Ubuntu Açılırken Siyah Ekran Sorunu

Başlatan lawubuntu, 05 Mayıs 2013 - 13:03:56

« önceki - sonraki »

0 Üyeler ve 2 Ziyaretçi konuyu incelemekte.

lawubuntu

Sırayla gidersek;
10 gün kadar önce Win7'nin yanına Ubuntu 12.04 kurdum. Açılışta sorun yoktu, sadece masaüstünde, en yukarıdaki siyah çubuğun altında 5-6 adet yatay olarak renkli çizgiler çıkmıştı. Her açılışta farklı renklerde çıkıyordu. Yeni olduğumdan umursamamıştım ancak bir kaç gün önce açılırken ubuntu logosu küçük görünmeye ve beyaz bir ekran gelip öyle açılmaya başlayınca dün bunun çözümü var mı diye baktım. Şunu buldum:

http://forum.ubuntu-tr.net/index.php?topic=38975.0

@goupx şöyle demiş;
Alıntı Yapwget http://launchpadlibrarian.net/121675171/fixplymouth
chmod +x fixplymouth
./fixplymouth


Sudo şifrenizi girip biraz bekleyin sonra uçbirimde bir liste çıkacak, o listeden en yüksek çözünürlüğü seçeceksiniz. (bende 1024x768-24 vardı sizde de büyük ihtimalle aynıdır galiba daha fazlası desteklenmiyor) satıra 1024x768-24 yazıp enter'a basın iş bittikten sonra yeniden başlatabilirsiniz.

Bu adımı uyguladım, 1024x786-16 yaptım ben. 16 bit diye hatırlıyordum, hala da nedir bilmiyorum. Win7'de 1280x800 çözünürlükte kullanıyorum.
Bu işlemden sonra ise açılırken güzelce Ubuntu yazısı geldi, noktalar ilerledi ancak tam açılacakken tamamen siyah bir ekran geldi. Kaç kere tekrar başlatsam da gitmedi ve hala da öyle duruyor.

İnternette şöyle çözüm önermişler:
http://askubuntu.com/questions/162075/my-computer-boots-to-a-black-screen-what-options-do-i-have-to-fix-it
Buradaki gibi Grub ekranındayken "e" ye bastım, şöyle bir şey çıktı:

Resmin gerçek boyutu için doğrudan bağlantı linki: http://n1305.hizliresim.com/19/5/ms8zd.jpg

Malesef resim kalitesi kötü şuan elimden bu geliyor. Resimde "mode_option:1024x768_16" yazıyor. "ro" dan sonra da "quiet splah nomodeset" yazıyor. Yukarıda linkini verdiğim askubuntu'da anladığım kadarıyla bişeyler yapmaya çalıştım. "quiet splash" yazısını silip CTRL + X yaptım. "nomodeset" ile "$vt_handoff" arasındaki tüm yeri silip CTRL + X yaptım. "mode_option:800x600_16", "mode_option:800x600_8" vs. gibi diğer çözünürlükleri yazıp CTRL + X de yaptım ancak hiçbiri çözüm olmadı.

Araştırmaya devam ederken şu konuyu buldum:
http://forum.ubuntu-tr.net/index.php?topic=33596.0

@zeitgeist şu kodları vermiş, bunları yazıp baktım:
sudo fdisk -l
cat /etc/fstab
sudo blkid


Sonucunda şu sonuçlar çıktı(resim yine maalesef kötü, resimlerdekileri açıklayacağım) :

Resmin gerçek boyutu için doğrudan linki: http://j1305.hizliresim.com/19/5/ms9dp.jpg

Yukarıdaki @zeitgeist'in çözüm sunduğu linkte bir uyuşmazlıktan bahsediliyor ancak fotoğrafta da dikkatlli bakınca bir uyuşmazlık yok duruyor. Sadece "bölümleme tablosu girdileri diskteki sırasında değil." demiş. Anlamını bilmiyorum ama görünmüyorsa diye yazmak istedim.
Linux "sda6"da kurulu. "cat /etc/fstab" komutunu verinceki sda6 UUID'de yazan ile, "sudo blkid" komutundaki "sda6" UUİD'si aynı. Ancak "cat /etc/fstab" komutunda sda 6 UUID'nin yan tarafında bir de "ext4 errors=remount-ro" yazmaktadır.
Yani kısaca, ben bir uyumsuzluk göremediğimden sudo gedit /etc/fstab komutu ile düzeltme yoluna gitmedim.

Biraz uzun oldu farkındayım ancak elimdeki bütün bilgileri vermek istedim sorunun çözümü açısından.
Bilgisayarım LG R405-ACPART.
Cevap yazacaklara şimdiden teşekkür ederim.. :)
An it harm none, do what ye will.

guopx

#1
Şimdi madem bu sorun o betiği çalıştırınca oluştu o zaman betiğin tüm yaptıklarını geri alalım
sudo nano /etc/default/grub ile açılan dosyada GRUB_CMDLINE_LINUX_DEFAULT= satırını bul karşısındaki her şeyi sil ve "quiet splash" ekle yani şöyle olsun GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
Sonra aynı belgede GRUB_GFXMODE=640x480 satırının başına kare koy #GRUB_GFXMODE=640x480 gibi olsun
yap CTRL+O ve enter ile kaydet CTRL+X ile çık
sonra sudo nano /etc/initramfs-tools/modules dosyasında # ile başlamayan tüm satırları sil yine CTRL+O ve CTRL+X
en son sudo nano /etc/initramfs-tools/conf.d/splash Dosyasından  FRAMEBUFFER=y satırını sil ve CTRL+O CTRL+X ile kaydet
sudo update-grub2
sudo update-initramfs -u

yapıp sudo reboot ile yeniden başlat
Sevdiklerine sevdiğini söyle çok geç olmadan.

lawubuntu

#2
Malesef hepsinde aynı şeyi söyledi, salt okunur diyor, değişiklik yapmama izin vermiyor.
Bilgisayar açılırken "kurtarma kipi"ni tıklıyorum, orada bazı seçenekler çıkıyor. Yetkili Kullanıcı Komut Satırına Gir diyor. Oradan uçbirime ulaşmış oluyorum ancak bu komutları vermeme rağmen değişiklik yaptırmadı. "Sudo" da yazmıştım sizin yazdığınız gibi ama benden şifre girmemi de hiç istemedi.
An it harm none, do what ye will.

guopx

#3
Verdiğim komutları vermeden önce komut satırına
mount -o rw,remount / ya da sudo mount -o rw,remount / komutlarını girdikten sonra dener misiniz? Hala salt okunur diyor mu?


Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 05 Mayıs 2013 - 15:52:23

Demin kendim denedim mount -o rw,remount /bende işe yaramadı. Ama şu komut çalışıyor mount -o remount, rw / deneyin yazma izni verecektir. Sonra bir önceki iletide verilenleri tekrar yapın.
Sevdiklerine sevdiğini söyle çok geç olmadan.

lawubuntu

Alıntı yapılan: guopx - 05 Mayıs 2013 - 15:23:12
Verdiğim komutları vermeden önce komut satırına
mount -o rw,remount / ya da sudo mount -o rw,remount / komutlarını girdikten sonra dener misiniz? Hala salt okunur diyor mu?

Bu komutu yaptım ve işe yaradı. Şuan Ubuntudan yazıyorum. Çok teşekkür ederim bir an hiç giremeyeceğim sandım, acemilik de olunca insan panik oluyor böyle :)
Tekrar çok teşekkürler...

Masaüstündeki çizgilerle yaşamaya devam edeceğim sanırım, ubuntuya hiç girememekten iyidir :)
An it harm none, do what ye will.

guopx

Ubuntu yüklendikten sonra çizgiler oluşmaya devam ediyor mu masaüstünde? Ekran görüntüsü atabilir misiniz?
Sevdiklerine sevdiğini söyle çok geç olmadan.

lawubuntu

Evet devam ediyor. Bir de win7 ile beraber kurulu olduğundan shift'e basmasam da grub safası geliyor bilgisayarı açtığımda ve siyah ekran hatası alırken grub ubuntunun mor rengindeydi yukarıda resimde de var. Ancak eskiye dönünce yine siyah font üzerine grub sayfası geliyor ve masaüstünde çizgiler devam ediyor.
Buyrun masaüstüm, görüntü böyle, üst kısımda mavi çizgiler görünüyor:
An it harm none, do what ye will.

guopx

Ekran kartı sorunu gibi görünüyor şu çıktıları verebilir misiniz? http://forum.ubuntu-tr.net/index.php?topic=33412.0
Hangi sürücüyü kullanıyosunuz? ek sürücülerden sürücü kurdunuz mu hiç?
Sevdiklerine sevdiğini söyle çok geç olmadan.

if

Görsel Eğitim / Yardım (Lütfen burada soru sormayın)

lawubuntu

Alıntı yapılan: guopx - 05 Mayıs 2013 - 16:48:17
Ekran kartı sorunu gibi görünüyor şu çıktıları verebilir misiniz? http://forum.ubuntu-tr.net/index.php?topic=33412.0
Hangi sürücüyü kullanıyosunuz? ek sürücülerden sürücü kurdunuz mu hiç?

Verdiğiniz linkteki komutları girdim sonuç şöyle:

lspci | grep VGA    komutu sonucu:

01:05.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Radeon Xpress 1250
glxinfo | grep render komutu:


'glxinfo' programı şu anda kurulu değil.  Kurulumunu şunu yazarak yapabilirsiniz:
sudo apt-get install mesa-utils



lspci   komutu sonucu:

00:00.0 Host bridge: Advanced Micro Devices [AMD] nee ATI Radeon Xpress 7930 Host Bridge
00:01.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RS7932 PCI Bridge
00:04.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI Device 7934
00:06.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RS7936 PCI Bridge
00:07.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI Device 7937
00:12.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB600 Non-Raid-5 SATA
00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI0)
00:13.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI1)
00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI2)
00:13.3 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI3)
00:13.4 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI4)
00:13.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB Controller (EHCI)
00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 14)
00:14.1 IDE interface: Advanced Micro Devices [AMD] nee ATI SB600 IDE
00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB600 PCI to LPC Bridge
00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge
01:05.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Radeon Xpress 1250
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8039 PCI-E Fast Ethernet Controller (rev 15)
08:00.0 Ethernet controller: Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) (rev 01)



/usr/lib/nux/unity_support_test -p    komutu sonucu:


OpenGL vendor string:   X.Org R300 Project
OpenGL renderer string: Gallium 0.4 on ATI RS600
OpenGL version string:  2.1 Mesa 9.0.3

Not software rendered:    yes
Not blacklisted:          yes
GLX fbconfig:             yes
GLX texture from pixmap:  yes
GL npot or rect textures: yes
GL vertex program:        yes
GL fragment program:      yes
GL vertex buffer object:  yes
GL framebuffer object:    yes
GL version is 1.4+:       yes

Unity 3D supported:       yes


/usr/lib/nux/unity_support_test -p --compiz    komutu sonucu:

OpenGL vendor string:   X.Org R300 Project
OpenGL renderer string: Gallium 0.4 on ATI RS600
OpenGL version string:  2.1 Mesa 9.0.3

Not software rendered:    yes
Not blacklisted:          yes
GLX fbconfig:             yes
GLX texture from pixmap:  yes
GL npot or rect textures: yes

Compiz supported:         yes



jockey-text --list   komutu sonucunda hiçbir şey çıkmadı.


xrandr   komutu sonucu:

Screen 0: minimum 320 x 200, current 1280 x 800, maximum 8192 x 8192
VGA-0 disconnected (normal left inverted right x axis y axis)
LVDS connected 1280x800+0+0 (normal left inverted right x axis y axis) 304mm x 190mm
   1280x800       59.9*+
   1280x720       59.9 
   1152x768       59.8 
   1024x768       59.9 
   800x600        59.9 
   848x480        59.7 
   720x480        59.7 
   640x480        59.4 
S-video disconnected (normal left inverted right x axis y axis)


@if, verdiğiniz bölümde "soru sormayınız" diye belirtilmiş, o yüzden konuyu oraya açmadım. Sizin de gördüğünüz gibi oradaki bir konunun altında soru sormuştum ancak derdimi daha iyi anlatabilmek için yeni bir konu açma gereği hissettim. Aradığım cevabı orada bulamadım. Yani oraya işaret ederek neyi kastettiğinizi anlamadım. Oradan mı devam etmeliydim? Orada da bu konunun linkini vermişsiniz. Ayrıca soru sorulmaması gerekmesine rağmen o konu soru içerikli açılmış ve yürümüş. Acemi olduğumdan bir şeyleri yanlış mı yaptım bilmiyorum ama neyi kastettiğinizi anlamadığımdan buradan devam ettim şimdi.
An it harm none, do what ye will.

lawubuntu

An it harm none, do what ye will.

altandal

Bende de benzer sorun var.Yeniden başlattığımda 2 nci yada 3 ncü seferde açılıyor.Uğraşçak zamanım olmadığı için şimdilik idare ediyorum.Verdiğiniz bilgiler için teşekkür ederim.

heartsmagic

@lawubuntu, grafik kartın sanırım X serisi gerçi pek emin değilim Xpress'ler farklı bir seri de olabilir. Eğer güncel sürücü desteği varsa ATI sürücülerini kurabilirsin. Bu konuda ATI'nin sitesinden, Wiki'sinden yararlanabilirsin.

Bu mavi çizgiler misafir oturumunda da oluyor mu? Son zamanlarda yeni tema falan yükledin mi?
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?


Böylece yalan, dünyanın düzenine dönüştürülüyor.

lawubuntu

Alıntı yapılan: heartsmagic - 09 Mayıs 2013 - 12:22:30
@lawubuntu, grafik kartın sanırım X serisi gerçi pek emin değilim Xpress'ler farklı bir seri de olabilir. Eğer güncel sürücü desteği varsa ATI sürücülerini kurabilirsin. Bu konuda ATI'nin sitesinden, Wiki'sinden yararlanabilirsin.

Bu mavi çizgiler misafir oturumunda da oluyor mu? Son zamanlarda yeni tema falan yükledin mi?

Çizgiler misafir oturumunda da oluyor. Yeni tema yüklemedim sadece masaüstü resmini değiştirdim ancak zaten ubuntuyu kurduğum andan itibaren var olan bir durum bu, sonradan ortaya çıkmış bir şey değil. ATI sitelerine de bakayım teşekkürler..
An it harm none, do what ye will.

if


lawubuntu

#15
Alıntı yapılan: if - 29 Mayıs 2013 - 18:34:58
Bilgisayarın marka ve modeli nedir?

Bilgisayar LG, Modeli R405-A.C2IET
Yani LG R405-A.C2IET diye geçiyor..
Sanırım şurası da ürünün resmi destek sayfası: http://www.lg.com/tr/urun-destegi/lg-R405-A.C2IET
Ayrıca belirtmek isterim ki, "SuperTux" oyununu yükledim. Oyunu açınca ekran ayarını 800x600(4:3) olarakayarlıyor oyundan çıktığımda da bu haliyle kalıyor. ekran ayarlarından tekrar düzeltmem gerekiyor. Ayrıca oyunu durduğumda da ekranda bir çok oynama titreşme normal olmayan bir hareketlilik oluyor.
Ayrıca benim bilgisayar açılırkenki "grub" siyah olarak geliyor.. Sanırım normalde mor olması lazım...
An it harm none, do what ye will.

heartsmagic

Grub meselesi ayrı bir olay, ancak şu grafik kartı ve çizgiler meselesi biliniyormuş:
https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/751828
https://bugs.launchpad.net/ubuntu/+source/unity/+bug/910624
https://bugs.launchpad.net/unity/+bug/889519
https://bugs.launchpad.net/ubuntu/+source/unity/+bug/801356
https://bugs.freedesktop.org/show_bug.cgi?id=35998

Son verdiğim bağlantı Ubuntu'dan bağımsız, sürücüler tarafında. Ne yazık ki net bir çözüm yok. Bazıları RADEON_DEBUG=notiling gibi bir değişikliğin sorunu çözdüğünü yazmışlar. Bir deneyelim istersen.

gedit ~/.bashrc

ile açacağın dosyanın en altına şu satırı ekle:

export RADEON_DEBUG=notiling ekle, kaydet kapat. Sonra oturumu kapatıp tekrar aç. Eğer çizgiler kaybolmuşsa işe yaramış demektir. Eğer işe yaramadıysa değişkenin etkin olup olmadığını anlamak için şu komutu ver lütfen:

Alıntı Yapecho $RADEON_DEBUG

Sonucunun şöyle olması lazım:
Alıntı Yapnotiling
Hayattan çıkarı olmayanların, ölümden de çıkarı olmayacaktır.
Hayatlarıyla yanlış olanların ölümleriyle doğru olmalarına imkân var mıdır?


Böylece yalan, dünyanın düzenine dönüştürülüyor.

lawubuntu

Alıntı yapılan: heartsmagic - 28 Ağustos 2013 - 11:16:30
Grub meselesi ayrı bir olay, ancak şu grafik kartı ve çizgiler meselesi biliniyormuş:
https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/751828
https://bugs.launchpad.net/ubuntu/+source/unity/+bug/910624
https://bugs.launchpad.net/unity/+bug/889519
https://bugs.launchpad.net/ubuntu/+source/unity/+bug/801356
https://bugs.freedesktop.org/show_bug.cgi?id=35998

Son verdiğim bağlantı Ubuntu'dan bağımsız, sürücüler tarafında. Ne yazık ki net bir çözüm yok. Bazıları RADEON_DEBUG=notiling gibi bir değişikliğin sorunu çözdüğünü yazmışlar. Bir deneyelim istersen.

gedit ~/.bashrc

ile açacağın dosyanın en altına şu satırı ekle:

export RADEON_DEBUG=notiling ekle, kaydet kapat. Sonra oturumu kapatıp tekrar aç. Eğer çizgiler kaybolmuşsa işe yaramış demektir. Eğer işe yaramadıysa değişkenin etkin olup olmadığını anlamak için şu komutu ver lütfen:

Alıntı Yapecho $RADEON_DEBUG

Sonucunun şöyle olması lazım:
Alıntı Yapnotiling

Dediklerinizi yaptıktan sonra
Alıntı Yapecho $RADEON_DEBUG
komutunu yazdım ve
Alıntı Yapnotiling
sonucunu aldım. Ancak çizgiler hala duruyor sanırım işe yaramadı..
An it harm none, do what ye will.

if

uname -a
sudo apt-cache show xserver-xorg-video-radeon
sudo apt-cache show xserver-xorg
cat /var/log/Xorg.0.log
çıktılarına bakayım.

lawubuntu

Alıntı yapılan: if - 31 Ağustos 2013 - 22:15:50
uname -a
sudo apt-cache show xserver-xorg-video-radeon
sudo apt-cache show xserver-xorg
cat /var/log/Xorg.0.log
çıktılarına bakayım.

uname -a konunun sonucu:
Linux KullanıcıAdı-R405-A-CPART 3.5.0-39-generic #60~precise1-Ubuntu SMP Wed Aug 14 15:28:09 UTC 2013 i686 i686 i386 GNU/Linux



sudo apt-cache show xserver-xorg-video-radeon kodunun sonucu:
Package: xserver-xorg-video-radeon
Priority: optional
Section: x11
Installed-Size: 1232
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: i386
Source: xserver-xorg-video-ati
Version: 1:6.14.99~git20111219.aacbd629-0ubuntu2
Provides: xorg-driver-video
Depends: libc6 (>= 2.7), libdrm-radeon1 (>= 2.4.17), libdrm2 (>= 2.4.25), libpciaccess0 (>= 0.10.2), libpixman-1-0, libudev0 (>= 147), xorg-video-abi-11, xserver-xorg-core (>= 2:1.10.99.901)
Suggests: linux-firmware
Filename: pool/main/x/xserver-xorg-video-ati/xserver-xorg-video-radeon_6.14.99~git20111219.aacbd629-0ubuntu2_i386.deb
Size: 444754
MD5sum: 4646b68a579c578cfe5d13247d66c066
SHA1: a07e4e652b06ba69a236710752bc7e14225225bd
SHA256: d01cdca88b6445fab6d6e6cd4004506d6698c3101bf05578eb758ca590ef6c54
Description-en: X.Org X server -- AMD/ATI Radeon display driver
This package provides the 'radeon' driver for the AMD/ATI Radeon, FireGL,
FireMV, FirePro and FireStream series.
.
Note that this is not the same as the ATI-provided, binary-only, 'fglrx'
driver, which provides additional 3D functionality for some newer Radeon
cards, but is not supported.
.
More information about X.Org can be found at:
<URL:http://www.X.org>
.
This package is built from the X.org xf86-video-ati driver module.
Description-md5: f93e0e90d073be08ab51d0e40a42fa95
Bugs: https://bugs.launchpad.net/ubuntu/+filebug
Origin: Ubuntu
Supported: 5y
Task: ubuntu-desktop, ubuntu-usb, kubuntu-desktop, kubuntu-active-desktop, kubuntu-active, edubuntu-desktop, edubuntu-usb, xubuntu-desktop, mythbuntu-frontend, mythbuntu-desktop, mythbuntu-backend-slave, mythbuntu-backend-master, lubuntu-core, ubuntustudio-desktop



sudo apt-cache show xserver-xorg kodunun sonucu:
Package: xserver-xorg
Priority: optional
Section: x11
Installed-Size: 360
Maintainer: Ubuntu X-SWAT <ubuntu-x@lists.ubuntu.com>
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: i386
Source: xorg
Version: 1:7.6+12ubuntu2
Replaces: xorg-renamed-package, xserver-xorg-renamed
Provides: xserver, xserver-xorg-renamed
Depends: xserver-xorg-core (>= 2:1.11), xserver-xorg-video-all (>= 0~) | xorg-driver-video, xserver-xorg-input-all (>= 0~) | xorg-driver-input, xserver-xorg-input-evdev (>= 0~), libc6 (>= 2.7), xkb-data (>= 1.4), x11-xkb-utils
Recommends: libgl1-mesa-dri
Conflicts: xorg-renamed-package, xserver-xorg-renamed
Filename: pool/main/x/xorg/xserver-xorg_7.6+12ubuntu2_i386.deb
Size: 76374
MD5sum: 4f91b82d59c25a2117594e33234cc96d
SHA1: 88f6d0440497f5d4ba26bffb7acd078e90d2661a
SHA256: abc25e21d3d9fef569e7dfd73bed24da42d9f40ffad0f4c2f384c2b5ea746dda
Description-en: X.Org X server
This package depends on the full suite of the server and drivers for the
X.Org X server.  It does not provide the actual server itself.
Description-md5: 3d8c1d268e8af6b69f54d86fbd5a3939
Bugs: https://bugs.launchpad.net/ubuntu/+filebug
Origin: Ubuntu
Supported: 5y
Task: ubuntu-desktop, ubuntu-usb, kubuntu-desktop, kubuntu-active-desktop, kubuntu-active, edubuntu-desktop, edubuntu-usb, xubuntu-desktop, mythbuntu-frontend, mythbuntu-desktop, mythbuntu-backend-slave, mythbuntu-backend-master, lubuntu-core, ubuntustudio-desktop

Package: xserver-xorg
Priority: optional
Section: x11
Installed-Size: 359
Maintainer: Ubuntu X-SWAT <ubuntu-x@lists.ubuntu.com>
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: i386
Source: xorg
Version: 1:7.6+12ubuntu1
Provides: xserver
Depends: xserver-xorg-core (>= 2:1.11), xserver-xorg-video-all | xorg-driver-video, xserver-xorg-input-all | xorg-driver-input, xserver-xorg-input-evdev, libc6 (>= 2.7), xkb-data (>= 1.4), x11-xkb-utils
Recommends: libgl1-mesa-dri
Filename: pool/main/x/xorg/xserver-xorg_7.6+12ubuntu1_i386.deb
Size: 77110
MD5sum: ce4c447dd3c0fe6ff494b46cbef07ec7
SHA1: 4d449dc684239fd5d865ccd56e19b40ece5f781a
SHA256: ca7dd3b43b8291415e435cdb5ff7da43dcfac7b2d0cedc44f5069cd7c2b2f520
Description-en: X.Org X server
This package depends on the full suite of the server and drivers for the
X.Org X server.  It does not provide the actual server itself.
Description-md5: 3d8c1d268e8af6b69f54d86fbd5a3939
Bugs: https://bugs.launchpad.net/ubuntu/+filebug
Origin: Ubuntu
Supported: 5y
Task: ubuntu-desktop, ubuntu-usb, kubuntu-desktop, kubuntu-active-desktop, kubuntu-active, edubuntu-desktop, edubuntu-usb, xubuntu-desktop, mythbuntu-frontend, mythbuntu-desktop, mythbuntu-backend-slave, mythbuntu-backend-master, lubuntu-core, ubuntustudio-desktop




cat /var/log/Xorg.0.log kodunun sonucu da aşağıda ancak uçbirim'de sanırım daha fazla sonuç çıkmasına rağmen bu kadarını gösterebildi:
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, TAHITI, TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE
[    30.380] (II) VESA: driver for VESA chipsets: vesa
[    30.380] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    30.380] (II) FBDEV: driver for framebuffer: fbdev
[    30.380] (++) using VT number 7

[    30.380] (II) [KMS] Kernel modesetting enabled.
[    30.380] (WW) Falling back to old probe method for vesa
[    30.380] (WW) Falling back to old probe method for modesetting
[    30.380] (WW) Falling back to old probe method for fbdev
[    30.380] (II) Loading sub module "fbdevhw"
[    30.380] (II) LoadModule: "fbdevhw"
[    30.380] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    30.381] (II) Module fbdevhw: vendor="X.Org Foundation"
[    30.381] compiled for 1.13.0, module version = 0.0.2
[    30.381] ABI class: X.Org Video Driver, version 13.0
[    30.381] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[    30.381] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[    30.381] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    30.381] (==) RADEON(0): Default visual is TrueColor
[    30.381] (==) RADEON(0): RGB weight 888
[    30.381] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[    30.381] (--) RADEON(0): Chipset: "ATI Radeon X1200" (ChipID = 0x7942)
[    30.381] (II) Loading sub module "dri2"
[    30.381] (II) LoadModule: "dri2"
[    30.381] (II) Module "dri2" already built-in
[    30.381] (II) Loading sub module "exa"
[    30.381] (II) LoadModule: "exa"
[    30.381] (II) Loading /usr/lib/xorg/modules/libexa.so
[    30.381] (II) Module exa: vendor="X.Org Foundation"
[    30.381] compiled for 1.13.0, module version = 2.6.0
[    30.381] ABI class: X.Org Video Driver, version 13.0
[    30.381] (II) RADEON(0): KMS Color Tiling: enabled
[    30.381] (II) RADEON(0): KMS Pageflipping: enabled
[    30.381] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[    30.556] (II) RADEON(0): Output VGA-0 has no monitor section
[    30.556] (II) RADEON(0): Output LVDS has no monitor section
[    30.732] (II) RADEON(0): Output S-video has no monitor section
[    30.908] (II) RADEON(0): EDID for output VGA-0
[    30.908] (II) RADEON(0): EDID for output LVDS
[    30.908] (II) RADEON(0): Manufacturer: LPL  Model: e800  Serial#: 0
[    30.908] (II) RADEON(0): Year: 2007  Week: 0
[    30.908] (II) RADEON(0): EDID Version: 1.1
[    30.908] (II) RADEON(0): Digital Display Input
[    30.908] (II) RADEON(0): Max Image Size [cm]: horiz.: 30  vert.: 19
[    30.908] (II) RADEON(0): Gamma: 2.20
[    30.908] (II) RADEON(0): No DPMS capabilities specified
[    30.908] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    30.908] (II) RADEON(0): First detailed timing is preferred mode
[    30.908] (II) RADEON(0): redX: 0.584 redY: 0.347   greenX: 0.323 greenY: 0.542
[    30.908] (II) RADEON(0): blueX: 0.157 blueY: 0.145   whiteX: 0.312 whiteY: 0.328
[    30.908] (II) RADEON(0): Manufacturer's mask: 0
[    30.908] (II) RADEON(0): Supported detailed timing:
[    30.908] (II) RADEON(0): clock: 71.0 MHz   Image Size:  304 x 190 mm
[    30.908] (II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1440 h_border: 0
[    30.908] (II) RADEON(0): v_active: 800  v_sync: 803  v_sync_end 809 v_blanking: 823 v_border: 0
[    30.908] (II) RADEON(0):  LGPhilipsLCD
[    30.908] (II) RADEON(0):  LP141WX3-TLB1
[    30.908] (II) RADEON(0): EDID (in hex):
[    30.908] (II) RADEON(0): 00ffffffffffff00320c00e800000000
[    30.908] (II) RADEON(0): 00110101801e13780abf409558528a28
[    30.908] (II) RADEON(0): 25505400000001010101010101010101
[    30.908] (II) RADEON(0): 010101010101bc1b00a0502017303020
[    30.908] (II) RADEON(0): 360030be100000180000000000000000
[    30.908] (II) RADEON(0): 00000000000000000000000000fe004c
[    30.908] (II) RADEON(0): 475068696c6970734c43440a000000fe
[    30.908] (II) RADEON(0): 004c503134315758332d544c4231006e
[    30.908] (II) RADEON(0): Printing probed modes for output LVDS
[    30.908] (II) RADEON(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz eP)
[    30.908] (II) RADEON(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz)
[    30.908] (II) RADEON(0): Modeline "1152x768"x59.8   71.75  1152 1216 1328 1504  768 771 781 798 -hsync +vsync (47.7 kHz)
[    30.908] (II) RADEON(0): Modeline "1024x768"x59.9   63.50  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz)
[    30.908] (II) RADEON(0): Modeline "800x600"x59.9   38.25  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz)
[    30.908] (II) RADEON(0): Modeline "848x480"x59.7   31.50  848 872 952 1056  480 483 493 500 -hsync +vsync (29.8 kHz)
[    30.908] (II) RADEON(0): Modeline "720x480"x59.7   26.75  720 744 808 896  480 483 493 500 -hsync +vsync (29.9 kHz)
[    30.908] (II) RADEON(0): Modeline "640x480"x59.4   23.75  640 664 720 800  480 483 487 500 -hsync +vsync (29.7 kHz)
[    31.084] (II) RADEON(0): EDID for output S-video
[    31.084] (II) RADEON(0): Output VGA-0 disconnected
[    31.084] (II) RADEON(0): Output LVDS connected
[    31.084] (II) RADEON(0): Output S-video disconnected
[    31.084] (II) RADEON(0): Using exact sizes for initial modes
[    31.084] (II) RADEON(0): Output LVDS using initial mode 1280x800
[    31.084] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    31.084] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:8000000 visible:7bd8000
[    31.084] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[    31.084] (==) RADEON(0): DPI set to (96, 96)
[    31.084] (II) Loading sub module "fb"
[    31.084] (II) LoadModule: "fb"
[    31.084] (II) Loading /usr/lib/xorg/modules/libfb.so
[    31.084] (II) Module fb: vendor="X.Org Foundation"
[    31.084] compiled for 1.13.0, module version = 1.0.0
[    31.084] ABI class: X.Org ANSI C Emulation, version 0.4
[    31.084] (II) Loading sub module "ramdac"
[    31.084] (II) LoadModule: "ramdac"
[    31.084] (II) Module "ramdac" already built-in
[    31.084] (II) UnloadModule: "vesa"
[    31.084] (II) Unloading vesa
[    31.084] (II) UnloadModule: "modesetting"
[    31.085] (II) Unloading modesetting
[    31.085] (II) UnloadModule: "fbdev"
[    31.085] (II) Unloading fbdev
[    31.085] (II) UnloadSubModule: "fbdevhw"
[    31.085] (II) Unloading fbdevhw
[    31.085] (--) Depth 24 pixmap format is 32 bpp
[    31.085] (II) RADEON(0): [DRI2] Setup complete
[    31.085] (II) RADEON(0): [DRI2]   DRI driver: r300
[    31.085] (II) RADEON(0): [DRI2]   VDPAU driver: r300
[    31.085] (II) RADEON(0): Front buffer size: 4000K
[    31.085] (II) RADEON(0): VRAM usage limit set to 110534K
[    31.085] (==) RADEON(0): Backing store disabled
[    31.085] (II) RADEON(0): Direct rendering enabled
[    31.085] (II) RADEON(0): Render acceleration enabled for R300/R400/R500 type cards.
[    31.085] (II) RADEON(0): Setting EXA maxPitchBytes
[    31.085] (II) EXA(0): Driver allocated offscreen pixmaps
[    31.085] (II) EXA(0): Driver registered support for the following operations:
[    31.085] (II)         Solid
[    31.085] (II)         Copy
[    31.085] (II)         Composite (RENDER acceleration)
[    31.085] (II)         UploadToScreen
[    31.085] (II)         DownloadFromScreen
[    31.085] (II) RADEON(0): Acceleration enabled
[    31.085] (==) RADEON(0): DPMS enabled
[    31.085] (==) RADEON(0): Silken mouse enabled
[    31.085] (II) RADEON(0): Set up textured video
[    31.085] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[    31.085] (II) RADEON(0): [XvMC] Extension initialized.
[    31.085] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    31.086] (--) RandR disabled
[    31.106] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    31.106] (II) AIGLX: enabled GLX_INTEL_swap_event
[    31.106] (II) AIGLX: enabled GLX_ARB_create_context
[    31.106] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    31.106] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    31.106] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    31.106] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    31.106] (II) AIGLX: Loaded and initialized r300
[    31.106] (II) GLX: Initialized DRI2 GL provider for screen 0
[    31.107] (II) RADEON(0): Setting screen physical size to 338 x 211
[    31.119] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    31.123] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    31.123] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    31.123] (II) LoadModule: "evdev"
[    31.123] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    31.123] (II) Module evdev: vendor="X.Org Foundation"
[    31.123] compiled for 1.13.0, module version = 2.7.3
[    31.123] Module class: X.Org XInput Driver
[    31.123] ABI class: X.Org XInput driver, version 18.0
[    31.123] (II) Using input driver 'evdev' for 'Power Button'
[    31.123] (**) Power Button: always reports core events
[    31.123] (**) evdev: Power Button: Device: "/dev/input/event3"
[    31.124] (--) evdev: Power Button: Vendor 0 Product 0x1
[    31.124] (--) evdev: Power Button: Found keys
[    31.124] (II) evdev: Power Button: Configuring as keyboard
[    31.124] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    31.124] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    31.124] (**) Option "xkb_rules" "evdev"
[    31.124] (**) Option "xkb_model" "pc105"
[    31.124] (**) Option "xkb_layout" "tr"
[    31.126] (II) XKB: reuse xkmfile /var/lib/xkb/server-609880D4F1521A95A29BCD7AB1227A69EC9A1B72.xkm
[    31.127] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[    31.127] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    31.127] (II) Using input driver 'evdev' for 'Video Bus'
[    31.127] (**) Video Bus: always reports core events
[    31.128] (**) evdev: Video Bus: Device: "/dev/input/event7"
[    31.128] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    31.128] (--) evdev: Video Bus: Found keys
[    31.128] (II) evdev: Video Bus: Configuring as keyboard
[    31.128] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1d/LNXVIDEO:00/input/input7/event7"
[    31.128] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    31.128] (**) Option "xkb_rules" "evdev"
[    31.128] (**) Option "xkb_model" "pc105"
[    31.128] (**) Option "xkb_layout" "tr"
[    31.128] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    31.128] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    31.128] (II) Using input driver 'evdev' for 'Power Button'
[    31.128] (**) Power Button: always reports core events
[    31.128] (**) evdev: Power Button: Device: "/dev/input/event2"
[    31.128] (--) evdev: Power Button: Vendor 0 Product 0x1
[    31.128] (--) evdev: Power Button: Found keys
[    31.128] (II) evdev: Power Button: Configuring as keyboard
[    31.129] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[    31.129] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    31.129] (**) Option "xkb_rules" "evdev"
[    31.129] (**) Option "xkb_model" "pc105"
[    31.129] (**) Option "xkb_layout" "tr"
[    31.129] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    31.129] (II) No input driver specified, ignoring this device.
[    31.129] (II) This device may have been added with another device file.
[    31.130] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[    31.130] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    31.130] (II) Using input driver 'evdev' for 'Sleep Button'
[    31.130] (**) Sleep Button: always reports core events
[    31.130] (**) evdev: Sleep Button: Device: "/dev/input/event0"
[    31.130] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    31.130] (--) evdev: Sleep Button: Found keys
[    31.130] (II) evdev: Sleep Button: Configuring as keyboard
[    31.130] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[    31.130] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    31.130] (**) Option "xkb_rules" "evdev"
[    31.130] (**) Option "xkb_model" "pc105"
[    31.130] (**) Option "xkb_layout" "tr"
[    31.130] (II) config/udev: Adding drm device (/dev/dri/card0)
[    31.131] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/event5)
[    31.131] (**) A4TECH USB Device: Applying InputClass "evdev keyboard catchall"
[    31.131] (II) Using input driver 'evdev' for 'A4TECH USB Device'
[    31.131] (**) A4TECH USB Device: always reports core events
[    31.131] (**) evdev: A4TECH USB Device: Device: "/dev/input/event5"
[    31.131] (--) evdev: A4TECH USB Device: Vendor 0x9da Product 0x54f
[    31.131] (--) evdev: A4TECH USB Device: Found 1 mouse buttons
[    31.131] (--) evdev: A4TECH USB Device: Found scroll wheel(s)
[    31.131] (--) evdev: A4TECH USB Device: Found relative axes
[    31.131] (--) evdev: A4TECH USB Device: Found absolute axes
[    31.131] (--) evdev: A4TECH USB Device: Found absolute multitouch axes
[    31.131] (--) evdev: A4TECH USB Device: Found x and y absolute axes
[    31.131] (--) evdev: A4TECH USB Device: Found keys
[    31.131] (II) evdev: A4TECH USB Device: Forcing relative x/y axes to exist.
[    31.131] (II) evdev: A4TECH USB Device: Configuring as mouse
[    31.131] (II) evdev: A4TECH USB Device: Configuring as keyboard
[    31.131] (II) evdev: A4TECH USB Device: Adding scrollwheel support
[    31.131] (**) evdev: A4TECH USB Device: YAxisMapping: buttons 4 and 5
[    31.131] (**) evdev: A4TECH USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    31.131] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.0/input/input5/event5"
[    31.131] (II) XINPUT: Adding extended input device "A4TECH USB Device" (type: KEYBOARD, id 10)
[    31.131] (**) Option "xkb_rules" "evdev"
[    31.131] (**) Option "xkb_model" "pc105"
[    31.131] (**) Option "xkb_layout" "tr"
[    31.132] (II) evdev: A4TECH USB Device: initialized for relative axes.
[    31.132] (WW) evdev: A4TECH USB Device: ignoring absolute axes.
[    31.132] (**) A4TECH USB Device: (accel) keeping acceleration scheme 1
[    31.132] (**) A4TECH USB Device: (accel) acceleration profile 0
[    31.132] (**) A4TECH USB Device: (accel) acceleration factor: 2.000
[    31.132] (**) A4TECH USB Device: (accel) acceleration threshold: 4
[    31.132] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/js0)
[    31.132] (II) No input driver specified, ignoring this device.
[    31.132] (II) This device may have been added with another device file.
[    31.133] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/event6)
[    31.133] (**) A4TECH USB Device: Applying InputClass "evdev pointer catchall"
[    31.133] (II) Using input driver 'evdev' for 'A4TECH USB Device'
[    31.133] (**) A4TECH USB Device: always reports core events
[    31.133] (**) evdev: A4TECH USB Device: Device: "/dev/input/event6"
[    31.133] (--) evdev: A4TECH USB Device: Vendor 0x9da Product 0x54f
[    31.133] (--) evdev: A4TECH USB Device: Found 20 mouse buttons
[    31.133] (--) evdev: A4TECH USB Device: Found scroll wheel(s)
[    31.133] (--) evdev: A4TECH USB Device: Found relative axes
[    31.133] (--) evdev: A4TECH USB Device: Found x and y relative axes
[    31.133] (II) evdev: A4TECH USB Device: Configuring as mouse
[    31.133] (II) evdev: A4TECH USB Device: Adding scrollwheel support
[    31.133] (**) evdev: A4TECH USB Device: YAxisMapping: buttons 4 and 5
[    31.133] (**) evdev: A4TECH USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    31.133] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.1/input/input6/event6"
[    31.133] (II) XINPUT: Adding extended input device "A4TECH USB Device" (type: MOUSE, id 11)
[    31.133] (II) evdev: A4TECH USB Device: initialized for relative axes.
[    31.133] (**) A4TECH USB Device: (accel) keeping acceleration scheme 1
[    31.133] (**) A4TECH USB Device: (accel) acceleration profile 0
[    31.133] (**) A4TECH USB Device: (accel) acceleration factor: 2.000
[    31.133] (**) A4TECH USB Device: (accel) acceleration threshold: 4
[    31.134] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/mouse0)
[    31.134] (II) No input driver specified, ignoring this device.
[    31.134] (II) This device may have been added with another device file.
[    31.134] (II) config/udev: Adding input device LG Webcam (/dev/input/event8)
[    31.134] (**) LG Webcam: Applying InputClass "evdev keyboard catchall"
[    31.134] (II) Using input driver 'evdev' for 'LG Webcam'
[    31.134] (**) LG Webcam: always reports core events
[    31.134] (**) evdev: LG Webcam: Device: "/dev/input/event8"
[    31.134] (--) evdev: LG Webcam: Vendor 0xc45 Product 0x62c0
[    31.134] (--) evdev: LG Webcam: Found keys
[    31.134] (II) evdev: LG Webcam: Configuring as keyboard
[    31.134] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.5/usb1/1-9/1-9:1.0/input/input8/event8"
[    31.134] (II) XINPUT: Adding extended input device "LG Webcam" (type: KEYBOARD, id 12)
[    31.134] (**) Option "xkb_rules" "evdev"
[    31.134] (**) Option "xkb_model" "pc105"
[    31.134] (**) Option "xkb_layout" "tr"
[    31.135] (II) config/udev: Adding input device HDA ATI SB Mic (/dev/input/event10)
[    31.135] (II) No input driver specified, ignoring this device.
[    31.135] (II) This device may have been added with another device file.
[    31.135] (II) config/udev: Adding input device HDA ATI SB Headphone (/dev/input/event11)
[    31.135] (II) No input driver specified, ignoring this device.
[    31.135] (II) This device may have been added with another device file.
[    31.136] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[    31.136] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    31.136] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    31.136] (**) AT Translated Set 2 keyboard: always reports core events
[    31.136] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[    31.136] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    31.136] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    31.136] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    31.136] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[    31.136] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[    31.136] (**) Option "xkb_rules" "evdev"
[    31.136] (**) Option "xkb_model" "pc105"
[    31.136] (**) Option "xkb_layout" "tr"
[    31.137] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
[    31.137] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    31.137] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    31.137] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    31.137] (II) LoadModule: "synaptics"
[    31.137] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    31.137] (II) Module synaptics: vendor="X.Org Foundation"
[    31.137] compiled for 1.13.0, module version = 1.6.2
[    31.137] Module class: X.Org XInput Driver
[    31.137] ABI class: X.Org XInput driver, version 18.0
[    31.137] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    31.137] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    31.137] (**) Option "Device" "/dev/input/event9"
[    31.220] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[    31.220] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[    31.220] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    31.220] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    31.220] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    31.220] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    31.220] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    31.220] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    31.252] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input9/event9"
[    31.252] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
[    31.252] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    31.252] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[    31.252] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040
[    31.253] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    31.253] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    31.253] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    31.253] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    31.253] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    31.253] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[    31.253] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    42.672] (II) RADEON(0): EDID vendor "LPL", prod id 59392
[    42.672] (II) RADEON(0): Printing DDC gathered Modelines:
[    42.672] (II) RADEON(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz eP)
[    43.700] (II) RADEON(0): EDID vendor "LPL", prod id 59392
[    43.700] (II) RADEON(0): Printing DDC gathered Modelines:
[    43.700] (II) RADEON(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz eP)
[    45.458] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF3F27E17B0AEC7956F3A5E53BE1426386745F01.xkm
[    45.784] (II) RADEON(0): EDID vendor "LPL", prod id 59392
[    45.784] (II) RADEON(0): Printing DDC gathered Modelines:
[    45.784] (II) RADEON(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz eP)
[    63.884] (II) RADEON(0): EDID vendor "LPL", prod id 59392
[    63.884] (II) RADEON(0): Printing DDC gathered Modelines:
[    63.884] (II) RADEON(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz eP)
[  1337.981] (II) RADEON(0): EDID vendor "LPL", prod id 59392
[  1337.999] (II) RADEON(0): Printing DDC gathered Modelines:
[  1337.999] (II) RADEON(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz eP)
[  1338.388] (II) RADEON(0): EDID vendor "LPL", prod id 59392
[  1338.388] (II) RADEON(0): Printing DDC gathered Modelines:
[  1338.388] (II) RADEON(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz eP)
[  1338.788] (II) RADEON(0): EDID vendor "LPL", prod id 59392
[  1338.788] (II) RADEON(0): Printing DDC gathered Modelines:
[  1338.788] (II) RADEON(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz eP)
[  1339.784] (II) RADEON(0): EDID vendor "LPL", prod id 59392
[  1339.784] (II) RADEON(0): Printing DDC gathered Modelines:
[  1339.784] (II) RADEON(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz eP)
[  1340.248] (II) RADEON(0): EDID vendor "LPL", prod id 59392
[  1340.248] (II) RADEON(0): Printing DDC gathered Modelines:
[  1340.248] (II) RADEON(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz eP)
[  1340.604] (II) RADEON(0): EDID vendor "LPL", prod id 59392
[  1340.604] (II) RADEON(0): Printing DDC gathered Modelines:
[  1340.604] (II) RADEON(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz eP)
[  1341.456] (II) RADEON(0): EDID vendor "LPL", prod id 59392
[  1341.456] (II) RADEON(0): Printing DDC gathered Modelines:
[  1341.456] (II) RADEON(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz eP)
[  1342.380] (II) RADEON(0): EDID vendor "LPL", prod id 59392
[  1342.380] (II) RADEON(0): Printing DDC gathered Modelines:
[  1342.380] (II) RADEON(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz eP)
An it harm none, do what ye will.

if

Xorg.0.log çıktısı tam çıkmamış. Uçbirim ayarlarından kaydırmayı sonsuz yapıp tekrar alın.

lawubuntu

Evet şimdi tamamına eriştim:

[    30.325]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[    30.325] X Protocol Version 11, Revision 0
[    30.325] Build Operating System: Linux 2.6.42-37-generic i686 Ubuntu
[    30.325] Current Operating System: Linux besir-R405-A-CPART 3.5.0-39-generic #60~precise1-Ubuntu SMP Wed Aug 14 15:28:09 UTC 2013 i686
[    30.325] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-39-generic root=UUID=dd7518ff-9f59-44a3-924a-8c30c8fcb404 ro quiet splash vt.handoff=7
[    30.325] Build Date: 11 April 2013  11:50:36PM
[    30.325] xorg-server 2:1.13.0-0ubuntu6.1~precise3 (For technical support please see http://www.ubuntu.com/support)
[    30.325] Current version of pixman: 0.24.4
[    30.325] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[    30.325] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    30.325] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug 31 22:46:11 2013
[    30.340] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    30.340] (==) No Layout section.  Using the first Screen section.
[    30.340] (==) No screen section available. Using defaults.
[    30.340] (**) |-->Screen "Default Screen Section" (0)
[    30.340] (**) |   |-->Monitor "<default monitor>"
[    30.340] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[    30.340] (==) Automatically adding devices
[    30.340] (==) Automatically enabling devices
[    30.340] (==) Automatically adding GPU devices
[    30.341] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    30.341] Entry deleted from font path.
[    30.341] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    30.341] Entry deleted from font path.
[    30.341] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    30.341] Entry deleted from font path.
[    30.341] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    30.341] Entry deleted from font path.
[    30.341] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    30.341] Entry deleted from font path.
[    30.341] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    30.341] Entry deleted from font path.
[    30.341] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[    30.341] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    30.341] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[    30.341] (II) Loader magic: 0xb77a2620
[    30.341] (II) Module ABI versions:
[    30.341] X.Org ANSI C Emulation: 0.4
[    30.341] X.Org Video Driver: 13.0
[    30.341] X.Org XInput driver : 18.0
[    30.341] X.Org Server Extension : 7.0
[    30.341] (II) config/udev: Adding drm device (/dev/dri/card0)
[    30.343] (--) PCI:*(0:1:5:0) 1002:7942:1854:0123 rev 0, Mem @ 0xf0000000/134217728, 0xf8000000/65536, I/O @ 0x00009000/256
[    30.343] (II) Open ACPI successful (/var/run/acpid.socket)
[    30.343] Initializing built-in extension Generic Event Extension
[    30.343] Initializing built-in extension SHAPE
[    30.343] Initializing built-in extension MIT-SHM
[    30.343] Initializing built-in extension XInputExtension
[    30.343] Initializing built-in extension XTEST
[    30.343] Initializing built-in extension BIG-REQUESTS
[    30.343] Initializing built-in extension SYNC
[    30.343] Initializing built-in extension XKEYBOARD
[    30.343] Initializing built-in extension XC-MISC
[    30.343] Initializing built-in extension SECURITY
[    30.343] Initializing built-in extension XINERAMA
[    30.343] Initializing built-in extension XFIXES
[    30.343] Initializing built-in extension RENDER
[    30.343] Initializing built-in extension RANDR
[    30.343] Initializing built-in extension COMPOSITE
[    30.343] Initializing built-in extension DAMAGE
[    30.343] Initializing built-in extension MIT-SCREEN-SAVER
[    30.343] Initializing built-in extension DOUBLE-BUFFER
[    30.343] Initializing built-in extension RECORD
[    30.343] Initializing built-in extension DPMS
[    30.343] Initializing built-in extension X-Resource
[    30.343] Initializing built-in extension XVideo
[    30.343] Initializing built-in extension XVideo-MotionCompensation
[    30.343] Initializing built-in extension XFree86-VidModeExtension
[    30.343] Initializing built-in extension XFree86-DGA
[    30.343] Initializing built-in extension XFree86-DRI
[    30.343] Initializing built-in extension DRI2
[    30.343] (II) LoadModule: "glx"
[    30.354] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    30.354] (II) Module glx: vendor="X.Org Foundation"
[    30.354] compiled for 1.13.0, module version = 1.0.0
[    30.354] ABI class: X.Org Server Extension, version 7.0
[    30.354] (==) AIGLX enabled
[    30.354] Loading extension GLX
[    30.354] (==) Matched fglrx as autoconfigured driver 0
[    30.354] (==) Matched ati as autoconfigured driver 1
[    30.354] (==) Matched fglrx as autoconfigured driver 2
[    30.354] (==) Matched ati as autoconfigured driver 3
[    30.354] (==) Matched vesa as autoconfigured driver 4
[    30.354] (==) Matched modesetting as autoconfigured driver 5
[    30.354] (==) Matched fbdev as autoconfigured driver 6
[    30.354] (==) Assigned the driver to the xf86ConfigLayout
[    30.354] (II) LoadModule: "fglrx"
[    30.370] (WW) Warning, couldn't open module fglrx
[    30.370] (II) UnloadModule: "fglrx"
[    30.370] (II) Unloading fglrx
[    30.370] (EE) Failed to load module "fglrx" (module does not exist, 0)
[    30.370] (II) LoadModule: "ati"
[    30.370] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[    30.371] (II) Module ati: vendor="X.Org Foundation"
[    30.371] compiled for 1.13.0, module version = 6.99.99
[    30.371] Module class: X.Org Video Driver
[    30.371] ABI class: X.Org Video Driver, version 13.0
[    30.371] (II) LoadModule: "radeon"
[    30.371] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[    30.371] (II) Module radeon: vendor="X.Org Foundation"
[    30.371] compiled for 1.13.0, module version = 6.99.99
[    30.371] Module class: X.Org Video Driver
[    30.371] ABI class: X.Org Video Driver, version 13.0
[    30.371] (II) LoadModule: "vesa"
[    30.371] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    30.372] (II) Module vesa: vendor="X.Org Foundation"
[    30.372] compiled for 1.13.0, module version = 2.3.2
[    30.372] Module class: X.Org Video Driver
[    30.372] ABI class: X.Org Video Driver, version 13.0
[    30.372] (II) LoadModule: "modesetting"
[    30.372] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    30.372] (II) Module modesetting: vendor="X.Org Foundation"
[    30.372] compiled for 1.13.0, module version = 0.5.0
[    30.372] Module class: X.Org Video Driver
[    30.372] ABI class: X.Org Video Driver, version 13.0
[    30.372] (II) LoadModule: "fbdev"
[    30.372] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    30.372] (II) Module fbdev: vendor="X.Org Foundation"
[    30.372] compiled for 1.13.0, module version = 0.4.3
[    30.373] Module class: X.Org Video Driver
[    30.373] ABI class: X.Org Video Driver, version 13.0
[    30.373] (==) Matched fglrx as autoconfigured driver 0
[    30.373] (==) Matched ati as autoconfigured driver 1
[    30.373] (==) Matched fglrx as autoconfigured driver 2
[    30.373] (==) Matched ati as autoconfigured driver 3
[    30.373] (==) Matched vesa as autoconfigured driver 4
[    30.373] (==) Matched modesetting as autoconfigured driver 5
[    30.373] (==) Matched fbdev as autoconfigured driver 6
[    30.373] (==) Assigned the driver to the xf86ConfigLayout
[    30.373] (II) LoadModule: "fglrx"
[    30.373] (WW) Warning, couldn't open module fglrx
[    30.373] (II) UnloadModule: "fglrx"
[    30.373] (II) Unloading fglrx
[    30.373] (EE) Failed to load module "fglrx" (module does not exist, 0)
[    30.373] (II) LoadModule: "ati"
[    30.373] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[    30.373] (II) Module ati: vendor="X.Org Foundation"
[    30.374] compiled for 1.13.0, module version = 6.99.99
[    30.374] Module class: X.Org Video Driver
[    30.374] ABI class: X.Org Video Driver, version 13.0
[    30.374] (II) LoadModule: "vesa"
[    30.374] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    30.374] (II) Module vesa: vendor="X.Org Foundation"
[    30.374] compiled for 1.13.0, module version = 2.3.2
[    30.374] Module class: X.Org Video Driver
[    30.374] ABI class: X.Org Video Driver, version 13.0
[    30.374] (II) UnloadModule: "vesa"
[    30.374] (II) Unloading vesa
[    30.374] (II) Failed to load module "vesa" (already loaded, 0)
[    30.374] (II) LoadModule: "modesetting"
[    30.374] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    30.374] (II) Module modesetting: vendor="X.Org Foundation"
[    30.374] compiled for 1.13.0, module version = 0.5.0
[    30.374] Module class: X.Org Video Driver
[    30.374] ABI class: X.Org Video Driver, version 13.0
[    30.374] (II) UnloadModule: "modesetting"
[    30.374] (II) Unloading modesetting
[    30.374] (II) Failed to load module "modesetting" (already loaded, 0)
[    30.374] (II) LoadModule: "fbdev"
[    30.375] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    30.375] (II) Module fbdev: vendor="X.Org Foundation"
[    30.375] compiled for 1.13.0, module version = 0.4.3
[    30.375] Module class: X.Org Video Driver
[    30.375] ABI class: X.Org Video Driver, version 13.0
[    30.375] (II) UnloadModule: "fbdev"
[    30.375] (II) Unloading fbdev
[    30.375] (II) Failed to load module "fbdev" (already loaded, 0)
[    30.375] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, TAHITI, TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE
[    30.380] (II) VESA: driver for VESA chipsets: vesa
[    30.380] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    30.380] (II) FBDEV: driver for framebuffer: fbdev
[    30.380] (++) using VT number 7

[    30.380] (II) [KMS] Kernel modesetting enabled.
[    30.380] (WW) Falling back to old probe method for vesa
[    30.380] (WW) Falling back to old probe method for modesetting
[    30.380] (WW) Falling back to old probe method for fbdev
[    30.380] (II) Loading sub module "fbdevhw"
[    30.380] (II) LoadModule: "fbdevhw"
[    30.380] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    30.381] (II) Module fbdevhw: vendor="X.Org Foundation"
[    30.381] compiled for 1.13.0, module version = 0.0.2
[    30.381] ABI class: X.Org Video Driver, version 13.0
[    30.381] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[    30.381] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[    30.381] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    30.381] (==) RADEON(0): Default visual is TrueColor
[    30.381] (==) RADEON(0): RGB weight 888
[    30.381] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[    30.381] (--) RADEON(0): Chipset: "ATI Radeon X1200" (ChipID = 0x7942)
[    30.381] (II) Loading sub module "dri2"
[    30.381] (II) LoadModule: "dri2"
[    30.381] (II) Module "dri2" already built-in
[    30.381] (II) Loading sub module "exa"
[    30.381] (II) LoadModule: "exa"
[    30.381] (II) Loading /usr/lib/xorg/modules/libexa.so
[    30.381] (II) Module exa: vendor="X.Org Foundation"
[    30.381] compiled for 1.13.0, module version = 2.6.0
[    30.381] ABI class: X.Org Video Driver, version 13.0
[    30.381] (II) RADEON(0): KMS Color Tiling: enabled
[    30.381] (II) RADEON(0): KMS Pageflipping: enabled
[    30.381] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[    30.556] (II) RADEON(0): Output VGA-0 has no monitor section
[    30.556] (II) RADEON(0): Output LVDS has no monitor section
[    30.732] (II) RADEON(0): Output S-video has no monitor section
[    30.908] (II) RADEON(0): EDID for output VGA-0
[    30.908] (II) RADEON(0): EDID for output LVDS
[    30.908] (II) RADEON(0): Manufacturer: LPL  Model: e800  Serial#: 0
[    30.908] (II) RADEON(0): Year: 2007  Week: 0
[    30.908] (II) RADEON(0): EDID Version: 1.1
[    30.908] (II) RADEON(0): Digital Display Input
[    30.908] (II) RADEON(0): Max Image Size [cm]: horiz.: 30  vert.: 19
[    30.908] (II) RADEON(0): Gamma: 2.20
[    30.908] (II) RADEON(0): No DPMS capabilities specified
[    30.908] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    30.908] (II) RADEON(0): First detailed timing is preferred mode
[    30.908] (II) RADEON(0): redX: 0.584 redY: 0.347   greenX: 0.323 greenY: 0.542
[    30.908] (II) RADEON(0): blueX: 0.157 blueY: 0.145   whiteX: 0.312 whiteY: 0.328
[    30.908] (II) RADEON(0): Manufacturer's mask: 0
[    30.908] (II) RADEON(0): Supported detailed timing:
[    30.908] (II) RADEON(0): clock: 71.0 MHz   Image Size:  304 x 190 mm
[    30.908] (II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1440 h_border: 0
[    30.908] (II) RADEON(0): v_active: 800  v_sync: 803  v_sync_end 809 v_blanking: 823 v_border: 0
[    30.908] (II) RADEON(0):  LGPhilipsLCD
[    30.908] (II) RADEON(0):  LP141WX3-TLB1
[    30.908] (II) RADEON(0): EDID (in hex):
[    30.908] (II) RADEON(0): 00ffffffffffff00320c00e800000000
[    30.908] (II) RADEON(0): 00110101801e13780abf409558528a28
[    30.908] (II) RADEON(0): 25505400000001010101010101010101
[    30.908] (II) RADEON(0): 010101010101bc1b00a0502017303020
[    30.908] (II) RADEON(0): 360030be100000180000000000000000
[    30.908] (II) RADEON(0): 00000000000000000000000000fe004c
[    30.908] (II) RADEON(0): 475068696c6970734c43440a000000fe
[    30.908] (II) RADEON(0): 004c503134315758332d544c4231006e
[    30.908] (II) RADEON(0): Printing probed modes for output LVDS
[    30.908] (II) RADEON(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz eP)
[    30.908] (II) RADEON(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz)
[    30.908] (II) RADEON(0): Modeline "1152x768"x59.8   71.75  1152 1216 1328 1504  768 771 781 798 -hsync +vsync (47.7 kHz)
[    30.908] (II) RADEON(0): Modeline "1024x768"x59.9   63.50  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz)
[    30.908] (II) RADEON(0): Modeline "800x600"x59.9   38.25  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz)
[    30.908] (II) RADEON(0): Modeline "848x480"x59.7   31.50  848 872 952 1056  480 483 493 500 -hsync +vsync (29.8 kHz)
[    30.908] (II) RADEON(0): Modeline "720x480"x59.7   26.75  720 744 808 896  480 483 493 500 -hsync +vsync (29.9 kHz)
[    30.908] (II) RADEON(0): Modeline "640x480"x59.4   23.75  640 664 720 800  480 483 487 500 -hsync +vsync (29.7 kHz)
[    31.084] (II) RADEON(0): EDID for output S-video
[    31.084] (II) RADEON(0): Output VGA-0 disconnected
[    31.084] (II) RADEON(0): Output LVDS connected
[    31.084] (II) RADEON(0): Output S-video disconnected
[    31.084] (II) RADEON(0): Using exact sizes for initial modes
[    31.084] (II) RADEON(0): Output LVDS using initial mode 1280x800
[    31.084] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    31.084] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:8000000 visible:7bd8000
[    31.084] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[    31.084] (==) RADEON(0): DPI set to (96, 96)
[    31.084] (II) Loading sub module "fb"
[    31.084] (II) LoadModule: "fb"
[    31.084] (II) Loading /usr/lib/xorg/modules/libfb.so
[    31.084] (II) Module fb: vendor="X.Org Foundation"
[    31.084] compiled for 1.13.0, module version = 1.0.0
[    31.084] ABI class: X.Org ANSI C Emulation, version 0.4
[    31.084] (II) Loading sub module "ramdac"
[    31.084] (II) LoadModule: "ramdac"
[    31.084] (II) Module "ramdac" already built-in
[    31.084] (II) UnloadModule: "vesa"
[    31.084] (II) Unloading vesa
[    31.084] (II) UnloadModule: "modesetting"
[    31.085] (II) Unloading modesetting
[    31.085] (II) UnloadModule: "fbdev"
[    31.085] (II) Unloading fbdev
[    31.085] (II) UnloadSubModule: "fbdevhw"
[    31.085] (II) Unloading fbdevhw
[    31.085] (--) Depth 24 pixmap format is 32 bpp
[    31.085] (II) RADEON(0): [DRI2] Setup complete
[    31.085] (II) RADEON(0): [DRI2]   DRI driver: r300
[    31.085] (II) RADEON(0): [DRI2]   VDPAU driver: r300
[    31.085] (II) RADEON(0): Front buffer size: 4000K
[    31.085] (II) RADEON(0): VRAM usage limit set to 110534K
[    31.085] (==) RADEON(0): Backing store disabled
[    31.085] (II) RADEON(0): Direct rendering enabled
[    31.085] (II) RADEON(0): Render acceleration enabled for R300/R400/R500 type cards.
[    31.085] (II) RADEON(0): Setting EXA maxPitchBytes
[    31.085] (II) EXA(0): Driver allocated offscreen pixmaps
[    31.085] (II) EXA(0): Driver registered support for the following operations:
[    31.085] (II)         Solid
[    31.085] (II)         Copy
[    31.085] (II)         Composite (RENDER acceleration)
[    31.085] (II)         UploadToScreen
[    31.085] (II)         DownloadFromScreen
[    31.085] (II) RADEON(0): Acceleration enabled
[    31.085] (==) RADEON(0): DPMS enabled
[    31.085] (==) RADEON(0): Silken mouse enabled
[    31.085] (II) RADEON(0): Set up textured video
[    31.085] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[    31.085] (II) RADEON(0): [XvMC] Extension initialized.
[    31.085] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    31.086] (--) RandR disabled
[    31.106] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    31.106] (II) AIGLX: enabled GLX_INTEL_swap_event
[    31.106] (II) AIGLX: enabled GLX_ARB_create_context
[    31.106] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    31.106] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    31.106] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    31.106] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    31.106] (II) AIGLX: Loaded and initialized r300
[    31.106] (II) GLX: Initialized DRI2 GL provider for screen 0
[    31.107] (II) RADEON(0): Setting screen physical size to 338 x 211
[    31.119] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    31.123] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    31.123] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    31.123] (II) LoadModule: "evdev"
[    31.123] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    31.123] (II) Module evdev: vendor="X.Org Foundation"
[    31.123] compiled for 1.13.0, module version = 2.7.3
[    31.123] Module class: X.Org XInput Driver
[    31.123] ABI class: X.Org XInput driver, version 18.0
[    31.123] (II) Using input driver 'evdev' for 'Power Button'
[    31.123] (**) Power Button: always reports core events
[    31.123] (**) evdev: Power Button: Device: "/dev/input/event3"
[    31.124] (--) evdev: Power Button: Vendor 0 Product 0x1
[    31.124] (--) evdev: Power Button: Found keys
[    31.124] (II) evdev: Power Button: Configuring as keyboard
[    31.124] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    31.124] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    31.124] (**) Option "xkb_rules" "evdev"
[    31.124] (**) Option "xkb_model" "pc105"
[    31.124] (**) Option "xkb_layout" "tr"
[    31.126] (II) XKB: reuse xkmfile /var/lib/xkb/server-609880D4F1521A95A29BCD7AB1227A69EC9A1B72.xkm
[    31.127] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[    31.127] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    31.127] (II) Using input driver 'evdev' for 'Video Bus'
[    31.127] (**) Video Bus: always reports core events
[    31.128] (**) evdev: Video Bus: Device: "/dev/input/event7"
[    31.128] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    31.128] (--) evdev: Video Bus: Found keys
[    31.128] (II) evdev: Video Bus: Configuring as keyboard
[    31.128] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1d/LNXVIDEO:00/input/input7/event7"
[    31.128] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    31.128] (**) Option "xkb_rules" "evdev"
[    31.128] (**) Option "xkb_model" "pc105"
[    31.128] (**) Option "xkb_layout" "tr"
[    31.128] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    31.128] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    31.128] (II) Using input driver 'evdev' for 'Power Button'
[    31.128] (**) Power Button: always reports core events
[    31.128] (**) evdev: Power Button: Device: "/dev/input/event2"
[    31.128] (--) evdev: Power Button: Vendor 0 Product 0x1
[    31.128] (--) evdev: Power Button: Found keys
[    31.128] (II) evdev: Power Button: Configuring as keyboard
[    31.129] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[    31.129] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    31.129] (**) Option "xkb_rules" "evdev"
[    31.129] (**) Option "xkb_model" "pc105"
[    31.129] (**) Option "xkb_layout" "tr"
[    31.129] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    31.129] (II) No input driver specified, ignoring this device.
[    31.129] (II) This device may have been added with another device file.
[    31.130] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[    31.130] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    31.130] (II) Using input driver 'evdev' for 'Sleep Button'
[    31.130] (**) Sleep Button: always reports core events
[    31.130] (**) evdev: Sleep Button: Device: "/dev/input/event0"
[    31.130] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    31.130] (--) evdev: Sleep Button: Found keys
[    31.130] (II) evdev: Sleep Button: Configuring as keyboard
[    31.130] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[    31.130] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    31.130] (**) Option "xkb_rules" "evdev"
[    31.130] (**) Option "xkb_model" "pc105"
[    31.130] (**) Option "xkb_layout" "tr"
[    31.130] (II) config/udev: Adding drm device (/dev/dri/card0)
[    31.131] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/event5)
[    31.131] (**) A4TECH USB Device: Applying InputClass "evdev keyboard catchall"
[    31.131] (II) Using input driver 'evdev' for 'A4TECH USB Device'
[    31.131] (**) A4TECH USB Device: always reports core events
[    31.131] (**) evdev: A4TECH USB Device: Device: "/dev/input/event5"
[    31.131] (--) evdev: A4TECH USB Device: Vendor 0x9da Product 0x54f
[    31.131] (--) evdev: A4TECH USB Device: Found 1 mouse buttons
[    31.131] (--) evdev: A4TECH USB Device: Found scroll wheel(s)
[    31.131] (--) evdev: A4TECH USB Device: Found relative axes
[    31.131] (--) evdev: A4TECH USB Device: Found absolute axes
[    31.131] (--) evdev: A4TECH USB Device: Found absolute multitouch axes
[    31.131] (--) evdev: A4TECH USB Device: Found x and y absolute axes
[    31.131] (--) evdev: A4TECH USB Device: Found keys
[    31.131] (II) evdev: A4TECH USB Device: Forcing relative x/y axes to exist.
[    31.131] (II) evdev: A4TECH USB Device: Configuring as mouse
[    31.131] (II) evdev: A4TECH USB Device: Configuring as keyboard
[    31.131] (II) evdev: A4TECH USB Device: Adding scrollwheel support
[    31.131] (**) evdev: A4TECH USB Device: YAxisMapping: buttons 4 and 5
[    31.131] (**) evdev: A4TECH USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    31.131] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.0/input/input5/event5"
[    31.131] (II) XINPUT: Adding extended input device "A4TECH USB Device" (type: KEYBOARD, id 10)
[    31.131] (**) Option "xkb_rules" "evdev"
[    31.131] (**) Option "xkb_model" "pc105"
[    31.131] (**) Option "xkb_layout" "tr"
[    31.132] (II) evdev: A4TECH USB Device: initialized for relative axes.
[    31.132] (WW) evdev: A4TECH USB Device: ignoring absolute axes.
[    31.132] (**) A4TECH USB Device: (accel) keeping acceleration scheme 1
[    31.132] (**) A4TECH USB Device: (accel) acceleration profile 0
[    31.132] (**) A4TECH USB Device: (accel) acceleration factor: 2.000
[    31.132] (**) A4TECH USB Device: (accel) acceleration threshold: 4
[    31.132] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/js0)
[    31.132] (II) No input driver specified, ignoring this device.
[    31.132] (II) This device may have been added with another device file.
[    31.133] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/event6)
[    31.133] (**) A4TECH USB Device: Applying InputClass "evdev pointer catchall"
[    31.133] (II) Using input driver 'evdev' for 'A4TECH USB Device'
[    31.133] (**) A4TECH USB Device: always reports core events
[    31.133] (**) evdev: A4TECH USB Device: Device: "/dev/input/event6"
[    31.133] (--) evdev: A4TECH USB Device: Vendor 0x9da Product 0x54f
[    31.133] (--) evdev: A4TECH USB Device: Found 20 mouse buttons
[    31.133] (--) evdev: A4TECH USB Device: Found scroll wheel(s)
[    31.133] (--) evdev: A4TECH USB Device: Found relative axes
[    31.133] (--) evdev: A4TECH USB Device: Found x and y relative axes
[    31.133] (II) evdev: A4TECH USB Device: Configuring as mouse
[    31.133] (II) evdev: A4TECH USB Device: Adding scrollwheel support
[    31.133] (**) evdev: A4TECH USB Device: YAxisMapping: buttons 4 and 5
[    31.133] (**) evdev: A4TECH USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    31.133] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.1/input/input6/event6"
[    31.133] (II) XINPUT: Adding extended input device "A4TECH USB Device" (type: MOUSE, id 11)
[    31.133] (II) evdev: A4TECH USB Device: initialized for relative axes.
[    31.133] (**) A4TECH USB Device: (accel) keeping acceleration scheme 1
[    31.133] (**) A4TECH USB Device: (accel) acceleration profile 0
[    31.133] (**) A4TECH USB Device: (accel) acceleration factor: 2.000
[    31.133] (**) A4TECH USB Device: (accel) acceleration threshold: 4
[    31.134] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/mouse0)
[    31.134] (II) No input driver specified, ignoring this device.
[    31.134] (II) This device may have been added with another device file.
[    31.134] (II) config/udev: Adding input device LG Webcam (/dev/input/event8)
[    31.134] (**) LG Webcam: Applying InputClass "evdev keyboard catchall"
[    31.134] (II) Using input driver 'evdev' for 'LG Webcam'
[    31.134] (**) LG Webcam: always reports core events
[    31.134] (**) evdev: LG Webcam: Device: "/dev/input/event8"
[    31.134] (--) evdev: LG Webcam: Vendor 0xc45 Product 0x62c0
[    31.134] (--) evdev: LG Webcam: Found keys
[    31.134] (II) evdev: LG Webcam: Configuring as keyboard
[    31.134] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.5/usb1/1-9/1-9:1.0/input/input8/event8"
[    31.134] (II) XINPUT: Adding extended input device "LG Webcam" (type: KEYBOARD, id 12)
[    31.134] (**) Option "xkb_rules" "evdev"
[    31.134] (**) Option "xkb_model" "pc105"
[    31.134] (**) Option "xkb_layout" "tr"
[    31.135] (II) config/udev: Adding input device HDA ATI SB Mic (/dev/input/event10)
[    31.135] (II) No input driver specified, ignoring this device.
[    31.135] (II) This device may have been added with another device file.
[    31.135] (II) config/udev: Adding input device HDA ATI SB Headphone (/dev/input/event11)
[    31.135] (II) No input driver specified, ignoring this device.
[    31.135] (II) This device may have been added with another device file.
[    31.136] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[    31.136] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    31.136] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    31.136] (**) AT Translated Set 2 keyboard: always reports core events
[    31.136] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[    31.136] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    31.136] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    31.136] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    31.136] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[    31.136] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[    31.136] (**) Option "xkb_rules" "evdev"
[    31.136] (**) Option "xkb_model" "pc105"
[    31.136] (**) Option "xkb_layout" "tr"
[    31.137] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
[    31.137] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    31.137] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    31.137] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    31.137] (II) LoadModule: "synaptics"
[    31.137] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    31.137] (II) Module synaptics: vendor="X.Org Foundation"
[    31.137] compiled for 1.13.0, module version = 1.6.2
[    31.137] Module class: X.Org XInput Driver
[    31.137] ABI class: X.Org XInput driver, version 18.0
[    31.137] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    31.137] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    31.137] (**) Option "Device" "/dev/input/event9"
[    31.220] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[    31.220] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[    31.220] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    31.220] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    31.220] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    31.220] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    31.220] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    31.220] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    31.252] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input9/event9"
[    31.252] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
[    31.252] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    31.252] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[    31.252] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040
[    31.253] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    31.253] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    31.253] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    31.253] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    31.253] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    31.253] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[    31.253] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    42.672] (II) RADEON(0): EDID vendor "LPL", prod id 59392
[    42.672] (II) RADEON(0): Printing DDC gathered Modelines:
[    42.672] (II) RADEON(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz eP)
[    43.700] (II) RADEON(0): EDID vendor "LPL", prod id 59392
[    43.700] (II) RADEON(0): Printing DDC gathered Modelines:
[    43.700] (II) RADEON(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz eP)
[    45.458] (II) XKB: reuse xkmfile /var/lib/xkb/server-CF3F27E17B0AEC7956F3A5E53BE1426386745F01.xkm
[    45.784] (II) RADEON(0): EDID vendor "LPL", prod id 59392
[    45.784] (II) RADEON(0): Printing DDC gathered Modelines:
[    45.784] (II) RADEON(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz eP)
[    63.884] (II) RADEON(0): EDID vendor "LPL", prod id 59392
[    63.884] (II) RADEON(0): Printing DDC gathered Modelines:
[    63.884] (II) RADEON(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz eP)
[  1337.981] (II) RADEON(0): EDID vendor "LPL", prod id 59392
[  1337.999] (II) RADEON(0): Printing DDC gathered Modelines:
[  1337.999] (II) RADEON(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz eP)
[  1338.388] (II) RADEON(0): EDID vendor "LPL", prod id 59392
[  1338.388] (II) RADEON(0): Printing DDC gathered Modelines:
[  1338.388] (II) RADEON(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz eP)
[  1338.788] (II) RADEON(0): EDID vendor "LPL", prod id 59392
[  1338.788] (II) RADEON(0): Printing DDC gathered Modelines:
[  1338.788] (II) RADEON(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz eP)
[  1339.784] (II) RADEON(0): EDID vendor "LPL", prod id 59392
[  1339.784] (II) RADEON(0): Printing DDC gathered Modelines:
[  1339.784] (II) RADEON(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz eP)
[  1340.248] (II) RADEON(0): EDID vendor "LPL", prod id 59392
[  1340.248] (II) RADEON(0): Printing DDC gathered Modelines:
[  1340.248] (II) RADEON(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz eP)
[  1340.604] (II) RADEON(0): EDID vendor "LPL", prod id 59392
[  1340.604] (II) RADEON(0): Printing DDC gathered Modelines:
[  1340.604] (II) RADEON(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz eP)
[  1341.456] (II) RADEON(0): EDID vendor "LPL", prod id 59392
[  1341.456] (II) RADEON(0): Printing DDC gathered Modelines:
[  1341.456] (II) RADEON(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz eP)
[  1342.380] (II) RADEON(0): EDID vendor "LPL", prod id 59392
[  1342.380] (II) RADEON(0): Printing DDC gathered Modelines:
[  1342.380] (II) RADEON(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz eP)
An it harm none, do what ye will.

if

Burdan pek bir çıkmadı @lawubuntu. Bir de dmesg çıktısını alabilir miyim?

lawubuntu

Alıntı yapılan: if - 01 Eylül 2013 - 01:27:46
Burdan pek bir çıkmadı @lawubuntu. Bir de dmesg çıktısını alabilir miyim?

Buyrun:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.5.0-39-generic (buildd@komainu) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #60~precise1-Ubuntu SMP Wed Aug 14 15:28:09 UTC 2013 (Ubuntu 3.5.0-39.60~precise1-generic 3.5.7.17)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000ce000-0x00000000000cffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000dffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000037e7ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000037e80000-0x0000000037e97fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x0000000037e98000-0x0000000037e99fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000037e9a000-0x0000000037ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: LG Electronics R405-A.CPART/Lhotse-II, BIOS LHORSF09 10/02/2007
[    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x37e80 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FE0000000 write-back
[    0.000000]   1 base 020000000 mask FF0000000 write-back
[    0.000000]   2 base 030000000 mask FF8000000 write-back
[    0.000000]   3 base 037F00000 mask FFFF00000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 512MB, type WB
[    0.000000] reg 1, base: 512MB, range: 256MB, type WB
[    0.000000] reg 2, base: 768MB, range: 128MB, type WB
[    0.000000] reg 3, base: 895MB, range: 1MB, type UC
[    0.000000] total RAM covered: 895M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K chunk_size: 256M num_reg: 3  lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 1GB, type WB
[    0.000000] reg 1, base: 895MB, range: 1MB, type UC
[    0.000000] reg 2, base: 896MB, range: 128MB, type UC
[    0.000000] found SMP MP-table at [mem 0x000f7ec0-0x000f7ecf] mapped at [c00f7ec0]
[    0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[    0.000000] Base memory trampoline at [c0099000] 99000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x37bfdfff]
[    0.000000]  [mem 0x00000000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x379fffff] page 2M
[    0.000000]  [mem 0x37a00000-0x37bfdfff] page 4k
[    0.000000] kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff]
[    0.000000] RAMDISK: [mem 0x36240000-0x37117fff]
[    0.000000] ACPI: RSDP 000f7e90 00024 (v02 PTLTD )
[    0.000000] ACPI: XSDT 37e89e86 0006C (v01 LGE    LGPC     06040000  LTP 00000000)
[    0.000000] ACPI: TCPA 37e97c9c 00032 (v02 INTEL           06040000 PTEC 00000000)
[    0.000000] ACPI: FACP 37e97cce 000F4 (v03 ATI    Alfonsin 06040000 ATI  000F4240)
[    0.000000] ACPI: DSDT 37e8d774 0A4B4 (v01    LGE  LHOTSE2 06040000 MSFT 0100000E)
[    0.000000] ACPI: FACS 37e99fc0 00040
[    0.000000] ACPI: SLIC 37e97dc2 00176 (v01 LGE    LGPC     06040000 YSB  00000001)
[    0.000000] ACPI: APIC 37e97f38 00054 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
[    0.000000] ACPI: MCFG 37e97f8c 0003C (v01 PTLTD    MCFG   06040000  LTP 00000000)
[    0.000000] ACPI: HPET 37e97fc8 00038 (v01 PTLTD  HPETTBL  06040000  LTP 00000001)
[    0.000000] ACPI: SSDT 37e8b39d 0025F (v01  PmRef  Cpu0Tst 00003000 INTL 20050228)
[    0.000000] ACPI: SSDT 37e8b2f7 000A6 (v01  PmRef  Cpu1Tst 00003000 INTL 20050228)
[    0.000000] ACPI: SSDT 37e89ef2 01405 (v01  PmRef    CpuPm 00003000 INTL 20050228)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 2MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37bfe000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x37bfdfff]
[    0.000000]   HighMem  [mem 0x37bfe000-0x37e7ffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00010000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0x37e7ffff]
[    0.000000] On node 0 totalpages: 228877
[    0.000000] free_area_init_node: node 0, pgdat c18c6540, node_mem_map f74fd200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3949 pages, LIFO batch:0
[    0.000000]   Normal zone: 1752 pages used for memmap
[    0.000000]   Normal zone: 222502 pages, LIFO batch:31
[    0.000000]   HighMem zone: 6 pages used for memmap
[    0.000000]   HighMem zone: 636 pages, LIFO batch:0
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x8008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
[    0.000000] PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000
[    0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000dc000
[    0.000000] PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
[    0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[    0.000000] e820: [mem 0x38000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f74db000 s34176 r0 d23168 u57344
[    0.000000] pcpu-alloc: s34176 r0 d23168 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 227087
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-39-generic root=UUID=dd7518ff-9f59-44a3-924a-8c30c8fcb404 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Initializing CPU#0
[    0.000000] allocated 1831808 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (00037bfe:00037e80)
[    0.000000] Memory: 879644k/915968k available (6056k kernel code, 35864k reserved, 2980k data, 760k init, 2568k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff15000 - 0xfffff000   ( 936 kB)
[    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
[    0.000000]       .init : 0xc18d4000 - 0xc1992000   ( 760 kB)
[    0.000000]       .data : 0xc15ea215 - 0xc18d3440   (2980 kB)
[    0.000000]       .text : 0xc1000000 - 0xc15ea215   (6056 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:2304 nr_irqs:512 16
[    0.000000] CPU 0 irqstacks, hard=f5c08000 soft=f5c0a000
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1994.915 MHz processor.
[    0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.83 BogoMIPS (lpj=7979660)
[    0.004006] pid_max: default: 32768 minimum: 301
[    0.004030] Security Framework initialized
[    0.004045] AppArmor: AppArmor initialized
[    0.004047] Yama: becoming mindful.
[    0.004102] Mount-cache hash table entries: 512
[    0.004351] Initializing cgroup subsys cpuacct
[    0.004354] Initializing cgroup subsys memory
[    0.004362] Initializing cgroup subsys devices
[    0.004365] Initializing cgroup subsys freezer
[    0.004367] Initializing cgroup subsys blkio
[    0.004369] Initializing cgroup subsys perf_event
[    0.004402] CPU: Physical Processor ID: 0
[    0.004404] CPU: Processor Core ID: 0
[    0.004407] mce: CPU supports 6 MCE banks
[    0.004415] CPU0: Thermal monitoring enabled (TM2)
[    0.004419] using mwait in idle threads.
[    0.008920] ACPI: Core revision 20120320
[    0.016011] ftrace: allocating 27153 entries in 54 pages
[    0.028083] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.028467] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[    0.032001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[    0.032001] ...trying to set up timer (IRQ0) through the 8259A ...
[    0.032001] ..... (found apic 0 pin 0) ...
[    0.071935] ....... works.
[    0.071937] CPU0: Intel(R) Core(TM)2 Duo CPU     T7250  @ 2.00GHz stepping 0d
[    0.072003] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[    0.072003] PEBS disabled due to CPU errata.
[    0.072003] ... version:                2
[    0.072003] ... bit width:              40
[    0.072003] ... generic registers:      2
[    0.072003] ... value mask:             000000ffffffffff
[    0.072003] ... max period:             000000007fffffff
[    0.072003] ... fixed-purpose events:   3
[    0.072003] ... event mask:             0000000700000003
[    0.072003] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.072003] CPU 1 irqstacks, hard=f5ce8000 soft=f5cea000
[    0.072003] Booting Node   0, Processors  #1 Ok.
[    0.008000] Initializing CPU#1
[    0.080083] Brought up 2 CPUs
[    0.080089] Total of 2 processors activated (7979.66 BogoMIPS).
[    0.081571] devtmpfs: initialized
[    0.081571] EVM: security.selinux
[    0.081571] EVM: security.SMACK64
[    0.081571] EVM: security.capability
[    0.081571] PM: Registering ACPI NVS region [mem 0x37e98000-0x37e99fff] (8192 bytes)
[    0.084641] dummy:
[    0.084676] RTC time: 22:45:40, date: 08/31/13
[    0.084723] NET: Registered protocol family 16
[    0.084736] Trying to unpack rootfs image as initramfs...
[    0.084912] EISA bus registered
[    0.085008] ACPI: bus type pci registered
[    0.085078] PCI: MMCONFIG for domain 0000 [bus 00-0c] at [mem 0xe0000000-0xe0cfffff] (base 0xe0000000)
[    0.085082] PCI: MMCONFIG at [mem 0xe0000000-0xe0cfffff] reserved in E820
[    0.085084] PCI: Using MMCONFIG for extended config space
[    0.085086] PCI: Using configuration type 1 for base access
[    0.100122] bio: create slab <bio-0> at 0
[    0.100265] ACPI: Added _OSI(Module Device)
[    0.100268] ACPI: Added _OSI(Processor Device)
[    0.100270] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.100273] ACPI: Added _OSI(Processor Aggregator Device)
[    0.102232] ACPI: EC: Look up EC in DSDT
[    0.108115] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.113364] ACPI: SSDT 37e8bb99 0021F (v01  PmRef  Cpu0Ist 00003000 INTL 20050228)
[    0.113856] ACPI: Dynamic OEM Table Load:
[    0.113860] ACPI: SSDT   (null) 0021F (v01  PmRef  Cpu0Ist 00003000 INTL 20050228)
[    0.116251] ACPI: SSDT 37e8b5fc 00518 (v01  PmRef  Cpu0Cst 00003001 INTL 20050228)
[    0.116776] ACPI: Dynamic OEM Table Load:
[    0.116779] ACPI: SSDT   (null) 00518 (v01  PmRef  Cpu0Cst 00003001 INTL 20050228)
[    0.117211] ACPI: SSDT 37e8bdb8 001B0 (v01  PmRef  Cpu1Ist 00003000 INTL 20050228)
[    0.117707] ACPI: Dynamic OEM Table Load:
[    0.117711] ACPI: SSDT   (null) 001B0 (v01  PmRef  Cpu1Ist 00003000 INTL 20050228)
[    0.117930] ACPI: SSDT 37e8bb14 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20050228)
[    0.118407] ACPI: Dynamic OEM Table Load:
[    0.118410] ACPI: SSDT   (null) 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20050228)
[    0.340161] ACPI: Interpreter enabled
[    0.340181] ACPI: (supports S0 S3 S4 S5)
[    0.340212] ACPI: Using IOAPIC for interrupt routing
[    0.377921] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.380072] ACPI: Power Resource [CTHT] (off)
[    0.380311] ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62
[    0.380504] ACPI: No dock devices found.
[    0.380514] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.381098] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.382147] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.382151] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[    0.382154] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[    0.382158] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[    0.382161] pci_root PNP0A08:00: host bridge window [mem 0x38000000-0xdfffffff] (ignored)
[    0.382164] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xffffffff] (ignored)
[    0.382167] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.382170] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.382173] PCI: root bus 00: using default resources
[    0.382211] PCI host bridge to bus 0000:00
[    0.382215] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.382218] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[    0.382231] pci 0000:00:00.0: [1002:7930] type 00 class 0x060000
[    0.382285] pci 0000:00:01.0: [1002:7932] type 01 class 0x060400
[    0.382345] pci 0000:00:04.0: [1002:7934] type 01 class 0x060400
[    0.382409] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.382436] pci 0000:00:06.0: [1002:7936] type 01 class 0x060400
[    0.382499] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[    0.382524] pci 0000:00:07.0: [1002:7937] type 01 class 0x060400
[    0.384034] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[    0.384081] pci 0000:00:12.0: [1002:4380] type 00 class 0x01018f
[    0.384106] pci 0000:00:12.0: reg 10: [io  0x8438-0x843f]
[    0.384120] pci 0000:00:12.0: reg 14: [io  0x8444-0x8447]
[    0.384134] pci 0000:00:12.0: reg 18: [io  0x8430-0x8437]
[    0.384148] pci 0000:00:12.0: reg 1c: [io  0x8440-0x8443]
[    0.384161] pci 0000:00:12.0: reg 20: [io  0x8400-0x840f]
[    0.384175] pci 0000:00:12.0: reg 24: [mem 0xf8509000-0xf85093ff]
[    0.384204] pci 0000:00:12.0: set SATA to AHCI mode
[    0.384259] pci 0000:00:13.0: [1002:4387] type 00 class 0x0c0310
[    0.384278] pci 0000:00:13.0: reg 10: [mem 0xf8304000-0xf8304fff]
[    0.384374] pci 0000:00:13.1: [1002:4388] type 00 class 0x0c0310
[    0.384393] pci 0000:00:13.1: reg 10: [mem 0xf8305000-0xf8305fff]
[    0.384485] pci 0000:00:13.2: [1002:4389] type 00 class 0x0c0310
[    0.384504] pci 0000:00:13.2: reg 10: [mem 0xf8306000-0xf8306fff]
[    0.384596] pci 0000:00:13.3: [1002:438a] type 00 class 0x0c0310
[    0.384615] pci 0000:00:13.3: reg 10: [mem 0xf8307000-0xf8307fff]
[    0.384710] pci 0000:00:13.4: [1002:438b] type 00 class 0x0c0310
[    0.384730] pci 0000:00:13.4: reg 10: [mem 0xf8308000-0xf8308fff]
[    0.384832] pci 0000:00:13.5: [1002:4386] type 00 class 0x0c0320
[    0.384859] pci 0000:00:13.5: reg 10: [mem 0xf8509400-0xf85094ff]
[    0.384977] pci 0000:00:13.5: supports D1 D2
[    0.384980] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
[    0.385011] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.385036] pci 0000:00:14.0: reg 10: [io  0x8410-0x841f]
[    0.385132] pci 0000:00:14.1: [1002:438c] type 00 class 0x01018a
[    0.385151] pci 0000:00:14.1: reg 10: [io  0x01f0-0x01f7]
[    0.385165] pci 0000:00:14.1: reg 14: [io  0x03f4-0x03f7]
[    0.385178] pci 0000:00:14.1: reg 18: [io  0x0000-0x0007]
[    0.385192] pci 0000:00:14.1: reg 1c: [io  0x0000-0x0003]
[    0.385205] pci 0000:00:14.1: reg 20: [io  0x8420-0x842f]
[    0.385260] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.385290] pci 0000:00:14.2: reg 10: [mem 0xf8300000-0xf8303fff 64bit]
[    0.385385] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.385406] pci 0000:00:14.3: [1002:438d] type 00 class 0x060100
[    0.385516] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.385623] pci 0000:01:05.0: [1002:7942] type 00 class 0x030000
[    0.385641] pci 0000:01:05.0: reg 10: [mem 0xf0000000-0xf7ffffff 64bit pref]
[    0.385652] pci 0000:01:05.0: reg 18: [mem 0xf8000000-0xf800ffff 64bit]
[    0.385660] pci 0000:01:05.0: reg 20: [io  0x9000-0x90ff]
[    0.385697] pci 0000:01:05.0: supports D1 D2
[    0.385726] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.385734] pci 0000:00:01.0:   bridge window [io  0x9000-0x9fff]
[    0.385739] pci 0000:00:01.0:   bridge window [mem 0xf8000000-0xf80fffff]
[    0.385746] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
[    0.385811] pci 0000:02:00.0: [11ab:4353] type 00 class 0x020000
[    0.385835] pci 0000:02:00.0: reg 10: [mem 0xf8100000-0xf8103fff 64bit]
[    0.385848] pci 0000:02:00.0: reg 18: [io  0xa000-0xa0ff]
[    0.385960] pci 0000:02:00.0: supports D1 D2
[    0.385963] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.385981] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.385992] pci 0000:00:04.0: PCI bridge to [bus 02-04]
[    0.385998] pci 0000:00:04.0:   bridge window [io  0xa000-0xafff]
[    0.386003] pci 0000:00:04.0:   bridge window [mem 0xf8100000-0xf81fffff]
[    0.386050] pci 0000:00:06.0: PCI bridge to [bus 05-07]
[    0.386123] pci 0000:08:00.0: [168c:001c] type 00 class 0x020000
[    0.386147] pci 0000:08:00.0: reg 10: [mem 0xf8200000-0xf820ffff 64bit]
[    0.386285] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.386294] pci 0000:00:07.0: PCI bridge to [bus 08-0a]
[    0.386302] pci 0000:00:07.0:   bridge window [mem 0xf8200000-0xf82fffff]
[    0.386387] pci 0000:00:14.4: PCI bridge to [bus 0b-0d] (subtractive decode)
[    0.386400] pci 0000:00:14.4:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.386403] pci 0000:00:14.4:   bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[    0.386427] pci_bus 0000:00: on NUMA node 0
[    0.386431] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.386548] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
[    0.386614] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
[    0.386669] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT]
[    0.386772] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[    0.386787] ACPI Warning: For \_SB_.PCI0.P2P_._PRT: Return Package has no elements (empty) (20120320/nspredef-463)
[    0.386806] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[    0.386888]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.386892]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.386894] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.391906] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[    0.391963] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[    0.392016] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[    0.392077] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[    0.392129] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[    0.392182] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[    0.392239] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[    0.392292] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[    0.392431] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[    0.392436] vgaarb: loaded
[    0.392437] vgaarb: bridge control possible 0000:01:05.0
[    0.392700] SCSI subsystem initialized
[    0.392764] libata version 3.00 loaded.
[    0.392791] ACPI: bus type usb registered
[    0.392819] usbcore: registered new interface driver usbfs
[    0.392834] usbcore: registered new interface driver hub
[    0.392867] usbcore: registered new device driver usb
[    0.392977] PCI: Using ACPI for IRQ routing
[    0.393269] PCI: pci_cache_line_size set to 64 bytes
[    0.393369] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
[    0.393372] e820: reserve RAM buffer [mem 0x37e80000-0x37ffffff]
[    0.393495] NetLabel: Initializing
[    0.393497] NetLabel:  domain hash size = 128
[    0.393499] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.393516] NetLabel:  unlabeled traffic allowed by default
[    0.393645] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.393652] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[    0.395681] Switching to clocksource hpet
[    0.403065] AppArmor: AppArmor Filesystem Enabled
[    0.403125] pnp: PnP ACPI init
[    0.403147] ACPI: bus type pnp registered
[    0.404065] pnp 00:00: [bus 00-ff]
[    0.404070] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.404073] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.404076] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.404079] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.404082] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.404085] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.404088] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.404091] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.404094] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.404097] pnp 00:00: [mem 0x38000000-0xdfffffff window]
[    0.404100] pnp 00:00: [mem 0xf0000000-0xffffffff window]
[    0.404104] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.404107] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.404110] pnp 00:00: [io  0x0d00-0xffff window]
[    0.404193] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.404247] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[    0.404250] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[    0.404317] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.404321] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.404325] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.404779] pnp 00:02: [io  0x0000-0x001f]
[    0.404782] pnp 00:02: [io  0x0080-0x008f]
[    0.404785] pnp 00:02: [io  0x00c0-0x00df]
[    0.404790] pnp 00:02: [dma 4]
[    0.404837] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.404849] pnp 00:03: [io  0x00f0-0x00fe]
[    0.404863] pnp 00:03: [irq 13]
[    0.404916] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.404930] pnp 00:04: [io  0x0070-0x0071]
[    0.404936] pnp 00:04: [irq 8]
[    0.404983] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.404994] pnp 00:05: [io  0x0061]
[    0.405041] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.405054] pnp 00:06: [io  0x0060]
[    0.405057] pnp 00:06: [io  0x0064]
[    0.405063] pnp 00:06: [irq 1]
[    0.405123] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.405138] pnp 00:07: [irq 12]
[    0.405188] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 SYN1301 (active)
[    0.405205] pnp 00:08: [io  0x0022-0x0023]
[    0.405208] pnp 00:08: [io  0x002e-0x002f]
[    0.405211] pnp 00:08: [io  0x0072-0x0073]
[    0.405213] pnp 00:08: [io  0x1080]
[    0.405216] pnp 00:08: [io  0x00b0-0x00b1]
[    0.405219] pnp 00:08: [io  0x0092]
[    0.405221] pnp 00:08: [io  0x0220-0x022f]
[    0.405224] pnp 00:08: [io  0x040b]
[    0.405227] pnp 00:08: [io  0x04d0-0x04d1]
[    0.405229] pnp 00:08: [io  0x04d6]
[    0.405232] pnp 00:08: [io  0x0530-0x0537]
[    0.405234] pnp 00:08: [io  0x0c00-0x0c01]
[    0.405237] pnp 00:08: [io  0x0c14]
[    0.405240] pnp 00:08: [io  0x0c50-0x0c52]
[    0.405242] pnp 00:08: [io  0x0c6c]
[    0.405245] pnp 00:08: [io  0x0c6f]
[    0.405248] pnp 00:08: [io  0x0cd0-0x0cd1]
[    0.405250] pnp 00:08: [io  0x0cd2-0x0cd3]
[    0.405253] pnp 00:08: [io  0x0cd4-0x0cd5]
[    0.405256] pnp 00:08: [io  0x0cd6-0x0cd7]
[    0.405258] pnp 00:08: [io  0x0cd8-0x0cdf]
[    0.405261] pnp 00:08: [io  0x8000-0x805f]
[    0.405264] pnp 00:08: [io  0x8100-0x81ff window]
[    0.405267] pnp 00:08: [io  0x8210-0x821f]
[    0.405270] pnp 00:08: [io  0x0f40-0x0f47]
[    0.405272] pnp 00:08: [io  0x0280-0x0293]
[    0.405275] pnp 00:08: [io  0x087f]
[    0.405368] system 00:08: [io  0x1080] has been reserved
[    0.405372] system 00:08: [io  0x0220-0x022f] has been reserved
[    0.405375] system 00:08: [io  0x040b] has been reserved
[    0.405378] system 00:08: [io  0x04d0-0x04d1] has been reserved
[    0.405381] system 00:08: [io  0x04d6] has been reserved
[    0.405384] system 00:08: [io  0x0530-0x0537] has been reserved
[    0.405388] system 00:08: [io  0x0c00-0x0c01] has been reserved
[    0.405391] system 00:08: [io  0x0c14] has been reserved
[    0.405394] system 00:08: [io  0x0c50-0x0c52] has been reserved
[    0.405397] system 00:08: [io  0x0c6c] has been reserved
[    0.405400] system 00:08: [io  0x0c6f] has been reserved
[    0.405403] system 00:08: [io  0x0cd0-0x0cd1] has been reserved
[    0.405407] system 00:08: [io  0x0cd2-0x0cd3] has been reserved
[    0.405410] system 00:08: [io  0x0cd4-0x0cd5] has been reserved
[    0.405413] system 00:08: [io  0x0cd6-0x0cd7] has been reserved
[    0.405416] system 00:08: [io  0x0cd8-0x0cdf] has been reserved
[    0.405420] system 00:08: [io  0x8000-0x805f] has been reserved
[    0.405423] system 00:08: [io  0x8100-0x81ff window] has been reserved
[    0.405426] system 00:08: [io  0x8210-0x821f] has been reserved
[    0.405430] system 00:08: [io  0x0f40-0x0f47] has been reserved
[    0.405433] system 00:08: [io  0x0280-0x0293] has been reserved
[    0.405436] system 00:08: [io  0x087f] has been reserved
[    0.405441] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.405496] pnp 00:09: [mem 0x000e0000-0x000fffff]
[    0.405499] pnp 00:09: [mem 0xfff00000-0xffffffff]
[    0.405503] pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled]
[    0.405505] pnp 00:09: [mem 0xffb83020-0xffb8401f]
[    0.405581] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.405585] system 00:09: [mem 0xfff00000-0xffffffff] has been reserved
[    0.405589] system 00:09: [mem 0xffb83020-0xffb8401f] has been reserved
[    0.405593] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.405702] pnp 00:0a: [mem 0xfed00000-0xfed003ff]
[    0.405754] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.405790] pnp: PnP ACPI: found 11 devices
[    0.405793] ACPI: ACPI bus type pnp unregistered
[    0.405797] PnPBIOS: Disabled by ACPI PNP
[    0.436400] Freeing initrd memory: 15200k freed
[    0.442495] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.442516] pci 0000:00:01.0:   bridge window [io  0x9000-0x9fff]
[    0.442523] pci 0000:00:01.0:   bridge window [mem 0xf8000000-0xf80fffff]
[    0.442529] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
[    0.442537] pci 0000:00:04.0: PCI bridge to [bus 02-04]
[    0.442541] pci 0000:00:04.0:   bridge window [io  0xa000-0xafff]
[    0.442547] pci 0000:00:04.0:   bridge window [mem 0xf8100000-0xf81fffff]
[    0.442558] pci 0000:00:06.0: PCI bridge to [bus 05-07]
[    0.442570] pci 0000:00:07.0: PCI bridge to [bus 08-0a]
[    0.442577] pci 0000:00:07.0:   bridge window [mem 0xf8200000-0xf82fffff]
[    0.442587] pci 0000:00:14.4: PCI bridge to [bus 0b-0d]
[    0.442664] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.442667] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[    0.442671] pci_bus 0000:01: resource 0 [io  0x9000-0x9fff]
[    0.442674] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xf80fffff]
[    0.442677] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff 64bit pref]
[    0.442682] pci_bus 0000:02: resource 0 [io  0xa000-0xafff]
[    0.442685] pci_bus 0000:02: resource 1 [mem 0xf8100000-0xf81fffff]
[    0.442688] pci_bus 0000:08: resource 1 [mem 0xf8200000-0xf82fffff]
[    0.442692] pci_bus 0000:0b: resource 4 [io  0x0000-0xffff]
[    0.442695] pci_bus 0000:0b: resource 5 [mem 0x00000000-0xfffffffff]
[    0.442823] NET: Registered protocol family 2
[    0.443013] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.443456] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.445578] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.446632] TCP: Hash tables configured (established 131072 bind 65536)
[    0.446636] TCP: reno registered
[    0.446643] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.446681] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.446945] NET: Registered protocol family 1
[    0.447358] pci 0000:01:05.0: Boot video device
[    0.447375] PCI: CLS 32 bytes, default 64
[    0.448432] audit: initializing netlink socket (disabled)
[    0.448468] type=2000 audit(1377989139.444:1): initialized
[    0.475236] highmem bounce pool size: 64 pages
[    0.475253] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.477277] VFS: Disk quotas dquot_6.5.2
[    0.477337] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.478027] fuse init (API version 7.19)
[    0.478135] msgmni has been set to 1742
[    0.478636] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.478673] io scheduler noop registered
[    0.478676] io scheduler deadline registered (default)
[    0.478684] io scheduler cfq registered
[    0.478871] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
[    0.478970] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
[    0.479063] pcieport 0000:00:07.0: irq 42 for MSI/MSI-X
[    0.479150] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.479170] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.479300] efifb: probing for efifb
[    0.479304] efifb: cannot reserve video memory at 0xa6d60
[    0.479309] efifb: framebuffer at 0xa6d60, mapped to 0xc00a6d60, using 56k, total 64k
[    0.479311] efifb: mode is 640x350x1, linelength=80, pages=1
[    0.479313] efifb: scrolling: redraw
[    0.479316] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.479414] Console: switching to colour frame buffer device 80x43
[    0.479433] fb0: EFI VGA frame buffer device
[    0.479440] intel_idle: does not run on family 6 model 15
[    0.480340] ACPI: AC Adapter [AC] (on-line)
[    0.480422] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    0.480428] ACPI: Sleep Button [SLPB]
[    0.480484] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    0.480504] ACPI: Lid Switch [LID0]
[    0.480550] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    0.480554] ACPI: Power Button [PWRB]
[    0.480612] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.480616] ACPI: Power Button [PWRF]
[    0.480912] ACPI: Fan [FAN0] (off)
[    0.480983] ACPI: Requesting acpi_cpufreq
[    0.483284] Monitor-Mwait will be used to enter C-1 state
[    0.483298] Monitor-Mwait will be used to enter C-2 state
[    0.483307] Marking TSC unstable due to TSC halts in idle
[    0.483318] ACPI: acpi_idle registered with cpuidle
[    0.491128] thermal LNXTHERM:00: registered as thermal_zone0
[    0.491131] ACPI: Thermal Zone [TZ1] (40 C)
[    0.491152] ACPI: Battery Slot [CMB0] (battery present)
[    0.491190] GHES: HEST is not enabled!
[    0.491237] isapnp: Scanning for PnP cards...
[    0.491305] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.493960] Linux agpgart interface v0.103
[    0.495651] ACPI: Battery Slot [CMB0] (battery present)
[    0.496408] brd: module loaded
[    0.497236] loop: module loaded
[    0.497440] pata_acpi 0000:00:14.1: setting latency timer to 64
[    0.497786] Fixed MDIO Bus: probed
[    0.497844] tun: Universal TUN/TAP device driver, 1.6
[    0.497846] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.497889] PPP generic driver version 2.4.2
[    0.497937] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.497975] ehci_hcd 0000:00:13.5: EHCI Host Controller
[    0.497982] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
[    0.498006] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[    0.498024] ehci_hcd 0000:00:13.5: debug port 1
[    0.498052] ehci_hcd 0000:00:13.5: irq 19, io mem 0xf8509400
[    0.508023] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
[    0.508077] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.508080] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.508084] usb usb1: Product: EHCI Host Controller
[    0.508087] usb usb1: Manufacturer: Linux 3.5.0-39-generic ehci_hcd
[    0.508089] usb usb1: SerialNumber: 0000:00:13.5
[    0.508205] hub 1-0:1.0: USB hub found
[    0.508211] hub 1-0:1.0: 10 ports detected
[    0.508321] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.508353] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    0.508359] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[    0.508384] ohci_hcd 0000:00:13.0: irq 16, io mem 0xf8304000
[    0.564066] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    0.564069] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.564072] usb usb2: Product: OHCI Host Controller
[    0.564075] usb usb2: Manufacturer: Linux 3.5.0-39-generic ohci_hcd
[    0.564077] usb usb2: SerialNumber: 0000:00:13.0
[    0.564185] hub 2-0:1.0: USB hub found
[    0.564193] hub 2-0:1.0: 2 ports detected
[    0.564270] ohci_hcd 0000:00:13.1: OHCI Host Controller
[    0.564277] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[    0.564301] ohci_hcd 0000:00:13.1: irq 17, io mem 0xf8305000
[    0.620064] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.620067] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.620070] usb usb3: Product: OHCI Host Controller
[    0.620073] usb usb3: Manufacturer: Linux 3.5.0-39-generic ohci_hcd
[    0.620076] usb usb3: SerialNumber: 0000:00:13.1
[    0.620179] hub 3-0:1.0: USB hub found
[    0.620187] hub 3-0:1.0: 2 ports detected
[    0.620264] ohci_hcd 0000:00:13.2: OHCI Host Controller
[    0.620270] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[    0.620294] ohci_hcd 0000:00:13.2: irq 18, io mem 0xf8306000
[    0.676064] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.676067] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.676070] usb usb4: Product: OHCI Host Controller
[    0.676073] usb usb4: Manufacturer: Linux 3.5.0-39-generic ohci_hcd
[    0.676076] usb usb4: SerialNumber: 0000:00:13.2
[    0.676179] hub 4-0:1.0: USB hub found
[    0.676191] hub 4-0:1.0: 2 ports detected
[    0.676270] ohci_hcd 0000:00:13.3: OHCI Host Controller
[    0.676276] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
[    0.676291] ohci_hcd 0000:00:13.3: irq 17, io mem 0xf8307000
[    0.732066] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.732069] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.732072] usb usb5: Product: OHCI Host Controller
[    0.732075] usb usb5: Manufacturer: Linux 3.5.0-39-generic ohci_hcd
[    0.732078] usb usb5: SerialNumber: 0000:00:13.3
[    0.732180] hub 5-0:1.0: USB hub found
[    0.732188] hub 5-0:1.0: 2 ports detected
[    0.732265] ohci_hcd 0000:00:13.4: OHCI Host Controller
[    0.732271] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
[    0.732286] ohci_hcd 0000:00:13.4: irq 18, io mem 0xf8308000
[    0.788065] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    0.788068] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.788071] usb usb6: Product: OHCI Host Controller
[    0.788074] usb usb6: Manufacturer: Linux 3.5.0-39-generic ohci_hcd
[    0.788077] usb usb6: SerialNumber: 0000:00:13.4
[    0.788180] hub 6-0:1.0: USB hub found
[    0.788188] hub 6-0:1.0: 2 ports detected
[    0.788255] uhci_hcd: USB Universal Host Controller Interface driver
[    0.788338] usbcore: registered new interface driver libusual
[    0.788394] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[    0.794681] i8042: Detected active multiplexing controller, rev 1.1
[    0.796205] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.796211] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.796245] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.796272] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.796301] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.796415] mousedev: PS/2 mouse device common for all mice
[    0.796610] rtc_cmos 00:04: RTC can wake from S4
[    0.796746] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.796773] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[    0.796827] device-mapper: uevent: version 1.0.3
[    0.796897] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    0.796919] EISA: Probing bus 0 at eisa.0
[    0.796926] Cannot allocate resource for EISA slot 1
[    0.796955] Cannot allocate resource for EISA slot 8
[    0.796957] EISA: Detected 0 cards.
[    0.797002] cpuidle: using governor ladder
[    0.797052] cpuidle: using governor menu
[    0.797055] EFI Variables Facility v0.08 2004-May-17
[    0.797243] ashmem: initialized
[    0.797397] TCP: cubic registered
[    0.797522] NET: Registered protocol family 10
[    0.797742] NET: Registered protocol family 17
[    0.797756] Key type dns_resolver registered
[    0.797838] Using IPI No-Shortcut mode
[    0.797929] PM: Hibernation image not present or could not be loaded.
[    0.797943] registered taskstats version 1
[    0.800254] Key type trusted registered
[    0.802206] Key type encrypted registered
[    0.804519]   Magic number: 9:912:806
[    0.804623] rtc_cmos 00:04: setting system clock to 2013-08-31 22:45:41 UTC (1377989141)
[    0.805014] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.805016] EDD information not available.
[    0.805818] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    0.845059] isapnp: No Plug & Play device found
[    0.845155] Freeing unused kernel memory: 760k freed
[    0.845562] Write protecting the kernel text: 6060k
[    0.845589] Write protecting the kernel read-only data: 2476k
[    0.845591] NX-protecting the kernel data: 4180k
[    0.862585] udevd[90]: starting version 175
[    0.926403] sky2: driver version 1.30
[    0.926498] sky2 0000:02:00.0: Yukon-2 FE chip revision 3
[    0.926592] sky2 0000:02:00.0: irq 43 for MSI/MSI-X
[    0.926877] sky2 0000:02:00.0: eth0: addr 00:e0:91:34:42:af
[    0.952906] scsi0 : pata_atiixp
[    0.954466] scsi1 : pata_atiixp
[    0.955655] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8420 irq 14
[    0.955660] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8428 irq 15
[    0.955972] ahci 0000:00:12.0: version 3.0
[    0.956063] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[    0.956170] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    0.956175] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part ccc
[    0.961486] scsi2 : ahci
[    0.962815] scsi3 : ahci
[    0.964826] scsi4 : ahci
[    0.966125] scsi5 : ahci
[    0.966302] ata3: SATA max UDMA/133 abar m1024@0xf8509000 port 0xf8509100 irq 22
[    0.966307] ata4: SATA max UDMA/133 abar m1024@0xf8509000 port 0xf8509180 irq 22
[    0.966311] ata5: SATA max UDMA/133 abar m1024@0xf8509000 port 0xf8509200 irq 22
[    0.966315] ata6: SATA max UDMA/133 abar m1024@0xf8509000 port 0xf8509280 irq 22
[    1.044058] usb 1-9: new high-speed USB device number 4 using ehci_hcd
[    1.116524] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WH01, max UDMA/33
[    1.132446] ata1.00: configured for UDMA/33
[    1.137858] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T20N  WH01 PQ: 0 ANSI: 5
[    1.142768] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.142773] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.142929] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.143093] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.280940] usb 1-9: New USB device found, idVendor=0c45, idProduct=62c0
[    1.280947] usb 1-9: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    1.280952] usb 1-9: Product: LG Webcam
[    1.280957] usb 1-9: Manufacturer: LG Innotek
[    1.280961] usb 1-9: SerialNumber: 1.3.2.1.7
[    1.284047] ata4: SATA link down (SStatus 0 SControl 300)
[    1.288069] ata5: SATA link down (SStatus 0 SControl 300)
[    1.292066] ata6: SATA link down (SStatus 0 SControl 300)
[    1.456044] ata3: softreset failed (device not ready)
[    1.456049] ata3: applying PMP SRST workaround and retrying
[    1.544046] usb 3-1: new full-speed USB device number 2 using ohci_hcd
[    1.628056] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.628546] ata3.00: ATA-8: FUJITSU MHY2160BH, 0000000B, max UDMA/100
[    1.628553] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.628560] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[    1.629159] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[    1.629162] ata3.00: configured for UDMA/100
[    1.629309] scsi 2:0:0:0: Direct-Access     ATA      FUJITSU MHY2160B 0000 PQ: 0 ANSI: 5
[    1.629468] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.629497] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    1.629524] sd 2:0:0:0: [sda] Write Protect is off
[    1.629527] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.629651] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.704089]  sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[    1.704723] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.711063] usb 3-1: New USB device found, idVendor=09da, idProduct=054f
[    1.711068] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.711072] usb 3-1: Product: USB Device
[    1.711075] usb 3-1: Manufacturer: A4TECH
[    1.724150] usbcore: registered new interface driver usbhid
[    1.724154] usbhid: USB HID core driver
[    1.727454] input: A4TECH USB Device as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.0/input/input5
[    1.727600] hid-generic 0003:09DA:054F.0001: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:13.1-1/input0
[    1.728264] input: A4TECH USB Device as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.1/input/input6
[    1.728368] hid-generic 0003:09DA:054F.0002: input,hidraw1: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:13.1-1/input1
[    2.232054] usb 5-2: new full-speed USB device number 2 using ohci_hcd
[    2.297308] EXT4-fs (sda6): INFO: recovery required on readonly filesystem
[    2.297312] EXT4-fs (sda6): write access will be enabled during recovery
[    2.484067] usb 5-2: New USB device found, idVendor=0a12, idProduct=0001
[    2.484072] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.540055] usb 1-2: new high-speed USB device number 5 using ehci_hcd
[    3.674388] usb 1-2: New USB device found, idVendor=12d1, idProduct=1520
[    3.674397] usb 1-2: New USB device strings: Mfr=3, Product=2, SerialNumber=0
[    3.674402] usb 1-2: Product: HUAWEI Mobile
[    3.674407] usb 1-2: Manufacturer: HUAWEI Technology
[    3.677672] Initializing USB Mass Storage driver...
[    3.677812] scsi6 : usb-storage 1-2:1.0
[    3.677900] usbcore: registered new interface driver usb-storage
[    3.677903] USB Mass Storage support registered.
[    4.677191] scsi 6:0:0:0: CD-ROM            Vodafone CD ROM (Huawei)  2.31 PQ: 0 ANSI: 2
[    4.679908] sr1: scsi-1 drive
[    4.680161] sr 6:0:0:0: Attached scsi CD-ROM sr1
[    4.680260] sr 6:0:0:0: Attached scsi generic sg2 type 5
[    6.246618] EXT4-fs (sda6): orphan cleanup on readonly fs
[    6.246629] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 709095
[    6.246668] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 304383
[    6.260321] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 301238
[    6.260418] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 186559
[    6.260452] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 188827
[    6.260482] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 188838
[    6.260590] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 188844
[    6.260638] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 188842
[    6.260657] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 188840
[    6.260696] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 268036
[    6.287069] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 266694
[    6.295448] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 261244
[    6.295473] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 266574
[    6.295494] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 725313
[    6.295514] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 266571
[    6.295544] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 266386
[    6.305980] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 266578
[    6.306013] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 266570
[    6.306044] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 266513
[    6.306076] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 186581
[    6.321825] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 304560
[    6.339630] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 709062
[    6.358877] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 184403
[    6.361440] EXT4-fs (sda6): 23 orphan inodes deleted
[    6.361445] EXT4-fs (sda6): recovery complete
[    6.568749] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   26.831996] Adding 913404k swap on /dev/sda7.  Priority:-1 extents:1 across:913404k
[   27.084394] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   27.193566] udevd[362]: starting version 175
[   27.350396] lp: driver loaded but no devices found
[   27.375383] usbcore: registered new interface driver usbserial
[   27.375403] usbcore: registered new interface driver usbserial_generic
[   27.375417] USB Serial support registered for generic
[   27.375425] usbserial: USB Serial Driver core
[   27.897383] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   27.905536] wmi: Mapper loaded
[   27.971799] Bluetooth: Core ver 2.16
[   27.972712] NET: Registered protocol family 31
[   27.972716] Bluetooth: HCI device and connection manager initialized
[   27.972719] Bluetooth: HCI socket layer initialized
[   27.972721] Bluetooth: L2CAP socket layer initialized
[   27.972728] Bluetooth: SCO socket layer initialized
[   27.977300] usbcore: registered new interface driver btusb
[   28.002089] cfg80211: Calling CRDA to update world regulatory domain
[   28.065538] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[   28.083703] acpi device:1f: registered as cooling_device3
[   28.085343] microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa1
[   28.095322] ACPI: Video Device [VGA] (multi-head: yes  rom: yes  post: no)
[   28.095498] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1d/LNXVIDEO:00/input/input7
[   28.098978] type=1400 audit(1377978368.790:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=564 comm="apparmor_parser"
[   28.099493] type=1400 audit(1377978368.790:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=564 comm="apparmor_parser"
[   28.099780] type=1400 audit(1377978368.790:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=564 comm="apparmor_parser"
[   28.206637] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8410, revision 0
[   28.212863] [drm] Initialized drm 1.1.0 20060810
[   28.353540] Linux video capture interface: v2.00
[   28.370599] uvcvideo: Found UVC 1.00 device LG Webcam (0c45:62c0)
[   28.374305] sp5100_tco: SP5100 TCO WatchDog Timer Driver v0.01
[   28.374406] sp5100_tco: mmio address 0xfec000f0 already in use
[   28.379428] input: LG Webcam as /devices/pci0000:00/0000:00:13.5/usb1/1-9/1-9:1.0/input/input8
[   28.379844] usbcore: registered new interface driver uvcvideo
[   28.379848] USB Video Class driver (1.1.1)
[   28.502326] ath5k 0000:08:00.0: registered as 'phy0'
[   28.563545] microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa1
[   28.565973] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   28.573609] kvm: disabled by bios
[   28.598139] kvm: disabled by bios
[   28.668756] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[   28.682339] [drm] radeon defaulting to kernel modesetting.
[   28.682343] [drm] radeon kernel modesetting enabled.
[   28.683719] checking generic (a6d60 e000) vs hw (f0000000 8000000)
[   28.684102] [drm] initializing kernel modesetting (RS600 0x1002:0x7942 0x1854:0x0123).
[   28.684126] [drm] register mmio base: 0xF8000000
[   28.684128] [drm] register mmio size: 65536
[   28.684248] ATOM BIOS: ATI
[   28.684270] radeon 0000:01:05.0: VRAM: 128M 0x0000000038000000 - 0x000000003FFFFFFF (128M used)
[   28.684274] radeon 0000:01:05.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[   28.685570] [drm] Detected VRAM RAM=128M, BAR=128M
[   28.685575] [drm] RAM width 128bits DDR
[   28.686222] [TTM] Zone  kernel: Available graphics memory: 446518 kiB
[   28.686226] [TTM] Zone highmem: Available graphics memory: 447802 kiB
[   28.686228] [TTM] Initializing pool allocator
[   28.686234] [TTM] Initializing DMA pool allocator
[   28.686264] [drm] radeon: 128M of VRAM memory ready
[   28.686266] [drm] radeon: 512M of GTT memory ready.
[   28.686287] [drm] GART: num cpu pages 131072, num gpu pages 131072
[   28.688201] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[   28.689890] [drm] PCIE GART of 512M enabled (table at 0x0000000038040000).
[   28.691065] radeon 0000:01:05.0: WB enabled
[   28.691070] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x0000000040000000 and cpu addr 0xda3be000
[   28.691074] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   28.691076] [drm] Driver supports precise vblank timestamp query.
[   28.691091] [drm] radeon: irq initialized.
[   28.691442] [drm] Loading RS600 Microcode
[   28.704515] [drm] radeon: ring at 0x0000000040001000
[   28.704540] [drm] ring test succeeded in 0 usecs
[   28.704700] [drm] ib test succeeded in 0 usecs
[   28.715440] psmouse serio2: synaptics: Touchpad model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x200000/0x0
[   28.728023] [drm] radeon atom DIG backlight initialized
[   28.728028] [drm] Radeon Display Connectors
[   28.728030] [drm] Connector 0:
[   28.728033] [drm]   VGA-1
[   28.728036] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[   28.728038] [drm]   Encoders:
[   28.728040] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   28.728042] [drm] Connector 1:
[   28.728045] [drm]   LVDS-1
[   28.728047] [drm]   DDC: 0x7e40 0x7e50 0x7e44 0x7e54 0x7e48 0x7e58 0x7e4c 0x7e5c
[   28.728049] [drm]   Encoders:
[   28.728051] [drm]     LCD1: INTERNAL_LVTM1
[   28.728053] [drm] Connector 2:
[   28.728055] [drm]   SVIDEO-1
[   28.728059] [drm]   Encoders:
[   28.728061] [drm]     TV1: INTERNAL_KLDSCP_DAC1
[   28.760640] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input9
[   28.803197] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[   28.803401] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[   28.819817] cfg80211: World regulatory domain updated:
[   28.819822] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   28.819825] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   28.819828] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   28.819830] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   28.819833] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   28.819835] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   29.066315] ath: EEPROM regdomain: 0x60
[   29.066320] ath: EEPROM indicates we should expect a direct regpair map
[   29.066323] ath: Country alpha2 being used: 00
[   29.066325] ath: Regpair used: 0x60
[   29.066329] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   29.066332] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   29.066335] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   29.066337] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   29.066340] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   29.066342] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   29.066344] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   29.066347] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   29.066349] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   29.066352] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   29.066354] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   29.066357] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   29.066359] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   29.066361] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   29.066364] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   29.066366] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   29.066368] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   29.066371] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   29.066373] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   29.066376] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   29.066378] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   29.066380] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   29.066383] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   29.066385] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   29.066388] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   29.066390] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   29.066392] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[   29.066395] cfg80211: 2474000 KHz - 2494000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   29.066534] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[   29.069842] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   29.070402] Registered led device: ath5k-phy0::rx
[   29.070460] Registered led device: ath5k-phy0::tx
[   29.070472] ath5k: phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[   29.208558] init: failsafe main process (822) killed by TERM signal
[   29.366300] [drm] fb mappable at 0xF0140000
[   29.366304] [drm] vram apper at 0xF0000000
[   29.366306] [drm] size 4096000
[   29.366308] [drm] fb depth is 24
[   29.366310] [drm]    pitch is 5120
[   29.366315] checking generic (a6d60 e000) vs hw (f0000000 8000000)
[   29.366422] fbcon: radeondrmfb (fb1) is primary device
[   29.366424] fbcon: Remapping primary device, fb1, to tty 1-63
[   29.390570] ppdev: user-space parallel port driver
[   29.428302] Bluetooth: RFCOMM TTY layer initialized
[   29.428307] Bluetooth: RFCOMM socket layer initialized
[   29.428308] Bluetooth: RFCOMM ver 1.11
[   29.453623] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   29.453625] Bluetooth: BNEP filters: protocol multicast
[   29.458259] type=1400 audit(1377978370.150:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=941 comm="apparmor_parser"
[   29.458878] type=1400 audit(1377978370.150:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=941 comm="apparmor_parser"
[   29.481726] type=1400 audit(1377978370.174:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=950 comm="apparmor_parser"
[   29.483199] type=1400 audit(1377978370.174:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=950 comm="apparmor_parser"
[   29.483485] type=1400 audit(1377978370.174:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=950 comm="apparmor_parser"
[   29.488179] type=1400 audit(1377978370.182:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=949 comm="apparmor_parser"
[   29.488604] type=1400 audit(1377978370.182:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=949 comm="apparmor_parser"
[   29.596239] sky2 0000:02:00.0: eth0: enabling interface
[   29.596526] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   29.597254] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   29.610285] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   29.610967] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   29.837750] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   30.113490] fb1: radeondrmfb frame buffer device
[   30.113492] drm: registered panic notifier
[   30.113724] [drm] Initialized radeon 2.18.0 20080528 for 0000:01:05.0 on minor 0
[   30.150701] usb 1-2: USB disconnect, device number 5
[   34.592064] usb 1-2: new high-speed USB device number 6 using ehci_hcd
[   34.726651] usb 1-2: New USB device found, idVendor=12d1, idProduct=1465
[   34.726658] usb 1-2: New USB device strings: Mfr=4, Product=3, SerialNumber=0
[   34.726661] usb 1-2: Product: HUAWEI Mobile
[   34.726664] usb 1-2: Manufacturer: HUAWEI Technology
[   34.734240] scsi7 : usb-storage 1-2:1.5
[   34.734540] scsi8 : usb-storage 1-2:1.6
[   34.780298] usbcore: registered new interface driver option
[   34.780322] USB Serial support registered for GSM modem (1-port)
[   34.780437] option 1-2:1.0: GSM modem (1-port) converter detected
[   34.783351] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB0
[   34.783409] option 1-2:1.3: GSM modem (1-port) converter detected
[   34.783566] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB1
[   34.783582] option 1-2:1.4: GSM modem (1-port) converter detected
[   34.783694] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB2
[   34.804421] cdc_ether 1-2:1.1: wwan0: register 'cdc_ether' at usb-0000:00:13.5-2, Mobile Broadband Network Device, 02:50:f3:00:00:00
[   34.805353] usbcore: registered new interface driver cdc_ether
[   35.733567] scsi 7:0:0:0: CD-ROM            Vodafone CD ROM (Huawei)  2.31 PQ: 0 ANSI: 2
[   35.735329] scsi 8:0:0:0: Direct-Access     Vodafone Storage (Huawei) 2.31 PQ: 0 ANSI: 2
[   35.738040] sr1: scsi-1 drive
[   35.739138] sr 7:0:0:0: Attached scsi CD-ROM sr1
[   35.741783] sr 7:0:0:0: Attached scsi generic sg2 type 5
[   35.744698] sd 8:0:0:0: Attached scsi generic sg3 type 0
[   35.748807] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[   36.854268] wlan0: Creating new IBSS network, BSSID 46:44:ae:28:db:b3
[   36.872606] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   37.998500] ip_tables: (C) 2000-2006 Netfilter Core Team
[   38.012218] nf_conntrack version 0.5.0 (13993 buckets, 55972 max)
[   41.564838] init: plymouth-stop pre-start process (2099) terminated with status 1
[   76.063290] PPP BSD Compression module registered
[   76.135141] PPP Deflate Compression module registered
[  330.042237] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[  361.085247] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[  392.156173] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[  423.273761] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[  454.344215] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[  454.765051] CE: hpet increased min_delta_ns to 20113 nsec
[  485.462233] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[  516.505234] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[  547.548302] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[  578.617798] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[  609.736778] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[  640.805810] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[  671.925276] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[  702.993814] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[  734.139083] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[  765.181823] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[  796.224602] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[  827.369804] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[  858.490696] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[  889.557793] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[  920.679228] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[  951.722203] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[  982.788562] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1013.910707] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1044.953814] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1075.996712] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1107.014412] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1138.090731] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1169.117953] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1200.247608] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1231.377265] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1262.506896] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1293.534160] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1324.561389] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1355.588613] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1386.698447] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1417.745466] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1448.855792] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1479.902350] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1511.032027] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1542.161653] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1573.375427] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1604.422751] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1635.532879] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1666.662776] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1697.792682] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1728.922567] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1760.052537] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1791.173872] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1822.414734] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1853.544615] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1884.674548] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1915.906842] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1947.036727] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 1978.166619] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 2009.399006] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 2040.528905] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 2071.658802] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 2102.891072] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 2134.021019] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 2165.458156] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 2196.588074] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 2227.820316] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 2258.950278] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 2290.182569] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 2321.312474] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 2352.442345] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 2383.777075] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 2414.804593] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 2445.934625] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 2476.961961] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 2508.091935] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 2539.149107] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 2570.176338] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 2601.203612] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 2632.230826] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 2663.258055] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 2694.387730] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 2725.414966] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 2756.544620] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 2787.655787] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 2818.701520] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 2849.831188] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 2880.960846] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 2911.988131] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 2943.117740] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 2974.247431] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 3005.351279] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 3036.583569] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 3067.636431] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 3098.663723] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 3129.690973] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 3160.718283] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 3191.847965] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 3222.977726] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 3254.125761] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 3285.213241] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 3316.240737] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 3347.291521] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 3378.318790] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 3409.346047] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 3440.373322] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 3471.400586] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 3496.668706] wlan0: Trigger new scan to find an IBSS to join
[ 3499.765472] wlan0: Trigger new scan to find an IBSS to join
[ 3502.837473] wlan0: Trigger new scan to find an IBSS to join
[ 3503.868382] wlan0: Creating new IBSS network, BSSID 92:33:f2:b8:e3:43
[ 3533.959839] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 3564.971595] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 3596.085708] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 3627.097448] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 3658.214864] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 3689.242152] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 3720.269433] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 3751.296734] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 3782.323994] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 3813.351264] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 3844.378540] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 3875.508224] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 3906.535511] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 3937.562768] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 3968.590027] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 3999.701398] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 4030.746982] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 4033.819018] wlan0: Trigger new scan to find an IBSS to join
[ 4036.843289] wlan0: Trigger new scan to find an IBSS to join
[ 4038.017426] wlan0: Creating new IBSS network, BSSID 0e:cd:43:92:13:f0
[ 4067.886740] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 4078.264631] wlan0: Trigger new scan to find an IBSS to join
[ 4081.347264] wlan0: Trigger new scan to find an IBSS to join
[ 4084.420772] wlan0: Trigger new scan to find an IBSS to join
[ 4085.452456] wlan0: Creating new IBSS network, BSSID 6e:03:94:9b:86:70
[ 5977.100463] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 6008.127822] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 6039.257557] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 6070.284926] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 6101.312266] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 6132.408143] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 6163.435715] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 6194.463432] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 6225.491089] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 6256.551392] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 6287.648818] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 6318.708501] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 6349.735808] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 6380.763173] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 6411.790559] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 6442.889761] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 6473.947606] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 6504.974946] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 6536.002302] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 6567.029715] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 6598.057015] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 6629.084428] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 6660.111716] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 6691.139060] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 6722.268795] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 6753.296166] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 6784.399698] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 6815.427428] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 6846.484055] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 6877.507932] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 6908.535260] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 6939.640876] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 6970.692347] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 7001.822105] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 7032.951843] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 7064.059129] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 7095.108942] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 7126.238694] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 7157.347283] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 7188.395726] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 7219.525481] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 7250.655219] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 7281.784965] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 7312.812296] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 7343.839595] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 7374.969442] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 7406.081441] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 7437.211601] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 7468.256119] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 7499.369579] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 7530.515719] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 7561.527514] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 7592.657651] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 7623.802488] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 7654.918050] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 7686.048215] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 7717.191561] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 7748.321308] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 7779.438775] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 7810.568945] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 7841.699097] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 7872.829339] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 7903.959504] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 7935.089671] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 7966.219859] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 7997.359081] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 8028.488783] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 8059.618500] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 8090.748236] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 8121.877921] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 8153.000971] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 8184.137366] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 8215.267082] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 8246.391557] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 8277.521731] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 8308.651902] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 8309.177630] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
[ 8339.782068] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 8370.912308] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 8402.042484] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 8433.175040] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 8464.302825] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 8495.434456] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 8526.564164] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 8557.693880] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 8588.823587] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 8619.953354] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 8651.082991] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 8682.212713] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 8713.342431] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 8744.472128] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 8775.601838] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 8806.731527] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 8837.861235] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 8868.990938] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 8900.064694] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 8931.147924] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 8962.277644] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 8993.407346] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 9024.537038] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 9055.666732] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 9086.796436] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 9117.926142] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 9149.055862] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 9180.185575] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 9211.315264] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 9242.444948] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 9273.574644] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 9304.704336] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 9335.744175] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 9366.861327] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
An it harm none, do what ye will.

if

@lawubuntu, burdan da bir şey çıkmadı. Bilgisayarınızın marka ve modelini alabilir miyim? Kullandığınız ekran nedir?

wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) sorunu için yeni bir konu açın, ona da bakalım.

Şu saatte sorun çözecek derman kalmadığından sonra devam ederiz.