herkese iyi günler. Bilgisayarımda amd 7670m(2gb) ve 7660g(512mb) iki ekran kartı mevcut fakat ne yaparsam yapayım 7670m i kullanamıyorum driverlerini güncelledim fakat olmadı bilenler lütfen yardım etsin.
lspci
lsmod
dpkg -l | grep fglrx
çıktılarını buraya kod etiketi içinde geçin.
lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Complex
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Trinity [Radeon HD 7660G]
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Trinity HDMI Audio Controller
00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Port
00:06.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Port
00:07.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Port
00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 03)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode]
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 14)
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] FCH PCI Bridge (rev 40)
00:14.7 SD Host controller: Advanced Micro Devices, Inc. [AMD] FCH SD Flash Controller
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 5
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Thames [Radeon HD 7500M/7600M Series]
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
03:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)
lsmod
Module Size Used by
rfcomm 69160 8
bnep 19624 2
binfmt_misc 17468 1
uvcvideo 80885 0
videobuf2_vmalloc 13216 1 uvcvideo
videobuf2_memops 13362 1 videobuf2_vmalloc
videobuf2_core 40664 1 uvcvideo
kvm_amd 59987 0
hid_generic 12548 0
videodev 134688 2 uvcvideo,videobuf2_core
kvm 451511 1 kvm_amd
rts5139 335409 0
fglrx 8085343 179
btusb 32412 0
bluetooth 395423 22 bnep,btusb,rfcomm
crct10dif_pclmul 14289 0
crc32_pclmul 13113 0
usbhid 52570 0
ghash_clmulni_intel 13216 0
hid 106148 3 hid_generic,usbhid
lib80211_crypt_tkip 17619 0
aesni_intel 55624 0
wl 4207846 0
aes_x86_64 17131 1 aesni_intel
lrw 13286 1 aesni_intel
gf128mul 14951 1 lrw
snd_hda_codec_realtek 61438 1
snd_hda_codec_hdmi 46207 1
snd_hda_intel 52355 5
snd_hda_codec 192906 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep 13602 1 snd_hda_codec
snd_pcm 102099 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
glue_helper 13990 1 aesni_intel
ablk_helper 13597 1 aesni_intel
cryptd 20359 3 ghash_clmulni_intel,aesni_intel,ablk_helper
nls_iso8859_1 12713 1
lib80211 14381 2 wl,lib80211_crypt_tkip
snd_page_alloc 18710 2 snd_pcm,snd_hda_intel
snd_seq_midi 13324 0
snd_seq_midi_event 14899 1 snd_seq_midi
snd_rawmidi 30144 1 snd_seq_midi
cfg80211 484040 1 wl
snd_seq 61560 2 snd_seq_midi_event,snd_seq_midi
snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi
joydev 17381 0
serio_raw 13462 0
k10temp 13126 0
i2c_piix4 22155 0
snd_timer 29482 2 snd_pcm,snd_seq
snd 69238 21 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi
soundcore 12680 1 snd
ideapad_laptop 18216 0
wmi 19177 0
amd_iommu_v2 19054 1 fglrx
video 19476 0
sparse_keymap 13948 1 ideapad_laptop
mac_hid 13205 0
parport_pc 32701 0
ppdev 17671 0
lp 17759 0
parport 42348 3 lp,ppdev,parport_pc
psmouse 102222 0
sdhci_pci 23172 0
sdhci 43015 1 sdhci_pci
ahci 25819 3
r8169 67581 0
libahci 32168 1 ahci
mii 13934 1 r8169
dpkg -l | grep fglrx
ii fglrx 2:13.350.1-0ubuntu2 amd64 Video driver for the AMD graphics accelerators
ii fglrx-amdcccle 2:13.350.1-0ubuntu2 amd64 Catalyst Control Center for the AMD graphics accelerators
buyrun hocam
AMD yönetim panelinden kartlar arası geçişi sağlayamıyor musunuz? amdconfig --pxl
çıktısına bakayım.
No layout section was found in the file: '/etc/X11/xorg.conf'.
Please run 'aticonfig --initial' first or modify your configuration file manually and run aticonfig again.
amdconfig: parsing the command-line failed.
sudo aticonfig --initial
verdiğin komutu yazıp tekrar amdconfig -pxl i yazdım
PowerXpress: Discrete GPU is active (High-Performance mode).
çıktısı
sudo amdconfig --px-igpu
ile diğer kart seçilecektir.
böyle bi çıktı aldım PowerXpress: Integrated GPU is selected (Power-Saving mode), please restart Xserver(s) for changes to take effect!
Oturumu kapatıp tekrar açın.
oturumu kapatıp tekrar açtım fakat amd catalyst control centerde hala seçili olarak 7660g gösteriyor ve diğer ekran kartını bilinmeyen olarak gösteriyor.
sudo amdconfig --initial --force --adapter=all
sudo amdconfig --px-igpu
sudo reboot
ile yeniden başlatınca ne gösteriyor?
Bi değişme yok sanırım hala 7660g seçili diğer ise bilinmeyen olarak duruyor yani catalyst ile ekran kartını değiştiremiyorum
amdconfig --help
çıktısına bakayım.
you know the capabilities of your monitor before changing this option.
Screens start at 0. You can use 1 for dual-head
--vrefresh=Screen#,LOW-HIGH
Change the vertical refresh range of the specified monitor. Make sure
you know the capabilities of your monitor before changing this option.
Screens start at 0. You can use 1 for dual-head
--hsync2=LOW-HIGH
Change the horizontal sync range of the second display. Make sure you
know the capabilities of your monitor before changing this option.
--vrefresh2=LOW-HIGH
Change the vertical refresh range of the second display. Make sure you
know the capabilities of your monitor before changing this option.
--mode2=W1xH1,W2XH2,W3xH3,...
Change the modes for the second display. You may specify several
resolutions separated by commas. Only valid for clone and big desktop
settings.
--screen-layout={left|right|above|below}
Set the secondary screen position for dual head.
--screen-overlap=NUM
Set the screen overlap region in big desktop mode to be NUM pixels.
Advanced Options:
--sync-video={on|off}
Enable/disable sync to vsync for AVIVO video.
This option is enabled by default and is used to prevent
video tearing. By disabling this option video is free to
render as fast as the 3D engine can handle. In the case of
choppy video try to disable sync-video.
--tls={on|off}
Enable/disable fast thread local storage. Disable this option when
virtual machines or WineX fail to work properly.
--locked-userpages={on|off}
Enable/disable locked user pages. Disable this option if the system
hangs when running fgl_glxgears.
User page lock is no longer available on AGP system now.
--max-gart-size=VALUE1,VALUE2
Set user-defined max total GART size(VALUE1) and cacheable gart
size(VALUE2) for non-AGP systems.
This option can combined with --adapter option to set the gart size
for individual card.
Dynamic Display Management Options:
Following options will not change the config file. They are
used for querying driver, controller and adaptor information.
These options will be effective immediately. Other options on
the same command line will be ignored.
--enable-monitor=STRING,STRING
Setting current monitor to be enabled. Only 2 displays
can be enabled at the same time. Any displays
that are not on the list will be disabled.
STRING can be one of the following set, separated
by commas:
none
crt1
crt2
lvds
tv
cv
tmds1
tmds2
tmds2i
dfp3
dfp4
dfp5
dfp6
auto -- use default policy to enable the displays.
--query-monitor
This will return connected and enabled monitor information
--swap-monitor
This only works for big desktop setup. This will swap the
contents on the two monitors.
--swap-screens={on|off}
Enable/disable swap heads in dual-head mode.
This option works only in dual-head mode.
Pair mode options:
Following options are used for query add and remove pair modes.
These options will be effective immediately. Other options on
the same command line will be ignored.
--list-pairmode
list all the current existing pair modes the driver can use.
--add-pairmode=width0xheight0+width1xheight1
Add one pair mode to the list. width0 and height0 are the
size of primary display and width1 and height1 for the
secondary display.
--remove-pairmode=index
Remove one pair mode from the list. User can get index by
list-pairmode.
External Events Daemon Options:
Following options will not change the config file. They are
used to send commands to the atieventsd external events daemon.
--set-policy=STRING
Sets the event policy for the daemon to be STRING.
See the atieventsd(8) manpage for further details.
Display attribute options:
Following options are used for query and set adjustment of
specific attribute for specific display. These options will be
effective immediately. Other options on the same command line
will be ignored.
The DISPLAYTYPE in options can be one of the following strings:
crt1, lvds, tv, cv, tmds1, crt2,
tmds2, tmds2i, dfp3, dfp4, dfp5, dfp6 .
The ATTRIBTYPE in options can be one of the following strings:
brightness, contrast, saturation, hue, positionX,
positionY, sizeX, sizeY, overscan, videoStandard
--query-dispattrib=DISPLAYTYPE,ATTRIBTYPE
query the specific adjustment info of the specific display.
if ATTRIBTYPE is not specified, all supported attribute
information will be printed out.
--set-dispattrib=DISPLAYTYPE,ATTRIBTYPE:VALUE
set the attribute value of the specific display.
Connector type options:
Following options are used for query connector type
for specific display. These options will be
effective immediately. Other options on the same command line
will be ignored.
The DISPLAYTYPE in options can be one of the following strings:
crt1, lvds, tv, cv, tmds1, crt2,
tmds2, tmds2i, dfp3, dfp4, dfp5, dfp6 .
--query-connectortype=DISPLAYTYPE
query the connector type of the specific display.
Component video dongle options:
Following options are used for query and set dongles for a
component video. These options will be effective immediately.
Other options on the same command line will be ignored.
--query-cvdongle
query dongle setting informations of the component video.
--set-cvdongle=VALUE
set the custom override value of the CV dongle.
--reset-cvdongle
reset the custom override setting(to zero)of the CV dongle.
Component video customized mode options:
Following options are used for query and set customized mode for
component video. These options will be effective immediately.
Other options on the same command line will be ignored.
--query-cvmode
query customized modes for component video.
--add-cvmode=WIDTH,HEIGHT,FLAGS,BASEWIDTH,BASEDHEIGHT,REFRESH.
add a customized mode for component video.
--validate-cvmode=WIDTH,HEIGHT,FLAGS,BASEWIDTH,BASEHEIGHT,REFRESH.
validate a customized mode for component video.
--delete-cvmode=INDEX
delete one customized mode for component video.
Persistent Configuration Store (PCS) Options:
Following options will not change the config file. They are
used to manipulate the PCS database. Due to their nature, these.
commands may only be run by the root user. Note that the prefix
and key names are not case-sensitive.
--get-pcs-key=PREFIX,KEY
Prints out the specified prefix and key from the PCS
database. The type of data will be shown along with
the contents.
--set-pcs-u32=PREFIX,KEY,VALUE
--set-pcs-val=PREFIX,KEY,VALUE (deprecated)
Sets an integer value at the specified prefix and key in
the PCS database. The value may be specified in hex by
prefixing it with 0x or in octal by prefixing it with 0,
otherwise the value is assumed to be in decimal. Note
that --set-pcs-val is deprecated and --set-pcs-u32 should
be used instead. --set-pcs-val will be removed soon.
--set-pcs-u32array=PREFIX,KEY,VALUE[,VALUE]...
Sets an array of integer values at the specified prefix
and key in the PCS database. The values may be specified
in hex by prefixing it with 0x or in octal by prefixing
it with 0, otherwise the value is assumed to be in decimal.
(e.g. --set-pcs-u32array="TestSection,TestData,1,0x2,3")
--set-pcs-str=PREFIX,KEY,STRING
Sets a string value at the specified prefix and key in
the PCS database.
--set-pcs-raw=PREFIX,KEY,HEXSTRING
Sets a raw binary value at the specified prefix and key in
the PCS database. The value is specified as a series of
hex bytes with no 0x or spaces.
(e.g. --set-pcs-raw="TestSection,TestData,E84C0E" sets 3 bytes)
--set-pcs-bool=PREFIX,KEY,VALUE
Sets a boolean value at the specified prefix and key in
the PCS database. The value may be specified as either
"true", "yes", "on", "enable" or "1" meaning boolean TRUE or
"false", "no", "off", "disable" or "0" meaning boolean FALSE.
--del-pcs-key=PREFIX,KEY
Deletes the specified prefix and key from the PCS database.
Multiple display adapter options:
Following options are used for querying and setting up multiple
display adapters that are installed for multihead or Crossfire
configurations.
--lsa, --list-adapters
Lists all detected and supported display adapters.
The default adapter (used when --adapter is not specified)
will be indicated with a "*" next to it.
--adapter=ADAPTERLIST
Selects which adapters returned by --list-adapters should
be affected by other aticonfig options. ADAPTERLIST contains
either a comma-seperated sequence of the index numbers of the
adapters to be affected or else contains the keyword "all" to
select all the adapters. If --adapter is missing, only the
default adapter will be affected.
--lscc, --list-crossfire-candidates
Queries the driver to determine the pool of available devices that can
can be chained together for CrossFire.
--lscs, --list-crossfire-status
List current Crossfire status (enabled or disabled) along with diagnostics
information indicates the status of your system
--lsch, --list-mgpu-chains
Lists the MGPU chains that are currently defined along with their
enabled state
--cfa, --add-crossfire-chain
Defines a new CrossFire chain. --adapter should contain the adapter
chain definition, with the master adapter being the first entry and
the slave adapters being the subsequent entries in order of priority.
--cfd, --delete-crossfire-chain
Delete and existing defined CrossFire chain. --adapter should list the
master adapters of the chains to be deleted. --adapter=all will delete
all chain definitions.
--cf, --crossfire={on|off}
Enables/disables CrossFire support on the currently defined CrossFire
chains. --adapter should list the master adapters to be enabled or
disabled.
--cfl, --crossfire-logo={on|off}
Enables/disables the appearance of the CrossFire Logo when rendering
in CrossFire mode
--addch, --add-mgpu-chain
Defines a new MGPU chain. --adapter should contain the adapter
chain definition, with the master adapter being the first entry and
the slave adapters being the subsequent entries in order of priority.
--mgpu-sls={on|off}
Enables/disables MGPU-SLS(Multiple GPU Single Large Surface)support
on the currently defined MGPU chains. --adapter should list the
master adapters to be enabled or disabled.
--delch, --delete-mgpu-chain
Delete and existing defined MGPU chain. --adapter should list the
master adapters of the chains to be deleted. --adapter=all will delete
all chain definitions.
AMD Overdrive (TM) options:
The following options are used to get and set current and peak, core
and memory clock information as well as read the current temperature of
adapters. By using the "--adapter=" argument the AMD Overdrive (TM)
options can be targeted to a particular adapter in a multi-adapter scenario.
If no adapter is explicitly targeted the commands will be run on the Default
adapter as indicated by the "--list-adapters" command
--od-enable
Unlocks the ability to change core or memory clock values by
acknowledging that you have read and understood the AMD Overdrive (TM)
disclaimer and accept responsibility for and recognize the potential
dangers posed to your hardware by changing the default core or memory
clocks
--od-disable
Disables AMD Overdrive(TM) set related aticonfig options. Previously
commited core and memory clock values will remain, but will not be set
on X Server restart.
--odgc, --od-getclocks
Lists various information regarding current core and memory clock
settings.
Including: current and peak clocks
the theoretical range clocks can be set to
the current load on the GPU
--odsc, --od-setclocks={NewCoreClock|0,NewMemoryClock|0}
Sets the core and memory clock to the values specified in MHz
The new clock values must be within the theoretical ranges provided
by --od-getclocks. If a 0 is passed as either the NewCoreClock or
NewMemoryClock it will retain the previous value and not be changed.
There is no guarantee that the attempted clock values will succeed
even if they lay inside the theoretical range. These newly set
clock values will revert to the default values if they are not
committed using the "--od-commitclocks" command before X is
restarted
--odrd, --od-restoredefaultclocks
Sets the core and memory clock to the default values.
Warning X needs to be restarted before these clock changes will take
effect
--odcc, --od-commitclocks
Once the stability of a new set of custom clocks has been proven this
command will ensure that the Adapter will attempt to run at these new
values whenever X is restarted
--odgt, --od-gettemperature
Returns the temperature reported by any thermal sensors available on
the adapter.
ACPI Options:
--acpi-services=on|off
Enable/disable ACPI services. In the case of BIOS or kernel ACPI issues,
ACPI services in the driver can be disabled through this option.
The ACPI services are enabled by default.
--acpi-display-switch=on|off
Enable/disable display switching with ACPI methods on mobile platforms.
This option is enabled by default.
Genlock/Framelock options:
The following options are used to control operation with GLSYNC module
in the system. By using the "--adapter=" argument --glsync-getconfig,
--glsync-setconfig, --glsync-getgenlock, --glsync-setgenlock options
can be targeted to a particular adapter in a multi-adapter scenario.
If no adapter is explicitly targeted the commands will be run on the Default
adapter as indicated by the "--list-adapters" command
--glsync-getport={RJ45_1 | RJ45_2 | BNC}
Get configuration state for specified GLSync port.
Including: Number of LEDs
Scanned frequency
Signal Source for RJ45 port if it is configured as output
Port state (Input or Output) for RJ45 port
Signal type for BNC port
--glsync-setport=port_type,cntl,sig_src
Set configuration for specified GLSync port
Parameters: port_type - RJ45_1 or RJ45_2
only RJ45 ports can be configured
cntl - 0 if port is configured as input or
1 if port is configured as output
sig_src - signal source for GL Sync port
if 0-3 - GPU port index
if RJ45_1, RJ45_2 or BNC - another GL Sync port
if -1 - signal source is undefined
--glsync-getconfig
Get timing configuration for particular GL Sync connector
Including: Sync Delay in ms
Signal Source
Sample Rate
Sync field
Trigger Edge
Scan Rate multiplier
GPU port index this adapter connected to
--glsync-setconfig=delay,fr_cntl,sig_src,smpl_rate,fld,edge,coef
Set timing configuration for GL Sync connector
Parameters: delay - Sync Delay in ms
fr_cntl - Enable/Disable framlock control
0 Disable Framelock
1 Enable Framelock
sig_src - Signal Source for this adapter.
if 0-3 - GPU port index.
It can not be GPU port index of this adapter
if RJ45_1, RJ45_2 or BNC - GL Sync port
if -1 - signal source is undefined
smpl_rate - Sample Rate for sampled sync signal.
0 for no sampling
fld - Sync field for interlaced sync signal.
0 if sync field is undefined
1 if synced to both field
2 if synced to field 1
edge - it is defined which signal edge
should trigger synchronization
0 if edge is undefined
1 if it is triggered by raising edge
2 if it is triggered by falling edge
3 if it is triggered by both edges
coef - Scan Rate multiplier applied to sync signal
0 if coef is undefined
1 if coef is 5
2 if coef is 4
3 if coef is 3
4 if coef is 2.5
5 if coef is 2
6 if coef is 1.33
7 if coef is 1.25
8 if coef is 1.
9 if coef is 0.8
10 if coef is 0.67
11 if coef is 0,5
12 if coef is 0.4
13 if coef is 0.33
14 if coef is 0.25
15 if coef is 0.2
Note: Some parameters may not be valid for manual configuration.
Please use --glsync-getconfig command to verify.
--glsync-getgenlock=disp_type
Get genlock mode for particular display
disp_type - Display Type. When RandR 1.2 and above is enabled
can be query by using xrandr -q command.
If RandR 1.2 is not enabled
aticonfig --query-monitor command should be used
to query this parameter
--glsync-setgenlock=disp_type,mode,timing_server
Set genlock mode for particular display
Parameters: disp_type - Display Type.
When RandR 1.2 and above is enabled
can be query by using xrandr -q command.
If RandR 1.2 is not enabled
aticonfig --query-monitor command
should be used to query this parameter.
mode - Enable/Disable Genlock
0 Disable Genlock
1 Enable Genlock
timing_server - Enable/Disable timing server
0 to configure display as free run
1 to configure display as a timing server
--glsync-restart
Reinitialized all genlock settings after power down system
X Server Options:
--xinerama={on|off}
Enable/disable Xinerama (MultiView) in the X Server configuration file.
MultiView allows for the merging of independent desktop heads into a
unified workspace allowing windows to freely cross X Screen boundaries.
Uninstall options:
--uninstall{=force|dryrun}
dryrun tests uninstall but does not uninstall.
force removes all installed files without verification.
Uninstall without an option tries to perform the default uninstall procedure.
Miscellaneous Options:
-v, --verbose
Show what aticonfig is doing.
-q, --quiet
Disable all information output except for errors.
--effective={now,startup}
Choose when the requested changes should take effect.
now: Immediately. This change will affect the running X
session if applicable. Only 'set-powerstate' and
'overlay-on' are applicable for now.
startup: On future X server startups. This change will modify the
X server configuration file if applicable.
The default is 'now,startup', i.e., do both as applicable.
--nobackup
Do not make an automatic backup of the configuration file.
-i, --input=FILE
Select a FILE to input as the configuration file. Set FILE to '-' to
pipe from standard input. Without this option, aticonfig will search
/etc/X11 for the default configuration file.
-o, --output=FILE
Select a FILE to output the new configuration file to. Set FILE to '-'
to print to standard output. Without this option, aticonfig will
replace the input file with the newly generated file.
-h, --help
Display this help screen.
-f, --force
Only valid with 'initial' option. Force aticonfig to generate default
Monitor, Device, and Screen sections even if the original configuration
file has invalid settings in these sections.
Composite options:
--xv-pixmap-buffer-type=gartcacheable
Allocate pixmap buffer from GART cacheable heap.
--xv-pixmap-buffer-type=lfb
Allocate pixmap buffer from local framebuffer.
--xv-pixmap-buffer-type=gartuswc
Allocate pixmap buffer from GART USWC heap.
PowerXpress options:
Warning: Configure PowerXpress in console mode is not always be guaranteed to have effect.
--px-list-active-gpu
--pxl
List current activated GPU
--px-dgpu
Activate discrete GPU (High-Performance mode), must re-start X to take effect
--px-igpu
Activate integrated GPU (Power-Saving mode), must re-start X to take effect
Examples:
1. Setting up fglrx for the first time.
Single head : aticonfig --initial --input=/etc/X11/xorg.conf
Dual head : aticonfig --initial=dual-head --screen-layout=above
This command will generate a dual head configuration
file with the second screen located above the first
screen.
Multi head : aticonfig --initial --heads=4 --adapter=1
This command will generate 4 adjacent X Screens
on adapter 1. Use with -f to reduce previously configured heads.
2. Setting up big desktop to horizontal and set overlay on secondary display.
aticonfig --dtop=horizontal --overlay-on=1
3. Setting up modes for primary display.
aticonfig --resolution=0,1600x1200,1280x1024,1024x768
4. Change tv geometry
aticonfig --tv-geometry=85x90+10-10
This will set tv to 85% width (where 100% ==
overscan) 90% height and shift 10 pixels right of centre
and 10 pixels down of centre.
5. Multiple display adapters.
List adapters : aticonfig --list-adapters
Init 0 and 2 : aticonfig --adapter=0,2 --initial
Init all : aticonfig --adapter=all --initial
MultiView : aticonfig --xinerama=on
6. AMD Overdrive (TM).
List adapters : aticonfig --list-adapters
Get Clocks of 0 : aticonfig --adapter=0 --od-getclocks
Set new Clocks for 0 : aticonfig --adapter=0 --od-setclocks=770,1126
Test out 3D : atiode -P60 -H localhost:0; echo $?
Check Temperature of 0 : aticonfig --adapter=0 --od-gettemperature
Commit changes for 0 : aticonfig --adapter=0 --od-commitclocks
***note***
atiode is a stress application you start with a required
parameter -P which specifies the test duration and the optional
-H parameter to target a specific display to use. For example
atiode -P 600 -H localhost:0 would test display 0 for 10 minutes
the return code from the application is the test result
0: Test successfully completed.
1: Invalid command-line parameters.
2: Test failed because of rendering errors.
3: Target adapter not found.
4: Test aborted due to unknown reason
7. Framelock/Genlock with GL Sync module
Set GL Sync connector parameters for particular adapter:
aticonfig --glsync-setconfig=0,0,2,0.0,3,8 --adapter=1
Enable Genlock for particular display:
aticonfig --glsync-setgenlock=lvds,1,0 --adapter=1
Enable Timing Master:
aticonfig --glsync-setgenlock=dfp3,0,1 --adapter=1
Verify if the frequency is locked for particular display:
aticonfig --glsync-getgenlock=crt1 --adapter=1
Set GL Sync output port RJ45_1:
aticonfig --glsync-setport=RJ45_1,1,BNC
Reinitialize all genlock settings for all displays and adapters:
aticonfig --glsync-restart
Please report bugs to http://support.amd.com
sudo amdconfig --list-adapters
sudo amdconfig --px-list-active-gpu
çıktılarına bakayım. Hangi kart kullanılıyormuş öğrenelim.
list adapters
* 0. 00:01.0 AMD Radeon HD 7660G
1. 01:00.0 AMD Radeon HD 7600M Series
* - Default adapter
list active gpu
PowerXpress: Discrete GPU is active (High-Performance mode).
@Acracotoxin, harici kartı kullandığını söylüyor. fglrx-pxpress paketini kurup deneyebiliriz ama önce cat /sys/kernel/debug/vgaswitcheroo/switch
çıktısına bakayım.
Böyle bi dosya yada dizin yok diyor
cat: /sys/kernel/debug/vgaswitcheroo/switch: Böyle bir dosya ya da dizin yok
Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 02 Haziran 2014 - 19:43:23
@if, ilk önce erişim engellendi dedi sonra root olarak denedim böyle b dizin yok dedi
O zaman fglrx-pxpress paketini kuralım. Hatta sudo apt-get install linux-headers-$(uname -r) fglrx-pxpress
Ardından kartlar arasında geçiş yapmaya çalışalım: sudo amdconfig --px-igpu
komutundan sonra yeniden başlatın.
@if dediklerinizi yaptım fakat bi değişim sözkonusu değil hocam varmı tavsiyeniz
AMD'nin sunduğu sürücü denenebilir. Daha ne yaparız bilmiyorum.
14.04 de mi bi sorun var acaba ?
Başkaları var kartlar arası geçiş yapan. 3.15 serisi bir çekirdek kurabilirsiniz.
@if usr/share/ati kısmında install yönergesi gibi bişey var orada şu hata mevcut
[Error]A previous installation of fglrx driver detected to be loaded.
User must uninstall existing fglrx driver
or run install with force option.
Forcing the installation is not recommended.
neyi silmem gerekiyo ?
Tamamen temizlemek gerek.
https://forum.ubuntu-tr.net/index.php?topic=43214.0
@if gönderdiğin sayfadaki talimatlarını izledim fakat şu son iki kod tepkisiz kaldısudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf.backup
sudo rm -f /etc/ati
Bir çıktı vermez o komutlar zaten @Acracotoxin, herhangi bir hata meydana gelmedikten sonra. Tüm komutları sorunsuz uyguladıysanız, burdan[1] güncel sürücüyü yükleyebilirsiniz. Takıldığınız yer olursa buradan sorun.
[1] http://wiki.cchtml.com/index.php/Ubuntu_Trusty_Installation_Guide
@if hayırlı günler Hocam sürücüleri açık kaynak olarak tekrar yüklemeyi denedim 7670m i catalyst control centerda görebiliyorum fakat seçtiğim zaman çözünürlük 640x480 olarak tanımlı, değişiremiyorum ayrıca etkin yapıp kaydet deyince bi değişme sözkonusu değil.
Hayırlı günler @Acracotoxin. açık kaynak sürücü dediğiniz radeon mu? Bilgisayarınız için BIOS güncellemesi olup olmadığına bakar mısınız? sudo lshw
komutunun çıktısında "firmware" kısmı olacak. Orada description: BIOS
vendor: INSYDE
physical id: 0
version: R0200Z9
date: 04/19/2012
gibi bilgiler yer alır. Bunu üreticinin sitesindeki BIOS sürümüyle karşılaştırın.
@if çıktıyı şu şekile aldım fakat üreticimin bios sürümünü bulamadım
*-firmware
açıklama: BIOS
üretici: LENOVO
physical id: 0
sürüm: 60CN93WW
date: 10/23/2012
boyut: 128KiB
kapasite: 8128KiB
kapasiteler: pc_ upgrade shadowing cdboot bootselect edd int5printscreen int9keyboard int14serial int17printer int10video pc98 acp_ usb biosbootspecification netboot
ilk sorunuzun cevabı amd nin kendi sitesinden beta olan son driveri indirdim kurulumda ubuntunun depolarını değil diğer depoları kullandım
Eğer AMD'den kurduysanız sürücüyü kapalı kaynak sürücüdür.
Alıntı Yapkurulumda ubuntunun depolarını değil diğer depoları kullandım
cümlesini anlamadım.
Bilgisayarın modeli nedir? lshw çıktısında yazar.
bilgisayarın modeli lenovo z585
pardon hocam yanlış oldu sanırım amd nin driver setup kısmından suSE packages yazan yeri kurdum
dpkg -l | grep fglrx
çıktısına bakayım.
@if Buyrun
ii fglrx 2:13.350.1-0ubuntu2 amd64 Video driver for the AMD graphics accelerators
ii fglrx-amdcccle 2:13.350.1-0ubuntu2 amd64 Catalyst Control Center for the AMD graphics accelerators
sudo amdconfig --input=/etc/X11/xorg.conf --tls=1
sudo amdconfig --list-adapters
sudo amdconfig --px-list-active-gpu
çıktılarını alayım şimdi.
sudo amdconfig --input=/etc/X11/xorg.conf --tls=1Kod: [Seç] (//http://javascript:void(0);)No layout section was found in the file: '/etc/X11/xorg.conf'.
Please run 'aticonfig --initial' first or modify your configuration file manually and run aticonfig again.
amdconfig: parsing the command-line failed.
sudo amdconfig --list-adapters
* 0. 00:01.0 AMD Radeon HD 7660G
1. 01:00.0 AMD Radeon HD 7600M Series
* - Default adapter
sudo amdconfig --px-list-active-gpuNo layout section was found in the file: '/etc/X11/xorg.conf'.
Please run 'aticonfig --initial' first or modify your configuration file manually and run aticonfig again.
amdconfig: parsing the command-line failed.
sudo aticonfig --initial
sudo amdconfig --input=/etc/X11/xorg.conf --tls=1
sudo amdconfig --list-adapters
sudo amdconfig --px-list-active-gpu
Warning: Option 'UseFastTLS' doesn't affect running session.
Using /etc/X11/xorg.conf
Saving back-up to /etc/X11/xorg.conf.fglrx-3
* 0. 00:01.0 AMD Radeon HD 7660G
1. 01:00.0 AMD Radeon HD 7600M Series
* - Default adapter
PowerXpress: Discrete GPU is active (High-Performance mode).
sırasıyla bu şekilde
cat /etc/X11/xorg.conf
sudo amdconfig --px-igpu
ardından ctrl+alt+f2 > kullanıcı adı ve şifresi sudo service lightdm stop
sudo service lightdm start
giriş yapın sudo amdconfig --list-adapters
sudo amdconfig --px-list-active-gpu
çıktısını geçin.
* 0. 00:01.0 AMD Radeon HD 7660G
1. 01:00.0 AMD Radeon HD 7600M Series
* - Default adapter
PowerXpress: Integrated GPU is active (Power-Saving mode).
Şu an kullanıyor gömülü kartı.
hmm peki neden default atapter olarak 7660g gösteriyor?
Öntanımlı kart değer değişmez @Acracotoxin. Eğer hiç bir işlem yapmazsak öntanımlı olarak o kart kullanılacak. Biz özellikle diğerini seçtik. AMD kontrol merkezinde hangisi görünüyor şu an?
cat /etc/X11/xorg.conf
çıktısına da bakayım.
@if buyrun
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Default Card 0"
BusID "PCI:0@0:1:0"
EndSection
Section "Device"
Identifier "Default Card 1"
BusID "PCI:1@0:0:0"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:0:1:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
sudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf
sudo nano /etc/X11/xorg.conf
dosyası içine Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Default Card 0"
BusID "PCI:1@0:0:0"
EndSection
Section "Device"
Identifier "Default Card 1"
BusID "PCI:0@0:1:0"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1@0:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
yazıp kaydedin ve sistemi yeniden başatın bakalım. sudo amdconfig --list-adapters
sudo amdconfig --px-list-active-gpu
sudo nano /etc/X11/xorg.conf
bu kısma yazıp kaydetme işlemi nasıl gerçekleşiyor
Verdiğim örneği kopyala yapıştır yaptıktan sonra ctrl+o ile kaydeder ctrl+x ile çıkarsınız.
verdiğiniz örneğe benzer bi komut orada da mevcut silmemiz gerekir mi?
Hayır. ctrl+x ile çıkın ve değişiklik yapmayın.
sudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf.bak
sudo nano /etc/X11/xorg.conf
komutlarıyla tekrar açın dosyayı.
* 0. 00:01.0 AMD Radeon HD 7660G
1. 01:00.0 AMD Radeon HD 7600M Series
* - Default adapter
PowerXpress: Integrated GPU is active (Power-Saving mode).
dediğiniz komutlarla boş bir ekran açıkdı oraya verdiğiniz komutları girdim ve bilgisayarı yeniden başlattım
xorg.conf ayarlarıyla 7600M'yi öntanımlı kart yapmaya çalıştım, gördüğünüz gibi hâlâ diğeri öntanımlı görünüyor. Anlayacağız bu öntanımlı kartı seçmek bizim yapabileceğimiz bir şey değil. İsterseniz en son xorg.conf ile devam edersiniz isterseniz de sudo rm /etc/X11/xorg.conf
sudo cp /etc/X11/xorg.conf.bak /etc/X11/xorg.conf
komutları ardından amdconfig ile oluşturulan ayarlara dönersiniz.
Ha, şimdi aklıma geldi; Amd ayar yöneticisinden kullanılacak kartı şeçtikten sonra ayarları kaydet diyor muydunuz?
LC_ALL=C sudo amdcccle
ile açabilirsiniz.
Ayarları kaydettim bu arada herşey için teşekkürler forumda sizin gib insanların olması ne güzel.İnşallah bi şekile çözerim tekrar windowsa dönmek istemiyorum
Alıntı yapılan: Acracotoxin - 02 Haziran 2014 - 19:41:41
Böyle bi dosya yada dizin yok diyor
cat: /sys/kernel/debug/vgaswitcheroo/switch: Böyle bir dosya ya da dizin yok
Mesaj tekrarı yüzünden mesajınız birleştirildi. Bu mesajın gönderim tarihi : 02 Haziran 2014 - 19:43:23
@if, ilk önce erişim engellendi dedi sonra root olarak denedim böyle b dizin yok dedi
bu komuttan önce
sudo su
sonra
cat /sys/kernel/debug/vgaswitcheroo/switch
şeklinde denerseniz şöyle bir çıktı alacaksınız
0:IGD:+:DynPwr:0000:00:01.0
1:DIS: :DynOff:0000:01:00.0
tabi açık kaynak sürücü kullanıyorsanız. Daha ayrıntılı bilgi için buraya. (https://forum.ubuntu-tr.net/index.php?topic=43298.msg505974#msg505974)
Alıntı yapılan: Acracotoxin - 03 Haziran 2014 - 19:52:59
Ayarları kaydettim bu arada * her şey için teşekkürler forumda sizin gib insanların olması ne güzel.İnşallah bi şekile çözerim tekrar windowsa dönmek istemiyorum
Rica ederim @Acracotoxin. Sizin gibi arkadaşların sorununu çözünce ben de seviniyorum. Üstüne teşekkür şerbet oluyor:)
İllâ tek kart kullanacağım diyorsanız BIOS ayarlarına girip harici kartın kapatılıp kapatılmadığına bakabilirsiniz. Şu an çıktılardan harici ve dahili kart arası geçiş yapabildiğimiz görülüyor.
@can_66 çıktı alamadım sanırım açık kaynak olarak yüklü değil. Açık kaynak olarak nasıl yükleyebilirim?
https://forum.ubuntu-tr.net/index.php?topic=43214.0
@if bilgisayarı dediğiniz gibi açık kaynak sürücüler ile tekrar kurdum fakat bilgisayar açldığı zman parola ekranından sonrası gelmedi. ctrl+alt+f2 yardımıyla @can_66 'nın dediği çıktıları elde ettim fakat
glxinfo | grep "OpenGL renderer"
kodundan:
Error: unable to open display hatasını aldım.
ctrl+alt+f2 >
sudo service lightdm stop
sudo apt-get install --reinstall xserver-xorg-video-ati
sudo apt-get install --reinstall libgl1-mesa-glx libgl1-mesa-dri xserver-xorg-core
sudo dpkg-reconfigure xserver-xorg
sudo service lightdm start
@if hala açılmadı ve hala aynı hata mevcut
Alıntı yapılan: Acracotoxin - 04 Haziran 2014 - 12:10:57
@if bilgisayarı dediğiniz gibi açık kaynak sürücüler ile tekrar kurdum fakat bilgisayar açldığı zman parola ekranından sonrası gelmedi. ctrl+alt+f2 yardımıyla @can_66 'nın dediği çıktıları elde ettim fakat
glxinfo | grep "OpenGL renderer"
kodundan:
Error: unable to open display hatasını aldım.
Bunları sırayla deneyebilirs misin?
sudo rm /etc/X11/xorg.conf
sudo apt-get install --reinstall xserver-xorg-core libgl1-mesa-glx:i386 libgl1-mesa-dri:i386 libgl1-mesa-glx:amd64 libgl1-mesa-dri:amd64
sudo dpkg-reconfigure xserver-xorg
sudo reboot
@can_66 hocam açık kaynak kodlu driverler ile bilgisayarı açamayınca amd'nin kendi driverlerini geri yükledim. Neden çalışmadılar anlamadım
açık kaynak sürücüyü purge işleminden sonra sadece 32bit paketler kurulmamış olabilir. sistemin büyük ihtimalle 64bit diye düşündüm. birde eğer amd sitesinden indirdiğin sürücüyü yüklediysen ondan sonra açık kaynaklı olana geçmek için bu sürücünün kendi kaldırma komutunu kullanarak kaldırman lazım.yoksa sorun çıkarabiliyor.
Tamam amd'ninkileri kaldırabilirim fakat 64 bit olanı nasıl kuracam (sistem 64 bit)
amd sürücüsünü run dosyası ile kurduysan, şu şekilde kaldırman gerekecek.
sudo sh /usr/share/ati/amd-uninstall.sh
daha sonra bir önceki mesajımda belirttiğim şekilde açık kaynaklı sürücüyü kurmayı dene bir istersen.
Anladım fakat açık kaynak sürücüyü 64 bit olarak nasıl kurmam gerektiğini tarif ederseniz çok yardımcı olmuş olursunuz
işte yazdığım komut mesa ve diğer paketlerin hem 32 hem 64 sürümlerini çekip kuruyor.
Aynı kartı kullanıyorum bende,yani laptopumda harici olarak 7670M var,ayriyetten birde sistemde 6670m var işlemcinin üzerinde.
Yani sistemimiz tamamen aynı sayılır,sadece sizin işlemci üzerinde gelen kartınız farklı.
Yapmanız gereken öncelikle Ubuntuda yüklü gelen,veya yüklü değilse kendinizin de yükleyebileceği ''addictional drivers'' i kurun.
Sonra bu yazılımı çalıştırıp,en alttaki fglrx-updates (Yani açık kaynak kodluyu değil,sahipli amd sürücüsünü kuracaksınız) versiyonunu kurun,yani bu seçeneğe kurup aktif et diyeceksiniz.
Dediğimi yaptıktan,yani amd nin kendi sürücüsünü kurduktan sonra ;
https://forum.ubuntu-tr.net/index.php?topic=42160.0 bu başlığı inceleyin,aynı sorundan muzdariptim bende.
Çıktılarınızı inceledim,bir kez aktif etmişsiniz. (High performance mode yazan harici Grafik kartı yani 7670M)
7670m için açık kaynak kodlu sürücüyü kesinlikle tavsiye etmem bu arada.
Alıntı yapılan: iceboy - 04 Haziran 2014 - 19:45:01
Aynı kartı kullanıyorum bende,yani laptopumda harici olarak 7670M var,ayriyetten birde sistemde 6670m var işlemcinin üzerinde.
Yani sistemimiz tamamen aynı sayılır,sadece sizin işlemci üzerinde gelen kartınız farklı.
Yapmanız gereken öncelikle Ubuntuda yüklü gelen,veya yüklü değilse kendinizin de yükleyebileceği ''addictional drivers'' i kurun.
Sonra bu yazılımı çalıştırıp,en alttaki fglrx-updates (Yani açık kaynak kodluyu değil,sahipli amd sürücüsünü kuracaksınız) versiyonunu kurun,yani bu seçeneğe kurup aktif et diyeceksiniz.
Dediğimi yaptıktan,yani amd nin kendi sürücüsünü kurduktan sonra ;
https://forum.ubuntu-tr.net/index.php?topic=42160.0 bu başlığı inceleyin,aynı sorundan muzdariptim bende.
Çıktılarınızı inceledim,bir kez aktif etmişsiniz. (High performance mode yazan harici Grafik kartı yani 7670M)
7670m için açık kaynak kodlu sürücüyü kesinlikle tavsiye etmem bu arada.
hocam arkadaş x.org dosyası ile ekran kartı değiştirmiş. eğer her seferinde bunu yapacaksa büyük eziyet. çünkü oyun oynanmadığı zaman kapatılması lazım.kendi sistemim için konuşuyorum harici gpu devrede olduğu zaman uçak gibi çalışıyor.
Alıntı yapılan: can_66 - 04 Haziran 2014 - 19:54:05
Alıntı yapılan: iceboy - 04 Haziran 2014 - 19:45:01
Aynı kartı kullanıyorum bende,yani laptopumda harici olarak 7670M var,ayriyetten birde sistemde 6670m var işlemcinin üzerinde.
Yani sistemimiz tamamen aynı sayılır,sadece sizin işlemci üzerinde gelen kartınız farklı.
Yapmanız gereken öncelikle Ubuntuda yüklü gelen,veya yüklü değilse kendinizin de yükleyebileceği ''addictional drivers'' i kurun.
Sonra bu yazılımı çalıştırıp,en alttaki fglrx-updates (Yani açık kaynak kodluyu değil,sahipli amd sürücüsünü kuracaksınız) versiyonunu kurun,yani bu seçeneğe kurup aktif et diyeceksiniz.
Dediğimi yaptıktan,yani amd nin kendi sürücüsünü kurduktan sonra ;
https://forum.ubuntu-tr.net/index.php?topic=42160.0 bu başlığı inceleyin,aynı sorundan muzdariptim bende.
Çıktılarınızı inceledim,bir kez aktif etmişsiniz. (High performance mode yazan harici Grafik kartı yani 7670M)
7670m için açık kaynak kodlu sürücüyü kesinlikle tavsiye etmem bu arada.
hocam arkadaş x.org dosyası ile ekran kartı değiştirmiş. eğer her seferinde bunu yapacaksa büyük eziyet. çünkü oyun oynanmadığı zaman kapatılması lazım.kendi sistemim için konuşuyorum harici gpu devrede olduğu zaman uçak gibi çalışıyor.
Bende de aynı ekran kartı var,harici GPU devredeyken oyun oynamazsam fan dahi çalışmıyor hocam.Tabi benim söylediklerim amd nin kendi sürücüsü kurulu ise geçerli.
@iceboy bu şekildemi?
sudo amdconfig --px-dgpu
PowerXpress: Discrete GPU is selected (High-Performance mode), please restart Xserver(s) for changes to take effect!
Alıntı yapılan: Acracotoxin - 04 Haziran 2014 - 20:08:47
@iceboy bu şekildemi?
sudo amdconfig --px-dgpu
PowerXpress: Discrete GPU is selected (High-Performance mode), please restart Xserver(s) for changes to take effect!
Evet bu komut harici kartın çalıştığını gösteriyor.Bilgisayarı yeniden başlattığınızda veya xorg ortamını yeniden başlattığınızda artık siz tekrar değiştirene kadar hep harici kart aktif kalacaktır.
Anladım @iceboy, @if ile daha önce böyle bişey yapmıştık fakat anlamadığım nokta amd catalyst control centerde hala 7660g seçili gözüküyor