Acil gpu driver kurulu monodeset kurulum sonrası lütfen

Başlatan metimkhrmn7, 22 Nisan 2017 - 03:35:12

« önceki - sonraki »

0 Üyeler ve 2 Ziyaretçi konuyu incelemekte.

metimkhrmn7

Merhaba sistemim sürekli nvidia ekran kartını kullanıyor güç tasarrufu için otomatik geçişi veya geçişi nasıl ayarlayabilirim ? doğru yapılandırmayı nasıl yapabilirim ?

lsb_release -a

No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 16.04.2 LTS
Release: 16.04
Codename: xenial



lspci -nnk | egrep "VGA|3D|Display" -A2



00:02.0 VGA compatible controller [0300]: Intel Corporation Skylake Integrated Graphics [8086:191b] (rev 06)
DeviceName:  Onboard IGD
Subsystem: Device [1d05:1019]
--
01:00.0 3D controller [0302]: NVIDIA Corporation GM206M [GeForce GTX 965M] [10de:1427] (rev a1)
Subsystem: Device [1d05:1019]
Kernel driver in use: nvidia





glxinfo | grep render




Kodu yazınca pc donuyor




xrandr



Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 16384 x 16384
eDP-1-1 connected primary 1920x1080+0+0 344mm x 194mm
   1920x1080     60.02*+  59.93 
   1680x1050     59.95    59.88 
   1600x1024     60.17 
   1400x1050     59.98 
   1280x1024     60.02 
   1440x900      59.89 
   1280x960      60.00 
   1360x768      59.80    59.96 
   1152x864      60.00 
   1024x768      60.04    60.00 
   960x720       60.00 
   928x696       60.05 
   896x672       60.01 
   960x600       60.00 
   960x540       59.99 
   800x600       60.00    60.32    56.25 
   840x525       60.01    59.88 
   800x512       60.17 
   700x525       59.98 
   640x512       60.02 
   720x450       59.89 
   640x480       60.00    59.94 
   680x384       59.80    59.96 
   576x432       60.06 
   512x384       60.00 
   400x300       60.32    56.34 
   320x240       60.05 
HDMI-1-1 disconnected





dpkg -l | egrep "nvidia|bumblebee|nvidia-prime|fglrx"



ii  nvidia-375                                  375.39-0ubuntu0.16.04.1                       amd64        NVIDIA binary driver - version 375.39
ii  nvidia-opencl-icd-375                       375.39-0ubuntu0.16.04.1                       amd64        NVIDIA OpenCL ICD
ii  nvidia-prime                                0.8.2                                         amd64        Tools to enable NVIDIA's Prime
ii  nvidia-settings                             361.42-0ubuntu1                               amd64        Tool for configuring the NVIDIA graphics driver




mendirec

[mention=623523]@metimkhrmn7[/mention] Nvidia-Settings üzerinden geçiş yapabiliyor musun?

metimkhrmn7

#2
Teşekkürler yapabiliyormuşum ama otomatik geçiş yok mu  restart atmam gerekiyor bide sistem bazen kapanmıyo reset atmıyo uyhulamalar anlamsız donuyor sebebi ne olabilir ? Tuşa uzun basarak kapatmak zorunda kalıyorum uyku modundan çıkınca klavye falan çalışmayabiliyor 

mendirec

[mention=623556]@metimkhrmn7[/mention] Prime yönteminde otomatik geçiş yok. Ya oturumu kapatıp yeniden açacaksın ya da bilgisayarı yeniden başlatacaksın. Şu an durum nedir? Donmalar devam ediyor mu? Bilgisayarın marka ve modelini de öğrenelim. Şu komutların çıktıları da lütfen.
ubuntu-driver list
lspci -nnk | egrep "VGA|3D|Display" -A2
dpkg -l | egrep "nvidia|bumblebee|nvidia-prime|fglrx"

metimkhrmn7

ubuntu-drivers list


intel-microcode
nvidia-375


lspci -nnk | egrep "VGA|3D|Display" -A2

00:02.0 VGA compatible controller [0300]: Intel Corporation Skylake Integrated Graphics [8086:191b] (rev 06)
DeviceName:  Onboard IGD
Subsystem: Device [1d05:1019]
--
01:00.0 3D controller [0302]: NVIDIA Corporation GM206M [GeForce GTX 965M] [10de:1427] (rev a1)
Subsystem: Device [1d05:1019]
Kernel modules: nvidiafb, nouveau


dpkg -l | egrep "nvidia|bumblebee|nvidia-prime|fglrx"


çıktı vermiyor


format attım çok acil yardımınıza ihtiyacım var driver açısından
gpu özelliklxerde Gallium 0.4 on llvmpipe (LLVM 3.8, 256 bits) görünüyor
ve sadece 800x600 çözünürlüğüm var lütfen

mendirec

[mention=623739]@metimkhrmn7[/mention] İlk önce şu komutu yürüt.
sudo apt install nvidia-375
Bilgisayarı yeniden başlatmadan çıktıları buraya geç lütfen.

metimkhrmn7

#6
https://wiki.ubuntu-tr.net/index.php?title=Bumblebee
Adımlar uyguladım pc hiç açılmıyor tekrar format atıyorum ssd disk kullanıyorum i7 6700hq var ve onun intel gpusu nvidia 965m kart var tekrar nomodeseti kullanıyorum yoksa ubuntu yazıp donuyor kurulumda 1 haftadır bilgisayarım yok format sonrası dediğiniz kodu tekrar yazayım mı lütfen yardımcı olun teşekkürler pc marka model monster abra a5 v8.1

mendirec

[mention=623752]@metimkhrmn7[/mention] Şimdilik Bumblebee kurmayalım. Çıktıların tamamını tekrar buraya geçer misin?

metimkhrmn7

#8
lsb_release -a


No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 16.04.2 LTS
Release: 16.04
Codename: xenial



lspci -nnk | egrep "VGA|3D|Display" -A2

00:02.0 VGA compatible controller [0300]: Intel Corporation Skylake Integrated Graphics [8086:191b] (rev 06)
DeviceName:  Onboard IGD
Subsystem: Device [1d05:1019]
--
01:00.0 3D controller [0302]: NVIDIA Corporation GM206M [GeForce GTX 965M] [10de:1427] (rev a1)
Subsystem: Device [1d05:1019]
Kernel modules: nvidiafb, nouveau, nvidia_375_drm, nvidia_375



glxinfo | grep render

direct rendering: Yes
    GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer,
    GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer,
Extended renderer info (GLX_MESA_query_renderer):
OpenGL renderer string: Mesa DRI Intel(R) HD Graphics 530 (Skylake GT2)
    GL_ARB_conditional_render_inverted, GL_ARB_conservative_depth,
    GL_MESA_texture_signed_rgba, GL_NV_conditional_render, GL_NV_depth_clamp,
    GL_ARB_compute_shader, GL_ARB_conditional_render_inverted,
    GL_NV_conditional_render, GL_NV_depth_clamp, GL_NV_light_max_exponent,
    GL_OES_element_index_uint, GL_OES_fbo_render_mipmap,


xrandır
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192
eDP-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 194mm
   1920x1080     60.02*+  59.93 
   1680x1050     59.95    59.88 
   1600x1024     60.17 
   1400x1050     59.98 
   1280x1024     60.02 
   1440x900      59.89 
   1280x960      60.00 
   1360x768      59.80    59.96 
   1152x864      60.00 
   1024x768      60.04    60.00 
   960x720       60.00 
   928x696       60.05 
   896x672       60.01 
   960x600       60.00 
   960x540       59.99 
   800x600       60.00    60.32    56.25 
   840x525       60.01    59.88 
   800x512       60.17 
   700x525       59.98 
   640x512       60.02 
   720x450       59.89 
   640x480       60.00    59.94 
   680x384       59.80    59.96 
   576x432       60.06 
   512x384       60.00 
   400x300       60.32    56.34 
   320x240       60.05 
HDMI-1 disconnected (normal left inverted right x axis y axis)

dpkg -l | egrep "nvidia|bumblebee|nvidia-prime|fglrx"
ii  nvidia-375                                 375.39-0ubuntu0.16.04.1                       amd64        NVIDIA binary driver - version 375.39
ii  nvidia-opencl-icd-375                      375.39-0ubuntu0.16.04.1                       amd64        NVIDIA OpenCL ICD
ii  nvidia-prime                               0.8.2                                         amd64        Tools to enable NVIDIA's Prime
ii  nvidia-settings                            361.42-0ubuntu1                               amd64        Tool for configuring the NVIDIA graphics driver



Çıktılar bunlar cihaz kapanmıyordu laptop mode tools kurdum sorun çözüldü ama nvidia karta logout ile geçiş yapamıyorum pc ye reset atmam gerekiyor bunun dısında şuan sistem iyi çalışıyor sanırım tam emin olmamakla beraber 4 saatir kullanıyorum bu No LSB modules are available. nedir ?

mendirec

[mention=623962]@metimkhrmn7[/mention] BIOS/UEFI üzerinde Secure Boot açık mı? Şu komutu yürüttükten sonra ev dizininde dmesg adlı bir dosya oluşacacak. İçeriğini buraya geçer misin?
dmesg > dmesg

metimkhrmn7

dmesg > dmesg çıktısı bios secure boot kapalı teşekkürler



[    0.000000] Linux version 4.8.0-49-generic (buildd@lcy01-26) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #52~16.04.1-Ubuntu SMP Thu Apr 20 10:55:59 UTC 2017 (Ubuntu 4.8.0-49.52~16.04.1-generic 4.8.17)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-49-generic.efi.signed root=UUID=b8ac5b59-85b6-4e8b-8280-9f4415bdc058 ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007837afff] usable
[    0.000000] BIOS-e820: [mem 0x000000007837b000-0x000000007837bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007837c000-0x00000000783c5fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000783c6000-0x000000007ba61fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ba62000-0x000000007c4f4fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007c4f5000-0x000000007c9d5fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007c9d6000-0x000000007ce79fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007ce7a000-0x000000007d29dfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007d29e000-0x000000007d2fdfff] type 20
[    0.000000] BIOS-e820: [mem 0x000000007d2fe000-0x000000007d2fefff] usable
[    0.000000] BIOS-e820: [mem 0x000000007d300000-0x000000007d3fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.40 by American Megatrends
[    0.000000] efi:  ESRT=0x7d1d4f98  ACPI=0x7cbde000  ACPI 2.0=0x7cbde000  SMBIOS=0x7d1d3000  SMBIOS 3.0=0x7d1d2000
[    0.000000] esrt: Reserving ESRT space from 0x000000007d1d4f98 to 0x000000007d1d4fd0.
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x27f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0080000000 mask 7F80000000 uncachable
[    0.000000]   1 base 007E000000 mask 7FFE000000 uncachable
[    0.000000]   2 base 007D800000 mask 7FFF800000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT 
[    0.000000] e820: last_pfn = 0x7d2ff max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff964ac0098000] 98000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x1703b000, 0x1703bfff] PGTABLE
[    0.000000] BRK [0x1703c000, 0x1703cfff] PGTABLE
[    0.000000] BRK [0x1703d000, 0x1703dfff] PGTABLE
[    0.000000] BRK [0x1703e000, 0x1703efff] PGTABLE
[    0.000000] BRK [0x1703f000, 0x1703ffff] PGTABLE
[    0.000000] BRK [0x17040000, 0x17040fff] PGTABLE
[    0.000000] BRK [0x17041000, 0x17041fff] PGTABLE
[    0.000000] BRK [0x17042000, 0x17042fff] PGTABLE
[    0.000000] BRK [0x17043000, 0x17043fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x32712000-0x35380fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000007CBDE000 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x000000007CBDE0A0 0000BC (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x000000007CBFDDA0 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x000000007CBDE1F0 01FBAE (v02 ALASKA A M I    01072009 INTL 20120913)
[    0.000000] ACPI: FACS 0x000000007CE76F80 000040
[    0.000000] ACPI: APIC 0x000000007CBFDEB0 0000BC (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x000000007CBFDF70 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FIDT 0x000000007CBFDFB8 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x000000007CBFE058 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x000000007CBFE098 000038 (v01 ALASKA A M I    01072009 AMI. 0005000B)
[    0.000000] ACPI: SSDT 0x000000007CBFE0D0 000315 (v01 SataRe SataTabl 00001000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x000000007CBFE3E8 00054B (v02 INTEL  Ther_Rvp 00001000 INTL 20120913)
[    0.000000] ACPI: DBGP 0x000000007CBFE938 000034 (v01 INTEL           00000000 MSFT 0000005F)
[    0.000000] ACPI: DBG2 0x000000007CBFE970 000054 (v00 INTEL           00000000 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x000000007CBFE9C8 0006AE (v02 INTEL  xh_rvp11 00000000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x000000007CBFF078 00568F (v02 SaSsdt SaSsdt   00003000 INTL 20120913)
[    0.000000] ACPI: UEFI 0x000000007CC04708 000042 (v01                 00000000      00000000)
[    0.000000] ACPI: SSDT 0x000000007CC04750 000E73 (v02 CpuRef CpuSsdt  00003000 INTL 20120913)
[    0.000000] ACPI: BGRT 0x000000007CC055C8 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x000000007CC05600 00009F (v02 SgRef  SgPeg    00001000 INTL 20120913)
[    0.000000] ACPI: DMAR 0x000000007CC056A0 0000A8 (v01 INTEL  SKL      00000001 INTL 00000001)
[    0.000000] ACPI: TPM2 0x000000007CC05748 000034 (v03        Tpm2Tabl 00000001 AMI  00000000)
[    0.000000] ACPI: SSDT 0x000000007CC05780 001A50 (v01 OptRef OptTabl  00001000 INTL 20120913)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000027effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x27eff9000-0x27effdfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000027effffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007837afff]
[    0.000000]   node   0: [mem 0x00000000783c6000-0x000000007ba61fff]
[    0.000000]   node   0: [mem 0x000000007c4f5000-0x000000007c9d5fff]
[    0.000000]   node   0: [mem 0x000000007d2fe000-0x000000007d2fefff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000027effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027effffff]
[    0.000000] On node 0 totalpages: 2076309
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 22 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7868 pages used for memmap
[    0.000000]   DMA32 zone: 503545 pages, LIFO batch:31
[    0.000000]   Normal zone: 24512 pages used for memmap
[    0.000000]   Normal zone: 1568768 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x000000007e000000-0x000000007fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7837b000-0x7837bfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7837c000-0x783c5fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7ba62000-0x7c4f4fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7c9d6000-0x7ce79fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7ce7a000-0x7d29dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7d29e000-0x7d2fdfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7d2ff000-0x7d2fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7d300000-0x7d3fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7d400000-0x7dffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7e000000-0x7fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x80000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 36 pages/cpu @ffff964d3ec00000 s107864 r8192 d31400 u262144
[    0.000000] pcpu-alloc: s107864 r8192 d31400 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2043843
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-49-generic.efi.signed root=UUID=b8ac5b59-85b6-4e8b-8280-9f4415bdc058 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7975136K/8305236K available (8829K kernel code, 1441K rwdata, 3836K rodata, 1548K init, 1296K bss, 330100K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] Build-time adjustment of leaf fanout to 64.
[    0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:2048 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Detected 2600.000 MHz processor
[    0.000027] Calibrating delay loop (skipped), value calculated using timer frequency.. 5184.00 BogoMIPS (lpj=10368000)
[    0.000031] pid_max: default: 32768 minimum: 301
[    0.000039] ACPI: Core revision 20160422
[    0.037048] ACPI: 8 ACPI AML tables successfully acquired and loaded

[    0.037557] Security Framework initialized
[    0.037557] Yama: becoming mindful.
[    0.037570] AppArmor: AppArmor initialized
[    0.037947] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.039263] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.039859] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.039865] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.040152] CPU: Physical Processor ID: 0
[    0.040153] CPU: Processor Core ID: 0
[    0.040157] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.040157] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.040161] mce: CPU supports 10 MCE banks
[    0.040170] CPU0: Thermal monitoring enabled (TM1)
[    0.040188] process: using mwait in idle threads
[    0.040190] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.040191] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.040532] Freeing SMP alternatives memory: 32K (ffffffffbe8ed000 - ffffffffbe8f5000)
[    0.043790] ftrace: allocating 33453 entries in 131 pages
[    0.057575] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.057576] smpboot: Max logical packages: 2
[    0.057579] DMAR: Host address width 39
[    0.057580] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.057585] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
[    0.057586] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.057589] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.057590] DMAR: RMRR base: 0x0000007c26f000 end: 0x0000007c28efff
[    0.057590] DMAR: RMRR base: 0x0000007d800000 end: 0x0000007fffffff
[    0.057592] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.057592] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.057593] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[    0.057593] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[    0.058971] DMAR-IR: Enabled IRQ remapping in xapic mode
[    0.058972] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.062910] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.102600] TSC deadline timer enabled
[    0.102605] smpboot: CPU0: Intel(R) Core(TM) i7-6700HQ CPU @ 2.60GHz (family: 0x6, model: 0x5e, stepping: 0x3)
[    0.102608] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.102638] ... version:                4
[    0.102638] ... bit width:              48
[    0.102639] ... generic registers:      4
[    0.102639] ... value mask:             0000ffffffffffff
[    0.102640] ... max period:             00007fffffffffff
[    0.102640] ... fixed-purpose events:   3
[    0.102641] ... event mask:             000000070000000f
[    0.103417] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.103474] x86: Booting SMP configuration:
[    0.103475] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.121492] x86: Booted up 1 node, 8 CPUs
[    0.121494] smpboot: Total of 8 processors activated (41472.00 BogoMIPS)
[    0.128964] devtmpfs: initialized
[    0.129012] x86/mm: Memory block size: 128MB
[    0.130990] evm: security.selinux
[    0.130990] evm: security.SMACK64
[    0.130991] evm: security.SMACK64EXEC
[    0.130991] evm: security.SMACK64TRANSMUTE
[    0.130991] evm: security.SMACK64MMAP
[    0.130992] evm: security.ima
[    0.130992] evm: security.capability
[    0.131035] PM: Registering ACPI NVS region [mem 0x7837b000-0x7837bfff] (4096 bytes)
[    0.131037] PM: Registering ACPI NVS region [mem 0x7c9d6000-0x7ce79fff] (4866048 bytes)
[    0.131133] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.131171] pinctrl core: initialized pinctrl subsystem
[    0.131322] RTC time: 16:45:00, date: 04/25/17
[    0.131394] NET: Registered protocol family 16
[    0.144652] cpuidle: using governor ladder
[    0.160664] cpuidle: using governor menu
[    0.160666] PCCT header not found.
[    0.160722] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.160722] ACPI: bus type PCI registered
[    0.160723] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.160776] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.160777] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.160786] PCI: Using configuration type 1 for base access
[    0.176775] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    0.176775] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.176952] ACPI: Added _OSI(Module Device)
[    0.176953] ACPI: Added _OSI(Processor Device)
[    0.176953] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.176954] ACPI: Added _OSI(Processor Aggregator Device)
[    0.178124] ACPI: Executed 26 blocks of module-level executable AML code
[    0.187476] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.191260] ACPI: Dynamic OEM Table Load:
[    0.191268] ACPI: SSDT 0xFFFF964D34B5F800 0005DC (v02 PmRef  Cpu0Ist  00003000 INTL 20120913)
[    0.192095] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.193127] ACPI: Dynamic OEM Table Load:
[    0.193131] ACPI: SSDT 0xFFFF964D34B54C00 00037F (v02 PmRef  Cpu0Cst  00003001 INTL 20120913)
[    0.194442] ACPI: Dynamic OEM Table Load:
[    0.194446] ACPI: SSDT 0xFFFF964D34B5D000 0005AA (v02 PmRef  ApIst    00003000 INTL 20120913)
[    0.195515] ACPI: Dynamic OEM Table Load:
[    0.195518] ACPI: SSDT 0xFFFF964D34BC8800 000119 (v02 PmRef  ApCst    00003000 INTL 20120913)
[    0.199708] ACPI : EC: EC started
[    0.268810] ACPI: Interpreter enabled
[    0.268848] ACPI: (supports S0 S3 S4 S5)
[    0.268848] ACPI: Using IOAPIC for interrupt routing
[    0.268882] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.270908] ACPI: Power Resource [PG00] (on)
[    0.293317] ACPI: Power Resource [PG01] (on)
[    0.293667] ACPI: Power Resource [PG02] (on)
[    0.294374] ACPI: Power Resource [WRST] (off)
[    0.294688] ACPI: Power Resource [WRST] (off)
[    0.294999] ACPI: Power Resource [WRST] (off)
[    0.295309] ACPI: Power Resource [WRST] (off)
[    0.295623] ACPI: Power Resource [WRST] (off)
[    0.296052] ACPI: Power Resource [WRST] (off)
[    0.296366] ACPI: Power Resource [WRST] (off)
[    0.296678] ACPI: Power Resource [WRST] (off)
[    0.297007] ACPI: Power Resource [WRST] (off)
[    0.297322] ACPI: Power Resource [WRST] (off)
[    0.297636] ACPI: Power Resource [WRST] (off)
[    0.297946] ACPI: Power Resource [WRST] (off)
[    0.298254] ACPI: Power Resource [WRST] (off)
[    0.298564] ACPI: Power Resource [WRST] (off)
[    0.298873] ACPI: Power Resource [WRST] (off)
[    0.299184] ACPI: Power Resource [WRST] (off)
[    0.299493] ACPI: Power Resource [WRST] (off)
[    0.299805] ACPI: Power Resource [WRST] (off)
[    0.300114] ACPI: Power Resource [WRST] (off)
[    0.302002] ACPI: Power Resource [WRST] (off)
[    0.309635] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.309639] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.310858] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.310858] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.311296] PCI host bridge to bus 0000:00
[    0.311297] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.311298] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.311299] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.311300] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.311301] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.311302] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.311303] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.311303] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.311304] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.311305] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.311306] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.311307] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.311307] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.311308] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.311309] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.311310] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.311311] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[    0.311311] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.311312] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.311319] pci 0000:00:00.0: [8086:1910] type 00 class 0x060000
[    0.311414] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[    0.311448] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.311551] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.311603] pci 0000:00:02.0: [8086:191b] type 00 class 0x030000
[    0.311611] pci 0000:00:02.0: reg 0x10: [mem 0xdd000000-0xddffffff 64bit]
[    0.311616] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.311620] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.311780] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[    0.311797] pci 0000:00:14.0: reg 0x10: [mem 0xdf510000-0xdf51ffff 64bit]
[    0.311857] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.311940] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.311973] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
[    0.311989] pci 0000:00:14.2: reg 0x10: [mem 0xdf52e000-0xdf52efff 64bit]
[    0.312131] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[    0.312150] pci 0000:00:16.0: reg 0x10: [mem 0xdf52d000-0xdf52dfff 64bit]
[    0.312218] pci 0000:00:16.0: PME# supported from D3hot
[    0.312340] pci 0000:00:17.0: [8086:a103] type 00 class 0x010601
[    0.312353] pci 0000:00:17.0: reg 0x10: [mem 0xdf528000-0xdf529fff]
[    0.312359] pci 0000:00:17.0: reg 0x14: [mem 0xdf52c000-0xdf52c0ff]
[    0.312366] pci 0000:00:17.0: reg 0x18: [io  0xf090-0xf097]
[    0.312372] pci 0000:00:17.0: reg 0x1c: [io  0xf080-0xf083]
[    0.312378] pci 0000:00:17.0: reg 0x20: [io  0xf060-0xf07f]
[    0.312385] pci 0000:00:17.0: reg 0x24: [mem 0xdf52b000-0xdf52b7ff]
[    0.312421] pci 0000:00:17.0: PME# supported from D3hot
[    0.312535] pci 0000:00:1c.0: [8086:a113] type 01 class 0x060400
[    0.312589] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.312685] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.312724] pci 0000:00:1c.4: [8086:a114] type 01 class 0x060400
[    0.312781] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.312877] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.312916] pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
[    0.312971] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.313066] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.313098] pci 0000:00:1d.2: [8086:a11a] type 01 class 0x060400
[    0.313152] pci 0000:00:1d.2: PME# supported from D0 D3hot D3cold
[    0.313245] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.313274] pci 0000:00:1d.3: [8086:a11b] type 01 class 0x060400
[    0.313327] pci 0000:00:1d.3: PME# supported from D0 D3hot D3cold
[    0.313421] pci 0000:00:1d.3: System wakeup disabled by ACPI
[    0.313450] pci 0000:00:1d.4: [8086:a11c] type 01 class 0x060400
[    0.313503] pci 0000:00:1d.4: PME# supported from D0 D3hot D3cold
[    0.313599] pci 0000:00:1d.4: System wakeup disabled by ACPI
[    0.313641] pci 0000:00:1f.0: [8086:a14e] type 00 class 0x060100
[    0.313836] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[    0.313845] pci 0000:00:1f.2: reg 0x10: [mem 0xdf524000-0xdf527fff]
[    0.313982] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
[    0.314001] pci 0000:00:1f.3: reg 0x10: [mem 0xdf520000-0xdf523fff 64bit]
[    0.314024] pci 0000:00:1f.3: reg 0x20: [mem 0xdf500000-0xdf50ffff 64bit]
[    0.314068] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.314206] pci 0000:00:1f.3: System wakeup disabled by ACPI
[    0.314241] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[    0.314288] pci 0000:00:1f.4: reg 0x10: [mem 0xdf52a000-0xdf52a0ff 64bit]
[    0.314356] pci 0000:00:1f.4: reg 0x20: [io  0xf040-0xf05f]
[    0.314561] pci 0000:01:00.0: [10de:1427] type 00 class 0x030200
[    0.314569] pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
[    0.314576] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.314583] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.314588] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.314593] pci 0000:01:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
[    0.314671] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.324791] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.324792] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.324794] pci 0000:00:01.0:   bridge window [mem 0xde000000-0xdf0fffff]
[    0.324797] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.324863] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.324880] pci 0000:02:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.324904] pci 0000:02:00.0: reg 0x18: [mem 0xdf400000-0xdf400fff 64bit]
[    0.324919] pci 0000:02:00.0: reg 0x20: [mem 0xd2100000-0xd2103fff 64bit pref]
[    0.325004] pci 0000:02:00.0: supports D1 D2
[    0.325005] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.325083] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.336799] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.336801] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
[    0.336803] pci 0000:00:1c.0:   bridge window [mem 0xdf400000-0xdf4fffff]
[    0.336807] pci 0000:00:1c.0:   bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
[    0.336873] pci 0000:03:00.0: [8086:3165] type 00 class 0x028000
[    0.336904] pci 0000:03:00.0: reg 0x10: [mem 0xdf300000-0xdf301fff 64bit]
[    0.337057] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.337148] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.348811] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.348815] pci 0000:00:1c.4:   bridge window [mem 0xdf300000-0xdf3fffff]
[    0.348873] pci 0000:04:00.0: [8086:f1a5] type 00 class 0x010802
[    0.348894] pci 0000:04:00.0: reg 0x10: [mem 0xdf200000-0xdf203fff 64bit]
[    0.349065] pci 0000:04:00.0: System wakeup disabled by ACPI
[    0.360814] pci 0000:00:1d.0: PCI bridge to [bus 04]
[    0.360818] pci 0000:00:1d.0:   bridge window [mem 0xdf200000-0xdf2fffff]
[    0.360863] pci 0000:00:1d.2: PCI bridge to [bus 05]
[    0.360910] pci 0000:00:1d.3: PCI bridge to [bus 06]
[    0.360969] pci 0000:07:00.0: [1b21:1242] type 00 class 0x0c0330
[    0.360987] pci 0000:07:00.0: reg 0x10: [mem 0xdf100000-0xdf107fff 64bit]
[    0.361084] pci 0000:07:00.0: PME# supported from D3hot D3cold
[    0.361155] pci 0000:07:00.0: System wakeup disabled by ACPI
[    0.372821] pci 0000:00:1d.4: PCI bridge to [bus 07]
[    0.372825] pci 0000:00:1d.4:   bridge window [mem 0xdf100000-0xdf1fffff]
[    0.374677] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.374720] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.374761] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.374802] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.374843] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.374883] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.374924] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.374966] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.375622] ACPI: Enabled 5 GPEs in block 00 to 7F
[    0.375673] ACPI : EC: EC stopped
[    0.375748] ACPI : EC: GPE = 0x45, I/O: command/status = 0x66, data = 0x62
[    0.375749] ACPI : EC: EC started
[    0.445062] SCSI subsystem initialized
[    0.445086] libata version 3.00 loaded.
[    0.445110] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.445111] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.445113] vgaarb: loaded
[    0.445114] vgaarb: bridge control possible 0000:00:02.0
[    0.445128] ACPI: bus type USB registered
[    0.445139] usbcore: registered new interface driver usbfs
[    0.445147] usbcore: registered new interface driver hub
[    0.445161] usbcore: registered new device driver usb
[    0.448997] PCI: Using ACPI for IRQ routing
[    0.476565] PCI: pci_cache_line_size set to 64 bytes
[    0.476622] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.476623] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.476623] e820: reserve RAM buffer [mem 0x7837b000-0x7bffffff]
[    0.476624] e820: reserve RAM buffer [mem 0x7ba62000-0x7bffffff]
[    0.476625] e820: reserve RAM buffer [mem 0x7c9d6000-0x7fffffff]
[    0.476626] e820: reserve RAM buffer [mem 0x7d2ff000-0x7fffffff]
[    0.476627] e820: reserve RAM buffer [mem 0x27f000000-0x27fffffff]
[    0.476697] NetLabel: Initializing
[    0.476697] NetLabel:  domain hash size = 128
[    0.476698] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.476708] NetLabel:  unlabeled traffic allowed by default
[    0.476806] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.476810] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.478855] clocksource: Switched to clocksource hpet
[    0.484562] VFS: Disk quotas dquot_6.6.0
[    0.484574] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.484645] AppArmor: AppArmor Filesystem Enabled
[    0.484673] pnp: PnP ACPI init
[    0.484788] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.485062] pnp 00:01: Plug and Play ACPI device, IDs SYN2e01 SYN0100 SYN0002 PNP0f13 (active)
[    0.485251] system 00:02: [io  0x0680-0x069f] has been reserved
[    0.485252] system 00:02: [io  0xffff] has been reserved
[    0.485253] system 00:02: [io  0xffff] has been reserved
[    0.485254] system 00:02: [io  0xffff] has been reserved
[    0.485255] system 00:02: [io  0x1800-0x18fe] has been reserved
[    0.485256] system 00:02: [io  0x164e-0x164f] has been reserved
[    0.485258] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.485343] system 00:03: [io  0x0800-0x087f] has been reserved
[    0.485344] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.485361] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.485394] system 00:05: [io  0x1854-0x1857] has been reserved
[    0.485395] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.485551] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.485552] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.485553] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.485554] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[    0.485555] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.485556] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.485557] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.485558] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[    0.485559] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.485560] system 00:06: [mem 0xdffe0000-0xdfffffff] has been reserved
[    0.485562] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.485597] system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.485598] system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.485599] system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.485600] system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.485601] system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.485602] system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.485603] system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.485605] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.485878] system 00:08: [io  0xff00-0xfffe] has been reserved
[    0.485880] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.486913] system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved
[    0.486915] system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved
[    0.486916] system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved
[    0.486917] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.487804] pnp: PnP ACPI: found 10 devices
[    0.494579] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.494614] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.494616] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.494618] pci 0000:00:01.0:   bridge window [mem 0xde000000-0xdf0fffff]
[    0.494620] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.494623] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.494624] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
[    0.494627] pci 0000:00:1c.0:   bridge window [mem 0xdf400000-0xdf4fffff]
[    0.494629] pci 0000:00:1c.0:   bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
[    0.494633] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.494635] pci 0000:00:1c.4:   bridge window [mem 0xdf300000-0xdf3fffff]
[    0.494640] pci 0000:00:1d.0: PCI bridge to [bus 04]
[    0.494643] pci 0000:00:1d.0:   bridge window [mem 0xdf200000-0xdf2fffff]
[    0.494648] pci 0000:00:1d.2: PCI bridge to [bus 05]
[    0.494655] pci 0000:00:1d.3: PCI bridge to [bus 06]
[    0.494661] pci 0000:00:1d.4: PCI bridge to [bus 07]
[    0.494664] pci 0000:00:1d.4:   bridge window [mem 0xdf100000-0xdf1fffff]
[    0.494670] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.494671] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.494672] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.494673] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.494673] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.494674] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.494675] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.494676] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.494677] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.494678] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.494678] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.494679] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[    0.494680] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[    0.494681] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[    0.494682] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[    0.494683] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[    0.494683] pci_bus 0000:00: resource 20 [mem 0x80000000-0xdfffffff window]
[    0.494684] pci_bus 0000:00: resource 21 [mem 0xfd000000-0xfe7fffff window]
[    0.494685] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.494686] pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf0fffff]
[    0.494687] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.494688] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.494689] pci_bus 0000:02: resource 1 [mem 0xdf400000-0xdf4fffff]
[    0.494689] pci_bus 0000:02: resource 2 [mem 0xd2100000-0xd21fffff 64bit pref]
[    0.494690] pci_bus 0000:03: resource 1 [mem 0xdf300000-0xdf3fffff]
[    0.494691] pci_bus 0000:04: resource 1 [mem 0xdf200000-0xdf2fffff]
[    0.494692] pci_bus 0000:07: resource 1 [mem 0xdf100000-0xdf1fffff]
[    0.494715] NET: Registered protocol family 2
[    0.494836] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.494944] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.495076] TCP: Hash tables configured (established 65536 bind 65536)
[    0.495093] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.495115] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.495155] NET: Registered protocol family 1
[    0.495165] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.495954] pci 0000:07:00.0: enabling device (0000 -> 0002)
[    0.496040] PCI: CLS 0 bytes, default 64
[    0.496071] Unpacking initramfs...
[    1.110345] Freeing initrd memory: 45500K (ffff964af2712000 - ffff964af5381000)
[    1.110407] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.110409] software IO TLB [mem 0x7355e000-0x7755e000] (64MB) mapped at [ffff964b3355e000-ffff964b3755dfff]
[    1.110718] Scanning for low memory corruption every 60 seconds
[    1.111045] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.111071] audit: initializing netlink subsys (disabled)
[    1.111082] audit: type=2000 audit(1493138701.096:1): initialized
[    1.111449] Initialise system trusted keyrings
[    1.111547] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[    1.112823] zbud: loaded
[    1.113170] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.113346] fuse init (API version 7.25)
[    1.113458] Allocating IMA blacklist keyring.
[    1.115107] Key type asymmetric registered
[    1.115108] Asymmetric key parser 'x509' registered
[    1.115135] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    1.115170] io scheduler noop registered
[    1.115170] io scheduler deadline registered (default)
[    1.115176] io scheduler cfq registered
[    1.116249] aer 0000:00:1c.0:pcie002: service driver aer loaded
[    1.116267] aer 0000:00:1c.4:pcie002: service driver aer loaded
[    1.116289] aer 0000:00:1d.0:pcie002: service driver aer loaded
[    1.116308] aer 0000:00:1d.2:pcie002: service driver aer loaded
[    1.116328] aer 0000:00:1d.3:pcie002: service driver aer loaded
[    1.116348] aer 0000:00:1d.4:pcie002: service driver aer loaded
[    1.116363] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[    1.116364] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    1.116366] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded
[    1.116372] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    1.116373] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.116375] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
[    1.116380] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[    1.116381] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    1.116383] pcie_pme 0000:00:1c.4:pcie001: service driver pcie_pme loaded
[    1.116389] pcieport 0000:00:1d.0: Signaling PME through PCIe PME interrupt
[    1.116389] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[    1.116391] pcie_pme 0000:00:1d.0:pcie001: service driver pcie_pme loaded
[    1.116397] pcieport 0000:00:1d.2: Signaling PME through PCIe PME interrupt
[    1.116399] pcie_pme 0000:00:1d.2:pcie001: service driver pcie_pme loaded
[    1.116406] pcieport 0000:00:1d.3: Signaling PME through PCIe PME interrupt
[    1.116408] pcie_pme 0000:00:1d.3:pcie001: service driver pcie_pme loaded
[    1.116415] pcieport 0000:00:1d.4: Signaling PME through PCIe PME interrupt
[    1.116416] pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
[    1.116417] pcie_pme 0000:00:1d.4:pcie001: service driver pcie_pme loaded
[    1.116424] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.116428] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.116453] efifb: probing for efifb
[    1.116463] efifb: framebuffer at 0xb0000000, using 1920k, total 1920k
[    1.116464] efifb: mode is 800x600x32, linelength=3200, pages=1
[    1.116464] efifb: scrolling: redraw
[    1.116465] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.116528] Console: switching to colour frame buffer device 100x37
[    1.116535] fb0: EFI VGA frame buffer device
[    1.116540] intel_idle: MWAIT substates: 0x11142120
[    1.116540] intel_idle: v0.4.1 model 0x5E
[    1.116543] intel_idle: state C8-SKL is disabled
[    1.116544] intel_idle: state C9-SKL is disabled
[    1.116818] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.117731] ACPI: AC Adapter [AC0] (on-line)
[    1.117784] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    1.117787] ACPI: Sleep Button [SLPB]
[    1.117815] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    1.117823] ACPI: Lid Switch [LID1]
[    1.117849] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    1.117850] ACPI: Power Button [PWRB]
[    1.117875] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.117876] ACPI: Power Button [PWRF]
[    1.119208] thermal LNXTHERM:00: registered as thermal_zone0
[    1.119209] ACPI: Thermal Zone [ECTZ] (33 C)
[    1.119610] ACPI: Invalid active0 threshold
[    1.120348] thermal LNXTHERM:01: registered as thermal_zone1
[    1.120349] ACPI: Thermal Zone [TZ00] (33 C)
[    1.120528] thermal LNXTHERM:02: registered as thermal_zone2
[    1.120529] ACPI: Thermal Zone [TZ01] (30 C)
[    1.120555] GHES: HEST is not enabled!
[    1.120615] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.120982] ACPI: Battery Slot [BAT0] (battery absent)
[    1.122074] Linux agpgart interface v0.103
[    1.124141] loop: module loaded
[    1.124270] libphy: Fixed MDIO Bus: probed
[    1.124270] tun: Universal TUN/TAP device driver, 1.6
[    1.124271] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.124304] PPP generic driver version 2.4.2
[    1.124342] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.124344] ehci-pci: EHCI PCI platform driver
[    1.124352] ehci-platform: EHCI generic platform driver
[    1.124359] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.124360] ohci-pci: OHCI PCI platform driver
[    1.124366] ohci-platform: OHCI generic platform driver
[    1.124371] uhci_hcd: USB Universal Host Controller Interface driver
[    1.124504] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.124507] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.125585] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[    1.125589] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.125656] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.125657] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.125658] usb usb1: Product: xHCI Host Controller
[    1.125659] usb usb1: Manufacturer: Linux 4.8.0-49-generic xhci-hcd
[    1.125659] usb usb1: SerialNumber: 0000:00:14.0
[    1.125740] hub 1-0:1.0: USB hub found
[    1.125755] hub 1-0:1.0: 16 ports detected
[    1.138308] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.138310] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.138332] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    1.138333] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.138334] usb usb2: Product: xHCI Host Controller
[    1.138335] usb usb2: Manufacturer: Linux 4.8.0-49-generic xhci-hcd
[    1.138336] usb usb2: SerialNumber: 0000:00:14.0
[    1.138445] hub 2-0:1.0: USB hub found
[    1.138455] hub 2-0:1.0: 8 ports detected
[    1.141427] usb: port power management may be unreliable
[    1.144536] xhci_hcd 0000:07:00.0: xHCI Host Controller
[    1.144539] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 3
[    1.204426] xhci_hcd 0000:07:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x00000010
[    1.204575] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.204576] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.204576] usb usb3: Product: xHCI Host Controller
[    1.204577] usb usb3: Manufacturer: Linux 4.8.0-49-generic xhci-hcd
[    1.204578] usb usb3: SerialNumber: 0000:07:00.0
[    1.204700] hub 3-0:1.0: USB hub found
[    1.204705] hub 3-0:1.0: 2 ports detected
[    1.204916] xhci_hcd 0000:07:00.0: xHCI Host Controller
[    1.204918] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 4
[    1.205235] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.205245] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.205246] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.205246] usb usb4: Product: xHCI Host Controller
[    1.205247] usb usb4: Manufacturer: Linux 4.8.0-49-generic xhci-hcd
[    1.205248] usb usb4: SerialNumber: 0000:07:00.0
[    1.205362] hub 4-0:1.0: USB hub found
[    1.205367] hub 4-0:1.0: 2 ports detected
[    1.205595] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:SYN1] at 0x60,0x64 irq 1,12
[    1.216259] i8042: Detected active multiplexing controller, rev 1.1
[    1.222740] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.222743] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.222766] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.222786] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.222805] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.222992] mousedev: PS/2 mouse device common for all mice
[    1.223335] rtc_cmos 00:04: RTC can wake from S4
[    1.223716] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    1.223795] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.223799] i2c /dev entries driver
[    1.223836] device-mapper: uevent: version 1.0.3
[    1.223897] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[    1.223899] intel_pstate: Intel P-state driver initializing
[    1.224652] intel_pstate: HWP enabled
[    1.225193] ledtrig-cpu: registered to indicate activity on CPUs
[    1.225194] EFI Variables Facility v0.08 2004-May-17
[    1.230053] NET: Registered protocol family 10
[    1.230288] NET: Registered protocol family 17
[    1.230292] Key type dns_resolver registered
[    1.230614] microcode: sig=0x506e3, pf=0x20, revision=0x7c
[    1.230900] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.231359] registered taskstats version 1
[    1.231362] Loading compiled-in X.509 certificates
[    1.231598] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.233850] Loaded X.509 cert 'Build time autogenerated kernel key: 2dfbf108cf5cc1a4cb9675099e53cc52c1ef4808'
[    1.233863] zswap: loaded using pool lzo/zbud
[    1.244546] Key type big_key registered
[    1.246258] Key type trusted registered
[    1.247885] Key type encrypted registered
[    1.247888] AppArmor: AppArmor sha1 policy hashing enabled
[    1.247889] ima: No TPM chip found, activating TPM-bypass!
[    1.247901] evm: HMAC attrs: 0x1
[    1.248972]   Magic number: 13:798:793
[    1.249204] rtc_cmos 00:04: setting system clock to 2017-04-25 16:45:01 UTC (1493138701)
[    1.249386] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.249386] EDD information not available.
[    1.249423] PM: Hibernation image not present or could not be loaded.
[    1.250272] Freeing unused kernel memory: 1548K (ffffffffbe76a000 - ffffffffbe8ed000)
[    1.250273] Write protecting the kernel read-only data: 14336k
[    1.250691] Freeing unused kernel memory: 1396K (ffff964ad66a3000 - ffff964ad6800000)
[    1.250859] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[    1.250860] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[    1.251320] Freeing unused kernel memory: 260K (ffff964ad6bbf000 - ffff964ad6c00000)
[    1.256110] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.263532] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.263576] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.263582] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.263887] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.263904] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.264853] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.264881] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.264907] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.264933] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.264940] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.288947] hidraw: raw HID events driver (C) Jiri Kosina
[    1.292338] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[    1.307296] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.307301] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.308064] [drm] Initialized drm 1.1.0 20060810
[    1.308068] ahci 0000:00:17.0: version 3.0
[    1.308278] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x2 impl SATA mode
[    1.308280] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
[    1.308610] scsi host0: ahci
[    1.308722] scsi host1: ahci
[    1.308766] ata1: DUMMY
[    1.308769] ata2: SATA max UDMA/133 abar m2048@0xdf52b000 port 0xdf52b180 irq 138
[    1.309685] nvme nvme0: pci function 0000:04:00.0
[    1.317065] nvidia: loading out-of-tree module taints kernel.
[    1.317069] nvidia: module license 'NVIDIA' taints kernel.
[    1.317070] Disabling lock debugging due to kernel taint
[    1.321119] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[    1.323831] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xffffc29a8002c000, b0:25:aa:1e:a4:1d, XID 0c000800 IRQ 140
[    1.323832] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.324403] nvidia 0000:01:00.0: enabling device (0006 -> 0007)
[    1.324576] nvidia-nvlink: Nvlink Core is being initialized, major device number 244
[    1.324585] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  375.39  Tue Jan 31 20:47:00 PST 2017 (using threaded interrupts)
[    1.325629] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  375.39  Tue Jan 31 19:41:48 PST 2017
[    1.326710] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[    1.330993] [drm] Memory usable by graphics device = 4096M
[    1.330996] checking generic (b0000000 1e0000) vs hw (b0000000 10000000)
[    1.330997] fb: switching to inteldrmfb from EFI VGA
[    1.331042] Console: switching to colour dummy device 80x25
[    1.331118] [drm] Replacing VGA console driver
[    1.337026] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.337027] [drm] Driver supports precise vblank timestamp query.
[    1.340471] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    1.343351] [drm] Finished loading i915/skl_dmc_ver1_26.bin (v1.26)
[    1.351172] [drm] GuC firmware load skipped
[    1.356653] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.356866] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[    1.356966] ACPI: Video Device [PEGP] (multi-head: no  rom: yes  post: no)
[    1.357006] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:11/LNXVIDEO:01/input/input8
[    1.357113] [drm] Initialized i915 1.6.0 20160711 for 0000:00:02.0 on minor 1
[    1.359641] fbcon: inteldrmfb (fb0) is primary device
[    1.359685] Console: switching to colour frame buffer device 240x67
[    1.359701] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    1.452959] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[    1.452960] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[    1.462979] usb 1-4: new high-speed USB device number 2 using xhci_hcd
[    1.525727]  nvme0n1: p1 p2 p3
[    1.623411] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.625062] ata2.00: supports DRM functions and may not be fully accessible
[    1.625694] ata2.00: NCQ Send/Recv Log not supported
[    1.625696] ata2.00: ATA-9: Samsung SSD 850 EVO 120GB, EMT01B6Q, max UDMA/133
[    1.625697] ata2.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    1.626379] ata2.00: supports DRM functions and may not be fully accessible
[    1.626902] ata2.00: NCQ Send/Recv Log not supported
[    1.627181] ata2.00: configured for UDMA/133
[    1.627743] scsi 1:0:0:0: Direct-Access     ATA      Samsung SSD 850  1B6Q PQ: 0 ANSI: 5
[    1.640025] usb 1-4: New USB device found, idVendor=5986, idProduct=069e
[    1.640026] usb 1-4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    1.640027] usb 1-4: Product: HD Webcam
[    1.640028] usb 1-4: Manufacturer: Generic
[    1.640028] usb 1-4: SerialNumber: 200901010001
[    1.656968] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[    1.656969] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[    1.671269] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    1.671295] sd 1:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    1.671696] sd 1:0:0:0: [sda] Write Protect is off
[    1.671697] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.671859] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.674521]  sda: sda1
[    1.675105] sd 1:0:0:0: [sda] Attached SCSI disk
[    1.705265] random: fast init done
[    1.715666] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
[    1.762924] usb 1-6: new full-speed USB device number 3 using xhci_hcd
[    1.818286] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    1.818416] systemd[1]: Detected architecture x86-64.
[    1.818610] systemd[1]: Set hostname to <metin-monster>.
[    1.861031] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[    1.861032] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[    1.867207] systemd[1]: Listening on udev Control Socket.
[    1.867275] systemd[1]: Listening on Syslog Socket.
[    1.867310] systemd[1]: Reached target User and Group Name Lookups.
[    1.867355] systemd[1]: Listening on Journal Socket.
[    1.867401] systemd[1]: Listening on Journal Socket (/dev/log).
[    1.867449] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    1.867511] systemd[1]: Listening on Journal Audit Socket.
[    1.908131] usb 1-6: New USB device found, idVendor=8087, idProduct=0a2a
[    1.908132] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.919023] lp: driver loaded but no devices found
[    1.921141] ppdev: user-space parallel port driver
[    1.962099] EXT4-fs (nvme0n1p2): re-mounted. Opts: errors=remount-ro
[    1.967884] systemd-journald[286]: Received request to flush runtime journal from PID 1
[    2.013003] tpm_crb MSFT0101:00: can't request region for resource [mem 0xfed40080-0xfed40fff]
[    2.013010] tpm_crb: probe of MSFT0101:00 failed with error -16
[    2.017355] wmi: Mapper loaded
[    2.022795] Bluetooth: Core ver 2.21
[    2.022804] NET: Registered protocol family 31
[    2.022805] Bluetooth: HCI device and connection manager initialized
[    2.022807] Bluetooth: HCI socket layer initialized
[    2.022808] Bluetooth: L2CAP socket layer initialized
[    2.022811] Bluetooth: SCO socket layer initialized
[    2.034877] usb 1-9: new full-speed USB device number 4 using xhci_hcd
[    2.039169] Bluetooth: HCI UART driver ver 2.3
[    2.039170] Bluetooth: HCI UART protocol H4 registered
[    2.039170] Bluetooth: HCI UART protocol BCSP registered
[    2.039170] Bluetooth: HCI UART protocol LL registered
[    2.039171] Bluetooth: HCI UART protocol ATH3K registered
[    2.039171] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    2.039191] Bluetooth: HCI UART protocol Intel registered
[    2.039213] Bluetooth: HCI UART protocol BCM registered
[    2.039214] Bluetooth: HCI UART protocol QCA registered
[    2.039214] Bluetooth: HCI UART protocol AG6XX registered
[    2.046617] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.049649] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    2.078319] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[    2.078320] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[    2.080152] Intel(R) Wireless WiFi driver for Linux
[    2.080153] Copyright(c) 2003- 2015 Intel Corporation
[    2.080202] iwlwifi 0000:03:00.0: enabling device (0000 -> 0002)
[    2.081888] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    2.081889] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    2.081890] RAPL PMU: hw unit of domain package 2^-14 Joules
[    2.081891] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    2.081891] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    2.081892] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    2.085962] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7265D-24.ucode failed with error -2
[    2.085980] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7265D-23.ucode failed with error -2
[    2.091063] iwlwifi 0000:03:00.0: loaded firmware version 22.361476.0 op_mode iwlmvm
[    2.103392] AVX2 version of gcm_enc/dec engaged.
[    2.103394] AES CTR mode by8 optimization enabled
[    2.106318] random: crng init done
[    2.126891] tsc: Refined TSC clocksource calibration: 2592.000 MHz
[    2.126901] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x255cb6cc5db, max_idle_ns: 440795203504 ns
[    2.130881] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 3165, REV=0x210
[    2.132953] iwlwifi 0000:03:00.0: L1 Disabled - LTR Enabled
[    2.133134] iwlwifi 0000:03:00.0: L1 Disabled - LTR Enabled
[    2.142403] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    2.153268] nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 241
[    2.179196] usb 1-9: New USB device found, idVendor=046d, idProduct=c52f
[    2.179198] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.179199] usb 1-9: Product: USB Receiver
[    2.179200] usb 1-9: Manufacturer: Logitech
[    2.183161] intel_rapl: Found RAPL domain package
[    2.183163] intel_rapl: Found RAPL domain core
[    2.183164] intel_rapl: Found RAPL domain uncore
[    2.183166] intel_rapl: Found RAPL domain dram
[    2.196613] asus_wmi: Asus Management GUID not found
[    2.207992] usbcore: registered new interface driver btusb
[    2.213277] media: Linux media interface: v0.10
[    2.214663] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    2.216009] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[    2.218609] Linux video capture interface: v2.00
[    2.222538] Bluetooth: hci0: read Intel version: 370810011003110e00
[    2.224134] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[    2.225513] Adding 7812092k swap on /dev/nvme0n1p3.  Priority:-1 extents:1 across:7812092k SSFS
[    2.249699] usbcore: registered new interface driver usbhid
[    2.249700] usbhid: USB HID core driver
[    2.252976] uvcvideo: Found UVC 1.00 device HD Webcam (5986:069e)
[    2.255399] uvcvideo 1-4:1.0: Entity type for entity Realtek Extended Controls Unit was not initialized!
[    2.255401] uvcvideo 1-4:1.0: Entity type for entity Extension 4 was not initialized!
[    2.255402] uvcvideo 1-4:1.0: Entity type for entity Processing 2 was not initialized!
[    2.255409] uvcvideo 1-4:1.0: Entity type for entity Camera 1 was not initialized!
[    2.255480] input: HD Webcam as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input13
[    2.255654] usbcore: registered new interface driver uvcvideo
[    2.255655] USB Video Class driver (1.1.1)
[    2.263491] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/0003:046D:C52F.0001/input/input14
[    2.263679] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-9/input0
[    2.264325] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.1/0003:046D:C52F.0002/input/input15
[    2.280798] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
[    2.280799] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[    2.327212] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-9/input1
[    2.510706] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[    2.795218] [drm] RC6 on
[    3.131143] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    3.147177] clocksource: Switched to clocksource tsc
[    3.156909] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=2 (0x14/0x17/0x0/0x0/0x0) type:speaker
[    3.156910] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.156911] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[    3.156912] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    3.156912] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    3.156913] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[    3.156914] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    3.171249] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[    3.171362] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[    3.171526] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[    3.171606] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[    3.171709] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
[    3.260077] audit: type=1400 audit(1493138703.506:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=796 comm="apparmor_parser"
[    3.260082] audit: type=1400 audit(1493138703.506:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=796 comm="apparmor_parser"
[    3.260296] audit: type=1400 audit(1493138703.506:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=797 comm="apparmor_parser"
[    3.260802] audit: type=1400 audit(1493138703.506:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=792 comm="apparmor_parser"
[    3.260806] audit: type=1400 audit(1493138703.506:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=792 comm="apparmor_parser"
[    3.260822] audit: type=1400 audit(1493138703.506:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=792 comm="apparmor_parser"
[    3.260825] audit: type=1400 audit(1493138703.506:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=792 comm="apparmor_parser"
[    3.261664] audit: type=1400 audit(1493138703.506:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=801 comm="apparmor_parser"
[    3.261774] audit: type=1400 audit(1493138703.506:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=791 comm="apparmor_parser"
[    3.354779] bbswitch: version 0.8
[    3.354782] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[    3.354787] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
[    3.354794] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)
[    3.355038] bbswitch: detected an Optimus _DSM function
[    3.355045] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[    3.362600] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)
[    3.362660] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)
[    3.362698] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)
[    3.362734] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)
[    3.362770] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)
[    3.362822] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)
[    3.366948] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)
[    3.372034] psmouse serio4: synaptics: queried max coordinates: x [..5672], y [..4722]
[    3.379432] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    3.379433] Bluetooth: BNEP filters: protocol multicast
[    3.379437] Bluetooth: BNEP socket layer initialized
[    3.411731] psmouse serio4: synaptics: queried min coordinates: x [1380..], y [1192..]
[    3.442890] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)
[    3.465926] ahci 0000:00:17.0: port does not support device sleep
[    3.481359] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    3.482887] iwlwifi 0000:03:00.0: L1 Disabled - LTR Enabled
[    3.483042] iwlwifi 0000:03:00.0: L1 Disabled - LTR Enabled
[    3.546917] iwlwifi 0000:03:00.0: L1 Disabled - LTR Enabled
[    3.547084] iwlwifi 0000:03:00.0: L1 Disabled - LTR Enabled
[    3.560867] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    3.564450] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[    3.595686] psmouse serio4: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x126800/0x0, board id: 2942, fw id: 1524475
[    3.609414] r8169 0000:02:00.0 enp2s0: link down
[    3.609461] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[    3.645124] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input17
[    3.909128] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)
[    3.913881] nvidia-uvm: Unloaded the UVM driver in 8 mode
[    3.940110] [drm] [nvidia-drm] [GPU ID 0x00000100] Unloading driver
[    3.945485] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    3.960260] nvidia-modeset: Unloading
[    3.989949] nvidia-nvlink: Unregistered the Nvlink Core, major device number 244
[    4.323136] bbswitch: disabling discrete graphics
[    4.323154] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)
[    6.281700] Bluetooth: RFCOMM TTY layer initialized
[    6.281707] Bluetooth: RFCOMM socket layer initialized
[    6.281715] Bluetooth: RFCOMM ver 1.11
[   70.627095] usb 1-7: new high-speed USB device number 5 using xhci_hcd
[   70.787568] usb 1-7: New USB device found, idVendor=0480, idProduct=a004
[   70.787572] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   70.787575] usb 1-7: Product: External USB HDD
[   70.787578] usb 1-7: Manufacturer: Toshiba
[   70.787580] usb 1-7: SerialNumber: 20110713543D
[   70.860324] usb-storage 1-7:1.0: USB Mass Storage device detected
[   70.860388] scsi host2: usb-storage 1-7:1.0
[   70.860462] usbcore: registered new interface driver usb-storage
[   70.862216] usbcore: registered new interface driver uas
[   74.352834] scsi 2:0:0:0: Direct-Access     Toshiba  External USB HDD      PQ: 0 ANSI: 4
[   74.354287] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[   74.354986] sd 2:0:0:0: Attached scsi generic sg1 type 0
[   74.361119] sd 2:0:0:0: [sdb] Write Protect is off
[   74.361125] sd 2:0:0:0: [sdb] Mode Sense: 38 00 00 00
[   74.367997] sd 2:0:0:0: [sdb] No Caching mode page found
[   74.368006] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[   74.414529]  sdb: sdb1
[   74.434129] sd 2:0:0:0: [sdb] Attached SCSI disk
[   77.191229] usb 1-7: reset high-speed USB device number 5 using xhci_hcd
[  132.850939] wlp3s0: authenticate with 1c:b7:2c:5a:54:cf
[  132.856067] wlp3s0: send auth to 1c:b7:2c:5a:54:cf (try 1/3)
[  132.857954] wlp3s0: authenticated
[  132.858923] wlp3s0: associate with 1c:b7:2c:5a:54:cf (try 1/3)
[  132.864250] wlp3s0: RX AssocResp from 1c:b7:2c:5a:54:cf (capab=0x411 status=0 aid=1)
[  132.865300] wlp3s0: associated
[  132.865330] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[  132.921270] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 1c:b7:2c:5a:54:cf

mendirec

[mention=623979]@metimkhrmn7[/mention] Söylemeden önce kapalı mıydı? Çıktılara bakalım mı?
lspci -nnk | egrep "VGA|3D|Display" -A2
glxinfo | grep render
dpkg -l | egrep "nvidia|bumblebee|nvidia-prime|fglrx"

metimkhrmn7

Evet kapalıydı çıkları vereyim ben tekrar teşekkürler
lspci -nnk | egrep "VGA|3D|Display" -A2

00:02.0 VGA compatible controller [0300]: Intel Corporation Skylake Integrated Graphics [8086:191b] (rev 06)
DeviceName:  Onboard IGD
Subsystem: Device [1d05:1019]
--
01:00.0 3D controller [0302]: NVIDIA Corporation GM206M [GeForce GTX 965M] [10de:1427] (rev a1)
Subsystem: Device [1d05:1019]
Kernel modules: nvidiafb, nouveau, nvidia_375_drm, nvidia_375

glxinfo | grep render

direct rendering: Yes
    GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer,
    GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer,
Extended renderer info (GLX_MESA_query_renderer):
OpenGL renderer string: Mesa DRI Intel(R) HD Graphics 530 (Skylake GT2)
    GL_ARB_conditional_render_inverted, GL_ARB_conservative_depth,
    GL_MESA_texture_signed_rgba, GL_NV_conditional_render, GL_NV_depth_clamp,
    GL_ARB_compute_shader, GL_ARB_conditional_render_inverted,
    GL_NV_conditional_render, GL_NV_depth_clamp, GL_NV_light_max_exponent,
    GL_OES_element_index_uint, GL_OES_fbo_render_mipmap,

dpkg -l | egrep "nvidia|bumblebee|nvidia-prime|fglrx"

ii  nvidia-375                                 375.39-0ubuntu0.16.04.1                       amd64        NVIDIA binary driver - version 375.39
ii  nvidia-opencl-icd-375                      375.39-0ubuntu0.16.04.1                       amd64        NVIDIA OpenCL ICD
ii  nvidia-prime                               0.8.2                                         amd64        Tools to enable NVIDIA's Prime
ii  nvidia-settings                            361.42-0ubuntu1                               amd64        Tool for configuring the NVIDIA graphics driver



mendirec

Nvidia-Settings üzerinden kartlar arasında geçiş yapabiliyor musun?

Moto G cihazımdan Tapatalk kullanılarak gönderildi


metimkhrmn7

#14
evet performansını test etmedim ama sistem detaylarında geçiş yapılan kartı görüyorum ama nvidia ya geçiş yaptığımda pc yi yeniden başlatmam gerekiyor oturum açıp kapatma ile geçiş yapamıyorum