Grub Loading Sonrasi Yavas Boot

[thycpt737]

Hekese Merhaba,

Araniza Yeni katildim ve bu güzel forum ve paylasimlari için herkese cok tesekkur ederim. Ubuntu 9.10 Fujitsu Amilo Pi1505 Laptopuma Sorunsuz bire sekilde kurdum ve cok memnunum.Butun Hdd yi ubuntu icin kullaniorum herhangi baska bir partition mevcut degil. Benim sorunum ise Grub loading yazisindan sonra pcnin herhangi bir islem yapmadan 42 sn kadar siyah bir ekranda kalmasi, bu esnada sol ust kosede yanip sonen bir imlec harici herhangi birsey olmamasi.Bundan sonra ise ubuntu startup ekrani aciliyor ve normal bir sekilde ubuntu aciliyor. Asagida "dmesg" ciktisini veriyorum.:Yardimci olabilirseniz cok sevinirim. Tesekkurler.

Kod Seç Genişlet

[    0.190501] pci 0000:05:00.0: BAR 0: no parent found for of device [0xb0200000-0xb0200fff]
[    0.190501] pci 0000:05:00.0: BAR 0: can't allocate resource
[    0.200008] Bluetooth: Core ver 2.15
[    0.200024] NET: Registered protocol family 31
[    0.200024] Bluetooth: HCI device and connection manager initialized
[    0.200024] Bluetooth: HCI socket layer initialized
[    0.200024] NetLabel: Initializing
[    0.200024] NetLabel:  domain hash size = 128
[    0.200024] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.200038] NetLabel:  unlabeled traffic allowed by default
[    0.200071] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.200077] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.216010] pnp: PnP ACPI init
[    0.216021] ACPI: bus type pnp registered
[    0.218117] pnp: PnP ACPI: found 11 devices
[    0.218120] ACPI: ACPI bus type pnp unregistered
[    0.218124] PnPBIOS: Disabled by ACPI PNP
[    0.218135] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[    0.218139] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[    0.218142] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[    0.218148] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[    0.218151] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.218155] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[    0.218158] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
[    0.218161] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
[    0.218169] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
[    0.218176] system 00:06: ioport range 0x200-0x20f has been reserved
[    0.218179] system 00:06: ioport range 0x680-0x69f has been reserved
[    0.218182] system 00:06: ioport range 0x800-0x80f has been reserved
[    0.218185] system 00:06: ioport range 0x1000-0x107f has been reserved
[    0.218188] system 00:06: ioport range 0x1180-0x11bf has been reserved
[    0.218191] system 00:06: ioport range 0x1640-0x164f has been reserved
[    0.218197] system 00:07: ioport range 0x6a0-0x6af has been reserved
[    0.218201] system 00:07: ioport range 0x6b0-0x6ff has been reserved
[    0.252882] AppArmor: AppArmor Filesystem Enabled
[    0.252945] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[    0.252950] pci 0000:00:1c.0:   IO window: 0xf000-0xffff
[    0.252957] pci 0000:00:1c.0:   MEM window: 0xfac00000-0xfebfffff
[    0.252963] pci 0000:00:1c.0:   PREFETCH window: disabled
[    0.252968] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04
[    0.252970] pci 0000:00:1c.1:   IO window: disabled
[    0.252977] pci 0000:00:1c.1:   MEM window: disabled
[    0.252982] pci 0000:00:1c.1:   PREFETCH window: disabled
[    0.253000] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:05
[    0.253002] pci 0000:00:1c.2:   IO window: disabled
[    0.253009] pci 0000:00:1c.2:   MEM window: 0xf7000000-0xf70fffff
[    0.253014] pci 0000:00:1c.2:   PREFETCH window: disabled
[    0.253024] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
[    0.253028] pci 0000:00:1e.0:   IO window: 0x2000-0x2fff
[    0.253035] pci 0000:00:1e.0:   MEM window: 0xf0200000-0xf02fffff
[    0.253040] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.253052] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[    0.253059]   alloc irq_desc for 17 on node -1
[    0.253062]   alloc kstat_irqs on node -1
[    0.253067] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.253075] pci 0000:00:1c.0: setting latency timer to 64
[    0.253084]   alloc irq_desc for 16 on node -1
[    0.253086]   alloc kstat_irqs on node -1
[    0.253090] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.253097] pci 0000:00:1c.1: setting latency timer to 64
[    0.253105] pci 0000:00:1c.2: enabling device (0000 -> 0002)
[    0.253109]   alloc irq_desc for 18 on node -1
[    0.253111]   alloc kstat_irqs on node -1
[    0.253115] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.253122] pci 0000:00:1c.2: setting latency timer to 64
[    0.253131] pci 0000:00:1e.0: setting latency timer to 64
[    0.253136] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.253139] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.253142] pci_bus 0000:02: resource 0 io:  [0xf000-0xffff]
[    0.253144] pci_bus 0000:02: resource 1 mem: [0xfac00000-0xfebfffff]
[    0.253147] pci_bus 0000:05: resource 1 mem: [0xf7000000-0xf70fffff]
[    0.253150] pci_bus 0000:06: resource 0 io:  [0x2000-0x2fff]
[    0.253153] pci_bus 0000:06: resource 1 mem: [0xf0200000-0xf02fffff]
[    0.253155] pci_bus 0000:06: resource 3 io:  [0x00-0xffff]
[    0.253158] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffff]
[    0.253193] NET: Registered protocol family 2
[    0.253295] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.253641] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.254190] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.254453] TCP: Hash tables configured (established 131072 bind 65536)
[    0.254456] TCP reno registered
[    0.254536] NET: Registered protocol family 1
[    0.254604] Trying to unpack rootfs image as initramfs...
[    0.460094] Freeing initrd memory: 7466k freed
[    0.464506] Simple Boot Flag at 0x35 set to 0x1
[    0.464715] cpufreq-nforce2: No nForce2 chipset.
[    0.464746] Scanning for low memory corruption every 60 seconds
[    0.464865] audit: initializing netlink socket (disabled)
[    0.464886] type=2000 audit(1261356059.463:1): initialized
[    0.474291] highmem bounce pool size: 64 pages
[    0.474297] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.475935] VFS: Disk quotas dquot_6.5.2
[    0.476010] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.476617] fuse init (API version 7.12)
[    0.476709] msgmni has been set to 1706
[    0.476959] alg: No test for stdrng (krng)
[    0.476975] io scheduler noop registered
[    0.476977] io scheduler anticipatory registered
[    0.476980] io scheduler deadline registered
[    0.477027] io scheduler cfq registered (default)
[    0.477041] pci 0000:00:02.0: Boot video device
[    0.477308]   alloc irq_desc for 24 on node -1
[    0.477311]   alloc kstat_irqs on node -1
[    0.477324] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[    0.477337] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    0.477503]   alloc irq_desc for 25 on node -1
[    0.477505]   alloc kstat_irqs on node -1
[    0.477515] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
[    0.477526] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[    0.477691]   alloc irq_desc for 26 on node -1
[    0.477693]   alloc kstat_irqs on node -1
[    0.477702] pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
[    0.477714] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[    0.477833] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.477955] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.478388] ACPI: AC Adapter [AC0] (on-line)
[    0.478480] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.478484] ACPI: Power Button [PWRF]
[    0.478546] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    0.478584] ACPI: Lid Switch [LID0]
[    0.478631] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[    0.478634] ACPI: Power Button [PWRB]
[    0.478682] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[    0.478685] ACPI: Sleep Button [SLPB]
[    0.479408] ACPI: SSDT 7f697f42 001A8 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
[    0.479800] ACPI: SSDT 7f697cf7 001C6 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
[    0.480141] Marking TSC unstable due to TSC halts in idle
[    0.480174] Switched to high resolution mode on CPU 0
[    0.480186] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    0.480214] processor LNXCPU:00: registered as cooling_device0
[    0.480218] ACPI: Processor [CPU0] (supports 8 throttling states)
[    0.480601] ACPI: SSDT 7f6980ea 00089 (v01  PmRef  Cpu1Ist 00003000 INTL 20050624)
[    0.480935] ACPI: SSDT 7f697ebd 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20050624)
[    0.481343] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[    0.481370] processor LNXCPU:01: registered as cooling_device1
[    0.481375] ACPI: Processor [CPU1] (supports 8 throttling states)
[    0.481703] Switched to high resolution mode on CPU 1
[    0.483741] thermal LNXTHERM:01: registered as thermal_zone0
[    0.483750] ACPI: Thermal Zone [THRM] (68 C)
[    0.483819] isapnp: Scanning for PnP cards...
[    0.576833] ACPI: Battery Slot [BAT0] (battery absent)
[    0.837848] isapnp: No Plug & Play device found
[    0.839129] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.840600] brd: module loaded
[    0.841105] loop: module loaded
[    0.841181] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[    0.841262] ahci 0000:00:1f.2: version 3.0
[    0.841276]   alloc irq_desc for 19 on node -1
[    0.841278]   alloc kstat_irqs on node -1
[    0.841285] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.841319]   alloc irq_desc for 27 on node -1
[    0.841321]   alloc kstat_irqs on node -1
[    0.841331] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
[    0.841410] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
[    0.841414] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[    0.841419] ahci 0000:00:1f.2: setting latency timer to 64
[    0.841604] scsi0 : ahci
[    0.841706] scsi1 : ahci
[    0.841773] scsi2 : ahci
[    0.841836] scsi3 : ahci
[    0.841945] ata1: SATA max UDMA/133 abar m1024@0xf0004400 port 0xf0004500 irq 27
[    0.841947] ata2: DUMMY
[    0.841950] ata3: SATA max UDMA/133 abar m1024@0xf0004400 port 0xf0004600 irq 27
[    0.841953] ata4: DUMMY
[    0.842008] ata_piix 0000:00:1f.1: version 2.13
[    0.842017] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.842057] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.842137] scsi4 : ata_piix
[    0.842207] scsi5 : ata_piix
[    0.842771] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[    0.842774] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[    0.843759] Fixed MDIO Bus: probed
[    0.843796] PPP generic driver version 2.4.2
[    0.843892] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.843914]   alloc irq_desc for 23 on node -1
[    0.843916]   alloc kstat_irqs on node -1
[    0.843921] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.843933] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.843937] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.843989] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.847918] ehci_hcd 0000:00:1d.7: debug port 1
[    0.847925] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.847940] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0004000
[    0.852111] ata6: port disabled. ignoring.
[    0.861015] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.861092] usb usb1: configuration #1 chosen from 1 choice
[    0.861124] hub 1-0:1.0: USB hub found
[    0.861133] hub 1-0:1.0: 8 ports detected
[    0.861212] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.861230] uhci_hcd: USB Universal Host Controller Interface driver
[    0.861255] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.861262] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.861266] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.861298] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.861328] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[    0.861413] usb usb2: configuration #1 chosen from 1 choice
[    0.861443] hub 2-0:1.0: USB hub found
[    0.861452] hub 2-0:1.0: 2 ports detected
[    0.861505] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.861512] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.861516] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.861554] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.861589] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[    0.861670] usb usb3: configuration #1 chosen from 1 choice
[    0.861701] hub 3-0:1.0: USB hub found
[    0.861708] hub 3-0:1.0: 2 ports detected
[    0.861757] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.861764] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.861768] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.861799] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.861835] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[    0.861921] usb usb4: configuration #1 chosen from 1 choice
[    0.861949] hub 4-0:1.0: USB hub found
[    0.861956] hub 4-0:1.0: 2 ports detected
[    0.862004] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    0.862011] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.862015] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.862046] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.862082] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[    0.862168] usb usb5: configuration #1 chosen from 1 choice
[    0.862196] hub 5-0:1.0: USB hub found
[    0.862203] hub 5-0:1.0: 2 ports detected
[    0.862315] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.864447] i8042.c: Detected active multiplexing controller, rev 1.1.
[    0.865615] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.865621] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.865624] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.865628] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.865631] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.865708] mice: PS/2 mouse device common for all mice
[    0.865910] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[    0.865943] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.866048] device-mapper: uevent: version 1.0.3
[    0.866148] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.866259] device-mapper: multipath: version 1.1.0 loaded
[    0.866262] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.866392] EISA: Probing bus 0 at eisa.0
[    0.866399] Cannot allocate resource for EISA slot 1
[    0.866401] Cannot allocate resource for EISA slot 2
[    0.866429] EISA: Detected 0 cards.
[    0.866636] cpuidle: using governor ladder
[    0.866771] cpuidle: using governor menu
[    0.867300] TCP cubic registered
[    0.867466] NET: Registered protocol family 10
[    0.867964] lo: Disabled Privacy Extensions
[    0.868355] NET: Registered protocol family 17
[    0.868374] Bluetooth: L2CAP ver 2.13
[    0.868376] Bluetooth: L2CAP socket layer initialized
[    0.868379] Bluetooth: SCO (Voice Link) ver 0.6
[    0.868381] Bluetooth: SCO socket layer initialized
[    0.868430] Bluetooth: RFCOMM TTY layer initialized
[    0.868433] Bluetooth: RFCOMM socket layer initialized
[    0.868435] Bluetooth: RFCOMM ver 1.11
[    0.868744] Using IPI No-Shortcut mode
[    0.868806] PM: Resume from disk failed.
[    0.868820] registered taskstats version 1
[    0.868941]   Magic number: 5:743:658
[    0.868954] block ram11: hash matches
[    0.869039] rtc_cmos 00:08: setting system clock to 2009-12-21 00:41:00 UTC (1261356060)
[    0.869043] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.869045] EDD information not available.
[    0.897453] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[    1.000116] Clocksource tsc unstable (delta = -99755349 ns)
[    1.016492] ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-T10N, PR03, max UDMA/33
[    1.032446] ata5.00: configured for UDMA/33
[    1.160115] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.161178] ata1.00: ACPI cmd ef/90:03:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
[    1.168053] ata3: SATA link down (SStatus 0 SControl 300)
[    1.188614] ata1.00: ATA-7: WDC WD1200BEVS-07LAT0, 01.06M01, max UDMA/133
[    1.188617] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 1)
[    1.189755] ata1.00: ACPI cmd ef/90:03:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
[    1.189929] ata1.00: configured for UDMA/133
[    1.204307] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1200BEVS-0 01.0 PQ: 0 ANSI: 5
[    1.204503] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.204545] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    1.204595] sd 0:0:0:0: [sda] Write Protect is off
[    1.204598] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.204624] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.204758]  sda: sda1 sda2 < sda5 >
[    1.239420] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.412052] usb 2-1: new low speed USB device using uhci_hcd and address 2
[    1.611443] usb 2-1: configuration #1 chosen from 1 choice
[    1.856046] usb 2-2: new low speed USB device using uhci_hcd and address 3
[    2.037437] usb 2-2: configuration #1 chosen from 1 choice
[   21.189383] scsi scan: 96 byte inquiry failed.  Consider BLIST_INQUIRY_36 for this device
[   21.191859] scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T10N  PR03 PQ: 0 ANSI: 5
[   41.184152] sr0: scsi-1 drive
[   41.184157] Uniform CD-ROM driver Revision: 3.20
[   41.184292] sr 4:0:0:0: Attached scsi CD-ROM sr0
[   41.184367] sr 4:0:0:0: Attached scsi generic sg1 type 5
[   41.184423] Freeing unused kernel memory: 540k freed
[   41.184803] Write protecting the kernel text: 4568k
[   41.184862] Write protecting the kernel read-only data: 1836k
[   41.339141] Linux agpgart interface v0.103
[   41.352250] acpi device:0a: registered as cooling_device2
[   41.352374] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:07/input/input6
[   41.352417] ACPI: Video Device [IGD] (multi-head: yes  rom: no  post: no)
[   41.392327] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[   41.392952] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[   41.395912] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[   41.421368] [drm] Initialized drm 1.1.0 20060810
[   41.449288] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   41.449295] i915 0000:00:02.0: setting latency timer to 64
[   41.455082] <6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[   41.455110] 8139cp 0000:06:05.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[   41.457711] 8139too Fast Ethernet driver 0.9.28
[   41.457745] 8139too 0000:06:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   41.459188] eth0: RealTek RTL8139 at 0x2000, 00:03:0d:4f:ea:b1, IRQ 16
[   41.570808] usbcore: registered new interface driver hiddev
[   41.573770] ohci1394 0000:06:04.0: enabling device (0195 -> 0197)
[   41.573780] ohci1394 0000:06:04.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   41.609602] input: HID 04d9:0499 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input7
[   41.609690] generic-usb 0003:04D9:0499.0001: input,hidraw0: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:1d.0-1/input0
[   41.623649] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input8
[   41.623713] generic-usb 0003:045E:00DD.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.0-2/input0
[   41.647529] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input9
[   41.647600] generic-usb 0003:045E:00DD.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.0-2/input1
[   41.647619] usbcore: registered new interface driver usbhid
[   41.647623] usbhid: v2.6:USB HID core driver
[   41.691167] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18]  MMIO=[f0200000-f02007ff]  Max Packet=[2048]  IR/IT contexts=[8/8]
[   41.989135] [drm] TV-14: set mode NTSC 480i 0
[   42.114784] [drm] fb0: inteldrmfb frame buffer device
[   42.114794] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   42.185177] [drm] LVDS-8: set mode 1280x800 17
[   42.390453] Console: switching to colour frame buffer device 160x50
[   42.964171] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00030d005003a224]
[   48.816057] ata5: lost interrupt (Status 0x58)
[   48.820025] ata5: drained 32768 bytes to clear DRQ.
[   48.926633] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[   48.926644] ata5.00: cmd a0/01:00:00:fe:00/00:00:00:00:00/a0 tag 0 dma 16640 in
[   48.926645]          cdb 12 00 00 00 fe 00 00 00  00 00 00 00 00 00 00 00
[   48.926646]          res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[   48.926649] ata5.00: status: { DRDY }
[   48.926686] ata5: soft resetting link
[   49.108439] ata5.00: configured for UDMA/33
[   49.110792] ata5: EH complete
[   49.382975] PM: Starting manual resume from disk
[   49.382979] PM: Resume from partition 8:5
[   49.382982] PM: Checking hibernation image.
[   49.383104] PM: Resume from disk failed.
[   49.444208] EXT4-fs (sda1): barriers enabled
[   49.467477] kjournald2 starting: pid 429, dev sda1:8, commit interval 5 seconds
[   49.467497] EXT4-fs (sda1): delayed allocation enabled
[   49.467501] EXT4-fs: file extents enabled
[   49.475235] EXT4-fs: mballoc enabled
[   49.475251] EXT4-fs (sda1): mounted filesystem with ordered data mode
[   50.287207] type=1505 audit(1261356109.914:2): operation="profile_load" pid=452 name=/usr/share/gdm/guest-session/Xsession
[   50.290090] type=1505 audit(1261356109.918:3): operation="profile_load" pid=453 name=/sbin/dhclient3
[   50.290890] type=1505 audit(1261356109.918:4): operation="profile_load" pid=453 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[   50.291326] type=1505 audit(1261356109.918:5): operation="profile_load" pid=453 name=/usr/lib/connman/scripts/dhclient-script
[   50.349577] type=1505 audit(1261356109.979:6): operation="profile_load" pid=454 name=/usr/bin/evince
[   50.362580] type=1505 audit(1261356109.990:7): operation="profile_load" pid=454 name=/usr/bin/evince-previewer
[   50.370152] type=1505 audit(1261356109.998:8): operation="profile_load" pid=454 name=/usr/bin/evince-thumbnailer
[   50.412527] type=1505 audit(1261356110.042:9): operation="profile_load" pid=456 name=/usr/lib/cups/backend/cups-pdf
[   50.413463] type=1505 audit(1261356110.042:10): operation="profile_load" pid=456 name=/usr/sbin/cupsd
[   50.429534] type=1505 audit(1261356110.058:11): operation="profile_load" pid=457 name=/usr/sbin/tcpdump
[   66.750250] EXT4-fs (sda1): internal journal on sda1:8
[   66.772704] udev: starting version 147
[   66.799985] lp: driver loaded but no devices found
[   66.820134] intel_rng: FWH not detected
[   66.980024] sdhci: Secure Digital Host Controller Interface driver
[   66.980030] sdhci: Copyright(c) Pierre Ossman
[   66.981455] sdhci-pci 0000:06:04.2: SDHCI controller found [1217:7120] (rev 1)
[   66.981478] sdhci-pci 0000:06:04.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   66.981508] mmc0: Unknown controller version (16). You may experience problems.
[   66.981548] Registered led device: mmc0::
[   66.981588] mmc0: SDHCI controller on PCI [0000:06:04.2] using PIO
[   67.023477] Adding 4803392k swap on /dev/sda5.  Priority:-1 extents:1 across:4803392k
[   67.042055] cfg80211: Calling CRDA to update world regulatory domain
[   67.105351] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
[   67.105355] iwl3945: Copyright(c) 2003-2009 Intel Corporation
[   67.105478] iwl3945 0000:05:00.0: enabling device (0000 -> 0002)
[   67.105491] iwl3945 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   67.105511] iwl3945 0000:05:00.0: setting latency timer to 64
[   67.113267] ip_tables: (C) 2000-2006 Netfilter Core Team
[   67.126847] cfg80211: World regulatory domain updated:
[   67.126851] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   67.126854] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   67.126857] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   67.126860] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   67.126863] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   67.126866] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   67.196595]   alloc irq_desc for 22 on node -1
[   67.196599]   alloc kstat_irqs on node -1
[   67.196606] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   67.196662] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   67.240558] iwl3945 0000:05:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[   67.240563] iwl3945 0000:05:00.0: Detected Intel Wireless WiFi Link 3945ABG
[   67.240690]   alloc irq_desc for 28 on node -1
[   67.240693]   alloc kstat_irqs on node -1
[   67.240727] iwl3945 0000:05:00.0: irq 28 for MSI/MSI-X
[   67.290975] psmouse serio4: ID: 10 00 64
[   67.306998] phy0: Selected rate control algorithm 'iwl-3945-rs'
[   67.345941] hda_codec: Unknown model for ALC861, trying auto-probe from BIOS...
[   67.346034] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[   67.349560] type=1505 audit(1261356126.979:12): operation="profile_replace" pid=985 name=/usr/share/gdm/guest-session/Xsession
[   67.354455] type=1505 audit(1261356126.983:13): operation="profile_replace" pid=988 name=/sbin/dhclient3
[   67.355274] type=1505 audit(1261356126.983:14): operation="profile_replace" pid=988 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[   67.355718] type=1505 audit(1261356126.983:15): operation="profile_replace" pid=988 name=/usr/lib/connman/scripts/dhclient-script
[   67.360185] type=1505 audit(1261356126.987:16): operation="profile_replace" pid=989 name=/usr/bin/evince
[   67.374073] type=1505 audit(1261356127.003:17): operation="profile_replace" pid=989 name=/usr/bin/evince-previewer
[   67.403761] type=1505 audit(1261356127.031:18): operation="profile_replace" pid=989 name=/usr/bin/evince-thumbnailer
[   67.419798] type=1505 audit(1261356127.047:19): operation="profile_replace" pid=1013 name=/usr/lib/cups/backend/cups-pdf
[   67.420742] type=1505 audit(1261356127.047:20): operation="profile_replace" pid=1013 name=/usr/sbin/cupsd
[   67.423692] type=1505 audit(1261356127.051:21): operation="profile_replace" pid=1014 name=/usr/sbin/tcpdump
[   67.604841] iwl3945 0000:05:00.0: firmware: requesting iwlwifi-3945-2.ucode
[   67.933349] input: PS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio4/input/input11
[   68.059422] [drm] TV-14: set mode NTSC 480i 0
[   68.199631] [drm] TV-14: set mode NTSC 480i 0
[   68.330237] iwl3945 0000:05:00.0: loaded firmware version 15.32.2.9
[   68.330400] iwl3945 0000:05:00.0: Radio disabled by HW RF Kill switch
[   68.332169] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[   68.504638] [drm] TV-14: set mode NTSC 480i 0
[   68.628019] iwl3945 0000:05:00.0: Radio disabled by HW RF Kill switch
[   68.658603] ppdev: user-space parallel port driver
[   68.721480] [drm] TV-14: set mode NTSC 480i 0
[   70.861930] [drm] TV-14: set mode NTSC 480i 0
[   71.017017] [drm] TV-14: set mode NTSC 480i 0
[   71.305495] [drm] TV-14: set mode NTSC 480i 0
[   71.447199] [drm] TV-14: set mode NTSC 480i 0
[   71.724389] [drm] TV-14: set mode NTSC 480i 0
[   71.865648] [drm] TV-14: set mode NTSC 480i 0
[   72.874888] [drm] TV-14: set mode NTSC 480i 0
[   73.015620] [drm] TV-14: set mode NTSC 480i 0
[   74.805039] ata5: lost interrupt (Status 0x58)
[   74.823834] ata5: drained 32768 bytes to clear DRQ.
[   74.917860] ata5.00: limiting speed to UDMA/25:PIO4
[   74.917865] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[   74.917878] ata5.00: cmd a0/01:00:00:fe:00/00:00:00:00:00/a0 tag 0 dma 16640 in
[   74.917879]          cdb 12 00 00 00 fe 00 00 00  00 00 00 00 00 00 00 00
[   74.917880]          res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[   74.917884] ata5.00: status: { DRDY }
[   74.917924] ata5: soft resetting link
[   75.224325] ata5.00: configured for UDMA/25
[   75.232261] ata5: EH complete
[   78.708017] eth0: no IPv6 routers present


Düzenleme notu : Uzun çıktılar ve kodlar için; mesaj düzenleme bölümünde ( # ) işaretli kod ekle kısmını kullanabilirsiniz.

[zeitgeist]

Bilgisayar açılırken ctrl+alt+f4 yaptığında açılış süreci text döküman olarak karşına çıkacaktır. O aşamada göze çarpan bir şeyler var mı?

[thycpt737]

Yaklasik 10 kere soylediginizi denedim.Hem bios ekraninda hem grub loading yazisi ciktiginda fakat herhangi bi yazili metin cikartmayi basaramadim. Ayni sekilde açilmaya devam etti. Sadece Ubuntu 9.10 kurulu olmasina ragmen zaman kazanmak icin  startup manageri kurup boot timeout suresini 0 yapmistim.Acaba neden bu olabilir mi ? Yoksa baska bir komut dizini ile boot logu gorme imkani mevcut mudur? Tesekkurler.

[zeitgeist]

İlk mesajından anladığım kadarıyla kurulum yaptığın ilk günden beri bu sorunu yaşıyorsun. Eğer sorunun başlama süreci Startup Manager'da yaptığın değişiklikten sonraya denk geliyorsa neden bu da olabilir.

Ubuntuforums da biraz bakındım, yavaş açılış süresiyle ilgili olarak farklı unsurlara değinilmiş. Sorunu çözmek adına üzerinde en çok durulan network ayarları, ardından grub menüde yapılabilecek değişiklikler geliyor; grub açılış parametrelerinden splashı kaldırmak ya da quiet girdisini silmek gibi.

[bytan]

Dmesg çıktısını tail ile birlikte verirsen incelemesi daha kolay olur. Bu haliyle tüm satırlara bakmak zor oluyor.

Makinan kabaca 80 sn'de açılıyor. Gözüme çarpan  birkaç satırda, şayet çıktı da kopukluk yoksa, zaman kaybı olmuş:

Kod Seç Genişlet

[    2.037437] usb 2-2: configuration #1 chosen from 1 choice
[   21.189383] scsi scan: 96 byte inquiry failed.  Consider BLIST_INQUIRY_36 for this device
[   21.191859] scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T10N  PR03 PQ: 0 ANSI: 5
[   41.184152] sr0: scsi-1 drive

Deneme amacıyla usb'de takılı aygıtlarını varsa çıkartabilirsin ve çıktıda geçen diğer aygıtı da çıkartabilirsin.

[thycpt737]

Usb de herhangi birsey takili degil, mouse dışında. Laptop kullandığım için Cdrom drive sökme imkanim da yok, söksemde takamam zaten. Tail ile tam olarak ne demek istediginizi anlamadim..Linux benim için çok yeni bir dünya. Google da baktiktan sonra bunu çıkartabildim umarim bu istediğiniz komut çiktisidir.

thycpt737@FujitsuSiemens:~$ dmesg | tail -f
[   74.916991] ata5.00: limiting speed to UDMA/25:PIO4
[   74.916997] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[   74.917009] ata5.00: cmd a0/01:00:00:fe:00/00:00:00:00:00/a0 tag 0 dma 16640 in
[   74.917010]          cdb 12 00 00 00 fe 00 00 00  00 00 00 00 00 00 00 00
[   74.917012]          res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[   74.917015] ata5.00: status: { DRDY }
[   74.917054] ata5: soft resetting link
[   75.244342] ata5.00: configured for UDMA/25
[   75.248321] ata5: EH complete
[   77.832022] eth0: no IPv6 routers present

Bunun haricinde elimde birde bootchart grafik çıktısı mevcut fakat resmi eklenti yapip yollamaya çalıstığımda mesaj gitmiyor. Bootchart çıktısını mailinize de atabilirim.

[bytan]

Laptop'sa sökmek uygun olmaz sanki. Bu durumda ne yapılabilir bilemiyorum. Biraz google'da bakınmak lazım.

Grafik çıktını resim paylaşım sitelerinin birine yükleyip linki buraya verebilirsin.

[thycpt737]

http://i48.tinypic.com/2eyfhvd.png

Bootchart çıktısını buraya upload ettim.Nedense ilk 40sn pc uyuyor gibi.?

[heartsmagic]

Grub menüsü geldiğinde açılışı yaptın kernel satırının üzerindeyken e tuşuna basıp, ilgili kernel satırının sonundaki quiet kısmını silip sistemi açmayı dener misin? Bir ihtimal ayrıntılı bir açılış elde eder durumu gözlemleriz.

Bir de internet bağlantını nasıl yapıyorsun? İmkânın varsa makineyi herhangi bir ağ olayından "izole" şekilde açmayı dener misin?

[thycpt737]

Aynen dediklerinizi az önce yaptim, e ile başladıktan sonra quiet splash'i sildim ve ctrl x ile boot a devam ettim.Herhangi bir değişiklik olmadi.Su an kablo ile internete bağlaniyorum.Birde bağlantiyi keserek denedim. Oda herhangi bir değişiklik göstermedi.
Ben Grub2 yi setup esnasinda mbr yazdirmistim.Acaba hdd ye mi yazdirmak gerekiyordu? Hdd tek partition ve sadece ubuntu var. Fdisk çıktısı şu sekilde,

root@FujitsuSiemens:~# fdisk -l

Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xeae0eae0

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1       13995   112414806   83  Linux
/dev/sda2           13996       14593     4803435    5  Extended
/dev/sda5           13996       14593     4803403+  82  Linux swap / Solaris

Birde baska bir forumda benzer bir konudan bahsediyor fakat benim problemim bu mu açıkçası tam anlamadim.Çözümde gene mevcut , denedim fakat bir değişiklik olmadı.Teşekkürler.

[This bug in the past has been worked round by fixing the daft sleeps in the ACPI DSDT and using the user DSDT support to replace it. In Karmic this is nolonger available due to upstream concerns about dammage to hardware. The norm is to try and quirk round these sorts of ACPI errors in the kernel. The work on karmic is related to detecting and avoiding those when using the existing borked DSDT.]

Mainly on Fujitsu laptops.
Exist on Karmic.
Win Vista does not have the same problem.
The solution in comment 10 works.

Every time I boot Ubuntu on my notebook, the boot procedure is delayed by 18 seconds. After selecting the kernel in the GRUB menu, the screen shows "Starting up", and then for 18 seconds absolutely nothing happens: no CPU activity, no disk activity, just waiting. After the delay, the boot procedure continues without errors or warnings.
When I reported this behavior to the ubuntuusers.de forum, it was confirmed by another user who uses the the same notebook model.

bassl  wrote on 2008-04-24:       #10

sudo apt-get install iasl #install iasl compiler
cat /proc/acpi/dsdt > dsdt.dat #extract your current dsdt to a file
iasl -d dsdt.dat #disassemble the dsdt,this will create a file dsdt.dsl
iasl -tc dsdt.dsl #recompile the dsdt and check possible error/warning

if you see some error/warning, edit dsdt.dsl with any text editor
search on google and http://www.cpqlinux.com/acpi-howto.html#fix_broken_dsdt your error/warnig and fix it.

for the 18sec delay:
open in a text editor your dsdt.dsl and search the function called "Sleep" in the section "Device (EC0)":
Sleep (0x2710) change the value to (0x3E8)
Sleep (0x1F40) change the value to (0x3E8)

recompile dsdt again.

install with initramfs:
sudo cp dsdt.aml /etc/initramfs-tools/DSDT.aml
sudo mkinitramfs -o /boot/initrd.img-`uname -r`
reboot

good luck

[heartsmagic]

Oh, yine mi hatalı DSDT muhabbeti Geçenlerde bir üyemizle daha bu işi kurcaladık ancak bir yere kadar gidebildik diye hatırlıyorum. Bu çözüm cidden çok özet bir şekilde anlatılmış ve bu kadar basitse ne âlâ.

Benim aklıma bir de Grub2 yerine Grub kullanmak geliyor fakat sorun hatalı DSDT ise o da işe yaramayabilir.

[thycpt737]

Evet bu forumdan takip ederek Grub2 den grub a geçmiştim, oda işe yaramayinca tekrar Grub2 ye dönmüştüm bayada bi zorlanmıştım. Bu hatalı DSDT nedir? Yani üretim hatası mı var pc de? Son olarak ben kurulumu flashdiskten yapmıştım, başka bir pcde ultraiso ile yazip yani, daha hızlı kurulum olsun diye. Acaba sorun bu olabilir mi? Artik hertürlü olasılığı düşünüyorum.Ubuntu çok mükemmel ve çok memnunum, birde açılışta makine 42 sn boyunca birşey yapmadan beklemese...Neyse sağlık olsun diyecez artık heralde ..Teşekkürler.

[heartsmagic]

Hatalı üretim vs. değil sanırım, yani doğrudan donanım sorunu değil. Sorun makinenin ACPI ayarları ve bizim kerneldeki bir uyuşmazlık gibi geliyor bana. Bu alıntı yaptığın yerdeki son bölümde anlatılan çözümü deneyebilirsin. Eline yeni bir initrd dosyası geçer ve eskisini ezer. Sistemi yeniden başlatınca onu kullanır. Tabii orada söylendiği gibi hatalı olan kısımları Google'dan aratıp çözmen gerekiyor. 18sn. meselesi için bir çözüm vermiş mesela orada. Daha sonra da initrd dosyası oluşturulmuş.

[thycpt737]

Benim Biosumda Acpi ayarlari mevcut degil.Pcnin Biosu pek gelişmiş değil açıkçası ve maalesef son update de bu. Grub menude acpi=off , on hepsini denedim, çözüm yok. Bahsettiğiniz komut satırınıda denedim ama son komutlarda sıkıntı var sanırım cünkü terminalde böyle bir dosya bulunamadi tarzi birsey diyordu (2 gün önce denemistimde aklimda kalan bu kadarmiş)

install with initramfs:
sudo cp dsdt.aml /etc/initramfs-tools/DSDT.aml
sudo mkinitramfs -o /boot/initrd.img-`uname -r`

Birde buradaki sleep değerlerinden sadece Sleep (0x1F40)  var bende, neyse çok önemli değil. Düzelticem derken bozucam diye korkuyorum.Genede yardımlarınız için çok teşekkürler.

[heartsmagic]

Bozmaktan korkma Yoksa ne öğrenebilirsin ne de sorunlarını çözebilirsin. Sana garanti veremem çözüm adına ancak denemekten zarar çıkmaz. En fazla sistem açılmaz Çalışan CD'den açar, dosyalarına erişirsin. Bunun da ötesinde yedek alırsan zaten geri getirmen kolay olur.

Şimdi burada yedekleyeceğin dosya en son kernel sürümüne ait initrd dosyası. Bende şu yani:

/boot/initrd.img-2.6.31-17-generic

Sende de kernel sürümüne göre bir tanesi olacaktır. Yedekle önce bunu:

Kod Seç Genişlet

sudo cp /boot/initrd.img-2.6.31-17-generic /boot/initrd.img-2.6.31-17-generic.yedek

Ardından yukarıdaki işlemlere geç. Fakat sen önce söylendiği üzere iasl kuracaksın. Kendi dsdt.dat dosyasın çıkartacaksın, bunu disassamble edeceksin, ardından derlemeye çalışacaksın. Bu arada hatalı olduğundan senin dsdt dosyan sorun verecek. Sorunları araştırıp düzelteceksin -ki onlardan biri anlatılmış ve çözüm sunulmuş-, ardından en son güzelce derlenen bu dosyayı initrd dosyasına yedireceksin. Diyelim ki yedirdiğin bu initrd dosyası ile sistem açılmadı? Yedeğin var. Çalışan CD ile girip yedeği geri alacaksın. Bu kadar

Takıldığın bir yer olursa burada sorarsın vakit bulursak bakmaya çalışırız.

[btermeli]

Aynı problem bende de var, biraz araştırdım. SD kart okuyucudan olduğu yazılı, şuan kart okuyucu çalışmıyor zaten ama sistemi açılışta 30 sn kadar bekletmesi inanılmaz geriyor.

Hata çıktısı;

Kod Seç Genişlet

80.810514] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen

HDD 2,5 IDE

Dmesg çıktısı;

Kod Seç Genişlet

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-22-generic (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #36-Ubuntu SMP Thu Jun 3 22:02:19 UTC 2010 (Ubuntu 2.6.32-22.36-generic 2.6.32.11+drm33.2)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003f7d0000 (usable)
[    0.000000]  BIOS-e820: 000000003f7d0000 - 000000003f7de000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003f7de000 - 000000003f800000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[    0.000000] DMI 2.3 present.
[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0x3f7d0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-DFFFF uncachable
[    0.000000]   E0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 base 03F800000 mask FFF800000 uncachable
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] PAT not supported by CPU.
[    0.000000] Scanning 0 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 000000000009fc00 (usable)
[    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000003f7d0000 (usable)
[    0.000000]  modified: 000000003f7d0000 - 000000003f7de000 (ACPI data)
[    0.000000]  modified: 000000003f7de000 - 000000003f800000 (ACPI NVS)
[    0.000000]  modified: 00000000ffb80000 - 0000000100000000 (reserved)
[    0.000000] initial memory mapped : 0 - 00c00000
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000] Using x86 segment limits to approximate NX protection
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[    0.000000] RAMDISK: 2f283000 - 2fa1b165
[    0.000000] ACPI: RSDP 000f79b0 00014 (v00 MSI   )
[    0.000000] ACPI: RSDT 3f7d0000 0003C (v01 MSI    1012     06142006 MSFT 00000097)
[    0.000000] ACPI: FACP 3f7d0200 00084 (v02 MSI    1012     06142006 MSFT 00000097)
[    0.000000] ACPI: DSDT 3f7d0430 03D89 (v01    MSI 1012     06142006 INTL 02002026)
[    0.000000] ACPI: FACS 3f7de000 00040
[    0.000000] ACPI: APIC 3f7d0390 00054 (v01 MSI    1012     06142006 MSFT 00000097)
[    0.000000] ACPI: MCFG 3f7d03f0 0003C (v01 MSI    1012     06142006 MSFT 00000097)
[    0.000000] ACPI: OEMB 3f7de040 00059 (v01 MSI    1012     06142006 MSFT 00000097)
[    0.000000] ACPI: MCFG 3f7d41c0 0003C (v01 MSI    1012     06142006 MSFT 00000097)
[    0.000000] ACPI: SSDT 3f7d4200 003CC (v01    AMI   CPU1PM 00000001 INTL 02002026)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 127MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000]   node 0 low ram: 00000000 - 377fe000
[    0.000000]   node 0 bootmap 00011000 - 00017f00
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 00008d9e98]    TEXT DATA BSS ==> [0000100000 - 00008d9e98]
[    0.000000]   #4 [002f283000 - 002fa1b165]          RAMDISK ==> [002f283000 - 002fa1b165]
[    0.000000]   #5 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
[    0.000000]   #6 [00008da000 - 00008dd0d1]              BRK ==> [00008da000 - 00008dd0d1]
[    0.000000]   #7 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
[    0.000000]   #8 [0000011000 - 0000018000]          BOOTMAP ==> [0000011000 - 0000018000]
[    0.000000] found SMP MP-table at [c00ff780] ff780
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0003f7d0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0003f7d0
[    0.000000] On node 0 totalpages: 259935
[    0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1001200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 256 pages used for memmap
[    0.000000]   HighMem zone: 32466 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 3f800000 (gap: 3f800000:c0380000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s36024 r0 d21320 u4194304
[    0.000000] pcpu-alloc: s36024 r0 d21320 u4194304 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257903
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=997e5cc4-4449-4629-a7ea-6143b695d257 ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] allocated 5200640 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:0003f7d0)
[    0.000000] Memory: 1009372k/1040192k available (4673k kernel code, 29936k reserved, 2121k data, 656k init, 130888k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc07a3000 - 0xc0847000   ( 656 kB)
[    0.000000]       .data : 0xc0590663 - 0xc07a2e48   (2121 kB)
[    0.000000]       .text : 0xc0100000 - 0xc0590663   (4673 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:2304 nr_irqs:256
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1862.679 MHz processor.
[    0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3725.35 BogoMIPS (lpj=7450716)
[    0.004024] Security Framework initialized
[    0.004052] AppArmor: AppArmor initialized
[    0.004061] Mount-cache hash table entries: 512
[    0.004199] Initializing cgroup subsys ns
[    0.004204] Initializing cgroup subsys cpuacct
[    0.004209] Initializing cgroup subsys memory
[    0.004219] Initializing cgroup subsys devices
[    0.004222] Initializing cgroup subsys freezer
[    0.004224] Initializing cgroup subsys net_cls
[    0.004252] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.004255] CPU: L2 cache: 2048K
[    0.004260] mce: CPU supports 5 MCE banks
[    0.004272] CPU0: Thermal monitoring enabled (TM2)
[    0.004281] Performance Events: p6 PMU driver.
[    0.004289] ... version:                0
[    0.004292] ... bit width:              32
[    0.004294] ... generic registers:      2
[    0.004296] ... value mask:             00000000ffffffff
[    0.004298] ... max period:             000000007fffffff
[    0.004301] ... fixed-purpose events:   0
[    0.004303] ... event mask:             0000000000000003
[    0.004307] Checking 'hlt' instruction... OK.
[    0.020919] SMP alternatives: switching to UP code
[    0.028544] Freeing SMP alternatives: 19k freed
[    0.028555] ACPI: Core revision 20090903
[    0.036009] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.036015] ftrace: allocating 21771 entries in 43 pages
[    0.040087] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.040410] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.080913] CPU0: Intel(R) Pentium(R) M processor 1.86GHz stepping 08
[    0.084001] Brought up 1 CPUs
[    0.084001] Total of 1 processors activated (3725.35 BogoMIPS).
[    0.084001] CPU0 attaching NULL sched-domain.
[    0.084001] devtmpfs: initialized
[    0.084001] regulator: core version 0.5
[    0.084001] Time: 17:32:30  Date: 06/23/10
[    0.084001] NET: Registered protocol family 16
[    0.084001] EISA bus registered
[    0.084001] ACPI: bus type pci registered
[    0.084001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.084001] PCI: Not using MMCONFIG.
[    0.084001] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
[    0.084001] PCI: Using configuration type 1 for base access
[    0.084001] bio: create slab <bio-0> at 0
[    0.084001] ACPI: EC: Look up EC in DSDT
[    0.084001] ACPI: Executed 1 blocks of module-level executable AML code
[    0.088278] ACPI: Interpreter enabled
[    0.088292] ACPI: (supports S0 S3 S4 S5)
[    0.088314] ACPI: Using IOAPIC for interrupt routing
[    0.088361] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.088606] ACPI: EC: GPE storm detected, transactions will use polling mode
[    0.092583] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[    0.092585] PCI: Using MMCONFIG for extended config space
[    0.097310] ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62
[    0.097397] ACPI Warning: Incorrect checksum in table [OEMB] - F1, should be E8 (20090903/tbutils-314)
[    0.097513] ACPI: No dock devices found.
[    0.097642] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.097724] pci 0000:00:02.0: reg 10 32bit mmio: [0xfbe80000-0xfbefffff]
[    0.097730] pci 0000:00:02.0: reg 14 io port: [0xdc00-0xdc07]
[    0.097735] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff]
[    0.097740] pci 0000:00:02.0: reg 1c 32bit mmio: [0xfbe40000-0xfbe7ffff]
[    0.097771] pci 0000:00:02.1: reg 10 32bit mmio: [0xfbd80000-0xfbdfffff]
[    0.097852] pci 0000:00:1d.0: reg 20 io port: [0xd880-0xd89f]
[    0.097898] pci 0000:00:1d.1: reg 20 io port: [0xd800-0xd81f]
[    0.097944] pci 0000:00:1d.2: reg 20 io port: [0xd480-0xd49f]
[    0.097992] pci 0000:00:1d.3: reg 20 io port: [0xd400-0xd41f]
[    0.098042] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfbe3bc00-0xfbe3bfff]
[    0.098093] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.098098] pci 0000:00:1d.7: PME# disabled
[    0.098171] pci 0000:00:1e.2: reg 10 io port: [0xd000-0xd0ff]
[    0.098177] pci 0000:00:1e.2: reg 14 io port: [0xcc00-0xcc3f]
[    0.098184] pci 0000:00:1e.2: reg 18 32bit mmio: [0xfbe3b800-0xfbe3b9ff]
[    0.098190] pci 0000:00:1e.2: reg 1c 32bit mmio: [0xfbe3b400-0xfbe3b4ff]
[    0.098216] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
[    0.098220] pci 0000:00:1e.2: PME# disabled
[    0.098246] pci 0000:00:1e.3: reg 10 io port: [0xc800-0xc8ff]
[    0.098253] pci 0000:00:1e.3: reg 14 io port: [0xc480-0xc4ff]
[    0.098286] pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold
[    0.098290] pci 0000:00:1e.3: PME# disabled
[    0.098353] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    0.098361] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[    0.098365] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[    0.098390] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[    0.098397] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[    0.098404] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[    0.098410] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[    0.098417] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
[    0.098475] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[    0.098525] pci 0000:01:03.0: reg 10 io port: [0xe800-0xe8ff]
[    0.098533] pci 0000:01:03.0: reg 14 32bit mmio: [0xfbfffc00-0xfbfffcff]
[    0.098595] pci 0000:01:05.0: reg 10 32bit mmio: [0x000000-0x000fff]
[    0.098614] pci 0000:01:05.0: supports D1 D2
[    0.098617] pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.098622] pci 0000:01:05.0: PME# disabled
[    0.098658] pci 0000:01:05.2: reg 10 32bit mmio: [0xfbfff800-0xfbfff8ff]
[    0.098705] pci 0000:01:05.2: supports D1 D2
[    0.098708] pci 0000:01:05.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.098712] pci 0000:01:05.2: PME# disabled
[    0.098747] pci 0000:01:05.3: reg 10 32bit mmio: [0xfbffe000-0xfbffefff]
[    0.098795] pci 0000:01:05.3: supports D1 D2
[    0.098797] pci 0000:01:05.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.098802] pci 0000:01:05.3: PME# disabled
[    0.098834] pci 0000:01:05.4: reg 10 32bit mmio: [0xfbffd000-0xfbffdfff]
[    0.098842] pci 0000:01:05.4: reg 14 32bit mmio: [0xfbfff000-0xfbfff7ff]
[    0.098881] pci 0000:01:05.4: supports D1 D2
[    0.098883] pci 0000:01:05.4: PME# supported from D0 D1 D2 D3hot
[    0.098888] pci 0000:01:05.4: PME# disabled
[    0.098929] pci 0000:01:09.0: reg 10 32bit mmio: [0xfbffc000-0xfbffcfff]
[    0.098977] pci 0000:01:09.0: PME# supported from D0 D3hot D3cold
[    0.098981] pci 0000:01:09.0: PME# disabled
[    0.099014] pci 0000:00:1e.0: transparent bridge
[    0.099021] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
[    0.099025] pci 0000:00:1e.0: bridge 32bit mmio: [0xfbf00000-0xfbffffff]
[    0.099051] pci_bus 0000:00: on NUMA node 0
[    0.099056] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.099203] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.108542] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 6 7 *10 11 12 14 15)
[    0.108650] ACPI: PCI Interrupt Link [LNKB] (IRQs *4 5 6 7 10 11 12 14 15)
[    0.108755] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 6 *7 10 11 12 14 15)
[    0.108859] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 *5 6 7 10 11 12 14 15)
[    0.108963] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 *6 7 10 11 12 14 15)
[    0.109068] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.109173] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 *5 6 7 10 11 12 14 15)
[    0.109278] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 *11 12 14 15)
[    0.109385] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.109395] vgaarb: loaded
[    0.109530] SCSI subsystem initialized
[    0.109583] libata version 3.00 loaded.
[    0.109666] usbcore: registered new interface driver usbfs
[    0.109679] usbcore: registered new interface driver hub
[    0.109705] usbcore: registered new device driver usb
[    0.109842] ACPI: WMI: Mapper loaded
[    0.109844] PCI: Using ACPI for IRQ routing
[    0.110005] NetLabel: Initializing
[    0.110007] NetLabel:  domain hash size = 128
[    0.110009] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.110024] NetLabel:  unlabeled traffic allowed by default
[    0.110171] hpet clockevent registered
[    0.110174] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.110180] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.110185] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.116010] Switching to clocksource tsc
[    0.118216] AppArmor: AppArmor Filesystem Enabled
[    0.118234] pnp: PnP ACPI init
[    0.118249] ACPI: bus type pnp registered
[    0.120240] pnp: PnP ACPI: found 14 devices
[    0.120243] ACPI: ACPI bus type pnp unregistered
[    0.120247] PnPBIOS: Disabled by ACPI PNP
[    0.120259] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[    0.120268] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[    0.120272] system 00:08: ioport range 0x800-0x87f has been reserved
[    0.120275] system 00:08: ioport range 0x480-0x4bf has been reserved
[    0.120279] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.120282] system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
[    0.120286] system 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved
[    0.120292] system 00:0a: iomem range 0xffc00000-0xfff7ffff has been reserved
[    0.120298] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.120301] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.120307] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[    0.120313] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[    0.120317] system 00:0d: iomem range 0xc0000-0xcffff could not be reserved
[    0.120320] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[    0.120324] system 00:0d: iomem range 0x100000-0x3f7fffff could not be reserved
[    0.155032] pci 0000:01:05.0: CardBus bridge, secondary bus 0000:02
[    0.155035] pci 0000:01:05.0:   IO window: 0x00e000-0x00e0ff
[    0.155040] pci 0000:01:05.0:   IO window: 0x00e400-0x00e4ff
[    0.155045] pci 0000:01:05.0:   PREFETCH window: 0x40000000-0x43ffffff
[    0.155050] pci 0000:01:05.0:   MEM window: 0x44000000-0x47ffffff
[    0.155056] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[    0.155059] pci 0000:00:1e.0:   IO window: 0xe000-0xefff
[    0.155064] pci 0000:00:1e.0:   MEM window: 0xfbf00000-0xfbffffff
[    0.155069] pci 0000:00:1e.0:   PREFETCH window: 0x40000000-0x43ffffff
[    0.155083] pci 0000:00:1e.0: setting latency timer to 64
[    0.155096]   alloc irq_desc for 19 on node -1
[    0.155098]   alloc kstat_irqs on node -1
[    0.155105] pci 0000:01:05.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.155113] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.155116] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.155119] pci_bus 0000:01: resource 0 io:  [0xe000-0xefff]
[    0.155122] pci_bus 0000:01: resource 1 mem: [0xfbf00000-0xfbffffff]
[    0.155125] pci_bus 0000:01: resource 2 pref mem [0x40000000-0x43ffffff]
[    0.155128] pci_bus 0000:01: resource 3 io:  [0x00-0xffff]
[    0.155131] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
[    0.155134] pci_bus 0000:02: resource 0 io:  [0xe000-0xe0ff]
[    0.155137] pci_bus 0000:02: resource 1 io:  [0xe400-0xe4ff]
[    0.155140] pci_bus 0000:02: resource 2 pref mem [0x40000000-0x43ffffff]
[    0.155143] pci_bus 0000:02: resource 3 mem: [0x44000000-0x47ffffff]
[    0.155179] NET: Registered protocol family 2
[    0.155272] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.155619] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.156775] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.157526] TCP: Hash tables configured (established 131072 bind 65536)
[    0.157530] TCP reno registered
[    0.157681] NET: Registered protocol family 1
[    0.157713] pci 0000:00:02.0: Boot video device
[    0.158044] cpufreq-nforce2: No nForce2 chipset.
[    0.158080] Scanning for low memory corruption every 60 seconds
[    0.158213] audit: initializing netlink socket (disabled)
[    0.158235] type=2000 audit(1277314350.155:1): initialized
[    0.169426] Trying to unpack rootfs image as initramfs...
[    0.184361] highmem bounce pool size: 64 pages
[    0.184369] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.186072] VFS: Disk quotas dquot_6.5.2
[    0.186137] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.186796] fuse init (API version 7.13)
[    0.186893] msgmni has been set to 1716
[    0.192403] alg: No test for stdrng (krng)
[    0.192481] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.192485] io scheduler noop registered
[    0.192487] io scheduler anticipatory registered
[    0.192490] io scheduler deadline registered
[    0.192534] io scheduler cfq registered (default)
[    0.192644] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.192671] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.192827] ACPI: AC Adapter [ADP1] (on-line)
[    0.192921] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.192926] ACPI: Power Button [PWRB]
[    0.192973] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    0.193022] ACPI: Lid Switch [LID0]
[    0.193076] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    0.193079] ACPI: Sleep Button [SLPB]
[    0.193123] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.193125] ACPI: Power Button [PWRF]
[    0.193611] Marking TSC unstable due to TSC halts in idle
[    0.193663] processor LNXCPU:00: registered as cooling_device0
[    0.195491] Switching to clocksource hpet
[    0.208572] ACPI: Invalid active0 threshold
[    0.224449] thermal LNXTHERM:01: registered as thermal_zone0
[    0.224464] ACPI: Thermal Zone [THRM] (75 C)
[    0.226168] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.226618]   alloc irq_desc for 20 on node -1
[    0.226621]   alloc kstat_irqs on node -1
[    0.226630] serial 0000:00:1e.3: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[    0.226639] serial 0000:00:1e.3: PCI INT B disabled
[    0.227712] brd: module loaded
[    0.232453] ACPI: Battery Slot [BAT1] (battery absent)
[    0.232476] isapnp: Scanning for PnP cards...
[    0.238206] loop: module loaded
[    0.238322] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[    0.238453] ata_piix 0000:00:1f.1: version 2.13
[    0.238469]   alloc irq_desc for 18 on node -1
[    0.238472]   alloc kstat_irqs on node -1
[    0.238483] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.238535] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.238626] scsi0 : ata_piix
[    0.238712] scsi1 : ata_piix
[    0.240519] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    0.240523] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    0.240918] Fixed MDIO Bus: probed
[    0.240960] PPP generic driver version 2.4.2
[    0.241011] tun: Universal TUN/TAP device driver, 1.6
[    0.241013] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.241102] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.241124]   alloc irq_desc for 23 on node -1
[    0.241126]   alloc kstat_irqs on node -1
[    0.241131] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.241151] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.241155] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.241192] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.241223] ehci_hcd 0000:00:1d.7: debug port 1
[    0.245121] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.296220] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbe3bc00
[    0.316258] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.316438] usb usb1: configuration #1 chosen from 1 choice
[    0.316475] hub 1-0:1.0: USB hub found
[    0.316487] hub 1-0:1.0: 8 ports detected
[    0.316570] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.316594] uhci_hcd: USB Universal Host Controller Interface driver
[    0.316667] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.316678] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.316682] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.316733] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.316766] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d880
[    0.316878] usb usb2: configuration #1 chosen from 1 choice
[    0.316906] hub 2-0:1.0: USB hub found
[    0.316914] hub 2-0:1.0: 2 ports detected
[    0.316963] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.316970] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.316973] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.317007] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.317041] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800
[    0.317131] usb usb3: configuration #1 chosen from 1 choice
[    0.317163] hub 3-0:1.0: USB hub found
[    0.317170] hub 3-0:1.0: 2 ports detected
[    0.317219] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.317225] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.317229] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.317266] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.317297] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d480
[    0.317399] usb usb4: configuration #1 chosen from 1 choice
[    0.317425] hub 4-0:1.0: USB hub found
[    0.317432] hub 4-0:1.0: 2 ports detected
[    0.317479]   alloc irq_desc for 16 on node -1
[    0.317482]   alloc kstat_irqs on node -1
[    0.317492] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    0.317497] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.317501] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.317531] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.317559] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d400
[    0.317651] usb usb5: configuration #1 chosen from 1 choice
[    0.317678] hub 5-0:1.0: USB hub found
[    0.317685] hub 5-0:1.0: 2 ports detected
[    0.317796] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.331928] i8042.c: Detected active multiplexing controller, rev 1.1.
[    0.339045] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.339060] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.339114] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.339138] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.339165] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.339329] mice: PS/2 mouse device common for all mice
[    0.339525] rtc_cmos 00:03: RTC can wake from S4
[    0.339575] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.339606] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[    0.339765] device-mapper: uevent: version 1.0.3
[    0.342059] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.343804] device-mapper: multipath: version 1.1.0 loaded
[    0.343808] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.344427] EISA: Probing bus 0 at eisa.0
[    0.344457] EISA: Detected 0 cards.
[    0.345665] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[    0.348097] cpuidle: using governor ladder
[    0.348178] cpuidle: using governor menu
[    0.348660] TCP cubic registered
[    0.348840] NET: Registered protocol family 10
[    0.349331] lo: Disabled Privacy Extensions
[    0.349652] NET: Registered protocol family 17
[    0.349954] Using IPI No-Shortcut mode
[    0.350066] PM: Resume from disk failed.
[    0.350080] registered taskstats version 1
[    0.350356]   Magic number: 14:10:543
[    0.350471] rtc_cmos 00:03: setting system clock to 2010-06-23 17:32:30 UTC (1277314350)
[    0.350475] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.350477] EDD information not available.
[    0.422330] ata1.00: ATA-8: SAMSUNG HM160HC, LQ100-10, max UDMA/100
[    0.422335] ata1.00: 312581808 sectors, multi 16: LBA48
[    0.422377] ata1.01: ATAPI: PHILIPS DVD+/-RW SDVD8441, PX41, max UDMA/33
[    0.438574] ata1.00: configured for UDMA/100
[    0.452520] ata1.01: configured for UDMA/33
[    0.681466] Freeing initrd memory: 7776k freed
[    0.819324] isapnp: No Plug & Play device found
[    0.819552] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HM160HC  LQ10 PQ: 0 ANSI: 5
[    0.819793] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.821022] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    0.821074] sd 0:0:0:0: [sda] Write Protect is off
[    0.821077] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.821103] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.821280]  sda: sda1 sda2 sda3 <
[    0.865442] scsi 0:0:1:0: CD-ROM            PHILIPS  DVD+-RW SDVD8441 PX41 PQ: 0 ANSI: 5
[    0.880891]  sda5 sda6 sda7 >
[    0.949462] sr0: scsi3-mmc drive: 12x/24x writer cd/rw xa/form2 cdda tray
[    0.949466] Uniform CD-ROM driver Revision: 3.20
[    0.949546] sr 0:0:1:0: Attached scsi CD-ROM sr0
[    0.949603] sr 0:0:1:0: Attached scsi generic sg1 type 5
[    0.949728] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.949747] Freeing unused kernel memory: 656k freed
[    0.950248] Write protecting the kernel text: 4676k
[    0.950286] Write protecting the kernel read-only data: 1840k
[    0.967130] udev: starting version 151
[    1.219935] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    1.219967] 8139cp 0000:01:03.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[    1.228268] 8139too Fast Ethernet driver 0.9.28
[    1.228304]   alloc irq_desc for 22 on node -1
[    1.228306]   alloc kstat_irqs on node -1
[    1.228318] 8139too 0000:01:03.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    1.229432] eth0: RealTek RTL8139 at 0xe800, 00:13:d3:f0:66:35, IRQ 22
[    1.229701] ohci1394 0000:01:05.4: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.285043] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[fbffd000-fbffd7ff]  Max Packet=[2048]  IR/IT contexts=[8/8]
[    2.560285] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00dc10008b86ea00]
[    6.506644] EXT4-fs (sda5): mounted filesystem with ordered data mode
[   15.608047] udev: starting version 151
[   15.826487] lp: driver loaded but no devices found
[   15.845564] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[   15.845638] ACPI: Video Device [IGFX] (multi-head: yes  rom: no  post: no)
[   15.905833] Linux agpgart interface v0.103
[   16.064815] intel_rng: FWH not detected
[   16.157211] lib80211: common routines for IEEE802.11 drivers
[   16.157216] lib80211_crypt: registered algorithm 'NULL'
[   16.157684] [drm] Initialized drm 1.1.0 20060810
[   16.165181] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
[   16.165858] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[   16.184465] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[   16.203076] type=1505 audit(1277307166.349:2):  operation="profile_load" pid=600 name="/sbin/dhclient3"
[   16.203725] type=1505 audit(1277307166.349:3):  operation="profile_load" pid=600 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   16.204125] type=1505 audit(1277307166.353:4):  operation="profile_load" pid=600 name="/usr/lib/connman/scripts/dhclient-script"
[   16.212423] ieee80211: 802.11 data/management/control stack, git-1.1.13
[   16.212429] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[   16.227943] yenta_cardbus 0000:01:05.0: CardBus bridge found [1462:0121]
[   16.227966] yenta_cardbus 0000:01:05.0: O2: res at 0x94/0xD4: 00/ea
[   16.227969] yenta_cardbus 0000:01:05.0: O2: enabling read prefetch/write burst
[   16.271395] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[   16.271404] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[   16.327955] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   16.327962] i915 0000:00:02.0: setting latency timer to 64
[   16.338741] [drm] set up 7M of stolen space
[   16.442710] yenta_cardbus 0000:01:05.0: ISA IRQ mask 0x0cb8, PCI irq 19
[   16.442714] yenta_cardbus 0000:01:05.0: Socket status: 30000006
[   16.442719] pci_bus 0000:01: Raising subordinate bus# of parent bus (#01) from #02 to #05
[   16.442730] yenta_cardbus 0000:01:05.0: pcmcia: parent PCI bridge I/O window: 0xe000 - 0xefff
[   16.442734] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xe000-0xefff: clean.
[   16.442948] yenta_cardbus 0000:01:05.0: pcmcia: parent PCI bridge Memory window: 0xfbf00000 - 0xfbffffff
[   16.442952] yenta_cardbus 0000:01:05.0: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff
[   16.448290]   alloc irq_desc for 17 on node -1
[   16.448294]   alloc kstat_irqs on node -1
[   16.448303] ipw2200 0000:01:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   16.450386] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[   16.450448] ipw2200 0000:01:09.0: firmware: requesting ipw2200-bss.fw
[   16.597761] [drm] initialized overlay support
[   16.946866] ipw2200: Radio Frequency Kill Switch is On:
[   16.946869] Kill switch must be turned off for wireless networking to work.
[   16.948331] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
[   16.972814] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[   16.973971] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[   16.974308] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[   16.974565] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[   16.975125] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[   17.334837] Synaptics `imleçsürer`, model: 1, fw: 5.9, id: 0xa56eb1, caps: 0x804713/0x0
[   17.339401] fb0: inteldrmfb frame buffer device
[   17.339405] registered panic notifier
[   17.339415] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   17.339465] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   17.339485] Intel ICH 0000:00:1e.2: setting latency timer to 64
[   17.344709] vga16fb: initializing
[   17.344713] vga16fb: mapped to 0xc00a0000
[   17.344717] vga16fb: not registering due to another framebuffer present
[   17.387887] input: SynPS/2 Synaptics `imleçsürer` as /devices/platform/i8042/serio1/input/input7
[   17.543166] Console: switching to colour frame buffer device 160x48
[   18.224053] intel8x0_measure_ac97_clock: measured 55470 usecs (2672 samples)
[   18.224060] intel8x0: clocking to 48000
[   18.615852] EXT4-fs (sda7): mounted filesystem with ordered data mode
[   22.126571] eth0: link down
[   22.127084] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   22.145592] type=1505 audit(1277307172.293:5):  operation="profile_load" pid=796 name="/usr/share/gdm/guest-session/Xsession"
[   22.149238] type=1505 audit(1277307172.297:6):  operation="profile_replace" pid=797 name="/sbin/dhclient3"
[   22.150700] type=1505 audit(1277307172.297:7):  operation="profile_replace" pid=797 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   22.151060] type=1505 audit(1277307172.297:8):  operation="profile_replace" pid=797 name="/usr/lib/connman/scripts/dhclient-script"
[   22.160376] type=1505 audit(1277307172.309:9):  operation="profile_load" pid=798 name="/usr/bin/evince"
[   22.183928] type=1505 audit(1277307172.329:10):  operation="profile_load" pid=798 name="/usr/bin/evince-previewer"
[   22.199352] type=1505 audit(1277307172.345:11):  operation="profile_load" pid=798 name="/usr/bin/evince-thumbnailer"
[   22.208207] type=1505 audit(1277307172.357:12):  operation="profile_load" pid=864 name="/usr/lib/cups/backend/cups-pdf"
[   22.209005] type=1505 audit(1277307172.357:13):  operation="profile_load" pid=864 name="/usr/sbin/cupsd"
[   22.222664] type=1505 audit(1277307172.369:14):  operation="profile_load" pid=866 name="/usr/sbin/mysqld-akonadi"
[   22.957322] ppdev: user-space parallel port driver
[   24.216477] usb 1-1: new high speed USB device using ehci_hcd and address 2
[   24.349403] usb 1-1: configuration #1 chosen from 1 choice
[   24.349955] hub 1-1:1.0: USB hub found
[   24.350246] hub 1-1:1.0: 4 ports detected
[   24.624406] usb 1-1.1: new high speed USB device using ehci_hcd and address 3
[   24.717416] usb 1-1.1: configuration #1 chosen from 1 choice
[   24.717963] hub 1-1.1:1.0: USB hub found
[   24.718258] hub 1-1.1:1.0: 4 ports detected
[   24.796277] usb 1-1.2: new low speed USB device using ehci_hcd and address 4
[   24.907422] usb 1-1.2: configuration #1 chosen from 1 choice
[   24.932596] usbcore: registered new interface driver hiddev
[   24.942624] input:   USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.2/1-1.2:1.0/input/input8
[   24.942845] generic-usb 0003:04D9:1603.0001: input,hidraw0: USB HID v1.10 Keyboard [  USB Keyboard] on usb-0000:00:1d.7-1.2/input0
[   24.959652] input:   USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.2/1-1.2:1.1/input/input9
[   24.959799] generic-usb 0003:04D9:1603.0002: input,hidraw1: USB HID v1.10 Device [  USB Keyboard] on usb-0000:00:1d.7-1.2/input1
[   24.959821] usbcore: registered new interface driver usbhid
[   24.960781] usbhid: v2.6:USB HID core driver
[   24.992288] usb 1-1.1.1: new low speed USB device using ehci_hcd and address 5
[   25.092155] usb 1-1.1.1: configuration #1 chosen from 1 choice
[   25.096710] input: Acrox USB & PS/2 Mouse as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.0/input/input10
[   25.096828] generic-usb 0003:0F62:1001.0003: input,hidraw2: USB HID v1.10 Mouse [Acrox USB & PS/2 Mouse] on usb-0000:00:1d.7-1.1.1/input0
[   25.168296] usb 1-1.1.2: new full speed USB device using ehci_hcd and address 6
[   25.261449] usb 1-1.1.2: configuration #1 chosen from 1 choice
[   25.296842] Linux video capture interface: v2.00
[   25.403236] gspca: main v2.7.0 registered
[   25.404262] gspca: probing 046d:08da
[   28.368505] zc3xx: probe 2wr ov vga 0x0000
[   28.400506] zc3xx: probe sensor -> 0011
[   28.400514] zc3xx: Find Sensor HV7131R(c)
[   28.401185] gspca: probe ok
[   28.401373] gspca: probing 046d:08da
[   28.401397] gspca: probing 046d:08da
[   28.401430] usbcore: registered new interface driver zc3xx
[   28.401434] zc3xx: registered
[   28.405398] STV06xx: Probing for a stv06xx device
[   28.405405] gspca: probing 046d:08da
[   28.405588] STV06xx: Probing for a stv06xx device
[   28.405591] gspca: probing 046d:08da
[   28.408256] usbcore: registered new interface driver STV06xx
[   28.408877] STV06xx: registered
[   28.546225] usbcore: registered new interface driver snd-usb-audio
[  103.941588] ADDRCONF(NETDEV_UP): eth1: link is not ready
[  110.757641] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[  110.770978] lib80211_crypt: registered algorithm 'CCMP'
[  110.778275] padlock: VIA PadLock not detected.
[  110.784801] lib80211_crypt: registered algorithm 'TKIP'
[  120.808025] eth1: no IPv6 routers present
[  192.712406] usb 1-1.1.3: new high speed USB device using ehci_hcd and address 7
[  192.806916] usb 1-1.1.3: configuration #1 chosen from 1 choice
[  192.873125] Initializing USB Mass Storage driver...
[  192.873301] scsi2 : SCSI emulation for USB Mass Storage devices
[  192.873459] usbcore: registered new interface driver usb-storage
[  192.873462] USB Mass Storage support registered.
[  192.881085] usb-storage: device found at 7
[  192.881089] usb-storage: waiting for device to settle before scanning
[  197.880192] usb-storage: device scan complete
[  197.882935] scsi 2:0:0:0: Direct-Access     Seagate  External Drive        PQ: 0 ANSI: 0
[  197.888822] sd 2:0:0:0: Attached scsi generic sg2 type 0
[  197.902307] sd 2:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[  197.903625] sd 2:0:0:0: [sdb] Write Protect is off
[  197.903629] sd 2:0:0:0: [sdb] Mode Sense: 27 00 00 00
[  197.903633] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[  197.906007] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[  197.906015]  sdb: sdb1
[  197.938919] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[  197.938931] sd 2:0:0:0: [sdb] Attached SCSI disk
[  290.359592] usb 1-1.1.3: USB disconnect, address 7

Bu konuda çözüm bulan var mı?

[heartsmagic]

Üst seriden bir çekirdek kurup denedin mi?