash size = 128
[    0.217975] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.217989] NetLabel:  unlabeled traffic allowed by default
[    0.218026] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.218033] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
[    0.218039] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    0.224035] Switching to clocksource hpet
[    0.237473] AppArmor: AppArmor Filesystem Enabled
[    0.237495] pnp: PnP ACPI init
[    0.237521] ACPI: bus type pnp registered
[    0.241460] pnp: PnP ACPI: found 11 devices
[    0.241463] ACPI: ACPI bus type pnp unregistered
[    0.241467] PnPBIOS: Disabled by ACPI PNP
[    0.241480] system 00:01: [io  0x1000-0x107f] has been reserved
[    0.241483] system 00:01: [io  0x1080-0x10ff] has been reserved
[    0.241486] system 00:01: [io  0x1400-0x147f] has been reserved
[    0.241489] system 00:01: [io  0x1480-0x14ff] has been reserved
[    0.241492] system 00:01: [io  0x1800-0x187f] has been reserved
[    0.241495] system 00:01: [io  0x1880-0x18ff] has been reserved
[    0.241499] system 00:01: [mem 0xfefe0000-0xfefe01ff] has been reserved
[    0.241503] system 00:01: [mem 0xfefe1000-0xfefe10ff] has been reserved
[    0.241507] system 00:01: [mem 0x70000000-0x7fffffff] has been reserved
[    0.241513] system 00:02: [io  0x04d0-0x04d1] has been reserved
[    0.241516] system 00:02: [io  0x0800-0x087f] has been reserved
[    0.241519] system 00:02: [io  0x0295-0x0314] has been reserved
[    0.241522] system 00:02: [io  0x0290-0x0294] has been reserved
[    0.241530] system 00:09: [mem 0xf0000000-0xf1ffffff] has been reserved
[    0.241537] system 00:0a: [mem 0x000d0000-0x000d3fff] has been reserved
[    0.241540] system 00:0a: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.241544] system 00:0a: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.241548] system 00:0a: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.241551] system 00:0a: [mem 0x6fef0000-0x6fefffff] could not be reserved
[    0.241555] system 00:0a: [mem 0xffff0000-0xffffffff] has been reserved
[    0.241559] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.241563] system 00:0a: [mem 0x00100000-0x6feeffff] could not be reserved
[    0.241566] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.241570] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.277954] pci 0000:00:12.0: BAR 6: assigned [mem 0x6ff00000-0x6ff1ffff pref]
[    0.277958] pci 0000:00:08.0: PCI bridge to [bus 01-01]
[    0.277961] pci 0000:00:08.0:   bridge window [io  0xc000-0xcfff]
[    0.277965] pci 0000:00:08.0:   bridge window [mem disabled]
[    0.277969] pci 0000:00:08.0:   bridge window [mem pref disabled]
[    0.277978] pci 0000:00:08.0: setting latency timer to 64
[    0.277982] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.277985] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.277988] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.277990] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[    0.277993] pci_bus 0000:00: resource 8 [mem 0x6ff00000-0xfebfffff]
[    0.277996] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
[    0.277999] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7]
[    0.278001] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff]
[    0.278004] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[    0.278007] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000dffff]
[    0.278010] pci_bus 0000:01: resource 8 [mem 0x6ff00000-0xfebfffff]
[    0.278053] NET: Registered protocol family 2
[    0.278127] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.278424] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.279098] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.279429] TCP: Hash tables configured (established 131072 bind 65536)
[    0.279431] TCP reno registered
[    0.279435] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.279450] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.279573] NET: Registered protocol family 1
[    0.329649] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.329701] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.329757] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.329764] pci 0000:00:12.0: Boot video device
[    0.329773] PCI: CLS 0 bytes, default 64
[    0.330018] cpufreq-nforce2: No nForce2 chipset.
[    0.330052] Scanning for low memory corruption every 60 seconds
[    0.330222] audit: initializing netlink socket (disabled)
[    0.330234] type=2000 audit(1298191883.328:1): initialized
[    0.341163] highmem bounce pool size: 64 pages
[    0.341168] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.343080] VFS: Disk quotas dquot_6.5.2
[    0.343157] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.343897] fuse init (API version 7.14)
[    0.344039] msgmni has been set to 1689
[    0.344565] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.344568] io scheduler noop registered
[    0.344570] io scheduler deadline registered
[    0.344590] io scheduler cfq registered (default)
[    0.344735] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.344769] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.345030] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.345038] ACPI: Power Button [PWRB]
[    0.345115] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.345119] ACPI: Power Button [PWRF]
[    0.345474] ACPI: acpi_idle registered with cpuidle
[    0.350599] ERST: Table is not found!
[    0.350926] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.352866] brd: module loaded
[    0.353641] loop: module loaded
[    0.354006] pata_acpi 0000:00:06.0: setting latency timer to 64
[    0.354495] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[    0.354503]   alloc irq_desc for 23 on node -1
[    0.354506]   alloc kstat_irqs on node -1
[    0.354517] pata_acpi 0000:00:09.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[    0.354536] pata_acpi 0000:00:09.0: setting latency timer to 64
[    0.354545] pata_acpi 0000:00:09.0: PCI INT A disabled
[    0.354991] Fixed MDIO Bus: probed
[    0.355038] PPP generic driver version 2.4.2
[    0.355091] tun: Universal TUN/TAP device driver, 1.6
[    0.355093] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.355217] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.355725] ACPI: PCI Interrupt Link [AUB2] enabled at IRQ 22
[    0.355728]   alloc irq_desc for 22 on node -1
[    0.355731]   alloc kstat_irqs on node -1
[    0.355738] ehci_hcd 0000:00:02.1: PCI INT B -> Link[AUB2] -> GSI 22 (level, low) -> IRQ 22
[    0.355754] ehci_hcd 0000:00:02.1: setting latency timer to 64
[    0.355758] ehci_hcd 0000:00:02.1: EHCI Host Controller
[    0.355810] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[    0.355836] ehci_hcd 0000:00:02.1: debug port 1
[    0.355844] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[    0.355868] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf5009000
[    0.355917] isapnp: Scanning for PnP cards...
[    0.404787] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    0.404943] hub 1-0:1.0: USB hub found
[    0.404950] hub 1-0:1.0: 5 ports detected
[    0.405286] ACPI: PCI Interrupt Link [AU2B] disabled and referenced, BIOS bug
[    0.405483] ACPI: PCI Interrupt Link [AU2B] enabled at IRQ 21
[    0.405487]   alloc irq_desc for 21 on node -1
[    0.405490]   alloc kstat_irqs on node -1
[    0.405497] ehci_hcd 0000:00:04.1: PCI INT B -> Link[AU2B] -> GSI 21 (level, low) -> IRQ 21
[    0.405507] ehci_hcd 0000:00:04.1: setting latency timer to 64
[    0.405510] ehci_hcd 0000:00:04.1: EHCI Host Controller
[    0.405567] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
[    0.405588] ehci_hcd 0000:00:04.1: debug port 1
[    0.405595] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
[    0.405614] ehci_hcd 0000:00:04.1: irq 21, io mem 0xf5007000
[    0.449037] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[    0.449175] hub 2-0:1.0: USB hub found
[    0.449180] hub 2-0:1.0: 5 ports detected
[    0.449258] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.449747] ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 20
[    0.449751]   alloc irq_desc for 20 on node -1
[    0.449753]   alloc kstat_irqs on node -1
[    0.449760] ohci_hcd 0000:00:02.0: PCI INT A -> Link[AUBA] -> GSI 20 (level, low) -> IRQ 20
[    0.449769] ohci_hcd 0000:00:02.0: setting latency timer to 64
[    0.449772] ohci_hcd 0000:00:02.0: OHCI Host Controller
[    0.449818] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
[    0.449844] ohci_hcd 0000:00:02.0: irq 20, io mem 0xf5008000
[    0.513232] Freeing initrd memory: 10512k freed
[    0.522590] hub 3-0:1.0: USB hub found
[    0.522599] hub 3-0:1.0: 5 ports detected
[    0.523031] ACPI: PCI Interrupt Link [AU1B] enabled at IRQ 23
[    0.523038] ohci_hcd 0000:00:04.0: PCI INT A -> Link[AU1B] -> GSI 23 (level, low) -> IRQ 23
[    0.523061] ohci_hcd 0000:00:04.0: setting latency timer to 64
[    0.523065] ohci_hcd 0000:00:04.0: OHCI Host Controller
[    0.523128] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
[    0.523165] ohci_hcd 0000:00:04.0: irq 23, io mem 0xf5006000
[    0.578618] hub 4-0:1.0: USB hub found
[    0.578623] hub 4-0:1.0: 5 ports detected
[    0.578693] uhci_hcd: USB Universal Host Controller Interface driver
[    0.578798] PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12
[    0.578801] PNP: PS/2 controller doesn't have KBD irq; using default 1
[    0.579232] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.579240] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.579369] mice: PS/2 mouse device common for all mice
[    0.579531] rtc_cmos 00:05: RTC can wake from S4
[    0.579579] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.579615] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    0.579767] device-mapper: uevent: version 1.0.3
[    0.579915] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[    0.579997] device-mapper: multipath: version 1.1.1 loaded
[    0.580000] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.580148] EISA: Probing bus 0 at eisa.0
[    0.580152] EISA: Cannot allocate resource for mainboard
[    0.580155] Cannot allocate resource for EISA slot 1
[    0.580157] Cannot allocate resource for EISA slot 2
[    0.580159] Cannot allocate resource for EISA slot 3
[    0.580162] Cannot allocate resource for EISA slot 4
[    0.580164] Cannot allocate resource for EISA slot 5
[    0.580167] Cannot allocate resource for EISA slot 6
[    0.580169] Cannot allocate resource for EISA slot 7
[    0.580171] Cannot allocate resource for EISA slot 8
[    0.580173] EISA: Detected 0 cards.
[    0.580296] cpuidle: using governor ladder
[    0.580298] cpuidle: using governor menu
[    0.580636] TCP cubic registered
[    0.580813] NET: Registered protocol family 10
[    0.581240] lo: Disabled Privacy Extensions
[    0.581504] NET: Registered protocol family 17
[    0.581541] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ (2 cpu cores) (version 2.20.00)
[    0.581593] powernow-k8:    0 : fid 0xd (2100 MHz), vid 0xa
[    0.581596] powernow-k8:    1 : fid 0xc (2000 MHz), vid 0xb
[    0.581599] powernow-k8:    2 : fid 0xa (1800 MHz), vid 0xd
[    0.581601] powernow-k8:    3 : fid 0x2 (1000 MHz), vid 0x12
[    0.623542] Using IPI No-Shortcut mode
[    0.623664] PM: Resume from disk failed.
[    0.623678] registered taskstats version 1
[    0.623882]   Magic number: 15:662:877
[    0.623991] rtc_cmos 00:05: setting system clock to 2011-02-20 08:51:24 UTC (1298191884)
[    0.623995] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.624011] EDD information not available.
[    0.710993] isapnp: No Plug & Play device found
[    0.711020] Freeing unused kernel memory: 688k freed
[    0.711542] Write protecting the kernel text: 4936k
[    0.711591] Write protecting the kernel read-only data: 1976k
[    0.742434] udev[75]: starting version 163
[    0.836042] usb 1-2: new high speed USB device using ehci_hcd and address 3
[    0.875596] pata_amd 0000:00:06.0: version 0.4.1
[    0.875660] pata_amd 0000:00:06.0: setting latency timer to 64
[    0.899664] scsi0 : pata_amd
[    0.933333] scsi1 : pata_amd
[    0.934080] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    0.934084] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    0.938401] ahci 0000:00:09.0: version 3.0
[    0.938421] ahci 0000:00:09.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[    0.938491] ahci 0000:00:09.0: controller can't do PMP, turning off CAP_PMP
[    0.938556] ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
[    0.938561] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pio
[    0.938566] ahci 0000:00:09.0: setting latency timer to 64
[    0.942733] scsi2 : ahci
[    0.942970] scsi3 : ahci
[    0.943106] scsi4 : ahci
[    0.943233] scsi5 : ahci
[    0.943378] ata3: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 23
[    0.943382] ata4: SATA max UDMA/133 abar m8192@0xf5004000 port 0xf5004180 irq 23
[    0.943386] ata5: SATA max UDMA/133 abar m8192@0xf5004000 port 0xf5004200 irq 23
[    0.943389] ata6: SATA max UDMA/133 abar m8192@0xf5004000 port 0xf5004280 irq 23
[    1.096425] ata1.00: ATAPI: HL-DT-STDVD-RAM GSA-H55N, 1.03, max UDMA/66
[    1.096454] ata1: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5000000) ACPI=0x1f01f (30:600:0x13)
[    1.112363] ata1.00: configured for UDMA/66
[    1.114867] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVD-RAM GSA-H55N 1.03 PQ: 0 ANSI: 5
[    1.118993] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.118998] Uniform CD-ROM driver Revision: 3.20
[    1.119140] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.119220] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.119317] ata2: port disabled. ignoring.
[    1.260024] ata6: SATA link down (SStatus 0 SControl 300)
[    1.260029] ata4: SATA link down (SStatus 0 SControl 300)
[    1.260054] ata5: SATA link down (SStatus 0 SControl 300)
[    1.288016] usb 3-1: new low speed USB device using ohci_hcd and address 2
[    1.545320] usbcore: registered new interface driver hiddev
[    1.558893] input:   USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1:1.0/input/input2
[    1.559002] generic-usb 0003:1241:1603.0001: input,hidraw0: USB HID v1.10 Keyboard [  USB Keyboard] on usb-0000:00:02.0-1/input0
[    1.583464] input:   USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1:1.1/input/input3
[    1.583529] generic-usb 0003:1241:1603.0002: input,hidraw1: USB HID v1.10 Device [  USB Keyboard] on usb-0000:00:02.0-1/input1
[    1.583550] usbcore: registered new interface driver usbhid
[    1.583552] usbhid: USB HID core driver
[    1.664024] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.665196] ata3.00: HPA unlocked: 488395055 -> 488397168, native 488397168
[    1.665203] ata3.00: ATA-7: ST3250410AS, 3.AAC, max UDMA/133
[    1.665206] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.665890] ata3.00: configured for UDMA/133
[    1.666061] scsi 2:0:0:0: Direct-Access     ATA      ST3250410AS      3.AA PQ: 0 ANSI: 5
[    1.666269] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    1.666284] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    1.666373] sd 2:0:0:0: [sda] Write Protect is off
[    1.666376] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.666423] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.666631]  sda: sda1 < sda5 sda6 > sda2
[    1.694535] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.078751] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   12.220663] udev[358]: starting version 163
[   12.308369] lp: driver loaded but no devices found
[   12.388667] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[   12.461466] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
[   12.461505] i2c i2c-1: nForce2 SMBus adapter at 0x1c40
[   12.462876] Linux agpgart interface v0.103
[   12.637176] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[   12.659050] psmouse serio1: ID: 10 00 64
[   12.696160] cfg80211: Calling CRDA to update world regulatory domain
[   12.769205] type=1400 audit(1298184696.642:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=649 comm="apparmor_parser"
[   12.769507] type=1400 audit(1298184696.642:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=649 comm="apparmor_parser"
[   12.769679] type=1400 audit(1298184696.642:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=649 comm="apparmor_parser"
[   12.773084] cfg80211: World regulatory domain updated:
[   12.773088]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   12.773091]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.773095]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.773097]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.773100]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.773103]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.788368] nvidia: module license 'NVIDIA' taints kernel.
[   12.788372] Disabling lock debugging due to kernel taint
[   12.927671] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
[   12.927679] HDA Intel 0000:00:07.0: PCI INT A -> Link[AAZA] -> GSI 22 (level, low) -> IRQ 22
[   12.927684] hda_intel: Disable MSI for Nvidia chipset
[   12.927721] HDA Intel 0000:00:07.0: setting latency timer to 64
[   13.160279] usb 1-2: ath9k_htc: Transferred FW: ar9271.fw, size: 51280
[   13.268663] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
[   13.301945] type=1400 audit(1298184697.174:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=820 comm="apparmor_parser"
[   13.306405] type=1400 audit(1298184697.178:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=821 comm="apparmor_parser"
[   13.306704] type=1400 audit(1298184697.178:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=821 comm="apparmor_parser"
[   13.306878] type=1400 audit(1298184697.178:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=821 comm="apparmor_parser"
[   13.323251] type=1400 audit(1298184697.194:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=824 comm="apparmor_parser"
[   13.329453] type=1400 audit(1298184697.202:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=822 comm="apparmor_parser"
[   13.329872] type=1400 audit(1298184697.202:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=824 comm="apparmor_parser"
[   14.156525] ath: EEPROM regdomain: 0x809c
[   14.156528] ath: EEPROM indicates we should expect a country code
[   14.156531] ath: doing EEPROM country->regdmn map search
[   14.156533] ath: country maps to regdmn code: 0x52
[   14.156536] ath: Country alpha2 being used: CN
[   14.156538] ath: Regpair used: 0x52
[   14.162505] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 21
[   14.162515] nvidia 0000:00:12.0: PCI INT A -> Link[AIGP] -> GSI 21 (level, low) -> IRQ 21
[   14.162524] nvidia 0000:00:12.0: setting latency timer to 64
[   14.162531] vgaarb: device changed decodes: PCI:0000:00:12.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   14.163481] NVRM: loading NVIDIA UNIX x86 Kernel Module  260.19.06  Mon Sep 13 06:35:06 PDT 2010
[   14.176271] cfg80211: Calling CRDA for country: CN
[   14.178337] Registered led device: ath9k-phy0::radio
[   14.178367] Registered led device: ath9k-phy0::assoc
[   14.178394] Registered led device: ath9k-phy0::tx
[   14.178420] Registered led device: ath9k-phy0::rx
[   14.178423] usb 1-2: ath9k_htc: USB layer initialized
[   14.178461] usbcore: registered new interface driver ath9k_hif_usb
[   14.187398] cfg80211: Regulatory domain changed to country: CN
[   14.187402]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   14.187406]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   14.187409]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[   14.288734] ppdev: user-space parallel port driver
[   14.515048] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   17.599179] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=0
[   21.023082] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=0
[   24.156051] wlan0: authenticate with MAC ADRESİ (try 1)
[   24.158805] wlan0: authenticated
[   24.174540] wlan0: associate witH MAC ADRESİ (try 1)
[   24.372593] wlan0: associate with MAC ADRESİ (try 2)
[   24.380548] wlan0: RX AssocResp from MAC ADRESİ (capab=0x421 status=0 aid=1)
[   24.380555] wlan0: associated
[   24.392343] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   24.392427] cfg80211: Calling CRDA for country: TR
[   24.411311] cfg80211: Disabling channel 2484 MHz on phy0 due to Country IE
[   24.411319] cfg80211: Regulatory domain changed to country: TR
[   24.411322]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   24.411325]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   24.411328]     (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[   24.411330]     (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[   34.408514] wlan0: no IPv6 routers present
[   70.344656] wlan0: deauthenticating from MAC ADRESİ by local choice (reason=3)
[   70.372764] cfg80211: All devices are disconnected, going to restore regulatory settings
[   70.372773] cfg80211: Restoring regulatory settings
[   70.372778] cfg80211: Calling CRDA to update world regulatory domain
[   70.378795] cfg80211: World regulatory domain updated:
[   70.378799]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   70.378803]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   70.378806]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   70.378809]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   70.378812]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   70.378815]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   78.504026] Clocksource tsc unstable (delta = -129922039 ns)
[  740.716335] wlan0: authenticate with MAC ADRESİ (try 1)
[  740.729177] wlan0: authenticated
[  740.729237] wlan0: associate with  MAC ADRESİ (try 1)
[  740.731894] wlan0: RX AssocResp from MAC ADRESİ (capab=0x31 status=0 aid=2)
[  740.731903] wlan0: associated
[19094.226988] lo: Disabled Privacy Extensions
[22076.492051] No probe response from AP MAC ADRESİ after 500ms, disconnecting.
[22076.538384] cfg80211: All devices are disconnected, going to restore regulatory settings
[22076.538400] cfg80211: Restoring regulatory settings
[22076.538409] cfg80211: Calling CRDA to update world regulatory domain
[22076.552096] cfg80211: World regulatory domain updated:
[22076.552103]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[22076.552111]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[22076.552117]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[22076.552124]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[22076.552130]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[22076.552136]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[22078.548366] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[22095.982187] wlan0: authenticate with MAC ADRESİ (try 1)
[22095.984603] wlan0: authenticated
[22095.984665] wlan0: associate with MAC ADRESİ  (try 1)
[22095.986688] wlan0: RX AssocResp from MAC ADRESİ (capab=0x31 status=0 aid=2)
[22095.986696] wlan0: associated
[22095.996173] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[22106.352529] wlan0: no IPv6 routers present
neptun@neptun-desktop:~$


Kod Seç Genişlet

neptun@neptun-desktop:~$ lsusb
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 1241:1603 Belkin Keyboard
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0cf3:9271 Atheros Communications, Inc. AR9271 802.11n
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
neptun@neptun-desktop:~$


dmesg çıktısında, mac adresi yazan satırlardan mac adreslerini sildim. MAC ADRESİ  yazdım.  mac adresleri kişiye özel olduğundan silmeyi uygun gördüm.

Teşekkürler.

[heartsmagic]

Çalışan CD ile de bu klavye sorunu mevcut mu?

[Neptunmavisi]

Hayır, daha doğrusu kurdum aradan bir kaç gün geçtikten sonra bu Klavye sorunu başladı. 

[heartsmagic]

O aradaki birkaç gün önemli. Sıfır kurulumda bu sorun olmuyor yani?

[Neptunmavisi]

evet,  sıfır kurulumda hiç bir sorun yok. kurduktan sonra yaşadım bu sorunu.

[heartsmagic]

İşte bu durumda biraz karışıyor durumlar. Arada neler kuruldu, neler güncellendi bilemediğimiz için sorunu tahmin etmemiz de güçleşiyor. Üst sürümden bir çekirdek kurmayı deneyebilirsin.

[Neptunmavisi]

heartsmagic,  Teşekkürler.  emek ve zamn harcadınız. sizide rahatsız ettim kusuruma bakmayın.  sıfırdan kernel derlemeyi maalesef bilmiyorum.  Wiki ye bakacam kolay ise derlerim. değilse mecbur böyle kullanmaya devam.  evet Ubuntu kurduktan sonra bir çok farklı yazılım kurdumda. fakat bildiğim Linuxta Windows gibi program kurulduğunda sistem kararlılığını etkilememesi.

artık bakarım bir çaresine.  yardımcı olan herkese teşekkürler.

[sema]

@heartsmagic'in kastettiği sıfırdan elle çekirdek derleme değil sanırım , çekirdeği bir üst sürümdeki çekirdeğe yükseltme olarak anladım ben. Şuna bakalım;

Kod Seç Genişlet

uname -r

[heartsmagic]

@Neptunmavisi, @sema'nın dediği gibi sıfırdan derlemeyi kastetmiyorum, en üst sürümdeki çekirdek paketlerini kurmaktan bahsediyorum.
http://kernel.ubuntu.com/~kernel-ppa/mainline/v2.6.37-rc2-maverick/
Buradaki çekirdeklerden kendi mimarine göre olan iki paketi, ilaveten ortadaki paketi çekip hepsini bir arada kuracaksın.

Yazılım kurmak Linux'un kararlılığı bozulur mu bozulmaz mı bu tartışılır Aslında kararlılık konusu tartışılır. Fakat bu türde sorunların yaşanabileceği her zaman bilinmeli, zira hiçbir sistem bir diğeriyle aynı yapılandırmaya ve donanıma sahip değil.