ubuntu 10.10 açılmıyor

[kiltan]

Şu an fstab ile ilgili bir sorun yok gibi. Sistemi açmaya çalıştığında Grub menüsünde e'ye bas ve çekirdek satırının sonundaki queit ve splash kısımlarını sil, ardından sistemi Ctrl+x ile başlat. Tuşlara dokunma, nerede bekliyor bir bak. Eğer hata çıktısı veriyorsa onu buraya aktar.

quiet ve splash'ı sildim ve başlattım hiç bir fark olmadı, sistem eğer tuşlara sürekli basılmazsa açılmıyor 15 dakika bekledim açılmadı,

[heartsmagic]

O bekleme esnasında ekranda ne görünüyor?

[kiltan]

O bekleme esnasında ekranda ne görünüyor?

hiç dokunmadım ve hiç * bir şey çıkmadı ve 15 dakika sonra
disk sürücüleriniz hatalar için denetleniyor, bu biraz vakit alabir
prerss C to cancel gibi bi bildirim çıktı
yaklaşık yarım saat bekledim ve tabi, hiç bi kontrol olmadı c yle vazgeçtim hiç ilerleme olmadı OK yazdı ve dondu gibi 3 dakika kadar yön tuşlarıyla sürekli basarak fare imleci çıktı basmazsam kesinlikle çıkmıyor, o şekilde saatlerce de beklesem kalıyor
fare imleci çıkınca tuşlara süreklki basarsam tabi ki açılış sesi duyuluyor tuşlara basmayı bırakınca açılış sesi gelmiş olsa dahi, yine açılmıyor aynı ekran donup duruyor güncelleme yaptım güncellemeleri çok hızlı bi şekilde indirdi fakat, güncellemeleri uygularken yine donuyor duruyor . tuslara basınca devam ediyor onuda oyle tamamladım

[bytan]

Makinanı canlı cd ile aç ve ubuntu kurulu bölümü sisteme bağlamadan alttaki komutu yürüt ve daha sonra duruma tekrar bak:

Kod Seç Genişlet

sudo fsck -a /dev/sda6

[kiltan]

Makinanı canlı cd ile aç ve ubuntu kurulu bölümü sisteme bağlamadan alttaki komutu yürüt ve daha sonra duruma tekrar bak:

Kod Seç Genişlet

sudo fsck -a /dev/sda6

To run a command as administrator (user "root"), use "sudo <command>".
See "man sudo_root" for details.

ubuntu@ubuntu:~$ sudo fsck -a /dev/sda6
fsck from util-linux-ng 2.17.2
fsck.ext2: No such file or directory - /dev/sda6 açılmaya çalışılırken hata oluştu
/dev/sda6:
Süper blok okunamıyor ya da doğru ext2 dosya sistemi tanımlamıyor.
Aygıt geçerliyse ve gerçekten bir ext2 dosya sistemi içeriyorsa,
(ve bir takas bölümü veya ufs ya da her neyse değilse)
süper blok bozulmuş demektir. Başka bir süper blok ile e2fsck çalıştırmayı
denemelisiniz:
      e2fsck -b 8193 <aygıt>

ubuntu@ubuntu:~$
hata bu yardım ederseniz sevinirim, şunuda eklemek istiyorum sistemi live usb'yle açarkende o kadar değil ama aynı takılmalar mevcut bazı hatalar veriyor, açılırken:

/init:line 7: can't open /dev/sda: no medium found
stdin: error 0

bu iki hata defalarca cıkıyor ve

warning: unable to find the persistent medium
warning: impossible to include the home -sn snaphot   ve buna benzer birkaç hata daha mevcut

[heartsmagic]

Canlı CD ile sistemi açıp buraya bir kere daha

Kod Seç Genişlet

sudo fdisk -l çıktısını geçer misin? Zira ya bölüm sıralamasında bir sorun oluşmuş ya da diskinin o bölümünde bir sorun var.

[kiltan]

Canlı CD ile sistemi açıp buraya bir kere daha

Kod Seç Genişlet

sudo fdisk -l çıktısını geçer misin? Zira ya bölüm sıralamasında bir sorun oluşmuş ya da diskinin o bölümünde bir sorun var.

dosya sistemi geçerli ext2 değil diyor bu normalmi hata sırasında ama sistem ext4?


ubuntu@ubuntu:~$ sudo fdisk -l

Disk /dev/sdb: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xd5801af6

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1   *           1        5099    40957686    7  HPFS/NTFS
/dev/sdb2            5100       19458   115332300    f  W95 Ext'd (LBA)
/dev/sdb5            5100       15298    81923436    7  HPFS/NTFS
/dev/sdb6           15299       19189    31249408   83  Linux
/dev/sdb7           19189       19458     2157568   82  Linux swap / Solaris

Disk /dev/sdc: 8011 MB, 8011120640 bytes
255 heads, 63 sectors/track, 973 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xa257a235

   Device Boot      Start         End      Blocks   Id  System
/dev/sdc1   *           1         974     7823328+   b  W95 FAT32
Partition 1 has different physical/logical endings:
     phys=(972, 254, 63) logical=(973, 245, 40)

[heartsmagic]

Nasıl oldu hiçbir fikrim yok ancak şu an diskin sdb olarak görünmekte. Haliyle işler değişmiş durumda. Aşağıdaki adımları uygula.

1.
sudo umount /dev/sdb6
sudo fsck -a /dev/sdb6

2.

Kod Seç Genişlet

sudo mkdir /media/ubu
sudo mount /dev/sdb6 /media/ubu
sudo gedit /media/ubu/etc/fstab

swap için eklediğin satırdaki sda7 kısmını sdb7 olarak değiştir, kaydedip kapat. Ardından sistemi yeniden başlat. Durumu bir daha bakalım. Bu arada Canlı Cd ile blkid komutunu kullanarak eski çıktılarla bir kere daha karşılaştırabilirsin, hoş onların değiştiğini sanmıyorum ancak emin olalım.

[kiltan]

Nasıl oldu hiçbir fikrim yok ancak şu an diskin sdb olarak görünmekte. Haliyle işler değişmiş durumda. Aşağıdaki adımları uygula.

1.
sudo umount /dev/sdb6
sudo fsck -a /dev/sdb6

2.

Kod Seç Genişlet

sudo mkdir /media/ubu
sudo mount /dev/sdb6 /media/ubu
sudo gedit /media/ubu/etc/fstab

swap için eklediğin satırdaki sda7 kısmını sdb7 olarak değiştir, kaydedip kapat. Ardından sistemi yeniden başlat. Durumu bir daha bakalım. Bu arada Canlı Cd ile blkid komutunu kullanarak eski çıktılarla bir kere daha karşılaştırabilirsin, hoş onların değiştiğini sanmıyorum ancak emin olalım.

emin değilim fakat, acaba sistemi normal açınca sda6 canlı usb'yle açınca sdb6 olarak görüyor olma ihtimali varmıdır ki şu an canlı sistem olarak kullanıyorum, komut ve çıktılar ise şöyle yaptım


ubuntu@ubuntu:~$ sudo umount /dev/sdb6
umount: /dev/sdb6: not mounted
ubuntu@ubuntu:~$ sudo fsck -a /dev/sdb6
fsck from util-linux-ng 2.17.2
/dev/sdb6 denetlenmeksizin 22 kere bağlandı, denetim başlatılacak.
/dev/sdb6: 143389/1954064 files (0.2% non-contiguous), 903572/7812352 blocks
ubuntu@ubuntu:~$ sudo mkdir /media/ubu
ubuntu@ubuntu:~$ sudo mount /dev/sdb6 /media/ubu
ubuntu@ubuntu:~$ sudo gedit /media/ubu/etc/fstab

# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    nodev,noexec,nosuid 0       0
# / was on /dev/sdb6 during installation
UUID=71a46f12-7e88-4d3b-80de-0436abea3eca /               ext4    errors=remount-ro 0       1
/dev/sdb7  none            swap    sw              0       0

[bytan]

Değişikliği yapmışsın. Eğer / dizin için uuid değeri de tutuyorsa sistemi sabit diskten yeniden başlat ve durumu görelim. Eğer yine beklerse geçici olarak / dizine ait satırdaki 0 1 değerini 0 0 yapıp kaydedip duruma bak.

[kiltan]

Değişikliği yapmışsın. Eğer / dizin için uuid değeri de tutuyorsa sistemi sabit diskten yeniden başlat ve durumu görelim. Eğer yine beklerse geçici olarak / dizine ait satırdaki 0 1 değerini 0 0 yapıp kaydedip duruma bak.

sayın baytan anlayamadım ama. sistemi sabit diskten açtım, yine bekledi ve bir hata verdi;
skipping profile in /etc/apparmor.d/disable:usr.bin.firefox
*setting sensors limits                       (OK)

en önemlisi sanırım, sistem usb bellekten canlı olarak açınca sdb idi fakat şimdi sabit diskten açınca sda olarak görünüyor bu fdisk -l cıktısıdır,

turgut@ubunturgut:~$ sudo fdisk -l
[sudo] password for turgut:

Disk /dev/sda: 160.0 GB, 160041885696 bayt
255 heads, 63 sectors/track, 19457 cylinders
Units = silindir of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk kimlikleyicisi: 0xd5801af6

   Aygıt Açılış    Başlangıç     Bitiş  BlokSayısı Kml Sistem
/dev/sda1   *           1        5099    40957686    7  HPFS/NTFS
/dev/sda2            5100       19458   115332300    f  W95 Ext'd (LBA)
/dev/sda5            5100       15298    81923436    7  HPFS/NTFS
/dev/sda6           15299       19189    31249408   83  Linux
/dev/sda7           19189       19458     2157568   82  Linux takas / Solaris
turgut@ubunturgut:~$

[bytan]

Nasıl açılıyor o halde? Hiçbir şey anlamadım.

Şu an sistemin açıkken mount ne diyor?

Kod Seç Genişlet

mount


Fstab dosyandaki sdb'leri tekrar sda yapıp kaydedip kapat ve usb belleğini makinana takmadan sabit diskten başlatmaya çalışıp bekleyip beklemediğine bak.

[kiltan]

turgut@ubunturgut:~$ mount
/dev/sda6 on / type ext4 (rw,errors=remount-ro,commit=0)
proc on /proc type proc (rw,noexec,nosuid,nodev)
none on /sys type sysfs (rw,noexec,nosuid,nodev)
fusectl on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /dev type devtmpfs (rw,mode=0755)
none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
none on /dev/shm type tmpfs (rw,nosuid,nodev)
none on /var/run type tmpfs (rw,nosuid,mode=0755)
none on /var/lock type tmpfs (rw,noexec,nosuid,nodev)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
gvfs-fuse-daemon on /home/turgut/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=turgut)
turgut@ubunturgut:~$


sistemi fstab kısmını sda olarak düzelttim ve 0  1 olan kısmı   0    0  yaparak yeniden başlattım fakat sonuç aynı ama hata görünmedi,

[bytan]

Açıldıktan sonra ilk vereceğin komutlar alttakiler olsun ve bize bunun çıktısını aktar. Görebilirsek nerede durduğunu görmeye çalışalım:

Kod Seç Genişlet

dmesg

ve

Kod Seç Genişlet

dmesg | tail

Çıktıları biraz uzundur. Bu sebeple iletini yazarken kod etiketlerini kullan.

Mesajlarda code etiketi

[kiltan]

sistem açılırken bir hata verdi: ve fstab daki 0  1  değerrini 0   0  yapmıştım ve halen aynı bu neyi etkiliyor acaba?
[150.876660] phy0 - rt2800pci-mcu-status:Error - MCU request failed, no response from hardware

Kod Seç Genişlet

[    0.350835] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.350898] vgaarb: loaded
[    0.352127] SCSI subsystem initialized
[    0.352574] libata version 3.00 loaded.
[    0.352953] usbcore: registered new interface driver usbfs
[    0.353050] usbcore: registered new interface driver hub
[    0.353223] usbcore: registered new device driver usb
[    0.355067] ACPI: WMI: Mapper loaded
[    0.355082] PCI: Using ACPI for IRQ routing
[    0.355099] PCI: pci_cache_line_size set to 64 bytes
[    0.355399] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[    0.355420] reserve RAM buffer: 000000003f6d0000 - 000000003fffffff
[    0.356083] NetLabel: Initializing
[    0.356098] NetLabel:  domain hash size = 128
[    0.356108] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.356179] NetLabel:  unlabeled traffic allowed by default
[    0.356400] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.356426] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.356457] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.360170] Switching to clocksource tsc
[    0.418316] AppArmor: AppArmor Filesystem Enabled
[    0.418383] pnp: PnP ACPI init
[    0.418460] ACPI: bus type pnp registered
[    0.431314] pnp: PnP ACPI: found 10 devices
[    0.431329] ACPI: ACPI bus type pnp unregistered
[    0.431349] PnPBIOS: Disabled by ACPI PNP
[    0.431411] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[    0.431433] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.431454] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.431474] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.431495] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.431515] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.431577] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.431598] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.431644] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.431687] system 00:06: [io  0x0800-0x080f] has been reserved
[    0.431708] system 00:06: [io  0x1000-0x107f] has been reserved
[    0.431730] system 00:06: [io  0x1180-0x11bf] has been reserved
[    0.431753] system 00:06: [mem 0xff800000-0xff800fff] has been reserved
[    0.478419] pci 0000:00:1c.0: BAR 15: assigned [mem 0x40000000-0x401fffff 64bit pref]
[    0.478447] pci 0000:00:1c.1: BAR 14: assigned [mem 0x40200000-0x405fffff]
[    0.478472] pci 0000:00:1c.0: BAR 13: assigned [io  0x3000-0x3fff]
[    0.478491] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.478509] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.478533] pci 0000:00:1c.0:   bridge window [mem 0xf0100000-0xf01fffff]
[    0.478556] pci 0000:00:1c.0:   bridge window [mem 0x40000000-0x401fffff 64bit pref]
[    0.478589] pci 0000:03:00.0: BAR 6: assigned [mem 0xf0520000-0xf053ffff pref]
[    0.478607] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    0.478625] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.478649] pci 0000:00:1c.1:   bridge window [mem 0x40200000-0x405fffff]
[    0.478671] pci 0000:00:1c.1:   bridge window [mem 0xf0500000-0xf05fffff 64bit pref]
[    0.478698] pci 0000:00:1e.0: PCI bridge to [bus 0a-0a]
[    0.478711] pci 0000:00:1e.0:   bridge window [io  disabled]
[    0.478732] pci 0000:00:1e.0:   bridge window [mem disabled]
[    0.478749] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    0.478808]   alloc irq_desc for 16 on node -1
[    0.478822]   alloc kstat_irqs on node -1
[    0.478855] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.478878] pci 0000:00:1c.0: setting latency timer to 64
[    0.478916]   alloc irq_desc for 17 on node -1
[    0.478928]   alloc kstat_irqs on node -1
[    0.478953] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.478975] pci 0000:00:1c.1: setting latency timer to 64
[    0.479006] pci 0000:00:1e.0: setting latency timer to 64
[    0.479029] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.479045] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.479062] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.479080] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[    0.479097] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[    0.479114] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[    0.479132] pci_bus 0000:00: resource 10 [mem 0x40000000-0xfebfffff]
[    0.479149] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.479166] pci_bus 0000:02: resource 1 [mem 0xf0100000-0xf01fffff]
[    0.479184] pci_bus 0000:02: resource 2 [mem 0x40000000-0x401fffff 64bit pref]
[    0.479202] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.479219] pci_bus 0000:03: resource 1 [mem 0x40200000-0x405fffff]
[    0.479237] pci_bus 0000:03: resource 2 [mem 0xf0500000-0xf05fffff 64bit pref]
[    0.479256] pci_bus 0000:0a: resource 4 [io  0x0000-0x0cf7]
[    0.479272] pci_bus 0000:0a: resource 5 [io  0x0d00-0xffff]
[    0.479289] pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff]
[    0.479306] pci_bus 0000:0a: resource 7 [mem 0x000d0000-0x000d3fff]
[    0.479323] pci_bus 0000:0a: resource 8 [mem 0x000d4000-0x000d7fff]
[    0.479340] pci_bus 0000:0a: resource 9 [mem 0x000d8000-0x000dbfff]
[    0.479358] pci_bus 0000:0a: resource 10 [mem 0x40000000-0xfebfffff]
[    0.479621] NET: Registered protocol family 2
[    0.479989] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.481648] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.483940] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.485162] TCP: Hash tables configured (established 131072 bind 65536)
[    0.485180] TCP reno registered
[    0.485209] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.485258] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.485742] NET: Registered protocol family 1
[    0.485825] pci 0000:00:02.0: Boot video device
[    0.486138] PCI: CLS 64 bytes, default 64
[    0.486267] Simple Boot Flag at 0x36 set to 0x1
[    0.487438] cpufreq-nforce2: No nForce2 chipset.
[    0.487708] Scanning for low memory corruption every 60 seconds
[    0.488380] audit: initializing netlink socket (disabled)
[    0.488431] type=2000 audit(1290545745.484:1): initialized
[    0.536670] highmem bounce pool size: 64 pages
[    0.536704] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.547992] VFS: Disk quotas dquot_6.5.2
[    0.548401] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.552702] fuse init (API version 7.14)
[    0.553359] msgmni has been set to 1715
[    0.555615] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.555636] io scheduler noop registered
[    0.555649] io scheduler deadline registered
[    0.555763] io scheduler cfq registered (default)
[    0.556389] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.556490]   alloc irq_desc for 40 on node -1
[    0.556504]   alloc kstat_irqs on node -1
[    0.556542] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.556992] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.557087]   alloc irq_desc for 41 on node -1
[    0.557100]   alloc kstat_irqs on node -1
[    0.557132] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    0.557753] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.558220] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.558863] intel_idle: MWAIT substates: 0x20220
[    0.558877] intel_idle: v0.4 model 0x1C
[    0.558888] intel_idle: lapic_timer_reliable_states 0x6
[    0.558923] Marking TSC unstable due to TSC halts in idle states deeper than C2
[    0.559690] Switching to clocksource hpet
[    0.561776] ACPI: AC Adapter [ADP1] (off-line)
[    0.562239] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    0.562279] ACPI: Sleep Button [SLPB]
[    0.562573] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    0.564609] ACPI: Lid Switch [LID0]
[    0.565062] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.565090] ACPI: Power Button [PWRF]
[    0.566311] ACPI: acpi_idle yielding to intel_idle
[    0.599874] thermal LNXTHERM:01: registered as thermal_zone0
[    0.599933] ACPI: Thermal Zone [TZS0] (56 C)
[    0.608830] thermal LNXTHERM:02: registered as thermal_zone1
[    0.608886] ACPI: Thermal Zone [TZS1] (56 C)
[    0.609411] ERST: Table is not found!
[    0.610838] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.621028] brd: module loaded
[    0.625394] loop: module loaded
[    0.626799] ata_piix 0000:00:1f.1: version 2.13
[    0.626854]   alloc irq_desc for 19 on node -1
[    0.626868]   alloc kstat_irqs on node -1
[    0.626899] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.627051] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.627454] isapnp: Scanning for PnP cards...
[    0.638097] scsi0 : ata_piix
[    0.682462] scsi1 : ata_piix
[    0.685057] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[    0.685076] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[    0.687572] Fixed MDIO Bus: probed
[    0.687839] PPP generic driver version 2.4.2
[    0.688129] tun: Universal TUN/TAP device driver, 1.6
[    0.688142] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.688630] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.688719]   alloc irq_desc for 23 on node -1
[    0.688733]   alloc kstat_irqs on node -1
[    0.688764] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.688833] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.688850] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.689133] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.689227] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    0.689260] ehci_hcd 0000:00:1d.7: debug port 1
[    0.693153] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    0.693230] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0444000
[    0.717262] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.717984] hub 1-0:1.0: USB hub found
[    0.718014] hub 1-0:1.0: 8 ports detected
[    0.718412] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.718514] uhci_hcd: USB Universal Host Controller Interface driver
[    0.718657] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.718692] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.718709] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.718934] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.719011] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[    0.719742] hub 2-0:1.0: USB hub found
[    0.719770] hub 2-0:1.0: 2 ports detected
[    0.720059] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.720094] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.720111] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.720333] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.720442] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[    0.721242] hub 3-0:1.0: USB hub found
[    0.721277] hub 3-0:1.0: 2 ports detected
[    0.721595]   alloc irq_desc for 18 on node -1
[    0.721609]   alloc kstat_irqs on node -1
[    0.721640] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.721671] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.721687] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.721951] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.722061] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[    0.722797] hub 4-0:1.0: USB hub found
[    0.722824] hub 4-0:1.0: 2 ports detected
[    0.723122] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    0.723154] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.723171] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.723406] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.723510] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[    0.724249] hub 5-0:1.0: USB hub found
[    0.724276] hub 5-0:1.0: 2 ports detected
[    0.724910] PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.743801] i8042.c: Detected active multiplexing controller, rev 1.1.
[    0.758551] ata2: port disabled. ignoring.
[    0.759427] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.759463] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.759483] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.759502] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.759521] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.760001] mice: PS/2 mouse device common for all mice
[    0.760834] rtc_cmos 00:07: RTC can wake from S4
[    0.761103] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    0.761179] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.761869] device-mapper: uevent: version 1.0.3
[    0.770482] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[    0.818426] device-mapper: multipath: version 1.1.1 loaded
[    0.818445] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.825845] EISA: Probing bus 0 at eisa.0
[    0.825863] EISA: Cannot allocate resource for mainboard
[    0.825881] Cannot allocate resource for EISA slot 1
[    0.825897] Cannot allocate resource for EISA slot 2
[    0.825913] Cannot allocate resource for EISA slot 3
[    0.825929] Cannot allocate resource for EISA slot 4
[    0.825944] Cannot allocate resource for EISA slot 5
[    0.825960] Cannot allocate resource for EISA slot 6
[    0.825975] Cannot allocate resource for EISA slot 7
[    0.825991] Cannot allocate resource for EISA slot 8
[    0.826003] EISA: Detected 0 cards.
[    0.842487] cpuidle: using governor ladder
[    0.843296] cpuidle: using governor menu
[    0.845050] TCP cubic registered
[    0.845946] NET: Registered protocol family 10
[    0.847964] lo: Disabled Privacy Extensions
[    0.849296] NET: Registered protocol family 17
[    0.851939] Using IPI No-Shortcut mode
[    0.852277] PM: Resume from disk failed.
[    0.852306] registered taskstats version 1
[    0.852904]   Magic number: 2:772:953
[    0.853084] rtc_cmos 00:07: setting system clock to 2010-11-23 20:55:46 UTC (1290545746)
[    0.853094] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.853100] EDD information not available.
[    0.890981] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.949970] Freeing initrd memory: 6744k freed
[    0.984130] isapnp: No Plug & Play device found
[    0.984207] Freeing unused kernel memory: 684k freed
[    0.984919] Write protecting the kernel text: 4932k
[    0.985000] Write protecting the kernel read-only data: 1976k
[    1.029146] usb 1-8: new high speed USB device using ehci_hcd and address 2
[    1.031681] udev[83]: starting version 163
[    1.487183] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[    1.487332] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.487859] Linux agpgart interface v0.103
[    1.610657] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[    1.611206] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[    1.614364] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    1.619899] ahci 0000:00:1f.2: version 3.0
[    1.619944] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.620104]   alloc irq_desc for 42 on node -1
[    1.620112]   alloc kstat_irqs on node -1
[    1.620140] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[    1.620295] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
[    1.620308] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[    1.620321] ahci 0000:00:1f.2: setting latency timer to 64
[    1.620872] scsi2 : ahci
[    1.621279] scsi3 : ahci
[    1.621534] scsi4 : ahci
[    1.621778] scsi5 : ahci
[    1.622178] ata3: SATA max UDMA/133 abar m1024@0xf0444400 port 0xf0444500 irq 42
[    1.622186] ata4: DUMMY
[    1.622192] ata5: SATA max UDMA/133 abar m1024@0xf0444400 port 0xf0444600 irq 42
[    1.622198] ata6: DUMMY
[    1.695709] [drm] Initialized drm 1.1.0 20060810
[    1.755053] ACPI: Battery Slot [BAT0] (battery present)
[    2.136147] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.136212] ata5: SATA link down (SStatus 0 SControl 300)
[    2.137269] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    2.187181] ata3.00: ATA-8: WDC WD1600BEVT-22ZCT0, 11.01A11, max UDMA/133
[    2.187206] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.189622] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    2.193326] ata3.00: configured for UDMA/133
[    2.208552] scsi 2:0:0:0: Direct-Access     ATA      WDC WD1600BEVT-2 11.0 PQ: 0 ANSI: 5
[    2.209153] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    2.209281] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    2.209588] sd 2:0:0:0: [sda] Write Protect is off
[    2.209597] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.209668] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.210098]  sda: sda1 sda2 < sda5 sda6 sda7 >
[    3.154794] sd 2:0:0:0: [sda] Attached SCSI disk
[    3.240439] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    3.240450] i915 0000:00:02.0: setting latency timer to 64
[    3.288807] [drm] set up 7M of stolen space
[    3.395997] composite sync not supported
[    3.396153] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.396600] [drm] initialized overlay support
[   31.753502] Skipping EDID probe due to cached edid
[   31.911691] Console: switching to colour frame buffer device 128x37
[   31.918998] fb0: inteldrmfb frame buffer device
[   31.919004] drm: registered panic notifier
[   31.919014] Slow work thread pool: Starting up
[   31.919180] Slow work thread pool: Ready
[   31.919202] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   32.220185] Skipping EDID probe due to cached edid
[   39.466206] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[  148.418678] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[  148.450049] udev[374]: starting version 163
[  148.643912] lp: driver loaded but no devices found
[  148.749543] intel_rng: FWH not detected
[  148.944708] leds_ss4200: no LED devices found
[  149.171326] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[  149.171418] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[  149.171579] r8169 0000:03:00.0: setting latency timer to 64
[  149.171774]   alloc irq_desc for 43 on node -1
[  149.171782]   alloc kstat_irqs on node -1
[  149.171845] r8169 0000:03:00.0: irq 43 for MSI/MSI-X
[  149.229555] r8169 0000:03:00.0: eth0: RTL8102e at 0xf8926000, 00:1f:16:15:de:fa, XID 14a00000 IRQ 43
[  149.416443] Adding 2157564k swap on /dev/sda7.  Priority:-1 extents:1 across:2157564k
[  149.525220] cfg80211: Calling CRDA to update world regulatory domain
[  149.545628] Initializing USB Mass Storage driver...
[  149.626917] scsi6 : usb-storage 1-8:1.0
[  149.637256] usbcore: registered new interface driver usb-storage
[  149.637265] USB Mass Storage support registered.
[  149.674539] acer-wmi: Acer Laptop ACPI-WMI Extras
[  149.710387] cfg80211: World regulatory domain updated:
[  149.710399]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  149.710410]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  149.710420]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  149.710430]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  149.710440]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  149.710450]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  150.085813] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04711/0xa00000/0x0
[  150.151643] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input5
[  150.165535] rt2800pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[  150.165554] rt2800pci 0000:02:00.0: setting latency timer to 64
[  150.226544] type=1400 audit(1290538695.867:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=702 comm="apparmor_parser"
[  150.227443] type=1400 audit(1290538695.867:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=702 comm="apparmor_parser"
[  150.227978] type=1400 audit(1290538695.867:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=702 comm="apparmor_parser"
[  150.435757] r8169 0000:03:00.0: eth0: link down
[  150.436460] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  150.546364] phy0: Selected rate control algorithm 'minstrel'
[  150.549547] Registered led device: rt2800pci-phy0::radio
[  150.549745] Registered led device: rt2800pci-phy0::assoc
[  150.549931] Registered led device: rt2800pci-phy0::quality
[  150.552817] rt2860sta: module is from the staging directory, the quality is unknown, you have been warned.
[  150.643929]   alloc irq_desc for 22 on node -1
[  150.643939]   alloc kstat_irqs on node -1
[  150.643960] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[  150.644314]   alloc irq_desc for 44 on node -1
[  150.644323]   alloc kstat_irqs on node -1
[  150.644350] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[  150.644422] HDA Intel 0000:00:1b.0: setting latency timer to 64
[  150.659822] scsi 6:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
[  150.662377] sd 6:0:0:0: Attached scsi generic sg1 type 0
[  150.680647] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[  150.812427] hda_codec: ALC269: BIOS auto-probing.
[  150.846705] type=1400 audit(1290538696.487:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=924 comm="apparmor_parser"
[  150.847575] type=1400 audit(1290538696.487:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=924 comm="apparmor_parser"
[  150.876660] phy0 -> rt2800pci_mcu_status: Error - MCU request failed, no response from hardware
[  150.885503] type=1400 audit(1290538696.527:7): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=923 comm="apparmor_parser"
[  150.889325] type=1400 audit(1290538696.531:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=924 comm="apparmor_parser"
[  150.923720] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  150.963265] type=1400 audit(1290538696.603:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=944 comm="apparmor_parser"
[  150.964475] type=1400 audit(1290538696.607:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=944 comm="apparmor_parser"
[  150.999375] type=1400 audit(1290538696.639:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=952 comm="apparmor_parser"
[  307.983022] ppdev: user-space parallel port driver
[  308.841398] Skipping EDID probe due to cached edid
[  308.872258] Skipping EDID probe due to cached edid
[  311.431493] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=600
[  312.792261] Skipping EDID probe due to cached edid
[  312.829248] Skipping EDID probe due to cached edid
[  312.864331] Skipping EDID probe due to cached edid
[  312.901280] Skipping EDID probe due to cached edid
[  314.152226] Skipping EDID probe due to cached edid
[  317.045287] Skipping EDID probe due to cached edid
[  318.409004] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=600
[  321.072252] Skipping EDID probe due to cached edid
[  421.736588] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  421.823721] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  430.795532] wlan0: authenticate with 00:23:f8:d3:5a:23 (try 1)
[  430.797269] wlan0: authenticated
[  430.797393] wlan0: associate with 00:23:f8:d3:5a:23 (try 1)
[  430.800024] wlan0: RX AssocResp from 00:23:f8:d3:5a:23 (capab=0x431 status=0 aid=1)
[  430.800035] wlan0: associated
[  430.803969] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  430.804341] cfg80211: Calling CRDA for country: TR
[  430.828738] cfg80211: Received country IE:
[  430.828750] cfg80211: Regulatory domain: TR
[  430.828755]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  430.828765]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (10000 mBi, 2000 mBm)
[  430.828771] cfg80211: CRDA thinks this should applied:
[  430.828777] cfg80211: Regulatory domain: TR
[  430.828782]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  430.828791]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  430.828800]     (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[  430.828809]     (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[  430.828815] cfg80211: We intersect both of these and get:
[  430.828821] cfg80211: Regulatory domain: 98
[  430.828826]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  430.828835]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  430.828853] cfg80211: Disabling channel 2484 MHz on phy0 due to Country IE
[  430.828864] cfg80211: Current regulatory domain updated by AP to: TR
[  430.828870]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  430.828879]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  441.482905] wlan0: no IPv6 routers present
[  595.693230] wlan0: deauthenticated from 00:23:f8:d3:5a:23 (Reason: 6)
[  595.717418] cfg80211: All devices are disconnected, going to restore regulatory settings
[  595.717442] cfg80211: Restoring regulatory settings
[  595.717461] cfg80211: Calling CRDA to update world regulatory domain
[  595.735364] cfg80211: World regulatory domain updated:
[  595.735379]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  595.735396]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  595.735410]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  595.735423]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  595.735436]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  595.735450]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  597.279151] wlan0: authenticate with 00:23:f8:d3:5a:23 (try 1)
[  597.280606] wlan0: authenticated
[  597.280692] wlan0: associate with 00:23:f8:d3:5a:23 (try 1)
[  597.283547] wlan0: RX AssocResp from 00:23:f8:d3:5a:23 (capab=0x431 status=0 aid=1)
[  597.283562] wlan0: associated
[  597.288352] cfg80211: Calling CRDA for country: TR
[  597.305192] cfg80211: Received country IE:
[  597.305208] cfg80211: Regulatory domain: TR
[  597.305216]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  597.305231]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (10000 mBi, 2000 mBm)
[  597.305241] cfg80211: CRDA thinks this should applied:
[  597.305249] cfg80211: Regulatory domain: TR
[  597.305257]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  597.305270]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  597.305282]     (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[  597.305295]     (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[  597.305304] cfg80211: We intersect both of these and get:
[  597.305313] cfg80211: Regulatory domain: 98
[  597.305320]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  597.305333]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  597.305354] cfg80211: Disabling channel 2484 MHz on phy0 due to Country IE
[  597.305370] cfg80211: Current regulatory domain updated by AP to: TR
[  597.305379]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  597.305392]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)


Kod Seç Genişlet

turgut@ubunturgut:~$ dmesg | tail
[  597.305282]     (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[  597.305295]     (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[  597.305304] cfg80211: We intersect both of these and get:
[  597.305313] cfg80211: Regulatory domain: 98
[  597.305320]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  597.305333]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[  597.305354] cfg80211: Disabling channel 2484 MHz on phy0 due to Country IE
[  597.305370] cfg80211: Current regulatory domain updated by AP to: TR
[  597.305379]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  597.305392]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
turgut@ubunturgut:~$

[bytan]

[   39.466206] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[  148.418678] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro

İki satır ne kadar beklediğini gösteriyor. Çeşitli böceklerde geçiyor benzer satırlar ama işe yarar bir şey bulamadım. Güncelleme geldikçe sektirmeden almaya çalış.

[kiltan]

[   39.466206] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[  148.418678] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro

İki satır ne kadar beklediğini gösteriyor. Çeşitli böceklerde geçiyor benzer satırlar ama işe yarar bir şey bulamadım. Güncelleme geldikçe sektirmeden almaya çalış.

bu böcekler konusunda en ufak bir bilgim yok bu nasıl düzeltilebilir ve sebep tam olarak nedir acaba ve sistem güncellemeyle mi düzelebilir, açıklayabilir misiniz?

[bytan]

Nasıl düzeltilebileceğine dair bir bilgiyi ben bulamadım. Şu an sadece gelen güncellemeleri önerebiliyorum.

[kiltan]

ilginiz için çok teşekkür ederim , sanırım ben pek şanslı değilim ubuntu konusunda, umarım güncellemelerle bu durum düzelir, sık sık sistem güncelleyeceğim.